DNMG 150408 T9225 Wendeplatten - Tungaloy
Taking advantage of a robust CVD‑coated cemented carbide grade and an economical, double‑sided design, this insert delivers consistent performance for medium to heavy steel turning; order the DNMG150408 T9225 via Metav Werkzeuge or consult the specialists for application support. DNMG150408 T9225 DNMG — ISO turning insert (CVD‑coated carbide, 0.8 mm radius) by Tungaloy The DNMG150408 T9225 is an ISO‑indexable turning insert designed for external and internal turning, engineered to provide reliable chip control and toughness for interrupted cuts in medium to heavy steel machining. CVD‑coated cemented carbide grade T9225 Robust for medium to heavy steel machining Double‑sided insert with cylindrical hole 0.8 mm corner radius for versatile profiling Consistent productivity through a proven grade and coating The combination of a CVD‑coated surface on a cemented carbide substrate ensures a predictable balance between wear resistance and toughness. This grade is formulated as a robust universal grade, intended for medium to heavy steel applications where engagement conditions vary or cuts are intermittently broken. The beneficial outcome is extended tool life and fewer unexpected insert changes, which supports stable production runs and predictable machining costs. Geometry engineered for repeatable part quality A 0.8 mm corner radius and the classic 55° lead angle of the rhombic DNMG form promote smooth entry and stable cutting forces, resulting in improved surface finish and dimensional stability. The double‑sided design doubles the available cutting edges, lowering cost per edge and simplifying inventory. The cylindrical hole and standard ISO form ensure secure clamping when the correct holder, shim and fastening are used, minimising vibration and maintaining repeatable results across batches. Grade characteristics that cope with interrupted and variable cuts The T9225 composition combines a wear‑resistant coating with a substrate tuned for impact resistance. This makes it particularly suitable for applications with slight interruptions or variable engagement depths, where pure hard grades would risk chipping. The insert therefore supports efficient metal removal while reducing the likelihood of edge fracture, helping to keep cycle times stable and finishing operations predictable. Practical compatibility and system considerations for rapid setup Compatibility with toolholders depends on the insert form, clearance angle, tolerance class, fastening style, size and thickness; attention to these factors ensures correct seating and optimal performance. The complete system typically comprises the ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. For workshops aiming to streamline tooling, this insert integrates readily into standard ISO systems and supports straightforward stocking and re‑indexing practices. For application advice and fast supply of Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability. Technical data Article number: 6780891 SKU: 6780891-Tungaloy Manufacturer SKU: TUN6780891 Model series: ISO‑Drehwendeschneidplatten ISO designation: DNMG150408 Key figures Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Lead angle: 55° Clearance angle: 0° Materials & features Material: CVD‑coated cemented carbide (T9225) Double‑sided chipbreaker Rhombic plate form Cylindrical hole for secure clamping Application: Turning (external and internal) Suitable for medium to heavy steel machining and interrupted cuts FAQ What machining tasks is this insert best suited for? The DNMG150408 T9225 insert is designed for turning operations, especially medium to heavy steel machining and interrupted cuts where the T9225 grade offers a balance of wear resistance and toughness. Is the insert indexable on both sides? Yes, the DNMG150408 T9225 is double‑sided, providing multiple usable edges to reduce tooling cost per edge and simplify inventory management. Which holder features must be checked for correct compatibility? Compatibility requires matching the insert form, clearance angle, tolerance class, fastening type, overall size and thickness to the holder and clamping components used with the DNMG150408 T9225. Can this grade handle high cutting speeds? The T9225 grade is optimised for robust, variable cutting conditions rather than extreme high‑speed finishing; it performs reliably in medium to heavy steel turning with occasional interruptions. How does the 0.8 mm corner radius affect part quality? A 0.8 mm radius provides a balance between edge strength and profile definition, improving surface finish and dimensional stability while resisting edge chipping during variable engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Robust CVD-coated carbide T9225 delivers reliable edge life and resilience under interrupted cuts; rhombic ISO geometry with a 0.8 mm corner radius provides consistent surface finish and repeatable indexing. Order the DNMG150408 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408 T9225 indexable turning insert for medium to heavy steel turning by Tungaloy DNMG150408 T9225 Tungaloy-Wendeplatte is an ISO-format indexable insert designed for external and internal turning in steel, offering a robust universal grade for variable engagement conditions. CVD-coated carbide for durability Rhombic geometry with 0.8 mm radius Double-sided chipbreaker for versatile cutting Stable performance for medium to heavy steel turning The insert's CVD-coated carbide substrate in grade T9225 is formulated to combine wear resistance with increased toughness, so it performs reliably when conditions fluctuate or cuts are slightly interrupted. This balance reduces the frequency of edge changes and helps maintain machining tolerances over longer runs. The result is improved process stability and predictable tool life in ordinary and demanding turning tasks. Geometry and indexing that support consistent surface quality With a rhombic plate shape and a 0.8 mm corner radius, the design promotes steady chip flow and a controlled cutting edge engagement. The ISO geometry and 55° wedge angle enable uniform contact with the workpiece, which translates into repeatable surface finishes and easier toolpath programming. Compatibility with standard holders is governed by form, relief angle, tolerance class, fastening, size and thickness, ensuring straightforward integration into existing tool systems. Productivity benefits from double-sided chip control The double-sided chipbreaker enables two usable cutting edges per side, extending the effective life of each insert while providing flexible cutting modes for medium-to-heavy operations. The configuration supports efficient swarf control and reduces the risk of chip-related interruptions. In practical terms, this means fewer tool changes and improved uptime on the lathe when machining a wide range of steels. Practical handling and secure clamping for everyday workshop use The plate is supplied with a cylindrical hole for positive location and secure clamping, simplifying indexation and replacement. A plate thickness of 4.76 mm and a standard ISO size aid mechanical stability under higher cutting forces, while the single relief angle of 0° helps maintain a robust cutting edge. These attributes combine to make the insert a dependable option for workshops seeking a pragmatic balance of durability and performance. For application advice or to secure compatible DNMG150408 Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, practice-oriented consultation and supply Technical data Article number: 6796073 SKU: 6796073-Tungaloy Manufacturer article number: TUN6796073 Model series: ISO-Drehwendeschneidplatten Product designation: DNMG150408 Facts Material: carbide Coating: CVD Grade: T9225 Corner radius: 0.8 mm Plate thickness: 4.76 mm Special features Shape: rhombic Hole: with hole Hole style: cylindrical hole Relief angle: 0° Wedge angle: 55° Chipbreaker: double-sided Application: Turning FAQ What materials is this insert suitable for? The DNMG150408 in grade T9225 is intended primarily for steel machining and is a robust universal grade for medium to heavy steel turning. How many cutting edges are usable per insert? The rhombic DNMG150408 insert features a double-sided chipbreaker, providing multiple indexable edges for extended service life. Does the insert require a specific holder type? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the DNMG150408 conforms to ISO standards for straightforward holder matching. What is the corner radius and why does it matter? The insert has a 0.8 mm corner radius, which helps balance edge strength and surface finish, making it suitable for a wide range of finishing and profiling tasks. Is the coating suitable for interrupted cuts? Yes. The CVD coating on the T9225 grade enhances toughness and wear resistance, improving performance under interrupted or variable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust cutting performance, consistent chip control and ISO compatibility for reliable machining of steel. Order the insert directly via Metav Werkzeuge or consult their technical team for application-specific recommendations. DNMG150408 T9225 — ISO turning indexable insert by Tungaloy (CVD-coated carbide, rhombic 55°) The DNMG150408 T9225 is an ISO-standard rhombic indexable insert designed for external and internal turning, offering a double-sided chipbreaker and a cylindrical hole for secure clamping. ISO-standard rhombic insert DNMG form CVD-coated carbide grade T9225 Double-sided chipbreaker for efficiency 0.8 mm corner radius for robust edge Consistent cutting performance for medium‑to‑heavy turning The DNMG150408 T9225 insert combines a CVD-coated carbide substrate with a robust universal grade to deliver consistent performance in medium‑to‑heavy steel machining. The CVD coating increases wear resistance and maintains edge integrity under varying engagement conditions, while the substrate toughness reduces the risk of chipping during intermittent cuts. This balance of hardness and toughness supports longer tool life and stable surface finish, which in turn lowers downtime and replacement frequency. Clear guidance on compatibility and installation As an ISO-standard insert with a rhombic 55° form and a cylindrical hole, compatibility with the toolholder is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness. The plate features a 0° relief angle and a double-sided chipbreaker, enabling two indexable edges per insert and straightforward indexing. Secure clamping is achieved via the cylindrical hole; selection of the correct clamp and backing pad ensures repeatable seating and correct cutting geometry, reducing assembly errors and improving repeatability on production runs. Productivity, application advice and measurable benefits With a 0.8 mm corner radius, the geometry offers a resilient cutting edge that copes well with interrupted cuts and variable engagement, while still delivering acceptable surface quality for many turning operations. The double-sided chipbreaker supports predictable chip control, which is especially beneficial when machining long or unstable workpieces. For shops focusing on cost-efficiency, the combination of two usable edges per insert and the T9225 grade’s adaptability to changing cutting conditions translates into fewer insert changes and improved process reliability. For special materials or highly specific feeds and speeds, consultation with Metav Werkzeuge’s technical advisers is recommended to optimise cutting data and holder selection. For technical assessment, batch availability or tailored recommendations regarding the Tungaloy DNMG150408 T9225 insert, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a consultant. Technical data Article number: 6781358 Manufacturer SKU: TUN6781358 SKU: 6781358-Tungaloy Manufacturer article number: 6781358 Facts Thickness: 4.76 mm Size: 15 mm Corner radius: 0.8 mm Included angle: 55° Relief angle: 0° Special features CVD-coated carbide (T9225) Rhombic plate (DNMG) Cylindrical hole for clamping Double-sided chipbreaker ISO-standard turning indexable insert Suitable for external and internal turning Model series: ISO turning indexable inserts Material: carbide FAQ Which materials is this insert primarily intended for? The DNMG150408 T9225 insert is primarily intended for steel machining, offering robust performance in medium‑to‑heavy turning applications. How many cutting edges are available per insert and what is the chipbreaker type? The insert features a double‑sided chipbreaker, providing two usable cutting edges per plate and consistent chip control for varied machining conditions. What determines compatibility with a specific toolholder? Compatibility is defined by insert form, relief angle, tolerance class, fastening method, size and thickness; the DNMG150408 form, 0° relief angle and cylindrical hole require a matching DNMG clamping arrangement and backing plate. What advantages does the CVD coating bring for this grade? The CVD-coated carbide composition of the T9225 grade improves wear resistance and edge stability, supporting longer intervals between indexing and more consistent surface quality under changing engagement. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength and stability, making the insert well suited to interrupted cuts and operations where robustness is preferred over the finest possible surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD‑coated carbide grade and ISO‑standard geometry for reliable medium‑to‑heavy turning under varying cutting conditions; order directly via Metav Werkzeuge or consult the team for tailored recommendations. DNMG150408 T9225 Turning Insert — Tungaloy (CVD‑coated carbide, 55° rhombic) A DNMG150408 T9225 indexable turning insert designed for medium to heavy steel turning, offering ISO‑compliant rhombic geometry and a robust universal grade for interrupted or variable cuts. CVD‑coated carbide for robust performance Universal T9225 grade for medium–heavy steel Rhombic DNMG geometry, 55° approach angle 0.8 mm corner radius with cylindrical hole Durable cutting performance for mixed steel applications The combination of CVD‑coated carbide and the T9225 grade delivers a balance of hardness and toughness suited to medium‑to‑heavy steel turning. The coating enhances wear resistance while the substrate provides the necessary toughness for mildly interrupted cuts. This results in more consistent tool life and stable cutting forces, which translates into fewer index changes and improved process reliability. The design reduces risk of edge chipping under variable engagement, supporting predictable cycle times and a steady surface finish. Secure fit and geometry that supports productivity Rhombic DNMG geometry with a 55° approach angle provides a versatile cutting orientation for external and internal turning. The insert’s 0° (negative) relief contributes to a stronger cutting edge and increased depth‑of‑cut capability when paired with a suitably rigid holder. Compatibility with toolholders is determined by form, clearance angle, tolerance class, attachment method, size and thickness; the ISO‑standard designation ensures straightforward selection of matched holders, shims and clamping sets. The cylindrical hole and standard thickness make mechanical seating reliable and repeatable, reducing set‑up time and improving concentricity. Operational benefits, handling and economy A double‑sided chipbreaker extends the usable life per insert by enabling two cutting edges per index, cutting inventory costs and downtime. The insert’s ISO standard format supports fast replacement and simple stock management across production lines. When integrated into a complete system — insert, compatible external holder or boring bar, shim/clamp set and replacement screws — handling is simplified and tool assembly becomes predictable. The net effect is improved throughput and a lower cost per component in batch and continuous manufacturing. For machining tasks requiring a reliable universal grade, contact Metav Werkzeuge for availability and personalised application advice on Tungaloy turning solutions at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780843 Manufacturer SKU: TUN6780843 SKU: 6780843-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150408 Material: Carbide Facts Corner radius: 0.8 mm Approach angle: 55° Size: 15 mm Thickness: 4.76 mm Relief angle: 0° (negative) Features CVD‑coated carbide substrate Universal grade T9225 for medium–heavy steel Rhombic plate form (DNMG) Double‑sided chipbreaker Cylindrical hole for secure clamping Application: Turning ISO‑standard indexable insert FAQ Which materials is this insert best suited for? The Tungaloy DNMG150408 T9225 insert is optimised for medium‑to‑heavy steel machining, offering robustness for slightly interrupted cuts and varying engagement conditions. What does the 55° rhombic geometry mean for cutting? A 55° approach provides a versatile cutting angle that balances cutting force direction and surface finish; the rhombic geometry is widely compatible with ISO holders and supports both external and internal turning. Is the insert reversible and does it include chip control features? Yes, the insert is double‑sided with a chipbreaker on each usable face, allowing two cutting edges per index and improved chip control during turning operations. How is holder compatibility determined? Compatibility depends on plate form, relief angle, tolerance class, attachment method, size and thickness; using ISO‑standard holders and the correct shim/clamp set ensures secure seating and repeatable results. What components form a complete cutting system for this insert? A full system typically comprises the indexable insert, a matching external holder or boring bar, a shim/clamp set and replacement screws to guarantee clamping integrity and ease of maintenance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Benefit from the CVD-coated cemented carbide T9225 and the robust 55° rhombic geometry for reliable medium-to-heavy steel turning; combine durability, consistent surface finish and easy indexing to keep production running smoothly — order directly via Metav Werkzeuge or consult our specialists for application support. DNMG150408 T9225 turning insert — ISO turning indexable insert by Tungaloy DNMG150408 T9225 Tungaloy turning insert for ISO-format external and internal turning; robust universal grade suited to medium and heavy steel machining with intermittent cuts CVD-coated cemented carbide T9225 Rhombic 55° geometry with 0° clearance Double-sided chipbreaker for consistent chips Cylindrical hole for secure clamping High-performance cutting for demanding steel turning The DNMG150408 insert combines a CVD-coated surface with a cemented carbide substrate to deliver wear resistance and toughness where variable cutting conditions occur. The T9225 grade is formulated as a robust universal sort for medium to heavy steel machining; it tolerates slight interruptions and changing engagement depths while maintaining cutting-edge stability. This results in fewer insert changes, more predictable tool life and improved component surface quality, supporting higher throughput and lower process cost per part. Clear compatibility and straightforward toolholder selection Designed to the ISO turning insert family, the plate’s form, clearance angle, tolerance class, fastening method, size and thickness determine holder compatibility. The rhombic 55° shape with 0° clearance and a cylindrical hole ensures positive seating in standard DNMG-compatible holders and bores, reducing assembly time and minimising runout. For operations requiring stable chip control, the double-sided chipbreaker extends flexibility: the same insert can be indexed for renewed cutting edges, simplifying inventory and shortening tool-change intervals. Robust grade and application advantages for production environments The combination of a tough substrate and CVD coating yields a balance between wear resistance and fracture toughness, particularly useful when facing slightly interrupted cuts or mixed batches of steel grades. The double-sided design offers economical indexing; when one edge is spent, rotation delivers a fresh cutting edge immediately. The plate thickness of 4.76 mm and a cutting radius of 0.8 mm provide rigidity and reliable edge strength, which contributes to a consistent surface finish and predictable dimensional control in serial production. Contact Metav Werkzeuge today to discuss the DNMG150408 T9225 for specific steel applications or to request cutting data tailored to a particular holder and machine setup; Metav Werkzeuge provides expert advice and fast delivery options Technical data Article number: 6796033 SKU: 6796033-Tungaloy Manufacturer SKU: TUN6796033 ISO designation: DNMG150408 Model series: ISO turning indexable inserts Name: DNMG150408 T9225 Tungaloy insert Dimensions & key figures Corner radius: 0.8 mm Insert angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Inscribed circle / size: 15 mm Materials & special features Substrate material: cemented carbide Coating / grade: T9225 (CVD-coated) Geometry: rhombic 55° (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning (external and internal) Compatibility: ISO-format indexable insert FAQ What makes the T9225 grade suitable for medium and heavy steel turning? The T9225 CVD-coated cemented carbide provides a compromise of wear resistance and toughness; the grade is formulated to resist abrasion while tolerating slightly interrupted cuts, which makes the DNMG150408 T9225 well suited to medium-to-heavy steel turning. Can this insert be used in standard DNMG holders? Yes — the DNMG150408 conforms to ISO dimensions and the rhombic 55° form, 0° clearance and cylindrical hole ensure compatibility with standard DNMG-style external holders and boring bars when the holder accepts this ISO size. How does the double-sided chipbreaker benefit production? A double-sided chipbreaker offers consistent chip formation on both cutting edges, allowing immediate indexing to a fresh edge when one side is worn; this reduces downtime and inventory variety, improving process reliability. What cutting edge radius and plate thickness should be expected for profile control? This insert features a 0.8 mm corner radius and a plate thickness of 4.76 mm, which together provide edge strength for robust turning operations and support dimensional stability on finished components. Is the DNMG150408 suitable for interrupted cuts? Yes — the robust T9225 grade and the cemented carbide substrate are specifically chosen to tolerate variable engagement and slight interruptions while maintaining edge integrity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9225 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade T9225 and a 55° rhombic geometry to ensure reliable medium-to-heavy steel turning and reduced downtime; order original inserts via Metav Werkzeuge or consult the technical team for application support. DNMG 150408 T9225 indexable turning insert — CVD-coated carbide, 55° rhombic, Tungaloy The DNMG150408 T9225 is an ISO-standard rhombic indexable insert designed for external and internal turning, offering a robust universal grade for interrupted or variable engagement steel machining. CVD-coated carbide grade T9225 55° rhombic geometry for stable cuts 0.8 mm corner radius for robust edges Double-sided chipbreaker, cylindrical hole Increase throughput with a tough universal grade The CVD-coated carbide grade T9225 delivers a balance of toughness and wear resistance that suits medium to heavy steel machining where variable engagement or light interruptions occur. The chemical vapour deposition layer reduces flank wear and extends in-process life, which translates into fewer tool changes and higher cumulative spindle time. As a result, cycle times are stabilised and machine availability improves, supporting a leaner production flow without compromising component integrity. Achieve consistent dimensions and surface quality The 55° rhombic geometry combined with a 0.8 mm corner radius and 0° clearance angle promotes steady cutting forces and predictable chip formation. The double-sided chipbreaker and cylindrical hole ensure both sides can be indexed, enabling economical use of the insert and maintaining repeatable surface finish. These geometric features contribute to accurate dimension control, reduced vibration in the cut and improved part-to-part consistency — essential for serial production and quality assurance. Seamless system compatibility and straightforward handling As an ISO-standard indexable insert, compatibility with holders depends on form, relief angle, tolerance class, clamping method, size and thickness; the system typically comprises the insert, a matching external holder or boring bar, a backing/clamping set and replacement screws. The plate thickness of 4.76 mm and standardised size make integration into established turning systems straightforward, while the robust grade supports a range of cutting conditions. Clear labelling and the manufacturer SKU help with inventory and reordering to keep workshops productive. Contact Metav Werkzeuge to discuss application fit or to request supply of original Tungaloy inserts; consultants are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6780850 SKU: 6780850-Tungaloy Manufacturer SKU: TUN6780850 Model series: ISO-Drehwendeschneidplatten Material: carbide Grade: T9225 Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Geometry angle: 55° Clearance angle: 0° Hole: with hole (cylindrical) Plate form: rhombic Special features CVD-coated carbide Robust universal grade for medium to heavy steel Double-sided chipbreaker ISO-standard indexable insert Suitable for external and internal turning Compatibility determined by form, relief, tolerance, fixing, size and thickness FAQ What applications is this insert designed for? The DNMG150408 T9225 indexable turning insert is intended for external and internal turning, especially medium to heavy steel machining with intermittent engagement. How does the T9225 grade benefit machining performance? The T9225 CVD-coated carbide offers increased toughness for variable cutting conditions, reducing the frequency of tool changes and improving process stability when using the DNMG150408 insert. Is the insert reversible or single-use per side? The insert features a double-sided chipbreaker with a cylindrical hole, allowing indexing of both sides; the exact number of usable edges depends on the geometry and the holder used. Which holders work with this ISO plate? Holders compatible with ISO rhombic plates matching form, tolerance class, clearance angle, size and thickness are suitable; confirmation against holder specifications is recommended before mounting the DNMG150408 insert. What should be checked before fitting the insert? Verify form fit, relief/freedom angle, tolerance class, clamping method, plate size and thickness to ensure secure seating and correct cutting geometry for the Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9235 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade designed for demanding steel turning, combining stable chip control with resilience in interrupted cuts; the insert’s rhombic 55° geometry and 0.8 mm corner radius deliver versatile external and internal turning performance. Order through Metav Werkzeuge or request technical guidance for optimal holder compatibility. DNMG150408 T9235 indexable insert for turning — Tungaloy A DNMG150408 T9235 indexable insert engineered for external and internal turning, offering a CVD-coated carbide grade optimised for tough steels and unstable cutting conditions. CVD-coated carbide for tough steel Rhombic 55° geometry for versatile turning Double-sided chipbreaker for interrupted cuts Improved process stability and material suitability The insert is manufactured