DNMG 150408 T6215 Wendeplatten - Tungaloy
High wear resistance from the CVD‑coated carbide grade and a 0.8 mm corner radius deliver consistent cutting results in stable to slightly interrupted stainless‑steel turning; the rhombic 55° geometry and double‑sided chipbreaker support versatile ISO tooling systems. Order the DNMG150408 T6215 directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408 T6215 DNMG turning insert by Tungaloy The DNMG150408 T6215 is an ISO‑standard turning insert designed for efficient external and internal turning, optimised for rostfreie Stähle under stable to slightly interrupted cutting conditions. CVD‑coated carbide, grade T6215 Suited for stainless steel turning 55° rhombic insert, 0.8 mm corner radius Double‑sided chipbreaker with central hole Consistent cutting performance for stainless‑steel turning The CVD‑coated carbide grade provides enhanced wear resistance, reducing flank and crater wear in continuous and lightly interrupted cuts. The insert’s geometry — a 55° rhombic shape with a 0.8 mm corner radius — is engineered to balance strength and edge sharpness, offering reliable surface finish while maintaining tool life. For shops machining rostfreie Stähle, this combination helps to manage heat and built‑up edge tendencies, leading to fewer tool changes and more predictable cycle times. Secure mounting and ISO compatibility for productive setups Built to the ISO standard designation DNMG150408, compatibility with holders is governed by form, clearance, tolerance class, fastening method, size and thickness. The central cylindrical hole and standardised dimensions permit straightforward clamping in compatible external holders or boring bars, simplifying tool inventory and reducing setup time. As part of an ISO insert system, the component integrates with common seat and clamp designs, supporting reproducible mounting and stable cutting conditions. Durable grade and coating reduce downtime The insert’s T6215 grade, a CVD‑coated carbide, is selected for its resistance to abrasive wear when machining rostfreie Stähle under stable conditions. The double‑sided chipbreaker extends usable edges per insert and contributes to controlled chip formation, which aids chip evacuation and process consistency. These characteristics translate into fewer interruptions, longer index intervals and an overall reduction in machining cost per part. Application guidance and efficient use of the insert With a plate thickness of 4.76 mm and a 15 mm nominal size, the insert suits a range of holder types and cutting depths for turning operations. The double‑sided design offers economical edge utilisation, while the cylindrical hole ensures concentric clamping and repeatable positioning. Select cutting parameters and a matching chipbreaker variant according to material condition and machine rigidity to maximise surface quality and tool life; the insert is particularly effective in stable or lightly interrupted stainless‑steel turning where edge stability matters most. Contact Metav Werkzeuge for application advice and to source Tungaloy DNMG150408 T6215 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss tooling options and compatibility with existing holders Technical data Article number: 6944655 Manufacturer SKU: TUN6944655 SKU: 6944655-Tungaloy Model series: ISO turning indexable inserts Material: carbide Grade: T6215 (CVD‑coated) Application: Turning Core data Cutting angle: 55° Relief angle: 0° Corner radius: 0.8 mm Insert size: 15 mm Plate thickness: 4.76 mm Article designation: DNMG150408 Features Rhombic plate form Double‑sided chipbreaker Cylindrical central hole ISO‑standard insert compatibility Suited for stainless steel machining For stable to slightly interrupted cuts FAQ What holders are compatible with this insert? The DNMG150408 T6215 is compatible with ISO‑standard external holders and boring bars that accept DNMG‑type rhombic inserts; ensure the holder matches form, tolerance class, fastening method and plate thickness for secure clamping. Which materials is this insert best suited for? This Tungaloy DNMG150408 T6215 insert is designed primarily for rostfreie Stähle (stainless steel) under stable to lightly interrupted conditions, benefiting from the CVD‑coated carbide to resist abrasive wear. How many cutting edges does the insert provide? As a double‑sided DNMG insert, the DNMG150408 T6215 offers multiple indexable edges; the exact count depends on the insert orientation and the indexing pattern used in the holder. What are the key benefits of the T6215 grade? The T6215 grade combines a CVD coating with a wear‑resistant carbide substrate to improve edge life and process stability during stainless‑steel turning with consistent surface results. Is the insert supplied with fixing screws or clamping plates? The supply generally comprises the insert itself; the standard system setup includes a matched external holder, support shim and clamping sets which should be sourced according to the machine‑specific holder requirements. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated T6215 grade for strong wear resistance and the 55° rhombic geometry for versatile turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG150408 T6215 indexable turning insert by Tungaloy — CVD‑coated carbide, 55° rhombic geometry DNMG150408 T6215 is an ISO‑standard indexable insert for external and internal turning, engineered for machining stainless steels under stable to slightly interrupted cutting conditions. CVD‑coated carbide grade T6215 55° rhombic geometry for versatile turning Double‑sided chipbreaker, cylindrical hole 0° clearance, 0.8 mm corner radius Durable grade for consistent stainless steel performance The T6215 grade combines a CVD‑coated carbide substrate with a coating system optimised for machining stainless steels, delivering reliable wear resistance under continuous or lightly interrupted cuts. The formulation supports stable chip formation, which reduces flank wear and helps to maintain cutting edge integrity over longer cycles. In practical terms, this insert is suited to applications where consistent surface finish and tool life are priorities, enabling predictable tool change intervals and fewer process interruptions. Geometry that balances strength and accessibility A 55° rhombic geometry provides an effective compromise between clearance and insert strength, while the 0° clearance and 0.8 mm corner radius support robust edge life when facing moderate radial engagement. The plate thickness of 4.76 mm and the cylindrical hole design ensure secure clamping in compatible carriers, with retention determined by form, relief angle, tolerance class, fastening method, size and thickness. These characteristics make the insert adaptable to a broad range of holders and boring bars within ISO standards. Cost‑efficient edge management and system integration The double‑sided chipbreaker design offers two usable cutting edges per geometric orientation, improving cost efficiency through multiple indexing positions. As an ISO‑standard component, the insert forms part of a system that typically comprises a matching external holder or boring bar, a shim/clamp set and replacement screws; correct assembly preserves repeatable positioning and cutting performance. Selecting an appropriate chipbreaker and grade minimises scrap risk and supports steady throughput. Practical selection advice for turning operations Select the chipbreaker and the T6215 grade according to workpiece stability and the specific stainless steel grade being machined; the insert performs best under stable to lightly interrupted conditions rather than severe interruptions. For less stable setups, reducing depth of cut or choosing a geometry with greater edge support is recommended. If clarification is needed regarding holder compatibility, clamping orientation or optimal cutting parameters, Metav Werkzeuge can provide application‑oriented recommendations tailored to the machining environment and component requirements. For reliable stainless steel turning with Tungaloy’s T6215 grade, contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944632 SKU: 6944632-Tungaloy Manufacturer SKU: TUN6944632 Model series: ISO‑Drehwendeschneidplatten Material: Carbide (CVD‑coated) Facts Plate designation: DNMG150408 Grade: T6215 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Cutting angle: 55° Special features Rhombic plate form Cylindrical hole for secure clamping Double‑sided chipbreaker ISO‑standard indexable insert for turning Suitable for external and internal turning FAQ What materials is this insert suitable for? The DNMG150408 T6215 insert is specified for machining stainless steels; the CVD‑coated carbide grade T6215 is formulated for wear resistance under stable to lightly interrupted conditions. How many usable cutting edges does the insert offer? The DNMG150408 T6215 insert features a double‑sided chipbreaker, providing multiple indexable cutting positions to extend overall edge life. Which holder features affect compatibility with this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; ensure the carrier matches the ISO geometry of the DNMG150408 insert for correct seating. Is the insert suitable for internal turning? Yes, the DNMG150408 T6215 is designed for both external and internal turning applications when used with an appropriate boring bar or holder. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150408 T6215 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide and a robust double-sided chipbreaker for consistent turning of stainless steel under stable to slightly interrupted conditions; order directly via Metav Werkzeuge or request application advice from our consultants. DNMG150408 T6215 DNMG — Turning insert for stainless steel by Tungaloy DNMG150408 T6215 is an ISO-standard rhombic turning insert designed for general external and internal turning of stainless steels under stable to lightly interrupted cutting conditions CVD-coated carbide for high wear resistance Rhombic 55° geometry for versatile turning Double-sided chipbreaker for controlled chips 0.8 mm corner radius for stronger cutting edges High wear resistance for consistent stainless-steel turning The CVD-coated carbide grade delivers elevated wear resistance and thermal stability specifically tuned for machining stainless steel in consistent setups. The coating reduces flank and crater wear under continuous cutting, so the insert maintains dimensional stability over longer tool life. Select the appropriate chipbreaker and grade based on workpiece material and the rigidity of the setup to achieve reproducible results and minimise unplanned stops. Geometry that supports repeatable surface quality and tool life A 55° rhombic form with a 0° clearance and a 0.8 mm radius concentrates cutting forces into a stable edge geometry. The thicker body (4.76 mm) and the cylindrical hole secure the insert in the pocket and reduce vibration transmission, improving surface finish and extending edge life. These design choices improve resistance to chipping while offering versatility for both external and internal turning operations. Controlled chip formation and economical operation The double-sided chipbreaker promotes predictable chip formation and evacuation, which eases coolant and chip-management demands on the machine. Using a two-sided insert effectively doubles the available cutting edges before indexing is required, supporting economical operation without compromising process stability. The combination of chip control and the CVD coating helps to reduce downtime and tooling cost per part in production runs. ISO compatibility and straightforward system integration As part of the ISO insert family, this item integrates into standard toolholder systems where compatibility is defined by shape, clearance, tolerance class, attachment style, size and thickness. Typical system components include the ISO insert, a matching external holder or boring bar, a clamping set, and replacement screws. For complex applications or transition to new materials, technical advice is available to confirm holder selection and clamping torque to maintain secure seating and consistent cutting results. If there is uncertainty about process parameters or holder matching, the technical team can provide guidance or specific recommendations via email or phone. Contact Metav Werkzeuge for tailored advice and to arrange supply of Tungaloy DNMG150408 T6215 turning inserts through their application specialists Technical data Article number: 6944586 Manufacturer SKU: TUN6944586 Supplier SKU: 6944586-Tungaloy Brand: Tungaloy Data Geometry / ISO designation: DNMG150408 / 150408 Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Lead/approach angle: 55° Clearance angle: 0° Special features Material: Carbide Coating / grade: T6215, CVD-coated Plate shape: Rhombic Hole: With cylindrical hole Chipbreaker: Double-sided Application: Turning (external and internal) FAQ Which materials is this grade intended for? The T6215 grade is a CVD-coated carbide designed for machining stainless steel under stable to slightly interrupted cutting conditions. What are the key dimensions and geometry of the insert? The DNMG150408 insert has a 15 mm size, 4.76 mm thickness, 0.8 mm corner radius and a 55° rhombic form. Is the insert compatible with standard ISO holders? Yes, the insert is ISO-standard; holder compatibility is governed by shape, clearance angle, tolerance class, attachment, size and thickness and should be verified against the chosen holder. How does the chipbreaker affect machining? The double-sided chipbreaker promotes controlled chip formation and evacuation, improving machining stability and reducing the risk of chip-related interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T6215 Wendeplatten - Tungaloy
