DNMG 150604 T5115 Wendeplatten - Tungaloy
Take advantage of the ISO conformity and the CVD‑coated carbide T5115 for a reliable balance of wear resistance and edge stability in cast‑iron turning. The rhombic geometry and 0° relief ensure predictable seating and repeatable performance; order via Metav Werkzeuge or request expert advice for holder compatibility. DNMG 150604 T5115 turning insert — Tungaloy (ISO 150604) DNMG150604 T5115 Tungaloy turning insert for ISO‑standard external and internal turning, designed as a universal grade for cast iron applications ISO rhombic insert DNMG 150604 CVD‑coated carbide grade T5115 Universal performance for cast iron Double‑sided chipbreaker with hole Reliable ISO fit for straightforward integration The ISO designation guarantees that the rhombic insert matches established form and tolerance classes, which simplifies toolholder selection and reduces setup time. Compatibility is determined by insert form, relief angle, tolerance class, fastening type, size and thickness; the standardised geometry therefore helps to achieve consistent seating and repeatable positioning in production environments. This reduces process variability and supports shorter tool‑change cycles in workshops and small series production. Balanced wear resistance and edge stability for cast iron The T5115 grade is a CVD‑coated carbide developed as a universal solution for cast iron, offering a compromise between wear resistance and edge stability. The coating enhances high‑temperature performance and reduces adhesive wear, while the substrate provides toughness against chipping. With a double‑sided chipbreaker and a cylindrical hole for secure fastening, the insert supports stable cutting conditions and improved surface quality on interrupted and continuous cuts. Practical system guidance for turning operations A reliable turning system comprises the indexable insert, a compatible external holder or boring bar, a support shim or clamping kit, and spare screws. The DNMG‑style rhombic shape (size 15, thickness 6.35 mm) and a small 0° relief make the insert suitable for both external and internal turning when the correct chipbreaker and grade are matched to the workpiece and machine rigidity. Process planners benefit from the predictable behaviour of a CVD‑coated grade in high‑material‑removal tasks and finishing passes, while production teams profit from the insert’s repeatable seating and ease of replacement. For technical consultation on holder compatibility, chipbreaker selection or batch supply of Tungaloy turning inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for application‑specific advice and delivery options. Technical Data Article number: 6850215 Manufacturer SKU: TUN6850215 SKU: 6850215-Tungaloy Series: ISO‑Drehwendeschneidplatten Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Relief angle: 0° Insert angle: 55° Special features ISO designation: DNMG150604 Grade / coating: T5115, CVD‑coated carbide Shape: rhombic Hole style: cylindrical hole (with hole) Chipbreaker: double‑sided Typical application: turning (external and internal) Material: carbide FAQ Is this insert suitable for cast‑iron turning? The DNMG150604 T5115 Tungaloy turning insert is specified as a universal grade for cast iron, offering a balanced combination of wear resistance and edge stability suited to grey and ductile cast‑iron turning. How many cutting edges are available per insert? With a double‑sided design, the insert provides two usable edges per side where applicable according to mounting; indexing frequency depends on application and wear. Which holders are compatible with this DNMG insert? Compatibility is governed by ISO form, relief angle, tolerance class, fastening and thickness; holders designed for DNMG 150604 inserts and matched fasteners are required for correct seating. What are the key dimensions to check when replacing an insert? Check the ISO code (150604), size (15 mm), thickness (6.35 mm), corner radius (0.4 mm) and the relief angle (0°) to ensure a correct replacement. Does the CVD coating improve tool life under interrupted cuts? The CVD‑coated carbide substrate enhances wear resistance at elevated temperatures and contributes to improved edge life, particularly in continuous high‑temperature sections; however, toughness and machine stability remain decisive under heavy interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide for enhanced wear resistance, a universal grade optimised for cast iron, and ISO-standard geometry for reliable toolholder compatibility — order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150604 T5115 Tungaloy indexable turning insert — CVD-coated carbide, 55° rhombic geometry DNMG150604 T5115 is an ISO-standard indexable turning insert designed for efficient external and internal turning operations, especially where cast iron performance and chip control are priorities. CVD-coated carbide for long tool life Universal grade for cast iron machining 55° rhombic shape for versatile applications Double-sided chipbreaker and with hole Consistent performance for cast iron turning The combination of a CVD-coated carbide substrate and a universal grade makes this indexable insert particularly effective for cast iron applications. The coating enhances wear resistance and thermal stability, which translates into longer tool life and fewer insert changes during production runs. For operations requiring predictable tool behaviour and consistent surface finish, the insert’s engineered edge and coating provide a balance between edge stability and abrasion resistance, helping to maintain productivity and reduce unplanned downtime. Clear compatibility and simple mounting Built to ISO dimensions, the insert fits conventional turning holders when the form, relief angle and tolerance class match the toolholder specification. The 55° rhombic geometry and the provision of a central cylindrical hole ensure secure clamping and straightforward indexability. Because the insert is double-sided, two cutting edges are available per index, improving cost-effectiveness per edge and simplifying inventory management. When replacing inserts, checking holder compatibility for form, size and thickness avoids installation errors and keeps changeover times short. Practical advantages for workshop processes The 0° relief angle and defined corner radius support stable cutting conditions on a variety of cast iron grades: the moderate corner radius reduces cutting forces while preserving edge life. The insert’s 6.35 mm thickness contributes to rigidity under cutting loads, reducing vibration and improving surface integrity when facing or profiling. Selecting a matching chipbreaker and cutting parameters adapted to the workpiece material ensures efficient chip evacuation and reduces the risk of built-up edge. For users seeking dependable performance in repetitive turning operations, this geometry and grade combine to offer measurable productivity gains. Suitable applications and handling recommendations Ideal for both external and internal turning, this insert performs well in finishing and semi-finishing passes on cast iron components where repeatable surface quality is required. The rhombic shape enables a wide range of approach angles on lathes and turn-mill centres, while the double-sided design supports economical index changes. For best results, pair the insert with a stable, correctly sized holder and set feeds and speeds according to the material grade and machine rigidity; the insert’s CVD-coated carbide construction tolerates elevated cutting temperatures, allowing higher cutting speeds than uncoated grades in many cast iron applications. Contact Metav Werkzeuge for precise holder matching, application tuning and stock availability of this Tungaloy DNMG150604 T5115 indexable turning insert — expert support and rapid delivery from Metav Werkzeuge. Technical data Article number: 6852975 Manufacturer SKU: TUN6852975 SKU: 6852975-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Insert designation: DNMG150604 Grade: T5115 Corner radius: 0.4 mm Thickness: 6.35 mm Size: 15 mm Angle: 55° Relief angle: 0° Hole: with hole Hole style: cylindrical hole Special features CVD-coated carbide substrate Universal grade for cast iron machining Double-sided chipbreaker Rhombic plate form ISO-standard geometry for holder compatibility FAQ What materials is this insert best suited for? The DNMG150604 T5115 insert is a Tungaloy ISO indexable turning insert optimised for cast iron, combining a CVD coating with a universal grade to deliver wear resistance and edge stability in such applications. How is the insert mounted and secured? Mounting requires an ISO-compatible turning holder with matching form, thickness and tolerance; the DNMG150604 features a cylindrical hole for positive clamping and is double-sided for economical indexing. Can this insert be used for finishing passes? Yes, the insert’s geometry and 0° relief angle make it suitable for finishing and semi-finishing on cast iron when paired with appropriate feeds, speeds and a stable toolholder. How many cutting edges are available per insert? The rhombic, double-sided design of the DNMG150604 T5115 provides multiple indexable edges, improving cost-efficiency per edge and simplifying inventory rotation. Which SKU identifies this item for ordering? Order using SKU 6852975-Tungaloy or Manufacturer SKU TUN6852975 to ensure the correct DNMG150604 T5115 Tungaloy indexable turning insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, precise DNMG 55° geometry and economical double-sided usage for a steady production flow; order directly via Metav Werkzeuge or consult our specialists for integration advice. DNMG 150604 T5115 ISO turning insert for cast-iron turning by Tungaloy The DNMG 150604 T5115 is an ISO-indexable turning insert designed for external and internal turning, offering a balanced combination of wear resistance and edge stability for cast-iron applications. CVD-coated carbide grade T5115 Rhombic DNMG geometry, 55° cutting angle 0° clearance angle for secure positioning Double-sided insert with cylindrical hole Increased productivity through a universal cutting grade The CVD-coated T5115 grade provides a well-balanced mix of wear resistance and edge stability, making it suitable for a wide range of cast-iron operations. The coating reduces abrasive wear on the carbide substrate and extends tool life, which translates into fewer tool changes and longer uninterrupted machining cycles. For production environments where uptime and predictable tool performance matter, this universality supports consistent surface finish and stable cycle times with a limited inventory of insert types. Reliable chip control and secure clamping for fewer interruptions The DNMG rhombic geometry with a 55° cutting angle and a 0.4 mm nose radius is matched to a double-sided chipbreaker design and a cylindrical hole, enabling positive clamping and reproducible orientation in compatible holders. The double-sided format effectively halves tooling costs per cutting edge while the hole style ensures repeatable seating and torque transfer during cutting. These features contribute to improved chip control, reduced downtime for chip clearance and a smoother process for both external and internal turning. ISO compatibility and straightforward integration into existing toolsets As an ISO-standard turning insert, compatibility with a given holder depends on form, clearance angle, tolerance class, fastening method, size and thickness; the plate is 15 mm across with a thickness of 6.35 mm, which suits a broad range of external holders and boring bars. The indexable design simplifies logistics: spare screws, underlays and matching holders form a complete system that supports fast reconfiguration of tooling when workpieces change. The manufacturer SKU and item data support traceability and reorder accuracy for production planning. For technical advice, availability of the Tungaloy DNMG 150604 T5115 insert and assistance with holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations and supply options Technical Data Article number: 6850217 Manufacturer SKU: TUN6850217 Model series: ISO turning inserts Material: carbide Grade/coating: T5115, CVD-coated Facts Plate designation: DNMG150604 Plate size: 15 mm Plate thickness: 6.35 mm Cutting angle: 55° Nose radius: 0.4 mm Clearance angle: 0° Special features Double-sided chipbreaker Cylindrical hole (with hole) Suitable application: turning (external and internal) Universal grade for cast iron ISO-indexable rhombic plate FAQ What materials is this insert suited for? The DNMG 150604 T5115 insert is specified as a universal grade for cast iron, offering a balance of wear resistance and edge stability for typical cast-iron turning tasks. How does the coating affect tool life? The CVD-coated carbide composition of the T5115 grade improves abrasive wear resistance, which extends tool life and ensures more consistent cutting-edge performance throughout production runs. Is the insert compatible with standard ISO holders? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the DNMG150604 format is ISO-standard and fits matching DNMG holders when the holder specifications correspond. Can the insert be indexed for multiple edges? Yes, the insert is double-sided, allowing indexing to a fresh cutting edge and improving cost efficiency per usable edge. What are the mounting features to check before ordering? Check holder compatibility with the cylindrical hole style and ensure the holder accepts a 15 mm, 6.35 mm-thick DNMG plate with a 0° clearance angle. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T5125 Wendeplatten - Tungaloy
