DNMG 150612 AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide AH120 and precise DNMG geometry for stable chip control and extended tool life. The robust rhombic shape with a 1.2 mm corner radius and 0° clearance delivers predictable turning results and low setup times. Order the insert directly via Metav Werkzeuge or contact their application specialists for tailored advice. DNMG150612 AH120 Tungaloy insert for turning — PVD-coated carbide, rhombic 55° The DNMG150612 AH120 Tungaloy insert is an ISO‑standard rhombic turning insert engineered for reliable chip control and secure clamping in general turning applications. ISO DNMG 150612 geometry for standard holders PVD-coated carbide grade AH120 for long life 1.2 mm corner radius for versatile turning Double‑sided chipbreaker with cylindrical hole Consistent chip control for uninterrupted production The rhombic 55° geometry combined with the double‑sided chipbreaker provides controlled chip formation, reducing interruption and rework. With a cylindrical hole and standard ISO form, the insert ensures repeatable clamping accuracy and predictable cutting forces. Reduced vibration and stable cutting enable higher feed rates where machine and setup stiffness allow, improving cycle time without compromising surface integrity. Coating and grade designed to extend cutting intervals The AH120 grade is a PVD‑coated carbide developed for wear and edge‑chipping resistance; it preserves a sharp edge under interrupted cuts and varying cutting conditions. The coating enhances thermal resistance and adhesion, which helps to maintain tool life on medium‑duty turning operations. For operations demanding a balance of process security and edge stability, this turning grade provides measurable benefits in tool change intervals and overall productivity. Geometry and small radius for versatile part finishing A 1.2 mm corner radius offers versatility between roughing and finishing passes, allowing improved edge strength without sacrificing the ability to achieve tight radii on workpieces. The relatively thin plate at 6.35 mm thickness reduces overhang-induced deflection in compact setups, while the rhombic form supports access to shoulder and profile features. These geometry choices reduce setup time and the need for secondary machining, contributing to overall cost efficiency. ISO compatibility and straightforward tool selection As part of an ISO turning insert series, the component fits a broad range of standard external holders and boring bars; compatibility is determined by insert form, clearance angle, tolerance class, fastening and thickness. The insert's 0° clearance and standard dimensions make holder selection and inventory management simpler. For less experienced planners, Metav Werkzeuge’s technical team can advise on matching chipbreaker style and grade to the workpiece material and machining strategy. For personalised grade selection, application recommendations or to purchase Tungaloy DNMG inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930; their specialists support optimal tool choice and process set-up. Technical data Article number: 6814094 Manufacturer SKU: TUN6814094 SKU: 6814094-Tungaloy Brand: Tungaloy Numbers / Core technical data Size: 15 mm Corner radius: 1.2 mm Plate thickness: 6.35 mm Insert angle: 55° Clearance angle: 0° Manufacturer article number: 6814094 Designs / Special features Material: carbide Coating: PVD Grade: AH120 Shape: rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double‑sided Series: ISO indexable turning inserts Application: turning FAQ What machining operations suit this insert best? The DNMG150612 AH120 Tungaloy insert is intended for general turning operations where a sharp, stable cutting edge and reliable chip control are required. How does the AH120 grade affect tool life? The AH120 PVD‑coated carbide grade enhances wear resistance and edge stability; in the DNMG format it helps extend cutting intervals compared with uncoated grades in similar conditions. Can this insert be used in standard ISO holders? Yes, the DNMG geometry follows ISO standards; compatibility depends on holder form, thickness and fastening, and the insert is designed for use in corresponding external holders and boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of ISO compatibility and the AH6225 PVD-coated carbide grade for dependable stainless steel turning; the rhombic geometry and 55° cutting angle deliver stable cutting and reliable chip control. Order the insert via Metav Werkzeuge or request application advice from their consultants. DNMG150612 AH6225 indexable turning insert — rhombic, 55°, PVD-coated | Tungaloy The DNMG150612 AH6225 is an ISO-format indexable turning insert engineered for external and internal turning operations, optimised for stainless steels and medium cutting conditions ISO rhombic insert, 55° cutting angle