Robust CVD-coated carbide in a DNMG geometry combined with a 0° relief angle and a 0.8 mm corner radius delivers consistent performance when machining stainless steels under stable to lightly interrupted conditions; the rhombic 15 mm plate, 4.76 mm thickness and cylindrical hole ensure secure clamping and ISO compatibility. Order the DNMG150408 T6215 Tungaloy indexable insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150408 T6215 Tungaloy turning insert — CVD-coated carbide, 55° geometry The DNMG150408 T6215 Tungaloy turning insert is an ISO-standard rhombic indexable insert designed for external and internal turning of stainless steels, offering wear-resistant cutting performance in stable machining setups. CVD-coated carbide grade T6215 for wear resistance ISO DNMG150408 geometry, 55° cutting angle Rhombic 15 mm plate with 0.8 mm corner radius Double-sided chipbreaker and cylindrical hole Consistent wear resistance for stainless-steel turning The CVD-coated carbide grade T6215 provides a balanced combination of wear protection and edge stability, making the insert well suited to turning stainless steels in stable to slightly interrupted cuts. The coating reduces flank wear and helps maintain surface quality over multiple edge lives, which lowers the cost per component. Compatibility is governed by form, relief angle, tolerance class, fastening method, size and thickness; matching the insert to the correct ISO holder ensures secure clamping and repeatable results. System-friendly geometry that simplifies changeovers With a rhombic 15 mm format, a plate thickness of 4.76 mm and a cylindrical hole, the insert integrates easily into standard ISO turning systems. The double-sided chipbreaker provides two usable cutting edges per side, extending service intervals and improving stock utilisation. The 55° cutting angle and 0.8 mm corner radius support a compromise between strength and finish: the radius helps protect the cutting edge during interrupted cuts while contributing to a consistent surface finish on the workpiece. Process gains through predictable chip control and edge life Good chip control from the selected chipbreaker and the robust substrate reduces machining interruptions and cleaning effort, which directly benefits throughput and machine utilisation. Using this ISO-configured insert with an appropriate holder and clamping set improves positional repeatability and minimises the risk of runout-related tool damage. For practical selection, consider the combination of chipbreaker style and grade when moving between light finishing and heavier turning operations; the balanced properties of this insert contribute to stable machining and reliable results. Contact Metav Werkzeuge for tailored recommendations on Tungaloy inserts and application parameters — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical Data Article number: 6944579 Manufacturer SKU: TUN6944579 Manufacturer article number: 6944579 Facts Plate size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 0° Hole style: cylindrical hole Special features Material: carbide Coating: CVD Grade: T6215 Geometry: rhombic, DNMG150408 Chipbreaker: double-sided Application: external and internal turning of stainless steels FAQ What materials is this insert suitable for? The DNMG150408 T6215 Tungaloy insert is specified for machining stainless steels under stable to lightly interrupted cutting conditions and performs best when matched with the correct chipbreaker and holder. How does the T6215 grade affect tool life? The T6215 CVD-coated grade offers enhanced wear resistance and edge protection compared with uncoated substrates, which helps to extend edge life and maintain consistent surface finish during turning. Which holders are compatible with this insert? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; use an ISO DNMG-compatible external or internal turning holder with the correct clamp or screw to secure the insert. How many cutting edges are available per insert? The rhombic, double-sided design provides multiple usable edges; once a cutting edge reaches wear limits, the insert can be indexed to present the next usable edge. Is this insert suitable for interrupted cuts? Yes — the carbide substrate and the 0.8 mm corner radius give the insert sufficient robustness for lightly interrupted cuts, but heavily interrupted or unstable setups may require a different geometry or a more robust grade. What is the purpose of the cylindrical hole? The cylindrical hole ensures secure axial and radial location in the clamp seat, improving repeatability and reducing the risk of movement under load. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated carbide grade (T6215) combined with the ISO DNMG150408 form to ensure consistent tool life and process stability when turning rostfreier Stahl; compatibility with ISO holders and a double‑sided design reduces inventory and increases uptime. Order the insert directly via Metav Werkzeuge or request specialist advice from the consultancy team. DNMG 150408 T6215 turning insert by Tungaloy — CVD‑coated carbide for rostfreier Stahl The DNMG150408 T6215 is an ISO‑standard indexable turning insert engineered for external and internal turning operations, designed to perform under stable to lightly interrupted cutting conditions. CVD‑coated wear‑resistant grade T6215 Optimised for rostfreier Stahl machining Rhombic DNMG form with 55° cutting angle Double‑sided insert with cylindrical locating hole Consistent wear resistance for stable rostfreier Stahl machining The CVD‑coated Hartmetall grade T6215 delivers predictable wear performance in medium‑to‑high abrasion situations, making it particularly suited to machining rostfreier Stahl under steady or slightly interrupted cuts. The CVD‑coated carbide layer increases hardness and hot‑hardness at the cutting edge, which translates into longer tool life and fewer index changes. Choosing this grade reduces process variance and supports reliable batch production where surface finish and repeatability matter. ISO conformity simplifies tool selection and system integration Built to the ISO DNMG150408 specification, the insert’s rhombic form and dimensional standards ensure compatibility with a wide range of holders and boring bars. The defined parameters — form, relief, tolerance class, fastening and thickness — allow straightforward identification of suitable toolholders, reducing setup time. The insert’s 0° relief angle, cylindrical locating hole and standard thickness of 4.76 mm enable secure clamping and reproducible positioning, which support consistent cutting conditions and reduce the risk of chatter in stable set‑ups. Productivity and surface quality through geometry and chip control The double‑sided geometry and integrated double‑sided chipbreaker deliver economical stock usage while offering reliable chip formation across different feed values. The 55° cutting angle and a corner radius of 0.8 mm balance edge strength and achievable surface finish, making the insert suitable for finishing and medium machining passes. By selecting an appropriate chipbreaker and matching the cutter grade to workpiece stability, operators can improve machining rates and achieve better surface integrity with fewer tool changes. For technical advice on integrating Tungaloy’s T6215 DNMG150408 inserts into production workflows or to secure supply from Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holders and application parameters. Technical data Article number: 6875560 Manufacturer SKU: TUN6875560 SKU: 6875560-Tungaloy Name: DNMG150408 T6215 Tungaloy turning insert Material: Hartmetall Facts Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 0° Thickness: 4.76 mm Plate size: 15 mm Special features ISO designation DNMG150408 CVD‑coated carbide (grade T6215) Double‑sided chipbreaker Rhombic plate form Cylindrical locating hole Application: Turning (external and internal) Suitable for rostfreier Stahl machining FAQ What materials is this insert best suited for? The DNMG150408 T6215 insert is formulated for machining rostfreier Stahl; the CVD coating and grade selection provide enhanced wear resistance for such alloys. How does the DNMG form affect application choice? The rhombic DNMG form with a 55° cutting angle offers versatility for both external and internal turning; the geometry supports good edge strength and accessible approach angles for standard turning operations. Is this insert compatible with standard ISO toolholders? Yes, the DNMG150408 designation is ISO‑standard; compatibility is determined by form, relief, tolerance, fastening, size and thickness, so matching the holder to DNMG dimensions ensures secure clamping. Can the insert be used for interrupted cuts? The T6215 grade is intended for stable to lightly interrupted conditions; for heavy interruptions, evaluate stability and consider alternative geometries or grades. How does the double‑sided design benefit inventory and uptime? A double‑sided insert provides two usable edges, halving the number of inserts required for the same number of edge changes and reducing stocking complexity while improving machine availability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade and the ISO‑standard geometry to increase process stability and extend tool life in turning operations; order directly via Metav Werkzeuge or request technical advice for optimal holder matching. DNMG150408 T6215 ISO turning insert for turning by Tungaloy A DNMG150408 T6215 insert designed for stable to lightly interrupted turning of stainless steels, providing high wear resistance and consistent chip control in ISO‑compliant tool systems. CVD‑coated carbide for extended tool life Rhombic form with 0° clearance angle Double‑sided chipbreaker for controlled chips Longer, more reliable life through optimised grade and coating The T6215 grade is supplied as a CVD‑coated carbide, a combination that increases resistance against built‑up edge and abrasive wear when machining stainless steels under stable or lightly interrupted conditions. The coating layer reduces flank and crater wear, which translates into longer tool life and fewer insert changes, improving uptime and lowering cost per component. This makes the insert especially suitable where repeatable performance and predictable tool replacement intervals matter. Consistent chip control and surface quality for efficient finishing A double‑sided chipbreaker integrated into the geometry promotes controlled chip formation and evacuation, reducing the risk of entanglement and tool damage. The rhombic shape and 0° clearance angle support small‑depth finishing passes, while the 0.8 mm corner radius helps achieve a stable cutting edge for improved surface finish. Together these features aid in delivering reliable part quality with fewer rework cycles. Seamless integration with ISO tool systems to save setup time Manufactured to ISO dimensions, the insert is compatible with standard external holders when matched for form, clearance, tolerance class, fastening and thickness. The cylindrical hole enables secure screw clamping and simple replacement without special adapters. As part of a complete system—insert, matching holder, shim and clamping set—the component supports rapid changes and repeatable positioning, which reduces machine downtime and simplifies inventory management. Practical machining advice and explanation of key terms For best results with this grade, maintain a stable setup and select cutting parameters suited to stainless steels, avoiding excessive interruptions when possible. CVD stands for chemical vapour deposition, a process that applies a hard, wear‑resistant coating to the carbide substrate to enhance oxidation and abrasion resistance at machining temperatures. Select the chipbreaker and cutter geometry according to workpiece stability and desired surface finish for optimal productivity. For high‑reliability turning of stainless steels, request Tungaloy’s DNMG150408 T6215 inserts from Metav Werkzeuge and consult our technical team via info@metav-werkzeuge.com or +49 2822 7131930 to ensure the correct holder and clamping set are selected Technical data Article number: 6944721 Manufacturer SKU: TUN6944721 Internal SKU: 6944721-Tungaloy Facts Corner radius: 0.8 mm Insert size: 15 mm Thickness: 4.76 mm Included angle: 55° Clearance angle: 0° Special features Material: carbide Coating: CVD Shape: rhombic Hole style: cylindrical hole Chipbreaker: double‑sided Series: ISO turning inserts Application: turning Brand: Tungaloy FAQ What materials is this insert suitable for? The DNMG150408 T6215 insert is designed primarily for machining stainless steels and offers enhanced wear resistance for stable to lightly interrupted turning operations. How does the T6215 grade differ from general‑purpose grades? T6215 is a CVD‑coated carbide grade optimised for wear resistance at the elevated temperatures encountered when turning stainless steels, providing longer life than uncoated or less temperature‑resistant grades. Is the insert compatible with common ISO holders? Yes. The insert follows ISO dimensions; compatibility depends on matching form, clearance angle, tolerance class, fastening and thickness with the chosen external holder and clamping set. What is the effect of the 0.8 mm corner radius on machining? A 0.8 mm corner radius offers a compromise between tool strength and edge form for improved surface finish and reduced risk of chipping during finishing passes. Can the insert be clamped with standard screws? The insert features a cylindrical hole for screw clamping; standard ISO clamping screws and shims for DNMG‑type inserts are typically applicable when the holder is specified accordingly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide