DNMG 150608 AH8015 Wendeplatten - Tungaloy
Combine the balanced wear resistance of the AH8015 grade with the ISO DNMG geometry and a 0.8 mm corner radius for consistent turning performance and longer tool life. Order the DNMG 150608 AH8015 insert via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG 150608 AH8015 turning insert (Tungaloy) — PVD-coated carbide, rhombic 55° DNMG 150608 AH8015 is a precision indexable insert for general turning, designed for external and internal operations in demanding materials. PVD-coated carbide grade AH8015 ISO DNMG 150608 rhombic 55° Double-sided chipbreaker, cylindrical hole 0.8 mm corner radius, 6.35 mm thickness Consistent cutting performance for general turning tasks The PVD-coated carbide composition of this insert and the AH8015 grade deliver a reliable balance between wear resistance and edge stability for continuous operation. The ISO DNMG geometry with a 55° point angle offers secure clamping and predictable cutting forces, which helps to stabilise cycles on lathes and automatic turning centres. Where process stability and repeatable surface finish matter, this geometry minimises vibration and supports steady material removal rates. Compatibility and practical selection for toolholders Compatibility depends on form, clearance, tolerance class, fastening and size; the rhombic indexable insert and its 0° clearance must match the chosen holder. The insert’s cylindrical hole and standard ISO dimensions ensure straightforward replacement and interchangeability across compliant holders. Selecting the correct chipbreaker and grade for the workpiece and machining stability is crucial: the double-sided chipbreaker supports efficient chip control while allowing both sides of the insert to be used before indexing. Productivity improvements and reduced tooling costs A grade engineered for general work on heat-resistant alloys and similar materials reduces downtime through longer intervals between indexings. The PVD coating contributes to improved abrasion resistance and thermal stability at cutting edges, translating into extended service life and fewer tool changes. With the insert’s geometry and 0.8 mm corner radius, operators gain a durable cutting edge that maintains part tolerances with less frequent intervention, supporting shorter cycle times and predictable production output. Material range and recommended applications This insert is particularly well suited to the machining of heat-resistant alloys, where a compromise between toughness and hardness is required. It performs reliably in both external and internal turning operations and is a pragmatic choice for workshops seeking a versatile solution for mixed production runs. The combination of 6.35 mm thickness and the ISO DNMG format makes the insert robust under varying clamping conditions while remaining easy to index and replace. Contact Metav Werkzeuge today for technical matching or to request a cutting test on your component; phone +49 2822 7131930 or email info@metav-werkzeuge.com – expert guidance for optimal insert selection is available Technical data Article number: 6936101 SKU: 6936101-Tungaloy Manufacturer SKU: TUN6936101 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: AH8015 Application: Turning Core specifications ISO designation: 150608 Form: DNMG (rhombic) Size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Insert angle: 55° Materials & special features PVD-coated carbide Double-sided chipbreaker Cylindrical hole Rhombic insert form ISO-compliant turning insert Suitable for heat-resistant alloys, external and internal turning FAQ What workpieces is the DNMG150608 AH8015 insert best suited to? The DNMG150608 AH8015 insert is optimised for general machining of heat-resistant alloys and similar materials, offering a balanced combination of wear resistance and edge stability. Is this insert compatible with standard DNMG holders? Yes. The ISO DNMG150608 format, cylindrical hole and standard thickness ensure compatibility with holders designed for DNMG inserts, provided the holder matches form, clearance and tolerance specifications. Can both sides of the insert be used? The insert features a double-sided chipbreaker, so the DNMG150608 AH8015 can be indexed and reused on both sides to extend service life. What advantage does the PVD coating provide? The PVD coating on the AH8015 grade improves abrasion resistance and thermal stability at the cutting edge, supporting longer tool life and more consistent surface finishes. What is the corner radius and why does it matter? The corner radius is 0.8 mm; this radius enhances edge robustness and helps to maintain dimensional accuracy during turning, especially under moderate depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8015 Wendeplatten - Tungaloy
The combination of PVD‑coated carbide grade AH8015, a rhombic 55° geometry and a double‑sided chipbreaker delivers consistent edge life and reliable chip control for demanding turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for application support. DNMG150608 AH8015 ISO turning insert for Drehen, PVD‑coated carbide by Tungaloy DNMG150608 AH8015 ISO‑standard turning insert for general turning of heat‑resistant alloys and similar materials PVD‑coated carbide for heat‑resistant alloys Double‑sided chipbreaker for flexible use Rhombic ISO insert, 55° cutting geometry 0.8 mm corner radius for consistent edge formation Central hole, cylindrical style, 6.35 mm thickness Consistent wear resistance for high‑temperature alloy turning The PVD‑coated carbide grade AH8015 is formulated to balance wear resistance and edge stability, making it suitable as a first choice for machining heat‑resistant alloys. The coating improves resistance to adhesive wear and thermal softening during interrupted cuts, which translates into longer tool life and fewer insert changes. For production environments where cycle time and uptime matter, this grade supports steady performance without sacrificing surface integrity. Improved chip control and process flexibility from geometry The combination of rhombic geometry and a double‑sided chipbreaker provides dependable chip formation across varying cutting conditions. The insert’s 55° cutting angle and 0.8 mm corner radius help maintain stable cutting forces and contribute to a uniform cutting edge, improving repeatability. The central cylindrical hole and standard clamping dimensions ensure compatibility with a wide range of ISO‑type external holders and boring bars, while the double‑sided design offers economical indexability for extended service life. Better surface finish and predictable productivity Using an insert optimised for turning yields measurable benefits in surface quality and process efficiency. The stable edge and controlled chip evacuation reduce the likelihood of built‑up edge and surface irregularities, supporting consistent part quality over batches. In practical terms, the insert reduces unplanned tool interventions and supports a predictable machining rhythm, which is particularly valuable in small‑batch and mixed‑series production where setup time and consistency are critical. System compatibility and selection guidance The ISO‑format insert is intended for assembly as part of a system: matching a suitable external holder or boring bar, backing pad or clamping set, and replacement screws ensures correct seat and clamping torque. Compatibility depends on the insert shape, clearance angle, tolerance class, mounting method, size (15 mm inscribed circle) and plate thickness (6.35 mm). When choosing a chipbreaker and grade, align the selection with material type, machining strategy and machine stability to achieve the desired balance between material removal rate and surface finish. For specific material pairings and recommended cutting parameters, the technical advisors at Metav Werkzeuge can provide tailored data. For application advice, availability of DNMG150608 AH8015 inserts and tailored recommendations from Tungaloy, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge offers rapid delivery and expert consultation for turning applications Technical Data Article number: 6947236 Manufacturer SKU: TUN6947236 Model series: ISO turning insert series Material: carbide Facts Inscribed circle: 15 mm Corner radius: 0.8 mm Plate thickness: 6.35 mm Cutting angle: 55° ISO code: 150608 Special features Grade: AH8015 (PVD‑coated carbide) Chipbreaker: double‑sided Plate shape: rhombic Hole: central, cylindrical style Typical use: external and internal turning FAQ What materials is this insert best suited for? This DNMG150608 AH8015 insert is optimised for heat‑resistant alloys and similar materials; the AH8015 grade balances wear resistance and edge stability for such applications. Is the insert indexable on both sides? Yes, the double‑sided chipbreaker and rhombic form allow indexable use on both sides to extend service life. Which holder types are compatible with this ISO insert? Compatibility requires a holder or boring bar matched to the DNMG shape, 55° geometry, clamping method and plate thickness; confirm the holder seat and tolerance class for correct fit. What is the corner radius and how does it affect machining? The insert has a 0.8 mm corner radius, which supports robust edge formation and contributes to improved surface finish and cutting force stability. Does the insert include mounting screws or clamping accessories? The insert is supplied as a cutting plate; holders, clamping sets and replacement screws are part of the overall system and should be selected separately to match the insert dimensions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8015 Wendeplatten - Tungaloy
Take advantage of a PVD-coated AH8015 carbide grade and the ISO 55° rhombic geometry to achieve stable cutting and consistent surface quality in turning operations; ideal for machining heat-resistant alloys while keeping tool changes to a minimum. Order this insert directly via Metav Werkzeuge or consult our specialists for compatible holders and clamping sets. DNMG150608 AH8015 Tungaloy — ISO rhombic indexable turning insert, PVD-coated carbide, 55° DNMG150608 AH8015 Tungaloy is an ISO‑specified indexable turning insert for external and internal turning, offering a balanced combination of wear resistance and edge stability for heat‑resistant alloys PVD-coated carbide AH8015 55° rhombic insert with cylindrical hole Corner radius 0.8 mm for fine finishing Double-sided chipbreaker, ISO form Reliable cutting performance for heat‑resistant alloys The PVD‑coated carbide grade AH8015 is engineered as a first choice for the general machining of heat‑resistant alloys, delivering a compromise between wear resistance and edge stability. This balance reduces the frequency of tool changes while maintaining consistent part quality, so production runs remain efficient. The coating enhances temperature tolerance at the cutting edge, which helps to delay flank wear under elevated cutting temperatures commonly encountered when turning nickel‑based and high‑temperature steels. Predictable geometry for consistent surface quality A 55° rhombic geometry with a corner radius of 0.8 mm provides a stable cutting edge and predictable engagement with the workpiece. The rhombic form and the cylindrical mounting hole ensure repeatable seating and concentricity when paired with compatible holders, which supports uniform surface finish and dimensional control. The double‑sided chipbreaker design promotes controlled chip formation, reducing the likelihood of entanglement and improving cycle reliability in both external and internal turning. System compatibility and ease of selection Designed as an ISO indexable insert, the plate integrates into standard turning systems; compatibility with a given holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. Selecting the appropriate chipbreaker and grade is essential: the AH8015 grade suits general applications in heat‑resistant alloys, while the chipbreaker choice should match the material, cutting mode and machine stability to optimise productivity and tool life. Assistance with holder matching and clamping sets is available to ensure the insert performs as intended in the chosen system. Handling, clamping and practical benefits The plate’s 6.35 mm thickness and the rhombic 15 mm size combine to provide a robust seat and simple handling during index changes. The double‑sided nature doubles usable edge life per insert, improving cost‑efficiency for batch production. Because the grade is engineered for balanced performance rather than extreme specialisation, the insert is suitable for shops that require reliable, repeatable results across a range of turning tasks. Proper tightening of the clamp and the use of the specified screw type preserve the seat integrity and the dimensional accuracy of every cut. For robust, productive turning with Tungaloy quality, contact Metav Werkzeuge to order the DNMG150608 AH8015 insert or to request advice on holder compatibility and application‑specific setup — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947123 Manufacturer SKU: TUN6947123 Model series: ISO turning indexable inserts Label: DNMG150608 AH8015 Tungaloy indexable insert Material: carbide Grade/coating: AH8015, PVD-coated Core data ISO designation: 150608 Insert form: DNMG (rhombic, 55°) Size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Angle: 55° Special features Mounting: with cylindrical hole Chipbreaker: double-sided Typical application: turning (external and internal) System components: insert, compatible external holder or boring bar, shim/clamping set and spare screws FAQ Which materials is this insert best suited for? The DNMG150608 AH8015 insert is optimised for heat‑resistant alloys and general alloy machining, offering a balanced combination of wear resistance and edge stability suited to such materials. Is the insert reversible or single‑use? This indexable plate is double‑sided, providing two usable cutting edges per side where applicable, which extends usable life before replacement. How is compatibility with holders ensured? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG150608 conforms to ISO dimensions to fit standard holders designed for DNMG inserts. Does the insert include a chipbreaker and what is its function? Yes, the insert features a double‑sided chipbreaker that promotes controlled chip formation, improving surface finish and reducing the risk of chip control issues during turning. What geometric features affect surface finish? The 55° rhombic geometry combined with a 0.8 mm corner radius supports a predictable cutting action and fine finishing characteristics when the chipbreaker and cutting parameters are correctly matched. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8015, a DNMG150608 ISO form and a double-sided chipbreaker to achieve stable cutting in heat-resistant alloys; order directly via Metav Werkzeuge or contact our consultants for application advice. DNMG 150608 AH8015 Turning Insert – ISO-compatibility for general turning, Tungaloy DNMG 150608 AH8015 is a rhombic, ISO‑standard turning insert designed for reliable external and internal turning in demanding materials; compatible with ISO holders where form, clearance, tolerance class, fastening and thickness match. PVD-coated carbide AH8015 for heat-resistant alloys ISO DNMG 150608 rhombic geometry Double-sided chipbreaker for stable cuts Cylindrical clamping hole, 0° clearance angle Consistent performance for demanding turning operations The rhombic DNMG150608 insert offers a balanced combination of wear resistance and edge stability thanks to the PVD-coated carbide AH8015 grade. This combination is especially effective when machining heat-resistant alloys where thermal loads are high; the coating helps to reduce flank wear and extend tool life, while the substrate maintains edge strength under intermittent cutting. The result is a more predictable process and fewer insert changes, which supports continuous production and lowers overall machining costs. Secure clamping and optimised geometry for repeatable results The insert’s cylindrical hole and standard ISO form ensure secure fastening in compatible holders. The 0° clearance angle and 0.8 mm corner radius provide a compromise between robustness and surface finish: larger radii enhance edge strength for heavy cuts, while the moderate radius still allows acceptable component geometry. Using correctly matched holders and torque settings reduces vibration and improves surface integrity, making the system suitable for both roughing and light finishing when required. Balanced grade for general-purpose turning of heat-resistant materials The AH8015 carbide grade is engineered as a first choice for general machining of temperature-resistant alloys, offering an even mix of longevity and cutting-edge stability. Compared with more specialised grades, this insert provides broad material coverage without demanding frequent tool changes. For practical selection, pair the insert’s chipbreaker style with the workpiece material and machining stability to achieve consistent chip control and avoid built-up edge in less stable set-ups. Practical selection advice and compatibility notes As an ISO‑standard insert, the component forms part of a system consisting of the ISO turning insert, a matching external holder or boring bar, seat/locking kit and replacement screws. Compatibility is determined by insert shape, clearance angle, tolerance class, fastening method, overall length/size and thickness (6.35 mm). If clarification is required on holder fitment or cutting data, sample component drawings and cutting conditions should be compared to the insert specifications to ensure correct pairing. For application guidance or to order Tungaloy AH8015 inserts for turning operations, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or call +49 2822 7131930; our consultants will advise on holder compatibility and cutting data. Technical data Article number: 6741668 Manufacturer SKU: TUN6741668 SKU: 6741668-Tungaloy Core dimensions Insert size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Included angle: 55° Clearance angle: 0° Special features Material: carbide Coating: PVD-coated (AH8015) Shape: rhombic (DNMG) Hole: cylindrical, with hole Chipbreaker: double-sided Series: ISO turning insert series Typical application: external and internal turning, general-purpose machining of heat-resistant alloys FAQ What materials is this insert best suited for? The DNMG 150608 AH8015 turning insert (Tungaloy, SKU 6741668-Tungaloy) is optimised for machining heat-resistant alloys and provides broad material coverage for general turning tasks. How does the AH8015 coating influence tool life? The PVD-coated AH8015 grade improves wear resistance and helps maintain edge stability under thermal stress, resulting in longer runtimes compared with uncoated substrates in similar conditions. Can this insert be used for both roughing and finishing? Yes; the double-sided chipbreaker and 0.8 mm corner radius make the insert suitable for stable roughing and for light finishing when set-up rigidity and cutting parameters are adapted. Which holders are compatible with this DNMG insert? Compatibility depends on ISO form, clearance angle, tolerance class, fastening and thickness. Use holders designed for DNMG 150608 inserts and confirm seating dimensions against the insert specification. Is the insert reversible or indexable? The insert is double-sided with a chipbreaker on both faces, enabling indexable use; rotation to a fresh cutting edge is possible within the prescribed holder and clamping specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH8015 grade and the rhombic DNMG 55° geometry for reliable turning of heat-resistant alloys; the double-sided chipbreaker and cylindrical-hole design ensure stable clamping and predictable chip formation. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG 150608 AH8015 indexable turning insert (ISO 150608) – Tungaloy A DNMG150608 AH8015 indexable insert for versatile external and internal turning, designed for balanced wear resistance and cutting-edge stability in heat‑resistant alloy machining PVD-coated carbide AH8015 grade Rhombic DNMG 55° geometry Double-sided chipbreaker design Cylindrical hole, 6.35 mm thickness Increased productivity through balanced edge life The PVD‑coated AH8015 grade combines wear resistance with edge stability, making it suitable as a first choice for general machining of heat‑resistant alloys. The coating reduces flank wear and helps maintain dimensional consistency across tool life, which translates into fewer interruptions and improved process uptime. As a result, cycle times are stabilised and the overall cost per part is reduced without sacrificing surface quality. Reliable chip control and stable cutting behaviour The double-sided chipbreaker layout together with the rhombic 55° geometry provides consistent chip formation when facing or turning internal and external profiles. The insert’s cylindrical hole and precise thickness support secure clamping in compatible holders, reducing the risk of vibration and edge chipping. This combination promotes cleaner chips and steadier cutting forces, which is particularly beneficial when working with difficult-to-machine, heat‑resistant alloys. Simple integration into ISO-based tool systems Being part of the ISO turning insert family, the geometry, relief angle, tolerance class, fastening and plate thickness determine holder compatibility; these parameters are standardised so the insert can be matched reliably to appropriate toolholders and boring bars. The system build typically includes the insert, a matching external holder or boring bar, a shim or clamp set and replacement screws. Clear specification of form, free angle and size facilitates correct selection and swift tool changes on the shop floor. Guidance for material selection and operational use Choose the AH8015 variant where a balance between longevity and cutting-edge robustness is required, especially when machining alloys that generate elevated temperatures. The rhombic DNMG form is a versatile geometry for general turning tasks; pairing the insert with the correct chipbreaker and ensuring rigid setup will deliver reproducible surface finishes and extended edge life. Where specific process windows are needed, refer to holder compatibility and the ISO series details to select the matching assembly. For application support on Tungaloy AH8015 inserts or tailored recommendations from Metav Werkzeuge, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947094 Manufacturer SKU: TUN6947094 SKU: 6947094-Tungaloy Model series: ISO-Drehwendeschneidplatten Core data Geometry designation: DNMG150608 ISO code: 150608 Grade: AH8015 Thickness: 6.35 mm Size: 15 mm Corner radius: 0.8 mm Relief (rake) angle: 0° Lead/insert angle: 55° Hole style: cylindrical hole Features & materials Material: cemented carbide (PVD-coated) Coating type: PVD Chipbreaker: double-sided Plate form: rhombic Typical application: turning (external and internal) System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The AH8015 grade is formulated for machining heat‑resistant alloys and offers a balanced compromise between wear resistance and cutting edge robustness when used with the DNMG150608 geometry. How does the DNMG 55° geometry affect cutting performance? The rhombic 55° lead provides versatility for both external and internal turning; it offers stable contact conditions and good edge strength for general machining tasks. Is the insert reversible or single-use? The insert features a double-sided chipbreaker design, which allows reversible use to present a fresh cutting edge after indexing, improving overall tool economy. Which holders are compatible with this indexable insert? Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; the DNMG150608 conforms to ISO standards to ease matching with standard external holders and boring bars. What information is needed to ensure correct clamping and setup? Provide the geometry (DNMG150608), plate thickness (6.35 mm), hole style (cylindrical) and the insert grade (AH8015) when selecting the corresponding holder, shim and fastening screws to ensure secure clamping and optimal performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide and a precise 0.8 mm corner radius for stable cutting performance in demanding turning operations. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice and matching holders. DNMG 150608 AH8015 indexable turning insert for ISO turning, rhombic 55° The DNMG150608 AH8015 is an ISO-format rhombic indexable insert designed for general turning of heat‑resistant alloys and similar demanding materials. ISO rhombic format for versatile turning PVD-coated carbide AH8015 for heat-resistant alloys 0.8 mm corner radius for predictable edge strength Cylindrical hole and double-sided chipbreaker Reliable cutting performance for demanding alloys The insert combines a PVD-coated surface with a carbide substrate to provide a balance between wear resistance and edge stability that benefits long production runs. The AH8015 grade is optimised for machining heat‑resistant alloys, delivering consistent tool life where conventional grades wear prematurely. The coating reduces built-up edge and improves thermal management during cutting, which leads to fewer interruptions and a steadier surface finish. Consistent geometry reduces setup time and rejects With an ISO rhombic form and a defined 55° lead angle, the insert simplifies toolholder selection and process standardisation across lathes. The 0.8 mm radius gives a compromise between edge strength and achievable surface finish, making the component suited to both roughing and light finishing passes. The standardised dimensions and a cylindrical hole ensure repeatable clamping and simple indexing, reducing setup time and scrap rates. Practical advantages in workshop workflows The insert is double-sided with a dedicated chipbreaker geometry matched to general turning tasks, enabling cost-effective indexing and predictable wear progression. Compatibility with a wide range of holders is determined by form, free angle, tolerance class, fixing method, size and thickness, allowing integration into existing tool inventories without major changes. This practicality supports continuous production and reduces tool change frequency. Material guidance and application notes Designed primarily for turning, the grade performs well on heat‑resistant alloys and similar difficult‑to‑cut materials due to its balanced hardness and edge stability. Selecting the appropriate chipbreaker and matching the holder stability to the part geometry will maximise the insert's lifetime and surface quality. For applications requiring higher feed or interrupted cuts, choose a robust clamping system and consider modest depth‑of‑cut increases to leverage the insert's wear resistance. Contact Metav Werkzeuge for tailored advice on Tungaloy inserts and holder pairings, or to arrange fast delivery and technical support from our specialists via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6792605-Tungaloy Manufacturer SKU: TUN6792605 Model series: ISO-Drehwendeschneidplatten Material: carbide Grade / coating: AH8015 (PVD-coated) Numbers / Core technical data Size: 15 mm Thickness: 6.35 mm Angle: 55° Corner radius: 0.8 mm Free angle: 0° Manufacturer article number: 6792605 Designs / Special features Rhombic insert, ISO DNMG format Double-sided chipbreaker Cylindrical hole Suitable for turning of heat‑resistant alloys Indexable insert for use with compatible holders FAQ What materials is this insert intended for? The DNMG150608 AH8015 insert is intended primarily for the machining of heat‑resistant alloys and comparable materials; the AH8015 grade provides a balanced combination of wear resistance and edge stability for these applications. How does the AH8015 grade affect tool life? The AH8015 PVD‑coated carbide offers improved wear resistance compared with uncoated grades, resulting in a longer and more predictable service life for the Tungaloy indexable insert under appropriate cutting conditions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, free angle, tolerance class, fixing method, size and thickness; the ISO rhombic geometry and the cylindrical hole allow the DNMG150608 insert to be mounted in a wide range of standard turning holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8015 Wendeplatten - Tungaloy
Benefit from the proven combination of a PVD‑coated carbide AH8015 grade and a double‑sided chipbreaker to achieve stable cutting and consistent tool life when machining heat‑resistant alloys; compatibility with ISO holders ensures straightforward integration. Order the DNMG150608 AH8015 turning insert directly via Metav Werkzeuge or consult our technical team for assistance. DNMG 150608 AH8015 — Indexable turning insert for turning, Tungaloy The DNMG150608 AH8015 is an ISO‑standard indexable insert designed for external and internal turning, offering a rhombic 55° geometry and robust PVD‑coated carbide for reliable performance in demanding alloy machining. ISO‑standard DNMG150608 geometry PVD-coated carbide grade AH8015 Double-sided chipbreaker for stability 0° clearance and 55° rhombic shape Consistent performance for heat‑resistant alloys The PVD‑coated carbide grade AH8015 provides a balanced combination of wear resistance and cutting‑edge stability, making this insert a first choice for general machining of heat‑resistant alloys. The coating improves thermal and abrasive resistance, which in turn supports longer tool life and fewer index changes. With a 0.8 mm corner radius and a rhombic 55° form, the geometry is tailored to deliver predictable chip formation and a repeatable surface finish while maintaining strength at the cutting edge. Designed for system compatibility and ease of use Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the insert is supplied in the ISO‑standard DNMG format to match common external holders and boring bars. The plate is double‑sided with a cylindrical hole for secure clamping, and a plate thickness of 6.35 mm ensures stable seating under medium to heavy cutting forces. The indexable design allows the insert to be rotated or flipped to a fresh edge, reducing downtime and lowering tooling costs per part when used in a complete system with appropriate shims and clamping sets. Practical guidance for selection and productivity Select the chipbreaker style and grade to suit the workpiece material, machining type and machine stability for optimal results; the double‑sided chipbreaker on this insert supports controlled chips and contributes to consistent cycle times. The ISO‑compliant format facilitates straightforward tool inventory management and quick replacements. When paired with suitable holders and correct cutting data, the insert enables efficient, productive turning operations and helps to maintain surface quality across production runs. Order genuine Tungaloy DNMG150608 AH8015 inserts via Metav Werkzeuge for dependable turning of heat‑resistant alloys — Metav Werkzeuge provides technical advice and product availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6947214 SKU: 6947214-Tungaloy Manufacturer SKU: TUN6947214 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Key measurements Plate size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Diamond angle: 55° Clearance angle: 0° Design and material Shape: rhombic Chipbreaker: double-sided Coating: PVD-coated Material: carbide Grade: AH8015 Hole: with cylindrical hole ISO designation: DNMG150608 Application: Turning FAQ What materials is this insert best suited for? The DNMG150608 AH8015 insert is specified for the general machining of heat‑resistant alloys, offering a balanced wear resistance and edge stability due to its PVD‑coated carbide construction. How does the double‑sided chipbreaker affect tool life? A double‑sided chipbreaker doubles the number of usable edges per insert and promotes controlled chip formation, which together reduce tooling costs and extend useful life between index operations. Is the insert compatible with standard ISO holders? Yes, the DNMG150608 format is ISO‑standardised; compatibility with a holder is determined by form, clearance angle, tolerance class, fastening, size and thickness, so matching those parameters ensures correct fitment. What advantages does the AH8015 grade provide? The AH8015 grade provides an even balance between wear resistance and edge stability, making it suitable as a first‑choice grade for turning applications involving heat‑resistant alloys. Which clamping components are needed for correct assembly? A matching external holder or boring bar, a suitable shim/clamping set and the specified replacement screws are required to assemble the ISO insert into a secure, production‑ready tool system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide performance, reliable chip control, and ISO compatibility to keep turning processes consistent and productive; order original Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150608 AH8015 — ISO turning insert for turning, Tungaloy DNMG150608 AH8015 is an ISO-standard rhombic turning insert in PVD-coated carbide, designed for general turning of heat-resistant alloys and productive, repeatable metalcutting. PVD-coated carbide grade AH8015 Optimised for heat‑resistant alloys Rhombic DNMG 15 mm, 0.8 mm corner radius Double-sided chipbreaker, with cylindrical hole Greater productivity through balanced wear resistance and edge stability The combination of a PVD-coated surface and a high-performance carbide substrate provides a reliable compromise between wear resistance and cutting-edge robustness. This balance reduces flank wear during continuous turning of demanding materials, extending the tool life and lowering the frequency of index changes. For manufacturers seeking a measurable improvement in uptime, the insert’s specification targets efficient removal rates while maintaining consistent surface quality, resulting in fewer interruptions and better overall plant utilisation. Consistent clamping and geometry for predictable machining results As an ISO-standard rhombic insert, the DNMG150608 features a 15 mm size, 6.35 mm thickness, a 0.8 mm corner radius, and a 55° included angle, combined with a 0° clearance angle and a cylindrical hole for secure fixing. These defined dimensions make holder compatibility straightforward: selection depends on form, clearance angle, tolerance class, fastening method, size and thickness. Clear geometry simplifies process setup and reduces variation, helping maintain repeatable component tolerances and consistent cycle times in serial production. Better process control and easier shop-floor handling The double-sided chipbreaker design improves chip control during both roughing and finishing operations, reducing the risk of entanglement and machine downtime. The PVD surface also decreases the tendency for built-up edge on heat-resistant alloys, supporting a stable cutting edge and improved surface finish. As an indexable insert, it provides quick replacement and predictable performance across shifts, which supports lean practices and reduces operator stress when compared with non-indexable solutions. For tailored cutting data, compatibility checks or to source genuine Tungaloy turning inserts, contact Metav Werkzeuge for rapid supply and expert application support via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6776091 Manufacturer SKU: TUN6776091 SKU: 6776091-Tungaloy Brand: Tungaloy Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Included angle: 55° Clearance angle: 0° Hole style: cylindrical Special features Carbide substrate, PVD-coated (AH8015) ISO turning insert, rhombic plate Double-sided chipbreaker With hole for secure clamping Model series: ISO turning indexable inserts Application: Turning of heat-resistant alloys FAQ What materials is this insert suited for? The DNMG150608 AH8015 insert from Tungaloy is optimised for turning heat-resistant alloys, offering a balance of wear resistance and edge stability for these demanding materials. How does the chipbreaker influence machining? The double-sided chipbreaker on this indexable insert improves chip control, which minimises interruptions and supports safer, more continuous machining cycles. Which holders are compatible with this ISO insert? Compatibility is determined by the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG150608 conforms to ISO dimensions to ease selection of matching external holders or boring bars. How many cutting edges are available per insert? As a double-sided DNMG-style insert, multiple indexing positions are available before the insert requires replacement, allowing economical use of each plate in serial production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8015 Wendeplatten - Tungaloy
