DNMG 150608 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet edge, 0.8 mm corner radius and ISO compatibility for consistent finishing results in turning; order directly via Metav Werkzeuge or consult our specialists for application support. DNMG150608 NS9530 Tungaloy insert for turning — uncoated cermet, 0.8 mm radius DNMG150608 NS9530 is a rhomboid ISO turning insert designed for finishing operations on steel, offering a sharp cutting edge and compatibility with standard ISO holders. ISO rhomboid insert DNMG150608 Uncoated cermet grade NS9530 for finishing 0.8 mm corner radius for fine surface finish Cylindrical hole for secure clamping High‑quality finishing with low cutting forces The uncoated cermet grade NS9530 is formulated for finishing cuts on steel, delivering a sharp cutting edge and reduced cutting forces. As a finishing grade, it excels in continuous cutting and small depths of cut, producing a superior surface finish without the need for a coating. Cermet substrates combine ceramic hardness with metallic toughness; this means improved wear resistance during fine turning and more consistent part quality. Choosing this grade supports repeatable results in serial production where dimensional and cosmetic quality matter. Secure fit and consistent repeatability in ISO systems Designed as an ISO‑standard insert, the rhomboid geometry and the cylindrical hole ensure reliable seating and clamping in matching holders. Compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG150608 format aligns with common external and internal turning holders. This standardisation reduces setup times and increases machine uptime by simplifying insert changes. The result is dependable repeatability and predictable process behaviour across different machines and operators. Practical machining guidance and performance advantages The 0.8 mm corner radius and a lead angle of 55° support delicate engagement with the workpiece, limiting vibration and improving surface integrity during finishing passes. The insert features a double‑sided chipbreaker and a sharp edge suited to light feeds and small depths of cut, which helps avoid built‑up edge formation on steel. As an uncoated cermet, it is particularly effective where a pristine part surface is the priority; the substrate’s properties permit stable chip formation and controlled cutting forces, which together reduce the need for rework. Application fit, economy and handling considerations As part of an ISO turning insert system, this plate integrates within a toolset comprising a matched external holder or boring bar, clamping shim and securing screw. The combination of a finishing cermet grade with ISO compatibility supports cost‑effective machining by lowering reject rates and minimising finishing passes. For workshops focusing on turned components with tight surface and dimensional requirements, this insert provides a reliable balance between surface quality and process stability while keeping inventory simple through standardised insert formats. For application advice, carbide holder selection or to order the Tungaloy DNMG150608 NS9530 insert directly, contact Metav Werkzeuge — our team is available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to assist with selection and delivery. Technical Data Article number: 6998154 Manufacturer SKU: TUN6998154 Designation: DNMG150608 NS9530 Tungaloy insert Facts Corner radius: 0.8 mm Insert size: 15 mm Plate thickness: 6.35 mm Lead angle: 55° Free angle: 0° Hole: cylindrical Special features Grade: NS9530 Substrate: uncoated cermet Shape: rhomboid (DNMG) Chipbreaker: double‑sided Application: Turning Model series: ISO turning inserts FAQ What materials is this insert intended for? The DNMG150608 NS9530 insert is a finishing grade optimised for steel, offering a sharp edge and stable chip formation suitable for continuous cuts and small depths of cut. Is the insert compatible with standard ISO holders? Yes. The DNMG150608 follows ISO dimensions and uses a cylindrical hole for clamping, ensuring compatibility with corresponding external holders and boring bars when form, clearance and fastening match. How does the uncoated cermet grade affect surface finish? Uncoated cermet NS9530 provides a very sharp cutting edge and low cutting forces, which promotes a high‑quality surface finish in finishing operations without the need for a coating. What benefits does the 0.8 mm corner radius provide? The 0.8 mm corner radius reduces vibration and edge stress during finishing passes, improving surface integrity and offering controlled engagement for fine feeds. Can this insert be used for internal turning as well as external turning? Yes. The ISO rhomboid format and double‑sided chipbreaker make the insert suitable for both external and internal turning when matched with an appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 NS9530 Wendeplatten - Tungaloy
Benefit from a combination of precise finishing performance, low cutting forces and reliable mounting: the cermet grade ensures superior surface quality while the 55° rhomboid geometry and 0.8 mm corner radius deliver consistent results in continuous turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG 150608 NS9530 — Tungaloy indexable turning insert, 55° DNMG150608 NS9530 is a cermet finishing insert for ISO‑standard turning applications, designed for external and internal turning of steel with a focus on surface quality and low cutting forces Cermet grade NS9530 for fine finishing 55° rhomboid shape for versatile turning 0.8 mm corner radius for fine surface finish Double-sided chipbreaker, cylindrical hole Precise finishing with cermet for superior surface quality The uncoated cermet grade NS9530 provides a sharp cutting edge and reduced built‑up edge tendency, which translates into consistently high surface finish during finishing passes. Cermet is a ceramic‑metal composite combining high hardness with improved edge integrity, making it particularly suitable for low‑force, continuous cutting of steel where small depths of cut and predictable tool wear are required. This results in fewer reworks and improved batch uniformity for precision components. Geometry and clamping deliver stability and repeatability The rhomboid DNMG form with 55° cutting geometry and a 0.8 mm corner radius balances cutting strength and accessibility for profile and shoulder work. Plate thickness of 6.35 mm and the cylindrical hole support secure clamping and correct positioning in compatible ISO toolholders; compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness. The double‑sided chipbreaker design provides cost efficiency through multiple usable edges while maintaining stable chip control in steady‑state turning. Process benefits: efficiency, consistency and predictable tool life Selecting the NS9530 finishing grade with an appropriately matched chipbreaker and cutting parameters reduces cutting forces and heat generation, which improves tool life and repeatability across production runs. The combination of sharp edge geometry and cermet wear behaviour supports economical finishing cycles, especially for components requiring tight surface specifications. For continuous turning and small feed strategies, this solution enhances machining reliability and reduces downtime related to secondary finishing. Practical details for inventory and system integration The insert is supplied as an ISO‑standard DNMG indexable plate and integrates into the standard system consisting of an insert, the matching external holder or boring bar, support pad/clamp set and replacement screws. Article number 6944603 and manufacturer SKU TUN6944603 identify the item for reordering and stock control. For machining trials, select the chipbreaker and grade to match material, cutting mode and machine stability to exploit the insert’s finishing potential fully. For precision finishing with proven Tungaloy performance, request the DNMG150608 NS9530 insert from Metav Werkzeuge and discuss application parameters with our advisors at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6944603 Manufacturer SKU: TUN6944603 ISO designation: DNMG150608 Model series: ISO turning indexable inserts Material type: uncoated cermet (NS9530) Application: turning Facts Plate size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.8 mm Relief angle: 0° Main cutting angle: 55° Hole style: cylindrical hole Special features Rhomboid DNMG form Double-sided chipbreaker Uncoated cermet grade NS9530 For external and internal turning ISO‑standard compatibility System requires matching holder, pad and screws FAQ What materials is this insert best suited for? The DNMG150608 NS9530 insert is optimised for machining steel and performs particularly well in finishing operations where low cutting forces and excellent surface finish are required. How many usable edges does the insert provide? With its double‑sided design the DNMG150608 offers multiple effective cutting edges, helping to extend overall economy per insert; exact edge count depends on regrinding and indexing practice. Which holders fit the DNMG150608 insert? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; use ISO‑standard DNMG holders or consult holder specifications to ensure correct fit with the DNMG150608 NS9530. Is the NS9530 grade coated or uncoated? The NS9530 grade is supplied uncoated and is a cermet finishing grade engineered for sharp edges and low cutting forces in continuous turning of steel. Where can the article number and SKU be found for ordering? Use article number 6944603 and manufacturer SKU TUN6944603 when reordering the Tungaloy DNMG150608 NS9530 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T505 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, robust edge geometry and clear holder compatibility for dependable, productive turning of cast iron; order directly via Metav Werkzeuge or request application advice from our consultants. DNMG 150608 T505 ISO turning indexable insert — CVD-coated carbide for cast iron, rhombic 55° (Tungaloy) The DNMG150608 T505 is an ISO-format indexable insert designed for external and internal turning, optimised for the economical machining of cast iron. CVD-coated carbide for cast iron machining ISO rhombic insert 55° lead angle 0.8 mm nose radius for edge strength Double-sided chipbreaker; cylindrical hole; 6.35 mm thick Productive machining of cast iron with a CVD-coated grade The DNMG150608 T505 grade combines a CVD-coated surface with a wear-resistant carbide substrate to deliver consistent cutting performance when machining cast iron. The coating reduces built-up edge and increases allowable cutting speeds, which contributes to lower cycle times and a better cost per part in medium- to high-volume turning operations. Selection of this grade supports stable chip formation and predictable tool life, making it suitable for interrupted cuts and variable workpiece stability. Secure clamping and robust edge geometry for repeatable results The rhombic 55° geometry and 0° relief angle ensure the insert seats reliably in standard ISO toolholders; the cylindrical hole and compatible fastening provide axial and radial support for torque transmission. A 0.8 mm nose radius offers a compromise between edge strength and surface finish, while the double-sided chipbreaker enables two cutting edges per face and stable chip control in typical cast-iron applications. These design elements together reduce vibration sensitivity and help maintain surface quality across batch runs. System-oriented use and practical selection advice As part of an ISO insert system, compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness; the plate’s 6.35 mm thickness and 15 mm nominal size make it suitable for a wide range of standard holders. The combination of grade, chipbreaker and cutting data should be chosen according to workpiece stability and desired cutting speed: this approach prioritises throughput while limiting wear-related downtime. For customers seeking process reliability, the technical data and the matching holder assembly ensure predictable performance and straightforward re-indexing during production. Contact Metav Werkzeuge for personalised application checks, holder compatibility guidance and order support for Tungaloy turning inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6831241 Manufacturer SKU: TUN6831241 SKU: 6831241-Tungaloy Designation: DNMG150608 Facts Insert size: 15 mm Thickness: 6.35 mm Nose radius: 0.8 mm Lead angle: 55° Special features Grade: T505 Material: CVD-coated carbide Chipbreaker: double-sided Hole: cylindrical, with hole Shape: rhombic Relief angle: 0° Typical application: external and internal turning of cast iron FAQ What materials is this insert intended for? The DNMG150608 T505 insert is formulated for the economical machining of cast iron, with a CVD-coated carbide construction optimised for stable chip formation in that material class. How does the chipbreaker design affect performance? The double-sided chipbreaker on this insert improves chip control and helps maintain consistent cutting forces, which supports higher productivity and surface quality during turning operations. Is this insert compatible with standard ISO holders? Yes — the insert follows ISO geometry rules; compatibility with a given holder is determined by form, clearance angle, tolerance class, fixing method, size and thickness. How many cutting edges are available per insert? The double-sided design provides multiple usable cutting edges; combined with the rhombic shape and cylindrical hole, it allows secure clamping and economical re-indexing. What datum identifies this specific item for ordering? Order using article number 6831241 or manufacturer SKU TUN6831241 for the Tungaloy DNMG150608 T505 indexable insert (SKU 6831241-Tungaloy). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T5105 Wendeplatten - Tungaloy
