DNMG 150408 T9215 Wendeplatten - Tungaloy
Take advantage of a proven combination of CVD‑coated carbide wear resistance and fracture‑tough geometry for consistent medium‑steel productivity; order directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG150408 T9215 indexable turning insert — 55° rhombic, CVD‑coated carbide by Tungaloy DNMG150408 T9215 is an ISO‑standard rhombic indexable insert designed for external and internal turning in medium‑grade steels, combining abrasion resistance with reliable toughness. ISO rhombic insert DNMG150408 T9215 CVD‑coated carbide for high wear resistance 55° lead angle, 0° clearance angle 0.8 mm corner radius, double‑sided chipbreaker Compatible with ISO turning holders (with hole) High productivity for medium‑steel turning through robust grade and coating The CVD‑coated carbide composition of this grade T9215 is specified for mid‑range steel machining, where a balance of wear resistance and fracture toughness is essential. Its microstructure and coating are selected to withstand continuous to lightly interrupted cuts, so material removal rates can be increased without a proportional loss in tool life. By combining a dependable coating system with a mechanically sound carbide substrate, the insert supports stable process performance and predictable tool‑change intervals. Geometry that stabilises cut and improves surface quality The rhombic form with a 55° lead angle and 0° clearance angle provides a compact cutting geometry that reduces radial cutting forces while enabling access in profiling and general turning operations. The 0.8 mm corner radius contributes to improved edge strength and consistent surface finish when finishing or semi‑finishing. As a double‑sided component with a central cylindrical hole, the plate can be indexed to use both cutting edges, extending service life and lowering per‑part tooling costs. The 4.76 mm plate thickness and 15 mm nominal size ensure compatibility with standard ISO holders designed for this format. System compatibility and practical selection advice for reliable machining Compatibility with a given holder is determined by form, free angle, tolerance class, fastening method, size and thickness; the ISO conformity of this insert simplifies selection for existing tool systems. The indexable insert is supplied as part of a system that includes a suitable external holder or boring bar, underlay/shim and clamping screws — correct assembly and clamp torque are decisive for repeatable results. Choose the double‑sided chipbreaker and grade pairing that matches the workpiece material and stability of the set‑up to unlock the best combination of productivity and component quality. For reliable medium‑steel turning choose Tungaloy quality — order the DNMG150408 T9215 from Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations Technical data Article number: 6772228 Manufacturer SKU: TUN6772228 Model series: ISO turning inserts Material: carbide Grade: T9215 Key figures Designation: DNMG150408 Size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Lead angle: 55° Clearance angle: 0° Special features CVD‑coated carbide substrate Rhombic plate form Double‑sided chipbreaker With cylindrical hole for fastening Intended for medium‑grade steel machining FAQ What materials is this insert suited for? The DNMG150408 T9215 insert is optimised for medium‑grade steel machining; the T9215 grade was designed to combine wear resistance with fracture toughness for productive steel turning. Can the insert be indexed to use multiple cutting edges? Yes, the insert is double‑sided and can be indexed to present fresh cutting edges; the rhombic form and central cylindrical hole enable secure clamping and edge rotation. Which holder types are compatible with this plate? Compatibility is determined by ISO form, size, thickness and fastening; the DNMG150408 format fits standard ISO turning holders specified for DNMG‑style inserts. How does the 0.8 mm corner radius affect finish and strength? A 0.8 mm corner radius increases edge strength for interrupted cuts and supports a consistent surface finish during finishing and semi‑finishing passes. Is the T9215 grade suitable for light interruptions and higher cutting speeds? The T9215 grade, with its CVD coating and carbide substrate, is intended for continuous to lightly interrupted cuts and supports higher productivity in medium‑steel applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Robust CVD‑coated T9215 grade and an ISO rhombic form ensure high wear resistance and reliable fracture toughness for continuous to lightly interrupted turning; the 0.8 mm nose radius and 55° geometry support consistent surface quality and process stability. Order original inserts directly via Metav Werkzeuge or consult our specialists for matching holders and clamp sets. DNMG150408 T9215 indexable turning insert (ISO rhombic, 55°) — Tungaloy The DNMG150408 T9215 is an ISO‑standard rhombic turning insert designed for medium‑grade steel machining, combining CVD‑coated carbide performance with a geometry optimised for productive, repeatable turning operations ISO‑standard rhombic insert, 55° geometry CVD‑coated carbide T9215 for mid‑steel 0.8 mm nose radius for consistent finish Double‑sided, cylindrical hole for secure clamping Increased productivity through a wear‑resistant grade The CVD‑coated T9215 grade delivers a balance of wear resistance and fracture toughness that favours sustained cutting speeds and higher material removal rates in medium‑hard steels. With fewer premature edge failures, the insert supports predictable tool life and reduced downtime, which translates into lower process costs per component. The coating technology reduces adhesion and abrasive wear; in practical terms this means longer intervals between indexings and a more stable production rhythm. Geometry that improves surface quality and stability A 55° lead angle in a rhombic form concentrates cutting forces favourably while the 0.8 mm nose radius helps produce a consistent surface finish with manageable cutting loads. The specified 0° clearance angle and the insert thickness ensure that seating and clamping stresses are controlled when the correct holder is selected. For operators, this geometry offers a compromise between form accuracy and edge strength, helpful when transitioning from finishing to light roughing without changing tool types. System compatibility and cost efficiency in handling Being an ISO insert, the component fits into standard turning tool systems when holder form, clearance angle, tolerance class, fixing method, size and thickness match. The double‑sided design and cylindrical hole permit secure clamping and two usable edges per index, improving cost efficiency per cutting edge. Select the appropriate chipbreaker and grade for the workpiece material and cutting condition; remember that the overall system includes the insert, a matching outside holder or boring bar, a support/ clamp kit and replacement screws to maintain process reliability. Secure original Tungaloy DNMG150408 T9215 inserts through Metav Werkzeuge for consistent productivity; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6796072 SKU: 6796072-Tungaloy Manufacturer SKU: TUN6796072 Series: ISO turning insert series Application: Turning Material: Carbide Core dimensions ISO designation: 150408 Size: 15 mm Thickness: 4.76 mm Nose radius: 0.8 mm Lead angle: 55° Clearance angle: 0° Features & compatibility Grade: T9215 (CVD‑coated carbide) Chipbreaker: double‑sided Hole: with cylindrical hole Shape: rhombic Insert is ISO‑standard; compatibility depends on holder form, clearance, tolerance, fixing, size and thickness FAQ What materials is this insert suited for? The T9215 grade is engineered primarily for medium‑grade steel machining; the DNMG150408 insert from Tungaloy offers the wear resistance and fracture toughness suitable for continuous to lightly interrupted cuts in such materials. How does the insert geometry affect surface finish? The rhombic 55° geometry combined with a 0.8 mm nose radius provides a good balance between cutting stability and surface quality, enabling consistent finishes without excessive cutting forces. Is this insert reversible or single‑use per edge? The insert is double‑sided and features a cylindrical hole for secure clamping, allowing indexing to a fresh edge and thus extending usable life per insert. What determines compatibility with a toolholder? Compatibility is determined by matching the insert form, clearance angle, tolerance class, fixing method, size and thickness to the holder; the DNMG150408 follows ISO dimensions, simplifying selection when holders are ISO‑compliant. Can this insert handle interrupted cuts? The T9215 grade is suitable for continuous to lightly interrupted cutting; for heavy interruptions, a different grade or geometry may be preferable to maximise edge life. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9215 and the robust 55° rhombic geometry for stable, high-productivity turning operations; order directly via Metav Werkzeuge or consult our specialists for machining recommendations. DNMG150408 T9215 turning indexable insert by Tungaloy The DNMG150408 T9215 is an ISO-standard rhombic indexable insert designed for external and internal turning, optimised for medium steel machining. CVD-coated carbide grade T9215 Rhombic 55° insert geometry 0.8 mm corner radius for versatility Double-sided insert with cylindrical hole Negative 0° relief, thickness 4.76 mm High productivity through a wear-resistant grade The CVD-coated carbide T9215 combines high wear resistance with notable fracture resistance, making the insert particularly effective for medium steel applications. This composition supports sustained cutting performance during continuous to slightly interrupted operations and helps maintain consistent component quality. By selecting a grade engineered for stability rather than purely for maximum cutting speed, process reliability and tool life are improved, which in turn reduces downtime and tool changes. Secure clamping and ISO compatibility reduce setup time The indexable plate follows ISO-standard dimensions, so compatibility with holders is governed by the insert form, clearance angle, tolerance class, fixing method, size and thickness. The rhombic 55° geometry and the cylindrical hole enable a stable clamping interface when used with the correct holder, minimising chatter and improving repeatability. The 4.76 mm plate thickness and double-sided design permit economical index changes while maintaining secure fixation for reliable turning cycles. Consistent part finish with optimised edge geometry A 0.8 mm corner radius delivers a balance between edge strength and surface quality, giving a robust cutting edge that resists chipping while producing a fine finish on turned surfaces. The double-sided configuration and the insert’s geometry contribute to even wear progression, which supports repeatable surface roughness over longer runs. For applications demanding dimensional consistency, the combination of controlled edge radius and a stable grade helps preserve tolerance and reduces rework. Practical selection and system recommendations When integrating this insert into a tooling system, choose the chipbreaker and insert grade to match the workpiece material, cutting conditions and stiffness of the machine-holding arrangement. A standard system comprises the indexable insert, a matched external holder or boring bar, an underlay shim or clamp set, and the correct replacement screws. For outside and inside turning operations, selecting a double-sided insert with the specified relief and hole style ensures straightforward installation and efficient stock removal, especially when productivity and process security are priorities. The DNMG150408 T9215 designation provides a clear reference when checking compatibility with existing holders. For tailored advice on integrating Tungaloy turning inserts into specific production processes, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application support and ordering assistance. Technical data Article number: 6772272 Manufacturer SKU: TUN6772272 SKU: 6772272-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: DNMG150408 T9215 Tungaloy-Wendeplatte Data Insert shape angle: 55° (rhombic) Corner radius: 0.8 mm Relief angle: 0° (negative) Plate thickness: 4.76 mm Plate size: 15 Special features Material: CVD-coated carbide Double-sided with cylindrical hole Rhombic insert form Suitable for external and internal turning Best suited for medium steel machining; stable cutting and fracture resistance FAQ What materials is this insert intended for? The T9215 grade is tailored for medium steel machining; the DNMG150408 insert performs well on typical steel alloys under continuous to slightly interrupted cuts. How does the double-sided design affect tool life? A double-sided insert extends usable life by allowing the workpiece to be machined using a second cutting edge after indexing, which improves economy and reduces tool changes for turning applications. Which parameters determine holder compatibility? Compatibility depends on insert form, clearance angle, tolerance class, fixing method, size and thickness—verify these dimensions against the intended holder before use. Can this insert be used for interrupted cuts? Yes; the T9215 grade combines wear resistance with fracture toughness, making it suitable for continuous and light to moderate interrupted cuts. What should be checked when replacing an insert? Ensure the holder accepts a rhombic 55° insert with 4.76 mm thickness, confirm the cylindrical hole and fixing method match the clamp system, and select the appropriate chipbreaker for the workpiece. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
