DNMG 150408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a finishing-grade NS9530 uncoated cermet, ISO compatibility and a 0.8 mm corner radius for consistently high surface quality and low cutting forces; order genuine inserts via Metav Werkzeuge or consult our team for application advice. DNMG150408 NS9530 Tungaloy indexable turning insert — ISO turning insert for finishing steel, 55° rhombic geometry A DNMG150408 NS9530 Tungaloy indexable insert designed for precision external and internal turning, optimised as a finishing grade for steel with low cutting forces and a sharp cutting edge. ISO DNMG 150408 format, 55° cutting geometry NS9530 uncoated cermet for finishing steel 0° clearance angle for stable cutting 0.8 mm corner radius for fine surface finish Double-sided insert with cylindrical hole Precision finishing for steel turning The uncoated cermet NS9530 is specified for finishing operations where a sharp cutting edge and low cutting forces are essential. As a finishing grade, it delivers a superior surface finish on steel in continuous cutting conditions and when using small depths of cut. The fine edge geometry reduces built-up edge and enables consistent part quality, making this insert particularly suitable for components that require tight tolerances and excellent visual appearance. The combination of grade and geometry yields a reliable balance between surface integrity and tool life. Compatibility, clamping and mounting considerations This insert follows the ISO DNMG150408 standard format and is compatible with ISO holders when form, relief angle, tolerance class, mounting method, size and thickness match. The rhombic shape with a 55° approach angle supports both external and internal turning strategies, while the cylindrical hole ensures secure clamping with standard screws and clamp assemblies. When selecting a holder, confirm the seating design and tolerance class to maintain repeatable positioning and to avoid chatter; correct clamping contributes directly to process stability and consistent component quality. Material behaviour and why cermet works here Cermet cutting materials combine ceramic and metallic properties to offer excellent edge stability and a resistance to plastic deformation at the cutting edge. The NS9530 grade, being uncoated, is tuned for fine finishing on steel: it keeps the edge sharp under continuous cuts and small feed rates, producing low cutting forces and improved surface roughness. For operators unfamiliar with cermet behaviour: the material excels in stable cutting windows and is less tolerant of heavy interrupted cuts than some coated carbides, so it is ideal for dedicated finishing passes and high-quality external profiles. Process benefits and shop-floor effects Using a purpose-designed finishing insert such as this leads to tangible production advantages: shorter secondary processing, reduced rework, and more predictable part-to-part quality. The 0.8 mm corner radius supports fine transitions on turned contours and helps achieve required surface specifications without sacrificing edge strength. The double-sided configuration provides economical indexability, while ISO conformity simplifies tool inventory and changeovers. Overall, the insert contributes to efficient machining cycles, consistent finishing results and predictable tool replacement intervals. Contact Metav Werkzeuge for tailored application advice and availability of genuine Tungaloy DNMG150408 NS9530 inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998152 Manufacturer SKU: TUN6998152 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Geometry: DNMG150408 / 55° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 15 mm Clearance angle: 0° Hole style: cylindrical hole Chipbreaker: double-sided Plate shape: rhombic Special features Uncoated cermet cutting material NS9530 Finishing grade for steel with sharp cutting edge Intended application: Turning (external and internal) Compatibility requires matching holder form, relief angle and tolerance class System: ISO turning insert, appropriate external holder or boring bar, shim/clamp set and replacement screws FAQ What machining tasks suit this insert best? This DNMG150408 NS9530 insert is intended for precision finishing in turning operations on steel, providing low cutting forces and high surface quality in continuous cuts. Can the insert be used for internal turning as well as external turning? Yes. The DNMG150408 format and 55° rhombic geometry make the insert suitable for both external and internal turning when the correct holder and mounting are used. How does the NS9530 grade compare to coated carbides for finishing? The NS9530 uncoated cermet offers a very sharp edge and excellent surface finish on steel; it is well suited to continuous finishing passes, though it is less tolerant of heavy interrupted cuts than some coated carbide grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 NS9530 Wendeplatten - Tungaloy
Data inconsistency: the field "material" is listed as "Hartmetall" while the cutting material is described as "uncoated Cermet" — please verify the product data to ensure accuracy and consistency, as discrepancies like this can lead to confusion or errors in product classification, potentially impacting inventory management, customer understanding, or manufacturing processes, so it is essential to confirm whether "Hartmetall" is the correct designation for the material or if the cutting material description as "uncoated Cermet" is accurate, and if necessary, update the database or documentation to reflect the correct and consistent information for all users and stakeholders involved.
DNMG 150408 NS9530 Wendeplatten - Tungaloy
The combination of a sharp uncoated cermet grade and an ISO‑standard DNMG form ensures reliable finishing performance and consistent surface quality; benefit from low cutting forces and compatibility with standard external holders. Order the DNMG150408 directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408 NS9530 turning insert — finishing for steel (Tungaloy) DNMG150408 NS9530 is an ISO‑standard turning insert designed for finishing operations on steel, offering a sharp cutting edge and low cutting forces for continuous, fine‑feed turning. ISO‑standard DNMG form for universal holders Uncoated cermet grade NS9530 for finishing Sharp cutting edge for superior surface finish Consistent finishing with an uncoated cermet for low cutting forces The DNMG150408 is an ISO‑normed, rhombic turning insert made in the uncoated cermet grade NS9530, designed specifically for finishing cuts on steel. The sharp cutting edge reduces cutting forces, which lowers heat generation and helps to maintain dimensional accuracy during continuous cuts. The small 0.8 mm nose radius balances edge strength with the ability to achieve a fine surface finish, while the 55° wedge angle provides predictable chip flow and stable turning behaviour. For shops seeking repeatable, high‑quality external or internal turning results, this grade offers measurable improvements in finish and reduced need for secondary polishing. Simple integration into standard tool systems and clear compatibility criteria Compatibility with holders is determined by form, relief angle, tolerance class, clamping method, size and plate thickness; the DNMG150408 has a 0° relief angle, a 4.76 mm plate thickness and comes with a cylindrical hole for secure clamping in standard DNMG‑type external holders or boring bars. The insert is double‑sided with a chipbreaker on both faces, enabling economical indexable use. When specifying a holder set, confirm seat geometry and screw or clamp type to ensure correct seating and repeatable tool position. A correct tool‑holder match reduces chatter and prolongs both insert and toolholder life. Practical selection tips and machining guidance for finishing steel Choose the NS9530 grade and its double‑sided chipbreaker for continuous cuts and small depths of cut; the grade excels at producing high‑quality surfaces with low cutting forces. Avoid heavy interrupted cuts and excessive feed rates that overload the sharp edge—this insert is optimised for fine feeds and steady cutting conditions. If switching from coated carbide, expect improved surface integrity at finishing parameters; adjust speeds and feeds conservatively when first testing the grade. Use coolant or MQL according to machine and workpiece requirements to aid chip evacuation and thermal control. For precise finishing applications with Tungaloy quality, contact Metav Werkzeuge for availability and machining recommendations: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6998167 SKU: 6998167-Tungaloy Manufacturer SKU: TUN6998167 Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Core technical data ISO designation: DNMG150408 Size: 15 mm Plate thickness: 4.76 mm Relief angle: 0° Wedge angle: 55° Nose radius: 0.8 mm Hole: with hole (cylindrical) Special features Grade: NS9530 (uncoated cermet) Material (substrate): cemented carbide Plate form: rhombic Chipbreaker: double‑sided Application: Turning (finishing on steel) FAQ What machining tasks suit this insert best? This insert is designed for finishing operations in turning; the DNMG150408 NS9530 Tungaloy turning insert achieves low cutting forces and a high surface quality on steel during continuous cuts. Is the insert compatible with standard DNMG holders? Yes, compatibility is achieved when holder seat geometry, clamp type and the insert's 0° relief, size and thickness are matched to the DNMG150408 form and ISO tolerances. How many usable edges does the insert provide? The DNMG150408 is double‑sided with a chipbreaker on both faces, allowing multiple indexed cutting edges before replacement is required. What workpiece materials are recommended? The NS9530 grade is optimised for finishing on steel; the cutting grade and sharp edge suit continuous steel turning with small depths of cut. Which feature most improves surface finish? The combination of the sharp cutting edge, the 0.8 mm nose radius and the uncoated cermet NS9530 grade contributes most to achieving consistent high‑quality surface finishes. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150408 NS9530 Wendeplatten - Tungaloy
DNMG150408 NS9530 Wendeplatte (Drehen) von Tungaloy Die DNMG150408 NS9530 Wendeplatte ist eine ISO-genormte Schlichtsorte für präzises Außen- und Innendrehen. Hohe Oberflächengüte bei kleinen Zustellungen Scharfe Schneidkante für kontinuierlichen Schnitt Rhombische Platte 15 mm, Eckenradius 0,8 mm Mit zylindrischem Loch für sicheren Sitz Unbeschichtetes Cermet NS9530 für Stahlbearbeitung Überzeugende Standzeit durch Materialwahl und Geometrie Die Kombination aus Hartmetall-Träger und unbeschichtetem Cermet der Sorte NS9530 sorgt für niedrige Schnittkräfte und eine ausgeprägte Schnittschärfe. Dadurch reduziert sich der Kraftbedarf beim Drehen, was die Werkzeugstandzeit erhöht und die Maschinenbelastung senkt. Anwender profitieren von konstanter Oberflächengüte bei Schlichtoperationen, insbesondere bei kontinuierlichem Schnitt und feinen Schnitten. Praktischer Nutzen im Fertigungsalltag Für das Außen- und Innendrehen bietet die DNMG150408 durch ihren Eckenradius 0,8 mm und den Freiwinkel 0° präzise Konturtreue und gute Formstabilität. Die Platte wurde für geringe Schnittbreiten optimiert; das Ergebnis sind reproduzierbare Bauteilmaße und weniger Nacharbeit. Die doppelseitigen Spanbrecher ermöglichen wirtschaftliches Drehen durch einfache Wendung und lange Nutzungsintervalle. Einfache Systemintegration und Handhabung Die ISO-genormte Ausführung gewährleistet Kompatibilität zu gängigen Haltern; entscheidend sind Form, Befestigung, Größe und Dicke der Platte. Die rhombische Form mit Plattendicke 4,76 mm und Plattengröße 15 mm ist vielseitig einsetzbar, das zylindrische Loch sichert die Montage. Ersatzschrauben und Unterlagen gehören zum typischen Systemaufbau und erleichtern den Wechsel im Produktionsablauf. Kurz erklärt: Cermet und Schlichtsorte Cermet ist ein Verbundwerkstoff aus keramischen und metallischen Phasen, der sehr scharfe Schneidkanten ermöglicht und speziell für Schlichtoperationen entwickelt wurde. Die Sorte NS9530 ist eine Schlichtsorte für Stahl, ausgelegt auf niedrige Zustellungen und kontinuierliche Schnitte; sie liefert hohe Oberflächenqualität ohne zusätzliche Beschichtung. Für wirtschaftliche Schlichtbearbeitung empfiehlt sich die DNMG150408 NS9530 von Tungaloy; bei Rückfragen oder für technische Details Kontakt: info@metav-werkzeuge.com, +49 2822 7131930 Produktmerkmale Artikelnummer: 6998176 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: DNMG150408 NS9530 Tungaloy-Wendeplatte SKU: 6998176-Tungaloy Fakten Eckenradius: 0,8 mm Winkel: 55° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 15 mm Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet (NS9530) Plattenform: rhombisch Loch: mit Loch, zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten FAQ Welche Werkstoffe bearbeitet die Platte am besten? Die DNMG150408 NS9530 von Tungaloy ist als Schlichtsorte für Stahl ausgelegt und erzielt dort beste Ergebnisse; die