Precision, productivity and reliable chip control make this insert a practical choice for demanding turning operations; the CVD-coated carbide T5125 provides robust wear resistance while the ISO geometry ensures straightforward compatibility with standard holders. Order the insert via Metav Werkzeuge or consult our specialists for application-specific guidance. DNMG150604 T5125 Tungaloy turning indexable insert — CVD-coated carbide, rhombic 55° geometry DNMG150604 T5125 Tungaloy-Wendeplatte is an ISO-format turning indexable insert designed for external and internal turning, especially suited to interrupted cuts and less rigid set-ups. CVD-coated carbide grade T5125 For interrupted cuts in cast iron ISO DNMG150604 rhombic insert, 55° edge Double-sided chipbreaker for chip control Cylindrical-holed, 6.35 mm thickness Productivity through material and geometry The combination of a CVD-coated carbide substrate and the T5125 grade results in a wear-resistant cutting edge that is formulated for cast iron machining under interrupted cutting conditions. The rhombic 55° geometry offers a good balance between cutting edge strength and accessibility in shoulder and profile work, while the 0° clearance provides predictable engagement with the workpiece. Together, these factors reduce unplanned downtime and increase process stability, making the insert an efficient choice for production environments where repeatability and tool life are priorities. Predictable chip control and easy integration Equipped with a double-sided chipbreaker and a cylindrical locating hole, the insert promotes controlled chip formation and secure clamping in a compatible holder. The ISO DNMG format simplifies holder selection: compatibility is determined by shape, clearance angle, tolerance class, fixing method, size and thickness, so the insert fits into common external holders and boring bars without special adapters. This predictable behaviour translates into shorter set-up times and fewer interrupted cycles, supporting continuous throughput on the shop floor. Application-focused benefits and handling advice For turning operations on cast components, the tougher grade and chipbreaker combination minimise edge chipping during interrupted cuts and uneven feeds. The insert’s thickness of 6.35 mm and corner radius 0.4 mm provide a stable cutting edge for general finishing and medium-turning tasks; select the chipbreaker and grade to match the workpiece material, clamp rigidity and intended surface finish. Where less rigid fixturing is present, this grade helps maintain consistent performance and surface quality, reducing the need for frequent insert changes. For ordering or detailed application advice on Tungaloy inserts, contact Metav Werkzeuge — technical consultants are available to recommend the optimal grade and holder combination for specific turning jobs. Technical Data Article number: 6850218-Tungaloy Manufacturer SKU: TUN6850218 Manufacturer item no.: 6850218 Model series: ISO-Drehwendeschneidplatten Facts Insert designation: DNMG150604 Grade / coating: T5125, CVD-coated Thickness: 6.35 mm Corner radius: 0.4 mm Cutting angle: 55° Clearance angle: 0° Hole: cylindrical Special features Material: carbide Plate shape: rhombic Chipbreaker: double-sided Use: External and internal turning Application suitability: Cast iron, interrupted cuts System components: ISO insert, suitable holder or boring bar, shim/clamp set, replacement screws FAQ What workpieces is this insert best suited for? This Tungaloy indexable insert is optimised for turning of cast iron, particularly where interrupted cuts occur, thanks to the T5125 CVD-coated carbide grade and robust chip control. Which holders are compatible with the DNMG150604 geometry? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; standard ISO DNMG holders and boring bars designed for 55° rhombic inserts accept this item. How does the chipbreaker improve machining? The double-sided chipbreaker on this insert provides reliable chip formation and evacuation, reducing chip-related interruptions and supporting a steadier cutting process. Can the insert be used for internal boring as well as external turning? Yes, the rhombic DNMG150604 format and the insert’s thickness support both external and internal turning applications when paired with the appropriate boring bar or internal holder. What is the manufacturer SKU for ordering spare inserts? Order using the manufacturer SKU TUN6850218 or the article number 6850218-Tungaloy for precise identification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T6215 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide T6215 grade and a robust 55° rhombic geometry ensures reliable machining of stainless steels under stable to lightly interrupted conditions; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG150604 T6215 indexable insert for turning — Tungaloy DNMG150604 T6215 is a rhombic, double-sided indexable insert designed for general turning, optimised for rostfreier Stahl and similar difficult-to-machine alloys CVD-coated carbide T6215 For stainless steels under stable cuts Rhombic DNMG 55° geometry Double-sided with cylindrical hole High wear resistance for longer tool life The insert features a CVD-coated carbide grade T6215, chosen for wear resistance and consistent edge stability when turning stainless steels under stable or lightly interrupted cutting conditions. The chemical vapour deposition layer provides a hard, thermally stable surface that reduces flank wear and extends life compared with uncoated grades. For production environments this translates into fewer tool changes, more consistent components and a measurable reduction in downtime when the cutting parameters are maintained within recommended ranges. Geometry designed for secure cutting and predictable chips The 55° rhombic DNMG geometry with a 0° relief angle and 0.4 mm corner radius gives a balance between edge strength and dimensional control. The modest corner radius supports improved edge life while maintaining acceptable surface finish on turned parts. The insert is double-sided, effectively doubling usable edges per insert and improving cost-efficiency in batch production. The central cylindrical hole and standard ISO form ensure stable clamping in compatible holders, which aids repeatability and reduces set-up time. ISO standardisation for easy integration into existing tool systems As an ISO-design insert it integrates into common clamping systems; compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. Typical system assembly comprises the indexable insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. This standardisation simplifies procurement and stocking strategies, allowing workshops to consolidate tool families and reduce inventory complexity while maintaining flexibility across turning applications. Practical choice for process-stable turning operations Designed primarily for turning, the plate is well suited to both external and internal operations when paired with an appropriate chipbreaker and the matching grade for the workpiece and process stability. The combination of grade T6215, solid carbide substrate and double-sided design supports productive machining with controlled chip formation and predictable tool wear. For process-focused workshops seeking dependable, repeatable results, this insert offers a pragmatic balance of durability, compatibility and operational economy. Contact Metav Werkzeuge for tailored cutting data or to reserve DNMG150604 T6215 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944719 Manufacturer SKU: TUN6944719 Manufacturer item number: 6944719 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Core data ISO designation: DNMG150604 Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Relief angle: 0° Insert angle: 55° Hole style: cylindrical Special features Material: carbide Coating: CVD (T6215) Double-sided chipbreaker Rhombic plate form With hole for secure clamping Application: turning FAQ Is this insert suitable for stainless steels? The DNMG150604 T6215 insert is formulated for machining stainless steels; the CVD-coated T6215 grade enhances wear resistance and helps control work-hardening during turning. Can the insert be used in interrupted cuts? Yes, the T6215 grade and 0.4 mm corner radius allow stable to lightly interrupted cuts; heavy interruptions require assessment of holder rigidity and cutting parameters. How is the insert mounted in a holder? The insert uses a cylindrical hole and ISO DNMG form for secure clamping; compatibility depends on holder form, relief, tolerance and fastening method. Does the insert have multiple cutting edges? The plate is double-sided, offering multiple usable edges which improves cost-efficiency and reduces tooling change frequency during production. What thickness and size should be considered for tool selection? The insert is 6.35 mm thick and 15 mm in size (DNMG150604); these dimensions must match the chosen ISO-compatible turning holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, precise ISO DNMG150604 geometry, and a double-sided chipbreaker for steady stainless steel turning; the result is predictable tool life and reduced downtime. Order the insert directly via Metav Werkzeuge or consult the technical team for holder compatibility and availability. DNMG150604 T6215 DNMG Turning Insert by Tungaloy — CVD-coated carbide, 55° DNMG150604 T6215 is an ISO DNMG indexable turning insert designed for stable to lightly interrupted turning of stainless steel and similar alloys. CVD-coated carbide for wear resistance Double-sided chipbreaker for controlled chips ISO DNMG form with 55° cutting angle Consistent surface quality through wear-resistant grade The T6215 grade is a CVD-coated carbide formulation optimised for machining stainless steel, providing consistent edge life under stable or lightly interrupted cutting conditions. With a 0.4 mm corner radius, the geometry enhances edge strength and reduces the risk of premature chipping, while the 55° cutting angle moderates cutting forces for improved surface finish. This combination yields reliable cycles between index changes and contributes to predictable process planning, supporting higher machine utilisation and lower per-part tooling costs. Predictable chip control and reduced process interruptions Chip formation is controlled by the double-sided chipbreaker, which ensures repeatable chip geometry across rotations and helps avoid long, tangled swarf in turning operations. The insert’s ISO compatibility and standardised form simplify tool inventory and replacement, while the cylindrical hole and flat rake geometry support stable clamping in compatible holders. These features translate into fewer unscheduled stops, less manual chip clearing, and more consistent cycle times — an economic advantage for batch production and small-lot machining alike. Simple integration into existing turning systems and clear selection guidance The insert fits into a typical system comprising an ISO DNMG indexable insert, a matching external holder or boring bar, a shim or clamp set, and replacement screws. Compatibility is determined by the insert’s form, clearance angle 0°, tolerance class, fastening and thickness (6.35 mm), so matching the insert geometry to the holder is essential for secure seating and repeatable results. For best outcomes, select the chipbreaker and grade according to workpiece stability and desired surface finish. Metav Werkzeuge can advise on the optimal holder and clamping setup for workshop conditions and production goals. For reliable stainless steel turning with the Tungaloy T6215 grade, request technical advice and availability from Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6950971 Manufacturer: Tungaloy Manufacturer SKU: TUN6950971 Model series: ISO indexable turning inserts Facts Corner radius: 0.4 mm Plate size: 15 mm Plate thickness: 6.35 mm Cutting angle: 55° Clearance angle: 0° Hole: cylindrical (with hole) Special features Grade: T6215 (CVD-coated carbide) Double-sided chipbreaker ISO DNMG150604 geometry (rhombic) For turning — external and internal Compatibility requires matching form, tolerance class and thickness FAQ Which materials is this insert intended for? The DNMG150604 T6215 insert by Tungaloy is intended primarily for stainless steel machining under stable to lightly interrupted conditions; its CVD-coated carbide construction provides wear resistance suited to such alloys. How does holder compatibility work for this geometry? Compatibility depends on the DNMG form, clearance angle, tolerance class, fastening, size and thickness; ensure the external holder or boring bar accepts DNMG150604 geometry and secures the insert with the correct shim or clamp set. What benefits does the T6215 grade deliver in practice? T6215 delivers improved wear resistance and process stability on demanding stainless steel tasks, extending edge life and supporting consistent surface quality between index rotations. How does the chipbreaker affect machining? The double-sided chipbreaker provides repeatable chip shapes on both sides of the insert, improving chip evacuation and reducing the chance of swarf-related interruptions during turning. What are the article number and SKU for ordering? Article number 6950971, Manufacturer SKU TUN6950971 for the DNMG150604 T6215 Tungaloy insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T6215 