DNMG 150408 AH6235 Wendeplatten - Tungaloy
Take advantage of a tough, PVD-coated carbide grade designed for challenging applications; the combination of ISO conformity, a rhombic 55° geometry and a double-sided chipbreaker reduces downtime and improves process stability. Order or request tailored holder recommendations from Metav Werkzeuge for immediate integration. DNMG 150408 AH6235 Tungaloy turning insert for ISO turning DNMG150408 AH6235 is a PVD-coated carbide turning insert for external and internal turning, optimised for rostfreiem Stahl and interrupted cuts *DNMG150408 format, ISO 150408 rhombic insert *PVD-coated carbide grade AH6235 for stainless steel *55° cutting angle for versatile turning *Double-sided chipbreaker, cylindrical hole, 4.76 mm thick High toughness for demanding rostfreiem Stahl machining The AH6235 grade is a PVD-coated carbide formulated to deliver enhanced fracture resistance in the face of interrupted cuts and difficult rostfreiem Stahl applications. The coating improves wear resistance while the tougher substrate helps resist chipping at notches or starts and stops, so the insert sustains productive metal‑removal rates under challenging conditions. This combination results in more consistent tool life and fewer unexpected stoppages, supporting continuous production runs and predictable scheduling. Geometry that promotes stability and surface quality A rhombic DNMG geometry with a 55° cutting angle and a 0.8 mm corner radius provides a balance between strength and access to the workpiece. The moderate corner radius aids in edge durability while allowing fine surface finishes when required. The double-sided chipbreaker design improves chip control across a range of feeds, reducing the risk of built-up edge and enabling safer chip evacuation. These geometric features work together to deliver repeatable dimensional accuracy and improved surface integrity in both external and internal turning tasks. ISO compatibility and straightforward shop-floor integration As an ISO-standard indexable insert, the component fits a broad range of commercially available holders when matched by form, free angle, tolerance class, fastening method, size and thickness. The insert’s cylindrical hole simplifies clamping and replacement, and the 4.76 mm plate thickness offers robust support in the pocket. Using this grade and geometry reduces the need for frequent tool changes and contributes to lower tooling cost per part when compared to less specialised grades. For process planning, the insert is recommended where stability and controlled chip formation are priorities. For process support with Tungaloy turning inserts and to confirm holder compatibility, contact Metav Werkzeuge for application guidance and component matching at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6903382 Manufacturer SKU: TUN6903382 Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Plate size: 15 mm Corner radius: 0.8 mm Plate thickness: 4.76 mm Cutting angle: 55° Free angle: 0° Special features Rhombic plate form Cylindrical hole (with hole) Double-sided chipbreaker PVD-coated carbide, grade AH6235 ISO-standard turning insert Suitable for external and internal turning Optimised for rostfreiem Stahl and interrupted cuts FAQ What materials is this insert suited for? The DNMG150408 AH6235 Tungaloy turning insert is optimised for rostfreiem Stahl and performs well in interrupted cutting conditions and materials with a tendency to work-harden. How does the AH6235 grade improve process reliability? AH6235 uses a tougher substrate and a PVD coating to resist chipping and wear; this combination on the DNMG150408 format reduces unexpected edge failure and supports stable production. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions; compatibility depends on matching holder form, free angle, tolerance class, fastening and pocket dimensions. Which features aid chip control during turning? The double-sided chipbreaker and optimised geometry of the rhombic plate promote predictable chip formation and evacuation, improving surface finish and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8005 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH8005 grade and the double-sided chipbreaker for stable, high-temperature machining of hard alloys; the combination of wear-resistant substrate and optimised chip control supports longer tool life and consistent surface quality. Order the insert directly via Metav Werkzeuge or contact the consultants for advice on holder compatibility and application-specific selection. DNMG150408 AH8005 ISO rhombic turning insert — PVD-coated carbide, double-sided chipbreaker (Tungaloy) The DNMG150408 AH8005 is an ISO rhombic turning insert designed for stable external and internal turning of heat-resistant alloys and hard materials using standard ISO turning holders PVD-coated wear-resistant grade AH8005 Suitable for heat-resistant alloys and hard materials Double-sided chipbreaker for stable cutting ISO rhombic 55° with 0.8 mm corner radius Consistent performance for demanding turning operations The combination of a PVD-coated carbide substrate and the AH8005 grade provides improved wear resistance at elevated temperatures, making the insert well suited to machining heat-resistant alloys and other challenging materials. The PVD layer reduces flank and crater wear, which directly contributes to longer tool life and more consistent component quality. In practical terms, this means fewer changeovers and more predictable cycle times when working under stable cutting conditions with robust clamping. Designed for reliable clamping and simple system integration Compatibility with a turning holder depends on form, free angle and tolerance class as well as fixing method, size and thickness. The insert features an ISO rhombic geometry with a 55° approach angle, 4.76 mm thickness and a cylindrical hole for secure mounting. These measurable attributes support straightforward selection of a matching external holder or boring bar. Descriptions such as form and thickness are crucial: they ensure the insert seats correctly, transmits cutting forces safely and maintains repeatable positioning across tool changes. Optimised chip control and surface finish for efficient production A double-sided chipbreaker integrated into the topography improves fragmentation and evacuation of chips in a broad range of feeds and depths of cut. Together with the 0.8 mm corner radius, this leads to balanced edge strength and surface quality during both finishing and medium-turning operations. The controlled chip flow reduces the risk of built-up edge on the insert and minimises secondary finishing work, delivering an efficient balance between productivity and component integrity. For application-specific guidance or stock enquiries of the Tungaloy AH8005 grade, contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6928959 Manufacturer SKU: TUN6928959 SKU: 6928959-Tungaloy Manufacturer: Tungaloy Facts Inscribed circle: 15 mm Approach angle: 55° Corner radius: 0.8 mm Thickness: 4.76 mm Special features PVD-coated carbide AH8005 wear-resistant grade Double-sided chipbreaker Cylindrical hole for mounting ISO turning insert series Suitable for external and internal turning Designed for heat-resistant alloys and hard materials FAQ Which materials is the insert suitable for? The insert is specified for heat-resistant alloys and other hard materials; the AH8005 grade and PVD-coated carbide substrate provide the required wear resistance for these applications. What operations suit this insert? The geometry and chipbreaker are optimised for external and internal turning where stable clamping and repeatable cutting conditions are available. How does the chipbreaker help in production? The double-sided chipbreaker improves chip fragmentation and evacuation, reducing the risk of entanglement and supporting steady surface finish and tool life. How is the insert mounted in the holder? Mounting depends on matching form, free angle, tolerance class, fixing method, size and thickness; the insert’s cylindrical hole and ISO dimensions facilitate correct seating in compatible holders. What distinguishes the AH8005 grade? The AH8005 grade is a wear-resistant PVD-coated carbide designed to withstand higher cutting temperatures and to provide consistent performance in demanding materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8005 Wendeplatten - Tungaloy
Benefit from the combination of ISO‑standard geometry, a PVD‑coated AH8005 carbide for improved wear resistance and a 55° rhombic profile that supports secure turning operations; order directly via Metav Werkzeuge or request tailored advice from our consultants. DNMG150408 AH8005 Tungaloy – Indexable Turning Insert, PVD‑coated Carbide, 55° DNMG150408 AH8005 is an ISO‑standard indexable insert designed for turning operations in demanding materials. ISO 55° rhombic geometry PVD‑coated carbide AH8005 0.8 mm corner radius for strength Double-sided chipbreaker, cylindrical hole Exceptional wear resistance for high‑temperature alloys The combination of PVD‑coated surface and carbide substrate delivers elevated wear resistance, especially under the thermal and mechanical stress encountered when machining heat‑resistant alloys and other hard materials. The AH8005 grade is formulated for stable cutting conditions and provides a consistent cutting edge life, which reduces the frequency of index changes and supports uninterrupted production. By choosing a coated grade with proven toughness, predictable tool life and repeatable surface quality are more easily achieved, lowering overall machining cost per component. Stable geometry and secure clamping for repeatable results The rhombic 55° profile and a 0° clearance angle create a compact cutting geometry that is well suited to both external and internal turning operations where control and rigidity are priorities. The insert’s double‑sided chipbreaker allows multiple indexing positions and consistent chip formation when matched to a suitable holder. Compatibility with ISO holders is governed by form, free angle, tolerance class, fastening type, size and thickness; checking these parameters ensures correct seating and repeatable positioning in the toolholder, translating into predictable dimensional accuracy and surface finish. Practical machining guidance to maximise productivity With a 0.8 mm corner radius and a plate thickness of 4.76 mm, this rhombic insert balances edge strength and surface finish: the larger radius increases edge robustness for interrupted cuts, while the geometry still permits fine finishing cuts when machine and setup are stable. The cylindrical hole and standardised dimensions facilitate secure clamping in dedicated holders; selecting an appropriate chipbreaker and stable clamping arrangement will improve chip control and extend usable edge life. For outer and inner turning, choose cutting parameters in line with the workpiece material and the insert’s wear‑resistant properties to achieve efficient, repeatable machining. For high‑temperature alloy turning with extended edge life, contact Metav Werkzeuge for stock information and personalised tooling recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6775764 SKU: 6775764-Tungaloy Manufacturer SKU: TUN6775764 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: DNMG150408 AH8005 Shape: Rhombic Plate thickness: 4.76 mm Data Angle: 55° Corner radius: 0.8 mm Plate size: 15 mm Clearance angle: 0° Hole style: Cylindrical hole Special features PVD‑coated carbide (AH8005) Double‑sided chipbreaker Suitable for heat‑resistant alloys and hard materials ISO‑standard indexable turning insert Application: Turning FAQ Is this insert suitable for machining heat‑resistant alloys? The DNMG150408 AH8005 insert from Tungaloy is specifically formulated for machining heat‑resistant alloys and other hard materials, offering high wear resistance under thermal stress. What materials is this grade intended for? The AH8005 grade is intended for heat‑resistant alloys and hard workpiece materials where stable cutting conditions and wear resistance are required. How can compatibility with a holder be verified? Compatibility depends on the holder’s form, free angle, tolerance class, fastening method, size and thickness; matching these parameters to the ISO‑standard insert ensures correct seating and secure clamping. How does the chip control perform with this insert? The double‑sided chipbreaker provides consistent chip formation in stable setups, improving evacuation and enabling reliable machining when combined with a suitable cutting strategy. What does the 0.8 mm corner radius mean for my process? A 0.8 mm corner radius increases edge strength and resistance to chipping, which is beneficial for interrupted cuts and tougher materials while still permitting acceptable surface finishes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150408 AH8005 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH8005 grade and the 0.8 mm corner radius for reliable performance on heat-resistant alloys and hard materials; the combination of robust carbide substrate and a double-sided, ISO‑standard form reduces tool changes and supports steady production. Order directly via Metav Werkzeuge or consult our advisers for chipbreaker and holder matching. DNMG 150408 AH8005 — DNMG turning insert for turning by Tungaloy, PVD-coated, 0.8 mm radius The DNMG150408 AH8005 Tungaloy insert is a PVD‑coated cemented carbide indexable