unbeschichtete Cermet-Sorte NS9530 reduziert Schnittkräfte und verbessert die Oberflächengüte. Ist die Platte mit allen ISO-Haltern kompatibel? Die DNMG150408 NS9530 ist ISO-genormt und passt zu gängigen Haltern, die Form, Befestigung, Größe und Dicke unterstützen; für exakte Passung bitte Halterdaten mit der Plattenspezifikation abgleichen. Wie wirkt sich der Eckenradius auf das Ergebnis aus? Der Eckenradius von 0,8 mm der DNMG150408 NS9530 bietet eine gute Balance aus Schnittstabilität und Oberflächenqualität und eignet sich besonders für feine Schlichtzustellungen. Kann die Platte gewendet werden? Ja, die Platte verfügt über doppelseitigen Spanbrecher und lässt sich zum wirtschaftlichen Ausnutzen der Schneidkanten wenden; das erhöht die Nutzungsdauer pro Platte. Welche Besonderheiten hat die Sorte NS9530? NS9530 ist eine Schlichtsorte in unbeschichtetem Cermet mit sehr scharfer Schneidkante, entwickelt für kontinuierliche Schnitte in Stahl und zur Erzielung hoher Oberflächengüten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 150408 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a finishing-grade uncoated cermet, precise ISO geometry and a 0.8 mm corner radius for consistently high surface quality; order through Metav Werkzeuge or consult our technical team for application support. DNMG150408 NS9530 Tungaloy turning insert — finishing, uncoated cermet for turning DNMG150408 NS9530 Tungaloy turning insert is a rhombic ISO insert engineered for finishing operations in external and internal turning applications. Finishing grade NS9530 for steel Uncoated cermet cutting material Rhombic 55° geometry, 0° rake Double-sided chipbreaker with cylindrical hole Superior surface quality for finishing cuts The NS9530 grade is an uncoated cermet developed for low cutting forces and exceptionally high surface finish during finishing passes in steel. With a 0.8 mm corner radius and a sharp cutting edge, the insert reduces vibration and leaves a consistent profile when used in light depths of cut. The focused design of this finishing grade helps to achieve tight dimensional tolerances and repeatable part quality, which is essential in serial production and precision components. Reliable ISO fit and straightforward toolholder compatibility The insert follows ISO geometry conventions, so compatibility with a matching holder is determined by form, clearance, tolerance class, fastening and plate dimensions. The rhombic 55° geometry and 0° rake require holders designed for DNMG-style plates; correct selection ensures stable clamping and predictable chip flow. Because the fit depends on size and thickness, the 15 mm size and 4.76 mm thickness should be matched to the holder specification to guarantee secure seating and consistent tool life. Material behaviour and machining recommendations Manufactured from a cermet cutting material on a carbide substrate, this plate excels under continuous cutting conditions and small feed or depth settings typical of finishing operations. The double-sided chipbreaker and cylindrical hole provide reliable indexability and clamping repeatability, permitting quick rotation to a fresh edge and reducing setup time. For steel finishing, the insert performs best with modest cutting speeds and stable machine-tool-fixture combinations to exploit its sharp edge and produce superior surface integrity. Productivity and handling advantages in daily use Using this ISO-standard insert streamlines inventory management by offering an indexable, double-sided solution that reduces per-part tooling cost. The DNMG150408 form factor allows straightforward re-indexing and fewer tool changes, supporting continuous production runs. Combined with proper holder selection and coolant strategy, this insert contributes to reduced cycle times and improved part-to-part consistency, making it suitable for job shops and production environments focused on reliable finishing performance. Contact Metav Werkzeuge for availability and application advice on Tungaloy finishing inserts; our team is available at info@metav-werkzeuge.com or +49 2822 7131930 to assist with holder selection and process optimisation Technical Data Article number: 6998278 Manufacturer SKU: TUN6998278 SKU: 6998278-Tungaloy Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Size: 15 Thickness: 4.76 mm Corner radius: 0.8 mm Geometry angle: 55° Rake angle: 0° Special features Rhombic plate form Double-sided chipbreaker Cylindrical hole for secure clamping Uncoated cermet grade NS9530 Suitable for external and internal turning Carbide construction FAQ What materials is this insert best suited for? The DNMG150408 NS9530 insert is designed primarily for finishing in steel and performs best in continuous cutting with small depths of cut to achieve high surface quality. How is the insert mounted and indexed? The plate uses a cylindrical hole and is double-sided; secure clamping in a compatible DNMG holder allows simple re-indexing to a second cutting edge. Can this insert be used for roughing operations? This finishing-grade NS9530 insert is optimised for finishing rather than heavy roughing; for high-material-removal operations, a different grade or geometry is recommended. What is the corner radius and why does it matter? The corner radius is 0.8 mm, which balances edge strength with the ability to produce fine surface finishes and small profile radii in turned components. Is this an ISO-standard insert for easy replacement? Yes, the insert follows ISO dimensions for DNMG-style plates, enabling straightforward replacement in compatible toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T505 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T505, a double-sided chipbreaker, and ISO conformity for reliable, economical turning of cast iron; order genuine Tungaloy inserts through Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation. DNMG150408 T505 – Indexable turning insert for turning applications by Tungaloy A DNMG150408 T505 indexable turning insert designed for economical and productive machining of cast iron components. DNMG150408 ISO rhombic insert, 55° cutting angle CVD-coated carbide T505 for cast iron machining Double-sided chipbreaker, economical indexing Cylindrical hole for secure clamp mounting Productive cast-iron turning with a grade built for economy The CVD-coated carbide grade T505 is engineered for the efficient machining of cast iron, combining wear resistance with consistent cutting performance. As an indexable turning insert, it provides multiple usable edges so tool changeover is fast and waste is reduced; this supports continuous production runs and lowers per-part machining costs. The substrate and coating pairing ensures stable chip formation under typical interrupted and continuous turning conditions, translating directly into more predictable tool life and fewer unplanned stoppages. Compatibility and secure mounting for reliable process set-up Compatibility depends on form, relief angle, tolerance class, fixation and size; the rhombic ISO DNMG150408 shape with a cylindrical hole fits common DIN-compatible holders when matched to the correct tolerance and clamping system. The insert’s 0° relief angle and 55° lead angle help define cutting geometry for finishing and medium-depth roughing tasks. A 0.8 mm corner radius balances edge strength and surface finish, making the insert suitable for both general turning and operations where a controlled corner is required. Process benefits: chip control, indexing and handling The double-sided chipbreaker is designed to promote predictable chip breaking on grey and nodular cast irons, improving machine cleanliness and operator safety. Being double-sided affords two usable cutting edges per orientation, which enhances economy by extending productive life before indexing or replacement. The secure clamping enabled by the cylindrical hole and standard screw fixation reduces the risk of insert movement under load, thereby maintaining dimensional accuracy and repeatability of machined parts. Choosing the right application and getting the most from the insert Select the appropriate chipbreaker and grade relative to workpiece stability, cutting speed and interruption severity; the T505 composition is particularly suited to cast-iron applications but requires correct holder geometry to deliver the promised results. For mixed production where different materials are encountered, verify compatibility with the chosen holder and consider reserve stocks of inserts to avoid production delays. Clear documentation of holder type, clamp style and tolerance class will speed up correct selection and reduce the risk of mismatch. For expert selection advice or to order genuine Tungaloy DNMG150408 T505 indexable inserts, contact Metav Werkzeuge via email at info@metav-werkzeuge.com or call +49 2822 7131930; our application consultants will advise on grade choice and holder compatibility to optimise machining output. Technical data Article number: 6831239 Manufacturer SKU: TUN6831239 SKU: 6831239-Tungaloy Model series: ISO turning indexable inserts Material: carbide Grade/sort: T505 Insert designation: DNMG150408 Application: turning Facts Thickness: 4.76 mm Insert size: 15 mm Corner radius: 0.8 mm Relief angle: 0° Lead/cutting angle: 55° Hole: with hole (cylindrical) Special features CVD-coated carbide for cast-iron machining Rhombic plate form Double-sided chipbreaker Cylindrical hole for screw clamping FAQ What materials is this insert intended for? The Tungaloy DNMG150408 T505 insert is specified for economical machining of cast iron; the T505 grade with CVD coating is optimised for chip formation and tool life on such materials. How is the insert secured in the holder? The insert features a cylindrical hole and is clamped using standard screws; when paired with the correct DIN-compatible holder and clamping kit the DNMG150408 ensures secure positioning and repeatable accuracy. How many usable edges are available per insert? This rhombic, double-sided insert provides multiple usable cutting edges; the double-sided chipbreaker allows rotation to fresh edges, extending productive life before replacement. Which cutting geometry considerations are important for the DNMG150408? Key geometry data are the 55° cutting angle and 0° relief angle combined with a 0.8 mm corner radius; these parameters influence cutting forces, surface finish and edge strength during turning operations. Is the DNMG150408 T505 suitable for interrupted cuts? Yes, the T505 composition and chipbreaker design are selected to cope with interrupted and continuous cuts typical in cast-iron turning, though holder rigidity and cutting parameters must be adapted to the specific operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T505 Wendeplatten - Tungaloy
Take advantage of a proven CVD-coated carbide grade for economical cast-iron turning, combined with ISO-standard geometry for straightforward holder compatibility and consistent chip control — order through Metav Werkzeuge or consult our specialists for process matching. DNMG150408 T505 ISO turning insert for cast-iron machining by Tungaloy The DNMG150408 T505 is an ISO-standard, rhombic turning insert designed for efficient external and internal turning of cast iron using a CVD-coated carbide grade. CVD-coated carbide for cast iron machining ISO DNMG 150408 rhombic form for compatibility Double-sided chipbreaker for reliable chip control Cylindrical hole and secure clamping fit High productivity for cast-iron turning with durable coating The insert delivers economical machining thanks to the CVD-coated carbide grade T505, chosen for stable chip formation and extended tool life when turning cast iron. The coating supports elevated cutting speeds where the process stability allows, reducing downtime and part rework. This combination promotes a predictable cost-per-part and makes the insert suitable for production environments seeking reproducible throughput and lower tooling costs. Stable geometry and secure seating for consistent results The rhombic, ISO-standard DNMG geometry with a 55° approach angle provides a reliable cutting orientation that is widely compatible with standard external and internal holders. The insert features a cylindrical hole for positive seating and secure clamping, while the 0° rake helps withstand interrupted cuts and variable workpiece rigidity. Together, these attributes support steady surface finish and repeatable dimensional control in series production. Practical machining guidance and clear process benefits With a 0.8 mm radius and 4.76 mm thickness, the insert balances radiused edge strength and versatility for finishing to medium-turning passes. The double-sided chipbreaker enables two usable cutting faces, aiding cost-efficiency by extending service life before indexing. For system setup, pair the insert with the appropriate holder, underlay/clamp set and replacement screw; compatibility is determined by form, clearance angle, tolerance class, fastening style, size and thickness. If process parameters or stability change, select the chipbreaker and grade to match workpiece rigidity