and the double-sided chipbreaker for reliable, long-lasting performance in rostfreier Stahl turning; the combination of robust wear resistance, economical double-sided indexing and a precise r0.8 corner delivers consistent surface quality and process stability — order the insert directly via Metav Werkzeuge or consult our technical team for application advice. DNMG 150408 T6215 Turning Insert DNMG — Tungaloy A DNMG150408 T6215 indexable turning insert engineered for stable external and internal turning of rostfreier Stahl under steady to lightly interrupted cutting conditions CVD-coated carbide for wear resistance Optimised for rostfreier Stahl machining Double-sided chipbreaker for cost efficiency Rhombic 55° geometry with r0.8 Consistent wear performance for demanding rostfreier Stahl operations The combination of a CVD coating and a wear-resistant carbide substrate provides measurable improvement in tool life when machining rostfreier Stahl. Under stable cutting conditions the coated grade reduces flank wear and retains edge integrity, which leads to fewer interruptions for insert changes and a higher overall tool life. The double-sided design multiplies usable edges, improving cost-efficiency per cutting edge while maintaining cutting stability and repeatable results for series production. Precise geometry and secure clamping for predictable results With a rhombic 55° insert geometry and a corner radius of 0.8 mm, the geometry supports medium-duty finishing and semi-finishing passes that demand a reliable surface finish. The 0° clearance angle and 4.76 mm thickness contribute to secure seating in the holder; the cylindrical hole ensures consistent positioning and clamp engagement. The ISO designation 150408 aligns the insert with standard holders, making selection based on form, clearance angle, tolerance, fixation and thickness straightforward in a systematic tooling setup. Practical selection guidance and process benefits Choosing the appropriate chipbreaker and grade from the ISO series helps to match component material, cutting method and system rigidity. For rostfreier Stahl the T6215 grade delivers stable chip control and resistance to built-up edge under consistent feed and speed regimes. Using a matched insert, holder and backing plate combination reduces vibration and improves surface quality, helping to lower rework rates and increasing first-pass yield. For supplementary technical data and cutting-parameter recommendations, Metav Werkzeuge can provide documented feed and speed windows tailored to machine capability. For optimised rostfreier Stahl turning performance with a proven Tungaloy solution, contact Metav Werkzeuge to discuss the DNMG 150408 T6215 insert and secure the suitable insert–holder combination. Technical data Article number: 6875486 Manufacturer SKU: TUN6875486 Label: DNMG150408 T6215 Tungaloy-Wendeplatte Facts Geometry angle: 55° Corner radius: 0.8 mm Thickness: 4.76 mm Size: 15 Special features Material: carbide Coating: CVD Chipbreaker: double-sided Hole: cylindrical Shape: rhombic ISO designation: 150408 Application: turning; suitable for rostfreier Stahl FAQ What materials is this insert intended for? The DNMG150408 T6215 insert is designed primarily for machining rostfreier Stahl; the T6215 grade offers wear resistance suited to stable to lightly interrupted turning. How does the double-sided chipbreaker affect productivity? A double-sided chipbreaker doubles the number of usable cutting edges per insert, improving cost-efficiency and maintaining chip control for consistent machining with the Tungaloy DNMG indexable inserts. Which holder features ensure compatibility with this insert? Compatibility is determined by insert form, clearance angle, tolerance class, fixation method, size and thickness; the DNMG shape and cylindrical hole align with ISO-standard external turning holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T6215 Wendeplatten - Tungaloy
The combination of CVD‑coated carbide grade T6215, a rhombic DNMG geometry and a double‑sided chipbreaker delivers reliable wear resistance and predictable tool life in turning operations; this supports stable production and efficient changeovers. Order the DNMG150408 T6215 turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150408 T6215 turning insert for turning — Tungaloy DNMG150408 T6215 is an ISO‑normed indexable turning insert for external and internal turning, optimised for machining rostfreier Stahl under stable to slightly interrupted cutting conditions. DNMG 150408 rhombic geometry CVD-coated carbide T6215 for wear resistance Double-sided chipbreaker for stable cuts Cylindrical hole for secure clamping High wear resistance for rostfreier Stahl with predictable tool life The insert’s CVD‑coated carbide composition (grade T6215) provides a hard, wear‑resistant surface that reduces flank and crater wear when machining rostfreier Stahl. The coating increases thermal and chemical resistance at the cutting edge, which means longer intervals between indexings and fewer tool changes. For production planners this translates into consistent part quality and lower downtime, since the insert resists adhesion and notch formation common with corrosion‑resistant alloys. Stable cutting performance through geometry and chip control The rhombic DNMG geometry combined with a double‑sided chipbreaker gives predictable chip shape and evacuation in a wide range of cutting parameters. The insert’s neutral 0° clearance angle and 55° included angle ensure reliable engagement with both external and internal contours. The result is improved surface finish and reduced vibration in stable setups, allowing higher feed rates or slightly interrupted cuts without compromising dimensional accuracy. Compatibility and secure mounting for repeatable setups Compatibility with holders is determined by form, clearance angle, tolerance class, fastening, size and thickness; this insert is ISO‑specification compliant to simplify selection. The cylindrical hole provides a secure clamping interface with standard screw and clamp systems, promoting repeatable seating and concentricity. For machine shops this means straightforward interchangeability between holders and predictable runout, which aids in maintaining tolerances on turned parts. Economical machining and process reliability Using a wear‑resistant grade such as T6215 reduces total tool consumption across batch production. The double‑sided design effectively doubles usable edges per insert, while the robust cutting ceramic layer supports longer tool life in serial turning. Combined, these aspects contribute to improved process economy: fewer tool purchases per component produced and steadier spindle utilisation. Where high uptime and reproducible quality matter, the insert supports a leaner tooling stock and simplified inventory. Practical application guidance for setup and selection For best results select an appropriate chipbreaker and grade pairing aligned to material condition and stability of the setup: a more aggressive chipbreaker may be suitable for stable workholding; a gentler form helps when interruption occurs. Inspect holder geometry and ensure axial and radial support for the insert; correct clamping torque and a clean seating surface reduce the risk of premature failure. When replacing inserts, track edge life to refine cutting data and achieve consistent surface finish and dimensional control. Contact Metav Werkzeuge for ordering and tailored technical advice on integrating the Tungaloy DNMG150408 T6215 turning insert into production — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical Data Article number: 6944601 Manufacturer SKU: TUN6944601 Shop SKU: 6944601-Tungaloy Series: ISO turning inserts Facts Insert designation: DNMG150408 Grade / coating: T6215 (CVD‑coated) Material: Carbide Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 55° Hole: cylindrical hole Special features Rhombic insert shape Double-sided chipbreaker ISO‑norm compatibility for holders Suited for rostfreier Stahl turning Suitable for external and internal turning FAQ What applications suit this insert best? The DNMG150408 T6215 Tungaloy turning insert is designed for external and internal turning, particularly when machining rostfreier Stahl under stable to lightly interrupted conditions. Which materials can be machined with this grade? Grade T6215 with CVD coating is optimised for rostfreier Stahl and performs well where abrasion and heat resistance at the edge are required. How is compatibility with toolholders ensured? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the insert follows ISO standards to simplify matching with holders. Is the insert single‑ or double‑sided and how is it clamped? This DNMG insert is double‑sided and features a cylindrical hole for secure clamping with standard screws and clamps. What benefits does the T6215 coating provide? The CVD coating on grade T6215 increases thermal and chemical resistance at the cutting edge, improving wear life and reducing adhesive wear on rostfreier Stahl. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150408 T6215 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide and a precise 0.8 mm corner radius that delivers consistent wear resistance and predictable performance in stainless-steel turning; order directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. DNMG150408 T6215 — ISO turning insert for stainless-steel turning (Tungaloy) DNMG150408 T6215 is an ISO-form indexable insert designed for stable to slightly interrupted turning of stainless steel, offering a CVD-coated carbide grade optimised for wear resistance and steady tool life CVD-coated carbide grade T6215 For stainless steel machining 0.8 mm corner radius for fine finishing 55° rhombic geometry, ISO DNMG form Increased productivity for stainless‑steel turning The CVD-coated carbide grade T6215 provides a balance of wear resistance and reliable cutting-edge stability, making it suitable for continuous and lightly interrupted turning of stainless steel. The coating reduces flank wear under typical turning conditions, which translates into longer tool life and fewer indexings per part — a direct contribution to higher process efficiency. For shops seeking reproducible results, the combination of a robust substrate and sophisticated coating helps maintain dimensional consistency and surface finish while lowering overall tooling costs. Geometry that improves surface finish and chip behaviour The 55° rhombic geometry with a 0.8 mm corner radius yields a positive cutting action that is particularly effective for finishing and medium-feed operations. The integrated double-sided chipbreaker ensures controlled fragmentation and evacuation of chips, reducing the risk of built-up edge and improving surface quality. For readers unfamiliar with chipformers: these are small, machined topographies on the insert face that direct and break the chip into shorter, safer segments — essential when machining ductile alloys like stainless steel where long chips can disrupt production. Easy integration into standard toolholders and reduced downtime Manufactured to ISO dimensions, the ISO DNMG150408 form fits a wide range of external holders and boring bars when the holder’s form, relief angle, tolerance class, fastening method, size and thickness are matched. The insert’s 4.76 mm thickness and with cylindrical hole design permit secure clamping and simple indexing; being double-sided, the insert effectively doubles the number of usable edges compared with single-sided types, minimising changeover frequency and maintaining spindle uptime. Compatibility notes in the technical literature explain how holder selection influences cutting parameters and achieve repeatable clamping accuracy. Reliable choice backed by material and brand engineering Tungaloy’s approach to grade development focuses on consistent performance and predictable wear progression, which supports stable production runs and simpler process planning. The insert’s CVD-coated surface and carbide substrate are engineered for repeatable results and straightforward edge preparation. For shops aiming to balance tool life and surface integrity, this insert offers a pragmatic option that pairs well with standard coolant strategies and proven machining parameters to enhance overall throughput and part quality. For ordering, application advice or to check tooling compatibility with Tungaloy CVD grades, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised consultancy and supply options Technical Data Article number: 6875525 Manufacturer SKU: TUN6875525 Model series: ISO turning inserts Name: DNMG150408 T6215 Tungaloy insert Facts Corner radius: 0.8 mm Insert size: 15 (ISO designation 150408) Plate thickness: 4.76 mm Relief angle / form: 55° Hole: with cylindrical hole Special features Material: carbide Coating / grade: CVD-coated, T6215 Geometry: rhombic, DNMG form Chipbreaker: double-sided Application: turning of stainless steel Typical use: external and internal turning; stable to slightly interrupted cuts Compatibility: determined by holder form, relief angle, tolerance class, fastening, size and thickness FAQ What steels is this insert suitable for? The Tungaloy DNMG150408 T6215 insert is specified for machining stainless steel under stable to lightly interrupted conditions and performs best when paired with appropriate feeds and speeds. How does the chipbreaker affect machining? The double-sided chipbreaker on this indexable insert promotes shorter, controlled chips and improved evacuation, which helps maintain surface finish and reduces the risk of chip entanglement in turning operations. Can the insert be used in standard DNMG holders? Yes — the insert conforms to ISO DNMG