from CVD-coated carbide, a combination that improves wear resistance while maintaining toughness under variable loads. This composition means longer tool life during low cutting speeds and when machining steels that produce heavy or stringy chips. The T9235 grade is formulated for applications with interrupted cuts or limited rigidity, which supports more consistent cycle times and reduced scrap rates. Clear, measurable advantages include improved repeatability and reduced tooling changes, contributing directly to higher process efficiency. Precise geometry for versatile turning tasks The rhombic 55° form paired with a 0.8 mm corner radius provides a balanced compromise between strength and profile fidelity, enabling both roughing and light finishing passes. The double-sided chipbreaker design enhances chip control across a range of feeds, reducing risk of chip entanglement and helping to protect the cutting edge during begins-and-stops of interrupted cuts. Compatibility with ISO-standard holders is determined by form, clearance angle, tolerance class, fixation method, size and thickness; selecting the appropriate holder and clamping set ensures optimal cutting conditions. Selection guidance and operational benefits ISO-standardisation simplifies inventory and replacement planning while the insert’s form and 0° clearance angle permit straightforward integration into established tool systems. The presence of a cylindrical hole supports secure fastening and repeatable seating, minimising setup variance. For practical use, pair the insert with a suitable external holder or boring bar and check tolerance class and seating geometry before commissioning. If uncertainty persists regarding holder compatibility or ideal cutting parameters for specific steels, Metav Werkzeuge offers technical consultation to match the insert to the machining environment. For expert selection and availability of this Tungaloy indexable insert contact Metav Werkzeuge; technical advice and order support are available by email or phone through Metav Werkzeuge. Technical data Article number: 6786039 Manufacturer SKU: TUN6786039 Label: DNMG150408 T9235 Tungaloy-Wendeplatte Shape: rhombic Hole: with cylindrical hole Grade: T9235 Facts Insert designation: DNMG150408 Corner radius: 0.8 mm Insert size: 15 mm Thickness: 4.76 mm Geometry angle: 55° Clearance angle: 0° Special features CVD-coated carbide Double-sided chipbreaker ISO-standard indexable insert Intended application: turning (external and internal) Suitable for unstable cutting conditions and interrupted cuts FAQ What materials is this insert suitable for? The DNMG150408 T9235 indexable insert is designed primarily for steel machining; the T9235 CVD-coated carbide grade performs well under interrupted cuts and lower cutting speeds typical for tougher steels. How does the chipbreaker affect machining of interrupted cuts? The double-sided chipbreaker on this insert improves chip control and reduces the likelihood of chip-related interference during interrupted cutting, enhancing process stability for conventional turning operations. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fixation method, size and thickness; verify these parameters against the ISO-standard DNMG150408 seating before assembly. Is the insert reversible or indexable? The insert is double-sided and indexable; once one edge is worn, the insert can be indexed to present a fresh cutting edge, extending usable life. What is the significance of the 55° geometry? A 55° rhombic geometry provides a flexible balance between edge strength and profile accuracy, making the insert suitable for both roughing and finishing passes in varied turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9235 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated cemented carbide grade that tolerates interrupted cuts and a robust ISO rhombic geometry for secure clamping; the insert supports steady productivity and reduced downtime. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150408 T9235 — ISO turning insert for unstable and interrupted turning, Tungaloy The DNMG150408 T9235 is an ISO‑standard rhombic turning insert intended for external and internal turning where interrupted cuts or reduced machine stability require a tougher grade and reliable chip control. CVD-coated carbide grade T9235 ISO-standard rhombic DNMG geometry 0.8 mm corner radius for robust cutting Double-sided chipbreaker, cylindrical hole Increased process reliability for interrupted and unstable cuts The CVD-coated cemented carbide substrate of this insert delivers pronounced toughness, which is beneficial when machining under unstable conditions or performing interrupted cuts. The T9235 grade is formulated for lower cutting speeds where edge strength and resistance to chipping are priorities. By choosing a tougher grade rather than a harder, more brittle alternative, the risk of premature edge failure is minimised and tool life becomes more predictable. This translates into fewer unscheduled insert changes and a steadier production flow. Geometry and clamping designed for predictable handling and chip control The ISO DNMG form with a rhombic outline and a 55° cutting angle provides a widely compatible platform for many external holders. The insert is double-sided, offering two usable edges per side, and is supplied with a cylindrical hole, ensuring positive location in standard clamping systems. The 0.8 mm corner radius balances edge strength with obtainable surface finish. Compatibility with a specific holder is determined by form, relief angle, tolerance class, fastening, size and thickness; these parameters should be checked against the toolholder documentation before assembly to guarantee correct seating and repeatable results. Rapid changeover and economical operation for production environments A double-sided chipbreaker lowers set-up times because each indexation restores a prepared cutting edge without time-consuming regrinding. The insert forms part of a simple system consisting of the insert, a matching outer holder or boring bar, a backing clamp or mounting set, and replacement screws; this standardised approach reduces inventory complexity and shortens intervention times. In practice, fewer interventions and the option to index both sides lead to lower per-cutting-edge costs and improved overall equipment effectiveness in series production. Material recommendations and practical application notes This insert is optimised for machining steel and similar materials where interrupted cuts or lower speeds are anticipated. The T9235 grade offers wide applicability across unalloyed and alloyed steels when stability is limited; selecting a chipbreaker and grade to suit the workpiece material and cutting conditions remains essential. For finishing cuts on more stable set-ups, a finer corner radius or a different grade may be preferable. Always verify machine power and fixture rigidity before increasing cutting data, and follow established wear-monitoring practices to maintain consistent component quality. Contact Metav Werkzeuge for tailored application advice and to procure the DNMG150408 T9235 insert from Tungaloy; consultants are available by email or phone to discuss holder compatibility and cutting data. Technical data Article number: 6785983 Manufacturer SKU: TUN6785983 Metav SKU: 6785983-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Cemented carbide Facts Corner radius: 0.8 mm Thickness: 4.76 mm Size: 15 mm Relief angle: 0° Insert angle: 55° Hole: cylindrical Coating: CVD Versions / Special features Double-sided chipbreaker Rhombic plate form With cylindrical hole Suitable for external and internal turning Grade T9235 — tough grade for steel and interrupted cuts ISO-standard turning insert FAQ What materials is this insert best suited for? This insert is primarily intended for machining steel; the T9235 grade is selected for toughness in interrupted- or unstable-cut conditions. How many usable cutting edges does the insert offer? The DNMG150408 is double-sided, providing multiple indexable edges per insert to extend service life before replacement. Is the insert compatible with standard DNMG holders? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the DNMG150408 is ISO‑standard and generally fits standard DNMG holders when specifications match. What does the CVD coating provide? The CVD coating on the cemented carbide enhances wear resistance and edge protection under moderate cutting speeds, while the base grade maintains impact resistance for interrupted cuts. Can this insert be used for finishing passes? The 0.8 mm corner radius and the tougher T9235 grade are optimised for robustness rather than ultra-fine finishing; for final finishing, consider a smaller corner radius or a grade optimised for surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T9235 for reliable performance in interrupted steel turning and the DNMG150408 geometry for consistent clamping and repeatability; order directly via Metav Werkzeuge or request expert application advice. DNMG 150408 T9235 Tungaloy turning insert — CVD‑coated carbide, 55° rhombic The DNMG150408 T9235 Tungaloy insert is an ISO‑standard rhombic turning insert designed for external and internal turning in steel applications. DNMG150408 form, 55° rhombic CVD‑coated carbide T9235 grade Double‑sided chipbreaker for interrupted cuts Cylindrical hole for secure clamping Stable cutting under interrupted and unstable conditions The CVD‑coated T9235 carbide grade is formulated for toughness, providing improved resistance to chipping and wear when machining steels under interrupted cuts or less rigid setups. The rhombic 55° geometry ensures a stable cutting edge with a compact contact area, while the relief angle 0° supports low cutting forces in many turning tasks. This combination translates into fewer indexings and reduced downtime, which benefits throughput and process consistency in production environments. Precision fitting and repeatable clamping for productivity Compatibility with toolholders is determined by geometry, tolerance class, size and thickness; the ISO designation guarantees interchangeability across standard holders. The insert features a cylindrical hole and is compatible with standard clamping systems, enabling consistent seating and torque transfer. The double‑sided chipbreaker contributes to stable chip control on both cutting edges, offering predictable performance and easier tool management for workshops that require quick insert changes and reproducible results. Choose the right grade and chipbreaker for steel turning The insert is intended primarily for turning of steel where a tougher grade at lower cutting speeds is preferred. The T9235 grade is optimised for stable chip formation and extended edge life in harsher conditions; it is particularly suitable when interruptions or variable cut depths are expected. Select the chipbreaker and grade according to workpiece stability and finishing requirements to balance surface quality and tool life efficiently, reducing total machining cost per part. For application guidance on Tungaloy inserts and to check stock availability, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — specialists can advise on holder compatibility and the best chipbreaker for the intended steel machining task. Technical data Article number: 6785907 Manufacturer SKU: TUN6785907 SKU: 6785907-Tungaloy Model series: ISO‑Drehwendeschneidplatten Core specifications Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle / size: 15 mm Lead angle: 55° Relief angle: 0° Materials & features Material: carbide Grade/coating: T9235 (CVD‑coated) Shape: rhombic, DNMG150408 Chipbreaker: double‑sided Hole: cylindrical hole Application: turning (external and internal), suited to interrupted cuts and lower cutting speeds FAQ What is the primary use for this insert? The DNMG150408 T9235 Tungaloy insert is designed for external and internal turning of steels, especially where interrupted cuts or unstable setups demand a tougher grade. How does the T9235 grade perform compared with harder grades? T9235 provides improved toughness and chip control at lower cutting speeds, reducing the risk of edge fracture compared with harder, more wear‑oriented grades. What does the 55° rhombic geometry mean for machining? A 55° rhombic shape offers a compact cutting edge suitable for finishing and semi‑finishing; it allows close‑in cutting and good access to profiles while maintaining rigidity. Is the insert compatible with standard ISO holders? Yes, being an ISO‑standard insert, the DNMG150408 fits holders that match its form, size, thickness and clamping style; the cylindrical hole supports secure seating. What advantages does the double‑sided chipbreaker offer? The double‑sided chipbreaker provides consistent chip control on both cutting edges, extending usable life before indexing and simplifying tool inventory management. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150408 T9235 Wendeplatten - Tungaloy
