DNMG 150604 AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH120 carbide for extended wear resistance and a 0.4 mm corner radius for consistent profile control; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG150604 AH120 Tungaloy turning insert — PVD-coated carbide, 0° clearance angle DNMG150604 AH120 is an ISO‑format indexable turning insert designed for external and internal turning applications where a sharp, process‑reliable cutting edge is required PVD-coated carbide AH120 for wear resistance Rhombic DNMG, 15 mm inscribed circle 0.4 mm corner radius, precise profile control Double-sided chipbreaker with cylindrical hole Consistent turning performance with process security The PVD-coated carbide grade AH120 delivers a balance of wear resistance and edge toughness suitable for a wide range of turning tasks. The insert’s rhombic DNMG geometry and 55° included angle provide a stable cutting orientation that reduces vibration during external and internal turning. Because the grade is designed to be resistant to both wear and chipping, the component contributes to predictable tool life and reproducible part quality in serial production. Compatibility with ISO holders is governed by shape, clearance, tolerance class, fastening and thickness, ensuring interchangeability in standard tool systems. Practical compatibility and mounting guidance The insert features a cylindrical centre hole and double-sided chipbreaker, allowing economical twice‑use of the cutting edges and straightforward securing in compatible holders. The 0° clearance angle and 6.35 mm thickness mean that correct holder selection is essential for achieving intended cutting geometry; holders must match the inscribed circle and clamping method. The system is typically composed of the ISO insert, a matching external holder or boring bar, a locating pad/clamp set and replacement screws. Clear, standardised dimensions make it simpler to select a matching toolholder and predict assembly tolerances. Edge stability, chip control and surface results A 0.4 mm corner radius produces a defined cutting edge radius that aids in achieving consistent profiles and surface finish while moderating cutting forces. The double-sided chipbreaker enhances chip control across nominal cutting conditions and contributes to safe swarf evacuation. For applications where surface integrity and repeatability are crucial, the PVD coating on the carbide substrate maintains edge sharpness and reduces adhesive wear at elevated temperatures, which supports higher cutting speeds and longer uninterrupted cycles. Where this insert excels in production This ISO‑format insert is intended for general turning operations where a combination of sharp cutting geometry and process reliability is required. It is particularly well suited to medium‑duty turning regimes where the workpiece material and machining parameters call for a wear‑resistant grade with good chipping resistance. The standardized geometry and robust coating enable predictable behaviour in both single‑pass and multi‑pass operations, helping to streamline tool inventory and reduce setup variability. Contact Metav Werkzeuge for tailored machining recommendations and to request a quotation for the Tungaloy DNMG150604 AH120 turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability Technical data Manufacturer article number: 6814023 SKU: 6814023-Tungaloy Manufacturer SKU: TUN6814023 Designation: DNMG150604 AH120 Facts Inscribed circle: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° Design / Special features Rhombic insert form (DNMG) PVD-coated carbide grade AH120 Double-sided chipbreaker Cylindrical centre hole ISO turning indexable insert, compatible with standard holders Suitable for external and internal turning FAQ What materials is this insert suited for? The DNMG150604 AH120 Tungaloy turning insert is formulated for general turning tasks where a wear‑resistant PVD coating and tough carbide substrate are beneficial; selection of the correct chipbreaker and grade is advised according to workpiece material. How is the insert mounted in a toolholder? The insert is located by its rhombic form and secured through the cylindrical centre hole; the DNMG150604 AH120 must be paired with a holder that matches the inscribed circle, thickness and clamping style. Can the insert be used on both external and internal turning? Yes, the ISO‑format DNMG150604 AH120 insert is suitable for both external and internal turning operations when combined with the appropriate external holder or boring bar. How many cutting edges are available per insert? Owing to the double‑sided design and standard geometry, multiple usable edges are provided; the DNMG150604 AH120 Tungaloy insert can be indexed as specified by the insert orientation to use additional edges. What are the main advantages of the AH120 grade? The AH120 PVD‑coated carbide offers a blend of wear resistance and edge stability, delivering process security and reduced risk of edge breakouts in common turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade and a double-sided chipbreaker for consistent edge life and reliable machining performance; order directly via Metav Werkzeuge or contact our consultants for tailored application advice. DNMG150604 AH120 – Indexable turning insert (turning) by Tungaloy, PVD-coated carbide DNMG150604 AH120 is an ISO-standard rhombic indexable insert for external and internal turning, providing a wear- and chipping-resistant PVD-coated carbide grade designed for process-secure machining. PVD-coated carbide AH120 0.4 mm corner radius Rhombic 55° insert geometry Double-sided chipbreaker, cylindrical hole Consistent cutting performance for demanding turning operations The combination of a PVD-coated surface and the AH120 carbide grade delivers a balance of wear resistance and edge toughness that improves tool life and process reliability. The coating reduces abrasive wear and supports a sharper cutting edge throughout longer cycles, which in turn lowers the frequency of insert changes and unplanned stoppages. For production environments where reproducible results and stable cutting conditions matter, this insert is geared towards maintaining surface quality and dimensional consistency across batches. ISO compatibility and secure clamping for predictable results Built to ISO dimensions, the insert ensures straightforward compatibility with standard holders; compatibility depends on form, relief angle, tolerance class, fastening, size and thickness. The rhombic geometry with a 55° included angle and 0.4 mm corner radius offers a reliable cutting profile for a wide range of turning tasks, while the 6.35 mm thickness supports secure clamping and rigidity in the toolholder. Clear specification of these parameters simplifies tool selection and reduces set-up variability, enabling predictable cycle times and minimised vibration. Improved chip control and flexible application choices A double-sided chipbreaker provides controlled chip formation on both faces, aiding evacuation in both external and internal turning. The rhombic shape combined with a cylindrical hole supports consistent seating and stable torque transmission when fastening to the holder. Select the chipbreaker variant, grade and mounting geometry to suit the workpiece material and machine stability; this targeted choice ensures effective chip control, safer swarf management and reduced risk of edge damage during interrupted cuts. Operational economy and ease of use in production As an indexable insert, the DNMG150604 design offers several usable edges before replacement, which lowers per-cutting-edge cost and simplifies inventory management. The robust grade and coating mean fewer tool changes and more time cutting, which translates into measurable productivity gains on the shop floor. Combined with the ISO form factor, the insert supports rapid changeover routines and predictable maintenance intervals, contributing to lower overall machining costs and steadier throughput in serial production. For specific machining recommendations, availability of the Tungaloy DNMG150604 AH120 insert and fast supply, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and tailored advice Technical data Article number: 6814013 SKU: 6814013-Tungaloy Manufacturer SKU: TUN6814013 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: AH120 Facts Corner radius: 0.4 mm Insert size: 15 mm Thickness: 6.35 mm Relief angle: 0° Included angle: 55° Special features ISO designation: DNMG150604 Rhombic plate shape Cylindrical hole for fastening Double-sided chipbreaker PVD-coated carbide (AH120) Application: Turning FAQ What operations is this insert designed for? The DNMG150604 AH120 Tungaloy indexable insert is designed for external and internal turning applications and is intended for operations where a sharp cutting edge and process security are required. Which workpiece materials suit this insert? The DNMG150604 AH120 grade is formulated for wear resistance and edge stability; the correct chipbreaker and machining parameters should be chosen according to the specific workpiece material and machine stability. How is the insert mounted and how is compatibility ensured? Compatibility with a holder is determined by form, relief angle, tolerance class, fastening, size and thickness; the DNMG150604 AH120 insert uses a cylindrical hole and ISO geometry for standardised mounting. What are the key dimensions to check before ordering? Check the corner radius (0.4 mm), insert size (15 mm), thickness (6.35 mm) and included angle (55°) when selecting the DNMG150604 AH120 insert to ensure proper fit and function. Is the insert reversible and how many cutting edges are available? The DNMG150604 AH120 Tungaloy insert features a double-sided chipbreaker and is indexable, offering multiple usable edges before replacement to optimise running costs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
Taking advantage of a universal AH6225 PVD coating combined with an ISO-standard rhombic geometry ensures stable cutting and simple toolholder interchangeability; this insert suits medium turning of stainless steel and similar alloys. Order the DNMG150604 AH6225 turning insert directly via Metav Werkzeuge or ask our consultants for application advice. DNMG150604 AH6225 DNMG turning insert, PVD-coated cemented carbide by Tungaloy, 55° lead angle DNMG150604 AH6225 is a rhombic, ISO-standard indexable insert for external and internal turning, designed for medium-duty cutting of stainless steel and mixed materials. ISO-standard rhombic insert PVD-coated cemented carbide grade AH6225 Double-sided chipbreaker for flexibility 6.35 mm thick, 15 mm size Cylindrical hole for secure clamping Reliable, measurable performance for production turning The rhombic indexable design delivers a predictable cutting geometry with a 55° lead angle, enabling effective chip control and consistent tool life under varying conditions. The PVD coating on the cemented carbide substrate provides wear resistance and maintains a sharp, stable cutting edge for medium machining. This combination reduces unplanned tool changes and supports steady cycle times in repetitive turning operations. Versatile application range with straightforward holder compatibility Manufactured to ISO dimensions, the insert fits a wide range of commercially available holders; compatibility depends on form, clearance angle (0°), tolerance class, fastening and thickness. The double-sided chipbreaker and 0.4 mm corner radius give a balance between edge strength and surface finish, making the insert suitable for both roughing and finishing passes on stainless steel and comparable alloys. Practical advantages for workshop efficiency A double-sided chipbreaker increases usage flexibility and lowers tooling costs per cutting edge, while the cylindrical hole ensures reliable clamping and repeatability after index changes. The 6.35 mm plate thickness and 15 mm size contribute to rigidity in the tool assembly, reducing vibration and improving surface quality on turned components. Application guidance and process focus Select the chipbreaker and grade orientation according to workpiece material and stability of the setup; the AH6225 grade is optimised for a sharp yet robust edge under medium cutting conditions. When higher thermal or abrasive demands arise, consider alternate grades or adjusted cutting parameters. For complex parts, confirm holder geometry and secure clamping to exploit the insert’s ISO-standard interchangeability and consistent performance. For reliable PVD-coated performance from Tungaloy and tailored application advice, contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability and ordering Technical Data Article number: 6825550 Manufacturer SKU: TUN6825550 SKU: 6825550-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: DNMG150604 AH6225 Tungaloy-Wendeplatte Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Lead angle: 55° Clearance angle: 0° Hole: with cylindrical hole Plate form: rhombic Double-sided chipbreaker Special features Grade/coating: AH6225, PVD-coated cemented carbide Application: Drehen (turning) ISO designation: DNMG150604 Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness Typical system: ISO insert + external holder or boring bar + clamping set and replacement screws FAQ What materials is this insert suited for? The DNMG150604 AH6225 insert from Tungaloy is specified for stainless steel and similar alloys; the AH6225 grade gives a sharp, stable edge for medium turning operations. Is the insert reversible and how many cutting edges are available? The insert is double-sided with a rhombic form; each side provides indexed edges according to the ISO geometry, extending usable life through straightforward indexing. Which holders are compatible with this ISO insert? Holders that accept DNMG-format inserts and match the 55° lead angle, 0° clearance and the plate thickness of 6.35 mm are compatible; secure clamping via the cylindrical hole is required for repeatable performance. How does the AH6225 grade affect process reliability? AH6225 is a PVD-coated cemented carbide grade optimised to balance a sharp cutting edge with good edge stability, improving productivity and tool life in varied turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
