DNMG 150608 AH6225 Wendeplatten - Tungaloy
Combining a universal AH6225 PVD-coated carbide grade with the ISO DNMG 150608 geometry yields a stable, sharp cutting edge for medium turning of rostfreier Stahl; suitable for both external and internal machining. Order the insert directly via Metav Werkzeuge or request application advice from the technical team. DNMG 150608 AH6225 turning insert by Tungaloy — PVD-coated carbide, 55° rhomboid The DNMG 150608 AH6225 is an ISO-format rhomboid turning insert designed for external and internal turning, optimised for reliable performance when machining rostfreier Stahl. PVD-coated carbide for improved wear resistance Universal grade AH6225 for rostfreier Stahl ISO DNMG 55° rhomboid geometry Double-sided chipbreaker for stable cutting Superior edge life and consistent cutting performance The PVD-coated carbide in grade AH6225 provides a balanced combination of hardness and toughness, giving a sharp, stable cutting edge during medium turning operations. For machining rostfreier Stahl, the coating reduces adhesive wear and helps maintain edge integrity under variable cutting conditions. This results in fewer indexings and more predictable tool life, which supports continuous production and reduces unscheduled downtime. The universal character of the grade makes it suitable where material batches and process stability change frequently. Precise fit and secure clamping for ISO holders Designed to the ISO DNMG form, the insert’s rhomboid 55° geometry and standard dimensions ensure compatibility with a wide range of external holders and boring bars; fit is determined by form, relief angle, tolerance class, fastening, size and thickness. The plate is 15 mm in size with a thickness of 6.35 mm and a corner radius of 0.8 mm, while the 0° clearance supports robust engagement. The central cylindrical hole facilitates secure locating and clamping. Verifying the holder’s specifications against these parameters prevents misalignment and preserves the cutting edge, especially during interrupted cuts. Efficient chip control and flexible application spectrum The double-sided chipbreaker geometry provides controlled chip formation across a variety of feeds and depths, which simplifies chip evacuation and contributes to consistent surface quality. As a universal solution for external and internal turning, the grade accommodates medium machining strategies and is tolerant of modest variations in cutting data. The ability to flip the insert extends usable life per index and improves cost-efficiency in serial production. Reduced chip scatter and predictable chips also enhance workplace safety and post-process handling. System thinking for workshop productivity The insert is supplied as part of a typical ISO insert system: an ISO-format insert, a matching external holder or boring bar, appropriate shim/clamp sets and replacement screws form the complete tooling solution. This system approach ensures straightforward replacement and repeatable positioning when re-indexing or refitting, supporting stable batch performance. For procurement and workshop planning, the Tungaloy grade delivers a practical compromise between durability and versatility, making it a sensible choice for toolrooms that machine rostfreier Stahl alongside other materials. For tailored recommendations on integrating Tungaloy AH6225 inserts into existing toolholders or to secure stock via Metav Werkzeuge, contact Metav Werkzeuge for application support and delivery options Technical Data Article number: 6947235 Manufacturer SKU: TUN6947235 Manufacturer item number: 6947235 Manufacturer: Tungaloy Facts Insert size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Insert angle: 55° Clearance angle: 0° Special features ISO-form DNMG 150608 PVD-coated carbide grade AH6225 Double-sided chipbreaker Cylindrical hole For turning (external and internal) FAQ What materials is this insert suited for? The DNMG 150608 AH6225 insert is principally designed for machining rostfreier Stahl, with the AH6225 grade offering good edge stability for medium turning operations. How does the PVD coating benefit performance? A PVD-coated carbide substrate increases wear resistance and reduces adhesion when cutting rostfreier Stahl, which helps sustain cutting-edge integrity and extends usable life between indexings. Which holders are compatible with the DNMG 150608 geometry? Compatibility depends on holder form, relief angle and fastening method; the ISO DNMG form and the plate’s dimensions (15 mm × 6.35 mm, 55°) should be matched to the holder’s specification to ensure secure clamping and correct seating. Can the insert be used for internal turning as well as external turning? Yes, the insert is suitable for both external and internal turning; the double-sided chipbreaker and the universal AH6225 grade make it versatile across these applications. What is the manufacturer SKU for ordering or referencing? Reference SKU for procurement and documentation is 6947235-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide AH6225 grade and a double-sided chipbreaker for reliable performance in stainless steel turning; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. DNMG 150608 AH6225 indexable insert for turning, 55° rhombic – Tungaloy DNMG150608 AH6225 is an ISO-format turning insert for external and internal turning, designed for stainless steel with a balance of sharpness and edge stability DNMG 150608 format, 55° rhombic geometry PVD-coated carbide grade AH6225 Double-sided chipbreaker, cylindrical hole 0° clearance angle, corner radius 0.8 mm Consistent cutting performance with AH6225 for stainless steel The AH6225 grade is a PVD-coated carbide developed for universal use on stainless steel where conditions vary and edge stability matters. The coating reduces built-up edge and improves wear resistance during intermittent cuts, while the substrate provides sufficient toughness for medium machining. As a result, the insert maintains a sharp yet durable cutting edge, which translates into predictable tool life and fewer machining pauses for tool changes. This stability supports higher productivity in batch production and mixed-series turning. Geometry and clamping deliver dimensional reliability The 55° rhombic shape and 0° clearance combine to give controlled cutting forces and accessible cutting edges for both external and internal operations. The corner radius 0.8 mm smooths chip formation and increases edge strength, reducing the risk of edge chipping under variable feeds. The cylindrical hole and standard ISO DNMG interface ensure secure seating in compatible holders, so clamping repeatability supports consistent part tolerances and surface finish without extra set-up time. Practical system compatibility and handling benefits As an ISO-DNMG insert, the component integrates into common turning systems: matching holders, shims and fasteners determine compatibility by form, free-angle and thickness. The 6.35 mm plate thickness and 15 mm inscribed circle mean straightforward replacement in standard tool posts. The double-sided design offers two indexed cutting edges per side, extending the number of usable edges and improving cost-efficiency per edge. Because the insert is reversible, inventory needs are reduced and machine downtime for tool changes is minimised. Improved process security and productivity in daily use Using the DNMG150608 AH6225 indexable insert supports a predictable machining process thanks to the combination of geometry and coating. The double-sided chipbreaker aids consistent chip control during medium-duty turning, lowering the likelihood of chip entanglement and protecting the workpiece surface. Process planners benefit from the insert’s versatility across varied stainless steel grades, enabling faster set-up times and fewer trial cuts. For operations where repeatability and surface quality are priorities, this grade offers a cost-effective compromise between edge life and cutting performance. Contact Metav Werkzeuge to specify DNMG 150608 AH6225 inserts for stainless steel turning; request application guidance or compatibility checks via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6947210 Manufacturer SKU: TUN6947210 SKU: 6947210-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade / Coating: AH6225 / PVD-coated Facts Geometry angle: 55° Corner radius: 0.8 mm Plate thickness: 6.35 mm Inscribed circle: 15 mm Clearance angle: 0° Hole style: cylindrical hole Special features Double-sided chipbreaker PVD-coated carbide substrate ISO DNMG format, rhombic plate Compatible with standard turning holders Intended application: turning of stainless steel FAQ What machining tasks suit this insert best? This indexable insert is optimised for external and internal turning operations, particularly where stainless steel is processed and a balance of sharpness and edge stability is required. How many cutting edges are available per insert? The double-sided design provides multiple indexed edges; each side can be rotated to a fresh edge, extending usable life and improving cost-efficiency. Is the insert compatible with common DNMG holders? The insert follows ISO DNMG geometry; compatibility depends on holder form, free-angle, tolerance class, fastening and plate thickness—verify holder specifications against DNMG150608 AH6225 dimensions. What benefits does the AH6225 grade offer? AH6225 is a universal PVD-coated carbide grade for stainless steel, offering a stable cutting edge, good wear resistance and consistent performance under variable cutting conditions. Which chip control can be expected? The double-sided chipbreaker supports controlled chip formation during medium machining, reducing the risk of chip-related interruptions and improving surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
Take advantage of a universally applicable PVD-coated AH6225 grade that balances a sharp cutting edge with stability, and the reversible double-sided design that reduces tooling costs while maintaining process reliability; order directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150608 AH6225 Tungaloy turning insert for turning A DNMG150608 AH6225 turning insert designed for stable medium turning operations, optimised for rostfreier Stahl and variable machining conditions ISO DNMG rhombic insert, 55° cutting angle PVD-coated carbide grade AH6225 for rostfreier Stahl Double-sided chipbreaker for reversible use 0.8 mm corner radius for medium finishing Consistent edge life and predictable machining results The insert delivers a balanced combination of a PVD-coated carbide substrate and a geometry tuned for consistent performance. The AH6225 grade is crafted to maintain a sharp yet robust cutting edge under changing cutting conditions, which reduces the need for frequent index changes and supports continuous production. Predictable wear behaviour enables stable component tolerances and lowers total machining costs through fewer tool replacements and less downtime. Effective chip control and surface quality for rostfreier Stahl With a double-sided chipbreaker and ISO-compliant geometry, the geometry assists in controlled chip formation and evacuation during external and internal turning. The chipbreaker, matched to the grade and cutting conditions, improves surface finish and minimises secondary operations. When machining rostfreier Stahl, the combination of edge stability and chip control reduces built-up edge and heat concentration, helping to achieve reliable component quality in one pass. Compatibility, handling and economic benefits The insert conforms to ISO DNMG dimensions and its fit is governed by form, clearance angle, tolerance class, fixation, size and thickness. The rhombic insert with a cylindrical hole is reversible and compatible with standard DNMG holders and boring bars; this reversible use doubles the effective cutting edges per insert. Reduced tool inventory and simpler re-grading of inserts lead to faster tool changeovers and improved shop-floor efficiency, supporting short lead times in batch production. Coating and substrate explained for practical decisions The tool uses a PVD-coated wear-resistant surface applied to a fine-grain carbide substrate, chosen for a broad material range with emphasis on rostfreier Stahl. The coating enhances thermal and abrasive resistance while the substrate provides toughness for medium cutting depths. The 0.8 mm corner radius offers a compromise between edge strength and surface finish; it is suited for finishing to medium-depth turning where rigidity and repeatable geometry are important. For precise component requirements or to request application-specific recommendations for this Tungaloy insert, contact Metav Werkzeuge—technical consultations and sample availability can be arranged via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical Data Article number: 6947186 SKU: 6947186-Tungaloy Manufacturer SKU: TUN6947186 Manufacturer: Tungaloy Core dimensions Size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Cutting angle: 55° Clearance (free) angle: 0° Design & features Insert type: DNMG150608 (ISO) Grade/coating: AH6225, PVD-coated Material: carbide Chipbreaker: double-sided Hole: with cylindrical hole Shape: rhombic FAQ What materials is this insert best suited for? The DNMG150608 AH6225 insert from Tungaloy is formulated for rostfreier Stahl and provides balanced performance across ferritic and austenitic stainless steels. Can the insert be used on both external and internal turning applications? Yes, the ISO DNMG geometry enables use in external and internal turning when paired with a suitable holder and correct mounting tolerance. How does the AH6225 grade affect tool life? The AH6225 PVD-coated grade offers a compromise between edge sharpness and stability, extending usable life in medium