Benefit from the reliable combination of a CVD-coated carbide grade tailored for steel machining and a double-sided chipbreaker that maintains stability in interrupted cuts; order directly via Metav Werkzeuge or consult our specialists for machining recommendations. DNMG150408 T9235 DNMG 150408 T9235 turning insert by Tungaloy — CVD-coated carbide, 0° negative rake A DNMG150408 T9235 insert for general-purpose external and internal turning, engineered for steel applications and for use in unstable or interrupted cutting conditions. CVD-coated carbide grade T9235 Optimised for steel turning Double-sided chipbreaker for reliability ISO 150408 rhombic shape, 0° negative rake Consistent cutting performance for demanding turning tasks The combination of a CVD-coated surface and a wear-resistant carbide substrate delivers steady performance under variable cutting conditions. The T9235 grade is formulated to provide toughness at lower cutting speeds, which helps to avoid premature edge chipping when facing interrupted cuts or limited rigidity. This results in fewer tool changes and more predictable cycle times, supporting higher throughput in medium-duty turning operations. Material suitability and process advantages Designed primarily for steel machining, the insert’s geometry and coating promote controlled chip formation and heat management. The double-sided chipbreaker balances chip control with adaptability across different feed rates, reducing the risk of built-up edge and improving surface finish on both external turning and internal turning tasks. Where stability is limited, this specification allows safer parameter selection without sacrificing part quality. Easy integration with ISO holders and straightforward handling The insert conforms to the ISO 150408 designation and fits standard ISO-compatible toolholders when matched for form, tolerance and thickness. A rhombic plate profile with a 0° negative rake simplifies seat alignment and clamping, while the central cylindrical hole ensures secure fastening and repeatable positioning. These characteristics ease setup and help maintain consistent tool posture across production batches. Reliability, lifecycle and economic rationale Owing to the robust substrate and the protective CVD coating, the grade offers a good balance between wear resistance and impact tolerance, delivering dependable tool life even with intermittent cuts. This stability supports predictable maintenance intervals and contributes to favourable cost-in-use comparisons, particularly in shops running mixed batches where conditions vary between jobs. Contact Metav Werkzeuge for tailored machining advice, availability of DNMG150408 T9235 inserts from Tungaloy and assistance selecting the optimal grade and chipbreaker for the intended turning application Technical data Article number: 6785880 Manufacturer SKU: TUN6785880 SKU: 6785880-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Coating / Grade: T9235 (CVD-coated) Facts ISO designation: 150408 Plate size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Tool angle: 55° Rake: 0° (negative) Special features Rhombic plate form With cylindrical hole Double-sided chipbreaker Application: turning Typical system: ISO insert with compatible external holder or boring bar FAQ What materials is this insert suitable for? The Tungaloy DNMG150408 T9235 insert is optimised for steel machining; its CVD-coated carbide composition supports stable performance in interrupted or unstable cuts. Can the insert be used for both external and internal turning? Yes, the rhombic shape and secure central hole make the insert suitable for both external turning and internal turning when mounted in the appropriate ISO-compatible holder. How does the T9235 grade behave under interrupted cuts? T9235 is a tough, CVD-coated carbide grade designed to tolerate shock and reduce chipping at lower cutting speeds, offering improved reliability in interrupted cutting conditions. What must be checked to ensure holder compatibility? Compatibility depends on the insert form, free rake angle, tolerance class, fastening method, size and thickness; verify holder specifications against the ISO 150408 designation before assembly. Is the chip control adequate for mixed production batches? The double-sided chipbreaker provides adaptable chip control across a range of feeds and depths, making it suitable for varied production where part geometry and cutting parameters change. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9235 Wendeplatten - Tungaloy
Benefit from the DNMG150408 T9235 insert's CVD-coated carbide and double-sided chipbreaker for improved edge life and stable machining under interrupted cuts; order via Metav Werkzeuge or consult our application advisers for holder compatibility. DNMG150408 T9235 indexable turning insert — 55° rhombic, CVD-coated carbide, Tungaloy A DNMG150408 T9235 indexable insert engineered for general turning, offering a robust grade suited to steel under unstable conditions and interrupted cuts. CVD-coated carbide for improved wear resistance Double-sided chipbreaker for flexible use 55° rhombic geometry for versatile turning 0.8 mm corner radius for durable edge strength Boosted process reliability and predictable tool life The insert's CVD-coated carbide grade T9235 combines a wear-resistant coating with a tough substrate to extend service intervals in demanding turning operations. The CVD layer reduces flank wear at lower cutting speeds, while the substrate tolerates shock from interrupted cuts; this results in a measurable increase in component quality and fewer unplanned tool changes. Compatibility is determined by the holder's form, relief angle, tolerance class, fastening and the insert's size and thickness, so pairing the insert with a correctly specified clamping system secures repeatable performance and surface finish. Simple integration with existing tool systems Engineered as an ISO-standard turning plate, the insert integrates into conventional assemblies comprising an outer holder or boring bar, a shim/clamp set and replacement screws. The 55° rhombic geometry and 0.8 mm corner radius allow a balance between edge strength and versatility for both external and internal turning applications. The insert is double-sided with a cylindrical hole for secure mounting, enabling economical index changes and consistent positioning in ISO-compatible toolholders. Clear labelling of the ISO designation and the nominal dimensions supports quick identification and trouble-free replacement in production environments. Stable cutting under interrupted cuts and unstable conditions The T9235 grade is specifically developed for machining steel where conditions are unstable or cutting is intermittent: the combination of toughness and coating helps absorb shocks while maintaining a stable cutting edge. The double-sided chipbreaker offers reliable chip control across a range of feeds and depths of cut, reducing heat build-up and improving chip evacuation. For operations where process security and surface integrity matter, this insert offers a pragmatic balance between wear resistance and mechanical robustness, enabling consistent cycle times and quality outcomes. For specification checks, holder compatibility or application advice on Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — our technical advisers will assist with selection and integration. Technical data Article number: 6785834 Manufacturer SKU: TUN6785834 SKU: 6785834-Tungaloy Facts Corner radius: 0.8 mm Included angle: 55° Plate thickness: 4.76 mm Plate size: 15 mm Free clearance angle: 0° ISO designation: 150408 Special features Material: cemented carbide Coating: CVD Grade: T9235 Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Typical application: turning Model series: ISO turning indexable inserts System components: insert, outer holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suited for? The DNMG150408 T9235 is formulated for machining steel; the CVD coating and tough substrate make it especially suitable for lower cutting speeds and interrupted cuts in steel components. Can the insert be used on internal and external turning operations? Yes — the 55° rhombic geometry and the 0.8 mm corner radius allow use in both external turning and internal boring when fitted in compatible ISO toolholders. How does the double-sided chipbreaker benefit production? A double-sided chipbreaker provides two usable cutting edges per index, offering economical edge changes and consistent chip control to support stable machining and easier handling of variable chip loads. What determines compatibility with a holder? Compatibility depends on matching the insert form, relief (free) angle, tolerance class, fastening method, nominal size and thickness; verify these parameters against the holder specification before fitting the DNMG150408 T9235. Is the T9235 grade suitable for interrupted cuts? Yes — T9235 was developed for tougher operating conditions, including interrupted cuts and unstable machining, combining toughness with a wear-resistant CVD coating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9235 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade designed for steel, the 55° rhombic geometry and a double-sided chipbreaker that together improve process stability and reduce downtime; order the insert directly via Metav Werkzeuge or consult our specialists for application support. DNMG150408 T9235 ISO turning insert for turning — Tungaloy A DNMG150408 T9235 indexable turning insert designed for external and internal turning, optimised for unstable conditions and interrupted cuts CVD-coated carbide T9235 grade 55° rhombic geometry for versatility Double-sided chipbreaker for stable cuts Cylindrical hole and 0° rake angle Improve process stability with a tough CVD-coated grade The combination of CVD-coated carbide and the T9235 formulation provides a tough cutting edge that is particularly suited to machining steel at moderate speeds and in less stable setups. The CVD layer increases wear resistance and thermal stability, which translates into longer tool life and more consistent surface finish in production environments. Because the insert is an ISO-standard component, replacement and inventory management become straightforward, supporting reliable production planning. Less setup uncertainty thanks to standardised geometry and secure mounting The 55° rhombic shape and cylindrical hole simplify integration with a wide range of ISO-compatible holders. Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness, which are standardised for this series. The standardised geometry reduces setup times and helps maintain repeatable clamping accuracy, minimising rework and non-productive time in the workshop. Designed for interrupted cuts and unstable turning operations With a double-sided chipbreaker, a 0° rake angle and a corner radius 0.8 mm, the insert is optimised for interrupted cuts and operations where stability is limited. The chipbreaker supports effective chip control, reducing the risk of built-up edge and improving machining consistency. The plate thickness of 4.76 mm contributes to rigidity, so the cutting edge better resists vibration during heavier engagement or interrupted passes. Measurable gains for productivity and process reliability Selecting a grade engineered for demanding steel applications leads to fewer insert changes and steadier cycle times, which in turn lowers unit production costs and improves on-time delivery capability. The insert’s ISO designation and standard dimensions make it easy to plan tool inventories and to match the correct chipbreaker and grade to the specific workpiece material and machining strategy, delivering predictable results across batches. Contact Metav Werkzeuge for tailored application advice and to secure original Tungaloy DNMG150408 T9235 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6785835 SKU: 6785835-Tungaloy Manufacturer SKU: TUN6785835 Material: Carbide Series: ISO turning insert series ISO designation: DNMG150408 Grade: T9235 Numbers / Core technical data Insert angle: 55° Corner radius: 0.8 mm Thickness: 4.76 mm Size: 15 mm Rake angle: 0° Hole style: cylindrical hole Special features / Materials CVD-coated carbide grade T9235 Double-sided chipbreaker Rhombic insert form ISO 150408 standardised insert Intended application: turning; suited to steel, interrupted cuts, unstable conditions Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ Is the DNMG150408 T9235 suitable for machining steel? The DNMG150408 T9235 insert is designed specifically for steel applications; its T9235 formulation and CVD coating enhance toughness and wear resistance for such materials. Can this insert be used for internal as well as external turning? Yes, the ISO-standardised DNMG150408 geometry and 55° rhombic form allow use in both external and internal turning applications when paired with the appropriate holder. What cutting conditions is this grade optimised for? The T9235 grade is optimised for lower cutting speeds, unstable setups and interrupted cuts where a tougher edge and good chip control are required. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker supports secure chip formation and evacuation on both indexable faces, improving process stability and reducing the likelihood of built-up edge. How is holder compatibility determined for this insert? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; confirm these parameters against the chosen ISO holder specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9235 Wendeplatten - Tungaloy
