DNMG 150608 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T6215 wear resistance and the cost-efficiency of a double-sided, ISO DNMG insert to maintain uninterrupted turning operations; order directly via Metav Werkzeuge or consult the team for application guidance. DNMG 150608 T6215 – DNMG turning insert for turning applications, Tungaloy DNMG150608 T6215 Tungaloy insert is an ISO-format, rhombic indexable insert engineered for productive turning of rostfreier Stahl under stable to lightly interrupted cutting conditions. CVD-coated carbide T6215 Optimised for rostfreier Stahl turning Double-sided with cylindrical hole Rhombic 55° geometry, 0° clearance Durable, wear-resistant grade for consistent cutting performance The T6215 grade is a CVD-coated carbide developed to extend tool life when machining rostfreier Stahl. The chemical vapour deposition layer improves surface hardness and reduces adhesive wear, so flank wear develops more slowly under typical turning parameters. For production runs this translates into fewer index changes and more predictable tool-change intervals, which supports stable cycle times and lowers per-part tooling cost. The coating behaviour and substrate combination are optimised for applications where moderate thermal loads and built-up edge tendencies are common. Indexable design that lowers operating cost and simplifies handling A double-sided DNMG insert provides two usable cutting edges per face and can be indexed to present fresh edges quickly, reducing inventory turnover and downtime. The rhombic 55° geometry with a 0° clearance angle offers a good balance between edge strength and versatility for external and internal turning. The 0.8 mm corner radius promotes robust edge life on interrupted cuts while preserving dimensional control. Because the insert is ISO-conforming, holder compatibility is determined by form, clearance, tolerance class, clamping and thickness, enabling straightforward integration into existing tool systems. Practical system considerations for safe clamping and repeatable results A complete cutting system comprises the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws; correct combination ensures repeatable chip control and secure clamping. The cylindrical hole and central fixing style are designed for positive location and stable fixation in most DNMG-capable holders. Select the appropriate chipbreaker and grade to match workpiece stability and cutting strategy: the presented insert is double-sided and suited to standard toolpaths, while the CVD coating benefits finish and wear resistance during continuous or light interrupted turning. For application support, toolholder compatibility checks or to order original Tungaloy DNMG inserts, contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 – the Metav team provides fast, practice-oriented advice and prompt delivery. Technical data Article number: 6944664 Manufacturer SKU: TUN6944664 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150608 T6215 Tungaloy-Wendeplatte Facts Size: 15 mm Thickness: 6.35 mm Clearance angle: 0° Corner radius: 0.8 mm Insert angle: 55° Central fixing: with hole Hole style: cylindrical hole Special features Coating/grade: T6215 (CVD-coated carbide) Material: Hartmetall (carbide) Application: Turning Insert shape: Rhombic Chipbreaker: Double-sided ISO designation: DNMG150608 FAQ What materials is this insert designed for? The DNMG150608 T6215 insert is formulated for machining rostfreier Stahl; the CVD-coated carbide substrate supports wear resistance and surface quality in those applications. How does the T6215 coating benefit production runs? The T6215 CVD coating on the carbide substrate reduces adhesive and abrasive wear, resulting in longer edge life and more stable tool-change intervals for series turning with the DNMG insert. Is the insert compatible with standard DNMG holders? Compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; the DNMG150608 follows ISO dimensions and fits holders designed for DNMG150608 geometry. What is the purpose of the double-sided design? The double-sided configuration provides additional cutting edges per insert, lowering cost per edge and enabling rapid indexing to restore a sharp cutting edge with minimal downtime. Which corner radius should be chosen for interrupted cuts? The DNMG150608 is supplied with a 0.8 mm corner radius, offering enhanced edge strength under lightly interrupted conditions while maintaining good dimensional control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T6215, the 55° DNMG geometry and the 0.8 mm nose radius for a balance of surface quality and tool life; order the insert directly via Metav Werkzeuge or contact our consultants for machining recommendations. DNMG150608 T6215 indexable insert — CVD-coated carbide for turning (Tungaloy) A DNMG150608 T6215 insert engineered for ISO‑standard turning applications, optimised for rostfreier Stahl in stable to slightly interrupted cutting conditions. ISO rhombic insert DNMG 55° geometry CVD-coated carbide grade T6215 0.8 mm nose radius for fine finishing Double-sided chipbreaker, cylindrical hole Improved surface quality with longer tool life The combination of a CVD-coated layer and a robust carbide substrate yields a measurable improvement in wear resistance and consistent cutting performance. The applied grade T6215 is formulated for turning rostfreier Stahl under stable to lightly interrupted conditions, which translates into fewer insert changes and more predictable batch throughput. By choosing this insert, shops gain a balance between abrasive wear protection and thermal stability, helping to extend service intervals and reduce total tooling cost per part. More reliable chip control and process stability The rhombic DNMG geometry with a 55° approach angle and a double-sided chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built-up edge and improving tool stability during longer cuts. Such geometry supports smoother force distribution and less vibration, which benefits both finish quality and dimensional repeatability. For operations that encounter short interruptions, the insert’s shape and chipformer help maintain cutting continuity and diminish the likelihood of surface defects. Simple fitment and predictable set-up times Built to ISO dimensions, the insert is compatible with standard DNMG 55° holders when form, relief angle, tolerance class, clamping and size match. Key dimensions such as the 0.8 mm nose radius, 6.35 mm thickness and 15 mm inscribed circle enable precise setup and repeatable pocket seating. The insert’s cylindrical hole and standard mounting ensure quick indexing and secure clamping, minimising downtime during tool changes and simplifying tool management in production environments. Economic machining and application guidance For shops prioritising efficient rostfreier Stahl turning, the T6215 grade provides a pragmatic mix of wear resistance and edge integrity that supports productive machining. Selecting the correct chipbreaker and holder stiffness is essential: for heavy roughing choose a more robust setup, while finishing benefits from the fine nose radius and CVD coating. The insert’s design aims to reduce scrap, lower tooling consumption and increase confidence in process outcomes — a rational choice for manufacturers seeking reproducible results and improved cost-efficiency. For detailed application advice or part‑specific recommendations for the Tungaloy DNMG150608 T6215 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6944722 SKU: 6944722-Tungaloy Manufacturer SKU: TUN6944722 Model series: ISO turning indexable inserts Key measurements Insert designation: DNMG150608 ISO code: 150608 Geometry angle: 55° Nose radius: 0.8 mm Thickness: 6.35 mm Inscribed circle: 15 mm Relief angle: 0° Materials & special features Substrate: carbide Coating: CVD Grade: T6215 Chipbreaker: double-sided Shape: rhombic Hole: with cylindrical hole Application: Turning; suited to rostfreier Stahl in stable to slightly interrupted cuts FAQ Which materials is this insert best suited for? The DNMG150608 T6215 insert is primarily designed for turning rostfreier Stahl under stable to slightly interrupted cutting conditions; selecting the correct chipbreaker and cutting data is important for optimal performance. How is compatibility with holders determined? Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; the DNMG150608 follows ISO DNMG dimensions and fits standard 55° DNMG holders when the pocket accepts the 15 mm inscribed circle and 6.35 mm thickness. What are the most relevant dimensions to check before ordering? Check the insert designation DNMG150608, the 0.8 mm nose radius, 6.35 mm thickness, 15 mm inscribed circle, and the 55° geometry to ensure a proper fit in the selected holder. Is the insert reversible for multiple cutting edges? Yes, the insert is double-sided, allowing indexing to a fresh cutting edge and extending the number of usable edges per insert. What benefits does the T6215 grade offer? The T6215 CVD-coated carbide grade provides enhanced wear resistance and thermal stability for rostfreier Stahl machining, supporting consistent surface quality and longer tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9205 Wendeplatten - Tungaloy
Combining CVD-coated T9205 wear resistance with a double-sided chipbreaker and ISO rhombic geometry yields a robust option for productive turning of Stahl under stable machining conditions; order the DNMG150608 T9205 Tungaloy insert directly via Metav Werkzeuge or consult the technical team if advice is required. DNMG150608 T9205 Tungaloy turning insert — ISO rhombic, CVD-coated carbide for turning The DNMG150608 T9205 Tungaloy insert is an ISO-standard rhombic, double-sided turning insert designed for productive external and internal turning of Stahl, offering a 55° geometry and a secure cylindrical-hole fastening for reliable clamping CVD-coated T9205 for wear resistance ISO rhombic DNMG form, 55° cutting angle Double-sided chipbreaker, economical indexing Cylindrical hole for secure fastening Increased productivity through wear-resistant coating The CVD-coated T9205 grade is engineered for long wear life during demanding turning operations, translating into fewer indexings and longer tool change intervals. The cemented carbide substrate combines toughness with the coating’s hardness to withstand higher cutting speeds, enabling a measurable productivity increase in stable setups. This technical robustness benefits machining processes where constant chip control and repeatable tool life are required, reducing unscheduled downtime and supporting steady cycle times. Geometry engineered for precise, reliable cutting A 55° rhombic form with a 0° relief angle and a 0.8 mm nose radius delivers consistent engagement and defined cutting conditions. The ISO-compliant form ensures compatibility with standard external holders and boring bars when matched by form, tolerance class, fastening style, size and thickness. The 6.35 mm plate thickness and 15 mm size provide a stable seat in the clamping system, while the cylindrical hole guarantees secure fixation under moderate to high radial loads, supporting dimensional stability and repeatable surface finish. Cost-effective indexing and controlled chip formation The double-sided chipbreaker permits economical use of multiple cutting edges before replacement, lowering tooling cost per component and improving process economy. The chipbreaker geometry, combined with the T9205 coating, promotes stable chip formation when machining Stahl, reducing the risk of built-up edge and enabling consistent surface quality. For production runs where reproducibility and tool life directly affect unit costs, this insert offers a balance of performance and economy. System-oriented compatibility and recommended setup This insert functions as part of an ISO-based system: an ISO turning insert paired with a compatible outer holder or boring bar, plus the appropriate underlay/clamping set and replacement screws. Compatibility depends on matching the insert form and dimensions to the holder’s seat and fastening method; selecting the correct tolerance class and relief angle ensures correct clamping and optimal cutting geometry. Specifying the system components together helps secure process reliability and simplifies procurement and maintenance. Contact Metav Werkzeuge for application-specific recommendations or to order the DNMG150608 T9205 Tungaloy insert — technical consultants are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6785704 SKU: 6785704-Tungaloy Manufacturer SKU: TUN6785704 Model series: ISO turning inserts Manufacturer: Tungaloy Facts Cutting angle: 55° Inscribed circle / size: 15 mm Thickness: 6.35 mm Nose radius: 0.8 mm Relief angle: 0° ISO code: 150608 Special features Grade / sort: T9205 Material: CVD-coated cemented carbide Chipbreaker: double-sided Hole: with cylindrical hole Plate form: rhombic Application: turning System components: matching outer holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The T9205 grade and CVD-coated cemented carbide substrate are optimised for productive turning of Stahl; the combination supports stable chip control and wear resistance under higher cutting speeds. What are the key dimensions and mounting details? The insert has a 15 mm inscribed circle, 6.35 mm thickness, 0.8 mm nose radius and a cylindrical hole for secure fastening; the ISO 150608 geometry corresponds to the DNMG150608 form. Can the insert be used for internal as well as external turning? Yes — the rhombic ISO form and secure clamping allow use in both external and internal turning applications when paired with a suitable holder or boring bar. How does the double-sided chipbreaker affect tooling costs? The double-sided chipbreaker enables economical indexing and extended usable edges, reducing tooling cost per part and improving overall process economy for production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9205 Wendeplatten - Tungaloy