dimensions; compatibility depends on matching holder form, relief angle, tolerance class, fastening, size and thickness to ensure secure clamping and correct cutting geometry. How many cutting edges are available per insert? Being double-sided, the insert offers multiple usable edges before replacement; this reduces downtime and improves cost-efficiency compared with single-sided alternatives. Is the grade suitable for interrupted cuts? The CVD-coated T6215 grade is intended for stable to slightly interrupted cutting; heavy interruptions may require a different grade or thicker geometry for optimal performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T6215 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant CVD coating and the economical double‑sided design for steady production. The robust rhombic geometry and secure clamping (cylindrical hole) deliver consistent surface quality and low downtime — order directly via Metav Werkzeuge or consult the technical team for application matching. DNMG150408 T6215 DNMG indexable insert — CVD-coated carbide for turning (Tungaloy) DNMG150408 T6215 is an ISO‑format indexable insert for turning, designed for stable to lightly interrupted machining of rostfreier Stahl and similar alloys. CVD-coated carbide for rostfreier Stahl Rhombic DNMG 15 × 4.76 with 55° lead angle Double-sided chipbreaker, with cylindrical hole Grade T6215 for high wear resistance Consistent machining performance for rostfreier Stahl The CVD-coated grade T6215 is tailored for demanding turning applications on rostfreier Stahl, offering enhanced wear resistance and predictable flank wear progression. The rhombic geometry with a 55° lead angle provides a versatile compromise between edge strength and accessibility, while the 0° relief angle supports finish integrity on external and internal turns. In practice, the coated carbide surface reduces built-up edge and extends tool life under steady cutting conditions; choosing the matching chipbreaker preserves chip control and protects the cutting edge during light interruptions. Economy and uptime through reversible edges and secure mounting This ISO‑format insert is double‑sided, enabling indexable use and reducing tooling cost per edge; the central cylindrical hole supports positive clamping and repeatable seating in compatible holders. The DNMG150408 form and the standardised size and thickness (15 mm × 4.76 mm) simplify holder selection and replacement, which lowers changeover time and minimises production interruption. Documentation of holder compatibility should consider shape, relief angle, tolerance class, fastening type and thickness to ensure consistent clamping and repeatability. Process reliability and selection guidance for shopfloor optimisation Selecting the correct chipbreaker and grade is decisive for surface finish and cycle time; the T6215 grade suits stable to slightly interrupted turning where strong edge retention and consistent life are priorities. The insert’s 0.8 mm corner radius balances edge strength with achievable workpiece finish; a larger radius increases stability, a smaller radius improves contour fidelity. For higher cutting speeds or different workpiece materials, match machining parameters and consider feed and depth to maintain chip form and minimise tool wear. For complex requirements, consult technical documentation or request tailored recommendations. For reliable, production‑ready inserts and application advice on Tungaloy DNMG150408 T6215, contact Metav Werkzeuge — email info@metav-werkzeuge.com or phone +49 2822 7131930 for ordering and consultancy Technical data Article number: 6944674 Manufacturer SKU: TUN6944674 Internal SKU: 6944674-Tungaloy Designation: DNMG150408 T6215 Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Lead angle: 55° Hole: with cylindrical hole Special features Material: carbide Coating/grade: T6215 (CVD-coated) Plate form: rhombic (DNMG) Chipbreaker: double-sided Intended application: turning Typical system: ISO indexable insert with matching holder, clamp and screws Typical use: rostfreier Stahl under stable to lightly interrupted conditions FAQ What materials is this insert suitable for? The DNMG150408 T6215 insert is designed primarily for rostfreier Stahl; the T6215 CVD coating enhances wear resistance for stainless applications and similar alloys. How is the insert secured in the holder? The insert features a cylindrical hole for positive clamping; compatibility depends on holder form, fastening method, size and thickness matching the ISO DNMG specification. How many usable edges does the insert provide? This rhombic DNMG indexable insert is double‑sided, offering two effective cutting edges per side and economical indexing to extend service life. Is the grade suitable for interrupted cuts? The T6215 grade performs best under stable to lightly interrupted conditions; for heavy interruptions, a tougher geometry or different grade should be considered. Can the insert improve cycle times or surface finish? Selecting the correct corner radius and chipbreaker with the T6215 grade supports improved surface finish and consistent tool life, which can indirectly contribute to more reliable cycle times. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated T6215 carbide grade and a 55° ISO DNMG geometry to achieve stable, repeatable turning of rostfreier Stahl; compatibility with standard holders and a double-sided chipbreaker makes this a cost-effective choice for both steady and slightly interrupted cuts. Order directly via Metav Werkzeuge or consult the team for application-specific recommendations. DNMG 150408 T6215 turning insert by Tungaloy — ISO rhombic insert for turning The DNMG150408 T6215 is an ISO-standard indexable insert designed for external and internal turning, optimised for rostfreier Stahl under stable to lightly interrupted cutting conditions ISO DNMG150408 geometry, 55° included angle CVD-coated carbide grade T6215 for rostfreier Stahl Double-sided chipbreaker for stable cutting Cylindrical hole mounting, 4.76 mm plate thickness Higher productivity through reliable coating and grade The combination of a CVD-coated surface and the T6215 carbide composition delivers improved wear resistance and consistent edge life during serial turning operations. For workshops seeking predictable tool change intervals, this grade reduces downtime by maintaining cutting-edge stability in rostfreier Stahl machining. The coating also enhances heat resistance, which is beneficial when raising cutting speeds to increase throughput without compromising component quality. Secure clamping and repeatable geometry for consistent parts The ISO DNMG geometry with a 55° included angle and a 0.8 mm corner radius supports predictable chip flow and dimensional control. The insert’s cylindrical hole and standard plate thickness (4.76 mm) enable secure mounting in compatible holders, so clamping repeatability is high and part-to-part variation is minimised. For production environments this means fewer setting adjustments and more consistent surface finish and tolerance adherence. Clear guidance on chip control and cutting conditions Featuring a double-sided chipbreaker, the insert offers two indexable cutting edges per side, extending usable life and reducing running costs. A chipbreaker shapes and evacuates chips to prevent re-cutting and avoid surface damage; selecting the correct chipbreaker and cutting parameters is essential for optimal performance. In less stable setups, choosing conservative feed rates and utilising the chip control features supports reliable machining of rostfreier Stahl. Easy integration into existing tooling systems The insert is intended as part of a complete turning system: the insert, a compatible external holder or boring bar, a support shim/clamping set and replacement screws. Compatibility depends on form, relief angle (0°), tolerance class, fastening method, size and thickness. Understanding these interface parameters ensures the insert seats correctly, transmits cutting forces safely and achieves the expected tool life and surface quality in serial production. For workshop-grade turning with Tungaloy reliability and to check holder compatibility or stock availability, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored tooling advice and ordering. Article details Article number: 6877358 Manufacturer SKU: TUN6877358 SKU: 6877358-Tungaloy Label: DNMG150408 T6215 Tungaloy indexable insert Model series: ISO turning indexable inserts Material: Carbide (CVD-coated) Dimensions & geometry Insert designation: DNMG150408 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 55° Relief angle: 0° Features & applications Grade: T6215 (CVD-coated carbide) Chipbreaker: double-sided Hole: with cylindrical hole Application: Turning; suited for rostfreier Stahl Suitable for: external and internal turning Compatibility: form, relief angle, tolerance class, fastening, size, thickness FAQ What materials is this insert best suited for? The Tungaloy DNMG150408 T6215 insert is formulated for machining rostfreier Stahl, offering wear resistance and thermal stability for such alloys. How many cutting edges are available per insert? With a double-sided chipbreaker and the rhombic DNMG form, the insert provides multiple indexable edges to extend usable life and lower per-part tooling costs. What does the 0° relief angle mean for setup? A 0° relief angle indicates a neutral clearance geometry; correct holder selection and stable clamping are important to avoid rubbing and ensure efficient cutting. Is the grade suitable for interrupted cuts? The T6215 grade performs well under stable to slightly interrupted conditions; for heavy interruptions, reviewing cutting parameters and clamping rigidity is recommended. Which holders are compatible with this insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness. Use holders specified for ISO DNMG150408 geometry for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated cemented carbide, a 0.8 mm corner radius and ISO compatibility for reliable, repeatable turning performance; order the DNMG150408 T6215 insert directly via Metav Werkzeuge or consult our technical team for application advice. DNMG 150408 T6215 turning insert by Tungaloy — CVD-coated carbide, 55° geometry The DNMG150408 T6215 is an ISO‑standard indexable insert engineered for turning applications, optimised for stainless steels under stable to lightly interrupted cutting conditions. CVD-coated cemented carbide substrate Rhombic 55° geometry for versatile turning Double-sided chipbreaker for repeatable chip control 0.8 mm corner radius for robust edge strength Longer service life through wear-resistant coating The insert uses a CVD-coated cemented carbide grade that improves surface hardness and reduces diffusion wear, which translates into longer tool life and fewer index changes. For machining stainless steels, the chemical and thermal stability of the coating helps to limit built-up edge and maintain consistent cutting forces, thereby supporting process stability and predictable component quality. The DNMG150408 T6215 grade is intended for applications where wear resistance and steady performance are priorities. Consistent surface finish from optimised geometry A rhombic form with a 55° lead angle and a 0.8 mm corner radius delivers predictable chip formation and reliable cutting forces, which benefits surface finish and dimensional consistency. The double-sided chipbreaker is designed for effective chip control in both external and internal turning, helping to avoid rework and reduce cycle-time variations. Compatibility with standard ISO holders ensures straightforward integration into existing tool systems, provided holder form, clearance angle, tolerance class, clamping method, size and thickness are matched. Simple integration into production processes At a thickness of 4.76 mm and with a cylindrical hole for secure clamping, this indexable insert is part of a system comprising the ISO insert, a suitable external holder or boring bar, and the required clamping accessories. This configuration supports fast insert changes and reduces setup time on the shop floor. The combination of robust edge geometry and CVD coating makes the insert particularly suitable for stable to lightly interrupted turning tasks, offering predictable performance across batch production runs. For additional guidance on holder compatibility and process parameters, technical consultation is available. For reliable turning performance with Tungaloy CVD grades, contact Metav Werkzeuge for tailored application advice and efficient supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903032 SKU: 6903032-Tungaloy Manufacturer SKU: TUN6903032 Designation: DNMG150408 T6215 Facts Corner radius: 0.8 mm Lead angle: 55° Relief angle: 0° Thickness: 4.76 mm Size: 15 Hole: with cylindrical hole Special features CVD-coated cemented carbide Rhombic insert form Double-sided chipbreaker Intended for turning of stainless steels under stable to lightly interrupted conditions ISO-compatible indexable insert System components: insert, external holder/boring bar, clamping set and spare screws FAQ What materials is this insert best suited for? The DNMG150408 T6215 is optimised for stainless steels and performs well under stable to lightly interrupted turning conditions, thanks to its CVD-coated cemented carbide construction. How does the chipbreaker affect machining? The double-sided chipbreaker provides controlled chip formation for both external and internal turning, improving process reliability and surface finish when using the DNMG150408 insert. Which geometry features should be considered when choosing a holder? Select a holder matching the 55° lead angle, 0° relief, insert thickness and rhombic form; compatibility depends on holder form, tolerance class, clamping method, size and thickness. How many usable edges are available on this insert? The insert is double-sided with indexed cutting edges; inspection of the specific DNMG150408 T6215 design will determine the exact number of indexable edges per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T6215 Wendeplatten - Tungaloy