The CVD-coated carbide T9235 combined with the rhombic DNMG geometry and 55° cutting angle delivers robust performance for turning operations in Stahl, especially under interrupted or unstable cutting conditions; order the DNMG150408 insert directly via Metav Werkzeuge or contact our consultants for holder compatibility. DNMG 150408 T9235 Tungaloy insert — Turning, CVD-coated carbide, 55° rhombic The DNMG150408 T9235 Tungaloy insert is an ISO-standard, rhombic indexable insert designed for external and internal turning, optimised for machining Stahl where interrupted cuts or reduced cutting speeds demand a tough grade and reliable chip control. CVD-coated carbide grade T9235 Rhombic DNMG geometry, 55° cutting angle 0° clearance angle for stable turning Double-sided, cylindrical hole; 4.76 mm thickness Delivering reliable results in demanding turning operations The combination of a CVD-coated surface and a carbide substrate in grade T9235 is engineered for toughness rather than maximum speed, which makes the insert particularly suitable for interrupted cuts and unstable set-ups. The chemical vapour deposition layer increases wear resistance while preserving edge strength; this reduces the frequency of edge failure in mixed or challenging material batches. For operations where feed fluctuation or sporadic chip engagement occurs, the indexable insert provides a predictable service life, lowering the need for unscheduled tool changes and supporting more consistent production throughput. Geometry and chip control that improve surface quality The rhombic DNMG form with a 55° cutting angle and a 0.8 mm corner radius balances strength and finish. A larger corner radius increases edge robustness, helping to resist chipping during interrupted cuts, while the 55° relief promotes accessibility on external and internal profiles. The double-sided chipbreaker design with a cylindrical hole supports repeatable chip formation and straightforward indexing; by maintaining consistent chip separation and evacuation, vibration is reduced and surface quality is improved in many turning scenarios. Economy through durability and predictable performance Selecting a grade that prioritises toughness, such as T9235, leads to fewer insert replacements in the long run when machining Stahl under lower cutting speeds or unstable conditions. The CVD-coated carbide provides a balanced wear resistance that is cost-effective in applications where coatings designed for maximum speed would otherwise fail prematurely. Reduced downtime for tool changes and fewer rejects contribute to a more economical process without sacrificing the ability to handle occasional interruptions in the cut. Compatibility and practical workshop guidance Compatibility with toolholders is determined by insert form, clearance angle, tolerance class, fixation method, size and thickness. The DNMG designation and the ISO code 150408 indicate a 15 mm inscribed circle and a plate thickness of 4.76 mm, with a 0° clearance specification that must match the chosen holder geometry. Typical tool assembly comprises the insert, a matching external holder or boring bar, a support shim or clamping kit and the appropriate clamping screws. When replacing inserts, ensure that the holder accepts a rhombic DNMG plate with a cylindrical hole and that the tolerance class aligns with the intended cutting parameters for stable clamping and accurate seating. Contact Metav Werkzeuge to specify the correct holder and order the DNMG150408 T9235 insert; our technical team can advise on clamping, chipbreaker selection and compatibility — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6786015 Manufacturer SKU: TUN6786015 SKU: 6786015-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Designation: DNMG150408 Manufacturer: Tungaloy Facts Cutting angle: 55° Clearance angle: 0° Thickness: 4.76 mm Inscribed circle / size: 15 mm Corner radius: 0.8 mm Manufacturer item number: 6786015 Special features Coating: CVD (grade T9235) Double-sided chipbreaker Cylindrical hole for secure clamping Rhombic plate form (DNMG) Suitable for external and internal turning (Drehen) Compatibility determined by form, clearance, tolerance, size and thickness FAQ Is the DNMG150408 T9235 insert suitable for interrupted cuts? The DNMG150408 T9235 Tungaloy insert is designed with a tough T9235 grade and CVD coating, making it well suited to interrupted cuts and unstable engagement conditions when machining Stahl. Which materials are recommended for this insert? This insert is optimised for machining Stahl; the CVD-coated carbide T9235 provides toughness and wear resistance for such applications rather than maximum-speed finishing on non-ferrous materials. Can the insert be indexed to use both sides? Yes, the DNMG150408 is double-sided; each indexing operation provides a fresh cutting edge, and the cylindrical hole assists secure and repeatable clamping (SKU: 6786015-Tungaloy). What dimensions should be checked before fitting the insert? Check the key dimensions: 15 mm inscribed circle, 4.76 mm plate thickness, 0.8 mm corner radius and the 55° geometry to ensure the chosen holder and shim match the DNMG150408 specification. How should the chipbreaker and holder be selected? Select a chipbreaker that fits the machining stability and feed range; the DNMG150408 with its double-sided chipbreaker is versatile, but holder compatibility depends on matching form, clearance angle, tolerance and fixation for reliable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, a robust 0.8 mm corner radius and ISO compatibility for reliable machining in unstable turning conditions; order the insert directly via Metav Werkzeuge or ask the consultants for application support. DNMG150408 T9235 turning indexable insert (55° rhombic, Tungaloy) The DNMG150408 T9235 is an ISO-form turning indexable insert engineered for external and internal turning, offering a tough CVD-coated carbide grade for interrupted cuts and unstable set-ups CVD-coated carbide grade T9235 Rhombic geometry with 55° cutting angle Double-sided chipbreaker for interrupted cuts 0.8 mm corner radius for robust engagement Consistent performance in unstable turning conditions The combination of a CVD-coated surface and the T9235 tough grade provides a reliable balance between wear resistance and fracture toughness, making this insert well suited to steel machining at reduced cutting speeds. The substrate material is carbide, which sustains edge integrity during heavy interruptions and variable chip loads; this results in fewer edge failures and more predictable tool life. For operations where stability is limited, the chosen grade reduces the risk of catastrophic wear, enabling steadier cycle times and more consistent component quality. Clear ISO compatibility and secure clamping Manufactured to ISO dimensions, the insert features a rhombic 55° geometry and a cylindrical hole for positive location in compatible holders. Compatibility with a specific holder is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; the relief angle is 0°, thickness is 4.76 mm and the insert size corresponds to 15 mm. These standardised attributes simplify selection and replacement in ISO systems, allowing straightforward matching with established turning holders and clamping kits. Correct matching reduces setup time and ensures repeatable cutting positions. Design elements that reduce downtime and protect the edge A double-sided chipbreaker on this insert provides reliable chip control for interrupted and varying cuts while offering two usable cutting edges per side where applicable, contributing to economical edge utilisation. The 0.8 mm corner radius delivers a stable engagement at the cutting edge, improving resistance to chipping during entry and exit phases. Together, these features support longer in-process intervals and fewer unscheduled tool changes, which is particularly beneficial for small-batch production and workshop environments with mixed stability. Application guidance and pragmatic selection The insert is optimised for external and internal turning of steel; selection of the exact chipbreaker and the matching grade should be aligned with workpiece material, machining strategy and machine-tool rigidity. In practice, choose lower cutting speeds with this tough grade when encountering interrupted cuts or unstable clamping to exploit the fracture resistance of the substrate. The full machining system includes the ISO insert, an appropriate external holder or boring bar, a backing plate/clamping set and replacement screws — ensuring secure fixation and repeatable results. Technical matching for specific workpieces and recommended cutting data can be provided by Metav Werkzeuge’s consultants for process planning and optimisation. For machining tasks that require dependable performance with Tungaloy’s T9235 grade, contact Metav Werkzeuge for availability and technical matching — Metav Werkzeuge can advise on holder compatibility and cutting data. Technical data Article number: 6785930 Manufacturer SKU: TUN6785930 Model series: ISO-Drehwendeschneidplatten Shape: rhombic Hole style: cylindrical hole Core technical figures Cutting angle: 55° Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 15 mm Relief angle: 0° Special features Coating: CVD coating Grade: T9235 Material: carbide Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal) ISO standardised insert FAQ What materials is this insert recommended for? The DNMG150408 T9235 insert is recommended primarily for machining steel; the T9235 grade is a tough, CVD-coated carbide designed for lower cutting speeds and interrupted cuts in steel. How does the 0.8 mm corner radius affect cutting performance? A 0.8 mm corner radius on the DNMG150408 increases edge strength for robust engagement, reducing the likelihood of chipping during entry and exit and extending in-process tool life. Is the insert compatible with standard ISO toolholders? Yes, the DNMG150408 conforms to ISO dimensions; compatibility depends on holder form, tolerance class, fastening and thickness, and the insert uses a cylindrical hole for location. What advantage does the double-sided chipbreaker provide? The double-sided chipbreaker on this insert improves chip control during interrupted cuts and can extend the usable life per insert by offering additional usable edges, enhancing productivity. Which features help when machining under unstable conditions? The combination of CVD-coated carbide, the tough T9235 grade and the 0.8 mm corner radius makes this insert suited to unstable setups by improving fracture resistance and preserving cutting-edge integrity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9235 and the 0.8 mm nose radius to maintain stable cutting under interrupted or unstable conditions; order the DNMG150408 T9235 insert directly via Metav Werkzeuge or consult our technical advisors if specialised guidance is required. DNMG150408 T9235 ISO turning insert for turning – Tungaloy DNMG150408 T9235 is an ISO-standard rhombic indexable insert designed for external and internal turning of steel under unstable or interrupted cutting conditions CVD-coated carbide grade T9235 Optimised for steel and interrupted cuts Rhombic DNMG 55° geometry 0.8 mm nose radius for versatile turning Stable cutting in interrupted and unstable turning The DNMG150408 T9235 insert pairs a CVD-coated surface with a tough carbide substrate to deliver consistent performance in demanding turning applications. The T9235 grade is formulated for steel machining at lower cutting speeds and in less stable set-ups, helping to reduce edge chipping during interrupted cuts. The combination of coating and substrate improves wear resistance and edge strength, which translates into fewer tool changes and more predictable cycle times. For production environments where stability varies, this insert supports repeatable part quality and controlled tool-consumption rates. Geometry and clamping that simplify tool selection The insert’s rhombic shape with a 55° geometry and a 0.8 mm nose radius offers a balance between profile control and strength, suitable for both finishing and light roughing passes. The 4.76 mm plate thickness and the cylindrical hole enable secure clamping in standard ISO DNMG holders; compatibility depends on holder form, relief angle, tolerance class, fastening and size. The double-sided design with a double-sided chipbreaker provides two usable cutting edges per index, improving economy per insert and easing inventory management across common turning programmes. Production benefits and application guidance Specifically tailored for turning operations, the insert supports external and internal machining where interrupted cuts or marginal fixturing stability occur. The CVD layer provides enhanced thermal and abrasive wear protection, while the carbide core maintains a robust cutting edge under varying loads. This results in higher process reliability, reduced scrap risk and improved overall tool-life economics. For users seeking predictable finish and consistent chip control on steel components, the insert’s combination of geometry and grade offers an efficient solution that integrates seamlessly into ISO-based tooling systems. For application-specific recommendations and to request the DNMG150408 T9235 from Tungaloy, contact Metav Werkzeuge for technical advice or ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6785986 Manufacturer SKU: TUN6785986 SKU: 6785986-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Key dimensions Insert designation: DNMG150408 ISO code: 150408 Size: 15 mm Thickness: 4.76 mm Nose radius: 0.8 mm Relief angle: 0° Included angle: 55° Features & material Material: carbide Coating/grade: T9235 (CVD-coated) Chipbreaker: double-sided Hole: with hole, cylindrical hole Geometry: rhombic Application: turning (external and internal) System: ISO insert compatible with matching holder form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The DNMG150408 T9235 insert is primarily suited to machining steel; the T9235 grade is optimised for steel cutting at lower speeds and in interrupted conditions. Is the insert indexable and how many edges are available? Yes, the insert is double-sided with a double-sided chipbreaker, offering multiple usable cutting edges to improve economy per insert. Which holder geometry is required for correct clamping? Clamping requires a compatible ISO DNMG holder where form, relief angle (0°), tolerance class, fastening, size and thickness match the insert specifications. What are the key dimensional values to consider when programming or setting up? Key values are the 15 mm size, 4.76 mm thickness, 0.8 mm nose radius and the 55° included angle. How does the CVD coating influence performance? The CVD coating on the T9235 grade increases abrasive and thermal wear resistance, stabilising the cutting edge and extending useful tool life during interrupted or unstable cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness, a 0.8 mm corner radius and robust chip control for reliable turning under unstable conditions; order directly via Metav Werkzeuge or contact the consultants for tailored advice. DNMG 150408 T9235 DNMG Turning Insert for Turning — Tungaloy DNMG150408 