Benefit from a robust combination of wear‑resistant CVD‑coated carbide, reliable chip control and ISO compatibility for productive steel turning — order the insert via Metav Werkzeuge or request technical advice from our consultants. DNMG150608 T9205 indexable turning insert — ISO DNMG150608, CVD‑coated carbide — Tungaloy The DNMG150608 T9205 is an ISO‑standard indexable turning insert designed for productive external and internal turning of steel under stable machining conditions. CVD‑coated carbide grade T9205 0.8 mm corner radius for robust cuts Double‑sided chipbreaker for stable chips ISO DNMG150608 rhombic insert, 55° geometry Greater productivity through wear‑resistant coating and stable cutting The combination of a CVD‑coating and a hard carbide substrate delivers a pronounced wear resistance that supports higher cutting speeds in stable set‑ups. The T9205 grade is formulated specifically for productive machining of steel, offering a balance between tool life and consistent surface finish. For production environments where cycle time and repeatability matter, this insert improves process stability and reduces the frequency of index changes. The description of the coating and substrate helps planners estimate reconditioning intervals and select feeds and speeds that favour both throughput and predictable tool behaviour. Precision geometry for controlled cutting and chip formation A rhombic DNMG geometry with a 55° approach angle and a 0.8 mm corner radius provides a robust cutting edge that resists chipping at interrupted cuts while preserving dimensional control. The double‑sided chipbreaker is tuned for consistent chip segmentation, which lowers the risk of entanglement and supports automated chip evacuation. The 6.35 mm plate thickness and the cylindrical hole ensure secure clamping and repeatable seating in ISO holders; the 0° clearance angle is typical for this geometry and contributes to a stable contact area between insert and workpiece. These features simplify process set‑up and support the achievement of target tolerances and surface quality. Practical compatibility, selection criteria and system setup The insert is part of an ISO system: compatibility with a turning holder depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness. A complete system comprises the indexable insert, a matching external holder or boring bar, a shim/clamp set and appropriate replacement screws. Select the T9205 grade and the double‑sided chipbreaker when machining steel in stable clamping conditions and when increased cutting speeds are desired. For mixed or less rigid set‑ups, choose a chipbreaker and grade tailored to the specific stability and material mix; consultation on matching holder geometry and cutting data can reduce trial‑and‑error and improve first‑pass yields. For productive steel turning with Tungaloy's T9205 grade, contact Metav Werkzeuge for tailored application advice and fast supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6785738 SKU: 6785738-Tungaloy Manufacturer SKU: TUN6785738 Designation: DNMG150608 Model series: ISO indexable turning inserts Material: carbide Grade: T9205 Numbers / Core Technical Data Inscribed circle: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Approach angle: 55° Clearance angle: 0° Special features CVD coating on carbide substrate Double‑sided chipbreaker Cylindrical hole for secure clamping Rhombic plate form (DNMG) ISO DNMG150608 designation Application: turning (external and internal) System components: holder, shim/clamp set, spare screws FAQ What materials is this insert suitable for? The DNMG150608 T9205 insert is designed primarily for productive turning of steel; the CVD‑coated T9205 grade excels under stable machining conditions. Which holders are compatible with DNMG150608? ISO‑standard external turning holders that accept DNMG inserts will be compatible provided form, free angle, tolerance class, fastening and thickness match the DNMG150608 specification. How does the chipbreaker affect machining? The double‑sided chipbreaker on the DNMG150608 T9205 insert helps generate short, controllable chips and supports consistent evacuation, improving process reliability during steel turning. Is the insert suitable for interrupted cuts or unstable set‑ups? The 0.8 mm corner radius and robust carbide substrate give the DNMG150608 insert good edge strength, but the T9205 grade performs best in relatively stable set‑ups; consider alternative grades or geometry for highly unstable conditions. What does ‘double‑sided’ mean for service life? Double‑sided construction allows reversing the insert to use the second cutting face when one is worn, extending the usable life of the indexable plate; observe manufacturer instructions for correct indexing and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150608 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9205 for extended wear resistance, a 0.8 mm corner radius for versatile profile control, and secure mounting via the cylindrical hole for consistent productivity — order directly via Metav Werkzeuge or contact our advisors for tailored advice. DNMG 150608 T9205 DNMG turning insert for Turning — Tungaloy A DNMG150608 T9205 is a rhombic ISO turning insert designed for productive external and internal turning under stable machining conditions. CVD-coated carbide T9205 Double-sided chipbreaker 0.8 mm corner radius Cylindrical hole, 6.35 mm thick High-performance cutting for productive turning This insert combines a CVD-coated carbide substrate with a cutting geometry tuned for efficient material removal in steel, enabling higher cutting speeds and reliable tool life under stable conditions. The chosen grade T9205 delivers wear resistance and consistent edge strength, which translates into fewer indexings and less unplanned downtime. The result is improved process throughput and predictable component quality. Secure seating and geometry for consistent results Built to ISO norms, the rhombic geometry with a 55° approach angle and 0° clearance angle ensures predictable cutting forces and surface finish. The cylindrical hole and standard thickness of 6.35 mm provide a stable clamping interface, so the insert seats reliably in compatible toolholders; compatibility depends on form, tolerance class, fixing method, size and thickness. This stable connection reduces vibration and supports repeatable machining. Practical workshop advantages and edge use The double-sided chipbreaker supplies two effective cutting edges per index, lowering cost per edge and simplifying stock management. A 0.8 mm corner radius offers a balance between strength and small-radius profiling, suitable for many general turning tasks. The robust plate design and carbide construction give confidence in hold-up against moderate interruptions, while the ISO format allows quick replacement during shifts to maintain production flow. For enquiries about suitability for specific applications or to place an order for the Tungaloy DNMG150608 T9205 insert, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical guidance and supply options. Technical data Article number: 6785706 SKU: 6785706-Tungaloy Manufacturer SKU: TUN6785706 Model series: ISO turning inserts Article name: DNMG150608 T9205 Tungaloy turning insert Core data Corner radius: 0.8 mm Approach angle: 55° Clearance angle: 0° Thickness: 6.35 mm Size: 15 mm Hole: cylindrical Special features Material: carbide Coating: CVD, grade T9205 Chipbreaker: double-sided Application: external and internal turning Compatible with ISO holders (form/tolerance/size dependent) FAQ What materials is this insert suitable for? The DNMG150608 T9205 insert from Tungaloy is optimised for productive turning of steel and is specified for operations where higher cutting speeds and stable conditions are present. How many usable edges does the insert provide? Thanks to the double-sided chipbreaker, the insert offers two indexable cutting edges, reducing handling time and improving cost-efficiency per edge. What determines compatibility with a toolholder? Compatibility is governed by the insert form, clearance angle, tolerance class, fixing method, size and thickness; the DNMG150608 format and 6.35 mm thickness follow ISO conventions for straightforward selection. What is the corner radius and how does it affect machining? The 0.8 mm corner radius provides a compromise between edge strength and detail in the turned profile, making it versatile for general finishing and light roughing operations. How is the insert secured in the holder? Retention is via the central cylindrical hole and appropriate clamping set; correct torque and mounting components ensure stable seating and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Combining the CVD‑coated carbide grade T9215 with the ISO DNMG150608 geometry results in stable cutting performance and long wear life for medium‑steel turning; the rhombic, double‑sided design and 0° relief angle support productive continuous and slightly interrupted cuts. Order original Tungaloy inserts directly via Metav Werkzeuge or ask the consultants for holder compatibility and application advice. DNMG150608 T9215 Tungaloy ISO turning insert — CVD‑coated carbide, 55° geometry The DNMG150608 T9215 is a rhombic ISO turning insert for medium‑steel machining, designed for both external and internal turning with a 55° lead angle and a 0° relief angle for stable engagement. CVD‑coated carbide grade T9215 Optimised for medium steel turning Double‑sided chipbreaker, rhombic form ISO DNMG150608 with cylindrical hole High productivity for medium‑steel turning The combination of CVD‑coated surface treatment and a tough carbide substrate makes this insert especially suited to the demands of medium‑steel machining. The T9215 grade balances wear resistance with fracture toughness, which means longer cutting life under continuous and mildly interrupted conditions and fewer tool changes, supporting a measurable increase in throughput. For production environments where repeatable surface finish and stable tool life matter, the geometry and grade of this insert contribute directly to predictable cycle times and lower process variance. Geometry and mounting that ensure repeatable results The rhombic DNMG150608 form, with a corner radius of 0.8 mm and insert thickness of 6.35 mm, provides a robust cutting edge and clear definition of cutting forces. The insert is supplied with a cylindrical hole for secure fastening; compatibility with a specific holder depends on the insert form, relief angle, tolerance class, fastening method, size and thickness. Clear reference to these parameters reduces the risk of mismatch and ensures the insert performs as intended when mounted in matched ISO‑type holders or boring bars. Cut quality, chip control and surface finish The double‑sided chipbreaker is designed to control chip formation and evacuation when machining steel, reducing the likelihood of built‑up edge and protecting the workpiece surface. Controlled chip flow improves repeatable surface quality and lessens secondary operations. The 55° lead angle helps distribute cutting forces, producing a balanced load on the tool and contributing to consistent surface finish with lower risk of chatter in stable set‑ups. Practical advantages in shop‑floor use As a reversible, double‑sided insert, the design offers efficient stock usage and straightforward indexability, reducing tooling costs per cutting edge. The CVD coating enhances thermal stability at higher cutting speeds, while the insert’s geometry supports transfers between external and internal turning tasks without radical changes to set‑up. For operations seeking a reliable, versatile insert for series production on medium steels, this option offers a practical combination of durability and predictable performance. For original Tungaloy DNMG150608 T9215 inserts and detailed guidance on holder selection, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to request application‑specific advice. Technical data Article number: 6772264 Manufacturer article number: 6772264 SKU (manufacturer): TUN6772264 SKU: 6772264-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Carbide Coating/sort: T9215 (CVD‑coated) Numbers Corner radius: 0.8 mm Insert thickness: 6.35 mm Size: 15 mm Lead angle: 55° Relief angle: 0° Design and special features Rhombic insert shape Cylindrical hole for fastening Double‑sided chipbreaker ISO DNMG150608 standard CVD‑coated carbide grade T9215 Suitable for turning (external and internal) Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert intended for? The Tungaloy DNMG150608 T9215 insert is designed primarily for medium steels, combining wear resistance and toughness for productive turning. What does the T9215 grade indicate? T9215 denotes a CVD‑coated carbide grade optimised for medium‑steel machining, offering a balance between wear life and fracture resistance. How is the insert mounted in a holder? The insert uses a cylindrical hole for securing with the appropriate clamp and screw; compatibility depends on holder form, tolerance class and the insert’s size and thickness. Is the insert reversible or single‑edged? The DNMG150608 is double‑sided and indexable, allowing multiple edges to be used before replacement. Can this insert be used for interrupted cuts? Yes; the T9215 grade and insert geometry are suitable for continuous and slightly interrupted cuts typical in production turning. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability and a double-sided chipbreaker for consistent productivity in medium-steel turning; order directly via Metav Werkzeuge or ask the consultants for application advice. DNMG150608 T9215 indexable turning insert — rhombic 55° geometry, CVD-coated carbide by Tungaloy DNMG150608 T9215 is an ISO-designation indexable insert for precision turning in medium steels, providing a balanced mix of wear resistance and fracture safety in continuous or lightly interrupted cuts. CVD-coated carbide for long tool life Double-sided chipbreaker for consistent chip control Rhombic 55° geometry for versatile turning ISO compatibility with standard holders Reliable chip control for predictable cycles The rhombic 55° geometry, combined with a double-sided chipbreaker, ensures stable chip formation under varied cutting conditions. This reduces interruptions and supports longer unattended running times, which directly improves process efficiency. The insert’s 0.8 mm corner radius and 6.35 mm thickness provide a reliable edge for external and internal turning tasks, while the CVD-coated carbide composition delivers the required wear resistance for medium-steel applications without sacrificing edge toughness. Engineered for productive medium-steel machining Manufactured in the T9215 grade, the insert matches the demands of medium-strength steels where a balance between abrasion resistance and fracture toughness is essential. The CVD coating contributes to thermal stability at raised cutting speeds, enabling higher material removal rates and consistent surface quality. Expect steady tool life and reproducible component tolerances when the insert is paired with appropriately rated ISO holders and correct feed/speed settings. Compatibility and workshop practicality The insert is ISO-standardised, so compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. The DNMG150608 design includes a cylindrical central hole for secure clamping and a double-sided layout that doubles the indexable edges per insert, reducing tooling costs and changeover time. Spare screws and a suitable clamp plate complete the typical system set-up, allowing quick replacement and minimised machine downtime. Clear benefits for production planning and quality Using an insert from a recognised series reduces process variability: the combination of stable chip control, CVD-coated carbide, and the T9215 grade supports both productivity and predictable tool life. This leads to better capacity planning and fewer production interruptions. For workshops seeking a pragmatic, high-throughput solution for turning, the insert offers a dependable compromise between wear resistance and edge reliability. For application-specific advice or to secure stock of Tungaloy DNMG150608 T9215 inserts, contact Metav Werkzeuge for availability and tailored recommendations: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6774086 Manufacturer SKU: TUN6774086 Label: DNMG150608 T9215 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Thickness: 6.35 mm Insert size: 15 mm Relief angle: 0° Diamond angle: 55° ISO designation: 150608 Hole: with cylindrical hole Special features Material: CVD-coated carbide Grade: T9215 Application: turning (medium steels) Shape: rhombic, double-sided Chipbreaker: double-sided Compatibility: ISO holders (form, relief, tolerance, fastening, size, thickness) FAQ What materials is this insert intended for? The DNMG150608 T9215 insert is formulated for medium-steel machining and performs best on workpieces classified as medium-strength steels. How does the T9215 grade influence cutting performance? T9215 provides a balance of high wear resistance and fracture toughness, so the DNMG150608 T9215 insert sustains productivity in continuous to lightly interrupted cuts. Is the insert compatible with standard ISO turning holders? Yes; the DNMG150608 geometry and dimensions follow ISO standards, but compatibility depends on holder form, relief angle, tolerance class, fastening and thickness. How many usable edges are on each insert? The rhombic, double-sided design of the DNMG150608 T9215 insert supplies multiple indexable edges, effectively extending the service life per insert and reducing tool change frequency. What hole style does the insert use for clamping? The insert features a cylindrical central hole for secure clamping in standard clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Taking advantage of the CVD-coated carbide T9215, robust 0.8 mm corner radius and ISO conformity ensures high productivity and stable chip control in medium-steel turning; pair the insert with the appropriate ISO holder, underlay and replacement screws for repeatable machining. Order directly via Metav Werkzeuge or consult the team for application-specific setup. DNMG150608 T9215 Tungaloy turning insert — CVD-coated carbide, 0.8 mm radius DNMG150608 T9215 is an ISO-standard rhombic turning insert designed for medium-steel machining, offering a CVD-coated carbide substrate and a double-sided chipbreaker for continuous to lightly interrupted cuts DNMG150608 ISO rhombic insert, 6.35 mm thick CVD-coated carbide grade T9215 for medium steel Double-sided chipbreaker with cylindrical hole 0.8 mm corner radius for reliable edge strength Improved productivity through durable CVD-coated carbide The CVD-coated carbide in grade T9215 combines wear resistance with fracture resistance, making it a cost-effective choice for repetitive turning tasks on medium steels. The coating provides a hard, wear-resistant surface while the carbide core maintains toughness; this balance supports higher cutting speeds and longer edge life in continuous and slightly interrupted cuts. For production environments seeking reduced tool changes and consistent cycle times, this insert delivers measurable time savings while preserving surface quality. Stable geometry and secure clamping for repeatable accuracy The rhombic ISO DNMG geometry with a cylindrical hole enables reliable positioning and clamping in compatible holders. The 6.35 mm thickness and specified 0.8 mm corner radius contribute to edge stability and resistance to chipping, which is particularly important at higher feeds or when encountering surface irregularities. Compatibility with a holder depends on form, clearance angle (0°), tolerance class, fastening method, size and thickness; selecting a matching external holder or boring bar and the correct shim/clamp set ensures repeatable runout and consistent part tolerances. Easy integration into system setups and economical use The insert is double-sided and indexable, offering multiple usable cutting edges to lower tooling cost per part and simplify inventory management. A complete system typically comprises the ISO insert, a matching external holder or boring bar, an underlay/clamping set and replacement screws—this modular approach facilitates fast changeovers and minimal downtime. Choosing the correct chipbreaker and grade for the workpiece and stability conditions enhances chip control and surface finish, helping to avoid secondary operations and boosting overall process efficiency. For application advice on Tungaloy CVD-coated inserts or to confirm compatibility with existing holders, contact Metav Werkzeuge for tailored recommendations and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6796078-Tungaloy Manufacturer article number: 6796078 Manufacturer SKU: TUN6796078 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Dimensions & geometry Insert designation: DNMG150608 Size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Relief/clearance angle: 0° Included hole: cylindrical hole Chipbreaker: double-sided Cutting angle: 55° Features & suitability Coating: CVD-coated (T9215) Recommended use: Turning Target material: Medium steel Suitable for: Continuous to slightly interrupted cuts System components: matching holder or boring bar, underlay/clamping set, replacement screws Plate form: Rhombic FAQ What materials is the insert suited for? The insert with grade T9215 is designed as a first choice for medium steel machining and provides a balance of wear and fracture resistance suitable for production turning. How many edges are usable on this insert? The rhombic insert is double-sided and indexable, offering multiple usable cutting edges to extend service life and reduce tooling costs. What does the 0.8 mm corner radius mean for machining? A 0.8 mm corner radius increases edge strength and helps prevent chipping under higher feed conditions, contributing to a stable cutting edge and improved part quality. How is holder compatibility determined? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; confirm the holder matches the ISO DNMG geometry and 6.35 mm plate thickness. Is the coating suitable for interrupted cuts? The CVD-coated T9215 grade handles continuous and slightly interrupted cuts well; for heavily interrupted machining, further assessment of stability and grade selection is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 grade and the double-sided chipbreaker to achieve consistent productivity in medium-steel turning; order this insert directly via Metav Werkzeuge or consult our specialists for application support. DNMG150608 T9215 turning insert by Tungaloy — ISO rhombic insert for turning The DNMG150608 T9215 is an ISO-standard rhombic turning insert engineered for external and internal turning operations, combining robust wear resistance with reliable fracture toughness for continuous to lightly interrupted cuts. ISO-standard rhombic insert DNMG format CVD-coated carbide T9215 for steels Double-sided chipbreaker for efficient chips Cylindrical-hole design for secure fixing Productivity for medium-steel machining The CVD-coated carbide grade offers a balance of high wear resistance and toughness, making it especially suitable for medium-steel applications. The coating reduces flank and crater wear during prolonged cuts, which translates into longer tool life and fewer index changes. With the T9215 grade and the rhombic geometry, the insert maintains cutting-edge stability even under elevated material removal rates, supporting higher throughput without sacrificing surface integrity. Secure clamping and geometry that reduces downtime Designed to fit ISO holders, the insert’s cylindrical hole and standard form ensure consistent mounting and repeatable positioning in compatible toolholders. The 0° clearance angle and the 55° approach geometry deliver predictable cutting forces and stable chip flow. This mechanical compatibility simplifies setup and reduces the risk of vibration-induced edge damage, so machine cycles remain uninterrupted and maintenance intervals lengthen. Chip control and process stability The double-sided chipbreaker is tuned for continuous to slightly interrupted cuts, producing short, controllable chips that evacuate reliably from the cut. Improved chip formation lowers the chance of built-up edge and workpiece rework, while consistent chip shape aids in automated handling and collection systems. This results in a cleaner machining environment and fewer process interruptions during long production runs. Practical handling and system integration As part of an ISO insert system, the item integrates with standard external holders or boring bars, and requires the appropriate shim/clamp set and replacement screws for assembly. The rhombic form with a 0.8 mm cutting-edge radius delivers a good compromise between edge strength and profile detail, making the insert a versatile choice for a broad range of turning tasks where repeatable quality and efficient chipbreaking are priorities. The DNMG150608 designation ensures compatibility across matched tooling systems. For high-productivity turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for tailored advice and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6773953 SKU: 6773953-Tungaloy Manufacturer SKU: TUN6773953 Designation: DNMG150608 Manufacturer: Tungaloy Facts Cutting edge radius: 0.8 mm Approach angle: 55° Clearance angle: 0° Thickness: 6.35 mm Inscribed circle: 15 mm Special features CVD-coated carbide Double-sided chipbreaker Rhombic plate form Cylindrical hole for secure fixing ISO-standard turning insert Suited for continuous to light interrupted cuts Intended for medium-steel machining System components: insert, holder or boring bar, shim/clamp set, spare screws FAQ What materials is this insert best suited for? The T9215-grade insert is optimised for medium steels; the CVD-coated carbide composition ensures good wear resistance and edge security during standard turning operations. Does this insert work with standard ISO toolholders? Yes, the DNMG150608 is an ISO-standard rhombic insert and is compatible with corresponding external holders and boring bars when the holder matches form, clearance, tolerance and fixing dimensions. How does the chipbreaker affect process stability? The double-sided chipbreaker produces short, controllable chips that improve evacuation and reduce the likelihood of built-up edge, which enhances process reliability for continuous to slightly interrupted cuts. What is the