DNMG 150604 AH8015 Wendeplatten - Tungaloy
Robust performance and predictable tool life result from the combination of a PVD‑coated carbide grade (AH8015) and a precise 55° rhombic geometry; compatibility with ISO holders is achieved through matching form, clearance angle and plate dimensions. Order the DNMG150604 AH8015 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150604 AH8015 ISO rhombic indexable turning insert, PVD-coated carbide, Tungaloy The DNMG150604 AH8015 is an ISO‑standard rhombic indexable insert for turning, engineered for external and internal operations on heat‑resistant alloys and general turning applications. PVD-coated carbide grade AH8015 55° rhombic geometry Double-sided chipbreaker 0.4 mm nose radius for precision Consistent cutting performance from a balanced carbide grade The AH8015 grade provides a PVD‑coated carbide substrate that balances wear resistance with cutting‑edge stability, making it a reliable choice for machining heat‑resistant alloys and a wide range of steels. Such a composition reduces unexpected tool changeovers and supports more consistent cycle times, which in turn helps maintain production schedules. The construction is aimed at operators seeking dependable lifetime and repeatable results rather than experimental extremes. Geometry designed for precision and secure clamping Featuring a 55° geometry and a 0.4 mm nose radius, the insert offers a combination of precise contour control and accessible strength at the cutting edge, suitable for fine finishing as well as light roughing. The plate has a 6.35 mm thickness and a 15 mm size, with a cylindrical hole for positive, repeatable clamping; the 0° clearance angle supports stable contact with many standard ISO holders. These measured dimensions simplify holder selection and reduce set‑up time for serial production. Longer utilisation through reversible design and chip control The double‑sided design with an integrated chipbreaker gives two indexed cutting edges per side, improving cost efficiency by extending usable edge life before indexing or replacement is required. As an ISO standard plate with a rhombic shape, it allows for flexible application in both external and internal turning operations. The integrated double‑sided chipbreaker supports consistent chip formation and evacuation, which contributes to surface quality and process reliability. Selection and integration guidance for reliable results Chipbreaker choice and insert grade should be matched to the workpiece material, machining parameters and machine stability to achieve optimal results. The insert is compatible with ISO turning systems where form, clearance angle, tolerance class, fastening, size and thickness are matched; this ensures secure mounting and repeatable cutting conditions. If uncertain whether this insert matches a specific job, technical clarification is advisable to avoid over‑ or under‑specification of tooling. Contact Metav Werkzeuge for application advice and to order Tungaloy DNMG150604 AH8015 indexable turning inserts Technical Data Article number: 6947257 Manufacturer SKU: TUN6947257 SKU: 6947257-Tungaloy Name: DNMG150604 AH8015 Tungaloy insert Manufacturer: Tungaloy Facts Geometry angle: 55° Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Clearance angle: 0° ISO code: 150604 Hole: cylindrical hole Special features Rhombic plate Cylindrical hole Double-sided chipbreaker Material: carbide Coating: PVD (AH8015) Application: external and internal turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The DNMG150604 AH8015 insert is designed primarily for heat‑resistant alloys and a broad range of steels; the AH8015 PVD‑coated carbide offers a balanced performance for general turning tasks. Is the insert reversible and how many cutting edges are available? This rhombic DNMG insert is double‑sided and indexed, providing multiple usable cutting edges per plate before replacement is necessary. Which holders are compatible with this ISO insert? Compatibility depends on matching the holder to the plate form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG150604 follows ISO norms and uses a cylindrical hole for positive clamping. What surface finish can be expected with a 0.4 mm nose radius? A 0.4 mm nose radius supports a good compromise between strength and finish; it is suitable for fine contouring and producing consistent surface quality when cutting parameters are adjusted accordingly. How does the AH8015 grade affect tool life? The AH8015 grade combines wear resistance and edge stability; in many turning operations this results in predictable tool life and reduced process interruptions compared with uncoated alternatives. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide performance and ISO compatibility for reliable turning of heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for optimal grade and holder selection. DNMG150604 AH8015 ISO turning insert — PVD-coated carbide, 55° approach angle (Tungaloy) DNMG150604 AH8015 is an ISO-standard rhombic insert for external and internal turning, optimised for heat‑resistant alloys and general-purpose steel applications. DNMG ISO 150604 insert for turning PVD-coated carbide grade AH8015 Rhombic shape with 55° approach angle Double-sided design with cylindrical hole Consistent machining of heat‑resistant alloys and steels The PVD-coated carbide grade AH8015 delivers a balance between wear resistance and cutting-edge stability, making it a strong choice for the general machining of heat‑resistant alloys. As a result, cycle times remain predictable and tool life is extended under elevated temperatures. The insert’s rhombic geometry and 55° approach angle produce controlled chip flow and favourable cutting forces, which supports higher material removal rates without sacrificing surface finish. For planners and shopfloor engineers this means fewer tool changes and steadier process windows. Compatibility and secure clamping for quick tool changes The ISO designation and standardised form ensure that the insert mates with a wide range of tailored holders; compatibility depends on form, rake angle 0°, tolerance class, fastening method, size and thickness. The DNMG150604 geometry and the cylindrical hole facilitate repeatable seating and secure clamping in compatible external holders or boring bars, reducing setup time and risk of misalignment. Clear specifications make it straightforward to match the insert to an appropriate clamp set and replacement screws, improving overall machine uptime and simplifying inventory management. Robust chip control and predictable surface quality The double‑sided chipbreaker design and the corner radius 0.4 mm support stable chip segmentation and consistent surface integrity during both finishing and medium cutting operations. This leads to improved part quality and fewer rework cycles, an advantage when machining components where dimensional consistency is critical. Because the grade is formulated for thermal stability, the cutting edge maintains geometry for longer, which contributes to reproducible results across batches and reduces the variability that affects downstream processes. For precise application advice on Tungaloy turning inserts and to source matching holders or spare screws, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — for tailored recommendations and quick delivery Technical data Article number: 6947231 Manufacturer SKU: TUN6947231 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Manufacturer: Tungaloy Facts ISO designation: DNMG150604 Grade/sort: AH8015 Approach angle: 55° Clearance/rake angle: 0° Thickness: 6.35 mm Insert size: 15 Corner radius: 0.4 mm Hole: with cylindrical hole Special features PVD-coated carbide Rhombic plate form Double-sided with chipbreaker Compatible with ISO holders for turning Designed for heat‑resistant alloys and general machining FAQ What materials is this insert intended for? The DNMG150604 AH8015 insert is intended primarily for the machining of heat‑resistant alloys and general steel grades; the AH8015 grade balances wear resistance and edge stability for consistent results. How is the insert secured in the holder? The insert features a cylindrical hole and an ISO‑standard form that mates with compatible external holders or boring bars; clamping depends on the holder’s form, fastening and tolerance class. Can the insert be used for internal turning? Yes, the rhombic geometry and 55° approach angle make the insert suitable for both external and internal turning operations when paired with the correct holder. What chip control can be expected with this grade? The double‑sided chipbreaker and 0.4 mm corner radius provide controlled chip formation and consistent surface finish across finishing and medium‑cut conditions. Is this an ISO‑standard insert and how does that help inventory management? The ISO designation DNMG150604 ensures standardised interfaces and interchangeability across many holders, simplifying stockkeeping and replacement planning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide grade AH8015 and a 55° rhombic geometry to secure stable cutting performance on heat‑resistant alloys; the double‑sided chipbreaker and 0.4 mm corner radius allow flexible finishing and light roughing. Order the DNMG150604 AH8015 directly via Metav Werkzeuge or consult our specialists for holder compatibility. DNMG150604 AH8015 — Indexable turning insert (PVD-coated carbide) by Tungaloy DNMG150604 AH8015 is an ISO‑compliant rhombic indexable insert designed for external and internal turning of heat‑resistant alloys with a focus on balanced wear resistance and edge stability. ISO‑compliant rhombic geometry PVD‑coated carbide AH8015 55° lead angle for versatile turning Double‑sided chipbreaker with hole Increased process reliability for heat‑resistant alloys The DNMG150604 AH8015 indexable insert combines a PVD coating with a wear‑resistant carbide substrate to provide a reliable balance between edge stability and resistance to abrasive and adhesive wear. For shops machining heat‑resistant alloys, this results in more consistent tool life and reduced variation in surface finish, which supports predictable cycle times and fewer unplanned tool changes. Explaining technical choices: the PVD layer enhances resistance to high temperatures and reduces chemical affinity between tool and workpiece, while the carbide body maintains rigidity under load. These material properties translate into measurable production advantages such as fewer rejects and steadier component tolerances. Geometry that adapts to finishing and light stock removal The rhombic 55° lead angle and 0° relief configuration provide a versatile contact geometry for a wide range of turning tasks, from semi‑finishing to finishing cuts. The modest 0.4 mm corner radius helps achieve a balance between edge strength and surface quality, reducing the tendency for chipping during interrupted cuts. The double‑sided chipbreaker promotes controlled chip formation across varied feeds, lowering the risk of long, stringy swarf and improving process safety at elevated cutting speeds. Compatibility with clamping systems is determined by form, relief angle, tolerance class, attachment, size and thickness, so selection of a matching holder and clamping kit is essential for optimal results. Integration into production and practical advantages As part of an ISO‑based insert system, the insert installs into a suitable external holder or boring bar and is secured using the appropriate support pad, clamping set and replacement screw. The robust 6.35 mm thickness and cylindrical hole ensure secure seating and repeatable positioning, aiding indexing and regrinding strategies where applicable. The double‑sided design reduces tooling cost per cutting edge by permitting rotation to a fresh edge, while the standard 15 mm size simplifies stock management. Clear labelling and ISO conformity aid toolroom logistics and spare‑parts handling, supporting uninterrupted production and shorter setup times. For technical advice on integrating the DNMG150604 AH8015 into specific machining cycles or to discuss holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert support and availability details Technical Data Article number: 6950974 Manufacturer SKU: TUN6950974 SKU: 6950974-Tungaloy Article name: DNMG150604 AH8015 Tungaloy indexable insert Core specifications Corner radius: 0.4 mm Thickness: 6.35 mm Insert size: 15 mm Lead angle: 55° Relief angle: 0° Mounting: with hole (cylindrical hole) Materials & special features Carbide substrate PVD coating Rhombic insert form Double‑sided chipbreaker ISO turning insert series Application: Turning FAQ What materials is this insert suitable for? The DNMG150604 AH8015 Tungaloy indexable insert (SKU 6950974‑Tungaloy) is primarily specified for the general machining of heat‑resistant alloys, offering a compromise between wear resistance and edge stability suitable for such materials. How does the PVD coating benefit cutting performance? The PVD coating on the AH8015 grade enhances thermal and chemical resistance, which helps the insert maintain edge integrity at higher cutting temperatures and improves overall wear behaviour during continuous turning operations. What role does the double‑sided chipbreaker play? The double‑sided chipbreaker provides predictable chip control across varying feeds and depths of cut; its design supports safer swarf evacuation and steadier surface finish when used within recommended cutting parameters. Is holder compatibility standardised for this insert? Compatibility is determined by insert form, relief angle, tolerance class, attachment, size and thickness. Matching the insert with a correctly specified external holder or boring bar ensures secure clamping and repeatable performance. Can this insert be indexed to a fresh cutting edge? Yes, the double‑sided design allows indexing to alternative edges, extending the effective life of each insert and improving cost efficiency in production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH8015 Wendeplatten - Tungaloy