T9235 is an ISO rhombic turning insert designed for external and internal turning applications, offering a tough CVD-coated carbide grade for interrupted cuts and less stable machining conditions. CVD-coated carbide for durable edge life 0.8 mm corner radius for controlled feed performance Rhombic ISO plate with 55° lead angle Double-sided chipbreaker with cylindrical hole Consistent cutting performance under demanding conditions The combination of a CVD-coated surface and a carbide substrate provides a balanced mix of wear resistance and toughness. The T9235 grade is formulated for steel machining at lower cutting speeds and where conditions are unstable or cuts are interrupted; this means fewer edge failures and longer periods between tool changes. The plate thickness of 4.76 mm and the 0.8 mm corner radius contribute to a robust cutting edge that tolerates the mechanical shocks associated with interrupted machining. In practice, this translates into steadier cycle times and improved process reliability when machining medium to heavy sections of steel. Versatile ISO system compatibility for simple tool management As an ISO-standard insert, the plate is compatible with a wide range of holders provided form, relief angle, tolerance class, fastening, size and thickness match. The system typically comprises an ISO turning insert, a suitable external holder or boring bar, a support/locking set and spare screws, enabling straightforward integration into existing tool inventories. The rhombic geometry and 55° lead angle make the insert suitable for both external profiling and internal turning, while the cylindrical hole simplifies secure clamping. These standardised interfaces reduce tool-change complexity and support leaner stock management in workshops and maintenance departments. Reliable chip control and seating for interrupted and unstable cuts The double-sided chipbreaker on this insert assists controlled chip formation and evacuation, lowering the risk of re-cutting and improving surface finish consistency. The nominal 0° relief angle ensures a secure seating geometry suited to rigid clamping — a design choice that helps to minimise vibration when paired with the correct holder rigidity. Together with the CVD-coated carbide composition, these features promote repeatable performance across interrupted cuts and variable material batches, thereby reducing unexpected downtime and enhancing production predictability. Practical selection and application guidance Select the chipbreaker style and grade according to workpiece stability, feed rate and depth of cut: for unstable setups or interrupted engagement the T9235 grade and the 0.8 mm radius favour edge strength over maximum speed. When switching from a finer-radius insert, expect improved edge robustness but consider slightly adjusted feeds to maintain desired surface finish. For inventory planning, the ISO designation and double-sided nature of the plate optimise cost per edge and simplify rotation and indexing strategies. For application advice, availability and fast supply of Tungaloy turning solutions, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for consultancy and order handling. Technical data Article number: 6785831 Manufacturer SKU: TUN6785831 SKU: 6785831-Tungaloy ISO designation: DNMG150408 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 15 mm Lead angle: 55° Relief/clearance angle: 0° Special features Material: carbide, CVD-coated Grade: T9235 — tough grade for steel, lower speeds Plate shape: rhombic, double-sided Hole: with cylindrical hole Chipbreaker: double-sided for controlled chips System: ISO turning insert compatible with external holders and boring bars Typical application: external and internal turning; interrupted cuts and unstable conditions FAQ Which materials is this insert best suited for? The DNMG150408 T9235 insert is primarily intended for machining steel, with the T9235 grade optimised for lower cutting speeds, interrupted cuts and less stable conditions. What is the corner radius and how does it affect machining? This insert has a 0.8 mm corner radius, which provides a stronger edge for higher feed scenarios and interrupted cutting while maintaining acceptable surface finish for common turning tasks. Is the plate indexable and how many usable edges are available? The rhombic DNMG150408 is double-sided, allowing both faces to be used; indexing extends usable life and reduces tooling costs per edge. How can compatibility with existing holders be checked? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; verify those parameters against the holder specifications to ensure secure clamping for DNMG150408. Is this insert recommended for interrupted cuts? Yes — the T9235 grade and the plate geometry are designed to tolerate interrupted cuts and unstable machining conditions, improving production reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T9235 for reliable performance in interrupted cuts and the 0.8 mm corner radius for robust edge life; order the insert directly via Metav Werkzeuge or request technical advice from our consultants. DNMG 150408 T9235 – indexable turning insert (CVD‑coated carbide, 0.8 mm radius) by Tungaloy DNMG 150408 T9235 is an ISO‑standard indexable turning insert designed for external and internal turning, offering a robust carbide grade tailored to unstable cutting conditions. *ISO‑standard DNMG 150408 insert *CVD‑coated carbide grade T9235 *0.8 mm corner radius for stable edges *Double‑sided, cylindrical‑hole design Reliable cutting performance in unstable cuts The T9235 grade is a CVD‑coated carbide designed to maintain cutting performance at lower cutting speeds and under interrupted or unstable conditions. The combination of a wear‑resistant coating and a tough substrate helps to resist chipping during heavy or variable engagement, so the insert delivers consistent results even when stability is limited. The 0.8 mm corner radius provides a compromise between edge strength and surface finish, reducing the risk of premature edge failure while keeping roughness levels acceptable for finishing passes. Seamless integration with ISO tooling systems As an ISO‑standard DNMG insert, compatibility depends on geometric match: form, 0° relief angle, tolerance class, fastening method, size and thickness. The rhombic plate form with a cylindrical hole and the specified 4.76 mm plate thickness ensure positive clamping in suitable holders and boring bars. The insert’s 55° approach configuration supports standard toolholders for general turning tasks, so the component integrates cleanly into established tool systems without special adaptors. Durable edge life and steady process security The double‑sided design provides two usable edges per side, extending the service interval before indexation. The CVD coating improves resistance to abrasion and built‑up edge formation when machining common steels, while the substrate toughness reduces chipping risk during interrupted cuts. Together, these characteristics contribute to stable tool life and predictable performance over series production, which supports higher process reliability and less frequent tool changeovers. Practical selection and system considerations For efficient implementation, choose the double‑sided chipbreaker and the T9235 grade in line with the workpiece material and machine stability. Typical applications include external and internal turning where interrupted cuts or variable engagement occur. The cutting system comprises the ISO insert, a compatible external holder or boring bar, a shim/clamping set and replacement screws; matching form, free angle and tolerance class is essential for secure clamping and repeatable positioning. For customers requiring guidance on holder compatibility or chipbreaker selection, technical support is available. Contact Metav Werkzeuge for availability and tailored recommendations on Tungaloy DNMG 150408 T9235 inserts via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6785795 Manufacturer SKU: TUN6785795 SKU: 6785795-Tungaloy Manufacturer article number: 6785795 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Material: Carbide Core data Corner radius: 0.8 mm Approach/lead angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Inscribed circle: 15 mm Double‑sided: 2 usable faces Special features Coating: CVD Grade: T9235 Carbide substrate Rhombic plate form Cylindrical hole Double‑sided chipbreaker Application: external and internal turning ISO designation: DNMG150408 Compatibility: form, relief angle, tolerance, fastening, size, thickness FAQ What materials is this insert suitable for? The T9235 grade is formulated for machining Stahl (steel) under lower cutting speeds and in interrupted or unstable cutting situations; its CVD‑coated carbide construction provides wear resistance and toughness for common steel applications. How many usable cutting edges does the insert provide? This double‑sided DNMG insert offers two usable edges per side, giving multiple indexations before disposal and supporting extended tool life in production runs. Which holders are compatible with this ISO insert? Compatibility requires a matching ISO DNMG‑type holder; the clamping relies on form, 0° relief, tolerance class, fastening method, plate size and thickness (4.76 mm) for correct seating and repeatability. What advantage does the 0.8 mm corner radius offer? A 0.8 mm corner radius increases edge robustness, reducing the likelihood of chipping in interrupted cuts while maintaining acceptable surface quality for general turning operations. Does the insert include a chipbreaker and how does it affect performance? Yes; the insert features a double‑sided chipbreaker, which helps control chip formation and evacuation, improving process stability and reducing the risk of entanglement in variable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9235 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade that maintains tool life under interrupted cuts and unstable conditions; the ISO rhombic geometry and 0.8 mm corner radius support consistent surface quality and repeatable results. Order the insert directly via Metav Werkzeuge or consult the technical team for fitment and process parameters. DNMG150408 T9235 DNMG Turning Insert by Tungaloy — CVD-coated carbide, 0.8 mm radius A DNMG150408 T9235 indexable insert for turning, designed for external and internal turning of steel where interrupted cuts and limited stability demand a tough, reliable grade. CVD-coated carbide grade T9235 Tough grade for interrupted cuts ISO rhombic DNMG geometry 0.8 mm corner radius, 55° lead angle Double-sided chipbreaker with cylindrical hole Consistent metal removal and predictable tool life The combination of a CVD-coated carbide substrate and the T9235 tough grade delivers predictable performance when machining steel at moderate cutting speeds. The coating enhances wear resistance while the substrate resists chipping under impact, so the insert sustains material removal even with interrupted cuts. This leads to fewer unscheduled tool changes and a steadier production flow, supporting higher overall process efficiency and lower per-part tooling costs. Stability in unstable set-ups and interrupted operations Where rigidity is limited or cuts are frequently interrupted, the toughened carbide composition provides improved fracture resistance compared with standard grades. The 0.8 mm corner radius and rhombic DNMG form produce a balance between edge strength and surface finish, reducing the risk of chipping during abrupt tool engagement. Choosing this grade and geometry therefore supports reliable batch processing and reduces the risk of scrap in sensitive turning operations. Clear compatibility and straightforward mounting The insert is supplied in the ISO DNMG form (ISO code 150408) with a cylindrical hole and is compatible with standard DNMG external holders and boring bars when matched by form, relief angle and tolerance class. The 55° lead angle and 0° relief require attention during holder selection; selecting a holder with matching seat and clamp geometry ensures repeatable positioning and secure clamping. This alignment reduces vibration and improves dimensional consistency part-to-part. Practical materials and applications explained Manufactured from carbide and finished with a CVD coating, the grade is tailored primarily for machining steel in conditions where toughness is prioritised over maximum cutting speed. The double-sided chipbreaker design allows economical use of each insert face, and the plate thickness of 4.76 mm supports stable seating in standard toolholders. For external and internal turning tasks where interrupted cuts, unstable set-ups or variable workpiece conditions occur, this insert offers a robust, economical solution. For product supply, technical fitment advice or to request compatible holders and clamping sets, contact Metav Werkzeuge — Metav Werkzeuge provides expert consultation and prompt dispatch for production-ready tooling Technical Data Article number: 6785803 Manufacturer SKU: TUN6785803 Internal SKU: 6785803-Tungaloy Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Corner radius: 0.8 mm Insert code: 150408 Lead/angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 Special features / Versions Shape: rhombic (DNMG) Hole: with hole, cylindrical hole Chipbreaker: double-sided Grade: T9235 (CVD-coated carbide) Application: turning (external and internal) Typical assembly: ISO insert, matching external holder or boring bar, shim/locking set, replacement screw FAQ What materials is this insert intended for? The DNMG150408 T9235 insert is optimised for steel machining; the CVD-coated T9235 grade emphasises toughness for interrupted cuts and less stable conditions. Can the insert be used on both external and internal turning applications? Yes, the rhombic DNMG form and cylindrical hole allow use in both external holders and compatible boring bars