PVD-coated carbide grade AH6225 Double-sided insert with cylindrical hole Suitable for external and internal turning Consistent cutting performance with a wear-resistant grade The PVD-coated AH6225 carbide grade combines a sharp, stable cutting edge with good wear resistance under varying conditions. As an ISO-format rhombic insert, the item provides repeatable performance in medium-duty turning of stainless steels, where a balance between edge strength and toughness is required. The coating reduces adhesion and built-up edge on challenging alloys, improving component quality while maintaining cutting efficiency. This results in fewer index changes and predictable tool life, supporting a steady production flow. Geometry and system compatibility that reduce setup time The rhombic DNMG geometry with a 55° approach ensures reliable engagement and accessible relief for many holder designs. The insert’s cylindrical hole and tolerance profile conform to ISO clamping conventions, so replacement and indexing are straightforward within compatible holders and boring bars. Being double-sided, the insert doubles available cutting edges per index, lowering per-edge cost and simplifying inventory management. Clear system compatibility reduces downtime and simplifies holder selection for routine turning tasks. Measurable benefits in component quality and process stability Applied correctly, this insert improves chip control and surface integrity during medium cuts, contributing to consistent surface finish and dimensional repeatability. The built-up edge resistance offered by the PVD-coated grade helps sustain feed and speed settings for longer cycles, while the stable edge reduces vibration risk in less rigid set-ups. For varied production runs, selecting a matching chipbreaker and ensuring stable clamping yields faster cycle times and fewer rework operations. Metav Werkzeuge can advise on the most suitable holder and setup for specific workpiece materials and machining strategies. Contact Metav Werkzeuge for tailored recommendations on the Tungaloy DNMG150612 AH6225 indexable turning insert; technical advice and order support are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6947217 Manufacturer SKU: TUN6947217 SKU: 6947217-Tungaloy Designation: DNMG150612 AH6225 Core specifications Corner radius: 1.2 mm Cutting angle: 55° Relief angle: 0° Plate thickness: 6.35 mm Size: 15 mm Hole: cylindrical hole Features & applications Material: carbide Coating: PVD (AH6225) Shape: rhombic Chipbreaker: double-sided Application: turning (external and internal) System: ISO turning inserts Typical use: medium cutting conditions, stainless steels FAQ Which materials is this insert suitable for? The DNMG150612 AH6225 insert is designed primarily for stainless steels and performs well in medium machining operations where a balance of edge sharpness and robustness is required. Is the insert single- or double-sided and how many cutting edges are available? This is a double-sided indexable insert; the geometry allows two usable faces per side depending on indexing, effectively increasing the number of available cutting edges. What is the corner radius and how does it affect the machined surface? The corner radius is 1.2 mm; this radius supports good load distribution and contributes to a stable surface finish while allowing adequate strength at the cutting edge for medium cuts. Does the DNMG150612 fit standard ISO holders? Yes, the insert follows ISO turning insert dimensions and the cylindrical hole and tolerance class make it compatible with holders and boring bars that accept the DNMG form. What benefits does the AH6225 PVD coating bring in production? The PVD-coated AH6225 grade enhances wear resistance and reduces built-up edge on stainless steels, leading to more consistent tool life and improved process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant PVD-coated carbide substrate, ISO‑standard geometry and a secure 1.2 mm corner radius for consistent turning results; order original Tungaloy inserts directly via Metav Werkzeuge or contact our consultants for application-specific advice. DNMG150612 AH6225 Tungaloy indexable insert — ISO turning insert for rostfreier Stahl, PVD-coated carbide DNMG150612 AH6225 Tungaloy insert is an ISO‑standard indexable turning insert designed for external and internal turning, offering a 55° rhombic geometry and a stable cutting edge for medium machining conditions ISO rhombic 55° geometry PVD-coated carbide grade AH6225 1.2 mm corner radius for secure edge Double-sided chipbreaker with cylindrical hole Reliable performance for rostfreier Stahl machining The AH6225 grade is designed as a universal option for machining rostfreier Stahl, balancing a sharp cutting edge with the mechanical stability required for variable conditions. The combination of a PVD-coated carbide substrate and a precisely formed