Optimise turning processes with the combination of a PVD-coated AH8015 grade and the robust 55° DNMG geometry for stable cutting edges and reliable wear resistance. Benefit from precise chip control and straightforward holder compatibility to reduce changeovers and improve productivity. Order the DNMG150604 AH8015 Tungaloy insert directly via Metav Werkzeuge or ask our consultants for application guidance. DNMG150604 AH8015 — Tungaloy indexable turning insert for Turning, PVD-coated carbide, 55° geometry DNMG150604 AH8015 is an ISO-standard indexable insert designed for external and internal turning of heat-resistant alloys and general turning tasks. PVD-coated AH8015 grade ISO DNMG profile, 55° geometry Double-sided chipbreaker 0° relief angle for positive engagement Consistent cutting performance for heat-resistant alloys The combination of the PVD-coated cutting grade AH8015 and a compact diamond geometry delivers a reliable balance between wear resistance and edge stability. The insert’s 55° geometry and 0.4 mm corner radius support controlled engagement in tougher alloys, reducing edge chipping and prolonging effective tool life. Thanks to the PVD-coated carbide substrate, the insert withstands elevated temperatures and abrasive conditions typical of turning heat-resistant materials, which results in fewer unplanned stoppages and steadier cycle times. Clear compatibility and easier process planning Built to ISO dimensions, the insert ensures predictable fitment with standard holders when form, relief angle, tolerance class, clamping and thickness are matched. The ISO DNMG profile and cylindrical hole simplify clamping compatibility checks; the 6.35 mm thickness and 15 mm inscribed circle are typical, established values that support repeatable set-ups. Choosing an insert with a double-sided chipbreaker and a proven grade like AH8015 helps to maintain consistent chip flow and surface finish, enabling clearer process windows and fewer corrective measures during production. Practical benefits that improve workshop throughput Designed for both external and internal turning, this insert reduces tool-change frequency through balanced edge stability and robust wear performance. The double-sided design doubles available cutting edges per index, improving cost-efficiency over single-edged alternatives. When paired with a correctly selected holder and clamping set, the result is a predictable machining cycle, improved first-pass quality and reduced inspection time — advantages that translate directly into higher throughput and lower per-part cost. For reliable turning performance with the Tungaloy AH8015 grade, contact Metav Werkzeuge for tailored advice and quick availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947176 Manufacturer SKU: TUN6947176 Stock SKU: 6947176-Tungaloy Model series: ISO turning indexable inserts Name: DNMG150604 AH8015 Tungaloy insert Material: Carbide (Hartmetall), PVD-coated Facts Corner radius: 0.4 mm Thickness: 6.35 mm Inscribed circle / size: 15 mm Geometry angle: 55° Relief angle: 0° Hole: cylindrical hole (with hole) Chipbreaker: double-sided Special features PVD-coated grade AH8015 Balanced wear resistance and edge stability Designed for external and internal turning ISO DNMG rhombic profile (55°) Compatible with standard ISO turning holders Suitable for heat-resistant alloys; general-purpose turning FAQ What materials is this insert best suited for? The AH8015 grade of the DNMG150604 insert is developed as a first choice for general machining of heat-resistant alloys, offering a balance of wear resistance and edge stability for such materials. How does the DNMG150604 insert affect chip control? The insert’s double-sided chipbreaker is engineered to promote consistent chip control, improving evacuation and surface finish during both external and internal turning operations. Is holder compatibility standardised? Yes. The DNMG150604 follows ISO dimensions, so compatibility depends on matching form, relief angle, tolerance class, clamping and thickness with the chosen holder or boring bar. How many usable cutting edges does the insert provide? As a double-sided rhombic insert, the DNMG150604 AH8015 offers multiple indexing positions, effectively increasing the number of usable edges per insert when correctly mounted. What is the effect of the 0.4 mm corner radius? The 0.4 mm corner radius provides a compromise between strength and detail: it supports robust edge strength for interrupted cuts while allowing acceptable surface finish for most turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide and a stable 55° rhombic geometry for precise external and internal turning operations; the double-sided chipbreaker and standard ISO form ensure cost-efficient indexability and easy holder compatibility — order or consult Metav Werkzeuge for application advice. DNMG 150604 AH8015 DNMG Turning Insert for Drehen — Tungaloy DNMG150604 AH8015 Tungaloy turning insert for general-purpose machining, optimised for temperature-resistant alloys and versatile external and internal turning. Rhombic 55° geometry for versatile turning PVD-coated carbide for balanced wear resistance Double-sided chipbreaker for reliable chip control Cylindrical hole and ISO standard for secure clamping High reproducibility through standardised ISO geometry The ISO turning insert design guarantees consistent fit and repeatability across compatible holders and boring bars. The rhombic 55° geometry provides a robust cutting edge for a wide range of diameters and contours, while the standardised hole and tolerance classes simplify replacement and inventory management. This results in shorter setup times and predictable component quality during serial production. Balanced cutting performance for heat-resistant alloys The AH8015 PVD-coated carbide combines a wear-resistant coating with a substrate optimised for edge stability, making it a first-choice grade for machining heat-resistant alloys. The coating reduces flank and crater wear under elevated temperatures, and the substrate maintains a stable cutting edge to minimise vibration and chatter. These characteristics translate into longer tool life and fewer interruptions in production. Practical geometry and chip control that improve efficiency A corner radius of 0.4 mm and a 6.35 mm thickness deliver a favourable strength-to-profile ratio: sufficient edge support for interrupted cuts yet precise enough for finishing passes. The double-sided chipbreaker design controls swarf formation in both directions, aiding coolant penetration and maintaining surface finish. This focused geometry helps reduce rework and supports higher feed rates where process stability allows. Simple selection and integration into existing toolsets Specified as an indexable turning insert to ISO standards, compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The insert’s 0° relief angle and rhombic form allow straightforward matching with common external holders and internal boring bars. For operations requiring predictable performance across different workpieces, this insert integrates into standard tool programmes without extensive requalification. Suitable applications and tangible benefits Designed for external and internal turning, the insert suits general machining tasks on temperature-resistant alloys and other demanding materials. The balanced combination of wear resistance and cutting-edge stability reduces tool changes and supports continuous production. Where surface quality and repeatability are required, the insert contributes to consistent component batches and efficient machining cycles. For tailored recommendations and current stock details please contact Metav Werkzeuge; Metav Werkzeuge can advise on matching holders, compatible grades and suitable machining parameters for the Tungaloy DNMG150604 AH8015 insert Technical data Article number: 6776089 Manufacturer SKU: TUN6776089 SKU: 6776089-Tungaloy Model series: ISO turning inserts Designation: DNMG150604 AH8015 Tungaloy turning insert Data Cutting angle: 55° Thickness: 6.35 mm Size: 15 mm Corner radius: 0.4 mm Relief angle: 0° Special features Material: carbide Coating: PVD Insert shape: rhombic Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Application: turning ISO designation: 150604 FAQ What materials is this insert best suited for? The DNMG150604 AH8015 Tungaloy turning insert is optimised for temperature-resistant alloys and general-purpose applications, offering a balance of wear resistance and edge stability. How does the chipbreaker design affect machining? The double-sided chipbreaker on the insert promotes consistent chip control in both cutting directions, improving coolant access and helping to maintain surface finish during longer cycles. Can this insert be used for internal as well as external turning? Yes, the rhombic 55° geometry and ISO conformity make the insert suitable for both external and internal turning when mounted in compatible holders or boring bars. What does the 0° relief angle mean for tool setup? A 0° relief angle affects how the insert contacts the workpiece and is typical for certain holder geometries; it requires matching holder clearance to maintain correct cutting clearance and avoid rubbing. Which designation should be referenced when reordering? Reorder using the article number 6776089 or the manufacturer SKU TUN6776089 for the DNMG150604 AH8015 Tungaloy indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH8015 grade and a stable rhombic geometry for consistent turning performance in heat‑resistant alloys; order the inserts directly via Metav Werkzeuge or consult their specialists for application support. DNMG 150604 AH8015 Tungaloy turning insert — rhombic ISO DNMG150604, PVD-coated The DNMG150604 AH8015 is a rhombic ISO turning insert designed for external and internal turning, optimised for machining heat‑resistant alloys and general turning tasks. PVD-coated AH8015 for heat-resistant alloys Double-sided chipbreaker for stable chip control Rhombic DNMG shape, 15 mm, 0.4 mm radius ISO compatibility with cylindrical‑hole holders Longer tool life through balanced grade and coating The PVD-coated grade AH8015 combines wear resistance with edge stability to deliver longer tool life when machining elevated‑temperature alloys. The PVD layer improves thermal resistance and lowers flank wear under demanding cutting conditions, while the cemented carbide substrate maintains a robust cutting edge. This balance reduces the frequency of insert changes and supports predictable process windows, which helps maintain production throughput and reduces unscheduled downtime. Accurate geometry for reliable holder compatibility With its rhombic DNMG geometry and standard ISO designation, the insert fits most ISO‑specification external holders and boring bars when matched by form, relief angle and thickness. The DNMG150604 format provides a 15 mm inscribed circle and a 0.4 mm corner radius, coupled with a 6.35 mm plate thickness and 0° relief, ensuring repeatable positioning and secure clamping via the cylindrical hole. These measurable qualities simplify tool set‑up and assure consistent component tolerances in series production. Controlled chips and process stability for turning operations The double‑sided chipbreaker geometry promotes reliable chip formation across a range of feeds and depths of cut, improving evacuation in both external and internal turning. Stable chip control reduces heat concentration at the cutting edge and supports surface finish consistency, particularly when turning tough, heat‑resistant materials. When combined with a suitably rigid holder and the recommended clamping set, the system composition—insert, holder, shim and screws—delivers reproducible cutting performance and easier tool management. Practical application guidance for selection and use This grade is the first choice for general machining of heat‑resistant alloys, offering a pragmatic trade‑off between productivity and edge life. Selection of the correct chipbreaker and cutter radius should reflect workpiece stability and the intended feed rates. For less stable setups, favour smaller depths of cut and robust clamping; for stable high‑feed operations, the AH8015 grade sustains consistent performance while preserving surface quality. The insert’s geometry and coating make it suitable for a wide variety of turning tasks where a reliable, economical cutting solution is required. Contact Metav Werkzeuge for application‑specific recommendations on Tungaloy DNMG150604 AH8015 inserts via info@metav-werkzeuge.com or +49 2822 7131930 for fast, practical advice Technical data Article number: 6947116-Tungaloy (SKU) Manufacturer SKU: TUN6947116 Manufacturer article number: 6947116 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Facts ISO designation: DNMG150604 Size: 15 mm inscribed circle Thickness: 6.35 mm Corner radius: 0.4 mm Relief angle: 0° Mounting: with hole (cylindrical hole) Approach angle: 55° Special features Material: cemented carbide (carbide) Coating / grade: PVD‑coated AH8015 Chipbreaker: double-sided Shape: rhombic Typical use: external and internal turning System: insert + holder + shim/clamp set + screws FAQ What materials is this insert best suited for? The