for internal turning when the holder geometry matches the insert form and clearance. How does the T9235 grade perform compared with general-purpose grades? The T9235 grade offers increased resistance to chipping and breakage under interrupted cuts due to its tougher carbide substrate combined with a wear-resistant CVD coating, improving process reliability in challenging set-ups. What key dimensions should be checked before ordering holders? Ensure compatibility with the ISO code 150408, the 0.8 mm corner radius, the 4.76 mm plate thickness, the 55° lead angle and the presence of a cylindrical hole for correct clamping and seating. Is the insert reversible and economical in use? The double-sided chipbreaker design permits indexation of two cutting edges per insert, extending the service life per item and improving cost efficiency for batch operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9235 grade and the rhombic DNMG150408 form for reliable performance in unstable and interrupted turning conditions; the double-sided design and defined 0.8 mm nose radius deliver economical indexable tooling that integrates with ISO holders. Order through Metav Werkzeuge or consult the technical team for application support. DNMG150408 T9235 indexable turning insert for Turning — Tungaloy, CVD-coated, 55° DNMG150408 T9235 is an ISO-format indexable insert engineered for external and internal turning operations, optimised for steel machining under interrupted cuts and unstable conditions. CVD-coated cemented carbide T9235 Rhombic 55° geometry for versatile turning 0.8 mm nose radius for defined profile Double-sided insert with cylindrical hole Greater process reliability in interrupted and unstable turning The CVD-coated T9235 grade provides a tougher cutting edge suitable for lower cutting speeds and interrupted cuts, reducing the risk of premature edge failure when machining less stable setups. The substrate of cemented carbide combines hardness and fracture resistance so that the cutting edge maintains form under shock loads. Specifying this format supports a consistent production flow: the double-sided design doubles the usable edge life, lowering tooling changes and improving overall machining uptime. Controlled chip formation and consistent surface quality The rhombic 55° geometry and the double-sided chipbreaker contribute to predictable chip control and stable cutting forces, which in turn enhance surface finish and dimensional consistency on turned components. A 0.8 mm nose radius creates a defined profile that balances form accuracy with tool strength, making the insert suitable for finishing passes where repeatability matters. The combination of geometry and chip control reduces secondary operations and supports economical cycle times on serial production. Simple integration and economical use in ISO tool systems As an ISO-format indexable solution, the insert fits a wide range of DNMG-compatible holders when the form, clearance angle, tolerance class, fixing method, size and thickness match the clamping system. The DNMG150408 format, 4.76 mm plate thickness and the cylindrical hole ensure secure clamping in standard holders, while the double-sided layout offers cost-effective edge rotation. Specification of this insert promotes predictable tool-change planning and straightforward stock management for machining shops and production cells. Contact Metav Werkzeuge for tailored application advice on Tungaloy DNMG150408 T9235 inserts and immediate availability — e-mail info@metav-werkzeuge.com or call +49 2822 7131930 for fast technical support and delivery options Technical data Article number: 6785881-Tungaloy Manufacturer article number: 6785881 Manufacturer SKU: TUN6785881 Model series: ISO turning indexable inserts Material: cemented carbide Facts Corner radius: 0.8 mm Geometry/approach angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Special features Coating / grade: T9235 — CVD-coated cemented carbide Rhombic plate shape (DNMG) Double-sided insert with double-sided chipbreaker With cylindrical hole for secure clamping ISO DNMG150408 format Intended use: external and internal turning; suited to interrupted cuts and unstable conditions FAQ What materials is this insert designed for? The Tungaloy DNMG150408 T9235 insert is formulated for machining steel and other ferrous materials, with the T9235 grade offering toughness for interrupted and unstable cutting conditions. How does the T9235 coating affect tool life? The CVD-coated T9235 grade on the DNMG150408 insert increases resistance to abrasive wear while maintaining edge toughness, which supports longer life in low-speed, interrupted turning operations. Is this insert compatible with standard DNMG holders? Yes, the insert follows ISO DNMG150408 dimensions and fits compatible DNMG holders when form, clearance angle, tolerance class, fixing method, size and thickness correspond to the clamping system. What benefits does the 55° geometry provide? The 55° rhombic geometry balances radial and axial force components, improving accessibility for profiling and enabling stable cutting action that benefits surface finish and dimensional control. Can the insert be rotated to use multiple cutting edges? The double-sided configuration of the DNMG150408 T9235 insert allows rotation to an unused edge, improving tool economy and reducing the frequency of insert changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150408 TH10 Wendeplatten - Tungaloy
DNMG150408 TH10 Wendeplatte für Drehen von Tungaloy Die DNMG150408 TH10 ist eine ISO-genormte, unbeschichtete Hartmetall-Wendeplatte für das Außen- und Innendrehen und eignet sich besonders für Nichteisenwerkstoffe sowie Anwendungen mit niedrigen Schnittkräften. ISO-genormt für hohe Austauschbarkeit Unbeschichtete Sorte TH10 für niedrige Schnittkräfte Rhombische Form 55° für vielseitige Einsetzbarkeit Doppelseitig nutzbar für kosteneffizienten Einsatz Mit zylindrischem Loch für standardisierte Spannsysteme Höhere Produktivität durch Materialwahl und Geometrie Die unbeschichtete Sorte TH10 besteht aus Hartmetall und wurde entwickelt, um niedrige Schnittkräfte und eine saubere Oberflächengüte bei Nichteisenwerkstoffen zu unterstützen. Das unbeschichtete Schneidstoffbild reduziert Aufbauschneiden und ermöglicht geringere Vorschübe ohne Leistungseinbußen. Für Anwender bedeutet das: weniger Maschinenzeit und gleichbleibende Bearbeitungsqualität bei anspruchsvollen Oberflächenanforderungen. Praxistauglichkeit im Produktionsalltag Für das Außen- und Innendrehen empfiehlt sich die Wahl der passenden Spanbrecherform und Sorte entsprechend Werkstoff und Stabilität der Aufspannung. Die Kombination aus ISO-Genormtheit und klarer Formgebung macht die Platte kompatibel mit vielen Haltern; die Passung hängt von Form, FreiWinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Wer wiederholgenaue Prozesse benötigt, profitiert von der einfachen Austauschbarkeit und der stabilen Spanbildung. Effizienz durch Geometrie und Ausführungsmerkmale Die rhombische Plattenform mit 55° Winkel bietet hohe Flexibilität bei unterschiedlichen Einstellwinkeln, während der doppelseitig nutzbare Aufbau die Stückkosten senkt, da beide Schneidkanten verwendet werden können. Das zylindrische Loch erlaubt eine sichere Klemmung im Halter, und der Eckenradius sorgt für kontrollierten Spanverlauf. Kurze Erläuterung: „doppelseitig“ bedeutet, die Platte kann nach dem Wenden erneut genutzt werden, was Materialkosten und Stillstandszeiten reduziert. Empfehlung: Für produktive Zerspanung von Nichteisenwerkstoffen die TH10-Sorte von Tungaloy wählen und bei Fragen direkt Metav Werkzeuge per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 6803379 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller-SKU: TUN6803379 Fakten Plattengröße: 15 mm Plattendicke: 4,76 mm Eckenradius: 0,8 mm FreiWinkel: 0° Winkel: 55° Besonderheiten Material: Hartmetall Sorte: TH10 Schneidstofftyp: unbeschichtetes Hartmetall Form: Rhombisch Loch: mit Loch (zylindrisches Loch) Spanbrecher: doppelseitig Anwendung: Drehen ISO-Bezeichnung: DNMG150408 FAQ Welche Werkstoffe sind für die DNMG150408 TH10 geeignet? Die DNMG150408 TH10 von Tungaloy ist besonders für Nichteisenwerkstoffe geeignet; die unbeschichtete Hartmetallsorte unterstützt niedrige Schnittkräfte und saubere Oberflächen. Ist die Wendeplatte beidseitig verwendbar? Ja, die Platte ist doppelseitig ausgeführt, das heißt die zweite Schneidkante kann nach dem Wenden genutzt werden, was die Wirtschaftlichkeit erhöht. Welche Befestigungsart hat die Platte? Die DNMG150408 TH10 verfügt über ein zylindrisches Loch zur Standardbefestigung im Halter; die Kompatibilität hängt von Form, Größe und Toleranzklasse des Halters ab. Welche Rolle spielt der FreiWinkel 0° bei der Anwendung? Ein FreiWinkel von 0° beeinflusst die Spanbildung und Schlichtfähigkeit; er ist besonders bei bestimmten Einspann- und Vorschubkombinationen vorteilhaft und sollte in der Prozessplanung berücksichtigt werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 150408 TH10 Wendeplatten - Tungaloy
Take advantage of the sharp TH10 grade and the low cutting forces of this uncoated cemented carbide insert to achieve cleaner surfaces and efficient turning in non-ferrous applications; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation. DNMG 150408 TH10 Turning Insert – Tungaloy (rhombic, 0.8 mm radius) The DNMG150408 TH10 is an ISO-standard rhombic indexable insert for turning, optimised for non-ferrous materials and operations where a sharp, uncoated cutting edge reduces cutting forces and improves surface finish ISO rhombic indexable insert DNMG150408 Sharp TH10 uncoated carbide grade 0.8 mm corner radius for controlled cuts Double-sided chipbreaker with central hole Consistent surface quality through precise chip control The rhombic geometry combined with the double-sided chipbreaker delivers stable chip formation and predictable evacuation, which results in a cleaner surface finish on non-ferrous components. The uncoated cemented carbide grade TH10 is designed for applications that benefit from low cutting forces; this reduces tool load and helps maintain dimensional accuracy during external and internal turning. For operators seeking reproducible results, the insert’s geometry and chipbreaker design translate directly into fewer reworks and less manual finishing. Efficient cutting with reduced forces and reliable edge behaviour The sharp, uncoated cutting edge of this turning insert is suitable where low cutting resistance and minimal built-up edge are required. A corner radius of 0.8 mm balances edge strength with the ability to produce fine contours, while the 0° relief angle supports light to moderate depth cuts typical in finishing and profile turning. These properties lead to lower spindle loads and can permit higher feed rates in compatible setups, improving cycle times without sacrificing surface integrity. Designed for simple integration into ISO tool systems Compatibility with the toolholder is governed by form, relief angle, tolerance class, fastening method, size and thickness; this insert is supplied in the ISO 150408 format and fits standard DNMG pockets. The central cylindrical hole enables secure clamping and correct seating in many external holders and boring bars. When pairing with a holder, select a matching pocket geometry and clamping set to ensure repeatable positioning and optimal cutting angles for longer service life. Practical benefits for workshop workflows With a plate thickness of 4.76 mm and a nominal size of 15 mm, the insert provides a robust contact area for stable clamping and heat dissipation. The uncoated TH10 grade is advantageous where low cutting temperatures and gentle edge action matter most, for example when machining aluminium alloys, brass and other non-ferrous materials. Suppliers and process planners will note the straightforward replacement and the ability to use the insert on a range of turning tasks, helping to reduce inventory complexity while maintaining performance. For application support or to check holder compatibility for the Tungaloy DNMG150408 TH10 insert, contact Metav Werkzeuge for tailored technical advice and fast availability via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 6803359 Manufacturer SKU: TUN6803359 SKU: 6803359-Tungaloy Grade: TH10 Material: cemented carbide Format: ISO 150408 Facts Corner radius: 0.8 mm Thickness: 4.76 mm Plate size: 15 mm Relief angle: 0° Principal angle: 55° Special features Rhombic plate form Cylindrical central hole Double-sided chipbreaker Uncoated cutting edge Intended application: turning System: indexable insert for external and internal turning FAQ Is this insert suitable for aluminium and other non-ferrous metals? Yes. The TH10 uncoated carbide grade of the DNMG150408 TH10 insert is intended for non-ferrous materials and supports low cutting forces and clean surface results. How is the insert secured in the holder? The insert has a cylindrical central hole and is designed to be clamped in standard DNMG-compatible holders; correct seating depends on matching pocket form and clamping hardware. What corner radius and thickness does the insert have? The DNMG150408 TH10 features a 0.8 mm corner radius and a plate thickness of 4.76 mm, offering a balance of edge strength and fine cutting performance. Can the insert be used for both external and internal turning? Yes. The ISO-format insert is suitable for both external and internal turning operations when installed in an appropriate holder or boring bar. What are the key advantages of the TH10 grade? The TH10 grade provides a sharp, uncoated cutting edge that reduces cutting forces and helps produce cleaner surfaces in non-ferrous machining with predictable edge behaviour. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 AH110 Wendeplatten - Tungaloy
