DNMG 150404 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9225 and the ISO DNMG geometry with a 0.4 mm corner radius for reliable mid-to-heavy steel turning; order the insert via Metav Werkzeuge or request advice from our consultants if clarification is needed. DNMG150404 T9225 Tungaloy indexable insert for turning – CVD-coated carbide, 55° rhombic The DNMG150404 T9225 is an ISO rhombic indexable insert designed for external and internal turning, offering a robust universal grade for medium-to-heavy steel machining where variable engagement or mildly interrupted cuts demand enhanced toughness. ISO DNMG geometry, 55° cutting angle CVD-coated carbide grade T9225 0.4 mm corner radius for versatile profiles Double-sided chipbreaker with cylindrical hole Consistent productivity under demanding cutting conditions The CVD-coated carbide grade T9225 delivers a deliberate balance of toughness and wear resistance, making this insert well suited to continuous and semi-interrupted steel turning operations. The coating increases tool life under heat and abrasion, while the substrate supports moderate impact loads; together they reduce tool change frequency and maintain steady production rates. Compatibility with holder systems is determined by form, relief angle, tolerance class, fastening method, size and thickness, so the insert integrates into existing tool programmes without compromising process stability. Improved surface quality and effective chip control A double-sided chipbreaker and the rhombic DNMG geometry provide reliable chip control and repeatable edge behaviour, which helps to achieve a consistent surface finish during roughing and finishing passes. The 0.4 mm corner radius offers a compromise between edge strength and profile definition, improving resistance to chipping while permitting tight diametral tolerances. The neutral 0° relief angle aids versatility across a range of cutting conditions; selecting the appropriate chipbreaker and feed rates ensures the best balance between material removal rate and part accuracy. System-level advantages and straightforward handling Supplied as an ISO-standard indexable insert, this component forms part of a complete tooling system comprising an appropriate external holder or boring bar, a 4.76 mm plate thickness, a shim/clamping set and replacement screws. The cylindrical hole facilitates precise locating and secure fastening, while the reversible, double-sided design extends usable life and reduces inventory cost per cutting edge. For shops seeking predictable performance in steel machining, choosing the right holder and cutting parameters together with this insert yields measurable gains in uptime and process reliability. For application-specific recommendations or to integrate this Tungaloy turning insert into a tooling programme, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our technical advisers will assist with holder compatibility and cutting data. Technical data Article number: 6780792 Manufacturer SKU: TUN6780792 Stock SKU: 6780792-Tungaloy Designation: DNMG150404 Core data Corner radius: 0.4 mm Relief angle: 0° Cutting angle: 55° Plate thickness: 4.76 mm Plate size: 15 mm Features Material: carbide Grade/coating: T9225 (CVD-coated carbide) Chipbreaker: double-sided Hole: with cylindrical hole Shape: rhombic Application: turning Series: ISO turning indexable inserts FAQ Is this insert suitable for steel turning applications? Yes. The DNMG150404 T9225 insert from Tungaloy is a robust universal grade designed specifically for medium-to-heavy steel machining, offering wear resistance and toughness for variable cutting conditions. Can the insert be used for both external and internal turning? Yes. The insert’s rhombic DNMG geometry and cylindrical hole allow use in external holders and appropriate boring bars for internal turning, provided the holder matches the ISO form, size and tolerance class. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker on this Tungaloy insert promotes controlled chip formation and consistent edge behaviour, improving surface finish and extending usable tool life through reversible indexing. What determines compatibility with a chosen holder? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the ISO DNMG series is designed to fit compatible external and internal holders when these parameters match Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9225 Wendeplatten - Tungaloy
Robust CVD-coated carbide in a standard ISO rhombic format delivers reliable performance for medium to heavy steel turning; compatibility with ISO holders and a secure cylindrical-hole clamping system ensures stable machining and repeatable results. Order the DNMG150404 T9225 insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. DNMG150404 T9225 Tungaloy indexable insert — Turning (ISO rhombic, 55°) The DNMG150404 T9225 is an ISO rhombic indexable insert engineered for medium to heavy turning operations, providing a rugged, CVD-coated carbide grade for stable chip formation and extended tool life. CVD-coated carbide Grade T9225 ISO rhombic DNMG 55° geometry Double-sided chipbreaker design Cylindrical hole for secure clamping Consistent performance with a universal carbide grade The insert is built from CVD‑coated carbide, a coating process that deposits hard ceramic layers onto the carbide substrate to enhance wear resistance and thermal stability. The T9225 designation denotes a robust universal grade intended for medium to heavy steel turning, particularly where variable engagement or light interruptions in the cut demand increased toughness. In practical terms, this means longer intervals between indexings and fewer tool changes, which supports efficient production flows and predictable component quality. The composition and coating together balance hardness and fracture resistance to suit a wide range of steels and typical workshop conditions. Stable clamping and geometry for precise cutting The ISO rhombic DNMG format with a 55° lead angle combines approach accessibility with edge strength, making it suitable for external and internal turning tasks. The insert features a 0° clearance angle and a cylindrical hole, ensuring secure, concentric clamping in standard holders and boring bars; compatibility depends on holder form, tolerance class and plate thickness. The double-sided chipbreaker contributes to repeatable chip control and predictable forces during the cut. These design elements reduce vibration and improve surface integrity, which is particularly valuable when machining components that require consistent dimensional accuracy. Workshop advantages and system compatibility Using an ISO-indexable insert like this one streamlines tooling logistics: the double-sided design offers multiple usable edges, reducing inventory and cost per edge compared with single-edge solutions. The rhombic shape and standard size mean easy replacement within an existing ISO tooling system; the 15 mm plate size and 4.76 mm thickness are compatible with common holders, and the insert is intended to work with appropriate underplates, clamping kits and replacement screws as part of the system. For interrupted cuts or variable feed conditions, the grade’s toughness and the chipbreaker geometry improve process security and extend effective tool life, supporting reliable, repeatable production. Contact Metav Werkzeuge for tailored machining data and to procure genuine Tungaloy DNMG150404 T9225 inserts — our specialists at Metav Werkzeuge can advise on holder selection and cutting parameters (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: 6944688 Manufacturer SKU: TUN6944688 Supplier SKU: 6944688-Tungaloy Designation: DNMG150404 Grade: T9225 Core data Corner radius: 0.4 mm Plate size: 15 mm Plate thickness: 4.76 mm Lead angle: 55° Clearance angle: 0° Special features Shape: rhombic (DNMG) Hole: cylindrical, with hole Coating/material: CVD-coated carbide Chipbreaker: double-sided Application: medium to heavy steel turning; suitable for interrupted cuts System: ISO-indexable insert compatible with standard holders and clamping sets FAQ What materials is this insert best suited for? The Tungaloy DNMG150404 T9225 insert is optimised for medium to heavy steel machining and performs well under variable engagement and light interruptions thanks to the tough T9225 grade. How many usable cutting edges are available? The double-sided chipbreaker provides multiple usable edges; reversing and re-indexing the insert extends the total number of cuts per insert and reduces tooling cost per edge. Which holders are compatible with this DNMG insert? Compatibility is dictated by ISO form, clearance angle, tolerance class, clamping method, size and thickness; the DNMG150404 fits standard ISO rhombic external holders and boring bars designed for 15 mm inserts. What benefit does the CVD coating bring? The CVD-coated carbide increases wear resistance and thermal stability at elevated cutting speeds, improving tool life and maintaining edge integrity in demanding turning operations. What are the exact identification codes for ordering? Relevant identifiers are SKU 6944688-Tungaloy and manufacturer article number 6944688; the manufacturer SKU is TUN6944688 and the ISO designation is DNMG150404. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9225 Wendeplatten - Tungaloy
High process stability and robust chip control are achieved by combining the CVD‑coated carbide grade T9225 with a 55° rhombic geometry and a 0.4 mm corner radius; the result is a reliable solution for medium‑to‑heavy steel turning. Order the insert directly via Metav Werkzeuge or consult our application specialists for advice on holder compatibility and chipbreaker selection. DNMG150404 T9225 — ISO turning insert for medium‑to‑heavy steel turning by Tungaloy The DNMG150404 T9225 is an ISO‑standard indexable insert designed for external and internal turning operations where interrupted cuts or variable engagement demand additional toughness and stable cutting performance. CVD-coated carbide grade T9225 Rhombic shape with 55° cutting angle 0.4 mm corner radius for edge strength Double-sided chipbreaker with cylindrical hole Reliable cutting performance under variable conditions The combination of a CVD‑coated surface and a carbide substrate delivers wear resistance and toughness for demanding turning tasks. The rhombic 55° geometry supports versatile approach angles, while the 0.4 mm corner radius increases edge robustness for mid‑to‑heavy axial depths. Thanks to the T9225 grade’s formulation, the insert offers stable performance during light interruptions and changing cut conditions, reducing the need for frequent edge changes and supporting continuous production. Designed for secure mounting and economical use ISO compatibility ensures straightforward integration with standard holders, but proper matching requires consideration of form, clearance angle, tolerance class, fastening and dimensions. The insert is double‑sided and indexable, providing economical use through two cutting edges per side. The cylindrical hole and a plate thickness of 4.76 mm contribute to secure clamping and axial stability, while the 15 mm inscribed circle keeps the insert compact for both external and internal assemblies. The nominal clearance angle of 0° must be matched to the holder specification to ensure correct chipflow and contact geometry. Coating, material and recommended applications A CVD coating on a high‑performance tungsten carbide body enhances thermal stability and abrasion resistance, making this grade particularly suitable for medium‑to‑heavy steel machining. The geometry and chipbreaker design support effective chip control; however, selection of the exact chipbreaker version should follow workpiece material, cutting data and machine rigidity. This insert is intended for turning operations where repeatable results and durable cutting edges are required, offering a balance of productivity and tool life for general steel turning tasks. For application support, material suitability checks and fast supply of Tungaloy DNMG150404 T9225 indexable inserts, contact Metav Werkzeuge or our consultants at Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 to discuss the optimal holder and chipbreaker combination. Technical Data Article number: 6780947 Manufacturer SKU: TUN6780947 Seller SKU: 6780947-Tungaloy Manufacturer: Tungaloy Facts Cutting angle: 55° Corner radius: 0.4 mm Plate thickness: 4.76 mm Inscribed circle: 15 mm Clearance angle: 0° Designation: DNMG150404 Grade: T9225 Special features CVD‑coated carbide Rhombic plate form Double‑sided chipbreaker Cylindrical hole for secure clamping ISO turning insert series Intended use: external and internal turning of steel Robust universal grade for medium‑to‑heavy steel and interrupted cuts FAQ What materials is this insert suitable for? The DNMG150404 T9225 insert from Tungaloy is optimised for medium‑to‑heavy steel turning and performs well under interrupted cuts and varying engagement conditions. How is the insert mounted and secured in the holder? The insert features a cylindrical hole and a standard ISO rhombic form; correct holder choice and matching of clearance angle and tolerance class are required for secure mounting of the DNMG150404 T9225. Can the insert be used on both external and internal turning applications? Yes, the ISO rhombic geometry and compact 15 mm inscribed circle make the DNMG150404 T9225 suitable for both external and internal turning tasks. How many cutting edges are available per insert? The DNMG150404 T9225 is double‑sided and indexable, offering multiple usable edges for economical operation and reduced tooling costs. What are the benefits of the T9225 CVD coating? The T9225 CVD coating on the carbide substrate increases thermal and abrasive resistance, improving edge life and process stability in steel machining with the DNMG150404 T9225. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9225 Wendeplatten - Tungaloy