insert engineered for external and internal turning of heat‑resistant alloys and hard materials, combining wear resistance with stable cutting characteristics. PVD-coated carbide grade AH8005 ISO DNMG 150408 rhombic insert 55° approach angle, 0° clearance Double-sided with cylindrical hole Reliable wear resistance for heavy‑duty turning The PVD-coated AH8005 grade pairs a wear‑resistant surface treatment with a tough cemented carbide substrate to extend edge life under elevated cutting temperatures. The coating reduces adhesive and abrasive wear mechanisms common when machining heat‑resistant alloys, so material removal rates can be maintained for longer periods with fewer interruptions. This results in a more predictable tool life and helps to keep cycle times consistent, which is particularly valuable for batch production and jobs where reproducible results are required. Straightforward integration with ISO compatibility and secure clamping Designed to the ISO DNMG 150408 form, the insert is compatible with a wide range of indexable holders when the form, free angle, tolerance class, fastening method, size and thickness are matched. The rhombic geometry and central cylindrical hole facilitate reliable locating and clamping in standard toolholders, while the 0° clearance and 55° approach angle deliver a balance between edge strength and access for finishing. Key dimensions such as 0.8 mm corner radius, 4.76 mm plate thickness and 15 mm inscribed circle ensure predictable fitment and predictable cutting behaviour across commonly used turning systems. Efficient edge economy and stable surface finish The double-sided construction provides multiple indexable cutting edges, improving cost per edge and simplifying inventory management. The AH8005 grade is formulated for stable cutting on tougher alloys, supporting consistent surface finish and reduced burr formation when the correct chipbreaker is selected for the workpiece and machining stability. In practice, this translates into fewer tool changes, lower downtime and steady part quality — an advantage for production environments prioritising throughput without sacrificing reproducibility. For dependable machining of heat‑resistant alloys and hard materials, request the Tungaloy DNMG 150408 AH8005 insert through Metav Werkzeuge and our technical advisers will recommend the optimal chipbreaker and holder configuration — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6741653 Manufacturer SKU: TUN6741653 SKU: 6741653-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: DNMG150408 AH8005 Tungaloy-Wendeplatte Brand: Tungaloy Material: Cemented carbide Coating / Grade: AH8005 (PVD) Application: Turning Facts ISO code: 150408 Inscribed circle: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Lead angle: 55° Clearance angle: 0° Special features Rhombic plate form Double-sided chipbreaker Cylindrical central hole ISO-standard indexable insert Suited to heat-resistant alloys and hard materials Compatible with standard DNMG turning holders FAQ What materials is this insert suitable for? The DNMG150408 AH8005 Tungaloy insert is formulated for heat‑resistant alloys and hard materials, where the PVD coating and carbide substrate provide improved wear resistance and edge life. How does the insert locate in a holder? Location is via the cylindrical central hole and rhombic seating; compatibility requires matching holder form, clearance angle, tolerance and plate thickness to the ISO DNMG 150408 standard. What advantages does the AH8005 grade offer? AH8005 (PVD) offers a wear‑resistant surface and stable cutting performance for demanding turning operations, extending edge life and enabling steady productivity with fewer interruptions. Is the corner radius suitable for finishing passes? The 0.8 mm corner radius gives a compromise between edge strength and finish quality, making the insert appropriate for a mix of light finishing and medium cutting tasks when combined with the correct feed and chipbreaker. How many times can the insert be indexed? As a double‑sided indexable insert, the DNMG150408 AH8005 can be rotated to present fresh cutting edges in line with standard indexable insert practice; actual edge count and rotation intervals depend on machining conditions and stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8005 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH8005 grade and the 0.8 mm corner radius to extend tool life and maintain stable cycle times in demanding turning operations; order the inserts directly via Metav Werkzeuge or contact their consultants for application support. DNMG150408 AH8005 DNMG turning insert — PVD-coated cemented carbide, 55° rhombic A DNMG150408 AH8005 Tungaloy insert engineered for stable external and internal turning of heat-resistant alloys and hard materials. PVD-coated carbide grade AH8005 0.8 mm corner radius for finishing Double-sided, cylindrical hole design ISO DNMG 55° rhombic insert Longer tool life and consistent process economy The PVD-coated cemented carbide composition of this grade, AH8005, delivers pronounced wear resistance under elevated temperatures. That technical combination reduces flank and crater wear during higher cutting temperatures, which translates into fewer index changes and more consistent production cycles. For contract manufacturers and job shops aiming to lower unit costs, the result is measurable: uptime increases and tool consumption becomes more predictable. Secure geometry for repeatable clamping and chip control The 55° rhombic form with a 0° clearance and 0.8 mm radius ensures reliable seating and consistent cutting line engagement. The double-sided configuration with a cylindrical hole improves clamping stability while offering economical indexability. The defined geometry supports accurate regrip and repeatable part tolerances, which benefits setups where reproducibility and surface integrity are critical. Optimised for heat-resistant alloys and hardened materials Designed specifically for demanding materials, the AH8005 grade performs well when machining heat‑resistant alloys and harder alloys where thermal stability and edge tenacity are required. The PVD layer enhances the effective hot hardness of the substrate, so the insert maintains edge stability during interrupted cuts or high-temperature contact. This makes the product a pragmatic choice for aerospace, energy and high-performance component production. System compatibility and straightforward integration As part of the ISO DNMG family, the insert fits common holders when the form, clearance, tolerance class, fixing method, size and thickness match. Typical system setup comprises the indexable insert, a matching external holder or boring bar, and a backing shim or clamp set with replacement screws. The standardised dimensions and the rhombic form simplify inventory management and reduce the variety of holders required for mixed-production environments. Select Tungaloy AH8005 inserts for dependable, economic turning — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical advice and ordering support Technical data Article number: 6741661 Manufacturer SKU: TUN6741661 SKU: 6741661-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core dimensions Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 15 mm Included angle: 55° Clearance angle: 0° ISO code: 150408 Features / Applications Material: cemented carbide Coating/grade: AH8005 (PVD) Double-sided with cylindrical hole Rhombic insert form (DNMG) Application: Turning (external and internal) Chipbreaker: double-sided FAQ What materials is this insert best suited for? The DNMG150408 AH8005 Tungaloy insert is optimised for heat-resistant alloys and harder materials where AH8005 provides enhanced wear resistance. Is the insert suitable for both external and internal turning? Yes, the insert is intended for external and internal turning operations as part of the ISO DNMG series and is compatible with appropriate holders. How does the PVD coating benefit cutting performance? The PVD layer on the AH8005 grade increases hot hardness and reduces adhesion and wear, improving performance in higher-temperature cutting scenarios. What advantages does the cylindrical hole provide? The cylindrical hole design enhances clamping stability and simplifies secure fastening in the seat, contributing to repeatable cutting geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, a 0.8 mm corner radius and ISO compatibility for reliable external and internal turning of heat‑resistant alloys; order directly via Metav Werkzeuge or request tailored advice from our consultants. DNMG150408 AH8015 indexable turning insert — PVD‑coated carbide, 55° rhombic, Tungaloy A DNMG150408 AH8015 indexable turning insert engineered for ISO‑standard external and internal turning of heat‑resistant alloys, offering balanced wear resistance and edge stability. ISO rhombic DNMG shape, 55° cutting angle PVD-coated carbide AH8015 for heat-resistant alloys Double-sided chipbreaker, cylindrical hole for secure fit 0° relief and 0.8 mm corner radius for robust edge Longer tool life and consistent wear behaviour for demanding alloys The PVD‑coating applied to the AH8015 grade provides a controlled balance between wear resistance and cutting-edge stability, which translates into extended indexable insert life and fewer interruptions for tool changes. This makes the insert especially suited to machining heat‑resistant alloys where thermal loads are significant. The coating reduces adhesion and built‑up edge, so batch runs remain consistent and scrap rates fall, supporting predictable production planning and cost‑efficient throughput. Simple compatibility and secure clamping reduce setup uncertainty Supplied in the ISO rhombic DNMG format with a cylindrical hole, this insert is compatible with standard external holders when form, clearance angle, tolerance class, fastening and thickness match. The double‑sided chipbreaker design offers multiple indexing options, improving value per insert, while the 0° relief angle assists in achieving repeatable seating and orientation. Clear identification of form and dimensions streamlines holder selection and minimises setup time on the shop floor. Improved chip control and surface integrity for reliable finishing A 0.8 mm corner radius combined with the rhombic 55° geometry supports robust edge strength without sacrificing surface finish. The integrated chipbreaker is optimised for general turning; selecting the appropriate chipbreaker and grade for the workpiece and machining conditions enhances chip control and helps maintain an even surface quality. For internal and external turning, this design contributes to lower vibration and stable cutting forces, which aids consistent part accuracy and finish. For application advice specific to the PVD‑coated AH8015 grade or to obtain a recommendation tailored to a machining task, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants are available to assist with holder compatibility and grade selection Technical data Article number: 6928961 SKU: 6928961-Tungaloy Manufacturer SKU: TUN6928961 Brand: Tungaloy Material: Carbide Model series: ISO indexable turning inserts Numbers / Core technical data Corner radius: 0.8 mm Thickness: 4.76 mm Size: 15 mm Cutting angle: 55° Relief angle: 0° Manufacturer article number: 6928961 Design / Special features PVD‑coated carbide AH8015 Double‑sided chipbreaker Rhombic insert shape (DNMG) Cylindrical hole for fastening ISO‑standard insert for turning Intended application: turning of heat‑resistant alloys FAQ What materials is this insert suited for? The AH8015 grade is a PVD‑coated carbide developed as a first choice for machining heat‑resistant alloys; it provides a balance between wear resistance and edge stability for demanding materials. Is the insert compatible with standard DNMG holders? Compatibility depends on holder form, clearance, tolerance class, fastening and thickness; the DNMG150408 geometry and cylindrical hole ensure compatibility with ISO‑compliant holders when those parameters match. How many cutting edges are available per insert? The double‑sided chipbreaker design offers multiple usable edges through indexing; this increases the number of operations achievable before replacement. What benefits does the 0.8 mm corner radius bring? A 0.8 mm radius enhances edge strength and process reliability, supporting improved surface finish and reduced risk of chipping in interrupted cuts. Can this insert be used for internal turning? Yes — the rhombic DNMG form and the balanced AH8015 grade make the insert suitable for both external and internal turning applications when correct holder geometry is used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