cutting edge reduces flank wear and maintains dimensional accuracy over longer tool life. For production planners this means fewer insert changes, reduced downtime and a more predictable process window when moving between batch sizes or mixed-series machining. Geometry that stabilises cutting and improves surface quality The 55° rhombic geometry and 1.2 mm corner radius deliver a favourable contact angle and controlled chip flow, while the integrated chipbreaker reduces the tendency for long, stringy chips in interrupted cuts. A 0° clearance angle and the rhombic platform provide consistent seating and repeatable cutting forces, which lowers vibration and enhances surface finish. These geometric choices translate directly into higher first-pass yield and less rework for turned components. Coating and substrate for repeatable tool life A carbide substrate combined with a PVD coating gives a hard, wear‑resistant surface that tolerates the abrasion and heat typical of medium finishing operations. The coating supports a stable cutting edge and improved oxidation resistance at raised temperatures, contributing to consistent performance across shifts and tool batches. This material and coating pairing supports a predictable replacement interval, which simplifies tool management and cost forecasts in industrial environments. System compatibility and secure clamping for operational ease The insert is manufactured to ISO dimensions so compatibility with holders is determined by form, relief angle, tolerance class, attachment method, size and thickness. The design includes a cylindrical hole for secure fastening and a double-sided layout that provides economical indexability. In practice this means straightforward integration into existing toolholders, simple inventory handling and quick exchange routines, supporting lean production workflows and minimal setup effort. For reliable, versatile turning with Tungaloy's AH6225 grade and ISO DNMG150612 geometry, contact Metav Werkzeuge for availability and application matching — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947266 Manufacturer SKU: TUN6947266 SKU: 6947266-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Material: Carbide Facts Corner radius: 1.2 mm Seat angle: 55° Clearance angle: 0° Thickness: 6.35 mm Insert size: 15 mm Manufacturer article number: 6947266 Special features Coating/grade: AH6225 (PVD-coated) Shape: Rhombic Chipbreaker: Double-sided Hole style: Cylindrical hole With hole: Yes Application: Turning Suitable for: rostfreier Stahl FAQ Which materials is this insert best suited for? The DNMG150612 AH6225 Tungaloy insert is optimised for rostfreier Stahl and performs reliably in medium finishing and mixed‑condition machining. How does the AH6225 grade affect tool life? AH6225 offers a PVD surface on a carbide substrate, which increases wear resistance and helps to maintain a sharp cutting edge for consistent tool life and repeatability. Is the insert compatible with standard ISO holders? Yes, the insert is made to ISO dimensions and fits holders that match the form, relief angle and clamping specifications for DNMG inserts. What benefits does the 1.2 mm corner radius provide? A 1.2 mm corner radius gives a robust edge for secure cutting, reducing the risk of chipping while improving surface finish in production turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade AH6225, a rhombic DNMG150612 geometry with 55° cutting angle, and a robust double-sided chipbreaker to ensure reliable medium-duty turning of rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG150612 AH6225 turning insert, PVD-coated carbide, 55° geometry — Tungaloy The DNMG150612 AH6225 turning insert is an ISO-standard, rhombic indexable insert designed for external and internal turning, primarily suited to rostfreier Stahl applications and medium machining conditions. PVD-coated carbide AH6225 for rostfreier Stahl Rhombic DNMG shape with 55° cutting angle Double-sided chipbreaker for consistent chips Consistent cutting performance for variable conditions The PVD-coated carbide grade AH6225 delivers a balance of sharpness and edge stability, which is advantageous when machining rostfreier Stahl under changing conditions. The coating enhances wear resistance and helps maintain a predictable tool life in medium cutting operations. By selecting a universal grade, process planners benefit from fewer grade changes across mixed production runs, simplifying stock management and supporting steady productivity. Geometry and mounting reduce downtime and improve surface finish The rhombic DNMG150612 geometry with a 55° lead angle and a 1.2 mm corner radius offers a versatile cutting profile for both finishing and light roughing passes. The 6.35 mm plate thickness and cylindrical mounting hole ensure secure clamping in compatible holders, while the double-sided design provides two