Benefit from a robust CVD‑coated carbide grade and ISO‑standard geometry for stable medium-to-heavy steel turning; order the DNMG150404 T9225 directly via Metav Werkzeuge or ask our consultants if needed. DNMG150404 T9225 Tungaloy indexable insert for turning — CVD‑coated carbide, rhombic 55° The DNMG150404 T9225 is an ISO‑standard rhombic turning insert designed for external and internal turning, offering a universal grade tailored to changing engagement conditions and lightly interrupted cuts. CVD‑coated carbide grade T9225 ISO rhombic DNMG150404 form Suitable for medium-to-heavy steel turning Cylindrical centre hole for secure clamping Greater process reliability for medium-to-heavy steel turning The CVD‑coated carbide of grade T9225 delivers a balanced combination of wear resistance and toughness, making it suitable for demanding steel machining where conditions change or cuts are slightly interrupted. This balance contributes to longer tool life and more consistent component tolerances, reducing rework and machine downtime. Selecting this grade supports stable cutting when feed or depth of cut varies, which in turn improves overall productivity in batch and single‑piece production environments. Fast set‑up and repeatable clamping with ISO geometry The insert’s ISO standard designation and rhombic geometry ensure straightforward matching with common external holders and boring bars. Key geometrical data — 55° cutting angle, 0° clearance, 0.4 mm nose radius, and 4.76 mm plate thickness — are manufactured to ISO tolerances so that fitting and repeatability are reliable. Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; this standardisation reduces trial‑and‑error during tool selection and shortens changeover times on the shopfloor. Controlled chips and consistent surface finish for productive turning A double‑sided chipbreaker combined with the CVD coating reduces built‑up edge and supports stable chip formation, leading to a consistent surface finish and predictable cutting forces. The centre cylindrical hole and standard clamping form permit secure fixation, while the rhombic shape offers multiple indexed cutting edges for cost efficiency. The insert is intended to be used as part of a system — the insert together with a matched external holder or boring bar, a shim/clamp set and spare screws — to achieve repeatable, productive machining cycles in job shops and production departments. For reliable medium‑to‑heavy steel turning with proven carbide performance, contact Metav Werkzeuge for availability, compatibility advice and tailored holder recommendations for the Tungaloy DNMG150404 T9225 insert Technical data Article number: 6796071 Manufacturer SKU: TUN6796071 UID: 6796071-Tungaloy Designation: DNMG150404 T9225 Tungaloy indexable insert Core technical data Nose radius: 0.4 mm Cutting angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Insert size: 15 mm Special features CVD‑coated carbide grade T9225 Double-sided chipbreaker Rhombic insert geometry (DNMG) Cylindrical centre hole ISO‑standard turning insert for external and internal turning System components: insert, external holder/boring bar, shim/clamp and spare screws FAQ What materials is this insert suitable for? The DNMG150404 T9225 insert is designed primarily for steel machining and performs well in medium‑to‑heavy steel turning applications thanks to the CVD‑coated carbide grade. How is compatibility with a toolholder determined? Compatibility is determined by holder form, relief (clearance) angle, tolerance class, fastening type, insert size and thickness; the DNMG150404 designation simplifies selection when matching ISO holders. Does the insert provide reversible cutting edges? Yes — the double‑sided chipbreaker design allows indexing of multiple cutting edges, improving economy per insert. What chip control and surface finish can be expected? The combination of the double‑sided chipbreaker and CVD coating results in controlled chips and reduced built‑up edge, supporting a consistent surface finish and stable cutting forces. Which system components are required for correct assembly? A matched external holder or boring bar, a suitable shim/clamp set and the correct spare screws are required to assemble the system for productive turning with this insert. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 T9225 Wendeplatten - Tungaloy
Benefit from reliable ISO compatibility, a CVD-coated carbide grade optimised for variable engagement and a 0.4 mm corner radius that improves edge strength during medium-to-heavy steel turning. Order the DNMG150404 T9225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150404 T9225 Tungaloy turning insert — CVD-coated carbide, 55° rhombic geometry DNMG150404 T9225 is a rhombic ISO turning insert designed for robust medium-to-heavy steel machining applications ISO rhombic 55° geometry CVD-coated carbide T9225 0.4 mm corner radius for strength Double-sided with cylindrical hole Maximise process stability with ISO conformity and modern coating The ISO-standard rhombic shape supports predictable mounting and repeatable results in serial production. With a CVD-coated carbide body and the universal T9225 grade, the insert combines wear resistance with required toughness for interrupted or variable cuts. This balance delivers improved tool life and consistent dimensional control, reducing changeover frequency and keeping cycle times steady in demanding turning operations. Geometry tuned for secure clamping and consistent cutting A 55° rhombic form with a 0° clearance angle and a 0.4 mm corner radius provides a stable cutting edge and reliable engagement at the contact point. The double-sided design and cylindrical hole enable economical indexing and straightforward fixture compatibility. These features translate into lower tooling cost per part and a secure seating that minimises vibration, supporting superior surface finish and edge integrity on steel components. Practical application advice and system compatibility Intended for external and internal turning, the insert performs best when paired with a matching ISO holder, correct chipbreaker and suitable clamping set-up. Select the chip control and grade combination according to workpiece stability and feed conditions: the robust character of the Tungaloy insert favours medium-to-heavy cuts and variable engagement. For complex set-ups or material mixes, technical consultation ensures the insert is integrated into a productive, reliable tooling system. Contact Metav Werkzeuge today for application-specific recommendations and to secure DNMG150404 T9225 inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6780984 Manufacturer SKU: TUN6780984 SKU: 6780984-Tungaloy Facts Shape: rhombic, 55° included angle Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Hole: with cylindrical hole Sides: double-sided Material type: carbide Coating: CVD-coated Application: turning Special features Grade: T9225 — universal, robust for medium-to-heavy steel cutting System composition: ISO insert, matching holder and clamping set Typical use: external and internal turning Compatibility determined by form, clearance, tolerance class, fixing, size and thickness FAQ What materials is this insert suited for? The DNMG150404 T9225 insert from Tungaloy is designed primarily for medium-to-heavy steel turning and performs well under variable engagement and lightly interrupted cuts. How does the T9225 grade affect performance? The T9225 grade offers a balance of toughness and wear resistance; the CVD coating enhances life under fluctuating cutting conditions, making the insert suitable for productive steel machining. Can the insert be indexed and reused? Yes, the double-sided DNMG format allows indexing to a fresh edge; the cylindrical hole and ISO rhombic geometry support secure clamping and repeatable repositioning. Which holder and clamping should be used? Use an ISO-compatible external holder or boring bar specified for DNMG inserts; compatibility depends on the holder form, free angle, tolerance class, fixing method, size and thickness. What system parts are typically required? A full system comprises the ISO insert, a matching external holder or boring bar, a backing/locating element, clamping set and replacement screws as needed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9225 Wendeplatten - Tungaloy
The robust CVD-coated T9225 grade and the ISO DNMG150404 geometry deliver consistent performance for medium to heavy steel turning; the 0.4 mm corner radius and 55° rhombic form provide versatile edge engagement and controlled chip formation. Order the DNMG150404 T9225 indexable insert directly via Metav Werkzeuge or ask consultants for guidance. DNMG150404 T9225 indexable turning insert — 55° rhombic, CVD-coated carbide — Tungaloy A DNMG150404 T9225 indexable insert engineered for versatile external and internal turning, offering robustness for medium to heavy steel machining and reliability under variable cutting conditions CVD-coated carbide grade T9225 55° rhombic DNMG geometry 0.4 mm corner radius for versatility Double-sided chipbreaker, with cylindrical hole Stable cutting performance for medium to heavy steel machining The CVD-coated T9225 grade is formulated to combine wear resistance with enhanced toughness, making it well suited for medium to heavy steel operations and applications with mildly interrupted cuts. The coating reduces flank wear and helps maintain a defined cutting edge under varying engagement, which translates into longer effective tool life and fewer indexings. In practice, this improves process reliability and reduces unplanned tool changes, supporting continuous production runs and predictable output. Precise geometry and secure holder compatibility for consistent results The ISO DNMG150404 geometry with a 55° rhombic form and a 0.4 mm corner radius offers a balance between edge strength and finishing capability. Compatibility with a toolholder depends on form, relief angle (0° clearance), tolerance class, mounting method, size and thickness; the overall system typically comprises the insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. Selecting an appropriate chipbreaker and grade according to workpiece material and machining stability ensures controlled chip formation and repeatable results. Improved chip control and surface quality with economical handling The double-sided chipbreaker design and cylindrical centre hole permit two usable cutting edges per index and straightforward clamping for repeatable positioning. This arrangement supports efficient chip evacuation and consistent surface finish during both external and internal turning tasks. By reducing vibration and promoting stable cutting edges, the insert helps to safeguard component geometry and lowers the frequency of rework. For production environments, this translates into improved productivity and a favourable cost-benefit ratio when the insert is paired with the correct holder and machining parameters. Contact Metav Werkzeuge for technical advice or to order genuine Tungaloy DNMG150404 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780774 Manufacturer SKU: TUN6780774 SKU: 6780774-Tungaloy Model series: ISO turning inserts Grade: T9225 Material: carbide Coating: CVD-coated Dimensions / Key measurements Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Cutting edge angle: 55° Hole: cylindrical Features / Application Double-sided chipbreaker Rhombic shape, DNMG150404 Designed for external and internal turning Suited for medium to heavy steel machining System components: insert, holder/boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The DNMG150404 T9225 insert is designed primarily for medium to heavy steel machining; the T9225 CVD-coated carbide grade provides toughness for variable engagement and lightly interrupted cuts. Is the insert double-sided and indexable? Yes, the insert features a double-sided chipbreaker, providing two indexable cutting edges and economical usage in production settings. Which holder characteristics must be checked for compatibility? Compatibility depends on insert form, relief angle (0°), tolerance class, mounting method, size and thickness; ensure the toolholder matches the ISO DNMG150404 geometry and clamping arrangement. What surface finish and chip control can be expected? With the appropriate chipbreaker and cutting data, the insert delivers consistent chip formation and a reliable surface finish during external and internal turning. What are the article and manufacturer SKUs for ordering? Article number 6780774, Manufacturer SKU TUN6780774, and SKU 6780774-Tungaloy identify the genuine Tungaloy DNMG150404 T9225 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide robustness, a double-sided chipbreaker and precise ISO geometry for consistent medium-to-heavy steel turning; order the DNMG150404 T9225 indexable insert directly via Metav Werkzeuge or ask our consultants if required. DNMG 150404 T9225 — Turning insert (ISO DNMG150404) by Tungaloy A DNMG150404 T9225 indexable turning insert engineered for medium-to-heavy steel machining, offering a universal, tough grade and ISO compatibility for reliable workshop performance. CVD-coated carbide grade T9225 Robust