DNMG 150604 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that combines high wear resistance with fracture safety for productive turning in medium steels; paired with a rhombic 55° geometry and a 0.4 mm nose radius this solution supports consistent surface quality and stable chip control. Order directly via Metav Werkzeuge or consult the Metav team for application-specific recommendations. DNMG 150604 T9215 Turning insert by Tungaloy — CVD-coated carbide, rhombic 55° The DNMG150604 T9215 Tungaloy insert is an ISO-standard rhombic indexable insert for external and internal turning, optimised for medium-steel machining and designed for continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 Optimised for medium steel machining Rhombic 55° geometry, 0° clearance 0.4 mm nose radius, 6.35 mm thickness Higher productivity through engineered coating and grade The core advantage of the T9215 grade is its CVD-coated carbide construction, which offers a balance of wear resistance and fracture toughness. For production environments where cycle time matters, this combination reduces tool-change frequency and maintains cutting performance during longer uninterrupted runs. The coating supports stable cutting temperatures and extended edge life, meaning fewer interruptions and a more predictable process window for medium-steel components. Consistent dimensions and geometry for repeatable results Built to ISO standard, the rhombic form with a 55° lead and 0° clearance delivers a predictable cutting direction and chip flow, which assists in achieving repeatable component tolerances. The 0.4 mm nose radius aids in surface finish without compromising strength at the cutting edge, and the 6.35 mm thickness contributes to robust seating in the holder. Compatibility with the holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so pairing with a matching clamping set and support pad is essential for consistent accuracy. System reliability and efficient chip control This insert is supplied with a double-sided chipbreaker and a cylindrical hole for secure mounting, making it suitable for indexable use and straightforward reorientation when an edge is consumed. Within a complete system — insert, corresponding external holder or boring bar, and proper clamping kit — the solution reduces downtime and supports stable cutting, even under slightly interrupted conditions. The design focus is on predictable chip control and dimensional stability, which translates into fewer reworks and steadier throughput in serial production. For dependable medium-steel turning choose the Tungaloy DNMG150604 in T9215 grade; contact Metav Werkzeuge for tailored application advice or to request detailed cutting data via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6950968 Manufacturer SKU: TUN6950968 Label / SKU: 6950968-Tungaloy Model series: ISO-Drehwendeschneidplatten Measurements Thickness: 6.35 mm Corner radius: 0.4 mm Insert size: 15 mm Lead angle: 55° Clearance angle: 0° Materials & features Material: carbide Coating / grade: CVD-coated, T9215 Form: rhombic Hole style: with cylindrical hole Chipbreaker: double-sided Application: Turning System: ISO-standard indexable insert FAQ Can this insert be used for both external and internal turning? Yes. The DNMG150604 T9215 turning insert is specified for both external and internal turning operations when paired with a suitable external holder or boring bar. Which workpiece materials is the grade suited to? The T9215 grade is a first choice for medium steel machining, combining wear resistance and fracture safety for productive, continuous to lightly interrupted cuts. How is compatibility with the toolholder ensured? Compatibility depends on insert form, clearance angle, tolerance class, fastening, size and thickness; the DNMG150604 designation and the ISO standard guide selection of the correct holder and clamping set. What benefits does the CVD coating provide? The CVD-coated carbide construction of the T9215 grade improves wear resistance and thermal stability, supporting longer edge life and consistent cutting performance in production turning. Is the insert indexable on both sides? The design includes a double-sided chipbreaker and a central hole for secure mounting, allowing the insert to be indexed and reoriented to use additional cutting edges. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215 and a 55° rhombic geometry to increase throughput in medium-steel turning while maintaining tool life; order the insert directly via Metav Werkzeuge or contact the technical team for application support. DNMG150604 T9215 Tungaloy turning insert — DNMG 150604 for turning A DNMG150604 T9215 indexable turning insert designed for efficient external and internal turning in medium-steel applications, offering robust wear resistance and reliable chip control. CVD-coated carbide grade T9215 Suitable for medium steel machining Rhombic 55° geometry, 0° clearance Double-sided with cylindrical hole Maximise productivity in medium-steel turning The CVD coating on this carbide grade delivers a balanced combination of wear resistance and impact toughness, making it particularly effective for continuous to mildly interrupted cuts in medium steel. The coated substrate reduces flank and crater wear, which extends effective cutting life and lowers tooling costs per part. By choosing a grade engineered for steady, productive machining, cycle times can be shortened without sacrificing surface quality, leading to a measurable improvement in throughput for production lines that process comparable components. Reliable fit and versatile geometry for stable machining The rhombic geometry with a 55° included angle provides a versatile cutting edge for both external and internal turning operations, while the 0° clearance supports predictable chip formation and dimensional control. Compatibility with holders is governed by form, clearance angle, tolerance class, fastening method, size and thickness; this means the insert integrates into standard ISO holder systems when these parameters match. The cylindrical hole and double-sided design support secure clamping and economical edge utilisation, contributing to repeatable results across batches. Consistent chip control and straightforward grade selection This insert features a double-sided chipbreaker tailored for medium-steel cutting, improving chip evacuation and reducing the risk of entanglement on longer cuts. The T9215 grade is a first choice when a balance of high wear resistance and fracture resistance is required; it suits operators who prioritise steady productivity and reduced downtime. For shops with varying workpiece stability, selecting the appropriate chipbreaker and grade helps maintain surface finish and tool life, translating into lower rework rates and more predictable production planning. For availability and application-specific recommendations on Tungaloy T9215 turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice. Technical data Article number: 6773902 SKU: 6773902-Tungaloy Manufacturer SKU: TUN6773902 Model series: ISO turning inserts Material: carbide Grade/coating: T9215 (CVD-coated) Facts ISO designation: 150604 Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° Special features Rhombic insert shape (DNMG) Double-sided chipbreaker Cylindrical hole for secure clamping Designed for external and internal turning Compatibility depends on holder form, clearance, tolerance, fastening, size and thickness Suited to medium-steel machining and continuous to lightly interrupted cuts FAQ What materials is this insert suitable for? The DNMG150604 T9215 insert is optimised for medium steel machining thanks to its CVD-coated carbide composition and chipbreaking geometry, ensuring consistent wear performance. How does the T9215 grade improve productivity? The T9215 CVD-coated grade combines wear resistance with fracture toughness, enabling longer tool life and steady cutting speeds, which helps boost throughput with the DNMG150604 insert. Is this insert compatible with standard ISO holders? Compatibility is achieved when holder form, clearance angle, tolerance class, fastening, size and thickness match the insert; the DNMG150604 follows ISO norms and fits holders designed for rhombic 55° inserts. How many usable edges does the insert offer? This double-sided DNMG insert provides economical edge usage by offering multiple indexed cutting edges before replacement is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide T9215 and ISO rhombic geometry delivers efficient, high-productivity turning for medium steels while ensuring reliable edge life under continuous to lightly interrupted cuts; order the insert directly via Metav Werkzeuge or consult the technical team for matching holders and clamping options. DNMG 150604 T9215 — DNMG150604 rhombic turning insert (ISO) by Tungaloy The DNMG150604 T9215 is an ISO-standard rhombic turning insert designed for medium-steel machining, featuring a CVD-coated carbide grade optimised for productive, continuous to lightly interrupted turning. ISO rhombic insert DNMG150604 CVD-coated carbide grade T9215 Double-sided chipbreaker for turning 55° geometry, 0.4 mm corner radius Productivity and process security for medium-steel turning The insert is engineered for productive medium-steel turning by combining a wear-resistant CVD coating with a robust carbide substrate. The T9215 grade provides a balance of wear resistance and fracture toughness, which reduces downtime from premature edge failure and supports longer tool cycles. Compatibility with standard ISO holders is governed by form, relief angle, tolerance class, clamping and thickness; this ensures straightforward integration into existing tool systems and consistent results in serial production. Consistent surface quality and edge stability A 55° rhombic geometry and a 0.4 mm corner radius deliver stable cutting engagement and predictable chip formation, particularly when paired with the integrated double-sided chipbreaker. These features help to maintain dimensional accuracy and surface finish during external or internal turning operations. The insert’s 6.35 mm plate thickness and cylindrical hole support secure clamping, which translates into reduced vibration and improved repeatability on demanding turning tasks. System-oriented handling and economical use The ISO-design insert is part of a modular system: the ISO insert, a matching external holder or boring bar, clamping set and replacement screws form a complete cutting assembly. The double-sided layout allows indexable use, extending usable life per insert and offering cost-effective stock management. Selection of the appropriate chipbreaker and grade should be matched to workpiece stability and machining strategy to unlock maximum productivity from the carbide grade. For reliable medium-steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for tailored advice and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772217 Manufacturer SKU: TUN6772217 SKU: 6772217-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Measurements Geometry / designation: DNMG150604 Angle: 55° Plate size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Design & features Grade: T9215 (CVD-coated carbide) Shape: Rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning FAQ Is this insert suitable for steel machining? The DNMG150604 T9215 insert is specified as a first choice for medium steel machining; the CVD-coated carbide provides wear resistance and toughness for continuous to lightly interrupted cuts. How is compatibility with holders determined? Compatibility depends on insert form, relief angle, tolerance class, clamping method, size and thickness; the DNMG150604 geometry matches standard ISO holders when these parameters align. Can the insert be indexed to a fresh cutting edge? The insert features a double-sided chipbreaker and indexable design, allowing rotation to fresh edges as part of economical tool use strategies. What advantages does the T9215 grade offer? T9215 combines high wear resistance with fracture toughness to support productive machining and longer edge life on medium steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9215 Wendeplatten - Tungaloy