High-performance ISO indexable insert with balanced wear resistance and edge stability; PVD-coated carbide AH8015 and a 0.8 mm corner radius combine for reliable turning of heat-resistant alloys. Order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and machining advice. DNMG150608 AH8015 indexable turning insert — Tungaloy A DNMG150608 AH8015 indexable insert designed for ISO-standard external and internal turning, offering robust edge stability for heat-resistant alloys. ISO DNMG150608 rhombic insert PVD-coated carbide AH8015 grade Double-sided chipbreaker for stable chips 0° clearance with 55° lead angle Consistent metal removal with balanced edge life The PVD-coated carbide AH8015 grade delivers a compromise between wear resistance and cutting-edge stability, making the insert a practical choice for continuous production runs where predictable tool life matters. The PVD layer reduces adhesive wear at elevated temperatures, which stabilises cutting performance on heat-resistant alloys and similar materials. Because the geometry is ISO-standardised, the insert supports reproducible setup and repeatable results across compatible toolholders, helping to reduce setup time and unplanned interruptions in the machining cycle. Secure clamping and ISO compatibility reduce setup risk The rhombic DNMG150608 form, cylindrical hole and specified thickness ensure mechanical stability when mounted in an ISO-compatible holder. Compatibility depends on the holder’s form, relief angle, tolerance class, clamping method, size and thickness; matching these parameters prevents seating errors and vibration. The combination of 0° clearance and a 55° lead angle supports a wide range of turning strategies while the double-sided chipbreaker provides consistent chip formation and evacuation, which contributes to surface quality and process reliability. Lower cost per cutting edge through reversible design A double-sided, indexable construction means two usable cutting edges per insert, lowering the cost per edge compared with single-use solutions. The 0.8 mm corner radius increases edge strength for interrupted cuts and helps achieve a consistent surface finish without sacrificing robustness. The insert’s 6.35 mm thickness adds stiffness at the cutting zone, supporting stable cutting conditions and allowing higher metal removal rates when the rest of the process is optimised. Paired with proper fixturing and cutting data, this insert can improve throughput and reduce tool-change frequency in serial production. Contact Metav Werkzeuge today to confirm holder compatibility, request customised cutting data or place an order — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6741658 SKU: 6741658-Tungaloy Manufacturer SKU: TUN6741658 Designation: DNMG150608 AH8015 Tungaloy insert Model series: ISO indexable turning inserts Use: Turning (external and internal) Core data Insert size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Lead angle: 55° Relief angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Special features PVD-coated carbide (AH8015) Rhombic plate form (DNMG) ISO-standard designation DNMG150608 Suitable for heat-resistant alloys Compatibility determined by shape, relief angle, tolerance class, clamping, size and thickness Double-sided chipbreaker for consistent chip control Cylindrical hole for secure mounting FAQ What is the primary application for this insert? The DNMG150608 AH8015 Tungaloy indexable insert (SKU 6741658-Tungaloy) is intended for external and internal turning, especially where a balance of wear resistance and edge stability is required. Which materials is the AH8015 grade best suited to machine? AH8015 is a first-choice grade for machining heat-resistant alloys; its PVD-coated carbide composition provides improved resistance at elevated temperatures while maintaining cutting-edge stability. How can compatibility with existing toolholders be verified? Compatibility is checked by matching shape, relief angle, tolerance class, clamping method, size and thickness; the DNMG150608 form, 6.35 mm thickness and cylindrical hole should be compared against the holder’s specification before installation. Is the insert reversible or single-use? The insert is double-sided with a chipbreaker on each face, offering two usable cutting edges and reducing cost per edge compared with single-use inserts. How does the 0.8 mm corner radius influence part finish and strength? A 0.8 mm corner radius provides increased edge strength for interrupted cuts and helps deliver a reliable surface finish; it is a compromise between cutting forces and the desired surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of PVD‑coated cemented carbide and a 0.8 mm corner radius for consistent edge life and reliable chip control in turning operations; order directly via Metav Werkzeuge or contact the consultants for application support. DNMG150608 AH8015 DNMG 150608 turning insert, 0.8 mm corner radius — Tungaloy DNMG150608 AH8015 is a rhombic, ISO‑standard indexable insert designed for general turning of heat‑resistant alloys and other demanding materials. ISO‑standard rhombic geometry PVD‑coated cemented carbide AH8015 0.8 mm corner radius for robust edges Double‑sided insert with cylindrical hole Reliable cutting performance for demanding turning tasks The combination of a PVD‑coated surface and cemented carbide substrate in grade AH8015 offers a purposeful balance between wear resistance and edge stability, which is especially valuable when machining heat‑resistant alloys. The coating reduces adhesive wear and helps maintain stable cutting conditions, while the substrate preserves the cutting edge under intermittent loads. This makes the insert suitable for steady production where tool life and surface finish must be predictable; selection of an appropriate chipbreaker and cutting parameters supports consistent chip formation and process stability. Straightforward integration with ISO tooling systems As an ISO‑standard rhombic insert, compatibility is a matter of geometry and mounting specification: form, clearance angle, tolerance class, fastening, size and thickness determine the correct holder pairing. The 55° included angle and 6.35 mm plate thickness align with common external and internal turning holders, and the cylindrical hole ensures secure clamping with standard screws and seats. This modular approach simplifies tool inventory management and allows seamless replacement in established tool systems while maintaining repeatable set‑ups and concentricity. Productivity gains through predictable chip control and repeatability The double‑sided design and the 0.8 mm corner radius deliver plug‑and‑play versatility: indexing to a fresh edge is quick, reducing downtime and supporting higher machine utilisation. The insert’s geometry and chipbreaker arrangement aid stable chip evacuation in typical turning operations, which contributes to improved productivity and consistent surface quality. For shops prioritising process reliability, the insert supports reproducible results across batches and helps reduce scrap rates when paired with suitable cutting data and holder rigidity. Contact Metav Werkzeuge for tailored application advice and availability of the Tungaloy DNMG150608 AH8015 insert; technical consultants are available via info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability and delivery options Technical data Article number: 6947263 Manufacturer SKU: TUN6947263 SKU: 6947263‑Tungaloy Material: cemented carbide Coating: PVD Core technical data Insert designation: DNMG150608 Grade: AH8015 Corner radius: 0.8 mm Plate thickness: 6.35 mm Inscribed circle/size: 15 mm Included angle: 55° Hole: cylindrical Special features ISO‑standard rhombic insert Double‑sided with chipbreaker on both faces Designed for turning (external and internal) Compatible with ISO turning holders depending on geometry and fastening Optimised for machining heat‑resistant alloys and general turning operations Model series: ISO turning indexable inserts FAQ What materials is this insert intended for? The AH8015 grade is intended primarily for the general machining of heat‑resistant alloys; the DNMG150608 AH8015 insert is optimised to balance wear resistance and edge stability when turning such materials. Will this insert fit existing ISO turning holders? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; the ISO‑standard DNMG150608 geometry matches common holders that accept 55° rhombic inserts with a 6.35 mm thickness. How is the insert secured in the holder? The insert features a cylindrical hole for standard clamping with a screw and seat; the double‑sided design permits indexing to a fresh cutting edge after rotation. Can the insert be used for internal turning as well as external turning? Yes, the model series is specified for both external and internal turning; selecting the appropriate holder and chipbreaker will ensure optimal performance for the chosen operation. What are the practical benefits of the AH8015 coating and grade? The PVD‑coated AH8015 grade provides a reliable compromise between wear resistance and cutting edge robustness, enhancing process consistency and tool life in demanding turning applications. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150608 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a wear-resistant PVD coating and precise geometry for dependable turning results. Order the inserts directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. DNMG 150608 AH8015 indexable insert for turning — Tungaloy The DNMG150608 AH8015 is an ISO-standard rhombic indexable insert optimised for general turning of heat‑resistant alloys and demanding external and internal turning tasks ISO-standard rhombic insert DNMG150608 PVD-coated carbide grade AH8015 0.8 mm nose radius for fine detail Double-sided chipbreaker with cylindrical hole Consistent cutting performance for productive turning The ISO-design insert delivers a reproducible cutting geometry that supports stable machining cycles and predictable tool life. Manufactured from carbide and finished with a PVD coating, the grade offers a balanced combination of wear resistance and edge stability, making it a first choice for the general machining of heat‑resistant alloys. The standardised DNMG form and the defined seating and clamping features ensure consistent repeatability in a production setting, reducing setup variation and improving process reliability. Material and coating designed for heat‑resistant alloys The AH8015 grade is formulated to handle elevated temperatures encountered when machining high‑temperature alloys. The PVD coating reduces adhesion and enhances thermal resistance while the substrate provides toughness against chipping. This pairing translates into fewer unplanned tool changes and more predictable surface finishes when compared with uncoated grades. For shops seeking economical yet robust performance, the combination of substrate and coating supports longer intervals between indexings without compromising edge life. Geometry and dimensions that ease integration Key dimensions are set to international ISO norms to simplify toolholder selection and machine integration. The insert features a 0.8 mm nose radius and a 6.35 mm thickness on a 15 mm inscribed circle, with a principal cutting edge angle of 55° and a relief (rake) angle of 0°. The rhombic shape and the central cylindrical hole enable secure clamping and compatibility with common DNMG holders, while the double-sided chipbreaker permits economical use of both cutting edges before indexing, supporting efficient tool utilisation. Practical benefits on the shop floor Using an ISO indexable insert with standardised tolerances simplifies stocking and reduces the number of special holders required. The robust grade and chip control features contribute to consistent surface quality and swarf formation, which in turn improves handling and downstream cleaning. When selecting inserts for a new part, pairing the AH8015 grade with a chipbreaker suited to the workpiece material and the machine's rigidity will typically yield the best compromise between productivity and component finish. Contact Metav Werkzeuge for tailored application advice, availability of Tungaloy DNMG150608 AH8015 inserts and recommendations for holder compatibility; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947153 Manufacturer SKU: TUN6947153 Label: DNMG150608 AH8015 Tungaloy indexable insert Manufacturer article number: 6947153 Facts Nose radius: 0.8 mm Thickness: 6.35 mm Inscribed circle / size: 15 mm Relief angle: 0° Cutting edge angle: 55° ISO designation: 150608 Special features Material: carbide Coating: PVD Grade: AH8015 Chipbreaker: double-sided Hole style: cylindrical hole Shape: rhombic Application: turning Model series: ISO indexable inserts Compatibility: determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert intended for? The AH8015 grade is specified for the general machining of heat‑resistant alloys; its combination of carbide substrate and PVD coating suits elevated‑temperature cutting conditions. How can I check holder compatibility? Compatibility depends on matching the insert form, relief (rake) angle, tolerance class, clamping method, size and thickness; verify these parameters against the chosen holder before assembly. What are the key physical specifications of the insert? The insert has a 0.8 mm nose radius, 6.35 mm thickness, 15 mm inscribed circle, 55° edge angle and 0° relief angle; SKU TUN6947153 and article number 6947153 identify this item. Is the insert single or double sided? This DNMG form includes a double‑sided chipbreaker, allowing both cutting edges to be used before indexing. Why choose the AH8015 grade for turning? AH8015 offers a balanced performance between wear resistance and edge stability, benefitting applications on heat‑resistant alloys where both thermal resistance and cutting edge integrity are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide durability and precise 55° rhombic geometry with a 0.8 mm corner radius for reliable turning performance; the balanced AH8015 grade is optimised for heat‑resistant alloys and general machining tasks. Order the DNMG150608 AH8015 indexable turning insert directly via Metav Werkzeuge or request application advice from our specialists. DNMG150608 AH8015 – Indexable