Take advantage of high process reliability and a stable cutting edge for consistent turning results; the combination of a PVD-coated carbide grade and a 55° rhombic geometry supports efficient machining of stainless steels. Order directly via Metav Werkzeuge or consult our specialists for application matching. DNMG 150604 AH6225 indexable turning insert for turning applications — Tungaloy DNMG150604 AH6225 is an ISO‑standard indexable turning insert designed for external and internal turning, offering a 55° rhombic geometry and a PVD‑coated carbide grade tailored to stainless steels PVD-coated AH6225 grade for stainless steels 55° rhombic geometry, 0.4 mm corner radius Double-sided insert with cylindrical hole Consistent cutting performance for medium-duty stainless turning This indexable insert delivers a reliable balance between sharpness and edge stability thanks to the AH6225 PVD-coated carbide. The coating reduces friction and improves heat resistance during interrupted cuts and changing conditions, which leads to longer tool life and more consistent component quality. By combining a defined geometry with a 0.4 mm corner radius, the insert supports predictable chip formation and good surface finish in medium cutting regimes, minimising rework and keeping cycle times steady. Secure clamping and ISO compatibility for flexible use The insert follows ISO‑standard dimensions and a cylindrical hole design, ensuring compatibility with a wide range of external holders and boring bars when matched by form, relief angle, tolerance class, clamping method, size and thickness. The 55° rhombic shape permits use for both external profiling and light internal operations, while the double‑sided configuration halves indexing frequency compared with single‑sided alternatives, supporting uninterrupted production runs and easier inventory management. Practical benefits from material and chip control The combination of the AH6225 grade and the insert’s double‑sided chipbreaker design improves chip control when machining stainless steels, where long, stringy chips can otherwise disrupt operations. The PVD coating enhances abrasion resistance and maintains a stable cutting edge across varying feeds and depths, which contributes to reduced tooling costs per component and a predictable machining window. For operations seeking repeatable surface quality and stable tool life, this insert offers a practical, workhorse solution. Contact Metav Werkzeuge for application advice or to request a quote for the Tungaloy DNMG150604 AH6225 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947193-Tungaloy Manufacturer SKU: TUN6947193 Model series: ISO-Drehwendeschneidplatten Facts Geometry angle: 55° Corner radius: 0.4 mm Plate thickness: 6.35 mm Plate size: 15 mm Relief angle (free angle): 0° Special features Material: carbide Coating: PVD-coated Grade: AH6225 Plate shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) ISO designation: 150604 FAQ What materials is this insert suited for? The DNMG150604 AH6225 insert is formulated for machining stainless steels, offering good edge stability and chip control in medium cutting conditions. How does the AH6225 grade improve tool life? AH6225’s PVD coating increases abrasion resistance and thermal stability, so the insert maintains a sharper edge longer under varying loads and interrupted cuts. Is the DNMG150604 compatible with standard ISO holders? Yes — the DNMG150604 follows ISO dimensions; compatibility depends on matching holder form, relief angle, tolerance class, clamping method, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade and a sharp, stable cutting edge tailored for rostfreier Stahl to improve process reliability and tool life. The insert’s rhombic 55° form, cylindrical hole and double‑sided chipbreaker allow flexible integration into ISO‑standard turning systems; order directly via Metav Werkzeuge or consult our specialists for cutting data and holder compatibility. DNMG150604 AH6225 Tungaloy turning insert — rhombic 55°, PVD‑coated carbide DNMG150604 AH6225 Tungaloy turning insert is an ISO‑standard rhombic insert for external and internal turning, optimised for medium‑duty machining of rostfreier Stahl with a sharp yet stable cutting edge. PVD‑coated carbide for high wear resistance Designed for rostfreier Stahl machining Rhombic DNMG 55° with cylindrical hole Double‑sided chipbreaker, 0.4 mm corner radius Consistent cutting performance for rostfreier Stahl The AH6225 grade is a PVD‑coated carbide developed as a universal option for rostfreier Stahl, balancing edge sharpness and stability under varying conditions. As an ISO‑conforming rhombic insert, it provides a defined 55° cutting geometry that simplifies process planning and helps maintain surface finish when tooling parameters change. The PVD coating improves wear resistance and reduces built‑up edge, which in turn supports longer tool life and fewer insert changes—benefits that translate to steadier throughput on the shop floor. Simple integration into ISO turning systems Compatibility with a toolholder is determined by insert geometry, clearance, tolerance class, fastening, size and thickness; this turning insert respects those ISO markers. The cylindrical hole and standard form make it straightforward to mount in matching external holders or boring bars, and the 0° clearance specification is reflected in holder selection and setup. Clear, repeatable mounting reduces set‑up time and ensures that process capability studies remain valid across tool changes. Practical machining advantages and chip control A double‑sided chipbreaker tailored to general turning keeps chips compact during external and internal operations, reducing downtime for chip handling. The 0.4 mm corner radius contributes to a robust cutting edge that resists chipping during transient cuts while still allowing reasonable corner strength for finishing passes. These characteristics support predictable tool wear and more consistent cycle times, offering a measurable improvement in productivity when compared with non‑optimised grades. Key specifications and handling notes The insert is supplied in ISO DNMG150604 form with a 6.35 mm thickness and a 15 mm inscribed circle, making it suitable for a wide range of standard holders. The carbide substrate provides the core strength; the PVD finish enhances surface endurance. For best results, select a holder and clamping kit rated for the DNMG form and verify the clearance and tolerance class to match the insert’s geometry. Regular inspection of the clamping screw and seat will help maintain repeatable accuracy in serial production. Contact Metav Werkzeuge for tailored cutting data, availability of the Tungaloy AH6225 grade and advice on holder selection to match application needs Technical data Article number: 6947175 Manufacturer SKU: TUN6947175 Designation: DNMG150604 AH6225 Tungaloy turning insert Facts Insert form: DNMG (rhombic), 55° Corner radius: 0.4 mm Thickness: 6.35 mm Inscribed circle: 15 mm Clearance angle: 0° Special features Material: carbide Coating: PVD (AH6225) Chipbreaker: double‑sided Hole: cylindrical, with hole ISO‑standard turning insert for external and internal turning FAQ What materials is this insert suitable for? The DNMG150604 AH6225 turning insert is intended primarily for rostfreier Stahl and other materials where a sharp, stable PVD‑coated carbide edge offers the best compromise between finish and tool life. How is the insert mounted in a toolholder? Mounting requires a compatible DNMG‑form holder with matching seat and fastening; the insert uses a cylindrical hole and standard clamping arrangement for secure fixation. What are the main advantages of the AH6225 grade? The AH6225 grade combines a PVD coating with a carbide substrate to deliver improved wear resistance, consistent cutting edge stability and reliable performance in medium‑duty stainless turning. Can the insert be used for internal as well as external turning? Yes, the rhombic geometry and double‑sided chipbreaker make the insert suitable for both external and internal turning applications when paired with the appropriate holder or boring bar. Is the insert reversible? The DNMG geometry with a double‑sided chipbreaker allows the insert to be used on both faces, providing two cutting edges per index. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp yet stable cutting edge, PVD-coated carbide grade AH6225, and ISO compatibility to secure consistent performance when turning rostfreier Stahl; order the insert directly via Metav Werkzeuge or ask the consultants for tailored recommendations. DNMG150604 AH6225 indexable turning insert — Tungaloy, PVD-coated carbide, 0.4 mm radius The DNMG150604 AH6225 is an ISO‑standard rhombic indexable insert designed for external and internal turning, optimised for mid‑range machining of rostfreier Stahl. PVD-coated carbide AH6225 Sharp and stable cutting edge Double-sided chipbreaker, rhombic form ISO compatibility for standard holders Consistent cutting performance for rostfreier Stahl and similar alloys The combination of the AH6225 grade and PVD-coated carbide substrate delivers a sharp, wear-resistant cutting edge that supports stable chip control under variable conditions. The coating improves adhesion resistance and reduces flank wear, which in turn extends usable tool life and helps to maintain part quality over production runs. For turning operations on rostfreier Stahl the balanced edge geometry enables a reliable compromise between surface finish and tool robustness, reducing the frequency of insert changes and contributing to a smoother workflow. Versatility in turning applications and process guidance The rhombic geometry with a 0.4 mm corner radius and a double-sided chipbreaker offers a versatile solution for both external and internal turning tasks. The medium corner radius supports light to moderate depth of cut while the chipbreaker design promotes predictable chip formation; this makes the insert suitable for interrupted cuts and varying stability conditions. Selection of feeds and speeds should reflect the grade’s mid‑range focus: moderate cutting speeds with stable clamping yield the best balance of productivity and edge life. Technical specification and process windows can be adjusted according to workpiece rigidity and holder design. Secure mounting, ISO interchangeability and handling benefits ISO standardisation ensures that the insert fits a broad range of turning holders provided form, relief angle, tolerance class, fixation and thickness match. The cylindrical hole supports a positive clamping interface for repeatable seat location and easy indexing. With a plate thickness of 6.35 mm and rhombic form, the geometry provides sufficient support for stable machining while allowing multiple indexing positions. Clear identification by ISO designation simplifies inventory management and reduces downtime when changing inserts during production. For reliable mid‑range turning of rostfreier Stahl with proven Tungaloy tooling, request stock and delivery information from Metav Werkzeuge or consult our technical team via info@metav-werkzeuge.com or +49 2822 7131930 for application advice and availability. Technical data Article number: 6825653-Tungaloy Manufacturer SKU: TUN6825653 Manufacturer article number: 6825653 Model series: ISO-Drehwendeschneidplatten Core specifications Insert designation: DNMG150604 Grade / coating: AH6225, PVD-coated carbide Shape: rhombic (DNMG) Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 55° Design & features Double-sided chipbreaker Cylindrical hole for clamping ISO standard insert for turning Suitable for rostfreier Stahl machining Intended for external and internal turning FAQ What materials is this insert designed for? The DNMG150604 AH6225 insert is intended primarily for rostfreier Stahl and similar alloys; the AH6225 grade is formulated as a universal choice for stainless materials. How does the AH6225 coating improve performance? The PVD-coated AH6225 substrate on the DNMG150604 insert provides enhanced wear resistance and a sharper cutting edge, resulting in longer edge life and more consistent surface finish under varying conditions. Is the insert compatible with standard ISO turning holders? Yes. The ISO designation and rhombic form mean compatibility is determined by holder form, relief angle, tolerance class, fixation and plate thickness and the DNMG150604 matches common ISO turning seats. What advantages does the 0.4 mm corner radius offer? A 0.4 mm radius balances edge strength and surface quality, enabling moderate depths of cut while reducing the risk of chipping on unstable setups. How is the insert secured in the holder? The insert features a cylindrical hole for secure clamping and indexed positioning; proper tightening to the holder's torque specification ensures repeatable seating and safe operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