Benefit from a durable, PVD-coated carbide grade that balances wear resistance and edge stability, and a proven 55° rhombic geometry that integrates into ISO tool systems for reliable turning of heat‑resistant alloys — order directly via Metav Werkzeuge or consult the technical team for holder compatibility. DNMG 150408 AH8015 Turning Insert by Tungaloy — ISO rhombic, 55° A DNMG150408 AH8015 turning insert designed for general external and internal turning, optimised for heat‑resistant alloys and balanced production performance PVD-coated carbide grade AH8015 Rhombic geometry, 55° cutting angle 0.8 mm corner radius for versatile cuts Double-sided chipbreaker, cylindrical hole Consistent performance for demanding turning tasks The PVD‑coated carbide formulation AH8015 delivers a measured balance between wear resistance and edge stability, which supports stable production on demanding materials. As an ISO rhombic insert with a 55° cutting angle and a 0.8 mm corner radius, it provides predictable chip formation and a dependable cutting edge for both external and internal turning. The combination of material and geometry helps to maintain surface finish quality and extend intervals between insert changes, contributing to overall process reliability. Geometry and chip control that improve productivity The rhombic plate form and double‑sided chipbreaker are engineered to promote controlled chip breaking and evacuation during interrupted or continuous cuts. A cylindrical central hole secures the insert in common clamping systems while allowing quick index changes, enabling shorter tool change times and reduced downtime. These design features translate to smoother machining cycles and more consistent component quality, especially when machining heat‑resistant alloys where chip control and thermal behaviour are critical. Seamless integration into ISO tool systems Compatibility with holders depends on form, clearance angle, tolerance class, fixation, size and thickness; this insert conforms to ISO standards for straightforward selection and interchangeability. The ISO‑design series approach means a matching outer holder or boring bar, plus the correct shim/clamp set and securing screws, will complete a robust tool assembly. Clear specification of plate thickness (4.76 mm) and plate size (15 mm) simplifies procurement and tool setting in established machining centres. Material focus: optimised for heat‑resistant alloys AH8015 is specified as a first choice for general machining of heat‑resistant alloys due to its PVD coating and carbide substrate, offering a compromise between longevity and edge strength. This grade is appropriate where thermal stability and consistent cutting performance are required rather than specialised high‑speed or ultra‑hard applications. When paired with an appropriate holder and cutting parameters, the insert supports repeatable results and efficient material removal in serial production. For reliable machining of heat‑resistant alloys, request a quote for the Tungaloy DNMG150408 AH8015 turning insert from Metav Werkzeuge — our specialists will advise on holder compatibility and optimal cutting data. Technical data Article number: 6947261 Manufacturer SKU: TUN6947261 Brand SKU: 6947261-Tungaloy Model series: ISO turning indexable inserts Numbers / core technical data Plate designation: DNMG150408 Grade / coating: AH8015 (PVD-coated carbide) Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Hole style: cylindrical hole Special features / applications Rhombic plate form (55°) Double-sided chipbreaker ISO-compatible insert for turning Suitable for external and internal turning Recommended for heat-resistant alloys System: insert + suitable outer holder/boring bar + shim/clamp + screws FAQ Which materials are best machined with this insert? The DNMG150408 AH8015 insert is optimised for machining heat‑resistant alloys; its PVD‑coated carbide composition balances wear resistance and edge stability for these materials. Is the DNMG150408 compatible with standard ISO holders? Yes, the insert follows ISO geometry standards; compatibility depends on holder form, clearance angle, tolerance class, fixation, size and thickness — the insert integrates with common outer holders and boring bars. How does the chipbreaker design affect machining? The double‑sided chipbreaker promotes controlled chip formation and evacuation, improving stability and surface finish during both continuous and interrupted turning operations with the AH8015 grade. What are the key dimensions to check before ordering? Check the plate size (15 mm), thickness (4.76 mm), corner radius (0.8 mm) and hole style (cylindrical) to ensure proper fit with the chosen clamping system and holder. Can the insert be indexed to use both sides? Yes, the insert is double‑sided, allowing indexing to a fresh cutting edge and extending the service life per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of PVD-coated carbide durability and a precise 0.8 mm corner radius for reliable turning performance; order the insert directly via Metav Werkzeuge or consult our technical team for compatibility guidance. DNMG 150408 AH8015 ISO turning indexable insert by Tungaloy DNMG 150408 AH8015 is an ISO-format turning insert designed for general turning of heat‑resistant alloys and of both external and internal profiles ISO DNMG 150408 form, holder compatibility PVD-coated carbide AH8015 for heat alloys Double-sided chipbreaker for stable chips 0.8 mm corner radius for consistent profiles Predictable ISO fit to reduce changeover time The ISO designation and the DNMG 150408 form ensure predictable mechanical and geometric fitting in ISO-compatible holders. Compatibility depends on the insert’s shape, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters with the clamping set and toolholder reduces setup time and avoids unexpected fit issues. For production environments, the standardised interface means fewer adapter components and faster tool changes, supporting uninterrupted process flow and reproducible results. Coating and substrate engineered for heat‑resistant alloys The PVD process used on the PVD-coated carbide substrate known as AH8015 produces a hard, uniform coating that balances wear resistance with edge stability. This makes the grade a first choice for machining heat‑resistant alloys where thermal and abrasive loads are elevated. The combination of surface hardness and a tough carbide core extends tool life and helps maintain surface quality over longer cycles, which in turn lowers tooling costs per part and supports predictable machining windows. Geometry and chip control for efficient turning The rhombic insert geometry with a 55° approach angle delivers an advantageous mix of cutting force distribution and accessibility in confined turning operations. The 0.8 mm corner radius increases edge strength for repeatable profiles, while the double‑sided chipbreaker aids consistent chip formation and evacuation under a wide range of conditions. A cylindrical hole secures the insert in the clamp and the 4.76 mm thickness contributes to rigidity during interrupted cuts. Together these features support stable cutting, reliable surface finish and fewer interruptions for indexing or regrinding. For robust, predictable turning of heat‑resistant alloys request the Tungaloy DNMG 150408 AH8015 insert from Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 to confirm holder compatibility and optimise cutting data Technical Data Article number: 6741662 Manufacturer SKU: TUN6741662 Metav SKU: 6741662-Tungaloy Model series: ISO turning indexable inserts Designation: DNMG150408 AH8015 Facts Corner radius: 0.8 mm Insert size: 15 mm Plate thickness: 4.76 mm Cutting angle: 55° Clearance angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating/sort: AH8015 (PVD-coated) Chipbreaker: double-sided Plate shape: rhombic Application: turning (external and internal) Compatible system: ISO insert, requires matching holder and clamp set FAQ Which materials is this insert designed for? The AH8015 grade is intended as a first choice for machining heat‑resistant alloys; the PVD-coated carbide substrate favours applications where elevated cutting temperatures and abrasive wear occur. Is the insert indexable and reversible? Yes, the insert is double‑sided and can be indexed to present a fresh cutting edge, extending life per insert and reducing tooling costs. How is holder compatibility determined? Holder compatibility depends on the ISO form, clearance angle, tolerance class, fastening type, size and thickness; checking these parameters against the toolholder specification ensures correct clamping and performance. What corner radius and geometry does the insert have? This insert features a 0.8 mm corner radius and a rhombic 55° geometry, chosen to balance edge strength and accessibility for external and internal turning. What coating does the insert use and what advantage does it bring? The insert uses a PVD-coated AH8015 grade, providing improved wear resistance and edge stability under thermal and abrasive loads compared with uncoated substrates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide performance and ISO compatibility for consistent turning results; the rhombic geometry with a 55° included angle and 0.8 mm corner radius ensures stable edge life and predictable surface finish. Contact Metav Werkzeuge for component selection or technical advice and order the insert directly through their sales team. DNMG 150408 AH8015 — Turning insert by Tungaloy, PVD-coated carbide, 55° geometry DNMG150408 AH8015 is an ISO-standard rhombic turning insert for general turning applications, optimised for heat-resistant alloys and balanced tool life. ISO rhombic DNMG150408 insert PVD-coated carbide grade AH8015 55° included angle for versatile turning Double-sided chipbreaker, indexable design Cylindrical hole for secure clamping Reliable cutting performance for production turning The insert is designed for stable, reproducible machining in series and single-part production. Manufactured from PVD-coated carbide, the grade delivers an equilibrium between wear resistance and edge stability, which translates into longer intervals between indexings and fewer tool changes. The rhombic form and 55° included angle support a wide range of cutting directions, while the double-sided chipbreaker helps control chips under varying cutting conditions, improving process security and surface quality. Straightforward integration with ISO tooling systems As an ISO-format rhombic insert, compatibility with clamping systems is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The DNMG150408 geometry and the cylindrical hole allow secure seating in standard external holders or boring bars, enabling fast indexation and repeatable positioning. This reduces set-up time on the shop floor and simplifies tool inventory management since the insert fits commonly used carrier types. Suited materials and recommended applications This grade is the first choice for general machining of heat‑resistant alloys, providing consistent results when turning stainless steels and similar alloys where a compromise between wear life and cutting-edge robustness is required. The combination of the 0.8 mm corner radius and the selected chipbreaker produces a reliable surface finish during light to moderate depths of cut. For heavy interrupted cuts or very abrasive materials, selecting a specific edge preparation or a different grade may be advisable to maximise tool life. For tailored recommendations on using Tungaloy turning inserts or to request stock and delivery information from Metav Werkzeuge, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — the sales team will advise on the optimal insert variant and compatible holders for the intended turning tasks. Technical data Article number: 6947209 Manufacturer SKU: TUN6947209 Model series: ISO-Drehwendeschneidplatten Facts Insert designation: DNMG150408 Grade / coating: AH8015 (PVD-coated carbide) Included angle: 55° Clearance angle: 0° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 15 mm Special features Rhombic plate form Double-sided chipbreaker Cylindrical hole (with hole) ISO-standard turn insert for external and internal turning Suited for machining heat-resistant alloys FAQ What materials is this insert suitable for? The DNMG150408 AH8015 insert is intended primarily for machining heat-resistant alloys and offers a balanced combination of wear resistance and edge stability for such materials. Can this insert be used in standard ISO holders? Yes, the DNMG150408 geometry is ISO-standard; compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness, allowing integration with common external holders and boring bars. What benefit does the AH8015 grade provide in everyday production? AH8015 is a PVD-coated carbide grade that balances wear resistance with cutting-edge robustness, extending in-service intervals and delivering consistent surface quality in general turning operations. How does the double-sided chipbreaker affect machining? The double-sided chipbreaker on the insert helps control chip formation across a range of cutting conditions, improving process reliability and contributing to safer, cleaner machining cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced PVD-coated carbide and 0.8 mm corner radius for consistent tool life and process stability; order the DNMG150408 AH8015 turning insert directly via Metav Werkzeuge or contact the technical team for application advice. DNMG 150408 AH8015 Turning Insert for Turning by Tungaloy DNMG150408 AH8015 is a rhombic ISO turning insert designed for general turning of heat-resistant alloys, combining a stable cutting edge with wear-resistant PVD-coated carbide. PVD-coated carbide for heat-resistant alloys 0.8 mm corner radius for stable cutting Double-sided chipbreaker for reliable performance Rhombic 55° geometry with cylindrical hole Consistent metalcutting performance and tool life The AH8015 grade is a PVD-coated carbide designed as a first choice for the general machining of heat-resistant alloys. The coating increases wear resistance while the substrate preserves edge stability, which together reduce regrinds and tool changes. The rhombic geometry