High-performance CVD-coated carbide grade T5105 combined with the ISO DNMG150608 geometry and a 0.8 mm corner radius offers reliable wear resistance and consistent surface quality in stable, high-speed cast iron turning; order the DNMG150608 T5105 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed DNMG150608 T5105 Tungaloy turning insert — CVD-coated carbide for turning DNMG150608 T5105 is an ISO-format indexable turning insert designed for external and internal turning operations where stable set-ups and high cutting speeds are required CVD-coated carbide grade T5105 ISO DNMG150608 rhombic shape 0.8 mm corner radius for controlled finishes Cylindrical hole with double-sided chipbreaker Boosted tool life through optimised coating and grade The combination of a CVD-coated surface and a wear-resistant T5105 grade reduces flank wear and extends edge life under high-speed conditions. This specification is tailored for the productive machining of cast iron, where thermal and abrasive loads are significant; the coating improves heat resistance and adhesion, so machining cycles remain efficient. For workshop planning this translates into fewer tool changes and steadier cycle times, supporting higher overall productivity. Consistent part quality from precise geometry The ISO DNMG150608 geometry and rhombic form deliver predictable cutting action and stable chip flow when paired with a suitable holder. The 0.8 mm corner radius balances strength and surface finish, helping to achieve repeatable dimensional accuracy and improved surface integrity. The insert’s double-sided chipbreaker aids chip control in turning operations, reducing interruptions and lowering the risk of rework in production runs. System compatibility and practical handling Designed as part of the ISO turning insert family, the insert fits a wide range of external holders and boring bars when the form, clearance angle, tolerance class, fastening and thickness match. The cylindrical hole enables secure clamping and straightforward indexability, while the standardised size supports easy inventory management in multi-machine shops. Selection of the correct chipbreaker and grade for the workpiece material and stability condition ensures optimal machining performance. For tailored recommendations and immediate availability of the Tungaloy DNMG150608 T5105 insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6850227 Manufacturer SKU: TUN6850227 SKU: 6850227-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade: T5105 Application: Turning Cutting geometry: DNMG150608 Facts Corner radius: 0.8 mm Included angle: 55° Plate thickness: 6.35 mm Size designation: 15 mm Special features CVD-coated carbide cutting material Rhombic plate form Cylindrical hole (with hole) Double-sided chipbreaker ISO-format indexable insert Compatible with standard external holders and boring bars FAQ What materials is this insert best suited for? The DNMG150608 T5105 insert is optimised for the high-speed machining of cast iron; the CVD-coated T5105 grade gives enhanced wear resistance under abrasive conditions. Is the insert reversible or single-use? This indexable insert is double-sided with a chipbreaker on each side, allowing rotation to a fresh cutting edge when one edge is worn. How is compatibility with a holder determined? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the ISO DNMG150608 geometry follows standardised dimensions for straightforward matching. Does the insert include a coating and what type is it? Yes—the insert uses a CVD coating applied to a wear-resistant carbide substrate, specified as grade T5105 for improved heat and abrasion performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance and a robust rhombic geometry for consistent high-speed turning results; order the insert via Metav Werkzeuge or consult our specialists for machining recommendations. DNMG150608 T5105 rhombic turning insert (55°), CVD-coated carbide — Tungaloy A DNMG150608 T5105 indexable cutting insert engineered for high-speed turning of cast iron under stable cutting conditions, suitable for both external and internal turning when matched to the correct holder and chipbreaker. CVD-coated carbide grade T5105 for cast iron 55° rhombic geometry, 0° relief Double-sided chipbreaker, cylindrical hole 0.8 mm corner radius, 6.35 mm plate thickness Increased productivity for cast-iron turning The CVD-coated carbide composition of this insert is formulated for high-speed machining, providing wear resistance and thermal stability during continuous cuts. In practice, this means longer effective tool life and fewer index changes when machining grey and nodular cast iron. The combination of grade and geometry supports stable cutting at elevated speeds, reducing downtime and increasing throughput in repetitive turning operations. Fast compatibility and predictable tool changes Built to the ISO form, the rhombic shape with a 55° cutting edge ensures broad compatibility with standard turning holders. The ISO designation simplifies tool selection across systems, while the cylindrical hole and standard mounting dimensions enable quick replacement and secure clamping. With a plate thickness of 6.35 mm, the insert offers sufficient rigidity for medium to heavy turning tasks without compromising accessibility in tighter tool positions. Better chip control and surface integrity The double-sided chipbreaker is designed to promote controlled chip formation and evacuation, which directly contributes to a consistent surface finish on workpieces. By selecting the appropriate chipbreaker and using the insert within its intended application window, chip piling and re-cutting risks are minimised, translating into fewer secondary operations and improved process reliability for batch or single-pass components. Practical guidance for application and setup For best results, pair the insert with a holder that matches form, clearance angle and tolerance class; the 0° relief angle is suited to situations where rigidity and axial support are prioritised. The corner radius 0.8 mm balances edge strength and finish, making the insert suitable for general turning where a combination of edge durability and acceptable surface quality is required. The grade performs particularly well under productive machining regimes when conditions remain stable and vibrations are controlled. Contact Metav Werkzeuge for personalised recommendations on the DNMG150608 T5105 Tungaloy insert and to ensure optimal holder selection and cutting parameters Technical data Article number: 6850225 Manufacturer SKU: TUN6850225 SKU: 6850225-Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts Geometry: DNMG150608 (rhombic) Insert size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 0° Special features Grade/coating: T5105 (CVD-coated) Chipbreaker: double-sided Hole style: cylindrical hole Application: turning (external and internal) Compatibility: ISO holders (form, clearance, tolerance dependent) Typical use: high-speed machining of cast iron under stable conditions FAQ What materials is this insert best suited for? The DNMG150608 T5105 insert is formulated for high-speed machining of cast iron; the T5105 grade provides wear resistance and thermal stability suited to this material group. Can this insert be used in common ISO turning holders? Yes, the DNMG150608 geometry conforms to ISO forms and is compatible with standard holders provided form, clearance angle, tolerance and clamping fit are matched. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker on this insert promotes controlled chip formation and evacuation, improving chip control and contributing to a consistent surface finish during turning operations. What cutting edge strength can be expected from the 0.8 mm radius? A corner radius of 0.8 mm offers a balance between edge robustness and surface quality, providing sufficient edge strength for general turning while maintaining acceptable finish levels. Is the DNMG150608 T5105 suitable for roughing or finishing? The insert is versatile: the grade and geometry favour productive machining and stable roughing at higher speeds, while the corner radius and chipbreaker can also deliver satisfactory finishing when parameters are adjusted. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide and a 55° rhombic geometry for stable, high-speed cast iron turning; the double-sided chipbreaker and cylindrical hole ensure secure clamping and repeatable performance. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150608 T5105 turning insert (ISO) for turning — Tungaloy, 55° rhombic, cylindrical hole DNMG 150608 T5105 is an ISO rhombic turning insert designed for productive, high-speed machining of cast iron under stable conditions. ISO-indexable rhombic insert 55° CVD-coated carbide grade T5105 Optimised for high-speed cast iron turning Double-sided with cylindrical hole, 0.8 mm radius High-speed performance from a CVD-coated carbide grade The combination of a CVD coating with cemented carbide substrate offers improved wear resistance and thermal stability during elevated cutting speeds. This grade is formulated for the demands of cast iron turning, where abrasive wear and built-up edge can reduce tool life. The coating acts as a barrier against abrasive particles and heat, so the insert maintains a sharper cutting edge for longer, which translates into more consistent component tolerances and fewer tool changes. For manufacturing environments where cycle time and predictable performance matter, this geometry and coating yield measurable productivity gains. Geometry and clamping for repeatable accuracy The 55° rhombic geometry with a 0° relief and a 0.8 mm corner radius provides a balance between strength and versatility: it enables secure engagement in external and internal turning while supporting stable cutting on interrupted or continuous surfaces. The insert’s 6.35 mm thickness and cylindrical hole with double-sided seating allow for positive clamping in compatible holders, reducing micro-movement that can degrade surface finish. Using the ISO standard form simplifies inventory and replacement; compatibility depends on form, clearance angle, tolerance class, attachment method, size and thickness, so holders should be selected or verified accordingly to achieve repeatable alignment and optimum force transmission. Chip control, economy and application guidance A double-sided chipbreaker on this insert improves chip formation and evacuation when machining grey and nodular cast iron under stable setups, reducing the risk of entanglement and helping to protect the workpiece and toolholder. Effective chip control supports longer uninterrupted runs and reduces manual intervention. In practice, matching cutting data and coolant strategy to the workpiece and machine rigidity is crucial: the insert performs best in steady setups at higher cutting speeds typical for cast iron. For mixed-operation shops, the insert’s indexable nature offers economical edge usage—simply rotate to a fresh cutting edge when worn, maintaining production flow with low downtime. For tailored application advice or to purchase the DNMG 150608 T5105 turning insert from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852977 Numbers / Core technical data Insert designation: DNMG150608 ISO series: ISO turning indexable inserts Corner radius: 0.8 mm Insert size: 15 mm Thickness: 6.35 mm Relief angle: 0° Geometry angle: 55° Designs / Special features Material: cemented carbide Coating: CVD-coated Grade/sort: T5105 Hole: with cylindrical hole Shape: rhombic Chipbreaker: double-sided Application: turning Compatibility: ISO form, holder determined by form, clearance angle, tolerance class, attachment, size and thickness FAQ What materials is this insert suited for? The DNMG 150608 T5105 insert is optimised for machining cast iron; the CVD-coated cemented carbide grade provides wear resistance suitable for high-speed turning of grey and nodular cast iron. How is the insert fixed in the holder? The insert uses a cylindrical hole and is double-sided; secure clamping is achieved with compatible ISO holders that match form, clearance angle, tolerance class, attachment method, size and thickness. What advantage does the T5105 grade bring? T5105 is a CVD-coated, wear-resistant carbide grade formulated for high-speed cast iron turning, offering improved edge life and consistent surface quality under stable cutting conditions. How many usable cutting edges are available? With a double-sided rhombic design, the insert provides multiple indexable edges; when an edge becomes worn, the insert is rotated or replaced to restore cutting performance. Is the geometry suitable for both external and internal turning? Yes, the 55° rhombic form and 0.8 mm corner radius make the insert versatile for both external and internal turning operations, provided the holder and setup deliver sufficient rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T5115 Wendeplatten - Tungaloy