recommended application for the 0.8 mm radius? A 0.8 mm cutting-edge radius offers a balance between edge strength and profile detail, making it suitable for general turning where both surface finish and tool life are important. Is the insert reversible or indexable? The insert is double-sided and indexable; the design allows edge rotation to a fresh cutting edge, extending usable life and maintaining consistent performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance and fracture toughness for increased productivity in medium-steel turning; order the DNMG150608 T9215 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150608 T9215 indexable insert for turning — Tungaloy The DNMG150608 T9215 is an ISO-standard rhombic indexable insert for external and internal turning, engineered as a CVD-coated carbide grade for productive machining of medium steel. CVD-coated carbide grade T9215 Double-sided chipbreaker for versatility Rhombic shape with 55° lead angle Compatible with ISO turning holders Boosted productivity through a balanced grade and coating The combination of a CVD-coated carbide substrate and the T9215 grade delivers a pragmatic balance between wear resistance and fracture toughness, making the insert ideal for sustained production runs. For operations that require continuity and occasional interruptions, this chemistry reduces flank wear and maintains edge integrity, which translates into longer tool life and fewer indexings. The result is measurable productivity gains when machining medium-grade steels, achieved without sacrificing surface finish or process stability. Secure clamping and repeatable set-up for consistent parts Designed as a rhombic insert with a 55° lead angle and 0° clearance angle, the geometry promotes predictable cutting forces and steady engagement in both external and internal turning. The 0.8 mm corner radius and 6.35 mm thickness contribute to robust edge strength and vibration resistance, while the central cylindrical hole enables reliable locating in ISO-standard holders. Compatibility with the chosen holder is determined by form, clearance angle, tolerance class, clamping and plate size and thickness; this ensures a repeatable set-up and consistent part-to-part accuracy across batches. Flexible application range and practical selection advice This insert is tailored for outer and inner turning of medium steels and performs best with a matching chipbreaker and tool stability. The double-sided chipbreaker offers economical stock usage and quick index changes, reducing downtime and inventory complexity. When selecting parameters, choose the chipbreaker and grade according to workpiece material and cutting conditions: stable setups permit higher cutting data and exploit the grade’s strength, while lighter, interrupted cuts still benefit from the insert’s toughness. For guidance on holder pairing or parameter windows, technical advice is available to support process optimisation. For machining with high process security, request availability and holder compatibility advice for the DNMG150608 T9215 from Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772225 SKU: 6772225-Tungaloy Manufacturer SKU: TUN6772225 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Material: Carbide Facts ISO designation: 150608 Corner radius: 0.8 mm Plate thickness: 6.35 mm Plate size: 15 mm Lead angle: 55° Clearance angle: 0° Special features CVD-coated carbide grade T9215 Rhombic plate form Double-sided chipbreaker With cylindrical hole Suitable for outer and inner turning Compatibility dependent on form, clearance angle, tolerance class, clamping, size and thickness Recommended for medium steel; continuous to lightly interrupted cuts FAQ What materials is this insert best suited for? The DNMG150608 T9215 from Tungaloy is optimised for medium steels; the CVD-coated carbide grade balances wear resistance and toughness for productive turning. Is the insert reversible and economical in use? Yes, this indexable insert is double-sided with a chipbreaker on each side, enabling economical tool use and easy indexing to restore cutting edges. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, clamping method and the insert’s size and thickness; the DNMG150608 conforms to ISO standards and fits ISO turning holders designed for this designation. How does the chipbreaker influence performance? The double-sided chipbreaker supports reliable chip control across a range of cutting conditions; combined with the T9215 grade, it helps maintain surface finish and process stability. Can this insert handle interrupted cuts? The T9215 grade provides good fracture resistance, making the insert suitable for continuous to lightly interrupted cuts in medium steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable fracture toughness make this insert a dependable choice for productive turning of medium steels; its ISO conformity and double-sided chipbreaker reduce tooling costs and ease integration into existing holder systems. Order the DNMG150608 T9215 directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150608 T9215 — ISO indexable turning insert, CVD-coated carbide, double-sided chipbreaker (Tungaloy) A DNMG150608 T9215 insert for external and internal turning, ISO-compliant and optimised for medium-steel machining with a rhombic form and cylindrical hole. CVD-coated carbide for medium steel machining Double-sided chipbreaker for stable chips ISO-standard rhombic shape for holder compatibility 6.35 mm thickness and 0.8 mm corner radius Productivity and material match that reduce cycle time The DNMG150608 T9215 grade combines a CVD-coated layer on a robust carbide substrate to deliver elevated wear resistance and improved fracture toughness. Designed as a first-choice solution for medium steel machining, this grade maintains cutting-edge performance in continuous to slightly interrupted cuts, helping to raise overall productivity without sacrificing edge life. The result is longer tool intervals and more consistent component quality on serial turning operations. Secure integration with common holder systems for reliable clamping Built to the ISO series for indexable turning, this rhombic insert features an established geometry that eases mechanical matching with compatible holders. The ISO-standard form, rhombic profile, 6.35 mm thickness and 0.8 mm corner radius allow predictable seat fit and repeatable positioning; the cylindrical hole supports secure fastening and simple orientation during index changes. Compatibility is governed by form, relief angle and tolerance class, so the insert integrates smoothly into existing tool systems while keeping setup time low. Consistent chip control and application guidance for finished surfaces The double-sided chipbreaker is engineered for stable chip formation, which reduces the risk of chip entanglement and supports steady machining forces. This leads to improved surface finish and process stability in both external and internal turning. As part of a system — insert, matched external holder or boring bar, shim/clamping set and replacement screws — the component is suited for workpieces where steady cutting and controlled chips are essential. Selecting the correct chipbreaker and grade in relation to workpiece support and cutting parameters ensures predictable results and extended edge life. For tailored cutting strategies using Tungaloy’s CVD-coated T9215 grade, contact Metav Werkzeuge for application advice and technical data at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6772237 Manufacturer SKU: TUN6772237 Label: DNMG150608 T9215 Tungaloy-Wendeplatte Facts Thickness: 6.35 mm Size: 15 mm Corner radius: 0.8 mm Angle: 55° Relief angle: 0° Special features CVD-coated carbide (T9215) Double-sided chipbreaker Rhombic insert with cylindrical hole ISO-compliant indexable turning insert series Application: external and internal turning System components: insert, holder/boring bar, shim/clamping set, spare screws Suited to continuous to slightly interrupted cuts FAQ What materials is this insert best suited to machine? The DNMG150608 T9215 insert is optimised for medium steel; the CVD-coated carbide grade provides high wear resistance and reliable performance during steel turning operations. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker on this indexable insert promotes stable chip formation, reducing chip interference and aiding consistent surface finish and process reliability. Is the insert compatible with standard ISO holders? Yes, the DNMG150608 design follows ISO geometry conventions; compatibility depends on matching form, relief angle, tolerance and thickness with the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance and a 55° rhombic geometry for consistent, high-productivity turning of medium steels; order the insert directly via Metav Werkzeuge or consult the advisors for process matching. DNMG 150608 T9215 — Indexable turning insert, CVD-coated carbide (Tungaloy) The DNMG150608 T9215 is an ISO-standard indexable insert designed for external and internal turning of medium steels, offering a robust balance of wear resistance and fracture toughness for continuous to slightly interrupted cuts. ISO-standard rhombic 55° geometry CVD-coated carbide, grade T9215 Double-sided chipbreaker, with cylindrical hole 0.8 mm corner radius for versatile turning Higher throughput through a wear-resistant grade The grade combination of CVD-coated carbide and grade T9215 is formulated for medium steel machining, delivering elevated wear resistance while maintaining fracture toughness. This means longer tool life under stable cutting conditions and fewer insert changes, which supports a measurable rise in machine uptime. The coating reduces flank and crater wear in sustained cuts, so machining cycles for production runs can be planned with greater predictability and lower tooling cost per part. Geometry engineered for repeatable surface quality A 55° rhombic geometry with a 0.8 mm corner radius provides a reliable compromise between strength and finishing capability: the acute geometry supports versatile turning operations while the corner radius helps produce consistent surface finishes on shafts and shoulders. The insert's double-sided chipbreaker improves chip control across feed ranges, and the cylindrical hole ensures positive and consistent clamping when paired with the correct holder. Compatibility is governed by form, relief angle, tolerance class, clamping method, size and thickness, which facilitates straightforward integration into existing tool systems. Practical system benefits for workshop efficiency The insert is part of an ISO system build: an indexable insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws. This modular approach simplifies inventory management and reduces set-up time. For series production, the combination of grade T9215 and the insert's geometry supports efficient material removal at higher cutting lengths, especially in continuous to slightly interrupted cuts, lowering cycle times and improving overall process economy. The robust substrate also offers stable cutting edges under elevated feed and speed, aiding consistent part quality. Contact Metav Werkzeuge for specification advice, availability and application matching for the Tungaloy DNMG150608 T9215 indexable insert — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6772277-Tungaloy Manufacturer SKU: TUN6772277 Manufacturer article number: 6772277 Model series: ISO turning indexable inserts Core data Included angle: 55° Corner radius: 0.8 mm Relief angle: 0° Thickness: 6.35 mm Size: 15 mm Special features CVD-coated carbide, grade T9215 Double-sided chipbreaker Rhombic plate, 55° Cylindrical hole Application: turning (external and internal) Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert best suited for? The Tungaloy DNMG150608 T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade T9215 balances wear resistance and toughness for high-productivity turning. Which toolholders are compatible with this ISO insert? Compatibility depends on the holder's form, relief angle, tolerance class, clamping and size; the DNMG150608 insert fits holders designed for ISO rhombic 55° inserts with 15 mm inscribed circle and 6.35 mm thickness. How does the chipbreaker affect performance? The double-sided chipbreaker on this insert improves chip control across a range of feeds, reducing chip entanglement and promoting consistent surface finish when machining with the recommended parameters. How many indexable sides are usable on the insert? The insert is double-sided, allowing for multiple reindexes before replacement; this extends productive life over single-sided designs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215 and a rhombic 55° geometry for reliable chip control and consistently high productivity; the insert offers 0° clearance and a cylindrical locating hole for secure clamping in ISO holders. Order the inserts via Metav Werkzeuge or consult our specialists for application-specific recommendations and cutting data. DNMG150608 T9215 – ISO turning insert for turning, Tungaloy The DNMG150608 T9215 is an ISO-standard indexable insert optimised for medium steel turning, delivering a balance of wear resistance and fracture toughness for continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 Suitable for medium steel machining Rhombic form with 55° cutting angle Double-sided chipbreaker, cylindrical hole High productivity and wear resistance for medium steel The T9215 grade is a