High wear resistance and stable chip control make the DNMG150604 T9215 an efficient, cost-effective choice for medium steel turning; its rhombic 55° geometry and 0.4 mm nose radius support consistent surface finish and productivity. Order the insert directly via Metav Werkzeuge or consult their advisors for holder compatibility and process optimisation. DNMG150604 T9215 Tungaloy indexable insert for turning — CVD-coated carbide, rhombic 55° The DNMG150604 T9215 is an ISO-standard indexable insert designed for general turning applications, offering robust performance for continuous to lightly interrupted cuts in medium steel. CVD-coated carbide for high wear resistance Double-sided chipbreaker for consistent chips Rhombic insert, 55° cutting edge angle 0.4 mm nose radius for medium finishing Consistent productivity through advanced grade and coating The combination of a CVD-coated carbide grade and the T9215 designation provides high wear resistance while maintaining fracture toughness, which is essential for reliable serial production. As an ISO indexable geometry, this insert is intended for stable turning tasks where steady tool life and predictable tool-change intervals improve overall process efficiency. Choosing this grade reduces unscheduled stoppages and lowers per-part tooling costs, delivering measurable benefits to production planning and throughput. Secure mounting and ISO compatibility for straightforward integration Supplied as an ISO-standard rhombic insert with a cylindrical hole, the component is compatible with a wide range of standard turning holders; compatibility is governed by form, relief angle, tolerance class, fastening method, size and thickness. The 55° cutting edge angle gives a balanced approach between access to the workpiece and cutting-edge strength, while the 0° relief angle and standard thickness simplify retrofitting. Clear specification of these attributes supports procurement and toolroom logistics, avoiding guesswork when matching inserts to holders. Practical advantages on the shop floor and choice guidance A double-sided chipbreaker design and reversible geometry extend usable life through multiple indexations, supporting economic tool usage without sacrificing surface quality. The 0.4 mm radius provides a compromise between finishing ability and edge robustness, suitable for medium finishing and general turning. For best results, select the chipbreaker and grade in relation to material, machining stability and the nature of the cut; the insert is positioned as a first-choice option for medium steel operations where steady productivity and good surface integrity are priorities. Contact Metav Werkzeuge for tailored selection advice and compatibility checks on the Tungaloy DNMG150604 T9215 insert — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6772224 SKU: 6772224-Tungaloy Manufacturer SKU: TUN6772224 Facts Size: 15 mm Thickness: 6.35 mm Nose radius: 0.4 mm Relief angle: 0° Cutting edge angle: 55° Hole: with hole Hole style: cylindrical hole Special features Grade: T9215 Cutting material: CVD-coated carbide Shape: rhombic Chipbreaker: double-sided Application: Turning Model series: ISO turning indexable inserts FAQ What materials is this insert suitable for? The DNMG150604 T9215 insert is optimised for medium steel machining; the T9215 grade and CVD-coated carbide construction favour wear resistance during continuous to slightly interrupted turning operations. How does the insert mount in standard holders? The insert fits ISO-standard turning holders that accept the rhombic DNMG form; compatibility depends on form, relief angle, tolerance class, fastening, size and thickness — consult Metav Werkzeuge for precise holder matching. Does the double-sided chipbreaker affect tool life? Yes, the double-sided chipbreaker allows multiple indexations and consistent chip control, extending practical tool life while maintaining surface quality for turning applications. What surface finish can be expected with a 0.4 mm radius? A 0.4 mm nose radius balances edge strength and finish capability, delivering reliable medium finishing results in stable turning processes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a robust T9225 grade and a CVD‑coated carbide substrate for extended tool life and stable cutting under variable conditions; the ISO compatibility simplifies integration into existing holders. Order the DNMG150604 T9225 directly via Metav Werkzeuge or ask our consultants if needed. DNMG150604 T9225 – Tungaloy indexable insert for Turning, CVD‑coated carbide DNMG150604 T9225 is an ISO‑standard rhombic, double-sided turning insert designed for medium to heavy Stahl machining, offering sturdy chip control and reliable edge life for interrupted or variable cuts. CVD-coated carbide for enhanced wear resistance Robust universal grade T9225 for Stahl machining Rhombic 55° geometry with 0° clearance angle Double-sided insert with cylindrical hole for secure clamping Consistent cutting performance under variable conditions The combination of a CVD‑coated surface and the T9225 universal grade provides a balance of hardness and toughness that suits fluctuating engagement depths and intermittent cuts common in turning. The carbide substrate supports high temperatures at the cutting edge while the coating reduces abrasive wear; together these features extend tool life and lower replacement frequency. This results in measurable productivity gains and fewer unscheduled tool changes during batch or mixed‑series production, supporting efficient process planning and stable part quality. Secure clamping and precision geometry for reliable finishes The rhombic geometry with a 55° approach angle, 0° clearance and a 0.4 mm corner radius delivers consistent chip formation and predictable contact conditions. The double-sided design doubles available cutting edges, improving cost efficiency per edge, while the cylindrical hole ensures secure clamping in compatible ISO holders and reduces micro‑movement under load. These characteristics translate into improved surface finish and dimensional stability on turned components, particularly where rigidity and vibration damping are critical. Simple integration and broad application scope Engineered as an ISO standard turning insert, the DNMG150604 series integrates with common external holders, adaptors and clamping kits within a typical turning system. Select an appropriate chipbreaker and grade to match the workpiece and machining strategy; the insert is suited to both external and internal turning tasks. The product supports focused rational decisions: efficient edge usage, predictable wear behaviour and straightforward inventory handling, all contributing to a lower overall cost of ownership and enhanced shop‑floor reliability. For reliable medium‑to‑heavy Stahl turning, request detailed specifications or place an order for the DNMG150604 T9225 through Metav Werkzeuge; specialist advice is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data SKU: 6780741-Tungaloy Manufacturer article number: 6780741 Manufacturer SKU: TUN6780741 Model series: ISO‑Drehwendeschneidplatten Core data Insert size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.4 mm Lead/approach angle: 55° Clearance angle: 0° ISO designation: 150604 Special features Shape: rhombic Hole: cylindrical hole Sidedness: double-sided Grade/coating: CVD‑coated carbide (T9225) Application: turning (external and internal) Material: carbide FAQ What machining tasks is this insert suited for? The DNMG150604 T9225 insert is intended for turning operations, suitable for both external and internal turning in medium to heavy Stahl applications where robustness and chip control are required. How does the T9225 grade affect tool life? The T9225 grade combines a tough carbide substrate with a CVD coating to resist abrasive wear and handle variable cutting conditions, which prolongs edge life compared with uncoated alternatives. Is the geometry suitable for finishing passes? With a 55° approach and a 0.4 mm corner radius, the insert offers a balance between strength and surface quality; the geometry supports stable finishing when matched with appropriate feeds and speeds. How many usable edges does the insert provide? As a double-sided indexable insert, the DNMG150604 offers multiple cutting edges, doubling the economy per insert compared with single‑edged alternatives. Which clamping systems are compatible with this insert? Compatibility is defined by form, clearance, tolerance class, fastening and plate dimensions; the DNMG150604 uses a cylindrical hole for secure clamping in standard ISO holders designed for rhombic inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated T9225 carbide and the robust DNMG 55° rhombic geometry for consistent medium‑to‑heavy steel turning. The 0.4 mm nose radius and double‑sided chipbreaker support reliable surface finish and extended edge life; order through Metav Werkzeuge or consult the technical team for machining advice. DNMG 150604 T9225 Tungaloy indexable turning insert for turning – 55° rhombic, CVD‑coated carbide DNMG150604 T9225 is an ISO‑standardised indexable insert for external and internal turning, designed to deliver stable cutting performance in variable engagement conditions CVD‑coated carbide grade T9225 Robust universal grade for medium–heavy steel Rhombic DNMG 55° geometry, 0° clearance Double‑sided chipbreaker with cylindrical hole Reliable performance for medium to heavy steel turning The CVD‑coated carbide composition of this insert provides a balance between wear resistance and toughness, making it suitable for medium‑to‑heavy steel machining. The T9225 grade is formulated to tolerate fluctuating engagement and mildly interrupted cuts, which reduces the risk of premature edge failure under common workshop conditions. Explaining technical choices: a CVD coating improves thermal resistance and reduces flank wear, while the substrate retains necessary toughness for interrupted cuts, so the component life is extended and downtime is reduced. Geometry and edge preparation that stabilise process and surface quality The 55° rhombic DNMG geometry combined with a 0.4 mm nose radius delivers a predictable cutting action and improved surface finish on turned parts. A 0° clearance angle ensures stable contact with the workpiece where rigidity is critical, and the double‑sided chipbreaker provides two usable cutting edges, doubling the effective life before insert changeover. In practice this means fewer insert changes and more consistent part quality across batch runs. System compatibility for straightforward integration into machining centres Presented in the ISO series of turning inserts, the DNMG150604 format is compatible with a wide range of standard external holders and boring bars; compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The cylindrical‑hole design facilitates secure clamping and rapid indexability, enabling efficient tool system setup and predictable repeatability from one insert to the next—an important consideration for production environments seeking minimal set‑up variation. Practical selection guidance and machining benefits For stable, productive machining select the T9225 grade when facing a mix of continuous and slightly interrupted cuts in steel. Choose the 0.4 mm radius for general finishing to medium stock removal; larger radii provide added strength for heavy roughing. The insert’s double‑sided feature and ISO form reduce tooling inventory by offering two indexed edges per insert and wide applicability across turning operations, helping to lower per‑part tooling cost and maintain throughput. For applications demanding dependable medium‑to‑heavy steel turning, request the Tungaloy DNMG150604 T9225 indexable insert via Metav Werkzeuge; technical consultation and ordering assistance are available at Metav Werkzeuge — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical data Manufacturer article number: 6780718 SKU: 6780718‑Tungaloy Manufacturer SKU: TUN6780718 Designation: DNMG150604 T9225 (indexable insert) Facts Geometry angle: 55° Nose radius: 0.4 mm Plate size: 15 mm Plate thickness: 6.35 mm Clearance angle: 0° Special features Material: cemented carbide Coating: CVD Grade: T9225 – universal, robust Plate shape: rhombic (DNMG) Hole style: cylindrical hole (with hole) Chipbreaker: double‑sided Series: ISO‑standard indexable turning inserts Typical use: external and internal turning FAQ What materials is this insert suitable for? The DNMG150604 T9225 insert is designed primarily for steel machining and performs well in medium‑to‑heavy steel turning; the T9225 grade tolerates variable engagement and mildly interrupted cuts. Can the insert be indexed to use multiple edges? Yes, the insert features a double‑sided chipbreaker, allowing two usable cutting edges per insert before replacement or disposal. How does the CVD coating benefit turning performance? The CVD coating on the T9225 grade improves thermal and abrasion resistance during turning, which helps maintain edge integrity and extend tool life under higher cutting temperatures. Is the DNMG150604 compatible with standard holders? DNMG150604 is an ISO‑standard format; compatibility with a holder depends on form, clearance angle, tolerance class, clamping style, size and thickness, but it is intended for common external holders and boring bars. What surface finish can be expected using the 0.4 mm radius? A 0.4 mm nose radius balances strength and finish, typically delivering good surface quality in finishing and medium stock‑removal tasks while maintaining adequate edge strength. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 T9225 Wendeplatten - Tungaloy