High wear resistance and good fracture toughness combine in this ISO-standard rhombic insert to deliver productive, repeatable turning results on medium-grade steels. With a CVD-coated cemented carbide T9215 grade and a 0.8 mm nose radius, the design supports consistent chip control and stable cutting at continuous to lightly interrupted cuts. Order the insert directly via Metav Werkzeuge or consult the advisers for application-specific recommendations. DNMG 150408 T9215 turning insert by Tungaloy — CVD-coated carbide, 55° The DNMG150408 T9215 is an ISO rhombic turning insert engineered for medium-steel machining, offering a balanced combination of wear resistance, breakage safety and reliable chip formation for productive external and internal turning applications ISO-standard rhombic insert DNMG shape CVD-coated cemented carbide grade T9215 Double-sided chipbreaker for consistent chips 55° approach angle, 0.8 mm nose radius Engineered for productive turning with measurable benefits The insert is designed as an ISO-standard turning plate, making it straightforward to select matching holders and bores for stable setups. The 55° approach angle and the rhombic geometry provide an effective compromise between reach and rigidity, which helps to maintain dimensional accuracy during external and internal turning. By choosing the right chipbreaker and grade, the tool delivers a measurable increase in cutting performance and process reliability for series production. Coating and substrate that extend tool life The T9215 grade denotes a CVD-coated cemented carbide substrate that unites enhanced wear resistance with sufficient toughness to withstand light interruptions. A CVD coating forms a hard, uniform layer that reduces adhesion and abrasion at the cutting edge; this leads to longer tool life and fewer indexings compared with uncoated grades in similar conditions. For shops aiming to improve throughput, the coating supports extended cutting times and consistent surface finishes. Practical compatibility and selection guidance Compatibility with chipper holders depends on the insert’s form, relief angle (0°), tolerance class, clamping method, size and thickness. The plate’s cylindrical hole and double-sided design mean two cutting edges are available per index, improving cost efficiency per edge. Select the chipbreaker and cutting parameters to match the workpiece material and the machining strategy — the T9215 grade is the recommended first choice for medium-hard steels where a balance of wear resistance and breakage safety is required. Workshop handling and process advantages The 0.8 mm nose radius and 4.76 mm plate thickness provide a robust edge for dimensional stability while allowing fine control of surface finish. The double-sided chipbreaker helps maintain consistent chip formation, which reduces the need for frequent process adjustments and improves machine uptime. Together, these features support a smooth production flow and predictable tool performance in continuous to lightly interrupted turning cycles. For application advice or to secure Tungaloy inserts for medium-steel turning, contact Metav Werkzeuge for tailored recommendations and order placement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6772223 SKU: 6772223-Tungaloy Manufacturer SKU: TUN6772223 Model series: ISO-standard turning inserts Facts Size: 15 mm Thickness: 4.76 mm Nose radius: 0.8 mm Relief angle: 0° Approach angle: 55° Special features CVD-coated cemented carbide (T9215) Rhombic plate form Cylindrical hole Double-sided chipbreaker ISO-standard geometry for turning Suitable for medium-steel machining FAQ What materials is this insert best suited for? The DNMG150408 T9215 insert with T9215 CVD-coated cemented carbide is intended as a first choice for medium-grade steels and performs well in continuous to lightly interrupted turning operations. How does the double-sided chipbreaker influence productivity? A double-sided chipbreaker provides two usable edges per index and promotes uniform chip formation, which improves edge life consistency and reduces downtime for insert changes. Which holders are compatible with this ISO insert? Compatibility is determined by the insert form, relief angle, tolerance class, clamping method, size and thickness; the rhombic ISO geometry of DNMG150408 allows use with standard DNMG holders that match those parameters. What are the key dimensional features to consider when specifying the insert? Important values are the 15 mm size, 4.76 mm thickness, 0.8 mm nose radius and the 55° approach angle; these define compatibility and expected cutting behaviour. How does the T9215 grade affect tool life and surface finish? The T9215 CVD coating enhances wear resistance while retaining fracture toughness, supporting longer cutting intervals and consistent surface quality in medium-steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 for high wear resistance and the 55° rhombic geometry for accurate external and internal turning; this insert supports productive machining with stable chip control. Order the insert directly via Metav Werkzeuge or ask their consultants for application advice. DNMG150408 T9215 — DNMG 150408 turning indexable insert (Tungaloy) DNMG150408 T9215 is an ISO-standard, CVD-coated carbide indexable insert designed for productive external and internal turning in medium-strength steels. ISO 150408 rhombic indexable insert CVD-coated carbide grade T9215 55° cutting angle for accurate turning Double-sided chipbreaker, with cylindrical hole High productivity through material and coating The DNMG150408 grade combines a CVD-coated carbide substrate with the T9215 specification to deliver extended tool life under continuous and light interrupted cutting. The CVD coating increases surface hardness and improves wear resistance, which reduces downtime for tool changes and helps maintain component tolerances over longer runs. For workshops aiming to boost throughput, this translates into fewer interruptions and more consistent cycle times while retaining predictable wear behaviour. Geometry engineered for consistent part quality The rhombic plate form with a 55° cutting angle and a 0.8 mm corner radius provides a reliable balance between chip control and edge strength. The insert’s double-sided design doubles indexable life, and the cylindrical centre hole ensures secure clamping in compatible ISO holders. Because compatibility depends on form, relief angle, tolerance class, fastening, size and thickness, the geometry supports repeatable positioning and thus consistent surface finish and dimensional accuracy on turned components. Suited for medium steel machining with robust chip control Selected for medium steel machining, this Tungaloy grade is optimised to perform under typical turning conditions where a mix of wear resistance and fracture toughness is required. The integrated chipbreaker supports controlled chip formation, improving process stability and reducing the risk of built-up edge in continuous cuts. These characteristics make the insert appropriate for both external and internal turning operations where productivity and tool life are priorities. Easy integration into ISO turning systems and expert support As an ISO-standard insert, the part integrates into established toolholding systems when the holder matches the insert’s dimensions and specifications. The plate size is 15 mm with a thickness of 4.76 mm and a relief angle of 0°; these measurable values simplify planning for inventory and tool setup. If uncertain whether this insert matches a specific holder or application, Metav Werkzeuge provides technical advice and supplementary data by email or phone to support the selection process—please refer to their contact details for tailored recommendations. For high-productivity turning applications, choose Tungaloy’s DNMG150408 T9215 and request application advice and stock information from Metav Werkzeuge via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6772235 Manufacturer SKU: TUN6772235 SKU: 6772235-Tungaloy Designation: DNMG150408 Grade/coating: T9215 (CVD-coated carbide) Material: carbide Model series: ISO turning indexable inserts Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 0° Hole style: cylindrical, with centre hole Double-sided insert Special features Rhombic plate form (ISO 150408) CVD-coated carbide for wear resistance Double-sided, reversible for extended life Chipbreaker designed for stable chip control Application: turning (external and internal) Compatibility determined by form, tolerance, fastening, size and thickness FAQ What materials is this insert designed for? The DNMG150408 T9215 insert is optimised for medium steel machining; the CVD-coated carbide composition provides a balance of wear resistance and toughness for productive turning. Can the insert be used for both external and internal turning? Yes, the ISO rhombic geometry and centre hole mounting allow the insert to be used in both external and internal turning operations when paired with a compatible holder. How does the chipbreaker affect machining stability? The double-sided chipbreaker on this insert promotes consistent chip formation and improved chip evacuation, which enhances process stability during continuous and light interrupted cuts. What must be considered for holder compatibility? Compatibility relies on matching the insert’s form, relief angle, tolerance class, fastening method, size and thickness to the holder; verify these parameters against the toolholder specifications before use. Is the insert reversible and how does that impact cost-efficiency? The insert is double-sided and reversible, effectively doubling the available cutting edges per insert and improving overall cost-efficiency in production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance and fracture toughness plus ISO compatibility for consistent productivity in turning operations. Order the insert directly via Metav Werkzeuge or consult the technical advisors for help with holder selection. DNMG150408 T9215 indexable turning insert — CVD-coated carbide, rhombic 55° by Tungaloy The DNMG150408 T9215 is an ISO-standard rhombic insert designed for external and internal turning, offering a balance of wear resistance and toughness for medium-stiff steel machining. ISO rhombic insert, 55° geometry CVD-coated carbide grade T9215 0.8 mm corner radius for versatile finishes Double-sided insert with cylindrical hole High productivity through a wear-resistant grade The CVD-coated carbide grade T9215 combines improved sliding properties with structural durability, which makes it a reliable choice for medium steel applications. This coating supports extended tool life by increasing wear resistance while the substrate maintains fracture toughness, so machining can proceed at higher material removal rates with fewer indexings. The result is a measurable uplift in productivity for continuous to slightly interrupted turns, with more consistent tool performance over longer production runs. Geometry and clamping for repeatable accuracy The rhombic ISO form with a 55° main cutting angle and a clearance angle of 0° is optimised for general turning tasks; the 0.8 mm corner radius delivers a compromise between robustness and surface finish. With a plate thickness of 4.76 mm and a nominal size of 15 mm, the insert interfaces via a cylindrical hole that supports secure, repeatable clamping. Compatibility with the chosen holder depends on form, free angle, tolerance class, fastening method, size and thickness, and correct pairing reduces vibration and improves both dimensional control and tool life. Practical benefits for workshop operations The insert delivers improved chip control and predictable cutting behaviour when used with an appropriate chipbreaker and holder system, reducing manual rework and inspection time. The geometry and coating combination contribute to a consistent surface finish and fewer interruptions for tool change. For shops prioritising steady production and process reliability, the DNMG150408 T9215 insert offers a cost-effective path to repeatable results while maintaining operational uptime through durable performance. For reliable, production-ready turning inserts from Tungaloy and expert guidance on holder compatibility, contact Metav Werkzeuge to discuss availability and tailored recommendations. Technical data Article number: 6772240 Manufacturer SKU: TUN6772240 SKU: 6772240-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150408 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 15 mm Main cutting angle: 55° Clearance angle: 0° Special features CVD-coated carbide grade T9215 Rhombic plate form Double-sided insert with cylindrical hole Suitable for external and internal turning Double-sided chipbreaker design FAQ What materials is this insert suited for? The CVD-coated grade T9215 is primarily intended for medium steel machining and provides a good balance of wear resistance and toughness for productive turning operations. How does the plate geometry affect performance? The rhombic 55° geometry combined with a 0.8 mm corner radius offers robustness for general turning