and required cutting speeds. For tailored advice on machining with Tungaloy CVD-coated DNMG150408 T505 inserts and immediate availability, contact Metav Werkzeuge at info@metav-werkezeuge.com or by phone at +49 2822 7131930 to discuss the optimal holder and cutting data settings for the application Technical data Article number: 6831309 SKU: 6831309-Tungaloy Manufacturer SKU: TUN6831309 Name: DNMG150408 T505 Tungaloy turning insert Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 15 mm Approach angle: 55° Rake angle: 0° Special features Coating/grade: T505 (CVD) Material: carbide Plate form: rhombic (DNMG) Hole style: cylindrical hole Chipbreaker: double-sided Application: turning, economical machining of cast iron System components: compatible holder, underlay/clamp set and replacement screws required FAQ Is this insert suitable for cast iron machining? Yes. The DNMG150408 T505 is specifically graded for the economical machining of cast iron using a CVD-coated carbide suited to stable chip formation. Which geometry and seating does the insert use? The insert is an ISO-standard DNMG150408 rhombic shape with a cylindrical hole for secure clamping and a 55° approach angle. How does the chipbreaker influence performance? The double-sided chipbreaker supports controlled chip formation and reliable evacuation, improving process stability and extending usable tool life between indexing operations. What measurable dimensions matter for holder compatibility? Key dimensions are the plate size (15 mm), plate thickness (4.76 mm) and corner radius (0.8 mm); compatibility also depends on form, clearance angle, tolerance class and fastening style. Can the insert be used for interrupted cuts? Yes. The 0° rake and robust CVD-coated carbide composition make the insert resilient in interrupted or less stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, precise 55° geometry, and a robust 0.8 mm corner radius for consistent high-speed turning performance. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. DNMG 150408 T5105 DNMG — Indexable insert for turning, Tungaloy A DNMG150408 T5105 indexable insert for demanding external and internal turning operations, designed for high-speed machining of cast iron under stable cutting conditions. CVD-coated carbide for high-speed cutting 55° rhombic geometry for versatile turning 0.8 mm corner radius for robust edge strength Double-sided insert with cylindrical hole Consistent high-speed performance through advanced grade design The T5105 grade is a CVD-coated carbide developed for high-speed machining of cast iron, offering superior wear resistance and long tool life under stable cutting conditions. The coating reduces flank wear and improves resistance to abrasive cast-iron constituents, which translates into longer uninterrupted cutting cycles and fewer tool changes. This results in a measurable increase in productivity on series production and maintenance of surface finish quality even at elevated cutting speeds. Geometry and form that enhance process stability A 55° rhombic geometry combined with a 0° clearance angle gives the insert versatility for both profiling and light shoulder turning while maintaining access in confined features. The 0.8 mm corner radius strengthens the cutting edge against edge chipping and improves load distribution in interrupted cuts. The double-sided design and cylindrical hole enable secure mounting and economical indexation, while compatibility with ISO-compliant external holders supports straightforward integration into existing tool systems. System-level benefits for reliable machining and predictable results Use of these inserts within a complete system — insert, matching external holder or boring bar, underlay/clamp set and replacement screws — ensures stable clamping and repeatable positioning, which are crucial for dimensional consistency and reproducible surface finish. The double-sided chipbreaker arrangement permits controlled chip formation when paired with an appropriate grade and cutting geometry, reducing the risk of chip entanglement and facilitating safe evacuation in automated setups. Specification-driven selection of holder and operating parameters makes this insert a practical choice for production environments seeking predictable cycle times and lower tool-change frequency. Contact Metav Werkzeuge for tailored application support and to source genuine Tungaloy DNMG150408 T5105 indexable inserts and compatible holders; technical advice and order handling are available from Metav Werkzeuge. Technical data Article number: 6850197 Manufacturer SKU: TUN6850197 Brand: Tungaloy Model series: ISO indexable turning inserts Designation: DNMG150408 T5105 Material: cemented carbide Coating: T5105 (CVD) Application: Turning Mounting: with cylindrical hole Facts Corner radius: 0.8 mm Thickness: 4.76 mm Size: 15 mm Geometry angle: 55° Clearance angle: 0° Special features Double-sided insert Rhombic plate form Cylindrical hole CVD-coated grade for cast iron Double-sided chipbreaker Compatible with ISO turning holders FAQ Which materials is this insert optimised for? The DNMG150408 T5105 insert is optimised for high-speed machining of cast iron, with a CVD-coated carbide grade that improves wear resistance and surface quality. Is the DNMG150408 compatible with standard holders? Yes, the insert follows ISO dimensions and is compatible with ISO-compliant external holders when the holder matches the plate form, size, thickness and tolerance class. What is the purpose of the 0.8 mm corner radius? The 0.8 mm corner radius increases edge strength and distributes cutting forces more evenly, reducing the likelihood of chipping in interrupted or heavy cuts. How does the T5105 coating benefit production runs? The T5105 CVD coating enhances abrasion resistance and flank wear performance, extending tool life and reducing downtime for tool changes during series production. Can the insert be indexed to use both sides? Yes, the insert is double-sided and can be indexed to present a fresh cutting edge, improving cost-efficiency per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T5105 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T5105 and the 0.8 mm corner radius to secure high-speed, stable machining of cast iron; order the insert directly via Metav Werkzeuge or ask our consultants for cutting parameters and holder compatibility. DNMG 150408 T5105 indexable turning insert by Tungaloy — rhombic ISO insert for turning The DNMG150408 T5105 is an ISO-standard rhombic indexable insert designed for external and internal turning, optimised for high-speed machining of cast iron under stable conditions. DNMG150408 ISO rhombic geometry, 55° included angle CVD-coated carbide grade T5105 for high-speed cast iron 0.8 mm corner radius for robust edge strength Cylindrical-hole, double-sided insert for stable clamping Consistent high-speed performance for cast iron The CVD-coated carbide substrate in grade T5105 delivers wear resistance tailored to high cutting speeds when machining cast iron. This combination reduces flank wear and helps retain a sharp cutting edge over longer tool life, leading to fewer insert changes and higher component throughput. The coating process creates a hard, heat-resistant layer; for users less familiar with coatings, this means better protection against abrasion and thermal degradation during continuous spindle operation. Reliable edge strength and chip control With a 0.8 mm corner radius and a double-sided chipbreaker, the insert provides a balance between edge robustness and controlled chip formation. The moderate radius increases edge life in interrupted cuts while the chipbreaker geometry supports predictable chip flow, lowering the risk of built-up edge and improving surface finish of turned components. These characteristics are particularly beneficial for medium to heavy cross-sections where stability is required. Simple integration with ISO toolholders and secure clamping The rhombic ISO-standard form, cylindrical hole, and 55° geometry make the insert compatible with a wide range of external holders and boring bars when the holder's form, clearance, tolerance class, fastening and thickness are matched. The double-sided design doubles the available cutting edges per insert, offering economical edge utilisation. For practical setup, confirm the holder accepts the 15 mm inscribed circle and 4.76 mm thickness to ensure correct seating and clamping. Process security and economical productivity Selecting this CVD-coated grade for stable turning operations supports reproducible results and reduced downtime. The wear-resistant material and robust geometry translate into predictable interchange intervals and consistent surface quality, which is essential for production lines aiming at repeatability and high uptime. For shops focused on efficiency, the insert’s design helps to maintain cycle times while reducing per-part tooling cost. For reliable high-speed cast-iron turning with proven process security, contact Metav Werkzeuge to reserve the Tungaloy DNMG150408 T5105 insert or to request tailored cutting data at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6850194 SKU: 6850194-Tungaloy Model series: ISO turning indexable inserts Name: DNMG150408 T5105 Tungaloy insert Core data Insert designation: DNMG150408 Grade: T5105 Material: carbide, CVD-coated Shape: rhombic, 55° included angle Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle: 15 mm Clearance angle: 0° Hole: with cylindrical hole Side: double-sided Chipbreaker: double-sided Special features Application: external and internal turning Optimised for high-speed machining of cast iron under stable conditions Compatibility determined by holder form, clearance angle, tolerance, fastening, size and thickness System components: ISO insert, matching external holder or boring bar, shim/clamping kit and replacement screws FAQ What materials is this insert best suited for? The DNMG150408 T5105 insert is engineered for cast iron machining, with the T5105 CVD-coated carbide grade providing high-speed wear resistance suitable for stable turning operations. Can the insert be used on internal bores as well as external turning? Yes. The rhombic form and double-sided design allow use in both external holders and compatible boring bars, provided the holder matches the insert’s dimensions and clamping style. How many cutting edges are available per insert? As a double-sided insert, the DNMG150408 T5105 offers multiple effective edges; rotating or indexing the insert extends total usable life compared with single-sided solutions. What does the 0° clearance angle mean in practice? A 0° clearance angle indicates a neutral relief suited to a variety of turning tasks; it promotes stable contact with the workpiece and, together with the 0.8 mm corner radius, supports robustness in interrupted cuts. Which holder details must be checked for compatibility? Verify holder form, clearance angle, tolerance class, fastening method, inscribed circle (15 mm) and plate thickness (4.76 mm) to ensure proper seating and clamping of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T5105 Wendeplatten - Tungaloy