Benefit from a combination of sharp, wear-resistant cutting performance and broad compatibility: the PVD-coated AH6225 grade provides a stable cutting edge for stainless steel turning while the ISO DNMG geometry eases tool selection and indexing. Order the insert directly via Metav Werkzeuge or consult the team for machining advice. DNMG 150604 AH6225 Turning insert by Tungaloy — PVD-coated carbide, 55° rhombic The DNMG150604 AH6225 indexable turning insert is designed for external and internal turning of stainless steels, offering a sharp yet robust cutting edge for varied medium-duty operations. PVD-coated carbide grade AH6225 Optimised for stainless steel machining Double-sided chipbreaker for consistent chips Rhombic DNMG shape, 15 mm size Reliable cutting performance for stainless steels The insert’s PVD-coated carbide substrate (grade AH6225) combines surface hardness and thermal stability to reduce flank wear and resist built-up edge under changing cutting conditions. The coating reduces adhesion and improves heat resistance, which means the cutting edge remains sharper for longer and process stability is increased. For production environments where repeatability and consistent surface finish are essential, this geometry supports steady metal removal rates and fewer tool changes, contributing to predictable cycle times and lower unit costs. Geometry and dimensions that simplify setup and inventory The rhombic DNMG form with a nominal 55° cutting geometry and a 0.4 mm corner radius provides a balanced compromise between strength and edge acuity. The insert measures 15 mm across with a plate thickness of 6.35 mm and a 0° clearance angle, and it features a cylindrical hole for secure mounting. The double-sided chipbreaker enables indexing to refresh the cutting edge, improving utilisable tool life and reducing spare-part variety. Compatibility with holders is governed by form, clearance angle, tolerance class, fastening method, size and thickness, so selection of a matched ISO holder ensures correct seat and repeatable clamping. System integration and machining economy In practice the insert is used as part of an ISO tooling system comprising a suitable external holder or boring bar, a clamp or shim set and replacement screws. The insert’s universal grade and chip control allow a single grade to cover a wide range of stainless steels and mixed batches, reducing tooling complexity. When combined with stable machine setup and appropriate feeds and speeds, the result is improved process security and good surface quality. The insert’s design supports quick indexation, straightforward inventory management and consistent results across short and mid-length production runs. Contact Metav Werkzeuge today for application-specific recommendations on Tungaloy DNMG150604 AH6225 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947255 Manufacturer SKU: TUN6947255 SKU: 6947255-Tungaloy Model series: ISO-Drehwendeschneidplatten Core measurements Angle: 55° Corner radius: 0.4 mm Thickness: 6.35 mm Size: 15 mm Clearance angle: 0° Design & features Material: carbide Coating: PVD Grade: AH6225 Shape: rhombic (DNMG) Hole: cylindrical hole Chipbreaker: double-sided Application: turning Compatible with ISO holders (form, clearance, tolerance, fastening, size, thickness) FAQ Is this insert suitable for stainless steels? The DNMG150604 AH6225 insert from Tungaloy is formulated specifically for stainless steel applications; the AH6225 grade and PVD coating provide edge stability and good wear resistance during turning of rostfreier Stahl. How is the insert mounted in the holder? The insert uses a cylindrical hole and must be clamped in a compatible ISO external holder or boring bar; correct compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. What does double-sided chipbreaker mean for tool life? A double-sided chipbreaker allows the insert to be indexed to present fresh cutting edges on both faces, extending effective cutting life and reducing the frequency of replacements for the same Tungaloy insert. Which operations are typical for this geometry? The rhombic DNMG geometry with a 55° approach is suited to both external and internal turning tasks where a balance of edge sharpness and robustness is required; it is suitable for medium-duty machining and mixed-production environments. Are there special requirements for selecting feeds and speeds? Feeds and speeds should be chosen according to the machined stainless steel grade, toolholder rigidity and machine capability; the AH6225 grade is tolerant to varying conditions but benefits from consistent clamping and appropriate coolant or lubrication strategies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade and a double-sided chipbreaker for consistent mid-range machining of rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our specialists for application support. DNMG150604 AH6225 ISO turning insert, PVD-coated carbide — Tungaloy A DNMG150604 AH6225 rhombic ISO insert engineered for external and internal turning of rostfreier Stahl, offering a sharp yet stable cutting edge for variable machining conditions DNMG150604 ISO rhombic turning insert PVD-coated carbide AH6225 for rostfreier Stahl Double-sided chipbreaker, cylindrical hole 0.4 mm corner radius, 6.35 mm thickness Reliable performance on rostfreier Stahl with AH6225 The AH6225 grade is a PVD-coated carbide developed for universal application on rostfreier Stahl, combining a sharp cutting edge with edge stability for medium cutting parameters. This balance reduces the need for frequent edge changes and supports stable production runs. The coating improves wear resistance under fluctuating temperatures and varied cutting forces, which translates into fewer interruptions and a more predictable tool life for batch or continuous turning operations. Precise geometry for compatible clamping and repeatability The rhombic shape and ISO designation enable straightforward selection of matching toolholders; compatibility is determined by form, clearance angle, tolerance class, fixation, size and thickness. With a 55° included angle and a 0° relief angle, the geometry delivers repeatable contact and clamping behaviour. The 0.4 mm corner radius and 6.35 mm thickness ensure consistent engagement with workpiece surfaces while the cylindrical centre hole supports secure positioning and straightforward indexing on double-sided inserts. Optimised chip control and reduced downtime A double-sided chipbreaker design manages chip formation effectively during both external and internal turning, limiting uncontrolled chips and helping to maintain surface quality. In practice, this leads to smoother chip evacuation and less rework. The combination of chipbreaker geometry and the PVD-coated surface supports longer cutting periods between inspections, contributing to higher productivity and lower machining costs per component in manufacturing environments. Integration into production workflows and practical use As part of an ISO-compliant turning system, the insert works together with a matching external holder or boring bar, a shim or clamp set, and replacement screws. This modular approach facilitates fast tool changes and keeps setup times low. The insert is suited to job shops and production lines where rostfreier Stahl is a common material and where moderate to varied cutting conditions demand a balance of sharpness and edge security. For specific machining data and holder recommendations, technical consultation is available to ensure optimal process parameters. Contact Metav Werkzeuge for tailored advice on the DNMG150604 AH6225 insert or to request application-specific cutting data; Metav Werkzeuge can provide direct ordering and process support via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: 6947113 SKU: 6947113-Tungaloy Manufacturer SKU: TUN6947113 Model series: ISO-Drehwendeschneidplatten Material: Carbide Coating: PVD Facts Corner radius: 0.4 mm Plate thickness: 6.35 mm Plate size: 15 mm ISO designation: 150604 Insert form: Rhombic (DNMG) Included angle: 55° Relief angle: 0° Hole: with cylindrical hole Special features Universal grade for rostfreier Stahl Double-sided chipbreaker ISO-standard turning insert Sharp yet stable cutting edge for medium machining Compatible with standard ISO holders and shims Suitable for external and internal turning FAQ Which materials is this insert designed for? The AH6225 grade is formulated primarily for rostfreier Stahl; the DNMG150604 insert from Tungaloy is optimised to deliver a stable cutting edge and reliable wear behaviour under those conditions. What are the key geometry and mounting details to check? The insert has a rhombic form with a 55° included angle, 0° relief angle, a 0.4 mm corner radius and a thickness of 6.35 mm; compatibility depends on holder form, tolerance class, fixation and size. How does the PVD coating affect tool life and finish? The PVD-coated carbide surface on the AH6225 grade enhances wear resistance and thermal stability, supporting consistent tool life and improved surface quality during medium turning operations. Can this insert be used for both external and internal turning? Yes, the ISO DNMG150604 design is suitable for both external and internal turning applications when paired with the appropriate external holder or boring bar. What components are needed to build a complete turning setup? A complete system requires the insert, a matching external holder or boring bar, an underlay/clamp set and replacement screws to ensure secure clamping and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
The combination of a sharp, stable PVD‑coated carbide grade and an ISO‑standard rhombic form delivers consistent performance for turning stainless steels; the double‑sided chipbreaker and secure cylindrical hole ensure repeatable clamping and reduced changeover time. Order genuine inserts via Metav Werkzeuge or consult the technical team for application-specific advice. DNMG150604 AH6225 Tungaloy — PVD‑coated carbide turning insert for stainless steels The DNMG150604 AH6225 is an ISO‑standard rhombic turning insert, engineered for external and internal turning of stainless steels where a sharp yet stable cutting edge is required. PVD‑coated carbide AH6225 Optimised for stainless steels Double‑sided chipbreaker ISO DNMG150604 form Consistent cutting performance for mixed stainless‑steel work The DNMG150604 AH6225 grade combines a PVD‑coated surface with a robust carbide substrate to deliver a balance between edge sharpness and wear resistance. The coating reduces built‑up edge and increases abrasion resistance under moderate machining, which translates into longer tool life and more predictable cycle times. For shops producing rotating parts from stainless steels, this results in fewer interruptions for insert changes and steadier surface finish quality. Reliable chip control and secure clamping reduce downtime A double‑sided chipbreaker design provides controlled chip formation across a range of feeds and depths of cut, improving evacuation and machine uptime. The rhombic plate geometry, together with the cylindrical hole, ensures positive location in ISO‑compatible holders and easy indexing of the second cutting face. The combination of chip control and solid fixation helps prevent vibration, contributing directly to repeatable component tolerances and reduced scrap rates. Straightforward fitment and practical dimensions for workshop use Conformity to ISO form DNMG150604 simplifies inventory and holder compatibility: the plate measures 15 mm across the inscribed circle with a 6.35 mm thickness and a 0.4 mm corner radius, while the wedge geometry presents a 55° approach angle and a 0° relief angle. These measurable characteristics make selection transparent for purchasing and setup teams, and they allow predictable tool‑path programming. Indexable inserts of this type are easy to rotate and replace, supporting efficient line balancing and lower total machining cost. Application guidance and material scope Engineered as a universal choice for turning stainless steels, the insert performs well in interrupted cuts and variable conditions often encountered in production environments. The grade supports mid‑range cutting parameters; when combined with the correct holder rigidity and coolant strategy, it is suited to both external and internal turning tasks. The PVD layer favours reduced friction and stable edge integrity, benefitting surface finish and dimensional accuracy across batches. For precision and dependable results, request the genuine Tungaloy DNMG150604 AH6225 inserts through Metav Werkzeuge — technical advice and availability checks are available at info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical data Article number: 6890528 SKU: 6890528-Tungaloy Manufacturer SKU: TUN6890528 Model series: ISO-Drehwendeschneidplatten Product designation: DNMG150604 AH6225 Facts Corner radius: 0.4 mm Wedge angle: 55° Relief angle: 0° Thickness: 6.35 mm Size: 15 mm Manufacturer article number: 6890528 Special features Material: carbide Coating: PVD Chipbreaker: double‑sided Shape: rhombic Hole: with cylindrical hole Application: turning Suitable for: stainless steels FAQ Which materials are best suited to this insert? The DNMG150604 AH6225 insert is optimised for stainless steels, offering a balance of sharpness and wear resistance for typical turning operations. Is the insert indexable and reversible? Yes, the plate is double‑sided with two usable cutting edges per side, allowing indexing to a fresh edge and extending service life. What are the key dimensions to check for holder compatibility? Check the ISO form DNMG150604, 15 mm size, 6.35 mm thickness and 0.4 mm corner radius to ensure fit in ISO‑compatible holders. How does the PVD coating affect performance? The PVD surface reduces friction and improves abrasion resistance, which helps maintain a stable cutting edge and improves consistency on stainless steel components. Can this insert be used for interrupted cuts? The combination of a robust carbide substrate and a stable geometry makes this insert suitable for interrupted turning where a balance of toughness and edge retention is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