universal grade for steel Double-sided chipbreaker design ISO DNMG150404, 55° approach angle Consistent metal removal for demanding turning tasks The insert is manufactured from CVD-coated carbide, a choice that combines wear resistance with toughness to handle varying engagement conditions. As a universal grade, T9225 is optimised for turning of medium-to-heavy steel where interrupted cuts or fluctuating cutting conditions demand greater edge strength. The result is stable metal removal and predictable component tolerances, with reduced downtime from fewer premature edge failures. Seamless compatibility with ISO toolholders for fast setup The ISO geometry DNMG150404 ensures compatibility with standard holders when the form, clearance angle, tolerance class, fastening method, size and thickness match. The rhombic form and a 55° approach angle deliver a balanced cutting vector for external and internal operations, while a 0° rake and a 4.76 mm plate thickness contribute to mechanical stability. These measurable parameters simplify holder selection and speed up tool changes on the shop floor. Durability that lowers operating costs and increases uptime With a double-sided chipbreaker and a 0.4 mm corner radius, this insert provides reliable chip control and extended edge life under tougher conditions. The robust universal grade reduces the frequency of insert changes and supports a cost-effective production flow by maintaining consistent surface finish and dimensional repeatability over longer tool life. Operational benefits include fewer interruptions, predictable regrinding intervals and higher cumulative productivity. For tailored advice or immediate availability of the Tungaloy DNMG150404 T9225 turning insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for application-specific recommendations and supply options Technical data Article number: 6796031 SKU: 6796031-Tungaloy Manufacturer SKU: TUN6796031 Model series: ISO turning indexable inserts Label: DNMG150404 T9225 Tungaloy indexable insert Facts Approach angle: 55° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 15 mm Rake angle: 0° ISO code: 150404 Special features Grade/coating: T9225 (CVD-coated carbide) Plate shape: rhombic Chipbreaker: double-sided Hole: cylindrical hole (with hole) Application: turning (external and internal) System: ISO DNMG150404 indexable insert FAQ What materials is this insert intended for? The DNMG150404 T9225 insert is designed as a robust universal grade for medium-to-heavy steel machining and is particularly suited to conditions requiring increased toughness. Which toolholders are compatible with this insert? Compatibility requires holders matching the DNMG form and ISO geometry; key factors are form, clearance angle, tolerance class, fastening, size and thickness to ensure correct seating and clamping. Can this insert handle interrupted cuts or varying engagement depths? Yes, the T9225 grade and the sturdy design are intended for changing engagement conditions and light interruptions, offering improved resistance to chipping. How does the double-sided chipbreaker affect cost-efficiency? The double-sided chipbreaker provides multiple usable edges and stable chip control, extending service intervals and reducing the frequency of insert replacements. What does the code DNMG150404 tell me? The code indicates the geometry (DNMG), size and thickness series (150404), with the final digits reflecting the corner radius (0.4 mm) and the standardised ISO configuration for straightforward toolholder selection. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated carbide grade and proven ISO geometry to improve cycle stability and tool life: the combination of T9225 grade and a 0.4 mm corner radius ensures reliable performance in medium-to-heavy steel turning. Order directly via Metav Werkzeuge or consult the technical team for compatibility and cutting-data optimisation. DNMG150404 T9225 turning insert — ISO turning insert, CVD-coated carbide (Tungaloy) A DNMG150404 T9225 insert for turning, engineered for medium-to-heavy steel machining with a rhombic 55° cutting geometry. DNMG150404 shape with 55° cutting angle CVD-coated carbide grade T9225 Double-sided chipbreaker for versatility 0.4 mm corner radius for reliable edge life High-performance grade for stable machining The T9225 grade is a CVD-coated carbide developed for robust, universal performance in steel turning tasks. Its balanced combination of hardness and toughness makes it suitable when cutting conditions vary or when slightly interrupted cuts occur. The coating improves wear resistance and contributes to consistent surface quality over longer tool life, which translates into fewer insert changes and improved productivity on the shop floor. Optimised geometry for repeatable results Equipped with the ISO rhombic form and a 55° cutting angle, this insert offers a stable cutting edge and good access for external and internal turning operations. The 0.4 mm corner radius reduces the risk of premature chipping while maintaining acceptable surface finish; the double-sided chipbreaker extends usable edges per insert and supports controlled chip formation for a wide range of feed rates. Such geometry is advantageous where set-up stability and repeatability are priorities. Practical compatibility and mounting considerations The insert follows ISO dimensions and includes a cylindrical hole, which supports straightforward mounting in compatible holders and boring bars. Compatibility depends on form, clearance angle, tolerance class, fixation and thickness, so matching the insert to the correct clamping system ensures secure seating and optimal performance. Technical data such as the 4.76 mm plate thickness and the ISO designation aid in selecting an appropriate holder and clamp set. Productivity and process reliability in daily use In machining processes where throughput and predictable tool life matter, this grade and geometry combination reduces downtime and enhances process security. The insert’s construction supports consistent chip control and improved edge stability under variable engagement conditions, contributing to higher first-pass quality and fewer in-process interruptions. For workshops focused on efficient turning of medium-to-heavy steel, the insert delivers measurable gains in process efficiency. Contact Metav Werkzeuge for application advice or to order the DNMG150404 T9225 insert; technical consultants are available to verify holder compatibility and cutting data by phone or email. Technical Data Article number: 6780884 Manufacturer SKU: TUN6780884 SKU: 6780884-Tungaloy Facts ISO designation: DNMG150404 Size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 55° Clearance angle: 0° With hole: cylindrical Special features Material: Hartmetall (carbide) Grade/coating: T9225 (CVD-coated) Plate form: rhombic Chipbreaker: double-sided Typical application: turning Compatibility factors: form, clearance angle, tolerance class, fixation, size, thickness FAQ What materials is this insert designed for? This insert in grade T9225 is optimised for the medium-to-heavy machining of steel, offering robustness where varied engagement or slightly interrupted cuts are expected. How is the insert mounted and secured? The DNMG150404 insert features a cylindrical hole for standard clamping; correct selection of holder and clamp set according to the ISO designation and plate thickness ensures secure mounting. How many cutting edges are available per insert? The double-sided chipbreaker design provides multiple usable edges; the exact count depends on indexing practice and wear criteria for each application using the DNMG150404 T9225 insert (SKU TUN6780884). Can this insert be used for internal turning? Yes, the rhombic ISO geometry and 55° cutting angle make it suitable for both external and internal turning operations when paired with an appropriate boring bar or holder. Are cutting-data recommendations available? Cutting parameters should be chosen according to workpiece material, machine rigidity and clamping. Metav Werkzeuge can provide tailored cutting-data recommendations for the DNMG150404 T9225 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9235 Wendeplatten - Tungaloy
Benefit from a combination of CVD‑coated carbide performance, robust rhombic 55° geometry and reliable chip control for stable turning results; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. DNMG150404 T9235 — ISO turning insert for turning, CVD‑coated carbide, 55° rhombic (Tungaloy) DNMG150404 T9235 is an ISO‑standard rhombic turning insert designed for productive external and internal turning of steel under interrupted or unstable cutting conditions ISO‑standard rhombic 55° geometry CVD‑coated carbide, tough grade T9235 Double‑sided insert with cylindrical hole Suitable for unstable or interrupted cuts Consistent performance where stability is limited The CVD‑coated carbide in grade T9235 delivers a tough cutting edge intended for steel machining at lower cutting speeds and for operations with interruptions or less rigid set‑ups. The rhombic 55° geometry together with a 0° relief angle provides a neutral cutting action that helps maintain dimensional control on external and internal turning. The combination of a 0.4 mm corner radius and the double‑sided chipbreaker supports predictable chip formation and reduces the need for frequent edge changes, which contributes to steadier productivity. Straightforward integration into ISO turning systems The insert follows ISO conventions, so holder compatibility is defined by form, relief angle, tolerance class, fastening method, size and thickness. The insert forms part of a compact system: ISO turning insert, matching external holder or boring bar, shim/clamp and replacement screws. This clarity simplifies inventory and change‑over: the rhombic shape and cylindrical hole ensure secure clamping and straightforward indexing, while the standard dimensions (15 mm size, 4.76 mm thickness) match common holder families. Economic machining for interrupted and unstable cuts Choosing a tough, CVD‑coated grade reduces flank wear under jerky or interrupted engagement and can lower total cost per cut by extending edge life. The insert’s design favours reliable performance rather than maximum speed, which is beneficial for shops prioritising repeatable results and reduced downtime. Technical consultation is available from Metav Werkzeuge for matching grade and chipbreaker to specific steels or operation types to optimise cutting data and hold productivity targets. Technical consultation and supply via Metav Werkzeuge are available for application matching and prompt delivery; contact Metav Werkzeuge for precise grade recommendations and stock information. Technical Data Article number: 6785927 Manufacturer SKU: TUN6785927 Shop SKU: 6785927-Tungaloy Insert designation: DNMG150404 Material: Carbide Coating/Grade: CVD‑coated T9235 Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 55° Relief angle: 0° Hole: cylindrical (with hole) Special features Rhombic insert form Double‑sided chipbreaker ISO‑standard turning insert series Designed for steel machining at lower cutting speeds Suitable for interrupted and unstable cuts Part of a system: insert, holder/boring bar, shim/clamp, replacement screws FAQ What materials is this insert suited for? The DNMG150404 T9235 insert is specified for machining steel; the T9235 grade is a tough, CVD‑coated carbide designed for lower cutting speeds and interrupted cuts in steel. How is the insert mounted and indexed? The insert uses a cylindrical hole for fastening and is compatible with ISO‑standard holders; the rhombic form and double‑sided design allow indexing by rotating or flipping the insert to engage a fresh cutting edge. Is the geometry suitable for internal turning? Yes, the 55° rhombic geometry and 0° relief angle make the insert appropriate for both external and internal turning where neutral cutting action and controlled chip formation are advantageous. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9235 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade (T9235) tailored for steel turning, combined with a double-sided chipbreaker that extends edge life and reduces index changes; order the insert directly via Metav Werkzeuge or consult the technical team for application support. DNMG 150404 T9235 turning insert — CVD-coated carbide, double-sided chipbreaker (Tungaloy) DNMG150404 T9235 is an indexable turning insert engineered for stable chip control and reliable performance in steel turning operations CVD-coated carbide for tough steel cuts Double-sided chipbreaker for consistent chips Rhombic DNMG shape with 55° cutting angle 0.4 mm corner radius for reliable edge strength Consistent chip control for demanding steel turning The CVD-coated carbide T9235 grade is formulated as a tougher cutting material for machining steel under lower cutting speeds and in less stable or interrupted cutting conditions. As a consequence, the insert provides improved wear resistance where shock and varying chiploads occur. The double-sided chipbreaker supports predictable chip formation and evacuation, reducing downtime for indexing and helping to maintain steady cycle times. This combination enhances process stability, which translates into more predictable batch output and fewer unplanned tool changes. Design features that simplify holder selection and setup The DNMG geometry (rhombic form with a 55° cutting angle) and the 0° relief geometry are standardised to fit ISO-compatible holders, but compatibility is ultimately determined by form, relief angle, tolerance class, fastening method, size and thickness. The insert has a 0.4 mm corner radius and a plate thickness of 4.76 mm, with a cylindrical mounting hole for positive clamping. Specifying the matching external holder, shim/clamp set and replacement screws ensures correct seat and secure fastening, avoiding runout and chatter while preserving surface finish quality. Economical operation and predictable lifetime in production As an indexable turning solution, the insert’s double-sided design supports multiple indexing positions, delivering a favourable cost-per-edge compared with brazed or solid tools. The rhombic DNMG form allows versatile use for both external and internal turning when used with the appropriate boring bar or holder. Where interrupted cuts or unstable setups are unavoidable, the tougher grade and chip control reduce catastrophic edge failure, increasing cumulative cutting time between regrinds or replacements. For those seeking improved throughput and lower tooling cost over time, this insert offers a pragmatic balance of robustness and efficiency. For specific application advice on the Tungaloy DNMG150404 T9235 insert and assistance in selecting matching holders or parameters, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical guidance Technical data Article number: 6785791 Manufacturer SKU: TUN6785791 Our SKU: 6785791-Tungaloy Designation: DNMG150404 T9235 Tungaloy insert Model series: ISO indexable turning inserts Material: Carbide Dimensions and specifications Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle: 15 mm Cutting angle: 55° Relief angle: 0° ISO code: 150404 Special features CVD-coated carbide grade T9235 Double-sided chipbreaker Rhombic (DNMG) geometry With cylindrical hole Suitable for external and internal turning Optimised for interrupted and unstable cuts FAQ Which materials is this insert intended for? The DNMG150404 T9235 insert is a tougher CVD-coated carbide grade optimised for machining steel, especially effective at lower cutting speeds and under interrupted or unstable cutting conditions. How does the double-sided chipbreaker affect tool life? A double-sided chipbreaker provides multiple usable cutting edges and consistent chip control, allowing for cost-efficient indexing and extended cumulative cutting time before replacement of the insert. How is holder compatibility ensured? Compatibility depends on matching the insert form, relief angle, tolerance class, fastening method, size and thickness; selecting an ISO-compatible DNMG holder with the correct clamp and shim set ensures proper seating and performance with the DNMG150404 T9235. What components are required to build a functional system? A complete system comprises the ISO insert, a suitable external holder or boring bar, a matching underlay/clamp set and replacement screws to secure the insert correctly. Can this insert be used for internal turning operations? Yes; the geometry and hole style permit use in both external and internal turning when combined with the appropriate boring bar and holder configuration. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9235 Wendeplatten - Tungaloy
Reliable performance for interrupted cuts is achieved by the combination of the CVD-coated carbide T9235 grade and the 55° rhombic geometry with a 0.4 mm corner radius, delivering stable chip control and extended edge life in unstable turning conditions. Order the DNMG150404 T9235 insert directly via Metav Werkzeuge or consult the team for application-specific advice. DNMG150404 T9235 — Rhombic 55° turning indexable insert by Tungaloy (CVD-coated carbide) The DNMG150404 T9235 is a CVD-coated cemented carbide indexable insert developed for external and internal turning where interrupted cuts or limited process stability require a tougher grade and robust chip control. CVD-coated carbide grade T9235 Suitable for interrupted cuts and unstable conditions Rhombic 55° geometry with 0.4 mm corner radius Double-sided insert with cylindrical hole Stable cutting performance for challenging turning tasks The combination of a CVD-coated surface layer and a tough carbide substrate gives predictable wear behaviour under interrupted or unstable cutting conditions. The T9235 grade is formulated for steel machining at moderate cutting speeds; its higher toughness reduces the risk of chipping during impacts and improves tool life across batch production or mixed-operation environments. This results in more consistent process windows, fewer unplanned tool changes and improved overall productivity. Seamless integration into ISO tool systems and quick indexation Manufactured to the ISO DNMG150404 form, the insert fits standard DNMG holders when the holder geometry, relief angle and tolerance class match. The 55° geometry provides versatile approach angles for external and internal turning, while the cylindrical hole ensures secure location and simple clamping. Double-sided construction offers two cutting edges per indexation, reducing tooling inventory needs and shortening downtime for edge changes. Compatibility is governed by form, clearance angle, tolerance and plate thickness, which simplifies tool planning in production. Better chip control and predictable surface results The modest 0.4 mm corner radius balances edge strength with achievable surface finish: the rounded corner absorbs cutting shocks and helps maintain a stable cutting edge, while the integrated double-sided chipbreaker promotes efficient chip segmentation in steels. For operations that require improved surface quality or where interrupted cuts occur, this geometry and chip control concept reduces the likelihood of built-up edge and enhances repeatability over multiple workpieces. Choosing the correct chipbreaker and feed parameters will further optimise finish and cycle time. For application recommendations tailored to Tungaloy CVD grades and to check holder compatibility for the DNMG150404 T9235, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and ordering support Technical data Article number: 6785828 Manufacturer SKU: TUN6785828 SKU: 6785828-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Cemented carbide Grade/coating: T9235, CVD-coated Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Angle: 55° Relief angle: 0° Hole: with cylindrical hole Special features ISO DNMG150404 format Rhombic plate shape Double-sided chipbreaker Suitable for external and internal turning Developed for steel machining under unstable conditions Cylindrical hole for secure clamping FAQ What materials is this insert intended for? The DNMG150404 T9235 insert is optimised for machining steel; the T9235 CVD-coated grade is selected for toughness and reliable performance in interrupted cuts and unstable conditions. Can the insert be used for both external and internal turning? Yes, the rhombic 55° geometry and ISO DNMG form make the insert suitable for both external and internal turning tasks when used with compatible DNMG holders. How is the insert secured in the holder? The insert features a cylindrical hole for positive location and clamping; correct holder selection must consider form, relief angle and tolerance class to ensure secure mounting. Does the insert offer more than one cutting edge? Yes, the design is double-sided, providing two indexable cutting edges and helping to reduce tooling inventory and changeover time. Which dimensions should be noted when selecting a holder? Key dimensions are plate size 15 mm, thickness 4.76 mm, corner radius 0.4 mm, and the ISO designation DNMG150404 (SKU 6785828-Tungaloy) to confirm holder compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a tough CVD-coated carbide grade and a compact rhombic geometry for reliable interrupted and unstable turning operations. Order or request a technical recommendation via Metav Werkzeuge to ensure the insert matches the chosen holder and machining conditions. DNMG 150404 T9235 indexable turning insert by Tungaloy — CVD-coated carbide, rhombic 55° The DNMG 150404 T9235 is an ISO-standard rhombic indexable turning insert for external and internal turning, designed to deliver robust edge stability in interrupted cuts and unstable machining conditions. ISO DNMG 150404 rhombic insert CVD-coated carbide grade T9235 0.4 mm corner radius for fine profiles Double-sided chipbreaker with cylindrical hole Stable cutting performance for interrupted and unstable turning The combination of a CVD-coated carbide substrate and the T9235 grade provides enhanced toughness for machining steel under interrupted cutting or less rigid set-ups. The coating supports edge protection while the carbide core absorbs impact loads, reducing the risk of chipping and unexpected tool failure. This results in more consistent cycle times and fewer indexings, which contributes directly to improved productivity in batch and job-shop environments. Precise fit and secure seating reduce downtime The insert conforms to ISO dimensions and a rhombic 55° geometry, ensuring predictable seating and repeatable orientation in compatible holders. With 0° relief and a 0.4 mm radius, the geometry is suitable for fine profiling and general turning tasks where edge robustness is required. The 4.76 mm thickness and the 15 mm inscribed circle provide stable support in the pocket, while the cylindrical hole enables secure clamping and straightforward indexing for minimal set-up time. Versatile system integration and application advice As part of an ISO indexable system, the cutting result depends on the match between insert, holder and clamping components. The double-sided chipbreaker offers two usable cutting edges per side, extending effective edge life and reducing tooling costs per part. Choose the chipbreaker and grade according to workpiece material, rigidity and cutting strategy; this insert is specified for turning tasks and excels where interrupted cuts or lower cutting speeds are necessary. Ordering, identification and manufacturer provenance The insert is supplied in the ISO DNMG150404 format with the T9235 grade, intended for turning operations where toughness is prioritised. Identification details allow straightforward reordering and stock management; the robust construction from Tungaloy supports operational reliability and repeatable performance across series production and small-batch work alike. Contact Metav Werkzeuge for a tailored recommendation and availability details for the DNMG 150404 T9235 insert from Tungaloy. Technical Data Article number: 6785929-Tungaloy Manufacturer article number: 6785929 Manufacturer SKU: TUN6785929 Brand: Tungaloy Model series: ISO indexable turning inserts Material: Carbide (CVD-coated) Facts Size (inscribed circle): 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Insert angle: 55° Special features ISO DNMG150404 rhombic geometry Grade: T9235 for steel, tough cutting conditions Double-sided chipbreaker Cylindrical hole for clamping Suitable for external and internal turning System components: insert, holder/boring bar, shim/clamping set and replacement screws FAQ What materials is this insert optimised for? The DNMG 150404 T9235 insert is optimised for machining steel and performs particularly well in interrupted cuts or less stable set-ups due to the tough T9235 grade. How many usable edges does one insert provide? With a double-sided chipbreaker and indexable geometry, the insert provides multiple usable edges before replacement, reducing tooling costs per part. Which holders are compatible with this insert? Compatibility depends on holder form, tolerance class, clamping method, size and thickness; the insert follows ISO DNMG dimensions for straightforward matching to standard external holders and boring bars. Is the insert suitable for finishing operations? The 0.4 mm corner radius and robust grade allow fine profiling, but selection between roughing and finishing should consider cutting parameters and machine rigidity. How does the CVD coating affect tool life? The CVD-coated carbide layer enhances edge protection and wear resistance under moderate cutting speeds, improving life in interrupted cuts compared with uncoated grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, a 0.4 mm nose radius and ISO compatibility to maintain steady production even under interrupted cuts; order directly via Metav Werkzeuge or consult our specialists for grade and holder matching. DNMG150404 T9235 Tungaloy indexable turning insert — CVD-coated cemented carbide for turning, 55° rhombic geometry A DNMG150404 T9235 indexable turning insert designed for external and internal turning, optimised for unstable conditions and interrupted cuts, compatible with ISO holders and standard clamping systems. CVD-coated cemented carbide T9235 Tough grade for interrupted and unstable cuts 0.4 mm nose radius, 55° rhombic geometry Double-sided insert with cylindrical hole Consistent tool life and predictable performance for steel turning The CVD-coated cemented carbide grade T9235 is formulated as a tough cutting material for machining steel when lower cutting speeds and variable conditions are expected. The coating increases resistance to abrasive wear while the substrate maintains edge integrity under shock from interrupted cuts. This combination delivers a measurable reduction in unplanned tool changes and helps to extend productive cutting time, supporting a more predictable process and lower overall machining costs. Geometry that balances surface finish and edge strength The 55° rhombic geometry with a 0.4 mm nose radius provides a compromise between strength and finish: the larger corner radius