DNMG150604 AH8015 insert is specified primarily for heat‑resistant alloys, where the PVD‑coated AH8015 grade provides a balanced resistance to wear and good edge stability. Is the insert compatible with standard ISO DNMG holders? Yes; the DNMG150604 format and the cylindrical hole ensure compatibility with holders that meet the ISO DNMG specification when form, relief angle and thickness match. How does the chipbreaker affect performance? The double‑sided chipbreaker promotes consistent chip formation and evacuation, which improves process stability and surface finish during turning operations. Can the insert be used for internal boring as well as external turning? The geometry and chip control make the insert suitable for both external and internal turning, provided the chosen holder and setup deliver adequate rigidity. What measurable dimensions should be verified before ordering? Verify ISO designation, inscribed circle (15 mm), thickness (6.35 mm), corner radius (0.4 mm) and hole style; these determine correct fitment in the selected holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced wear resistance and edge stability of the PVD-coated AH8015 grade combined with the 55° DNMG geometry for versatile turning of heat‑resistant alloys; this combination supports stable production and predictable tool life. Order the DNMG150604 AH8015 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants for holder compatibility and process advice. DNMG150604 AH8015 Tungaloy turning insert — PVD-coated carbide, 55° rhombic form for turning DNMG150604 AH8015 is an ISO-standard indexable turning insert designed for external and internal turning of heat‑resistant alloys and general turning tasks PVD-coated carbide grade AH8015 Double-sided chipbreaker 55° rhombic DNMG form 0.4 mm corner radius, 6.35 mm thickness Sustained productivity through balanced grade and coating The combination of a PVD coating with a wear-resistant cemented carbide substrate delivers a balance between edge stability and longevity that benefits batch and continuous production. The AH8015 grade is specified for the machining of heat‑resistant alloys, offering controlled wear progression rather than abrupt failure, which supports predictable tool life and reduced process interruptions. For operations where both surface quality and edge integrity matter, this selection reduces rework and contributes to overall efficiency. Geometry and chip control that reduce setup complexity The DNMG rhombic geometry with a 55° angle and a 0.4 mm corner radius provides adaptability for both finishing and light roughing passes. The insert’s double-sided chipbreaker arrangement and the cylindrical mounting hole enable reliable clamping and improved chip formation across a range of feed rates. A plate thickness of 6.35 mm and a plate size of 15 mm ensure mechanical stability in conventional external holders and boring bars, helping to maintain form accuracy and consistent surface finish when paired with the correct seat and clamp system. System-aware design for straightforward integration These ISO-standard indexable plates are part of a system that includes a matching external holder or boring bar, a shim or support plate, a clamping set and replacement screws. Compatibility with a chosen holder depends on the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; selecting the appropriate chipbreaker and grade according to workpiece material and machine stability is essential for best results. The product supports quick indexability and straightforward replacement, reducing downtime and simplifying tool management in the workshop. For application advice or to order Tungaloy DNMG150604 AH8015 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — our consultants will advise on holder compatibility and process parameters. Technical Data Article number: 6947194 Manufacturer SKU: TUN6947194 SKU: 6947194-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: DNMG150604 AH8015 Tungaloy-Wendeplatte Core Data Plate designation: 150604 Plate size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.4 mm Clearance angle: 0° Insert angle: 55° Mounting: with hole (cylindrical hole) Special features Material: cemented carbide (PVD-coated AH8015) Plate form: rhombic (DNMG) Chipbreaker: double-sided Application: turning System notes: ISO-standard insert, compatible with matching holders, shim and clamping set FAQ What materials is this insert best suited for? The DNMG150604 AH8015 insert is optimised for heat‑resistant alloys and general turning tasks; the PVD-coated cemented carbide provides wear resistance and stable cutting-edge performance in such materials. Does the insert require a specific holder type? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening and size; the DNMG150604 AH8015 fits ISO-standard holders designed for rhombic DNMG plates with a cylindrical-hole mounting. How does the double-sided chipbreaker affect tool life? The double-sided chipbreaker on this indexable insert promotes consistent chip formation on both usable faces, contributing to predictable wear and facilitating economical indexing. Can the insert be used for internal and external turning? Yes, the rhombic 55° geometry and stable plate thickness make this insert suitable for both external and internal turning when paired with an appropriate boring bar or external holder. What is the advantage of the AH8015 grade? AH8015 is a PVD-coated grade that balances wear resistance and edge stability, offering reliable performance when machining challenging alloys and helping to maintain process consistency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide AH8015 and a double-sided chipbreaker to achieve consistent cutting performance on heat-resistant alloys; order directly via Metav Werkzeuge or request advice from our consultants for optimal tool matching. DNMG150604 AH8015 Tungaloy turning insert — PVD-coated carbide, 55° rhombic geometry The DNMG150604 AH8015 is an ISO rhombic turning insert designed for external and internal turning of heat-resistant alloys and general turning tasks where a balanced wear resistance and edge stability are required. PVD-coated carbide AH8015 Double-sided chipbreaker for stable chips ISO rhombic 55° geometry Cylindrical hole, 6.35 mm plate thickness Increased productivity with a balanced cutting grade The AH8015 grade is a PVD-coated carbide optimised for the general machining of heat-resistant alloys: it provides a compromise between wear resistance and edge stability, extending productive cutting intervals. The PVD layer reduces adhesion and flank wear at elevated temperatures, which translates into longer tool life and fewer insert changes. In practice, this means a steadier process window and more predictable cycle times when compared with uncoated grades, particularly on challenging alloys where thermal loads compromise untreated cutting edges. Predictable seating and repeatable accuracy on ISO systems Designed to the ISO insert form, the rhombic 55° geometry and the specified seating parameters ensure compatibility with standard holders; the insert’s fit is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The 0° clearance angle and the cylindrical hole support reliable clamping and repeatable seating, which reduces micro-movements and vibration. The result is improved surface finish and consistent dimensional accuracy across batches — key factors for precision turning operations where reproducibility is essential. Robust shop-floor integration and controlled chip formation With a double-sided chipbreaker and a 0.4 mm corner radius, this insert offers controlled chip formation and the option to index the second cutting edge for extended life. The 6.35 mm plate thickness provides structural rigidity that helps resist deflection under moderate cutting forces, supporting stable cutting at higher feed rates. Applied in both external and internal turning, the insert is part of a system comprising the insert, a matching external holder or boring bar, shims and clamping screws; selecting the correct chipbreaker and grade according to the workpiece material and machining stability yields the best surface quality and tool economy. The DNMG150604 format remains a versatile choice for many general turning tasks. Contact Metav Werkzeuge today for tailored advice and to order the Tungaloy DNMG150604 AH8015 turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6741656 Manufacturer SKU: TUN6741656 Manufacturer item number: 6741656 Model series: ISO-Drehwendeschneidplatten Facts Insert designation: DNMG150604 ISO code: 150604 Geometry: 55° Corner radius: 0.4 mm Plate size: 15 Plate thickness: 6.35 mm Clearance angle: 0° Special features Material: carbide Grade/coating: AH8015, PVD-coated Hole: with hole (cylindrical hole) Plate form: rhombic Chipbreaker: double-sided FAQ What materials is this insert suitable for? The DNMG150604 AH8015 Tungaloy turning insert is optimised for heat-resistant alloys and provides a balanced performance across a broad range of difficult-to-machine materials. How does the PVD coating affect tool life? The PVD-coated carbide of the AH8015 grade reduces adhesion and thermal wear, so the insert maintains edge stability longer under higher temperatures than uncoated alternatives. Can the insert be used for both internal and external turning? Yes, the insert is intended for both external and internal turning; appropriate holder selection and correct chipbreaker choice are important for optimal results. What does the 0° clearance angle mean for clamping? A 0° clearance angle indicates the specified relief geometry and contributes to a secure seating and predictable contact with the holder when combined with the correct tolerance class and fastening. Is the DNMG150604 compatible with standard ISO holders? The DNMG150604 format follows ISO specifications; compatibility depends on matching the holder by form, size, thickness, fastening and tolerance class for proper fit and repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH8015 Wendeplatten - Tungaloy
Combining PVD-coated carbide wear resistance with an ISO 150604 geometry and a 0.4 mm corner radius, this insert delivers stable cutting performance for the turning of heat‑resistant alloys; order via Metav Werkzeuge or consult the technical team for holder compatibility and grade selection. DNMG 150604 AH8015 turning insert – PVD-coated carbide, 0.4 mm radius | Tungaloy A DNMG150604 AH8015 indexable turning insert engineered for general turning of heat‑resistant alloys, offering a balance of wear resistance and edge stability for demanding production runs PVD-coated carbide grade AH8015 0.4 mm corner radius for fine finishing ISO 150604 geometry, 55° nose angle Double-sided chipbreaker, cylindrical hole Consistent cutting performance for heat‑resistant alloys The PVD-coated carbide substrate is specified to combine wear resistance with edge integrity, which reduces the frequency of insert changes in continuous turning operations. The grade is optimised for work on heat‑resistant alloys, so higher thermal loads during turning do not compromise flank life as quickly as with uncoated grades. Choosing this geometry reduces unexpected downtime and supports predictable machining cycles. Geometry that simplifies tool matching and setup The insert’s ISO 150604 form and rhombic shape ensure compatibility with standard holders when form, clearance angle, tolerance class, fastening and thickness are matched. The 55° nose angle promotes a favourable cutting force direction for medium‑duty turning, while the 0.4 mm corner radius helps to achieve a controlled surface finish without excessive cutting force. Specifying the correct holder and tightening torque will secure repeatable clamping and minimise vibration. Economic machining through robust edge stability A double‑sided chipbreaker and the PVD coating contribute to stable chip control and extended tool life, which improves process economy across serial production. The coating reduces built‑up edge and thermal abrasion, enabling higher metal removal rates where appropriate. When paired with a suitable external holder and correct feeds, the system offers a reliable route to consistent part quality and fewer tool changes per shift. Practical guidance for integration into production The insert is supplied with a cylindrical mounting hole and a plate thickness of 6.35 mm, facilitating straightforward retrofit into compatible toolholders. As the grade is tailored to heat‑resistant alloys, coolant strategy and cutting parameters should be chosen according to component material and fixture rigidity. For trials, start with conservative feeds and increase progressively until the desired balance between surface finish and cycle time is achieved. For precise turning of heat‑resistant alloys, contact Metav Werkzeuge for support in selecting the correct holder and grade pairing and to ensure optimal process integration. Technical data Article number: 6947142 SKU: 6947142-Tungaloy Manufacturer article number: TUN6947142 Model series: ISO indexable turning inserts Facts Corner radius: 0.4 mm Plate thickness: 6.35 mm Plate size: 15 mm Nose/lead angle: 55° Clearance angle: 0° ISO code: 150604 Design & features Material: carbide Coating: PVD Shape: rhombic Hole: cylindrical hole Chipbreaker: double-sided Mounting: compatible with standard ISO holders Application: turning of heat‑resistant alloys FAQ What materials is this insert best suited for? The DNMG150604 AH8015 insert is intended primarily for the turning of heat‑resistant alloys; the PVD‑coated carbide substrate offers a good balance between wear resistance and edge stability for these materials. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius supports a finer surface finish than larger radii while keeping cutting forces moderate; the radius on the DNMG150604 insert aids controlled chip formation and consistent part surfaces. Is the insert compatible with standard ISO toolholders? Yes, the insert uses the ISO 150604 geometry and a cylindrical mounting hole; compatibility depends on matching form, thickness (6.35 mm), fastening and tolerance class with the chosen holder. Can the PVD coating be used for dry machining? The PVD coating improves wear resistance and thermal stability, making the insert a viable option for low‑lubrication or dry approaches in some applications, though process testing under actual conditions is recommended. How many cutting edges are available per insert? This double‑sided insert provides multiple indexing positions; the exact number of usable edges depends on wear patterns and machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH8015 durability, 55° rhombic geometry and ISO interchangeability for steady turning results; order the insert directly via Metav Werkzeuge or consult their technical advisors for application-specific guidance. DNMG 150604 AH8015 turning insert — ISO turning insert, PVD-coated carbide (Tungaloy) The DNMG150604 AH8015 turning insert is an ISO-standard indexable insert designed for external and internal turning, especially suited to general machining of heat‑resistant alloys with a balance of wear resistance and edge stability. PVD-coated cemented carbide AH8015 Optimised for heat‑resistant alloys Rhombic 55° geometry with 0° clearance Double‑sided insert with cylindrical hole Proven wear resistance for demanding alloys The PVD-coated AH8015 grade provides a reliable mix of wear resistance and edge stability, making it a cost‑efficient choice for prolonged production runs on heat‑resistant alloys. The coating supports consistent tool life under thermal load, which translates into fewer insert changes and more predictable tool costs. Performance data from the model series indicate suitability for general turning tasks where balanced durability and process reliability are priorities. Geometry that stabilises cutting and improves accuracy The rhombic 55° form with a 0° clearance and a 0.4 mm corner radius delivers a stable cutting engagement for both light finishing and medium roughing. The insert’s double‑sided design and cylindrical locating hole ensure repeatable seating in ISO holders, reducing run‑out and vibration. These geometry features enable steady surface finishes and dimension control, while the symmetrical layout allows economical index‑and‑turn use within standard clamping systems. ISO compatibility and practical handling benefits As an ISO‑standard turning insert it integrates into established tool systems with minimal adaptation. Key dimensions such as 6.35 mm thickness and plate size 15 mm conform to common holder interfaces, simplifying inventory and re‑stocking. The insert is delivered as a single indexable plate suitable for standard clamping sets and replacement screws; this system approach shortens setup time and supports efficient changeovers in busy machining environments. Application guidance for consistent results Intended primarily for turning operations, the insert performs best when the chipbreaker and grade are matched to material, machining type and machine stability. Select the appropriate chip control style and cutting parameters for the alloy in question to exploit the AH8015 balance of toughness and wear resistance. The indexable plate concept supports both external and internal turning sequences when combined with a suitable outside holder or boring bar and correct mounting hardware. For procurement or technical advice on Tungaloy DNMG150604 AH8015 turning inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support and stock information Technical Data Article number: 6947091 Manufacturer SKU: TUN6947091 SKU: 6947091-Tungaloy Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Insert designation: DNMG150604 Grade / coating: AH8015 (PVD) Geometry angle: 55° Clearance angle: 0° Corner radius: 0.4 mm Thickness: 6.35 mm Plate size: 15 Special features Material: cemented carbide Plate shape: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Typical application: turning (external and internal) ISO‑standard indexable insert FAQ What materials is this insert best suited for? The DNMG150604 AH8015 insert is primarily specified for machining heat‑resistant alloys; the AH8015 grade offers balanced wear resistance and edge stability for such materials. Is the DNMG150604 compatible with standard ISO holders? Yes. The insert follows ISO indexing dimensions and fits holders that accept DNMG150604 geometry, provided form, clearance angle, tolerance class, fastening and thickness match the holder. How many cutting edges are available per insert? The double‑sided design offers multiple usable edges; the exact count depends on the indexable plate orientation and the chosen corner radius. Which features help to control chip formation? The double‑sided chipbreaker included on this insert supports chip control; selecting the chipbreaker style appropriate to the workpiece material and machining parameters improves evacuation and surface quality. Can the insert be used for both roughing and finishing? The geometry and AH8015 grade are versatile enough for light finishing and medium roughing when cutting parameters are adjusted to match machine stability and alloy properties. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide grade AH8015, precise 55° rhombic geometry and a 0.4 mm nose radius for predictable finishing performance; order directly via Metav Werkzeuge or consult our technical team for machining advice. DNMG 150604 AH8015 Tungaloy turning insert — ISO rhombic insert with PVD coating for turning DNMG150604 AH8015 Tungaloy insert is an ISO‑standard rhombic turning insert engineered for external and internal turning, optimised for heat‑resistant alloys. PVD-coated carbide grade AH8015 ISO rhombic DNMG 55° geometry 0.4 mm nose radius for fine finishing Double-sided chipbreaker, cylindrical hole Greater process stability through balanced grade selection The AH8015 grade offers a balanced combination of wear resistance and edge stability, achieved via a PVD coating on a carbide substrate. This composition supports steady tool life and consistent surface quality when machining demanding, heat‑resistant alloys. Selecting this grade helps to reduce unplanned tool changes and contributes to a more predictable production rhythm, particularly in medium‑to‑high cutting conditions. Precise geometry for accurate turning results The ISO‑rhombic design with a 55° main cutting face and a 0.4 mm nose radius provides a versatile profile for finishing and medium machining operations. The insert’s form and dimensions follow ISO standards, which simplifies tool selection and replacement within established tool systems. The 0.4 mm corner radius gives a fine edge for improved surface finish while maintaining sufficient edge strength for transient loads, and the 6.35 mm plate thickness ensures stable seating in the toolholder. Seamless integration with standard holder systems Compatibility is determined by form, clearance angle, tolerance class, fastening style, size and thickness; this insert is supplied with a cylindrical hole for secure mounting and features a double‑sided chipbreaker for consistent chip control. Such design elements make the insert straightforward to integrate into existing turning setups and reduce setup variation. The double‑sided nature also extends usable life per insert, offering economical use of the cutting edge. Practical advantages for shopfloor productivity Using a well‑matched chipbreaker and the AH8015 grade supports efficient chip evacuation and reduces the risk of edge chipping on interrupted cuts. The insert’s ISO format facilitates inventory management and simplifies operator training, while the robust carbide construction minimises downtime. For workshops machining heat‑resistant alloys, this combination helps achieve reproducible results and lower per‑part tooling cost through extended edge life. For tailored advice on selecting the correct chipbreaker and holder combination for the Tungaloy DNMG150604 AH8015 insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application parameters or to place an order. Technical Data Article number: 6741666 Facts SKU: 6741666-Tungaloy Geometry: DNMG 150604 / ISO 150604 Main angle: 55° Corner radius: 0.4 mm Plate thickness: 6.35 mm Plate size: 15 mm Special features Material: carbide Coating: PVD Grade: AH8015 Hole: with cylindrical hole Chipbreaker: double-sided Plate form: rhombic Application: turning Model series: ISO turning inserts FAQ What materials is this insert suitable for? The DNMG150604 AH8015 Tungaloy insert (SKU 6741666-Tungaloy) is designed as a first choice for general machining of heat‑resistant alloys and offers a balanced compromise between wear resistance and edge stability. Can this insert be used for both external and internal turning? Yes, the insert’s ISO rhombic form and its 55° geometry make it suitable for both external and internal turning operations when mounted in an appropriate holder. How does the double-sided chipbreaker affect performance? A double‑sided chipbreaker provides consistent chip control and doubles the number of usable cutting edges per insert, improving economy and reducing tool change frequency. What mounting features does the insert have? The insert is supplied with a cylindrical hole for secure fastening; compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. Which coating and grade are applied to this insert? This item uses a PVD coating on a carbide substrate in grade AH8015, optimised for machining heat‑resistant materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 AT9530 Wendeplatten - Tungaloy
High-performance finishing insert with a focus on surface quality and predictable wear; features a coated cermet grade and a 0.4 mm corner radius for fine finishes. Its double-sided design and ISO compatibility reduce tooling costs and changeover time. Order the DNMG150604 AT9530 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150604 AT9530 — ISO turning insert for turning by Tungaloy A DNMG150604 AT9530 indexable insert engineered for finishing and light turning of steel, prioritising consistent surface finish and uniform wear characteristics. Coated cermet grade AT9530 Precision 0.4 mm corner radius Rhombic 55° geometry, 0° relief Double-sided chipbreaker, cylindrical hole Superior surface quality for finishing passes The coated cermet composition provides excellent tribological behaviour during low- to medium-depth finishing cuts, resulting in a consistent surface finish and reduced need for secondary operations. The combination of the coated cermet grade and the modest nose radius supports stable cutting in steel machining, so operators can achieve repeatable part quality. The insert thickness and edge geometry are optimised to deliver uniform wear rather than aggressive edge breakdown, which keeps tolerances stable across production batches. Cost-effective durability and predictable tool life Built on a robust carbide substrate, the insert offers good resistance to abrasive wear while the coating improves edge integrity in finishing applications. The double-sided chipbreaker design allows two indexings per insert, extending effective tool life and improving cost-per-part. Its balanced construction minimises vibration in steady-state turning, helping to protect the cutting edge and the workpiece surface; the result is fewer interruptions for tool change and a smoother production flow. Broad ISO compatibility and easy indexing As an ISO-standard turning plate, the DNMG format ensures compatibility with a wide range of external holders; fit is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The presence of a cylindrical hole and standard clamping interface simplifies secure mounting and precise location in the seat. With a 55° rhombic geometry and 0° relief angle, the insert suits external and internal turning set-ups where access and approach angles demand a compact nose and controlled cutting forces. Choosing the right grade and chipbreaker for the task The AT9530 grade is intended for finishing and light machining of steel, focusing on surface quality and even wear. When pairing the insert with a holder, select a chipbreaker and grade that match material, cut depth and machine rigidity; in unstable set-ups a gentler chipbreaker and smaller uncut chip thickness will reduce the risk of edge chipping. For applications that prioritise mirror-like surfaces or minimal machining marks, the modest 0.4 mm corner radius and the insert’s coating together help to lower built-in surface irregularities and improve first-pass acceptance rates. Contact Metav Werkzeuge for application-specific recommendations and to secure Tungaloy DNMG150604 AT9530 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773689 SKU: 6773689-Tungaloy Manufacturer SKU: TUN6773689 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Numbers / core technical data Inscribed size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Insert angle: 55° Relief angle: 0° Hole: with hole (cylindrical) Special features / designs Grade: AT9530 Coating: coated cermet Shape: rhombic Chipbreaker: double-sided Typical application: turning (finishing / light machining) Compatibility: ISO turning holders and clamping sets FAQ What materials is this insert optimised for? The DNMG150604 AT9530 insert is optimised for steel finishing and light machining, where the AT9530 coated cermet provides even wear and improved surface quality. Can the insert be used on both external and internal turning operations? Yes. The rhombic DNMG format and the 55° approach make the plate suitable for both external and internal turning applications when mounted in compatible ISO holders. How many indexings are available per insert? The insert features a double-sided chipbreaker, allowing two usable cutting edges per index, which increases effective tool utilisation compared with single-sided types. What are the key geometric values to consider when selecting a holder? Pay attention to inscribed size (15 mm), thickness (6.35 mm), corner radius (0.4 mm) and the 55° geometry; these determine seat fit, clearance and the correct fastening/clamping requirements. Is AT9530 a good choice for improving surface finish on turned parts? Yes. The AT9530 coated cermet grade is specifically aimed at finishing and light machining of steel, delivering improved surface finish and uniform wear characteristics. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 AT9530 Wendeplatten - Tungaloy