Benefit from a robust combination of PVD-coated AH6225 carbide and a 55° rhombic geometry that delivers stable cutting, consistent surface finish and reduced tool changes; order the DNMG150604 AH6225 indexable turning insert directly via Metav Werkzeuge or consult our advisors for application support. DNMG150604 AH6225 – Tungaloy indexable turning insert for turning, rhombic 55° The DNMG150604 AH6225 is an ISO-standard rhombic indexable insert designed for external and internal turning, optimised for machining rostfreier Stahl with a sharp yet stable cutting edge. PVD-coated carbide AH6225 for rostfreier Stahl ISO rhombic DNMG geometry, 55° cutting angle Double-sided chipbreaker, cylindrical hole 0.4 mm corner radius, 6.35 mm thickness Consistent cutting performance and surface quality The PVD-coated AH6225 grade pairs a sharp edge with controlled toughness to handle the demands of medium machining. This composition is particularly suited to rostfreier Stahl, where workhardening and built-up edge can compromise results; the coating enhances wear resistance and thermal stability, so a consistent surface finish is maintained across varying cutting conditions. Compatibility with standard ISO holders ensures the insert is integrated into established turning cells without special fixtures. Rigidity, clamping reliability and process repeatability The rhombic DNMG form with a 55° cutting angle gives a balance between cutting force distribution and access to contours in external and internal turning. The insert’s cylindrical hole and double-sided chipbreaker are designed for secure clamping and reliable chip control, reducing vibration and improving repeatability. With a 0.4 mm corner radius and 6.35 mm plate thickness, the geometry increases edge stability and stiffness, which benefits cycle time and dimensional consistency on medium-duty operations. Reduced tooling complexity and predictable production Selecting a universal grade such as AH6225 helps to streamline tool inventories and simplifies grade selection for rostfreier Stahl components. The insert’s versatility in diverse conditions reduces the need for frequent grade changes, contributing to lower downtime and simpler process planning. Where process security and consistent output are priorities, this insert supports efficiency by combining wear resistance, chip control and the ISO compatibility expected in modern turning operations. Contact Metav Werkzeuge today for application recommendations on Tungaloy AH6225 DNMG inserts and tailored advice to match machining parameters and holder compatibility Technical Data Manufacturer article number: 6825248 SKU: 6825248-Tungaloy Manufacturer SKU: TUN6825248 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Cutting angle: 55° Corner radius: 0.4 mm Thickness: 6.35 mm Size (inscribed circle): 15 mm Relief angle: 0° Special features ISO designation DNMG150604 PVD-coated carbide grade AH6225 Rhombic plate form Double-sided chipbreaker Cylindrical hole (with hole) Designed for external and internal turning Compatible with standard ISO holders Application: Drehen, suitable for rostfreier Stahl FAQ What materials is the insert suitable for? The AH6225 grade is formulated for rostfreier Stahl and is intended to provide a sharp, stable cutting edge for medium machining tasks. How does the DNMG150604 geometry affect cutting forces? The rhombic 55° geometry distributes cutting load for improved access and stability in external and internal turning; the design supports repeatable results when fitted in compatible ISO holders. Is the insert reversible or single-edge? This indexable plate is double-sided with a cylindrical hole and double-sided chipbreaker, allowing the use of both cutting edges before replacement. What measures support secure clamping of the insert? Secure clamping is achieved via the cylindrical hole and standard fastening interfaces; the plate thickness of 6.35 mm contributes to rigidity under load. Which replacement or spare parts are recommended for a complete system? A matched holder or boring bar, underlay/clamp set and replacement screws are typically required to assemble a complete turning system compatible with this insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
The combination of a PVD‑coated carbide grade optimised for stainless steel, a stable 55° rhombic geometry and a double‑sided chipbreaker delivers consistent medium‑duty turning performance and reliable edge life; order the DNMG150604 AH6225 Tungaloy insert directly via Metav Werkzeuge or consult the technical advisers for application-specific pairing. DNMG150604 AH6225 turning insert by Tungaloy — PVD‑coated carbide, rhombic 55° A DNMG150604 AH6225 ISO‑standard turning insert for external and internal turning, engineered for stable cutting in stainless steels with a sharp, durable cutting edge. PVD‑coated carbide grade AH6225 Rhombic 55° geometry, corner radius 0.4 mm Double‑sided with cylindrical mounting hole 6.35 mm thick, suitable for ISO turning systems Consistent cutting performance for stainless steels The PVD‑coated carbide grade AH6225 is formulated as a universal option for stainless steel machining, offering a sharp yet stable cutting edge under varying conditions. The coating improves resistance to adhesion and heat, which helps to maintain edge integrity during medium‑duty operations. This results in reduced flank wear, more consistent component finish and fewer unscheduled indexings, making the insert well suited where a balance between tool life and surface quality is required. Secure clamping and straightforward tool matching With a rhombic 55° geometry, a cylindrical mounting hole and a plate thickness of 6.35 mm, the insert gives clear mechanical references for holder selection and set‑up. Compatibility with a holder is determined by form, relief angle, tolerance class, fastening and size; using the correct combination reduces run‑out and improves repeatability. The double‑sided chipbreaker extends usable life by permitting a flange‑to‑flange index, while the defined corner radius 0.4 mm helps control cutting forces and surface finish when turning diameters or profiling features. System approach for productivity and predictable costs The ISO‑series design enables a system build comprising the insert, a matched external holder or boring bar, a shim/clamp set, and replacement screws. This standardised assembly supports fast changeovers and easier stock management. Selecting the appropriate chipbreaker and the AH6225 grade for the material and machine stability leads to fewer tool changes, more stable cycle times and an improved cost‑per‑part ratio, particularly in batch production and mixed‑batch stainless‑steel work. For ordering or application advice on the DNMG150604 AH6225 Tungaloy insert, contact Metav Werkzeuge for technical guidance and prompt delivery coordination via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6825913 Manufacturer SKU: TUN6825913 SKU: 6825913-Tungaloy Designation: DNMG150604 AH6225 Data Geometry angle: 55° Corner radius: 0.4 mm Plate size: 15 mm Plate thickness: 6.35 mm Relief angle: 0° Special features PVD‑coated carbide (AH6225) Double‑sided chipbreaker Rhombic plate form, with cylindrical hole ISO‑standard turning insert for external and internal turning Universal grade optimised for stainless steel System components: insert, holder or boring bar, shim/clamp set, spare screws FAQ What materials is this insert designed for? The DNMG150604 AH6225 insert is specified as a universal grade for stainless steel machining and performs well in medium‑duty turning operations. How does the PVD coating benefit performance? The PVD coating on the AH6225 grade increases wear and heat resistance, helping to maintain a stable cutting edge and consistent surface finish during turning. Is the insert reversible and how does that affect productivity? Yes, the plate is double‑sided; reversing the insert effectively doubles the usable cutting edges, extending tool life and reducing downtime for replacements. What holder features must match the insert? Compatibility depends on form, relief (frewinkel), tolerance class, fastening, size and thickness; selecting a holder that matches these parameters ensures secure clamping and accurate repeatability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide and double-sided chipbreaker to maintain consistent performance when turning stainless steels; the rhombic 55° geometry and 0° relief support predictable chip formation and secure clamping. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DNMG150604 AH6225 ISO turning insert for external and internal turning — Tungaloy DNMG150604 AH6225 is a rhombic ISO turning insert intended for general external and internal turning applications, optimised for stainless-steel machining with a sharp, stable cutting edge PVD-coated carbide for stainless steels Double-sided chipbreaker for controlled chips Rhombic 55° geometry, 15 mm size Cylindrical hole and 6.35 mm plate thickness Consistent performance for stainless-steel turning The DNMG150604 AH6225 insert combines a PVD-coated carbide grade with a geometry that promotes a stable cutting edge, making it well suited to medium turning operations and varying conditions. The double-sided chipbreaker reduces the risk of irregular chip formation, which in turn lowers the likelihood of built-up edge and surface defects. For production environments this translates into fewer interruptions and more predictable cycle times; the coating improves wear resistance so that the tool life remains economical under typical stainless-steel cutting speeds. Seamless system integration and secure clamping Compatibility with the toolholder depends on form, relief angle, tolerance class, fastening, size and thickness. The rhombic plate includes a cylindrical hole designed for standard clamping systems and a 0° relief, which demands precise seating but rewards with reduced vibration and improved repeatability. Selecting a matched holder, underlay/clamp set and replacement screws completes the system and ensures the insert delivers its rated stability. Explaining technical terms: a 0° relief means minimal clearance behind the cutting edge, which can increase stability but requires correct set-up to avoid rubbing. Practical advantages in mixed and interrupted cuts The AH6225 grade is formulated as a universal solution for stainless steel, offering a balance between sharpness and edge robustness. That makes this insert a good choice when workpieces present variable conditions or occasional interruptions. The 15 mm size and 0.4 mm corner radius allow fine control over surface finish while retaining the capacity for moderate material removal. Where cycle reliability and surface quality matter, this combination reduces rework and supports consistent downstream processes. Guidance for selection and application When choosing an insert, match the chipbreaker and grade to the material and machining stability: a stable set-up permits more aggressive parameters and longer tool life, while lighter clamping calls for gentler cutting data. The insert functions as part of a system: a suitable external holder or boring bar, correct underlay and the spare screws should be part of the procurement plan. For milling of parameters and recommended cutting data, consult the toolholder documentation or request tailored machining advice. For specification support or tailored recommendations based on Tungaloy quality, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 and request application guidance for DNMG150604 AH6225 Technical data Article number: 6825912 SKU: 6825912-Tungaloy Manufacturer SKU: TUN6825912 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts ISO designation: DNMG150604 Size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.4 mm Relief angle: 0° Main angle: 55° Special features Coating: AH6225 (PVD) Chipbreaker: double-sided Plate form: rhombic Hole: with cylindrical hole Typical application: external and internal turning Designed for: stainless-steel machining System requirements: matching holder, underlay/clamp set, replacement screws FAQ What materials is this insert best suited for? The DNMG150604 AH6225 insert is developed primarily for stainless steel machining and performs well in medium turning operations under changing conditions. How does the AH6225 coating affect tool life? The PVD-coated AH6225 grade enhances wear resistance and edge stability, resulting in improved tool life and consistent cutting