DNMG 150408 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, the GH330 Tungaloy grade and secure clamping for consistent turning performance; order directly via Metav Werkzeuge or consult our experts for application-specific recommendations. DNMG 150408 GH330 turning insert by Tungaloy — ISO DNMG, 55° A DNMG150408 GH330 indexable turning insert for external and internal turning in ISO tool systems, offering a balanced mix of wear resistance and edge stability. ISO DNMG 150408 geometry for universal turning GH330 Tungaloy grade for wear resistance 0° clearance with 0.8 mm corner radius Double‑sided chipbreaker, cylindrical centre hole Extended tool life through a purpose‑built grade The GH330 grade from Tungaloy is formulated to provide a reliable balance between wear resistance and toughness for turning applications. This composition reduces flank and crater wear under typical machining parameters, which in turn supports longer intervals between indexings and minimises tool change‑over downtime. The grade's stability at the cutting edge helps to maintain dimensional accuracy over extended runs, delivering predictable productivity and lower overall machining costs. Geometry engineered for versatile turning performance The rhombic ISO DNMG form with a 55° included angle and 0° clearance is suited to a wide range of external and internal turning tasks. A 0.8 mm corner radius improves edge strength where interrupted cuts or heavier feeds are required, while the 55° geometry offers a good compromise between approach angle and cutting force distribution. These geometric choices translate into consistent surface finish and reliable chip formation when the correct chipbreaker and process parameters are selected. System compatibility and secure clamping for repeatable results Compatibility with clamping systems depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; this insert is supplied as an ISO‑format indexable plate and is intended to be used with matching external holders or boring bars plus the appropriate shim and screw set. Correct pairing of insert and holder ensures secure seating, repeatable location and optimum heat dissipation. Where necessary, select a holder that matches the insert thickness of 4.76 mm and the rhombic profile to preserve cutting geometry and minimise vibration. Practical advice for selecting chipbreaker and application setup This double‑sided insert features a double‑sided chipbreaker; choose the chipbreaker and grade combination according to workpiece material, cutting direction and machine stability. For higher feeds or interrupted cuts the larger corner radius grants greater edge resilience, while smaller radii favour finer surface finish. The ISO format simplifies replacement and inventory management, allowing a rapid swap to restore cutting performance and keep production moving. For tailored advice on application parameters or to request matching holders and clamping sets, contact Metav Werkzeuge—our specialists will recommend the optimal setup for your turning process. Technical data Article number: 6803398 SKU: 6803398-Tungaloy Manufacturer SKU: TUN6803398 Model series: ISO‑turning inserts Facts Plate designation: DNMG150408 Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 55° Special features Material: carbide Grade: GH330 (Tungaloy) Shape: rhombic (DNMG) Centre hole: with cylindrical hole Chipbreaker: double‑sided Application: turning System: ISO‑standard indexable insert FAQ What machining tasks is this insert intended for? The DNMG150408 GH330 indexable insert is intended for external and internal turning operations and is compatible with ISO‑format turning tool systems. How does the GH330 grade affect tool life? The GH330 Tungaloy grade combines wear resistance and toughness to extend edge life and provide stable cutting performance under typical turning conditions. Which holder components are required to use this insert? Use a matching external holder or boring bar designed for ISO DNMG inserts, plus the appropriate shim and clamping screw to ensure correct seating and repeatable location. Is the insert single‑ or double‑sided and what is the hole style? This insert is double‑sided with a cylindrical centre hole, allowing indexing to a fresh cutting edge and secure clamping. Can the corner radius be changed for different finishes? The insert has a fixed 0.8 mm corner radius; for different surface finish requirements select a DNMG variant with a smaller or larger radius as appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of stable cutting performance, balanced wear resistance and straightforward ISO compatibility for reliable turning operations. The double-sided design and cylindrical hole support secure clamping and cost-efficient indexability. Order the DNMG150408 GH330 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408 GH330 Tungaloy ISO turning insert — rhombic 55°, double-sided, with cylindrical hole The DNMG150408 GH330 Tungaloy is an ISO-standard rhombic turning insert designed for external and internal turning; compatibility with holders is determined by form, clearance angle, tolerance class, attachment, size and thickness. ISO rhombic insert, 55° cutting geometry GH330 grade with balanced wear resistance Double-sided insert with cylindrical hole for secure clamping 0° clearance angle for stable cutting Consistent machining performance through a wear‑resistant grade The GH330 grade combines wear resistance with sufficient toughness to maintain edge stability across interrupted and continuous cuts. Designed as a cemented carbide grade, the specification delivers a controlled compromise between life and reliability, which reduces the frequency of index changes and supports steady cycle times. Because the grade is optimised for general turning, the insert is particularly suitable where repeatable tool life and consistent surface quality are required. Cost efficiency and secure clamping for productive turning The double-sided geometry increases the number of usable edges per insert, improving cost-per-cut economics without compromising stability. The cylindrical hole and standard clamping interfaces ensure a secure seat in ISO-compatible holders; this stable fixation supports higher material removal rates where machine and workpiece stability allow. The rhombic 55° form gives a favourable approach for both finishing and medium-duty turning tasks while the 0° clearance angle helps maintain a repeatable cutting line in robust set-ups. System-level compatibility and straightforward tool selection The insert is intended for use as part of a turning system: ISO insert, matching external holder or boring bar, shim/clamping set and replacement fastening screws. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so correct holder selection is essential. Select the chipbreaker and grade to match the workpiece material, cutting strategy and machine rigidity; this approach yields stable chip formation and consistent surface finish with minimal adjustment. Discuss GH330 performance and availability with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for stock and technical advice Technical data Manufacturer article number: 6803380 Manufacturer SKU: TUN6803380 Metav SKU: 6803380-Tungaloy Model series: ISO turning inserts Facts Cutting angle: 55° Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 15 mm Clearance angle: 0° Special features Material: carbide Grade: GH330 (Tungaloy) Chipbreaker: double-sided Hole: cylindrical hole (with hole) Shape: rhombic Two usable cutting edges per face (double-sided) Compatibility: ISO-standard holder interface (form, clearance angle, tolerance class, attachment, size, thickness) FAQ What applications suit this insert best? The DNMG150408 GH330 Tungaloy insert is intended for external and internal turning where a rhombic 55° geometry and balanced wear resistance are required; it performs well in general turning operations. How does the GH330 grade influence tool life? The GH330 grade provides a compromise of wear resistance and toughness, so the DNMG150408 GH330 Tungaloy insert gives consistent edge stability and predictable tool life across a range of turning tasks. Is the insert compatible with standard ISO holders? Yes — compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG150408 GH330 Tungaloy insert is designed for ISO-standard holders. What advantages does the cylindrical hole provide? The cylindrical hole ensures secure clamping and correct seating in the holder, which improves repeatability and reduces the risk of insert movement during cutting when using the DNMG150408 GH330 Tungaloy insert. How many cutting edges are available per insert? The double-sided design provides multiple indexable edges, offering economical re‑indexing and reduced tooling cost per edge for the DNMG150408 GH330 Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 GH330 Wendeplatten - Tungaloy
Precision turning benefits from standardised geometry and a balanced grade: the combination of ISO conformity and Tungaloy’s GH330 carbide delivers reliable cutting-edge stability and consistent chip control. The rhombic form and cylindrical hole enable fast, secure mounting into compatible holders, supporting efficient changeovers. Order the DNMG150408 GH330 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150408 GH330 insert for Turning — Tungaloy A DNMG150408 GH330 ISO rhombic carbide insert optimised for external and internal turning, designed to combine wear resistance with cutting-edge stability for production environments. ISO-standardised rhombic insert DNMG150408 Tungaloy GH330 grade with wear resistance Double-sided chipbreaker for flexible use Cylindrical hole and 0° clearance for clamping Predictable compatibility for reduced setup time The ISO designation and precisely defined geometry ensure compatibility with standard turning holders and toolposts; the insert’s fit is governed by form, clearance, tolerance class, fastening type, size and thickness. This predictability shortens setup and changeover times and reduces the risk of misassembly. For workshops seeking reproducible results, the ISO alignment supports rapid insertion into the tool system and consistent positioning during machining. Balanced grade for longer tool life and stable cutting The GH330 grade from Tungaloy provides a deliberate blend of wear resistance and toughness, formulated to maintain a stable cutting edge under typical turning loads. This balance reduces flank wear while resisting chipping on interrupted cuts, so machining cycles remain consistent. The double-sided chipbreaker complements the grade by improving chip formation and evacuation, which enhances surface finish and process reliability when paired with appropriate cutting parameters. Secure clamping and compact geometry for versatile use With a 15 mm inscribed circle, a 4.76 mm thickness and a 0.8 mm corner radius, the insert offers a compact footprint that suits both external and internal operations where tool access is constrained. The cylindrical hole allows positive clamping and straightforward orientation in clamping sets, while the 0° clearance maintains the intended cutting geometry. These attributes simplify handling, reduce downtime during index changes and support consistent component tolerances. Practical application guidance for efficient turning Designed for turning operations, the insert integrates into a system consisting of the ISO insert, a compatible external holder or boring bar, a backing/clamping set and replacement screws. Selecting the correct chipbreaker variant and matching the GH330 grade to the workpiece material and machining stability yields the best economy: improved cycle time, fewer interruptions and predictable tool life. For specific applications, adjust feed and speed to match the grade’s balance of wear and toughness. Contact Metav Werkzeuge for application advice on Tungaloy GH330 inserts and to secure suitable quantities and accessories for immediate production use Technical data Article number: 6803410 Manufacturer SKU: TUN6803410 SKU: 6803410-Tungaloy Material: carbide Model series: ISO turning indexable inserts Application: turning Facts Corner radius: 0.8 mm Included angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Inscribed circle: 15 mm ISO code: 150408 Special features Double-sided chipbreaker Rhombic shape (DNMG) Cylindrical hole ISO-standard insert Grade GH330 by Tungaloy Compatible with ISO holders FAQ What machining tasks suit this insert best? The insert is intended for turning tasks; the GH330 grade and rhombic geometry make it suitable for external and internal turning where balanced wear resistance and edge stability are required. How does the GH330 grade improve process reliability? GH330 combines wear resistance and toughness to maintain cutting-edge stability during typical turning operations, helping to reduce unexpected tool failure and maintain surface quality. Can the insert be used on common holder systems? Yes, the ISO-standard geometry of the DNMG150408 ensures compatibility with ISO holders when form, clearance, tolerance class, fastening and thickness match. What are the key dimensions to check when replacing inserts? Check the inscribed circle (15 mm), plate thickness (4.76 mm), corner radius (0.8 mm) and hole style (cylindrical) to ensure proper fit and clamping. Is chip control tailored for different materials? The double-sided chipbreaker is designed to deliver adaptable chip formation; selecting the appropriate breaker and adjusting cutting parameters will optimise chip control for the chosen workpiece. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 GH330 Wendeplatten - Tungaloy