High-quality finishing performance from a coated cermet AT9530 grade combined with an ISO‑standard rhombic form delivers consistent wear and smooth integration into standard turning tool systems; order via Metav Werkzeuge or consult the technical team for holder compatibility. DNMG 150604 AT9530 rhombic indexable turning insert, 0.4 mm corner radius — Tungaloy DNMG150604 AT9530 is an ISO rhombic indexable insert intended for finishing and light turning of steel, designed to favour surface quality and even wear in production and small-series machining *ISO-standard rhombic insert for turning *Coated cermet grade AT9530 for fine finishing *0.4 mm corner radius for improved surface quality *Double-sided chipbreaker with cylindrical hole Consistent surface quality through coated cermet technology The AT9530 grade is a coated cermet designed specifically for finishing and light machining of steel, providing a balanced combination of toughness and wear resistance. The coating stabilises the cutting edge and promotes uniform wear, which helps maintain dimensional stability over multiple indexings. For production environments where repeatable surface finish is critical, the material pairing of a cermet substrate with a tailored coating reduces edge degradation and supports predictable tool life. ISO conformity and mechanical compatibility for reliable clamping As an ISO‑standard insert in DNMG shape, compatibility with toolholders depends on geometric parameters such as form, clearance angle, tolerance class, clamping method, size and thickness. The rhombic plate and cylindrical hole allow secure seating in many ISO holders designed for DNMG‑style inserts, while the specified 0° relief angle and 55° lead geometry contribute to cutting stability in finishing cuts. Specifying these parameters during holder selection ensures secure fixation and repeatable cutting performance. Productivity gains from geometry and chip control The double‑sided chipbreaker and the 0.4 mm corner radius combine to support smooth chip evacuation and a favourable contact pattern across the cutting edge. This geometry reduces cutting forces in light finishing passes and helps to protect the edge from thermal and mechanical shock. The insert’s carbide substrate provides the necessary support for the cermet coating, enabling productive machining with consistent results and lower risk of premature edge failure in suitable applications. Practical application notes and selection guidance Designed for both external and internal turning operations, the insert suits finishing and light machining of steel where surface quality and consistent wear behaviour are priorities. Selecting the correct chipbreaker and grade according to workpiece material, machining method and setup rigidity is essential for optimal results. For compatibility checks and advice on selecting the matching holder, clamping set and replacement screws, technical consultations are available to clarify mounting tolerances and operational limits. Contact Metav Werkzeuge for tailored application advice on Tungaloy inserts and compatibility verification with existing holders Technical data Article number: 6773693 Manufacturer SKU: TUN6773693 SKU: 6773693-Tungaloy Label: DNMG150604 AT9530 Tungaloy-Wendeplatte Facts Shape: rhombic (DNMG) Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Clearance angle: 0° Lead/approach angle: 55° Hole: with hole (cylindrical) Special features Coated cermet grade AT9530 Carbide substrate Double-sided chipbreaker ISO indexable turning plate (ISO DNMG150604) Suitable for finishing and light turning of steel Designed for secure clamping in compatible holders FAQ Which materials is this insert suited for? The DNMG150604 AT9530 insert is intended primarily for finishing and light machining of steel; the AT9530 coated cermet promotes high surface quality and uniform wear during these operations. Is the insert suitable for both external and internal turning? Yes, the indexable plate is suitable for external and internal turning when mounted in an appropriate DNMG-compatible holder and used with the recommended cutting data. What are the key dimensions to check for holder compatibility? Check the plate size (15 mm), thickness (6.35 mm), corner radius (0.4 mm), 0° clearance angle and the cylindrical hole style to ensure correct seating in the chosen holder. How does the AT9530 grade affect tool life and finish? The AT9530 coated cermet provides a stable cutting edge and even wear pattern, improving surface finish and offering predictable performance in finishing applications. Can the insert be indexed to use both sides? Yes, the design is double-sided; the chipbreaker allows use of both cutting edges before replacement, supporting cost-effective machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 GH330 Wendeplatten - Tungaloy
Take advantage of the GH330 wear-resistant grade combined with ISO DNMG compatibility for steady tool life and consistent turning results; the rhombic 55° geometry with a 0.4 mm corner radius gives predictable form control while the double-sided chipbreaker improves chip flow and reduces interruptions — order directly via Metav Werkzeuge or consult our team for application-specific recommendations. DNMG150604 GH330 DNMG turning insert for turning, Tungaloy The DNMG150604 GH330 is an ISO-compatible rhombic turning insert engineered for external and internal turning applications, offering a balance of wear resistance and edge stability in a compact, indexable format. ISO DNMG 150604 form, 55° rhombic angle GH330 grade for wear resistance and toughness 0.4 mm corner radius for precise turning Double-sided chipbreaker, cylindrical hole Consistent performance from a wear-resistant carbide grade The combination of GH330 and carbide substrate has been selected to deliver a reliable compromise between hardness and toughness for routine and semi-critical turning tasks. This composition supports extended tool life under fluctuating cutting conditions and reduces the frequency of index changes, which helps to maintain machining rhythm and lowers overall process costs. The grade’s balanced properties also assist in preserving edge integrity on medium-duty operations, making it suitable for workshops that prioritise productivity and repeatability. Precise geometry and secure seating for repeatable results Manufactured to the ISO DNMG form with a 55° included angle, the insert features a rhombic outline and a 0° clearance angle that suit tight-tolerance external and internal contours. The 0.4 mm corner radius contributes to dimensional control and helps to moderate cutting forces, while the 6.35 mm plate thickness ensures stable clamping. The presence of a cylindrical hole enables reliable fixation in compatible holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, and these parameters are designed to meet common ISO tooling systems for straightforward integration into existing setups. Effective chip control and application flexibility The double-sided chipbreaker design promotes consistent chip formation across a variety of steels and general turning tasks, improving surface finish and reducing the risk of recutting or chip entanglement. Selection of the appropriate chipbreaker and the GH330 grade should be matched to workpiece material and machining stability for optimal outcomes. For both roughing and finishing passes, this indexable insert supports efficient material removal while helping to preserve the cutting edge, which in turn contributes to predictable cycle times and reduced machine downtime. System readiness and practical workshop logistics The insert is intended to be used as part of a system comprising a suitable external holder or boring bar, an underlay/shim or clamping set, and replacement screws where required. Stocking the correct insert SKU and a small set of spare clamping components minimises production interruptions and streamlines tool changes. The item is supplied under Tungaloy manufacture and is identified by the manufacturer article number and SKU for ordering and inventory control, enabling quick procurement and traceability within tool management systems. Contact Metav Werkzeuge for tailored application advice and fast supply of genuine Tungaloy GH330 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and availability Technical data Article number: 6803545 SKU: 6803545-Tungaloy Manufacturer SKU: TUN6803545 Model series: ISO turning inserts Material: Carbide Facts Plate size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° Hole: with hole Hole style: cylindrical Special features Rhombic plate shape Double-sided chipbreaker GH330 grade For turning ISO DNMG 150604 form FAQ What materials is this insert suitable for? The GH330 Tungaloy turning insert is formulated for general turning tasks; selection of the chipbreaker and grade should be matched to the specific workpiece material and stability requirements. How is the insert mounted in a holder? The insert is designed for ISO-compatible holders; secure seating depends on form, clearance angle, tolerance class, fastening method, size and thickness as specified for DNMG fixtures. Is this an indexable insert and how many cutting edges are available? Yes, this is an indexable, double-sided insert so multiple edges are available before indexing or replacement is required. What identifiers assist with ordering and stock control? Use the manufacturer article number 6803545 and the SKU 6803545-Tungaloy or Manufacturer SKU TUN6803545 for precise ordering and inventory management. Can this insert be used for both external and internal turning? The geometry and chip control features make it suitable for both external and internal turning operations when paired with an appropriate holder and machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 GT9530 Wendeplatten - Tungaloy
Combining the GT9530 coated cermet with the DNMG150604 ISO geometry yields extended tool life and reliable surface quality for finishing and light universal turning; order directly via Metav Werkzeuge or request a compatibility check from the technical team. DNMG150604 GT9530 Tungaloy turning insert — ISO rhombic insert for finishing (Turning) DNMG150604 GT9530 Tungaloy insert is an ISO‑standard rhombic turning insert designed for finishing and light universal turning operations in steel. GT9530 coated cermet for extended tool life ISO DNMG form for universal holder compatibility Double‑sided chipbreaker with cylindrical hole 0° clearance angle and 55° approach geometry Consistent finishing performance under stable conditions The GT9530 grade is a coated cermet developed for wear‑resistant finishing to light universal turning of steel. In practice this means a longer service life and more consistent part quality when machining under steady, well‑supported conditions. The insert’s microstructure and coating focus on resisting flank wear and maintaining a fine cutting edge, which directly contributes to improved surface finish and fewer interruptions for tool changes. For production environments where repeatability and component quality matter, this combination delivers measurable efficiency gains. Secure clamping and proven ISO compatibility Thanks to the ISO DNMG geometry and rhombic shape, the insert matches a wide range of external holders and boring bars when the form, relief angle, tolerance class, fastening, size and thickness are respected. The rhombic design with a cylindrical hole and double‑sided layout offers two usable cutting edges per index, improving economics per edge. The insert’s 6.35 mm plate thickness and 0.4 mm corner radius provide a balance between stiffness and edge strength, making it suitable for stable turning set‑ups where rigidity and repeatable positioning are required. Grade and coating engineered for productivity The GT9530 cermet coating enhances wear resistance and is optimised for achieving good surface quality at cutting conditions suited to finishing. Unlike general‑purpose grades, this cermet focuses on reduced edge deterioration and stable chip formation, which can extend change intervals and support higher uptime. The double‑sided chipbreaker geometry helps control chip flow and evacuation, reducing the risk of rework due to chip interference. Taken together, these features support improved productivity and predictable tool life in repetitive turning operations. Practical selection and integration guidance When choosing an insert, match the ISO designation and check holder compatibility