turning insert, PVD-coated carbide, 55° geometry (Tungaloy) DNMG150608 AH8015 is an ISO‑standard indexable insert for turning applications, engineered for general machining of heat‑resistant alloys and adaptable to a wide range of external and internal turning tasks ISO DNMG rhombic insert, 55° cutting angle PVD-coated carbide grade AH8015 0.8 mm corner radius for versatile turning Double-sided chipbreaker, cylindrical hole for secure clamping Consistent cutting geometry for repeatable results The rhombic 55° geometry and ISO conformity ensure consistent engagement and simple holder compatibility. The defined relief (clearance) angle and standard dimensions make tool setup predictable; compatibility depends on form, clearance angle, tolerance class, clamping and thickness, which helps to reduce setup time and scrap. With a 6.35 mm thickness and standard 15 mm size, the insert fits commonly used DNMG holders, providing predictable cutting behaviour for both roughing and finishing passes. Coating and substrate tuned for heat-resistant alloys The PVD coating on a carbide substrate provides a balance between wear resistance and edge stability, making this grade a solid choice for machining temperature‑resistant materials. The AH8015 grade was developed as a first choice for general machining of heat‑resistant alloys, delivering extended tool life under thermally demanding cutting conditions while maintaining a reliable cutting edge for stable productivity. Practical system advantages and mounting reliability Designed as part of an ISO turning insert system, the insert works together with a compatible external holder, shim and clamping set. The cylindrical hole and double‑sided configuration allow cost‑efficient indexing of the insert, effectively doubling service life before disposal. Clear specifications for size, thickness and hole style support straightforward ordering and inventory management, reducing machine downtime and simplifying tool logistics. Choosing the correct chipbreaker and application match Select the chipbreaker and grade to suit the material, machining strategy and machine stability; this insert features a double‑sided chipbreaker, suited to varied feed and depth conditions. For interrupted cuts or unstable setups, prefer chip control options that promote safe chip evacuation. When machining demanding alloys, the combination of AH8015 grade and PVD coating delivers a pragmatic compromise between wear resistance and cutting edge robustness for dependable production. Contact Metav Werkzeuge to discuss suitability for specific heat‑resistant alloys and holder compatibility, or request engineering guidance on grade and chipbreaker selection via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947187 Manufacturer article number: 6947187 Manufacturer SKU: TUN6947187 SKU: 6947187-Tungaloy Model series: ISO turning indexable inserts Facts Insert designation: DNMG150608 Grade: AH8015 Material: Carbide (Hartmetall) Coating: PVD Size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Hole: with hole, cylindrical Special features ISO‑standard DNMG form, rhombic shape Double‑sided chipbreaker for indexable use PVD‑coated carbide substrate optimised for heat‑resistant alloys Designed for external and internal turning applications System build: insert, holder, shim/clamping set and replacement screws FAQ Which toolholders are compatible with this insert? Compatibility is determined by the ISO DNMG form; the DNMG150608 AH8015 insert fits holders that accept DNMG inserts provided the form, clearance angle, tolerance class, clamping method, size and thickness match. What materials is this grade best suited for? The AH8015 grade with PVD coating is a first choice for general machining of heat‑resistant alloys, offering a balance between wear resistance and edge stability for temperature‑challenging materials. Is the insert single‑ or double‑sided? The insert is double‑sided with a cylindrical hole, allowing indexing to use both cutting edges and improving cost efficiency per insert. What are the key dimensional details to check before ordering? Verify designation DNMG150608, corner radius 0.8 mm, thickness 6.35 mm, size 15 mm and the 55° rhombic geometry to ensure correct fit and cutting performance. How does the PVD coating affect cutting performance? The PVD coating enhances surface hardness and wear resistance at elevated temperatures, extending life when machining heat‑resistant alloys while helping to preserve a stable cutting edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150608 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of consistent surface finish, even wear and ISO compatibility for reliable finishing operations; the insert’s coated cermet AT9530 substrate and 0.8 mm corner radius deliver predictable results in turning. Order the DNMG150608 AT9530 Tungaloy insert via Metav Werkzeuge or request advice from our consultants for tool set-up and holder compatibility. DNMG150608 AT9530 — Turning insert by Tungaloy, coated cermet for finishing DNMG150608 AT9530 is a rhombic, ISO-format indexable insert designed for external and internal turning, optimised for surface quality and uniform wear DNMG 150608 format, 55° rhombic Coated cermet grade AT9530 0.8 mm corner radius for finishing Double-sided chipbreaker, cylindrical hole Predictable surface quality for finishing operations The DNMG150608 AT9530 insert is engineered to support high-quality finishing passes on steel. The combination of a coated cermet substrate and a finely balanced chipbreaker produces a uniform wear pattern, which reduces the need for frequent edge changes and helps maintain consistent component finish. In practical terms, this means fewer interruptions in a production run and more predictable part tolerances when performing light to moderate turning operations. Simple integration with ISO holders and secure clamping Compatibility is determined by insert form, clearance and tolerance class; the ISO DNMG150608 designation ensures straightforward matching with standard external holders and boring bars. The 0° clearance angle and 6.35 mm thickness contribute to a stable seating in the pocket and reliable clamp engagement. For shops prioritising process stability, the clear ISO specification simplifies tooling procurement and reduces setup time during tool changes. Coating and substrate tuned for even wear and surface finish The AT9530 coating on the coated cermet substrate is focused on finishing and light machining of steel, emphasising surface integrity and balanced abrasion resistance. A cermet construction offers improved edge stability and reduced built-up edge tendency in finishing cuts, so the cutting edge maintains geometry longer. As a result, operators benefit from more consistent part quality across batches and longer effective edge life on delicate finishing tasks. Chip control and geometry choices that reduce rework The double-sided chipbreaker and 0.8 mm corner radius are configured to favour stable chip formation and fine surface results; the rhombic shape with a 55° included angle gives a compromise between approach angle and cutting edge engagement, suitable for both external contours and internal profiles. Selecting the appropriate chipbreaker and radius for the workpiece material and spindle stability will minimise vibrations and lower the likelihood of rework, improving overall throughput in the turning cell. For technical clarification, holder recommendations or to specify the right Tungaloy finishing insert for a given application, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the DNMG150608 AT9530 and its integration into existing toolsets Technical data Article number: 6773694 Manufacturer SKU: TUN6773694 Label: DNMG150608 AT9530 Tungaloy insert Facts Inscribed circle / size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 55° Special features Coating / grade: AT9530 Cutting material type: coated cermet Shape: rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Application: turning Model series: ISO turning indexable inserts FAQ What machining tasks is this insert best suited for? The DNMG150608 AT9530 insert is intended for finishing and light turning on steel, where surface quality and even wear are priorities. How does the AT9530 coating affect performance? The AT9530 coating on the coated cermet substrate improves edge stability and produces uniform wear, enhancing surface finish and prolonging effective cutting life for finishing cuts. Is the insert compatible with standard ISO DNMG holders? Yes, the ISO DNMG150608 designation ensures compatibility with standard DNMG holders when form, clamp, tolerance and size are matched. What is the purpose of the 0.8 mm corner radius? A 0.8 mm corner radius provides a balance between edge strength and fine surface finish, making it suitable for light finishing passes and small profile features. Does the insert have a centrally located hole and what is its style? The insert is supplied with a cylindrical hole, enabling secure clamping in compatible holder pockets for repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a precisely defined ISO geometry, the AT9530 coated cermet cutting grade and a 0.8 mm corner radius for consistently high surface quality and predictable tool life; order the insert directly via Metav Werkzeuge or consult the technical team for application guidance. DNMG150608 150608 AT9530 Turning Insert (DNMG) — Coated Cermet, 0.8 mm Radius (Tungaloy) DNMG150608 AT9530 is an ISO‑format turning insert designed for finishing and light turning operations on steel, offering a rhombic geometry and a cylindrical hole for secure clamping and repeatable seating. Coated cermet grade AT9530 Rhombic DNMG geometry 0.8 mm corner radius Cylindrical hole, double-sided chipbreaker Optimised finishing performance for turning operations The rhombic DNMG geometry combined with the AT9530 coated cermet delivers a finishing‑optimised cutting condition that prioritises surface integrity and uniform wear. The moderate 0.8 mm corner radius produces a favourable balance between edge strength and surface finish, making the insert particularly suitable for light and finishing cuts where dimensional accuracy and low roughness are required. The coating stabilises the cutting edge under standard turning parameters, reducing flank wear and preserving component quality over longer production runs. Compatibility and secure clamping for repeatable results Designed as an ISO turning indexable insert, the plate is compatible with holders that match the DNMG form, clearance angle and tolerance class. The presence of a cylindrical hole ensures reliable fastener engagement and repeatable positioning in the seat, which simplifies tool changeovers and reduces setup variability. The 0° clearance angle and 55° included angle influence contact geometry and must be considered when selecting the corresponding holder to achieve the intended cutting engagement and chip flow. Material and cutting grade explained for process clarity The insert is supplied with a coated cermet cutting grade (AT9530) while the body is based on a cemented carbide construction, combining wear resistance with fracture toughness. Cermet grades excel in producing consistent surface finishes due to their hard, wear‑resistant matrix and controlled edge breakdown. The double‑sided chipbreaker is optimised for light to finishing cuts in steel, controlling chip shape and evacuation to reduce build‑up and improve consistency across batches. Productivity benefits and process reliability Selecting this insert supports a process‑centric approach: the cutting grade is tuned for uniform wear, which reduces the frequency of indexings and contributes to stable cycle times. The standardised ISO format facilitates rapid replacement and inventory management across machining centres. For manufacturers aiming to maintain tight tolerances and reproducible surface quality in serial production, the combination of geometry, chip control and a robust grade helps to increase uptime and lower overall machining variability. For tailored application advice, stock confirmation or to request batch availability of the Tungaloy DNMG150608 AT9530 turning insert, contact Metav Werkzeuge for technical consultation and prompt supply. Technical data Article number: 6773690 Manufacturer SKU: TUN6773690 Item SKU: 6773690-Tungaloy Name: DNMG150608 AT9530 Tungaloy turning insert Model series: ISO turning indexable inserts Core specifications Plate size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 55° Hole: with hole (cylindrical) Features & applications Cutting grade: AT9530 (coated cermet) Body material: cemented carbide Plate form: rhombic (DNMG) Chipbreaker: double‑sided Application: turning (finishing and light turning of steel) FAQ What holders are compatible