CVD-coated carbide designed as the first choice for mid-range steel applications, combining high wear resistance with good fracture toughness. This composition supports extended tool life under sustained operation, which translates into fewer indexings and more consistent cycle times. The result is measurable efficiency gains on production runs where repeatability and surface quality matter. Secure clamping and geometry that supports stable machining Compatibility with a toolholder is determined by form, relief angle, tolerance class, fastening method, size and thickness; the insert’s rhombic form and cylindrical locating hole ensure precise seating and repeatable positioning. The listed 0° clearance and 55° approach angle promote a favourable cutting geometry that reduces radial cutting forces, aiding stability in both external and internal turning operations. This clarity on geometry simplifies holder selection in ISO systems. Controlled chips and process reliability in continuous cuts The double-sided chipbreaker is tuned for continuous to light interrupted cuts, providing predictable chip shaping and evacuation. Predictable chip behaviour reduces the risk of built-up edge and improves surface finish, while the CVD coating supports higher cutting speeds with stable edge retention. For workshop environments aiming to increase throughput without compromising repeatability, this insert offers a practical combination of performance and process security. For availability and tailored application advice on Tungaloy DNMG150608 T9215 turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for rapid, application-oriented support Technical data Article number: 6772280 Manufacturer: Tungaloy Manufacturer SKU: TUN6772280 SKU: 6772280-Tungaloy Designation: DNMG150608 T9215 Model series: ISO indexable turning inserts Application: Turning Facts Radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Special features CVD-coated carbide (T9215) Rhombic plate form Double-sided chipbreaker Cylindrical locating hole ISO-standard insert Suitable for continuous to light interrupted cuts Intended for medium steel machining FAQ What materials is this insert suited for? The DNMG150608 T9215 insert is intended primarily for medium steel machining; the CVD-coated carbide T9215 balances wear resistance and toughness for productive steel turning. How does the insert locate in a holder? The insert uses a cylindrical locating hole and rhombic form for precise seating; compatibility is defined by form, relief angle, tolerance class, fastening, size and thickness for ISO holders. Which cutting conditions suit this grade best? This grade performs well at moderate to high cutting speeds in continuous and light interrupted cuts, where the coating and substrate deliver sustained edge life and process stability. Is the chipbreaker suitable for through-feed turning? The double-sided chipbreaker is optimised for effective chip control in continuous turning and light interruptions, improving evacuation and surface finish. What identifies this product on orders and inventory? This item is listed as DNMG150608 T9215 with manufacturer article number 6772280 and manufacturer SKU TUN6772280 for clear ordering and stock management. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, robust fracture protection and a stable 55° rhombic geometry that supports productive turning cycles; arrange procurement directly through Metav Werkzeuge or consult the technical team for process‑specific advice. DNMG 150608 T9215 turning insert — CVD-coated carbide, 55° rhombic | Tungaloy The DNMG 150608 T9215 is an ISO‑standard indexable insert for external and internal turning, designed for medium steel machining with a balance of wear resistance and toughness. CVD-coated carbide for mid-range steel 55° rhombic geometry for versatile turning Double-sided chipbreaker, cylindrical hole design 0.8 mm corner radius, 6.35 mm thickness for stability Productive performance for medium steel turning The CVD‑coated carbide grade combines wear resistance with reliable fracture resistance, enabling higher metal removal rates in continuous to lightly interrupted cuts. For shop floors focused on throughput, this insert offers a predictable life cycle under stable clamping and cutting conditions. The coated surface reduces adhesive wear and supports consistent edge integrity, which translates into fewer insert changes and steadier process times during series production. Precision geometry and secure mounting reduce downtime A 55° rhombic geometry with a cylindrical hole and standard ISO form facilitates compatibility with a wide range of holders; the mechanical fit is governed by form, relief angle, tolerance class, fastening and thickness. The double-sided chipbreaker permits two usable cutting edges per index, improving economy and lowering inventory requirements. Clear definition of relief (0°) and the stable hole design support fast, repeatable indexing and minimal setup time for turning centres. Stable chip control and dimensional stability in operation The combination of a 0.8 mm corner radius and 6.35 mm thickness provides rigidity at the cutting edge, reducing vibration and improving surface finish in external and internal turning tasks. The integrated chipformer promotes stable chip formation, helping evacuate swarf effectively and reducing the risk of built‑up edge. As a result, finishing passes are more consistent and tool life extends under moderate to demanding feed and speed settings, making the insert well suited to machining components from medium‑grade steels. Contact Metav Werkzeuge for tailored application advice or a process review for the Tungaloy DNMG 150608 T9215 indexable insert — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6796038 Manufacturer SKU: TUN6796038 Model series: ISO turning indexable inserts Material: Cemented carbide Facts Geometry angle: 55° Size: 15 mm Thickness: 6.35 mm Corner radius: 0.8 mm Relief angle: 0° Hole: with hole Hole style: cylindrical Special features Grade: T9215 Coating: CVD Chipbreaker: double-sided Shape: rhombic Application: external and internal turning Compatible holders: ISO form, matching relief, tolerance and fastening FAQ Which materials is this insert suited for? The T9215 grade in the DNMG 150608 insert is optimised for medium steel machining and performs best in continuous to slightly interrupted cuts. Can the insert be used on both external and internal operations? Yes, the DNMG 150608 T9215 indexable insert is designed for both external and internal turning, with a rhombic 55° geometry that suits a variety of toolholders. Is the insert reversible and how many cutting edges are available? The double‑sided chipbreaker provides two indexable edges per insert, allowing economical edge changes and straightforward reindexing. What are the key dimensions and the SKU for ordering? Corner radius 0.8 mm, thickness 6.35 mm, size 15 mm; SKU TUN6796038 and article number 6796038. How does the CVD coating help in practice? The CVD coating on the T9215 grade increases wear resistance and supports stable edge life, which improves productivity and reduces the frequency of tool changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, stable cutting performance and ISO compatibility for consistent productivity in turning operations; order directly via Metav Werkzeuge or ask our consultants for grade and chipbreaker selection. DNMG 150608 T9215 — Turning insert (DNMG) by Tungaloy DNMG150608 T9215 Tungaloy insert for ISO-standard external and internal turning, designed as a rhombic, double-sided insert for medium steel machining. ISO DNMG format, 55° cutting angle CVD-coated carbide T9215 for wear resistance Double-sided with cylindrical hole 0° clearance angle for stable cutting Consistent production through a wear‑resistant grade and robust substrate The CVD‑coated T9215 grade is formulated for carbide substrates to balance wear resistance and fracture toughness, which supports high productivity under continuous to lightly interrupted cuts. This combination reduces edge chipping and extends tool life, so cycle times stay predictable and replacement intervals are longer. Selecting a grade with these properties means fewer interruptions for tool change and improved process stability when machining medium‑hard steels. Faster setup and dependable clamping for repeatable accuracy An ISO-standard rhombic geometry with a cylindrical hole and standard dimensions ensures compatibility with a broad range of DNMG holders; holder fit depends on form, clearance, tolerance class, fixing method, size and thickness. The rhombic shape with a 55° cutting angle provides versatile approach angles for external and internal turning while the double-sided design offers economical indexable use. These features together help reduce setup time and maintain repeatable cutting conditions across batches. Practical application advice for optimal surface and tool life For stable results when turning steel, pair the 0° clearance geometry and a 0.8 mm corner radius with a chipbreaker suited to part rigidity and machining parameters; the insert’s double-sided chipbreaker supports economical use while preserving edge integrity. For interrupted cuts or reduced rigidity, slower feeds or a softer chip control may be chosen to limit shock. If material or process conditions change, adjust feed, depth of cut and coolant strategy to exploit the T9215 coating’s durability while protecting the cutting edge. For production-critical turning tasks, request a tailored recommendation from Metav Werkzeuge — contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 to select the correct grade and chipbreaker for optimal results Technical data Article number: 6772218 Manufacturer SKU: TUN6772218 SKU: 6772218-Tungaloy Label: DNMG150608 T9215 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Application: Turning Facts Corner radius: 0.8 mm Insert size: 15 mm Thickness: 6.35 mm Cutting angle: 55° Clearance angle: 0° Special features Material: Carbide Grade/coating: T9215, CVD-coated Chipbreaker: Double-sided Hole: Cylindrical hole (with hole) Shape: Rhombic ISO designation: DNMG150608 Suitable for external and internal turning FAQ What materials is this insert optimised for? The T9215 grade is optimised for medium steel machining; the CVD-coated carbide substrate of the DNMG150608 insert offers high wear resistance and good toughness for productive steel turning. Is the insert compatible with standard DNMG holders? Compatibility with a holder is determined by the DNMG form, clearance, tolerance class, fixing method, size and thickness; the DNMG150608 conforms to ISO DNMG dimensions for broad holder compatibility. How does the double-sided design affect cost-efficiency? A double-sided insert provides two usable cutting edges, improving economy per insert and allowing straightforward indexing when one edge reaches wear limits. Which chipbreaker should be chosen for interrupted cuts? For interrupted cuts and unstable setups a chipbreaker with conservative chip control is advised; the DNMG150608 offers a double-sided chipbreaker that can be matched to workpiece stability and machining type. What does the 0.8 mm corner radius influence in practice? A 0.8 mm corner radius balances edge strength and surface finish; larger radii increase edge stability, while smaller radii allow finer detail and reduced cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, reliable fracture toughness and ISO compatibility to keep turning operations productive and predictable; order the insert via Metav Werkzeuge or consult our advisers for application support. DNMG150608 T9215 – ISO rhombic turning insert for external and internal turning by Tungaloy (CVD-coated carbide, 55°) The DNMG150608 T9215 is an ISO-standard rhombic turning insert designed for efficient external and internal turning, offering a CVD-coated cemented carbide grade engineered for wear resistance and fracture reliability in medium steel machining CVD-coated carbide grade T9215 Rhombic shape, 55° cutting angle 0.8 mm corner radius Cylindrical-hole fixing, double-sided chipbreaker Optimised productivity for medium steel turning The CVD-coated T9215 grade provides a balanced combination of wear resistance and fracture toughness, making it particularly suitable for medium steel applications where sustained tool life matters. The chemical vapour deposition layer increases oxidation resistance and reduces flank wear under typical cutting temperatures, which translates into fewer insert changes and steadier cycle times. For continuous to slightly interrupted cuts the geometry and coating work together to maintain cutting edge integrity, supporting stable, high-productivity turning operations. Secure clamping and ISO conformity to reduce set-up risk Designed as an ISO-standard insert, compatibility with holders is determined by form, free angle, tolerance class, fixation, size and thickness. The rhombic plate with a 55° cutting angle and cylindrical-hole fixing delivers a reliable seating and repeatable clamping force, reducing vibration and rework. The 15 mm inscribed circle and 6.35 mm plate thickness ensure mechanical stability in standard external and internal holders, while the double-sided chipbreaker enables reversal for economical use of the cutting edges. Consistent surface finish and controlled cutting forces A 0.8 mm corner radius delivers a compromise between tool strength and surface quality: larger radii improve edge life and damp cutting forces, smaller radii