Combining a CVD-coated carbide grade with a 0.8 mm corner radius and a double-sided chipbreaker, this insert delivers robust edge stability and economical indexing for cast iron turning. Order the DNMG150608 T5115 directly via Metav Werkzeuge or consult our advisors for holder compatibility and application support. DNMG150608 T5115 — DNMG turning insert (CVD-coated) by Tungaloy A DNMG150608 T5115 indexable insert designed for general turning applications, optimised for cast iron and reversible use. CVD-coated carbide for high wear resistance Universally suited to cast iron turning Double-sided chipbreaker for economical indexing Rhombic 55° form with 0.8 mm corner radius Reliable cutting performance for cast iron and general turning The DNMG150608 T5115 is built on a CVD-coated carbide substrate that balances wear resistance with edge stability, making it a dependable choice for productive cast iron machining. The T5115 grade offers a universal performance profile that reduces the need for frequent insert changes and supports longer uninterrupted cycles. This combination results in improved process reliability and consistent component quality when turning exterior and interior diameters. Secure clamping and economical indexing reduce tooling costs Designed as a rhombic ISO plate with a 55° included angle and a 0° clearance, the insert ensures predictable cutting geometry across common turning set-ups. The plate’s cylindrical hole and standard dimensions (15 mm size, 6.35 mm thickness) enable stable attachment to compatible holders and boring bars. The double-sided chipbreaker provides two cutting edges per index, translating into immediate cost savings through extended insert life and reduced waste. The 0.8 mm corner radius gives a compromise of edge strength and surface finish for many cast iron turning tasks. System compatibility and practical handling in workshop workflows This insert is part of an ISO indexable turning plate system: correct performance depends on matching the plate form, relief angle, tolerance class, fastening method, size and thickness with the chosen holder, shim and clamping screws. The CVD coating supports consistent chip formation and reduces flank wear under standard feeds and depths for cast iron. For internal operations the same principles apply when the plate is paired with a suitable boring bar. Metav Werkzeuge can advise on the matching outer holder or boring bar, the required underlay/shim and the correct replacement screws to ensure secure mounting and optimal cutting behaviour. Practical benefits for production and process planners Adopting the DNMG150608 T5115 provides measurable advantages in batch and continuous turning setups: fewer index changes, stable edge life due to the CVD-coated surface, and improved chip control from the double-sided chipbreaker. The standard geometry simplifies tool management across machines and operators while ISO conformity eases procurement and storage logistics. For operations focused on cost-efficiency and repeatable results in cast iron, this plate offers a robust technical basis for reliable output. For high-productivity cast iron turning with Tungaloy’s proven T5115 grade, contact Metav Werkzeuge to request the DNMG150608 insert or to obtain application guidance at info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical Data Article number: 6850231 Manufacturer SKU: TUN6850231 Manufacturer: Tungaloy Data Size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Included angle: 55° Relief angle: 0° Hole: cylindrical hole Indexable: double-sided (reversible) Special features CVD-coated carbide grade T5115 Suited for cast iron machining Rhombic plate form (DNMG) Double-sided chipbreaker for chip control ISO-standard indexable turning plate series Compatible with matching holder, shim and screws FAQ Is the insert suitable for both external and internal turning? The DNMG150608 T5115 insert is suitable for both external and internal turning when used with an appropriate outer holder or boring bar and correct clamping geometry. Which materials is this grade intended for? The T5115 grade is a universal choice primarily designed for cast iron, offering a balanced combination of wear resistance and edge stability for reliable turning. How does the double-sided chipbreaker benefit production? The double-sided chipbreaker on the DNMG150608 provides two usable cutting edges per insert, improving economy through reversible indexing and promoting consistent chip formation for stable machining. What determines compatibility with a toolholder? Compatibility depends on the plate form, relief angle, tolerance class, fastening type, plate size and thickness; these aspects should match the holder specifications for the DNMG150608 T5115 to ensure secure clamping and correct cutting geometry. What effect does the 0.8 mm corner radius have on machining? A 0.8 mm corner radius offers increased edge strength compared with smaller radii, supporting moderate feeds and depths while contributing to a good compromise between component surface finish and insert durability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T5115 Wendeplatten - Tungaloy
Combining a CVD-coated cemented carbide grade with a rhombic 55° geometry and a double-sided chipbreaker, this insert delivers stable performance and predictable tool life in cast iron turning; order directly via Metav Werkzeuge or request application advice from our consultants. DNMG150608 T5115 — Tungaloy turning indexable insert, CVD-coated cemented carbide The DNMG150608 T5115 is an ISO rhombic indexable insert for turning, optimised for cast iron applications and designed to improve chip control and edge stability. CVD-coated cemented carbide T5115 Optimised for cast iron machining Rhombic 55° geometry, 0° clearance Double-sided chipbreaker, with hole Consistent performance for cast iron turning The CVD-coated cutting grade T5115 combines a wear-resistant substrate with a thermally stable coating to deliver a balanced mix of wear resistance and edge stability when machining cast iron. This balance reduces unexpected tool failures and favours longer, predictable tool life, which in turn supports smoother production runs and lower rework rates. For workshops seeking to raise throughput without compromising surface finish, the coating helps maintain cutting-edge integrity under elevated cutting temperatures. Compatibility and geometry that simplify setup The rhombic insert form with a 55° lead angle and 0° clearance is suited to a wide range of turning tasks; the insert’s 15 mm inscribed circle and 6.35 mm thickness are standard dimensions for many ISO toolholders. The double-sided chipbreaker and cylindrical hole ensure secure clamping and consistent chip formation, while the geometry allows reliable cutting at varied depths of cut. Note that holder compatibility depends on form, clearance angle, tolerance class, attachment, size and thickness; selecting the correct chipbreaker and grade according to material, machining type and machine stability is essential for optimal results. Practical guidance for efficient turning operations Suited for both external and internal turning, this indexable insert supports controlled chip control and improves overall productivity when paired with an appropriate holder and clamp set. The CVD coating reduces adhesion of iron-rich material at the cutting edge, lowering the risk of edge chipping under interrupted cuts and enabling steadier performance over the insert’s life. Keep replacement intervals predictable by monitoring wear on the cutting edge rather than on time alone; matching the insert with the correct holder and tightening sequence reduces vibration and extends tool life. If further machining data or application parameters are needed, technical assistance is available. Contact Metav Werkzeuge for tailored advice on using Tungaloy CVD-coated inserts and to arrange supply of DNMG150608 T5115 for reliable cast iron turning; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6850228 Manufacturer SKU: TUN6850228 Seller SKU: 6850228-Tungaloy Brand: Tungaloy Designation: DNMG150608 Grade: T5115 Material: Cemented carbide Key measurements Inscribed circle: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Lead angle: 55° Hole style: cylindrical hole Special features CVD-coated cutting grade Universal for cast iron machining Double-sided chipbreaker Rhombic insert form ISO-standard indexable insert Compatibility: form, clearance, tolerance, attachment, size, thickness FAQ What materials is this insert suitable for? The Tungaloy DNMG150608 T5115 is a universal grade formulated primarily for cast iron machining and provides a balance between wear resistance and edge stability. How does the CVD coating benefit machining performance? A CVD-coated surface on this insert improves thermal resistance and reduces adhesion of iron-rich material, which helps maintain edge strength and extends usable tool life. Can this insert be used for both external and internal turning? Yes, the insert’s rhombic geometry and double-sided chipbreaker make it suitable for both external and internal turning operations when matched with an appropriate holder. What should be checked for toolholder compatibility? Compatibility depends on the insert’s form, clearance angle, tolerance class, attachment method, size and thickness; ensure the holder matches the 15 mm inscribed circle and 6.35 mm thickness for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T5115 Wendeplatten - Tungaloy
The combination of CVD-coated carbide T5115, a rhombic 55° geometry and a reliable double-sided chipbreaker delivers wear-resistant, stable-edge performance for cast-iron turning; the ISO form ensures straightforward holder compatibility. Order the DNMG150608 T5115 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150608 T5115 Turning Insert by Tungaloy — CVD-coated carbide for cast iron DNMG150608 T5115 is an ISO turning insert for general external and internal turning, offering balanced wear resistance and edge stability for cast-iron applications. DNMG 150608 geometry for standard toolholders CVD-coated carbide grade T5115 Universal grade optimised for cast iron Double-sided chipbreaker, rhombic 55° shape Reliable cutting performance for heavy cast-iron turning The DNMG150608 insert is produced in a CVD-coated carbide matrix, grade T5115, giving a balance between wear resistance and cutting-edge stability that is particularly suited to cast-iron machining. The CVD coating improves surface hardness and thermal resistance, which reduces flank wear during prolonged runs. As a result, cycle times remain consistent and tool changes become less frequent, supporting uninterrupted production and better cost-efficiency in serial turning operations. Simple integration into ISO tool systems and predictable results Compatibility is determined by the insert’s form, relief angle, tolerance class, fastening method, size and thickness. The rhombic 55° shape with a 0° clearance and a corner radius of 0.8 mm makes the insert versatile for facing, light profiling and general turning tasks. The item is intended for use with the appropriate ISO DNMG holder or boring bar and requires the correct clamping set and replacement screws for secure seating. Choosing a chipbreaker and grade matched to the material and process stability ensures improved chip control and repeatable surface finish. Practical guidance for workshop use and process safety The double-sided chipbreaker enhances chip formation and evacuation when turning cast iron, helping to prevent entangling or built-up edge in intermittent cuts. With an insert thickness of 6.35 mm and a central cylindrical hole, the geometry supports accurate seating and stable cutting forces. In production environments where process reliability and predictable tool life matter, this insert supports efficient chip control, reliable surface quality and consistent part tolerances. For medium to high-volume turning, pairing the insert with a robust holder and correct cutting data will maximise productivity and tool life. Contact Metav Werkzeuge for tailored advice on tooling setups and to confirm suitability of the Tungaloy DNMG150608 T5115 insert for a specific turning application — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical information Article number: 6850226 Manufacturer SKU: TUN6850226 Label: DNMG150608 T5115 Tungaloy insert Facts Size: 15 Thickness: 6.35 mm Corner radius: 0.8 mm Relief angle: 0° Insert angle: 55° Special features Grade: T5115 (CVD-coated carbide) Shape: rhombic Hole: cylindrical, with hole Chipbreaker: double-sided Application: turning (external and internal) Model series: ISO turning indexable inserts FAQ What workpieces is this insert best suited for? This insert is optimised for cast-iron machining; the T5115 grade and chipbreaker combination provide wear resistance and reliable edge stability for a wide range of cast-iron turning tasks. How is compatibility with a toolholder determined? Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; the ISO DNMG150608 geometry ensures fitment with standard DNMG toolholders when those parameters match. How many cutting edges are available per insert? The insert is double-sided with a chipbreaker on each cutting edge; the actual number of usable edges depends on indexing practice and wear, permitting multiple edge changes per insert. Can this insert be used for internal turning (boring)? Yes, the rhombic 55° geometry and balanced grade make it suitable for certain internal turning operations when mounted in a compatible boring bar or holder. What benefits does the CVD coating provide? The CVD coating on the T5115 grade improves thermal resistance and surface hardness, reducing flank wear and extending tool life under typical cast-iron cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T5115, ISO‑standard DNMG 150608 geometry and a double-sided chipbreaker for consistent, productive turning in cast iron; order the DNMG150608 T5115 Tungaloy indexable insert directly via Metav Werkzeuge or consult our advisers if further process support is required. DNMG150608 T5115 indexable insert for turning — Tungaloy The DNMG150608 T5115 indexable insert is designed for versatile external and internal turning, offering a balanced mix of wear resistance and cutting-edge stability for cast iron machining. CVD-coated carbide grade T5115 ISO-standard DNMG 150608 geometry Double-sided chipbreaker for longer tool life Cylindrical hole for secure clamping Consistent cutting performance with CVD-coated carbide The insert’s CVD-coated carbide grade T5115 provides a controlled combination of wear resistance and edge stability, which benefits cycle times and part repeatability when machining cast iron. Chemical vapour deposition (CVD) forms a hard, wear-resistant layer that reduces flank wear and extends edge life under intermittent cuts. In practice, this means fewer insert changes and steadier surface quality across production runs. The rhombic plate geometry and 55° cutting angle enable reliable entry and exit behaviour in external and internal turning, while the ISO designation ensures compatibility with standard holders. Secure clamping and optimised chip control for predictable results The plate’s cylindrical hole and 6.35 mm thickness deliver robust clamping and repeatable seating in compatible ISO toolholders, reducing the risk of vibration-related edge deterioration. The double-sided chipbreaker offers two usable cutting edges per indexation, improving economic efficiency by doubling service life compared with single-sided options. A corner radius of 0.8 mm provides a compromise between edge strength and surface finish: larger radii support higher feed rates and stronger cutting edges, while still delivering acceptable part quality in many turning operations. System integration and application guidance for stable machining The item fits into an ISO indexable insert system consisting of a matching external holder or boring bar, support pads or clamping set, and replacement screws; correct selection of form, clearance angle and tolerance class determines compatibility. For cast iron applications, the T5115 grade is tuned to strike a balance between tool life and edge integrity, while the rhombic plate shape and 55° approach angle are suited to both finishing and medium-duty roughing passes. When selecting the chipbreaker and insert grade, consider workpiece rigidity, machine power and the required surface specification to achieve a stable process and predictable machining economy. For application advice, availability and to source Tungaloy indexable inserts including DNMG150608 T5115, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and supply. Technical data Article number: 6852978 Manufacturer SKU: TUN6852978 SKU: 6852978-Tungaloy Model series: ISO-Drehwendeschneidplatten Type: DNMG Facts ISO designation: 150608 Angle: 55° Corner radius: 0.8 mm Thickness: 6.35 mm Plate size: 15 mm Special features Grade: T5115 (CVD-coated carbide) Plate form: rhombic Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Application: turning Compatible with ISO holders and clamping systems FAQ What materials is this insert best suited for? The DNMG150608 T5115 insert is specified as a universal grade for cast iron, offering a balance of wear resistance and edge stability that suits a wide range of cast iron turning tasks. How does the CVD coating affect tool life? A CVD-coated carbide like T5115 provides a hard, abrasion-resistant surface that reduces flank wear and extends cutting-edge life under typical turning loads for cast iron. Is the DNMG150608 compatible with standard ISO holders? Yes; the geometry, thickness and fastening arrangement correspond to ISO standards, so the insert is compatible with matching DNMG‑type holders when the clearance angle and tolerance class align. What benefit does the double-sided chipbreaker provide? A double-sided chipbreaker supplies two usable cutting edges per indexation and improved chip formation, increasing cost-efficiency and maintaining process stability across multiple tool changes. Does the corner radius influence surface finish? The 0.8 mm corner radius offers a compromise between edge strength and finish quality: it enhances edge robustness while still permitting fine surface results with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T5125 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T5125 and the proven DNMG150608 geometry for reliable performance when turning cast iron under interrupted or less stable conditions. Order the insert directly from Metav Werkzeuge or contact their team for application-specific compatibility checks. DNMG150608 T5125 turning insert for turning by Tungaloy The DNMG150608 T5125 is an ISO-standard rhombic turning insert designed for external and internal turning of cast iron, offering robust edge strength for interrupted cuts. CVD-coated carbide for higher toughness Optimised for cast iron and interrupted cuts Rhombic 15 mm form with 6.35 mm thickness Cylindrical hole and double-sided chipbreaker Reliable cutting performance with a tougher grade The T5125 grade is a CVD-coated carbide formulation developed for increased toughness in demanding cast-iron applications. Thanks to its balanced substrate and coating combination, the grade reduces edge chipping during interrupted machining and when working with less rigid set-ups. This results in more consistent tool life, fewer unplanned indexings and improved process stability, which together support higher productivity on parts that require frequent engagement and disengagement of the cutting edge. Clear geometry and ISO compatibility to simplify tooling choices The insert follows ISO dimensions and the rhombic form provides a versatile 55° cutting angle suitable for diverse turning tasks. With a nominal size of 15 mm and a plate thickness of 6.35 mm, the geometry ensures mechanical stability in typical external and internal turning operations. The insert features a 0.8 mm corner radius that balances edge strength and surface finish. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness — matching these parameters enables reliable clamping and repeatable results. Integration into a complete turning system This ISO insert is designed to work as part of a system comprising a suitable external holder or boring bar, a shim/clamp set and replacement screws. The insert’s cylindrical hole and double-sided chipbreaker support straightforward mounting and economical use of both cutting edges. Selecting the correct chipbreaker and the T5125 grade according to workpiece material and stability will optimise chip control and surface integrity, reducing secondary operations and increasing throughput on cast-iron components. Better throughput and predictable results in daily machining Using a purpose-engineered grade and standardised geometry enables predictable tool change intervals and stable chip formation. The combination of CVD-coated carbide toughness and an ISO-compliant insert form helps to avoid sudden edge failure and supports consistent surface quality. For operations where reliability and repeatability matter, this approach lowers scrap rates and contributes to efficient, cost-effective production over longer runs. Contact Metav Werkzeuge for application advice on Tungaloy T5125 inserts, compatibility checks and technical documentation — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6850229 Manufacturer SKU: TUN6850229 Manufacturer: Tungaloy Model series: ISO turning inserts Core data Insert designation: DNMG150608 Grade: T5125 Material: carbide Radius: 0.8 mm Size: 15 mm Plate thickness: 6.35 mm Included angle: 55° Clearance angle: 0° Special features CVD-coated carbide Rhombic plate shape Cylindrical hole Double-sided chipbreaker Suited for cast iron and interrupted cuts System: holder, shim/clamp set and replacement screws FAQ What materials is this insert best suited for? The DNMG150608 T5125 insert is optimised for cast iron, particularly where interrupted cuts or less rigid set-ups are expected. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures the DNMG150608 seats and clamps correctly. How does the T5125 grade improve performance? The T5125 CVD-coated grade increases toughness and resistance to edge chipping, yielding more consistent tool life during interrupted machining of cast-iron components. Can both sides of the insert be used? Yes, the insert has a double-sided chipbreaker, allowing economical use of multiple cutting edges before replacement. What system components are required to mount the insert? A suitable external holder or boring bar, a shim/clamp set and replacement screws are required to assemble the complete turning system with this insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T5125 Wendeplatten - Tungaloy
Take advantage of a tough T5125 CVD-coated carbide and ISO conformity for stable results in interrupted turning operations; ideal where edge strength and chip control are decisive. Order directly via Metav Werkzeuge or consult the team for tailored holder compatibility and delivery options. DNMG150608 T5125 turning insert (ISO) by Tungaloy — CVD-coated carbide, rhombic 15 mm, 55° A DNMG150608 T5125 ISO turning insert engineered for external and internal turning, offering a robust grade for cast iron in interrupted cuts and reduced-clamp stability situations. CVD-coated carbide grade T5125 for durability Rhombic ISO DNMG 15 mm, 55° cutting geometry 0.8 mm corner radius for reliable edge strength Double-sided chipbreaker, suitable for interrupted cuts Consistent cutting performance through a tougher carbide grade The combination of a CVD-coated surface and a T5125 substrate delivers enhanced wear resistance and predictable flank life in demanding turning tasks. This coating reduces abrasive wear while the tougher substrate prevents chipping during start–stop or interrupted cuts, which means fewer unplanned insert changes and improved uptime. As a result, machining stability is maintained even when process conditions are less rigid, supporting consistent batch throughput and lower lifecycle tool costs. Simple integration with ISO tool systems for fast changeovers Built to ISO form and dimensions, the insert is compatible with standard external holders and boring bars when the holder matches form, relief angle, tolerance class, fastening method, size and thickness. The rhombic DNMG 15 outline with a 55° cutting angle and a 6.35 mm thickness allows secure clamping and predictable engagement. A cylindrical centre hole ensures repeatable seating and torque transmission; the insert is part of a system comprising an ISO insert, matching holder, shim/clamping set and replacement screws for seamless installation. Designed for cast iron and unstable cutting conditions The chosen grade is expressly tougher to cope with the interrupted chips and variable contact typical of cast iron operations. The double-sided chipbreaker is tuned for controlled chip formation, reducing the risk of built-up edge and stabilising cutting forces. A 0.8 mm corner radius further enhances edge strength and contributes to surface integrity on rougher cast-iron surfaces, while allowing operators to keep cutting depths and feed rates at productive levels without compromising tool life. Practical workshop guidance and assurance for buyers Choosing inserts that match the clamping geometry and process stability is decisive for achieving repeatable results; the ISO standard simplifies selection, while the specified grade targets cast-iron applications. If uncertainty remains about holder compatibility or the optimal chipbreaker for a given cycle time, technical consultation can clarify the match and prevent premature wear. Confidence in supply and reproducible results supports smoother planning and fewer stoppages on the shop floor. For technical advice on matching holders or to secure stock of the Tungaloy DNMG150608 T5125 insert, contact Metav Werkzeuge for an application review and supply options. Technical data Article number: 6850232 Manufacturer SKU: TUN6850232 SKU: 6850232-Tungaloy Name: DNMG150608 T5125 Tungaloy-Wendeplatte Core data Plate designation: DNMG150608 Cutting angle: 55° Relief angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Corner radius: 0.8 mm Special features Schneidstofftyp: CVD-coated carbide Grade: T5125 Shape: rhombic Chipbreaker: double-sided Hole: with cylindrical hole Application: turning Model series: ISO turning inserts Material: carbide FAQ Is this insert suitable for external and internal turning? Yes. The DNMG150608 insert is designed for both external and internal turning when used with the appropriate holder conforming to ISO form, size and clamping specifications. Which materials is the T5125 grade intended for? The T5125 CVD-coated grade is formulated for cast iron, especially where interrupted cuts or unstable clamping demand a tougher substrate to avoid chipping. How does the double-sided chipbreaker affect machining? The double-sided chipbreaker provides controlled chip formation and improved stability, which supports safer chip evacuation and more consistent surface finish during interrupted turning. What does the 0.8 mm corner radius deliver in practice? A 0.8 mm radius increases edge strength and reduces the risk of chipping at the corner, permitting more robust engagement and improved tolerance to process variations. Can the DNMG150608 be used in high-speed applications? Performance at high cutting speeds depends on machine rigidity, cooling and holder compatibility; the CVD coating supports wear resistance, but suitability should be validated against specific cycle parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T5125 