behaviour compared with uncoated grades. Is the insert compatible with standard ISO holders? Yes, the DNMG150604 conforms to ISO geometry; compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness, so use a compatible holder and clamping kit for optimal results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade engineered for stainless steel, a 55° rhombic geometry for versatile turning, and a stable cutting edge that supports consistent surface finish and tool life; order the DNMG150604 AH6225 indexable insert directly via Metav Werkzeuge or consult the team for application advice. DNMG150604 AH6225 turning indexable insert – PVD-coated carbide, 55° rhombic (Tungaloy) DNMG150604 AH6225 is an ISO-form turning insert designed for external and internal turning where reliable chip control and repeatable edge stability are required PVD-coated carbide, universal grade AH6225 55° rhombic shape for versatile turning Double-sided chipbreaker for economical indexing 6.35 mm thickness, cylindrical hole for secure clamping Consistent cutting performance for stainless steel and variable conditions The insert is supplied in a PVD-coated carbide grade (AH6225) that combines a sharp but stable cutting edge for medium machining. The coating reduces flank wear and improves resistance to built-up edge when machining stainless steel, which in practice leads to longer tool life and more consistent part quality. In technical terms, the PVD layer increases hardness and heat resistance at the cutting edge; for users this means fewer tool changes and steadier surface finishes under mixed operating conditions. ISO compatibility and secure mounting to reduce setup time Built to the ISO model series for turning indexable inserts, the rhombic 55° geometry and the cylindrical hole ensure compatibility with a wide range of ISO holders. Compatibility is determined by form, free angle, tolerance class, fastening, size and thickness, so the insert fits standard clamping systems and contributes to rapid tool changes. The consistent geometry and the defined 0° clearance reduce setup iteration and support repetitive production runs with predictable cutting parameters. Efficient workshop handling through double-sided design and precise edge radius The double-sided chipbreaker provides two usable cutting edges per side, enabling economical indexing and lowering cost per edge. With a corner radius of 0.4 mm and a plate thickness of 6.35 mm, the geometry balances edge strength and finishing capability, suitable for medium cuts and variable feed rates. The integrated chipbreaker controls swarf flow during turning operations and helps maintain stable cutting forces, which supports calmer machining and fewer interruptions in a production environment. Proven material choice and manufacturer reliability for steady productivity Manufactured from high-quality carbide and finished in the AH6225 grade, the insert is aimed at providing process stability across a broad range of stainless steel applications. The combination of substrate and PVD coating yields a tool that addresses wear resistance and edge retention while keeping a predictable performance profile. For operations seeking dependable repeatability and clear technical traceability, the Tungaloy solution delivers the expected industrial robustness and optimised chip formation. Contact Metav Werkzeuge for tailored application advice and to order the DNMG150604 AH6225 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and cutting data Technical Data Article number: 6947090 SKU: 6947090-Tungaloy Manufacturer SKU: TUN6947090 Name: DNMG150604 AH6225 Tungaloy indexable insert Model series: ISO turning indexable inserts Application: Turning Manufacturer: Tungaloy Core specifications Geometry angle: 55° Plate size: 15 mm Corner radius: 0.4 mm Plate thickness: 6.35 mm Clearance angle: 0° Hole: with cylindrical hole Materials & Special features Material: carbide Coating / grade: PVD-coated, AH6225 Chipbreaker: double-sided Shape: rhombic Sidedness: double-sided, indexable Compatibility: ISO insert – fit determined by form, free angle, tolerance class, fastening, size and thickness FAQ Is this insert suitable for stainless steel? Yes. The AH6225 grade and PVD coating are designed as a universal solution for stainless steel, offering a balance of edge sharpness and wear resistance for medium turning tasks. What are the main geometric details of the insert? The DNMG150604 AH6225 insert features a 55° rhombic shape, 15 mm plate size, 6.35 mm thickness and a 0.4 mm corner radius; the design supports stable turning and predictable surface quality. Can the insert be indexed to use multiple cutting edges? Yes. The component is double-sided with a double-sided chipbreaker, allowing economical indexing and multiple usable edges per insert. Which holders are compatible with this ISO insert? Compatibility depends on holder form, free angle, tolerance class, fastening, size and thickness; the insert conforms to ISO dimensions and fits standard ISO turning holders when those parameters match. What is the coating and how does it help in practice? The insert uses a PVD-coated carbide substrate in grade AH6225; the coating improves hardness at the cutting edge and resistance to adhesive wear, helping to maintain edge life and reduce frequency of changes during stainless steel machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
Taking advantage of the PVD‑coated AH6225 grade and the rhombic DNMG150604 geometry yields a sharp yet robust cutting edge optimised for medium turning operations; combined with ISO compatibility and a cylindrical mounting hole this insert supports stable, repeatable tool changes and sustained production. Order or enquire via Metav Werkzeuge for tailored advice and immediate availability. DNMG150604 AH6225 Tungaloy indexable insert — PVD‑coated carbide for turning DNMG150604 AH6225 is an ISO‑standard rhombic turning insert engineered for external and internal turning, especially on rostfreier Stahl and similar stainless alloys ISO‑normed rhombic insert DNMG150604 PVD‑coated carbide AH6225 for rostfreier Stahl Sharp yet stable cutting edge for medium cuts Cylindrical hole, 0° clearance, 55° wedge angle Consistent medium‑duty turning performance that reduces rework The PVD‑coated AH6225 grade combines a hard, wear‑resistant surface with a substrate of carbide to provide a dependable lifecycle under interrupted and continuous cuts. This results in improved edge stability and predictable flank wear during medium machining, which supports consistent part tolerances and fewer tool changes. The coating enhances resistance to built‑up edge when machining rostfreier Stahl, while the grade’s balance of toughness and hardness keeps the cutting edge sharp without becoming brittle. This technical balance translates into measurable productivity gains on batch and single‑piece turning tasks. ISO compatibility and geometry designed for reliable toolholder clamping The insert follows the ISO designation DNMG150604, ensuring broad compatibility with ISO‑compliant external holders and boring bars; the rhombic form and the 55° wedge angle deliver a versatile approach angle for a range of turning operations. The part features a cylindrical hole for secure fastening and a 0° clearance that suits neutral tool settings. The 0.4 mm corner radius offers a compromise between edge strength and surface finish, while the double‑sided chipbreaker allows economical use of both cutting edges. Together these elements reduce downtime during insert indexing and provide predictable seating and repeatability in automated tool turrets. Broad material range and chip control for efficient cycle times Although optimised for rostfreier Stahl, the insert’s geometry and coating support varied materials under the right cutting conditions; the PVD coating helps control adhesion and thermal softening at the cutting zone. The double‑sided chipbreaker promotes controlled chip formation, lowering the risk of built‑up edge and aiding coolant access in suboptimal conditions. Selecting the AH6225 grade and appropriate cutting data leads to longer edge life and fewer interruptions, which is particularly valuable in mixed‑batch production where changeover speed and reproducibility matter. For operations seeking steady part quality and predictable tool life, this combination reduces scrap and supports stable process windows. Contact Metav Werkzeuge for application advice, stock status and matching toolholder recommendations for the Tungaloy DNMG150604 AH6225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6950972 Manufacturer SKU: TUN6950972 SKU: 6950972-Tungaloy Model series: ISO‑Drehwendeschneidplatten ISO designation: DNMG150604 Manufacturer: Tungaloy Facts Material: carbide Coating: PVD Grade: AH6225 Insert size: 15 Thickness: 6.35 mm Corner radius: 0.4 mm Wedge/lead angle: 55° Clearance angle: 0° Special features Shape: rhombic Hole: with hole Hole style: cylindrical hole Chipbreaker: double‑sided Typical application: turning Compatible with ISO‑standard holders FAQ What materials is this insert best suited for? The DNMG150604 AH6225 insert is formulated for rostfreier Stahl (stainless alloys) and performs well in medium turning applications where a compromise between sharpness and edge stability is required. How is the insert mounted and secured in a holder? Mounting uses the cylindrical hole and ISO‑standard geometry; the DNMG150604 form and the specified thickness ensure proper seating and clamping in compatible external holders and boring bars. Can both sides of the insert be used? Yes, the insert features a double‑sided chipbreaker, allowing both cutting edges to be indexed for economical use and extended edge life. What does the AH6225 grade offer compared with standard uncoated carbide? The AH6225 grade combines a PVD‑coating with a carbide substrate to improve wear resistance and reduce adhesion when machining rostfreier Stahl, resulting in longer life and more consistent cutting performance. Is the geometry suitable for finishing or roughing passes? With a 0.4 mm corner radius and a 55° wedge angle, the geometry suits medium cuts and semi‑finishing; adjustments to feed and depth will define whether it is used closer to roughing or finishing regimes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
Combine the PVD-coated AH6225 grade with the 55° rhombic geometry and a 0.4 mm corner radius for reliable, economical medium turning of stainless steels; order the insert via Metav Werkzeuge or consult the technical team for application-specific guidance. DNMG150604 AH6225 indexable turning insert (Tungaloy) — PVD-coated carbide, 55° rhombic A DNMG150604 AH6225 indexable insert for external and internal turning, engineered for consistent performance in stainless steel machining and medium-cutting conditions PVD-coated AH6225 for stainless steels 55° rhombic shape for versatile turning 0.4 mm corner radius for precise finishes Double-sided chipbreaker, cylindrical hole Consistent, adaptable performance in stainless steel turning The AH6225 cutting grade is a PVD-coated carbide formulated as a universal solution for stainless steels, delivering a balance of a sharp and stable cutting edge suited to medium machining and variable conditions. This combination reduces unexpected tool wear and improves process repeatability, which translates into lower unit costs over production runs. The coating enhances oxidation resistance at elevated temperatures, while the substrate provides toughness against chipping; together they support continuous operation under typical turning feeds and speeds. Geometry tuned for surface quality and repeatability The 55° rhombic form and 0° relief angle provide a robust geometry for both external and internal turning, helping to maintain consistent part profiles and reduce vibration. The 0.4 mm corner radius influences both strength at the cutting edge and the achievable surface finish: a modest radius increases edge stability while supporting fine finish capability in interrupted and continuous cuts. As a double-sided indexable insert, the part count per insert is effectively doubled, improving economy without sacrificing dimensional repeatability. Seamless integration with ISO tooling and reliable chip control Compatibility with toolholders depends on form, relief angle, tolerance class, fastening, size and thickness; this insert conforms to ISO indexable insert standards to ensure straightforward selection of matching holders and clamping sets. The double-sided chipbreaker and cylindrical hole aid consistent chip formation and secure fastening in the seat, reducing rework due to poor chip evacuation. With a 6.35 mm plate thickness, the insert offers added stability for moderate depths of cut; application-specific cutting parameters and holder selection can be provided on request to optimise cycle times and surface integrity. For application advice or to procure the Tungaloy DNMG150604 AH6225 insert, contact Metav Werkzeuge for technical consultation and fast processing — eMail: info@metav-werkzeuge.com / Phone: +49 2822 7131930 Technical data Article number: 6947230 Manufacturer SKU: TUN6947230 SKU: 6947230-Tungaloy Brand: Tungaloy Model series: ISO indexable turning inserts Facts Insert size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.4 mm Shape angle: 55° Relief angle: 0° Special features Material: PVD-coated carbide (AH6225) Plate form: rhombic Chipbreaker: double-sided Hole: cylindrical, with hole Typical application: external and internal turning; stainless steels FAQ What materials is this insert designed for? The DNMG150604 AH6225 insert uses a PVD-coated carbide grade optimised for stainless steels, providing stable cutting performance in medium machining operations. Which holders and clamps are compatible with this insert? Compatibility follows ISO indexable insert standards; suitable holders are selected by matching form, relief angle, tolerance class, fastening method, size and thickness to the DNMG150604 AH6225 geometry. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius increases edge strength and contributes to a consistent surface finish, offering a compromise between robustness and fine finishing capability in typical turning applications. Is the insert reversible and does it aid economy? Yes — the insert is double-sided, allowing indexation to a fresh cutting edge and effectively doubling the service life per part compared with single-sided alternatives. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6225 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade (AH6225) and the 0.4 mm corner radius delivers precise finishes and reliable chip control for stainless-steel turning; ISO conformity ensures simple holder interchange. Order the DNMG 150604 AH6225 insert directly via Metav Werkzeuge or contact our consultants for application advice. DNMG 150604 AH6225 Tungaloy indexable insert for Turning The DNMG150604 AH6225 is an ISO-standard, rhombic indexable insert for external and internal turning, engineered for medium-depth cuts and variable conditions with a focus on stainless steels. ISO rhombic insert, 15 mm size PVD-coated carbide AH6225 grade 0.4 mm corner radius for precise cuts Double-sided chipbreaker, 0° clearance Consistent ISO compatibility for faster setup and fewer errors The insert follows ISO-standard dimensions and tolerances, so holder compatibility is determined by form, clearance angle, fastening and thickness rather than guesswork. This standardisation reduces setup time and minimises incorrect mounting. The rhombic geometry with a 55° relief angle provides a stable seating in common external and internal holders, while the 6.35 mm thickness improves stiffness and reduces chatter during medium cutting depths. The precise shape and tolerance class mean that tool change routines can be standardised across different machines, supporting predictable cycle times and repeatable part quality. Reliable cutting edge and chip control for stainless-steel machining Manufactured in a PVD-coated carbide grade AH6225, the insert combines a sharp, wear-resistant cutting edge with sufficient toughness for variable conditions. The double-sided chipbreaker is designed to manage chip formation and evacuation when turning stainless steels, reducing built-up edge and the need for secondary operations. The corner radius 0.4 mm balances strength and surface finish, enabling cleaner profiles and improved dimensional stability. These features together lower the frequency of tool changes and contribute to a more efficient production flow, particularly in mixed-batch or job-shop environments. Practical mounting and versatile application for workshop use The insert is supplied with a cylindrical hole, enabling secure clamping with common screws and underlay sets. Its indexable, double-sided design offers economic use of cutting material and predictable replacement intervals. Suited for both external and internal turning, the grade is chosen to perform under changing conditions—when stability and a consistent cutting edge are required. For teams seeking support on holder selection or cutting data, Metav Werkzeuge provides technical guidance to match the insert with the correct outer holder and machining parameters, helping to avoid overcutting or poor surface quality. Contact Metav Werkzeuge for tailored recommendations on the Tungaloy DNMG 150604 AH6225 PVD-coated insert and ensure optimal turning performance – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947137 Manufacturer SKU: TUN6947137 SKU: 6947137-Tungaloy Manufacturer: Tungaloy Facts Size: 15 mm Thickness: 6.35 mm Relief/lead angle: 55° Clearance angle: 0° Corner radius: 0.4 mm Special features Rhombic insert form (DNMG) PVD-coated cemented carbide (AH6225) Double-sided chipbreaker With cylindrical hole ISO indexable turning insert series Designed for stainless steels Suitable for external and internal turning FAQ What materials is this insert suitable for? The DNMG150604 AH6225 insert is specified for machining stainless steels and is optimised for medium-depth turning where a sharp yet stable cutting edge is required. How does the AH6225 grade improve process reliability? The AH6225 PVD-coated carbide offers a combination of wear resistance and edge stability, which improves repeatable performance under varying cutting conditions for the DNMG150604 insert. Is the insert reversible and how does that affect cost-efficiency? Yes, the insert is double-sided and indexable; both faces can be used, reducing tooling costs and downtime by extending the usable life of each insert. What role does the 0.4 mm corner radius play in part quality? A 0.4 mm corner radius provides a compromise between edge strength and surface finish, helping to produce consistent profiles while resisting chipping in interrupted or variable cuts. Can this insert be mounted in standard holders? The ISO dimensions and the cylindrical hole allow secure mounting in compatible holders that accept DNMG-style inserts; ensure matching form, fastening and tolerance class for correct fit. Which chipbreaker should be selected for stainless-steel turning? The supplied double-sided chipbreaker is suitable for most stainless-steel applications; choose a chipbreaker and grade combination based on workpiece stability and the required surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6235 Wendeplatten - Tungaloy
DNMG150604 AH6235 combines a PVD-coated carbide grade with a robust double-sided chipbreaker to deliver stable cutting in stainless steel and interrupted cuts; benefit from consistent edge security and simple integration into ISO holder systems. Order the DNMG150604 AH6235 directly via Metav Werkzeuge or consult the Metav team for selection support. DNMG 150604 AH6235 indexable insert for turning — Tungaloy A DNMG150604 AH6235 indexable turning insert engineered for external and internal turning, optimised for stainless steels and applications with increased risk of edge breakouts. PVD-coated carbide grade AH6235 Suitable for stainless steel machining Double-sided chipbreaker ISO rhombic DNMG 55° geometry Consistent performance when machining stainless steels The PVD-coated carbide AH6235 offers a tougher substrate and coating combination that reduces edge chipping during interrupted cuts and heavy engagement with stainless steels. This grade is formulated to preserve the cutting edge under variable contact conditions, enabling longer periods between indexings and fewer unplanned tool changes. The result is a measurable improvement in process stability and part-to-part consistency, particularly where surface integrity and dimensional control are critical. Geometry that supports secure cutting and reliable chip control The rhombic ISO DNMG form with a nominal 55° angle and a corner radius 0.4 mm provides a balance between strength and versatility. The double-sided chipbreaker is designed to generate predictable chip shapes for a range of feed rates, reducing the chance of recutting and improving surface finish. The insert’s zero-degree clearance and cylindrical hole fastening demand correct holder matching — compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness — ensuring repeatable clamping and alignment in production tooling systems. Shop-floor advantages and integration into machining systems As a standardised ISO turning insert, this design fits established holder systems and supports quick service routines, helping to reduce downtime and simplify inventory management. The 6.35 mm plate thickness and rhombic profile allow economical part programming choices for both external and internal turning, while the PVD-coated surface enhances wear resistance under moderate to elevated temperatures. These technical characteristics contribute to cost-effective machining through longer tool life and fewer quality deviations on serial production runs. For tailored application advice or to secure stock of the DNMG150604 AH6235 insert from Tungaloy, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical guidance and order support. Technical data Article number: 6886666 SKU: 6886666-Tungaloy Manufacturer article number: 6886666 Numbers / Core technical data ISO designation: 150604 Plate size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Clearance angle: 0° Main angle: 55° Designs / Special features Material: carbide Coating: PVD Grade: AH6235 Plate form: rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Typical application: external and internal turning, interrupted cuts Compatible system: ISO turning insert with matched holders and clamping sets FAQ What materials is this insert best suited for? The DNMG150604 AH6235 is optimised for stainless steels and performs well in interrupted cutting where edge toughness is required. Can the insert be used for both external and internal turning? Yes, the ISO rhombic form and thickness make this insert suitable for both external and internal turning applications. How does the AH6235 grade affect tool life? The PVD-coated AH6235 grade provides enhanced edge toughness and wear resistance, which helps extend service life under variable cutting conditions. Is a special holder required to use this insert? Standard ISO DNMG-compatible holders are required; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. What benefits does the double-sided chipbreaker provide? The double-sided chipbreaker promotes predictable chip formation and improved surface finish, reducing the risk of recutting and burr formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide toughness, a 0.4 mm corner radius and a 55° lead angle for dependable performance in interrupted cuts and on stainless steels; order the insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150604 AH6235 turning insert — PVD-coated carbide, 55° lead angle (Tungaloy) DNMG150604 AH6235 is an ISO rhombic turning insert designed for external and internal turning, optimised for interrupted cuts and applications with increased risk of edge breakout. ISO rhombic form for stable cutting PVD-coated carbide for improved toughness 0.4 mm corner radius for precision Double-sided chipbreaker, with cylindrical hole Consistent cutting in demanding stainless-steel operations The PVD-coated carbide grade AH6235 is formulated for enhanced toughness and resistance to chipping during interrupted cuts, which makes it particularly suitable for machining stainless steels. The coating adds wear resistance while the substrate maintains edge robustness, so the indexable insert delivers a balance between tool life and fracture resistance. For production environments where short tool life from edge breakouts is a recurring issue, the combination of coating and substrate reduces unscheduled tool changes and supports steady cycle times. Geometry that improves chip control and repeatability The rhombic form and 55° lead angle promote reliable engagement and stable cutting forces, while the double-sided chipbreaker assists in creating predictable chip shapes for efficient evacuation. The corner radius 0.4 mm provides a defined cutting edge for consistent dimensional control and surface finish on turned components. The central cylindrical hole enables secure clamping in compatible ISO holders; the insert’s two usable cutting edges per side increase economy without sacrificing repeatability. ISO compatibility and practical system benefits As an ISO turning insert, the component fits standard holders when shape, clearance angle, tolerance class, fastening and thickness match the toolholder specification. The insert’s 6.35 mm thickness and 15 mm size are typical dimensions in many turning tool systems, simplifying stockkeeping and replacement. Specifying the correct chipbreaker and the AH6235 grade for applications on stainless steels or when machining with interrupted cuts results in fewer rejects, lower tool-change frequency and improved process stability—advantages that support predictable production planning. For application advice, availability or to secure DNMG150604 AH6235 Tungaloy inserts through Metav Werkzeuge, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or call +49 2822 7131930 for fast technical guidance and order processing Technical Data Article number: 6892181 SKU: 6892181-Tungaloy Manufacturer SKU: TUN6892181 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Description: DNMG150604 AH6235 Tungaloy turning insert Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Lead angle: 55° Free angle: 0° ISO code: 150604 Special features Material: carbide Grade/coating: AH6235 (PVD-coated) Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning, external and internal turning Suitable for: stainless steels, interrupted cuts and high breakout risk FAQ What materials is this insert suitable for? The DNMG150604 AH6235 insert, with its PVD-coated carbide grade AH6235, is specified for stainless steels and performs well in interrupted cuts and applications with elevated breakout risk. How does the AH6235 grade affect tool life? AH6235 provides enhanced toughness and a wear-resistant coating; the combination extends effective service life of the DNMG150604 AH6235 insert under fluctuating cutting conditions compared with uncoated grades. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and thickness; the DNMG150604 conforms to ISO dimensions and fits matching ISO toolholders for rhombic DNMG inserts. What cutting edge geometry should be chosen for finish or roughing? The 0.4 mm corner radius on this insert favours a balance between dimensional accuracy and edge strength; for heavier roughing or higher feed rates, a larger radius or different chipbreaker would be considered, whereas finer finishes may use smaller radii where available. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6235 Wendeplatten - Tungaloy