Combine the CVD-coated T9225 grade with the ISO rhombic geometry and a reliable double-sided chipbreaker to secure stable tool life and consistent component quality in medium-to-heavy turning. Order the DNMG150604 T9225 Tungaloy indexable insert directly via Metav Werkzeuge or consult the technical team for application-specific selection. DNMG 150604 T9225 — Tungaloy turning insert for turning (55° rhombic) The DNMG150604 T9225 is an ISO-standard rhombic indexable insert engineered for robust medium-to-heavy steel turning, offering a 55° approach angle and a double-sided chipbreaker for adaptable chip control. ISO rhombic 55° geometry CVD-coated carbide T9225 Robust universal grade for steel Double-sided chipbreaker, with hole Stable cutting performance for demanding turning tasks The combination of a CVD-coated surface and a carbide substrate provides a balance between wear resistance and toughness that suits interrupted cuts and variable engagement conditions. The T9225 grade is described as a robust universal sort, optimised for the mid- to heavy-duty machining of steel. This results in predictable flank wear progression and consistent surface finish, reducing unplanned tool changes and improving process stability on batch and single-piece production alike. Clear compatibility and easy integration into ISO tool systems Designed to the ISO indexable insert series, the geometry and dimensions of this rhombic insert determine compatibility with toolholders by form, relief angle, tolerance class, clamping and thickness. The insert is double-sided and supplied with a cylindrical hole for positive locating; a corresponding outer holder or boring bar, shim/clamping set and replacement screw form the complete system. This standardisation simplifies tool inventory and enables rapid insertion exchange to maintain machine uptime. Productivity benefits and cost-efficient tool life Owing to the balanced substrate and the T9225 coating, the insert offers improved wear behaviour under changing cutting conditions. The rhombic 55° approach enables favourable cutting forces for external and internal turning operations, which can permit faster feeds or deeper cuts in stable set-ups. Fewer indexing cycles and longer service intervals translate into a lower effective cost per cutting edge and more predictable machining cycles on turned components. Practical guidance on material choices and chip control Select a chipbreaker and grade to match the workpiece material and machining stability: the double-sided chipbreaker integrated on this insert supports reliable chip segmentation when machining steels and comparable alloys. For newcomers: a chipbreaker is a geometric feature that fragments swarf into manageable lengths, helping evacuation and protecting the workpiece. The 0.4 mm corner radius offers a compromise between edge strength and surface quality for many finishing and semi-finishing passes. For reliable medium-to-heavy turning with Tungaloy’s T9225 grade, contact Metav Werkzeuge for expert selection and rapid availability — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the DNMG150604 T9225 and compatible tooling options. Technical data Article number: 6780788 Manufacturer SKU: TUN6780788 SKU: 6780788-Tungaloy Name: DNMG150604 T9225 Tungaloy indexable insert Material: Carbide Coating/grade: T9225 (CVD-coated) Facts Size: 15 Thickness: 6.35 mm Corner radius: 0.4 mm Relief angle: 0° Approach angle: 55° Double-sided insert Hole: Cylindrical, with hole Special features Rhombic plate shape ISO-indexable turning insert series Intended application: Turning (external and internal) Chipbreaker: Double-sided System components: insert, suitable external holder or boring bar, shim/clamping set and spare screws Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The DNMG150604 T9225 Tungaloy indexable insert (SKU 6780788-Tungaloy) is optimised for medium-to-heavy steel machining and performs well when changing engagement conditions demand higher toughness. How does the CVD coating benefit cutting performance? A CVD-coated T9225 grade combines surface hardness with a tough substrate for wear resistance and reduced flank wear; the Tungaloy turning insert delivers longer life and consistent finish in demanding steel applications. Is the insert reversible and how many cutting edges are available? This is a double-sided indexable insert; each side provides usable edges, allowing multiple indexing steps per insert which enhances overall edge economy for the Tungaloy turning insert DNMG150604 T9225. What holder features are required for correct fitting? Correct compatibility depends on the holder form, relief angle, tolerance class, clamping method, size and thickness; the DNMG150604 Tungaloy insert fits ISO-standard holders matching those parameters. Which chipbreaker is recommended for interrupted cuts? The integrated double-sided chipbreaker on this DNMG150604 Tungaloy insert assists chip control in interrupted and unstable cuts; pairing the insert with a suitably rigid holder improves performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, predictable chip control and ISO compatibility for steady production results; the insert supports medium to heavy steel turning with good resistance to interrupted cuts. Order the DNMG150604 T9225 turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150604 T9225 turning insert — CVD-coated carbide, 55° approach angle — Tungaloy DNMG150604 T9225 is a rhombic ISO turning insert engineered for medium to heavy steel turning, offering a robust universal grade and secure clamping for external and internal turning applications CVD-coated carbide for robust cutting ISO DNMG 150604 rhombic geometry Double-sided chipbreaker, economic cutting edges Cylindrical hole for positive clamping 0° relief and 55° approach angle Reliable cutting performance under changing conditions The CVD-coated carbide grade T9225 is formulated as a robust universal solution for medium to heavy steel turning where occasional interruptions or variable engagement demand higher toughness. The applied coating enhances wear resistance and supports longer tool life, which translates into fewer indexings and reduced tooling costs over a production shift. Explained simply: the coating is a thin, hard layer applied over the carbide substrate to protect the edge and keep cutting forces stable, which benefits cycle-time consistency and process reliability. Secure fit and geometry that supports versatility The ISO DNMG 150604 format and rhombic shape combine with a cylindrical hole and defined tolerances to ensure compatibility with a wide range of standard holders; compatibility depends on form, relief angle, tolerance class, attachment and thickness. With a 55° approach angle and 0° relief, the geometry promotes predictable cutting forces and a favourable tool path for outside and inside turning. The insert measures 15 mm across the inscribed circle and has a 6.35 mm thickness, with a 0.4 mm corner radius that balances edge strength and profile detail for turned features. Efficient chip control and economical edge usage A double-sided chipbreaker offers two active cutting faces before indexing, improving cost-efficiency for batch production. The chipbreaker design optimises fragmentation and evacuation during medium to heavy steel machining, reducing the risk of built-up edge and contributing to improved surface finish. For workshops seeking reliable output, the grade’s toughness and the insert’s construct reduce unplanned stoppages and support steady throughput; selecting the right chipbreaker and stable clamping is key to making the most of these benefits. For a tailored recommendation on integrating Tungaloy DNMG150604 T9225 inserts into existing turning setups, contact Metav Werkzeuge for technical advice and prompt supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780958 Manufacturer SKU: TUN6780958 Our SKU: 6780958-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150604 T9225 Tungaloy insert Core measurements Thickness: 6.35 mm Inscribed circle / size: 15 mm Corner radius: 0.4 mm Approach angle: 55° Relief angle: 0° Design & special features Material: carbide Coating: CVD-coated Shape: rhombic Hole: with hole, cylindrical hole Chipbreaker: double-sided Typical application: turning Grade use: medium to heavy steel machining, robust universal grade FAQ What steels can be machined with this insert? The Tungaloy DNMG150604 T9225 insert is specified for medium to heavy steel machining; the T9225 grade provides toughness for varying engagement and light interruptions in the cut. How is compatibility with a toolholder determined? Compatibility depends on the insert form, relief angle, tolerance class, attachment method, overall size and thickness; the ISO DNMG 150604 geometry matches standard DNMG holders with a cylindrical hole. How many cutting edges are available per insert? The double-sided chipbreaker design presents two usable cutting edges per side, allowing multiple indexings before replacement and improving cost-efficiency. What are the key dimensions to check when replacing inserts? Important measurable values are 15 mm inscribed circle, 6.35 mm thickness, 0.4 mm corner radius, 55° approach angle and 0° relief angle as listed for this insert. What does the CVD coating provide in practice? The CVD-coated layer on the carbide substrate increases wear resistance and edge life, stabilising performance in longer cuts and under intermittent loading typical of heavy turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade tuned for medium to heavy steel work, the ISO DNMG150604 form with a 55° geometry and a reliable double-sided chipbreaker for consistent chip control — order the DNMG150604 T9225 directly via Metav Werkzeuge or ask the consultants for application advice. DNMG150604 T9225 indexable turning insert, CVD-coated carbide, 55° — Tungaloy The DNMG150604 T9225 is an ISO-standard indexable insert for external and internal turning, engineered as a robust universal grade for medium to heavy steel machining. CVD-coated carbide for improved wear resistance Robust universal grade for medium to heavy steel ISO DNMG 150604 form with 55° cutting angle Double-sided chipbreaker with cylindrical hole Reliable performance for heavy steel turning The combination of a CVD-coated cutting surface and a T9225 carbide substrate provides enhanced wear resistance and toughness for variable engagement conditions typical in medium to heavy steel work. The insert’s 55° cutting geometry and 0° relief angle enable stable cutting in many setups, while the 0.4 mm corner radius balances edge strength and surface finish. As an ISO form, the geometry and tolerances support predictable behaviour when matched to a suitable holder and clamping system, improving process reliability without the need for exotic tool room changes. Controlled chips and longer productive life Chip formation is managed by the double-sided chipbreaker, designed for effective fragmentation in turning operations and for coping with slight interruptions in the cut. The insert’s cylindrical hole provides secure clamping and consistent seating, which reduces micro-movement that accelerates wear. Together, chip control and the CVD layer contribute to extended tool life and fewer index changes, lowering downtime and enhancing throughput in series production or mixed-batch machining. Practical compatibility and straightforward system integration The DNMG form ensures broad compatibility with external holders and boring bars when the form, relief angle, tolerance class, fastening, size and thickness are observed. Typical system components comprise the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws, facilitating quick reassembly. Selection of the correct chipbreaker and grade should follow the workpiece material and machine stability to maximise performance; the indexable insert concept delivers economical edge changes and predictable outcomes in everyday workshop practice. Secure Tungaloy performance with the DNMG150604 T9225 — contact Metav Werkzeuge for tailored technical advice and reliable supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6950970 SKU: 6950970-Tungaloy Manufacturer SKU: TUN6950970 Model series: ISO turning inserts Core specifications Insert designation: DNMG150604 Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Cutting angle: 55° Relief angle: 0° Double-sided insert Design and features Material: carbide, CVD-coated Grade: T9225, universal for medium–heavy steel Chipbreaker: double-sided Hole style: cylindrical hole Insert form: rhombic Typical applications: external and internal turning System components: holder or boring bar, shim/clamp set, replacement screws FAQ Which materials is this insert suitable for? The DNMG150604 T9225 is designed primarily for medium to heavy steel machining; the T9225 grade offers toughness for varying engagement and slightly interrupted cuts. How many usable edges does the insert provide? As a double-sided DNMG insert, the item supplies multiple usable edges before replacement is required, enabling economical indexing and reducing tool change frequency. What ensures secure clamping of the insert? The cylindrical hole and standard DNMG geometry provide reliable seating and clamping when paired with the corresponding holder and clamp set for consistent cutting performance. Is the grade suitable for unstable or interrupted cuts? Yes, the T9225 universal grade is formulated to tolerate changing engagement conditions and light interruptions, offering improved edge stability compared with finer grades. What system parts are needed to mount the insert? A compatible external holder or boring bar, appropriate shim or clamp set and replacement screws form the complete system for mounting the DNMG150604 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9225 Wendeplatten - Tungaloy