Combine wear-resistant CVD-coated T6215 with the precise DNMG150408 rhombic geometry and 0.8 mm corner radius to achieve consistent, repeatable turning of stainless steels; order directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations and availability. DNMG150408 T6215 Turning Insert — Tungaloy DNMG150408 T6215 Tungaloy Turning Insert is a rhombic ISO turning insert designed for machining stainless steels under stable to slightly interrupted conditions CVD-coated carbide grade T6215 For turning of stainless steels Rhombic DNMG 150408, 0.8 mm radius Double-sided chipbreaker, cylindrical hole 0° negative rake, 4.76 mm thickness Consistent performance for stainless-steel turning The CVD-coated carbide in grade T6215 offers high wear resistance specifically tuned for the demands of machining stainless steel. In practical terms this means longer tool life and fewer indexings during series production, resulting in improved productivity and lower tooling costs per component. The coating and substrate combination is optimised for stable to slightly interrupted cuts, reducing flank wear and maintaining a predictable cutting edge for repeatable surface finish. Geometry and ISO compatibility that simplifies set-up The rhombic DNMG150408 form with a 0.8 mm corner radius and 55° insert angle provides a balance between edge strength and accessibility for external and internal turning. Compatibility with ISO holders depends on form, clearance angle, tolerance class, fixing method, size and thickness — the insert’s 4.76 mm thickness and cylindrical hole ensure secure clamping in standard fixtures and easy replacement within conventional tool holders. This reduces set-up time and supports stable process parameters on conventional and CNC lathes. Practical benefits from chip control and edge design A double-sided chipbreaker tailored to the insert geometry helps to control chip form when machining stainless steels, lowering the risk of built-up edge and improving surface finish. The 0° negative rake increases edge robustness for interrupted cuts and heavy feeds, while the double cutting edges per side provide economical usage and straightforward indexing. Together these features enable higher metal removal rates where process stability allows, and a more reliable production rhythm in mixed-batch environments. System integration and application guidance This insert is part of a complete ISO turning system that includes the insert, a matching external holder or boring bar, underlay plates/clamps and replacement screws. Selection of the correct chipbreaker and grade should match workpiece material, machining strategy and machine stability; the T6215 grade is recommended for stainless steels under steady conditions. For mixed-material workshops, choosing the appropriate cutterhead and toolholder geometry will preserve cutting-edge life and maintain dimensional accuracy across batches. Contact Metav Werkzeuge for tailored application advice or to confirm stock and delivery options; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6944702 Manufacturer SKU: TUN6944702 SKU: 6944702-Tungaloy Model series: ISO turning inserts Designation: DNMG150408 Grade: T6215 Material: carbide Coating: CVD-coated Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 15 mm Insert angle: 55° Rake angle: 0° (negative) Double-sided edges: yes Hole style: cylindrical Special features Rhombic insert geometry Double-sided chipbreaker Cylindrical centre hole for secure clamping ISO-form insert for external and internal turning Suited to stable to slightly interrupted cuts Optimised for machining stainless steels Compatible with standard holders, underlay and clamp sets FAQ What materials is this insert suited for? The DNMG150408 T6215 turning insert is optimised for stainless steel machining; the CVD-coated carbide grade T6215 provides wear resistance for stable to slightly interrupted turning operations. How does the 0.8 mm corner radius affect machining? A 0.8 mm radius increases edge strength for interrupted cuts and improves surface integrity; it represents a compromise between tool robustness and the ability to produce defined radii on external and internal contours. Is this insert compatible with standard ISO holders? Yes, the DNMG150408 form is an ISO-standard insert; compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness — matching the insert’s 4.76 mm thickness and cylindrical hole to the holder is essential. How many cutting edges are available per insert? This is a double-sided DNMG insert with multiple usable edges; the double-sided chipbreaker design enables economical edge indexing and consistent chip control. Which chipbreaker should be chosen for heavy feeds? Select a chipbreaker and cutting parameters that match the workpiece stability and feed rate; the double-sided chipbreaker on this insert is suitable for a range of feeds, but heavier or unstable cuts may require a more robust holder setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9205 Wendeplatten - Tungaloy
Take advantage of a wear-resistant, CVD-coated carbide grade engineered for productive steel turning and the predictable interchangeability of an ISO 150408 rhombic geometry; order directly via Metav Werkzeuge or consult our advisors for holder compatibility and process parameters. DNMG 150408 T9205 indexable turning insert — Tungaloy, CVD-coated carbide, 55° DNMG150408 T9205 is an ISO-standard indexable insert designed for productive external and internal turning of steel under stable machining conditions CVD-coated carbide for high cutting speeds ISO 150408 rhombic geometry, 55° cutting angle Double-sided insert with cylindrical hole Optimised chip control for steel turning Increased productivity through a wear-resistant grade The T9205 grade is a CVD-coated carbide designed to extend tool life at elevated cutting speeds while maintaining dimensional stability. This delivers a measurable improvement in process efficiency: the combination of a hard coating and a tough substrate reduces flank wear and supports longer uninterrupted tool life, which can lower overall machining costs per component. The insert’s construction is particularly suited for stable setups where consistent cutting parameters and coolant conditions are employed to exploit the grade’s advantages. Predictable clamping and interchangeability for shorter setup times Built to the ISO 150408 specification, the rhombic format with a 55° cutting angle ensures compatibility with a wide range of ISO holders and tooling systems. The double-sided design and the central cylindrical hole allow reliable clamping and quick index changes, reducing downtime. Using standardised inserts simplifies inventory and makes tool changes predictable, so repeatability and process control are improved across batch runs and different operators. Consistent chip control and improved surface quality The double-sided chipbreaker geometry provides optimised chip control, which helps to avoid chip entanglement and supports stable cutting forces during turning of steels. Better chip formation contributes to a more uniform material removal and an improved surface finish, reducing the need for secondary operations. For operators less familiar with chipbreaker function: it modifies the way chips curl and fracture, directing them away from the workpiece and tool flank to maintain consistent cutting conditions. Practical dimensions for common turning applications The insert’s dimensions — 4.76 mm thickness and a 0.8 mm corner radius — balance edge strength with the ability to achieve fine profiles and tolerances. The zero-degree clearance angle facilitates predictable engagement in standard turning conditions, while the 15 mm size and rhombic shape suit a broad spectrum of external and internal turning tasks. Integration into an ISO-compatible system requires the appropriate external holder, supporting plate and fixing screws; verifying holder form, clearance and tolerance class ensures the best performance from the insert. For high-productivity steel turning with Tungaloy inserts, contact Metav Werkzeuge to specify the DNMG 150408 T9205 and arrange tailored advice — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical Data Article number: 6785683 Manufacturer SKU: TUN6785683 Shop SKU: 6785683-Tungaloy Material: carbide Grade/coating: T9205, CVD-coated Application: turning ISO designation: 150408 Facts Corner radius: 0.8 mm Cutting angle: 55° Thickness: 4.76 mm Size: 15 mm Clearance angle: 0° Special features Rhombic insert shape Double-sided chipbreaker Cylindrical centre hole for clamping Compatible with ISO holders and clamping systems Suitable for productive steel machining under stable conditions FAQ What materials is this insert intended for? The DNMG150408 T9205 indexable insert from Tungaloy is optimised for machining steel and performs best in stable turning applications where its CVD-coated carbide grade can be fully exploited. How does the T9205 grade improve tool life? Tungaloy’s T9205 combines a wear-resistant CVD coating with a robust carbide substrate to reduce flank wear at higher cutting speeds, which extends the effective life of the insert and supports productive turning cycles. Is the insert compatible with standard ISO holders? Yes — the insert follows the ISO 150408 specification; compatibility depends on holder form, free angle, tolerance class and clamping arrangement, so correct matching to ISO holders is recommended. What benefits does the double-sided chipbreaker provide? The double-sided chipbreaker improves chip control and helps achieve a more consistent surface finish by directing and fracturing chips reliably during steel turning. Which dimensions are relevant for selecting the right holder? Key dimensions include the 4.76 mm thickness, 15 mm size and 0.8 mm corner radius; the cylindrical hole and rhombic geometry must match the holder’s seating and clamp design. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance and a compact rhombic 55° geometry to increase productivity and repeatability in stable turning operations; order via Metav Werkzeuge or consult their specialists for application advice. DNMG150408 T9205 — DNMG 150408 T9205 Turning Insert (Tungaloy) DNMG150408 T9205 is an ISO-standard, rhombic indexable insert designed for productive external and internal turning in stable setups, optimised for steel machining. ISO 150408 rhombic geometry 55° CVD-coated carbide for high cutting speeds 0.8 mm corner radius for consistent finishes Cylindrical centre hole, double-sided usability Boosted throughput through optimised grade and geometry The DNMG150408 insert combines a CVD-coated carbide substrate with the T9205 wear-resistant grade to enable productive turning of steel under stable conditions. The rhombic 55° geometry and 0.8 mm corner radius provide a balance between strength and finish quality, reducing downtime for rework and enabling higher material removal rates where tool holding is rigid. The coating reduces flank and crater wear, which translates into longer effective cutting life and more predictable tool-change intervals, improving process efficiency. Easy integration into ISO tool systems for reliable setup Indexable insert compatibility is defined by form, relief angle, tolerance class, fastening, size and thickness; the rhombic form with a 0° relief angle matches common ISO toolholders for turning. The insert’s cylindrical centre hole and standard dimensions (ISO 150408) simplify clamping and replacement in both external holders and boring bars. Clear specification of thickness and geometry shortens setup time and reduces the risk of mounting errors, supporting reproducible part quality and straightforward tool inventory management. Consistent surface quality and predictable tool life With a double-sided chipbreaker and the T9205 composition, the insert promotes stable chip formation and improved surface finishes on steel workpieces at elevated cutting speeds. The moderate corner radius helps avoid edge chipping on interrupted cuts while still achieving the required surface integrity. These characteristics support an economically attractive cycle time and steady output, making the insert a solid choice for production runs where consistency and repeatable results are priorities. Contact Metav Werkzeuge for tailored application advice or to request DNMG150408 T9205 inserts; Metav Werkzeuge can advise on holder compatibility and supply options — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: 6785768 SKU: 6785768-Tungaloy Manufacturer SKU: TUN6785768 Designation: DNMG150408 T9205 Tungaloy insert Material: Carbide (cemented carbide) Grade: T9205 Application: Turning Core technical data Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 55° Relief angle: 0° Centre hole: with hole, cylindrical Special features CVD-coated carbide grade T9205 Double-sided chipbreaker Rhombic insert shape ISO 150408 designation Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The DNMG150408 T9205 insert from Tungaloy is optimised for machining steel under stable cutting conditions; the T9205 CVD-coated carbide grade improves wear resistance and performance at higher cutting speeds. Can the insert be indexed and used on both sides? Yes — the DNMG150408 T9205 is double-sided and can be rotated to present a fresh cutting edge, extending effective tool life for production work when