Benefit from reliable high-speed performance and extended tool life provided by a CVD-coated carbide T5105 grade and a robust rhombic 55° geometry; the insert supports stable external and internal turning of cast iron. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG 150408 T5105 turning insert by Tungaloy — ISO indexable insert for turning A DNMG150408 T5105 indexable turning insert designed for high-speed machining of cast iron under stable cutting conditions, compatible with ISO holders when form, clearance and size match. DNMG ISO turning insert for stable high-speed turning CVD-coated carbide grade T5105 for wear resistance Rhombic 55° geometry with 0° clearance Double-sided chipbreaker, cylindrical hole for secure mounting Maximise productivity with consistent high-speed machining The rhombic 55° geometry combined with the CVD-coated T5105 carbide substrate delivers a balance of strength and edge stability, enabling higher cutting speeds on cast iron without compromising surface finish. In practice, the geometry reduces cutting forces during external and internal turning, while the double-sided chipbreaker ensures predictable chip control. This results in fewer interruptions for chip clearing and a smoother production flow, particularly on stable, well-supported workpieces. Extended tool life through advanced coating and material pairing The CVD coating applied to the wear-resistant carbide grade improves abrasion resistance and thermal stability during continuous cutting, which translates into longer intervals between index changes. For operations where long tool life reduces downtime and lowers total machining costs, the coated substrate provides demonstrable benefits in repeatability and consistent dimensional accuracy. For users less familiar with coatings: CVD-coated means a hard, wear-resistant layer deposited chemically, offering toughness at elevated temperatures typical of high-speed turning. Simple integration into existing ISO tool systems for predictable results The insert’s dimensions — size 15, thickness 4.76 mm and a nose radius of 0.8 mm — follow ISO standards for easy replacement and compatibility with matched holders and clamping sets. The cylindrical hole and standard mounting form aid secure clamping, ensuring the intended cutting geometry is preserved. Choosing a grade and chipbreaker that match the workpiece material and machining stability minimises trial-and-error setup and supports consistent part quality in serial production. For reliable high-speed cast iron turning with Tungaloy quality, contact Metav Werkzeuge for specialist advice or to place an order: info@metav-werkzeuge.com | +49 2822 7131930. Technical data Manufacturer item number: 6850192 SKU: 6850192-Tungaloy Manufacturer SKU: TUN6850192 Model series: ISO turning inserts Core dimensions Insert designation: DNMG150408 Inscribed circle / size: 15 mm Thickness: 4.76 mm Nose radius: 0.8 mm Included angle: 55° Clearance angle: 0° Special features Material: carbide Coating / grade: CVD-coated, T5105 Geometry: rhombic, double-sided Hole style: cylindrical hole Chipbreaker: double-sided Typical application: external and internal turning of cast iron Compatibility: ISO-standard insert, fits holders matching form, clearance and size FAQ Is this insert suitable for cast iron machining? The DNMG150408 T5105 indexable turning insert is specified for high-speed machining of cast iron; the T5105 grade and CVD coating are optimised for wear resistance in such applications. What are the key dimensions to check for holder compatibility? Check the insert size (15 mm inscribed circle), thickness (4.76 mm), nose radius (0.8 mm) and the rhombic form to ensure the insert fits the intended ISO holder. How does the CVD coating affect performance? The CVD coating on this grade provides enhanced abrasion resistance and thermal stability, extending tool life during continuous high-speed turning operations. Can the insert be used for both external and internal turning? Yes, the geometry and double-sided design make the insert suitable for both external and internal turning when the holder and setup provide adequate rigidity. How many cutting edges are available per indexable insert? This rhombic DNMG insert is double-sided, providing multiple usable edges before replacement is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T5105 Wendeplatten - Tungaloy
Taking advantage of the CVD‑coated carbide grade T5105 and the ISO‑standard DNMG150408 geometry, this insert delivers consistent high‑speed performance for cast iron turning while ensuring secure clamping and repeatable edge life; order through Metav Werkzeuge or consult the specialists for holder compatibility. DNMG150408 T5105 Indexable turning insert — CVD‑coated carbide, 0.8 mm corner radius (Tungaloy) The DNMG150408 T5105 is an ISO‑standard rhombic indexable insert designed for external and internal turning, optimised for high‑speed machining of cast iron and stable production environments CVD‑coated carbide grade T5105 for high speeds ISO rhombic DNMG 150408 geometry, 55° cutting edge 0.8 mm corner radius for reliable edge strength Double‑sided chipbreaker with cylindrical hole Productivity gains through high‑speed, wear‑resistant cutting The combination of a CVD‑coated finish and a wear‑resistant carbide substrate in grade T5105 is engineered for sustained performance in high‑speed turning of cast iron. The coating provides thermal and abrasive resistance, which reduces flank wear and extends tool life; this leads to shorter cycle times and fewer insert changes, directly improving shop throughput. In practical terms, shops benefit from fewer interruptions and more predictable tool costs when selecting a grade matched to both the workpiece and machining stability. Technical terms: CVD‑coated means a thin ceramic layer applied by chemical vapour deposition to improve surface hardness and heat resistance. Predictable geometry and secure clamping for consistent results The ISO rhombic DNMG150408 shape with a 55° included angle and a 0.8 mm corner radius delivers a balance between edge strength and finishing capability. The insert is double‑sided, offering two indexing positions to reduce cost per edge, and the cylindrical hole enables standard screw mounting with a shim or clamping set for repeatable seating. Compatibility with a holder depends on form, clearance/freiwinkel, tolerance class, attachment method, size and thickness; when matched correctly, the system ensures accurate runout control and consistent surface finish across batches. These geometric and clamping characteristics translate into fewer reworks and stable tolerances in production. System approach for reliable process integration An efficient cutting system comprises the insert, a suitable external holder or boring bar, a shim/clamping set and replacement screws. Choosing the correct chipbreaker and grade for the material, machining type and machine‑tool rigidity is decisive: the double‑sided chipbreaker on this insert assists chip control under stable conditions, improving evacuation and reducing the risk of built‑up edge. For operations aiming at repeatable component quality, the insert’s standardised form and clear specification help when planning tool inventories and spare part logistics. This contributes to lower total cost per part and enhanced process reliability. For tailored application advice or to secure Tungaloy DNMG150408 inserts for high‑speed cast iron turning, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — Metav Werkzeuge specialists advise on holder compatibility and supply. Technical Data Article number: 6852965 Manufacturer SKU: TUN6852965 SKU: 6852965-Tungaloy Model series: ISO‑Drehwendeschneidplatten Manufacturer: Tungaloy Facts Geometry designation: DNMG150408 ISO code: 150408 Corner radius: 0.8 mm Plate size (inscribed circle): 15 mm Plate thickness: 4.76 mm Clearance / relief angle: 0° Cutting angle: 55° Special features Material: carbide Coating / grade: CVD‑coated, T5105 Chipbreaker: double‑sided Hole style: cylindrical hole Plate form: rhombic Application: turning System components: insert, holder/boring bar, shim/clamping set, replacement screws FAQ What materials is this insert intended for? The DNMG150408 T5105 insert is designed primarily for high‑speed machining of cast iron; the CVD‑coated carbide composition targets abrasive, high‑temperature cutting conditions typical of cast iron turning. How does the T5105 grade improve tool life? Grade T5105 combines a wear‑resistant carbide substrate with a CVD‑coating that reduces abrasive wear and thermal damage, extending edge life for prolonged high‑speed operation with fewer indexings. Is the insert compatible with standard DNMG holders? Compatibility depends on holder form, clearance angle, tolerance class, attachment and plate thickness; the ISO‑standard DNMG150408 shape ensures fitment with holders specified for DNMG inserts when the holder parameters match. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius balances edge strength and surface finish, offering improved resistance to chipping while maintaining acceptable workpiece quality in general turning applications. How many cutting edges are available per insert? This insert is double‑sided, providing two usable cutting edges to reduce cost per edge and ease inventory management. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150408 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a universal grade for cast iron, and a double-sided chipbreaker to maintain consistent production quality and reduce tooling costs. Order the insert directly via Metav Werkzeuge or consult the team for compatibility support. DNMG150408 T5115 ISO turning insert for turning by Tungaloy The DNMG150408 T5115 is an ISO rhombic indexable insert engineered for external and internal turning, offering a balanced mix of wear resistance and cutting-edge stability for cast iron machining. CVD-coated carbide grade T5115 Universal for cast iron applications Rhombic 55° geometry Double-sided chipbreaker, cylindrical hole Consistent cutting performance with CVD-coated carbide The combination of a CVD-coated surface and a carbide substrate delivers predictable wear behaviour and a stable cutting edge, which translates into fewer tool changes and more reliable cycle times. The specified grade provides an advantageous balance between abrasion resistance and edge durability, making the insert particularly suitable for interrupted cuts and medium‑to‑high metal removal rates. By favouring consistent flank wear progression, this geometry supports repeatable part quality and reduces the risk of unexpected rejections in batch production. Geometry and clamping designed for versatile turning tasks A rhombic 55° geometry with a 0° clearance angle and a cylindrical hole ensures robust clamping and straightforward indexability in compatible holders. The double-sided chipbreaker permits two usable cutting edges per index, lowering cost per edge and simplifying inventory management. Compatibility with a holder is determined by form, relief angle, tolerance class, fixing method, size and thickness; the insert’s 15 mm size and 4.76 mm thickness match standard ISO configurations, easing retrofitting into established tool systems without extensive adapter work. Economical choice for cast iron with simple selection logic As a universal grade for cast iron, the T5115 designation allows flexible deployment across typical turning operations, from finishing to moderate roughing. The 0.8 mm corner radius offers a compromise between strength and surface finish, producing good surface integrity while maintaining edge robustness. Selecting a suitable chipbreaker and grade according to component material and machining stability pays off through longer edge life and reduced downtime. For production environments demanding steady throughput, this insert contributes to lower unit costs and predictable machining output. For product enquiries, compatibility checks or to place an order for the Tungaloy DNMG150408 T5115 insert, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, application-oriented advice. Technical data Article number: 6850195-Tungaloy Manufacturer SKU: TUN6850195 Manufacturer article number: 6850195 Material: Carbide Grade: T5115 Coating: CVD-coated Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Special features Rhombic insert shape Cylindrical hole for secure clamping Double-sided chipbreaker ISO designation DNMG150408 Suitable for external and internal turning of cast iron Series: ISO turning indexable inserts FAQ What materials is this insert suitable for? The DNMG150408 T5115 insert is formulated as a universal grade for cast iron, offering a balanced mix of wear resistance and edge stability for turning operations. How many cutting edges are available per insert? The insert features a double-sided chipbreaker, providing two usable cutting edges per side and thereby reducing cost per edge and simplifying inventory. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; the DNMG150408 conforms to ISO dimensions, easing integration with standard external and internal turning holders. What are the key geometry specifications to consider? Important specifications include the rhombic 55° geometry, 0° clearance angle, 15 mm nominal size, 4.76 mm thickness and a 0.8 mm corner radius—these determine cutting behaviour and clamping needs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T5115 Wendeplatten - Tungaloy