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade that is tuned for cast iron and a rhombic 55° geometry that delivers stable cutting in interrupted operations; these attributes support longer tool life and consistent surface finish. Choose the DNMG150608 T5125 insert for reliable chip control and compatibility with ISO turning systems. Order the insert directly via (Metav Werkzeuge) or ask our consultants if needed. DNMG150608 T5125 — ISO turning insert for turning by Tungaloy, 55° The DNMG150608 T5125 is an ISO rhombic turning insert designed for external and internal turning, especially effective in interrupted cuts and less stable machining conditions. CVD-coated carbide grade T5125 Optimised for cast iron machining Double-sided chipbreaker, rhombic 55° form 0.8 mm nose radius, cylindrical-hole design Reliable performance for interrupted and unstable turning The CVD-coated T5125 grade combines a tougher substrate with a wear-resistant coating to cope with interrupted cuts and varying workpiece stability when machining cast iron. The rhombic 55° geometry reduces radial cutting forces and helps maintain dimensional accuracy on shafts and bores. In practice, this means fewer unplanned tool changes and a steadier production run; the coating reduces adhesive wear while the substrate absorbs impact, translating technical properties into measurable shop-floor reliability. Clear compatibility and straightforward mounting for fast tool swaps Compatibility with toolholders is governed by form, clearance, tolerance, fixation, size and thickness. The insert's ISO designation and standardised dimensions simplify selection of a matching outside holder or boring bar, and the cylindrical hole with standard fixing style ensures secure clamping. The indexable, reversible design with a double-sided chipbreaker provides practical advantages: economical edge utilisation and simplified inventory management. For engineering teams, this reduces process variation and shortens setup times without sacrificing precision. Improved chip control and surface consistency A double-sided chipbreaker engineered for castellated chip control helps to fragment chips consistently under varying depths of cut and feeds, which is particularly helpful in intermittent cuts. The 0.8 mm nose radius supports a good balance between surface finish and edge strength; a modest radius reduces cutting forces while still delivering acceptable surface quality. These characteristics contribute to lower scrap rates and less rework, supporting both productivity and confidence in delivered components. Material suitability and process advice The Tungaloy grade is specified for tougher performance on cast iron, making it suitable where interrupted cuts or marginal machine rigidity occur. The insert's 6.35 mm plate thickness and 15 mm inscribed circle relate directly to the stiffness and rigidity of the cutting edge—important factors when selecting feed and depth-of-cut parameters. For best results, pair the insert with a sturdy holder matched to the insert form and ensure the clamping torque aligns with the holder manufacturer's recommendations to maintain repeatable positioning and prolong tool life. Contact Metav Werkzeuge to discuss the suitability of Tungaloy inserts for specific materials and cycle times; product availability and application advice are provided directly by our consultants at Metav Werkzeuge Technical data Article number: 6852979 Manufacturer SKU: TUN6852979 SKU: 6852979-Tungaloy Designation: DNMG150608 Full name: DNMG150608 T5125 Tungaloy-Wendeplatte Core specifications Insert size: 15 mm Thickness: 6.35 mm Cutting angle: 55° Clearance angle: 0° Nose radius: 0.8 mm Materials & features Material: carbide Grade/coating: T5125 (CVD-coated) Chipbreaker: double-sided Hole style: cylindrical hole Shape: rhombic Application: turning Series: ISO turning indexable inserts FAQ What applications suit this insert best? The DNMG150608 T5125 insert is intended for external and internal turning, with particular strength in cast iron work and interrupted cutting conditions. Is the insert compatible with standard ISO holders? Compatibility is determined by ISO form, size and thickness; the DNMG150608 conforms to ISO dimensions and fits holders designed for this rhombic insert format. How does the T5125 grade affect tool life? The T5125 CVD-coated carbide offers enhanced toughness and wear resistance for interrupted cuts, which typically leads to longer edge life under unstable machining conditions. Can this insert be used for finishing passes? With a 0.8 mm nose radius, the insert balances edge strength and surface finish; it can be used for semi-finish to general finishing, depending on feed and depth-of-cut settings. What chip control benefits are provided? The double-sided chipbreaker promotes consistent chip formation and reduces the likelihood of problematic, long swarf during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T515 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide and an indexable, double-sided chipbreaker for economical, high-throughput turning of cast iron components; the ISO‑normed form and dimensional accuracy ensure reliable fit in standard holders. Order directly via Metav Werkzeuge or request expert advice from our consultants for process optimisation. DNMG150608 T515 ISO turning insert — DNMG 150608 for turning by Tungaloy DNMG150608 T515 is an ISO‑normed, rhomboid indexable insert designed for turning operations, optimised for economical machining of cast iron and compatible with standard ISO holders CVD-coated carbide grade T515 Double-sided, indexable geometry Rhomboid ISO form with 55° cutting angle 0.8 mm corner radius for robust edge Maximise productivity when turning cast iron with a tailored carbide grade The CVD-coated carbide in grade T515 provides a balance of wear resistance and economical performance for cast iron applications. Combined with the double-sided chipbreaker, this geometry promotes stable chip formation and helps prevent frequent interruptions due to poor chip control. The result is a measurable reduction in downtime and a more consistent surface finish during continuous or interrupted turning cycles, making the insert a sound choice where productivity and tool life must be balanced. Clear ISO compatibility and simple indexing for reduced set-up time Built to ISO standards, the insert’s rhomboid form, 6.35 mm thickness and cylindrical hole ensure secure seating and repeatable clamping in compatible holders. The specified 55° cutting angle and 0° relief are determinative for templating the correct holder and tolerance class; compatibility depends on matching form, relief, fastening and thickness. The indexable insert design allows rapid rotation or replacement, which shortens set-up intervals and maintains consistent cutting geometry without complex regrinding. Reliable process behaviour and recommended applications for stable machining For turning and facing of cast iron components, the DNMG150608 geometry paired with T515 promotes stable cutting under a range of cutting conditions. Choose the chipbreaker and grade according to part stability and whether the cut is continuous or interrupted; this selection affects feed, depth and achievable surface quality. When used with an appropriate outer holder and a correct clamping kit, the insert supports predictable wear patterns and repeatable results—factors that improve throughput and reduce scrap rates. For further specification matching or tailored recommendations, Metav Werkzeuge provides process consultancy and technical data. Request a technical consultation from Metav Werkzeuge for tailored grade and holder recommendations — contact info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance. Technical data Article number: 6733828 SKU: 6733828-Tungaloy Manufacturer SKU: TUN6733828 Model series: ISO-Drehwendeschneidplatten Facts ISO designation: DNMG150608 Plate size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 0° Special features Material: carbide Coating: CVD Grade: T515 Double-sided chipbreaker Rhomboid form Cylindrical hole (with hole) ISO‑normed indexable insert Application: turning Typical use: cast iron machining FAQ Which materials is this insert suited for? The DNMG150608 T515 insert is formulated for economical machining of cast iron, with the T515 grade and CVD coating optimised for that material class. How does the double-sided chipbreaker affect tool life? The double-sided chipbreaker on this indexable insert promotes stable chip control and enables re-indexing, which extends usable tool life through multiple cutting edges. What must be checked for holder compatibility? Compatibility is determined by insert form, relief angle, tolerance class, fastening style, size and thickness; ensure the holder matches the DNMG form and the 6.35 mm plate thickness. Can this insert be used for internal as well as external turning? Yes; the ISO‑normed geometry and robust corner radius support both external and internal turning when combined with a suitable holder and correct cutting parameters. What is the benefit of the 0.8 mm corner radius? The 0.8 mm corner radius provides a stronger cutting edge and improved resistance to chipping, aiding stability on interrupted cuts or heavier feeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, ISO compatibility and a compact corner radius 0.8 mm for consistent turning performance; order the DNMG150608 T6215 turning insert directly via Metav Werkzeuge or ask the consultants for application advice. DNMG150608 T6215 DNMG turning insert for Drehen by Tungaloy The DNMG150608 T6215 is an ISO-format rhombic turning insert intended for stable to lightly interrupted stainless-steel turning applications, offering a balance of edge stability and finish capability. ISO rhombic insert with 55° cutting angle CVD-coated carbide for rostfreier Stahl 0° clearance angle with cylindrical hole Corner radius 0.8 mm for reliable finish Consistent performance on rostfreier Stahl for productive turning The CVD-coated carbide grade T6215 delivers improved wear resistance and a robust cutting edge, which supports sustained productivity when machining rostfreier Stahl under stable or mildly interrupted conditions. The CVD layer increases surface hardness and temperature resistance, reducing flank wear and prolonging useful life. This results in fewer insert changes and steadier part quality, which is particularly relevant when batch sizes or component tolerances demand consistent results. The combination of a controlled coating and a cutting geometry optimised for stainless materials helps maintain tool life and process stability. System compatibility and fast, repeatable setups As an ISO rhombic DNMG150608 insert with a cylindrical hole and standard thickness, compatibility with holders is governed by the insert form, 0° clearance angle, tolerance class, fastening method, size and thickness. The standardised dimensions allow straightforward matching to commercial external holders, clamping kits and replacement screws, so set-up time is reduced and repeatability is increased. The rhombic shape and 55° cutting angle support flexible approach strategies: the geometry offers a compromise between strength and accessibility, making it suitable for a range of external and internal turning tasks in shop-floor environments. Improved surface quality and economical tool life The corner radius 0.8 mm contributes to a stable cutting edge that can deliver improved surface finish without sacrificing edge life. The insert’s double-sided chipbreaker permits indexable use of both cutting edges, effectively doubling the number of available edges per insert compared with single-sided styles and improving cost efficiency. The robust substrate and CVD coating combine to resist notch wear and maintain edge geometry, reducing scrap risk and supporting predictable tool-change intervals. Together, these features promote lower overall machining costs through extended performance and reliable part quality. Contact Metav Werkzeuge for tailored advice on holder compatibility, recommended cutting parameters and fast delivery of Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6875589-Tungaloy Manufacturer article number: 6875589 Manufacturer SKU: TUN6875589 Model series: ISO-Drehwendeschneidplatten Core technical data Size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Hole: with hole Hole style: cylindrical hole Materials & features Material: carbide Coating: CVD-coated Grade: T6215 Chipbreaker: double-sided Application: Drehen Suitable for rostfreier Stahl under stable to lightly interrupted machining conditions FAQ Is this insert suitable for machining rostfreier Stahl? The DNMG150608 T6215 turning insert from Tungaloy is designed specifically for rostfreier Stahl and performs well under stable to slightly interrupted conditions. How does the T6215 coating affect tool life? The CVD-coated T6215 grade increases surface hardness and thermal resistance, which helps the insert maintain a sharp edge and extend service life during continuous turning operations. Which holders are compatible with this ISO-format insert? Compatibility is determined by the DNMG form, thickness (6.35 mm), hole style and tolerance class; matching external holders and clamping kits for DNMG150608 geometry ensures correct fit and repeatability. How many usable edges does the insert provide? The rhombic DNMG150608 insert features a double-sided chipbreaker, offering multiple indexable edges to improve economy and reduce insert changes. What surface finish can be expected with a 0.8 mm corner radius? A corner radius 0.8 mm delivers a balance between edge strength and finish quality, suitable for medium-to-fine surface requirements in production turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T6215 Wendeplatten - Tungaloy