with a 55° included angle and a 0.8 mm corner radius delivers predictable cutting behaviour, supporting repeatable surface finish and stable chip formation even in interrupted cuts. Precise compatibility and clamping for industrial setups Compatibility with toolholders is governed by insert form, relief angle, tolerance class, fastening style, size and thickness. The DNMG150408 format fits ISO-standard external holders and boring bars when the holder matches the insert’s dimensions and clamping concept. The insert's cylindrical hole enables secure screw clamping and simple indexing; this supports rapid tool changes and lowers machine downtime in production environments. Productivity through chip control and application flexibility The double-sided chipbreaker geometry balances chip control and cutting forces, aiding heat dissipation and preventing long, stringy chips. For external and internal turning operations, selecting the appropriate chipbreaker and the AH8015 grade ensures efficient material removal and extended tool life. The insert’s 4.76 mm thickness and rhombic shape provide rigidity for medium to heavy cuts where stability is essential. System-level benefits and process advice As part of a complete system — ISO insert, matching external holder or boring bar, shim/clamping set and replacement screws — this insert supports streamlined inventory and quick set-ups. Metav Werkzeuge recommends matching holder runout tolerance and clamping method to the insert dimensions to maintain consistent cutting conditions and minimise vibrations that could shorten tool life. Contact Metav Werkzeuge for tailored application guidance on the Tungaloy DNMG150408 AH8015 turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and cutting data Technical data Article number: 6793733 Manufacturer SKU: TUN6793733 SKU: 6793733-Tungaloy Brand: Tungaloy Model series: ISO turning insert series Core data Corner radius: 0.8 mm Insert size: 15 mm Thickness: 4.76 mm Included angle: 55° Relief angle: 0° Manufacturer article number: 6793733 Design & features Shape: rhombic Hole: with cylindrical hole Coating: PVD Material: carbide Chipbreaker: double-sided Application: turning (external and internal) System composition: ISO insert, compatible external holder or boring bar, shim/clamping set, replacement screws Compatibility factors: form, relief angle, tolerance class, fastening, size, thickness FAQ What materials is this insert best suited for? The AH8015 grade in the DNMG150408 insert is optimised for heat-resistant alloys and delivers a balanced combination of wear resistance and edge stability for such materials. Is the insert indexable and reversible? Yes, the DNMG150408 is a double-sided indexable insert; the rhombic shape allows rotation to a fresh cutting edge, extending usable tool life. Which holder types are compatible with this geometry? Compatibility requires an ISO-compatible external holder or boring bar that matches the DNMG150408 form, relief angle, tolerance class, fastening method, size and thickness. How does the cylindrical hole affect clamping? The cylindrical hole enables secure screw clamping and straightforward replacement of screws, supporting consistent seating and repeatable clamping force. For which turning operations is this insert recommended? Use the insert for both external and internal turning; select the chipbreaker and AH8015 grade according to the workpiece material and setup stability for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide grade AH8015 combined with a 55° rhombic geometry and a double-sided chipbreaker to secure consistent chip formation and long edge life in alloy turning operations. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. DNMG150408 AH8015 indexable turning insert by Tungaloy — PVD-coated carbide, 55° rhombic The DNMG150408 AH8015 Tungaloy indexable insert is an ISO-format rhombic turning insert designed for general turning and for machining heat-resistant alloys where a balance of wear resistance and edge stability is required. PVD-coated carbide for long tool life Double-sided chipbreaker for consistent chips 55° rhombic geometry for versatile turning Cylindrical hole and ISO compatibility Stable chip control for reproducible cycles The PVD layer on the carbide substrate ensures improved wear resistance while preserving the cutting-edge strength required for intermittent or continuous cuts. With the AH8015 grade, the combination of coating and substrate is optimised for machining heat-resistant alloys, giving a predictable tool life and reduced flank wear. The double-sided chipbreaker promotes regular chip segmentation, lowering the risk of built-up edge and helping to maintain surface finish standards during external and internal turning. Simple integration into ISO holder systems Being part of an ISO-indexable insert series, compatibility is governed by insert form, clearance angle, tolerance class, fastening method, nominal size and thickness. The 55° rhombic geometry and cylindrical hole allow reliable seating and clamping in standard holders; the 4.76 mm thickness and 0° clearance are suitable for many external and internal turning setups. This clear definition of geometry and tolerances supports quick changeover and repeatable positioning when exchanging corners, contributing to process stability. Productivity gains through edge stability and longevity The insert’s design focuses on a pragmatic balance between edge stability and abrasive resistance, which reduces unplanned tool changes and machine downtime. For shops processing alloyed or heat-resistant materials, the grade's behaviour translates into fewer rejects and consistent surface quality. Selecting the appropriate chipbreaker and cutting data for the material and machine rigidity will maximise the productivity benefits and improve overall cost-efficiency in series production. For tailored application advice and fast supply of DNMG150408 AH8015 from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947119 SKU: 6947119-Tungaloy Manufacturer SKU: TUN6947119 Model series: ISO-Drehwendeschneidplatten Label: DNMG150408 AH8015 Tungaloy-Wendeplatte Manufacturer: Tungaloy Key figures Plate size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Cutting angle: 55° Hole style: cylindrical Design & special features Material: carbide (Hartmetall) Coating: PVD Grade: AH8015 Plate shape: rhombic Chipbreaker: double-sided Mounting: with hole, cylindrical hole Application: turning; suited for heat-resistant alloys FAQ Which materials is this insert suitable for? The DNMG150408 AH8015 insert and its AH8015 grade are intended primarily for machining heat-resistant alloys and general alloyed steels where a balance of wear resistance and edge stability is required. How is holder compatibility determined? Compatibility is defined by the insert form, clearance angle, tolerance class, fastening, nominal size and thickness; the DNMG150408 conforms to ISO-indexable insert standards for reliable clamping and seating. What cutting geometry does the insert provide? The insert features a 55° rhombic geometry with a 0° clearance angle and a 0.8 mm corner radius, suitable for versatile external and internal turning tasks. What advantages does the PVD coating deliver? The PVD-coated carbide substrate of the DNMG150408 increases surface hardness and oxidation resistance, improving wear resistance while maintaining cutting-edge stability for longer service life. Is the insert suitable for both external and internal turning? Yes, the insert is designed for both external and internal turning; selecting the correct chipbreaker and cutting data ensures optimal chip control and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8015 for wear resistance, a 0.8 mm nose radius for versatile turning and the ISO‑standard DNMG geometry for simple toolholder compatibility; order directly via Metav Werkzeuge or consult our technical team for application support. DNMG150408 AH8015 ISO turning insert — PVD‑coated carbide, 55° rhombic, Tungaloy The DNMG150408 AH8015 is an ISO rhombic indexable insert designed for external and internal turning of heat‑resistant alloys and general turning tasks PVD‑coated carbide AH8015 grade ISO DNMG 150408 rhombic geometry 0.8 mm nose radius for versatile turning Double‑sided insert with cylindrical hole Consistent cutting performance for heat‑resistant alloys The insert delivers a balanced combination of wear resistance and edge stability thanks to the AH8015 grade and PVD‑coating, making it suitable for demanding materials where temperature resistance is required. This balance reduces unexpected edge chipping and contributes to longer tool life, which in turn improves process stability and reduces downtime. The rhombic 55° geometry supports a controlled approach angle, while the 0.8 mm nose radius provides a good compromise between strength and surface finish. Seamless integration into ISO tool systems Designed as part of the ISO turning insert family, this indexable insert mates with standard external holders and boring bars; compatibility depends on form, clearance, tolerance class, clamping method, size and thickness. The insert’s cylindrical hole and standard dimensions simplify replacement and spare‑parts logistics. Choosing the correct chipbreaker and grade for the workpiece and machine rigidity ensures predictable cutting forces and repeatable results on the shop floor. Practical benefits for workshop productivity The double‑sided construction and standardised form reduce inventory cost per cutting edge and allow quick turnarounds during tool changes. The combination of PVD‑coated carbide, a robust chip control geometry, and the rhombic form supports both external and internal turning operations, delivering consistent surface quality and reducing rework. Clear technical data and ISO conformity help planning for tool life and cutting data, enabling efficient, measurable production cycles. For tailored advice on applying this Tungaloy DNMG150408 AH8015 insert and to check current stock or delivery options, contact Metav Werkzeuge for expert support and order handling. Technical Data Article number: 6775765 Manufacturer article number: 6775765 Manufacturer SKU: TUN6775765 Vendor SKU: 6775765-Tungaloy ISO designation: DNMG150408 Dimensions & measurable data Plate size: 15 mm Thickness: 4.76 mm Nose radius: 0.8 mm Lead/angle: 55° Clearance angle: 0° Design & features Material: Carbide (PVD‑coated) Grade: AH8015 Chipbreaker: Double‑sided Hole: Cylindrical hole Form: Rhombic Application: Turning (external and internal) System: ISO turning insert series FAQ What materials is this insert suited for? The AH8015 PVD‑coated carbide grade is intended primarily for heat‑resistant alloys; the DNMG150408 insert from Tungaloy also performs well in general turning when matched with a suitable chipbreaker. How is the insert mounted in the holder? The DNMG150408 indexable insert fits ISO‑standard holders and boring bars; compatibility is determined by the insert form, clearance angle, tolerance class, clamping method, size and thickness. What advantages does the PVD coating provide? The PVD coating on the AH8015 grade increases wear resistance and improves edge life under elevated temperatures, making the insert a reliable choice for tougher alloys and longer production runs. How many cutting edges are available per insert? This rhombic insert is double‑sided, offering multiple usable cutting edges before replacement, which helps reduce tooling costs per edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