while enabling acceptable surface finish and stable cutting forces for a range of turning tasks. Is the insert compatible with standard ISO holders? Compatibility is determined by holder form, free angle, tolerance class, fastening and the insert’s size and thickness; matching these parameters ensures correct seating and repeatable clamping of the insert. Can this insert handle interrupted cuts? The grade and substrate toughness make it suitable for continuous to slightly interrupted cuts; severely interrupted or highly unstable conditions may require a more fracture-resistant geometry or different grade. What is the manufacturer article identifier? The Tungaloy product is listed under article number 6772240 and manufacturer SKU TUN6772240 for order and inventory reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, fracture toughness and precise ISO compatibility to keep turning processes productive and predictable. Order the DNMG150408 T9215 Tungaloy insert directly via Metav Werkzeuge or ask the consultants for application support. DNMG 150408 T9215 — DNMG Turning Insert by Tungaloy, CVD-coated carbide, 55° rhombic DNMG150408 T9215 is a precision indexable insert for turning, engineered for medium steel machining with a double-sided chipbreaker and CVD-coated carbide grade CVD-coated carbide grade T9215 Optimised for medium steel machining 55° rhombic geometry, 0° clearance Double-sided chipbreaker, cylindrical hole Higher productivity through material and coating synergy The insert combines a CVD coating with a tough carbide substrate to deliver sustained performance in continuous to slightly interrupted cuts. The chosen grade offers wear resistance alongside good fracture toughness, which reduces unplanned indexings and extends tool life in medium steel applications. This results in fewer tool changes and a more stable machining cycle, supporting higher overall component throughput. Predictable chip control and process security A double-sided chipbreaker designed for turning operations provides repeatable chip formation and evacuation, lowering the risk of surface damage and reducing cycle variability. The 55° rhombic geometry plus a 0° clearance angle gives consistent tool engagement and straightforward setting in compatible holders, improving repeatability across batches. These features translate into a more secure process and less rework on turned parts. Easy integration into ISO tool systems for workshop efficiency The insert follows ISO indexing conventions, simplifying replacement and holder compatibility checks. The rhombic form with a cylindrical hole accommodates common clamping systems and the specified tolerances for fitment ensure predictable seating. This standardised approach helps maintain machine uptime, simplifies tool management and allows straightforward stocking of spare inserts for ongoing production. Machining detail: geometry and application benefits With a corner radius of 0.8 mm the geometry balances edge strength and surface finish capability for medium steels; the radius supports stable cutting without excessive cutting forces while enabling acceptable surface integrity. The plate thickness of 4.76 mm contributes to stiffness when clamped, and the double-sided design doubles index life per insert, lowering the cost per cutting edge under consistent production conditions. For application advice or to confirm stock and delivery times for the Tungaloy DNMG150408 T9215 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — technical consultation is available to match insert choice with workpiece material and process stability. Technical data Article number: 6772215 Manufacturer SKU: TUN6772215 Model series: ISO indexable turning inserts Model name: DNMG150408 T9215 Tungaloy insert Application: Turning Dimensions & numerical data Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Angle: 55° Clearance angle: 0° Special features CVD-coated carbide (T9215) Double-sided chipbreaker Cylindrical hole Rhombic plate form ISO-compliant insert designation FAQ What materials is this insert suitable for? The Tungaloy DNMG150408 T9215 insert is optimised for medium steel machining; its CVD-coated carbide composition provides wear resistance and toughness suited to continuous and slightly interrupted turning cuts. How does the grade T9215 influence tool life? Grade T9215 combines a wear-resistant coating with a robust carbide substrate, improving edge life and reducing the frequency of indexings when used under recommended speeds and feeds. Can the insert be used in standard ISO holders? Yes, the insert follows ISO indexing standards and the rhombic form with a cylindrical hole ensures compatibility with common clamping systems designed for ISO-format turning inserts. What surface finish can be expected with a 0.8 mm radius? A 0.8 mm corner radius offers a balance between edge strength and surface finish; it allows decent surface quality on medium steel while maintaining edge robustness for production runs. Is the insert provided double-sided and does that affect cost efficiency? The insert is double-sided, which effectively doubles the number of usable cutting edges per insert and improves cost efficiency per machined part in steady production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, robust edge security and ISO compatibility to sustain production in medium-steel turning; order the inserts via Metav Werkzeuge or contact our technical advisers for fitment and process optimisation. DNMG 150408 T9215 Turning Insert — Tungaloy, CVD-coated carbide, 55° DNMG150408 T9215 is an ISO-standard, rhombic turning insert for versatile external and internal turning in medium steels, designed for continuous to slightly interrupted cuts. ISO rhombic insert DNMG 150408, 55° CVD-coated carbide grade T9215 for medium steel Double-sided chipbreaker, 0° clearance angle 0.8 mm nose radius; 4.76 mm plate thickness Built for productive medium‑steel turning The T9215 grade is a CVD‑coated carbide formulated to combine wear resistance with reliable fracture resistance, making it well suited for sustained cycles on medium-strength steel. This composition helps to maintain a consistent edge life under continuous and slightly interrupted cuts, which improves overall process efficiency. The CVD coating reduces flank wear and heat-related abrasion, so downtime for tool changes is reduced and component tolerances remain stable over longer production runs. Geometry that stabilises cutting and improves surface finish A 55° rhombic geometry with a 0° clearance angle delivers a neutral cutting stance that balances cutting force direction and tool engagement. The double-sided chipbreaker design offers two usable cutting edges per index, extending the effective life per insert and lowering tooling cost per part. The 0.8 mm nose radius supports improved surface finish and dimensional control on turned features while preserving robustness at the cutting edge for semi-finishing passes. Together, these features support steady chip formation and predictable results on shaft and bore operations. ISO compatibility and practical handling to speed set-up Being part of the ISO-standard range, the insert fits holders according to defined parameters: form, clearance, tolerance class, fastening and thickness. The plate’s 4.76 mm thickness and through-hole (cylindrical hole) ensure secure clamping with standard DNMG-compatible holders; verify matching tolerances and screw types before assembly. The insert’s configuration simplifies inventory management — compatible with a wide range of external holders and boring bars — and the reversible indexing reduces changeover frequency. For traceability and ordering reference, note the manufacturer SKU: TUN6775265. For procurement or application advice on Tungaloy T9215 inserts and to confirm holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert technical guidance Technical Data Article number: 6775265 Manufacturer: Tungaloy Model series: ISO turning inserts SKU: 6775265-Tungaloy Facts ISO code: 150408 Insert designation: DNMG150408 Geometry angle: 55° Nose radius: 0.8 mm Plate thickness: 4.76 mm Special features Material: carbide Coating: CVD Plate form: rhombic Chipbreaker: double-sided Hole: cylindrical through-hole FAQ What materials is this insert suitable for? The DNMG150408 T9215 Tungaloy turning insert is optimised for medium steel machining and performs well in continuous to slightly interrupted cuts thanks to its CVD‑coated carbide grade. Which holder characteristics must be checked for fitment? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG150408 designation aligns with ISO dimensions for standard DNMG holders. Can this insert be used for internal turning and external turning? Yes — the rhombic 55° geometry and the double-sided chipbreaker make the insert suitable for both external and internal turning operations, offering versatility across common shaft and bore tasks. How does the T9215 grade compare to alternative grades? T9215 provides a balanced combination of wear resistance and fracture toughness, yielding productive performance on medium steel where a stable cutting edge and longer tool life are priorities. Is the insert reversible and how does that affect tooling costs? The double‑sided design allows indexing to a fresh edge, which extends usable life per insert and reduces tooling cost per component relative to single-edge alternatives. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Take advantage of the T9215 CVD-coated carbide grade and the 0.8 mm corner radius to combine wear resistance with fracture safety for productive turning; order directly via Metav Werkzeuge or request cutting data from the consultants for tailored process parameters. DNMG 150408 T9215 Indexable Turning Insert — for Turning, Tungaloy A DNMG150408 T9215 indexable insert engineered for external and internal turning in medium steel applications, offering a robust CVD-coated carbide grade for continuous to lightly interrupted cuts CVD-coated carbide grade T9215 Designed for medium steel machining Double-sided rhombic geometry for two edges Cylindrical hole for secure fastening Increased productivity through wear-resistant grade and geometry The CVD-coated carbide T9215 combines elevated wear resistance with defined fracture toughness, enabling longer tool life in serial production and less frequent index changes. As an indexable insert, this geometry supports efficient material removal in turning operations while maintaining surface quality. The T9215 coating reduces flank wear under steady cutting speeds, which directly translates into fewer tool changes and a more predictable production flow. This is particularly advantageous where sustained throughput and repeatable component quality are required. Reliable compatibility and economical edge usage Constructed to ISO norms, the insert fits standard holders when form, clearance, tolerance class, fastening method, size and thickness match; this ensures straightforward replacement and reduced setup time. The rhombic, double-sided design provides two usable cutting edges per side, delivering cost-efficient utilisation of each insert. A cylindrical hole secures the insert reliably in the clamping system, lowering the risk of unexpected movement and enabling consistent cutting performance across batches. Geometry that balances strength and surface finish The 0.8 mm radius strengthens the cutting edge, improving resistance to chipping in interrupted cuts while still permitting acceptable surface finish on turned components. The insert’s included angle of 55° and a clearance angle of 0° define the contact conditions between tool and workpiece; a neutral clearance can help distribute cutting forces more evenly for stable chip formation. With a plate thickness of 4.76 mm and an inscribed circle of 15 mm, the body offers the rigidity needed for medium-duty turning without excessive tool overhang. Practical guidance for selection and application For reliable results, match the chipbreaker and the T9215 grade to the workpiece material and the machine-tool stability: a stable setup allows higher cutting speeds and leverages the insert’s wear resistance, while less rigid conditions benefit from conservative parameters to avoid edge damage. Typical applications include external and internal turning of medium-strength steels in continuous to lightly interrupted cuts. Process engineers and operators gain measurable advantages in consistency and tool life by selecting the appropriate chip control and cutting data. Contact Metav Werkzeuge for tailored cutting data, availability and technical recommendations for the Tungaloy DNMG 150408 T9215 indexable insert Technical data Article number: 6772231 Manufacturer SKU: TUN6772231 SKU: 6772231-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Inscribed circle: 15 mm Included angle: 55° Clearance angle: 0° Special features CVD-coated carbide grade T9215 Rhombic plate form Double-sided insert Cylindrical hole Designed for turning Suitable for medium steel machining ISO-standardised insert for compatibility with matching holders FAQ What materials is this insert suited for? The DNMG 150408 T9215 insert is intended primarily for medium steel machining; the T9215 grade combines wear resistance and toughness for continuous to lightly interrupted cuts. How is the insert fastened to the holder? The insert uses a cylindrical hole and is secured with the appropriate clamping system; compatibility is determined by form, clearance angle, tolerance class, fastening type, size and thickness. How many cutting edges are available per insert? The rhombic, double-sided design provides multiple usable cutting edges, enabling economical rotation and re-indexing during production. What edge radius and geometry should be expected for finishing work? This insert features a 0.8 mm radius and a 55° included angle; the radius offers a compromise between edge strength and surface finish, suitable for medium-duty finishing when set with appropriate feeds and speeds. Is this part identifiable by a manufacturer SKU? Yes, the item is listed with Manufacturer SKU TUN6772231 and article number 6772231 for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