High-performance GH330 carbide and ISO DNMG form provide robust edge stability and broad turning applicability. The 0.8 mm corner radius and double-sided chipbreaker allow economical indexing and reliable surface results. Order the insert via Metav Werkzeuge or request application advice from our consultants for holder compatibility and immediate dispatch. DNMG150408 GH330 Tungaloy indexable insert for turning The DNMG150408 GH330 Tungaloy is an ISO-standard indexable insert optimised for external and internal turning operations, combining a balanced carbide grade with a versatile rhombic geometry. DNMG150408 geometry, 55° cutting angle GH330 grade for wear resistance and toughness Rhombic plate with 0.8 mm corner radius Double-sided chipbreaker, cylindrical hole Longer tool life through balanced carbide grade and cutting-edge stability The GH330 specification is a Tungaloy carbide formulation developed to combine wear resistance with sufficient toughness, reducing flank wear and preserving the cutting edge during interrupted cuts. In practical terms, this leads to fewer tool changes and more consistent cycle times on the shop floor. When paired with appropriate machining parameters, the insert’s composition supports productive turning where process stability and repeatable results are required. Secure clamping and ISO compatibility for straightforward tool selection The ISO DNMG150408 form factor, 55° cutting geometry and rhombic outline make this insert compatible with a wide range of external holders and boring bars. The 0° relief angle, 4.76 mm plate thickness and the cylindrical hole ensure reliable clamping and repeatable positioning in the toolholder. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; therefore the overall tooling system should include a matching holder or boring bar, a suitable shim/clamp set and replacement screws for secure assembly. Operational efficiency from chip control and indexable design The double-sided chipbreaker design enables effective chip control across different cutting conditions and permits economical use of both sides before replacement. The 0.8 mm corner radius contributes to edge strength and can improve surface finish when the machining setup is stable. Together, the rhombic shape and chipbreaker give flexibility for finishing and light-medium machining tasks. For best results, select the chipbreaker and grade according to the workpiece material, machining type and machine stability. For precise holder matching and stock availability of the Tungaloy DNMG150408 GH330 indexable insert, contact Metav Werkzeuge for technical guidance and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6803403-Tungaloy Manufacturer SKU: TUN6803403 Manufacturer article number: 6803403 Article name: DNMG150408 GH330 Tungaloy indexable insert Model series: ISO indexable turning inserts Core dimensions & numbers Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 0° Features & compatibility Shape: rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Material: carbide Grade: GH330 Application: turning (external and internal) System components: matching external holder or boring bar; shim/clamp set; spare screws FAQ What materials is the GH330 grade suited for? The GH330 grade is a Tungaloy carbide formulation that offers a compromise between wear resistance and toughness; in the DNMG150408 GH330 indexable insert this supports reliable performance across a broad range of common turning applications when the chipbreaker and cutting data are matched to the workpiece. How is holder compatibility determined for this insert? Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; the DNMG150408 GH330 is designed for ISO DNMG toolholders and requires a holder that accepts a 15 mm rhombic insert with a 4.76 mm thickness and a cylindrical locating hole. Can the insert be indexed to use more cutting edges? Yes, the DNMG150408 GH330 insert is double-sided and can be indexed to employ multiple cutting edges, extending the service life before replacement and helping to reduce machine downtime. What is needed to assemble the insert into a tooling system? A complete system typically comprises the indexable insert itself, a compatible external turning holder or boring bar, an appropriate shim/clamp set and replacement screws to secure the insert in the holder Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 GT9530 Wendeplatten - Tungaloy
Take advantage of coated cermet durability and a 0.8 mm corner radius for consistent finishing on steel; the ISO format ensures straightforward holder compatibility and streamlined tool management with traceable manufacturer references via Metav Werkzeuge. DNMG150408 GT9530 Tungaloy turning insert — coated cermet, 0.8 mm radius DNMG150408 GT9530 is an ISO rhombic turning insert designed for finishing to light universal turning of steel under stable conditions Coated cermet GT9530 for wear resistance 0.8 mm corner radius for fine finishes Double-sided chipbreaker for stable chips ISO rhombic DNMG 55° geometry High-efficiency finishing and predictable tool life The combination of a coated cermet grade and a small corner radius delivers repeatable surface quality and extended intervals between interventions. GT9530 is formulated as a wear-resistant finishing to light universal grade, which means the insert maintains edge integrity during sustained, stable cuts; the result is reduced scrap rates and more consistent component surfaces. As the cutting edge is coated, friction and flank wear are reduced, producing measurable process stability even in continuous turning operations. Chip control and geometry that aids process reliability The double-sided chipbreaker and rhomboid profile are engineered for predictable chip formation and secure clamping, minimising vibrations that degrade surface finish. The 55° approach angle and 0° relief contribute to a cutting geometry suited to outside and inside turning routines where dimensional accuracy and finish are priorities. For practical selection, match the chipbreaker and grade to the workpiece, the chosen cut depth and the rigidity of the setup to gain the best balance between tool life and productivity. Interchangeability, handling and procurement benefits As an ISO-standard insert, compatibility with external holders depends on form, clearance angle, tolerance class, fastening, size and thickness; this standardisation simplifies stocking and replacement. The insert is supplied with a cylindrical hole for positive location and is double-sided, allowing indexation to use both edges where appropriate. Traceability is supported by clear article and SKU identifiers, simplifying procurement and inventory control across production sites. Operator guidance and application scope The grade is targeted at steel machining where a good surface and longer tool life are required under stable conditions; it is not optimised for highly interrupted cuts or extremely abrasive materials. The cermet composition combines ceramic hardness with a metal binder to offer good wear resistance while maintaining adequate toughness; this makes it particularly suitable for finish turning and light finishing cycles. For best results, ensure the holder and clamping suite match the ISO DNMG form and the component fixturing provides sufficient rigidity. Contact Metav Werkzeuge for application advice and procurement of Tungaloy DNMG150408 GT9530 turning inserts — technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6998091 Manufacturer SKU: TUN6998091 Manufacturer article number: 6998091 Model series: ISO-Drehwendeschneidplatten Facts Grade: GT9530 (coated cermet) Material: cemented carbide Designation: DNMG150408 Size designation: 15 Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief (free) angle: 0° Cutting edge angle: 55° Special features Double-sided chipbreaker Rhombic plate form With hole — cylindrical hole style Application: Turning (outside and inside) System composition: insert, matching external holder, clamping set and screws FAQ What is the primary application for this insert? The DNMG150408 GT9530 insert is intended for finishing to light universal turning of steel where a good surface finish and longer tool life are required under stable cutting conditions. How does the GT9530 grade affect performance? The GT9530 coated cermet offers improved wear resistance and edge life compared to uncoated grades; this results in more consistent finishes and fewer tool changes during finishing operations. Can the insert be indexed to use both cutting edges? Yes, the insert is double-sided with a cylindrical hole and a rhombic form allowing indexation to the second cutting edge for economical use of the insert. Which holder characteristics are critical for compatibility? Compatibility is governed by insert form, relief angle, tolerance class, fastening method, size and thickness; ensure the holder is specified for DNMG 55° geometry and the listed thickness for secure clamping. Is this insert suitable for interrupted cuts or cast materials? This grade is optimised for stable finishing on steel; for highly interrupted cuts or different materials, select a grade and chipbreaker tailored to the specific material and cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 GT9530 Wendeplatten - Tungaloy
Combining the GT9530 coated cermet grade with a 0.8 mm nose radius and a 55° rhombic geometry delivers wear-resistant finishing and consistent surface quality; the double-sided design supports cost-effective indexing and reduced tooling downtime. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored recommendations. DNMG150408 GT9530 Tungaloy indexable turning insert for turning (55° rhombic) A DNMG150408 GT9530 indexable insert engineered for finishing and light universal turning of steel, designed for stable setups and extended tool life Coated cermet grade GT9530 for wear resistance 55° rhombic geometry for stable cutting 0.8 mm nose radius for fine surface finish Double-sided insert with cylindrical hole for secure clamping Longer tool life and improved surface quality for finishing The coated cermet composition of this indexable insert is optimised for wear-resistant finishing and light universal turning of steel where surface integrity and tool life are priorities. The selected grade, GT9530, balances toughness and abrasion resistance to maintain a consistent cutting edge in stable conditions, reducing the frequency of tool changes. By choosing a cermet-based grade rather than a conventional carbide for finishing cuts, shops can reliably achieve improved part finish and extended edge stability without sacrificing process efficiency. Stable geometry and secure clamping reduce vibration and scrap With an ISO-conformant rhombic form and a 55° lead angle, the insert provides a predictable cutting direction that benefits both external and internal turning operations. The double-sided design and cylindrical hole arrangement permit safe indexing and quick orientation changes, while the 0.8 mm nose radius supports consistent profile control and surface quality. Compatibility with a matching holder is determined by form, clearance angle, tolerance class, fastening, size and thickness, ensuring a secure fit and minimised chatter when paired with the correct tooling system. Practical workflow advantages that support productivity The insert is intended as part of a complete system — an ISO insert, a suitable external holder or boring bar, a backing/clamping kit and replacement screws — so that spindle time is maximised and set-up is repeatable. The integrated chipbreaker design suits finishing to light roughing tasks depending on material and machine stability, which simplifies tool assortment decisions. If further clarification on holder selection or cutting strategy is required, Metav Werkzeuge’s technical team is available to advise on best practice and application parameters; contact details: info@metav-werkzeuge.com, +49 2822 7131930. Contact Metav Werkzeuge for application advice, availability of the DNMG150408 GT9530 insert and tailored tooling recommendations Technical data Article number: 6998074 Manufacturer SKU: TUN6998074 SKU: 6998074-Tungaloy Model series: ISO turning indexable inserts Designation: DNMG150408 Facts Insert size: 15 mm Thickness: 4.76 mm Nose radius: 0.8 mm Lead angle: 55° Clearance angle: 0° Hole style: cylindrical hole Special features Coated cermet grade GT9530 Double-sided chipbreaker Rhombic shape (55°) With hole for secure clamping Intended application: turning (external and internal) Compatibility depends on form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The DNMG150408 GT9530 insert is a coated cermet grade intended primarily for finishing to light universal turning of steel, providing improved surface quality and longer life under stable machining conditions. Is the insert indexable on both sides? Yes. The DNMG150408 GT9530 Tungaloy indexable insert (SKU 6998074-Tungaloy) is double-sided, allowing rotation to a fresh cutting edge and helping to extend the usable life of each insert. Which holder type is required for this insert? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the insert fits standard ISO holders designed for DNMG150408 geometry and 4.76 mm thickness. What surface finish can be achieved with this insert? Thanks to the 0.8 mm nose radius and the GT9530 coated cermet grade, the insert supports fine surface finishes when used in finishing operations with stable tool setups. Can this insert be used for internal turning? Yes. The geometry and chipbreaker design make it suitable for both external and internal turning applications when matched with an appropriate boring bar and stable conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant, coated cermet grade and a stable rhombic geometry for consistent finishing and extended tool life; order through Metav Werkzeuge or request application advice from our consultants. DNMG150408 GT9530 ISO turning insert — Tungaloy, coated cermet, 0° clearance The DNMG150408 GT9530 is an ISO rhombic turning insert engineered for external and internal turning applications where high surface quality and longer tool life under stable conditions are required. Coated cermet grade GT9530 0° clearance for fine finishing Rhombic 55° geometry, 15 mm size Cylindrical hole for secure clamping Durable cermet finishing for reliable surface quality The coated cermet designation of this insert combines ceramic hardness with metallic toughness to deliver a superior surface finish on steel components. Cermet cutting materials reduce built-up edge and are especially effective in finishing passes where consistent geometry and low cutting forces are priorities. The GT9530 grade is optimised for wear resistance and longer tool life under stable machining conditions, which translates into fewer indexings and less unplanned downtime. By choosing this grade, shops achieve predictable results without sacrificing component finish. Geometry and clamping that ensure repeatable accuracy A rhombic 55° geometry provides a versatile approach angle for both light turning and profiling, while the 0° clearance promotes minimal radial engagement for fine finishing operations. The insert’s cylindrical hole supports precise and secure clamping with standard ISO holders; compatibility depends on matching form, clearance angle, tolerance class, fixing method, size and thickness. Proper pairing of insert and holder reduces vibration and runout, improving surface consistency and protecting the cutting edge from premature wear. Productivity advantages from indexability and chip control The double-sided design with a double-sided chipbreaker permits economical indexability and multiple usable cutting edges per insert, increasing the effective life of each part. In a production environment this reduces tool change frequency and tooling cost per component. The insert is part of a system consisting of the ISO indexable plate, a suitable external holder or boring bar, a support/shim set and replacement clamping screws; this modular approach simplifies setup and helps maintain high process reliability on batch and serial operations. Best applications and recommended use for machining steel This grade is intended primarily for finishing to light semi-finishing on steel, where a good surface and predictable wear behaviour are required. Selection of chipbreaker and grade should match the workpiece material, machining method and machine/tool stability. The insert performs well under steady cutting conditions and with appropriate coolant strategies; when higher roughing forces or interrupted cuts are present, a different grade or geometry may be more suitable. For external and internal turning, the combination of geometry and coated cermet material is particularly effective at producing fine surfaces with consistent repeatability. For application guidance or to secure stock of Tungaloy GT9530 inserts, contact Metav Werkzeuge for tailored recommendations and immediate availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6707277-Tungaloy Manufacturer SKU: TUN6707277 Manufacturer article number: 6707277 Model series: ISO-Drehwendeschneidplatten Facts Size: 15 mm Thickness: 4.76 mm Insert angle: 55° Corner radius: 0.8 mm Clearance angle: 0° Hole style: cylindrical hole Special features Coated cermet cutting material (GT9530) Double-sided chipbreaker Rhombic plate shape ISO-standard indexable turning insert Intended application: turning (external and internal) System: insert, holder, support/shim and clamping screws FAQ What materials is this insert best suited to machine? The DNMG150408 GT9530 insert is optimised for finishing and light universal work on steel, offering good surface quality and extended life when used under stable cutting conditions. How does the GT9530 coating improve performance? The GT9530 coated cermet reduces wear and built-up edge compared with uncoated grades, resulting in more consistent finishes and fewer indexings in finishing operations. Is the insert compatible with standard ISO holders? Compatibility is achieved by matching the insert form, clearance angle, tolerance class, fixing method, size and thickness; the DNMG150408 fits standard ISO rhombic holders designed for this geometry. What advantages does the 0° clearance provide? A 0° clearance minimises radial engagement for fine finishing passes, helping to produce a superior surface finish with reduced tendency for chatter under stable set-ups. How does the double-sided chipbreaker affect productivity? The double-sided chipbreaker allows multiple indexable edges and improved chip control, lowering tooling costs per part and reducing machine downtime for tool changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 GT9530 Wendeplatten - Tungaloy
Take advantage of the GT9530 coated cermet for improved surface finish and extended tool life combined with a stable 0° rake and cylindrical mounting for secure clamping. Order the DNMG150408 GT9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408 GT9530 ISO indexable turning insert for turning — Tungaloy The DNMG150408 GT9530 is an ISO‑normed indexable turning insert designed for external and internal turning, providing a wear‑resistant coated cermet grade optimised for finishing and light universal cuts. Coated cermet grade GT9530 for finishing ISO DNMG 150408 rhombic insert, 55° cutting angle 0° rake and cylindrical mounting hole for stability 0.8 mm nose radius for consistent surface finish Precision finishing and extended tool life for steel turning The GT9530 coated cermet combines a fine ceramic matrix with a metallic binder to deliver excellent wear resistance and a superior surface finish when machining steel. In stable machining conditions the material composition reduces flank wear and helps achieve consistent part quality over longer tool life, which in turn lowers running costs and reduces unplanned stoppages. This makes the grade particularly suitable where a high‑quality finish and predictable performance are priorities. Secure seating and predictable cutting geometry save setup time Delivered in the ISO DNMG form, the insert’s rhombic geometry and 55° cutting angle ensure predictable engagement with the workpiece. The cylindrical hole and the specified plate thickness (4.76 mm) provide accurate centring and repeatable clamping in compatible external holders and boring bars; compatibility depends on holder form, clearance angle, tolerance class, fastening and size. The 0° rake gives a neutral cutting action that improves stability during finishing cuts and is especially beneficial when rigidity of the tool setup is the limiting factor. Reproducible chip control and economical edge utilisation The double‑sided chipbreaker design offers controlled chip formation and the option to present a fresh cutting edge after indexing, supporting continuous production and predictable change intervals. Combined with the 0.8 mm nose radius, this results in uniform surface quality and reduces the need for secondary finishing. The coated cermet grade is aimed at light universal to finishing operations in steel where stable conditions prevail; selecting the matching chipbreaker and holder according to workpiece material and process stability will maximise productivity. Clear application scope and selection guidance Designed primarily for turning of steel, the insert is suitable for both external and internal operations where a good surface finish and longer life under steady cutting conditions are required. When defining a machining strategy, pair the insert with a matching external holder or boring bar and a suitable clamp set and screws to complete the system. For mixed‑operation shops, consider toolholder rigidity and process stability first; the GT9530 grade rewards stable setups by delivering consistent results and less frequent edge changes. Contact Metav Werkzeuge for tailored advice on selecting the right holder and chipbreaker for the Tungaloy DNMG150408 GT9530 insert and to confirm suitability for specific turning tasks Technical data Article number: 6998082 Manufacturer SKU: TUN6998082 Model series: ISO indexable turning inserts Name: DNMG150408 GT9530 Tungaloy insert Manufacturer: Tungaloy Core data Insert size: 15 mm Thickness: 4.76 mm Nose radius: 0.8 mm Cutting angle: 55° Rake angle: 0° Hole: cylindrical Chipbreaker: double‑sided Special features Coated cermet grade GT9530 Rhombic plate shape (DNMG) Suited for steel; finishing to light universal ISO‑normed compatibility with suitable holders System components: insert, external holder or boring bar, clamp set and screws FAQ Which materials is this insert intended for? The DNMG150408 GT9530 is specified mainly for machining steel, providing good surface finish and extended life in stable turning conditions. Is the insert indexable and how does the chipbreaker help? The insert features a double‑sided chipbreaker, allowing reindexing to present additional cutting edges and delivering reproducible chip control for finishing operations. How does the cylindrical hole benefit the setup? A cylindrical mounting hole aids precise centring and secure clamping in compatible holders, improving repeatability and reducing setup variation. What holder type is required for this DNMG insert? Compatible external holders or boring bars must match the ISO DNMG form, clearance angle, tolerance class, fastening method, size and thickness to ensure correct seating and cutting geometry. For which turning operations is this grade most suitable? The GT9530 grade is optimised for finishing and light universal turning in steel, where a balance of surface quality and tool life is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150408 GT9530 Wendeplatten - Tungaloy
Data inconsistency detected: the product listing specifies both "Hartmetall" and a coated cermet grade (GT9530) as the cutting material, which creates confusion regarding the actual composition and intended use of the product, potentially leading to misinterpretation by customers or incorrect applications; therefore, it is essential to carefully verify the source data, identify the correct cutting material, and resolve the conflicting material information to ensure accuracy and clarity in the product description, as well as to maintain the integrity of the listing and prevent any issues that could arise from providing contradictory or unclear details about the product's specifications.