Combining PVD-coated carbide wear resistance with a 0° clearance geometry and a 55° rhombic form delivers stable, general-purpose turning performance for heat‑resistant alloys; order the DNMG150408 AH8015 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408 AH8015 turning insert — PVD-coated carbide, 0° clearance — Tungaloy The DNMG150408 AH8015 is an ISO‑standard rhombic turning insert designed for external and internal turning of heat‑resistant alloys, offering a balanced combination of wear resistance and edge stability for productive machining. PVD-coated carbide grade AH8015 Rhombic 55° geometry for secure seating 0° clearance angle for stable cutting Double-sided chipbreaker, cylindrical hole Consistent performance for general turning of heat-resistant alloys The PVD‑coated AH8015 carbide grade is formulated as a first choice for general machining of heat‑resistant alloys, providing an effective balance between wear resistance and edge stability. This balance reduces flank wear and maintains a consistent cutting edge under thermal loads, which translates into predictable tool life and reliable surface finish. The rhombic geometry combined with the PVD coating supports repeatable material removal rates and lower scrap rates in batch production, making the insert well suited to routine and mixed‑material turning tasks. Geometry that improves stability and process reliability A 55° rhombic shape with a 0.8 mm corner radius and 0° clearance gives mechanical rigidity at the cutting zone and promotes controlled chip formation. The double-sided chipbreaker design and the cylindrical centre hole ensure secure mounting in ISO‑compatible holders; compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness. For workshops less familiar with insert geometry: a smaller corner radius reduces cutting forces for finish passes, while the rhombic angle allows convenient indexing and economical use of each cutting edge, enhancing overall process stability. Practical integration and application advice for workshop use The insert is delivered in an ISO specification intended to be used with a matching external holder, screw/clamping set and, where required, shim or support. It is suitable for both external and internal turning operations when the correct chipbreaker and grade are selected for the workpiece and machining conditions. For best results, pair the insert with a holder that matches the form and tolerance class, ensure secure clamping with the prescribed screw torque, and choose cutting parameters that correspond to the alloy’s machinability and the machine tool’s stiffness. The result is reduced downtime, improved surface quality and repeatable component tolerances. For Tungaloy precision and balanced wear performance, contact Metav Werkzeuge for expert ordering and technical advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 6793729 Manufacturer SKU: TUN6793729 Label / SKU: 6793729-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core data Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Main angle: 55° Clearance angle: 0° Design & special features PVD-coated carbide grade AH8015 Rhombic plate form Cylindrical hole for clamping Double-sided chipbreaker Intended application: turning Compatibility: ISO holders (form, tolerance, clamping dependent) Suitable for heat-resistant alloys FAQ What materials is this insert suitable for? The DNMG150408 AH8015 Tungaloy turning insert is intended primarily for heat‑resistant alloys and general‑purpose turning where a balance of wear resistance and edge stability is required. Which holders and clamping systems fit this insert? Compatibility is determined by ISO holder form, relief angle, tolerance class, clamping method, size and thickness; the rhombic form and cylindrical hole of the DNMG150408 AH8015 are designed for standard ISO external holders. How should the chipbreaker be selected for a given job? Select the chipbreaker according to workpiece material, type of cut and machine stability; the DNMG150408 AH8015 features a double‑sided chipbreaker to accommodate a range of chip‑control needs. Can the insert be used for internal turning as well as external turning? Yes, the geometry and grade of this insert make it suitable for both external and internal turning operations when used with the appropriate holder and cutting parameters. What are the main advantages of the AH8015 grade? The AH8015 PVD‑coated carbide offers a compromise between wear resistance and cutting edge stability, supporting longer tool life, consistent surface quality and dependable performance in demanding alloy machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, PVD‑coated carbide performance and a compact rhombic form for dependable turning operations; order directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG150408 AH8015 DNMG ISO turning insert for turning — Tungaloy The DNMG150408 AH8015 is an ISO‑normed rhombic turning insert designed for external and internal turning, optimised for heat‑resistant alloys and general turning tasks. ISO‑compliant rhombic insert, 55° approach PVD‑coated carbide for heat‑resistant alloys Double‑sided geometry with 0.8 mm nose radius Cylindrical central hole for secure clamping Reliable system compatibility and predictable machining results The ISO series construction ensures straightforward integration into existing tool systems: ISO conformity, the rhombic form and defined dimensions allow quick identification of the correct holder and clamping parts. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness, which reduces setup time and minimises trial‑and‑error changes. As a result, workplaces benefit from a clearer inventory logic and fewer machining interruptions when replacing inserts. The insert’s PVD‑coated carbide substrate contributes to consistent cutting action across a range of materials typically encountered in turning operations. Balanced wear resistance and stable cutting edge for demanding alloys The AH8015 grade is a PVD‑coated carbide developed as a first choice for machining heat‑resistant alloys, offering a compromise between wear resistance and cutting‑edge stability. The thin, hard PVD layer enhances edge protection at elevated temperatures while the substrate maintains toughness, so intermittent thermal loads do not translate directly into premature edge chipping. This balance leads to extended effective tool life and more predictable changeover intervals, supporting higher process reliability and reduced downtime in production environments. Practical geometry and handling that support productivity The rhombic plate with a 55° approach angle and a 0.8 mm nose radius provides a versatile geometry for finishing and medium‑depth turning operations. The double‑sided design allows multiple indexings before disposal, improving economic efficiency per insert. A cylindrical central hole secures the plate in common clamping systems and simplifies reconditioning logistics. Select a chipbreaker and grade aligned to the workpiece and stability of the setup to exploit the insert’s strengths; matching the chipformer to the material avoids built‑up edge and improves surface finish during external and internal turning. Contact Metav Werkzeuge for tailored application advice on the Tungaloy AH8015 grade and to request technical specification support by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6947149 Manufacturer SKU: TUN6947149 SKU: 6947149-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: DNMG150408 AH8015 Tungaloy-Wendeplatte Facts Insert designation: DNMG150408 Insert size: 15 mm Thickness: 4.76 mm Nose radius: 0.8 mm Approach angle: 55° Relief angle: 0° Hole: with hole — cylindrical Special features Material: carbide Coating: PVD (AH8015) Geometry: rhombic, double‑sided Application: turning — external and internal Suitable for heat‑resistant alloys Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness FAQ Which holders are compatible with this insert? Compatibility depends on the holder form, relief angle and tolerance class; the DNMG150408 AH8015 insert fits ISO‑standard holders designed for DNMG inserts and is secured via a cylindrical central hole. Is the AH8015 grade suitable for high temperatures? Yes, the AH8015 PVD‑coated carbide is designed as a first choice for machining heat‑resistant alloys, offering a balance between wear resistance and edge stability at elevated temperatures. Can this insert be used for finishing and medium turning operations? The rhombic 55° approach angle and 0.8 mm nose radius make the insert suitable for finishing and medium‑depth turning, providing good surface quality when paired with an appropriate chipformer. Does the insert allow multiple indexings? The double‑sided geometry provides multiple indexable cutting edges, which increases the usable life per insert and improves economic efficiency. What should be considered when selecting a chipformer? Choose a chipformer that matches the workpiece material, machining type and machine stability to control chip flow and avoid built‑up edge when machining with this Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 carbide, precise ISO DNMG150408 geometry and reliable chip control for consistent turning of heat‑resistant alloys; order directly via Metav Werkzeuge or request advice from our consultants. DNMG150408 AH8015 Tungaloy — ISO rhombic turning insert for turning DNMG150408 AH8015 is an ISO‑standard rhombic insert intended for general turning applications, especially developed for machining heat‑resistant alloys with a balance of wear resistance and cutting‑edge stability ISO DNMG150408 rhombic turning insert PVD-coated AH8015 carbide for heat-resistant alloys Double-sided chipbreaker for stable chip control 55° geometry with 0° negative rake, 0.8 mm corner radius Consistent fit and repeatable clamping for reliable machining The insert follows ISO dimensions and tolerances to ensure consistent fit in compatible holders; compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness. This standardisation permits predictable assembly with an appropriate outside holder or boring bar, the required underlay/clamping set and spare screws, so setup time is reduced and process repeatability is improved. The rhombic plate shape with a cylindrical central hole secures stable clamping and simple indexation, which benefits serial production and reduces tool change complexity. Balanced wear resistance and edge stability for challenging alloys The AH8015 grade is a PVD‑coated carbide designed as a first choice for the general machining of heat‑resistant alloys; it offers a compromise between wear resistance and cutting‑edge robustness. The coating reduces flank wear and improves thermal stability at elevated cutting temperatures, while the substrate supports edge integrity under interrupted cuts. The insert’s 55° geometry combined with a 0° negative rake and a 0.8 mm corner radius provides increased edge strength and a repeatable surface finish, making it suitable where reliable tool life and consistent component quality are required. Practical system integration and efficient chip control in daily use A double‑sided chipbreaker delivers controllable chip formation for a range of cutting conditions and workpiece geometries, which simplifies machining of difficult alloys and enhances process security. The plate’s 4.76 mm thickness and 15 mm size give robust support in the seat, while the double‑sided design allows economical re‑indexing to a fresh cutting edge, improving overall productivity. Integration into an ISO modular system enables fast replacements and predictable performance, supporting a cost‑efficient machining strategy over multiple shifts. For high‑temperature alloy turning, specify the Tungaloy DNMG150408 AH8015 insert and contact Metav Werkzeuge for tailored application advice and secure supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947234 Manufacturer SKU: TUN6947234 SKU: 6947234-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Facts Geometry code: 150408 Included angle: 55° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 15 mm Special features PVD coating, AH8015 grade Double‑sided chipbreaker Rhombic plate form, cylindrical central hole 0° negative rake (negative) Suitable for machining heat‑resistant alloys ISO standardised insert for turning FAQ What materials is this insert suitable for? The DNMG150408 AH8015 insert is primarily intended for the machining of heat‑resistant alloys, where the AH8015 grade offers a balance of wear resistance and edge stability. How is the insert clamped and indexed? The rhombic plate with a cylindrical central hole is clamped in a compatible ISO holder or boring bar; the system comprises the insert, the corresponding outside holder or bar, an underlay/clamping set and replacement screws. Can the insert be re‑indexed to extend tool life? Yes, the plate is double‑sided and can be indexed to expose a fresh cutting edge, allowing cost‑efficient use of both sides. Which cutting geometry affects surface finish and edge strength? The 55° included angle, 0° negative rake and 0.8 mm corner radius combine to increase edge strength and deliver a repeatable surface finish in demanding turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH8015 carbide grade and a rhombic DNMG150408 geometry with a 0.8 mm corner radius, which delivers stable cutting and consistent chip control for turning operations. Order the insert directly via Metav Werkzeuge or consult their specialists for application guidance. DNMG150408 AH8015 DNMG 150408 turning insert for Drehen by Tungaloy The DNMG150408 AH8015 is an ISO-standard rhombic turning insert designed for external and internal turning of heat‑resistant alloys, offering a balance of wear resistance and edge stability in demanding machining tasks. ISO rhombic insert DNMG150408 PVD-coated AH8015 carbide grade Double-sided chipbreaker for longer life 55° geometry for versatile turning Consistent chip control for reliable turning The combination of a double-sided chipbreaker and PVD-coated AH8015 carbide ensures controlled chip formation when machining heat‑resistant alloys. The engineered chip former reduces the risk of built-up edge and supports predictable evacuation of chips, which contributes to fewer interruptions and steadier cycle times. This results in improved productivity where repeatability and surface consistency are required, and helps maintain tool life under higher cutting temperatures. Versatile geometry for varied turning operations The rhombic plate with a 55° geometry and a 0.8 mm corner radius provides a versatile compromise between strength and accessibility to tight contours. The zero-degree clearance angle and the standard ISO form allow the insert to be used in a wide range of ISO holders and boring bars, while the indexable nature of the plate reduces tool change intervals. Such geometry supports both roughing and finishing passes when the process and holder rigidities are matched to the application. Suited for heat‑resistant alloy machining and general turning The AH8015 grade is optimised for general machining of heat‑resistant alloys, offering an even balance between wear resistance and edge stability. Where higher temperatures and abrasive conditions occur, the PVD coating improves resistance to thermal wear and maintains edge integrity over longer runs. Selection of the correct chipbreaker and grade remains essential for the specific