High wear resistance, reliable edge control and ISO conformity make this insert a dependable choice for medium-steel turning; its rhombic geometry and 0.8 mm corner radius deliver consistent surface quality — order the DNMG150408 T9215 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408 T9215 indexable turning insert — CVD-coated carbide, 55° lead angle — Tungaloy DNMG150408 T9215 is an ISO-standard rhombic indexable insert designed for external and internal turning, offering high productivity in continuous to light interrupted cuts. ISO rhombic geometry with 55° lead angle CVD-coated carbide for medium-steel turning Double-sided insert with cylindrical locating hole 0.8 mm corner radius for predictable chip control Productivity through material and grade The combination of a CVD-coated surface and a carbide substrate gives the insert an excellent balance of wear resistance and fracture toughness. The grade T9215 is specified for medium-steel machining and is engineered to sustain high productivity in continuous to lightly interrupted operations. For production environments this means fewer tool changes and longer periods of stable cutting, translating into improved process efficiency and reduced per-part tooling cost. Geometry that simplifies holder selection and repeatability Built to ISO standards, the rhombic form with a 55° lead angle and 0° rake ensures predictable engagement with compatible holders. The insert measures 15 mm across the cutting edge with a plate thickness of 4.76 mm and a 0.8 mm corner radius, features that determine seat fit, clearance and clamping. The presence of a cylindrical hole and double-sided configuration allows two usable cutting edges per index, improving inventory efficiency and guaranteeing repeatable positioning when mounted in ISO-designated clamping systems. Improved chip control and surface finish A double-sided chipbreaker tailored to medium steels supports controlled chip formation and evacuation, reducing the risk of surface damage and prolonging effective edge life. The combination of geometry and the T9215 grade contributes to a consistent surface finish and stable cutting forces, which benefits downstream operations and inspection. For workshops aiming for reproducible component quality, this insert supports steady cycle times and reduced rework. System thinking for economical machining As an indexable component it is part of a system comprising the insert, matching external holder or boring bar, and the correct clamping set. Changing a worn insert is faster and less costly than remanufacturing a solid tool, and selecting the right chipbreaker and grade for the workpiece yields measurable savings over time. Where process stability is critical, choosing a Tungaloy indexable insert with CVD coating can be a decisive factor in reaching productivity and quality targets. Contact Metav Werkzeuge for tailored advice on holder compatibility or to order DNMG150408 T9215; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6772274 SKU: 6772274-Tungaloy Manufacturer SKU: TUN6772274 Model series: ISO turning indexable inserts Material: carbide Core specifications Shape: rhombic Size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Lead angle: 55° Rake angle: 0° Sides: double-sided Hole style: cylindrical hole Special features Grade: T9215 Coating: CVD-coated carbide Typical application: medium-steel turning Use: external and internal turning Chipbreaker: double-sided Compatibility: determined by form, clearance, tolerance, fastening, size, thickness FAQ What materials is this insert intended for? The DNMG150408 T9215 insert is optimised for medium-steel machining; the T9215 grade combines wear resistance with fracture security for continuous to light interrupted cuts. How many usable edges does the insert offer? With a double-sided design and ISO rhombic form, the insert provides two usable cutting edges per side, allowing multiple indexes before replacement. Which holders are compatible with this insert? Compatibility depends on the ISO form, clearance (frewinkel), tolerance class, fastening method, size and thickness; select a holder that matches the DNMG150408 specifications and clamping arrangement. What is the significance of the 0.8 mm corner radius? A 0.8 mm corner radius balances edge strength and surface finish; it improves edge robustness while contributing to predictable chip formation in medium-steel turning. Does the insert require a specific chipbreaker type? The supplied configuration uses a double-sided chipbreaker suitable for medium steels; choosing a different chipbreaker or grade is recommended when machining other materials or under different cutting conditions. What information is important when ordering spare inserts? Provide the ISO designation DNMG150408, grade T9215, manufacturer Tungaloy and the SKU 6772274-Tungaloy to ensure correct supply and interchangeability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade chosen for high wear resistance and fracture toughness plus an ISO DNMG geometry that ensures broad holder compatibility; this combination supports stable, productive turning of medium steels. Order the inserts via Metav Werkzeuge or consult the technical team for application-specific parameters. DNMG150408 T9215 ISO turning insert (DNMG) — Tungaloy, CVD-coated carbide The DNMG150408 T9215 is an ISO-standard indexable turning insert designed for external and internal turning of medium steels and for continuous to lightly interrupted cuts, featuring a rhombic form with a 55° cutting angle and a 0.8 mm corner radius. CVD-coated carbide grade T9215 Optimised for medium steel turning ISO DNMG 150408 geometry for broad fit 0.8 mm corner radius, 55° diamond shape Reliable grade for high productivity and tool life The CVD-coated T9215 grade combines wear resistance with fracture resistance, making it a reliable choice where consistent productivity is essential. As a CVD-coated carbide insert, it tolerates sustained cutting at production speeds and offers reproducible performance across batches, which helps reduce downtime and tool change frequency. Selecting this grade supports an efficient cost-per-part balance in medium-steel machining without sacrificing process stability. Geometry and clamping: predictable compatibility for accurate results The rhombic DNMG form with a 55° cutting angle and a 0.8 mm corner radius gives a predictable balance of strength and edge detail, suitable for finishing and medium-roughing operations. Compatibility with a given holder is determined by the insert form, clearance angle (0°), tolerance class, fastening method and plate thickness (4.76 mm). The presence of a cylindrical hole and double-sided design extends useable edge count while ensuring reliable screw clamping and repeatable seating in standard DNMG cutters. Chip control and application guidance for consistent surface quality This insert is fitted with a double-sided chipbreaker engineered for chip formation in medium-steel cutting regimes, aiding evacuation and reducing built-up edge. For continuous to slightly interrupted cuts the grade maintains a stable cutting edge and supports good surface finish; choose the chipbreaker and specific cutting data according to workpiece rigidity and stability. When combined with appropriately rated holders and correct cutting parameters, the system improves throughput and reduces the need for secondary finishing. Practical notes on selection and use When specifying inserts, consider holder geometry and the intended operation: external turning, internal turning or profile work will influence the ideal corner radius and chipbreaker selection. The ISO DNMG 150408 format permits straightforward replacement in widely used toolholders, while the T9215 CVD coating extends service life under production conditions. For best results, match grade and chipbreaker to the material and to the stability of the workpiece-fixture system rather than relying solely on maximum cutting speed figures. Contact Metav Werkzeuge today for tailored cutting data, availability and a quotation for Tungaloy DNMG150408 T9215 turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772279 Manufacturer SKU: TUN6772279 Model series: ISO turning indexable inserts Material: Carbide Grade: T9215 Dimensions & geometry Inscribed circle / size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Features & applications CVD-coated carbide (T9215) Rhombic/diamond-shaped insert (DNMG) With cylindrical hole for screw clamping Double-sided chipbreaker Suited to medium steels, continuous to slightly interrupted cuts Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The DNMG150408 T9215 insert is formulated for medium steels, where the T9215 CVD-coated carbide provides a balance of wear and fracture resistance suitable for productive turning. How does the T9215 grade perform under interrupted cuts? T9215 offers good fracture toughness and is appropriate for continuous to slightly interrupted cuts; in heavy interruptions, a grade optimised specifically for high impact resistance should be considered. Will the insert fit my existing DNMG holder? The DNMG150408 geometry is ISO-standard, but compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; ensure the holder matches these parameters for correct seating. How many cutting edges are available on this insert? The rhombic, double-sided design of the DNMG150408 allows multiple indexable edges; the exact count depends on the insert orientation and whether both sides are utilised. What chip control can be expected with this insert? Equipped with a double-sided chipbreaker, the insert promotes reliable chip formation and evacuation in medium-steel turning, aiding surface finish and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, fracture toughness and easy integration for a consistent, productive turning process. Order the insert directly via Metav Werkzeuge or ask the consultants for compatibility advice. DNMG150408 T9215 — ISO indexable turning insert for medium-steel machining, rhombic 0.8 mm radius, Tungaloy DNMG150408 T9215 is an ISO-standard indexable insert designed for external and internal turning; suitable where high productivity and reliable tool life are required CVD-coated carbide for high wear resistance Rhombic insert with 0.8 mm nose radius Double-sided, cylindrical hole, ISO DNMG form Optimised for medium steel and productive turning Engineered for productive medium-steel turning The DNMG150408 T9215 insert employs a CVD-coated cemented carbide substrate in the T9215 grade to combine wear resistance with fracture toughness. This material pairing is intended as a first choice for the machining of medium steel, delivering stable performance under continuous to light interrupted cuts. The coating improves resistance to abrasive wear and reduces the frequency of insert changes, supporting higher component throughput and more predictable production planning. Compatibility and clamping for reliable use in ISO systems Compatibility with the toolholder depends on geometry, clearance angle, tolerance class, fastening and thickness; the rhombic geometry with a 0.8 mm nose radius and 0° clearance requires an appropriate DNMG-style seat. The insert is double-sided and supplied with a cylindrical hole, enabling secure clamping and economical indexable use. The 4.76 mm plate thickness and ISO form factor make it straightforward to integrate into standard external holders or boring bars when the holder matches the ISO DNMG interface and the required tolerance class. Practical machining guidance and expected results Select a chipbreaker and insert orientation that suit the workpiece rigidity and the intended operation to maximise chip control and surface integrity. The T9215 grade balances toughness and abrasion resistance to extend tool life while maintaining a consistent surface finish on medium-steel components. For interrupted cuts or unstable setups, choose more rigid tooling and reduce engagement to avoid edge chipping; in stable, continuous operations the insert supports higher material removal rates and sustained productivity. For application-specific advice on Tungaloy carbide inserts or to confirm holder compatibility for the DNMG150408 T9215, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and stock availability Technical data Article number: 6772260-Tungaloy Manufacturer SKU: TUN6772260 Manufacturer article number: 6772260 Brand: Tungaloy Data Size designation: 150408 Nose radius: 0.8 mm Plate thickness: 4.76 mm Clearance angle: 0° Angle: 55° Special features Grade: T9215 Coating: CVD Material: cemented carbide Plate form: rhombic Mounting: double-sided, cylindrical hole Application: external and internal turning Typical use: continuous to light interrupted cuts Chipbreaker: double-sided FAQ What materials is this insert best suited for? The DNMG150408 T9215 insert is optimised for medium steel; the T9215 grade offers a balance of wear resistance and toughness suitable for productive turning of steel components. How does the coating affect performance? The CVD coating on the T9215 grade improves abrasive wear resistance and contributes to longer service life under continuous cutting, supporting more consistent cycle times. Can this insert be used for internal turning? Yes, the ISO DNMG form and rhombic geometry permit use in both external and internal turning operations when combined with a suitable holder that accommodates the DNMG seating and clearances. How is compatibility with a holder determined? Compatibility is determined by insert shape, clearance angle (0°), tolerance class, fastening method and plate thickness; matching these parameters with the toolholder ensures correct clamping and performance. Is the insert indexable and economical to use? The insert is double-sided with a cylindrical hole for secure clamping, allowing multiple indexings and cost-effective use in production environments. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9225 and a 55° rhombic geometry for robust medium-to-heavy steel turning; this insert delivers stable chip formation and increased toughness for interrupted cuts. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG 150408 T9225 Turning insert – Tungaloy (CVD-coated carbide, 55°) DNMG 150408 T9225 is a rhombic, double-sided turning insert for industrial turning operations, optimised for medium-to-heavy steel machining CVD-coated carbide grade T9225 Universal grade for medium to heavy steel Rhombic 55° geometry with 0.8 mm corner radius Double-sided insert with cylindrical hole Consistent cutting performance for demanding steel applications The CVD-coated carbide T9225 grade is formulated as a robust, universal option where variable engagement or slight interruptions demand additional toughness. The coating improves resistance to flank wear while the substrate maintains edge strength, resulting in stable chip formation and predictable tool life during both external and internal turning. For shops aiming to reduce downtime, this combination supports reliable batch-to-batch performance and fewer unplanned insert changes. Geometry and mounting that support precision and versatility The rhombic 55° geometry with a 0.8 mm corner radius provides a balance between profile control and cutting edge strength. The insert's 0° relief angle and a thickness of 4.76 mm contribute to a stable clamping arrangement when used with a compatible holder or boring bar. The cylindrical hole enables secure fastening and ensures repeatable seating; being double-sided effectively doubles the number of usable cutting edges, which optimises cost per edge in production environments. Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness. Practical benefits for process reliability and tool economy Select the appropriate chipbreaker and grade based on the workpiece material and machining stability: the universal character of this grade simplifies tooling inventories while offering strong performance across a wide range of steels. For interrupted cuts or variable engagement, the enhanced toughness reduces the risk of edge chipping, and the coated surface supports higher cutting speeds with sustained surface finish quality. Together, these attributes contribute to predictable tool life and efficient production cycles. Contact Metav Werkzeuge today for a tailored recommendation on Tungaloy inserts and to discuss the best holder and chipbreaker for the intended turning application; eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: 6780664 Manufacturer SKU: TUN6780664 Metav SKU: 6780664-Tungaloy Name: DNMG150408 T9225 Tungaloy turning insert Core data Geometry angle: 55° Corner radius: 0.8 mm Relief angle: 0° Thickness: 4.76 mm Size: 15 mm Special features Material: carbide Coating: CVD Grade: T9225 Shape: rhombic (diamond) Hole: cylindrical hole (with hole) Sidedness: double-sided Application: turning; suitable for medium to heavy steel machining FAQ What materials is this insert designed for? The Tungaloy DNMG 150408 T9225 insert is designed primarily for medium to heavy steel machining; its universal T9225 grade offers toughness and wear resistance suited to these materials. How does the insert’s geometry affect cutting performance? The rhombic 55° geometry and 0.8 mm corner radius provide a compromise between profile accuracy and edge strength, enabling controlled finishes and improved resistance to chipping under varying engagement. Is the insert compatible with all DNMG holders? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; ensure the holder matches these specifications for correct seating and secure clamping. What advantages does the CVD coating provide? The CVD-coated carbide surface increases resistance to flank wear and supports higher cutting parameters while the substrate maintains core toughness for interrupted cuts. How many cutting edges are available per insert? As a double-sided DNMG insert, the component provides multiple usable edges, which improves cost efficiency per cutting edge in production settings. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness and a 55° rhombic form for consistent medium-to-heavy steel turning; the robust grade T9225 supports interrupted cuts and variable engagement, while ISO compatibility ensures quick insert changes — order this turning insert directly via Metav Werkzeuge or consult the Metav team for application advice. DNMG150408 T9225 — Tungaloy turning insert for turning, ISO 55° rhombic The DNMG150408 T9225 is an ISO-standard rhombic turning insert engineered for medium-to-heavy steel turning, offering a robust universal grade and CVD coating for improved tool life. CVD-coated carbide for enhanced wear resistance ISO-standard rhombic form, 55° cutting angle Robust universal grade for medium-to-heavy steel Double-sided chipbreaker with cylindrical hole Consistent cutting performance for demanding steel operations The combination of a CVD-coated carbide substrate and the T9225 grade delivers a pragmatic balance of hardness and toughness, designed to withstand the variable loads encountered during medium-to-heavy steel turning. This composition improves resistance to flank wear while maintaining edge stability during light interruptions, so machining cycles remain predictable. The result is fewer unscheduled insert changes and more reliable cycle times, supporting higher productivity in mixed-production environments. Faster tool changes and stable geometries for predictable results Built to the ISO specification, the rhombic 55° geometry ensures compatibility with a wide range of external holders and boring bars, reducing downtime during tool swaps. The standardized form, relief angle and tolerance class simplify tooling logistics and enable repeatable clamping that preserves the intended cutting geometry. This stability translates directly into consistent dimensional accuracy and surface finish, making the system suited to batch production or series turning where repeatability matters. Practical set-up guidance to exploit the insert’s advantages The insert’s 0.8 mm corner radius and double-sided chipbreaker support a broad range of feed rates and depths of cut while the cylindrical hole ensures secure clamping. With a plate size of 15 mm and a plate thickness of 4.76 mm, the insert suits holders designed for this ISO size; selecting an appropriate chipbreaker and matching holder rigidity will further extend component quality and tool life. For interrupted cuts or variable engagement, the robust universal grade reduces the risk of chipping, while correct coolant application and cutting data adapted to steel help to maximise productivity. For reliable, application-oriented supply of Tungaloy turning inserts such as the DNMG150408 T9225, contact Metav Werkzeuge for availability and tailored cutting recommendations at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6780922 Manufacturer SKU: TUN6780922 SKU: 6780922-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: T9225 Facts ISO designation: 150408 Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 0° Special features Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning Schneidstofftyp: CVD-beschichtetes Hartmetall FAQ What materials is this insert suited for? The DNMG150408 T9225 is optimised for medium-to-heavy steel turning; the Tungaloy T9225 grade provides toughness for variable engagement and light interruptions. How does the insert’s geometry benefit production runs? The 55° rhombic form and ISO conformity allow fast, repeatable tool changes and consistent clamping, which supports stable dimensional accuracy across series production. Is the DNMG150408 T9225 reversible? Yes, the insert is double-sided with a chipbreaker on both sides, enabling two indexed cutting edges per insert height before replacement. Which holder types are compatible with this insert? Compatibility depends on holder form, relief angle and tolerance class; the ISO designation and rhombic shape match standard DNMG external holders and suitable boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a robust CVD-coated carbide grade, a precise 55° geometry and a secure cylindrical-hole fixing for reliable medium-to-heavy steel turning; order genuine inserts via Metav Werkzeuge or consult our specialists for application advice. DNMG 150408 T9225 Turning Insert — Tungaloy (rhombic, CVD-coated carbide, 55°) The DNMG150408 T9225 Tungaloy insert is an ISO-standard rhombic indexable insert designed for external and internal turning of steels, offering high toughness for interrupted cuts and variable engagement conditions. CVD-coated carbide universal grade T9225 Rhombic 15 mm format, 55° lead angle 0.8 mm corner radius for robust edge strength Cylindrical-hole fixation, double-sided chipbreaker Consistent performance for medium-to-heavy steel turning The combination of a CVD-coated carbide substrate and the T9225 grade provides a balance of toughness and wear resistance that suits a wide range of steel turning tasks. The coating reduces flank wear and improves edge stability, while the substrate ensures resistance to chipping under variable cutting conditions. In practice, this means fewer unscheduled indexings and a steadier surface finish when machining bar and shaft workpieces. The 0.8 mm corner radius contributes to a stronger cutting edge and better load distribution during heavier depths of cut. Designed for dependable holder compatibility and secure clamping The insert follows ISO dimensions and the compatibility with toolholders is governed by form, clearance angle, tolerance class, fastening type, size and thickness. The rhombic form and 55° lead angle make the insert suitable for both external profiling and internal shoulder work, while the cylindrical hole and standard fixing ensure repeatable clamping. For shops integrating new tooling, the ISO designation simplifies procurement and reduces setup variability; selecting the matching external holder or boring bar and correct clamp is the decisive step for safe and precise use. Productivity advantages and predictable tool life Optimised for medium-to-heavy steel cutting, this insert’s geometry and double-sided chipbreaker help to control chips and maintain a consistent cutting force, which stabilises feeds and depths of cut. The result is improved process reliability and, over production runs, a favourable cost-per-component ratio. Where interrupted cuts occur, the enhanced toughness of the grade minimises edge degradation, supporting longer intervals between indexings and less operator intervention — practical benefits for batch production and mixed-series workflows. Practical handling, indexing and system setup The insert is double-sided and indexable, allowing reversal to a fresh cutting edge when the active edge becomes worn; this multiplies useful cutting edges per insert and reduces tooling stock on the shop floor. With a plate thickness of 4.76 mm and a standard 15 mm inscribed circle, replacements and inventory management are straightforward. Compatibility notes and the suggested system build include the ISO insert, a matching external holder or boring bar, a seating pad/clamp set and replacement screws — ensuring all components meet tolerance and fastening requirements for secure operation. For tailored machining recommendations or to secure genuine Tungaloy DNMG150408 T9225 inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holders, cutting parameters and availability. Technical Data Article number: 6780813 Manufacturer SKU: TUN6780813 Stock SKU: 6780813-Tungaloy Model series: ISO turning indexable inserts Material: carbide (Hartmetall) Grade / coating: T9225, CVD-coated carbide ISO designation: DNMG150408 Application: turning (external and internal) Facts Inscribed circle / size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance / relief angle: 0° Lead / approach angle: 55° Special features Rhombic plate form Cylindrical hole fixing Double-sided chipbreaker Universal grade for medium-to-heavy steel machining Compatible with ISO-standard external holders and boring bars Suited for interrupted cuts and variable engagement conditions System components: insert, holder/boring bar, seating pad/clamp set, replacement screws FAQ What steels is this insert suited for? The DNMG150408 T9225 insert is formulated as a robust universal grade for medium-to-heavy steel machining and performs well under variable engagement or slightly interrupted cuts. How does the T9225 grade affect tool life? Tungaloy’s T9225 grade combines toughness with wear resistance; the CVD coating reduces flank wear while the substrate resists chipping, resulting in predictable tool life under demanding steel turning conditions. Is the insert reversible and how many cutting edges are available? The insert is double-sided and indexable; reversing the insert provides additional cutting edges, multiplying usable edges per insert and lowering tooling cost per edge. What holder features are required for correct compatibility? Compatibility depends on the holder matching the ISO form, clearance angle, tolerance class, fastening method, size and thickness; choose a holder designed for DNMG inserts with cylindrical-hole clamping for secure fixation. Can this insert be used for finishing passes? While optimised for medium-to-heavy cuts, the geometry and coating can deliver acceptable surface finishes; for fine finishing, consider smaller corner radii and optimised feeds/slower cutting speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