supports interrupted and semiroughing passes by distributing cutting forces, while still enabling an acceptable surface texture on the workpiece. The insert is double-sided, offering cost-effective indexing, and the central cylindrical hole ensures secure clamping in compliant ISO-standard holders. For operations where finish or cutting stability is critical, this geometry reduces vibration and stabilises chip formation. ISO compatibility simplifies holder selection and system setup As an ISO-standard insert from the ISO turning insert series, compatibility with a matching holder is determined by form, relief angle, tolerance class, clamping method, size and thickness. The insert integrates into a system comprising an indexable insert, external holder or boring bar, shim/clamping set and replacement screws. For shops upgrading tool setups or standardising across multiple machines, this conformity eases procurement and spare-part logistics and shortens setup time on the shop floor. Practical selection advice for interrupted and mixed operations Choose the T9235 chipbreaker and grade when machining steel with frequent interruptions or where component stabilisation is limited; select an alternative chipformer if continuous finishing at higher speeds is required. The insert’s thickness (4.76 mm) and plate size (15) contribute to mechanical stiffness, while the zero-degree relief angle offers a neutral clearance suited to general-purpose turning. Making the correct match between insert grade, chipbreaker style and holder stability yields greater productivity and fewer scrap incidents. For reliable selection and mounting advice on this Tungaloy insert, contact Metav Werkzeuge — our specialists will recommend the right chipbreaker and holder combination for the DNMG150404 T9235; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785926 Manufacturer SKU: TUN6785926 Our SKU: 6785926-Tungaloy Designation: DNMG150404 T9235 Tungaloy-Wendeplatte Dimensions and core data Size: 15 Thickness: 4.76 mm Nose radius: 0.4 mm Relief angle: 0° Geometry angle: 55° Hole style: cylindrical hole Materials and features Material: cemented carbide Coating / grade: T9235 (CVD-coated) Application: Turning (external and internal) Plate form: rhombic Chipbreaker: double-sided Model series: ISO indexable turning inserts FAQ Is this insert suitable for machining steel? Yes. The DNMG150404 T9235 insert uses a T9235 CVD-coated carbide formulation designed specifically for machining steel under lower cutting speeds and for interrupted or unstable cutting conditions. Can the insert be used on boring bars as well as external holders? Compatibility is ISO-based; the insert fits any matching ISO holder or boring bar provided form, relief angle, tolerance class, clamping and size correspond to the insert dimensions. What does the 0° relief angle mean for cutting? A 0° relief angle offers a neutral clearance that is versatile for general turning, balancing tool life and cutting forces; pairing this with the right chipformer improves chip control during interrupted cuts. How is the insert clamped in the holder? The insert features a central cylindrical hole for secure clamping; a corresponding shim and clamping set are required to complete the assembly in the holder system. Is this insert indexable and cost-effective? Yes. The insert is double-sided, allowing indexing to fresh cutting edges and reducing per-edge cost compared with single-use options. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9235 Wendeplatten - Tungaloy
Combines a tough CVD-coated carbide grade with a 55° rhombic geometry and a 0.4 mm corner radius to deliver reliable performance in interrupted or unstable turning operations — order the DNMG150404 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150404 T9235 indexable insert for turning — Tungaloy, CVD-coated carbide, 55° rhombic DNMG150404 T9235 Tungaloy indexable insert for ISO-compliant external and internal turning, designed for interrupted cuts and unstable machining conditions CVD-coated carbide grade T9235 Rhombic DNMG with 55° cutting angle 0.4 mm corner radius for robustness Double-sided chipbreaker, cylindrical hole Improved performance when machining unstable or interrupted cuts The combination of a CVD-coated surface and a tough carbide substrate in this grade was chosen to withstand low cutting-speed strategies and heavy interruption. The coating reduces adhesion and protects the cutting edge from thermal and abrasive wear while the substrate absorbs impacts, which results in more consistent edge life under variable conditions. As an indexable insert, the component enables fast tip changes, reducing non-productive time and maintaining machining stability when interruptions or vibration occur. Predictable fit and secure clamping for stable results Produced to the ISO DNMG form, the insert matches standard holders when the seat geometry, relief angle and tolerances correspond; the cylindrical hole aids positive location and repeatable clamping. The specified relief angle of 0° and the rhombic 55° geometry contribute to predictable cutting forces, helping to reduce chatter in less rigid set-ups. Clear compatibility between insert and holder simplifies process planning and avoids unexpected fit issues during tool changes. Lower cost per part through longer edge life and robust edge geometry The T9235 grade is formulated for toughness rather than maximum speed, making it suitable for steels and unstable cutting. The 0.4 mm corner radius increases edge strength and resistance to chipping, which reduces frequent indexings and part rework. Together, coating and substrate selection improve wear behaviour and help to lower the effective tooling cost by extending service intervals and maintaining surface quality across interrupted turning cycles. Practical guidance for integration into production For reliable results, match the insert’s double-sided chipbreaker and grade to the workpiece material and the cycle type (roughing vs finishing). Use a holder rated for DNMG 55° geometry and ensure secure clamping with correct torque on a compatible screw and clamp system. Typical applications include external and internal turning of steels where process instability or interrupted cuts are expected; selecting the right feed and cutting speed for a tougher grade will deliver steadier performance and fewer unscheduled stops. Choose Tungaloy DNMG150404 T9235 inserts from Metav Werkzeuge for tough, dependable turning performance — contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6785928 SKU: 6785928-Tungaloy Manufacturer SKU: TUN6785928 Brand: Tungaloy Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 55° Relief angle: 0° Special features Material: carbide Coating: CVD-coated Grade: T9235 Shape: rhombic (DNMG) Chipbreaker: double-sided Hole style: cylindrical hole Application: turning (external and internal) Model series: ISO turning inserts FAQ What materials is this insert designed for? The DNMG150404 T9235 insert is engineered primarily for steel machining; the T9235 carbide grade emphasises toughness for interrupted cuts and unstable turning operations. How does the chipbreaker affect cutting? The double-sided chipbreaker on this indexable insert improves chip control for varying depths of cut and helps maintain consistent surface quality during external and internal turning. Is this insert compatible with standard DNMG holders? Yes — the DNMG150404 conforms to ISO DNMG geometry; compatibility depends on holder form, relief, tolerance class and clamping style, and the insert’s cylindrical hole aids repeatable seating. What advantages does the CVD coating provide? The CVD-coated layer enhances flank and crater wear resistance and reduces adhesion at the cutting edge, which is particularly beneficial at lower cutting speeds and in unstable machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9235 Wendeplatten - Tungaloy
The combination of a CVD‑coated carbide grade optimised for steel and a 55° rhombic geometry ensures stable chip control and extended tool life in interrupted or unstable turning. Choose this insert for reliable external and internal turning operations and order directly via Metav Werkzeuge or request advice from our technical consultants. DNMG150404 T9235 Tungaloy turning insert — CVD‑coated carbide, 55° rhombic The DNMG150404 T9235 Tungaloy turning insert is an ISO‑standard indexable insert for turning steel, designed for low cutting speeds and unstable or interrupted cuts. CVD‑coated carbide for improved wear resistance 55° rhombic shape for versatile turning applications Double‑sided chipbreaker for two usable cutting edges Cylindrical hole with screw fastening for secure clamping Consistent performance in interrupted and unstable cuts The CVD‑coated carbide grade T9235 is formulated for steel machining at lower cutting speeds and under less stable conditions. The coating increases surface hardness and thermal stability, which translates into longer tool life and fewer insert changes during production. In practice, this means fewer interruptions on the shop floor and more predictable cycle times when turning parts with interrupted cuts or variable support. The combination of substrate and coating helps maintain a stable cutting edge even when feeds fluctuate, delivering repeatable dimensional results. Secure mounting and ISO compatibility for easy integration The insert follows ISO conventions, so compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic 55° geometry and cylindrical hole ensure positive clamping with standard screw systems; the 4.76 mm thickness and 15 mm size provide robust support in the pocket. Because the plate is double‑sided, each insert offers two cutting edges, improving cost efficiency per edge compared with single‑edged solutions. Clear compatibility reduces setup time and simplifies tool inventory management on the shop floor. Practical guidance for selection and application Select the double‑sided chipbreaker variant and the T9235 grade when turning steel components with interrupted cuts or lower cutting speeds. The 0.4 mm corner radius provides a balance between edge strength and surface finish; increase radius for improved edge robustness or reduce it for finer profiles. For internal turning, ensure adequate rigidity of the tool assembly and select feed and speed parameters compatible with the grade’s low‑speed optimisation. Proper coolant and stable clamping further enhance chip control and surface consistency, reducing rework and scrap. How this insert supports production reliability Using an ISO‑standard insert such as this improves interchangeability across tool systems and supports efficient stocking. The DNMG150404 geometry and the Tungaloy grade offer a practical compromise between productivity and process security, particularly for steel applications where chip control is critical. The result is fewer tool‑related stoppages and a more stable production rhythm, aiding both planning and cost control in batch and jobbing environments. Contact Metav Werkzeuge for availability and technical advice on Tungaloy DNMG150404 inserts and to discuss the best chipbreaker and clamping options for specific turning tasks Technical data Article number: 6785879 Manufacturer SKU: TUN6785879 SKU: 6785879-Tungaloy Model series: ISO‑Drehwendeschneidplatten Dimensions / Core data Insert designation: DNMG150404 ISO code: 150404 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Diamond angle: 55° Clearance angle: 0° Design / Special features Material: carbide Coating / grade: T9235 (CVD‑coated) Shape: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning (external and internal) FAQ What materials is this insert intended for? The T9235 grade and carbide substrate are optimised for machining steel, with the coating and substrate combination tailored to interrupted and unstable cutting conditions. How many cutting edges does one insert provide? This rhombic DNMG150404 insert features a double‑sided chipbreaker, offering two usable cutting edges per insert for cost efficiency. Is the insert compatible with standard ISO holders? Yes. The insert follows ISO geometry specifications; compatibility depends on holder form, tolerance class, fastening and pocket dimensions. What corner radius and thickness should be expected? The insert has a corner radius of 0.4 mm and a plate thickness of 4.76 mm, providing a robust edge for general turning tasks. Which chipbreaker should be chosen for unstable cuts? Select the double‑sided chipbreaker and the T9235 grade for interrupted or unstable cuts on steel to improve chip control and edge stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough CVD-coated carbide grade, stable 55° rhombic geometry and a double-sided design for economical turning in unstable or interrupted conditions; order the inserts directly via Metav Werkzeuge or request tailored advice from our consultants. DNMG 150404 T9235 indexable turning insert by Tungaloy — 55° rhombic geometry, CVD-coated carbide The DNMG150404 T9235 is an ISO-standard indexable turning insert designed for external and internal turning, offering a tough CVD-coated carbide grade suited to lower cutting speeds and interrupted cuts. CVD-coated carbide grade T9235 Rhombic 55° geometry, 0° rake angle Double-sided insert with cylindrical hole 0.4 mm corner radius for versatile profiles Proven toughness for interrupted turning and unstable conditions The included grade, T9235, is a CVD-coated carbide formulated to provide toughness under interrupted cuts and unstable machining conditions. This makes the insert