workpiece material, machining strategy and machine/holder rigidity to achieve the desired economy and surface quality. Workshop compatibility and system advantages The insert forms part of an ISO insert system that comprises the insert itself, a matching external holder or boring bar, a shim/clamp set and fastening screws as needed. The double-sided configuration effectively halves the number of inserts used per lifetime, lowering inventory costs and tool change frequency. Compatibility with ISO-standard holders ensures straightforward integration into existing toolsets, while the standardised fixation and tolerance classes support reproducible mounting and concentricity. Contact Metav Werkzeuge for tailored application advice and to secure genuine Tungaloy DNMG150408 AH8015 inserts for productive turning operations Technical data Article number: 6947181 SKU: 6947181-Tungaloy Manufacturer SKU: TUN6947181 Designation: DNMG150408 AH8015 Tungaloy-Wendeplatte Core specifications Shape: rhombic Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Lead angle: 55° Clearance angle: 0° Hole: with hole Hole style: cylindrical hole Features & compatibility Carbide material, PVD-coated (AH8015) Double-sided chipbreaker ISO turning insert series Application: Drehen (turning) System components: insert, holder/boring bar, shim/clamp set, spare screws Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What workpiece materials is this insert best suited for? The AH8015 grade is specified for general machining of heat‑resistant alloys; the DNMG150408 AH8015 insert performs well where thermal stability and balanced wear resistance are required. Can the insert be used for both external and internal turning? Yes; the ISO rhombic form and 55° geometry make the insert suitable for external and internal turning when used with the appropriate holder or boring bar. How does the PVD coating affect performance? The PVD-coated surface on the AH8015 carbide improves thermal wear resistance and helps maintain edge stability under elevated cutting temperatures, prolonging effective tool life. What are the practical benefits of a double-sided chipbreaker? A double-sided chipbreaker allows indexable use of both cutting edges, reducing insert consumption and downtime for changes, which leads to higher process economy in batch production. Which items are required to assemble the cutting system? A complete setup typically includes the ISO insert, a compatible external holder or boring bar, a shim/clamp set and the required fastening screws for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
Built for consistent performance in demanding turning operations, the PVD‑coated AH8015 grade delivers a balanced combination of wear resistance and edge stability, while the ISO DNMG150408 geometry ensures straightforward compatibility with standard holders; order the DNMG150408 AH8015 Tungaloy indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408 AH8015 Tungaloy indexable turning insert — PVD-coated carbide, 55° The DNMG150408 AH8015 is a rhombic ISO indexable insert designed for external and internal turning, optimised for the machining of heat‑resistant alloys. ISO-standard rhombic DNMG geometry PVD-coated carbide grade AH8015 55° lead angle for versatile turning Double-sided chipbreaker, cylindrical hole Increase throughput with stable cutting performance The PVD‑coated grade AH8015 is formulated as a first choice for the general machining of heat‑resistant alloys, offering a practical compromise between wear resistance and cutting‑edge stability. This balance reduces tool changes and supports repeatable surface quality, contributing to predictable cycle times and lower process interruptions. The ISO designation DNMG150408 indicates a widely adopted rhombic form that simplifies component selection and inventory handling while maintaining consistent cutting geometry across holders and tool systems. Fit and set up quickly with standard toolholders Compatibility is driven by insert form, clearance angle and dimensions; the rhombic form, 0° relief angle and the 55° lead make this insert suitable for a broad range of turning set‑ups. The 15 mm inscribed circle size and 4.76 mm thickness suit common external and internal holders, while the cylindrical hole with screw fastening supports secure clamping and straightforward replacement. As a carbide insert with a standard hole style, it integrates into existing tool packs without special fixtures, reducing set‑up time and simplifying tool management. Controlled chips and reliable system performance A double-sided chipbreaker provides predictable chip formation and disposal when paired with an appropriate holder and cutting parameters. Selecting the correct chipbreaker and grade for the workpiece material and rigidity of the set‑up ensures stable cutting and good surface finish. The overall system comprises the indexable insert, a compatible external holder or boring bar, a shim or clamp kit and replacement screws; matching these components ensures secure seating, consistent rake and reliable repeatability during lengthier production runs. For technical application advice, material recommendations or to request DNMG150408 AH8015 inserts from Tungaloy, contact Metav Werkzeuge for tailored support and rapid fulfilment Technical data Article number: 6760652 SKU: 6760652-Tungaloy Manufacturer SKU: TUN6760652 Model series: ISO turning indexable inserts Material: carbide Core data Size (inscribed circle): 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Lead/approach angle: 55° Relief angle: 0° Hole: with cylindrical hole Features Grade/coating: AH8015, PVD-coated Insert form: rhombic (DNMG) Chipbreaker: double-sided Typical application: turning (external and internal) Compatibility: for standard ISO holders and boring bars Suitable for: heat-resistant alloys (general machining) FAQ What materials is this insert suited to machine? The DNMG150408 AH8015 Tungaloy indexable insert is designed primarily for the machining of heat‑resistant alloys and other demanding steels where a balance of wear resistance and edge stability is required. How is the insert mounted in a toolholder? Mounting uses the cylindrical hole with screw fastening; the insert seats on a matching undershim or clamp set in a standard ISO external holder or boring bar compatible with DNMG geometry. How many usable cutting edges are available per insert? This is a double‑sided indexable insert; reversing the plate provides additional cutting edges, extending the service life before disposal. What benefits does the PVD coating provide? The PVD coating on the AH8015 grade improves surface hardness and thermal resistance, supporting consistent performance under elevated cutting temperatures and contributing to stable tool life. Is the insert suitable for finishing and roughing operations? The balanced properties of the AH8015 grade make the insert appropriate for a range of operations; choice of cutting parameters and holder rigidity will determine whether it is used for roughing or finishing in a specific application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH8015 carbide and the DNMG 55° geometry for a balance of wear resistance and edge stability; compatibility with ISO toolholders ensures straightforward integration into existing turning setups. Order the DNMG150408 AH8015 insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. DNMG150408 AH8015 indexable turning insert, ISO DNMG 150408, for turning — Tungaloy A DNMG150408 AH8015 indexable turning insert from Tungaloy for general turning applications, engineered for reliable performance on heat‑resistant alloys and a wide range of steels. PVD-coated carbide AH8015 Double-sided chipbreaker Rhombic DNMG shape, 55° geometry 0.8 mm corner radius, cylindrical hole Longer tool life through a balanced PVD grade The combination of a PVD-coated surface and a cemented carbide substrate provides a dependable mix of wear resistance and edge strength, which translates into fewer insert changes and more productive machining cycles. The AH8015 grade is described as a first choice for machining heat‑resistant alloys, offering a compromise between hardness and toughness that helps maintain cutting-edge integrity under variable cutting forces. This results in extended tool life and more predictable replacement intervals, supporting stable production planning. Better chip control reduces stoppages and rework A double-sided chipbreaker integrated into the insert geometry delivers consistent chip formation during both external and internal turning operations. Stable chip control reduces the risk of entanglement and tool damage, which in turn lowers the occurrence of interrupted cycles and scrapped parts. The rhombic DNMG form and the 55° approach angle contribute to a favourable cutting force vector, helping to maintain surface finish and dimensional stability even when working with tougher alloys. Straightforward mechanical compatibility with ISO systems Compatibility with a toolholder depends on geometric factors such as form, clearance angle, tolerance class, fastening style, size and thickness. The insert has a clearance angle of 0°, a plate thickness of 4.76 mm and a 15 mm nominal size, so mechanical fit is determined by the corresponding ISO DNMG‑capable holders and clamping sets. Specifying the matching holder by DNMG interface avoids trial‑and‑error assembly and ensures repeatable seating and clamping accuracy for consistent machining results. Practical guidance for application and selection Select the AH8015 grade and the DNMG geometry when the machining task demands a balance between edge stability and resistance to abrasive wear, particularly on heat‑resistant alloys. The 0.8 mm corner radius moderates cutting edge strength and surface finish — a larger radius improves edge robustness, while smaller radii favour fine surface requirements. For uncertain cases, match the chipbreaker style to the workpiece material and the rigidity of the setup: the double‑sided breaker is versatile and suited to a range of feed rates and depths of cut. Contact Metav Werkzeuge for tailored advice on Tungaloy DNMG inserts or to request compatibility checks and order processing; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6741654 SKU: 6741654-Tungaloy Manufacturer article number: 6741654 Model series: ISO indexable turning inserts Core specifications ISO designation: DNMG150408 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Approach/lead angle: 55° Hole: with hole — cylindrical hole Materials & special features Material: cemented carbide Coating: PVD Grade: AH8015 Plate shape: rhombic Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO DNMG holders (dependant on form, clearance angle, tolerance class, fastening, size, thickness) FAQ Which machining operations is this insert suited for? The DNMG150408 AH8015 Tungaloy indexable insert (SKU 6741654-Tungaloy) is intended for both external and internal turning operations and is designed as a general‑purpose solution for those applications. What materials is the AH8015 grade optimised for? AH8015 is a PVD‑coated carbide grade recommended as a first choice for machining heat‑resistant alloys and provides a balanced combination of wear resistance and cutting‑edge stability. Is the insert indexable and reversible? Yes — the insert is double‑sided with a reversible design, allowing both cutting edges to be used and improving economy per insert compared with single‑edge alternatives. How is fit with the toolholder ensured? Compatibility for the DNMG150408 insert is ensured by matching the insert form, clearance angle (0°), tolerance class, fastening method, size (15 mm) and thickness (4.76 mm) to a corresponding ISO‑compatible DNMG holder and clamping set. What are the key geometry values to consider when planning a setup? Important values are the 55° approach geometry, 0.8 mm corner radius, plate thickness 4.76 mm, and the presence of a cylindrical locating hole; these determine cutting forces, edge strength and seating in the holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH8015 Wendeplatten - Tungaloy