DNMG 150408 T9225 Tungaloy-Wendeplatte für Drehen Die DNMG 150408 T9225 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen mit robuster Universalsorte für mittlere bis schwere Stahlbearbeitung DNMG150408 rhombische Wendeplatte, 55° Schneidwinkel CVD-beschichtetes Hartmetall Sorte T9225 für Stahl Doppelseitiger Spanbrecher, zylindrisches Loch Plattendicke 4,76 mm, Eckenradius 0,8 mm ISO-genormt, universell für Außen- und Innendrehen Robuste Performance bei wechselnden Schnittbedingungen Die DNMG150408 wurde für anspruchsvolle Stahlbearbeitung entwickelt und kombiniert CVD-Beschichtung mit einem zähigkeitsorientierten Schneidstoff. Diese Kombination sorgt für erhöhte Standzeit bei leicht unterbrochenem Schnitt und wechselnden Eingriffsbedingungen. Der doppelseitige Spanbrecher unterstützt dabei eine kontrollierte Spanabfuhr, wodurch die Prozesssicherheit und die Wiederholgenauigkeit in der Serienfertigung steigen. Sichere Einsetzbarkeit und einfache Kompatibilität Die ISO-Genormung macht die Platte zur unkomplizierten Lösung für viele Haltersysteme; die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die rhombische Platte mit 55° Schneidwinkel und zylindrischem Loch gewährleistet eine stabile Befestigung und einfachen Werkzeugwechsel. Anwender profitieren von vorhersehbaren Einbaumaßen und reduzierten Rüstzeiten. Wirtschaftlicher Nutzen für den Produktionsalltag Dank der robusten Sorte T9225 erhöhen sich Standzeit und Ausbeute pro Schneideinsatz, was Werkzeugkosten senkt und Stillstandszeiten reduziert. Die doppelseitige Ausführung bietet zwei nutzbare Schneidkanten pro Platte, was die Ersatzteilhäufigkeit verringert. In Summe führt das zu höherer Produktivität und planbarer Kostenstruktur in der Zerspanung. Praxisnahe Hinweise für den Einsatz Für optimales Ergebnis sollte die Platte mit einem passenden Außenhalter oder einer Bohrstange genutzt werden; Unterlage, Klemmsatz und Ersatzschrauben sind prüfungsrelevante Komponenten. Die Sorte T9225 ist speziell für mittlere bis schwere Stahlbearbeitung ausgelegt; Spanformer und Schnittdaten sind an Werkstoff und Stabilität anzupassen. So lassen sich Oberflächengüte und Werkzeugleben gezielt optimieren. Sichern Sie sich die Leistungsfähigkeit der Tungaloy-T9225 Wendeplatte und fordern Sie eine individuelle Schnittempfehlung bei Metav Werkzeuge an: info@metav-werkzeuge.com | +49 2822 7131930 Produktmerkmale Artikelnummer: 6780728 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten SKU Hersteller: TUN6780728 Bezeichnung: DNMG150408 Daten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 15 mm Winkel: 55° Besonderheiten Material: Hartmetall Beschichtung: CVD beschichtet (Sorte T9225) Sorte: T9225 Plattenform: rhombisch Spanbrecher: doppelseitig Loch: zylindrisches Loch Einsatz: Drehen FAQ Für welche Werkstoffe ist die Platte geeignet? Die DNMG150408 Tungaloy-Wendeplatte mit Sorte T9225 ist ausgelegt für mittlere bis schwere Stahlbearbeitung und bietet gute Zähigkeit bei leicht unterbrochenem Schnitt. Wie viele Schneidkanten bietet die Platte? Durch die doppelseitige Ausführung stehen zwei nutzbare Schneidkanten zur Verfügung, was den Verschleißzyklus verlängert und Ersatzzyklen reduziert. Welche Vorteile bringt die CVD-Beschichtung? Die CVD-Beschichtung der Tungaloy-Sorte T9225 verbessert die Verschleißfestigkeit und erhöht die Standzeit bei abrasiven und wechselnden Schnittbedingungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust cutting performance, wide material applicability and straightforward holder compatibility to maintain steady production in steel turning. The CVD-coated carbide grade T9225, together with the 0.8 mm corner radius and a double-sided chipbreaker, delivers consistent results under variable engagement; order directly via Metav Werkzeuge or consult the team for matching holders and clamping sets. DNMG 150408 T9225 DNMG150408 Tungaloy turning insert — CVD‑coated carbide, 0.8 mm radius A DNMG150408 T9225 indexable turning insert engineered for medium-to-heavy steel turning, compliant with ISO standards and compatible with ISO-specified external holders and boring bars. CVD-coated carbide grade T9225 Robust for medium to heavy steel turning 0.8 mm corner radius for versatile finishing Double-sided chipbreaker with cylindrical hole Reliable performance for demanding steel turning The CVD-coated carbide grade T9225 is designed as a robust universal solution for medium-to-heavy steel machining, offering a balance of toughness and wear resistance that copes with slightly interrupted cuts and changing engagement conditions. The geometry of this indexable insert and its double-sided chipbreaker reduce the risk of built-up edge and stabilise chip formation, which contributes to predictable tool life and fewer unplanned tool changes. Compatibility with ISO toolholders ensures straightforward retrofitting into existing tool systems, helping to maintain process continuity on multi-shift shop floors. Clear mounting and dimensional benefits to simplify setup The insert follows ISO designation DNMG150408, with a rhombic 15 mm form, 4.76 mm thickness and a cylindrical hole for positive clamping. The 0° relief angle and the 55° included angle deliver defined cutting geometry that eases setup and repeatability across tool assemblies. These measurable parameters allow a rapid selection of matching holders by specification—shape, clearance angle, tolerance class, fastening and thickness—so that fixture checks become a routine verification rather than a trial-and-error task. Practical advantages: process security and efficiency gains Using a grade optimised for stability in chip formation and consistent edge life supports faster ramp-up to productive cutting parameters, which can translate into lower cycle time per component and reduced tooling consumption over production batches. The 0.8 mm corner radius is versatile for both semi-finishing and finishing passes, reducing the need for multiple specialised inserts. Combined with the insert’s geometry and coating, this leads to improved surface quality and fewer rework operations, helping to protect throughput and margins in demanding turning operations. For application guidance, holder matching or to check stock availability of the Tungaloy DNMG150408 T9225 insert (SKU 6944577-Tungaloy), contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — the team provides practical advice for integration into existing tool systems. Technical Data Article number: 6944577 Manufacturer SKU: TUN6944577 SKU: 6944577-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Dimensions & Angles Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 15 mm Included angle: 55° Relief angle: 0° Design & Features ISO designation: DNMG150408 Grade: T9225 (CVD-coated carbide) Chipbreaker: double-sided Hole: with cylindrical hole Plate form: rhombic Application: Turning FAQ What materials is this insert suitable for? The DNMG150408 T9225 insert from Tungaloy (SKU 6944577-Tungaloy) is a universal, robust grade tailored primarily for medium-to-heavy steel turning and performs reliably under slightly interrupted cuts. How is holder compatibility determined for this insert? Compatibility is determined by the ISO plate form and measurable parameters such as form, relief angle, tolerance class, fastening style, plate size and thickness; the ISO-compliant DNMG150408 fits holders specified for that designation. Is the insert reversible and how many cutting edges are available? The insert is double-sided with a chipbreaker on both faces, offering multiple effective edges before indexing, which supports extended service life per insert. What corner radius and thickness does the insert have, and what does that mean for finish? With a 0.8 mm corner radius and 4.76 mm thickness, the insert provides good versatility between semi-finishing and finishing, enabling consistent surface quality while retaining strength at the cutting edge. Does the DNMG150408 include a hole for clamping? Yes, the plate is supplied with a cylindrical hole to ensure secure, repeatable clamping in compatible toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Take advantage of the robust CVD‑coated carbide (T9225) and the 0.8 mm corner radius for stable chip formation and long tool life in medium to heavy steel turning; order directly via Metav Werkzeuge or consult the team for application advice. DNMG150408 T9225 DNMG Turning Insert — Tungaloy, rhombic 55° with 0.8 mm radius DNMG150408 T9225 is an ISO‑standard rhombic turning insert designed for external and internal turning in demanding steel applications. ISO‑standard rhombic 55° geometry CVD‑coated carbide grade T9225 0.8 mm corner radius for robust edge Double‑sided chipbreaker with cylindrical hole Productivity gains for medium to heavy steel turning The proven CVD‑coated carbide grade T9225 provides a balance of toughness and wear resistance, making it suitable for medium to heavy steel machining and for operations involving light interruption. The coating enhances thermal stability and reduces flank wear, which translates into longer tool life and fewer indexings. As a result, cycle times are stabilised and machine uptime improves, delivering measurable gains in process efficiency without sacrificing surface quality. Reliable fit and dimensional clarity with ISO geometry The rhombic 55° geometry and ISO designation ensure predictable seating in standard holders; compatibility is governed by form, clearance angle, tolerance class, attachment method, size and thickness. With a 0° clearance angle, an inscribed circle of 15 mm and a plate thickness of 4.76 mm, this insert integrates into common tooling systems when the corresponding holder and clamping set match these dimensions. Clear reference to these attributes simplifies procurement and reduces setup time on the shop floor. Edge strength and chip control for consistent finishes A 0.8 mm corner radius provides a robust cutting edge that withstands varying engagement conditions and intermittent cuts, while the double‑sided chipbreaker aids in forming short, controllable chips for steel. Together these features contribute to improved surface integrity and repeatable part quality. The cylindrical hole assists reliable clamping and consistent seat positioning, which supports stable cutting conditions and reduces vibration-related tool wear. Practical selection guidance and system components When selecting grade and chipbreaker, pair the insert with a holder suited to the intended depth of cut and rigidity of the setup. For external and internal turning operations the system typically comprises the ISO turning insert, a matching external holder or boring bar, a support shim/clamping set and replacement screws. Choose the chipbreaker and the T9225 grade when process stability and a broad material range are priorities; alternative grades or finer radii are preferable where lighter cuts or finer surface finish are required. Discuss Tungaloy grade suitability and secure the required DNMG150408 T9225 inserts with Metav Werkzeuge for prompt availability and tailored technical guidance Technical Data Article number: 6780779 SKU: 6780779-Tungaloy Manufacturer SKU: TUN6780779 Brand: Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts Geometry angle: 55° Inscribed circle: 15 mm Corner radius: 0.8 mm Thickness: 4.76 mm Clearance angle: 0° Hole style: cylindrical hole Special features CVD‑coated carbide, grade T9225 Double‑sided chipbreaker Rhombic plate form ISO‑standard insert designation DNMG150408 Suitable for external and internal turning Compatibility determined by form, clearance, tolerance, attachment, size, thickness FAQ Is this insert compatible with all DNMG holders? Compatibility depends on the holder design; the DNMG150408 T9225 insert fits holders that accept ISO‑standard rhombic DNMG inserts with matching 55° geometry, plate thickness and fastening method. Which materials suit the T9225 grade best? The Tungaloy T9225 grade is intended for medium to heavy steel machining and performs well under varying engagement conditions and light interruptions. Can the insert be indexed to use both cutting edges? Yes, the insert is double‑sided; the DNMG150408 