first; the DNMG form requires a corresponding holder seat and correct clamp size. For best results keep the setup stable and select feeds and speeds that favour finishing rather than heavy stock removal. If roughing and finishing are both required in one toolpath, select a chipbreaker and grade suited to the most demanding operation or plan staged tool changes. For questions about specific holder matches or to confirm the correct tolerance class, consult the supplier documentation or Metav Werkzeuge’s technical advisers. Request a compatibility check or place an order through Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com — for tailored advice on integrating DNMG150604 GT9530 inserts into existing turning systems Technical Data Article number: 6998079 Manufacturer SKU: TUN6998079 SKU: 6998079-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Approach angle: 55° Clearance angle: 0° Special features Grade/coating: GT9530 (coated cermet) Material: cemented carbide Shape: rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (finishing to light universal) Compatibility: ISO DNMG form, fits matching holders FAQ What materials is this insert suitable for? The GT9530 grade is formulated for machining steel; the DNMG150604 geometry is recommended for finishing and light universal turning of steel under stable conditions. Is the insert double‑sided and how many indexable edges are available? The DNMG insert features a double‑sided chipbreaker and a cylindrical hole, providing two usable cutting edges per side when indexed correctly. How does the GT9530 coating affect performance? The GT9530 coated cermet enhances wear resistance and edge life, helping to maintain a superior surface finish and longer tool intervals in finishing applications. How to verify holder compatibility for this ISO insert? Compatibility depends on the DNMG form, relief/clearance angle, tolerance class, fastening method, size and thickness; check the holder specifications against these parameters before ordering. Can this insert be used for roughing operations? This insert is optimised for finishing to light universal turning; for heavy roughing, a dedicated roughing grade and chipbreaker are generally recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 GT9530 Wendeplatten - Tungaloy
Take advantage of a coated cermet grade GT9530 and the ISO rhombic form for consistent finishing and prolonged tool life; combine this with the secure cylindrical-hole fixing and double-sided chipbreaker for reliable, indexable performance. Order DNMG150604 GT9530 turning inserts via Metav Werkzeuge or request tailored advice from our consultants. DNMG 150604 GT9530 turning insert – coated cermet for finishing by Tungaloy DNMG150604 GT9530 is a finishing to light universal indexable turning insert designed for stable machining of steel in external and internal turning applications Coated cermet grade GT9530 for extended tool life Double-sided chipbreaker for reliable chip control ISO rhombic DNMG 150604, 6.35 mm plate thickness Achieve consistent surface quality with a wear-resistant cermet grade The GT9530 grade is a coated cermet engineered for finishing and light universal machining of steel, delivering a fine surface finish and reduced wear under stable cutting conditions. Cermet combines ceramic hardness with metallic toughness; the coating further improves wear resistance and reduces built-up edge, which translates into fewer interruptions and more predictable batch outcomes. For operations where surface integrity and repeatable finish are priorities, this material pairing reduces rework and improves first-pass yield. Secure ISO compatibility and straightforward indexing for process stability Supplied as an ISO-standard rhombic insert, the geometry and dimensions align with common toolholder systems so compatibility hinges on form, clearance angle, tolerance, clamping method, size and thickness. The insert’s rhombic shape, 0° clearance, cylindrical mounting hole and double-sided design permit straightforward indexing and secure fixing; the 6.35 mm plate thickness and 0.4 mm corner radius offer robustness where minor edge strength matters. This reduces downtime for changeover and supports stable cutting forces when paired with appropriate holders. Improved chip control and predictable machining performance A double-sided chipbreaker gives controlled chip formation in the finishing range, aiding uninterrupted chip evacuation and consistent cutting conditions. In combination with the fine-grained cermet substrate, chip control supports uniform tool wear and stable dimensional results across production runs. Selecting this insert for turning operations can lower process variability and simplify parameter optimisation, resulting in shorter setup times and steady cycle times for repeated components. Practical system considerations and recommended use The typical system comprises the indexable insert, a compatible outer holder or boring bar, a shim or clamping set and the matching screws. DNMG150604 GT9530 is best applied in turning tasks where a quality surface and extended tool life under stable conditions are required; it is suitable for both external and internal turning when combined with the correct chipbreaker and holder rigidity. For customers seeking to integrate the insert into existing tool systems, specifying the ISO geometry and providing holder details ensures a precise fit and predictable performance. Contact Metav Werkzeuge for application-specific recommendations, availability of the Tungaloy DNMG150604 GT9530 turning inserts and guidance on holder compatibility Technical data Article number: 6998075 Manufacturer SKU: TUN6998075 Manufacturer article number: 6998075 Model series: ISO turning inserts Designation: DNMG150604 GT9530 Facts Plate size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Clearance angle: 0° Approach angle: 55° Special features Coated cermet grade GT9530 Double-sided chipbreaker Rhombic form (DNMG) Cylindrical mounting hole Suitable for turning of steel Carbide substrate ISO-compatible geometry FAQ What machining tasks is this insert best suited for? The DNMG150604 GT9530 insert is intended for finishing to light universal turning of steel, delivering improved surface finish and longer tool life in stable cutting conditions. How does the GT9530 cermet compare to conventional carbide grades? GT9530 is a coated cermet optimised for finishing: it offers higher hot hardness and reduced built-up edge compared with many cemented carbides, resulting in superior surface quality for the same cutting parameters. Can the insert be indexed to use both cutting edges? Yes, the DNMG150604 is double-sided with a secure cylindrical-hole fixing, enabling indexing to extend service life and reduce tooling change frequency. Which holder characteristics are important for best results? Use a rigid, ISO-compatible toolholder matched to the DNMG geometry, ensuring correct clamping, tolerance class and clearance angle to maintain the designed cutting conditions for the GT9530 grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 KS05F Wendeplatten - Tungaloy
Take advantage of a proven combination of ISO compatibility, Tungaloy KS05F cutting grade and a compact 55° rhombic geometry for consistent turning performance; order availability and application advice are provided via Metav Werkzeuge or consult their experts for process integration. DNMG 150604 KS05F Tungaloy indexable turning insert — 55° rhombic, 0.4 mm radius DNMG 150604 KS05F Tungaloy indexable turning insert for ISO-compliant external and internal turning operations, engineered to balance wear resistance and edge stability for reliable production. ISO-format DNMG insert, rhombic geometry Tungaloy KS05F cutting grade for stable edges Double-sided chipbreaker for bidirectional use Cylindrical hole for secure clamping Reliable wear control and consistent tool life for production turning The combination of an ISO DNMG format and the KS05F cutting grade provides a predictable balance between wear resistance and toughness. The specified grade complements the insert geometry to reduce flank and crater wear under varied turning conditions. For operations that prioritise uptime, this balance results in fewer unscheduled index changes and more consistent part quality. The insert is manufactured from cemented carbide, which supplies the hardness required to resist abrasive wear while maintaining the necessary edge stability for steady cutting forces. Fast fitment and lower setup variability through standardised compatibility Compatibility with a wide range of toolholders is defined by insert form, clearance (relief) angle, tolerance class, clamping arrangement, size and thickness. The flat rhombic shape with a cylindrical hole and a 0° relief ensures a repeatable interface with DIN/ISO DNMG holders and appropriate boring bars. Because the system is composed of the insert, a matching external holder or boring bar, a shim/clamping set and replacement screws, maintenance becomes straightforward and tool-change times are reduced. The double-sided chipbreaker design enables two indexed cutting edges per side, improving economy and reducing inventory complexity. Geometry choices that influence surface finish and process stability The 0.4 mm corner radius and the 55° wedge angle are decisive for the achievable surface finish and the insert’s mechanical strength. A 0.4 mm radius supports medium to fine turning applications where edge strength and a uniform finish are required; it moderates cutting forces while maintaining an acceptable corner robustness. The 6.35 mm thickness contributes to mechanical rigidity in cantilevered setups, lowering vibration and improving dimensional repeatability. Selecting the correct chipbreaker and insert geometry for the component material and the machining strategy is essential: the KS05F grade is tailored to deliver stable cutting edges across a broad range of steels and common workpiece materials used in turning. Practical benefit: predictable performance and simple inventory logic Using an ISO-standardised insert format simplifies tooling logistics: holders, spares and replacement screws align with established industrial practices, reducing the number of special items carried in stock. The KS05F grade from Tungaloy focuses on repeatable performance and consistent edge life, which supports production planning and cost-per-part calculations. Technical teams benefit from clear parameters—size, thickness, corner radius and relief angle—that allow straightforward calculation of cutting data and process windows. Where process security and surface quality matter, this specification reduces variability and supports sustained productivity. Contact Metav Werkzeuge for application-specific advice and availability of the Tungaloy KS05F DNMG 150604 insert; their specialists can recommend holder combinations and batch supply options to fit the production requirement. Technical Data Article number: 6934803-Tungaloy Manufacturer SKU: TUN6934803 Manufacturer article number: 6934803 Model series: ISO turning indexable inserts Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Wedge angle: 55° Relief (free) angle: 0° ISO designation: 150604 Special features Material: cemented carbide Cutting grade: KS05F (Tungaloy) Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) System components: insert, holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The DNMG 150604 KS05F insert is designed for turning and, combined with its KS05F grade, offers broad material coverage—particularly steels and common turning alloys—providing a good balance of wear resistance and edge stability for general turning tasks. How does the KS05F grade affect productivity? The KS05F cutting grade enhances edge stability and wear behaviour, which helps to extend index life and reduce the frequency of insert changes, thereby supporting more consistent cycle times and improved process uptime. Can the insert be used both sides before indexing? Yes, the double-sided chipbreaker and rhombic geometry allow multiple usable cutting edges; the specification enables economic use of the insert by indexing both sides where the geometry matches the holder and operation. Which holder features are critical for secure clamping? Secure clamping depends on matching insert form, relief angle, tolerance class, clamping method and size; the cylindrical hole and standard DNMG shape ensure repeatable seating in compatible holders or boring bars. What performance can be expected regarding surface finish? With the 0.4 mm corner radius and appropriate cutting data, the insert supports medium to fine surface finishes while maintaining sufficient edge strength for stable turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 NS520 Wendeplatten - Tungaloy