cutting when machining rostfreier Stahl. Is the insert reversible and how many cutting edges are available? The rhombic DNMG insert is double-sided and reversible, providing multiple cutting edges per insert to reduce tooling costs. What corner radius is recommended for medium finishing? This insert has a 0.8 mm corner radius, which is intended to balance edge strength with surface finish for finishing to medium operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 grade for reliable performance and a 55° DNMG geometry for versatile turning operations; the result is predictable chip control and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. DNMG150608 AH6225 Tungaloy indexable insert for turning (PVD-coated carbide, 55°) The DNMG150608 AH6225 is an ISO rhombic indexable insert engineered for external and internal turning, providing a sharp yet stable cutting edge suited to medium machining of stainless steels. PVD-coated cemented carbide AH6225 Sharp, stable cutting edge for medium turning ISO rhombic DNMG 55° geometry, hole style cylindrical Double-sided chipbreaker for versatile chip control Reliable edge life and consistent chip control The combination of a PVD-coated AH6225 grade and a robust carbide substrate delivers a balance between sharpness and durability. This results in a cutting edge that resists premature wear while maintaining a clean cutting action, reducing the need for frequent index changes. The integrated chip control geometry – a double-sided chipbreaker – guides chips reliably away from the workpiece, which lowers the risk of rework and improves cycle stability during batches of medium-demand turning tasks. Versatile geometry for external and internal turning The rhombic DNMG form at a 55° lead angle enables flexible application across both external and internal turning operations. As an indexable insert, compatibility with the toolholder is governed by form, clearance, tolerance class, fastening method, size and thickness; the ISO standardisation ensures straightforward replacement and interchangeability. The insert’s cylindrical hole provides secure locating in holders and facilitates repeatable positioning for high-volume machining routines. Predictable surface quality when machining stainless steels Designed as a universal grade for stainless steels, the AH6225 composition supports variable cutting conditions without sacrificing finish quality. The relatively sharp cutting edge minimises built-up edge and helps achieve consistent surface roughness during medium machining passes, which reduces downstream finishing effort. With fewer interruptions for edge changes, the grade contributes to improved productivity and a more favourable cost-in-use ratio for stainless-steel components. Simplified handling and ISO-compliant system integration The insert’s 6.35 mm plate thickness and standardised ISO designation streamline inventory and toolset selection. The ISO conformity of the DNMG form aids rapid identification of compatible holders, shims and clamping kits, reducing setup time. The cylindrical hole and the toleranced geometry ensure positive location and repeatable clamping, while the durable carbide body maintains dimensional stability over multiple indexings, supporting efficient tool management in production environments. Contact Metav Werkzeuge for tailored application support on Tungaloy indexable inserts and to discuss compatibility with existing holders; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt advice and ordering assistance Technical data Article number: 6947262 Manufacturer SKU: TUN6947262 Model series: ISO-Drehwendeschneidplatten Material: Cemented carbide Facts Radius: 0.8 mm Lead angle: 55° Clearance angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Special features Coating: PVD Grade: AH6225 Chipbreaker: Double-sided Hole: Cylindrical Plate form: Rhombic (DNMG) Typical application: Turning of stainless steels System components: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert optimised for? The DNMG150608 AH6225 insert is optimised for machining stainless steels, offering a balance between edge sharpness and wear resistance for medium cutting conditions. How does the chipbreaker affect machining performance? The double-sided chipbreaker on the insert improves chip control and evacuation, which helps maintain consistent cutting forces and reduces the chance of chip interference in turning operations. Is the insert compatible with standard ISO holders? Yes; the DNMG form and ISO designation ensure compatibility with holders that match the form, clearance, tolerance class, fastening method, size and thickness specified for DNMG inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated cemented carbide grade that combines a sharp, stable cutting edge and a double-sided chipbreaker for consistent medium turning of stainless steels; the rhomboid ISO 150608 form and 0.8 mm corner radius ensure reliable component finish and predictable tool life. Order directly via Metav Werkzeuge or consult the technical team when selecting holder compatibility and cutting data. DNMG150608 AH6225 ISO turning insert, PVD-coated carbide, double-sided chipbreaker — Tungaloy DNMG150608 AH6225 is an indexable turning insert designed for external and internal turning, providing a robust cutting edge for medium machining of stainless steels and similar materials ISO 150608 rhomboid format PVD-coated cemented carbide Double-sided chipbreaker 0.8 mm corner radius, 0° clearance Consistent cutting performance with modern coating technology The AH6225 grade features a PVD-coated cemented carbide substrate developed for a balance of edge sharpness and wear resistance. The coating improves thermal stability during intermittent cuts and under variable conditions, which helps maintain a consistent surface finish and extends edge life compared with uncoated grades. For shops aiming to reduce downtime and part rework, the coating plus the substrate composition deliver an efficient compromise between productivity and tool longevity, particularly on stainless steels where adhesion and built-up edge are common challenges. Design and compatibility that simplify toolset planning Built to the ISO 150608 specification in a rhomboid form, the plate is compatible with a wide range of ISO holders when matched for form, clearance angle, tolerance class, fastening method, size and thickness. The indexable design with a double-sided chipbreaker allows economical use of the insert by rotating to fresh edges, reducing tooling consumption per component. When specifying the holder, ensure the 6.35 mm plate thickness and 15 mm size align with the clamping system; correct pairing guarantees the intended cutting geometry and secure fixation during turning operations. Geometry and application advantages for medium machining The insert’s 0.8 mm corner radius and 55° approach angle deliver a compromise between edge strength and surface quality: the radius supports edge robustness on interrupted cuts, while the approach geometry helps control cutting forces and chip formation. The 0° clearance (relief angle) supports stable contact geometry for turning operations. This combination is particularly suited to medium finishing and semi-finishing passes where a consistent surface and repeatable tolerances are required. Selecting the appropriate chipbreaker and cutting parameters will further optimise chip evacuation and extend life under varying feed and speed regimes. System approach and practical recommendations for production This insert forms part of a complete system: the ISO DNMG150608 plate, a corresponding external holder or boring bar, a suitable shim/clamp set and replacement screws. Using correctly matched components secures the intended mechanical support and repeatability at the tool edge. For process planning, consider the AH6225 grade where variable conditions and stainless steels are frequent; its balanced performance reduces the need for frequent tool changes and supports steady production throughput. For additional technical data or tailored recommendations on holder selection and cutting data, the Metav Werkzeuge team can provide application-focused guidance. For tailored advice on implementing Tungaloy’s AH6225 inserts into production, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss holder compatibility and cutting parameters Technical data Article number: 6825922 SKU: 6825922-Tungaloy Manufacturer SKU: TUN6825922 Designation: DNMG150608 AH6225 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Approach angle: 55° Relief/clearance angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Special features PVD-coated cemented carbide (AH6225) Double-sided chipbreaker Rhomboid plate form (DNMG) With cylindrical hole for secure mounting Intended application: Turning (external and internal) FAQ What materials is the DNMG150608 AH6225 insert suitable for? The DNMG150608 AH6225 insert is formulated as a universal grade for stainless steels, offering a balanced combination of a sharp edge and stable performance for medium turning operations. How is the insert mounted and what should be checked for compatibility? Mounting requires a compatible ISO holder matched to the DNMG150608 form, plate thickness (6.35 mm), size (15 mm) and fastening style; the insert’s cylindrical hole supports secure clamping as part of the system. What benefits does the PVD coating bring for machining stainless steels? The PVD-coated surface on the AH6225 grade increases thermal resistance and reduces adhesion tendencies during turning of stainless steels, helping to maintain edge integrity and consistent part finish. Does the insert offer multiple usable edges? The DNMG150608 is an indexable plate with a double-sided chipbreaker, enabling rotation to fresh edges and therefore improved economy per insert compared with single-edge tools. Which features support stability on interrupted cuts? The 0.8 mm corner radius and robust carbide substrate contribute to edge strength, providing greater resistance to chipping during interrupted or variable turning conditions with the DNMG150608 AH6225. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide grade AH6225 for reliable performance in stainless steel turning and the ISO DNMG shape for straightforward toolholder compatibility; order the insert directly via Metav Werkzeuge or request tailored application advice from our consultants. DNMG150608 AH6225 Turning insert – PVD-coated carbide for stainless steel turning (Tungaloy) The DNMG150608 AH6225 is an ISO-standard turning insert designed for external and internal turning operations, optimised for machining stainless steels with a sharp yet stable cutting edge. PVD-coated carbide for stainless steel machining ISO DNMG 150608 rhombic insert, 55° geometry Double-sided chipbreaker for versatile use Cylindrical hole and 0° clearance for secure clamping High-performance cutting for stainless steels and changing conditions The insert delivers consistent cutting performance on stainless steels thanks to the AH6225 PVD-coated carbide grade, which balances edge sharpness and wear resistance. The coating reduces built-up edge and improves surface finish during intermittent cuts and variable feeds, while the substrate maintains edge stability under moderate cutting forces. For manufacturers seeking fewer tool changes and predictable component quality, this combination offers measurable productivity benefits without demanding complex process adjustments. ISO compatibility and secure clamping for stable turning Built to the ISO DNMG specification, the insert’s rhombic 55° geometry and cylindrical centre hole make it compatible with a wide range of external holders and boring bars when matched by form, clearance angle and tolerance class. The 0° clearance angle and standardised thickness (6.35 mm) ensure reliable seating and repeatable positioning, simplifying tool setup and reducing downtime during insert changes. Clear reference to geometry and mounting features supports efficient integration into existing tool systems. Practical advantages in chip control and edge life The double-sided chipbreaker design provides flexible chip control across common turning tasks, supporting both finishing and medium-accuracy roughing of stainless materials. The 0.8 mm corner radius helps distribute cutting forces and extends edge life while permitting acceptable surface integrity on turned parts. Together, the chip control geometry and the AH6225 grade contribute to lower scrap rates and longer intervals between regrinds or replacements, improving overall machining economy. Selection guidance and safe handling for workshop use When selecting an insert, align grade and chipbreaker with workpiece alloy, depth of cut and machine/toolholder rigidity; the AH6225 grade is a universal choice for rostfreie Stähle, especially where a sharp but resilient cutting edge is required. Store inserts in their original packaging, inspect seating surfaces and tightening screws before first use, and observe recommended cutting data from the toolholder or machine manufacturer. For customers less familiar with stainless-steel turning, a short process check under production conditions is advisable to confirm feed and speed settings for optimum tool life. For tailored application advice or to procure DNMG150608 AH6225 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options. Technical data Article number: 6825940 Manufacturer SKU: TUN6825940 SKU: 6825940-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150608 AH6225 Facts Corner radius: 0.8 mm Plate size: 15 mm Thickness: 6.35 mm Clearance angle: 0° Geometry angle: 55° Special features Material: Carbide Coating/type: PVD-coated carbide (AH6225) Plate form: Rhombic Chipbreaker: Double-sided Hole: With cylindrical hole Typical application: External and internal turning FAQ What materials is this insert best suited for? The DNMG150608 AH6225 insert is formulated for machining stainless steels; the PVD-coated carbide grade AH6225 provides a balance of sharpness and edge stability suitable for many rostfreie Stähle applications. Is the insert compatible with standard ISO DNMG holders? Yes, the insert follows ISO DNMG dimensions and will fit holders and boring bars designed for DNMG inserts when matched by form, thickness and tolerance class. How does the chipbreaker affect performance? The double-sided chipbreaker offers adaptable chip control for both finishing and medium cutting; it aids swarf management and supports consistent surface quality under varying feeds. What are the key dimensions to verify before fitting? Confirm the plate size (15 mm), thickness (6.35 mm), corner radius (0.8 mm) and the 55° geometry to ensure correct seating and toolpath outcomes with the chosen holder. Can the insert be used for internal turning as well as external turning? Yes, the DNMG150608 AH6225 is suitable for both external and internal turning operations provided the holder and setup offer sufficient rigidity and access. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge and universal PVD-coated carbide grade for efficient stainless steel turning; order the DNMG 150608 AH6225 insert directly via Metav Werkzeuge or consult the team for application advice. DNMG 150608 AH6225 — ISO turning insert by Tungaloy The DNMG 150608 AH6225 is an ISO indexable turning insert designed for reliable external and internal turning of stainless steels and similar alloys. PVD-coated carbide grade AH6225 ISO DNMG 150608 rhombic 55° geometry Double-sided chipbreaker, cylindrical hole Versatile for stainless steel turning Consistent cutting performance for stainless steel machining The combination of a PVD-coated surface and the AH6225 carbide grade delivers a dependable balance between sharpness and edge stability under varying conditions. The coating reduces built-up edge and improves wear resistance, which translates into longer effective tool life and fewer interruptions to production. For medium cutting regimes, this indexable cutting solution sustains repeatable results and helps maintain consistent component tolerances while reducing the frequency of insert changes. Geometry and dimensions that support accurate turning Engineered as an ISO DNMG rhombic insert with a 55° main cutting angle and a 0.8 mm corner radius, the geometry offers a compromise between surface finish and edge strength. The 6.35 mm plate thickness contributes to rigidity and vibration damping, aiding dimensional stability during external and internal turning operations. The relief angle is specified as 0°, and the insert features a cylindrical locating hole for secure clamping. These measurable characteristics simplify process planning and make it straightforward to select a matching holder and clamping set. Flexible system integration and efficient indexation As a double-sided insert with an optimised chipbreaker, the component supports economical use through indexation and re‑use of the second cutting edge. The double-sided chipbreaker design assists chip control for a range of stainless steel grades, while the cylindrical hole eases precise seating in standard ISO DNMG-compatible holders. System assembly comprises the insert, suitable outer holder or boring bar, a shim or clamping kit and replacement screws, ensuring straightforward installation and interchangeability within established tool systems. Contact Metav Werkzeuge today to discuss the Tungaloy DNMG 150608 AH6225 insert for stainless steel turning and to receive tailored application recommendations Technical data Article number: 6825540 Manufacturer article number: 6825540 Manufacturer SKU: TUN6825540 SKU: 6825540-Tungaloy Core data Corner radius: 0.8 mm Inscribed circle / size: 15 mm Thickness: 6.35 mm Included angle: 55° Relief angle: 0° Special features Material: PVD-coated carbide (grade AH6225) Application: turning (external and internal), stainless steel Chipbreaker: double-sided Plate form: rhombic Hole: with cylindrical hole System: ISO-DNMG format, compatible with matching holders and clamping kits FAQ Is this insert suitable for machining stainless steel? The DNMG 150608 AH6225 insert is formulated for stainless steel machining; the AH6225 grade and PVD coating combine to reduce built-up edge and provide robust edge life under varying cutting conditions. Which holder types are compatible with this insert? Compatibility follows the ISO DNMG format; holders and boring bars that match the insert form, relief angle, tolerance class, fastening method, size and thickness will be suitable for use with the DNMG 150608 AH6225. Can both cutting edges be used and indexed? Yes, the insert is double-sided and intended for indexation; the second edge can be used after rotation, offering cost-efficient utilisation of the part life. How does the 0.8 mm corner radius affect the finish and tool life? A 0.8 mm corner radius balances surface finish and edge strength: it improves edge robustness for interrupted cuts while still supporting acceptable surface quality on turned components. What is the coating and substrate material of the insert? The insert is made of carbide substrate and finished with a PVD coating, supplied in grade AH6225 for universal use on stainless steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
Take advantage of a combination of PVD-coated carbide durability, a sharp but stable cutting edge tailored for rostfreier Stahl, and ISO compatibility for efficient turning operations; order through Metav Werkzeuge or consult the technical team for application advice. DNMG150608 AH6225 Tungaloy turning insert — ISO turning insert, 55° rhombic DNMG150608 AH6225 is an ISO rhombic turning insert engineered for external and internal turning, optimised for rostfreier Stahl machining and medium cutting conditions ISO rhombic DNMG form, 55° cutting angle PVD-coated carbide AH6225 for rostfreier Stahl Double-sided chipbreaker for versatile turning Cylindrical hole for secure clamping Consistent edge performance for productive rostfreier Stahl turning The PVD-coated carbide grade AH6225 delivers a balance of a sharp cutting edge and robust cutting-edge stability, designed specifically for machining rostfreier Stahl under varying conditions. The combination of coating and substrate reduces flank wear and supports repeatable part quality during medium-duty turning, translating into fewer tool changes and higher uptime. The 0° clearance angle and 55° geometry of the rhombic insert help maintain stable cutting engagement on external and internal contours, while the 0.8 mm corner radius offers improved edge strength for interrupted cuts and light finishing passes. Simplified tool matching and secure clamping to speed setup As an ISO turning insert, compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening, size and thickness; this insert aligns with standard DNMG holders. The 6.35 mm plate thickness and 15 mm inscribed circle provide solid support in common outer holders or boring bars. The cylindrical hole design ensures reliable clamping and repeatable seating, reducing setup time and the risk of misalignment. By selecting a known ISO format, machine shops streamline tool inventory management and maintain predictable process parameters across batches. Reliable chip control and operational economy The double-sided chipbreaker is configured for general-purpose turning, promoting consistent chip shaping and evacuation in a range of feeds and depths of cut. The PVD coating enhances resistance to built-up edge formation on rostfreier Stahl, extending tool life and helping to preserve surface finish. For operations that alternate between semi-finishing and finishing, this insert provides a pragmatic compromise between cutting-edge sharpness and longevity, supporting shorter machining cycles and fewer interruptions for tool changes. The result is measurable process efficiency and improved part consistency. For tailored advice on using the Tungaloy DNMG150608 AH6225 insert for rostfreier Stahl turning, contact Metav Werkzeuge for application support and order guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6890552 Manufacturer SKU: TUN6890552 Model series: ISO-Drehwendeschneidplatten Material: Carbide Coating: PVD-coated Grade: AH6225 Intended application: Turning Facts Cutting angle: 55° Corner radius: 0.8 mm Plate thickness: 6.35 mm Inscribed circle / size: 15 mm Clearance angle: 0° Special features Rhombic insert, DNMG form Double-sided chipbreaker Cylindrical hole for clamping Universal grade for rostfreier Stahl ISO-compatible turning insert system FAQ What materials is this insert suitable for? The DNMG150608 AH6225 insert is optimised for rostfreier Stahl and performs well in medium cutting conditions; the PVD-coated carbide composition supports machining of that material. Is the insert compatible with standard DNMG holders? Yes, the insert follows ISO DNMG form and is compatible with holders that match the DNMG150608 geometry, thickness and fastening style. How does the AH6225 grade support machining stability? The AH6225 PVD-coated carbide offers a balance between a sharp edge and wear resistance, helping the insert maintain dimensional stability and surface finish during medium turning operations. Can this insert be used for both external and internal turning? The geometry and 55° rhombic form of the DNMG150608 make it suitable for both external and internal turning tasks when paired with the appropriate holder or boring bar. How many cutting edges are available per insert? This is a double-sided insert with multiple usable edges; refer to the insert indexing procedure for the exact number of re-usable edges. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
The combination of an AH6225 PVD-coated carbide grade and a DNMG 55° geometry provides reliable cutting performance and consistent chip control for medium turning of stainless steels; order the inserts directly via Metav Werkzeuge or request tailored advice from the consultants for optimal holder pairing. DNMG 150608 AH6225 turning insert by Tungaloy — PVD‑coated carbide for stainless steels DNMG150608 AH6225 Tungaloy turning insert offering ISO‑standard indexable geometry for external and internal turning applications, designed for stable cutting and adaptable chip control ISO rhombic DNMG 55° geometry PVD-coated carbide AH6225 Designed for stainless steels Double-sided chipbreaker, cylindrical hole Consistent cutting performance with a wear‑resistant grade The combination of a PVD‑coated carbide substrate and the AH6225 grade delivers a balance between edge sharpness and robustness, tailored for the demands of machining stainless steels under variable conditions. The coating reduces flank wear and helps maintain a sharp cutting edge during medium cutting operations, which improves component consistency over multiple tool indexings. By choosing a coating and grade matched to the workpiece, the risk of built‑up edge is reduced and surface finish becomes more predictable, supporting higher process stability and lower scrap rates. Geometry tuned for versatility and secure clamping The rhombic DNMG 55° form with a 0° clearance and a 0.8 mm corner radius provides a versatile cutting profile suitable for both finishing and light roughing passes. The insert is double‑sided, enabling economical indexable use, and the cylindrical hole ensures precise seating and repeatable clamping in compatible holders. As the insert conforms to ISO dimensions, integration into existing tool systems is straightforward, but compatibility must be checked for form, relief angle, tolerance class, fastening type, size and thickness to ensure correct fit and secure operation. System benefits: predictable results and reduced downtime Using an ISO standard insert such as this supports modular tool planning and predictable changeover routines. The insert’s stable cutting edge and effective chip control help to reduce unplanned stoppages and allow for longer, more productive tool life per index, thereby improving overall productivity. Where repeatability is essential, selecting the right combination of holder, shim and clamping kit based on the insert’s dimensions and hole style will help to preserve cutting geometry and ensure consistent part quality across batches. Practical recommendations for successful turning Apply these inserts for external and internal turning where stainless steels are the primary material. The double‑sided chipbreaker offers flexibility; select the chipbreaker style and grade according to component rigidity, cutting depth and the chosen feed rate. For less rigid setups, prefer more conservative feeds and ensure stable clamping of the workpiece and toolholder. If process windows are uncertain, consult tooling specialists to match holder stability and cutting data to the AH6225 grade for optimised results. Contact Metav Werkzeuge for application support and ordering of Tungaloy DNMG150608 AH6225 turning inserts; technical advice and availability can be requested via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: 6947093 Manufacturer SKU: TUN6947093 SKU: 6947093-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: DNMG150608 AH6225 Tungaloy-Wendeplatte Facts Corner radius: 0.8 mm Geometry angle: 55° Clearance angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Special features PVD-coated carbide (AH6225) Universal grade for stainless steels Rhombic DNMG shape Double-sided chipbreaker Cylindrical hole for clamping ISO-standard indexable turning insert Suitable for external and internal turning FAQ What materials is this insert designed for? The DNMG150608 AH6225 Tungaloy turning insert is formulated