format allows indexation to present a fresh edge when the active edge is worn. How does the 0.8 mm corner radius affect cutting? A 0.8 mm corner radius increases edge strength and improves resistance to mechanical shock, supporting stable cuts and better surface finish in robust turning operations. What system components are required for correct mounting? A compatible external holder or boring bar, a support shim/clamping set and matching screws are required to secure the DNMG150408 Tungaloy insert properly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade T9225 and a 0.8 mm corner radius for consistent medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150408 T9225 — Indexable turning insert for turning, CVD-coated carbide, 55° rhombic form (Tungaloy) A DNMG150408 T9225 indexable turning insert engineered for medium-to-heavy steel turning, featuring a 55° rhombic geometry and a robust double-sided chipbreaker for interrupted and continuous cuts. CVD-coated carbide grade T9225 for steel machining 55° rhombic form for versatile turning operations 0.8 mm corner radius for reliable finishing Double-sided chipbreaker with cylindrical hole for secure fitting Higher productivity for medium-to-heavy steel turning The combination of CVD-coated carbide and the specially formulated T9225 grade delivers a balance of toughness and wear resistance suited to variable cutting conditions. The 55° rhombic geometry allows stable cutting on external and internal diameters, while the 0.8 mm corner radius supports consistent surface quality during finishing passes. This configuration reduces insert changes and contributes to uninterrupted production cycles, making the component a pragmatic choice for busy turning centres. Controlled chips and secure seating reduce process variance A double-sided chipbreaker engineered for general-purpose turning ensures predictable chip formation across differing feeds and depths of cut. The insert's cylindrical hole and standardised clamping interface provide positive seating and repeatable positioning in ISO-compatible holders. The declared 0° relief angle aids form accuracy on the machined contour. Together, these features lower the risk of unexpected interruptions and simplify setup verification in the workshop. ISO compatibility and easier tool management at the bench As an ISO-standard indexable insert, this component integrates into common tool systems: an appropriate external holder or boring bar, shim/clamp set and replacement fastening screws complete the assembly. The 4.76 mm thickness and 15 mm size reflect standard dimensions that ease inventory management and enable straightforward interchangeability. The insert's reversible, double-sided design doubles usable life per unit, improving cost-efficiency and reducing machine downtime. Longer tool life and lower maintenance needs The CVD coating on a carbide substrate provides enhanced resistance to abrasive wear and thermal loading, supporting consistent edge life even under slightly interrupted cuts. The robust composition and chip control reduce the frequency of dressing and inspection, while the indexable format simplifies replacement without lengthy regrinding. The result is a durable, low-maintenance solution that supports reliable, repeatable machining results in demanding steel applications. For reliable medium-to-heavy steel turning, request the Tungaloy DNMG150408 T9225 via Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application support Technical data Article number: 6780811 Manufacturer SKU: TUN6780811 Article name: DNMG150408 T9225 Tungaloy indexable insert Manufacturer: Tungaloy Core data Form angle: 55° Corner radius: 0.8 mm Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Materials & features Carbide substrate CVD-coated, grade T9225 Double-sided chipbreaker Rhombic plate form Cylindrical centre hole ISO-standard turning insert; compatible with ISO holders FAQ What materials is this insert intended for? The DNMG150408 T9225 insert is designed primarily for steel machining, offering robust performance in medium-to-heavy turning tasks thanks to its CVD-coated carbide composition. Can this insert be used for interrupted cuts? Yes. The T9225 grade and the insert’s geometry provide added toughness for slightly interrupted cuts, making it suitable for variable engagement conditions. How is the insert secured in the holder? The insert features a cylindrical centre hole and matches ISO clamping systems; secure seating is achieved using the appropriate shim/clamp set and fastening screws in a compatible holder. Is the insert reversible and economical to use? The component is double-sided, enabling two indexed cutting edges per sided insert, which improves economy by extending usable edge life before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
DNMG150408 T9225 Tungaloy-Wendeplatte für Drehen DNMG150408 T9225 – Robuste ISO-genormte Drehwendeschneidplatte, ausgelegt für mittlere bis schwere Stahlbearbeitung und wechselnde Eingriffsbedingungen Hohe Prozesssicherheit durch stabile Spanformung CVD-beschichtetes Hartmetall für lange Standzeit Universelle Eignung für Außen- und Innendrehen Rhombische Plattenform mit 55° Winkel für Vielseitigkeit Produktivität erhöhen durch robuste Universalsorte Die T9225-Sorte überzeugt als CVD-beschichtetes Hartmetall mit einer ausgewogenen Kombination aus Verschleißwiderstand und Zähigkeit. Diese Materialkombination reduziert Werkzeugwechsel und Stillstandzeiten und sorgt so für eine spürbare Steigerung der Produktivität in der Fertigung. Im Vergleich zu rein verschleißorientierten Sorten bietet der Typ Vorteile bei leicht unterbrochenen Schnitten und wechselnden Schnittbedingungen, weil die Spanbildung stabil bleibt und Eckenbelastungen besser abgefedert werden. Für Anwender bedeutet das: weniger Ausschuss, konstantere Oberflächengüte und planbare Fertigungsintervalle. Einfache Integration in ISO-Systeme und sichere Spannbarkeit Die Platte ist ISO-genormt und lässt sich dank klar definierter Form-, Freiwinkel- und Dickentoleranzen unkompliziert in bestehende Haltersysteme einbauen. Die rhombische Plattenform mit 55° Spitzenwinkel ermöglicht flexible Einsatzwinkel und erleichtert die Werkzeugbestückung bei Außen- und Innendrehen. Achten auf Kompatibilität in Bezug auf Befestigung, Größe und Dicke gewährleistet reproduzierbare Spannkraft und damit stabile Schnittverhältnisse. Durch die Möglichkeit, Unterlage/Klemmsatz und Ersatzschrauben bereitzuhalten, wird die Werkzeugaufnahme in der Werkstatt zum planbaren Routineprozess. Werkstofffokussierte Anwendung und Schneidkantenpflege Die T9225-Sorte ist speziell für die Bearbeitung von Stahl konzipiert und empfiehlt sich, wenn mittlere bis schwere Zerspanungsaufgaben anfallen. Der Eckenradius 0,8 mm erlaubt sichere Einstiche und sorgt für robuste Schneidkanten bei belastenden Schnitten. Der doppelseitige Spanbrecher unterstützt kontrollierte Spanauslenkung und verbessert Oberflächenergebnis und Spanbruchverhalten. Für optimale Ergebnisse empfiehlt sich die Abstimmung von Vorschub und Schnittgeschwindigkeit auf die Sorteneigenschaften; so lässt sich die Lebensdauer der Schneidkante maximieren und die Prozesssicherheit weiter erhöhen. Empfehlung: Für wirtschaftliche Stahlzerspanung die DNMG150408 T9225 von Tungaloy über Metav Werkzeuge beziehen; bei technischen Fragen oder individuellen Schnittdaten gern Kontakt aufnehmen unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6780796 Hersteller SKU: TUN6780796 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: DNMG150408 Fakten Plattendicke: 4,76 mm Plattengröße: 15 mm Winkel: 55° Eckenradius: 0,8 mm Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD = chemische Dampfabscheidung, verschleißfest) Sorte: T9225 (robuste Universalsorte für mittlere bis schwere Stahlbearbeitung) Plattenform: rhombisch Spanbrecher: doppelseitig Lochstil: zylindrisches Loch Einsatz: Drehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Werkstoffe lassen sich mit der Platte bearbeiten? Die DNMG150408 T9225 von Tungaloy ist primär für die Bearbeitung von Stahl ausgelegt; dank der robusten Universalsorte eignet sie sich insbesondere für mittlere bis schwere Zerspanung und wechselnde Schnittbedingungen. Wie beeinflusst die CVD-Beschichtung die Standzeit? Die CVD-Beschichtung der T9225 erhöht den Verschleißwiderstand und sorgt für konstante Schneidkantenstabilität, wodurch sich die Standzeit gegenüber unbeschichteten Platten deutlich verbessert. Ist die Platte für Innen- und Außendrehen geeignet? Ja, die rhombische Form und der 55° Spitzenwinkel machen die Platte vielseitig einsetzbar für Außen- und Innendreharbeiten bei passenden Haltern. Welche Rolle spielt der Eckenradius von 0,8 mm? Der Eckenradius 0,8 mm bietet eine gute Balance zwischen Schneidkantenstärke und Detailgenauigkeit; er ist besonders vorteilhaft bei belasteten Schnitten und reduziert das Risiko von Kantenbruch. Welche Komponenten benötigt die Spannsystemintegration? Für den sicheren Einsatz werden passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und die geeigneten Ersatzschrauben benötigt, da Kompatibilität über Form, Befestigung und Dicke definiert wird. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide toughness, precise ISO-compliant geometry and a double-sided chipbreaker for reliable medium-to-heavy steel turning. Order the insert directly via Metav Werkzeuge or consult the technical team if additional machining data is required. DNMG 150408 T9225 indexable turning insert – Tungaloy DNMG 150408 T9225 is an ISO-form indexable insert designed for robust external and internal turning in steel applications CVD-coated carbide grade T9225 55° rhombic geometry for versatile cuts Double-sided chipbreaker for stable chips Cylindrical hole; 4.76 mm plate thickness Consistent performance from a CVD-coated carbide grade The CVD-coated carbide composition of this insert provides a balance of wear resistance and toughness that suits medium-to-heavy turning. The T9225 grade was developed for situations with variable engagement or slightly interrupted cuts where additional edge resilience is needed. CVD (chemical vapour deposition) layers increase surface hardness and thermal stability; in practice this reduces flank wear and extends component life, which supports predictable tool-change intervals and fewer production interruptions. Geometry and size that simplify holder compatibility The ISO rhombic form with a 55° included angle and a 0° relief specification ensures broad compatibility with standard turning holders. The plate dimensions — 15 mm inscribed size and 4.76 mm thickness — match common ISO indexable systems; the cylindrical centre hole enables secure clamping and straightforward indexing. These geometric details translate to secure seating in the toolholder, reduced vibration and improved repeatability between insert changes. Chip control and edge security for demanding cuts A double-sided chipbreaker combined with a 0.8 mm corner radius gives reliable chip formation and edge strength during interrupted or heavy passes. The chipbreaker is tuned to guide swarf away from the cutting zone, lowering the risk of re-cutting and improving surface finish. The result is fewer process deviations and a higher first-time-right rate, which benefits cycle-time stability and reduces downstream rework. Contact Metav Werkzeuge today for availability and advice on optimising production with Tungaloy turning inserts – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780705 Manufacturer SKU: TUN6780705 Model series: ISO turning indexable inserts Product name: DNMG150408 T9225 Tungaloy insert Material: carbide Facts Angle: 55° Corner radius: 0.8 mm Plate thickness: 4.76 mm Inscribed size: 15 mm Relief angle: 0° Hole: with cylindrical hole Special features Grade: T9225 Coating: CVD Chipbreaker: double-sided Plate shape: rhombic Application: turning (external and internal) Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials are suitable for this insert? The DNMG150408 T9225 insert is formulated for steel machining; its T9225 CVD-coated carbide composition targets medium-to-heavy steel turning with good wear resistance. Can the insert be used for interrupted cuts? Yes, the T9225 grade and the 0.8 mm corner radius provide increased toughness for lightly interrupted cuts and varying engagement conditions. How is chip control achieved with this geometry? The double-sided chipbreaker on the insert channels swarf away from the cutting zone, improving surface finish and reducing the chance of re-cutting chips. Is the insert compatible with standard ISO holders? The rhombic form, 55° geometry and the cylindrical centre hole make the insert compatible with ISO-standard turning holders that match these dimensions. What is the benefit of the CVD coating on this insert? The CVD coating increases surface hardness and thermal stability, which reduces wear under higher temperatures and extends effective tool life for the DNMG150408 T9225 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated T9225 grade and the ISO rhombic DNMG geometry for dependable medium-to-heavy steel turning; compatibility with standard holders is ensured by the insert form, 0° clearance angle and cylindrical-hole mounting. Order the DNMG150408 directly via Metav Werkzeuge or consult the advisers for application-specific recommendations. DNMG 150408 T9225 – Turning insert for medium-to-heavy steel machining (Tungaloy) The DNMG150408 T9225 insert is a