Benefit from a combination of wear-resistant CVD coating, predictable chip control and a compact rhombic geometry that supports stable stainless steel turning; order the DNMG150608 T6215 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150608 T6215 indexable turning insert by Tungaloy — CVD-coated carbide, 0.8 mm corner radius DNMG150608 T6215 is an ISO-format indexable insert designed for turning applications, optimised for stable and lightly interrupted machining of stainless steels CVD-coated carbide grade T6215 Optimised for stainless steel turning Double-sided chipbreaker design Rhombic DNMG geometry with 0.8 mm radius Consistent wear resistance for longer tool life The combination of a CVD coating and a wear-resistant carbide substrate in this ISO insert yields predictable performance in machining stainless steel under stable to lightly interrupted conditions. The coating reduces flank and crater wear, which improves tool life and reduces machining variability. As a consequence, production runs show fewer tool changes and more consistent surface finishes, supporting efficient cycle times and lower overall process costs. Stable chip control and secure clamping for reliable turning A double-sided chipbreaker and rhombic geometry ensure controlled chip formation and effective evacuation during external and internal turning. The insert’s cylindrical hole and standardised ISO form enable secure clamping in compatible holders; the 0.8 mm corner radius helps distribute cutting forces for better edge stability. These features translate into reduced vibration and steadier cuts, particularly useful when machining long or slender components. System compatibility that simplifies setup and replacement As a member of the ISO series of indexable inserts, the part integrates into a standard system consisting of the insert, matching external holder or boring bar, a back-up plate or clamping set, and replacement screws. The 6.35 mm thickness and standard 15 mm size allow straightforward interchangeability where DNMG inserts are specified. Predictable geometry and tolerance classes mean insert replacement is fast, keeping machine downtime to a minimum and simplifying tool inventory management. Contact Metav Werkzeuge for application advice, availability of the Tungaloy DNMG150608 T6215 insert and tailored recommendations for turning stainless steel components; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6877398 SKU: 6877398-Tungaloy Manufacturer SKU: TUN6877398 Manufacturer article number: 6877398 Data Size (inscribed circle): 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Cutting angle: 55° Free angle (relief): 0° Special features CVD-coated carbide grade T6215 Double-sided chipbreaker Rhombic DNMG geometry Cylindrical hole for secure clamping ISO-series indexable turning insert Suitable for external and internal turning of stainless steels FAQ What materials is this insert suitable for? The DNMG150608 T6215 insert is formulated for stainless steel machining and performs best under stable to lightly interrupted turning conditions. How is the insert mounted in a turning system? The insert uses a cylindrical hole and standard DNMG form; it fits ISO-compatible external holders or boring bars and requires the corresponding back-up plate/clamping set and screws. How many cutting edges are available per insert? Being a double-sided DNMG indexable insert, the component provides multiple usable edges before replacement, enabling efficient indexing and reduced tooling costs. Is the geometry suitable for finishing passes? The combination of 0.8 mm corner radius and the CVD coating supports good surface quality in finishing operations when cutting parameters are matched to the workpiece and machine rigidity. Can this insert handle interrupted cuts? The grade is optimised for stable to lightly interrupted conditions; for heavy interruptions, a different geometry or a more robust grade may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade optimised for stainless steel cutting, the ISO-standard DNMG150608 geometry with a 55° rhombic shape and a 0.8 mm corner radius, plus a double-sided chipbreaker for stable turning under interrupted conditions — combining durability, repeatable surface quality and simple tool indexing. Order the insert directly via Metav Werkzeuge or consult the team for matching holder and cutting parameters. DNMG150608 T6215 Tungaloy indexable insert — ISO rhombic turning insert for stainless steel DNMG150608 T6215 Tungaloy is an ISO-standard, rhombic indexable insert designed for external and internal turning applications where wear resistance and consistent surface finish are required. CVD-coated carbide for wear resistance Rhombic 55° geometry with 0.8 mm radius Double-sided chipbreaker for stable chip control Precision and durability for stainless-steel turning The CVD-coated T6215 grade is formulated for stainless steel machining under stable to lightly interrupted cutting conditions. The combination of a wear-resistant carbide substrate and a hard, adherent coating reduces flank and crater wear, extending tool life and ensuring more predictable insert changes. This leads to steadier production runs and fewer unscheduled tool changes, supporting higher process efficiency and consistent component quality. Geometry designed for secure clamping and reliable performance The DNMG150608 geometry features a rhombic outline with a 55° main cutting angle, 0° clearance, 6.35 mm thickness and a cylindrical hole for positive location in standard clamping systems. The 0.8 mm radius balances edge strength and surface finish, making the insert suitable for general turning and light profiling. Using ISO-standard holders that match form, relief angle, tolerance class and thickness ensures correct seating and optimal cutting forces, reducing vibration and improving repeatability. Process benefits and selection guidance Selecting the correct chipbreaker and grade is essential: the double-sided chipbreaker offers controlled chip formation for many stainless-steel applications, helping to avoid built-up edge and to improve surface finish. For higher stability or heavier cuts, pair the insert with a rigid external holder or boring bar and choose feeds and speeds that favour thermal stability. The insert’s consistent edge quality contributes to reduced rework and predictable process windows, supporting both small-batch flexibility and series production reliability. Contact Metav Werkzeuge for tailored holder recommendations or to order the Tungaloy DNMG150608 T6215 indexable insert; the Metav Werkzeuge team will advise on compatible clamping solutions and cutting data Technical data Manufacturer article number: 6944703 SKU: 6944703-Tungaloy Manufacturer SKU: TUN6944703 Brand: Tungaloy Series: ISO turning indexable inserts Insert designation: DNMG150608 ISO code: 150608 Numbers / core technical data Size: 15 mm Thickness: 6.35 mm Clearance angle: 0° Main angle: 55° Corner radius: 0.8 mm Designs / special features Material: carbide (CVD-coated) Grade: T6215 Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert suited for? The Tungaloy DNMG150608 T6215 indexable insert is optimised for stainless steel machining under stable to slightly interrupted conditions; its CVD-coated carbide composition supports wear resistance and sustained cutting performance. How does the insert geometry affect mounting and rigidity? The rhombic 55° geometry, 6.35 mm thickness and cylindrical hole ensure compatibility with standard ISO holders; these dimensions contribute to secure clamping and higher rigidity when used with correctly matched holders. Can the chipbreaker handle interrupted cuts? The double-sided chipbreaker is designed for controlled chip formation and performs well in stable to lightly interrupted cutting; selection of holder stability and cutting parameters is recommended for more severe interruptions. How many cutting edges are available per insert? The DNMG style with a double-sided chipbreaker provides indexed edges on both faces, enabling multiple repositions before replacement and supporting cost-effective tool use. Check the insert for usable edges before mounting. What is the manufacturer SKU for ordering and reference? Reference SKU: TUN6944703 or manufacturer article number 6944703 when enquiring or ordering the Tungaloy DNMG150608 T6215 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T6215 Wendeplatten - Tungaloy
High wear resistance and stable chip control combine to deliver consistent turning performance for stainless steels; ISO compatibility and a standard rhombic form simplify tool replacement and reduce setup time. Benefit from extended tool life and reliable surface quality to maintain production flow — order inserts directly via Metav Werkzeuge or consult our specialists if clarification is required. DNMG150608 T6215 Tungaloy turning insert — CVD-coated carbide, for stainless steels DNMG150608 T6215 is an ISO-standard rhombic turning insert designed for external and internal turning applications; optimised for stainless steels and manufactured for secure fit in compatible holders. CVD-coated carbide for wear resistance Optimised for stainless steels under stable conditions Double-sided chipbreaker for improved chip control Consistent fit and ISO compatibility for faster set-up The DNMG150608 follows the ISO geometry for rhombic inserts, which ensures predictable fitment regarding form, tolerance and attachment. With a 6.35 mm thickness, a 55° insert angle and a relief angle of 0°, the insert is dimensioned for stable clamping in standard holders and boring bars. The cylindrical hole enables secure retention and repeatable indexing; this translates to reduced set-up time and fewer interruptions for corrections in serial production. Longer tool life through CVD coating and grade selection The T6215 grade is a CVD-coated carbide engineered for turning rostfrei (stainless) steels under stable to lightly interrupted cutting conditions. The CVD coating forms a hard, wear-resistant surface that delays flank and crater wear, while the substrate maintains toughness. Together these properties provide reliable edge life and consistent surface finish, which can lead to fewer insert changes and lower tooling cost per part — a clear efficiency advantage in series machining. Controlled chip formation and geometry for predictable machining A double-sided chipbreaker provides repeatable chip control across a range of feeds and depths of cut, assisting in evacuation and reducing the risk of material build-up on the cutting edge. The 0.8 mm corner radius balances edge strength with the ability to achieve fine surface finishes; it is particularly useful where modest radii improve part strength without compromising dimensional accuracy. For roughing, a larger radius or different chipbreaker may be chosen, but this insert delivers a dependable compromise for many finishing and semi-finishing turning operations. Practical application advice and process reliability Designed for turning, the insert performs best when matched to an appropriate holder, correct clamping torque and stable workpiece support. Choose the T6215 grade and the double-sided chipbreaker when machining rostfreier Stahl in steady setups to exploit the grade’s wear resistance and the insert’s chip management. Customers seeking process optimisation will benefit from selecting holders and cutting parameters that sustain the stable conditions this insert is tailored for; technical consultation is available for parameter selection or compatibility checks. For supply and technical consultation on Tungaloy's T6215 DNMG inserts, contact Metav Werkzeuge — specialists can advise on holder compatibility, cutting data and suitable chipbreaker/grade combinations Technical Data Article number: 6944587 Manufacturer SKU: TUN6944587 SKU: 6944587-Tungaloy Facts Size: 15 Thickness: 6.35 mm Corner radius: 0.8 mm Relief angle: 0° Insert angle: 55° Hole style: cylindrical hole Grade: T6215 Special features CVD-coated carbide Double-sided chipbreaker ISO-standard rhombic insert Suitable for turning Optimised for stainless steels under stable conditions FAQ What materials is this insert suitable for? The DNMG150608 T6215 insert is optimised for stainless steels and performs well under stable to lightly interrupted turning conditions thanks to its CVD-coated carbide grade. How does the T6215 grade affect tool life? The T6215 CVD coating increases wear resistance and delays flank and crater wear, which extends the effective tool life compared with uncoated grades in comparable stainless-steel applications. Is the insert reversible or indexable? This ISO rhombic insert is double-sided and indexable; once one cutting edge is worn, the insert can be rotated to present a fresh edge, improving cost efficiency. What holder features are important for reliable performance? Compatible holders must match the insert’s form, free angle, tolerance class, fastening method, size and thickness; secure clamping and correct seating on the support pad are essential for repeatable results. Can this insert be used for internal turning? Yes, the geometry and cylindrical hole allow mounting in appropriate boring bars for internal turning, provided the holder matches the insert’s ISO dimensions and clearance requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of durable CVD-coated carbide, a 55° rhombic geometry