and a stable 55° rhombic geometry for consistent stainless steel machining; this ensures reliable chip control and extended tool life. Order the DNMG150604 T6215 Tungaloy indexable insert directly via Metav Werkzeuge or consult our advisors for compatibility and application guidance. DNMG 150604 T6215 indexable turning insert for Turning — Tungaloy, 55° CVD-coated carbide The DNMG150604 T6215 indexable turning insert is engineered for external and internal turning operations, offering a robust solution for stainless steels under stable to slightly interrupted cutting conditions. ISO DNMG150604 geometry, 55° rhombic insert CVD-coated carbide grade T6215 for stainless steels Double-sided chipbreaker for stable cutting Cylindrical hole, compatible with standard holders Consistent performance for stainless steel turning The combination of a CVD-coated surface and the T6215 grade provides high wear resistance and improved chip control when machining austenitic and other stainless steels. The CVD-coated carbide layer reduces flank wear and supports longer tool life under continuous and lightly interrupted cuts, resulting in fewer index changes and more predictable production cycles. This technical reliability translates directly into smoother process flows and reduced downtime. Geometry optimised for repeatable accuracy The 55° rhombic configuration with a corner radius 0.4 mm and 0° clearance is designed to balance strength and versatility for both facing and profiling tasks. The DNMG150604 format conforms to ISO dimensions, simplifying holder selection and replacement. A cylindrical hole and standard fixation ensure secure mounting in compatible holders, while the double-sided nature of the insert allows effective indexing to restore cutting performance without component replacement. Operational benefits and system approach As part of an ISO-compliant turning system, the insert works together with a suitable external holder, clamp set and fixing screws to deliver repeatable results. The indexable design and double-sided chipbreaker reduce tooling costs per cutting edge by enabling multiple indexing steps. This configuration supports higher productivity and process stability in series production, especially where consistent surface finish and dimensional accuracy are required. Practical selection and application guidance Select the chipbreaker and grade according to workpiece material, stability of the setup and the intended cutting action; this maximises tool life and surface quality. For stainless steels, the T6215 grade is recommended for stable to slightly interrupted conditions due to its balanced toughness and wear resistance. When in doubt about holder compatibility or optimal cutting parameters, further technical data such as holder form, rake, and tolerance class should be checked to ensure correct integration within the machining system. Contact Metav Werkzeuge for ordering or technical advice on the Tungaloy DNMG150604 T6215 insert — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6944599 SKU: 6944599-Tungaloy Manufacturer article number: 6944599 Manufacturer SKU: TUN6944599 Brand: Tungaloy Facts Insert size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Insert angle: 55° Clearance angle: 0° Hole: with cylindrical hole Materials and features Material: carbide Grade/coating: T6215 (CVD-coated carbide) Insert shape: rhombic Chipbreaker: double-sided Mounting: ISO-compatible turning insert system Application: turning (external and internal) Suitable for: stainless steels FAQ What materials is this insert suited for? The DNMG150604 T6215 insert is intended primarily for machining stainless steels; the T6215 grade and CVD coating provide wear resistance suited to those materials. Is the insert compatible with standard ISO holders? Yes, the format conforms to ISO DNMG dimensions and the cylindrical hole and rhombic shape allow compatibility with common external holders and clamping systems. How does the double-sided chipbreaker affect performance? A double-sided chipbreaker permits multiple indexing options and supports improved chip control, helping to maintain cutting stability and extend usable tool life. What does the 55° geometry mean for machining? The 55° rhombic angle provides a balance between cutting edge strength and access for facing and profiling, making it versatile for various turning operations. Can this insert be used for interrupted cuts? The T6215 grade is designed for stable to slightly interrupted conditions; for heavily interrupted cuts, a different grade or a more robust geometry may be recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, CVD-coated carbide and a 55° rhombic geometry to achieve stable, repeatable turning in stainless steels; order the insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150604 T6215 DNMG150604 T6215 Tungaloy turning insert — rhombic 55° ISO turning insert for stable cuts DNMG150604 T6215 is an ISO-standard rhombic turning insert designed for turning applications where consistent chip control and long tool life are required. CVD-coated carbide grade T6215 Rhombic geometry with 55° angle 0.4 mm corner radius Double-sided chipbreaker, cylindrical hole Maximised productivity for stainless-steel turning The DNMG150604 T6215 delivers a clear production advantage in applications involving stainless steels thanks to its CVD-coated carbide matrix. The coating increases wear resistance and reduces built-up edge formation during continuous and lightly interrupted turning, which translates into longer tool life and fewer tool changes. In practical terms, this means more uptime on the lathe and a more predictable machining window when machining difficult-to-cut alloys. The double-sided nature of the insert also ensures economical indexation, while the cylindrical hole supports robust clamping in a wide range of ISO-compatible toolholders. Consistent geometry for secure clamping and simple tool selection The rhombic 55° shape and the specified dimensions—15 mm size with a plate thickness of 6.35 mm—provide a balance between accessible cutting-edge reach and mechanical stability. The 0.4 mm corner radius offers a compromise between edge strength and surface finish, suitable for many finishing and light-roughing tasks. Compatibility with a holder depends on form, relief angle, tolerance class, mounting method, size and thickness; this ISO-normalised approach simplifies selection across different holder families and reduces the risk of incorrect mounting in production environments. Clear geometric data supports quick verification and minimises setup time. Durable grade and reliable chip control for repeatable quality The T6215 grade is a CVD-coated carbide developed for wear resistance under stable to slightly interrupted cutting conditions, offering stable chip formation and consistent surface quality. The integrated double-sided chipbreaker aids in producing short, controllable chips across a range of cutting parameters, reducing the likelihood of chip entanglement and protecting the workpiece surface. For workshops aiming to standardise tool performance, this insert supports reproducible results and contributes to process stability, especially where batch-to-batch consistency is essential. For reliable machining with Tungaloy expertise, contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944663 Manufacturer SKU: TUN6944663 SKU: 6944663-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150604 Material: carbide Coating / Grade: T6215 (CVD-coated) Application: turning Facts Cutting-edge angle: 55° Plate size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Relief angle: 0° ISO plate code: 150604 Special features Rhombic plate shape with cylindrical hole Double-sided chipbreaker ISO-standard turning insert Compatibility dependent on form, relief angle, tolerance class, mounting, size and thickness Suited for stable to lightly interrupted turning of stainless steels FAQ What materials is this insert suitable for? The DNMG150604 T6215 insert is specified for machining stainless steels under stable to slightly interrupted cutting conditions, using its CVD-coated carbide composition for improved wear resistance. How does the chipbreaker affect performance? The double-sided chipbreaker on the turning insert promotes short, consistent chips and helps protect the workpiece surface, enabling predictable machining results with fewer interruptions. Can this insert be used in any ISO holder? The insert conforms to ISO dimensions, but compatibility depends on holder form, relief angle, tolerance class, mounting and thickness; verify holder specifications against the DNMG150604 dimensions before use. How many cutting edges are available per insert? The rhombic, double-sided design provides multiple indexable cutting edges, improving tool economy by allowing several repositions before replacement. What is the benefit of the T6215 grade? The T6215 grade is a CVD-coated carbide designed for wear resistance and stable edge performance during turning of stainless steels, contributing to longer tool life and consistent surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T6215 Wendeplatten - Tungaloy
The combination of a CVD‑coated cemented carbide grade T6215, a 0.4 mm corner radius and a 55° rhombic geometry ensures durable cutting performance and consistent surface finish when turning stainless steels; ISO conformity simplifies toolholder selection and minimises downtime. Order the DNMG150604 T6215 insert directly via Metav Werkzeuge or ask the consultants for application advice. DNMG 150604 T6215 — DNMG150604 T6215 Tungaloy indexable turning insert for Turning DNMG150604 T6215 is a rhombic ISO indexable insert designed for external and internal turning, optimised for stainless steels under stable to mildly interrupted cutting conditions CVD-coated carbide grade T6215 for stainless steel Rhombic 55° insert, 15 mm inscribed circle Double-sided chipbreaker, long tool life Cylindrical hole — secure clamping, ISO‑compliant Reliable machining for stainless-steel turning The CVD‑coated cemented carbide grade T6215 delivers a balance of wear resistance and toughness tailored to machining stainless steels. This coating technology reduces flank wear and increases edge stability, which translates into longer intervals between indexings and fewer tool changes. The rhombic geometry with a 55° included angle and a 0.4 mm corner radius provides a compromise between strength and precision: small radii help achieve fine contours and acceptable surface quality, while the insert form supports stable cutting under moderate interruptions. Operators benefit from repeatable results and predictable tool life when the correct chipbreaker and grade are selected. Secure clamping and ISO compatibility for efficient shop workflows Compliance with ISO dimensions means the insert mates straightforwardly with compatible holders; form, free angle, tolerance class, fixation and thickness determine compatibility. The DNMG150604 features a cylindrical hole for stable engagement and a plate thickness of 6.35 mm that contributes to rigidity at the cutting zone. The double‑sided design provides two usable edges per index, halving the replacement frequency compared with single‑edged solutions. As a result, set‑up times are reduced and process reliability is improved, particularly in production environments where consistent clamping and quick index changes matter. Improved chip control and surface quality with the integrated chipbreaker The insert’s double‑sided chipbreaker is optimised for turning operations on tougher alloys such as stainless steels, helping to control chip form and evacuation. Controlled chip formation reduces the risk of edge rubbing and thermal accumulation at the cutting edge, which supports better surface finish and dimensional consistency. The technical choice of a 0° clearance geometry offers a neutral cutting stance that can be advantageous when avoiding burr formation; combined with the T6215 grade, this geometry is suited to stable cutting regimes where adhesion and built‑up edge are common concerns. For shops seeking a reliable general‑purpose turning solution for rostfreier Stahl, this insert provides a practical mix of economy and performance. For precision stainless‑steel turning with proven durability, choose the Tungaloy DNMG150604 T6215 insert — contact Metav Werkzeuge for application guidance, availability checks or to discuss the optimal chipbreaker and holder combination for specific turning tasks. Technical Data Article number: 6944652 Manufacturer SKU: TUN6944652 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: DNMG150604 T6215 Tungaloy‑Wendeplatte Facts Inscribed circle: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Included angle: 55° Relief/clearance angle: 0° Manufacturer article number: 6944652 SKU: 6944652-Tungaloy Special features CVD‑coated cemented carbide (T6215) Double‑sided chipbreaker Rhombic insert form (DNMG) Cylindrical hole for fixation ISO‑standard indexable turning insert Application: Turning — external and internal Suitable for stainless steels FAQ What materials is this insert suited for? The DNMG150604 T6215 insert is formulated for machining stainless steels; the CVD‑coated cemented carbide grade T6215 supports wear resistance in such applications. How does the insert fix in the holder? The insert is supplied with a cylindrical hole for positive clamping; its ISO dimensions (DNMG150604) ensure compatibility with standard DNMG‑type holders when