usable cutting edges per index, improving cost-efficiency per edge. These features together contribute to a more consistent surface quality and fewer tool changes during batch runs. System compatibility and practical selection advice As an ISO-standard insert, compatibility with holders depends on form, clearance, tolerance class, fastening method, size and thickness; the insert is intended for use with appropriate DNMG-compatible turning holders or boring bars. Choosing the correct chipbreaker style and matching the AH6225 grade to workpiece stability will optimise chip control and reduce the risk of built-up edge. For general turning tasks on rostfreier Stahl, the combination of geometry and PVD-coated carbide delivers a pragmatic solution for many workshops and job shops. For reliable turning of rostfreier Stahl with proven Tungaloy quality, contact Metav Werkzeuge for the DNMG150612 AH6225 insert and receive tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data Article number: 6947196 SKU: 6947196-Tungaloy Manufacturer SKU: TUN6947196 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Geometry angle: 55° Corner radius: 1.2 mm Plate thickness: 6.35 mm Insert size: 15 mm Hole: with cylindrical hole Free angle / clearance: 0° Grade: AH6225 Coating: PVD Special features Rhombic DNMG150612 shape Double-sided chipbreaker ISO-standard turning insert Designed for rostfreier Stahl Universal grade for medium machining Sharp yet stable cutting edge Compatible with DNMG holders and boring bars FAQ What materials is this insert designed for? The DNMG150612 AH6225 insert is designed primarily for rostfreier Stahl and performs reliably in medium cutting conditions with that material. How many usable edges does the insert provide? With its double-sided design, the insert offers two usable cutting edges, extending the life span per part and improving cost-efficiency. Which toolholders are compatible with this DNMG insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; holders specified for DNMG150612 geometry and a 6.35 mm thickness are suitable. Does the AH6225 grade require special cutting fluids? While the AH6225 grade is optimised for rostfreier Stahl and offers good stability, cooling and lubrication strategies should be selected according to the workpiece, cutting parameters and machine setup to maximise tool life. Can this insert be used for both external and internal turning? Yes, the DNMG150612 geometry is suitable for both external and internal turning when paired with an appropriate boring bar or external holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, durable cutting edge and universal ISO compatibility for reliable turning results; the PVD-coated AH6225 carbide grade is optimised for stainless steel and consistent medium-duty performance. Order the DNMG150612 AH6225 Tungaloy insert directly via Metav Werkzeuge or consult our technical advisors for pairing with the correct holder and chipbreaker. DNMG150612 AH6225 Tungaloy turning insert — PVD-coated carbide, rhombic 15 mm The DNMG150612 AH6225 Tungaloy insert is an ISO-standard indexable plate for turning, engineered for stable cutting in stainless-steel applications. PVD-coated carbide grade AH6225 Optimised for stainless steel turning Rhombic 15 mm plate, 6.35 mm thick Double-sided chipbreaker, cylindrical hole Consistent cutting performance where it counts The PVD-coated carbide composition and AH6225 grade deliver a combination of sharpness and edge stability that is particularly effective in machining stainless steels under varying conditions. The hard substrate supports a defined cutting edge while the PVD layer increases wear resistance, resulting in consistent results across medium cutting depths. This translates into predictable tool life and a reduced need for frequent index changes, which supports higher process efficiency on production turning centres. Geometry and system compatibility for secure clamping A rhombic plate profile with a 1.2 mm corner radius and 0° clearance angle ensures predictable engagement and a favourable cutting geometry for both external and internal turning. The plate’s double-sided chipbreaker and cylindrical hole permit stable seating and straightforward indexing in ISO holders; compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness. Selecting the correct holder and clamp ensures secure fixation and repeatable positioning, which benefits surface finish and dimensional consistency. Practical benefits for workshop productivity Using an ISO-standard insert in a matched system reduces setup time and simplifies inventory management. The DNMG150612 variant offers a balance between edge sharpness and robustness, which can lead to reduced downtime and fewer rejects when turning challenging alloys. Matching the AH6225 grade and chipbreaker style to the specific stainless-steel grade and machining parameters