High wear resistance and stable cutting-edge behaviour make this insert a reliable choice for productive turning of heat‑resistant alloys; combined with ISO conformity and straightforward holder compatibility, it supports predictable process times and reduced tooling changes. Order the DNMG150408 AH8015 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408 AH8015 — ISO rhombic turning insert, PVD‑coated carbide, 55° (Tungaloy) The DNMG150408 AH8015 is an ISO‑standard rhombic turning insert designed for general external and internal turning, offering balanced wear resistance and edge stability for machining heat‑resistant alloys. PVD-coated carbide for balanced wear and edge stability ISO rhombic DNMG 55° geometry 0.8 mm corner radius for robust finishes Compatible with standard ISO holders Faster, more predictable machining of heat‑resistant alloys The PVD‑coated carbide grade AH8015 is engineered as a first choice for general machining of heat‑resistant alloys, giving a balance between wear resistance and cutting‑edge stability. This balance translates into longer periods between tool changes and more consistent component tolerances, which supports higher overall productivity. The coating enhances oxidation and abrasion resistance at elevated cutting temperatures, reducing flank wear and helping to maintain part quality during extended cycles. Geometry and dimensions that secure reliable seating and surface quality With its 55° rhombic geometry, 0° clearance, and a 0.8 mm corner radius, the insert provides a stable cutting edge for a broad range of turning operations. The 4.76 mm plate thickness and cylindrical hole ensure positive clamping in compatible holders, while the rhombic form permits both external and internal applications where access or orientation is a factor. These design elements minimise chatter and help achieve reproducible surface finishes on demanding alloys. System compatibility for efficient tool management The indexable plate is delivered as part of the ISO‑compliant system approach: the insert, a matching external holder or boring bar, a locating shim or clamp set, and replacement screws form a complete, easy‑maintainable setup. The double‑sided chipbreaker arrangement permits economical use of each plate side, reducing tooling costs per component when compared with single‑use cutters. Standardisation through the ISO series simplifies stock handling and replacement planning across production lines. Practical selection guidance for stable production results Choose the appropriate chipbreaker and mounting stability according to the workpiece material and machining conditions: for less rigid setups, favour insert grades and chipbreakers that prioritise edge strength and controlled chip formation; for stable conditions, prioritise grades that offer enhanced wear resistance for longer tool life. The AH8015 range is optimised for a wide material spectrum of heat‑resistant alloys and delivers a reliable compromise between productivity and tool longevity, making it suitable for batch and continuous production environments. Speak with Metav Werkzeuge for expert advice on genuine Tungaloy turning solutions and to secure the DNMG150408 AH8015 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947077 Manufacturer SKU: TUN6947077 SKU: 6947077-Tungaloy Designation: DNMG150408 Grade: AH8015 Material: PVD-coated carbide Numbers / Core technical data Insert size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Geometry angle: 55° Clearance (relief) angle: 0° Hole: cylindrical Chipbreaker: double-sided Special features / Design ISO rhombic insert series Double-sided indexable plate Suitable for external and internal turning Compatible with ISO holders and clamping sets First choice for machining heat‑resistant alloys FAQ Is the DNMG150408 AH8015 insert compatible with standard DNMG holders? Yes. The DNMG150408 AH8015 is ISO‑standard and designed to fit holders specified for DNMG150408 geometry, taking into account form, relief angle, tolerance class, clamping method, size and thickness. For which materials is this grade recommended? The AH8015 grade is primarily recommended for heat‑resistant alloys as a first choice for general machining, offering a compromise between wear resistance and cutting‑edge stability for stable production. Does the insert offer indexable/reversible cutting edges? Yes. The plate is double‑sided with a double‑sided chipbreaker design, allowing rotation or indexing to present fresh cutting edges and extend usable tool life. How does the geometry influence surface finish and stability? The 55° rhombic form, 0.8 mm corner radius and 4.76 mm thickness contribute to secure seating in the holder, reduced vibration and consistent surface finish, particularly in stable clamping conditions. Which system components are required for correct mounting? A matched external holder or boring bar, a locating shim/clamp set and the appropriate replacement screw are required; the cylindrical hole and ISO‑compliant form ensure correct positioning and clamping within the system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AH905 Wendeplatten - Tungaloy
High wear resistance and consistent edge strength from the PVD-coated carbide grade AH905 deliver reliable machining results; the 55° rhombic geometry and 0.8 mm corner radius combine adaptability with a robust cutting edge. Benefit from a double-sided, ISO‑compliant insert that integrates into standard turning tool systems — order directly via Metav Werkzeuge or request further application advice from the consultants. DNMG 150408 AH905 — Tungaloy indexable turning insert for turning, PVD‑coated carbide, 55° The DNMG150408 AH905 is an ISO‑format, rhombic indexable insert engineered for general external and internal turning with a focus on process security and edge stability. PVD-coated carbide for wear resistance 55° rhombic geometry for versatile turning 0.8 mm corner radius for durable edge Double-sided chipbreaker, with cylindrical hole Consistent cutting performance for industrial turning The insert grade is built on PVD‑coated carbide (AH905), a combination that emphasises wear resistance and improved resistance to chipping under interrupted cuts. This makes the component particularly suitable where a sharp cutting edge and process security are required. The coating reduces flank wear and helps to maintain dimensional accuracy over longer tool life, so machining cycles remain predictable and scrap rates are reduced. Results are stable across a range of turning tasks, from finishing passes to more demanding light roughing, when the matching chipbreaker and holder stability are selected. Geometry and edge design that support productivity Designed with a 55° rhombic shape and a 0.8 mm corner radius, the insert balances edge strength and surface finish: the angle gives good approach geometry for a broad range of diameters, while the radius improves load distribution at the tip to resist premature wear. The double-sided chipbreaker aids chip control on both indexable faces and helps maintain consistent cutting forces. With a 4.76 mm thickness, the plate provides the mechanical stiffness required for stable engagement in the tool holder, contributing to reproducible surface quality and reduced vibration during cuts. System compatibility and practical handling in the workshop Manufactured to ISO dimensions, the insert features a cylindrical hole for secure clamping and quick indexing in compatible tool holders. Compatibility with a chosen holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so the insert integrates smoothly into existing tool systems when the correct matching seat and screw are used. As an indexable insert, it offers straightforward re-indexing and minimal setup time, supporting efficient changeover and inventory management in production environments. For mixed production runs, selecting the appropriate chipbreaker and grade ensures the best balance between tool life and surface finish. For specific application recommendations on the Tungaloy DNMG150408 AH905 insert and to arrange supply through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct technical consultation. Technical data Article number: 6859406 Manufacturer SKU: TUN6859406 SKU: 6859406-Tungaloy Model series: ISO indexable turning inserts Facts Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Special features PVD-coated carbide (AH905) Material: carbide Rhombic plate form Double-sided chipbreaker Cylindrical hole Application: turning FAQ What machining tasks is this insert intended for? The DNMG150408 AH905 insert is intended for external and internal turning; selection of chipbreaker and grade should match the workpiece material and the stability of the setup. Is the insert reversible and suitable for multiple indexing? Yes, the insert is double-sided and reversible, providing multiple usable edges for extended service life before replacement. How is the plate secured in the tool holder? The insert uses a cylindrical hole and ISO seat geometry for clamping; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. What benefits does the AH905 grade bring to the turning process? The AH905 grade is a wear‑ and fracture‑resistant PVD‑coated carbide developed for turning applications where a sharp cutting edge and process reliability are required. Can this insert be used for internal turning operations? Yes, the geometry and ISO format of the DNMG150408 AH905 support both external and internal turning when paired with an appropriate holder and stable setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AT9530 Wendeplatten - Tungaloy
Benefit from the combination of precise surface finish, predictable tool life and ISO compatibility for reliable turning operations; order the DNMG150408 AT9530 directly via Metav Werkzeuge or consult the advisers if needed. DNMG 150408 AT9530 — ISO turning insert for finishing, Tungaloy A DNMG150408 AT9530 indexable insert designed for precision external and internal turning, optimised for fine finishing of Stahl. Coated cermet grade AT9530 for finishing ISO DNMG150408 rhombic insert, 0° relief Double-sided chipbreaker with cylindrical hole Consistent surface finish and even wear Precision finishing and predictable tool life The AT9530 grade is a coated cermet developed specifically for fine finishing and light machining of Stahl, with emphasis on achieving superior surface finish and uniform wear behaviour. Cermet combines ceramic hardness and thermal stability with sufficient metallic toughness, so the cutting edge sustains a sharp profile during finishing passes. This results in improved dimensional consistency and less rework in serial production. The coating enhances resistance against adhesion and microchipping at typical finishing feeds, supporting longer intervals between indexing or tool changes. Secure clamping and ISO conformity for reliable results Built to ISO dimensions in the DNMG form, the insert’s rhombic geometry and 0° relief offer versatility for both external and internal turning operations while maintaining consistent contact with the workpiece. The design includes a cylindrical hole for secure clamping, a plate thickness of 4.76 mm and a corner radius of 0.8 mm, factors that directly influence strength, chip evacuation and achievable surface integrity. Compatibility with toolholders is determined by form, relief angle, tolerance class, fastening method, size and thickness; matching the insert to an appropriate holder and clamp set ensures repeatable, vibration-free cutting conditions. Productivity advantages for finishing applications The incorporated double-sided chipbreaker promotes controlled chip formation and stable cutting forces, which supports repeatable surface quality across indexed edges and reduces downtime. The coated cermet substrate performs well in finishing passes on Stahl, delivering a fine, consistent surface that can minimise subsequent finishing operations. Designed for ease of use in standard ISO tool systems, the insert contributes to efficient machining cycles and predictable tool-life management. For specific machining parameters or to verify holder compatibility, additional technical data can be provided by Metav Werkzeuge. Contact Metav Werkzeuge for application advice on Tungaloy finishing inserts and to secure the DNMG150408 AT9530—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6728360 Manufacturer SKU: TUN6728360 SKU: 6728360-Tungaloy Manufacturer: Tungaloy Numbers / core technical data Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 15 mm Included angle: 55° Relief angle: 0° Special features / materials Coated cermet grade AT9530 Carbide substrate Double-sided chipbreaker Rhombic plate form With cylindrical hole Intended for turning; finishing and light machining of Stahl ISO DNMG150408 format Compatible with matching ISO external holders and boring bars FAQ Is this insert suitable for finishing steel components? The DNMG150408 AT9530 insert is optimised for finishing and light machining of Stahl; the coated cermet grade prioritises surface quality and uniform wear. How does the insert clamp to the toolholder? The insert features a cylindrical hole for secure clamping; compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness. What geometry delivers the best surface finish with this grade? The rhombic DNMG form with a 0° relief and a 0.8 mm corner radius supports fine finishing passes and repeatable surface integrity when used with appropriate feeds and speeds. Which SKU identifies this item for ordering? The article is listed under SKU 6728360-Tungaloy (manufacturer article number 6728360). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AT9530 Wendeplatten - Tungaloy