allow finer detail and lower cutting forces. The rhombic geometry and chipbreaker design combine to evacuate chips effectively, which supports a consistent surface finish on turned parts and helps maintain predictable tool life. Where improved dimensional accuracy is required, selecting the correct feed and radius reduces the need for subsequent finishing passes. Practical selection advice for process planners Choose the appropriate chipbreaker and insert grade to match workpiece material, cutting conditions and machine stability. For medium steels the T9215 grade is a first choice for productive cutting with good edge life; for heavier interruptions or harder materials consider alternative grades. The system comprises the ISO insert, a matching external holder or boring bar, a seat and clamping set plus replacement screws. If compatibility with a specific holder is uncertain, verify form, free angle and thickness against the holder specification before fitting. For additional technical data or application recommendations, Metav Werkzeuge provides machining support by email or phone. For dependable, high-productivity turning choose the Tungaloy DNMG150608 T9215 insert and contact Metav Werkzeuge for tailored selection and availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6772270 Manufacturer SKU: TUN6772270 SKU: 6772270-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: DNMG150608 T9215 Tungaloy insert Material: Cemented carbide Numbers / Core technical data Size (inscribed circle): 15 mm Plate thickness: 6.35 mm Corner radius: 0.8 mm Cutting angle: 55° Free angle: 0° Hole: with hole (cylindrical) Designs / Special features Rhombic plate form CVD-coated carbide (T9215) Double-sided chipbreaker Suitable for external and internal turning Compatible with ISO turning holders Recommended for continuous to slightly interrupted cuts FAQ What materials is this insert best suited for? The T9215 grade is engineered for medium steel machining; the DNMG150608 T9215 insert combines wear resistance and toughness for productive cutting of these materials. Is the insert reversible to use both edges? Yes, the insert has a double-sided chipbreaker and is reversible, allowing economical use of both cutting edges before replacement. How is compatibility with a toolholder ensured? Compatibility depends on the insert form, free angle, tolerance class, fixation, size and thickness; verify these parameters against the holder specification when selecting the matching clamping set. What benefits does the T9215 CVD coating provide? The CVD-coated T9215 grade delivers enhanced oxidation resistance and reduced flank wear, improving edge life and process stability during turning. When should the 0.8 mm corner radius be used? The 0.8 mm corner radius is a versatile choice for balancing tool life and surface finish in general turning tasks, especially when moderate edge strength and good finish are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance and fracture toughness offered by the CVD‑coated T9215 grade for efficient medium‑steel turning; the double‑sided chipbreaker and ISO sizing ensure predictable tool life and smooth changeover. Order directly via Metav Werkzeuge or consult our specialists for application advice. DNMG 150608 T9215 turning insert by Tungaloy — ISO rhombic insert for productive turning A DNMG150608 T9215 indexable turning insert designed for ISO‑standard holders, optimised for external and internal turning in medium steel under continuous to light interrupted cuts ISO‑standard rhombic DNMG insert CVD‑coated carbide T9215 Double‑sided chipbreaker 0.8 mm corner radius Cylindrical hole version Consistent productivity through a wear‑resistant grade The core advantage of this CVD‑coated, carbide insert is a balance between wear resistance and fracture toughness, making it a dependable choice for mid‑range steel applications where uptime matters. The T9215 grade is formulated to extend edge life under steady cutting conditions while still coping with light interruptions without catastrophic chipping. As a result, machining centres and job shops gain extended tool life, fewer insert changes and reduced unplanned downtime — clear savings in operating costs and process consistency. The coated surface also improves performance at elevated cutting speeds, helping to maintain dimensional accuracy across longer production runs. Rapid integration and predictable holder compatibility The insert follows ISO geometry conventions, so compatibility with holders is governed by form, relief angle, tolerance class, fastening, size and thickness. The rhombic shape with a 55° included angle and a 0° relief angle suits a wide range of external and internal turning setups. The presence of a cylindrical hole and standard mounting dimensions simplifies locating the indexable plate in the pocket, while the double‑sided chipbreaker provides two cutting edges per index, improving cost‑per‑edge economics. For selection, match the chipbreaker and grade to workpiece stability and cutting conditions; stable setups enable exploitation of the grade’s durability and deliver consistent surface finish. Geometry and handling that reduce cycle time and risk With a 0.8 mm corner radius and a plate thickness of 6.35 mm, the geometry supports robust cutting while maintaining control over cutting forces and edge strength. The rhombic form permits multiple approach angles, giving process engineers flexibility to tune feeds and depths for optimal metal removal rates. The insert’s double‑sided design halves tooling inventory requirements, and the combination of standard ISO sizing with a proven coating system helps to lower the total cost of ownership. Confidence in repeatable performance means fewer interruptions for tool checks and a steadier flow through the machining line. For production teams seeking consistent, economical turning performance with Tungaloy’s T9215 grade, contact Metav Werkzeuge for tailored advice or to place an order — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6772243 SKU: 6772243-Tungaloy Manufacturer SKU: TUN6772243 Model series: ISO‑Drehwendeschneidplatten Designation: DNMG150608 Facts Corner radius: 0.8 mm Insert size: 15 mm Thickness: 6.35 mm Included angle: 55° Relief angle: 0° Hole: with cylindrical hole Chipbreaker: double‑sided Special features Coating: CVD‑coated Material: carbide Grade: T9215, for medium steel machining Application: turning (external and internal) ISO‑standard geometry for predictable compatibility FAQ What materials is this insert intended for? The DNMG150608 T9215 turning insert is optimised for medium steel, with a CVD‑coated carbide grade that balances wear resistance and toughness for productive steel machining. Is the insert compatible with standard ISO holders? Yes. The plate follows ISO dimensions and mounting conventions; compatibility depends on form, relief angle, tolerance class, fastening, size and thickness to match the pocket and clamp system. How does the chipbreaker influence performance? The double‑sided chipbreaker provides two usable edges and assists chip control in continuous to light interrupted cuts, improving edge life and reducing the risk of built‑up edge when machining steel. Can this insert be used for interrupted cuts? The T9215 grade is suitable for continuous and light interrupted cuts; for heavy interruptions, consider a grade or geometry tailored specifically for increased impact resistance. What geometry advantages does the DNMG150608 offer? The rhombic shape with a 55° included angle and a 0.8 mm corner radius allows flexible approach angles, robust edge strength and adaptable cutting conditions for various turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide (T9215) for high wear resistance, a rhombic 55° geometry for versatile turning, and a 0.8 mm corner radius for reliable edge life; order the insert directly via Metav Werkzeuge or contact our advisers for selection support. DNMG 150608 T9215 turning insert by Tungaloy — CVD-coated carbide, rhombic 55° geometry DNMG150608 T9215 Tungaloy insert for medium Stahl turning, designed for continuous to lightly interrupted cuts and compatible with ISO toolholders DNMG150608 format, ISO-compliant geometry CVD-coated carbide (T9215) for medium Stahl 0.8 mm corner radius for consistent edge strength Double-sided chipbreaker, cylindrical hole design Consistent productivity through CVD-coated carbide and geometry The T9215 grade combines a CVD-coated carbide substrate with a balanced microstructure to deliver high wear resistance alongside good fracture toughness. For medium Stahl machining, this results in longer tool life under continuous cut conditions and reliable performance during slight interruptions. The rhombic 55° geometry provides a favourable approach angle that balances cutting forces and surface finish; this geometry is particularly suitable for both external and internal turning operations. CVD stands for chemical vapour deposition and describes a hard, wear-resistant coating that reduces flank and crater wear, helping to maintain dimensional accuracy over longer production runs. Simple integration with ISO tooling systems Compatibility is ensured by ISO conformity: form, clearance, tolerance class, fastening, size and thickness determine the correct match with the holder. The insert features a cylindrical hole and a 6.35 mm plate thickness, allowing secure clamping in standard ISO turning holders and boring bars. A typical system comprises the insert, a matched outer holder or boring bar, a locating pad or clamp set, and replacement screws; understanding these interface elements reduces setup time and increases machine uptime. The 0° clearance angle and standard DNMG150608 footprint make it straightforward to substitute in existing tool assemblies without requalifying the entire process. Predictable edge life and surface quality from geometry and chip control The 0.8 mm corner radius offers a robust cutting edge that resists chipping while supporting a consistent surface finish. Combined with the double-sided chipbreaker, material flow is stabilised across different cutting depths, which improves swarf evacuation and reduces the risk of re-cutting. For manufacturers aiming for repeatable component quality and lower per-part tooling cost, these features translate into fewer tool changes and steadier metrology results. Note that selecting the appropriate chipbreaker and grade for the specific workpiece and machining stability remains essential to exploit the insert’s full potential. Practical application advice for turning workshops Designed primarily for turning, the insert is suitable for both external and internal operations on medium Stahl components. In practice, choose cutting parameters that leverage the T9215 grade’s wear resistance—moderate to high cutting speeds with controlled feed rates—while ensuring adequate coolant or chip removal strategies. When working with interrupted cuts or reduced-fixture rigidity, the combination of CVD coating and a moderate corner radius helps maintain edge integrity. For new processes, a short qualification run will confirm the best compromise between productivity and tool life. For high-productivity turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for tailored technical advice and application support: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6773894 Manufacturer SKU: TUN6773894 Brand SKU: 6773894-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Approach angle: 55° Plate thickness: 6.35 mm Inscribed circle / size: 15 mm Special features Material: carbide Grade: T9215 Carbide type: CVD-coated carbide Chipbreaker: double-sided Hole: cylindrical hole (with hole) Plate form: rhombic Clearance angle: 0° Application: Turning (external and internal) ISO designation: DNMG150608 FAQ What materials is the insert suitable for? The DNMG150608 T9215 Tungaloy insert is optimised for medium Stahl machining and performs best where a balance of wear resistance and toughness is required. Is the insert compatible with standard ISO holders? Yes, the DNMG150608 geometry and 6.35 mm thickness are ISO-compliant; compatibility depends on holder form, clearance, tolerance class and fastening method. How does the T9215 grade affect tool life? The T9215 grade’s CVD coating increases wear resistance while maintaining fracture protection, resulting in longer and more predictable edge life under continuous to slightly interrupted cutting. Can the insert be used for internal boring as well as external turning? The rhombic 55° geometry and cylindrical-hole configuration make the insert suitable for both external and internal turning operations when mounted in the appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Take advantage of the ISO‑compliant geometry and the T9215 CVD‑coated carbide for productive medium‑steel turning; the double‑sided chipbreaker and 0.8 mm corner radius combine wear resistance with edge stability for continuous to slightly interrupted cuts. Order directly via Metav Werkzeuge or consult our specialists for selection and fast supply. DNMG150608 T9215 — Tungaloy indexable turning insert for medium steel DNMG150608 T9215 is an ISO‑norm insert designed for external and internal turning in medium‑steel applications, compatible with matching holders where form, clearance, tolerance class, fastening, size and thickness align ISO‑standard DNMG geometry, 55° cutting angle CVD‑coated carbide grade T9215 for medium steel Double‑sided chipbreaker for continuous cuts Cylindrical