used in appropriate holders. How is the insert mounted in a toolholder? Mounting relies on ISO-compatible form and dimensions: the rhombic geometry, 0° relief angle, 4.76 mm thickness and cylindrical centre hole match standard clamping systems; confirm holder compatibility by matching these key parameters and tolerance class. What benefits does the T9205 grade deliver? T9205 is a wear-resistant, CVD-coated carbide grade developed for productive turning of steel; it offers improved flank and crater wear resistance, contributing to longer, more predictable tool life for Tungaloy turning inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide wear resistance, ISO compatibility and a 0.8 mm corner radius for a consistently productive turning process; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. DNMG150408 T9205 turning insert by Tungaloy — CVD-coated carbide, 55° rhombic DNMG150408 T9205 is an ISO rhombic turning insert designed for productive external and internal turning of steel under stable machining conditions. CVD-coated carbide for high wear resistance ISO rhombic shape with 55° cutting angle 0.8 mm corner radius for robust edge strength Double-sided chipbreaker, compatible with standard holders Boosted productivity through advanced coating and grade The CVD-coated cemented carbide grade T9205 provides a clear performance advantage in repetitive turning operations on steel. The chemical vapour deposition layer reduces flank and crater wear, which results in longer edge life and fewer indexings; this delivers lower tooling cost per component and steadier cycle times. For process planners, the hard coating also supports higher cutting speeds in stable setups while maintaining surface quality, making the insert a rational choice where throughput and lifetime matter. Clear ISO compatibility and secure mounting for reliable setup Manufactured to the ISO dimensions of a rhombic plate with a 55° cutting angle, the insert fits holders that match in form, clearance, tolerance class, fastening style, size and thickness. The design includes a cylindrical hole for positive location and a double-sided chipbreaker, enabling two usable edges per side. These geometric properties simplify tool selection and reduce setup variation: confirm holder compatibility by matching form, thickness (4.76 mm) and hole style to ensure consistent clamping and repeatable results. Geometry engineered for process security and consistent surface finish With a 0.8 mm corner radius and a plate thickness of 4.76 mm, this rhombic insert combines edge strength with accessible cutting conditions for medium to heavy engagement. The double-sided chipbreaker supports controlled chip formation and evacuation, which contributes to stable forces and reproducible part quality. The overall combination of geometry and T9205 grade ensures reliable performance in stable turning environments, giving manufacturers predictable tool life and improved component finish. Contact Metav Werkzeuge for application advice on Tungaloy inserts and to secure the DNMG150408 T9205 for efficient steel turning; Metav Werkzeuge can recommend the optimal holder and process parameters for each machining task. Technical data Article number: 6785736 Manufacturer SKU: TUN6785736 Model series: ISO-Drehwendeschneidplatten Type designation: DNMG150408 Brand: Tungaloy Material: Hartmetall Grade: T9205 Application: Drehen Specifications Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Hole style: cylindrical hole Special features ISO rhombic plate form Double-sided chipbreaker CVD-coated cemented carbide With hole for secure positioning Compatible with standard ISO holders FAQ What machining tasks is this insert intended for? The DNMG150408 T9205 insert is designed primarily for external and internal turning of steel, offering productive performance under stable cutting conditions. How does the T9205 grade affect tool life and speed? The T9205 grade, a CVD-coated cemented carbide, increases wear resistance and allows for higher cutting speeds in stable set-ups, extending tool life compared with uncoated grades. Is the insert compatible with standard ISO holders? Yes; the plate follows ISO rhombic dimensions and fits holders that match its form, thickness (4.76 mm), hole style and tolerance class. How many cutting edges are available per insert? Thanks to the double-sided chipbreaker and the plate geometry, multiple usable edges are available, which improves cost efficiency per edge. Which features improve chip control during turning? The double-sided chipbreaker combined with the CVD-coated grade supports stable chip formation and evacuation, helping to maintain consistent surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9205 Wendeplatten - Tungaloy
Take advantage of a productive, wear-resistant turning solution that combines CVD-coated carbide performance with a compact rhombic 55° geometry and a fine 0.8 mm nose radius for reliable profile control; order through Metav Werkzeuge or request application advice from the consultants. DNMG150408 T9205 indexable insert for turning by Tungaloy — rhombic 55° with 0.8 mm nose radius DNMG150408 T9205 Tungaloy insert is an ISO‑standard turning insert designed for productive external and internal turning where stable conditions and higher cutting speeds are required CVD-coated carbide grade T9205 Rhombic 55° geometry for versatile turning 0.8 mm nose radius for fine profile control Double-sided chipbreaker, cylindrical hole Increased productivity through wear-resistant grade and coating The insert uses a CVD-coated carbide substrate in T9205 grade, developed for productive turning of steel under stable machining conditions and at elevated cutting speeds. The coating provides a protective barrier against abrasive wear and built-up edge, which translates into longer tool life and fewer indexings per component run. For users aiming to raise throughput, the T9205 grade offers a predictable wear curve that supports consistent cycle times and reduced tool-change frequency. Precise geometry for flexible turning and reliable clamping A rhombic 55° geometry with a 0.8 mm nose radius provides a balance between robustness and the ability to generate fine surface profiles. The insert is ISO-standard and features a cylindrical hole for secure fastening; compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness. The nominal clearance angle is 0°, making the geometry particularly suitable for general turning operations where support from the toolholder and correct seat are essential for stable cutting. Dependable chip control and straightforward system setup The double-sided chipbreaker offers controlled chip formation for common steel grades, reducing the risk of tangled chips and improving surface quality. As part of a system comprising a matching external holder or boring bar, a clamping set and replacement screws, the insert integrates into established setups without additional adaptation. For specific applications or adaptations, Metav Werkzeuge provides technical guidance; machining parameters and chipbreaker choice should be matched to the material, operation and machine stability to achieve the best results. For tailored recommendations on using the Tungaloy T9205 inserts and for prompt supply, contact Metav Werkzeuge for application support and order placement via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6785708 Manufacturer article number: 6785708 SKU: 6785708-Tungaloy Manufacturer SKU: TUN6785708 Facts Insert designation: DNMG150408 Size: 15 mm Thickness: 4.76 mm Nose radius: 0.8 mm Approach angle: 55° Clearance angle: 0° Special features CVD-coated carbide, grade T9205 Rhombic insert form, double-sided chipbreaker Cylindrical hole for fastening ISO-series indexable turning insert Application: turning of steel under stable conditions System components: holder, clamping set and replacement screws FAQ What materials is this insert best suited for? The DNMG150408 T9205 insert is optimised for machining steel; the T9205 grade and CVD coating favour abrasive resistance and stable performance when turning steel at higher cutting speeds. How does the 55° geometry affect cutting applications? A rhombic 55° geometry delivers a versatile cutting angle for both external and internal turning, allowing controlled cutting forces and suitable approach for medium‑duty turning tasks. Is the insert reversible and what chip control does it offer? Yes — the insert is double‑sided with a double-sided chipbreaker, enabling reversal of the indexable insert to use the second cutting edge and providing improved chip control for typical steel grades. Which holders and clamping systems are compatible? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the DNMG150408 insert requires a holder matched to those parameters and can be secured using the appropriate clamping set and replacement screws. Does the insert include a hole feature and what type is it? The DNMG150408 insert is supplied with a cylindrical hole, designed to accommodate standard fastening methods for secure mounting in ISO‑type holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9205 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade T9205 and the ISO-standard DNMG150408 geometry to boost throughput on stable steel turning operations; order via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG 150408 T9205 DNMG Turning Insert — CVD-coated carbide, 55° geometry, Tungaloy DNMG150408 T9205 is an ISO-standard rhombic turning insert designed for productive external and internal turning of steel under stable cutting conditions CVD-coated carbide grade T9205 Rhombic 55° geometry for versatile turning Double-sided chipbreaker for reliable chip control Cylindrical hole for secure clamping 0.8 mm corner radius for fine profile control Increased productivity for steel turning The CVD-coated carbide grade T9205 is tailored for productive turning of steel at elevated cutting speeds. Its coating improves wear resistance and heat tolerance, which translates into longer tool life and reduced tool-change frequency. For workshops aiming to lower cost per part, the combination of a wear-resistant coating and a robust substrate supports sustained cutting performance and predictable process windows. This leads to fewer unscheduled stoppages and a steadier output in batch and series production. Secure clamping and consistent chip control A rhombic 55° geometry combined with a cylindrical hole and a double-sided chipbreaker ensures stable retention in the holder and effective chip formation. The double-sided chipbreaker design maintains consistent chip shape on both edges, which simplifies reindexing and reduces set-up variability. Predictable chip evacuation reduces the risk of entanglement and improves surface quality, especially during longer cuts where thermal and mechanical loads vary. Straightforward selection and holder compatibility As an ISO-standard insert, the plate matches common holder families when form, clearance angle, tolerance class, fastening and thickness align. The specified dimensions — inscribed circle 15 mm, thickness 4.76 mm and a clearance angle of 0° — make it compatible with many established tool posts and boring bars. This reduces the need for bespoke tooling and shortens changeover times, allowing quick implementation in existing tool systems without complex adaptations. Precision edge and application versatility With a 0.8 mm corner radius, the insert balances edge strength and fine profile capability, enabling both roughing and light finishing passes under stable set-ups. The CVD coating supports higher surface integrity and consistent dimensional results when machining steels, while the substrate provides toughness against chipping under interrupted cuts. For users requiring a reliable indexable solution, the combination of geometry and grade offers a clear compromise between durability and surface quality. For machining operations that demand a robust, CVD-coated turning solution from Tungaloy, contact Metav Werkzeuge for tailored advice and availability — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical data Article number: 6785667 Manufacturer SKU: TUN6785667 Brand: Tungaloy Model series: ISO turning inserts SKU: 6785667-Tungaloy Core data Insert designation: DNMG150408 ISO code: 150408 Inscribed circle: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Lead angle: 55° Special features Material: Carbide (Hartmetall) Coating / grade: T9205 (CVD-coated) Hole style: Cylindrical hole Chipbreaker: Double-sided Application: Turning Compatible with ISO holders FAQ What applications suit this insert best? The DNMG150408 T9205 insert is intended primarily for productive external and internal turning of steel under stable conditions, where higher cutting speeds and good wear resistance are required. Can the insert be reindexed, and how many cutting edges are available? The rhombic DNMG form offers multiple usable edges; the double-sided design allows reindexing to extend service life while maintaining chip control. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and thickness; the ISO designation DNMG150408 aligns with common ISO external and internal turning holders. How does the T9205 grade perform compared with general-purpose grades? T9205 is a CVD-coated, wear-resistant grade optimised for productive steel machining, delivering enhanced wear life and stability at higher cutting speeds compared with uncoated general-purpose grades. Is the insert suitable for interrupted cuts? The carbide substrate provides toughness to tolerate some interruption, but the grade and geometry are optimised for stable cutting conditions; stability of the set-up should be assessed for heavy interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215 for high wear resistance and 0.8 mm corner radius for reliable edge strength; the rhombic 55° geometry supports efficient medium-steel turning. Order the DNMG150408 T9215 indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150408 T9215 — DNMG indexable turning insert, CVD-coated carbide, 0.8 mm radius — Tungaloy The DNMG150408 T9215 is an ISO rhombic indexable insert developed for productive external and internal turning of medium steels, combining durable CVD-coated carbide with a double-sided chipbreaker for continuous to light interrupted cuts. CVD-coated carbide grade T9215 For medium steel machining 0.8 mm corner radius 55° rhombic geometry Cylindrical hole for secure clamping Productivity and predictable tool life for medium-steel turning The CVD-coated carbide grade T9215 is engineered to balance wear resistance with fracture toughness, enabling longer tool life in sustained operations. The insert’s combination of coating and substrate reduces flank wear and maintains cutting-edge integrity under steady machining conditions, which translates into fewer indexings and consistent cycle times. This makes the insert a pragmatic choice where steady throughput and low downtime are priorities. Reliable cutting geometry and chip control for process stability The rhombic 55° shape with a double-sided chipbreaker provides stable cutting forces and controlled chip formation, improving surface finish and reducing the risk of edge chipping during light interruptions. The 0.8 mm corner radius offers an optimal compromise between edge strength and dimensional control, supporting predictable component tolerances while keeping cutting loads manageable on the holder and machine spindle. Compatibility and mounting: clear parameters for correct clamping As an ISO-standard turning insert, compatibility with the toolholder is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The insert is supplied with a cylindrical hole, enabling secure fastening on compatible DNMG holders; correct matching of holder seat and clamping hardware ensures repeatable positioning and safe operation, especially under interrupted cuts. Application range and recommended cutting conditions Designed primarily for turning medium steel, the insert performs best in continuous to light interrupted feed conditions where T9215 shows superior wear resistance and robust edge behaviour. The plate’s 4.76 mm thickness and rhombic form are suited to typical external and internal turning tasks; selecting coolant strategy and cutting parameters according to workpiece alloy and stability will maximise productivity and surface quality. For high-productivity medium-steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for application advice and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772246 SKU: 6772246-Tungaloy Manufacturer SKU: TUN6772246 Model series: ISO-Drehwendeschneidplatten Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Insert angle: 55° Hole: with hole Hole style: cylindrical hole Special features Material: CVD-coated carbide (T9215) Plate form: rhombic Chipbreaker: double-sided Application: turning; medium steel machining; continuous to light interrupted cuts Compatibility: ISO insert — compatibility depends on holder form, clearance, tolerance, clamping, size and thickness FAQ What materials is this insert best suited for? The DNMG150408 T9215 insert is optimised for medium steel machining; the T9215 grade combines wear resistance and toughness for productive turning operations. Can the insert be used for interrupted cuts? Yes, the insert is suitable for continuous to light interrupted cuts; the double-sided chipbreaker and robust carbide substrate reduce the risk of chipping during slight interruptions. How is the insert secured in the holder? This ISO rhombic insert is delivered with a cylindrical hole for clamping; correct holder selection and matching tolerance class ensure secure and repeatable mounting. What are the key geometry features that affect part finish? The 55° rhombic geometry and 0.8 mm corner radius influence cutting forces and surface quality; together they support dimensional control while offering edge strength for typical turning tasks. Which article and manufacturer SKU should be referenced when ordering? Reference article number 6772246 or manufacturer SKU TUN6772246 when ordering the DNMG150408 T9215 Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide grade T9215 and the rhombic DNMG form with a 0.8 mm nose radius for consistently productive medium‑steel turning; order or request application advice through Metav Werkzeuge for optimal holder compatibility and cutting data. DNMG150408 T9215 ISO indexable turning insert for turning — Tungaloy The DNMG150408 T9215 is an ISO‑standard indexable turning insert designed for external and internal turning, offering a balance of wear resistance and fracture toughness for medium‑range steel machining. CVD-coated carbide for high wear resistance Optimised for medium steel machining Double-sided chipbreaker for consistent chips Rhombic DNMG form with 0.8 mm nose radius Productivity through a wear-resistant CVD coating The combination of a CVD-coated carbide substrate and the T9215 grade provides a clear productivity advantage in continuous and light interrupted turning. The coating increases abrasive wear resistance while the carbide core maintains fracture toughness, which reduces unplanned insert changes and keeps cycle times low. For production environments seeking steady tool life and repeatable component quality, this grade supports higher cutting speeds and longer machining intervals, translating into measurable process gains. Predictable chip control and consistent surface finish A double-sided chipbreaker integrated into a rhombic geometry delivers reliable chip formation and evacuation, which simplifies coolant and chip‑conveyor setup. The controlled chip flow lowers the risk of secondary machining marks and helps achieve consistent surface quality on medium steels. The insert’s 0.8 mm nose radius aids in producing stable finishes while maintaining dimensional control, particularly on external profiles and light shoulder cuts. Compatibility with ISO toolholders and easy indexability The insert conforms to ISO DNMG dimensions and is designed for use with standard DNMG holders; compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness. The 0° clearance angle and rhombic DNMG form permit reliable seating and simple indexing, enabling quick rotation to fresh cutting edges and minimising downtime. Selection of a matching holder and correct clamp hardware ensures repeatable positioning and optimal cutting geometry. Application guidance and material suitability The grade is intended as a first choice for medium steel machining, combining stable wear behaviour with resistance to chipping under normal to slightly interrupted cuts. It is suitable for both external and internal turning operations when paired with an appropriate holder and cutting parameters. For machining strategies that demand higher productivity with predictable tool life, the insert’s design supports consistent cycle throughput and fewer tool interventions. For advice on selecting the correct holder or cutting data for the Tungaloy T9215 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — the team will recommend the optimal setup for the intended turning application Technical Data Manufacturer article number: 6944576 SKU: 6944576-Tungaloy Manufacturer SKU: TUN6944576 Material: cemented carbide Grade/coating: T9215 (CVD-coated) Model series: ISO turning inserts Application: turning Numerical Data ISO designation: 150408 Insert size: 15 mm Thickness: 4.76 mm Nose radius: 0.8 mm Clearance angle: 0° Included angle: 55° Design & Features Insert form: rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Cutting edges: indexable, double-sided Typical system: insert + suitable external holder or boring bar + clamp set and replacement screws Typical use: external and internal turning; select chipbreaker and grade according to workpiece material and stability FAQ What materials is this insert best suited for? The DNMG150408 T9215 insert is optimised for medium steels, offering a balance of wear resistance and fracture toughness for continuous to light interrupted cuts. Can the insert be used on both external and internal turning operations? Yes, the ISO‑standard rhombic form and indexability make the insert suitable for external and internal turning when paired with the correct DNMG‑style holder. How does the T9215 grade affect cutting performance? The T9215 CVD coating enhances abrasive wear resistance while the carbide substrate improves toughness, supporting higher productivity and consistent tool life on steels. Is the chip control suitable for automated production? The double-sided chipbreaker provides predictable chip formation, which supports automated chip handling and helps maintain surface quality in production runs. What dimensions are critical when checking holder compatibility? Holder compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness — confirm these specifications with the chosen DNMG holder before mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215, ISO rhombic geometry (55°) and a 0.8 mm corner radius to boost productivity in medium-steel turning while maintaining tool life; order the insert through Metav Werkzeuge or consult their advisors for application support. DNMG150408 T9215 — DNMG 150408 T9215 turning insert, CVD-coated carbide, 55° by Tungaloy DNMG150408 T9215 is an ISO-standard rhombic turning insert designed for productive medium-steel machining with a cylindrical hole for secure clamping CVD-coated carbide for medium steel ISO rhombic DNMG 55° geometry Double-sided chipbreaker with cylindrical hole 0.8 mm corner radius for versatile turning High productivity for medium-steel turning The insert is engineered around the T9215 grade, a CVD-coated carbide that balances wear resistance and fracture toughness for sustained performance in medium-steel applications. The substrate and coating combination enables higher cutting parameters compared with uncoated grades, so cycle times are reduced without sacrificing edge life. The ISO rhombic form with a 55° approach angle translates tool geometry into reliable cutting mechanics, offering stable cutting forces and consistent component finish even during longer runs. Reliable clamping and consistent chip control The rhombic plate form and the cylindrical hole ensure reproducible seating and secure fixation in compatible holders, which is essential for vibration damping and repeatable tolerances. The double-sided chipbreaker is suited to chip control in continuous to slightly interrupted cuts, improving surface quality and reducing manual chip handling. With a 0.8 mm corner radius the insert supports a mix of finishing and light shoulder work, enabling flexibility across component features while keeping tool change frequency low. Practical grade guidance and process integration This insert is recommended for turning of medium steels where a balance of durability and edge stability is required; the T9215 grade performs well under steady production and modestly interrupted cuts. Compatibility with a clamping system depends on holder form, clearance angle, tolerance class, fixation and plate thickness; match the 4.76 mm plate thickness and the 15 mm size to the intended holder. If process parameters are being updated, select cutting speeds and feeds to exploit the coating’s wear resistance while avoiding excessive shock loads that could reduce life. For tailored recommendations or availability of the Tungaloy T9215 DNMG150408 insert, contact Metav Werkzeuge for application advice and stock information: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6772245 Manufacturer SKU: TUN6772245 Metav SKU: 6772245-Tungaloy Model series: ISO turning indexable inserts Material: carbide Dimensions & core data Corner radius: 0.8 mm Insert size: 15 mm Plate thickness: 4.76 mm Approach angle: 55° Clearance angle: 0° Features & suitability ISO designation: DNMG150408 Grade/coating: T9215, CVD-coated carbide Shape: rhombic Hole: cylindrical (with hole) Chipbreaker: double-sided Application: turning; optimised for medium steel Recommended cut type: continuous to slightly interrupted Compatibility: determined by form, clearance angle, tolerance class, fixation, size and thickness FAQ What materials is the DNMG150408 T9215 insert best suited for? The DNMG150408 T9215 insert is optimised for medium steel machining, offering a balance of wear resistance and toughness for productive turning operations. How does the T9215 coating affect performance? The CVD-coated T9215 grade increases wear resistance and supports higher cutting parameters compared with uncoated carbide, extending tool life in continuous production. Is the insert reversible or single-side use? This rhombic insert is double-sided with a chipbreaker on both cutting edges, allowing indexable reuse until both edges are worn. Which holder characteristics must be matched for correct use? Correct compatibility requires matching the holder by form, clearance angle, tolerance class, fixation method, insert size (15 mm) and plate thickness (4.76 mm). Can the insert handle interrupted cuts? The DNMG150408 with T9215 is suitable for continuous to slightly interrupted cuts; heavy interruptions or shock loads should be avoided to maintain edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and a double-sided chipbreaker to increase tool life and productivity in medium Stahl turning operations; order the insert directly via Metav Werkzeuge or consult the team for selection and delivery. DNMG150408 T9215 indexable turning insert — CVD-coated carbide, 55° lead