Benefit from the CVD‑coated carbide T9225 for reliable medium to heavy steel turning, combined with a rhombic DNMG150604 form and secure cylindrical fixing for stable engagement; order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. DNMG150604 T9225 Indexable turning insert, rhombic 55°, 0° relief — Tungaloy DNMG150604 T9225 is an ISO‑standard indexable insert for turning operations, optimised for robust chip control and interrupted cuts in steel machining. CVD-coated carbide T9225 Rhombic DNMG form, 55° geometry 0° relief angle for robust engagement Double-sided chipbreaker, cylindrical hole Consistent performance for medium to heavy steel turning The T9225 grade is a CVD‑coated carbide developed for universal use in demanding steel applications. Its composition and coating deliver a combination of toughness and wear resistance, making it suitable where variable cutting conditions and light interruptions occur. Choosing this cutting grade reduces the frequency of premature edge failure and supports longer productive runs in both external and internal turning operations. Clear fastening and geometry for secure cutting Supplied as an ISO‑standard rhombic insert, the geometry provides a 55° lead and a 0° relief angle, which together enable stable cutting engagement on shoulders and profiles. The insert includes a cylindrical hole for reliable clamping and a double‑sided chipbreaker to control swarf under varying feeds. Key dimensions such as 15 mm inscribed size, 6.35 mm thickness and 0.4 mm corner radius ensure predictable fitment and repeatable seating in compatible holders and boring bars. Productivity gains through optimised chip control and durability Using an insert with an engineered chipbreaker and CVD coating improves surface finish and process stability, reducing secondary operations and rework. The robust grade is designed for productive machining of steel, offering balanced tool life and economical performance. In practice, a correctly matched chipbreaker and holder pairing leads to reduced cycle times and fewer indexings, contributing to overall cost efficiency in batch and single‑part production. Practical guidance for system assembly and selection The insert forms part of a complete tooling system comprising insert, compatible outer holder or boring bar, backing shim/clamp set and replacement screws. Selection should consider holder form, clearance angle, tolerance class, fixing method, size and thickness to ensure full compatibility. Where interrupted cuts or unstable set‑ups occur, opting for this Tungaloy grade and a robust clamping arrangement enhances repeatability and reduces the risk of edge chipping. Contact Metav Werkzeuge for technical advice on Tungaloy turning solutions and to confirm the best DNMG150604 T9225 configuration for specific steel machining tasks — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6796037 SKU: 6796037-Tungaloy Manufacturer SKU: TUN6796037 Numbers / Core technical data Inscribed size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Relief angle: 0° Lead/angle: 55° Hole: with cylindrical hole Chipbreaker: double-sided Special features / Versions CVD-coated carbide material Grade: T9225 ISO indexable turning insert series Rhombic plate form (DNMG) Suitable for external and internal turning System: insert + holder + shim/clamp + replacement screws FAQ What materials is this insert suitable for? The DNMG150604 T9225 insert with T9225 CVD‑coated carbide is intended primarily for steel machining and performs well in medium to heavy turning tasks. How does the T9225 coating benefit machining? The CVD coating on the T9225 grade enhances wear resistance while maintaining toughness, which improves tool life and stability during interrupted cuts and variable engagement. Which holder characteristics ensure compatibility? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; the DNMG150604 form requires a holder designed for DNMG inserts with a 15 mm inscribed size and 6.35 mm thickness. Can the insert be indexed to use multiple edges? Yes, the plate is double‑sided and designed for indexation; rotating the insert provides a fresh cutting edge and extends the usable life before replacement. What advantage does the rhombic 55° geometry offer? The 55° rhombic form balances strength and approach angle for profile and shoulder work, offering a compromise between cutting edge durability and accessibility in confined features. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 T9225 Wendeplatten - Tungaloy
Benefit from a combination of robust CVD-coated carbide, a precise ISO rhombic geometry and a secure cylindrical clamping hole for reliable and repeatable turning performance; order the inserts directly via Metav Werkzeuge or consult our technical advisors for cutting data and batch supply. DNMG150604 T9225 — DNMG turning insert for medium to heavy steel machining by Tungaloy DNMG150604 T9225 is a CVD-coated carbide insert designed for ISO-compatible turning, offering a robust universal grade for variable cutting conditions and interrupted cuts CVD-coated carbide for robust cutting ISO rhombic DNMG geometry Cylindrical hole for secure clamping 0.4 mm corner radius for fine finishing Increased productivity and consistent tool life for steel turning The T9225 grade is a CVD-coated carbide developed to deliver stable performance in medium to heavy steel machining. Its composition balances toughness and wear resistance, which reduces unexpected insert breakage in lightly interrupted cuts and fluctuating cutting conditions. The result is longer periods between indexings and fewer unplanned tool changes, translating into higher effective spindle time and a more predictable production rhythm. This advantage is particularly relevant in batch production and mixed-series turning, where process stability directly affects throughput and cost-efficiency. Quick changeovers and assured seating for repeatable results Compatibility with ISO turning systems is ensured by the rhombic DNMG form, the specified clearance geometry and a cylindrical hole for positive clamping. The insert’s geometry—including a 55° included angle, a 0° clearance, and a precise 6.35 mm thickness—supports straightforward seating and repeatable positioning in suitable holders. Because holder compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness, selecting a correctly matched holder and clamping set avoids run-out and secures consistent cutting heights. The practical benefit is reduced setup time and reproducible part quality across shifts. Application guidance for surface finish and process reliability The double-sided chipbreaker and a 0.4 mm corner radius allow a balance between part finish and edge strength: the small radius helps achieve finer surface quality while the grade sustains edge integrity under tougher engagement. Typical uses include external and internal turning where medium to heavy cuts occur; the choice of chipbreaker and grade should match workpiece stability and the intended finishing requirement. For customers uncertain about the ideal chipbreaker or cutting parameters, Metav Werkzeuge provides tailored recommendations to align insert selection with machining strategy and desired surface quality. Contact Metav Werkzeuge to discuss cutting parameters, availability and secure supply of the Tungaloy DNMG150604 T9225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Item name: DNMG150604 T9225 Tungaloy insert Manufacturer article number: 6944691 Manufacturer SKU: TUN6944691 Merchant SKU: 6944691-Tungaloy Model series: ISO turning inserts Core specifications Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° Plate thickness: 6.35 mm Inscribed size: 15 mm Features & applications Shape: rhombic Hole: cylindrical (with hole) Chipbreaker: double-sided Coating and grade: CVD-coated carbide T9225 Application: external and internal turning; select chipbreaker and grade for material and stability FAQ What materials is this insert suited for? The DNMG150604 T9225 insert is a CVD-coated carbide grade intended primarily for medium to heavy steel machining and is suitable where occasional interruptions or varying engagement demand added toughness. How does the insert’s geometry affect setup? The rhombic DNMG form, 55° included angle and cylindrical hole ensure predictable seating in ISO-compatible holders; correct holder selection helps maintain cutting height and repeatable tool positioning. Is the corner radius suitable for fine finishing? With a 0.4 mm corner radius, the insert provides a good compromise between edge strength and surface finish, allowing finer finishes than larger radii while retaining robustness for heavier cuts. Can this insert be used on both internal and external turning operations? Yes; the DNMG150604 T9225 grade and rhombic geometry are suitable for both external and internal turning when paired with the appropriate holder and cutting parameters. What is the manufacturer SKU and article number for ordering? The insert is listed as SKU 6944691-Tungaloy with manufacturer article number 6944691 for ordering and stock reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9225 toughness, ISO compatibility and a secure clamping design for reliable medium to heavy turning operations; order the indexable insert directly via Metav Werkzeuge or consult our specialists for application support. DNMG 150604 T9225 indexable turning insert — Turning — Tungaloy DNMG 150604 T9225 is an ISO‑norm indexable insert designed for external and internal turning in medium to heavy steel machining, offering a balance of wear resistance and toughness for variable cutting conditions. CVD-coated carbide grade T9225 Robust universal grade for medium to heavy steel Rhombic DNMG with 55° cutting angle Double-sided chipbreaker, cylindrical hole High wear resistance and sustained cutting performance The CVD-coated carbide composition of this indexable insert provides a hard, wear‑resistant surface while the substrate maintains essential toughness for interrupted or unstable cuts. The T9225 grade is developed as a robust universal option for steel machining, enabling longer edge life under varying engagement conditions. This results in fewer insert changes and improved machine uptime, which translates directly into enhanced productivity on high‑mix turning lines. Geometry and clamping that reduce set‑up risk The rhombic DNMG geometry with a 55° approach angle and a 0° rake ensures versatile contact conditions for both external and internal turning. The insert is supplied with a cylindrical hole to enable secure clamping in standard holders; compatibility to the toolholder is determined by form, clearance angle, tolerance class, attachment method, size and thickness. Choosing the correct holder and clamp set from the ISO system guarantees repeatable positioning and consistent cutting performance. Chip control and surface quality under real conditions Equipped with a double‑sided chipbreaker, the insert promotes stable chip formation across a range of feeds and depths of cut. The specified corner radius of 0.4 mm supports robust edge strength while still enabling acceptable surface finish where medium to heavy material removal is required. For slightly interrupted cuts or mixed workpiece stability, this combination helps avoid premature flank wear and reduces the risk of edge chipping. System recommendations for reliable application This indexable insert is part of an ISO turning plate system and functions best when paired with a compatible outer holder or boring bar plus the correct support components (underlay/clamp set and replacement screws). The 6.35 mm plate thickness and the DNMG form make it suitable for standard clamping interfaces; the T9225 grade should be matched with the appropriate chipbreaker and machining parameters to optimise tool life and workpiece quality. For internal and external turning operations on steel, this insert provides a dependable balance of economy and performance. For robust and versatile steel turning applications consider the Tungaloy T9225 DNMG150604 insert — contact Metav Werkzeuge for availability and tailored machining advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6796077 Manufacturer SKU: TUN6796077 Model series: ISO turning indexable inserts Material: Carbide Grade: T9225 Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Cutting angle: 55° Free rake angle: 0° Special features Rhombic indexable insert DNMG150604 CVD-coated carbide Double-sided chipbreaker Cylindrical hole (with hole) ISO standard compatibility Application: Turning FAQ What materials is this insert suited for? The DNMG 150604 T9225 insert is intended primarily for steel machining; the T9225 grade is a robust universal option for medium to heavy steel turning. Can this insert handle interrupted cuts? Yes — the T9225 grade and the 0.4 mm corner radius provide the required toughness for slightly interrupted cuts and changing engagement conditions. Which holders are compatible with this insert? Compatibility depends on form, clearance angle, tolerance class, attachment, size and thickness; the insert seats in standard ISO DNMG holders with a cylindrical‑hole clamping system. How does the chipbreaker affect machining? The double‑sided chipbreaker improves chip control and promotes stable chip formation, which supports consistent surface quality and reduces tool wear. Is the insert reversible or indexable? This is a double‑sided, indexable insert suitable for re‑indexing to the opposite cutting edge, extending service life under appropriate operating conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9225 Wendeplatten - Tungaloy