hole, 0.8 mm corner radius, 6.35 mm thickness Increased productivity through wear‑resistant grade and coating The insert is supplied in T9215, a CVD‑coated carbide grade developed for the demands of medium‑steel machining. The coating forms a protective layer that reduces abrasive wear and extends edge life while the substrate retains toughness to resist chipping. For production environments this yields fewer tool changes and higher net machining time, making productive machining and process stability the primary advantages. Straightforward fitting and reduced changeover times Supplied in the ISO DNMG geometry, the plate integrates into common external or internal turning toolholders when the form, 0° relief, tolerance class, fastening and thickness match. The cylindrical hole and double‑sided format allow quick indexing of the cutting edge, decreasing downtime. For operations managing multiple insert types, the ISO format simplifies inventory and ensures predictable seating and clamping forces. Geometry engineered for stable cutting and surface quality The rhombic shape with a 55° approach and a 0.8 mm corner radius provides a balance between edge strength and cutting engagement. The double‑sided chipbreaker supports chip control under continuous to lightly interrupted cuts, translating into improved surface finish and consistent component dimensions. Selecting the correct chipbreaker and radius according to workpiece stability minimises vibrations and maximises repeatable results. Practical application notes for process planning Use the insert where medium‑steel turning calls for a combination of wear resistance and toughness — typical applications include shaft and journal turning, slips and general finishing passes. Matching the insert to a suitable holder and selecting a chipformer adapted to feed, depth of cut and machine rigidity will unlock the material advantages of the grade. For interrupted cuts or unstable set‑ups, consider adapting feed rates or a larger radius to protect the cutting edge. For tailored advice on using Tungaloy’s T9215 grade for efficient medium‑steel turning and to secure fast delivery, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6773932 SKU: 6773932-Tungaloy Manufacturer SKU: TUN6773932 Model series: ISO‑Drehwendeschneidplatten Material: cemented carbide Grade/coating: T9215 (CVD‑coated) Application: Turning Facts Cutting angle: 55° Relief (clearance) angle: 0° Corner radius: 0.8 mm Thickness: 6.35 mm Inscribed circle: 15 mm ISO designation: 150608 Special features Rhombic plate form (DNMG) Double‑sided chipbreaker Cylindrical hole for fastening Suited to continuous to lightly interrupted cuts Compatibility depends on holder form, tolerance and clamping FAQ What materials is this insert suited for? The DNMG150608 T9215 indexable insert by Tungaloy is optimised for medium steel machining and offers a good balance of wear resistance and edge strength for common turning tasks. How does the T9215 coating benefit production? The T9215 CVD‑coated carbide on the DNMG150608 insert reduces abrasive wear and extends edge life, resulting in longer tool cycles and fewer interruptions in production runs. Can the insert be re‑indexed and how many cutting edges are available? The DNMG150608 is double‑sided with a central cylindrical hole, allowing the insert to be flipped and indexed to present fresh cutting edges and reduce replacement frequency. Which insert geometry should be matched to the holder? Compatibility for the DNMG150608 depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; ensure the holder accepts DNMG‑format rhombic plates with a 55° approach. Is the insert suitable for interrupted cuts? The T9215 grade combined with a 0.8 mm corner radius provides improved fracture resistance for light interruptions; heavily interrupted cuts may require different geometry or reduced feed to preserve edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and ISO compatibility for steady productivity and predictable tool life; the robust T9215 grade and 0.8 mm nose radius deliver wear resistance and consistent surface finish, while the ISO system fit ensures straightforward integration — order the insert via Metav Werkzeuge or consult our specialists for application support. DNMG 150608 T9215 Turning Insert by Tungaloy — CVD-coated carbide, 0.8 mm radius The DNMG150608 T9215 is an ISO-indexable turning insert designed for external and internal turning in medium steel applications, combining a rhombic 55° geometry with a cylindrical hole and a double-sided chipbreaker. CVD-coated carbide for high wear resistance ISO-indexable DNMG 150608 geometry 0.8 mm nose radius for consistent profiles Rhombic plate with cylindrical hole for secure fixing Consistent productivity through a wear-resistant grade The combination of a CVD-coated surface and a carbide substrate in the T9215 grade provides a balance of wear resistance and fracture toughness suited to medium steel turning. The coating reduces abrasive wear and thermal degradation, which results in longer effective tool life under continuous or lightly interrupted cuts. For production environments, this translates to fewer insert changes and predictable process windows, supporting higher throughput without compromising component quality. Geometry engineered for repeatable accuracy The rhombic 55° ISO geometry and 0.8 mm nose radius ensure stable contact conditions and repeatable part profiles. The 0° relief angle and 6.35 mm plate thickness give the insert rigidity in the seat, reducing vibration and improving dimensional control. The cylindrical mounting hole and specified tolerance classes promote secure clamping and repeatable indexing, which contributes to consistent surface finish and tighter machining tolerances on turned components. System compatibility that simplifies tooling choices As part of the ISO turning insert family, this indexable plate fits a broad range of holders and boring bars when matched by form, relief angle, tolerance class, fastening method, size and thickness. The double-sided design offers multiple cutting edges per insert, increasing economy per index. Selecting the appropriate chipbreaker style and holder geometry enables optimisation for either roughing or finishing tasks, so the insert becomes a flexible component within a modular tooling system rather than a single-use item. Practical guidance for reliable application The insert is intended primarily for medium steel turning and performs best with cutting parameters aligned to continuous or slightly interrupted cuts; the double-sided chipbreaker aids in chip control across typical feeds and depths of cut. For secure clamping, confirm holder compatibility with the DNMG 150608 form and use the correct torque on replacement screws. When replacing inserts, inspect the seat and clamping surfaces for damage to retain the system’s repeatability and to preserve the expected performance benefits of the T9215 grade. For tailored advice on integrating Tungaloy T9215 inserts into machining processes or to order the DNMG150608 insert, contact Metav Werkzeuge via eMail info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants support application selection and supply. Technical Data Article number: 6772249 Manufacturer SKU: TUN6772249 SKU: 6772249-Tungaloy Facts Nose radius: 0.8 mm Approach angle: 55° Relief angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Special features Grade: T9215 (CVD-coated carbide) Shape: rhombic, 55° Hole: cylindrical, with hole Chipbreaker: double-sided Application: external and internal turning ISO-indexable insert; compatibility defined by form and tolerance FAQ What materials is this insert suited to machine? The DNMG150608 in T9215 grade is optimised for medium steel machining; the CVD-coated carbide balances wear resistance and toughness for continuous to lightly interrupted turning. How many cutting edges are available per insert? This rhombic DNMG insert is double-sided, providing multiple usable cutting edges per index to improve economy for the turning operation. Is the insert compatible with standard ISO holders? Compatibility depends on matching the insert form, relief angle, tolerance class, fastening and thickness; the DNMG150608 is designed for ISO-indexable holders that accept DNMG geometry. What does the T9215 grade indicate? T9215 denotes a CVD-coated carbide grade tuned for medium-steel applications, offering high wear resistance combined with fracture safety for productive machining. Are there special clamping requirements for secure use? Use holders specified for DNMG plates, ensure the cylindrical hole and seat are clean and undamaged, and apply the correct fastening torque to maintain repeatability and safe clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide (T9215), robust ISO geometry and secure clamping for higher productivity and predictable tool life; order the insert directly via Metav Werkzeuge or consult the technical team for application support. DNMG150608 T9215 — Indexable turning insert for medium steel, CVD-coated, 55° geometry by Tungaloy DNMG150608 T9215 is a rhombic, ISO-standard indexable insert designed for turning applications; it is optimised for medium steel machining and suited to both external and internal turning. CVD-coated cemented carbide for wear resistance ISO DNMG150608 rhombic geometry, 55° lead angle Double-sided chipbreaker for versatile chip control Cylindrical hole for secure, repeatable clamping Higher throughput through wear-resistant grade and stable geometry The combination of a CVD-coated surface and a tough cemented carbide substrate in grade T9215 delivers a balance of abrasion resistance and fracture toughness, tailored to medium steel turning. This enables sustained cutting at elevated speeds with fewer tool changes, improving overall machine uptime. The 55° rhombic lead angle contributes to a favourable cutting direction and consistent chip evacuation, while the 0.8 mm corner radius helps achieve a compromise between edge strength and surface finish. Predictable clamping and ISO compatibility for fast changeovers Designed to the ISO DNMG form, the insert matches standard holders when form, relief angle, tolerance class, fastening method, size and thickness align. The cylindrical hole and 6.35 mm plate thickness ensure secure seating and repeatable positioning in the toolholder, reducing setup variability. With clearly defined dimensions and standard fixation, changeovers and inventory management become more efficient, supporting lean production routines. Process stability and surface quality from chip control and coating technology A double-sided chipbreaker gives flexibility across feed and depth ranges, promoting manageable chip forms and lowering the risk of built-up edge. The CVD coating provides a hard, heat-resistant layer that reduces adhesive wear and helps maintain edge integrity under continuous or slightly interrupted cuts. For manufacturers targeting consistent part quality, the cutting grade supports reproducible surface finishes and reliable tool life when paired with appropriate cutting parameters. Clear selection criteria and system considerations for successful integration Selecting the correct insert requires matching form, 0° clearance angle, fastening style and thickness to the holder and the intended operation. The cutting system comprises the insert, an appropriate external holder or boring bar, a supporting shim or clamp set, and replacement screws; using correct components is essential for achieving the quoted repeatability and performance. For tailored cutting data, machining windows or parameter tables, technical documentation and application advice are available from Metav Werkzeuge to ensure optimal integration. Contact Metav Werkzeuge for individual application recommendations on the Tungaloy T9215 inserts and secure procurement at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6774108-Tungaloy (SKU) Manufacturer article number: 6774108 Manufacturer SKU: TUN6774108 Manufacturer: Tungaloy Material: Cemented carbide Core data ISO designation: DNMG150608 Grade: T9215 (CVD-coated) Plate form: Rhombic, 55° lead angle Corner radius: 0.8 mm Plate thickness: 6.35 mm Plate size: 15 mm Relief/clearance angle: 0° Hole: with cylindrical hole Chipbreaker: Double-sided Special features Model series: ISO turning indexable inserts Typical application: External and internal turning of medium steel System components: Insert, suitable external holder or boring bar, shim/clamp set, replacement screws Schneidstofftyp: CVD-coated carbide for improved wear resistance and edge strength Compatibility determined by form, relief, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The DNMG150608 T9215 insert from Tungaloy is optimised for medium steel machining; the T9215 grade combines wear resistance and toughness for productive, continuous or lightly interrupted cuts. How does the CVD coating affect performance? The CVD-coated layer on the T9215 grade increases abrasion resistance and thermal stability, prolonging edge life and supporting higher cutting speeds when the DNMG150608 plate is used under recommended conditions. Is the insert reversible and how many effective cutting edges are available? The insert is double-sided with a chipbreaker on each side; flipping to the secondary edge provides additional usable cutting edges, improving cost-effectiveness per insert. What ensures secure mounting of the insert in the holder? The DNMG150608 features a cylindrical hole and standard