Benefit from the combination of robust edge stability, balanced wear resistance and ISO compatibility for dependable turning results. Order the DNMG150408 T5115 insert directly via Metav Werkzeuge or consult the technical team for precise application advice. DNMG150408 T5115 – Indexable turning insert, CVD-coated carbide by Tungaloy A DNMG150408 T5115 indexable turning insert engineered for efficient external and internal turning, optimised for machining cast iron with a balance of wear resistance and cutting-edge stability. DNMG geometry ISO 150408 format CVD-coated carbide for reliable wear resistance Rhombic 55° cutting angle, 0.8 mm corner radius Double-sided with cylindrical hole for secure clamping Durable coating and material for consistent performance The combination of an indexable insert design with CVD-coated carbide provides a dependable basis for repetitive turning operations. The CVD coating improves wear resistance on the cutting edge while the carbide substrate maintains cutting strength, which together reduce the need for frequent changes and support stable cycle times. Specified for cast iron, this grade delivers consistent tool life and helps maintain part tolerances under production conditions. The ISO-series geometry also simplifies tool selection and inventory management across compatible holders. Geometry and dimensions that ease process setup A rhombic plate form with a defined 55° approach angle and 0.8 mm corner radius offers a predictable cutting behaviour for turning tasks where a compromise between edge strength and detail is required. The 4.76 mm thickness and the 15 mm size provide mechanical rigidity and secure clamping via the cylindrical hole, reducing vibration and improving surface finish. The 0° relief angle is suited to specific turning set-ups where the holder geometry dictates the working clearance; selection of holder and clamping kit should follow the ISO parameters to ensure correct seating and repeatability. Application fit and practical advantages for workshop use Designed as a universal grade for cast iron, the T5115 specification balances wear resistance and edge stability to perform well across a range of finishing and semi-finishing operations. The double-sided nature of the insert extends usable life by allowing indexed repositioning, which supports cost-effective production and reduces downtime for tool change. For operations requiring straightforward insert handling and predictable chip formation, this plate form and chipbreaker arrangement contribute to smoother machining and more consistent part quality. Guidance for integration and process optimisation When integrating this insert into an existing turning cell, match the holder by form, tolerance class, fastening and thickness to the ISO-150408 standard to guarantee compatibility. Choice of chipbreaker and grade should reflect the workpiece material, machining strategy and machine rigidity; selecting a chip control geometry suited to the cast iron grade will enhance surface results and evacuation. For additional setup suggestions or cutting data, the technical advisors at Metav Werkzeuge can provide application-oriented recommendations tailored to the production context. Contact Metav Werkzeuge for personalised application advice on the Tungaloy CVD-coated DNMG150408 T5115 insert and to check holder compatibility and delivery options Technical data Article number: 6850193 Manufacturer SKU: TUN6850193 SKU: 6850193-Tungaloy Designation: DNMG150408 T5115 Core dimensions Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 0° Hole style: cylindrical hole Material & features Carbide, CVD coating Double-sided indexable geometry Rhombic plate form Suitable for turning, cast iron applications ISO series: ISO-150408 FAQ What materials is this insert best suited for? The DNMG150408 T5115 Tungaloy insert is specified as a universal grade for cast iron and is optimised to balance wear resistance with cutting-edge stability in turning operations. Which holders are compatible with this ISO insert? Compatibility depends on matching the ISO-150408 form factors: holder shape, fastening method, tolerance class, size and plate thickness. The insert seats in standard DNMG-compatible turning holders designed for ISO-150408 geometry. How does the CVD coating benefit machining? The CVD-coated carbide construction of the DNMG150408 T5115 insert improves wear resistance and helps maintain a stable cutting edge under continuous operation, extending usable life in many cast iron applications. Is the insert reversible and how many cutting edges are available? This insert is double-sided, allowing indexed use of multiple cutting edges; the reversible geometry effectively doubles the number of available edges compared with a single-sided plate. What should be considered when choosing the chipbreaker? Select a chipbreaker matched to the cast iron grade and the desired surface finish and chip control. The correct chipbreaker promotes consistent chip formation and supports process stability with the DNMG150408 T5115 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, a stable cutting edge, and ISO compatibility for productive turning. The combination of T5115 grade and a 55° rhombic geometry ensures consistent chip control and reliable tool life. Order the DNMG150408 T5115 insert directly via Metav Werkzeuge or consult Metav Werkzeuge’s technical advisers for application guidance. DNMG150408 T5115 ISO turning insert — CVD-coated carbide for cast-iron (Tungaloy) The DNMG150408 T5115 is a CVD-coated carbide turning insert designed for external and internal turning, optimised for cast-iron machining with a 55° rhombic geometry. CVD-coated carbide grade T5115 ISO-standard rhombic insert geometry Double-sided chipbreaker for stable cutting Cylindrical hole for secure clamping Productive turning for cast-iron components The combination of a CVD-coated carbide substrate and the T5115 grade provides a balanced mix of wear resistance and cutting-edge stability, designed specifically for machining cast iron. The coating reduces adhesion and flank wear, which translates into extended tool life and fewer indexings per component. For production environments where cycle time and repeatability matter, this insert supports higher cutting volumes without sacrificing surface finish. Geometry and clamping that improve process reliability A 55° rhombic plate form with a corner radius of 0.8 mm and a cylindrical locating hole allows reliable seating in ISO-compatible holders and repeatable positioning. The 0° relief angle and standard plate thickness of 4.76 mm contribute to stiffness and vibration damping, reducing edge chipping during interrupted cuts. Stable clamping and consistent geometry help maintain tolerances in series production and reduce scrap rates. Chip control and practical advantages on the shop floor The double-sided chipbreaker design supports predictable chip formation across a range of feeds and depths, simplifying process parameter selection. In combination with the universal T5115 grade, this results in fewer built-up edges when turning grey and nodular cast irons. The insert’s two usable cutting edges extend the service interval before replacement, improving overall tool utilisation in batch and continuous operations. Material and coating explained for informed selection The insert is made from carbide with a CVD coating, a proven combination for abrasive cast-iron alloys. CVD coatings form a hard surface layer that resists abrasive wear while preserving a robust cutting edge underneath; this balance is particularly beneficial when machining cast-iron components with varied microstructures. When selecting tooling for specific cast-iron grades, pairing the T5115 insert with a suitable holder and stable machine setup yields the best economy and surface quality. Contact Metav Werkzeuge for availability, cutting data recommendations and application-specific advice on Tungaloy T5115 turning inserts Technical data Article number: 6850198 Manufacturer SKU: TUN6850198 Product SKU: 6850198-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150408 T5115 Tungaloy-Wendeplatte Facts Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Main angle: 55° Hole: with hole (cylindrical) Special features Material: carbide Coating: CVD-coated Plate form: rhombic Chipbreaker: double-sided Application: external and internal turning Compatible with ISO-standard holders Universal grade for cast-iron machining FAQ What materials is this insert best suited for? The DNMG150408 T5115 insert is optimised for machining cast iron; the T5115 CVD-coated carbide provides wear resistance and edge stability for grey and nodular cast irons. How is the insert clamped and located in the holder? Clamping is achieved via the cylindrical locating hole and ISO-standard seat; the rhombic form and plate thickness ensure a secure, repeatable fit for ISO-compatible external and internal holders. How many cutting edges are available per insert? The insert features a double-sided chipbreaker and is indexable to provide multiple usable cutting edges, extending the service life before replacement. Which Tungaloy product code should be referenced when ordering? Order referencing article number 6850198 or manufacturer SKU TUN6850198 ensures the correct DNMG150408 T5115 Tungaloy insert is supplied. What benefits does the CVD coating deliver in production? The CVD-coated surface increases abrasive wear resistance while maintaining a robust cutting edge, reducing downtime and improving consistency in batch machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T5115 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide universal grade and a robust rhombic insert geometry for efficient, stable turning of cast iron; order directly via Metav Werkzeuge or consult our application experts for tailored recommendations. DNMG150408 T5115 indexable insert for turning — CVD-coated carbide, rhombic 55° (Tungaloy) The DNMG150408 T5115 is an ISO-standard indexable insert engineered for productive external and internal turning of cast iron components, offering a balance of wear resistance and edge stability for reliable workshop performance. CVD-coated carbide grade T5115 ISO rhombic DNMG 55° geometry Double-sided chipbreaker, cylindrical hole 0.8 mm corner radius for consistent finish High productivity through controlled chip formation The combination of a double-sided chipbreaker and a central cylindrical hole produces predictable chip flow and secure clamping, which contributes directly to cycle-time reductions on turning operations. The CVD-coated surface increases wear resistance of the carbide substrate, extending tool life under intermittent and continuous cuts. For machining cast iron, this universal grade offers an advantageous mix of stable cutting edge and abrasion resistance, reducing unexpected tool changes and supporting consistent production runs. Precise geometry for dependable fit and surface quality The rhombic insert with a 55° lead angle provides versatility for both external profiling and light internal turning while maintaining access in constrained geometries. The 0° relief angle and an insert thickness of 4.76 mm ensure stable seating in the pocket; the 0.8 mm corner radius supports a balance between edge strength and achievable surface finish. ISO compliance of the insert shape and hole pattern simplifies holder selection, but final compatibility depends on holder form, clamp type and tolerance class. Practical advice for selection and application Choose the chipbreaker and grade to match the workpiece material, stability of the setup and cutting parameters: the T5115 grade is optimised for cast iron and performs well where a blend of longevity and edge security is required. The complete system comprises the insert, a matched external holder or boring bar, a backing pad and suitable clamping screws; correct assembly and torque settings are essential to fully exploit the insert’s performance. If process stability is limited, prefer conservative depths of cut and incremental feeds to preserve the cutting edge. Contact Metav Werkzeuge for application advice on Tungaloy inserts and to arrange prompt supply or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6852966 Manufacturer SKU: TUN6852966 SKU: 6852966-Tungaloy ISO designation: DNMG150408 Facts Corner radius: 0.8 mm Relief angle: 0° Insert thickness: 4.76 mm Insert size: 15 mm Lead angle: 55° Special features Material: carbide Coating: CVD Grade: T5115 Shape: rhombic Hole: cylindrical, with hole Chipbreaker: double-sided Typical use: external and internal turning Model series: ISO turning indexable inserts FAQ What materials is this insert optimised for? The T5115 grade in the DNMG150408 insert is optimised for cast iron machining, combining abrasion resistance with edge stability for consistent results. Can this insert be used for internal turning as well as external turning? Yes, the rhombic 55° geometry and double-sided design allow use in both external and light internal turning applications when paired with an appropriate holder. How does the CVD coating benefit production? A CVD-coated surface on the carbide substrate increases wear resistance under abrasive cutting conditions, which helps the insert maintain performance over longer tool life and supports uninterrupted production. What determines compatibility with a holder? Compatibility is set by insert form, relief angle, tolerance class, fixing method, size and thickness; confirm these dimensions against the chosen holder before use. Is the insert reversible and how many cutting edges are available? The double-sided format provides multiple cutting edges per indexable insert; turning the component to the next edge restores cutting geometry without regrinding. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T5125 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide T5125 grade, ISO DNMG150408 geometry and a 0° clearance delivers reliable performance for external and internal turning, especially in interrupted cuts on cast iron; order the DNMG150408 T5125 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408 T5125 turning insert — Tungaloy (CVD-coated carbide, 0° clearance) The DNMG150408 T5125 Tungaloy insert is an ISO-standard, rhombic, double-sided indexable insert designed for turning applications, optimised for cast iron and interrupted cutting conditions. ISO DNMG150408 geometry, rhombic insert CVD-coated carbide, grade T5125 0° clearance angle, 0.8 mm corner radius Double-sided with cylindrical hole for secure clamping Increased machining reliability through a tough CVD-coated grade The CVD-coated carbide of the T5125 grade provides a tougher cutting edge that copes better with interrupted cuts and less stable setups. This material combination improves edge stability and reduces the risk of chipping when machining cast iron or similar materials, which in turn supports longer tool life and fewer part reworks. The cartridge-style wear behaviour typical of CVD coatings also makes performance more predictable, allowing planners to estimate tool-change intervals more reliably and optimise production flow. Consistent clamping and repeatability for accurate turning A secure clamping system is essential for repeatable results; the double-sided design with a cylindrical hole gives stable locating and fast indexability while maintaining the correct seat geometry. The ISO-standard form means compatibility with a wide range of external holders and boring bars, where fit depends on form, clearance, tolerance class, fixation method, size and thickness. The 0° clearance and 0.8 mm corner radius contribute to controlled chip formation and a consistent machined profile, reducing setup iteration and improving first-pass quality. Application fit and economical advantages in series production The rhombic indexable insert with a 4.76 mm thickness and 15 mm inscribed circle is suitable for both external and internal turning when paired with an appropriate holder and chipbreaker. Choosing the double-sided chipbreaker and the T5125 grade matches the insert to workpiece stability and the required surface finish, yielding lower cost per edge through multiple reuses and reduced downtime. Where interrupted cuts or unstable clamping are expected, this combination often leads to fewer rejects and a shorter payback period on tooling investment. Contact Metav Werkzeuge for application consultancy and parts availability; reach out via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852967 Manufacturer SKU: TUN6852967 Internal SKU: 6852967-Tungaloy Article name: DNMG150408 T5125 Tungaloy insert Model series: ISO indexable turning inserts Facts Inscribed circle / size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Geometry angle: 55° Special features CVD-coated carbide (grade T5125) Carbide material Rhombic plate form, ISO DNMG150408 Double-sided with cylindrical hole Double-sided chipbreaker Suitable for turning and interrupted cuts Compatibility depends on holder form, clearance, tolerance, fixation, size and thickness FAQ Which materials is this insert best suited for? The DNMG150408 T5125 insert from Tungaloy is optimised for cast iron applications and performs particularly well in interrupted cuts or less stable machining conditions, thanks to the tougher T5125 grade. What does the T5125 designation indicate? T5125 denotes a CVD-coated carbide grade engineered for toughness and reliable edge stability; in practice, the T5125 grade balances wear resistance with chipping resistance when machining cast iron. How does the insert secure to the holder? The insert features a cylindrical hole and an ISO-compliant seat that enable secure clamping and straightforward indexing when mounted in compatible external holders or boring bars. What influence does the 0.8 mm corner radius have? The 0.8 mm corner radius provides a compromise between edge strength and surface finish, offering increased robustness compared with very small radii while still delivering a controlled surface profile on turned parts. Is the insert reversible and economical for batch work? Yes; the double-sided design allows multiple indexings before disposal, which extends usable life per insert and reduces tooling cost per component in serial production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T5125 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade designed for demanding turning and the ISO-standard DNMG geometry for predictable holder compatibility; this yields reliable chip control in interrupted cuts and straightforward re-indexing for productive machining. Order the insert directly via Metav Werkzeuge or consult the team for application advice. DNMG150408 T5125 turning insert — Tungaloy A DNMG150408 T5125 indexable turning insert engineered for stable performance in turning operations, particularly where interrupted cuts or less rigid setups challenge tool life. CVD-coated carbide for durable cutting edges ISO-standard DNMG geometry for holder compatibility Double-sided chipbreaker for economical re-indexing Rhombic plate, 55° included angle for stable turning Consistent chip control in interrupted turning The combination of a CVD-coated surface and the T5125 grade carbide gives the insert predictable wear behaviour when machining less stable workpieces. The coating, applied via chemical vapour deposition, improves resistance to abrasive wear and helps conserve the sharpness of the cutting edge under cyclic loading. For operations involving cast components or interrupted cuts, this specification promotes longer productive life per edge and reduces unplanned tool changes, delivering a measurable effect on process efficiency and uptime. Predictable fit and straightforward holder selection Conformity to ISO geometry ensures that the insert fits a broad range of standard DNMG holders provided the form, clearance, tolerance class, clamping and thickness are matched. The 0° clearance geometry is a critical parameter when selecting a compatible holder; verifying thickness and seat fit prevents runout and secures repeatable positioning. This standardisation simplifies procurement and machine setup, lowering the risk of incompatibility and shortening setup time between jobs. Design choices that raise productivity The rhombic plate with a 55° included angle combines accessibility for turning profiles with robust edge support. A double-sided chipbreaker and a cylindrical hole enable secure clamping and cost-effective re-indexing, effectively doubling available edges when appropriate. With a plate thickness of 4.76 mm and a corner radius of 0.8 mm, the geometry balances edge strength and the ability to produce acceptable surface finishes, particularly on cast iron components where stable cut control is essential. Material range and recommended system setup Specified for general turning applications, this indexable insert suits both external and internal operations when paired with the correct holder and clamping components. The product performs especially well in machining cast iron under interrupted conditions but will succeed across a range of workpiece materials when the chipbreaker and grade are matched to the application. A complete machining system normally comprises the insert, a compatible external holder or boring bar, a shim or clamp set and suitable fastening screws to ensure consistent clamping force and minimal vibration. For tailored recommendations and availability of the Tungaloy T5125 DNMG150408 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850199 Manufacturer SKU: TUN6850199 Model series: ISO turning indexable inserts Material: Carbide Grade/coating: T5125, CVD-coated Facts Included angle: 55° Thickness: 4.76 mm Plate size: 15 mm Corner radius: 0.8 mm Clearance angle: 0° Special features Rhombic plate shape Cylindrical hole for secure clamping Double-sided chipbreaker ISO DNMG150408 geometry Suited for turning; recommended for cast iron under interrupted cuts System composition: indexable insert, compatible holder/boring bar, shim/clamp set, spare screws FAQ Which materials is this insert best suited for? The DNMG150408 T5125 insert from Tungaloy is optimised for cast iron in interrupted cuts and performs well on related materials when paired with an appropriate chipbreaker and holder. Is the insert reversible or single-use per edge? The insert features a double-sided chipbreaker and is reversible, allowing both faces to be indexed to extend usable life and reduce tooling costs. How is compatibility with holders ensured? Compatibility depends on ISO DNMG geometry: match form, tolerance class, clamping type, plate size and thickness to the holder; the DNMG150408 form is designed for standard ISO holders. Can this insert be used for internal turning or boring operations? Yes, when mounted in a suitable boring bar or internal holder, the insert functions for internal turning; selection of the correct holder ensures rigidity and correct orientation. What system components are required to start machining? A complete setup comprises the indexable insert itself, a compatible external holder or boring bar, a shim or clamp set and the correct fastening screws to secure the insert and maintain repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a double-sided chipbreaker for stable cutting, and ISO compatibility to keep turning operations productive and reliable. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. DNMG150408 T5125 turning insert — CVD-coated carbide, 0.8 mm radius, for turning · Tungaloy The DNMG150408 T5125 is an ISO-standard turning insert designed for external and internal turning, optimised for cast iron machining and interrupted cuts, with a rhombic form and a cylindrical hole for secure mounting. CVD-coated carbide grade T5125 Optimised for cast iron machining Double-sided chipbreaker for stability Rhombic ISO insert 15 mm, 0.8 mm radius Consistent performance under interrupted cuts and unstable setups The CVD-coated carbide grade T5125 is formulated as a tougher CVD-coated carbide to resist chipping during intermittent engagement and less rigid setups. That makes it well suited to applications with workpiece irregularities or interrupted cuts in cast iron. The result is longer tool life and fewer unplanned indexings, which supports continuous machining and reduces downtime. Stable cutting geometry for surface quality and repeatability A double-sided chipbreaker combined with a 0.8 mm corner radius and rhombic shape provides a predictable chip flow and reduced vibration when turning. The 4.76 mm thickness and 0° rake angle contribute to a rigid cutting edge that produces a consistent surface finish and dimensional repeatability across batches. For operations where stability and finish matter, this geometry reduces the need for secondary operations. Easy integration into ISO tooling systems and clear handling benefits As an ISO turning insert, compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness; the cylindrical-hole design and standard dimensions simplify selection of matching external holders or boring bars. Typical system components include a compatible holder, a shim or clamping set, and replacement screws. This standardisation shortens setup time and helps maintain process reliability when changing inserts or retooling production. Contact Metav Werkzeuge for tailored machining advice on the Tungaloy DNMG150408 T5125 insert — our consultants provide application assessments and cutting data via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6850196 Manufacturer SKU: TUN6850196 Dealer SKU: 6850196-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Facts Insert designation: DNMG150408 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief/rake angle: 0° Approach/wedge angle: 55° Hole: with cylindrical hole Special features CVD-coated carbide (T5125) Rhombic shape Double-sided chipbreaker Carbide material ISO-standardised turning insert FAQ What materials is this insert best suited for? The DNMG150408 T5125 insert is optimised for cast iron and performs reliably in interrupted cuts thanks to the tougher T5125 carbide grade. Can the insert be used for external and internal turning? Yes, the rhombic form and ISO standard make the insert suitable for both external and internal turning operations when paired with a compatible holder. How does the chipbreaker affect machining? The double-sided chipbreaker on this insert ensures controlled chip formation and improved stability, which helps maintain surface quality and reduce chatter. What does the 0.8 mm radius mean for cutting results? A 0.8 mm corner radius provides a balance between edge strength and the achievable surface finish; it is robust enough for interrupted cuts while still delivering acceptable finish in many turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T515 Wendeplatten - Tungaloy