particularly suitable for machining steel, where sudden impacts and variable chip loads can cause chipping with harder, more brittle grades. The CVD coating enhances flank and crater wear resistance while the carbide substrate absorbs shock, resulting in a more reliable cycle time and fewer unexpected tool changes. For production environments where process stability matters, this combination supports consistent part quality and reduced scrap rates. ISO standardisation ensures secure holder compatibility and fast setup Being part of the ISO turning insert family, the geometry and dimensions follow standard conventions so that compatibility with the toolholder is determined by form, relief angle, tolerance class, clamping method, size and thickness. This standardisation simplifies inventory decisions: the same insert geometry fits a broad range of holders designed for DNMG-style plates. The rhombic 55° geometry provides a balance between strength and accessibility, enabling effective external and internal turning while keeping tool changeovers straightforward and predictable. Durable coating and geometry translate into measurable workshop benefits The CVD-coated surface reduces abrasive wear and increases tool life in many steel applications, while the 0° rake angle and 0.4 mm corner radius create a stable cutting edge that helps maintain dimensional accuracy over longer runs. The double-sided, indexable design halves the effective cost per cutting edge compared with single-use inserts and reduces downtime for replacements. These technical characteristics together offer a tangible improvement in machining efficiency—less rework, fewer clamp adjustments and a better cost-per-part metric in mixed-batch production. Practical handling and mounting for efficient production flow The insert features a cylindrical locating hole and is available with standard 4.76 mm thickness and a nominal size of 15 mm, allowing secure clamping and repeatable positioning in compatible holders. The double-sided arrangement and ISO form make reindexing simple, so maintenance crews spend less time handling toolstock and more time keeping machines productive. When uncertainty arises about holder compatibility or application specifics, Metav Werkzeuge can advise on the correct clamping set, underlay and replacement screws for an optimized tool system. Contact Metav Werkzeuge for a tailored recommendation on the Tungaloy DNMG150404 T9235 insert and fast procurement support Technical Data Article number: 6785985 SKU: 6785985-Tungaloy Manufacturer SKU: TUN6785985 Manufacturer: Tungaloy Model series: ISO turning inserts Designation: DNMG150404 T9235 Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 55° Rake angle: 0° Special features Material: carbide Coating: CVD-coated carbide grade T9235 Plate form: rhombic Hole: with cylindrical hole Breaker: double-sided Application: turning (external and internal) FAQ Is this insert suitable for steel machining? Yes. The T9235 grade is a tough CVD-coated carbide designed specifically for steel machining at lower cutting speeds and in conditions with unstable or interrupted cuts, offering reduced chipping risk. How does ISO standardisation affect holder compatibility? ISO standardisation means compatibility is defined by form, relief angle, tolerance class, clamping method, size and thickness; using the DNMG150404 form ensures a wide range of compatible holders and predictable mounting. Can the insert be re-indexed to use multiple edges? Yes. This is a double-sided indexable insert, allowing the use of multiple cutting edges before disposal, which improves cost-efficiency per edge. What does the 55° rhombic geometry mean for machining? A 55° rhombic geometry offers a compromise between edge strength and tool access, making it versatile for both external and internal turning while maintaining rigidity for interrupted cuts. Which article or SKU should be quoted when ordering? Please refer to article number 6785985 or SKU 6785985-Tungaloy when enquiring or ordering this insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO conformity and the TH10 uncoated carbide grade for reliable turning performance and clean surface finishes; the rhombic DNMG form with a 0° clearance and a 55° cutting angle ensures robust engagement and predictable results in external and internal turning. Order directly via Metav Werkzeuge or contact our consultants for compatibility checks and quick supply. DNMG150404 TH10 Tungaloy indexable turning insert — rhombic ISO insert for turning with 55° geometry The DNMG150404 TH10 is an ISO rhombic indexable insert designed for general turning applications, optimised for non-ferrous materials and operations where an uncoated, sharp cutting edge reduces cutting forces and improves surface quality. ISO rhombic DNMG form for 55° application Sharp uncoated carbide TH10 for low cutting forces Double-sided chipbreaker for efficient chip control Cylindrical hole for secure mounting Reliable cutting performance for turning operations The insert combines an ISO-standard geometry with a sharp TH10 uncoated carbide grade, delivering consistently low cutting forces when machining non-ferrous alloys. The rhombic geometry provides a favourable 55° cutting angle that balances edge strength and surface finish; this makes the component suitable for both external and internal turning. The uncoated carbide edge helps to avoid built-up edge on soft, gummy materials, so the result is cleaner part surfaces and fewer secondary finishing steps. Predictable chip control and secure clamping A double-sided chipbreaker on the insert promotes effective chip segmentation, reducing the risk of long, tangled chips in single-pass turning. The insert is produced with a cylindrical hole and a standard clamping interface so that mounting is straightforward and repeatable; compatibility with holders depends on form, clearance, tolerance class, fastening method, size and thickness. The relatively neutral 0° clearance contributes to a robust cutting edge under variable cutting conditions, which supports process stability in less rigid setups. Practical selection and system compatibility guidance The insert is part of an ISO turning system consisting of an indexable insert, a matched external holder or boring bar, shim/clamping sets and replacement screws. When selecting grade and chipbreaker, match the TH10 uncoated carbide to the workpiece material and the intended stability of the setup: the uncoated grade performs best on non-ferrous materials and where low cutting forces are required. Because the insert is reversible, stock usage is optimised and tool-change frequency is reduced, supporting continuous, economical production. For application-specific advice on Tungaloy turning inserts, compatibility checks for holders, or to request stock availability from Metav Werkzeuge (SKU TUN6803286), contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt, technical assistance and fast supply. Technical data Article number: 6803286-Tungaloy Manufacturer SKU: TUN6803286 Manufacturer article number: 6803286 Brand: Tungaloy Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 55° Clearance angle: 0° Special features ISO rhombic DNMG150404 form Grade TH10, uncoated carbide Double-sided chipbreaker Cylindrical hole (with hole) Rhombic plate shape, neutral relief, reversible insert System components: insert, holder/boring bar, shim/clamping set, replacement screws FAQ What materials is this insert best suited for? The DNMG150404 TH10 insert from Tungaloy is optimised for non-ferrous materials and applications that benefit from an uncoated carbide cutting edge to keep cutting forces low and surfaces clean. How does the 0° clearance affect cutting performance? A 0° clearance on the DNMG150404 gives a robust cutting edge that resists chipping under variable conditions, contributing to stable cutting when the setup has limited rigidity. Can the insert be used on internal turning operations? Yes, the rhombic geometry and reversible design make the insert suitable for both external and internal turning; appropriate holder selection is required to ensure correct seating and clearance. Is the TH10 grade suitable for steel or hardened materials? TH10 is a sharp, uncoated carbide grade intended primarily for non-ferrous work; for steel or hardened materials, a different coated or specialised grade should be chosen. What determines compatibility with a tool holder? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; DNMG150404 inserts are compatible with holders designed for ISO DNMG plates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp universal grade, ISO conformity and easy mechanical compatibility for consistent turning results; order the DNMG150404 TH10 indexable insert directly via Metav Werkzeuge or consult our team for selection advice. DNMG 150404 TH10 — Tungaloy indexable insert for turning, rhombic 0.4 mm DNMG150404 TH10 provides a sharp, universal uncoated cutting edge for turning applications, optimised for non‑ferrous materials and processes that require low cutting forces and clean surface finishes ISO rhombic insert DNMG 150404 TH10 uncoated carbide grade 0.4 mm corner radius for fine turning Double-sided chipbreaker with cylindrical hole High-efficiency cutting with a sharp universal grade The TH10 grade is an uncoated carbide designed for operations where reduced cutting resistance and excellent surface quality are priorities. As a sharp, universal option, it supports lower feed forces and mitigates workpiece distortion when machining soft and non‑ferrous metals. This characteristic translates directly into shorter cycle times and fewer rework passes, improving process efficiency without sacrificing finish quality. The result is a solution that pairs economical cutting with reliable results. Reliable fit and ISO conformity for straightforward set-up Built to ISO-standard dimensions, the rhombic configuration ensures predictable seating and clamping in compatible holders. The rhombic shape together with a 0° relief and 4.76 mm thickness provides stable positioning under load and repeatable geometry for batch production. Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; correct matching avoids runout and preserves cutting-edge integrity. This consistency supports fast tool changes and reduces machine downtime. Operational advantages that increase productivity The double-sided chipbreaker promotes stable chip formation, helping to control swarf flow and maintain a secure cutting environment. By combining a stout carbide substrate with a precise corner radius of 0.4 mm, the insert balances strength and edge acuity for fine turning tasks. These engineering choices improve tool life and contribute to higher productivity, particularly in processes where surface appearance and dimensional reliability are critical. The insert is particularly well suited for external and internal turning where clean surfaces are required. Integration, handling and system components As part of a complete system, the indexable insert works in concert with a matching holder, underlay or clamping set and the correct fastening screws. The presence of a cylindrical hole facilitates secure mounting and straightforward indexing on double-sided inserts, while the double-sided chipbreaker extends usable edge count, lowering per‑cutting‑edge cost. For workshop planning, this means simplified spare-part management and predictable reconditioning cycles for production tooling. Contact Metav Werkzeuge for tailored selection advice on Tungaloy TH10 inserts and to check stock availability—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6803283 Manufacturer SKU: TUN6803283 Model series: ISO-Drehwendeschneidplatten Designation: DNMG150404 Application: Drehen Facts Material: Carbide Grade: TH10 Shape: Rhombic Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Angle: 55° Special features Double-sided chipbreaker Cylindrical hole / with hole Uncoated cutting edge ISO-standard interchangeability Typical system: insert + holder + shim/clamping set + spare screws FAQ Which materials are best machined with this insert? The DNMG150404 TH10 indexable insert by Tungaloy is optimised for non‑ferrous materials and applications where an uncoated, sharp edge promotes low cutting forces and a clean surface finish; it is therefore recommended for aluminium, copper alloys and similar workpiece materials. Is the cutting grade coated or uncoated? This insert is supplied in the TH10 uncoated carbide grade, chosen to provide a keen cutting edge that reduces friction and improves surface appearance in suitable materials. How is holder compatibility ensured? Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; matching the DNMG150404 dimensions with the corresponding external holder or boring bar secures correct seating and repeatable performance. Can this insert be used for both external and internal turning? Yes, the design and double-sided chipbreaker make the insert suitable for both external and internal turning operations when paired with the appropriate holder and machining parameters. What are the main advantages of choosing this Tungaloy insert? The main benefits are a sharp uncoated edge for reduced cutting forces, stable chip formation via the double-sided chipbreaker and ISO-conformity for fast tool changes and predictable results; the product combines efficiency with consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of uncoated carbide sharpness, ISO compatibility and a compact 0.4 mm corner radius for efficient external and internal turning. Order genuine inserts through Metav Werkzeuge or consult our specialists for application matching. DNMG150404 TH10 indexable turning insert — rhombic 55° geometry by Tungaloy DNMG150404 TH10 is a rhombic indexable insert designed for external and internal turning applications where low cutting forces and clean surface finishes are required ISO indexable insert DNMG150404 TH10 Uncoated carbide for low cutting forces Rhombic 55° geometry for versatile turning 0.4 mm corner radius, 4.76 mm thickness Cylindrical hole with double-sided chipbreaker Consistent ISO compatibility for trouble-free turning The ISO standard design ensures predictable fit and performance in ISO-compatible toolholders; compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The DNMG150404 TH10 insert is supplied in the established ISO format, which simplifies holder selection and stocking. This standardisation reduces set-up time on the shop floor and supports repeatable machining results when paired with appropriately specified external holders or boring bars. Low cutting forces and improved surface quality An uncoated carbide construction combined with the TH10 grade delivers a sharp, universal cutting edge that is optimised for non-ferrous materials and applications demanding low cutting forces. The double-sided chipbreaker encourages stable chip formation and easier evacuation, while the 0.4 mm corner radius contributes to a controlled cutting edge that balances edge strength with surface finish. These characteristics translate into fewer interruptions for edge dressing and a lower risk of built-up edge on soft alloys, improving throughput and part quality. System integration and measurable productivity gains Integration into a complete system is straightforward: a matching outer holder or boring bar, a shim/clamping set and replacement screws complete the assembly. The rhombic geometry at 55° gives flexibility for turning profiles and access in confined features, and the cylindrical hole supports reliable clamping and repeatable positioning. By choosing the correct chipbreaker and the TH10 grade for the workpiece, cutting forces and cycle times can be reduced, resulting in more consistent component tolerances and less tool variance across batches. For tailored application advice and prompt supply of genuine Tungaloy indexable inserts contact Metav Werkzeuge for technical matching and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6803326 Manufacturer SKU: TUN6803326 Model series: ISO turning indexable inserts Designation: DNMG150404 Grade: TH10 Material: Carbide Plate shape: Rhombic Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 55° Hole: with hole (cylindrical hole) Chipbreaker: double-sided Application: Turning Numbers Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 55° Clearance angle: 0° Article number: 6803326 Special features Uncoated carbide grade TH10 Double-sided chipbreaker Cylindrical hole for secure clamping Rhombic 55° geometry ISO-series insert compatible with standard holders Suitable for external and internal turning FAQ What materials is this insert best suited for? The insert is designed for non-ferrous materials and applications where an uncoated carbide edge provides low cutting forces and clean surface finishes. Can the insert be used for internal turning and boring operations? Yes, the rhombic 55° geometry and the secure cylindrical hole fastening make it suitable for both external and internal turning when used with the correct holder. How does the TH10 grade influence performance? The TH10 grade offers a sharp, universal edge that supports low cutting forces and good surface quality on softer alloys and non-ferrous materials, reducing the tendency for built-up edge. What does the 0.4 mm corner radius mean for edge strength and finish? A 0.4 mm corner radius strikes a balance between edge strength and surface finish—providing sufficient robustness while maintaining a fine machining profile. Is the insert reversible or single-use? The insert is double-sided with a double-sided chipbreaker, enabling indexation to a fresh cutting edge and extending effective tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH110 Wendeplatten - Tungaloy
Take advantage of a wear-resistant, PVD-coated carbide grade combined with ISO compatibility and a versatile 0.8 mm corner radius for stable, repeatable turning results. Order the insert directly via Metav Werkzeuge or contact their consultants for application-specific advice and availability. DNMG 150408 AH110 – Indexable turning insert, PVD-coated carbide, 0° relief | Tungaloy The DNMG150408 AH110 is an ISO‑standard rhombic indexable insert for external and internal turning, engineered for process-secure cutting where a sharp edge and high wear resistance are required. ISO DNMG 150408 rhombic indexable insert PVD-coated carbide grade AH110 for wear resistance Sharp cutting edge with 0.8 mm corner radius Double-sided chipbreaker, 0° relief angle High wear resistance that maintains process stability The PVD-treated carbide cutting edge in grade AH110 provides consistent performance under continuous turning operations. A PVD coating reduces abrasive wear and helps preserve the edge geometry, which translates into longer intervals between insert changes and fewer machine interruptions. This grade is designed for a combination of process security and a keen cutting edge, supporting both roughing and finishing with predictable results and improved cost efficiency. ISO compatibility and straightforward clamping reduce setup time Designed as part of the ISO turning insert family, the rhombic plate shape ensures compatibility with a wide range of standard holders and boring bars. The 55° geometry and 0° relief angle are clearly defined, and the insert’s cylindrical hole supports secure fastening. Because compatibility depends on form, relief, tolerance class, fastening method, size and thickness, the standardised DNMG format simplifies tool selection and stocking. The double-sided chipbreaker allows indexing, effectively doubling tool life per insert and lowering inventory complexity. Versatile cutting geometry for reliable surface quality With a 0.8 mm corner radius and a sharp edge profile, this indexable plate balances robustness and surface finish capability. A modest corner radius improves edge strength for interrupted cuts while still permitting acceptable surface quality in finishing passes. Selecting the appropriate chipbreaker and grade according to material and stability needs results in reduced rework and steady cycle times. Backed by the manufacturer’s production standards, the insert supports repeatable results and predictable tool life, making it a pragmatic choice for mixed-production turning environments. For tailored selection and availability of the Tungaloy DNMG150408 AH110 indexable turning insert, contact Metav Werkzeuge for expert application advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6803349 SKU: 6803349-Tungaloy Manufacturer SKU: TUN6803349 Designation: DNMG150408 AH110 Tungaloy-Wendeplatte Facts Corner radius: 0.8 mm Main angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Special features Material: carbide Coating/grade: AH110 (PVD-treated) Plate form: rhombic Chipbreaker: double-sided Hole: with cylindrical hole Series: ISO turning indexable inserts FAQ Is this insert suitable for both external and internal turning? The DNMG150408 AH110 indexable turning insert from Tungaloy is designed for both external and internal turning applications, with a rhombic form and 55° geometry that suit a wide range of holder types. What are the main advantages of the AH110 grade? AH110 is a PVD-coated carbide grade that offers wear resistance and a sharp cutting edge; in the DNMG150408 AH110 insert this supports process security and extended tool life during continuous turning. Can the insert be indexed to use both sides? Yes, the double-sided chipbreaker configuration allows indexing of the plate, effectively providing two usable cutting edges and improving overall productivity for the Tungaloy DNMG150408 AH110. Which corner radius is recommended for mixed turning tasks? The 0.8 mm corner radius of this insert offers a balance between edge strength and surface finish, making it suitable for mixed roughing and finishing operations where both robustness and quality are required. How does the 0° relief angle affect cutting performance? A 0° relief angle maintains a stable cutting geometry for certain holder setups; combined with the insert’s form and fastening it contributes to repeatable chip formation and steady machining results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH110 Wendeplatten - Tungaloy
Combining PVD-coated carbide AH110 wear resistance with the ISO DNMG150408 format ensures durable cutting edges and reliable process security for turning operations; order via Metav Werkzeuge or request application advice from our consultants for optimal integration into the production process. DNMG150408 AH110 — DNMG 150408 indexable turning insert (PVD-coated), Tungaloy The DNMG150408 AH110 is an ISO-format indexable insert designed for external and internal turning, delivering a sharp cutting edge and consistent performance in production environments. ISO DNMG150408 rhombic insert PVD-coated carbide AH110 for wear resistance Double-sided chipbreaker for stable performance Consistent edge life through PVD-coated carbide technology The combination of PVD-coated carbide and the AH110 grade gives a robust, wear- and crack-resistant cutting edge that supports continuous machining. The PVD (physical vapour deposition) coating adds a hard, thin layer that reduces adhesive wear and improves heat resistance; this means fewer interruptions for tool changes and a steadier surface finish during longer runs. For production planners, the outcome is a lower tool-change frequency and improved cycle-time predictability. ISO compatibility and reliable clamping for standard toolholders Supplied in an ISO DNMG150408 format, the insert fits holders that match form, clearance, tolerance class, attachment and thickness. Key dimensions are a 15 mm inscribed circle, 4.76 mm thickness and a 0.8 mm corner radius, while the geometry presents a 55° cutting angle with a 0° clearance angle, and a cylindrical hole for secure mounting. These measurable specifications simplify holder selection and ensure repeatable positioning, which translates into stable cutting conditions and reproducible results at scale. Versatile machining scope and economical productivity As a double-sided insert with a dedicated chipbreaker, the component allows both external and internal turning tasks while offering two usable cutting edges per index. The sharp cutting edge and fracture-resistant grade make it suitable where process security and a clean part finish are priorities. Choosing the correct chipbreaker and grade depending on material and machining stability optimises chip control and reduces rework. The result is improved component throughput and predictable tool performance across batches. For tailored recommendations on integrating Tungaloy inserts like DNMG150408 AH110 into production, contact Metav Werkzeuge for application support and ordering — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6803373 Manufacturer SKU: TUN6803373 Model series: ISO-Drehwendeschneidplatten WPL designation: DNMG150408 AH110 Tungaloy Label: DNMG150408 AH110 Tungaloy-Wendeplatte Mounting: with cylindrical hole Facts Inscribed circle: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Double-sided indexable insert Special features PVD-coated carbide (AH110) Rhombic plate geometry Cylindrical-hole fixing Double-sided chipbreaker Intended application: turning FAQ What machining tasks are best suited to this insert? The DNMG150408 AH110 insert from Tungaloy is intended for both external and internal turning operations where a sharp cutting edge and high process security are required. How does the AH110 grade affect tool life? The AH110 PVD-coated carbide grade provides increased wear resistance and chipping protection, which extends tool life under standard turning conditions compared with uncoated grades. Which holders are compatible with the ISO DNMG150408 format? Holders that match the DNMG form, the specified clearance and tolerance class, and accept a 15 mm inscribed circle with 4.76 mm thickness will be compatible with this insert. Can the insert be indexed to use multiple cutting edges? Yes, the insert is double-sided, allowing indexation to present fresh cutting edges and enhance economical use of the tool. What chip control can be expected with the built-in chipbreaker? The double-sided chipbreaker provides reliable chip formation for a range of turning operations; selecting the chipbreaker and grade to match workpiece material and machining stability improves chip evacuation and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH120 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide grade that resists wear and chipping and a double-sided chipbreaker that extends tool life and reduces downtime; order the DNMG150408 AH120 turning insert via Metav Werkzeuge or contact our consultants for application advice. DNMG150408 AH120 — DNMG Indexable Turning Insert for Turning (Tungaloy) The DNMG150408 AH120 is an ISO‑standard indexable turning insert designed for external and internal turning operations where a sharp cutting edge and consistent process security are required. ISO-standard indexable geometry PVD-coated carbide for wear resistance Double-sided chipbreaker for versatility Cylindrical hole, rhombic 55° geometry