Combining a PVD-coated carbide grade AH110 for wear and breakage resistance with a 1.2 mm corner radius and ISO DNMG geometry ensures a stable, sharp-edge turning performance and simple integration into standard holders; order the DNMG150412 AH110 Tungaloy insert directly via Metav Werkzeuge or request advice from our consultants if required. DNMG 150412 AH110 Tungaloy turning insert — PVD-coated carbide, 55° rhombic The DNMG150412 AH110 Tungaloy insert is an ISO-standard rhombic turning insert engineered for reliable external and internal turning applications where a sharp cutting edge and process security are required. PVD-coated carbide grade AH110 ISO DNMG150412 rhombic form 1.2 mm corner radius for strength Double-sided chipbreaker, with hole High wear resistance and predictable edge life for continuous production The DNMG150412 AH110 combines a PVD coating with a wear-resistant carbide substrate to offer enhanced flank and crater wear resistance while maintaining a sharp cutting edge. This combination supports stable machining forces and predictable tool life, which helps to reduce unplanned stops and improves overall throughput. The AH110 grade is formulated for both abrasion resistance and fracture toughness, giving a balance between long life and reliable performance under interrupted cuts. ISO compatibility and simple holder integration for efficient set-up Designed to the ISO series for turning inserts, the geometry and tolerances of this rhombic type guarantee compatibility with a wide range of standard clamping systems. The 55° approach angle and rhombic outline ensure good access for facing and profiling, while the 4.76 mm plate thickness and cylindrical hole accommodate secure fastening in common DNMG holders. Because holder compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness, this insert integrates smoothly into established tool systems and reduces inventory complexity. Reliable chip control and versatility across turning operations The double-sided chipbreaker design supports controlled chip formation for both continuous and interrupted turning, improving process stability during external and internal operations. The 1.2 mm corner radius increases edge strength, reducing the risk of chipping when machining harder or less stable setups. For shops aiming for consistent surface finish and repeatable dimensions, this indexable insert delivers the necessary combination of edge robustness and chip management to maintain cycle times and quality. Practical recommendations for selection and use For best results, match the chipbreaker and grade to the workpiece material and machining parameters: choose the AH110 grade when a balance of wear resistance and edge toughness is required, and select a chip geometry appropriate to depth of cut and feed. Ensure secure clamping and correct seating in the holder to leverage stable clamping and prevent vibration. Regular inspection and correct indexing of the insert will preserve surface finish and dimensional accuracy across production runs. For precise turning applications with Tungaloy’s AH110 grade, contact Metav Werkzeuge for tailored recommendations and prompt availability; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6811747 Manufacturer SKU: TUN6811747 Label: DNMG150412 AH110 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Approach angle: 55° Special features PVD-coated carbide (AH110) Rhombic insert, double-sided chipbreaker Cylindrical hole for fastening ISO-standard turning insert for external and internal turning Compatible with standard DNMG holders when matched by form and tolerance FAQ What materials is this insert best suited for? The DNMG150412 AH110 Tungaloy insert is designed primarily for steels and general turning tasks where wear resistance and edge toughness are required; choose the chipbreaker and cutting data to match the specific workpiece material. Is the insert indexable and reversible? Yes, the rhombic shape with a double-sided chipbreaker provides multiple cutting edges per indexable insert, allowing economical reversal or indexing during production. How does the AH110 grade affect machining performance? The AH110 grade offers a balanced PVD-coated carbide combination that improves wear resistance and fracture toughness, enhancing process security and extending service intervals under typical turning conditions. Can this insert be used for internal turning and profiling? The rhombic geometry and 55° approach angle make it suitable for both external and internal turning tasks, including profiling where access and lead angle are important. What is the correct way to ensure holder compatibility? Verify that the holder matches the insert outline, clearance angle, tolerance class, fastening method, size and thickness; correct seating and clamping are essential to achieve the rated performance and avoid vibration or chipping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 AH110 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant PVD coating and a sharp 55° rhombic geometry for consistent, secure cutting. The combination of PVD‑coated carbide and a 1.2 mm corner radius delivers reliable edge life and stable chip control, reducing unplanned tool changes—order or request advice via Metav Werkzeuge for application support. DNMG150412 AH110 Tungaloy turning insert — 55° rhombic, PVD‑coated carbide The DNMG150412 AH110 is a rhombic indexable insert designed for general turning, offering a wear‑resistant cutting edge and suitability for a wide range of turning operations. PVD-coated carbide for wear resistance Sharp 55° rhombic geometry for precise turning Double-sided chipbreaker for economical indexing Dependable cutting performance for consistent process security The combination of a PVD‑coated surface and a wear‑resistant carbide substrate provides a balanced performance that favours long life and stable machining. The PVD layer reduces flank wear and helps to maintain a sharp cutting edge, resulting in more consistent surface finishes and fewer interruptions for tool changes. For production environments where repeatability and process security are priorities, this geometry supports predictable tool behaviour and reduced scrap rates. Geometry and dimensions that aid precision and versatility The insert’s 55° rhombic shape and 1.2 mm corner radius deliver a compromise between robustness and fine detail in finishing passes. The nominal plate size and 4.76 mm thickness give mechanical stability under load, while the cylindrical hole and standard ISO form ensure straightforward mounting in compatible holders. Because compatibility depends on holder form, clearance angle, tolerance class and thickness, the insert is best used with ISO‑standard turning toolholders matched to these parameters for secure clamping and accurate positioning. Chip control and economy through smart design Equipped with a double‑sided chipbreaker, the insert supports controlled chip formation across a variety of cutting conditions. Controlled chips lower the risk of entanglement and improve surface integrity, which in turn reduces secondary operations and handling. The double‑sided design enhances economy by providing extended usable life through indexability; when one edge loses performance, the insert can be reindexed to expose a fresh cutting edge, making the tooling cost per edge more efficient. Material suitability and application guidance This grade is a PVD‑coated carbide designed for turning tasks where a balance of sharpness and process reliability is required. Selection of the chipbreaker and grade should be aligned with the workpiece material and the intended cutting parameters. The insert is intended for external and internal turning; choose feeds, speeds and depth of cut according to the workpiece and machine capability to exploit the AH110 grade’s resistance to wear and chipping. Practical handling, compatibility and logistics The insert is supplied to ISO standards, simplifying inventory management and replacement across ISO‑compliant holders. Compatibility checks should verify form, clearance angle, tolerance class, fastening method, size and thickness before ordering. For specifications, tooling compatibility or batch supply, consult Metav Werkzeuge for tailored recommendations that match the production environment and machining goals. Contact Metav Werkzeuge for application advice, availability and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6803443 SKU (merchant): 6803443-Tungaloy Manufacturer SKU: TUN6803443 Model series: ISO turning indexable inserts Facts Corner radius: 1.2 mm Angle: 55° Plate thickness: 4.76 mm Plate size: 15 mm Special features PVD‑coated carbide grade AH110 Rhombic plate form Cylindrical hole 0° clearance angle Double‑sided chipbreaker Application: turning (external and internal) ISO‑standard indexable insert compatible with ISO holders FAQ What materials is this insert suitable for? The DNMG150412 AH110 Tungaloy insert is a PVD‑coated carbide grade designed for a broad range of turning tasks; selection of the chipbreaker and cutting data should be adapted to the specific workpiece material for optimal results. How does the double‑sided chipbreaker benefit production? A double‑sided chipbreaker offers improved chip control and extended edge life through indexability, which reduces tooling costs per cutting edge and minimises downtime for replacements. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and plate dimensions; the DNMG150412 fits ISO‑standard external holders that accept rhombic DNMG inserts. Is the coating suitable for high‑speed turning? The PVD coating enhances wear resistance and supports stable performance at elevated cutting speeds; choose cutting parameters in line with machine capability and material to exploit this advantage. What is the recommended action if chipping occurs? Verify that the holder clamping and stability are correct, check cutting data and cooling conditions, and consider an alternative chipbreaker or a different cutting grade if chipping persists with the DNMG150412 AH110. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150412 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH120, a double-sided chipbreaker and ISO compatibility for reliable, repeatable turning performance. Order directly via Metav Werkzeuge or consult our specialists for application support and stock information. DNMG 150412 AH120 Indexable Turning Insert for Turning — Tungaloy The DNMG150412 AH120 is an ISO-standard indexable insert designed for external and internal turning, offering a PVD-coated carbide grade for a sharp cutting edge and high process security. ISO rhombic insert DNMG 55° geometry PVD-coated carbide grade AH120 Double-sided chipbreaker for process security Cylindrical hole mounting, 4.76 mm thickness Consistent edge life through a specialised grade The AH120 grade is a PVD-coated carbide developed for wear resistance and reduced chipping during turning operations. As a result, the insert delivers a stable cutting edge that supports longer tool life and fewer indexings, which contributes to lower tool consumption and higher machine uptime. The combination of the coating and carbide substrate promotes reliable performance when a sharp edge and repeatable results are required, especially in medium-duty production environments. Designed for fast, secure tool changes and straightforward mounting The rhombic plate with a 55° main cutting geometry and a cylindrical hole ensures simple seating in ISO-compatible toolholders. The plate thickness of 4.76 mm and standard hole position match common clamping kits and screws, enabling quick insert changes and minimising downtime. The double-sided design provides two usable cutting edges per side, extending service intervals and improving cost efficiency in series turning. Application scope and machining advantages Optimised as an indexable solution for turning, the insert excels in external and internal turning operations where a balanced trade-off between edge sharpness and robustness is needed. The 1.2 mm corner radius supports dimensional stability and surface finish while the neutral relief angle (0°) helps maintain predictable chip flow with a double-sided chipbreaker that is suitable for a range of feed rates and material groups. The result is higher process security and consistent component quality in batch production. For tailored advice on integrating this Tungaloy DNMG150412 AH120 insert into a machining setup, or to check immediate availability with Metav Werkzeuge, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt guidance. Technical Data Article number: 6810208-Tungaloy Manufacturer SKU: TUN6810208 Manufacturer article number: 6810208 Model series: ISO turning indexable inserts Core technical data Cutting geometry angle: 55° Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 15 mm Relief angle: 0° Designs & special features Material: carbide Coating: PVD Grade: AH120 Plate form: rhombic Chipbreaker: double-sided Mounting: cylindrical hole Application: turning (external and internal) ISO-compatible insert for standard holders FAQ What materials is this insert suitable for? The Tungaloy DNMG150412 AH120 insert is intended for a broad range of turning tasks; the PVD-coated carbide AH120 provides wear resistance and reliability across many common engineering materials. How is the insert mounted in the toolholder? Mounting uses the cylindrical hole and standard ISO seating; the plate thickness of 4.76 mm and the ISO rhombic form ensure compatibility with corresponding toolholders and clamping sets. How many cutting edges are available per insert? The insert is double-sided with a chipbreaker on each side, providing multiple indexable edges to extend service life and reduce replacement frequency. Which geometry does the insert use for cutting? The plate features a 55° rhombic geometry with a 1.2 mm corner radius and a neutral relief angle (0°), balancing finish quality and robustness for consistent turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com