primarily for stainless steels, offering a balance of edge sharpness and durability for medium machining tasks. How does the AH6225 grade affect machining performance? AH6225 is a PVD‑coated carbide grade providing enhanced wear resistance and improved chip control in varying conditions, which helps maintain surface quality and tool life during medium turning. Is the insert compatible with existing ISO DNMG holders? Yes; the insert follows ISO dimensions, but compatibility depends on matching form, relief angle, tolerance class, fastening type, size and thickness of the holder and clamping kit. What are the benefits of the double‑sided design? The double‑sided construction increases economy per insert by offering two usable cutting edges, reducing tooling costs per part when secure clamping and correct indexing are applied. Which machining tasks suit the 55° rhombic geometry best? The 55° rhombic geometry is versatile for both finishing and light roughing operations and is particularly useful where a compromise between access and edge strength is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH6225 grade and the 0.8 mm corner radius to achieve stable cutting and consistent surface quality in medium turning operations; the ISO geometry and cylindrical hole ensure straightforward compatibility with standard holders. Order the DNMG150608 insert directly via Metav Werkzeuge or consult our specialists for mounting and application guidance. DNMG150608 AH6225 Tungaloy turning insert — 55° rhombic, 0.8 mm radius The DNMG150608 AH6225 is an ISO‑standard rhombic indexable insert for external and internal turning, designed for medium cutting when machining rostfreier Stahl. *DNMG150608 format, ISO‑standard *PVD‑coated carbide grade AH6225 *0.8 mm corner radius for precise finishes *Double‑sided chipbreaker, cylindrical hole Consistent surface quality under variable conditions The PVD‑coated AH6225 grade combines a sharp, yet stable cutting edge with wear resistance to maintain finish quality across changing cut parameters. As a cemented carbide insert with a defined corner radius 0.8 mm, it reduces edge chipping and supports predictable tool life during medium turning passes. The coating improves heat resistance and adhesion, which helps to sustain cutting performance when processing rostfreier Stahl; this results in fewer interruptions and a steadier production rhythm. Secure clamping and universal holder compatibility Designed as an ISO turning plate in the DNMG family, the insert features a cylindrical hole and standard form that match common clamping systems. The rhombic 55° geometry and 6.35 mm plate thickness contribute to stable seating in the toolholder and uniform load distribution, lowering the risk of vibration. Clearances and tolerance classes determine fit; choosing the correct holder form and screw ensures repeatable positioning and simplifies indexable insert changes on the shop floor. Versatile chip control and application benefits The double‑sided chipbreaker arrangement supports effective chip formation and evacuation during both external and internal turning. For medium machining strategies in rostfreier Stahl, the combination of chip geometry and PVD coating reduces built‑up edge and improves surface integrity, meaning fewer secondary operations. This insert is suitable for general turning tasks where a balance of edge life and surface finish is required, enabling flexible process planning across small to medium batch sizes. For reliable performance in rostfreier Stahl turning applications, request Tungaloy DNMG150608 AH6225 inserts from Metav Werkzeuge and obtain tailored application advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Product identifiers Manufacturer article number: 6796307 SKU: 6796307-Tungaloy Manufacturer SKU: TUN6796307 Article name: DNMG150608 AH6225 Tungaloy turning insert Facts Corner radius: 0.8 mm Plate thickness: 6.35 mm Inscribed circle/size: 15 mm Approach/lead angle: 55° Clearance angle: 0° Special features Material: cemented carbide Coating: PVD, grade AH6225 Plate shape: rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double‑sided Series: ISO turning indexable inserts Application: turning Suitable for: rostfreier Stahl FAQ What types of operations is this insert intended for? The DNMG150608 AH6225 insert is intended for external and internal turning operations, offering a balance between edge life and surface finish for medium machining of rostfreier Stahl. Which materials can be machined with this grade? Grade AH6225 on a PVD‑coated cemented carbide substrate is formulated for use on rostfreier Stahl and provides stable cutting behaviour under varying conditions. How does the DNMG geometry affect toolholding? The DNMG rhombic form and cylindrical hole give standard compatibility with ISO toolholders; the 55° approach angle and 6.35 mm thickness support stable seating and predictable clamping performance for secure mounting. What is the benefit of the double‑sided chipbreaker? The double‑sided chipbreaker on the DNMG150608 helps control chip formation and evacuation, reducing built‑up edge and improving surface integrity during turning of rostfreier Stahl. How is the corner radius specified and why does it matter? The corner radius is 0.8 mm; this radius balances edge strength and finish quality, lowering the risk of chipping while enabling good surface results in medium cutting applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
Combining a PVD-coated AH6225 grade with a stable 55° rhombic form and a 0.8 mm corner radius results in a reliable insert for medium-duty turning in rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult their experts for the optimal chipbreaker and holder match. DNMG150608 AH6225 ISO turning insert — rhombic 55° by Tungaloy A DNMG150608 AH6225 ISO-standard indexable insert for external and internal turning, optimised for rostfreier Stahl and medium cutting conditions. ISO rhombic 55° geometry PVD-coated carbide AH6225 Designed for rostfreier Stahl Double-sided chipbreaker, with hole Predictable medium-duty performance for stainless applications The rhombic 55° geometry and the AH6225 PVD-coated carbide grade combine to deliver a balance between a sharp cutting edge and robust edge retention. This configuration is especially suited to machining rostfreier Stahl where workpiece variability and moderate cutting parameters prevail. The 0.8 mm corner radius provides a durable edge that reduces the risk of premature chipping while maintaining acceptable surface finish; the coating enhances wear resistance and contributes to more consistent tool life under fluctuating conditions. Clear system compatibility and simple integration Compatibility with clamping systems is determined by shape, clearance angle, tolerance class, fastening method, size and thickness — all standardised for ISO inserts. The DNMG150608 AH6225 integrates into conventional ISO external holders or boring bars when matched with the correct shim and clamping set. The insert’s cylindrical hole and standard thickness of 6.35 mm facilitate secure fastening and repeatable seating, helping to reduce setup time and ensure reproducible performance across tool changes. Engineered chip control and stable cutting behaviour A double-sided chipbreaker tailored for general turning supports predictable chip formation and evacuation during common turning operations. Selecting the appropriate chipbreaker in conjunction with the AH6225 grade reduces built-up edge and improves surface integrity on rostfreier Stahl. The 0° relief angle combined with the insert’s geometry helps maintain an even distribution of cutting forces, which is beneficial for dimensional stability and prolongs the life of both the insert and the clamping assembly. Practical selection advice and system considerations When choosing this insert, pair it with a holder whose seat and tolerance match the ISO geometry to ensure full contact and correct cutting geometry. For a complete cutting system, combine the insert with a compatible external holder or boring bar, an appropriate backing shim and spare clamping screws; this modular approach supports fast insert changes and limits downtime. The product’s ISO conformity simplifies selection and cross-referencing with existing tool inventories. For tailored guidance on selecting the correct chipbreaker, holder and cutting parameters for the DNMG150608 AH6225, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance. Technical data Article number: 6825551 Manufacturer SKU: TUN6825551 Model series: ISO-Drehwendeschneidplatten Designation: DNMG150608 AH6225 Tungaloy-Wendeplatte Numbers / Core technical data Corner radius: 0.8 mm Included angle: 55° Relief angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Designs / Special features Material: carbide Coating: PVD, grade AH6225 Shape: rhombic (55°) Chipbreaker: double-sided Hole: cylindrical hole Typical application: external and internal turning System requirements: holder, backing shim/clamping set, replacement screws FAQ What materials is this insert intended for? This DNMG150608 AH6225 insert is formulated primarily for rostfreier Stahl; the AH6225 grade and PVD coating give a balance of sharpness and wear resistance suitable for such materials. Which holders are compatible with this ISO insert? Compatibility is determined by ISO geometry; the insert fits ISO-standard external holders and boring bars that accept DNMG 150608-format inserts when the holder seat, tolerance and fastening match the insert form. How does the chipbreaker affect machining performance? The double-sided chipbreaker on this insert promotes predictable chip formation and evacuation, improving surface finish and reducing the likelihood of built-up edge on rostfreier Stahl. Can the insert be used for internal boring as well as external turning? Yes, the ISO-format DNMG150608 AH6225 is suitable for both external and internal turning when mounted in an appropriate boring bar or holder designed for the insert size and thickness. What are the key dimensions to check when replacing an insert? Check the corner radius (0.8 mm), plate thickness (6.35 mm), plate size (15 mm) and the 55° rhombic form to ensure the replacement matches the holder and maintains correct cutting geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of an AH6225 PVD-coated carbide grade, a sharp yet stable cutting edge, and ISO conformity for consistent turning performance; order through Metav Werkzeuge for reliable supply or consult our advisors for application support. DNMG150608 AH6225 indexable turning insert for turning — Tungaloy The DNMG150608 AH6225 is an ISO-standard indexable turning insert designed for external and internal turning, optimised for stainless steels and medium-duty operations. PVD-coated carbide grade AH6225 for stainless steels Rhomboid form with 55° lead angle 0.8 mm corner radius for edge strength Cylindrical hole, double-sided chipbreaker Consistent cutting performance for stainless steel turning The insert delivers predictable results under varying conditions thanks to the AH6225 PVD-coated carbide grade, which balances toughness and wear resistance. The coating reduces built-up edge and improves tool life in challenging stainless steel machining, while the base carbide provides the necessary edge stability for mid-range cutting parameters. This combination yields fewer tool changes and steadier cycle times, contributing to measurable production efficiency. Geometry that supports reliable part quality A rhomboid form with a 55° lead angle and a 0° relief angle enables versatile positioning for both external and internal operations, improving access to diverse contours. The 0.8 mm corner radius offers an optimum compromise between strength and finish: it resists chipping on interrupted cuts while still allowing fine surface quality under controlled feeds. Where surface finish or dimensional consistency matters, this geometry helps reduce rework and maintain tolerances. Practical system compatibility and handling Designed as an ISO-indexable turning insert, the plate is compatible with compliant holders when matched by form, relief, tolerance class, fastening, size and thickness. The cylindrical hole and standard dimensions (15 mm size, 6.35 mm thickness) make fixture selection straightforward and reduce set-up errors. The insert’s double-sided chipbreaker extends usable edges per index and supports efficient chip control during typical turning operations. What the grade and chipformer mean in practice The AH6225 grade is a universal choice for stainless steels, optimised to maintain a sharp cutting edge while resisting premature wear. The double-sided chipbreaker design assists in forming manageable chips across common feed and depth ranges, reducing downtime associated with chip entanglement. Operators benefit from clear, repeatable behaviour at moderate speeds — an asset for small-batch work and mixed-production environments. Integrating the insert into production workflows Using ISO-standard plates such as this one simplifies inventory and tool-change routines: the geometry and hole style ensure straightforward mounting, while the PVD coating reduces frequency of edge failure. For production planning, this means lower tool consumption and more predictable maintenance cycles. If machining parameters change, the insert’s balanced properties allow a moderate window of adjustment without immediate tool replacement. For technical enquiries or to secure delivery of Tungaloy indexable inserts, contact Metav Werkzeuge for tailored advice and prompt processing at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947122 Manufacturer SKU: TUN6947122 SKU: 6947122-Tungaloy Model series: ISO indexable turning inserts Geometry designation: DNMG150608 Dimensions & numbers Plate