The combination of PVD-coated carbide toughness, double-sided chipbreaker geometry and ISO compatibility ensures reliable performance in demanding turning operations; benefit from reduced breakage and consistent chip flow. Order directly via Metav Werkzeuge or contact the technical team for application advice. DNMG 150604 AH6235 turning indexable insert by Tungaloy — PVD-coated carbide, 55° lead DNMG150604 AH6235 is a rhombic ISO indexable insert designed for general turning and interrupted cuts, offering enhanced edge integrity for rostfreier Stahl applications PVD-coated carbide grade AH6235 Suitable for rostfreier Stahl and interrupted cuts Double-sided chipbreaker for consistent chips ISO rhombic form, 15 mm size, 6.35 mm thickness Higher edge security for demanding rostfreier Stahl turning This insert delivers a measurable improvement in process stability thanks to the PVD-coated surface and a tougher substrate. The combination of coating and substrate composition increases resistance to thermal and mechanical shock, which is particularly important when machining rostfreier Stahl or when encountering interrupted cuts. The insert’s edge design reduces the risk of chipping, leading to longer usable edge life and fewer tool changes, which directly supports higher machine uptime and lower overall production cost. Precise fit and straightforward ISO compatibility for fast changeovers Manufactured to ISO dimensions, the insert matches standard toolholders when form, clearance angle, tolerance class, fastening, size and thickness are observed. The rhombic geometry and the presence of a cylindrical hole allow secure clamping and straightforward indexing. With a lead angle of 55°, and a thickness of 6.35 mm, the component offers a balance between rigidity and accessibility for external and internal turning. Clear ISO conformity simplifies inventory management and reduces the need for custom holders. Predictable chip control and reduced rework by design The double-sided chipbreaker promotes uniform chip formation across a range of feeds and cutting conditions, improving surface finish and reducing the likelihood of built-up edge on the tool. The AH6235 grade provides enhanced toughness for applications with increased breakout risk, while the insert’s geometry supports stable cutting in variable setups. The result is fewer interrupted cycles for regrind or replacement, consistent part quality and a tangible improvement in overall process reliability. Contact Metav Werkzeuge for application-specific guidance on Tungaloy inserts and availability; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for particular rostfreier Stahl grades or machine setups Technical Data Article number: 6886665 Manufacturer SKU: TUN6886665 Model series: ISO-Drehwendeschneidplatten Name: DNMG150604 AH6235 Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Relief angle: 0° Lead angle: 55° Hole: with cylindrical hole Special features Material: Hartmetall (carbide) Grade/coating: AH6235, PVD-coated Shape: rhombic Chipbreaker: double-sided Application: Turning, interrupted cuts Compatible with ISO toolholders FAQ What materials is this insert best suited for? The DNMG150604 AH6235 Tungaloy turning insert (SKU TUN6886665) is optimised for rostfreier Stahl and applications with interrupted cuts, where increased edge toughness is required. How does the AH6235 grade improve performance? AH6235 is a tougher PVD-coated carbide grade that enhances resistance to chipping and thermal shock; the DNMG150604 AH6235 insert benefits from this grade to deliver longer edge life in demanding turning. Is this insert compatible with standard ISO holders? Yes — the insert follows ISO dimensions and will fit compatible holders when form, free angle, tolerance class, fastening and thickness (6.35 mm) are matched to the toolholder specification. What advantages does the double-sided chipbreaker provide? The double-sided chipbreaker on the DNMG150604 AH6235 insert promotes consistent chip formation and improved chip control, which helps to maintain surface quality and reduce rework. How many usable cutting edges does the insert offer? Due to its double-sided construction and rhombic form, the insert provides multiple indexing positions; DNMG150604 AH6235 Tungaloy turning inserts can be rotated to present fresh cutting edges as needed (refer to holder instructions for indexing). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH6235 Wendeplatten - Tungaloy
DNMG150604 AH6235 Tungaloy-Wendeplatte, Drehwendeschneidplatte Die DNMG150604 AH6235 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für präzise Außen‑ und Innendrehprozesse mit besonderer Eignung für rostfreie Stähle und unterbrochene Schnitte. Hochverschleißfestes PVD‑Hartmetall Optimierte Spanbildung bei rostfreiem Stahl Rhombische Form mit 55° Schneidwinkel Mit zylindrischem Loch, doppelseitiger Einsatz Eckenradius 0,4 mm für feine Schnittkanten Präzise Anwendung für anspruchsvolle Drehprozesse Die Wendeplatte wurde für das Drehen von anspruchsvollen Werkstoffen entwickelt und bietet durch die AH6235‑Sorte eine erhöhte Bruchfestigkeit bei unterbrochenen Schnitten. Dank der ISO‑Normierung lässt sich die Platte zuverlässig mit passenden Außenhaltern und Bohrstangen kombinieren; Form, Freiwinkel und Toleranzklasse bestimmen die Kompatibilität. Für Anwender bedeutet das geringeren Rüstaufwand und reproduzierbare Ergebnisse bei seriennahen Fertigungsprozessen. Beschichtung und Material sichern Standzeit und Prozessstabilität Die Platte besteht aus Hartmetall mit PVD‑Beschichtung, was Verschleißfestigkeit und stabile Schneidkante kombiniert. Diese Material‑ und Beschichtungswahl sorgt für zuverlässige Standzeiten bei rostfreiem Stahl und reduziert die Gefahr von Ausbrüchen. Anwender profitieren von konstanter Bearbeitungsqualität bei wechselnden Schnittbedingungen und verlängerten Nachschleifintervallen. Konstruktive Merkmale für einfachen Werkzeugwechsel Die rhombische Plattenform, das zylindrische Loch und die doppelseitige Ausführung ermöglichen einen schnellen Wechsel und ökonomische Nutzung durch Wendbarkeit. Der Eckenradius von 0,4 mm und der Freiwinkel von 0° unterstützen feine Schnitte und präzise Konturen, während die Plattendicke von 6,35 mm Stabilität bei hohen Schnittkräften gewährleistet. Daraus resultiert ein robustes Handling im Produktionsalltag. Zielgruppe und Einsatzempfehlung Die Platte richtet sich an Fertiger in der Serien‑ und Einzelfertigung, die rostfreie Stähle bearbeiten oder häufig unterbrochene Schnitte ausführen. Ingenieure und Werkzeugverantwortliche schätzen die Kombination aus Prozesssicherheit und Wirtschaftlichkeit, insbesondere bei Anwendungen mit erhöhter Ausbruchgefahr. Für optimale Ergebnisse sollte die Schneidstoff‑Sorte AH6235 passend zur Schnittbedingung gewählt werden. Empfehlung: Für Bearbeitungen an rostfreiem Stahl und unterbrochenen Schnitten die DNMG150604 AH6235 Tungaloy‑Wendeplatte verwenden; bei Fragen zur Werkstück‑Anpassung oder zur Halterkompatibilität Kontakt: info@metav-werkzeuge.com / +49 2822 7131930 Produktmerkmale Artikelnummer: 6903387 Hersteller: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: DNMG150604 AH6235 Tungaloy-Wendeplatte SKU: TUN6903387 Fakten Winkel: 55° Eckenradius: 0,4 mm Plattendicke: 6,35 mm Plattengröße: 15 mm Besonderheiten Material: Hartmetall Beschichtung: PVD-Beschichtung (Physikalische Gasphasenabscheidung) Sorte: AH6235 (zähere Sorte für rostfreie Stähle und unterbrochene Schnitte) Spanbrecher: doppelseitig Plattenform: rhombisch Lochstil: zylindrisches Loch Freiwinkel: 0° Anwendung: Drehen FAQ Ist die Platte mit gängigen DNMG‑Haltern kompatibel? Die DNMG150604 AH6235 Tungaloy‑Wendeplatte entspricht ISO‑Normen und ist mit Standard‑DNMG‑Außenhaltern kompatibel, sofern Form, Freiwinkel und Toleranzklasse des Halters übereinstimmen. Für welche Werkstoffe ist die Sorte AH6235 besonders geeignet? Die Sorte AH6235 der Tungaloy‑Wendeplatte wurde für rostfreie Stähle und Anwendungen mit erhöhter Ausbruchgefahr entwickelt und bietet deshalb verbesserte Bruchfestigkeit. Wie beeinflusst der Eckenradius das Bearbeitungsergebnis? Der Eckenradius von 0,4 mm sorgt für feine Schnittkanten und reduziert Schneidkantenbelastung; das Ergebnis ist eine bessere Oberflächengüte bei dünnen Wandstärken und Konturen. Kann die Platte beidseitig genutzt werden? Ja, die DNMG150604 AH6235 Tungaloy‑Wendeplatte ist doppelseitig ausgeführt, was die Wirtschaftlichkeit erhöht und einfache Wendbarkeit ermöglicht. Welche Rolle spielt die PVD‑Beschichtung bei der Standzeit? Die PVD‑Beschichtung verstärkt die Verschleißfestigkeit der Hartmetall‑Basis und trägt zu konstanter Schneidkante sowie verlängerten Standzeiten bei anspruchsvollen Schnittbedingungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 150604 AH6235 Wendeplatten - Tungaloy
Highly wear-resistant PVD-coated carbide combined with a 55° rhombic geometry and a double-sided chipbreaker provides stable cutting performance in interrupted and demanding turning operations; benefit from predictable tool life and efficient chip control. Order the original insert directly via Metav Werkzeuge or consult our technical advisors for machining recommendations. DNMG150604 AH6235 Tungaloy turning insert — PVD-coated carbide, 55° rhombic A DNMG150604 AH6235 turning insert engineered for external and internal turning, optimised for rostfreier Stahl and interrupted cutting applications. PVD-coated carbide for enhanced wear resistance 55° rhombic geometry for versatile turning Double-sided chipbreaker for reliable chip control Suitable for rostfreier Stahl and interrupted cuts Consistent performance through material and coating The combination of a PVD-coated carbide substrate and the AH6235 grade provides a tougher cutting edge that reduces the risk of chipping under fluctuating cutting conditions. This leads to predictable tool life and fewer unexpected changeovers, which supports stable component throughput. The coating improves surface integrity and helps maintain cutting-edge stability when machining rostfreier Stahl, while the substrate toughness absorbs shock during intermittent cuts. Secure seating and ISO compatibility that simplifies tool setup As an ISO-standard indexable insert, compatibility with holders is defined by form, clearance, tolerance class, fastening method, size and thickness. The insert is supplied with a cylindrical hole and a 0° clearance geometry that suits a wide range of external and internal holder designs; this ensures a secure fit and repeatable positioning. Clear specification of form and dimensions reduces setup time and helps maintain consistent cutting conditions across batches. Geometry and chip control designed for process reliability The 55° rhombic shape and the double-sided chipbreaker support controlled chip formation and evacuation, which is particularly valuable in unstable cut conditions. The 0.4 mm corner radius balances edge strength with surface finish requirements, while the double-sided design extends usable cutting edges before indexing is required. The insert’s characteristics make it a practical choice where a combination of durability and chip control is needed for productive turning. Secure DNMG150604 AH6235 inserts through Metav Werkzeuge or contact our application specialists at Metav Werkzeuge for tailored recommendations — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: 6881894 Manufacturer SKU: TUN6881894 SKU: 6881894-Tungaloy Model series: ISO turning inserts Material: carbide Numbers / Core technical data Corner radius: 0.4 mm Insert angle: 55° Clearance angle: 0° Thickness: 6.35 mm Inscribed circle / size: 15 mm Designs / Special features PVD-coated carbide grade AH6235 Double-sided chipbreaker Rhombic insert shape Cylindrical hole (with hole) ISO-standardised indexable insert Application: turning; suitable for rostfreier Stahl and interrupted cuts FAQ Which materials is this insert intended for? The DNMG150604 AH6235 Tungaloy turning insert is specified for machining rostfreier Stahl and is also suitable for applications with interrupted cuts and increased risk of edge chipping. How is compatibility with holders determined? Compatibility is determined by the insert form, 0° clearance, tolerance class, fastening type, size and thickness; the ISO-standard designation DNMG150604 ensures predictable matching with corresponding holders. What advantages does the AH6235 grade provide? The AH6235 grade is a tougher, PVD-coated carbide formulation that improves resistance to edge breakage and supports reliable performance when machining rostfreier Stahl and unstable cutting conditions. Is the insert indexable on both