Benefit from the robust CVD‑coated carbide T9225 and ISO‑standard DNMG format for dependable medium‑to‑heavy steel turning. Order the DNMG150604 T9225 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and cutting‑condition advice. DNMG150604 T9225 — Tungaloy turning insert for turning, rhombic 55° The DNMG150604 T9225 is an ISO‑standard rhombic turning insert designed for medium‑to‑heavy steel turning; it combines a CVD‑coated carbide body with a 0.4 mm corner radius and a 55° cutting geometry CVD‑coated carbide T9225 grade ISO‑standard DNMG 150604 form Rhombic insert, 55° cutting geometry Double‑sided with cylindrical locating hole Consistent metal removal under variable cutting conditions The CVD‑coated T9225 grade is engineered for a balance of toughness and wear resistance, making it suitable for interrupted cuts and fluctuating engagement. The CVD‑coated surface reduces flank wear while the substrate carbide maintains edge stability, so material removal rates remain consistent even when process conditions vary. For workshops aiming for reliable cycle times, this translates into fewer indexings and predictable tool change intervals, supporting continuous productivity. Secure clamping and simple tool matching for fast setup The insert's ISO rhombic form and the presence of a cylindrical locating hole ensure consistent seating and repeatable clamping in compatible holders. The combination of defined form, clearance angle and tolerance class allows easy selection of a matching seat or boring bar; correct matching reduces chatter and improves surface finish. The 55° geometry with a 0.4 mm corner radius offers a compromise between strength and profile detail, making the component appropriate for external and internal turning tasks where dimensional control matters. Practical performance for industrial steel machining As a universal grade for medium‑to‑heavy steel machining, this insert supports robust chip control thanks to its double‑sided chipbreaker and engineered rake geometry. The 6.35 mm plate thickness contributes to rigidity, while the indexable, two‑sided design provides economical use across multiple edges. Where operators require a mix of stable cutting and economical edge life, the insert brings operational consistency and simplified inventory management, as the ISO format integrates with standard toolholder systems. Contact Metav Werkzeuge today for application matching or to request genuine Tungaloy DNMG150604 T9225 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6944629 SKU: 6944629-Tungaloy Manufacturer SKU: TUN6944629 Model series: ISO‑Drehwendeschneidplatten Designation: DNMG150604 T9225 Tungaloy‑Wendeplatte Facts Corner radius: 0.4 mm Inscribed circle / size: 15 mm Thickness: 6.35 mm Cutting angle: 55° Clearance angle: 0° Special features Grade: T9225 Cutting material: CVD‑coated carbide Geometry: Rhombic DNMG format Hole style: cylindrical locating hole Chipbreaker: double‑sided Application: turning Compatibility: ISO insert; determined by form, clearance angle, tolerance, attachment, size, thickness FAQ What materials is this insert best suited for? The DNMG150604 T9225 insert is optimised for medium‑to‑heavy steel machining; the T9225 grade offers toughness for interrupted cuts and variable engagement. How should the insert be clamped in the holder? Ensure a matching ISO DNMG seat and correct screw or clamp arrangement; the cylindrical locating hole on the DNMG150604 provides positive location for repeatable clamping. How many usable edges are available on the insert? The insert is double‑sided with a reversible design, providing multiple indexing edges before replacement; this supports economical edge utilisation with the Tungaloy grade. Does the insert include a chipbreaker for improved control? Yes, the DNMG150604 is supplied with a double‑sided chipbreaker designed to support consistent swarf formation and evacuation during turning operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150604 T9225 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that combines wear resistance with the robust T9225 toughness for medium to heavy steel turning. The design and rhombic 55° geometry ensure repeatable chip control and reliable clamping, supporting a smooth production flow. Order the insert directly via Metav Werkzeuge or ask our consultants if further technical data is required. DNMG 150604 T9225 — Indexable turning insert with rhombic 55° geometry for turning (Tungaloy) DNMG 150604 T9225 is an ISO-standard indexable turning insert designed for general turning applications, especially medium to heavy steel machining, where toughness and reliable edge life are required CVD-coated carbide for wear resistance Robust universal grade for medium–heavy steel Rhombic 55° geometry with 0.4 mm nose radius Double-sided chipbreaker with central hole Greater process security from CVD-coated carbide The use of CVD-coated carbide in the T9225 grade delivers improved abrasion resistance while retaining toughness for variable cutting conditions. This balance reduces flank and crater wear, which means longer usable life per edge and fewer indexings in continuous production. For operations where tool change time directly affects output, the coating and substrate combination translates into measurable productivity gains and lower downtime. Predictable chip control and reproducible results The rhombic 55° geometry and double-sided chipbreaker produce controlled chip formation across varying depths of cut. The central cylindrical hole supports secure clamping in standard holders, helping to maintain repeatable tool position and surface finish. Where process stability is a priority, this geometry minimises vibration and assists in achieving consistent dimensional accuracy, improving overall part quality. Flexible compatibility within ISO turning systems As an ISO-standard indexable turning insert, compatibility is determined by shape, clearance angle, tolerance class, fastening and thickness. The DNMG 150604 format fits a broad range of external holders and boring bars when the correct seat and screw are used. This interchangeability allows integration into existing tool systems with minimal adaptation, supporting efficient tool inventory management. Suited for interrupted cuts and mixed conditions The T9225 sort is specified as a robust universal grade for medium to heavy steel machining, particularly where interrupted cuts or fluctuating engagement demand extra toughness. The 0.4 mm nose radius provides an effective compromise between edge strength and surface finish, making the insert suitable for both roughing and semi-finishing tasks without frequent tool swaps. For ordering or tailored application advice on the Tungaloy T9225 insert, contact Metav Werkzeuge for professional guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical Data Article number: 6780856 Manufacturer SKU: TUN6780856 SKU: 6780856-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150604 T9225 Tungaloy-Wendeplatte Facts Thickness: 6.35 mm Size (inscribed circle): 15 mm Included angle: 55° Nose radius: 0.4 mm Clearance angle: 0° Hole: with hole (cylindrical) Special features Material: cemented carbide Coating: CVD-coated (T9225) Shape: rhombic Chipbreaker: double-sided Application: turning ISO-standard indexable insert Central cylindrical hole for clamping FAQ Which materials is this insert suitable for? The Tungaloy DNMG 150604 T9225 insert is engineered primarily for medium to heavy steel machining and performs well under varying engagement and interrupted cuts. What does the T9225 designation indicate? T9225 denotes a CVD-coated carbide grade focused on robustness and reliable edge life for steel applications; it combines wear resistance with increased toughness. Is the insert compatible with standard DNMG holders? Compatibility requires matching the DNMG150604 seat form, thickness and fastening; when the holder conforms to ISO DNMG requirements, the insert can be used directly. Can this insert be used for finishing operations? With its 0.4 mm nose radius, the insert can be used for semi-finishing; for high-precision finishing, selection of an insert with a smaller radius and appropriate grade is recommended. How does the chipbreaker affect performance? The double-sided chipbreaker on the DNMG 150604 promotes controlled chips and helps maintain surface quality, particularly during varying depth of cut or mixed turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9225 Wendeplatten - Tungaloy
Benefit from the Tungaloy T9225 grade's toughness together with the rhombic DNMG geometry and CVD-coated carbide for steady chip control and extended tool life in medium-to-heavy steel turning. Order the insert directly via Metav Werkzeuge or ask our consultants if required. DNMG 150604 T9225 Turning insert by Tungaloy — CVD-coated carbide, 55° geometry The DNMG150604 T9225 Tungaloy insert is an ISO-standard indexable turning insert designed for medium-to-heavy steel machining where robustness and resistance to interrupted cuts are required. CVD-coated carbide grade T9225 Robust universal grade for steel machining Rhombic DNMG shape, 55° cutting angle Double-sided chipbreaker with cylindrical hole Consistent performance for medium-to-heavy steel turning The DNMG150604 indexable insert combines a CVD-coated surface with a T9225 cemented carbide substrate to provide enhanced toughness for demanding operations. The CVD coating increases wear resistance while preserving substrate ductility; this balance yields stable chip formation under varying engagement conditions and contributes directly to longer tool life. For production environments with occasional interruptions or changing depths of cut, the grade's increased toughness reduces the risk of edge chipping, which in turn supports predictable machining cycles and lower unplanned downtime. Clear compatibility and secure clamping save setup time Produced to ISO dimensions, the insert’s rhombic DNMG form and 55° cutting angle ensure broad compatibility with standard external holders and boring bars. The insert’s 0° clearance specification and the cylindrical hole facilitate reliable seating and repeatable positioning, so the correct holder and clamp assembly deliver consistent blade geometry at every tool change. Documentation for holder matching focuses on form, relief angle, tolerance class, fastening method, size and thickness — this clarity reduces setup iterations and improves first-pass accuracy on turned components. Productivity gains through proven chip control and grade selection A double-sided chipbreaker enables economical use of both cutting edges, doubling indexable life before regrinding or replacement and improving cost-efficiency per cutting edge. Selecting the T9225 universal grade for steel turning provides a pragmatic compromise between wear resistance and fracture toughness, which is particularly beneficial when machining interrupted cuts or mixed batch runs. The result is elevated productivity through fewer tool changes and consistent surface finish in serial turning operations, while the insert’s geometry helps maintain stable chip evacuation under moderate to heavy cutting conditions. For applications requiring reliable steel turning with enhanced toughness, request Tungaloy T9225 DNMG inserts from Metav Werkzeuge — Metav Werkzeuge can advise on matching holders and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6780957 Manufacturer SKU: TUN6780957 SKU: 6780957-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: DNMG150604 T9225 Tungaloy insert Core technical data Corner radius: 0.4 mm Plate thickness: 6.35 mm Inscribed circle / size: 15 mm Cutting angle: 55° Clearance angle: 0° Hole: cylindrical Special features CVD-coated cemented carbide Grade: T9225 Rhombic plate form (DNMG) Double-sided chipbreaker ISO-compatible turning insert Application: Turning With central cylindrical hole FAQ Which materials is this insert suitable for? The DNMG150604 T9225 insert is formulated as a robust universal grade primarily for steel machining, performing well in medium-to-heavy turning and when intermittent cuts demand increased toughness. Is the insert indexable on both sides? Yes, the insert features a double-sided chipbreaker that permits indexing both edges, extending the number of usable cutting edges before replacement. How is compatibility with holders determined? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; the DNMG geometry and ISO-standard sizing make matching to common external holders straightforward. Does the T9225 grade require special cutting conditions? No special ambient requirements are prescribed; cutting parameters should be selected based on workpiece material, machine rigidity and the chosen holder. The T9225 grade offers a balance of wear resistance and fracture toughness suited to variable engagement conditions. What is the significance of the 55° cutting angle? The 55° cutting angle of the rhombic DNMG form provides versatility for external and internal turning, combining good edge strength with flexibility in approach angles and depth-of-cut selection. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9235 and robust DNMG150604 geometry for reliable machining of steel under unstable or interrupted conditions; the double-sided, rhombic insert with a 0° clearance angle and 0.4 mm corner radius provides economical edge life and predictable performance. Order details and application advice are available through Metav Werkzeuge or consultation on specific holders and parameters can be requested. DNMG150604 T9235 turning insert — Tungaloy (ISO DNMG, CVD-coated carbide) DNMG150604 T9235 is an ISO-standard indexable insert for external and internal turning, designed to deliver stable cutting under difficult conditions ISO DNMG150604 form, rhombic 55° geometry CVD-coated carbide grade T9235 for steel 0° clearance angle, double-sided chipbreaker Cylindrical hole, 6.35 mm plate thickness Durable cutting performance for steels in challenging conditions The insert is built on a carbide substrate with a CVD coating in grade T9235, a composition selected for toughness rather than maximum hardness. This combination promotes reliable performance when machining steel, particularly at lower cutting speeds, in unstable set-ups or during interrupted cuts. A corner radius of 0.4 mm helps to distribute cutting forces and supports repeatable surface quality when alternating between light finishing passes and heavier engagements. The tougher substrate reduces the risk of chipping, which is beneficial where machine rigidity or workholding is limited. Geometry and clamping for consistent repeatability and economy The rhombic ISO DNMG150604 shape with a 55° included angle provides a versatile cutting edge suitable for both external and internal operations. The insert is double-sided, which means two usable cutting positions and therefore improved cost-efficiency per insert. A 0° clearance angle simplifies seat design in compatible holders, while the cylindrical hole ensures secure fastening and accurate location. The plate thickness of 6.35 mm contributes to edge strength and stability under higher radial loads, improving resistance to deformation in semi-finish and roughing tasks. Process benefits: chip control, uptime and predictable results The integrated double-sided chipbreaker assists in manageable chip formation and evacuation, reducing the risk of entanglement and supporting consistent surface finish. Because compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, careful pairing with the correct ISO-compatible holder preserves clamping integrity and repeatable positioning. The overall result is extended tool life, fewer tool changes and a steadier production flow, which translates into lower unplanned downtime and a more predictable machining process. Contact Metav Werkzeuge for tailored application advice and availability of DNMG150604 T9235 Tungaloy inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6785934 Manufacturer SKU: TUN6785934 Product label: DNMG150604 T9235 Tungaloy insert SKU: 6785934-Tungaloy Facts Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Special features CVD-coated carbide grade T9235 Double-sided chipbreaker Rhombic plate form, ISO DNMG Suitable for external and internal turning Cylindrical hole for positive locating and fastening Compatibility depends on holder form, clearance angle, tolerance class and fastening FAQ Which materials is this insert suited for? The DNMG150604 T9235 insert is designed primarily for steel machining; the T9235 grade offers toughness for applications with interrupted cuts and less rigid set-ups. Can this insert be used for both internal and external turning? Yes, the rhombic form and 55° geometry make the insert suitable for both external and internal turning operations. What advantage does the T9235 grade provide? The T9235 CVD-coated grade balances wear resistance with substrate toughness, improving resistance to chipping during interrupted cutting and in unstable conditions. Is the insert reversible and how many edges are usable? The insert is double-sided, providing two usable cutting edges per indexable position, which improves economy per insert. How is compatibility with a toolholder ensured? Compatibility is ensured by matching the insert form, clearance angle, tolerance class, fastening method, size and thickness to the holder; these parameters determine correct seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9235 Wendeplatten - Tungaloy
Take advantage of a tough CVD-coated carbide grade and a 55° rhombic geometry for dependable turning under unstable or interrupted conditions; order directly via Metav Werkzeuge or request advice from the Metav consultants. DNMG150604 T9235 Tungaloy indexable turning insert — CVD-coated carbide, 55° rhombic The DNMG150604 T9235 Tungaloy indexable insert is designed for general turning applications on steel where a tough grade and secure chip control are needed, compatible with ISO-style holders. CVD-coated carbide T9235 grade Tough grade for unstable or interrupted cuts Rhombic 55° geometry with 0° clearance Double-sided chipbreaker with cylindrical hole Precision and process reliability for turning operations The insert combines a CVD-coated surface with a carbide substrate to deliver improved wear resistance and stable cutting behaviour during turning of steel. The T9235 grade is formulated for toughness rather than maximum speed, which means the insert performs well in interrupted cuts and under less rigid clamping conditions. The 55° rhombic geometry offers a versatile included angle that balances cutting edge strength with access into confined diameters. For users unfamiliar with coatings: CVD coating provides a hard, wear-resistant layer applied at elevated temperatures, enhancing edge life while the carbide core supplies the necessary toughness. Mounting compatibility and practical handling Compatibility with toolholders depends on form, clearance angle, tolerance class, fastening method, size and thickness; the insert’s 0° clearance and standard ISO dimensions simplify selection for many common holders. The rhombic shape and cylindrical hole support secure locating and repeatable clamping, while the double-sided chipbreaker allows the insert to be indexed for continued use. When selecting a holder and clamping set, ensure the insert seat matches the ISO profile and the fastening screw suits a cylindrical-hole insert to maintain process stability. Application advantages and user benefits This grade is intended for turning steel at lower cutting speeds where robustness is prioritised. The combination of a tough carbide substrate and a CVD-coated surface reduces the risk of brittle chipping when machining unstable setups or interrupted cuts, translating into fewer tool changes and less unplanned downtime. The insert’s geometry contributes to controlled chip formation, which decreases manual intervention at the machine and aids a consistent surface finish without demanding highly rigid conditions. Selection advice and shop-floor integration Choose the DNMG150604 T9235 variant when threading between productivity and reliability is essential: the insert’s durability under adverse conditions favours shops that encounter mixed batches, varying clamping stiffness or frequent interruptions. Match the chipbreaker style to the workpiece material and the intended depth of cut; for unfamiliar combinations, consult Metav Werkzeuge’s tooling specialists for margin recommendations and holder pairing. Clear documentation of the holder type, seat form and clamping screw will accelerate correct matching and reduce trial-and-error at the machine. For reliable, tough cutting performance from Tungaloy, contact Metav Werkzeuge for procurement and technical guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 6786029-Tungaloy Manufacturer SKU: TUN6786029 Manufacturer article number: 6786029 Model series: ISO-Drehwendeschneidplatten Designation: DNMG150604 T9235 Material: carbide Coating: CVD Key figures Corner radius: 0.4 mm Plate thickness: 6.35 mm Inscribed circle / size: 15 mm Included angle: 55° Clearance angle: 0° Hole: cylindrical Special features Grade T9235 — tough, for steel at lower cutting speeds Double-sided chipbreaker for improved chip control Rhombic plate form suitable for internal and external turning ISO-standard indexable insert compatible with matching holders Designed for interrupted cuts and unstable machining conditions FAQ What materials is this insert intended for? The DNMG150604 T9235 insert is designed primarily for turning steel, with the T9235 grade offering toughness suited to lower cutting speeds and interrupted machining. How does the CVD coating benefit tool life? A CVD-coated carbide insert combines a hard, wear-resistant surface with a tough carbide core, improving wear resistance while retaining edge strength, which extends life especially in variable conditions. Is the insert reversible and how many usable edges are available? The insert is double-sided with a rhombic form, allowing indexing to use the alternate edges; the double-sided chipbreaker supports multiple orientations for efficient edge utilisation. Which holder characteristics must be checked for compatibility? Compatibility is determined by the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; ensure the holder accepts ISO DNMG geometry and a cylindrical-hole insert. Can this insert handle interrupted cuts? Yes, the T9235 grade and carbide substrate are selected for toughness, making the insert appropriate for interrupted cuts and less rigid setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 T9235 Wendeplatten - Tungaloy
Take advantage of a combination of robust edge life, ISO compatibility and reliable performance in unstable or interrupted turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for selection assistance. DNMG 150604 T9235 Tungaloy insert for turning — CVD-coated carbide, 55° rhombic geometry DNMG150604 T9235 Tungaloy insert is an ISO-standard rhombic turning insert designed for external and internal turning, offering a tough CVD-coated carbide grade for lower cutting speeds and interrupted or unstable cuts. ISO turning insert DNMG150604 CVD-coated carbide grade T9235 55° rhombic geometry, 0° relief 0.4 mm corner radius, double-sided chipbreaker Consistent performance under unstable cutting conditions The DNMG150604 T9235 indexable insert has been developed for demanding turning tasks where stability is limited and interruptions occur. The CVD-coated surface on the carbide substrate gives a wear-resistant cutting edge that performs reliably at lower cutting speeds, which helps to preserve edge integrity during fluctuating loads. This results in fewer unexpected tool changes and more predictable machining cycles, supporting efficient shop-floor planning and reduced downtime. Predictable chip control and extended edge life The rhombic 55° geometry combined with a double-sided chipbreaker ensures improved chip formation and evacuation, reducing the risk of built-up edge and chatter in unstable conditions. The T9235 grade is tuned for steel machining and provides a balance between toughness and wear resistance; this makes the insert suitable for interrupted turning and operations where a stable cutting edge is critical. The outcome is consistent surface finish and longer service intervals for the tooling system. Practical dimensions and handling for quick integration With a nominal insert size of 15 mm, a thickness of 6.35 mm and a 0.4 mm corner radius, the insert integrates seamlessly with standard ISO holders that match form, relief angle, tolerance class and fastening. The 0° clearance angle and the rhombic profile simplify seat alignment and clamping, while the central cylindrical hole secures repeatable positioning. These features reduce setup time and make replacement straightforward while maintaining reference accuracy in serial production. Application fit and selection advice Designed primarily for turning of steel under less-than-ideal stability, the insert excels in external and internal operations where interrupted cuts are frequent. Selecting the correct chipbreaker and holder combination is essential: the insert’s form, corner radius and grade determine the best feed and speed window. For process optimisation and tailored recommendations, Metav Werkzeuge can advise on holder compatibility and cutting parameters to match the required material and machining conditions. For procurement or technical advice on Tungaloy CVD-coated turning inserts, contact Metav Werkzeuge for personalised selection and delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6785933 Manufacturer SKU: TUN6785933 SKU: 6785933-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150604 Grade: T9235 Material: carbide Facts Insert size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Relief angle: 0° Approach angle: 55° Special features CVD-coated carbide grade T9235 Double-sided chipbreaker Rhombic plate form Central cylindrical hole for secure clamping Suitable for external and internal turning Intended for interrupted cuts and unstable conditions FAQ What materials is this insert intended for? The T9235 grade of this DNMG150604 insert is formulated primarily for machining steel and performs well under unstable cutting conditions and interrupted cuts. Can the insert be used for both external and internal turning? Yes, the rhombic shape and standard ISO form make the insert suitable for both external and internal turning when combined with the appropriate ISO-compatible holder. Is the insert reversible and how many cutting edges are available? The insert is double-sided with a chipbreaker on each side, offering two usable cutting edges per indexable insert for economical usage. Which holders are compatible with this insert? Compatibility is determined by the insert form, relief angle, tolerance class, fastening style, size and thickness; holders designed for ISO DNMG150604 inserts will be suitable. What advantages does the T9235 grade provide? The T9235 CVD-coated carbide offers enhanced toughness for lower cutting speeds and unstable machining, helping to maintain a stable cutting edge and reliable performance in interrupted operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150604 TH10 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, uncoated carbide cutting edge and an ISO‑compliant rhombic geometry for controlled low cutting forces and clean surfaces; use the 55° cutting angle and double‑sided design for versatile external and internal turning. Order the DNMG150604 TH10 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150604 TH10 indexable