form, tolerance and fastening match. How many cutting edges are available per insert? This version is double‑sided, providing two usable cutting edges per index and allowing for a quick flip to restore a fresh edge. What benefits does the T6215 grade provide? T6215’s CVD coating increases edge life and thermal resistance during stainless‑steel turning, offering a balance of wear protection and cutting stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that delivers wear-resistant performance for stainless-steel turning, combined with a compact rhombic DNMG 15×6.35 mm geometry for stable chip control. Order the insert directly via Metav Werkzeuge or ask the consultants for application support to ensure immediate process compatibility. DNMG150604 T6215 DNMG turning insert — CVD-coated carbide for stainless-steel turning (Tungaloy) DNMG150604 T6215 is an ISO-format turning indexable insert designed for general external and internal turning where consistent edge life and chip control are required CVD-coated carbide grade T6215 Optimised for rostfreier Stahl turning Rhombic DNMG 15 × 6.35 mm format Double-sided chipbreaker with cylindrical hole Higher output from a wear-resistant cutting edge The combination of a CVD-coated surface with a robust carbide substrate yields a cutting edge engineered for extended life under stable to mildly interrupted cuts. As an ISO-format indexable insert, the DNMG geometry provides a balanced cutting-face angle that reduces the risk of edge chipping and supports predictable tool-changing intervals. This results in measurable gains in machine uptime and fewer unscheduled interventions, improving throughput in serial production and small-batch machining alike. Confidence in clamping compatibility and process stability The rhombic insert format and standard ISO designation simplify selection of a matching holder: compatibility depends on form, relief angle, tolerance class, attachment style, size and thickness. The insert features a 0° relief angle, a 0.4 mm nose radius and a 6.35 mm plate thickness, ensuring secure seating and repeatable geometry during tool changes. Clear dimensional standards mean less setup time and consistent part finish, which supports higher first-pass yield and reduced rework costs. Optimised chip control and material scope for machining rostfreier Stahl A double-sided chipbreaker combined with the T6215 grade achieves stable chip formation when turning rostfreier Stahl, delivering improved surface quality and easier chip evacuation. The central cylindrical hole supports reliable clamping and balanced insert indexing. Specified for turning duties, this grade is particularly suited to applications where a compromise between wear resistance and toughness is required, offering predictable tool life and consistent results across mixed-shift operations. Contact Metav Werkzeuge for tailored advice on clamping options and to order the Tungaloy DNMG150604 T6215 insert — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for rapid guidance and availability Technical Data Article number: 6944584 Manufacturer SKU: TUN6944584 SKU: 6944584-Tungaloy Manufacturer article number: 6944584 Core figures Nose radius: 0.4 mm Plate thickness: 6.35 mm Inscribed circle / size: 15 mm Relief angle: 0° Included angle: 55° Design & special features ISO turning indexable insert CVD-coated carbide, grade T6215 Rhombic plate form (DNMG) Double-sided chipbreaker With cylindrical hole for clamping Suitable for turning rostfreier Stahl Compatible with standard DNMG holders and clamping sets FAQ What machining tasks is this insert intended for? The DNMG150604 T6215 insert is intended for external and internal turning tasks, offering a balanced solution for general turning where rostfreier Stahl is machined under stable to slightly interrupted conditions. How does the coating improve performance? The CVD-coated surface on the T6215 grade enhances wear resistance and edge stability, which improves tool life and maintains consistent surface finish when machining stainless steels with the DNMG geometry. Is the insert compatible with standard DNMG holders? Yes, the insert follows ISO DNMG dimensions; compatibility with a holder is determined by form, relief angle, tolerance class, attachment, size and thickness, matching the usual DNMG clamping systems. What are the key dimensional specifications to check before ordering? Key checks include the 15 mm inscribed circle, 6.35 mm plate thickness, 0.4 mm nose radius and 0° relief angle to ensure the insert fits the intended DNMG holder and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T6215 Wendeplatten - Tungaloy
Take advantage of high wear resistance, stable chip control and ISO compatibility for consistent turning performance; the combination of a CVD-coated carbide grade and a robust 55° rhombic geometry improves tool life and surface finish. Order the DNMG150604 T6215 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150604 T6215 DNMG turning insert – CVD-coated carbide for stainless steel (Tungaloy) DNMG150604 T6215 is an ISO rhombic turning insert engineered for reliable performance in stable to slightly interrupted stainless steel turning applications CVD-coated carbide grade T6215 Optimised for stainless steel machining Double-sided chipbreaker for stable cutting ISO rhombic form, 55° included angle High wear resistance for consistent stainless steel turning The CVD-coated T6215 grade provides elevated wear resistance and reliable edge stability when machining stainless steel under stable to slightly interrupted conditions. This coating technology increases thermal and adhesive wear resistance compared with uncoated grades, which reduces edge breakdown and extends cutting edge life. The combination of the coating and a hard carbide substrate makes the component suitable for sustained production cycles where repeatable results and fewer tool changes are priorities. Secure clamping and proven ISO compatibility for easy integration Designed as an ISO-standard rhombic insert with a 55° included angle and a 0° relief, the geometry matches common external holders and boring bars. The cylindrical hole ensures positive, repeatable clamping in holders that accept ISO rhombic plates, while a 6.35 mm thickness contributes to rigidity and vibration damping. A 0.4 mm corner radius balances strength and surface finish, offering predictable engagement with the workpiece. These standardized dimensions simplify tool selection and minimise setup variability on the shop floor. Productivity gains through chip control and indexable design The double-sided chipbreaker provides two usable cutting edges per index, enabling economical use of the insert in batch and serial production. The indexable design reduces downtime for regrinding or replacement and supports consistent chip formation when matched with the appropriate holder and machining parameters. Careful selection of chipbreaker, grade and cutting data yields lower cycle times and improved surface integrity, delivering measurable efficiency gains in turning operations. For process advice on applying the Tungaloy T6215 grade or to order the DNMG150604 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and immediate availability Technical Data Article number: 6875575 Manufacturer SKU: TUN6875575 SKU: 6875575-Tungaloy Designation: DNMG150604 Facts Included angle: 55° Corner radius: 0.4 mm Thickness: 6.35 mm Inscribed circle/size: 15 mm Relief angle: 0° Special features CVD-coated carbide, grade T6215 Double-sided chipbreaker Rhombic plate form (DNMG) Cylindrical hole for secure clamping ISO turning insert family Application: turning (Drehen) Material: carbide (Hartmetall) FAQ Is this insert suitable for machining stainless steel? Yes. The DNMG150604 T6215 insert from Tungaloy is formulated for stainless steel turning and offers enhanced wear resistance for stable to slightly interrupted cuts. What holder compatibility is required for this insert? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening and thickness; the DNMG150604 fits ISO rhombic holders designed for 55° inserts and a 6.35 mm plate thickness. How many times can the insert be indexed? The DNMG150604 is double-sided, providing two usable cutting edges per index; the total number of indexes equals the number of faces on the insert before disposal. What does the T6215 grade signify for performance? T6215 is a CVD-coated carbide grade optimised for wear resistance and stable chip control when turning stainless steels, providing longer edge life in production environments. Are there recommended applications or limits for interrupted cuts? The insert is intended for stable to slightly interrupted turning; for heavy interruptions or extreme shock loads, a geometry with a larger nose radius or specific holder support is advisable for improved security. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of wear‑resistant CVD coating (T6215) and the DNMG150604 ISO format for consistent, high‑productivity turning of stainless steels; order the original Tungaloy insert directly via Metav Werkzeuge or consult our specialists for suitability and inventory. DNMG150604 T6215 Tungaloy turning insert — ISO indexable insert for turning (Drehen) The DNMG150604 T6215 Tungaloy insert is an ISO‑format indexable turning insert engineered for external and internal turning of stainless steels under stable to lightly interrupted cutting conditions. DNMG150604 format, ISO interchangeability CVD‑coated carbide T6215 for stainless steels Double‑sided chipbreaker, stable cutting 0.4 mm corner radius, cylindrical hole Higher productivity through CVD coating and material choice The use of a CVD coating on a robust carbide substrate in grade T6215 provides superior wear resistance and predictable flank performance when machining stainless steels. The coating reduces adhesive wear and improves heat resistance during continuous cuts, which helps to extend tool life and maintain dimensional accuracy. For operations where cutting stability is consistent or only mildly interrupted, this combination delivers a measurable reduction in tooling costs and fewer unscheduled tool changes. Secure seating and ISO compatibility for reliable clamping Designed in the ISO‑standard DNMG150604 format, the insert ensures straightforward interchangeability across compatible tooling systems. The 0° clearance geometry combined with the rhombic plate form and cylindrical hole enables positive locating and repeatable clamping in appropriately matched holders. The 55° lead angle and a plate thickness of 6.35 mm contribute to rigidity in the tool system, improving surface finish and reducing chatter when the insert is used with a correctly specified indexable holder. Consistent chip control and component quality The double‑sided chipbreaker geometry is tuned to produce controlled chip forms during turning, helping to avoid built‑up edge and to simplify chip evacuation. The 0.4 mm corner radius balances edge strength and surface integrity, providing a compromise between cutting robustness and fine finish. Where a smoother finish is required, the same geometry supports reduced depth‑of‑cut strategies with reliable chip breakage, lowering rework rates and enhancing throughput. System integration and recommended applications As part of an ISO insert system, effective use of this grade requires selection of a matching holder, pad or clamping kit, and the correct fastening screw. The insert is particularly suitable for conventional turning tasks on stainless steels, both external and internal, where stable cutting conditions exist. Selecting an alternative chipbreaker or adapting cutting parameters can broaden applicability; the grade is optimised for productive, repeatable metal removal rather than highly interrupted, impact‑heavy operations. For technical advice on integrating the Tungaloy T6215 grade into production or to arrange supply through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss availability and recommended holders. Technical data Manufacturer article number: 6877360 SKU: 6877360-Tungaloy Manufacturer SKU: TUN6877360 Model series: ISO‑Drehwendeschneidplatten Format: DNMG150604 Core data Plate size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.4 mm Lead angle: 55° Clearance angle: 0° Special features Material: carbide Grade: T6215 (CVD‑coated) Hole: with cylindrical hole Chipbreaker: double‑sided Plate form: rhombic Application: turning FAQ What materials is this insert suitable for? The DNMG150604 T6215 Tungaloy insert is designed primarily for machining stainless steels; the CVD‑coated carbide composition improves wear resistance and thermal stability when turning such alloys. Is the insert compatible with standard DNMG holders? Yes. The DNMG150604 format follows ISO dimensions; compatibility depends on holder form, clearance, tolerance class, clamping method, size and thickness — matching these parameters ensures secure seating. How does the chipbreaker affect performance? The double‑sided chipbreaker on this insert promotes controlled chip formation and evacuation, which supports stable cutting and reduces the risk of built‑up edge during continuous turning operations. Can the insert be used for internal and external turning? The insert is suitable for both external and internal turning when installed in an appropriate holder; system rigidity and correct parameter selection are essential for best results with the DNMG150604 geometry. What is the recommended corner radius for finishing operations? The standard 0.4 mm corner radius offers a balance between edge strength and surface finish; for finer finishes, consider adjusting feeds or selecting a smaller radius within the applicable product range Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 T6215 Wendeplatten - Tungaloy