thickness for positive seating; correct use of the matching clamp, shim and screws maintains clamping stability and repeatable positioning in standard DNMG holders. Can this insert be used for internal boring as well as external turning? Yes, the ISO rhombic geometry and robust grade make the DNMG150608 suitable for both external and internal turning operations when paired with the correct boring bar or holder and appropriate cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9225, double-sided chipbreaker and a 55° geometry for stable, productive turning of medium to heavy steels; order the insert directly via Metav Werkzeuge or contact our consultants for tailored advice. DNMG150608 T9225 — Tungaloy ISO Turning Insert (CVD-coated carbide, 55°) DNMG150608 T9225 is an ISO rhombic turning insert for accurate external and internal turning applications, engineered for medium to heavy steel machining. ISO rhombic insert, 55° cutting geometry CVD-coated carbide for improved toughness Double-sided chipbreaker for consistent chip control Compatible with standard DNMG holders Consistent performance for medium to heavy steel turning The CVD-coated carbide grade T9225 combines toughness and wear resistance to cope with changing engagement conditions and light interruptions in the cut. This ISO rhombic insert with a 55° cutting geometry provides a balance between cutting edge strength and access to shoulders, delivering predictable tool life and steady metal removal rates. The 0.8 mm corner radius supports robust edges for stable finishes while reducing the risk of premature chipping during interrupted cuts. Secure clamping and reliable chip control for smoother cycles A double-sided chipbreaker and a cylindrical hole ensure repeatable positioning and stable clamping in compatible DNMG holders. The plate thickness of 6.35 mm and the rhombic form contribute to secure seating and reduced vibration at the tool–workpiece interface. For operations where cycle time and surface consistency matter, these geometric factors translate directly into fewer tool changes and improved process reliability on production lines. Practical selection and application guidance for reliable results When specifying an insert for turning, match the chipbreaker and grade to the workpiece and machining conditions: the T9225 grade is designed as a robust universal for steel, making it suitable where mixed conditions require extra toughness. Choose the appropriate holder based on form, clearance angle (0° specified), tolerance class, and thickness to ensure correct fit and clamping. For concise setup and long runs, the combination of CVD coating and engineered chip control reduces wear-related variability and supports consistent surface quality. For availability and technical guidance on Tungaloy inserts contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application-focused advice and supply Technical Data Article number: 6780726 Manufacturer SKU: TUN6780726 Our SKU: 6780726-Tungaloy Model series: ISO-Drehwendeschneidplatten Dimensions & key specs Cutting angle: 55° Corner radius: 0.8 mm Plate thickness: 6.35 mm Plate size: 15 mm Materials & special features Material: CVD-coated carbide (T9225) Plate geometry: rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning (external and internal) Clearance angle: 0° ISO designation: DNMG150608 FAQ What materials is this insert suitable for? The DNMG150608 T9225 insert is formulated primarily for steel machining and performs well across medium to heavy steel applications where toughness is required. How does the chipbreaker influence performance? The double-sided chipbreaker on this turning insert improves chip control and promotes stable cutting conditions, which helps to extend tool life and maintain surface quality. Which holders are compatible with the DNMG150608 insert? Compatibility is determined by form, clearance angle, tolerance class, fastening and plate thickness; DNMG-style external and internal holders designed for 55° rhombic inserts are typically suitable for this type. Is the grade T9225 suited to interrupted cuts? Yes, the T9225 CVD-coated carbide is a robust universal grade that offers additional toughness for slightly interrupted cuts and variable engagement conditions. What is the corner radius and why does it matter? This insert has a 0.8 mm corner radius; a larger radius increases edge strength and can improve surface finish, while smaller radii allow finer detail—select the radius to match the machining requirement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness, the T9225 universal grade and the ISO DNMG150608 format with a 0.8 mm corner radius for stable, productive turning of medium to heavy steels — order the DNMG150608 T9225 insert directly via Metav Werkzeuge or consult our specialists if clarification is needed DNMG150608 T9225 DNMG turning insert — CVD-coated carbide, rhombic, 0.8 mm radius — Tungaloy DNMG150608 T9225 is a rhombic ISO turning insert designed for medium-to-heavy steel turning, offering robust chip control and consistent edge life Robust CVD-coated carbide grade T9225 ISO DNMG150608 rhombic geometry 0.8 mm corner radius for strength Double-sided insert with cylindrical hole Increase throughput with a tougher universal grade The combination of a CVD-coated surface and carbide substrate delivers wear resistance and edge stability that help maintain cycle times under demanding conditions. The T9225 grade is formulated as a robust universal solution for medium-to-heavy steel machining where variable engagement or slightly interrupted cuts require increased toughness. Choosing this configuration reduces the need for frequent insert changes and supports uninterrupted production, while the 0.8 mm corner radius improves resistance to edge chipping without compromising profile accuracy. Clear compatibility and secure clamping for reliable setup Compatibility with toolholders depends on geometry parameters such as form, clearance angle 0°, tolerance class, fastening, size and thickness 6.35 mm. The insert features a cylindrical hole and a rhombic shape that suit a wide range of ISO holders and boring bars; the system typically comprises the ISO turning insert, a matching external holder or boring bar, an underlay/clamping set and replacement screws. This clarity of dimensions and fixation reduces setup time and helps ensure a secure, repeatable mounting for consistent cutting performance. Coating and chip control explained for predictable results A CVD coating provides a hard, wear-resistant layer that preserves the cutting edge at elevated temperatures, improving tool life during continuous and semi-continuous operations. The integrated double-sided chipbreaker supports controlled chip formation and evacuation, which contributes directly to surface finish and machine uptime. For workshops seeking dependable, predictable results, the focus on stable chip formation and a grade engineered for mixed engagement conditions delivers lower process variation and greater confidence in meeting production tolerances. For tailored holder recommendations and to order the Tungaloy DNMG150608 T9225 insert, contact Metav Werkzeuge for application-specific advice and procurement via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Designation: DNMG150608 Manufacturer article number: 6780965 SKU: 6780965-Tungaloy Manufacturer SKU: TUN6780965 Brand: Tungaloy Facts Corner radius: 0.8 mm Included angle: 55° Clearance angle: 0° Thickness: 6.35 mm Size: 15 mm Hole: with cylindrical hole Grade: T9225 Material: carbide Model series: ISO turning inserts Application: turning Special features CVD-coated cutting surface Rhombic plate form Double-sided chipbreaker Compatibility determined by form, free angle, tolerance class, fastening, size and thickness System: ISO insert, matching external holder or boring bar, underlay/clamping set and replacement screws Typical use: external and internal turning; select chipbreaker and grade to suit workpiece material and cutting conditions FAQ What materials is this insert suitable for? The DNMG150608 T9225 insert is intended primarily for medium-to-heavy steel machining; the T9225 grade offers toughness for variable engagements and light interruptions common in steel turning. Is the insert coated and what is the benefit? Yes, the insert features a CVD-coated surface on a carbide substrate, which increases wear resistance and helps maintain edge life at higher cutting temperatures for more consistent productivity. How is holder compatibility determined? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness 6.35 mm; matching these parameters to the holder ensures secure clamping and repeatable geometry. Does the geometry support internal turning as well as external turning? The rhombic plate form with a cylindrical hole and double-sided chipbreaker is suitable for both external and internal turning operations when paired with the appropriate holder or boring bar. What practical advantage does the 0.8 mm corner radius provide? A 0.8 mm corner radius balances edge strength and component accuracy: it improves resistance to chipping under heavy engagement while still allowing acceptable dimensional control on turned surfaces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150608 T9225 Wendeplatten - Tungaloy
Combining CVD-coated carbide toughness with a robust universal grade (T9225) and a 0.8 mm nose radius, this insert delivers reliable performance for medium-to-heavy steel turning and intermittent cutting. Order directly via Metav Werkzeuge or consult the team for grade and holder matching. DNMG 150608 T9225 Turning Insert (DNMG150608) — CVD-coated carbide by Tungaloy The DNMG150608 T9225 is a CVD-coated turning insert engineered for medium to heavy steel turning, featuring a rhombic 55° geometry, 0° clearance and a double-sided chipbreaker for consistent chip control CVD-coated carbide for enhanced tool life Robust universal grade T9225 Rhombic 55° geometry for versatile turning Double-sided chipbreaker and centre hole Reliable cutting performance under variable conditions The combination of a CVD-coated surface and the T9225 grade provides a balance of hardness and toughness that is well suited to medium-to-heavy steel machining and slightly interrupted cuts. The coating reduces abrasive wear while the substrate offers improved fracture resistance, resulting in longer intervals between tool changes. With a double-sided chipbreaker, chip formation and evacuation are stabilised, which helps to maintain consistent cutting forces and surface finish even when machining steels with varying machinability. Practical mounting and geometric advantages for productive turning Produced to ISO geometry standards, compatibility with toolholders is determined by insert form, clearance specification, tolerance class, fixing method, size and thickness. The rhombic shape with a 55° included angle provides a favourable compromise between reach and strength, while the 0° clearance suits applications requiring low radial engagement. Key dimensions such as an inscribed circle of 15 mm, thickness 6.35 mm and nose radius 0.8 mm mean predictable contact conditions and repeatable part quality when the correct holder and clamping set are used. Choosing the right grade and chip control for reduced costs Selecting a universal grade like T9225 simplifies tooling logistics across varied turning tasks; it is designed for robustness where cutting conditions can change. Fewer grade changes reduce set-up time and inventory complexity, contributing to lower overall machining costs. For best results, match the chipbreaker style and insert geometry to the workpiece material and stability of the set-up — this maximises tool life and minimises unplanned downtime while delivering repeatable surface quality. Contact Metav Werkzeuge for application-specific recommendations, holder compatibility checks and immediate availability — the team will assist with technical matching and order processing. Technical data Article number: 6780931 Manufacturer SKU: TUN6780931 SKU: 6780931-Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts Inscribed circle: 15 mm Thickness: 6.35 mm Nose radius: 0.8 mm Clearance angle: 0° Geometry angle: 55° Special features Grade: T9225 (CVD-coated) Double-sided chipbreaker Rhombic plate form Cylindrical centre hole ISO normed insert for external and internal turning Suitable for medium-to-heavy steel machining FAQ Which materials is this insert intended for? The insert is formulated for medium-to-heavy steel machining; the T9225 grade and CVD-coated carbide base give the toughness required for variable cutting conditions. How is compatibility with a toolholder determined? Compatibility depends on insert form, clearance angle, tolerance class, fixing method, size and thickness; matching these parameters ensures the insert seats correctly and performs as expected. What is the significance of the 0.8 mm nose radius? A 0.8 mm nose radius balances edge strength and finish capability, offering improved corner durability while still delivering acceptable surface quality for many turning tasks. How many cutting edges are available per insert? As a double-sided indexable insert, the item provides multiple usable edges; rotating to a fresh edge restores cutting geometry without a full tool change. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6780931 and the SKU listed is 6780931-Tungaloy, which can be used when specifying or ordering the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com