Higher uptime through wear‑resistant PVD coating and robust grade The AH120 grade is a PVD-coated, wear- and chipping‑resistant carbide formulated for turning where edge integrity and process reliability matter. Because the coating enhances hardness and thermal stability, the cutting edge keeps its geometry longer, which reduces the frequency of indexings and tool changes. The combination of a sharp edge and robust substrate supports stable metal removal rates and consistent surface finish during extended cycles, delivering a measurable productivity advantage on repetitive turning tasks. Fast, reliable clamping and straightforward holder compatibility Compatibility is ensured by ISO‑conformant geometry: form, clearance angle, tolerance class, fastening method, size and thickness determine the correct holder fit. The rhombic plate form with a 55° principal cutting edge and a cylindrical hole is designed for secure screw clamping in standard DNMG holders. The 0° clearance angle and 4.76 mm plate thickness provide mechanical stability under moderate cutting forces, while the 0.8 mm corner radius balances edge strength and profile fidelity. This predictable fitment reduces setup time and simplifies tool inventory management. Application guidance for efficient turning operations Designed specifically for turning, the insert is suitable for both external and internal operations; selection of the chipbreaker and grade should match workpiece material, machining method and assembly rigidity. The double-sided chipbreaker permits two usable edges per side, facilitating economical indexing strategies. When consistent edge performance is a priority—such as in series production or where part tolerance is tight—this insert grade supports reliable results and minimises process interruptions. For bespoke applications or uncertain material mixes, consultation on feed and speed recommendations is advised. For machining projects that demand process security and longer tool life, contact Metav Werkzeuge for availability and holder matching; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the DNMG150408 AH120 and suitable clamping solutions. Technical data Article number: 6810199 Manufacturer SKU: TUN6810199 Item SKU: 6810199-Tungaloy ISO designation: DNMG150408 Grade: AH120 Facts Corner radius: 0.8 mm Plate size: 15 mm Thickness: 4.76 mm Clearance angle: 0° Geometry angle: 55° Hole style: cylindrical, with hole Special features PVD-coated carbide Double-sided chipbreaker Rhombic plate form ISO‑standard indexable turning inserts Suitable for external and internal turning FAQ What materials is this insert intended to machine? The DNMG150408 AH120 insert is a PVD‑coated carbide grade optimised for general turning applications where a sharp edge and process security are required; final material compatibility should be verified against specific workpiece alloys. How does the AH120 grade improve tool life? The AH120 grade combines a wear‑resistant substrate with a PVD coating that increases thermal stability and hardness, helping the DNMG150408 AH120 insert retain edge geometry and resist chipping under continuous turning conditions. Is the insert compatible with standard DNMG holders? Yes, the ISO‑conformant DNMG150408 geometry, including the cylindrical hole and rhombic profile, is designed for secure clamping in standard DNMG holders when dimensions and tolerance classes match. How many cutting edges are available per insert? The double‑sided chipbreaker offers multiple usable cutting edges, enabling economical indexing and extended use before replacement of the DNMG150408 AH120 insert is required. What are the key dimensional specifications to check when selecting a holder? Check corner radius (0.8 mm), plate size (15 mm), thickness (4.76 mm), clearance angle (0°) and the cylindrical hole position to ensure proper seating and clamping of the DNMG150408 AH120 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide AH120 for extended wear resistance and a precise 55° rhombic geometry with a 0.8 mm corner radius to maintain consistent profile accuracy; order the insert directly via Metav Werkzeuge or consult the advisers for application-specific guidance. DNMG150408 AH120 — Tungaloy ISO turning insert, 55° rhombic, PVD-coated The DNMG150408 AH120 is a robust ISO turning insert designed for external and internal turning operations where a sharp cutting edge and process reliability are required. PVD-coated carbide AH120 for high wear resistance 55° rhombic shape with 0° relief angle 0.8 mm corner radius for precise profiling Double-sided chipbreaker, cylindrical hole for secure clamping Reliable cutting performance for productive turning The insert delivers a stable cutting edge and repeatable performance thanks to the AH120 PVD coating on a hardened carbide substrate. The coating increases resistance to abrasive wear and reduces flank wear during continuous cuts, which leads to longer tool life and fewer indexings. In practical terms, this means lower tooling consumption and more predictable cycle times when machining common turning tasks. The ISO conformity of the geometry facilitates replacement in standard holders; compatibility is determined by form, relief, tolerance class, fastening and the insert's size and thickness. Predictable chip control and surface quality Built with a double-sided chipbreaker, the geometry actively controls chip formation in a wide range of cutting conditions, improving evacuation and reducing re-cutting. For users seeking a consistent surface finish, the sharp edge preparation combined with the chipbreaker design reduces built-up edge and chatter risk, especially in interrupted or light finishing cuts. The 0° relief angle and 0.8 mm corner radius promote a defined cutting profile that supports stable cutting forces and helps maintain tolerances on turned features. Practical compatibility and mounting guidance The insert’s rhombic form with a 55° included angle and the cylindrical hole ensure secure clamping in suitable ISO holders and boring bars. When selecting a holder, match the insert by geometry, free angle, tolerance class, fastening type, size and thickness to guarantee proper seating and clamping force distribution. The name and designation indicate the series and size, aiding accurate replacement planning and inventory management; for specialised setups or unusual materials, technical advice is recommended to select the correct chipbreaker and grade combination. Application suitability and material scope The AH120 grade is engineered as a wear- and fracture-resistant grade for turning applications where a sharp cutting edge and process reliability are both necessary. The insert is suitable for general turning tasks and is particularly effective in stable set-ups where edge integrity and predictable tool life are priorities. For materials that demand different edge life characteristics or higher thermal resistance, consider alternative grades or coatings matched to the specific workpiece material and cutting parameters. Contact Metav Werkzeuge today for tailored application advice and to order Tungaloy DNMG150408 AH120 inserts; eMail: info@metav-werkzeuge.com or Telefon: +49 2822 7131930 Technical data Article number: 6854297 Manufacturer SKU: TUN6854297 Name: DNMG150408 AH120 Tungaloy turning insert Model series: ISO turning indexable inserts Material: Carbide (PVD coating AH120) Manufacturer: Tungaloy Facts Inscribed circle: 15 mm Plate thickness: 4.76 mm Included angle: 55° Relief angle: 0° Corner radius: 0.8 mm Hole: with hole (cylindrical) Special features Rhombic plate form Double-sided chipbreaker PVD-coated carbide grade AH120 Suitable for external and internal turning Compatibility depends on holder form, free angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The AH120 grade insert is designed as a wear- and fracture-resistant solution for turning operations; its PVD-coated carbide construction suits a broad range of common turning materials under stable conditions. How is compatibility with a holder ensured? Compatibility is achieved by matching the insert geometry, free angle, tolerance class, fastening method, size and thickness to the holder; the DNMG150408 form and the cylindrical hole require a corresponding ISO-compatible clamping system. Can the insert be used for finishing passes? Yes — the sharp edge preparation and 0.8 mm corner radius support fine finishing cuts where a defined profile and good surface quality are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH120 Wendeplatten - Tungaloy
The combination of the AH120 PVD-coated carbide grade and the rhombic DNMG150408 geometry delivers a sharp cutting edge with high wear resistance and reliable chip control for turning applications; order the original Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application support. DNMG150408 AH120 indexable turning insert — rhombic 55° for precision turning by Tungaloy The DNMG150408 AH120 is an ISO‑standard rhombic indexable insert for external and internal turning, engineered for stable chip formation and consistent process performance when a sharp cutting edge and elevated wear resistance are required. DNMG150408 ISO geometry for universal turning AH120 PVD-coated carbide for wear resistance Double-sided chipbreaker for reliable chip control Rhombic 55° shape with 0° clearance Precise edge life and thermal stability for uninterrupted turning The AH120 is a PVD-coated carbide grade designed for a balance of wear resistance and edge toughness, which helps maintain cutting performance over longer tool paths. The thin, hard PVD coating reduces flank and crater wear while preserving a sharp cutting edge, resulting in consistent dimensional accuracy and extended tool life. For production environments where reproducible results and reduced tool change frequency matter, this coating-technique combination contributes directly to lower downtime and improved machining economy. Geometry and mounting that simplify tool system setup The rhombic 55° geometry with a 0° relief angle provides versatile approach angles suitable for a wide range of turning tasks. The insert’s cylindrical hole and standard ISO form ensure holder compatibility when matched by form, relief angle, tolerance class, fastening method, size and thickness. This makes integration into an existing turning system straightforward: the insert pairs with an appropriate external holder or boring bar along with the necessary clamp set and fastening screws to form a stable assembly. Chip control and surface quality with minimal rework Equipped with a double-sided chipbreaker, this insert actively shapes and controls chips during cutting, reducing the risk of tangled swarf and improving chip evacuation in both roughing and finishing passes. Better chip control contributes to consistent surface finishes and fewer interruptions in automated or long-run operations. When combined with the grade’s edge stability, the result is reliable surface quality and fewer downstream processing steps. Dimensions and practical considerations for selection Key dimensions such as the 0.8 mm corner radius and 4.76 mm plate thickness influence feed choices and depth of cut; the modest corner radius supports a balance between strength and fine surface finish. The insert’s 15 mm size and ISO designation simplify selection for standard holders. Selection should consider workpiece material and desired cutting parameters: the system is optimised for turning tasks where process reliability and a sharp cutting edge are priorities, and it performs especially well in applications demanding consistent, repeatable results. For high process reliability select the Tungaloy AH120 DNMG150408 insert and contact Metav Werkzeuge for technical consultation or ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6811735 Manufacturer SKU: TUN6811735 SKU: 6811735-Tungaloy Brand: Tungaloy Data ISO designation: DNMG150408 Grade/coating: AH120, PVD-coated Material: carbide Shape: rhombic Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Insertion angle: 55° Insert size: 15 mm Special features Double-sided chipbreaker Cylindrical hole for fastening ISO-standard indexable turning insert Suitable for external and internal turning System includes holder compatibility with external holder or boring bar FAQ What materials is this insert suitable for? The DNMG150408 AH120 insert is a PVD‑coated carbide grade formulated for general turning tasks where a sharp cutting edge and wear resistance are required; compatibility with specific workpiece materials should be confirmed against machining parameters. How does the AH120 grade affect tool life? The AH120 PVD coating improves wear resistance and edge stability, which typically extends insert life under comparable cutting conditions and supports consistent component quality. Which holder types fit this insert? Compatibility depends on form, relief angle, tolerance, fastening and size; the insert is designed for use with standard external holders or boring bars that accept ISO DNMG150408 inserts and the associated clamp set and screws. Can the insert be reversed for a second cutting edge? Yes, the insert is double‑sided with a double-sided chipbreaker, allowing indexation to a fresh edge to extend the usable lifetime within the same insert. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius offers a compromise between edge strength and surface quality—providing robust performance on moderate feeds while still enabling good surface finishes when parameters are set accordingly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com