size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Lead angle: 55° Relief angle: 0° Features & applications Material: carbide Coating / grade: AH6225 (PVD-coated) Form: rhomboid Hole: with cylindrical hole Chipformer: double-sided Typical application: external and internal turning of stainless steels Compatibility: ISO-standard holders (match by form, relief angle, tolerance, fastening, size and thickness) FAQ What materials is this insert suited for? The DNMG150608 AH6225 insert is primarily intended for stainless steels, with the AH6225 grade offering a balanced combination of wear resistance and edge stability for medium-duty turning. How is chip control achieved with this insert? Chip control is supported by the double-sided chipbreaker which is integrated into the insert geometry; this promotes short, manageable chips across common feed ranges for turning operations. What are the key dimensions to consider when selecting a holder? Important dimensions are the plate size (15 mm), thickness (6.35 mm) and the cylindrical hole style; holders must match the ISO form, relief angle, tolerance class, fastening method, size and thickness. Can this insert be indexed to use both sides? Yes, the insert is double-sided, offering two usable cutting positions, which helps to extend tool life and reduce tooling costs per part. Does the AH6225 grade require special cutting parameters? The AH6225 grade is designed for universal use in stainless steels under moderate cutting conditions; standard recommendations from tooling guides apply, but consult process engineers for optimised feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that balances a sharp, stable cutting edge with wide applicability to rostfreier Stahl, combined with a compact 55° rhombic geometry and a 0.8 mm corner radius for reliable turning performance; order the insert directly via Metav Werkzeuge or contact the consultants for tailored recommendations. DNMG 150608 AH6225 turning insert — PVD-coated carbide, 55° rhombic by Tungaloy The DNMG150608 AH6225 is an ISO rhombic indexable insert designed for general turning applications, optimised for machining rostfreier Stahl with a robust, PVD-coated carbide grade. PVD-coated carbide grade AH6225 Universal for rostfreier Stahl machining 55° rhombic geometry for versatile turning Double-sided insert with cylindrical hole Reliable cutting results for rostfreier Stahl and mixed conditions The combination of a PVD-coated surface with a wear-resistant carbide substrate in grade AH6225 delivers a balance between a sharp cutting edge and edge stability under varying cutting forces. This makes the insert particularly suited to medium cutting depths and interrupted cuts often encountered when machining rostfreier Stahl. The coating reduces built-up edge formation and enhances thermal resistance, which in turn improves process stability and extends the effective edge life. Engineers can expect consistent part quality even when feed rates or material batches vary. Secure clamping and enhanced rigidity for repeatable cycles The rhombic 55° geometry combined with a 6.35 mm plate thickness increases stiffness at the cutting zone, reducing vibration and improving surface finish during both external and internal turning. The cylindrical hole and ISO-compliant form ensure straightforward integration with established holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The double-sided design allows economical indexing while the 0.8 mm corner radius supports stable edge engagement and helps maintain dimensional control on turned components. System-level advantages that reduce downtime and raise productivity Used within a complete ISO system—insert, matching external holder or boring bar, clamp pad and replacement screw—the part is straightforward to fit and replace, enabling fast tool changes and minimal machine downtime. The universal character of the AH6225 grade simplifies tool inventory management for workshops that primarily machine rostfreier Stahl, while the PVD technology contributes to longer intervals between regrinds or replacements. For procurement and process planning this means fewer interruptions, predictable tool performance and more consistent batch throughput. Contact Metav Werkzeuge for technical advice on ordering DNMG150608 AH6225 Tungaloy turning inserts and to ensure the best holder compatibility for the intended application Technical data Article number: 6947152-Tungaloy Manufacturer article number: 6947152 Manufacturer SKU: TUN6947152 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Numbers / core technical data Corner radius: 0.8 mm Plate thickness: 6.35 mm Inscribed circle / size: 15 mm Geometry angle: 55° Clearance angle (freiwinkel): 0° Designs / special features Material: Carbide (Hartmetall) Coating: PVD Grade/sorte: AH6225 Plate shape: Rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning ISO designation: DNMG150608 FAQ What materials is this insert suitable for? The insert is designed as a universal grade for machining rostfreier Stahl; the AH6225 PVD-coated carbide balances edge sharpness and stability for such applications. What does the DNMG150608 designation indicate? The DNMG150608 ISO designation identifies the rhombic plate form, inscribed circle and geometry; DNMG150608 AH6225 denotes the specific size and the AH6225 grade for turning tasks. How does the 55° geometry affect machining? A 55° geometry provides versatility for both external and internal turning, improving access in confined features while maintaining stable cutting engagement for consistent surface finish. Is the insert compatible with standard ISO holders? Compatibility is determined by form, clearance angle, tolerance class, fastening and thickness; the insert follows ISO norms and uses a cylindrical hole for secure mounting in ISO-compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6225 Wendeplatten - Tungaloy
Benefit from a universal, PVD-coated AH6225 grade that combines a sharp, stable cutting edge with reliable chip control for consistent stainless-steel turning. Order the DNMG150608 AH6225 Tungaloy turning insert directly via Metav Werkzeuge or consult our specialists for application support. DNMG150608 AH6225 Tungaloy turning insert — PVD-coated carbide, 55° rhombic The DNMG150608 AH6225 is an ISO-format rhombic indexable insert designed for external and internal turning, optimised for machining stainless steels under changing conditions. Universal PVD-coated carbide AH6225 ISO DNMG 150608 rhombic form 55° 0.8 mm corner radius for versatile turning Double-sided chipbreaker, with cylindrical hole Consistent results on stainless steels through advanced coating and grade The combination of a PVD-coated surface and the AH6225 carbide composition delivers a sharp cutting edge with increased resistance to adhesion and wear when machining stainless steels. The coating reduces friction and helps prevent a built-up edge, which in turn supports a consistent surface finish and longer tool life under medium-duty cutting. For production environments with variable workpiece conditions, this blend of sharpness and stability maintains process reliability and reduces scrap rates. Geometry designed for reliable chip control and predictable tool life The DNMG rhombic shape with a 55° cutting angle and a 0.8 mm corner radius balances edge strength and accessibility for common turning profiles. The integrated double-sided chipbreaker promotes controlled chip formation and evacuation, reducing the risk of tangling and tool nose damage. A cylindrical hole ensures repeatable clamping and accurate seating in compatible holders, while the 6.35 mm plate thickness provides torsional stability during interrupted cuts. In practice, this geometry translates into fewer tool changes and steadier cycle times. ISO compatibility and economical system use for workshop efficiency As an ISO-format insert, the DNMG150608 fits a wide range of standard holders; compatibility is governed by form, relief angle, tolerance class, fastening method, size and thickness. Using an ISO-compliant indexable insert simplifies inventory and enables quick replacements during shift changes. The double-sided concept further increases value by offering two usable cutting edges per index, improving cost-efficiency per edge and reducing tooling expenditure over the production run. For technical advice on integrating the Tungaloy AH6225 inserts into existing tool systems or to secure stock of the DNMG150608, contact Metav Werkzeuge for application guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6825700-Tungaloy Manufacturer SKU: TUN6825700 Manufacturer article number: 6825700 Product name: DNMG150608 AH6225 Tungaloy turning insert Material: Carbide Facts ISO code: 150608 Shape: Rhombic, 55° Corner radius: 0.8 mm Relief angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Hole style: Cylindrical hole Chipbreaker: Double-sided Special features PVD coating Grade: AH6225 (universal for stainless steels) Application: Turning (external and internal) ISO-format indexable insert Compatible with ISO DNMG holders Two usable cutting edges per side (double-sided) FAQ What materials is this insert optimised for? The DNMG150608 AH6225 insert is optimised for stainless steels and is engineered to provide a stable cutting edge and good surface finish under medium machining conditions. Can this insert be used for both external and internal turning? Yes, the ISO rhombic geometry and 55° approach make the insert suitable for both external and internal turning operations in compatible holders. How does the PVD coating benefit machining performance? The PVD-coated surface reduces friction and adhesion on the cutting edge, enhancing wear resistance and minimising built-up edge formation during stainless-steel machining. Is the DNMG150608 compatible with standard tool holders? The DNMG150608 follows ISO specifications; compatibility depends on holder form, relief angle, tolerance class, fastening and thickness, so it fits standard DNMG holders when parameters match. How does the double-sided chipbreaker affect operating costs? The double-sided chipbreaker provides reliable chip control and two usable cutting faces per side, increasing the number of indexings and improving cost-efficiency per cutting edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of durable PVD-coated carbide, a robust double-sided chipbreaker, and ISO conformity for reliable turning in stainless steels; order the DNMG150608 AH6235 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150608 AH6235 indexable turning insert — PVD carbide, 55° geometry (Tungaloy) The DNMG150608 AH6235 is an ISO-standard indexable turning insert designed for external and internal turning, optimised for stainless steels and interrupted cutting where edge robustness is required. PVD-coated carbide AH6235 for stainless steels 55° rhombic insert with 0.8 mm corner radius Double-sided chipbreaker for interrupted cuts ISO DNMG150608, 6.35 mm thickness, with hole Improved tool life and consistent chip control for stainless steels The combination of a PVD coating and a tougher carbide grade (AH6235) increases wear resistance and reduces the risk of edge fracture when machining stainless steels. This results in more consistent tool life and fewer unplanned tool changes, which supports predictable production cycles. The coating reduces adhesion and built-up edge, while the substrate material absorbs impact during interrupted cuts, delivering measurable uptime benefits. Predictable clamping and dimensional stability for quicker setups Built to the ISO DNMG specification, the insert’s rhombic 55° geometry and 0.8 mm corner radius ensure reliable seating and repeatable positioning in compatible holders. The 6.35 mm thickness and cylindrical hole allow secure fixation and accurate tolerance control, which simplifies changeovers and reduces setup time. These features translate directly into lower process variation and improved surface finish consistency. Practical performance in everyday turning operations Designed for both external and internal turning, the indexable insert with a double-sided chipbreaker offers two usable cutting edges and balanced chip formation for interrupted or unstable cuts. The term “chipbreaker” refers to the groove geometry that controls swarf shape; in this case it promotes short, controllable chips that protect the edge and the workpiece. Selecting this insert with its PVD-coated carbide grade is particularly advantageous where edge stability and reduced emissions of built-up edge are priorities. Choose Tungaloy’s AH6235 inserts for robust stainless-steel turning and contact Metav Werkzeuge for application advice and availability of DNMG150608 Technical data Manufacturer SKU: 6885972-Tungaloy Manufacturer article number: 6885972 Model series: ISO-Drehwendeschneidplatten Facts Designation: DNMG150608 Grade/coating: AH6235, PVD-coated carbide Thickness: 6.35 mm Insert size: 15 (mm) Corner radius: 0.8 mm Geometry angle: 55° Special features Insert shape: rhombic Hole: with hole, cylindrical hole Free angle: 0° Chipbreaker: double-sided Application: turning; suitable for external and internal turning; intended for interrupted cuts and stainless steels FAQ What materials is this insert suited for? The DNMG150608 AH6235 insert is formulated for stainless steels and applications with increased risk of edge breakout; the tougher AH6235 grade improves edge security. How does the PVD coating affect performance? A PVD coating provides a hard, wear-resistant surface that reduces adhesion and improves resistance to abrasion and heat, extending the effective tool life of the carbide insert. Can this insert be used for interrupted cuts? Yes, the double-sided chipbreaker and the AH6235 grade make this insert suitable for interrupted cutting, providing stable cutting behaviour and reduced chipping. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius offers increased edge strength for roughing or unstable conditions while still providing acceptable surface quality; smaller radii yield finer finishes but are less robust. Is the DNMG150608 compatible with standard ISO holders? The insert follows the ISO DNMG specification; compatibility depends on holder form, clearance, tolerance class, fastening and thickness—holders designed for DNMG150608 will accept this insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6235 Wendeplatten - Tungaloy