and a double-sided chipbreaker for consistent, productive turning of stainless steel; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG 150608 T6215 turning insert for ISO turning applications — Tungaloy DNMG150608 T6215 is an ISO rhombic indexable insert designed for external and internal turning, optimised for stable to lightly interrupted machining of stainless steel. CVD-coated carbide for high wear resistance 55° rhombic geometry for secure cutting Double-sided chipbreaker for flexible use Extended tool life through a wear-resistant coating The T6215 grade is a CVD-coated carbide designed for enhanced wear resistance when machining stainless steel under stable or slightly interrupted conditions. The coating reduces flank and crater wear, which supports longer tool life and fewer insert changes during production. For operators seeking predictable tool consumption, the combination of coating and substrate delivers consistent edge performance and reduces unplanned downtime. Secure clamping and precise geometry for stable cuts With a 55° rhombic form and a 0° clearance angle, the insert provides a positive seating in standard ISO holders while maintaining a strong cutting edge. The cylindrical hole and defined thickness of 6.35 mm ensure reliable fastening and repeatable positioning in compatible toolholders; compatibility is determined by form, clearance, tolerance class, fastening method, size and thickness. The 0.8 mm corner radius helps balance edge strength and surface finish, reducing the risk of edge chipping during more demanding feeds. Productivity and process reliability in everyday machining The double-sided chipbreaker design allows two usable cutting edges per side, increasing the number of indexing operations before replacement. This geometry supports stable chip formation and evacuation, improving surface quality and reducing cycle times in batch production. Designed for ISO-standard turning systems, the insert integrates into productive setups with minimal adjustment, supporting a focused, economical machining strategy for component manufacturing. For tailored recommendations on integrating Tungaloy inserts into existing turning processes or to secure supply, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, application-oriented assistance. Technical data Article number: 6875537 Manufacturer SKU: TUN6875537 Our SKU: 6875537-Tungaloy Model series: ISO-turning inserts Designation: DNMG150608 Dimensions & numbers Thickness: 6.35 mm Corner radius: 0.8 mm Included angle: 55° Insert size: 15 mm Special features Material: carbide Coating / grade: T6215 (CVD) Plate form: rhombic Clearance angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO holders (form, clearance, tolerance, fastening, size, thickness) FAQ What materials is this insert suitable for? The DNMG150608 T6215 insert is developed for stainless steel and performs under stable to lightly interrupted turning conditions. How many cutting edges are available per insert? Thanks to the double-sided chipbreaker, the insert provides multiple usable edges and can be indexed several times before replacement. Which geometry determines holder compatibility? Holder compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG150608 fits ISO-standard holders matching these parameters. What benefits does the CVD coating deliver? The CVD-coated T6215 grade improves wear resistance and edge life when machining stainless steel, supporting longer tool life and consistent surface quality. Is this insert suitable for interrupted cuts? The grade and geometry are optimised for stable to slightly interrupted machining; severe interruptions may require a different grade or thicker edge preparation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T6215 Wendeplatten - Tungaloy
Die Kombination aus CVD-coated carbide (T6215) und der standardisierten ISO‑Geometrie sorgt für hohe Verschleissfestigkeit und wiederholgenaue Montage. Die rhombische Form mit 55° Schneidkantengeometrie und der zylindrische Befestigungsloch gewährleisten stabile Schneidbedingungen beim Drehen rostfreier Bauteile. Bestellungen oder technische Rückfragen über Metav Werkzeuge sind willkommen DNMG150608 T6215 indexable insert for Turning by Tungaloy — CVD-coated carbide, rhombic 55° DNMG150608 T6215 is an ISO‑standard turning insert engineered for stable to lightly interrupted turning of rostfreier Stahl and similar alloys CVD-coated carbide for wear resistance Optimised for rostfreier Stahl turning Rhombic 55° cutting geometry Double-sided insert with cylindrical hole Consistent cutting performance for rostfreier Stahl The CVD-coated carbide grade T6215 delivers elevated wear resistance and consistent flank life when machining rostfreier Stahl under stable or slightly interrupted cutting conditions. As an indexable insert, the item offers two usable cutting edges per side, reducing tool change frequency and improving uptime. The coating stabilises the cutting edge at elevated temperatures and supports predictable tool‑life, which benefits batch production and repetitive operations. Precision geometry that simplifies tool set-up The rhombic shape with a 55° main cutting angle and 0° clearance supports an economical combination of strength and access in external and internal turning. The insert features a cylindrical hole for secure clamping and dimensional repeatability; compatibility with holders depends on form, clearance angle, tolerance class, fixing method, size and thickness. This geometry reduces need for complex adjustments and helps to achieve consistent component tolerances across series production. Improved economy through longer tool life and reliable chip control A double-sided chipbreaker design contributes to stable chip formation and evacuation when paired with the right holder and cutting parameters. The robust substrate and CVD coating extend edge life, lowering tooling costs per component and cutting unplanned downtime. Where process reliability and surface finish matter, the combination of substrate, coating and chip control makes this insert a pragmatic choice for productive turning operations. System integration and recommended use This insert is part of an ISO turning plate system: select a compatible outer holder or boring bar, a suitable backing/clamping set and replacement screws to complete the assembly. Choose the chipbreaker and grade to suit workpiece material and machining stability — the T6215 grade is aimed at rostfreier Stahl in stable to slightly interrupted cuts. For mounting, check the form, tolerances and hole style on the clamping system to ensure repeatable positioning and secure fixing. For personalised advice on integrating this Tungaloy turning insert into production workflows, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for technical support and ordering information Technical Data Article number: 6944633 SKU: 6944633-Tungaloy Manufacturer SKU: TUN6944633 Model series: ISO-Drehwendeschneidplatten Designation: DNMG150608 T6215 Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Cutting angle: 55° Special features CVD-coated carbide grade T6215 Double-sided chipbreaker Rhombic plate form Cylindrical hole for clamping ISO‑standardised turning insert Intended application: Drehen, external and internal turning Suitable for rostfreier Stahl under stable to slightly interrupted conditions FAQ What materials is this insert designed for? This insert, DNMG150608 T6215, is designed primarily for machining rostfreier Stahl and materials with similar machinability characteristics. How does the T6215 coating benefit production runs? The CVD coating of the T6215 grade improves wear resistance and edge stability, which extends tool life and supports consistent results across production batches. Is the DNMG150608 compatible with standard ISO holders? Compatibility is determined by holder form, clearance angle, tolerance class, fixing method, size and thickness; the insert follows ISO standards and fits holders designed for DNMG‑type plates. How many cutting edges are available per insert? The insert is double‑sided and indexable, providing multiple usable cutting edges before replacement is required. Which chipbreaker should be chosen for finishing rostfreier Stahl? Select the chipbreaker variant that matches the machining stability and feed conditions; the double‑sided chipbreaker on this insert supports controlled chips in many turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T6215 grade for consistent wear resistance and the ISO-compliant rhombic form for straightforward holder compatibility; benefit from the double-sided chipbreaker and the insert's 55° geometry to maintain stable turning operations. Order directly via Metav Werkzeuge or consult the team for application support. DNMG150608 T6215 Tungaloy turning insert — CVD-coated carbide, for stainless steel turning The DNMG150608 T6215 Tungaloy turning insert is an ISO-format rhombic insert designed for external and internal turning of stainless steels where stable to slightly interrupted conditions prevail ISO-format rhombic insert with cylindrical hole CVD-coated carbide grade T6215 for wear resistance Double-sided chipbreaker for consistent chip control 55° geometry and 0° clearance for versatile turning Reliable wear behaviour and process stability for stainless steel turning The insert’s CVD-coated carbide formulation provides elevated surface hardness and thermal resistance, which translates into reduced flank wear during longer cuts and improved performance under the work-hardening tendencies of stainless steels. The 55° approach angle and the 0° clearance angle combine to deliver a favourable cutting force orientation that helps maintain tool stability in both external and internal turning. The small 0.8 mm corner radius balances edge strength and finish, while the 6.35 mm thickness gives mechanical rigidity for repeatable chip formation. These technical attributes lead to fewer unscheduled tool changes and a steadier cycle time in production-focused machining environments. Precise compatibility, secure clamping and efficient inventory handling Built to ISO dimensions, the insert is compatible with a wide range of ISO turning holders — compatibility depends on the holder’s form, clearance angle, tolerance class, clamping arrangement, size and thickness. The cylindrical centre hole and rhombic shape allow secure fastening and straightforward indexation: the insert is double-sided, enabling reversal for extended service life. Using standardised inserts simplifies tool management and reduces inventory complexity, since a single ISO-type insert will fit many holders with matching specifications. Clear identification by the ISO designation and the manufacturer SKU supports traceability and repeatable set-up across machines. Why the T6215 grade is a practical choice and basic machining guidance The T6215 grade is a wear-resistant, CVD-coated carbide developed for turning stainless steels under predominantly stable cutting conditions. The coating improves resistance to built-up edge and thermal abrasion, while the substrate maintains toughness. For best results, select a chipbreaker and grade matched to the workpiece, cutting mode and rigidity of the set-up; the double-sided chipbreaker promotes consistent chip segmentation and evacuation. For finishing or light roughing, the 0.8 mm radius provides a good surface aspect without sacrificing edge life. Regular inspection of the cutting edge for flank wear and prompt indexing when required will preserve component quality and extend overall tool economy. For advice on integrating the DNMG150608 T6215 insert into existing tool systems or for tailored recommendations, contact Metav Werkzeuge for application support and stock availability. Technical data Article number: 6944675 Manufacturer SKU: TUN6944675 SKU: 6944675-Tungaloy Model series: ISO turning inserts Brand: Tungaloy Numbers / core technical data Insert designation: DNMG150608 ISO code: 150608 Corner radius: 0.8 mm Thickness: 6.35 mm Inscribed circle / size: 15 mm Lead angle: 55° Clearance (relief) angle: 0° Manufacturer item number: 6944675 Designs / special features Material: carbide (CVD-coated) Grade: T6215 Chipbreaker: double-sided Shape: rhombic Centre hole: with cylindrical hole Application: turning of stainless steels; external and internal turning Indexable, reversible insert FAQ What materials is this insert intended for? The DNMG150608 T6215 Tungaloy turning insert is designed primarily for stainless steels, providing wear resistance under stable to lightly interrupted cutting conditions. Is this insert compatible with standard ISO holders? Yes; the insert follows ISO dimensions, so compatibility is determined by holder form, tolerance class, clamping method, size and thickness to ensure correct seating and relief. How does the T6215 coating improve performance? The CVD coating on the T6215 grade increases thermal and abrasion resistance, which reduces flank wear and helps control built-up edge when machining stainless steels with the DNMG150608 geometry. Can the insert be indexed to extend life? Yes; the insert is double-sided and reversible, allowing indexation to a fresh cutting edge to extend service life and reduce tooling costs per part. What are the key geometric features that affect cutting behaviour? The 55° lead angle, 0° clearance angle and 0.8 mm corner radius of this insert influence cutting forces, surface finish and edge strength; matching these to the application helps maintain process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant CVD-coated carbide, precise ISO compatibility and a double-sided