optimises chip control and lowers the risk of built-up edge. For workshops seeking predictable throughput and reproducible finishes, the insert’s geometry and PVD coating contribute directly to operational reliability. Contact Metav Werkzeuge for a tailored recommendation on the Tungaloy DNMG150612 AH6225 insert or to discuss holder compatibility on +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 6825566 SKU: 6825566-Tungaloy Manufacturer: Tungaloy Facts Corner radius: 1.2 mm Plate size: 15 mm Plate thickness: 6.35 mm Clearance angle: 0° Cutting edge angle: 55° Special features Material: carbide Coating: PVD Grade: AH6225 Shape: rhombic Chipbreaker: double-sided Hole style: cylindrical hole Application: turning Model series: ISO turning indexable inserts FAQ Is this insert suitable for stainless-steel turning? Yes. The DNMG150612 AH6225 Tungaloy insert is specifically formulated for stainless steel machining, combining a sharp cutting edge with PVD wear resistance to handle medium-duty turning tasks. Which holder types are compatible with this insert? Compatibility requires an ISO-standard holder with matching form, tolerance class, fastening and size; the insert seats in holders designed for rhombic DNMG plates and uses the cylindrical hole for secure clamping. What is the corner radius and why does it matter? The corner radius is 1.2 mm; this radius balances edge strength and surface finish, making the plate suitable for general-purpose turning where a compromise between robustness and precision is needed. Is the insert reversible or single-use? The plate is double-sided with a chipbreaker on each side, allowing indexing to the second cutting edge to extend usable life before replacement. What coating and material are used on the insert? The insert is manufactured from carbide and finished with a PVD coating; the grade is AH6225, optimised for performance on stainless steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that balances a sharp cutting edge with stability for mid-range machining; the AH6225 grade is optimised for stainless steels and provides reliable chip control in varied conditions. For straightforward procurement or technical questions, order via Metav Werkzeuge or consult our specialists for holder compatibility and cutting recommendations. DNMG 150612 AH6225 Tungaloy turning insert (ISO DNMG150612, 55°) DNMG150612 AH6225 Tungaloy turning insert crafted for general-purpose turning in demanding materials Versatile PVD-coated carbide grade AH6225 Universal performance for stainless steels Rhombic shape with 55° lead angle 6.35 mm thickness for stable clamping Consistent edge life through a balanced grade The PVD-coated carbide substrate of this insert combines wear resistance with a deliberately sharp yet stable cutting edge, making it suitable for medium cutting depths and varying process conditions. The AH6225 grade is formulated to manage the tough machining behaviour of stainless steels, promoting a consistent chip formation that reduces edge chipping and unplanned tool changes. The coating enhances adhesive wear resistance and heat protection, which translates into longer in-process life and more predictable tool cycles, supporting higher uptime on production lines. ISO form and dimensions that simplify tool setup Built to the ISO DNMG specification, the rhombic geometry with a 55° approach and a plate thickness of 6.35 mm ensures compatibility with common holders when the form, relief angle, tolerance class, fastening method, size and thickness match. The insert’s rhombic outline and cylindrical hole facilitate repeatable clamping and a secure fit, which reduces vibration and improves surface finish on workpieces. Clear, standardised dimensions support quick changeovers and minimise setup errors in mixed production environments. Reliable chip control and economical use in turning Equipped with a double-sided chipbreaker, the insert permits economical use of both cutting edges and supports steady chip evacuation during external and internal turning operations. The corner radius 1.2 mm strengthens the cutting edge for interrupted cuts and provides a robust profile for common turning tasks, striking a balance between edge strength and profile accuracy. As part of a system—insert plus compatible holder, shim and clamping set—the component is designed to deliver repeatable results when the correct chipbreaker and grade are selected for workpiece material and machine stability. For precise application advice on the Tungaloy DNMG150612 AH6225 turning insert, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and cutting parameters Technical data Article number: 6947128 Manufacturer SKU: TUN6947128 Model series: ISO-Drehwendeschneidplatten Grade/coating: AH6225 (PVD) Facts Lead/approach angle: 55° Corner radius: 1.2 mm Insert thickness: 6.35 mm Size: 15 mm Special features PVD-coated