DNMG 150408 T515 Wendeplatte – Drehen | Tungaloy DNMG 150408 T515 Wendeplatte für wirtschaftliche Gussbearbeitung; ISO-genormte Ausführung für präzisen und zuverlässigen Einsatz beim Außen- und Innendrehen ISO-genormt für einfache Halterkompatibilität CVD-beschichtetes Hartmetall für Gusseisenbearbeitung Doppelseitiger Spanbrecher für lange Nutzungszyklen Zylindrisches Loch für sichere Befestigung Eckenradius 0,8 mm für konstante Oberflächengüte Wirtschaftliche Zerspanung durch CVD-Technologie Die CVD-beschichtete Sorte T515 kombiniert eine robuste Trägerlegierung mit einer verschleißfesten Beschichtung, die speziell für die wirtschaftliche Bearbeitung von Gusseisen ausgelegt ist. Durch die optimierte Schichtdicke und die stabile Schneidkante reduziert sich der Werkzeugverschleiß, was zu längeren Standzeiten und niedrigeren Stückkosten führt. Anwender profitieren von gleichmäßiger Spanbildung und planbarer Austauschintervalle. Normgerechte Passform und sichere Spannlösung Die ISO-genormte Geometrie gewährleistet Austauschbarkeit und einfache Lagerhaltung. Das zylindrische Loch erlaubt eine reproduzierbare Spannlage auf standardisierten Außenhaltern oder Bohrstangen, die Form und Freiwinkel (0°) berücksichtigen. Der Schnittwinkel von 55° sorgt für gute Schnittkräfte und kontrollierte Spanabfuhr, sodass die Platte in verschiedenen Aufspannungen zuverlässig arbeitet. Vielseitigkeit durch Plattendesign und Spanformer Die rhombische Plattenform mit 4,76 mm Plattendicke und doppelseitigem Spanbrecher ermöglicht kosteneffizienten Einsatz: Beide Seiten sind nutzbar, was die Kosten pro Schneide reduziert. Der Eckenradius von 0,8 mm liefert wiederholbare Oberflächenqualitäten bei Außen- und Innendrehoperationen. Die Kombination aus Geometrie und Spanformer unterstützt auch schwerere Schnittbedingungen und unterbrochene Schnitte. Zuverlässigkeit im Produktionsalltag Das Grundmaterial Hartmetall bietet hohe Biege- und Druckfestigkeit, wodurch die Platte stabile Schneidkantenhaltung und konstante Ergebnisse erzielt. In Serienfertigung sorgt die Sorte T515 für reproduzierbare Oberflächen und stabile Prozessfenster. Bei Unsicherheiten zur Halterkompatibilität oder zur optimalen Spanbrecherwahl steht technische Beratung zur Verfügung, damit die Fertigungsleistung langfristig gesichert wird. Empfehlung: Für wirtschaftliche Gussbearbeitung die Tungaloy T515 wählen und technische Beratung per eMail an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfordern Produktmerkmale Artikelnummer: 6793691 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten SKU: 6793691-Tungaloy Daten Eckenradius: 0,8 mm Winkel: 55° Plattendicke: 4,76 mm Plattengröße: 15 mm FreiWinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (Chemical Vapour Deposition) Sorte: T515 Spanbrecher: doppelseitig Loch: mit Loch (zylindrisches Loch) Plattenform: rhombisch Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten Einsatz der Sorte: wirtschaftliche Bearbeitung von Gusseisen FAQ Wie erkenne ich die Halterkompatibilität der Platte? Die Halterkompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; die DNMG 150408 T515 Wendeplatte passt auf standardisierte ISO-Außenhalter, die für DNMG-Formen ausgelegt sind. Für welche Werkstoffe ist die Sorte T515 geeignet? Die T515 Sorte ist speziell für die wirtschaftliche Bearbeitung von Gusseisen formuliert und bietet optimierte Spanbildung sowie verlängerte Standzeit bei Gusswerkstoffen. Kann die Platte bei unterbrochenen Schnitten eingesetzt werden? Ja, die Kombination aus robustem Hartmetallträger und CVD-Beschichtung der DNMG-Platte ermöglicht den Einsatz auch bei mittelschweren Unterbrechungen, sofern passende Schnittparameter gewählt werden. Wie viel nutzt der doppelseitige Spanbrecher für die Wirtschaftlichkeit? Der doppelseitige Spanbrecher verdoppelt effektiv die nutzbare Schneidkante, reduziert Werkzeugkosten pro bearbeitetem Bauteil und vereinfacht Ersatzteilmanagement. Welche Rolle spielt der Eckenradius 0,8 mm für die Oberflächenqualität? Der Eckenradius von 0,8 mm sorgt für stabile Schneidkanten und gleichmäßige Kraftverteilung, was zu konstanteren Oberflächengüten und erhöhten Toleranzstabilitäten führt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 150408 T515 Wendeplatten - Tungaloy
Take advantage of the combination of economical performance, dependable T515 cutting grade and CVD-coated carbide for efficient cast iron turning; compatibility with ISO holders ensures straightforward integration into existing toolsets. Order the DNMG150408 T515 Tungaloy insert directly via Metav Werkzeuge or ask the consultants for assistance. DNMG 150408 T515 — Turning insert DNMG for economical cast-iron machining (Tungaloy) A DNMG150408 T515 indexable turning insert designed for ISO-standard holders, optimised for economical external and internal turning of cast iron components. ISO rhombic DNMG geometry 55° cutting angle CVD-coated carbide grade T515 for cast iron Double-sided insert with cylindrical hole 0.8 mm corner radius for stable finish Productivity gains through targeted grade and coating The combination of a CVD-coated carbide substrate and the T515 grade delivers a balance of tool life and cutting speed that favours cost-effective production. The coating reduces flank wear under interrupted cuts and maintains a stable cutting edge, while the carbide core retains toughness for moderate depths of cut. For workshop planning, this means fewer index changes and longer cycles between tool replacements, supporting continuous machining processes and predictable throughput. Designed for secure mounting and versatile integration Built to ISO dimensions, the rhombic DNMG shape and the cylindrical hole enable secure clamping in a broad range of external holders and boring bars. Compatibility is determined by holder form, relief angle, tolerance class, clamping method, size and thickness, so the insert integrates into standard tool systems without custom adapters. The 0° relief angle and the 55° cutting geometry provide a predictable tool orientation that supports repeatable set-up and simpler tool management across multiple machines. Optimised for cast iron with a double-sided chipbreaker The insert’s double-sided chipbreaker and application-oriented grade make it particularly suited to cast iron turning, where chip control and edge stability are critical. The chipformer manages swarf into controllable segments, reducing the risk of tangling during high-volume turning. This focused design choice results in safer operation and a cleaner work area, while the insert’s geometry contributes to consistent surface integrity on machined cast-iron parts. Robust corner radius and finish consistency A 0.8 mm corner radius offers a compromise between edge strength and surface finish, lending the cutting edge additional resilience against edge chipping while still achieving a fine finish on workpieces. This radius supports moderate feeds without sacrificing component quality, which is advantageous for batch production where dimensional consistency and repeatable surface characteristics are required. The double-sided format also aids economical use of the insert’s available cutting edges. For practical advice on integrating Tungaloy DNMG150408 T515 inserts into production, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6745200 SKU: 6745200-Tungaloy Manufacturer SKU: TUN6745200 Model series: ISO-Drehwendeschneidplatten Designation: DNMG150408 T515 Tungaloy-Wendeplatte Facts Cutting angle: 55° Relief angle: 0° Corner radius: 0.8 mm Plate thickness: 4.76 mm Inscribed circle / size: 15 mm Special features CVD-coated carbide Grade T515 Double-sided chipbreaker Rhombic insert shape Cylindrical hole ISO-standard indexable turning insert Application: turning (external and internal) Optimised for economical cast iron machining FAQ Is the insert compatible with standard DNMG holders? The DNMG150408 T515 is an ISO-standard rhombic insert; compatibility with DNMG holders depends on matching form, relief angle, tolerance class, clamping and the insert’s size and thickness. Which materials is this insert best suited for? This cutting grade and chipbreaker are optimised for cast iron machining; the T515 grade and CVD coating support economical and reliable performance on grey and nodular cast irons. How does the double-sided design affect edge usage? The double-sided construction provides additional usable cutting edges; the insert can be rotated or flipped to exploit remaining edges, improving cost efficiency per insert. What role does the 0.8 mm corner radius play in machining? A 0.8 mm corner radius increases edge robustness and contributes to a consistent surface finish, balancing strength and finish quality for medium-feed turning operations. Is the DNMG150408 suitable for interrupted cuts or unstable set-ups? The CVD-coated carbide and the chosen grade are intended to improve edge stability under varying conditions; for interrupted cuts, selecting appropriate depths of cut and feed rates together with the right holder rigidity is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T515 Wendeplatten - Tungaloy
Benefit from economical machining and reliable chip control thanks to the CVD-coated T515 grade and the robust carbide substrate; the double-sided design reduces cost per cutting edge while preserving consistent performance. Order the insert directly via Metav Werkzeuge or consult their specialists for compatibility and application advice. DNMG 150408 T515 turning insert — Tungaloy The DNMG150408 T515 Tungaloy insert is an ISO-standard indexable turning insert engineered for efficient, economical machining of cast iron in both external and internal turning operations. CVD-coated T515 for cast iron Rhombic 55° geometry for stable cutting Double-sided chipbreaker with cylindrical hole 0.8 mm corner radius and 4.76 mm thickness Productive turning for cast iron components The combination of a CVD coating and a wear-resistant carbide substrate delivers stable performance when machining cast iron, where controlled chip formation is essential. The T515 grade is tuned for cost-effective cycles, providing a balance between tool life and cutting speed that supports efficient batch and serial production. By selecting the appropriate chipbreaker and cutting parameters, machinists can reduce downtime and improve surface consistency without sacrificing productivity. Geometry that ensures repeatable results The rhombic 55° geometry and the ISO-standard form allow predictable engagement with a wide range of holders; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. The 0° clearance and the standardised shape contribute to consistent cutting forces and straightforward tool setup, which simplifies process planning and reduces the need for frequent re‑adjustment when changing inserts. Durability and economical edge usage A double-sided design provides two usable cutting edges per face, halving the cost per edge compared with single-sided inserts. The CVD-coated T515 finish improves resistance against abrasive wear typical of cast-iron machining, extending intervals between indexings. For operations with intermittent cuts or varying stability, the robust coating and substrate combination supports repeatable performance across shifts and job changes. Practical integration into standard tooling systems The insert is supplied with a cylindrical hole, enabling secure clamping with common screw and clamp systems; thickness of 4.76 mm and a 15 mm inscribed circle suit many ISO holders. The 0.8 mm corner radius provides a compromise between edge strength and achievable surface finish, useful for applications that require both durability and acceptable geometry of the turned profile. The ISO-series architecture means the item integrates into established tool assemblies—insert, appropriate external holder or boring bar, and shim/clamp—so workshop implementation is straightforward. For reliable, high‑throughput cast iron turning using the Tungaloy T515 grade, contact Metav Werkzeuge for ordering and tailored technical advice — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6754109-Tungaloy Manufacturer article number: 6754109 Manufacturer SKU: TUN6754109 Model series: ISO-Drehwendeschneidplatten Designation: DNMG150408 T515 Tungaloy-Wendeplatte Material: Carbide Facts Geometry: rhombic, 55° Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle: 15 mm Clearance angle: 0° Hole: with cylindrical hole Special features Grade: T515 Coating: CVD-coated Chipbreaker: double-sided Application: Turning (external and internal) ISO-standard indexable insert Suitable for cast iron machining FAQ What materials is this insert suitable for? The DNMG150408 T515 insert by Tungaloy is designed primarily for cast iron machining, with the CVD-coated T515 grade optimised for economic performance on these materials. How does the double-sided design affect cost-efficiency? Because the insert is double-sided, each indexable face offers multiple cutting edges; this reduces cost per edge and improves the overall economy of using the Tungaloy carbide insert (SKU 6754109-Tungaloy). Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance, tolerance class, fastening and thickness; the DNMG150408 conforms to ISO geometry and fits standard external holders and boring bars designed for rhombic 55° inserts. Can this insert be used for interrupted cuts? Yes, the robust carbide substrate and CVD coating of the T515 grade make the insert suitable for applications with intermittent cuts, though selection of chipbreaker and cutting parameters should reflect stability and severity of interruption. What are the key dimensional features to check when replacing inserts? Check the inscribed circle (15 mm), thickness (4.76 mm), corner radius (0.8 mm) and hole style (cylindrical) to ensure proper fit and clamping in the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T515 Wendeplatten - Tungaloy