with this insert? Compatibility requires holders that accept the DNMG form and match the clearance angle, tolerance class, clamping method and plate thickness; the DNMG150608 AT9530 insert fits standard DNMG external and internal turning holders when these parameters align. Is this insert suitable for roughing operations? This grade and geometry are optimised for finishing and light turning of steel; for heavy roughing a more robust geometry or a different grade is recommended instead of the DNMG150608 AT9530 insert. What does AT9530 mean for cutting behaviour? AT9530 denotes a coated cermet grade engineered for good surface finish and uniform wear during finishing‑type cuts; the specification emphasises consistent edge performance in steel machining. How does the chipbreaker affect machining? The double‑sided chipbreaker on this DNMG insert controls chip formation in light and finishing passes, improving evacuation and supporting repeatable surface quality when used within recommended cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150608 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of consistent wear resistance, stable chip control and straightforward ISO compatibility for predictable turning results. Order the insert directly via Metav Werkzeuge or request production advice from their team. DNMG150608 GH330 ISO turning insert — Tungaloy, rhombic geometry, double-sided chipbreaker DNMG150608 GH330 is an ISO-standard rhombic turning insert intended for general external and internal turning applications, offering a balance of wear resistance and edge stability in demanding shop-floor conditions. ISO rhombic turning insert DNMG150608 Tungaloy GH330 grade for wear resistance Double-sided chipbreaker for reliable chip control Cylindrical hole and 6.35 mm thickness for secure clamping Reliable cutting performance through material and grade The DNMG150608 GH330 indexable insert combines a carbide substrate with Tungaloy's GH330 grade to deliver consistent cutting-edge life under varied machining conditions. The combination of wear resistance and intrinsic edge stability reduces the need for frequent tool changes, which supports higher machine utilisation and lower downtime. The insert's geometry promotes stable chip formation, helping to maintain surface finish and dimensional consistency during both roughing and light finishing passes. Predictable fit and clamping for fast tool changes Manufactured to ISO dimensions, the insert features a rhombic form with a cylindrical hole, 6.35 mm thickness and a 0.8 mm corner radius, all of which contribute to predictable seating and repeatable clamping. Compatibility with holders depends on form, clearance angle, tolerance class, fastening, size and thickness, so the standardised designation ensures straightforward replacement in matched tool systems. The insert's 0° clearance angle and 55° approach angle suit a wide range of external and internal turning set-ups while maintaining stable cutting conditions. Operational advantages and suitable applications Thanks to its double-sided chipbreaker and robust grade, the insert performs well in continuous production where steady metal removal and controlled swarf are required. It is appropriate for conventional turning tasks where a compromise between tool life and edge security is needed; selecting the correct chipbreaker and grade in conjunction with machine rigidity and workpiece material will maximise effectiveness. The indexable format allows economical use of cutting edges and straightforward inventory handling for production environments. For applications requiring consistent wear resistance and stable cutting performance, contact Metav Werkzeuge for availability and tailored advice; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6803583 Manufacturer SKU: TUN6803583 Product SKU: 6803583-Tungaloy Model series: ISO turning inserts Facts Insert designation: DNMG150608 Grade: GH330 Material: carbide Corner radius: 0.8 mm Thickness: 6.35 mm Size designation: 15 Clearance angle: 0° Approach angle: 55° Special features Rhombic plate form Cylindrical hole (with hole) Double-sided chipbreaker ISO format for holder compatibility Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What cutting tasks is this insert designed for? The DNMG150608 GH330 Tungaloy insert is designed for external and internal turning tasks where a balance of wear resistance and edge stability is required; selection of chipbreaker should match the workpiece and operation. How many cutting edges are available per insert? This indexable insert features a double-sided chipbreaker, providing multiple usable cutting edges to extend tool life and reduce tooling costs. Which holder features are necessary for a correct fit? Correct fit depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the ISO DNMG designation ensures standardised seating in compatible holders. Does the insert support fine finishing operations? With an appropriate setup and matching chipbreaker, the insert can be used for light finishing as well as general turning, benefiting from the grade's edge stability and consistent performance. What are the key geometric specs to check before ordering? Refer to the corner radius (0.8 mm), thickness (6.35 mm), approach angle (55°), clearance angle (0°) and the rhombic plate form to ensure compatibility with the intended holder and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard geometry, a GH330 carbide grade and a robust double-sided chipbreaker for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG150608 GH330 indexable turning insert — ISO DNMG 150608 for Turning, Tungaloy The DNMG150608 GH330 is an ISO‑standard indexable turning insert designed for external and internal turning where balanced wear resistance and edge stability are required. ISO DNMG 150608 geometry for standard holders GH330 Tungaloy grade for balanced wear resistance Rhombic shape with 0.8 mm corner radius Double-sided chipbreaker, with central hole Consistent productivity through proven geometry and grade The rhombic ISO geometry provides a predictable cutting angle and stable engagement with the workpiece; combined with the GH330 carbide grade, the insert delivers a controlled compromise between wear resistance and toughness. This results in fewer unplanned tool changes and steadier cycle times in serial turning. The central, cylindrical hole and standard dimensions ensure secure clamping in holders designed for DNMG inserts, which helps maintain repeatable cutting conditions across batches. Why the material choice improves process security Manufactured from industrial carbide, the grade is optimised for turning tasks where a balance of edge retention and fracture resistance matters. The GH330 specification augments geometry with the right material behaviour for a wide range of workpiece demands, reducing flank wear and helping to preserve a consistent surface finish. For operations where both robustness and predictable tool life are required, this grade supports higher uptime and reliable component tolerances. Practical compatibility and handling for workshop use The ISO designation simplifies tool selection: the DNMG form, 15 mm size and 6.35 mm thickness are recognised across many external and internal turning toolholders. Compatibility depends on holder form, clearance angle 0°, tolerance class, clamping method and plate thickness, so matching those parameters avoids assembly issues. The double-sided chipbreaker allows indexing to the opposite face where appropriate, extending usable life and improving process economy without complex changeover procedures. For application advice or to secure DNMG150608 GH330 inserts from Tungaloy, contact Metav Werkzeuge for availability and tailored recommendations — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6803587 SKU (manufacturer): TUN6803587 SKU: 6803587-Tungaloy Model series: ISO‑Drehwendeschneidplatten Dimensions & angles Insert size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 55° Features & application Material: carbide Grade: GH330 (Tungaloy) Shape: rhombic Hole: cylindrical central hole Chipbreaker: double-sided Intended application: turning ISO designation: DNMG150608 FAQ What operations is this insert designed for? The insert is intended for external and internal turning operations; the DNMG150608 GH330 indexable insert from Tungaloy is developed to bring stable performance in turning. Which holders are compatible with this insert? Compatibility is based on ISO DNMG geometry and is determined by holder form, clearance angle, tolerance class, clamping method, size and thickness; the DNMG150608 fits standard DNMG holders when these parameters match. What are the key geometry and dimensional values? Key values are: insert size 15 mm, thickness 6.35 mm, corner radius 0.8 mm, clearance angle 0° and included angle 55°. What benefits does the GH330 grade provide? The GH330 grade combines wear resistance, toughness and edge stability to support repeatable machining and longer intervals between tool changes in turning operations. Is the insert indexable on both sides? Yes, the double-sided chipbreaker design allows the insert to be indexed to use the other face where application and holder clamping permit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade for superior surface finish, a precise 0.8 mm corner radius and ISO compatibility for straightforward toolholder matching; order genuine inserts directly via Metav Werkzeuge or contact the team for application advice. DNMG150608 GT9530 indexable turning insert – Tungaloy, coated cermet, 55° approach angle DNMG150608 GT9530 is an ISO‑standard, rhombic turning insert designed for finishing to light universal turning tasks where surface quality and extended tool life are required ISO‑standard rhombic insert, 15 mm Coated cermet grade GT9530 for finishing 0.8 mm corner radius for fine surface finish Double‑sided with cylindrical hole for secure clamp Reliable finishing and extended tool life The DNMG150608 GT9530 indexable insert combines a coated cermet composition with a modest 0.8 mm corner radius to deliver consistent surface quality during finishing and light turning. The coated cermet matrix is optimised for low to moderate cutting forces, which reduces flank wear under stable machining conditions and prolongs tool life. For operations demanding a smooth finish rather than aggressive metal removal, this geometry and grade offer an effective balance between surface integrity and economical productivity without sacrificing dimensional control. Clear compatibility and secure clamping for predictable results As an ISO‑standard plate in a rhombic form, the insert is compatible with holders that match by shape, clearance angle, tolerance class, fastening method, size and thickness. The plate features a cylindrical hole and is double‑sided, enabling economical indexation and reliable clamping in appropriately rated toolholders. The 55° approach angle and 0° clearance specification influence cutting forces and chip flow; correct holder selection ensures the insert performs within its design envelope and contributes to stable, repeatable machining cycles. Process stability and recommended applications This grade is intended as a wear‑resistant finishing to light universal option for machining steel under stable setups. The double‑sided design supports two usable cutting edges per side, improving cost efficiency for serial production. In practice, choose a matching chipbreaker and insert grade according to workpiece material and machine rigidity to exploit the GT9530’s strength in achieving fine surface finish and extended edge life. The combination of coated cermet and precise corner geometry reduces common edge failure modes when feeds and speeds are selected conservatively for finishing passes. Practical selection and handling tips for machining When fitting the plate, note the 15 mm inscribed size and 6.35 mm plate thickness as primary mechanical parameters for holder compatibility. Secure clamping with the correct torque and a matching back‑plate or clamp set reduces vibration and maintains cutting conditions. For best results during finishing, favour lower feed per revolution to harmonise with the 0.8 mm radius and to avoid scalloping; re‑index the plate promptly when wear alters surface quality. The tool system requires a matching holder, base plate and replacement screws as part of a complete machining assembly. For availability of genuine Tungaloy inserts such as the DNMG150608 GT9530 and tailored advice on holder compatibility or machining parameters, contact Metav Werkzeuge for prompt delivery and application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998087 Manufacturer SKU: TUN6998087 SKU: 6998087-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Corner radius: 0.8 mm Inscribed size: 15 mm Plate thickness: 6.35 mm Approach angle: 55° Clearance angle: 0° Special features Material: carbide Coating / grade: GT9530 (coated cermet) Shape: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning (external and internal) FAQ What materials is this insert best suited for? This insert, specified as GT9530 coated cermet, is intended primarily for machining steel in finishing and light universal turning applications. How does the plate index and how many cutting edges are available? The DNMG150608 is double‑sided with a cylindrical hole; each side provides usable edges, enabling economical indexation for sequential edge use. Which holder characteristics must match the insert? Holder compatibility requires matching shape, clearance angle, tolerance class, fastening type, size and thickness to ensure secure clamping and the intended cutting geometry. What surface quality can be expected with this grade? With the GT9530 coating and a 0.8 mm corner radius, the insert is optimised to produce fine surface finishes under stable machining conditions and appropriate feeds. Is this plate suitable for internal as well as external turning? Yes, the insert is suitable for both external and internal turning operations when paired with the correct holder geometry and chip control for the specific task. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of a GT9530 coated cermet grade, precise DNMG geometry and stable mounting for consistent finishing and extended service life; order directly via Metav Werkzeuge or request consultancy for application-specific selection. DNMG 150608 GT9530 — ISO turning insert, coated cermet with 0.8 mm corner radius (Tungaloy) The DNMG 150608 GT9530 is an ISO-standard coated cermet turning insert intended for external and internal turning, optimised for finishing and light general-purpose operations on steel. Coated cermet grade GT9530 Suitable for finishing to light general turning of steel Rhombic DNMG shape with 0.8 mm corner radius Double-sided insert with cylindrical hole Consistent surface quality with a wear-resistant grade The GT9530 grade is a coated cermet designed to deliver a superior surface finish while extending tool intervals under stable cutting conditions. Cermet combines ceramic hardness with metallic toughness, which reduces built-up edge and improves edge stability during finishing passes. The applied coating further enhances wear resistance and heat tolerance, so longer runs and repeatable component quality are achievable without frequent index changes. This results in reduced downtime and predictable productivity in batch or serial turning operations. ISO geometry and secure system compatibility for precision turning The rhombic DNMG form, specified as DNMG150608, provides a 55° approach angle and a 0.8 mm corner radius that favours fine finishing and dimensional control. The insert is manufactured to ISO dimensions and a 0° clearance angle, with a plate thickness of 6.35 mm and a 15 mm plate size; the cylindrical locating hole ensures repeatable seating. Compatibility with clamping systems depends on form, clearance angle, tolerance class, attachment type, size and thickness, so correct pairing with a suitable external holder or boring bar is essential for optimal performance and tool life. System setup and machining recommendations for reliable results Typical use is external and internal turning; the double-sided insert and doppelseitig chipbreaker design allow reversing for economical index utilisation. Selection of the chipbreaker and grade should follow the workpiece material, machining type and assembly rigidity: stable setups favour the GT9530 grade for finishing steel, while less stable conditions may require a different geometry or toolholder. The system comprises the ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. For interrupted cuts or heavy feeds, review holder rigidity and cutting data before proceeding to maintain component quality and insert life. For technical selection of Tungaloy coated cermet inserts and availability checks, contact Metav Werkzeuge for prompt advice — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6998076 Manufacturer SKU: TUN6998076 SKU: 6998076-Tungaloy Model series: ISO turning inserts Manufacturer: Tungaloy Core data Corner radius: 0.8 mm Plate size: 15 mm Plate thickness: 6.35 mm Angle: 55° Clearance angle: 0° Mounting hole: with hole Special features Grade/coating: GT9530 Cutting material: coated cermet Shape: rhombic (DNMG) Chipbreaker: double-sided Hole style: cylindrical hole Application: Turning Typical use: External and internal turning System components: insert, holder/boring bar, shim/clamping set, replacement screws FAQ What is the main application of this insert? The DNMG 150608 GT9530 is intended for external and internal turning, primarily for finishing and light universal turning of steel components. Which materials are suitable for machining with this grade? This coated cermet insert is tailored to machining steel and provides good surface quality and extended life under stable cutting conditions. How is the insert mounted and what is needed for a complete system? The insert seats in an ISO-compatible holder or boring bar; a shim/clamping set and replacement screws complete the system. Compatibility is determined by form, clearance angle, tolerance class, attachment, size and thickness. Can the insert be reversed and reused? Yes, the DNMG150608 is double-sided and reversible, allowing a second cutting edge to be used for economical indexation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise ISO geometry, a wear-resistant GT9530 coated cermet grade and the economic benefits of a double‑sided indexable design for stable finishing operations; order the insert via Metav Werkzeuge or consult our technical advisors for optimal holder selection and machining parameters. DNMG150608 GT9530 Tungaloy insert — ISO rhombic turning insert for finishing and light universal turning, coated cermet grade for steel The DNMG150608 GT9530 Tungaloy insert is an ISO‑standard rhombic, double‑sided indexable insert designed for turning applications, offering a 55° approach angle and a 0.8 mm corner radius for improved surface quality. Coated cermet grade GT9530 for steel Rhombic 55° geometry for turning 0.8 mm corner radius for smooth finish Consistent surface quality and extended tool life for finishing The GT9530 coating combines a coated cermet substrate with a wear‑resistant surface treatment that prioritises surface finish and predictable flank wear in stable setups. As a finishing to light universal grade for steel, this insert delivers uniform performance across repeated cycles, reducing rework and stabilising process output. The microgeometry of the grade moderates built‑up edge and lowers friction at the cutting zone, which translates into longer tool life and fewer indexations during production runs. Reliable clamping and interchangeability for efficient tool management With an ISO designation and a rhombic form, the insert’s 55° lead angle and 0.8 mm corner radius provide a balance between edge strength and finish capability. The central cylindrical hole enables secure fastening in standard holders; compatibility is governed by form, relief angle, tolerance class, fastening method, size and thickness. Using ISO‑compliant indexable inserts simplifies tool logistics, enabling rapid replacement and predictable set‑up times that support a smooth production flow. Stable cutting with an optimised chip formation strategy The double‑sided chipbreaker geometry is designed for controlled chip flow in turning operations under stable conditions, supporting consistent feed rates and reducing vibration risk. Being double‑sided also offers economic advantages—two usable edges per indexation—so machining costs per edge are lowered. As part of the recommended system (insert, suitable external holder or boring bar, backing pad/clamp set and replacement screws), the insert is best applied where machine and workpiece rigidity permit fine finishing cuts and repeatable surface targets. Contact Metav Werkzeuge to specify the DNMG150608 GT9530 Tungaloy insert for current jobs and to receive precise holder and parameter recommendations; technical consultants are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6998080 Manufacturer SKU: TUN6998080 SKU: 6998080-Tungaloy Model series: ISO-Drehwendeschneidplatten Core technical data ISO designation: DNMG150608 Insert size: 15 mm Thickness: 6.35 mm Relief angle: 0° Lead angle: 55° Corner radius: 0.8 mm Hole style: cylindrical (with hole) Special features Material: carbide (cemented carbide) Grade/coating: GT9530 (coated cermet) Chipbreaker: double-sided Shape: rhombic, double-sided indexable Application: turning; finishing to light universal cuts in steel Compatibility: ISO standard; holder compatibility by form and tolerance FAQ What materials is the GT9530 grade suited for? The GT9530 grade is formulated for machining steel, delivering wear resistance and an improved surface finish in finishing to light universal turning applications with stable cutting conditions. How is holder compatibility determined for this insert? Compatibility depends on the insert’s form, relief angle, tolerance class, fastening method, size and thickness; the DNMG150608 designation and the central cylindrical hole allow straightforward matching to ISO‑compliant external holders and boring bars. How many cutting edges are available per indexation? The rhombic, double‑sided design provides two usable cutting edges per indexation, which supports cost efficiency and quick edge changes in serial production. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength and improves surface quality during finishing passes, while also offering a compromise between robustness and the ability to achieve fine surface tolerances. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150608 KS05F Wendeplatten - Tungaloy
Benefit from the combination of KS05F carbide toughness and ISO DNMG geometry for consistent chip control and extended edge stability; the rhombic form and cylindrical hole ensure reliable clamping and interchangeability in standard holders. Order the DNMG150608 KS05F turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150608 KS05F indexable turning insert — ISO rhombic, 0° relief, Tungaloy DNMG150608 KS05F is an ISO‑standard rhombic indexable insert designed for versatile external and internal turning across a broad range of workpiece materials ISO rhombic DNMG150608 geometry KS05F carbide grade for balanced wear Cylindrical hole for secure clamping Double-sided chipbreaker for extended life Productive machining through balanced carbide grade and chip control The combination of the KS05F carbide grade and a double-sided chipbreaker delivers a balanced mix of wear resistance and edge toughness, ideal for steady, productive turning operations. The cutting grade is selected to complement the insert geometry so that wear progression is predictable and tool life is optimised. As an ISO‑conforming rhombic insert, the component supports consistent engagement angles with common external and internal turning holders, reducing setup variance and helping to maintain surface finish and dimensional accuracy across series production runs. Accurate clamping and geometry that simplifies tool selection With the rhombic DNMG geometry, a 0° relief and an included angle of 55°, the insert offers a neutral cutting stance suitable for a wide range of turning tasks. The cylindrical hole ensures positive axial location while the insert’s 6.35 mm thickness and 0.8 mm corner radius provide mechanical stability and resistance to edge chipping. These measurable characteristics simplify holder compatibility: form, relief angle, tolerance class, fixing method, size and thickness determine suitability, allowing reliable interchangeability between standard external holders and boring bars without functional compromises. Application focus and practical benefits for workshop workflows Intended for turning, this insert supports both roughing and finishing when the correct chipbreaker and grade are chosen according to workpiece material and machine stability. The carbide construction contributes to a consistent cutting edge under varied cutting parameters, while the ISO format enables easy inventory management and fast replacement. For production environments seeking repeatable throughput, the insert’s design reduces downtime for tool change and inspection, and the balanced grade extends intervals between regrinds or replacements — a pragmatic choice for manufacturers prioritising steady process output and predictable tool costs. For technical advice, application support or to procure the Tungaloy DNMG150608 KS05F indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 and request the TUN6934805 reference. Technical data Article number: 6934805 SKU: 6934805-Tungaloy Manufacturer SKU: TUN6934805 Model series: ISO‑Drehwendeschneidplatten Designation: DNMG150608 Grade: KS05F Material: carbide Data Corner radius: 0.8 mm Thickness: 6.35 mm Insert size: 15 mm Relief angle: 0° Included angle: 55° Hole style: cylindrical Special features ISO rhombic insert Double-sided chipbreaker Cylindrical hole for positive clamping Suitable for external and internal turning Compatibility determined by form, relief angle, tolerance, fixing, size and thickness FAQ What materials can be machined with this insert? The DNMG150608 KS05F insert is designed for turning a wide range of materials when the correct chipbreaker and machining parameters are selected; the KS05F grade provides a compromise of wear resistance and toughness suitable for many steels and general workshop applications. Is the insert reversible or single-use per side? This is a double-sided ISO indexable insert: both sides are usable, which doubles the effective cutting edges before disposal or regrinding of the carbide component. How does the 0° relief affect cutting behaviour? A relief angle of 0° gives a neutral cutting geometry that can be advantageous for stable turning setups and helps maintain consistent engagement angles with standard holders, reducing variability in interrupted cuts. Which holder features are required for correct compatibility? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; choose an external holder or boring bar that matches the DNMG profile and accepts a 15 mm designation with a 6.35 mm plate thickness. What is the manufacturer reference for ordering and spare parts? Order using article number 6934805 or manufacturer SKU TUN6934805; the item is listed as DNMG150608 KS05F from Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of consistent surface quality, ISO compatibility and predictable tool life to keep finishing operations steady and efficient; order the DNMG150608 NS520 Tungaloy turning insert through Metav Werkzeuge or request tailored advice from our consultants. DNMG150608 NS520 Tungaloy — ISO-indexable turning insert, cermet grade for finishing DNMG150608 NS520 Tungaloy is an ISO-indexable rhombic turning insert designed for finishing to light turning of steel components, offering stable wear behaviour and high surface quality for precise production runs. ISO-standard rhombic insert, 55° geometry Cermet grade NS520 for fine surface finish 0.8 mm corner radius for precision turning Double-sided insert with cylindrical hole Consistent surface quality and dimensional control for finishing work The NS520 cermet grade is optimised for finishing to light turning of steel, providing a balanced combination of hardness and toughness that promotes uniform wear and a refined part finish. Cermets are characterised by a hard ceramic matrix with metal bonding, delivering superior surface finish and reduced built-up edge compared with conventional carbides. This results in improved dimensional control across series production, meaning fewer reworks and a more reliable final tolerance. The double-sided configuration further supports economy of use by offering additional indexable edges before replacement. Secure seating and ISO-based compatibility to simplify tool selection Built to ISO dimensions, the rhombic 55° geometry and the 0° relief angle ensure compatibility with standard DNMG holders when the form, clearance angle, tolerance class, fastening method, size and thickness match. The insert’s cylindrical hole provides positive location and reliable clamping with indexable holder systems, reducing the risk of seat movement under cutting forces. This standardisation speeds up tool changeover and lowers set-up variability, which benefits production flows that require repeatable accuracy. Stable chip formation and process reliability for repeatable productivity The insert’s double-sided chipbreaker design supports controlled chip formation during finishing cuts, helping to maintain process stability even when batch sizes increase. With the NS520 grade tuned to wear evenly, the component run maintains consistent surface quality over multiple tool indices. This predictability enhances machine uptime and operator confidence: choosing the correct chipbreaker and matching cutting parameters results in efficient material removal without sacrificing the required finish or tolerances. Practical selection guidance for precise turning applications For precision external and internal turning tasks, select an appropriate holder and clamp set suitable for the DNMG150608 geometry and the 6.35 mm plate thickness to ensure secure fixation. The 0.8 mm corner radius suits fine turning where a balance between edge strength and detail is needed—smaller radii support tighter radii features, while preserving edge life in finishing passes. If assistance is required in matching holder style, chipbreaker or cutting data, experienced technical advice is available to help specify the correct combination for the intended material and machining stability. Contact Metav Werkzeuge for further guidance on integrating Tungaloy NS520 cermet inserts into the production process and to discuss suitable holders and cutting parameters; Metav Werkzeuge can advise on application-specific choices and availability Technical Data Manufacturer article number: 6803596 Manufacturer SKU: TUN6803596 SKU: 6803596-Tungaloy Model series: ISO-indexable turning inserts Material: cemented carbide (Hartmetall) Core specifications Size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Insert angle: 55° Relief angle: 0° Hole: with cylindrical hole Features Grade / coating: NS520 (cermet) Application: finishing to light turning of steel Chipbreaker: double-sided Shape: rhombic Compatibility: ISO-dimensioned insert, relies on matching holder form, clearance angle, tolerance class, fastening, size and thickness FAQ Is this insert suitable for finishing steel? Yes. The DNMG150608 NS520 Tungaloy insert is a cermet-grade indexable insert optimised for finishing to light turning of steel, offering improved surface finish and consistent wear. Which holders fit this insert? Holders designed for DNMG150608 geometry and a 6.35 mm plate thickness with a compatible seat and fastening method are appropriate; the insert’s cylindrical hole and ISO rhombic form ensure standardised seating when the holder matches those dimensions. How does the double-sided design affect usability? The double-sided design provides multiple indexable cutting edges, extending the usable service life per insert and supporting economical tool utilisation in finishing operations. Can this insert be used for internal turning as well as external turning? Yes. The insert is suitable for both external and internal turning applications when paired with the correct holder and stable clamping, as intended by its ISO-indexable design. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 NS9530 Wendeplatten - Tungaloy
Product data conflict: the material is listed as "Hartmetall" (carbide), while the cutting material type is given as uncoated cermet (NS9530). Please verify the source data to ensure accuracy and consistency, as discrepancies like this can lead to confusion or errors in manufacturing processes, procurement decisions, or technical documentation. It is essential to cross-check the information provided in the database or source files to confirm whether the material designation or the cutting material type has been incorrectly assigned or if there is a misunderstanding in the terminology used. Resolving this issue promptly will help maintain data integrity and avoid potential complications.
DNMG 150608 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: one specification indicates the tool is made of cemented carbide, while another specifies an uncoated cermet grade (NS9530). Please verify the correct cutting material before a product description can be generated, as it is essential to ensure that the information provided is accurate and consistent to avoid potential confusion or errors in the manufacturing process, which could lead to inefficiencies, increased costs, or even compromised product quality, especially when dealing with materials like cemented carbide and uncoated cermet, which have distinct properties and applications that must be clearly understood and communicated for optimal performance and customer satisfaction.
DNMG 150608 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and the precise uncoated cermet geometry for consistently improved surface quality and stable machining. Secure supply and expert advice are available via Metav Werkzeuge for reliable integration into existing turning processes. DNMG150608 NS9530 ISO turning insert for finishing by Tungaloy DNMG150608 NS9530 is a rhombic ISO turning insert designed for precision finishing of steel, optimised for continuous cuts and small depths of cut Finishing grade NS9530 for fine surfaces Uncoated cermet for low cutting forces Rhombic 15 mm ISO geometry Double-sided chipbreaker with cylindrical hole Consistent surface finish with low cutting forces The NS9530 finishing grade is an uncoated cermet formulated for a sharp cutting edge and low cutting forces, which directly reduces vibration and improves surface integrity. With a 0.8 mm nose radius and a 0° relief angle, this geometry is tailored to deliver repeatable finishes on steel during small-depth, continuous cuts. The result is fewer rework passes and a reliable first-pass quality, making the grade particularly suitable where surface finish and dimensional stability matter. Simple integration into ISO turning systems Designed as an ISO-standard insert, compatibility with the chosen holder depends on geometry, relief angle, tolerance class, clamping method, size and thickness. The insert’s 15 mm size and 6.35 mm thickness align with common external holders and boring bars; the cylindrical hole enables secure clamping for stable machining. Operators benefit from straightforward system assembly: insert, compatible holder or boring bar, appropriate seat or clamping set, and replacement screws ensure repeatable mounting and rapid indexation. Operational efficiency and measurable process gains Using an uncoated cermet finishing insert reduces cutting forces and often extends the window for high-quality finishing at modest cutting speeds. This translates into improved cycle consistency and reduced downstream finishing. The double-sided chipbreaker increases indexability and cost efficiency, while the precise ISO form and tolerance support predictable tool life. For production environments aiming to increase throughput without compromising surface quality, this insert delivers an effective balance of performance and economy. For help determining the optimal chipbreaker and grade for specific steel alloys, Metav Werkzeuge offers practical advice and technical support. Contact Metav Werkzeuge for tailored machining advice on the Tungaloy DNMG150608 NS9530 finishing insert; technical consultation and fast supply are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6944658 SKU: 6944658-Tungaloy Manufacturer SKU: TUN6944658 Model series: ISO turning inserts Application: Turning Facts Size: 15 mm Thickness: 6.35 mm Nose radius: 0.8 mm Relief angle: 0° Included angle: 55° Special features Material: cemented carbide Grade: uncoated cermet NS9530 Geometry: rhombic insert DNMG150608 Chipbreaker: double-sided Hole: with cylindrical hole Suitable for: finishing of steel System components: ISO insert, holder/boring bar, seat/clamping set, replacement screws FAQ What is the DNMG150608 NS9530 primarily used for? The DNMG150608 NS9530 insert is intended for precision finishing in turning operations on steel, offering a sharp edge and low cutting forces for continuous, small-depth cuts. Is the insert coated? No, the NS9530 is an uncoated cermet grade; this supports a very sharp cutting edge and excellent surface finish on steel components. Which holders are compatible with this insert? Compatibility requires a matching ISO form, the correct relief angle, tolerance class, clamping method, and the 15 mm size with 6.35 mm thickness; holders or boring bars designed for DNMG inserts and a secure clamping set are recommended. Can the insert be used for both external and internal turning? Yes, the geometry and double-sided chipbreaker make the insert suitable for both external and internal turning when paired with a suitable holder or boring bar. How does the 0.8 mm nose radius affect finishing? A 0.8 mm nose radius balances edge strength and surface texture, producing consistent finishes while maintaining dimensional control during low-depth cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com