DNMG 150608 AH6235 Wendeplatte (ISO-Drehwendeschneidplatte) von Tungaloy Die DNMG 150608 AH6235 ist eine ISO-genormte Wendeplatte zum Drehen, entwickelt für rostfreie Stähle und unterbrochene Schnitte mit hoher Prozesssicherheit. PVD-beschichtetes Hartmetall für längere Standzeit Zähere AH6235-Sorte für rostfreie Stähle Rhombische Plattenform, 55° Schneidwinkel Doppelseitiger Spanbrecher, beidseitig nutzbar Zylindrisches Loch für sichere Befestigung Dauerhafte Produktivität durch robuste Sorte und Beschichtung Die Kombination aus PVD-Beschichtung und der zäheren AH6235-Sorte sorgt für stabile Spanbildung bei der Bearbeitung von rostfreien Stählen. Dadurch reduziert sich der Werkzeugwechsel, was die Maschinenlaufzeit erhöht und Rüstkosten senkt. Die zähere Werkstoffauslegung minimiert Ausbruchgefahr bei unterbrochenen Schnitten; das Ergebnis ist eine höhere Gesamteffizienz im Fertigungsprozess. Präzise Geometrie für saubere Oberflächen und Formtreue Die rhombische Form mit 55° Schneidwinkel und einem Eckenradius von 0,8 mm ermöglicht kontrollierte Spanabfuhr und eine gleichmäßige Schnittkante. Bei Außen- und Innendrehen verbessert diese Geometrie die Oberflächengüte und reduziert Vibrationen. Der Freiwinkel von 0° ist für Anwendungen mit stabiler Aufspannung optimiert und unterstützt wiederholgenaue Ergebnisse. Vielseitige Kompatibilität und einfacher Werkzeugwechsel Die DNMG150608 ist ISO-genormt und passt zu gängigen Außenhaltern und Bohrstangen; die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die 6,35 mm starke Platte mit zylindrischem Loch und doppelseitigem Spanbrecher erlaubt schnellen Wechsel und wirtschaftlichen Einsatz, da beide Schneiden genutzt werden können. Das reduziert Lagerbedarf und erhöht die Teileausbeute. Empfehlung: Für zuverlässige Zerspanung von rostfreiem Stahl die AH6235-Sorte von Tungaloy wählen und die Beschaffung über Metav Werkzeuge abstimmen – Beratung und technische Klärung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produkteigenschaften Artikelnummer: 6887284 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: DNMG150608 Hersteller SKU: TUN6887284 Daten Eckenradius: 0,8 mm Plattendicke: 6,35 mm Plattengröße: 15 mm Schneidwinkel: 55° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: PVD (physikalische Gasphasenabscheidung) Sorte: AH6235 Plattenform: rhombisch Loch: mit Loch (zylindrisches Loch) Spanbrecher: doppelseitig Anwendung: Drehen Einsatzgebiet: rostfreie Stähle, unterbrochener Schnitt, erhöhte Ausbruchgefahr FAQ Wie unterscheidet sich die AH6235-Sorte von härteren Sorten? Die AH6235-Sorte ist zäher ausgelegt und setzt daher auf robuste Schneidkanten bei der Bearbeitung von rostfreien Stählen; sie bietet bessere Bruchresistenz bei unterbrochenen Schnitten als härtere, spröde Sorten. Ist die DNMG150608 mit Standard-Außenhaltern kompatibel? Ja, die DNMG150608 ist ISO-genormt; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse und Befestigung des Halters ab. Halter mit Passung für DNMG-Platten und zylindrischem Loch gewährleisten sicheren Sitz. Welche Vorteile bringt die PVD-Beschichtung bei rostfreiem Stahl? Die PVD-Beschichtung verbessert die Verschleißfestigkeit und reduziert Adhäsion bei rostfreien Stählen, was zu längerer Standzeit und konstanter Schnittqualität führt. Kann die Platte bei unterbrochenen Schnitten eingesetzt werden? Ja, die zähere Auslegung der AH6235-Sorte ist speziell für Anwendungen mit erhöhter Ausbruchgefahr und unterbrochenen Schnitten vorgesehen. Welche Rolle spielt der Eckenradius von 0,8 mm? Der Eckenradius 0,8 mm bietet eine ausgewogene Kombination aus Stabilität der Schneide und guter Oberflächengüte, ideal für allgemeine Drehoperationen mit moderaten Schnittbedingungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 150608 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6235 grade, robust carbide substrate and a 0.8 mm corner radius for reliable machining of stainless steels; order directly via Metav Werkzeuge or consult the technical team for application support. DNMG 150608 AH6235 indexable turning insert by Tungaloy — PVD-coated carbide, rhombic 15 mm The DNMG150608 AH6235 is an ISO-standard indexable insert for external and internal turning, designed to improve performance in demanding stainless-steel applications and interrupted cuts. PVD-coated carbide AH6235 for stainless steels Rhombic 15 mm plate with 0.8 mm radius Double-sided insert with cylindrical hole ISO DNMG 150608 for external and internal turning Increased resistance to chipping for stainless-steel machining The PVD-coated AH6235 grade combines a tough substrate with a wear-resistant surface to resist crater wear and reduce micro-chipping under unstable cutting conditions. This composition is especially advantageous when machining stainless steels or when facing interrupted cuts, where edge security is critical. The coating improves thermal stability and reduces adhesion of workpiece material to the cutting edge, which in turn contributes to a more consistent surface finish and extended tool life. For production environments, this means fewer insert changes and a steadier process window, supporting higher machine utilisation and lower per-part costs. Geometry engineered for secure clamping and repeatable results The rhombic 15 mm plate form with a 0.8 mm corner radius and a 0° clearance angle is optimised for a wide range of turning tasks. The double-sided geometry and cylindrical hole ensure straightforward indexing and a compact operating envelope, while the ISO conformity simplifies holder selection. Compatibility to a holder depends on form, relief angle, tolerance class, fastening method, plate size and thickness; using the correct matched holder, support pad and fastening hardware secures repeatable seating and concentricity. Clear information on these interfaces reduces set-up time, prevents unintended runout and improves overall process reliability. Productivity gains through matched chip control and grade selection A chipbreaker adapted to component material and machining stability is essential for uninterrupted throughput. The double-sided chipbreaker on this insert provides controlled chip formation for many stainless-steel grades, improving evacuation in turning cycles and lowering the risk of snarled chips. By selecting a tougher grade for challenging materials, the cutting edge withstands higher mechanical loads and occasional impacts, so productivity is maintained even under variable conditions. For manufacturers seeking predictable batch output and reduced tooling interventions, this approach pays off in shorter cycle times and fewer stoppages. For further optimisation, Metav Werkzeuge offers application advice and matching holder recommendations to align insert choice with machine capacity and fixture rigidity. For tailored application advice or to secure supply of Tungaloy indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate support and availability Technical Data Article number: 6886291 Manufacturer SKU: TUN6886291 Model series: ISO turning indexable inserts Shape: rhombic (DNMG) Grade: AH6235 Facts Plate size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Relief/clearance angle: 0° Included hole: with cylindrical hole Insert designation: 150608 Included SKU: 6886291-Tungaloy Diameter/angle: 55° Special features Material: carbide Coating: PVD Double-sided geometry Double-sided chipbreaker ISO-standard DNMG150608 Intended application: turning (external and internal) Typical system: insert, compatible external holder or boring bar, supporting pad/clamp set and replacement screw FAQ What materials is this insert best suited for? The AH6235 grade is formulated for machining stainless steels and applications with elevated chipping risk; the insert performs well in interrupted cuts and sticky alloys. How does the plate geometry affect holder choice? The rhombic 15 mm form, 6.35 mm thickness and cylindrical hole require a matching ISO DNMG holder with compatible clamping, relief angle and tolerance to ensure repeatable seating and minimal runout. Is the insert indexed on both sides? Yes, the insert is double-sided with a double-sided chipbreaker, allowing two usable edges per index and effective chip control in many turning operations. Can this insert improve process stability in short runs? The tougher carbide substrate combined with the PVD coating increases edge security, which supports stable machining even in short-run or mixed-batch production. Which chipbreaker should be chosen for aluminium or non-ferrous alloys? Although this AH6235 grade is optimised for stainless steels, chipbreaker selection should match the workpiece material and machine stability; consult Metav Werkzeuge for a suitable alternative for aluminium or non-ferrous alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated cemented carbide, ISO compatibility and robust chip control for reliable turning of stainless steels and interrupted cuts; order the DNMG150608 AH6235 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150608 AH6235 Tungaloy indexable turning insert — PVD-coated cemented carbide, 0° relief DNMG150608 AH6235 Tungaloy insert engineered for external and internal turning, optimised for stainless steels and interrupted cuts DNMG150608 ISO indexable insert, rhombic 55° PVD-coated cemented carbide AH6235 Designed for stainless steels and interrupted cuts Double-sided chipbreaker, 0.8 mm corner radius Predictable edge life for demanding stainless applications The AH6235 grade combines a PVD-coated finish with a tougher cemented carbide substrate to reduce flank wear and resist chipping during interrupted cuts. This results in a more consistent tool life when machining stainless steels, where built-up edge and material adhesion commonly reduce process stability. The coating improves heat resistance and wear control, meaning fewer insert changes and a steadier surface finish across production runs. ISO conformity and secure clamping reduce setup risks As an ISO indexable turning insert in the DNMG150608 format, compatibility with holders is determined by form, tolerance class, size and thickness. The rhombic 55° geometry combined with a 0° relief and a cylindrical mounting hole ensures secure clamping in standard external holders or boring bars. This predictable fit reduces setup time and minimises runout-related issues, supporting repeatable machining and faster changeovers in mixed production environments. Enhanced chip control and strength for uninterrupted throughput The double-sided chipbreaker design and a 0.8 mm corner radius deliver controlled chip formation and edge strength, helping to avoid unexpected tool breakouts during heavy engagement or interrupted operations. For both external and internal turning tasks, this insert supports stable cutting forces and improved surface integrity. Selecting the appropriate chipbreaker and grade tailored to the workpiece material and machining stability pays off through reduced downtime and lower tooling consumption. For advice on selecting holders, chipbreakers or machining parameters for AH6235 inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and supply options Technical Data Article number: 6892183 Manufacturer SKU: TUN6892183 Model series: ISO indexable turning inserts Designation: DNMG150608 AH6235 Tungaloy-Wendeplatte Numbers / Core technical data Corner radius: 0.8 mm Plate thickness: 6.35 mm Plate size: 15 mm Insert angle: 55° Relief angle: 0° Special features / Versions Material: cemented carbide Coating / grade: AH6235 (PVD-coated) Shape: rhombic Chipbreaker: double-sided Mounting: with cylindrical hole Typical application: turning; suitable for stainless steels and interrupted cuts FAQ What materials is this insert best suited for? The DNMG150608 AH6235 Tungaloy insert is optimised for stainless steels and applications with interrupted cuts, where its tougher PVD-coated grade helps prevent chipping. Can the insert be used for both external and internal turning? Yes, the insert format and rhombic 55° geometry allow use in standard external holders and appropriate boring bars for internal turning. How does the AH6235 coating affect performance? The PVD coating increases heat and wear resistance, improving edge life and surface finish when machining stainless steels and other difficult-to-machine alloys. Is this insert reversible or single-use? The insert is double-sided with a double-sided chipbreaker, enabling indexable use; when one edge is worn, the insert can be rotated to a fresh cutting edge as per standard practice. What does the 0.8 mm corner radius mean for machining? A 0.8 mm corner radius provides a balance between edge strength and finish: it increases resistance to chipping while still delivering a good surface quality for general turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH6235 grade and a 55° rhombic geometry to improve edge stability and reduce downtime; order directly via Metav Werkzeuge or consult their team for holder compatibility and spare parts. DNMG150608 AH6235 Tungaloy turning insert — 55° rhombic, PVD-coated carbide The DNMG150608 AH6235 is an ISO-standard turning insert for external and internal turning, engineered for interrupted cuts and demanding work on rostfreier