Combining CVD-coated carbide in grade T6215 with a 0.4 mm corner radius and ISO conformity, this insert delivers dependable performance for turning of stainless steel under stable to lightly interrupted cutting conditions. Order the insert via Metav Werkzeuge or consult their team for application-specific recommendations. DNMG150604 T6215 – Turning insert DNMG 150604 T6215 for turning by Tungaloy, CVD-coated carbide, 0.4 mm radius A DNMG150604 T6215 ISO turning insert engineered for reliable stainless steel machining in stable to lightly interrupted turning operations. CVD-coated carbide grade T6215 Optimised for stainless steel turning Double-sided chipbreaker for consistent cuts 0.4 mm corner radius for fine profile control Longer productive tool life through optimised grade and coating The combination of a CVD-coated carbide substrate and the T6215 grade reduces flank wear and maintains cutting-edge integrity, resulting in longer tool life and more consistent cycle times. For production environments where repeatability matters, the wear resistance of the coating helps to avoid frequent index changes and keeps set-up intervals predictable. This reliability supports steady throughput and lower overall tooling consumption without sacrificing surface quality. Geometry and clamping for accurate profiles and stability The rhombic insert form with a 55° approach geometry and a 0.4 mm corner radius provides controlled cutting engagement and fine profile definition. The double-sided chipbreaker delivers two usable cutting edges per index, while the cylindrical hole ensures secure, repeatable clamping in ISO-compatible holders. These features together reduce vibration and support dimensional accuracy on both external and internal turning operations. Designed for the challenges of stainless steel machining Stainless steels tend to work-harden and promote built-up edge formation; the CVD-coated surface of this insert minimises adhesive wear and improves chip evacuation, which in turn enhances surface finish and reduces rework. The grade is tuned for the thermal and mechanical demands of rostfreier Stahl machining under stable to lightly interrupted conditions, offering better process stability than uncoated grades in similar applications. ISO conformity and simple tool planning for production shops As an ISO turning insert with a thickness of 6.35 mm and standard sizing, this component integrates with common ISO holders and tool systems, simplifying inventory and tool management. The insert’s specifications — size 15, 0° relief angle and a clearly defined ISO designation — make tool selection and NC programme validation more straightforward, while enabling shops to match chipbreaker and grade to specific workpiece materials and stability conditions. For application-specific cutting data, compatibility checks or procurement of Tungaloy CVD-coated inserts, contact Metav Werkzeuge for tailored advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6875529 Manufacturer SKU: TUN6875529 Metav SKU / UID: 6875529-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Numbers / Core technical data Approach angle: 55° Corner radius: 0.4 mm Plate thickness: 6.35 mm Plate size: 15 Relief angle: 0° Designs / Special features Grade: T6215 Coating: CVD-coated Shape: rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Application: turning, optimised for stainless steel FAQ Which materials is this insert best suited for? This DNMG150604 T6215 insert is optimised for machining stainless steel; the Tungaloy T6215 grade and CVD-coated surface suit stable to lightly interrupted turning of rostfreier Stahl. How does the chipbreaker affect performance? The double-sided chipbreaker on the insert improves chip control and promotes consistent cutting forces, helping to maintain surface finish and tool life during repetitive turning. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO plate dimensions and fits common ISO-compatible turning holders that accept DNMG-type plates with a cylindrical locating hole. How many cutting edges are available per insert? The rhombic DNMG form with a double-sided chipbreaker provides two indexed edges per side, allowing multiple reindexes before replacement. What does the 0° relief angle mean for machining? A 0° relief angle provides a neutral clearance geometry that is commonly used in ISO turning plates to balance edge strength and versatility across external and internal turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide durability and ISO‑standard form for dependable stainless steel turning; the rhombic geometry and 0° clearance deliver predictable chip control and extended tool life. Order original Tungaloy inserts or consult Metav Werkzeuge for application advice. DNMG 150604 T6215 — Turning insert DNMG (ISO 150604), CVD‑coated carbide by Tungaloy The DNMG150604 T6215 is an ISO rhombic turning insert optimised for machining stainless steels under stable to slightly interrupted cutting conditions and designed for use in compatible ISO turning holders. CVD‑coated carbide for wear resistance Suitable for stainless steel turning Rhombic 55° geometry, 0° clearance Double‑sided insert with cylindrical hole Reliable performance for production turning The CVD‑coated carbide grade T6215 is formulated for wear resistance during extended runs on stainless steels. Its chemical vapour deposition layer provides a hard, uniform coating that slows flank and crater wear, leading to longer edge life. For process planners, this translates into fewer indexings and less tool handling, which improves uptime and reduces per‑part tooling cost without sacrificing component quality. Design features that aid chip control and stability A rhombic insert with a nominal 55° approach angle combines good strength with accessible cutting geometry for external and internal turning. The double‑sided design increases the number of usable cutting edges per plate, while the cylindrical hole and standard clamping dimensions ensure secure fastening in ISO holders. Explained simply: the geometry helps to direct chips away from the cutting zone and the secure clamping reduces vibration, so productivity and surface finish are both improved. Practical compatibility and system considerations This grade is part of the ISO turning insert family and is compatible with holders that match form, clearance angle, tolerance class, fixation, size and thickness. Typical system components include a matching external holder or boring bar, shim/underplate and clamping set with replacement screws. Selecting a holder with the correct seat and clamp ensures repeatable seating, which is crucial for maintaining tolerance and repeatability in batch production. Application advice and machining benefits When set up for stable turning of stainless steels, the combination of 0° clearance and the 0.4 mm corner radius delivers a balance between edge strength and cutting action, reducing edge chipping on interrupted cuts. For machinists seeking consistent surface finish, this insert provides predictability in cutting forces and wears in a controlled manner, which helps when process windows are tight. For beginners: the indexable insert format means only the plate is replaced or indexed — not the whole tool — offering economical maintenance. For production‑critical turning operations, request application support from Metav Werkzeuge or secure original Tungaloy inserts via Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6944630-Tungaloy Manufacturer article number: 6944630 SKU (manufacturer): TUN6944630 Series: ISO‑Drehwendeschneidplatten Material: carbide Facts Plate size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.4 mm Approach angle: 55° Clearance angle: 0° Special features Grade: T6215 Coating: CVD‑coated carbide Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning (external and internal) Suitable for: stainless steels FAQ What materials is this insert suitable for? The DNMG150604 T6215 insert is intended primarily for machining stainless steels; the CVD‑coated carbide composition supports wear resistance in that material class. How many cutting edges are available per insert? As a double‑sided indexable insert, the Tungaloy DNMG150604 provides multiple usable edges — each side can be indexed to expose a fresh cutting edge. Which holders are compatible with this ISO insert? Compatibility is determined by form, clearance angle, tolerance class, fixation, size and thickness; the DNMG150604 fits standard ISO DNMG holders designed for 15 mm rhombic plates. What are the key setup parameters to consider? Focus on secure clamping with the correct shim/underplate, appropriate cutting speed for stainless steel, and stable feed to exploit the T6215 grade’s wear characteristics. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T6215 and a double-sided chipbreaker for reliable turning of stainless steels; the rhombic ISO geometry ensures predictable seating in standard holders. Order the DNMG 150604 T6215 turning insert directly via Metav Werkzeuge or ask our consultants for application advice. DNMG150604 T6215 Turning Insert — CVD-coated carbide, 55° (Tungaloy) DNMG150604 T6215 is a rhombic ISO turning insert designed for stable external and internal turning of stainless steels, suitable for stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 Double-sided chipbreaker for stability Rhombic form with 55° cutting angle Cylindrical hole for secure clamping Enhanced wear resistance for stainless-steel applications The CVD-coated carbide in grade T6215 provides high abrasion resistance and thermal stability specifically for machining stainless steels. The coating reduces flank wear and helps maintain a consistent cutting edge under continuous load, which translates into longer tool life and fewer unexpected tool changes. For operations where predictable life and reproducible results are required, this insert delivers stable performance even when the cut is slightly interrupted, making it a sound choice for serial turning. Reliable fit and repeatable accuracy in ISO systems Designed to the ISO DNMG150604 specification, the rhombic geometry and cylindrical hole ensure dependable seating and clamping in compatible external holders or boring bars. The 55° cutting angle offers a balance between cutting strength and chip formation control, while the specified relief angle supports consistent contact conditions at the tool–workpiece interface. Clear tolerance matching of form, thickness and size reduces setup time and helps maintain repeatable part quality across tool changes. Controlled chip formation and process productivity The double-sided chipbreaker promotes regular chip segmentation and evacuation, which reduces heat concentration at the cutting edge and improves surface condition. Stable chip control lowers the risk of re-cutting and machine interruption, contributing to higher productivity and less spindle downtime. By combining robust material properties with engineered chip geometry, the insert supports efficient turning cycles and consistent dimensional results, enhancing overall process reliability on the shop floor. For reliable, application-focused turning with Tungaloy’s T6215 grade, contact Metav Werkzeuge to confirm holder compatibility and availability — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 6875517 Manufacturer SKU: TUN6875517 Manufacturer article number: 6875517 SKU: 6875517-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Dimensions & angles Cutting angle: 55° Thickness: 6.35 mm Inscribed circle (size): 15 mm Nose radius: 0.4 mm Relief angle: 0° Materials & features Material: carbide Coating: CVD-coated Shape: rhombic Hole: cylindrical hole (with hole) Chipbreaker: double-sided ISO designation: DNMG150604 Application: external and internal turning; stainless steels FAQ What materials is the DNMG150604 T6215 best suited for? The DNMG150604 T6215 insert is optimised for stainless steels; the CVD-coated carbide and chipbreaker combination provides wear resistance and chip control for stable to lightly interrupted turning. How is the insert fixed in the holder? This rhombic insert features a cylindrical hole for secure clamping in compatible ISO holders and boring bars; correct seating depends on form, thickness and tolerance class. Which cutting angle does the insert provide and what does it mean in practice? The insert has a 55° cutting angle, offering a compromise between edge strength and chip flow that is well suited to general-purpose external and internal turning. Is the coating suitable for high-temperature cutting? The CVD coating on the T6215 grade increases thermal stability and abrasion resistance, supporting sustained cutting performance in stainless-steel turning. What are the key identifiers for ordering the correct item? Order using the designation DNMG150604 T6215 Tungaloy or the SKU 6875517-Tungaloy to ensure the correct ISO insert, grade and manufacturer are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T6215 Wendeplatten - Tungaloy