chipbreaker to maintain consistent production quality and longer tool life; order the DNMG150608 T6215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150608 T6215 Tungaloy indexable insert — CVD-coated carbide, double-sided chipbreaker for turning DNMG150608 T6215 Tungaloy-Wendeplatte is an ISO-indexed turning insert designed for robust performance in external and internal turning of stainless steels CVD-coated carbide for high wear resistance ISO-standard geometry for reliable holder fit Double-sided chipbreaker for controlled chips Rhombic form with cylindrical fixing hole Optimised wear resistance for consistent machining The T6215 grade combines a CVD-coated surface with a hard carbide substrate to deliver wear-resistant performance when machining stainless steels under stable or slightly interrupted conditions. This composition extends tool life and reduces unplanned interruptions, which supports a predictable production rhythm. The coating also improves heat resistance during tougher cuts, so the result is a balance between tool longevity and surface integrity for critical turning operations. Secure clamping and ISO compatibility reduce vibration Manufactured to the ISO series, the insert’s dimensions and tolerance class ensure compatibility with standard external holders and boring bars. The fit is determined by the insert’s form, fitting geometry, tolerance class, size and thickness, so selecting the correct holder and clamping kit is essential for stable cutting. A reliable mounting reduces chatter and enables consistent dimensional control, which benefits quality assurance in serial production runs. Geometry tuned for finish and chip control The rhombic plate with a 15 mm size, 6.35 mm thickness and a 0.8 mm corner radius provides a compromise between edge strength and fine finishing. The integrated double-sided chipbreaker promotes predictable chip formation and evacuation, lowering the risk of surface damage and improving machinability of ductile, work-hardening stainless steels. This geometry supports controlled cutting conditions, delivering repeatable results and a dependable surface finish. Practical system use and process guidance The insert is supplied as part of a system: ISO-indexable insert, matched external holder or boring bar, support shim/clamping kit and spare fixing screws form the complete assembly. For best results, choose the chipbreaker and grade according to the workpiece material and the machine–workpiece stability. In practice, the combination of the 0° relief and the 55° included angle permits precise engagement and orientation in common turning set-ups, facilitating efficient changeover and straightforward indexation during tool rotation. For guidance on integrating the Tungaloy T6215 insert into production and to order through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for personalised advice and availability Technical data Article number: 6875520-Tungaloy Manufacturer item number: 6875520 SKU (manufacturer): TUN6875520 Model series: ISO-Drehwendeschneidplatten Designation: DNMG150608 Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Included angle: 55° Clearance angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Special features Grade: T6215 (CVD-coated carbide) Substrate: carbide Application: turning (external and internal) Shape: rhombic ISO-standard insert for compatible holders Recommended for stainless steels under stable to slightly interrupted conditions FAQ What materials is this insert designed for? The DNMG150608 T6215 Tungaloy insert is designed primarily for machining stainless steels and performs well under stable to lightly interrupted cutting conditions. What does the T6215 grade indicate? T6215 is a CVD-coated carbide grade engineered for wear resistance and thermal stability, making it suitable for prolonged turning operations in demanding stainless-steel applications. Which holder characteristics must be matched for correct fit? Compatibility depends on the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; selecting an ISO-compliant external holder or boring bar with the matching seat geometry ensures secure clamping for the DNMG150608 insert. How does the chipbreaker affect machining? The double-sided chipbreaker on this indexable insert promotes controlled chip formation and evacuation, which improves surface finish and reduces the risk of built-up edge when turning stainless steels. What are the key dimensions to consider when ordering replacements? Key dimensions include the 15 mm plate size, 6.35 mm thickness, 0.8 mm corner radius and 55° included angle; refer to the DNMG150608 designation and SKU 6875520-Tungaloy for exact matching. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of durable CVD-coated carbide, a rhombic 55° geometry and a double-sided chipbreaker for consistent turning performance; order or request application advice via Metav Werkzeuge for a reliable tooling solution. DNMG150608 T6215 indexable insert for turning — Tungaloy DNMG150608 T6215 is an ISO-format indexable insert designed for external and internal turning; the insert is a rhombic, double-sided cutting grade optimised for rostfreier Stahl and stable to lightly interrupted cuts. CVD-coated carbide T6215 for wear resistance Optimised for rostfreier Stahl machining Rhombic 55° geometry for versatile turning Double-sided chipbreaker for cost efficiency Consistent tool life from the CVD-coated T6215 grade The CVD-coated T6215 grade delivers a hard, wear-resistant surface that extends edge life during continuous turning of rostfreier Stahl under stable or lightly interrupted conditions. The CVD-coated layer reduces abrasive wear and maintains a sharper cutting edge for longer, which translates into fewer insert changes and more predictable tool life. This performance-oriented coating is particularly beneficial where dimensional repeatability and surface finish matter, helping to reduce downtime and rework in batch production. Geometry and mounting that suit common turning operations The rhombic 55° geometry with a corner radius 0.8 mm and a 0° clearance angle provides a balance between strength and accessibility for both external and internal profiles. The insert is supplied with a cylindrical hole and a 6.35 mm thickness, compatible with ISO-style holders when matched by form, tolerance class, fastening method, size and thickness. The double-sided chipbreaker allows the insert to be indexed once flipped, effectively doubling useful cutting edges and improving cost-per-edge economics for serial turning tasks. Practical benefits for workshop productivity and application choice As an indexable insert in the ISO series, this component simplifies logistics: standard clamping systems accept the ISO form, and the double-sided chipbreaker plus robust carbide substrate support steady machining parameters and consistent surface quality. For customers needing guidance on selecting the correct chipbreaker or matching the grade to machine stability, Metav Werkzeuge offers technical advice and application data to determine whether the insert suits heavy roughing, finishing passes or medium-duty profile turning. The predictable wear behaviour contributes to process reliability and efficient material removal rates. Contact Metav Werkzeuge for tailored application advice on Tungaloy inserts and to request a formal quotation or compatibility check via email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6944657 Manufacturer SKU: TUN6944657 SKU: 6944657-Tungaloy Material: Hartmetall Series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Included angle: 55° Clearance angle: 0° Thickness: 6.35 mm Size: 15 Special features CVD-coated carbide (T6215) Suited for rostfreier Stahl machining Rhombic plate form With cylindrical hole Double-sided chipbreaker ISO-format indexable insert Compatible with matching holders by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert designed for? The DNMG150608 T6215 indexable insert by Tungaloy is optimised for rostfreier Stahl and performs well in stable to lightly interrupted turning conditions. Can the insert be used for both external and internal turning? Yes. The rhombic 55° geometry and 0° clearance angle make the insert suitable for a wide range of external and internal turning applications. How does the T6215 coating benefit production? The CVD-coated T6215 grade increases wear resistance and edge stability, which leads to longer tool life and more consistent surface quality during series machining with the DNMG150608 insert. Is this insert reversible or single-use per edge? The insert features a double-sided chipbreaker, allowing indexing to the second side and effectively providing multiple usable cutting edges for improved economy. Which holder features must be checked before ordering? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; verify these parameters against the DNMG150608 dimensions and hole style. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, precise corner radius 0.8 mm, and ISO compatibility for steady production when turning rostfreier Stahl; order directly via Metav Werkzeuge or contact our consultants for application advice. DNMG150608 T6215 indexable insert — ISO rhombic turning insert by Tungaloy, CVD-coated carbide for rostfreier Stahl The DNMG150608 T6215 is an ISO rhombic indexable insert designed for external and internal turning, offering stable chip control and long tool life in the machining of rostfreier Stahl. CVD-coated carbide grade T6215 Optimised for rostfreier Stahl turning Double-sided chipbreaker for consistent chips 0° relief angle and rhombic geometry for versatility Consistent wear performance for rostfreier Stahl turning The insert is manufactured from carbide with a CVD coating and the proven T6215 grade, which combines abrasion resistance with flank-edge stability. This results in predictable tool life under stable to slightly interrupted cuts, reducing unplanned tool changes. The corner radius 0.8 mm improves edge strength and part finish while limiting cutting forces; the benefit is fewer process disturbances and more reliable cycle times in serial production of rostfreier Stahl components. Geometry and mounting that ensure repeatable accuracy Designed as an ISO-standard rhombic plate, the insert’s rhombic shape and 6.35 mm thickness provide a stable seating in compatible holders. The insert is supplied with a cylindrical hole and is clamped according to form, tolerance class, size and thickness, so compatibility with existing toolholding systems is straightforward. The 0° relief angle and the ISO designation derived from the size coding promote repeatable positioning and minimise set-up variation, helping maintain tight dimensional tolerances on turned parts. Chip control and process efficiency for production environments Equipped with a double-sided chipbreaker, the insert secures reliable chip formation across a range of cutting parameters. This chip control reduces downtime related to chip disposal and enhances surface quality on the workpiece. In combination with the CVD-coated carbide substrate, the insert provides an efficient balance of cutting speed and wear resistance, which can contribute to lower unit costs and higher throughput on rostfreier Stahl turning operations. Practical guidance for integration and workholding As part of a system — ISO indexable insert, matching external holder or boring bar, backing pad/clamping set and replacement screws — the plate integrates into standard turning setups. The ISO sizing (150608) and the rhombic geometry offer flexibility for both external and internal turning tasks. Selection of a suitable chipbreaker and grade should be based on the material condition, cutting strategy and machine stability to secure the best combination of surface finish and tool life. Contact Metav Werkzeuge for tailored application guidance or to request technical details and availability of the DNMG150608 T6215 insert, quoting SKU 6944602-Tungaloy when enquiring Technical data Article number: 6944602 SKU: 6944602-Tungaloy ISO designation: DNMG150608 Manufacturer: Tungaloy Facts Thickness: 6.35 mm Insert size: 15 mm Corner radius: 0.8 mm Relief angle: 0° Included hole: with cylindrical hole Insert angle: 55° Special features Material: carbide Coating: CVD-coated carbide (T6215) Chipbreaker: double-sided Shape: rhombic Application: Turning (external and internal) Typical use: rostfreier Stahl machining under stable to slightly interrupted conditions FAQ What applications is this insert suitable for? The DNMG150608 T6215 insert is intended for external and internal turning and is particularly suited to machining rostfreier Stahl under stable to slightly interrupted cutting conditions. Which material is the insert made from and what is the coating? The insert is made from carbide and features a CVD coating in the T6215 grade to improve wear resistance and edge stability. How does the chipbreaker design affect machining? The double-sided chipbreaker on the insert promotes consistent chip formation and reduces the risk of long, tangled chips, improving process security and surface finish during turning operations. What are the key dimensions and mounting details? Key dimensions include a 15 mm size, 6.35 mm thickness, corner radius 0.8 mm, and a cylindrical hole for clamping; the insert follows the ISO DNMG150608 geometry for compatible holders. Is this insert reversible or single-use per edge? The insert is double-sided, allowing use of multiple cutting edges before replacement, which contributes to extended tool life and cost efficiency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com