Stahl. ISO rhombic form, 55° cutting angle PVD-coated carbide AH6235 for toughness Double-sided chipbreaker, cylindrical hole Consistent cutting performance under interrupted cutting conditions The DNMG150608 AH6235 insert combines a PVD-coated surface with a robust carbide substrate to deliver reliable performance where chips and impact are challenging. The AH6235 grade is formulated for increased toughness and resistance to edge breakouts, which is particularly beneficial when machining rostfreier Stahl or when interruptions occur in the cut. The PVD-coated layer enhances wear resistance while maintaining substrate support, resulting in a stable cutting edge and improved tool life under variable loads. Straightforward integration into ISO-compatible tool systems Designed as part of an ISO-standard insert family, compatibility with holders is determined by form, free clearance, tolerance class, fastening method, size and thickness. The rhombic 55° geometry and 6.35 mm plate thickness ensure easy matching with common external holders or boring bars. Where specified, use the supplied shim and clamping kit dimensions consistent with ISO norms to achieve repeatable seating and secure clamping, supporting consistent chip formation and dimensional accuracy in production environments. Reduced changeovers and steady productivity through design The insert’s double-sided chipbreaker allows multiple indexing positions before replacement is required, lowering tool-change frequency and associated downtime. A corner radius of 0.8 mm provides a balance between edge strength and surface finish, so a single insert can address light finishing and more robust feeds without compromising edge stability. Choosing the correct chipbreaker/profile for the intended feed and depth of cut will further enhance chip control and surface quality while protecting the cutting edge from thermal and mechanical shock. Practical setup advice to maximise process reliability When specifying a setup, pair the insert with a rigid holder compatible with the DNMG150608 dimensions and a clamping system rated for the expected cutting forces. The 55° lead angle influences cutting forces and chip flow; smaller radii support finer finishes, while larger radii increase edge life. A system comprising the insert, matching holder, support shim and correct fastening hardware delivers the best repeatability and reduces the risk of seating-related failures. For applications involving rostfreier Stahl or high interruption, prefer the AH6235 grade to benefit from its tailored toughness. Contact Metav Werkzeuge for tailored holder recommendations and original Tungaloy inserts to enhance process reliability Technical data Article number: 6887026 Manufacturer SKU: TUN6887026 Vendor SKU: 6887026-Tungaloy Model series: ISO turning indexable inserts Facts Insert designation: DNMG150608 Shape: rhombic, 55° Plate size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.8 mm Free clearance angle: 0° Special features Coating / grade: AH6235 (PVD-coated) Material: carbide Hole: with hole — cylindrical hole Chipbreaker: double-sided Typical application: turning; suitable for interrupted cuts and rostfreier Stahl FAQ What materials is this insert designed for? The DNMG150608 AH6235 insert is optimised for rostfreier Stahl and similar demanding alloys; the AH6235 grade offers increased toughness for interrupted cuts. Is the insert compatible with standard ISO holders? Compatibility follows ISO norms for form, size and thickness; the DNMG150608 fits holders specified for 55° rhombic inserts when the holder matches the insert’s dimensions and fastening type. How does the chipbreaker design affect performance? The double-sided chipbreaker on this insert improves chip control and allows indexing to fresh edges, enhancing productivity and reducing changeover frequency. What does the 0° free clearance angle mean in practice? A 0° free clearance angle provides a neutral clearance geometry that aids in stable support of the cutting edge; pairing with the correct holder geometry is important for achieving the intended cutting behaviour. Can the insert handle interrupted machining and impact loads? Yes, the PVD-coated AH6235 grade is formulated for higher toughness and resistance to edge breakouts, making it suitable for interrupted cuts and operations with increased breakout risk. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH6235 Wendeplatten - Tungaloy
Take advantage of PVD-coated AH6235 performance and the DNMG 150608 geometry for reliable results in turning operations; order directly via Metav Werkzeuge or consult our specialists for selection and cutting-parameter advice. DNMG 150608 AH6235 turning insert — PVD-coated carbide for turning, Tungaloy DNMG 150608 AH6235 is a precision ISO rhombic turning insert for general external and internal turning, optimised for rostfreier Stahl and interrupted cuts. PVD-coated carbide grade AH6235 Optimised for rostfreier Stahl and interrupted cuts 55° rhombic geometry with cylindrical hole Double-sided chipbreaker and 0.8 mm corner radius Consistent cutting performance with AH6235 The AH6235 grade is a PVD-coated carbide developed to handle tougher conditions commonly encountered when machining rostfreier Stahl. The coating improves abrasion resistance while the substrate maintains toughness, which together reduce the risk of edge breakouts in interrupted cuts. With a 0.8 mm corner radius and 55° rhombic geometry, the insert offers a balance between strength and finish; the geometry supports stable contact and contributes to predictable tool life. This results in fewer tool changes and steadier production throughput when facing fluctuating cutting forces. Compatibility guidance to ensure correct assembly Compatibility with holders is determined by form, relief angle, tolerance class, fastening, size and thickness. The DNMG 150608 designation corresponds to an ISO rhombic insert with a 6.35 mm plate thickness and 15 mm inscribed circle, designed to fit standard external holders or a suitable boring bar pairing. The insert’s cylindrical hole and double-sided chipbreaker facilitate secure clamping and indexability, while the 0° relief angle and specified dimensions demand matching seat geometry and clamp type. Selecting a matching holder and the correct tolerance class reduces vibration and improves surface finish. Choose the right chipbreaker and cutting strategy The chipbreaker design on both faces supports effective chip control under variable cutting conditions; using the double-sided configuration provides two usable edges per indexation. For rostfreier Stahl and interrupted cuts, favour conservative depths of cut and moderate feed to avoid thermal work hardening; the PVD layer helps at elevated temperatures but does not replace suitable cutting data. The insert’s combination of a robust substrate and coating delivers improved process reliability and a consistent surface quality with fewer reworks, particularly where sudden chip formation occurs. Why Tungaloy inserts support productive turning Tungaloy’s engineering emphasis on tool life and process stability is reflected in the insert’s material and geometry choices. The plate’s PVD-coated surface and application-oriented grade provide good wear resistance and reliable performance in demanding turning tasks. For manufacturers aiming to maintain steady throughput and reproducible part quality, this insert contributes to predictable machining cycles and lower scrap rates. The modellserie of ISO turning inserts simplifies selection within established tooling systems and supports efficient inventory management. Contact Metav Werkzeuge today for tailored advice on selecting Tungaloy AH6235 inserts for rostfreier Stahl applications and to confirm the best holder and cutting parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6881947 SKU (vendor): 6881947-Tungaloy Manufacturer SKU: TUN6881947 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Shape: rhombic ISO designation: DNMG150608 Size (inscribed circle): 15 mm Thickness: 6,35 mm Corner radius: 0.8 mm Insert angle: 55° Relief angle: 0° Hole: with cylindrical hole Special features Grade: AH6235 (PVD-coated) Chipbreaker: double-sided Typical application: Drehen (external and internal turning) Designed for interrupted cuts and higher breakout risk Passes compatibility checks for form, free angle, tolerance class and fastening FAQ What materials is this insert suitable for? The DNMG 150608 AH6235 Tungaloy turning insert is optimised for rostfreier Stahl and also performs reliably in applications with interrupted cuts and higher breakout risk. How does the AH6235 grade affect tool life? AH6235 combines a tough substrate with a PVD-coated surface to improve wear resistance; this balance extends cutting edge integrity and enhances the tool life of the DNMG 150608 insert in demanding turning operations. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; select an external holder or boring bar that matches the DNMG150608 dimensions and the specified seat geometry. What advantages does the double-sided chipbreaker provide? The double-sided chipbreaker offers two indexable edges, improved chip control and simplified inventory usage, making the DNMG 150608 AH6235 insert efficient for frequent indexing and varied cutting conditions. Is this insert suitable for finishing passes? With its 0.8 mm corner radius and PVD coating, the DNMG 150608 AH6235 insert can produce a good surface finish when used with appropriate feeds and cutting conditions for finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide and a double-sided chipbreaker for consistent tool life and predictable chip control in turning operations; order the insert directly via Metav Werkzeuge or consult the Metav Werkzeuge team for application advice. DNMG150608 AH8005 ISO turning insert — PVD-coated carbide, double-sided chipbreaker | Tungaloy The DNMG150608 AH8005 is an ISO rhombic turning insert designed for stable machining of heat‑resistant alloys and other hard materials in conventional external and internal turning applications. ISO rhombic insert DNMG150608 PVD-coated carbide grade AH8005 Double-sided chipbreaker, cylindrical hole 0.8 mm corner radius, 55° lead angle High wear resistance for demanding turning tasks The combination of PVD-coated surface treatment and a carbide substrate provides increased resistance to abrasive and adhesive wear, supporting longer tool life under high temperatures. The AH8005 grade is formulated for stable cutting of heat‑resistant alloys and hardened materials; the coating reduces friction and helps to preserve the cutting edge during sustained engagement. This results in fewer tool changes, more consistent component quality and measurable gains in process stability. Precise fit and ISO compatibility for predictable results As an ISO-standardised rhombic insert, the geometry and mounting dimensions of this plate ensure compatibility with a broad range of external holders and boring bars when the form, clearance angle, tolerance class, attachment method, size and thickness are matched. The insert’s 55° lead angle and 0° clearance angle produce a cutting geometry suited to general turning while the cylindrical hole and double-sided design enable straightforward indexing and secure clamping for repeatable positioning. Clear identification of these parameters reduces setup time and simplifies tool inventory management. Productivity through chip control and practical system setup A double-sided chipbreaker combined with a 0.8 mm corner radius gives controlled chip formation across different feeds and depths of cut, lowering the risk of built-up edge and improving surface finish. The format supports use in a complete system: an ISO turning insert together with a matching external holder or boring bar, a locating shim or clamping set and replacement screws. Choosing the correct chipbreaker and grade for material and machine stability optimises cycle time and reduces scrap, leading to a more economical machining process overall. Contact Metav Werkzeuge for availability and tailored machining advice on the Tungaloy DNMG150608 AH8005 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6741657 SKU: 6741657-Tungaloy Manufacturer SKU: TUN6741657 Model series: ISO turning inserts Designation: DNMG150608 AH8005 Tungaloy insert Facts Insert size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.8 mm Lead angle: 55° Clearance angle: 0° Hole: with hole Hole style: cylindrical hole Special features PVD-coated carbide grade AH8005 Double-sided chipbreaker Rhombic insert form ISO designation DNMG150608 Intended application: Turning Compatibility determined by form, clearance angle, tolerance class, attachment, size and thickness System components: insert, external holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suited for? The DNMG150608 AH8005 insert is optimised for heat‑resistant alloys and other hard materials; the AH8005 grade provides wear resistance suitable for demanding turning tasks. Can the insert be indexed to a second cutting edge? Yes, the insert is double‑sided and can be rotated to present a fresh edge; the cylindrical hole and compatible clamping enable secure repositioning. How does the PVD coating benefit performance? The PVD-coated layer on the AH8005 grade reduces friction, improves resistance to elevated cutting temperatures and extends usable tool life during continuous operation. Which holders are compatible with this ISO insert? Compatibility depends on matching the insert form DNMG, the 55° lead angle, the 6.35 mm thickness and the tolerance and attachment method of the holder; holders designed for ISO DNMG inserts are appropriate. Is the DNMG150608 AH8005 suitable for internal turning? Yes, the geometry and chipbreaker design allow use in internal boring when paired with a suitable boring bar; stable clamping and correct chip evacuation should be ensured. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8005, precise 55° rhombic geometry and a 0.8 mm corner radius for stable, wear-resistant turning of hard and heat-resistant alloys; order or request advice from Metav Werkzeuge for application-specific recommendations. DNMG 150608 AH8005 – Turning insert (PVD-coated carbide) by Tungaloy DNMG150608 AH8005 is an ISO-format indexable turning insert designed for external and internal turning of demanding materials where stable cutting and wear resistance are required ISO DNMG 55° rhombic geometry PVD-coated carbide AH8005 for heat-resistant alloys 0° clearance with 0.8 mm corner radius Double-sided chipbreaker, cylindrical hole High-performance cutting for demanding turning tasks The PVD-coated carbide grade AH8005 provides wear-resistant performance specifically for heat-resistant alloys and other hard materials, enabling consistent cutting under stable machining conditions. As a 55° rhombic insert with a 0.8 mm corner radius, it balances edge strength and accessibility for profile work. The coating reduces flank wear and supports longer tool life, so production runs maintain dimensional stability with fewer index changes. Reduced integration effort through standardised geometry Compatibility with toolholders depends on form, clearance angle, tolerance class, fastening and size. The ISO-format geometry of this rhombic plate simplifies selection of matching external holders and boring bars: the DNMG150608 form and 0° clearance are widely supported in commercial toolholder systems. This standardisation reduces setup time and helps maintain repeatable clamping and concentricity when paired with the correct shim and screw set. Controlled chip formation and consistent surface finish The double-sided chipbreaker is tailored to chip control during turning operations and helps to avoid long, stringy chips in stable setups. Combined with the PVD coating, chip evacuation and thermal resistance improve, which contributes to a more consistent surface finish and fewer interruptions for chip clearing. For best results, choose the chipbreaker and grade that match the workpiece material and the chosen cutting parameters. Practical system setup and clear material guidance A complete cutting system comprises the ISO insert, a compatible external holder or boring bar, a locating shim/clamping kit and replacement screws. Key dimensions such as the 15 mm inscribed size, 6.35 mm thickness and the cylindrical hole variant must match the holder specification. Because the grade targets heat-resistant and hard alloys, machining strategies should favour stable clamping, appropriate feeds and speeds, and continuous monitoring of cutting conditions to fully exploit the insert's durability. Contact Metav Werkzeuge for tailored advice on using the Tungaloy AH8005 insert in specific turning operations or to arrange supply of the matching holders and clamping sets Technical data Article number: 6936095 Manufacturer SKU: TUN6936095 SKU: 6936095-Tungaloy Model series: ISO-Drehwendeschneidplatten Key dimensions Size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Approach angle: 55° Clearance angle: 0° Materials & features Material: Carbide (Hartmetall) Coating: PVD Grade: AH8005 Chipbreaker: double-sided Hole: cylindrical hole Shape: rhombic Application: Turning FAQ What materials is this insert suitable for? The DNMG150608 AH8005 insert is designed for heat-resistant alloys and other hard materials; the PVD-coated carbide grade AH8005 offers wear resistance under elevated cutting temperatures. How does the chipbreaker affect performance? The double-sided chipbreaker on this insert improves chip control during turning, supporting safer evacuation and a more consistent surface finish when machining with stable setups. Which dimensions must match the holder? Holder compatibility requires matching the plate form, inscribed size (15 mm), thickness (6.35 mm), hole style (cylindrical) and tolerance class to ensure correct clamping and geometry transfer. Can this insert be used for internal turning? Yes, the rhombic geometry and corner radius permit both external and internal turning applications provided a suitable boring bar or internal holder is used. Is the DNMG150608 AH8005 reversible or single-use? This is a double-sided ISO insert; once one edge is worn, the plate can be indexed to use the opposite cutting edge, increasing usable life per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide wear resistance, precise 0.8 mm nose geometry and ISO compatibility for uninterrupted turning operations; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. DNMG150608 AH8005 — Indexable turning insert (PVD-coated carbide, 0.8 mm radius) by Tungaloy The DNMG150608 AH8005 is an ISO-standard indexable insert for turning, optimised for stable machining of heat-resistant alloys and other hard materials in demanding production environments. PVD-coated carbide for heat-resistant alloys Double-sided insert with 0.8 mm nose radius ISO-standard DNMG 150608 rhombic form Cylindrical hole for secure clamping High-performance wear resistance for demanding materials The DNMG150608 AH8005 grade combines a PVD-coated carbide substrate with a coating chemistry tuned for heat-resistant alloys and hard materials, which results in improved wear resistance and extended edge life under elevated temperatures. In practice, this means longer uninterrupted cutting periods and fewer insert changes during medium- to heavy-duty turning, supporting a higher overall throughput while maintaining consistent surface finish and dimensional control. Geometry and clamping engineered for precision and stability Rhombic geometry in ISO-standard DNMG form provides the favourable 55° approach and a compact profile that suits general turning tasks; together with the 0.8 mm nose radius and 0° clearance, the configuration promotes predictable cutting forces and reliable tool engagement. The insert is double-sided with an integrated double-sided chipbreaker and features a cylindrical hole for secure clamping; the dimensions 15 mm (size) and 6.35 mm (thickness) contribute to a robust assembly when matched with an appropriate holder. System compatibility and selection guidance for process reliability Compatibility is determined by form, clearance, tolerance class, fastening method, size and thickness, so the full machining system must be considered when choosing an insert. Selecting the correct chipbreaker and AH8005 grade based on workpiece material and machine stability reduces the risk of edge failure and optimises chip control. Where higher cutting temperatures or intermittent cuts are present, the PVD-coated carbide grade supports consistent performance and repeatable results across batches. Productivity benefits and workshop practicality The double-sided design offers economic advantages by effectively doubling usable edges, while the coating and substrate combination supports productive machining with stable cutting behaviour and reproducible surface quality. Integration into standard ISO holders and the clear geometry specifications simplify tool planning and minimise setup time, contributing to a measurable reduction in non-productive time and improved process predictability for serial and bespoke turning operations. Contact Metav Werkzeuge for application-specific recommendations on the Tungaloy DNMG150608 AH8005 insert or to request availability details; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6741667 Manufacturer SKU: TUN6741667 SKU: 6741667-Tungaloy Model series: ISO indexable turning inserts Application: Turning Facts Insert size: 15 mm Thickness: 6.35 mm Nose radius: 0.8 mm Approach angle: 55° Clearance angle: 0° Manufacturer article number: 6741667 Special features Grade: AH8005 (PVD-coated cemented carbide) Chipbreaker: double-sided Shape: rhombic (DNMG) Hole: cylindrical, with hole for secure clamping Compatibility: fits holders matching form, clearance, tolerance class, fastening, size and thickness Use: designed for heat-resistant alloys and hard materials under stable machining FAQ What materials is this insert suited for? The DNMG150608 AH8005 insert from Tungaloy is formulated for heat-resistant alloys and other hard materials, offering improved wear resistance during stable turning operations. What are the key geometric dimensions of the insert? The insert has a 15 mm size, 6.35 mm thickness and a 0.8 mm nose radius; the approach angle is 55° with a clearance angle of 0°. Is the insert single- or double-sided? This is a double-sided indexable insert with a double-sided chipbreaker, which effectively provides two usable cutting edges per indexation. How is the insert clamped in the holder? The insert features a cylindrical hole for secure clamping; correct compatibility requires a holder that matches the DNMG form, fastening style and tolerance class. Which grade and coating does the insert use? The product uses the AH8005 grade, a PVD-coated cemented carbide designed for wear resistance in demanding turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 AH8005 Wendeplatten - Tungaloy
A combination of PVD‑coated carbide wear resistance, double‑sided chip control and ISO compatibility delivers stable, productive turning for demanding materials; order the DNMG150608 AH8005 insert directly via Metav Werkzeuge or consult the team for application advice. DNMG 150608 AH8005 — Tungaloy turning insert (ISO 150608), PVD‑coated carbide The DNMG 150608 AH8005 is an ISO‑standard, rhombic turning insert designed for stable external and internal turning of heat‑resistant alloys and other hard materials. ISO geometry DNMG 150608 PVD‑coated carbide grade AH8005 Double‑sided chipbreaker for stable chips Cylindrical hole, 55° rhombic shape Predictable performance for demanding turning operations The PVD‑coated carbide composition of this turning insert provides a hard, wear‑resistant surface that maintains cutting edge integrity under elevated temperatures. The AH8005 grade is formulated for machining heat‑resistant alloys and tougher workpiece materials; this results in longer tool life and fewer interruptions on the shopfloor. In practice, the combination of coating and substrate reduces flank wear and moderates crater formation, which contributes to consistent part tolerance and reduced rework. Secure mounting and ISO compatibility for easy integration Built to the ISO‑standard DNMG geometry, the insert is compatible with a wide range of external holders and boring bars when the form, clearance angle, tolerance class, fastening method, size and thickness match. The insert features a cylindrical mounting hole and a standard thickness of 6.35 mm, allowing for straightforward assembly with common clamping parts and replacement screws. This clarity in interface reduces changeover time and simplifies stock management for production runs. Controlled chips and surface result with engineered geometry The double‑sided chipbreaker design encourages short, stable chip formation in many turning conditions, which aids swarf evacuation and machine safety. The rhombic plate shape with a 55° cutting angle and a corner radius of 0.8 mm enables fine balance between edge strength and surface finish capability. Where a consistent finish and dimensional predictability are required, the geometry supports steady cutting forces and lowers the probability of vibration-induced marks. Application focus and process reliability Intended primarily for turning operations, the insert is suitable where stability and repeatability are priorities — for example in serial production of components from heat‑resistant alloys or hardened steels. The ISO series approach means that holders and supplementary parts form a coherent system: insert, external holder or boring bar, seat/kits and replacement screws. The result is a productive machining process with optimised chip control and predictable tool life, supporting leaner tool inventories and improved output. For tailored application guidance and fast supply of Tungaloy turning inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on holder compatibility and recommended cutting data. Technical Data Article number: 6776090 Manufacturer SKU: TUN6776090 Label / Name: DNMG150608 AH8005 Tungaloy insert Model series: ISO‑Drehwendeschneidplatten Manufacturer item number: 6776090 Facts Corner radius: 0.8 mm Thickness: 6.35 mm Plate size: 15 mm Clearance angle: 0° ISO code: 150608 Cutting angle: 55° Special features Material: PVD‑coated carbide (AH8005) Plate form: rhombic, with cylindrical hole Chipbreaker: double‑sided Typical application: external and internal turning Suited for: heat‑resistant alloys and hard materials System components: ISO insert, holder/boring bar, seat/klemmsatz and replacement screws FAQ Is this insert suitable for both external and internal turning? The DNMG150608 AH8005 Tungaloy turning insert is designed for both external and internal turning when used with a compatible holder and correct mounting geometry. What materials is the AH8005 grade optimised for? AH8005 is a PVD‑coated carbide grade formulated for wear resistance when machining heat‑resistant alloys and other hard materials in stable operating conditions. How is chip control achieved with this insert? Chip control is provided by the double‑sided chipbreaker geometry, which promotes short, controllable chips and improved swarf evacuation during turning. Which dimensions should be checked to ensure holder compatibility? Match the ISO geometry (DNMG 150608), plate thickness (6.35 mm), plate size (15 mm), corner radius (0.8 mm) and mounting hole type (cylindrical) to the holder specifications for proper compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com