Combining a CVD-coated carbide T6215 grade with a 55° rhombic geometry and a 0.4 mm corner radius delivers stable, wear-resistant performance for turning stainless steels under stable to slightly interrupted conditions. Order the DNMG150604 insert directly via Metav Werkzeuge or consult our specialists for application-specific selection. DNMG150604 T6215 DNMG turning insert for turning, CVD-coated carbide (Tungaloy) DNMG150604 T6215 is an ISO rhombic indexable insert engineered for external and internal turning of stainless steels, offering a wear-resistant CVD coating and a double-sided chipbreaker for economical use. CVD-coated carbide for wear resistance Optimised for stainless steel turning Rhombic 55° geometry for versatile turning Double-sided chipbreaker for economical use Consistent performance on stainless steel The combination of a CVD-coated surface and a robust carbide substrate gives prolonged edge life when machining stainless steel in stable or lightly interrupted operations. The coating reduces flank and crater wear, which in turn stabilises process parameters and minimises unscheduled tool changes. This grade is designed to maintain cutting-edge integrity across longer production runs, supporting predictable cycle times and repeatable part quality. The result is fewer tool interventions and a more consistent surface finish on turned components. Geometry and cutting-edge protection for reliable results A 55° geometry (rhombic form) with a 0° rake angle balances strength and versatility, allowing comfortable interchangeability with ISO-standard toolholders while resisting chipping on interrupted cuts. The 0.4 mm corner radius contributes to edge robustness and improves life in shoulder and profile turning. The insert’s double-sided chipbreaker offers two usable edges per face, enhancing economy and reducing tool inventory. Together, these features support stable chip control and a secure clamping interface, which is crucial for repeatable dimensional accuracy in batch production. Toolholder compatibility and mounting considerations This ISO-format insert is compatible where form, clearance angle, tolerance class, attachment and thickness match the holder. The plate thickness of 6.35 mm and the inscribed size of 15 mm must be matched to a suitable external holder or boring bar; the insert’s cylindrical hole facilitates reliable fastening and orientation in standard clamping systems. For replacements or retrofits, confirm holder specification (size, clamp style and tolerance) to ensure full contact and correct seating. Proper pairing reduces vibration and extends both insert and toolholder life. Economic and process advantages in production Using a grade optimised for rostfreier Stahl with a balanced chipbreaker and double-sided indexing reduces cost per edge and supports higher up-times. The indexable design allows quick edge changes, lowering setup time and keeping machines productive. Selecting a wear-resistant coated carbide like T6215 helps maintain dimensional stability over long runs and reduces scrap rates. For workshops aiming to combine productivity with process security, this insert supports reproducible results and efficient use of tool stocks. For reliable stainless steel turning performance select the Tungaloy T6215 grade and contact Metav Werkzeuge for tailored advice or order arrangements via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6944699 Manufacturer SKU: TUN6944699 SKU: 6944699-Tungaloy Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Inscribed size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.4 mm Geometry angle: 55° Rake angle: 0° Designs / Special features Material: carbide Coating/grade: CVD-coated, T6215 Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) ISO designation: DNMG150604 FAQ What materials is this insert suitable for? The DNMG150604 T6215 insert is designed primarily for machining stainless steels and performs well under stable to slightly interrupted cutting conditions. What does the T6215 grade mean for tool life? Tungaloy’s T6215 is a CVD-coated carbide grade formulated to resist abrasive wear and maintain edge integrity, improving tool life during extended turning operations on stainless steels. Which toolholders fit this insert? Compatibility depends on matching the ISO form, clearance angle, tolerance class, fastening method, size (15 mm) and thickness (6.35 mm); use an ISO-compatible holder rated for DNMG inserts and the specified dimensions. How many usable cutting edges are available per insert? With a double-sided chipbreaker and the rhombic design, the insert provides multiple usable edges through indexing, delivering economical usage and reduced tooling costs. Why is the cylindrical hole important? The cylindrical hole ensures secure clamping and proper orientation in standard clamping systems, improving stability and repeatable seating in the toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9205 Wendeplatten - Tungaloy
Benefit from productive, high‑speed turning with the T9205 CVD‑coated grade and the stable chip control of the 55° rhombic geometry; order through Metav Werkzeuge or consult our specialists for holder compatibility and delivery options. DNMG 150604 T9205 DNMG Turning Insert — CVD‑coated carbide, 55° rhombic (Tungaloy) The DNMG150604 T9205 Tungaloy insert is an ISO‑standard, rhombic 55° turning insert designed for productive external and internal turning of steel under stable machining conditions. CVD‑coated carbide for high wear resistance 55° rhombic geometry for versatile turning Double‑sided, indexable design for cost efficiency Cylindrical‑hole fixation for secure clamping Higher throughput through hardened wear resistance The combination of a CVD‑coating and the T9205 grade carbide gives consistently high wear resistance, which translates into longer tool life and fewer indexings. In practical terms, the coating forms a hard, thermally stable layer that reduces flank and crater wear at elevated cutting speeds. For operations that demand repeatable performance, the hardened surface minimises micro‑chipping and preserves the cutting edge geometry, supporting continuous production runs with predictable change‑over intervals. Geometry and chip control improve surface quality The 55° rhombic geometry and the double‑sided chipbreaker deliver a balance between strength and accessibility for a wide range of turning tasks. A corner radius of 0.4 mm offers reliable edge strength while enabling near‑finish passes; the 6.35 mm plate thickness increases rigidity, reducing vibration in less stable set‑ups. The cylindrical fixing hole improves seat repeatability in compatible holders, resulting in consistent surface finish and tighter dimensional control across batches. System compatibility and practical benefits for the workshop Belonging to the ISO turning insert family, this indexable plate fits standard external holders when form, clearance angle, tolerance class, fastening, size and thickness are matched. The model is aimed at steel turning under stable cutting conditions and supports straightforward process planning: select the T9205 chipbreaker and grade according to workpiece material and cutting strategy to reduce cycle time and tool consumption. The insert’s design helps lower overall tooling costs by offering multiple cutting edges per plate and predictable performance under elevated speeds. Contact Metav Werkzeuge for tailored advice and rapid supply of Tungaloy turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785785 SKU: 6785785-Tungaloy Manufacturer SKU: TUN6785785 Manufacturer: Tungaloy Core data ISO designation: DNMG150604 Grade: T9205 Geometry: 55° Corner radius: 0.4 mm Plate thickness: 6.35 mm Plate size: 15 mm Special features CVD‑coated carbide Rhombic 55° plate form Double‑sided, indexable chipbreaker Cylindrical fixing hole Application: Turning (external and internal) Model series: ISO turning inserts Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials are suitable for this grade? The T9205 CVD‑coated grade is developed for productive turning of steel, offering good wear resistance at higher cutting speeds and stable conditions. What are the key geometry specifications of the insert? The DNMG150604 insert features a 55° rhombic form with a 0.4 mm corner radius and a 6.35 mm thickness, optimised for a mix of finishing and medium‑depth turning. Is the insert indexable and reversible? Yes, the plate is double‑sided and indexable, providing multiple cutting edges to improve economy per component produced. Does the insert require a special holder or clamp? Holder compatibility depends on plate form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and repeatable seating. What advantages does the CVD coating bring in production? The CVD layer increases thermal stability and wear resistance, reducing flank and crater wear at higher speeds and extending usable tool life. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, a 0.4 mm corner radius and ISO rhombic geometry for productive medium-steel turning; compatibility is ensured when holder form, relief angle and clamping match. Order the DNMG150604 T9215 insert directly via Metav Werkzeuge or consult the technical advisers for holder compatibility and application guidance. DNMG150604 T9215 — ISO indexable turning insert, 55° rhombic, Tungaloy A DNMG150604 T9215 indexable insert engineered for external and internal turning, optimised for medium-steel machining and suitable for continuous to lightly interrupted cuts. ISO rhombic insert, 55° cutting angle CVD-coated carbide grade T9215 0.4 mm corner radius for accurate profiling Double-sided chipbreaker with cylindrical centre hole Consistent wear resistance for productive medium-steel turning The insert combines a CVD-coated carbide substrate with the T9215 grade, which delivers a balance of high wear resistance and fracture toughness. This results in a stable cutting edge under sustained loads and supports higher material removal rates in continuous or lightly interrupted operations. The CVD coating (chemical vapour deposition) forms a thin, hard surface layer that reduces adhesion and abrasion between tool and workpiece; in practice this means longer intervals between indexings and fewer unplanned tool changes, contributing directly to process economy and predictable cycle times. Geometry and clamping that ensure repeatable results The ISO rhombic form with a 55° cutting angle and a nominal 6.35 mm thickness provides a robust platform for general turning tasks. The specified 0° relief and the cylindrical centre hole determine compatibility with ISO holders — compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness. Correct matching of insert and holder minimises vibration and secures repeatable tool position, which improves surface finish and dimensional stability in serial production. The 15 mm major size keeps the insert compact while offering secure clamping. Improved chip control and surface quality through tailored edge design The double-sided chipbreaker on this insert is designed to control chip flow for medium-steel grades, reducing the risk of entangling chips and supporting uninterrupted production. The modest 0.4 mm corner radius balances edge strength and the ability to produce consistent profiles; a larger radius increases edge life but may raise cutting forces, while a fine radius yields a better surface finish but can be more susceptible to edge chipping. By choosing this radius and the appropriate chipbreaker, the system delivers a reliable compromise between tool life and surface integrity. Shop-floor guidance for reliable application For consistent performance on the shop floor, select the insert in combination with a holder that meets ISO mounting standards and is rated for the intended stability class. The grade is especially suitable for medium-steel workpieces in general turning and facing operations under steady cutting conditions. Indexing the insert to use both sides extends effective life and reduces tooling costs per part. When optimising cutting data, focus on stable fixturing and incremental increases in feed or speed while monitoring edge wear; the T9215 grade tolerates increased throughput once the setup proves stable. For stock availability, application recommendations for Tungaloy’s T9215 grade and technical assistance contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — technical advisers are available to review holder compatibility and machining parameters. Technical Data Article number: 6773905 SKU: 6773905-Tungaloy Manufacturer SKU: TUN6773905 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Application: Turning Facts Size: 15 mm Thickness: 6.35 mm Cutting angle: 55° Clearance/relief angle: 0° Corner radius: 0.4 mm Hole style: cylindrical centre hole Double-sided: yes Special features Grade T9215, CVD-coated carbide Rhombic insert, 55° geometry Double-sided chipbreaker Compatible with ISO holders for external and internal turning Suited to continuous to lightly interrupted cuts FAQ What materials is this insert suited for? The DNMG150604 T9215 insert is specified for medium-steel machining; the T9215 CVD-coated carbide grade provides wear resistance and fracture toughness appropriate for this material class. How does the chipbreaker affect performance? The double-sided chipbreaker on this indexable insert promotes controlled chip formation for medium steels, improving evacuation and reducing the likelihood of chip-related interruptions. Can the insert be used in both external and internal turning? Yes — the rhombic ISO geometry and cylindrical centre hole allow compatibility with holders designed for both external and internal turning, provided the holder matches the insert’s form and tolerance class. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius offers a compromise between edge strength and surface quality: it helps maintain dimensional accuracy while giving adequate edge robustness for general turning tasks. Which SKU should be ordered for this item? Order using SKU 6773905-Tungaloy or manufacturer SKU TUN6773905 to ensure the correct DNMG150604 T9215 indexable insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9215 Wendeplatten - Tungaloy