sides? Yes, the double-sided chipbreaker and the rhombic geometry allow indexing of the cutting edges to extend tool life before replacement. How can the product be identified for reorder? Use the article number 6881894 or the manufacturer SKU TUN6881894 to reorder the DNMG150604 AH6235 Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide wear resistance, a 0.4 mm corner radius for reliable finish, and ISO compatibility for predictable clamping and process stability; order directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. DNMG150604 AH8005 — DNMG indexable turning insert for turning, Tungaloy DNMG150604 AH8005 Tungaloy indexable insert for ISO-compliant turning applications, engineered for stable cutting in heat‑resistant alloys and hard materials. ISO 150604 rhombic insert form PVD-coated carbide grade AH8005 Double-sided chipbreaker for stability Cylindrical hole for secure clamping Consistent performance for demanding turning operations The PVD‑coated carbide substrate of this insert delivers sustained cutting performance where thermal and abrasive loads are high. Designed as an ISO indexable turning insert, the grade AH8005 is optimised for machining heat‑resistant alloys and harder materials under stable set‑ups, so tool life and process reliability are improved. Because the geometry and coating are selected for abrasion and thermal resistance, the component life is extended and replacement cycles are reduced, which supports a more economical production rhythm. Compatibility and clamping that maintain precision Compatibility with toolholders is governed by insert shape, clearance angle, tolerance class, mounting method, size and thickness; this insert conforms to those ISO parameters. The rhombic plate form with a cylindrical hole allows secure location and consistent seating in most standard ISO holders, while the 0° clearance angle and 55° insert angle ensure predictable engagement and controlled cutting forces. As a consequence, repeatable part quality is achieved and setup time is shortened through straightforward indexing and reclamping. Explainable wear behaviour and application scope The double-sided chipbreaker reduces cutting forces and helps control chip flow, which benefits surface finish and reduces risk of built‑up edge on difficult alloys. With a 0.4 mm corner radius and 6.35 mm thickness, the insert balances edge strength and final part accuracy; a larger radius stabilises the edge for heavier cuts, while the plate thickness supports rigidity in the clamping system. For applications where heat generation and abrasive wear dominate, the AH8005 grade provides a wear‑resistant option that keeps productivity and surface quality high without sacrificing repeatability. For reliable, application‑specific advice on integrating Tungaloy AH8005 inserts into existing tool‑holder systems, contact Metav Werkzeuge to review holder compatibility, recommended cutting data and stocking options. Technical data Article number: 6741665 Manufacturer SKU: TUN6741665 SKU: 6741665-Tungaloy Designation: DNMG150604 AH8005 Manufacturer: Tungaloy Core technical data Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Clearance angle: 0° Insert angle: 55° Hole: with hole (cylindrical) Special features PVD-coated carbide Double-sided chipbreaker Rhombic plate form Suitable for turning Grade AH8005 for heat-resistant alloys and hard materials ISO designation 150604 FAQ What materials is this insert suitable for? The DNMG150604 AH8005 Tungaloy indexable turning insert is specified for heat‑resistant alloys and hard materials; the PVD‑coated carbide grade AH8005 is selected to resist abrasion and thermal stress during turning. How does the double-sided chipbreaker benefit machining? The double‑sided chipbreaker on the insert reduces cutting forces and improves chip control, which helps achieve better surface finish and consistent tool life when using the DNMG150604 AH8005 Tungaloy insert (SKU 6741665-Tungaloy). Is this insert compatible with standard ISO holders? Yes; the insert follows ISO 150604 form and is compatible with holders that match the shape, clearance angle, tolerance class, mounting method, size and thickness requirements. What does the 0.4 mm corner radius mean for part quality? A 0.4 mm corner radius provides a balance between edge strength and surface finish; it stabilises the cutting edge for heavier cuts while still allowing the production of accurate external and internal contours. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH8005 Wendeplatten - Tungaloy
Combining PVD-coated carbide durability with a 55° rhombic geometry and a precise 0.4 mm corner radius, this insert provides stable machining of heat‑resistant alloys and demanding hard materials; the double‑sided chipbreaker and cylindrical hole ensure reproducible clamping and economical use. Order directly via Metav Werkzeuge or request tailored advice from their consultants for holder compatibility and process setup. DNMG150604 AH8005 DNMG Turning Insert (ISO 150604) for Turning — Tungaloy The DNMG150604 AH8005 is an ISO‑standard rhombic indexable insert designed for robust external and internal turning of heat‑resistant alloys and other hard materials in stable setups. PVD-coated carbide for high wear resistance ISO 150604 rhombic insert, 55° cutting angle Double-sided chipbreaker for stable cutting Cylindrical hole for reproducible clamping Built for consistent, high‑wear performance The PVD‑coated carbide grade AH8005 delivers enhanced wear resistance and thermal stability, which translates into longer tool life and fewer index changes during production runs. The PVD coating reduces adhesion and oxidation when machining heat‑resistant alloys, so cutting edge integrity is maintained under elevated cutting temperatures. For operations where tool life and process reliability determine throughput, this insert reduces downtime and supports predictable cycle times. The combination of coating and substrate enables effective removal of hard materials with reduced flank wear, resulting in consistent surface quality and reduced rework. Precision geometry for predictable results Engineered as an ISO 150604 rhombic insert with a 55° cutting angle, the geometry provides a balance between strength and accessibility for a range of turning tasks. The 0.4 mm corner radius increases edge robustness for moderately interrupted cuts while still allowing good surface finish in stable set‑ups. A 6.35 mm thickness and the cylindrical hole ensure reproducible clamping and repeatable mounting concentricity with compatible holders; compatibility depends on form, clearance angle, tolerance class, fastening and overall insert dimensions. The double‑sided design effectively doubles available cutting edges per insert, improving cost per edge and simplifying inventory management. Focused for turning demanding materials with process reliability Designed specifically for turning, the insert pairs well with external holders or boring bars for internal work; select the double‑sided chipbreaker and grade to match workpiece material, rigidity and feed conditions for optimal chip control. In practice, this means choosing the chipbreaker type and grade to suit heavy roughing or fine finishing tasks — a stable setup will exploit the grade’s strengths in machining heat‑resistant alloys and hard steels. Beyond raw performance, the precise geometry supports repeatable tolerances and surface finishes that reduce downstream grinding or polishing. The result is a productive, reliable process that helps meet delivery dates and quality targets. For holder recommendations, matching clamping kits or application-specific advice on Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and fast fulfilment. Technical data Article number: 6741655 SKU: 6741655-Tungaloy Manufacturer SKU: TUN6741655 Model series: ISO-Drehwendeschneidplatten Material: carbide Facts ISO designation: 150604 Insert size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Cutting angle: 55° Rake angle: 0° Double-sided insert (2 usable edges per side) Special features PVD coating AH8005 Rhombic geometry (DNMG) Cylindrical hole for clamping Double-sided chipbreaker Suitable for external and internal turning Compatibility defined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The DNMG150604 AH8005 insert from Tungaloy is optimised for heat‑resistant alloys and hard materials where a wear‑resistant PVD-coated carbide delivers longer tool life. How does the insert ensure stable clamping and repeatability? The cylindrical hole and 6.35 mm thickness provide reproducible mounting; when paired with a suitable ISO holder, the insert’s geometry supports stable machining and repeatable results. How many cutting edges are available on the insert? The indexable insert is double‑sided with multiple usable edges, effectively increasing tool utilisation and lowering cost per edge for serial production. Which chipbreaker should be chosen for roughing versus finishing? Select a more aggressive chipbreaker style for heavy roughing and a finer geometry for finishing; the double‑sided chipbreaker on this grade allows flexibility depending on workpiece material and stability. Is the DNMG150604 AH8005 compatible with standard ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening and insert dimensions; the insert conforms to ISO 150604 and is intended for use with matching ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated cemented carbide and proven ISO compatibility for reliable, high-performance turning of heat-resistant alloys and hard materials; order the insert directly via Metav Werkzeuge or request advice from our technical consultants. DNMG150604 AH8005 Tungaloy indexable turning insert — PVD-coated cemented carbide, 0.4 mm corner radius A DNMG150604 AH8005 Tungaloy indexable insert for turning, engineered for stable machining of heat-resistant alloys and other hard materials in both external and internal operations. PVD-coated cemented carbide for high wear resistance ISO DNMG form with 55° approach angle Corner radius 0.4 mm for predictable cutting forces Double-sided chipbreaker with cylindrical hole for secure clamping Maximise process stability and tool life with a wear-resistant grade The PVD-coated cemented carbide structure of this ISO-indexed insert provides consistent wear resistance during demanding turning operations. The coating reduces adhesion and thermal degradation at high cutting temperatures, which is particularly beneficial when machining heat-resistant alloys and other hard materials. As a result, cutting-edge integrity is maintained for longer tool life, reducing tool changes and supporting uninterrupted production runs. Secure seating and repeatable positioning for ISO DNMG holders Compatibility relies on form, clearance angle, tolerance class, clamping method, size and thickness; the ISO DNMG form and the cylindrical hole design ensure precise seating in compatible holders. The insert’s 0° clearance and rhombic geometry give a defined cutting approach with a 55° angle that supports stable chip formation and predictable force vectors. The double-sided configuration contributes to efficient stock use by offering indexed edges and repeatable repositioning without adjustments. Better chip control and surface results with the right setup Choose the matching chipbreaker and the AH8005 grade for the material and machining stability required: the double-sided chipbreaker promotes consistent chip control, which helps maintain surface quality and reduce secondary operations. With the correct holder and clamping torque, the insert delivers improved surface finish and economical machining through longer intervals between regrinds or replacements. The combination of geometry and grade supports productive turning where dimensional repeatability and process uptime are key. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy AH8005 insert into existing turning workflows and for quotation or technical assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6776088 Manufacturer SKU: TUN6776088 Model series: ISO indexable inserts Core data Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Approach angle: 55° Clearance angle: 0° ISO code: 150604 Special features Material: cemented carbide Coating: PVD-coated Hole: with hole (cylindrical) Shape: rhombic Chipbreaker: double-sided Application: turning Grade: AH8005 — designed for heat‑resistant alloys and hard materials FAQ Is this insert suitable for machining heat-resistant alloys? Yes. The DNMG150604 AH8005 Tungaloy indexable turning insert uses a PVD-coated cemented carbide grade developed for machining heat-resistant alloys and other hard materials under stable conditions. Which holder characteristics determine compatibility with this insert? Compatibility is determined by form, clearance angle, tolerance class, clamping, size and thickness; the DNMG150604 AH8005 insert requires a matching DNMG-style holder with secure clamping for the cylindrical hole. What are the key dimensional specifications of this insert? Key specifications for the DNMG150604 AH8005 are: 15 mm size, 6.35 mm thickness, 0.4 mm corner radius, 55° approach angle, 0° clearance and a cylindrical centre hole. Can this insert be used for both external and internal turning? Yes. The insert is designed for external and internal turning; choosing the correct holder and cutting parameters ensures stable chip formation and consistent surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com