Combining an economical CVD-coated carbide T515 grade with a 0.8 mm nose radius and a 55° cutting geometry delivers reliable, cost-effective cast-iron turning and stable chip control; order supply or request application advice directly via Metav Werkzeuge. DNMG150408 T515 — Tungaloy ISO turning insert DNMG 150408 T515 for turning, 55° geometry The DNMG150408 T515 is an ISO-standard rhombic indexable insert designed for productive external and internal turning, optimised for economical cast-iron machining. DNMG150408 ISO rhombic insert CVD-coated carbide T515 grade Optimised for cast-iron machining Double-sided chipbreaker, cylindrical hole Stable, economical performance for cast-iron turning The combination of a CVD-coated surface and a T515 carbide grade is aimed at delivering consistent chip formation and extended tool life when machining cast iron. The coating enhances wear resistance at higher cutting speeds while the substrate provides toughness for interrupted cuts. These attributes translate into lower machining costs per component and fewer insert changes, improving throughput and overall process economy when the machining setup is stable and cutting parameters are chosen to match the workpiece and rigidity. Compatibility and secure clamping for fast setup The insert conforms to ISO geometry and its compatibility with a holder is governed by form, clearance angle 0°, tolerance class, mounting method, size and thickness. The system build typically comprises the ISO turning insert, an appropriate external holder or boring bar, a shim/clamp set and replacement screws, enabling quick replacement and repeatable positioning. The cylindrical hole and secure fixation reduce vibration and help achieve reproducible results, shortening setup time and simplifying tool management in a production environment. Practical machining advantages and application guidance A 0.8 mm nose radius is a balanced choice for a mix of surface finish and edge strength: small enough for fine contours yet large enough to avoid premature edge chipping under moderate feed rates. The 4.76 mm plate thickness and double-sided chipbreaker provide two usable cutting edges per index, improving cost-efficiency. The rhombic shape with its 55° approach angle supports general-purpose external and internal turning; select the chipbreaker and grade according to workpiece stability and desired cutting speed to achieve the best combination of productivity and surface quality. For economical and reliable cast-iron turning with Tungaloy’s T515 grade, contact Metav Werkzeuge for supply and tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6733826 Manufacturer SKU: TUN6733826 Label: DNMG150408 T515 Tungaloy turning insert Model series: ISO-Drehwendeschneidplatten Material: Carbide Core technical data Nose radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Special features CVD-coated carbide, grade T515 Intended for cast-iron machining Rhombic plate form, double-sided chipbreaker With cylindrical hole for secure clamping Suitable for external and internal turning; system includes holder, shim/clamp and screws FAQ What materials is this insert intended for? The DNMG150408 T515 insert is specified for economical machining of cast iron; the T515 grade and the CVD-coated carbide substrate are matched to deliver stable chip control in these applications. How does the 0.8 mm nose radius affect performance? A 0.8 mm radius balances surface finish and edge strength, allowing the insert to produce acceptable finishes while resisting edge chipping during moderate machining and interrupted cuts. Is the insert compatible with standard ISO holders? Compatibility is determined by form, clearance angle, tolerance class, mounting and size; the insert follows ISO geometry and is intended for use with matching external holders or boring bars plus the appropriate shim/clamp set. How many cutting edges are available per insert? The insert features a double-sided chipbreaker, providing two usable cutting edges to improve tool economy and reduce replacement frequency. Which features improve clamping stability? The cylindrical hole and the standardised form support secure clamping in the pocket, reducing vibration and ensuring repeatable positioning during production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T515 Wendeplatten - Tungaloy
The DNMG150408 T515 indexable insert combines CVD-coated carbide with a double-sided chipbreaker to deliver efficient, economical machining of cast iron; its ISO rhombic geometry and 55° cutting angle ensure predictable tool life and consistent surface finish. Order the insert directly via Metav Werkzeuge or consult the technical team for compatibility and application advice. DNMG 150408 T515 Turning Insert — Tungaloy The DNMG150408 T515 is an ISO-standard rhombic turning insert designed for economical external and internal turning of cast iron with a focus on stable chip control and reproducible results. ISO rhombic insert, 55° cutting angle CVD-coated carbide grade T515 Double-sided chipbreaker for cast iron Cylindrical hole for secure clamping Consistent results for cast iron production The rhombic geometry with a 55° cutting angle provides a stable engagement in turning operations, which reduces vibration and improves dimensional repeatability. The CVD coating on the carbide substrate increases wear resistance and supports higher cutting speeds compared with uncoated grades, making this insert suitable for productive, cost-conscious machining of cast iron components. Engineers benefit from predictable tool life and a steady surface finish without frequent tool changes. Geometry and clamping that improve process security A cylindrical hole and standard ISO form ensure compatibility with a wide range of holders when form, clearance angle, tolerance class, fastening method, size and thickness match. The rhombic shape gives flexibility for both external and internal turning, while the 0.8 mm corner radius helps maintain edge strength under interrupted cuts. These design choices reduce the need for trial-and-error setup and support consistent cycle times on batch production. Coating and grade engineered for economy The T515 grade is a CVD-coated carbide developed for the economic machining of cast iron; the coating improves thermal and abrasive resistance which in turn extends the interval between indexings. A double-sided chipbreaker improves fragmentation of brittle chips typical of cast iron, lowering the risk of chip-related damage and facilitating automated material removal. The result is a measurable improvement in throughput and lower per-part tooling cost. Practical handling and inventory benefits With a plate thickness of 4.76 mm and ISO sizing, stock management is simplified and compatibility across toolholders is straightforward when the holder matches the plate dimensions and tolerance class. The insert is indexed to present fresh cutting edges quickly, minimising downtime during production. Clear labelling and a consistent grade designation support rapid selection for changing production demands. For technical advice or to order the DNMG150408 T515 from Metav Werkzeuge, contact Metav Werkzeuge GmbH via eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants provide application support and compatibility checks. Technical Data Article number: 6741156 Manufacturer SKU: TUN6741156 SKU: 6741156-Tungaloy Designation: DNMG150408 T515 Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Special features CVD-coated carbide, grade T515 Double-sided chipbreaker Rhombic plate with cylindrical hole ISO-standard turning insert FAQ What materials is this insert intended for? The DNMG150408 T515 is specified for the economical machining of cast iron, with the CVD-coated carbide grade T515 optimised for that material class. Is the insert compatible with standard ISO holders? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; when those parameters match, the DNMG150408 T515 fits ISO-standard holders. What advantage does the double-sided chipbreaker provide? The double-sided chipbreaker on this insert improves chip control for brittle materials such as cast iron, helping to reduce chip entanglement and improve process stability. Which product codes identify this item for ordering? Order using article number 6741156 or manufacturer SKU TUN6741156 for the DNMG150408 T515 indexable insert from Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T515 Wendeplatten - Tungaloy
Reliable compatibility with ISO holders, economical performance on cast iron and robust CVD-coated carbide make this insert a practical choice for productive turning operations; order the DNMG150408 T515 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application matching and tool pairing. DNMG150408 T515 — Tungaloy indexable insert for turning, CVD-coated carbide, 55° The DNMG150408 T515 Tungaloy insert is an ISO-compliant, rhomboid indexable insert designed for efficient external and internal turning of cast iron components. CVD-coated carbide for long life Optimised for cast iron machining Double-sided chipbreaker design Rhomboid 55° geometry for versatile turning Cylindrical hole for secure clamping Productivity gains through a wear-resistant cutting grade The combination of a CVD-coated carbide substrate and the economic T515 grade is aimed at maximising tool life while maintaining stable cutting conditions when machining cast iron. This delivers measurable improvements in cycle time and downtime reduction, as the wear behaviour is controlled and predictable. The choice of a robust, coated cemented carbide helps to reduce the frequency of insert changes and supports higher average material removal rates without sacrificing surface quality. Secure clamping and ISO compatibility for predictable set-up Thanks to the ISO-compliant geometry and a cylindrical hole for fixation, the insert integrates cleanly into standard turning toolholders; compatibility depends on form, clearance angle, tolerance class, attachment method, size and thickness. The rhomboid shape with a 55° approach angle and a plate thickness of 4.76 mm ensures a stable seat and repeatable positioning, which is essential for batch production or serial workflows where consistent results are required. Improved chip control and versatile cutting performance The double-sided chipbreaker arrangement contributes to controlled chip formation across a range of cutting parameters, making the insert suitable for interrupted cuts or varied feed rates. The 0° clearance helps maintain positive contact in many turning set-ups, while the 0.8 mm corner radius provides a favourable balance between edge strength and achievable surface finish. These features combine to lower scrap rates and reduce secondary finishing on turned cast-iron parts. System approach and practical application guidance Designed as part of an ISO indexable insert system, the component functions within a set-up that includes the insert, a matching external holder or boring bar, a shim/clamping kit and replacement screws. For external and internal turning, select the chipbreaker and grade according to workpiece stability, interruption of cut and the desired cutting speed to exploit the economic potential of the T515 grade. The insert’s rhomboid format and central hole simplify indexing and replacement, supporting continuous machining with minimal set-up times. Contact Metav Werkzeuge today for original Tungaloy DNMG150408 T515 inserts and expert recommendations for holder matching and optimal cutting parameters. Technical data Article number: 6757859 SKU: 6757859-Tungaloy Manufacturer SKU: TUN6757859 Name: DNMG150408 T515 Tungaloy-Wendeplatte Material: carbide Core specifications ISO designation: 150408 Lead/approach angle: 55° Clearance angle: 0° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 15 mm Design & features Rhomboid plate form Cylindrical hole for clamping Double-sided chipbreaker CVD-coated carbide grade T515 Intended use: turning of cast iron ISO-compliant indexable insert System components: insert, holder, shim/clamping set, replacement screws FAQ What materials is this insert recommended for? The DNMG150408 T515 insert is optimised for machining cast iron; the CVD-coated carbide grade provides stable performance when turning iron-based workpieces. How many cutting edges are available per insert? The double-sided design offers two usable cutting edges per indexed position on the DNMG150408 T515 Tungaloy indexable insert, enabling economical edge utilisation. Which holders are compatible with this insert? Compatibility is determined by the holder’s form, clearance angle, tolerance class, attachment method, size and thickness; use holders rated for ISO rhomboid DNMG inserts to ensure correct seating. What benefits does the CVD coating provide? The CVD-coated carbide on this Tungaloy grade improves wear resistance and thermal stability, extending tool life and supporting consistent machining parameters on cast iron. Is the insert suitable for interrupted cuts? Yes, the chipbreaker geometry and robust carbide substrate of the DNMG150408 T515 support interrupted cutting conditions when the appropriate feed and speed are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com