DNMG 150408 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of durable cermet cutting performance, consistent surface finish and straightforward ISO compatibility for reliable turning operations; order the DNMG150408 GT9530 directly via Metav Werkzeuge or ask our consultants for application advice. DNMG150408 GT9530 indexable insert for turning by Tungaloy — coated cermet, 55° rhombic DNMG150408 GT9530 is an ISO-standard indexable insert for turning, engineered as a wear-resistant cermet grade for finishing to light universal steel applications where surface quality and extended tool life are required. GT9530 coated cermet grade Excellent surface finish and longer tool life Double-sided chipbreaker for versatility ISO DNMG 150408, 55° rhombic form Precision finishing and prolonged service life for stable processes The GT9530 grade is a coated cermet designed for finishing to light universal turning of steel under stable conditions. Thanks to its wear-resistant cutting material, the insert maintains cutting-edge integrity for longer intervals, which reduces the need for frequent index changes and supports uninterrupted production runs. The combination of cermet chemistry and coating enhances temperature stability at the cutting edge, producing consistent surface finish outcomes and predictable tool-change intervals. Seamless integration with ISO tool systems for quick setup Supplied in the ISO DNMG form, the insert matches common external holders and boring bars where compatibility depends on form, clearance angle, tolerance class, fastening and thickness. The rhombic 55° geometry and the presence of a cylindrical hole ensure secure clamping and repeatable seating in standard indexable insert holders. This compatibility minimises setup time and simplifies tool inventory management across workshops using ISO tooling systems. Process efficiency and versatility through chip control Equipped with a double-sided chipbreaker, the insert supports reliable chip formation across a range of feed rates typical for finishing and light turning tasks. Controlled chipflow reduces the risk of workpiece damage, shortens cycle times by enabling stable cutting conditions and contributes to operator safety. For production environments where throughput and part quality matter, this configuration offers a pragmatic balance between productivity and surface integrity. Recommended applications and material compatibility The insert is intended primarily for turning operations on steel where a fine surface and extended edge life are required. The cutting concept suits stable setups and finishing passes; selecting the matching chipbreaker and grade makes it suitable for a range of workpiece conditions. As a cemented carbide-based insert with a coated cermet grade, it offers improved wear resistance compared with conventional uncoated grades, supporting consistent results on typical steels encountered in general machining. For expert advice on integrating Tungaloy DNMG150408 GT9530 inserts into existing toolholders and for ordering, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with holder compatibility and application optimisation. Technical data Article number: 6998086-Tungaloy Manufacturer SKU: TUN6998086 Material: Cemented carbide Model series: ISO turning indexable inserts ISO designation: DNMG150408 Numbers / Core technical data Corner radius: 0.8 mm Insert size: 15 mm Thickness: 4.76 mm Clearance angle: 0° Geometry angle: 55° Designs / Special features Grade/coating: GT9530 (coated cermet) Chipbreaker: double-sided Shape: rhombic (DNMG) Hole: with cylindrical hole Typical use: external and internal turning System: ISO insert compatible with appropriate holders, shims and screws FAQ What materials is this insert best suited for? The DNMG150408 GT9530 insert is optimised for turning steel in finishing to light universal applications; the GT9530 coated cermet enhances wear resistance for stable machining conditions. How does the GT9530 grade affect tool life and surface quality? The GT9530 coating combined with cermet composition extends edge life and improves temperature resistance, which results in more consistent surface finish and fewer index changes during production. Is the insert compatible with standard DNMG holders? Yes, the ISO DNMG150408 form is compatible with standard DNMG holders provided the holder matches the form, clearance angle, tolerance and fastening method. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 GT9530 Wendeplatten - Tungaloy
Take advantage of the wear-resistant GT9530 cermet and the stable 55° rhombic geometry for consistent finishing results; order the insert directly via Metav Werkzeuge or consult our technical advisors if additional application support is required. DNMG 150408 GT9530 Tungaloy indexable insert for Turning — coated cermet, rhombic 55° geometry DNMG150408 GT9530 is a coated cermet indexable insert designed for precision external and internal turning applications where surface finish and extended tool life are priorities ISO‑standard rhombic insert for turning GT9530 coated cermet grade 0.8 mm corner radius for fine finishes Cylindrical hole for secure clamping Achieve consistent finishing with a wear-resistant cermet grade The GT9530 grade is a coated cermet developed for wear-resistant finishing and light universal turning tasks on steel. Its composition provides improved resistance to abrasive wear while maintaining edge sharpness, which results in a consistent surface quality and reduced need for secondary machining. The insert is suitable for applications where a high-quality finish is required under stable machining conditions; selection of the appropriate chipbreaker and cutting parameters will further optimise productivity. Stable geometry for predictable turning performance The rhombic DNMG form features a 55° lead angle combined with a 0° relief angle, giving a reliable cutting geometry for both external and internal turning operations. A 0.8 mm corner radius supports fine surface finishing while the 4.76 mm thickness increases stiffness in less rigid set‑ups. The insert is double‑sided with a cylindrical hole, enabling economical indexing and secure mounting in ISO‑compatible toolholders. These geometric features reduce vibration and help maintain dimensional accuracy across medium‑run production. System compatibility and efficient process integration Designed as part of an ISO insert system, the item is to be used with a compatible external holder or boring bar, plus appropriate clamping set and replacement screws. The cemented carbide substrate with a coated cermet surface combines tool life and edge stability, which can lower tooling costs per component in repeated production. For process planning, the grade is recommended for finishing to light general‑purpose turning on steel; specify the double‑sided chipbreaker and cutting data that match workpiece stability to achieve optimal results. If uncertain about toolholder compatibility or cutting data, technical assistance is available via info@metav-werkzeuge.com or by phone at +49 2822 7131930. For tailored advice on applying the Tungaloy DNMG150408 GT9530 insert in production and for procurement through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998078 Manufacturer SKU: TUN6998078 SKU: 6998078-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Numbers / Core technical data Insert designation: DNMG150408 Grade: GT9530 Thickness: 4.76 mm Size: 15 mm Corner radius: 0.8 mm Relief angle: 0° Lead angle: 55° Hole: cylindrical Special features Coated cermet cutting material Double‑sided with chipbreaker ISO rhombic insert form Suitable for turning (external and internal) Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The DNMG150408 GT9530 Tungaloy insert is optimised for steel; the GT9530 cermet grade provides wear resistance and is intended for finishing to light universal turning on steel. Can the insert be mounted in standard ISO holders? Yes, the insert is ISO‑standard and compatibility with a holder is determined by the insert form, relief angle, tolerance class, clamping method, size and thickness. How does the double‑sided design affect cost efficiency? The double‑sided configuration of the DNMG150408 GT9530 allows indexing of multiple cutting edges, which reduces tooling costs per edge and shortens downtime for inserts changes. Which chipbreaker should be selected for stable conditions? Select the chipbreaker suited to finishing or light cutting and match it to the workpiece material and operation stability; the GT9530 grade works well with the supplied double‑sided chipbreaker for improved surface quality. Is the insert suitable for internal boring as well as external turning? Yes, the rhombic 55° geometry and 0.8 mm corner radius make the insert versatile for both external and internal turning when the holder assembly provides sufficient stiffness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150408 KS05F Wendeplatten - Tungaloy
Take advantage of the combination of KS05F Tungaloy grade, precise 55° rhombic geometry and a secure cylindrical mounting for consistent, economical turning performance. Order or request tailored advice via Metav Werkzeuge for quick integration into production. DNMG150408 KS05F DNMG turning insert by Tungaloy DNMG150408 KS05F is an ISO-standard rhombic indexable insert optimised for external and internal turning tasks, combining a robust carbide substrate with a grade designed for balanced wear resistance and edge stability. ISO-standard rhombic 55° geometry KS05F Tungaloy carbide grade Double-sided chipbreaker Cylindrical hole for secure clamping Consistent cutting geometry for reliable process results The rhombic, ISO-conforming 55° geometry provides a stable cutting edge that suits a wide range of lathe setups. The combination of the rhombic shape and the specified 0° clearance angle maintains a predictable contact zone between tool and workpiece, reducing vibration and improving surface finish. Compatibility with the toolholder depends on form, clearance angle, tolerance class, fastening, size and thickness; this indexable format simplifies replacement and reduces machine downtime compared with solid tooling. The proven geometry supports both external and internal turning operations where repeatable accuracy and efficient chip control are priorities. KS05F grade and carbide construction for extended tool life The insert's KS05F designation denotes a Tungaloy-optimised metallurgical composition that balances wear resistance and toughness. Manufactured from sintered carbide, the grade is formulated to sustain a stable cutting edge under typical turning stresses while resisting abrasive wear. This results in longer intervals between indexing or replacement, fewer unexpected stops and a lower effective tooling cost per component. For machining strategies that prioritise productivity and predictable tool performance, the material-grade pairing offers measurable gains in operational efficiency. Secure clamping and versatile mounting for shop-floor convenience A cylindrical hole combined with a reliable screw-and-clamp arrangement ensures repeatable seating and secure fixation of the insert in the holder. The double-sided design and the integrated double-sided chipbreaker permit two usable cutting edges per index, supporting cost-effective use and fast tool rotation on the machine. The insert thickness of 4.76 mm and the 0.8 mm corner radius contribute to stable engagement for moderate to heavy cuts, while the standardised dimensions simplify holder selection and inventory management. Together, these mechanical features reduce setup time and make the insert a pragmatic choice for production environments. Practical application guidance and selection tips Intended primarily for turning, the insert performs well in general-purpose turning tasks; selection of the chipbreaker and grade should be aligned with workpiece material, machining strategy and machine rigidity. The double-sided chipbreaker allows choice between finishes and chip forms depending on depth of cut and feed. For optimised results, pair the insert with a matching external holder, appropriate pad/clamp kit and the correct fastening screw — the insert is part of a system that includes holder, shim and screw to achieve the specified clamping accuracy. If clarification is needed on holder compatibility or the optimal chipbreaker for a given material, technical consultation is recommended to ensure efficient, repeatable machining. Discuss how the DNMG150408 KS05F can improve process stability and reduce tooling costs — contact Metav Werkzeuge for application advice and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6934801 SKU: 6934801-Tungaloy Manufacturer SKU: TUN6934801 Model series: ISO-Drehwendeschneidplatten Material: Carbide Designation: DNMG150408 KS05F Facts Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Insert angle: 55° Hole: with hole (cylindrical) Special features Rhombic shape Double-sided chipbreaker Cylindrical hole KS05F Tungaloy grade ISO-standardised insert FAQ What machining tasks is this insert intended for? The DNMG150408 KS05F indexable insert is designed for turning, covering both external and internal operations where a rhombic 55° geometry and a balanced grade are appropriate. How does the KS05F grade affect tool life? The KS05F grade from Tungaloy provides a compromise between wear resistance and toughness, which helps the insert maintain edge stability and extend service intervals under standard turning conditions. How is the insert mounted and secured in the holder? Mounting relies on the cylindrical hole and the corresponding screw/clamp system; the geometry and standardised dimensions ensure repeatable seating when used with a compatible DNMG holder and clamp set. Can the insert be indexed to use multiple edges? Yes, the insert is double-sided with a chipbreaker on each usable edge, allowing multiple indexing positions to maximise the number of effective cutting edges. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 KS20 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant carbide grade and an ISO‑standard geometry to secure steady production and consistent surface quality. The combination of KS20 cutting grade and a 55° rhombic form ensures process stability and straightforward tool replacement. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. DNMG150408 KS20 indexable turning insert, 55° rhombic, for turning — Tungaloy The DNMG150408 KS20 is an ISO‑standard rhombic indexable turning insert designed for general external and internal turning, combining a balanced carbide grade with a double‑sided chipbreaker and a cylindrical centre hole for secure mounting. ISO DNMG shape, 55° rhombic KS20 Tungaloy carbide grade Double-sided chipbreaker, cylindrical hole 0.8 mm corner radius, 4.76 mm thickness Consistent tool life and process stability from a balanced carbide grade The specially developed KS20 cutting grade delivers a balance between wear resistance and edge toughness, which lengthens service intervals and reduces unexpected downtime. In practical terms, a stable grade reduces edge chipping and maintains dimensional accuracy over longer runs, supporting predictable cycle times. For manufacturers seeking repeatable results on mixed batches, the carbide substrate offers robustness under varying cutting loads while the grade’s composition supports economical performance in serial turning. Geometry engineered for controlled chips and accurate profiles The 55° rhombic geometry coupled with a 0.8 mm corner radius provides precise contouring and improved access in close tolerances. The double‑sided chipbreaker is designed to break and guide chips reliably, which reduces the risk of entanglement and protects the workpiece surface finish. The insert’s cylindrical hole and standard form ensure compatibility with ISO‑type toolholders; correct mating of holder form, clearance angle and tolerance class secures seating and repeatability in clamping systems, helping to avoid vibration and micro‑movements that degrade finish quality. Workshop compatibility that keeps production flowing These ISO‑standard inserts are straightforward to integrate into existing tool systems: the plate size of 15 mm, plate thickness 4.76 mm and the rhombic outline mean predictable mounting and straightforward inventory management. The insert suits both roughing and finishing when the matching chipbreaker and grade are chosen for the workpiece material. Clear labelling and manufacturer SKUs support traceability and reordering; for complex material mixes, selection of the correct chipbreaker and grade is the decisive factor for tool life and part quality. For tailored advice and to place an order for the Tungaloy DNMG150408 KS20 indexable insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: 6803411 Core specifications Shape: DNMG (55° rhombic) Corner radius: 0.8 mm Thickness: 4.76 mm Size: 15 mm Relief angle: 0° Special features Carbide material (Hartmetall) Cutting grade: KS20 (Tungaloy) ISO indexable turning insert series Double-sided chipbreaker Cylindrical centre hole for secure fixing Intended application: turning (external and internal) ISO designation: DNMG150408 FAQ What materials is this insert suitable for? The KS20 grade in the DNMG150408 insert is formulated for a broad range of turning tasks; the carbide substrate offers reliable performance on typical steels and mixed workpiece materials when the correct chipbreaker is selected. How does the chipbreaker affect machining? A double‑sided chipbreaker on this DNMG insert controls chip form and evacuation, improving surface finish and reducing the risk of chip interference during continuous turning operations. Which holders are compatible with DNMG150408? Compatibility is governed by ISO DNMG geometry, relief angle, tolerance class and the mounting method; the insert’s cylindrical hole and standard form fit ISO‑type external holders and boring bars designed for DNMG plates. Can the insert be used for finishing as well as roughing? Yes — by selecting the appropriate chipbreaker and cutting parameters, the insert can be employed for both roughing and finishing; the 0.8 mm corner radius supports precise profile work while maintaining strength. What identification helps with reordering? Use the manufacturer article number 6803411, SKU 6803411‑Tungaloy or manufacturer SKU TUN6803411 to ensure the correct Tungaloy DNMG150408 KS20 indexable insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of a cermet NS520 cutting grade, ISO-standard DNMG geometry and a secure clamping design to achieve consistent surface quality and extended tool life; order the insert directly via Metav Werkzeuge or consult the technical advisors for holder compatibility. DNMG150408 NS520 Tungaloy indexable insert for turning A DNMG150408 NS520 indexable insert designed for finishing and light turning operations on steel, offering a rhombic geometry and robust chip control. Cermet grade NS520 for finishing ISO DNMG150408 rhombic geometry Double-sided chipbreaker for stable chips Cylindrical hole for secure clamping Superior surface quality through cermet technology The NS520 grade is a cermet developed for finishing to light machining of steel, combining high hot hardness with a metallurgical binder to deliver excellent surface finish and dimensional stability. Cermets produce finer, more uniform wear than standard carbide in low-to-medium cutting speeds, which helps to maintain tolerance and reduce rework. For engineers seeking consistent part quality, the fine-grained cutting edge of this insert reduces the tendency for built-up edge and supports predictable cycle times. ISO compatibility and secure clamping for reliable production The insert follows ISO geometry and is designated DNMG150408, which simplifies integration into standard indexable tooling systems. Key dimensional attributes such as the 15 mm size, 4.76 mm thickness and a cylindrical hole enable reliable seating and repeatable clamping in matched holders. Compatibility is determined by form, clearance, tolerance class, fastening and size; selecting a holder that matches these parameters ensures repeatable positioning and reduces vibration, supporting stable cutting conditions and fewer rejected parts. Stable chip control and longer tool life Equipped with a double-sided chipbreaker, this insert controls chip formation across both indexable edges to promote steady evacuation and reduced risk of chip re-cutting. The chipbreaker geometry, combined with the wear characteristics of the cermet grade, yields consistent wear and predictable edge life in finishing cuts. The result is less downtime for insert changes and more predictable maintenance planning, which benefits batch production and quality-focused operations. Practical selection and process impact The 0° rake angle and a corner radius of 0.8 mm make the insert well suited to finishing feeds that prioritise surface integrity and edge strength. When selecting the chipbreaker and grade, match the NS520 to workpiece material, feed rate and machine stability to exploit its strengths in surface quality and even wear. The complete system comprises the ISO insert, a compatible external holder or boring bar, a shim/clamping set and replacement screws — ensuring that the mechanical stack-up is stable for precision turning. For specific application parameters or holder recommendations, Metav Werkzeuge can provide technical guidance to align insert choice with production goals. Contact Metav Werkzeuge for availability and application advice on Tungaloy DNMG150408 NS520 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to request technical support or procurement assistance. Technical Data Article number: 6803350 Manufacturer SKU: TUN6803350 Our SKU: 6803350-Tungaloy Model series: ISO indexable turning inserts Name: DNMG150408 NS520 Tungaloy insert Material: Cemented carbide Facts ISO code: 150408 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Insert angle: 55° Rake angle: 0° Special features Grade: NS520 (cermet) Double-sided chipbreaker Rhombic insert shape Cylindrical hole for clamping Intended application: Turning (finishing to light machining) System composition: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert intended for? The DNMG150408 NS520 insert is specified for finishing and light machining of steel, with the cermet grade optimised for surface quality and even wear. Is the insert indexable on both sides? Yes; the DNMG150408 is double-sided and can be indexed to present a fresh cutting edge, extending service life and reducing tooling costs. How does the chipbreaker affect performance? The double-sided chipbreaker promotes stable chip formation and evacuation, improving surface finish and reducing the risk of chip-related interruptions during turning. Which holders are compatible with this ISO insert? Compatibility depends on matching the ISO form, clearance, tolerance class, fastening method, size and thickness; use a holder designed for DNMG150408 geometry for secure clamping and repeatable positioning. What does the corner radius of 0.8 mm mean for machining? A 0.8 mm corner radius balances edge strength with the ability to achieve fine surface finishes; it suits finishing feeds while maintaining robustness against minor interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 NS520 Wendeplatten - Tungaloy