Reliable finishing performance and consistent wear characteristics are provided by the combination of the NS520 cermet grade and the precise 0.4 mm corner radius, enabling improved surface quality and dimensional stability in turning operations; order the inserts directly via Metav Werkzeuge or consult the team for selection support. DNMG 150604 NS520 — Turning indexable insert DNMG150604 by Tungaloy DNMG150604 NS520 is an ISO-format indexable insert for turning, designed for fine finishing and light machining of steel with a focus on surface integrity and repeatable dimensional accuracy. DNMG150604 format, 55° lead angle NS520 cermet for fine finishing Double-sided chipbreaker, cylindrical hole Precision finishing and consistent wear for turning The NS520 grade is a cermet or coated cermet designed specifically for finishing to light machining of steel, delivering an improved surface finish and uniform flank wear. Cermet combines ceramic hardness with metallic toughness, which reduces built-up edge and stabilises cutting performance; this makes the insert particularly suitable where surface integrity and dimensional control are priorities. The rhombic geometry with a 55° lead angle supports stable external and internal turning processes while the 0.4 mm corner radius helps to achieve consistent edge strength without sacrificing fine finish. Compatibility and system requirements explained Compatibility with toolholders is determined by the insert’s form, clearance angle (0°), tolerance class, mounting feature, size and thickness. The DNMG-format insert requires a matching external holder or boring bar together with a shim/clamp set and replacement screws for a correct clamping system. Inserts are ISO-standard, which simplifies selection when holders are specified by form and size; however, the chosen holder must accept an insert with a 6.35 mm thickness, an inscribed circle of 15 mm, and a cylindrical hole for secure fixing and repeatable positioning. Practical advantages of the chipbreaker and geometry The double-sided chipbreaker on this insert promotes reliable chip control in finishing feeds, directing chips away from the workpiece and supporting stable cutting conditions. As the grade is intended for fine turning, predictable chip formation contributes to longer tool life and reduced surface rework. The rhombic plate form allows economical use of both sides of the insert, halving index costs per cutting edge under suitable process parameters. Selecting cutting data and expected outcomes When matched with appropriate speeds, feeds and stable clamping, the cermet composition of the NS520 grade enables improved surface roughness and repetitive dimensional results. For customers less familiar with the material, cermet inserts typically favour moderate cutting speeds and light depths of cut for finishing passes; this approach exploits the material’s wear resistance while preserving edge integrity. The result is a balance of productivity and finish quality that is especially advantageous in batch production and precision components. Contact Metav Werkzeuge for advice on integrating Tungaloy DNMG150604 NS520 inserts into production, availability and optimised cutting parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements Technical data Article number: 6803551 Manufacturer article number: 6803551 SKU: 6803551-Tungaloy Manufacturer SKU: TUN6803551 Brand: Tungaloy Model series: ISO turning inserts Type designation: DNMG150604 Application: Turning Numerical data Inscribed circle / size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Lead angle: 55° Clearance angle: 0° Hole style: cylindrical hole Special features Grade: NS520 (cermet / coated cermet) Substrate: cemented carbide Plate form: rhombic Chipbreaker: double-sided With cylindrical hole for secure fixing ISO-standard turning insert Intended for finishing to light machining of steel Compatible with matching holder, shim/clamp set and replacement screws FAQ What holders are compatible with this DNMG insert? Compatibility is based on the insert form, clearance angle, tolerance class, mounting type, size and thickness; the DNMG150604 NS520 insert fits holders specified for DNMG standard inserts and requires a matching shim/clamp arrangement. Is NS520 suitable for roughing operations? The NS520 grade is optimised for finishing to light machining on steel; for heavy roughing a more robust grade or alternative geometry would typically be recommended instead of the DNMG150604 NS520 insert. How many usable cutting edges are available per insert? The DNMG150604 format is double-sided; each side provides usable cutting edges according to the insert indexing practice, allowing economical use of the plate for finishing applications. What are the main benefits of the cermet grade on this insert? Cermet, as used in the NS520 grade, offers enhanced wear resistance and stable edge behaviour that contribute to improved surface finish and repeatable dimensional control when the DNMG150604 insert is applied under suitable finishing parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 NS9530 Wendeplatten - Tungaloy
The supplied data contains inconsistent material specifications that prevent a reliable product description being produced. One entry identifies the grade NS9530 as an uncoated cermet intended as a finishing grade for turning steel, noting a sharp cutting edge and suitability for continuous cuts and small depths; another entry lists the tool material as carbide. Cermet and carbide are distinct cutting-material classes with different substrate and performance characteristics, so both cannot simultaneously apply to the same item. Because of this contradiction, a complete and accurate product text cannot be generated from the current data set. Please clarify whether the insert is a cermet (NS9530) or a carbide substrate, and confirm related technical details such as coating status and substrate material so a full specification and marketing description can be prepared.
DNMG 150604 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of reliable finishing performance, NS9530 uncoated cermet sharpness and ISO compatibility to secure consistent surface quality in serial turning operations; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. DNMG150604 NS9530 Turning insert — uncoated cermet finish grade, 0.4 mm radius — Tungaloy DNMG150604 NS9530 turning insert for finishing steel, designed for ISO-standard tool systems and continuous light cuts Uncoated cermet for fine finishing Sharp cutting edge for low cutting forces ISO DNMG 150604 format for standard holders Double-sided chipbreaker, cylindrical hole High-quality finishing with low cutting forces The NS9530 finish grade is an uncoated cermet developed for low cutting forces and superior surface quality on steel. As a finishing insert, it provides a sharp cutting edge that reduces built-up edge and helps achieve consistent micrometre-level surface finishes during continuous cuts and small depths of cut. For operations where predictable part quality and reduced rework are priorities, this grade delivers tangible process benefits and improved cycle reliability. Designed for straightforward integration into ISO systems Manufactured to the ISO DNMG specification, the rhombic insert offers straightforward compatibility with standard turning holders; fit is governed by form, relief angle, tolerance class, fixing method, size and thickness. The plate’s rhombic form, 0° relief angle and cylindrical hole enable stable clamping and indexing. A 0.4 mm corner radius supports fine-detail finishing without sacrificing rigidity, and the double-sided geometry allows economical indexing. Operational advantages that support productive turning Built on a hardmetal body with the NS9530 cutting grade, the insert is optimised for continuous finishing of steel, reducing cutting forces and machine load while maintaining a high surface finish. Stable chip control from the double-sided chipbreaker helps avoid interruptions and extends productive run lengths. Choosing this insert contributes to process stability, predictable tool life and overall cost-efficiency in series production. Contact Metav Werkzeuge for application-specific recommendations on Tungaloy finishing inserts or request sample machining parameters by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6944600-Tungaloy Manufacturer SKU: TUN6944600 Manufacturer article no.: 6944600 Model series: ISO-Drehwendeschneidplatten Product name: DNMG150604 NS9530 Tungaloy-Wendeplatte Core specifications Insert designation: DNMG150604 ISO code: 150604 Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Relief angle: 0° Approach/lead angle: 55° Hole style: cylindrical hole Chipbreaker: double-sided Design & special features Material: Hartmetall Cutting material: uncoated cermet NS9530 Application: Turning (finishing steel) Plate form: rhombic ISO-standard insert for DNMG holders Compatible with standard clamping sets and screws FAQ What machining tasks suit this DNMG150604 NS9530 insert best? The DNMG150604 NS9530 Tungaloy insert is optimised for finishing operations on steel where low cutting forces and a high surface finish are required, particularly for continuous cuts and small depths of cut. Can the insert be indexed to use both sides? Yes, the insert is double-sided with a cylindrical hole and can be indexed to present a fresh cutting edge, maximising usable life per insert. Which holders are compatible with this ISO-format insert? Standard DNMG-format turning holders that accept ISO DNMG 150604 inserts will be compatible, provided form, relief angle and thickness match the holder specifications. How does the uncoated cermet NS9530 compare to coated grades for finishing? The uncoated cermet NS9530 offers a sharper edge and excellent surface finish for steel finishing; it reduces the tendency to form a built-up edge and is particularly effective for fine, continuous cutting operations. Is this insert suitable for interrupted cuts or heavy roughing? This grade and geometry are intended for finishing; for interrupted cuts or heavy roughing, a more robust grade or different geometry should be selected to withstand higher impact and larger depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 NS9530 Wendeplatten - Tungaloy
Benefit from a precision finishing solution that combines low cutting forces and excellent surface quality with robust carbide construction; ideal for continuous cuts and small depths of cut. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG 150604 NS9530 Tungaloy — Indexable turning insert, uncoated cermet, 55° geometry DNMG150604 NS9530 Tungaloy is an indexable turning insert designed for fine finishing of steel components in external and internal turning operations Uncoated cermet for fine finishing 55° rhombic geometry for versatility 0° relief angle for precision Cylindrical hole for secure clamping High-quality finishing with low cutting forces The DNMG150604 NS9530 delivers a finishing-grade cutting performance thanks to its uncoated cermet composition. The grade is engineered for low cutting forces and a high surface finish, which reduces the need for secondary operations and shortens process chains. For continuous cutting and small depths of cut, this insert provides consistent results and helps maintain dimensional tolerances, making it suitable for batch production and precision components where surface integrity matters. Holder compatibility and secure clamping for repeatable results Compatibility with toolholders is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic 55° geometry and the cylindrical hole ensure reliable seating and clamping in standard indexable holders and boring bars. When mounted with the correct backing shim and screw set, the insert offers stable chip control and repeatable positioning, which supports process reliability and reduces setup time on the machine. Application guidance and process benefits As a finishing grade for steel, the insert excels in achieving fine finishes on shafts, housings and turned profiles. The double-sided chipbreaker supports continuous cuts and stable chip formation, while the 0° relief aids in achieving a sharp cutting edge for minimal cutting resistance. Select this insert where surface quality and dimensional consistency are priorities; pairing it with a rigid setup and appropriate speeds will maximise tool life and part quality. For availability and tailored recommendations for Tungaloy NS9530 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and order support Technical Data Designation: DNMG150604 NS9530 Manufacturer item number: 6998153 SKU: 6998153-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Material: Carbide Core data Corner radius: 0.4 mm Relief angle: 0° Included angle: 55° Thickness: 6.35 mm Inscribed circle/size: 15 mm Hole: with cylindrical hole Special features Uncoated cermet grade NS9530 for finishing steel Double-sided chipbreaker ISO-compliant DNMG150604 geometry Rhombic insert shape Compatible with holders matching form, clearance, tolerance, fastening, size and thickness Application: external and internal turning; finishing for steel Typical use: continuous cuts and small depths of cut FAQ Which materials is this insert best suited for? The DNMG150604 NS9530 Tungaloy insert is a finishing grade optimised for machining steel, delivering high surface quality and low cutting forces for continuous cutting. Is the insert indexable on both sides? Yes, the insert features a double-sided chipbreaker, allowing multiple indexed cutting edges and efficient utilisation of the insert. What holder specifications must be observed for correct fitment? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; the insert requires a matching ISO DNMG seat and correct clamping components. Which cutting conditions are recommended for this grade? This finishing grade performs best with moderate cutting speeds, continuous cuts and small depths of cut to exploit the low cutting forces and achieve superior surface finish. How is the insert secured in the holder? The DNMG150604 is supplied with a cylindrical hole for secure clamping; use the appropriate backing shim, clamp set and screw to ensure stable fixation and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 uncoated cermet grade and the proven ISO geometry for consistent finishing results; compatibility with standard ISO holders ensures quick insertion and replacement. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. DNMG 150604 NS9530 indexable turning insert — uncoated cermet finishing grade by Tungaloy DNMG150604 NS9530 is a precision indexable turning insert designed for fine finishing of steel components in ISO-compliant turning systems DNMG 150604 form, rhombic 55° geometry Uncoated cermet grade NS9530 for fine finishing Double-sided chipbreaker for continuous cuts 0.4 mm corner radius for superior surface finish High-quality finishing with a low-force cutting grade The NS9530 uncoated cermet is engineered as a finishing grade for steel, delivering a sharp cutting edge and reduced cutting forces. That combination reduces vibration and minimises the need for subsequent passes, producing a finer surface directly from the lathe. For manufacturing environments where surface integrity and dimensional stability matter, this insert provides a measurable improvement in final part quality and consistency. ISO-based geometry and straightforward holder compatibility The DNMG 150604 format follows ISO conventions with a 55° rhombic geometry and a cylindrical central hole, so compatibility with external holders depends on form, clearance angle, tolerance class, fastening and size. The 6.35 mm plate thickness and standard dimensions allow straightforward replacement in existing tool systems, while the rhombic shape supports both external and internal turning. This clarity reduces setup time and aids process planning for production runs. Stable chip control for continuous cutting operations Equipped with a double-sided chipbreaker, the insert supports continuous cutting conditions and helps to control chip formation in uninterrupted machining. The tuned chip control reduces interruptions, protects the workpiece surface and contributes to more consistent tool life. Selecting the correct chipbreaker and the NS9530 grade for the material and cutting strategy enhances productivity and reduces scrap rates in series production. Practical geometry for fine-detail work and predictable results With a 0.4 mm corner radius and a 6.35 mm plate thickness, the insert is optimised for small depths of cut and finishing passes where surface quality is the priority. The composition on a cemented carbide body with a cermet cutting grade balances edge stability with wear resistance, making the component suitable for continuous, high-quality finishing of steel. The predictable cutting behaviour simplifies process parameter selection and reduces trial-and-error during setup. For application advice or to secure stock of the Tungaloy DNMG150604 NS9530 finishing insert, contact Metav Werkzeuge for tailored recommendations and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998150 SKU: 6998150-Tungaloy Manufacturer SKU: TUN6998150 Brand: Tungaloy Facts ISO designation: 150604 Angle: 55° Corner radius: 0.4 mm Plate thickness: 6.35 mm Size: 15 mm Special features Uncoated cermet grade NS9530 Rhombic plate form (DNMG) Double-sided chipbreaker Cylindrical hole for fastening Suitable for external and internal turning Cemented carbide body FAQ What applications is this insert best suited for? The DNMG150604 NS9530 Tungaloy indexable turning insert is best suited for finishing operations on steel, providing low cutting forces and high surface quality for external and internal turning. How does the NS9530 grade affect machining performance? The NS9530 uncoated cermet grade on the Tungaloy DNMG150604 insert offers a sharp cutting edge and reduced cutting forces, which helps to improve surface finish and reduce the number of finishing passes. Is the DNMG150604 compatible with standard ISO holders? Compatibility depends on holder form, clearance angle, tolerance class and fastening; the DNMG150604 conforms to ISO geometry, facilitating use with standard ISO turning holders when specifications match. What chip control can be expected during continuous cuts? The double-sided chipbreaker on the DNMG150604 NS9530 insert is designed to support continuous cutting by improving chip formation and reducing interruptions during machining. Which workpiece materials can be machined with this insert? The DNMG150604 NS9530 insert is optimised for steel finishing; choose the chipbreaker and cutting parameters according to the specific steel grade and machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T5105 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade T5105, a 55° rhombic geometry and a 0.4 mm corner radius delivers reliable high-speed performance for cast-iron turning while maintaining surface quality and tool life; order the inserts directly via Metav Werkzeuge or contact our consultants for tailored guidance. DNMG150604 T5105 – ISO turning insert for high-speed cast-iron machining, Tungaloy The DNMG150604 T5105 is an ISO rhombic turning insert designed for external and internal turning, optimised for high-speed machining of cast iron under stable cutting conditions CVD-coated carbide grade T5105 Optimised for high-speed cast-iron turning 55° rhombic geometry for stable cutting Cylindrical hole and secure clamping Consistent wear resistance for productive high-speed turning The CVD-coated carbide of grade T5105 provides a hard, thermally stable surface that reduces flank wear during extended high-speed cycles. This coating enhances abrasion resistance and supports higher cutting speeds compared with uncoated grades, resulting in longer intervals between index changes. For abrasive materials such as cast iron, this translates into a lower cost per part and more predictable tool performance. Geometry and dimensions that improve surface finish and process control A 55° rhombic geometry combined with a 0.4 mm corner radius offers a balance between edge strength and the capability to achieve fine surface finishes. The plate thickness of 6.35 mm and a nominal size of 15 mm ensure rigidity in most ISO-compatible holders, reducing vibration and improving dimensional accuracy. The negative angle combined with the geometry supports controlled chip flow and stable cutting forces. Secure clamping and system compatibility for reliable production The insert features a cylindrical hole and a standard ISO form, so compatibility with the toolholder depends on form, clearance angle, tolerance class, mounting method, size and thickness. A correctly matched holder, undersupport shim and clamping screw ensure repeatable seating and torque retention. Using the appropriate seat and clamping hardware prevents movement during interrupted cuts and contributes to consistent repeatability in batch production. Practical guidance on chip control and application choice This double-sided insert with a doppelseitig chipbreaker design is intended to be paired with a chipbreaker and grade chosen according to workpiece material, machining type and machine stability. For roughing on stable set-ups the grade's abrasion resistance supports higher feed rates; for finishing, the 0.4 mm corner radius helps achieve the required surface quality while preserving tool life. Select feeds and speeds to match the insert’s strengths for best results. For application-specific recommendations or to source the Tungaloy DNMG150604 T5105 inserts, contact Metav Werkzeuge for detailed process advice and supply options Technical data Article number: 6852974 Manufacturer SKU: TUN6852974 SKU: 6852974-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Geometry angle: 55° Plate size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.4 mm Clearance angle: 0° ISO designation: 150604 Special features CVD-coated carbide grade T5105 Rhombic plate form (DNMG) Cylindrical hole for clamping Double-sided chipbreaker Intended use: turning Typical application: external and internal turning Optimised for cast iron machining ISO-standard indexable insert FAQ What materials is this insert best suited to? The DNMG150604 T5105 insert (Tungaloy, SKU 6852974-Tungaloy) is optimised for high-speed machining of cast iron and performs best under stable machining conditions. How does the 55° geometry affect cutting performance? A 55° rhombic geometry provides a compromise between strength and access to profiles; it promotes stable cutting and improved surface finish in turning operations. Is the insert compatible with standard ISO holders? Compatibility depends on form, clearance angle, tolerance class, mounting, size and thickness; the DNMG150604 fits holders designed for ISO rhombic inserts with a cylindrical hole and matching seat. What advantages does the T5105 coating provide? The CVD-coated T5105 grade increases abrasion resistance and thermal stability, enabling higher cutting speeds and more consistent tool life in abrasive applications like cast iron. Which corner radius is recommended for finishing? A 0.4 mm corner radius offers fine finishing capability while maintaining edge strength; use reduced feeds for best surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T5105 Wendeplatten - Tungaloy
Robust CVD-coated carbide T5105 combined with a 55° rhombic geometry and a double-sided chipbreaker delivers stable, high-speed turning of cast iron under predictable conditions; the cylindrical locating hole and ISO conformity ensure secure clamping and uncomplicated integration into existing tool systems. Order the DNMG150604 T5105 directly via Metav Werkzeuge or consult the company’s specialists for tailored application advice. DNMG150604 T5105 — Tungaloy turning insert, CVD-coated carbide, 55° rhombic DNMG150604 T5105 is a rhombic 55° turning insert designed for high-speed machining of cast iron, compatible with ISO-indexable turning systems. CVD-coated carbide grade T5105 55° rhombic geometry for versatile turning Double-sided chipbreaker for reliable chip control Cylindrical hole, ISO-compatible High-speed performance tailored to cast iron The CVD-coated carbide grade T5105 is formulated for wear resistance and thermal stability during elevated cutting speeds typically required for cast-iron turning. The CVD layer reduces flank and crater wear by providing a hard, thermally resistant surface while the cemented carbide substrate maintains toughness; this combination extends tool life under stable machining conditions. The result is fewer indexings, more consistent cycle times and predictable tool-change intervals — all factors that support efficient production planning. Geometry and mounting that simplify set-up The 55° rhombic geometry with a 0.4 mm corner radius offers a balance between strength and finishing capability for external and internal turning operations. The insert’s cylindrical locating hole and ISO-compliant dimensions enable straightforward seating in standard external holders or boring bars, with compatibility determined by form, relief angle, tolerance class, fastening and thickness. Clear geometric standards mean repeatable clamping and minimal set-up variance, which helps maintain consistent part quality across shifts. Reliable chip control and surface quality Equipped with a double-sided chipbreaker, the insert is optimised for dependable chip formation when machining cast iron under stable fixtures. Controlled chip breakage reduces entanglement and supports uninterrupted machining cycles, while the combination of coating and edge preparation contributes to improved surface finish and reduced need for subsequent operations. The design supports steady chip flow, lowering the risk of tool damage and enabling more predictable process outcomes. Integration into production workflows As an ISO-series indexable plate, this insert is intended for use within a complete tool system comprising an ISO-compatible external holder, a clamping set and replacement screws. Selection of the correct chipbreaker style and grade should align with workpiece material, cutting parameters and machine rigidity. Documentation of grade T5105, plate dimensions (15 mm inscribed circle, 6.35 mm thickness) and edge radius simplifies procurement and tool management, making the insert suitable for batch production where reproducibility and uptime are priorities. For reliable high-speed cast-iron turning with Tungaloy quality, contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850214 Manufacturer SKU: TUN6850214 Market SKU: 6850214-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Numbers Insert size (inscribed circle): 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Included angle: 55° Relief (free) angle: 0° Special features Grade: T5105 (CVD-coated carbide) Shape: rhombic (DNMG) Hole: cylindrical, with hole Chipbreaker: double-sided Compatibility: ISO-indexable turning systems FAQ What materials is this insert suitable for? The DNMG150604 T5105 is specified for high-speed machining of cast iron; the CVD-coated T5105 grade is optimised for wear resistance during cast-iron turning. Which geometry and edge radius does the insert offer? The plate uses a 55° rhombic geometry with a 0.4 mm corner radius, designed to balance edge strength and surface finish for external and internal turning operations. How is the insert clamped in the holder? Clamping compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the DNMG150604 features a cylindrical locating hole to seat securely in ISO-compatible holders. Is the chip control suitable for automatic production? Yes, the double-sided chipbreaker on the T5105 grade provides predictable chip formation and reliable chip control, supporting continuous, automated machining cycles. What identification helps with procurement and tool management? Use the manufacturer article number 6850214 and manufacturer SKU TUN6850214 when ordering or logging the DNMG150604 T5105 insert to ensure correct grade and geometry are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com