carbide Double-sided chipbreaker Rhombic shape (DNMG) With cylindrical hole Suitable for turning, universal for stainless steels FAQ Which materials is this insert suitable for? The AH6225 grade is designed as a universal solution for stainless steels and performs reliably across a broad range of austenitic and other chromium-containing alloys. How does the AH6225 grade help in everyday production? AH6225 combines a PVD coating with a carbide substrate to reduce adhesive wear and maintain a sharp cutting edge, improving consistency and lowering unplanned tool changes in medium machining. Will this insert fit existing DNMG holders? Compatibility depends on holder form, relief angle, tolerance class, fastening and size; the DNMG150612 designation and 6.35 mm thickness match common DNMG holders when those parameters align. What is the advantage of the double-sided chipbreaker? A double-sided chipbreaker offers economical edge usage and reliable chip control, enabling longer usage before indexation and stable machining behaviour. What does the corner radius mean for machining results? The corner radius 1.2 mm increases edge strength for interrupted cuts and contributes to a controlled tool mark on the workpiece while retaining sufficient profile for finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6225 Wendeplatten - Tungaloy
High-performance PVD-coated carbide with a 55° rhombic geometry and a 1.2 mm corner radius ensures reliable turning of stainless steel; the double-sided chipbreaker and ISO DNMG form provide broad holder compatibility and consistent chip control — order via Metav Werkzeuge or contact our consultants for application support. DNMG150612 AH6225 Tungaloy — Indexable Insert for Turning, PVD-coated Carbide A DNMG150612 AH6225 indexable insert engineered for external and internal turning, optimised for stainless steel with a sharp yet stable cutting edge PVD-coated carbide for stainless steel 55° rhombic geometry for versatile turning Double-sided chipbreaker ensures stable chips ISO DNMG150612 — broad holder compatibility Consistent cutting performance for stainless steels The combination of a PVD-coated carbide grade and a geometry tailored to turning yields a reliable balance between edge sharpness and robustness. The AH6225 grade is developed as a universal option for stainless steel, offering good wear resistance under fluctuating cutting conditions and during medium-depth cuts. This means enhanced process stability and fewer interruptions for tool changes, translating into steady productivity for batch and single-piece production alike. The coating reduces built-up edge and improves heat resistance, supporting repeatable surface finish quality. Geometry and mountability that simplify tooling decisions The rhombic DNMG form with a 55° geometry delivers versatility across external and internal turning tasks. A 1.2 mm corner radius provides a compromise between strength and surface finish, while the 6.35 mm thickness and cylindrical hole align with ISO holder standards for straightforward mechanical clamping. Compatibility to a holder is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation ensures the insert fits a wide range of commercially available turning holders, reducing the need for custom adapters and making tooling logistics simpler. Better chip control, repeatability and system integration Equipped with a double-sided chipbreaker, this indexable insert controls chip formation and evacuation, which reduces tool wear and stabilises machining forces. The insert’s two usable faces extend indexable life and lower tooling costs per edge. As part of a complete system — ISO insert, matching outer holder or boring bar, shim/clamping set and replacement screws — the component integrates easily into existing setups. Choosing the correct chipbreaker and grade according to workpiece material and machining stability optimises cycle time and component quality. For tailored advice on using the Tungaloy AH6225 indexable insert and to check compatibility with holders or spare parts, contact Metav Werkzeuge for expert guidance and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947095 SKU: 6947095-Tungaloy Manufacturer SKU: TUN6947095 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Geometry: DNMG150612 Corner radius: 1.2 mm Insert thickness: 6.35 mm Insert size: 15 mm Angle: 55° Relief angle: 0° Special features Material: Carbide Grade/coating: AH6225 (PVD-coated carbide) Chipbreaker: double-sided Shape: rhombic Hole: cylindrical hole (with hole) Application: turning (external and internal) System build: ISO insert, suitable holder or boring bar, shim/clamping set and replacement screws FAQ Which materials is this insert best suited for? The DNMG150612 AH6225 insert by Tungaloy is a universal grade developed for stainless steel and performs well when machining a wide range of stainless steels thanks to its PVD-coated carbide composition. What advantages does the 55° geometry offer in turning operations? A 55° rhombic geometry provides versatility for both external and internal turning, enabling effective approach angles for varied profiles while maintaining edge strength for medium-depth cuts. How can I check if the insert matches my existing holder? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the ISO DNMG designation of this insert simplifies matching to standard holders that accept DNMG-format inserts. What benefit does the double-sided chipbreaker provide? The double-sided chipbreaker improves chip control and evacuation, stabilising cutting forces and enhancing tool life; using both sides extends useful edge count and reduces tooling cost-per-part. Which dimensions are essential to verify before ordering replacements? Confirm geometry (DNMG150612), corner radius (1.2 mm), thickness (6.35 mm), insert size (15 mm), hole style (cylindrical hole) and relief angle (0°) to ensure correct fit and function. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide, a 1.2 mm corner radius and ISO-compatible geometry for efficient medium turning of stainless steels. The insert’s double-sided design and cylindrical hole reduce changeover times while maintaining a stable cutting edge. Order the DNMG150612 AH6225 directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150612 AH6225 Tungaloy ISO turning insert — PVD-coated carbide, 55° DNMG150612 AH6225 is a rhombic ISO indexable insert designed for turning; optimised for medium machining of stainless steels with a stable, sharp cutting edge. PVD-coated carbide for stainless steels ISO rhombic format, 55° cutting angle Double-sided insert with cylindrical hole Increased throughput through focused geometry and coating The combination of a PVD-coated carbide substrate and a controlled edge geometry delivers measurable gains in cycle time and tool life in medium turning operations. The AH6225 grade is formulated for consistent performance on stainless steels, providing a wear-resistant surface that reduces friction and heat at the cutting zone. Thanks to the 1.2 mm radius, surface finish improves while maintaining edge stability, which translates into fewer indexings and lower overall tooling costs. This paragraph highlights how material choice and coating technology impact machining efficiency and part quality. Simple integration into standard holders and predictable clamping Conforming to ISO dimensions, the insert is easy to match with common outside holders or boring bars; compatibility depends on shape, rake angle, tolerance class, fixing method, size and thickness. The rhombic format with 55° cutting angle and cylindrical hole allows secure clamping and quick indexing. With a 6.35 mm thickness, the insert gives robust support in the pocket, and the double-sided design effectively doubles available cutting edges. These attributes ensure predictable set-up times and make tool inventory management more straightforward for production shops. Robust cutting edge for varying conditions and operator confidence The universal AH6225 grade from Tungaloy combines a sharp but stable cutting edge with broad material coverage, making it suitable when workpiece conditions vary. Its PVD layer supports reliable performance under interrupted cutting and moderate feeds, which is particularly beneficial for mixed-batch production. The result is repeatable surface quality and reduced scrap rates, reinforcing process security and operator confidence. This reliability argument supports decisions based on productivity and consistent results rather than experimentation. Contact Metav Werkzeuge for tailored recommendations on the Tungaloy DNMG150612 AH6225 insert and to discuss holder compatibility or volume supply options Technical data Article number: 6825697 Manufacturer SKU: TUN6825697 SKU: 6825697-Tungaloy Facts Shape: rhombic Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 55° Rake angle: 0° Special features Material: carbide Coating/grade: PVD (AH6225) Hole: with hole Hole style: cylindrical hole Indexable: double-sided Application: turning FAQ Which materials is this insert suited for? The DNMG150612 AH6225 Tungaloy turning insert is formulated primarily for stainless steels, offering reliable performance across a broad range of austenitic and ferritic grades. How many cutting edges does the insert provide? This indexable insert is double-sided, so each DNMG150612 AH6225 insert provides two usable cutting edges, which helps to reduce tooling consumption per part. Is the insert compatible with standard ISO holders? Yes — the DNMG150612 format follows ISO dimensions; compatibility depends on holder form, clearance angle, tolerance and clamping system but the ISO standard ensures broad interchangeability. What advantages does the AH6225 grade offer in daily