Benefit from the combination of precise finishing ability and predictable wear: the DNMG150408 NS520 Tungaloy insert delivers a fine surface finish thanks to its NS520 cermet grade and a controlled 0.8 mm corner radius for accurate profiles; order the inserts directly via Metav Werkzeuge or consult the technical team for application matching. DNMG150408 NS520 Tungaloy — DNMG turning insert, 55° geometry A DNMG150408 NS520 Tungaloy ISO rhombic turning insert designed for finishing and light machining of steel, offering a 55° diamond form and a double-sided chipbreaker for economical indexable use ISO rhombic DNMG 55° cutting geometry NS520 cermet for fine finishing 0.8 mm corner radius for accurate profiles Double-sided chipbreaker, cylindrical hole Consistent finishing performance for turning The NS520 grade is formulated as a cermet option focused on finishing to light machining of steel: its microstructure prioritises a stable cutting edge, resulting in improved surface finish and dimensional accuracy during external and internal turning. Cermet materials combine hard ceramic phases with a metallic binder to deliver wear resistance at lower cutting forces; this means fewer edge changes and more consistent parts over a production run. For users seeking repeatable component quality, the combination of the grade and the insert geometry reduces the need for secondary finishing and lowers scrap rates. Reliable fit and secure clamping for stable machining Built to ISO form and tolerance, the rhombic insert and its 55° cutting geometry ensure compatibility with standard turning holders when the correct holder form, clearance angle and fastening arrangement are observed. The insert’s cylindrical hole and defined thickness (4.76 mm) contribute to repeatable seating and minimal play in the pocket, which reduces vibration and supports longer tool life. Clear information on geometry and tolerance allows the selection of the appropriate external holder or boring bar, so setup time is lowered and machining stability is improved. Productivity gains from economical indexing and predictable wear The double-sided chipbreaker provides two effective cutting edges per indexed face, extending usable life before replacement and reducing cost per cutting edge. A 0.8 mm corner radius offers a balance between strength and profile accuracy, suitable for fine finishing without compromising edge robustness. The insert’s format and chipformer are optimised to produce consistent chips and to lower the risk of built-up edge when machining steel, which helps maintain cycle times and reduces unplanned downtime. Overall, the design supports efficient production workflows and reliable part quality. Contact Metav Werkzeuge for a precise holder compatibility check and to request technical recommendations for integrating the DNMG150408 NS520 Tungaloy inserts into existing turning operations; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering support. Technical data Article number: 6803431 Manufacturer SKU: TUN6803431 Model designation: DNMG150408 NS520 Manufacturer: Tungaloy Material: Hartmetall Grade/coating: NS520 Application: Turning Dimensions & core data Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle / size: 15 mm Cutting angle: 55° Clearance angle: 0° Chipbreaker type: double-sided Plate hole: cylindrical hole Features & compatibility ISO rhombic turning insert Compatible with ISO turning holders and boring bars Suited for finishing to light machining of steel Two usable cutting edges per indexed face Rhombic form for external and internal turning Stable chip control for consistent surface quality FAQ What types of materials is this insert intended for? The DNMG150408 NS520 Tungaloy insert is specified for finishing to light machining of steel, with the NS520 cermet grade tuned for good surface quality and even wear when turning steel. How many cutting edges are available per insert? Each indexable face offers two usable edges due to the double-sided chipbreaker design; the insert can be rotated to present a fresh edge before replacement. What does the 55° geometry mean for my turning process? A 55° rhombic geometry provides a versatile approach for both external and internal turning, enabling controlled cutting forces and good access to workpiece contours compared with larger or smaller included angles. Which holder characteristics are required for correct compatibility? Compatibility depends on holder form, free/clearance angle (0° specified), tolerance class, fastening method, size and plate thickness; verify holder pocket dimensions against the DNMG150408 ISO form to ensure secure seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, economical double-sided use and straightforward holder compatibility for reliable turning operations. Order the insert directly via Metav Werkzeuge or consult our team for process-specific advice. DNMG150408 NS9530 Tungaloy turning insert (finishing) DNMG150408 NS9530 Tungaloy is an ISO-indexed turning insert engineered for fine finishing in steel machining, offering a sharp cermet grade and stable cutting performance. ISO rhombic DNMG profile, 55° cutting angle Uncoated cermet NS9530 for fine finishing Sharp cutting edge for low cutting forces Double-sided chipbreaker with cylindrical hole High-quality finishing for steel components The uncoated cermet NS9530 is formulated as a finishing grade, delivering a sharp cutting edge and low cutting forces that help achieve superior surface quality on steel parts. Optimised for continuous cuts and small depths of cut, this insert promotes consistent surface finish where tight tolerances and smooth finishes are required. The cermet substrate offers wear resistance at finishing speeds while maintaining the edge geometry necessary for delicate passes. Stable geometry and reliable system compatibility The rhombic DNMG geometry with a 55° approach provides a balanced cutting angle for external and internal turning applications. Compatibility with toolholders depends on the insert form, 0° clearance angle, tolerance class, attachment type, nominal 15 mm size and 4.76 mm thickness; correct matching ensures secure clamping and repeatable results. The double-sided chipbreaker and cylindrical hole support economical indexability and stable seating, while the 0.8 mm corner radius is suitable for producing fine edge contours without excessive burr formation. Practical guidance for machinists and production engineers As part of a system comprising an ISO insert, a suitable external holder or boring bar, a shim/clamping set and spare fixing screws, this insert simplifies inventory and tool-change logistics. For best results, pair the grade with stable setups and moderate feeds consistent with finishing passes; continuous cutting is preferred. Inspect seating and clamp integrity before operation and replace the insert when edge wear compromises surface quality. For machining advice or specification matching, technical enquiries are welcomed to ensure the insert fits the holder geometry and application requirements. For precision finishing with Tungaloy’s NS9530 cermet grade and the DNMG150408 geometry, contact Metav Werkzeuge for tailored recommendations and ordering assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998156 SKU: 6998156-Tungaloy Manufacturer SKU: TUN6998156 Model series: ISO-Drehwendeschneidplatten Material: Cermet (uncoated) Facts Corner radius: 0.8 mm Plate size: 15 mm Plate thickness: 4.76 mm Cutting angle: 55° Clearance angle: 0° Special features ISO designation: DNMG150408 Grade: NS9530 (finishing) Double-sided chipbreaker Rhombic plate form With cylindrical hole Suitable for external and internal turning Designed for continuous cuts and small depths of cut FAQ Is this insert suitable for finishing operations on steel? Yes. The DNMG150408 NS9530 Tungaloy insert is a finishing-grade cermet designed for steel machining, offering a sharp edge and low cutting forces for improved surface finish during continuous cutting. Which turning operations are appropriate for this insert? The insert is intended for both external and internal turning tasks; it functions as part of an ISO insert system used with compatible external holders or boring bars. How can compatibility with a toolholder be ensured? Compatibility is determined by the insert form, 0° clearance angle, tolerance class, attachment method, plate size (15 mm) and thickness (4.76 mm); verify holder specification matches the DNMG150408 geometry before use. What are the key geometry and dimension details? Key values include a 0.8 mm corner radius, rhombic DNMG form with a 55° cutting angle, 4.76 mm thickness and a cylindrical centre hole; the insert is double-sided for economical indexing. Is the grade suitable for interrupted cuts or heavy roughing? The NS9530 finishing grade is optimised for continuous cuts and small depths of cut; for heavy roughing or heavily interrupted cuts, a more robust grade would be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of precise finishing performance, low cutting forces and ISO compatibility for reliable turning operations; order the DNMG150408 NS9530 indexable insert via Metav Werkzeuge or consult our specialists for application advice. DNMG 150408 NS9530 Tungaloy indexable insert for turning, 0.8 mm radius The DNMG150408 NS9530 is a finishing indexable insert for turning, designed for continuous cuts in steel and optimised for high surface quality. Cermet finishing grade NS9530 for fine surfaces ISO-standard DNMG150408 with 0.8 mm radius Double-sided chipbreaker; suitable for continuous cuts Increased productivity through low cutting forces and fine finish The uncoated cermet composition of this grade, identified as NS9530, combines a sharp cutting edge with reduced built-up edge tendency, which translates into lower cutting forces and consistent surface quality on steel. For finishing operations where small depths of cut and continuous chips are expected, the geometry delivers stable performance and minimises the need for secondary processing. The result is a measurable improvement in cycle time and less rework on critical parts. Reliable compatibility and predictable clamping behaviour Built to ISO indexable insert dimensions, the DNMG150408 format ensures straightforward compatibility with standard external holders and boring bars; compatibility depends on form, relief angle, tolerance class, pocket attachment, size and thickness. The 0° clearance and rhombic shape provide predictable seating and repeatable positioning; this reduces setup time and enhances reproducibility across batches. Where process stability is essential, the ISO conformity aids tool selection and inventory management. Designed for finishing steel with consistent chip control The insert features a double-sided chipbreaker matched to the cermet grade, engineered for continuous cutting in steel. This combination supports a fine surface finish and low cutting forces, especially at small feed rates. The chip control reduces vibration risk and contributes to longer life of the cutting edge in finishing cycles. For precision components, the improved surface integrity often means fewer downstream inspection rejects. Practical system integration and spare-part clarity As part of the standard ISO insert system, the insert works within a setup of insert, appropriate external holder or boring bar, and the necessary clamp and replacement screws. The presence of a cylindrical hole supports secure fastening; the insert thickness and size match conventional pockets. Clear identification by the ISO code and manufacturer SKU simplifies purchasing and stock rotation for production environments. For tailored advice on integrating the Tungaloy DNMG150408 NS9530 insert into production, contact Metav Werkzeuge for application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998149 SKU: 6998149-Tungaloy Manufacturer article number: 6998149 Facts Insert designation: DNMG150408 ISO code: 150408 Radius: 0.8 mm Thickness: 4.76 mm Size (inscribed circle): 15 mm Relief/clearance angle: 0° Main angle: 55° Hole: with cylindrical hole Special features Material: cemented carbide (cermet) Grade: NS9530 (uncoated cermet finishing grade) Chipbreaker: double-sided Geometry: rhombic Series: ISO indexable turning inserts Typical application: turning (finishing) FAQ What materials is this insert best suited for? The DNMG150408 NS9530 insert is formulated as a finishing cermet and is best suited for steel finishing operations where low cutting forces and high surface quality are required. Does the insert require a special holder? No special holder is required; the insert follows ISO DNMG dimensions and secures in standard external holders or boring bars that accept DNMG150408 inserts. How does the NS9530 grade affect surface finish? The NS9530 grade offers a sharp edge and stable cutting behaviour, which reduces micro-burring and leads to improved surface integrity in continuous finishing cuts. Is the insert supplied coated or uncoated? This specification is an uncoated cermet grade, optimised for finishing rather than heavy roughing operations. What is the benefit of the double-sided chipbreaker? A double-sided chipbreaker allows the insert to be indexed for two usable cutting edges and provides consistent chip control during continuous cuts, promoting stable machining and longer effective tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO-standard rhombic geometry, the NS9530 uncoated cermet finishing grade and a sharp cutting edge for consistently high surface quality; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific guidance. DNMG 150408 NS9530 Tungaloy ISO turning insert for finishing The DNMG 150408 NS9530 is an ISO-standard rhombic turning insert intended for external and internal turning, optimised for finishing cuts in steel and continuous-cut operations ISO rhombic DNMG 150408 geometry NS9530 uncoated cermet finishing grade Low cutting forces and sharp cutting edge Double-sided chipbreaker, cylindrical hole High-quality finishing with reduced cutting forces The NS9530 uncoated cermet grade provides a clearly perceptible benefit for finishing operations: a sharp cutting edge that lowers cutting forces and produces a high surface finish even at small depths of cut. This advantage translates into fewer secondary passes and less need for manual rework, improving overall process efficiency. The morphology of the grade is geared towards continuous cutting, so stability and surface quality remain consistent during long running times. Dependable ISO compatibility for flexible tool choices The ISO-designation ensures the insert fits standard toolholders when the geometric attributes match. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness, so the component is suitable for common clamping systems in modern turning applications. The standardised format simplifies tool management in the workshop and enables rapid replacement, reducing setup times and supporting repeatable machining results. Consistent chip control and secure mounting for uptime Equipped with a double-sided chipbreaker and a cylindrical centre hole, this rhombic insert promotes controlled chip formation and easy indexing. The 0.8 mm corner radius and 0° relief angle contribute to a predictable contact geometry that supports a stable cutting process and reduces the risk of vibration. Secure clamping via the cylindrical hole and standard fastening elements reduces the likelihood of insert movement, helping to maintain surface quality and extend productive cutting time between tool changes. Practical advantages in the workshop and recommended use Designed as a finishing grade for steel, the insert performs best with small feed rates and continuous cuts where high surface integrity is required. The simple system setup — insert, matching outer holder or boring bar, backing/clamping set and spare screws — permits quick replacement and consistent repeatability across batches. Where higher chipload or interrupted cuts are expected, choosing a different breaker or grade is advised; for fine finishing, the combination of geometry and grade delivers measurable improvements in output consistency and part appearance. For precision finishing with Tungaloy’s NS9530 grade, contact Metav Werkzeuge for ordering or tailored technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6998147 SKU: 6998147-Tungaloy Manufacturer SKU: TUN6998147 Model series: ISO-Drehwendeschneidplatten Application: Turning Facts ISO code: 150408 Size: 15 mm Thickness: 4.76 mm Tip radius: 0.8 mm Relief angle: 0° Insert angle: 55° Special features Grade: NS9530 Cutting material: uncoated cermet Double-sided chipbreaker Rhombic plate form Cylindrical centre hole Intended for external and internal finishing turns Compatibility reliant on holder form, clearance angle and tolerance class FAQ Which materials is this grade suited to? The NS9530 grade is formulated as a finishing grade for steel; the DNMG 150408 NS9530 insert is optimised to produce low cutting forces and high surface quality in continuous steel turning. Is the insert indexable and double-sided? Yes, the DNMG 150408 is double-sided with a chipbreaker on both faces and a cylindrical centre hole to allow indexing and secure clamping. What is the corner radius and relief angle of the insert? The insert has a corner radius of 0.8 mm and a relief angle of 0°, which supports fine finishing and predictable contact geometry. How is compatibility with holders ensured? Compatibility depends on matching the ISO geometry, relief angle, tolerance class, fastening method, size and thickness; the insert is intended for standard ISO toolholders when these parameters align. What is the manufacturer SKU and article number for ordering? Ordering reference: article number 6998147, manufacturer SKU TUN6998147; the product is listed as DNMG 150408 NS9530 by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of high finishing quality, stable chip control, and ISO compatibility for efficient turning operations; order directly via Metav Werkzeuge or consult our technical team for application-specific setup. DNMG150408 NS9530 Tungaloy turning insert — ISO-standard finishing grade with uncoated cermet DNMG150408 NS9530 Tungaloy is a rhombic, ISO-design insert engineered for finishing steel components in continuous cutting conditions Rhombic 15 size for precise positioning Uncoated cermet for superior surface finish Double-sided chipbreaker for reliable chips 0° clearance angle for controlled cutting Consistent finishing quality for steel components The NS9530 grade is an uncoated cermet developed for finishing operations on steel, delivering a notably sharp cutting edge and low cutting forces. These properties reduce built-up edge formation and support continuous cutting at small depths of cut, resulting in improved surface finish and reduced rework. The cermet substrate combines wear resistance with a fine edge retention, which is particularly beneficial when the process demands tight dimensional tolerances and consistent part appearance. ISO compatibility and secure clamping for repeatable results Designed as part of the ISO-standard turning insert family, the geometry and tolerances of this rhombic insert ensure compatibility with matching external holders and boring bars. The 15 mm size and 4.76 mm plate thickness, together with the cylindrical hole and specified mounting features, determine fitment and clamping behaviour; attention to holder selection and tolerance class secures repeatable positioning and stable cutting. A 55° nose angle and 0° clearance support controlled chip engagement and predictable cutting forces in well-set tool systems. Stable chip control and process reliability A double-sided chipbreaker integrated into the geometry improves chip formation for continuous cuts, aiding evacuation and protecting the cutting edge during the finishing pass. In combination with the cermet grade’s low cutting resistance, this results in enhanced process stability and fewer interruptions. For best results, match chipbreaker style and grade to the component material and machining parameters to maintain consistent cycle times and surface quality. Practical application notes and setup guidance When assembling the system, pair the insert with an appropriate external holder, a matching shim or clamping set, and replacement screws to maintain correct seat and clamp force. The insert’s design is optimised for turning operations where small depths of cut and continuous feed are common; selecting the correct holder form and tolerance class will preserve the advertised performance. For specific spindle speeds and feed recommendations relevant to the component material, Metav Werkzeuge’s application team can provide tailored advice to maximise tool life and part quality. The article is supplied as an indexable insert suitable for ISO tool systems and designed to enhance finishing productivity. Request application support from Metav Werkzeuge for optimal tool selection and clamping advice based on the Tungaloy NS9530 finishing grade Technical data Article number: 6944656 SKU: 6944656-Tungaloy Manufacturer SKU: TUN6944656 Model series: ISO-Drehwendeschneidplatten Facts ISO designation: DNMG150408 Size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Nose angle: 55° Clearance angle: 0° Special features Material: carbide substrate Grade: NS9530 Coating: uncoated cermet Chipbreaker: double-sided Plate shape: rhombic Hole: with cylindrical hole Application: turning, finishing steel FAQ Which materials is this insert intended for? The NS9530 finishing grade is intended primarily for steel finishing applications; the cermet composition is tuned to provide a sharp edge and high surface quality for continuous cuts. How is compatibility with a toolholder determined? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation DNMG150408 guides selection of matching holders and clamping systems. Does the insert feature a chipbreaker for continuous cuts? Yes, the insert includes a double-sided chipbreaker designed to support predictable chip formation and evacuation during finishing operations. What are the key geometric data to check when ordering? Verify the size (15 mm), plate thickness (4.76 mm), corner radius (0.8 mm), nose angle (55°) and 0° clearance to ensure the insert matches the intended holder and process requirements. Is the insert coated or uncoated? This grade is supplied as an uncoated cermet, offering a fine cutting edge and improved surface finish for finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 NS9530 Wendeplatten - Tungaloy
Benefit from precision finishing and repeatable tool life through the combination of the uncoated NS9530 cermet grade and a rhombic 55° geometry, which lower cutting forces and improve surface quality. Order the insert directly via Metav Werkzeuge or ask our consultants for compatibility and selection support. DNMG150408 NS9530 Tungaloy — ISO turning indexable insert for finishing, rhombic 55° geometry The DNMG150408 NS9530 is an ISO rhombic indexable insert for turning, developed as a finishing grade for steel with a sharp cutting edge and low cutting forces. Sharp cermet cutting edge for high finish Rhombic 55° geometry for stable cuts Double-sided with cylindrical hole for economy Low cutting forces for continuous turning Consistent surface finish for finishing operations The uncoated NS9530 grade delivers a cermet composition that is engineered for low cutting forces and a fine surface finish on steel workpieces. By combining a sharp edge geometry with a modest corner radius of 0.8 mm, the design reduces vibration and promotes continuous cutting regimes, which benefits repeatability and reduces the need for rework. The focus on finishing means fewer passes are required to reach final dimensions, increasing throughput without sacrificing quality. Geometry and clamping compatibility that reduce setup time A rhombic insert form with a 55° approach angle and 0° relief provides a predictable cutting orientation that suits common ISO holders. The insert’s rhombic shape and cylindrical hole permit secure clamping and easy indexing, while the 4.76 mm thickness and 15 mm size ensure mechanical stability during external and internal turning. Clear specifications on shape, size, thickness and hole style simplify holder selection and minimise downtime during tool changes. NS9530 uncoated cermet: lower forces and improved surface integrity As an uncoated cermet finishing grade, NS9530 offers a balance between hardness and edge stability that is beneficial for continuous finishing cuts on steel. The material choice promotes a clean, sharp edge that resists chipping under low feed/high speed conditions and supports improved surface integrity. For shops seeking predictable tool life and excellent part appearance, this finishing insert is optimised for applications where consistent dimensional and visual quality matters. Integration into production for efficient tool use and economy The double-sided construction with a double-sided chipbreaker and a central cylindrical hole extends usable life and reduces per-part tooling cost by allowing indexing. As an ISO-standard insert, it fits standard holders when form, clearance angle, tolerance class, fastening and thickness match, which streamlines inventory management. Where stable chip control and low cutting forces are required, this insert supports reliable, productive turning operations with fewer interruptions. Contact Metav Werkzeuge for tailored selection advice and ordering of Tungaloy finishing inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998158 SKU: 6998158-Tungaloy Manufacturer SKU: TUN6998158 Model series: ISO turning indexable inserts Application: Turning Material: Carbide Facts ISO designation: DNMG150408 Grade: NS9530 Corner radius: 0.8 mm Approach angle: 55° Relief angle: 0° Thickness: 4.76 mm Size: 15 mm Special features Uncoated cermet finishing grade Double-sided chipbreaker Rhombic insert shape Cylindrical hole Compatibility with ISO holders For external and internal turning FAQ What materials is this insert suited for? The DNMG150408 NS9530 Tungaloy insert is specified as a finishing grade primarily for steel, where its uncoated cermet composition provides low cutting forces and a high-quality surface. Can the insert be used in standard ISO holders? Yes. The ISO designation DNMG150408 and the defined thickness, size and hole style allow use in compatible ISO holders when form, clearance and fastening match. How does the NS9530 grade affect machining strategy? NS9530 is an uncoated finishing grade that favours continuous cuts with small depths of cut and moderate speeds to achieve superior surface finish and repeatable dimensional results. Is the insert indexable and economical for production? The double-sided design with a cylindrical hole permits indexing and reuse of both cutting edges, extending tool life and lowering per-part tooling costs. What edge geometry does this insert provide for turning? The insert features a rhombic shape with a 55° approach angle and a 0° relief, supporting stable cutting orientation and easy tool set-up for both external and internal turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp NS9530 cermet cutting grade, ISO-standard geometry and secure clamping for consistent finishing quality and low cutting forces — ideal for continuous external and internal turning. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150408 NS9530 Tungaloy indexable turning insert — Cermet finishing grade, 0° clearance The DNMG150408 NS9530 Tungaloy indexable insert is designed for finishing operations in steel, providing a sharp cutting edge and stable chip control for continuous cuts and small depths of cut. Cermet grade NS9530 for finishing Rhombic DNMG 150408, 0° clearance angle Double-sided chipbreaker for continuous cuts Cylindrical hole for secure clamping Consistent finishing thanks to a sharp cermet grade The combination of a cermet cutting material and a precisely formed edge delivers low cutting forces and excellent surface finish, especially in continuous turning. The uncoated NS9530 grade is optimised as a finishing insert for steel, producing minimal built-up edge and reliable dimensional accuracy. As a result, cycle times can be stable while achieving tight tolerance requirements and reduced rework. ISO compatibility and secure mechanical retention Built to the ISO standard geometry for DNMG inserts, the rhombic shape and 0° clearance angle ensure predictable seat contact and repeatable positioning in compatible toolholders. The insert features a cylindrical hole for positive clamping and a plate thickness of 4.76 mm that matches standard holder pockets. Selection of holders should consider form, clearance, tolerance class, fixing and size to guarantee correct fit and process reliability. Practical benefits in daily turning operations The double-sided chipbreaker design allows indexation and economical use of both faces, extending tool life and reducing tooling costs per component. For finishing of steel, choose modest feeds and shallow depths of cut to exploit the insert’s low cutting forces and sharp edge; this leads to superior part finish and stable results across repeat runs. The Tungaloy grade supports continuous cuts and small material removals, making it suitable for high-quality external and internal turning tasks. Contact Metav Werkzeuge today to request genuine Tungaloy NS9530 finishing inserts or to discuss holder compatibility and cutting parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct technical support and ordering via Metav Werkzeuge Technical data Article number: 6998173 Manufacturer SKU: TUN6998173 SKU: 6998173-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: DNMG150408 NS9530 Tungaloy-Wendeplatte Facts ISO designation: 150408 Corner radius: 0.8 mm Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Included angle: 55° Special features Cutting material: uncoated cermet (NS9530) Shape: rhombic (DNMG) Hole style: cylindrical hole, with hole Chipbreaker: double-sided Typical application: external and internal turning, finishing steel Material (body): Hartmetall FAQ What materials is this insert intended for? The DNMG150408 NS9530 insert is specified as a finishing grade for steel; the cutting grade NS9530 is optimised for continuous cuts and delivering a high surface finish on steel components. How does the DNMG150408 ensure secure clamping? Clamping security is achieved via the cylindrical hole and the ISO-standard geometry; correct holder selection according to form, tolerance and thickness guarantees stable positioning of the DNMG150408 insert. Is the insert coated and what does that mean for cutting parameters? This insert is an uncoated cermet grade (NS9530). Uncoated cermets typically require conservative feeds and depths for finishing to exploit their sharp edge and surface-quality advantages. Can both sides of the insert be used? Yes, the insert features a double-sided chipbreaker, allowing indexation of both cutting edges to extend usable life and reduce tooling costs. Which toolholders are compatible with this insert? Compatibility depends on the holder matching the DNMG form, clearance angle, tolerance class, fixing method, size and thickness; ISO-standard DNMG holders designed for 15 mm size and 4.76 mm thickness are appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the tool is listed as "Hartmetall (carbide)" while the cutting grade is specified as an uncoated cermet (NS9530). Description generation aborted due to conflicting product data; please verify the material and cutting-material fields to ensure that the information provided aligns accurately with the specifications of the tool, as discrepancies in these fields can lead to errors in processing, incorrect product descriptions, or potential issues during application, which may ultimately affect performance, reliability, or customer satisfaction; it is essential to cross-check all relevant details thoroughly before proceeding with further actions or updates to the system.
DNMG 150408 NS9530 Wendeplatten - Tungaloy
Product data inconsistent: one entry lists the tool material as "carbide" while another specifies "uncoated cermet". Please verify the product specifications to ensure accuracy and consistency across all records, as discrepancies in material information can lead to confusion, incorrect usage, or potential issues during application. It is essential to confirm whether the tool is indeed made of carbide or uncoated cermet, as these materials have distinct properties, performance characteristics, and suitability for different tasks. Accurate product data is crucial for maintaining quality standards, customer satisfaction, and operational efficiency, so please review and update the information accordingly to avoid any misunderstandings or errors.
DNMG 150408 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and ISO compatibility for consistent turning performance; order the DNMG150408 NS9530 directly via Metav Werkzeuge or consult our advisors for application-specific support. DNMG 150408 NS9530 Tungaloy Turning Insert — ISO rhombic insert for finishing The DNMG 150408 NS9530 Tungaloy Turning Insert is an ISO‑standard rhombic indexable insert engineered for finishing operations in external and internal turning of steel. Sharp cermet grade NS9530 for fine finishing Low cutting forces for stable continuous cuts ISO DNMG150408 rhombic insert, 55° lead angle Cylindrical hole for secure clamping Consistent surface quality through sharp cermet cutting geometry The uncoated cermet grade NS9530 is formulated for finishing of steel, offering a very sharp cutting edge that reduces ploughing and enables a superior surface finish in light cuts. As a finishing grade, the material provides low cutting forces and stable metal removal during continuous cuts and small depths of cut. The combination of sharp geometry and the fine grain of the insert material helps to achieve reproducible surface roughness values while keeping thermally induced edge dulling to a minimum. Reliable fit and repeatable clamping for process stability Compatibility with holders is defined by form, clearance angle, tolerance class, fastening, size and thickness; the ISO DNMG150408 format guarantees interchangeability across standard turning systems. The rhombic shape with a cylindrical hole ensures secure axial and radial location, while the 55° lead angle balances accessibility and strength. With an insert thickness of 4.76 mm and a nose radius of 0.8 mm, the geometry supports precise profiling and predictable deflection margins for slender setups. Productivity benefits from chip control and predictable behaviour The double‑sided chipbreaker design promotes controlled chip formation in finishing cuts, reducing the risk of long, entangling swarf and helping to maintain uninterrupted machining cycles. Because the grade is uncoated, the initial sharpness of the cutting edge is maximised, which translates into lower feed force requirements and reduced machine vibration for delicate operations. These process attributes contribute to shorter cycle times on finishing passes and consistent part quality in serial production. Practical system guidance and suited applications Designed for integration in a standard turning system—indexable insert, matched external holder or boring bar, backing/clamp set and replacement screws—this insert is best applied where a fine surface finish on steel is the priority. Select the double‑sided chipbreaker and the NS9530 finishing grade when stability is assured and material removal is light; for roughing or interrupted cuts, choose a more robust grade or a dedicated chipbreaker variant. The rhombic profile and 55° lead angle permit efficient approach angles for both external profiling and internal turning operations. For application advice, compatibility checks or to request stock and delivery details for the DNMG 150408 NS9530 from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for personalised consultancy and fast processing. Technical data Article number: 6998168 SKU: 6998168-Tungaloy Manufacturer SKU: TUN6998168 Model series: ISO‑Drehwendeschneidplatten Designation: DNMG150408 NS9530 Tungaloy‑insert Measures / Core data Nose radius: 0.8 mm Lead angle: 55° Insert thickness: 4.76 mm Insert size: 15 mm Design / Special features Uncoated cermet grade NS9530 Rhombic insert shape (DNMG) Cylindrical hole for fastening Double‑sided chipbreaker Compatible with ISO turning holders and boring bars Intended application: finishing of steel Typical system: insert + external holder or boring bar + clamp set + replacement screws FAQ What materials is this insert optimised for? The DNMG 150408 NS9530 is optimised for finishing operations in steel, where sharp edge geometry and low cutting forces are required to achieve high surface quality. Is the insert indexable on both sides? Yes, the insert features a double‑sided chipbreaker design that allows indexing to the next cutting edge, extending usable life before replacement is required. Which holders are compatible with this ISO format? Standard ISO‑compatible DNMG holders and boring bars that accept DNMG150408 inserts will accommodate this format; compatibility depends on form, clearance angle and clamp arrangement. What are the key geometry values to consider for setup? Important geometry values are the nose radius of 0.8 mm, the insert thickness of 4.76 mm and the 55° lead angle, which together influence approach angle, deflection and achievable surface finish. How does the uncoated cermet grade affect performance? The uncoated cermet grade NS9530 provides a very sharp initial edge and low cutting forces, making it well suited to continuous finishing cuts and small depths of cut where surface quality is critical. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com