turning insert — Tungaloy (for turning) DNMG150604 TH10 is an ISO‑compliant rhombic indexable insert for precision external and internal turning of non‑ferrous materials and similar applications ISO rhombic insert, 55° cutting angle Sharp uncoated carbide for non‑ferrous metals Double‑sided geometry with 0° relief angle Cylindrical hole for secure clamping Optimised cutting performance with a sharp uncoated grade The TH10 grade is an uncoated carbide chosen for applications where a sharp edge reduces cutting forces and produces a cleaner surface on non‑ferrous materials. The rhombic 55° geometry offers a balanced engagement that keeps cutting loads moderate while enabling stable chip formation. For light to medium cuts, this combination supports reliable chip control and predictable surface finish, making the insert suitable for both roughing passes where low cutting forces are needed and finishing operations that demand improved appearance. Secure mounting and ISO compatibility for repeatable results The insert features a cylindrical hole and standardised dimensions that match ISO‑type turning holders when form, free angle, tolerance class, fixation, size and thickness align. The 0° relief angle and the rhombic shape ensure stable seating in the pocket; the double‑sided design increases usable edges and helps maintain productivity. When the holder and clamp set are selected in accordance with ISO specifications, tool changeover is straightforward and repeatable, reducing machine downtime and setup uncertainty. Practical guidance on grade and chipbreaker selection With a double‑sided chipbreaker and the sharp TH10 grade, this insert is aimed primarily at non‑ferrous materials and applications where minimal cutting forces are critical. Select the chipbreaker and grade combination to match material, depth of cut and machine rigidity: TH10 supports clean shearing on softer alloys and promotes long tool life where an uncoated edge is favourable. For mixed‑material production, pairing the insert with a holder that offers good clamping stiffness will enhance edge stability and surface consistency. Operational benefits and application scenarios Using this ISO‑type insert reduces the need for complex coatings in applications that rely on mechanical edge sharpness rather than thermal protection. The compact 15 mm inscribed size, 6.35 mm thickness and 0.4 mm corner radius are well suited to light to medium turning duties on brass, aluminium and similar alloys. Process planners will value the predictable behaviour of the uncoated carbide in operations where tool‑induced heat and built‑up edge must be minimised, while workshop supervisors will appreciate the simplicity of an ISO‑standard geometry that fits a wide range of established holders. Contact Metav Werkzeuge for tailored application advice on the DNMG150604 TH10 insert: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6803527 Manufacturer SKU: TUN6803527 SKU: 6803527-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: DNMG150604 TH10 Tungaloy‑Wendeplatte Facts ISO code: 150604 Cutting angle: 55° Thickness: 6.35 mm Inscribed size: 15 mm Corner radius: 0.4 mm Relief angle: 0° Hole: with cylindrical hole Special features Material: carbide (uncoated) Shape: rhombic Chipbreaker: double‑sided Intended use: turning (external and internal) Compatibility: ISO turning holders (form, free angle, tolerance) Grade: TH10 FAQ What materials is this insert best suited for? The DNMG150604 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass; the uncoated carbide grade supports low cutting forces and clean surface generation. Is the insert compatible with standard ISO turning holders? Yes. The DNMG150604 geometry and dimensions are ISO‑compliant; compatibility depends on matching holder form, free angle, tolerance class, fixation and thickness. Does the insert have a coating? No. The TH10 grade is an uncoated carbide selected for sharp‑edge performance rather than coated thermal protection. What is the corner radius and how does it affect machining? The corner radius is 0.4 mm; this provides a balance between strength and surface finish, suitable for light to medium turning where a modest radius helps resist edge chipping while maintaining good finish. How is the insert secured in the holder? The plate uses a cylindrical hole for positive clamping; when combined with an appropriate clamp set and screw, the seating is stable and repeatable. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150608 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of durable PVD-coated carbide, sharp cutting geometry and easy system compatibility to keep turning cycles predictable and productive; order the insert directly via Metav Werkzeuge or consult our advisors for holder compatibility and batch requirements. DNMG150608 AH120 Tungaloy turning insert — PVD-coated carbide, 0° clearance The DNMG150608 AH120 is an ISO-format turning insert engineered for medium-to-fine turning where a sharp cutting edge and reliable process security are required. DNMG 150608 AH120 grade PVD-coated carbide for edge retention Double-sided chipbreaker for stability Rhombic shape with cylindrical hole Stable cutting performance and longer edge life The combination of a PVD-coated surface and cemented carbide substrate delivers a reliable balance between wear resistance and toughness. The AH120 grade is formulated for situations where a sharp cutting edge is needed without sacrificing tool life; the coating reduces flank wear and helps maintain dimensional consistency over longer cycles. For production-focused turning operations, this results in fewer insert changes and more predictable process windows, which supports throughput and reduces unplanned downtime. Geometry designed for precise, repeatable results The rhombic plate form with a cylindrical hole and central fixing method ensures secure seating and repeatable orientation in standard ISO holders. The insert’s 0° clearance and 55° approach angle create a defined cutting engagement that reduces chatter on stable set-ups while the 0.8 mm radius provides a controlled edge form for strength and surface finish. At 6.35 mm thickness the insert offers rigidity that aids chip control under varying depths of cut, making tool setups more forgiving and consistent across batch runs. Versatile chip control for consistent machining A double-sided chipbreaker on this indexable insert helps shape and evacuate chips efficiently, lowering the risk of built-up edge and improving surface quality. The chipbreaker geometry is chosen to match operations where maintaining a sharp edge and process security are priorities; the result is smoother finishing passes and less manual intervention. Compatibility with ISO-standard turning holders means the insert can be integrated into existing tool systems with minimal adjustment. System-level benefits and economical use The insert is part of an ISO insert system that includes the insert itself, a matching external holder or boring bar, and clamping accessories; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. This modular approach allows straightforward stocking strategies and reduces complexity in tool dispensing. The combination of good edge life, stable chip control and simple replacement cycles contributes to a favourable cost-per-part metric and supports reliable series production. For technical samples, holder compatibility checks or to request a quotation for the DNMG150608 AH120 Tungaloy turning insert, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with application matching and supply options. Technical data Article number: 6814055 SKU: 6814055-Tungaloy Manufacturer item no.: 6814055 Model series: ISO turning indexable inserts Numbers ISO code: 150608 Corner radius: 0.8 mm Insert thickness: 6.35 mm Inscribed circle / size: 15 mm Clearance angle: 0° Lead/approach angle: 55° Special features Material: carbide (cemented carbide) Coating: PVD-coated Grade: AH120 Shape: rhombic Hole: with hole, cylindrical hole Chipbreaker: double-sided Typical application: turning; compatibility with ISO holders determined by form and dimensions FAQ What materials is this insert intended for? The DNMG150608 AH120 Tungaloy turning insert is specified for turning operations where a sharp cutting edge and process security are needed; select the chipbreaker and cutting data to match the workpiece material and machining conditions. How does the AH120 grade improve production stability? AH120 is a PVD-coated carbide grade designed to resist flank wear and minimise edge chipping, improving repeatability and reducing the frequency of insert changes in continuous machining. Is the insert compatible with standard ISO turning holders? Yes, the ISO-format design of the DNMG150608 ensures compatibility with standard holders; correct matching requires attention to form, clearance angle, tolerance class, fastening and insert thickness. How is chip control achieved with this insert? The double-sided chipbreaker integrated into the insert geometry helps form and evacuate chips efficiently, which supports consistent surface finish and reduces the likelihood of built-up edge. Can the insert be used for both roughing and finishing passes? The geometry and 0.8 mm radius make the insert suitable for a range of turning operations; however, optimal performance depends on selecting appropriate cutting parameters and the correct chipbreaker for the task. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH120 Wendeplatten - Tungaloy
Take advantage of a PVD-coated cemented carbide grade that combines a sharp cutting edge with high process security and long tool life; the insert’s 55° rhombic geometry and 0.8 mm corner radius enable versatile external and internal turning. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG150608 AH120 — DNMG150608 AH120 turning insert for turning applications, Tungaloy The DNMG150608 AH120 is a PVD-coated cemented carbide ISO turning insert designed for general external and internal turning where a sharp cutting edge and process reliability are required ISO rhombic insert, 55° cutting geometry PVD-coated cemented carbide AH120 0° rake angle, 0.8 mm corner radius Cylindrical hole for secure clamping Engineered for consistent set-up and holder compatibility The insert is built to ISO conventions so set-up is straightforward and repeatable. With a rhombic plate form and 55° geometry, compatibility with toolholders is determined by shape, clearance angle, tolerance class, fastening and plate size; this reduces fixture time and improves repeatability at the machine. The 6.35 mm thickness and cylindrical hole support secure clamping and stable machining, while adherence to ISO dimensions simplifies stock management and holder selection for production environments. Durable cutting performance with low wear and secure edges The PVD-coated cemented carbide AH120 grade provides a balance of wear resistance and chipping protection suited to demanding turning operations. The combination of a sharp cutting edge and double-sided chipbreaker helps maintain surface quality and reduces the frequency of insert changes. A 0° rake angle and 0.8 mm corner radius deliver consistent chip formation and predictable tool behaviour, which together contribute to longer tool life and a more economical production flow. Practical application guidance and selection advantages Intended for both external and internal turning, the insert's design supports a wide range of machining tasks when the correct chipbreaker and grade are chosen for workpiece stability and machining style. Selecting the AH120 grade emphasises process security and reproducible results; for best performance, match the chipbreaker specification to the workpiece rigidity and feed strategy. The result is fewer production interruptions and a steadier surface finish across batches. For reliable, high-productivity turning choose the Tungaloy DNMG150608 AH120 — contact Metav Werkzeuge for tailored machining advice and application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6814057 Manufacturer SKU: TUN6814057 SKU: 6814057-Tungaloy Model designation: DNMG150608 AH120 Brand: Tungaloy Series: ISO turning inserts Facts Plate size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Cutting geometry angle: 55° Rake angle: 0° Hole style: cylindrical Chipbreaker: double-sided Special features PVD-coated cemented carbide (AH120) Rhombic plate form Two-sided, indexable insert Compatible with ISO-standard turning holders when matched by form and tolerance Designed for external and internal turning applications FAQ What is the primary application for this insert? The DNMG150608 AH120 insert is designed for turning operations, suitable for both external and internal turning where a sharp cutting edge and process security are required. Is the insert reversible and how many cutting edges are available? This is a two-sided, indexable insert; each side provides usable cutting edges to extend service life and reduce replacement frequency. Which holders are compatible with this insert? Compatibility is achieved with ISO turning holders that match the insert’s rhombic form, 55° geometry, thickness and fastening style; correct matching ensures secure clamping and repeatable set-up. What are the dimensional key values to check before ordering? Key dimensions: 15 mm plate size, 6.35 mm thickness, 0.8 mm corner radius, 55° geometry and a cylindrical hole for fastening. What coating and grade are used and what benefits do they bring? The