CVD-coated, carbide indexable insert designed for robust external and internal turning applications. ISO DNMG rhombic format for wide compatibility CVD-coated T9225 grade for robust steel turning Double-sided chipbreaker for reliable chip control 0° clearance angle with cylindrical hole mounting Consistent performance under variable cutting conditions The combination of a CVD-coated surface and the T9225 carbide composition delivers a balanced hardness-to-toughness ratio suited to varied engagement conditions. This makes the insert particularly effective where interrupted cuts or fluctuating feed demands occur. The coating reduces flank wear and improves tool life, while the substrate retains impact resistance; together these factors promote predictable process stability and fewer unscheduled tool changes. Fast, repeatable clamping and minimal setup time The ISO rhombic geometry and standardised attachment features ensure that the insert seats reliably in compatible holders. The presence of a cylindrical hole and the specified thickness (4.76 mm) facilitate repeatable mounting and safe torque transmission with standard clamping kits. Reduced setup time and straightforward replacement lead to increased machine uptime and quicker return to production after tool changes. Improved chip control and surface integrity A double-sided chipbreaker integrated into the insert geometry supports consistent chip formation across a range of cutting parameters. This improves evacuation in both external and internal turning and reduces the risk of re-cutting chips. The rhombic shape, combined with a 0° clearance angle, provides an advantageous edge strength that helps achieve reliable dimensional accuracy and surface finish on medium-to-heavy steel components. Clear selection criteria for reliable outcomes For external or internal turning, select the chipbreaker and grade to match material, cut depth and machine rigidity; the DNMG150408 insert is aimed at medium-to-heavy steel machining where robustness and repeatable performance are priorities. Choose a matching ISO-compliant holder that accounts for form, tolerance class, size and thickness to ensure optimal compatibility and safe operation. For uncertain applications, technical specification checks are recommended before final selection. Contact Metav Werkzeuge for availability and application advice on Tungaloy turning inserts and to obtain tailored recommendations for specific machining tasks Technical data Article number: 6780769 Manufacturer SKU: TUN6780769 SKU: 6780769-Tungaloy Manufacturer: Tungaloy Dimensions and core data Shape: rhombic (DNMG) Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Insert ISO designation: 150408 Included hole: with cylindrical hole Included angle: 55° Features and compatibility Material: carbide Coating: CVD Grade: T9225 Chipbreaker: double-sided Model series: ISO turning indexable inserts Application: turning Typical system setup: insert, compatible external holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert suitable for? The DNMG150408 T9225 insert is formulated for medium-to-heavy steel machining; the T9225 grade offers toughness for interrupted cuts and variable engagement. How does the T9225 grade affect tool life? The CVD-coated T9225 grade combines wear resistance with toughness, which extends effective tool life under common turning loads while maintaining stable chip formation. Is the insert reversible or single-use per edge? The rhombic DNMG format is double-sided with a double-sided chipbreaker, allowing use of multiple cutting edges to maximise productivity. What holder characteristics are required for compatibility? Compatibility depends on the insert form, clearance angle (0°), tolerance class, fastening method, size and thickness; a matching ISO DNMG holder or appropriate boring bar is required. Can this insert be used for finishing and roughing? Yes, with appropriate selection of chipbreaker and cutting parameters the insert supports both finishing and heavier roughing operations in steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide durability and an ISO‑standard DNMG150408 form for reliable medium‑to‑heavy turning operations; the double‑sided, rhombic design with a 0.8 mm corner radius reduces tool changes and improves process stability. Order through Metav Werkzeuge or consult our specialists for application guidance. DNMG150408 T9225 DNMG Turning Insert for Turning – CVD‑coated carbide, 0.8 mm radius (Tungaloy) A DNMG150408 T9225 indexable insert designed for ISO‑standard external and internal turning, offering robustness for mixed and slightly interrupted cuts in steel machining. ISO‑standard DNMG150408 form CVD‑coated carbide grade T9225 Double‑sided with cylindrical hole 0.8 mm corner radius and 0° clearance Consistent cutting performance for mixed turning conditions The CVD‑coated carbide substrate of this insert provides a balance of wear resistance and toughness, making it suitable for medium‑to‑heavy steel machining where variable engagement or light interruptions occur. The T9225 grade is formulated to keep an active cutting edge under changing cutting forces, reducing the frequency of insert changes and stabilising cycle times. The rhombic geometry at a 55° angle supports both external and internal operations, while the double‑sided layout means a predictable replacement rhythm and efficient tool usage. By selecting this grade and geometry, production can benefit from improved component quality and fewer unscheduled stops. Easy system integration and predictable tool set‑up Compatibility depends on form, clearance, tolerance class, fixing method, size and thickness; the DNMG150408 designation ensures straightforward selection for holders designed to accept this ISO form. The insert’s 0° clearance angle and 4.76 mm thickness offer a robust seating and consistent clamping interface, while the cylindrical hole aids precise locating on conventional screw‑clamp or wedge systems. Clear labelling and ISO conformity simplify ordering and spare‑part logistics, enabling maintenance teams to standardise inserts across similar operations and reduce inventory complexity. Lower cost per part through stable chip control and edge life The integrated double‑sided chipbreaker supports reliable chip formation across a range of feeds and depths, which directly contributes to consistent surface finish and reduced rework. The 0.8 mm corner radius gives a compromise between edge strength and profile detail, reducing the risk of chipping on interrupted cuts and extending effective tool life. Together, the substrate and coating combination helps maintain cutting‑edge integrity, which translates into fewer tool interventions and a lower overall cost per machined component — a measurable efficiency gain on serial production. Practical guidance for selecting the chipbreaker and grade When choosing a chipbreaker and grade, match the T9225 capability to the workpiece material and machining stability: prefer this robust universal grade for steels with variable hardness or when slight interruptions are likely. For fine finishing at very low cutting depths, consider a smaller corner radius or a finishing grade; for roughing in unstable set‑ups, the present combination offers superior edge security. If compatibility or clamping questions remain, check the system build — insert, matching outer holder or shank, backing plate/clamping set and spare screws — to ensure a safe and repeatable assembly. Contact Metav Werkzeuge for tailored recommendations on Tungaloy turning inserts and request ordering details for DNMG150408 T9225 via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780733 SKU: 6780733-Tungaloy Manufacturer SKU: TUN6780733 Model series: ISO indexable turning inserts Facts Angle: 55° Corner radius: 0.8 mm Insert thickness: 4.76 mm Insert size: 15 Clearance angle: 0° Form: rhombic Special features Material: carbide Coating/grade: T9225 (CVD) Chipbreaker: double‑sided Hole: with cylindrical hole Application: turning Compatible system: ISO‑form insert, matching holder and clamping set FAQ What materials is this insert suited for? The DNMG150408 T9225 insert from Tungaloy is aimed primarily at steel machining, offering strong performance in medium‑to‑heavy turning operations and handling slightly interrupted cuts. How does the T9225 grade affect tool life? Tungaloy’s T9225 is a robust CVD‑coated carbide grade that balances wear resistance and toughness; this combination prolongs effective edge life under varying cutting conditions and helps maintain consistent process times. Is this insert reversible or single‑use? The design is double‑sided, allowing the insert to be indexed to a fresh cutting edge once a side is worn, which optimises material utilisation and reduces tool change frequency. Which holder features are required for correct fitment? Correct fitment for this ISO insert depends on matching the rhombic form, 0° clearance, size and thickness to a compatible holder or turning shank; the cylindrical hole assists accurate locating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated carbide grade and an adaptable 55° rhombic geometry to maintain stable cuts under varying conditions; the ISO compatibility ensures straightforward integration into existing turning tool systems. Order directly via Metav Werkzeuge or consult the team for matching holders and clamping sets. DNMG 150408 T9225 indexable turning insert — 55° rhombic, 0.8 mm radius (Tungaloy) DNMG 150408 T9225 is an ISO-standard indexable insert designed for external and internal turning, offering a tough universal grade for medium to heavy steel machining. CVD-coated carbide for high wear resistance Rhombic 55° geometry for versatile turning 0.8 mm corner radius for durable edges Double-sided chipbreaker with centre hole Reliable performance for medium to heavy steel turning The CVD-coated carbide composition delivers increased wear resistance and consistent edge life in interrupted and variable cutting conditions. The insert’s universal grade T9225 is tailored for turning operations where toughness matters — it absorbs shocks from undercut or slightly interrupted cuts while still maintaining dimensional accuracy. For production environments that require dependable repeatability, this indexable insert reduces tool change frequency and supports predictable process planning. Geometry and edge design that support versatile machining With a 55° rhombic geometry and a 0.8 mm corner radius, the insert balances versatility and strength: the acute rhombic shape allows entry to diverse profiles while the modest radius maintains a robust cutting edge for heavier engagement. The double-sided chipbreaker aids chip control across a range of feeds, and the centre (cylindrical) hole enables secure clamping in standard ISO-compatible holders. These features together support efficient material removal and stable surface finish in typical turning cycles. System compatibility and practical integration The insert conforms to ISO dimensions, so compatibility with a matching external holder, clamping set and replacement screws is determined by form, clearance angle, tolerance class, fixation type, size and thickness. The specified 0° clearance angle and 4.76 mm plate thickness suit many common external turning holders; confirmation of holder fit prevents assembly issues and optimises clamping stability. When selecting an insert for a tooling system, choose the chipbreaker and grade that match material, operation and machine rigidity for best results. For fast procurement or to discuss holder compatibility and batch supply of Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — assistance is available for technical matching and order processing. Technical data Article number: 6781254 Manufacturer SKU: TUN6781254 Model series: ISO indexable turning inserts Material: Carbide Coating: CVD-coated Manufacturer: Tungaloy Facts Insert designation: DNMG150408 Grade: T9225 Corner radius: 0.8 mm Geometry angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Hole: with centre hole (cylindrical) Special features Double-sided chipbreaker Rhombic plate form Suitable for external and internal turning Universal grade for medium to heavy steel machining ISO-standard dimensions for holder compatibility FAQ What materials is this insert intended for? The Tungaloy DNMG150408 T9225 insert is a universal grade primarily intended for medium to heavy steel machining and performs well under varying engagement conditions. How does the T9225 grade behave with interrupted cuts? The T9225 CVD-coated carbide grade is formulated to offer increased toughness, making the insert tolerant of slightly interrupted cuts and changes in cutting conditions without rapid edge failure. Which holders fit this ISO insert? Compatibility depends on the holder’s form, clearance, tolerance class, fixation and thickness; the DNMG150408 follows ISO-standard dimensions, so it fits holders designed for DNMG 150408 inserts when those parameters match. Is chip control effective across feeds? Yes; the double-sided chipbreaker provides reliable chip control across a practical range of feed rates, supporting steady surface quality and safe chip evacuation. Can this insert be used for internal turning? The geometry and hole position allow use in appropriate internal turning holders; ensure the selected holder accepts the DNMG150408 form and size before mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com