angle, Tungaloy The DNMG150408 T9215 is an ISO rhombic indexable insert designed for turning applications, offering a CVD-coated carbide grade optimised for medium Stahl machining with a double-sided chipbreaker. CVD-coated carbide for high wear resistance Double-sided geometry for economical use ISO-compatible rhombic insert, 55° lead angle Cylindrical-hole design for secure clamping Boosted productivity with a wear-resistant coating The combination of a CVD-coated carbide substrate and the T9215 grade delivers a balance of high wear resistance and fracture toughness that supports higher cutting parameters in continuous to slightly interrupted cuts. This insert is engineered for consistent edge life, which reduces changeover frequency and helps stabilise cycle times. For production environments where reproducible results matter, the coated surface protects the cutting edge against abrasive and adhesive wear while maintaining dimensional integrity over longer tool life. Economical geometry and reliable clamping for repeatable results The double-sided chipbreaker and rhombic geometry with a 55° lead angle permit two usable cutting edges per indexation, improving cost-efficiency per edge. The cylindrical hole enables secure clamping in standard ISO holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so the insert mates with a wide range of DIN/ISO turning toolholders. The 0.8 mm corner radius supports stable cutting in medium Stahl workpieces, offering a compromise between edge strength and surface finish. Practical setup advice and machining benefits With a 4.76 mm plate thickness and ISO designation DNMG150408, the insert is suitable for external and internal turning tasks where medium Stahl removal is required. Choosing the T9215 grade allows higher productivity due to its wear-resistant coating while still providing reliable fracture control, making it a first choice for many batch and continuous operations. When selecting a holder and insert seat, ensure matching tolerance and fastening specifications to exploit the insert’s full potential for process stability. For tailored recommendations on tooling combinations and fast supply of Tungaloy DNMG150408 T9215 inserts, contact Metav Werkzeuge — Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich; eMail: info@metav-werkzeuge.com; Tel: +49 2822 7131930 Technical Data Article number: 6796032 SKU: 6796032-Tungaloy Manufacturer SKU: TUN6796032 Model series: ISO-Drehwendeschneidplatten ISO designation: DNMG150408 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 15 mm Lead angle: 55° Clearance angle: 0° Special features Grade/coating: T9215 Cutting material: CVD-coated carbide Chipbreaker: double-sided Plate shape: rhombic Hole: with cylindrical hole Typical application: Drehen (turning) Suitability: medium Stahl machining Compatibility requirements: form, clearance angle, tolerance class, fastening, size, thickness FAQ What materials is this insert intended for? The DNMG150408 T9215 insert is specified for medium Stahl machining; the T9215 grade combines wear resistance and fracture toughness for stable performance. Is the insert compatible with standard ISO holders? Compatibility depends on matching form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG150408 conforms to ISO dimensions for rhombic inserts. How does the double-sided chipbreaker benefit production? The double-sided chipbreaker provides two indexable edges, improving cost-efficiency per edge and enabling consistent chip control for continuous to slightly interrupted cuts with the T9215 coating. What is the corner radius and how does it affect finish? The corner radius is 0.8 mm, offering a compromise between edge strength and surface finish suitable for many turning operations in medium Stahl. Can this insert be used for internal turning as well as external turning? Yes, the insert’s rhombic geometry and 55° lead angle make it versatile for both external and internal turning tasks when mounted in an appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Combining CVD-coated carbide durability, a 55° rhombic geometry and a 0.8 mm corner radius, this insert ensures stable, high-productivity turning of medium steels; order directly via Metav Werkzeuge or consult our specialists for tailored cutting data. DNMG 150408 T9215 ISO turning insert for turning — Tungaloy The DNMG150408 T9215 is an ISO rhombic turning insert designed for external and internal turning, offering a wear-resistant grade for medium steel machining. CVD-coated carbide for high wear resistance Optimised for medium steel with T9215 grade Rhombic 55° geometry, 0° clearance angle Double-sided insert with cylindrical hole Greater productivity through a wear-resistant grade The T9215 grade is a CVD-coated carbide specifically developed as a first choice for medium steel machining. By combining elevated wear resistance with fracture toughness, the grade supports continuous to slightly interrupted cuts and allows longer tool life and fewer indexings. The result is improved productivity and predictable performance in batch production, where component consistency and uptime are critical. Stable geometry for accurate, repeatable results The rhombic 55° geometry and 0° clearance deliver a balance between cutting edge strength and accessibility in shoulder and profile turning. A 0.8 mm corner radius reduces edge stress while supporting dimensional accuracy on workpieces. Holder compatibility is determined by form, free angle, tolerance class, fastening, size and thickness, so correct seat and clamp selection ensure consistent clamping and repeatable tolerances for serial production. System efficiency with easy indexing and secure clamping As a double-sided ISO insert with a cylindrical hole, this design enables fast indexing and stable clamping on matched external holders or boring bars. The 4.76 mm plate thickness and 15 mm size provide robustness for general turning applications, while the rhombic profile offers access in internal bores and external shoulders. The system build—insert, suitable holder, shim/clamping set and spare screw—supports quick tool changes and lower effective tooling cost per part. Practical guidance for reliable machining Select the appropriate chipbreaker and T9215 grade according to the workpiece material and cutting mode; the double-sided chipbreaker here is suited for typical medium-steel feeds and speeds. For slightly interrupted cuts choose a more conservative depth of cut and verify clamping torque to maintain edge stability. For application-specific cutting data or to adapt parameters for different steels and spindle speeds, Metav Werkzeuge can provide technical recommendations to reduce trial time and secure process reliability. Contact Metav Werkzeuge for tailored cutting data and to arrange supply of the Tungaloy DNMG150408 T9215 insert; Metav Werkzeuge can advise on holder compatibility and optimised cutting parameters. Technical data Article number: 6772268 Manufacturer SKU: TUN6772268 SKU: 6772268-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: DNMG150408 T9215 Tungaloy-Wendeplatte Facts Insert size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Geometry angle: 55° Clearance (free) angle: 0° Hole: with hole (cylindrical hole) Special features Material: carbide (CVD-coated) Grade: T9215, optimised for medium steel Plate form: rhombic Double-sided insert with chipbreaker both sides Intended application: external and internal turning Compatibility determined by form, free angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The DNMG150408 T9215 insert is optimised for medium steel applications; the T9215 CVD-coated carbide grade balances wear resistance and edge strength for consistent performance. How is the insert secured in the holder? Clamping is achieved via the cylindrical hole and the appropriate shim/clamping set; correct seating per the ISO form and proper fastening ensure stable fixation for the turning operation. Is the insert indexable and economical for serial production? Yes, the double-sided design enables indexing to a fresh cutting edge, reducing tooling cost per part and improving uptime in serial production scenarios. What does the 55° geometry mean for cutting? A 55° rhombic geometry provides an effective compromise between cutting-edge strength and access to shoulders and profiles, offering predictable cutting forces and good surface finish on typical turning tasks. What is the manufacturer SKU and article number for ordering? The manufacturer SKU is TUN6772268 and the article number is 6772268; reference these when specifying the Tungaloy DNMG150408 T9215 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, robust fracture toughness and ISO compatibility for dependable medium-steel turning performance; order the DNMG150408 T9215 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150408 T9215 Tungaloy turning insert — CVD-coated carbide, 55° rhombic geometry The DNMG150408 T9215 is a 55° rhombic indexable turning insert designed for external and internal turning in medium-steel applications, offering a balance of durability and productivity. CVD-coated carbide grade T9215 55° rhombic geometry for versatile turning 0.8 mm nose radius for precise profiles Double-sided chipbreaker design ISO-standard DNMG150408 with cylindrical hole Maximised productivity with a CVD-coated carbide grade The CVD-coated cemented carbide grade T9215 combines wear resistance with reliable fracture toughness, making it a first choice for medium-steel machining where continuous or lightly interrupted cuts are common. This coating system increases tool life under sustained cutting conditions and reduces the frequency of index changes, which in turn improves machine uptime and lowers unit cost per part. The specification emphasises consistent performance under industrial production loads, so process planners can expect steady results when the grade is matched to workpiece material and cutting strategy. Geometry and dimensions that support precise turning The rhombic 55° geometry and a 0.8 mm nose radius yield a versatile contact profile that suits a wide range of finishing and semi-finishing tasks. With a plate thickness of 4.76 mm and a standard 15 mm size, the insert fits common ISO DNMG toolholders; compatibility is governed by form, relief angle, tolerance class, clamping method, size and thickness. The 0° relief angle contributes to predictable cutting forces on stable setups. These geometric parameters allow engineers to calculate approach angles, feed per revolution and depth of cut with clarity, ensuring that process sheets and CAM data remain robust and reproducible. Stable clamping and chip control for repeatable results The insert’s cylindrical hole and rhombic form support stable clamping in matched holders, reducing vibration and improving surface finish. The double-sided chipbreaker design facilitates efficient chip formation and evacuation, which is especially helpful during longer cycles and when machining bars or forgings with variable interruption. Where machine stability is limited, selecting the appropriate chipbreaker and adjusting feed rates can markedly reduce edge stress and avoid premature wear, so maintenance intervals are extended and scrap rates decline. Application guidance that reduces setup time and risk As an ISO-standardised indexable insert for turning, the DNMG150408 T9215 is suitable for a broad set of workshop tasks including external profiling and internal shoulders, provided the toolholder geometry and clamping meet the manufacturer’s tolerances. Matching the chipbreaker and grade to the workpiece and cutting conditions is central to performance: the T9215 grade is optimised for medium steels and offers a reliable compromise between life and edge robustness. For tool-room planning, it is advisable to verify holder compatibility by comparing form, free angle and thickness with the insert designation and to favour rigid setups to exploit the grade’s strengths. Contact Metav Werkzeuge for application advice or to request the Tungaloy DNMG150408 T9215 insert; technical guidance and orders via Metav Werkzeuge are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6772252 Manufacturer SKU: TUN6772252 Model series: ISO indexable turning inserts Designation: DNMG150408 Facts Insert size: 15 mm Thickness: 4.76 mm Nose radius: 0.8 mm Relief angle: 0° Approach angle: 55° Special features CVD-coated cemented carbide (grade T9215) Rhombic shape, double-sided chipbreaker Cylindrical hole for secure clamping ISO-standard indexable insert for external and internal turning FAQ Which materials is this insert best suited for? The DNMG150408 T9215 insert and its T9215 grade are optimised for medium steels, offering a balance of wear resistance and fracture toughness suitable for productive turning operations. Can the insert be used for both external and internal turning? Yes, the insert is specified for external and internal turning; its rhombic 55° geometry and cylindrical-hole clamping support a variety of turning tasks when matched with the correct holder. How is compatibility with a toolholder determined? Compatibility depends on form, free angle (relief), tolerance class, clamping method, size and thickness—compare these parameters to the DNMG150408 designation before installation. What benefits does the T9215 grade provide? The T9215 grade delivers improved wear resistance and robust edge security, which helps maintain productivity during continuous and lightly interrupted cuts. How does the double-sided chipbreaker affect workshop efficiency? The double-sided chipbreaker supports predictable chip formation and multiple indexings, reducing downtime for edge changes and aiding process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com