insert uses a PVD coating on a cemented carbide (AH120) grade, offering improved wear resistance, reduced chipping risk and enhanced process security for turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade (AH120) and a compact 55° rhombic geometry for reliable turning performance and stable edge retention; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and delivery options. DNMG 150608 AH120 — ISO turning insert for external and internal turning, Tungaloy The DNMG150608 AH120 is an ISO-standard rhombic turning insert designed for process-stable machining where a sharp cutting edge and consistent wear resistance are required. ISO rhombic 55° geometry PVD-coated carbide grade AH120 0.8 mm nose radius for precision Double-sided chipbreaker with hole Durable coating and grade for consistent productivity The combination of a PVD-coated carbide substrate and the AH120 grade provides improved wear resistance and predictable tool life in turning operations. This coating stabilises the cutting edge at elevated temperatures and reduces adhesive wear, so the insert maintains dimensional accuracy over longer cycles. The result is enhanced process security, fewer tool changes and a more continuous production flow. Geometry and dimensions that aid precision turning A 55° rhombic geometry with a 0.8 mm nose radius supports precise contouring and finishing passes while the 6.35 mm thickness contributes to mechanical rigidity during cuts. The insert features a cylindrical hole for secure clamping and is manufactured to ISO dimensions, which simplifies selection of a compatible external holder or boring bar. Compatibility is determined by form, relief angle, tolerance class, fastening type, size and thickness to ensure correct seating and repeatability. Shopfloor advantages: chip control and economy Equipped with a double-sided chipbreaker, the insert offers improved chip control across a range of feed rates and material removal conditions. Being reversible reduces tooling costs per cutting edge and supports rapid index changes during setup. For both roughing and finishing in turning applications, the design encourages stable cutting conditions, reduced downtime and better surface quality, making it an economical choice for batch and continuous production. Straightforward integration into existing tool systems The insert is delivered as part of a system consisting of an ISO turning insert, a suitable outer holder or boring bar, a shim/clamp set and replacement screws. The holder selection should match the insert's geometry and tolerance class to exploit the insert’s process reliability. When the correct chipbreaker and grade are selected relative to workpiece material and machining stability, consistent results and extended edge life can be achieved. For personalised advice on integrating the Tungaloy DNMG150608 AH120 insert into current turning setups or to discuss delivery and holder options, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance. Technical Data Article number: 6814049 SKU: 6814049-Tungaloy Manufacturer item number: TUN6814049 Model series: ISO turning inserts Manufacturer: Tungaloy Core specifications Insert size: 15 mm Thickness: 6.35 mm Nose radius: 0.8 mm Relief angle: 0° Lead angle: 55° Hole: cylindrical hole Special features Material: carbide Coating: PVD-coated Grade: AH120 Geometry: rhombic Chipbreaker: double-sided Application: turning System components: insert, outer holder/boring bar, shim/clamp set, screws Compatibility: determined by form, relief angle, tolerance, fastening, size and thickness FAQ What materials is this insert intended for? The AH120 grade is a wear- and fracture-resistant PVD-coated carbide designed for turning where a sharp cutting edge and process security are required; selection of chipbreaker and parameters should follow the workpiece material and machining strategy. How is compatibility with a holder determined? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; confirm the holder matches these parameters before fitting the DNMG150608 AH120 insert. Is the insert reversible? Yes, the insert is double-sided with a central cylindrical hole, allowing indexing to a fresh cutting edge which increases usable life per insert. What benefit does the PVD coating provide? The PVD coating increases surface hardness, reduces adhesive wear and helps maintain a sharp cutting edge, contributing to longer tool life and more consistent surface finish. Which chipbreaker should be used for best results? Choose the chipbreaker that matches the workpiece material, cutting conditions and machine stability; the DNMG150608 AH120 is supplied with a double-sided chipbreaker suitable for a broad range of turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH120 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH120 for consistent wear resistance and the ISO-standard DNMG150608 geometry for straightforward toolholder compatibility, ensuring stable, productive turning operations; order directly via Metav Werkzeuge or consult the team for process-specific advice. DNMG150608 AH120 rhombic turning insert, PVD-coated carbide — Tungaloy The DNMG150608 AH120 is an ISO-standard rhombic turning insert designed for external and internal turning, supplied with a cylindrical hole and a 0° relief angle for secure, repeatable clamping. PVD-coated carbide AH120 for wear resistance Rhombic DNMG 15×06 geometry, 55° cutting angle Double-sided chipbreaker, versatile turning tasks Cylindrical hole for secure mounting, ISO compatible Productive cutting with high wear resistance The DNMG150608 AH120 insert combines a PVD-coated carbide substrate with a wear- and chip-breakage-resistant grade to deliver consistent edge life under interrupted and continuous cuts. The 55° rhombic geometry supports both external and internal turning, enabling a balance between cutting force and accessibility. For production environments where predictability is essential, the hardened coating and stable substrate reduce downtime due to tool changes and help maintain part tolerances over longer runs. This results in fewer stoppages and a steadier output rate for routine turning tasks. Secure mounting and dimensional clarity for process stability Compatibility with a toolholder is determined by form, relief angle, tolerance class, fastening and the insert’s size and thickness; the rhombic plate features a cylindrical hole for positive locating and a 0° relief angle that suits many ISO-standard external holders. The insert’s 6.35 mm thickness and 15 mm inscribed circle provide mechanical stiffness in the clamping seat, while the 0.8 mm corner radius supports edge robustness without sacrificing finish. Clear dimensions and standard interfaces simplify tool selection and reduce setup time, improving throughput and reproducibility on the shop floor. Match chipbreaker and grade to the workpiece for best results Selecting the double-sided chipbreaker and the AH120 grade allows adaptation to material and cutting conditions: choose the chip control and feed rates that complement the workpiece to keep chips compact and evacuation reliable. The AH120 composition is aimed at a combination of sharp cutting edge and process reliability, making it suitable when a controlled finish and repeatable performance are priorities. For operators less familiar with insert grades, pairing the insert with stable clamping and checked cutting parameters yields measurable gains in surface quality and tool life. For secure and productive turning with Tungaloy’s AH120 grade, contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer item number: 6814060 SKU: 6814060-Tungaloy Model series: ISO turning inserts Designation: DNMG150608 Grade: AH120 Material: Carbide Dimensions / Core data Corner radius: 0.8 mm Inscribed circle: 15 mm Plate thickness: 6.35 mm Cutting angle: 55° Relief (free) angle: 0° Hole: with cylindrical hole Features / Application Rhombic plate form Double-sided chipbreaker PVD-coated grade for wear resistance Suitable for external and internal turning ISO-standard insert; compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The DNMG150608 AH120 is a PVD-coated carbide insert designed for general turning tasks; the AH120 grade provides good wear and breakage resistance suitable for a broad range of steels and finishing operations. How is the insert secured in the holder? This insert has a cylindrical hole and a standard rhombic form, enabling secure clamping in compatible ISO holders when the holder matches the insert’s form, thickness and fastening method. What does the AH120 designation mean for tool life? AH120 denotes a PVD-coated carbide grade optimised for wear resistance and edge stability, which typically extends effective cutting life in stable cutting conditions. Can the DNMG150608 be used for internal turning? Yes, the rhombic geometry and compact inscribed circle make the insert suitable for many internal turning applications as well as external operations. Is the corner radius fixed and what does it affect? The corner radius of 0.8 mm is fixed for this variant; it balances edge strength and surface finish, influencing achievable feed rates and part quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that balances a sharp, stable cutting edge with broad applicability for medium turning tasks; the plate’s rhombic 55° geometry and double-sided chipbreaker offer reliable chip control and flexibility in external and internal turning. Order genuine Tungaloy inserts through Metav Werkzeuge or consult our technical team for application-specific advice. DNMG 150608 AH6225 indexable turning insert by Tungaloy — PVD-coated carbide, 55° geometry The DNMG150608 AH6225 is an ISO-format indexable turning insert designed for medium turning operations and suited to work on rostfreier Stahl. PVD-coated carbide for enhanced wear resistance Universal grade optimised for rostfreier Stahl Rhombic 55° geometry for flexible turning operations Double-sided chipbreaker with cylindrical mounting hole Enhanced tool life and consistent machining performance The combination of a PVD-coated carbide substrate and the AH6225 grade delivers a sharp yet durable cutting edge engineered for medium cutting conditions. The coating reduces abrasive wear and increases resistance to built-up edge, which translates into fewer insert changes and more predictable process times. For production environments where cycle stability and repeatable surface quality matter, this configuration supports efficient machining sequences and reduced downtime while maintaining consistent dimensional results. Clear guidance on compatibility and secure clamping Compatibility with clamping systems follows ISO conventions and is determined by the insert’s form, clearance angle, tolerance class, fastening type, size and thickness. The rhombic shape with a 55° lead angle and 0° clearance affects approach geometry and cutting force direction; the cylindrical hole permits positive, repeatable seating in matched holders. When selecting a holder, match the plate form and thickness (6.35 mm) precisely to ensure stable fixation and correct cutting geometry, which preserves edge life and surface finish. Practical applications and chip control advantages Intended for both external and internal turning, this insert with a double-sided chipbreaker supports reliable chip formation across varying cut depths and feed rates. The grade’s design emphasises stable chip formation when machining rostfreier Stahl, providing good surface integrity without aggressive edge wear. Where machining stability can vary—short overhangs or intermittent cutting—this insert’s balanced edge stability and chip control reduce the likelihood of chatter and tool-related rejects, aiding overall process efficiency. Contact Metav Werkzeuge for tailored application advice and to obtain genuine Tungaloy DNMG150608 AH6225 inserts via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Manufacturer article number: 6947195 SKU: 6947195-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150608 Grade: AH6225 Manufacturer: Tungaloy Core dimensions Insert size: 15 Thickness: 6.35 mm Corner radius: 0.8 mm Lead angle: 55° Clearance angle: 0° Hole: with cylindrical hole Features / material Material: carbide Coating / sort: PVD-coated AH6225 Shape: rhombic Chipbreaker: double-sided Application: turning FAQ Is this insert suitable for external turning of rostfreier Stahl? The DNMG150608 AH6225 insert from Tungaloy is specified as a universal grade for rostfreier Stahl and is optimised for external turning in medium machining conditions. Will the plate fit existing ISO-compatible holders? Compatibility depends on holder geometry and specification; match form, thickness (6.35 mm), tolerance class, fastening method and hole style to ensure the DNMG150608 seats correctly. How does the chipbreaker influence machining? The double-sided chipbreaker provides consistent chip control across a range of feeds and depths, improving surface finish and reducing the risk of long, entangling chips during turning. Can this insert be indexed to use multiple cutting edges? Yes, the rhombic shape and double-sided design permit indexing to present fresh cutting edges, which extends productive life per insert. What are the main benefits of the AH6225 grade and PVD coating? The AH6225 grade offers a balance between a sharp cutting action and edge stability; the PVD-coated surface increases wear resistance and helps maintain consistent cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com