The blend of CVD‑coated carbide (T9215) and a 55° rhombic geometry delivers stable cutting and long tool life for medium steel turning; the double‑sided chipbreaker and cylindrical hole ensure secure mounting and cost‑effective edge utilisation. Order directly via Metav Werkzeuge or consult our technical advisers for compatibility with specific holders. DNMG 150604 T9215 (Turning) — Tungaloy indexable insert, 55° rhombic A DNMG150604 T9215 indexable insert for turning, engineered for productive mid‑range steel machining with robust CVD‑coated carbide performance CVD-coated carbide for high wear resistance ISO 150604 rhombic insert, 55° cutting angle Double-sided chipbreaker for flexible use Cylindrical hole for secure mounting Stable geometry for consistent surface quality and tool life The rhombic 55° cutting geometry and a 0.4 mm radius combine to provide a balance between edge strength and surface finish. The zero‑degree relief specification listed as 0° relief helps to control cutting forces in many turning setups, while the ISO conformity simplifies selection within standard toolholder systems. These geometric choices result in secure mounting and predictable chip flow, which together reduce rework and improve part consistency during serial production. Coating and substrate optimised for medium steel productivity The T9215 grade is CVD‑coated on a carbide substrate and is specified as a first choice for medium steel machining. Its formulation prioritises wear resistance and fracture toughness, making it suitable for continuous to lightly interrupted cuts. The net effect is higher productivity through extended edge life and fewer insert changes, supporting longer uninterrupted machining cycles and more efficient use of machine uptime. Practical system features for workshop efficiency and economy Designed as an ISO indexable insert, this plate fits into a matching holder with appropriate shim and clamping components; the system relies on correct form, clearance and tolerance for safe use. The 6.35 mm plate thickness and 15 mm plate size give dimensional stability, while the double-sided chipbreaker enables two cutting edges per insert, delivering a clear economical benefit by lowering cost per edge and reduced downtime for replacements. The cylindrical hole and standard fixing ensure repeatable positioning and fast changeovers in routine workshop practice. For high‑throughput turning with Tungaloy's T9215 grade, contact Metav Werkzeuge for ordering and compatibility advice — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Manufacturer article number: 6773893 Manufacturer SKU: TUN6773893 SKU: 6773893-Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts Cutting angle: 55° Corner radius: 0.4 mm Relief angle: 0° Thickness: 6.35 mm Plate size: 15 mm Special features Coating/sort: T9215 (CVD‑coated) Chipbreaker: double‑sided Plate form: rhombic Hole: cylindrical hole Application: turning Compatibility: ISO insert, requires matching holder, shim and clamping screws FAQ Which materials is this insert best suited for? The T9215 grade is formulated for medium steel applications; the DNMG150604 T9215 insert combines CVD coating and a carbide substrate to deliver wear resistance appropriate for continuous to lightly interrupted steel turning. Can the insert be used on interrupted cuts? Yes, the insert is suitable for continuous and lightly interrupted cuts; for heavy interruptions, selecting a geometry and clamping system matched to the machining conditions is recommended. How many cutting edges are available per insert? Thanks to the double‑sided chipbreaker design, each insert provides two usable cutting edges, improving cost efficiency and reducing changeover frequency for routine turning tasks. What holder features are required for correct mounting? The ISO compatibility requires a holder with matching form, clearance, tolerance class and appropriate clamping hardware; the cylindrical hole ensures repeatable locating once the correct holder and shim are used. Does the insert support fine surface finishes? The combination of the rhombic 55° geometry and a 0.4 mm radius supports stable cutting and good surface quality for many turning operations, particularly in medium steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T9215, precise 55° rhombic geometry and a robust 6.35 mm plate thickness for reliable, high‑productivity turning operations; order the insert directly via Metav Werkzeuge or ask our consultants for matching holder recommendations. DNMG150604 T9215 — ISO turning insert for turning (Tungaloy) DNMG150604 T9215 is an ISO‑standard indexable insert designed for external and internal turning, optimised for medium steel machining. CVD‑coated carbide T9215 55° rhombic geometry for stable cutting Double‑sided chipbreaker, with hole 0.4 mm corner radius for fine finishes Higher productivity thanks to wear‑resistant grade and stable chip control The CVD‑coated carbide grade T9215 combines elevated wear resistance with good fracture toughness, making it a reliable choice for continuous to slightly interrupted cutting in medium steel. This composition reduces flank wear and extends cutting edge life, which in turn lowers tool change frequency and improves overall throughput. The double‑sided chipbreaker assists in predictable chip formation, reducing the risk of chip entanglement and enabling steadier cycle times on production runs. Secure mounting and ISO compatibility reduce setup uncertainty As an ISO‑standard turning insert, compatibility with holders and boring bars is determined by form, relief angle, tolerance class, fastening, size and thickness. The insert’s central cylindrical hole facilitates straightforward clamping with standard screws and underlays, ensuring consistent seating and repeatable positioning. Specifying ISO‑compliant components simplifies inventory and setup, which aids process stability and reduces downtime during tool changes. Geometry tuned for surface quality and rigidity The rhombic shape with a 55° included angle delivers a strong cutting edge suitable for general turning operations while enabling access to shoulder and profile areas. A 0.4 mm corner radius balances edge strength and surface finish, producing smooth external faces without compromising edge life. The substantial 6.35 mm plate thickness increases stiffness at the cut, lowering chatter risk and supporting higher metal removal rates when paired with an appropriate holder and machine rigidity. Practical guidance for application and process optimisation Designed primarily for turning of medium‑strength steels, the insert performs best under continuous cuts or light interruptions where the strong CVD coating and carbide substrate can exploit steady cutting conditions. Use a holder that offers adequate support and ensure correct clamping torque to preserve seat integrity. For mixed batch work the reversible, double‑sided design provides economical indexing options, while the ISO form keeps replacement simple and repeatable across different machines. Contact Metav Werkzeuge for tailored holder and grade recommendations for Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application specifics and compatible tooling. Technical data Article number: 6796076 Manufacturer SKU: TUN6796076 SKU: 6796076-Tungaloy Name: DNMG150604 T9215 Tungaloy turning insert Facts Corner radius: 0.4 mm Included angle: 55° Relief angle: 0° Thickness: 6.35 mm Size: 15 mm Special features CVD‑coated carbide (T9215) Double‑sided chipbreaker Rhombic insert shape With cylindrical hole ISO‑standard turning insert series Suitable for external and internal turning Compatible with ISO holders (form, relief, tolerance, fastening, size, thickness) Intended for medium steel; continuous to slightly interrupted cuts FAQ What materials is this insert intended for? The DNMG150604 T9215 insert is specified for medium steel machining and delivers a good balance of wear resistance and fracture toughness for continuous to lightly interrupted cuts. How is the insert secured in the holder? Mounting uses the central cylindrical hole together with the appropriate underlay and clamping screw; the ISO‑compliant form ensures consistent seating in compatible holders. How many cutting edges are available before indexing? The indexable design is double‑sided, allowing multiple indexings; the exact number of edges depends on the insert orientation and the holder system used with the DNMG150604 T9215. Is the grade T9215 suitable for interrupted cuts? T9215 provides good fracture resistance and performs acceptably in slightly interrupted conditions, though heavy interruptions may favour more robust grades. Does the 0.4 mm corner radius affect surface finish? A 0.4 mm radius offers a compromise between edge strength and surface quality, producing fine finishes while maintaining acceptable edge life under normal turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 T9215 Wendeplatten - Tungaloy
Combining a CVD-coated carbide T9215 grade with a rhombic 55° geometry and a 0.4 mm corner radius delivers long tool life, stable edge performance and consistent chip control for medium-steel turning; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. DNMG150604 T9215 turning insert — CVD-coated carbide by Tungaloy DNMG150604 T9215 is an ISO-indexed turning insert optimised for medium-steel machining and high-productivity turning applications. CVD-coated carbide grade T9215 Rhombic 15 mm plate design 0° clearance, 55° lead angle Double-sided chipbreaker, cylindrical hole Engineered for reliable high productivity in medium-steel turning The CVD-coated carbide grade T9215 combines wear resistance with enhanced breakage resistance, making it a primary choice for continuous to lightly interrupted cuts in medium-steel applications. Its material formulation supports sustained cutting under production loads, which translates into fewer index changes and reduced process interruptions. By selecting this grade the machining process benefits from improved consistency and less unplanned downtime, supporting higher overall throughput without compromising component quality. Geometry that stabilises cutting, chip control and repeatability Designed in a rhombic form with a 55° lead angle and a 0° clearance, the insert's geometry promotes steady tool engagement and favourable chip flow for external and internal turning. The 0.4 mm corner radius balances edge strength with surface finish capability, while the double-sided chipbreaker aids controlled chip formation across varying depths of cut. The cylindrical hole and ISO-compliant dimensions ensure secure clamping and interchangeability with compatible holders; compatibility depends on form, clearance, tolerance class, fastening method, size and thickness. Practical system benefits and recommended use cases As part of an ISO turning system, the indexable plate works with a matching outer holder or boring bar, plus the appropriate shim/clamp set and spare screws for a complete tooling solution. Its configuration is particularly suited to medium-steel components where productive, repeatable machining is required; selecting the correct chipbreaker and grade according to workpiece stability and cutting conditions optimises tool life and surface quality. For manufacturers seeking predictable performance, the combination of ISO standardisation, robust coating technology and consistent geometry supports efficient process planning and reproducible results. For tailored application advice or stock enquiries for the Tungaloy DNMG150604 T9215 insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best setup for the intended machining task Technical data Article number: 6944628 SKU: 6944628-Tungaloy Manufacturer SKU: TUN6944628 Brand: Tungaloy Name: DNMG150604 T9215 Core specifications Corner radius: 0.4 mm Insert size: 15 mm Thickness: 6.35 mm Lead angle: 55° Clearance angle: 0° ISO designation: 150604 Features Material: Carbide Coating/grade: T9215 (CVD-coated) Plate shape: Rhombic Hole style: Cylindrical, with hole Chipbreaker: Double-sided Application: Turning System: ISO turning insert FAQ What materials is this insert best suited for? The DNMG150604 T9215 turning insert is optimised for medium-steel machining, where the T9215 grade provides a balanced combination of wear resistance and fracture toughness. Is the T9215 grade suitable for interrupted cuts? Yes; the CVD-coated T9215 grade on the DNMG150604 insert is designed to handle continuous to lightly interrupted cuts while maintaining edge stability. What are the critical dimensions to check for holder compatibility? Key dimensions include the ISO designation 150604, the 15 mm size, 6.35 mm thickness and the cylindrical hole; these determine fit with compatible holders and clamping systems. Can the insert be indexed to use the second cutting edge? The DNMG150604 insert is double-sided and can be indexed to present the alternate cutting edge, extending service life before replacement is required. Which chipbreaker should be selected for improved chip control? The built-in double-sided chipbreaker of the DNMG150604 supports controlled chip formation; match the chipbreaker profile and grade with workpiece stability and cutting parameters for optimal results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, robust 55° rhombic geometry and dependable double-sided chip control for steady, high-productivity turning. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our technical advisors for fitment and process settings. DNMG 150604 T9215 — Rhombic turning insert for turning, by Tungaloy The DNMG150604 T9215 is an ISO-standard rhombic turning insert designed for medium steel machining, offering a CVD-coated carbide grade and a double-sided chipbreaker for productive, continuous to lightly interrupted cuts CVD-coated carbide grade T9215 Optimised for medium steel productivity Rhombic 55° geometry with 0° clearance Double-sided insert with cylindrical hole Consistent productivity through a wear-resistant grade The CVD-coated carbide grade T9215 combines high wear resistance with good fracture toughness, making it a reliable choice for medium steel machining where prolonged tool life and steady cutting speeds are required. The CVD coating (chemical vapour deposition) forms a hard protective layer that reduces flank and crater wear, which in practice means fewer insert changes and more uninterrupted production time. Selecting this insert supports higher metal removal rates while maintaining acceptable tool life under continuous or slightly interrupted cutting conditions. Secure geometry and dimensions for repeatable accuracy With a 55° rhombic geometry and a 0° clearance angle, the insert delivers secure seating and consistent cutting engagement, improving surface integrity and dimensional stability on turning operations. The 0.4 mm corner radius and 6.35 mm thickness contribute to edge strength and vibration damping, which helps when machining longer parts or less rigid setups. Compatibility with the chosen holder depends on form, relief angle, tolerance class, fastening method, size and thickness, so pairing the insert with a suitable external holder or boring bar ensures repeatable clamping and reproducible results. System integration and application focus for efficient use The ISO-format insert integrates into a standard turning system comprised of the insert, a matching external holder or boring bar, the required shim or clamp set and replacement screws. The double-sided chipbreaker design supports efficient chip control and economical use of cutting edges, since both sides can be indexed. This makes the insert particularly practical for batch production and mixed-series turning where consistency and tool economy are priorities. For customers seeking to broaden material coverage, this grade is primarily intended for medium steel but benefits processes where balance between productivity and tool life is required. For high-productivity medium steel turning with the proven T9215 grade, contact Metav Werkzeuge for precise holder matching and to order genuine Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772242 SKU: 6772242-Tungaloy Manufacturer SKU: TUN6772242 Name: DNMG150604 T9215 Tungaloy-Wendeplatte Core specifications Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 55° Designs and special features CVD-coated carbide Rhombic insert form Double-sided chipbreaker Cylindrical hole for secure mounting ISO-series turning insert suitable for external and internal turning Intended for continuous to light interrupted cuts FAQ What materials is this insert best suited for? The DNMG150604 T9215 insert is designed as a first-choice grade for medium steel machining, offering a balance of wear resistance and breakage safety for productive turning. How does the CVD coating benefit performance? A CVD-coated carbide insert such as the T9215 provides a hard surface layer that reduces abrasive wear and improves resistance to thermal and chemical wear mechanisms during turning. Can the insert be used on interrupted cuts? Yes, the T9215 grade is suitable for continuous to lightly interrupted cuts; however, secure clamping and the correct holder selection are important to avoid edge chipping. What determines whether the insert fits a specific holder? Fitment depends on the insert form, relief/clearance angle, tolerance class, fastening method, size and thickness; the system should include a compatible external holder or boring bar plus the correct shim/clamp set Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, a 0.4 mm corner radius and robust rhombic geometry for consistent productivity in medium steel turning; order genuine Tungaloy inserts via Metav Werkzeuge or request consultant support for holder matching. DNMG 150604 T9215 turning insert (ISO) by Tungaloy — rhombic, 55° cutting angle DNMG150604 T9215 Tungaloy insert for ISO-compliant turning applications, designed for reliable external and internal machining of medium steels with double-sided indexing and a cylindrical hole for secure clamping CVD-coated carbide T9215 Optimised for medium steel turning Rhombic insert with 55° cutting angle Double-sided chipbreaker, cylindrical hole Extended tool life and consistent machining for medium steels The CVD-coated carbide in grade T9215 combines high wear resistance with improved fracture resistance, making it a preferred choice for the mid-range machining of steel where productivity and tool life must be balanced. The chemical vapour deposition layer provides a hard, thermally stable barrier that reduces flank wear and resists adhesion at elevated cutting temperatures. As a result, process stability is increased during continuous and lightly interrupted cuts, reducing the frequency of indexing and insert changes while maintaining surface quality and dimensional repeatability. Secure clamping and ISO-compatible geometry for predictable performance Constructed to ISO form and tolerance conventions, the rhombic geometry with a 55° included angle and a cylindrical hole enables reliable fitment in standard external holders and boring bars. The double-sided design offers two cutting edges per index, improving cost efficiency per edge. Key mechanical dimensions — a 6.35 mm plate thickness, 15 mm size, and a 0.4 mm corner radius — provide a compromise between edge strength and achievable surface finish. Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; correct matching to a holder secures repeatable cutting conditions and reduces vibration-related edge damage. Practical guidance to increase productivity and surface quality Selecting the appropriate chipbreaker and machining parameters is decisive: the double-sided breaker integrated into this insert promotes stable chip control for medium steels and helps maintain a consistent cutting force. The 0.4 mm corner radius supports good surface finish at moderate depths of cut while preserving edge strength under interrupted engagement. For best results, choose feed and speed settings aligned with the workpiece grade and machining stability; the insert’s design and T9215 substrate are engineered to deliver high productivity in routine turning and light interrupted operations without compromising process reliability. For holder recommendations and to secure original Tungaloy inserts, contact Metav Werkzeuge for tailored technical advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6796036 Manufacturer SKU: TUN6796036 SKU: 6796036-Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts Shape/size: rhombic, 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Cutting angle: 55° Clearance angle: 0° Hole: with cylindrical hole Special features Grade/coating: T9215, CVD-coated Chipbreaker: double-sided Application: turning (external and internal) Indexable, two cutting edges per side ISO-compliant insert designation DNMG150604 FAQ What materials is this insert suitable for? The DNMG150604 T9215 Tungaloy insert is optimised for medium steel machining and provides good wear and fracture resistance for continuous to slightly interrupted cuts. How is the insert clamped in the holder? Clamping is via the cylindrical hole and standard ISO holder interfaces; compatibility requires correct match of form, relief angle, tolerance class, size and thickness. What are the key dimensions that affect cutting stability? The insert’s 6.35 mm thickness, 15 mm size and 0.4 mm corner radius influence edge strength and finish, contributing to predictable machining results when paired with an appropriate holder. Is the coating suitable for high-temperature cutting? The CVD coating on the T9215 grade offers thermal stability and reduced adhesion, supporting higher cutting temperatures typical in productive turning operations. Can this insert be used for interrupted cuts? Yes, the combination of T9215 substrate and the insert geometry is suitable for continuous and lightly interrupted cutting; heavier interruptions should be evaluated against process stability and holder rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9215 Wendeplatten - Tungaloy
Take advantage of a durable, CVD‑coated carbide grade that combines high wear resistance with good fracture toughness for reliable productivity. The ISO geometry ensures straightforward replacement in standard holders while the rhombic form and 0.4 mm corner radius deliver precise finishing on medium steels. Order the DNMG 150604 T9215 turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150604 T9215 Turning indexable insert (Tungaloy) DNMG150604 T9215 is a rhombic ISO turning insert designed for external and internal turning in medium steel applications, offering a CVD‑coated carbide grade for high productivity. ISO‑compatible geometry for easy replacement CVD‑coated carbide grade T9215 Rhombic form with 0.4 mm corner radius Double‑sided chipbreaker for flexible use High wear resistance for sustained productivity The T9215 grade is a CVD‑coated carbide specifically formulated for medium steel machining; it balances wear resistance and fracture toughness to maintain tool life under continuous or lightly interrupted cuts. This combination reduces unscheduled tool changes and supports predictable cycle times, which is crucial for batch production and shopfloor efficiency. Explaining the grade in practical terms: the coating protects the cutting edge at elevated temperatures and the substrate provides the mechanical strength to resist chipping during steady turning operations. ISO geometry and dimensions that simplify tool selection The DNMG150604 geometry follows ISO standards, so compatibility with a toolholder is determined by shape, relief angle, tolerance class, clamping method, size and thickness. Key dimensions: 15 mm inscribed circle, 6.35 mm thickness and 0.4 mm corner radius; the insert presents a 55° approach angle and a 0° relief angle and is supplied with a cylindrical hole for secure mounting. These measurable values help engineers and buyers match inserts to existing holders and to predict the machining outcome: a small corner radius aids fine surface finishes, while the 55° geometry supports effective cutting edge strength. System advantages and practical application advice As part of a system consisting of the insert, a compatible external holder or boring bar, a shim/clamping set and replacement screws, this insert delivers operational flexibility. The double‑sided chipbreaker extends usable life and permits economical indexation; choosing the correct chipbreaker and grade for the workpiece and rigidity of the setup is essential. For medium steels, this grade offers a reliable starting point: if encountering heavier interruptions or unusually abrasive materials, select a more robust grade or adjust feed and speed. For further specification checks, technical drawings or tailored recommendations, contact the supplier or engineering team for machining parameter guidance. For applications requiring consistent throughput and predictable tool life, contact Metav Werkzeuge for availability, technical advice and order support — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772263 SKU: 6772263-Tungaloy Manufacturer SKU: TUN6772263 Model series: ISO-Drehwendeschneidplatten Application: Turning Dimensions & core data Inscribed circle / size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Approach angle: 55° Relief angle: 0° Design & special features Rhombic plate form Cylindrical hole for fixing Double‑sided chipbreaker CVD‑coated carbide grade T9215 ISO standard compatibility (holder fit by form, clearance, tolerance, clamping, size, thickness) FAQ What materials is this insert suitable for? The DNMG150604 T9215 insert by Tungaloy is optimised for medium steel machining, combining wear resistance and toughness for continuous to lightly interrupted cuts. How does the DNMG150604 code relate to geometry? The code DNMG150604 indicates the rhombic insert form, size and geometry; the specification DNMG150604 T9215 identifies this ISO‑standard turning insert and its T9215 carbide grade. Can this insert be used in existing ISO holders? Yes — the insert follows ISO geometry; compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness. What benefit does the double‑sided chipbreaker provide? A double‑sided chipbreaker increases indexation options and overall economy by extending the number of usable cutting edges before replacement. What is the correct way to secure the insert? Use a matching external toolholder or boring bar with the appropriate shim/clamping set and replacement screws; the DNMG150604 has a cylindrical hole for secure fixing and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com