Benefit from the AT9530 coated cermet grade and the rhombic DNMG geometry to achieve high surface quality and uniform wear during finishing and light turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150408 AT9530 Tungaloy indexable insert 150408 for turning DNMG150408 AT9530 is an indexable turning insert optimised for finishing and light machining of steel, designed to deliver consistent surface quality and predictable wear in ISO insert systems Coated cermet grade AT9530 Rhombic DNMG 150408 geometry 0.8 mm corner radius for fine finishes Double-sided chipbreaker with cylindrical hole High-quality finishing with coated cermet performance The AT9530 coated cermet grade is engineered for finishing and light machining of steel, emphasising a fine surface result and steady flank wear. The microstructure of the cermet substrate, combined with a wear-resistant coating, reduces adhesion and built-up edge tendencies during low-to-moderate cutting forces, which translates into longer intervals between edge changes and a more consistent workpiece finish. As a consequence, production runs that prioritise dimensional accuracy and surface integrity can operate with fewer interruptions and more predictable results. System compatibility and secure clamping for stable turning This insert belongs to the ISO indexable turning insert family and requires a matching holder defined by geometry, relief angle, tolerance class, fastening method, size and thickness. The data sheet specifies a 15 mm size and a 4.76 mm plate thickness, with a cylindrical hole that supports precise locating and repeatable clamping. Correctly pairing the insert with the appropriate external holder or boring bar, plus the correct backing and clamping set, ensures stable cutting conditions and reduces vibration, which is essential for achieving the surface finish benefits offered by the grade. Geometry and chip control that support consistent results The rhombic plate form combined with a nominal approach angle of 55° and a 0° relief produces a cutting geometry that is well suited to both external and internal turning tasks where surface quality is paramount. The double-sided chipbreaker design promotes manageable chip formation during finishing passes, reducing the risk of tangling or workpiece damage. The 0.8 mm corner radius balances edge strength with the ability to achieve fine radii on the component, offering a compromise between durability and the aesthetic/functional demands of machined faces. Practical application notes and process optimisation For best results in finishing applications, select the chipbreaker and grade combination that matches workpiece material, machining strategy and machine-tool rigidity. The insert is intended primarily for steel, and its cermet composition supports low cutting forces in fine-turning regimes. The recommended system configuration comprises the ISO insert, a compatible external holder or boring bar, the correct backing/clamping kit and replacement screws. Regular inspection of seat surfaces and torque control on the clamping screws contributes to repeatability and tool life, helping to exploit the AT9530 advantages in everyday production. Contact Metav Werkzeuge for tailored application advice on Tungaloy inserts and availability — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data Article number (SKU): 6773692-Tungaloy Manufacturer item no.: 6773692 Manufacturer SKU: TUN6773692 Brand: Tungaloy Series: ISO indexable turning inserts Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Lead/approach angle: 55° Relief angle: 0° Special features Grade/coating: AT9530 Cutting material type: coated cermet Plate form: rhombic Hole: cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) Model series: ISO indexable turning inserts FAQ What distinguishes the AT9530 grade from other inserts? The AT9530 grade is a coated cermet developed for finishing and light machining of steel; the DNMG150408 AT9530 Tungaloy indexable insert (SKU 6773692-Tungaloy) provides enhanced surface quality and uniform wear compared with conventional carbide grades in comparable finishing tasks. Is this insert suitable for both external and internal turning? Yes, the rhombic geometry and double-sided chipbreaker make the DNMG150408 AT9530 suitable for both external and internal turning operations when paired with the correct holder and clamping components. Can the insert be indexed to use both cutting edges? The insert is double-sided and designed for indexing; the DNMG150408 AT9530 Tungaloy indexable insert (manufacturer item no. 6773692) allows cost-effective reuse of multiple cutting edges subject to correct handling and seating. How does one ensure holder compatibility for this ISO insert? Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness — check that the chosen holder matches the DNMG150408 dimensions (15 mm size, 4.76 mm thickness) and mounting features before assembly. What are the key dimensions and geometry to note for setup? Key values are: plate size 15 mm, thickness 4.76 mm, corner radius 0.8 mm, approach angle 55° and a relief angle of 0°; the insert also features a cylindrical locating hole for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade (AT9530), ISO-standard rhombic geometry and a double-sided chipbreaker to achieve consistently high surface finish and reliable wear behaviour; order the insert directly via Metav Werkzeuge or contact the technical advisors for tailored cutting data. DNMG150408 AT9530 Tungaloy – ISO rhombic turning insert, 55° lead angle DNMG150408 AT9530 Tungaloy is an ISO rhombic indexable insert designed for fine and light turning operations, optimised for achieving excellent surface quality on steel. Cermet coating AT9530 for fine finishing ISO rhombic DNMG150408 geometry, 55° Double-sided chipbreaker for reliable chips Cylindrical hole mounting, precise fit Superior finishing performance for steel turning The coated cermet AT9530 substrate is engineered for finishing and light cuts on steel, delivering a noticeably improved surface finish compared with standard carbide grades. Cermet combines ceramic hardness with metallic toughness to reduce built-up edge and enable stable cutting at finishing feeds. This results in fewer rework cycles and a more predictable part appearance, especially when surface integrity is critical. Stable wear behaviour and dependable chip control The insert’s double-sided chipbreaker promotes consistent chip formation during both external and internal turning, helping to avoid interruptions caused by erratic chips. The coating and substrate combination encourage even wear across the cutting edge, extending usable edge life and maintaining dimensional consistency over multiple passes. For operations where repeatability and minimal variation are required, this insert provides dependable performance. Precision fit and straightforward holder compatibility Manufactured to ISO dimensions, the rhombic DNMG150408 geometry and central cylindrical hole enable accurate locating in matching indexable holders. Compatibility with a given holder depends on form, clearance angle, tolerance class, fastening method, size and thickness; selecting the correct clamping set and replacement screws ensures secure mounting and repeatable positioning. The standardised form simplifies inventory and changeover in mixed-operation environments. Controlled geometry for finishing cuts Key dimensions such as the 0° clearance angle, 0.8 mm corner radius and 4.76 mm plate thickness make this insert particularly suited to light cuts where surface quality and edge finish matter. The 55° lead angle balances cutting forces and accessibility, offering a compromise between strength and fine-detail machining. When paired with a suitable external holder or boring bar and appropriate cutting parameters, the insert reduces vibration and supports consistent part quality. Contact Metav Werkzeuge for supply and cutting-parameter support for Tungaloy inserts; technical advisors are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to recommend the optimal holder and feeds for specific steel grades Technical Data Article number: 6765005 Manufacturer SKU: TUN6765005 SKU: 6765005-Tungaloy Model series: ISO-Drehwendeschneidplatten Core dimensions Geometry: DNMG150408 Size: 15 mm Thickness: 4,76 mm Corner radius: 0.8 mm Clearance angle: 0° Lead angle: 55° Hole: with cylindrical hole Materials & features Substrate/coating: coated cermet AT9530 Material: carbide Chipbreaker: double-sided Application: turning (external and internal) Mounting: indexable insert with central hole Standard: ISO FAQ What materials is this insert intended for? The DNMG150408 AT9530 Tungaloy insert is intended primarily for finishing and light turning of steel, with the coated cermet grade optimised for surface quality and uniform wear. Can this insert be used for both external and internal turning? Yes, the insert is suitable for both outer and inner turning operations when paired with the correct external holder or boring bar and clamping set. Which dimensions and geometry should be noted for holder selection? Key dimensions to consider are DNMG150408 geometry, 15 mm size, 4.76 mm thickness, 0.8 mm corner radius and the 0° clearance; the central cylindrical hole requires matching fastening and support. How does the AT9530 cermet grade affect machining? The AT9530 coated cermet provides improved surface finish and reduced built-up edge in finishing cuts, promoting even wear and consistent edge life under light cutting conditions. Is the insert compatible with ISO-standard holders? Compatibility is determined by the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; using ISO-compliant holders and proper clamping ensures accurate positioning of the indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet AT9530 for superior surface finish, a rhombic 55° geometry for versatile external and internal turning, and a secure clamping design for predictable tool life; order the inserts directly via Metav Werkzeuge or contact our consultants for application advice. DNMG150408 AT9530 turning insert — rhombic 55° for turning (Tungaloy) The DNMG150408 AT9530 is an ISO-standard rhombic turning insert designed for finish and light turning of steel, offering a coated cermet grade for improved surface quality and consistent wear behaviour Coated cermet AT9530 for fine surface finish Rhombic 55° geometry for versatile turning Double-sided chipbreaker for stable machining Cylindrical hole for secure mounting Consistent finish and controlled wear for steel turning The coated cermet AT9530 grade prioritises surface quality and even wear, making it particularly suitable for finish and light machining of steel components. The coating improves edge integrity and reduces built-up edge during low- to medium-depth cuts, which translates into fewer surface rework cycles and more predictable component quality. The combination of a fine-grain substrate and a tailored coating enables the insert to maintain a sharp cutting profile across longer tool life, supporting stable dimension and surface consistency in production runs. Design that supports versatile turning operations With a rhombic 55° geometry and an inscribed-circle size of 15 mm, this insert suits a wide range of external and internal turning tasks where access and approach angles matter. The 0° clearance/rake angle provides a neutral cutting action that helps maintain form and avoids excessive cutting forces in finish applications. The 0.8 mm corner radius offers a balance between edge strength and surface finish; the modest radius reduces the risk of chatter while preserving fine edge definition. Compatibility with ISO holders depends on form, clearance angle, tolerance class, fastening and plate thickness, ensuring safe and repeatable clamping when the correct holder is selected. Practical chip control and secure clamping for productivity The double-sided chipbreaker design promotes predictable chip formation in finish turning, reducing the incidence of long, stringy chips that can interrupt automated processes. The insert’s cylindrical hole enables positive mechanical location and reliable screw clamping, supporting repeatable seating and easier indexation when the cutting edges are rotated. These mechanical features reduce set-up variation and support higher machine uptime, which is critical in both job-shop and production environments that prioritise process reliability. Selection guidance and application scenarios Choose this insert when the priority is high surface quality on steel parts produced by finish or light turning, and when consistent wear behaviour is required across batches. The plate thickness of 4.76 mm and ISO designation 150408 indicate the insert’s structural rigidity and form factor; match the insert to a compatible external holder or boring bar that accommodates the rhombic form and the 4.76 mm thickness. For less stable set-ups or heavy interrupted cuts, consider larger corner radii or different grades optimised for roughing to protect the cutting edge. For technical advice and stock information on Tungaloy DNMG150408 AT9530 turning inserts, contact Metav Werkzeuge for application support and availability via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 6748205 SKU: 6748205-Tungaloy Manufacturer SKU: TUN6748205 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: 150408 Facts Cutting angle: 55° Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle size: 15 mm Clearance/rake angle: 0° Special features Coated cermet grade AT9530 Rhombic plate form (DNMG) Double-sided chipbreaker Cylindrical hole for fastening Application: turning (finish and light machining of steel) Material: cemented carbide FAQ What material applications suit this insert best? The insert is optimised for finish and light turning of steel, with the AT9530 coated cermet designed to deliver good surface finish and uniform wear on such materials. How is the insert fixed in the holder? The rhombic plate features a cylindrical hole and is secured by screw clamping to compatible ISO turning holders; correct holder selection ensures reliable clamping for the DNMG150408 AT9530 insert. What does the designation DNMG150408 indicate? DNMG denotes the rhombic plate form, and the ISO code 150408 specifies the inscribed circle size, thickness and corner radius attributes that define the insert’s geometry. Is this insert indexable on both sides? Yes, the insert is double-sided with a chipbreaker on both cutting edges, allowing indexation to use multiple edges and extend productivity between tool changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com