production? The AH6225 PVD-coated grade from Tungaloy offers a balanced combination of wear resistance and edge stability, improving tool life and reducing unexpected tool changes in medium turning tasks. What is the significance of the 1.2 mm corner radius? A 1.2 mm radius provides enhanced edge strength compared with smaller radii, improving surface finish and lowering the risk of edge chipping during interrupted cuts for the DNMG150612 AH6225 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide grade that is optimised for stainless steel and the DNMG150612 rhombic geometry with a 55° cutting angle to achieve consistent medium finishing and stable chip control; order the insert directly via Metav Werkzeuge or consult our specialists for holder matching and process optimisation. DNMG 150612 AH6225 Tungaloy turning insert — PVD-coated carbide, 55° geometry DNMG150612 AH6225 Tungaloy insert for ISO-standard external and internal turning applications, designed for medium machining of stainless steel with a sharp, stable cutting edge PVD-coated carbide grade AH6225 for stainless steel ISO rhombic DNMG150612, 55° cutting geometry Double-sided insert with cylindrical centre hole 1.2 mm corner radius for medium finishing Reliable performance in stainless steel machining The DNMG150612 AH6225 insert is a PVD-coated carbide solution developed for turning stainless steel where a balance between edge sharpness and robustness is required. The AH6225 grade offers a consistently sharp yet stable cutting edge that maintains dimensional accuracy under varying conditions, reducing rework and scrap. The PVD-coated surface improves wear resistance and helps to control built-up edge formation during intermittent cuts. For production environments that demand repeatable surface quality, this insert delivers predictable tool life and less frequent index changes, improving process uptime. Geometry and clamping that support accuracy and access The rhombic DNMG shape with a 55° geometry and a 1.2 mm corner radius provides a compromise between strength and profile access, enabling reliable finishing while maintaining the capability to manoeuvre in tighter workpiece features. The double-sided design increases economy by allowing two usable edges per side, and the cylindrical hole ensures secure, concentric clamping in compatible holders. Plate thickness of 6.35 mm contributes to rigidity in the assembly, lowering vibration and improving surface finish. These geometric choices translate into fewer set-up iterations and consistent component tolerances. Compatibility, system thinking and process benefits Designed as an ISO-standard turning insert, the plate integrates into a system comprising a matched holder, shim, clamp set and replacement screws; compatibility depends on form, relief angle, tolerance class, fixation type, size and thickness. The double-sided chipbreaker is tuned for medium turning operations and supports continuous chip control across different cutting conditions. In practice this means shorter tool-change cycles, stable cutting forces and improved cycle-time predictability. For workshops aiming to standardise tooling for stainless steel, this insert supports scalable production with dependable repeatability. For machining stainless steel with secure edge performance choose the Tungaloy AH6225 grade—contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to confirm holder compatibility and place orders Technical Data Article number: 6947191 SKU: 6947191-Tungaloy Manufacturer SKU: TUN6947191 Model series: ISO turning inserts Material: Carbide Coating: PVD Grade: AH6225 Facts Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 15 mm Relief angle: 0° Cutting angle: 55° Hole: with cylindrical hole Special features Rhombic plate form (DNMG) Double-sided chipbreaker ISO-standard compatible insert Universal grade optimised for stainless steel Intended for external and internal turning System components: insert, holder, shim, clamp set, replacement screws FAQ What materials is this insert suitable for? The DNMG150612 AH6225 Tungaloy insert is primarily formulated for stainless steel and performs well in applications requiring a stable, sharp edge for medium turning. Can the insert be used for internal turning as well as external turning? Yes, the ISO-standard geometry and the rhombic DNMG shape allow the insert to be used for both external and internal turning when paired with a suitable holder. How does the PVD coating affect performance? The PVD coating on the AH6225 grade enhances wear resistance and reduces adhesion of material to the cutting edge, improving tool life and surface quality during medium machining. What clamping features are required for reliable use? Secure clamping with a compatible holder, correct shim and clamp set is essential; the cylindrical hole and standard sizing support concentric mounting and repeatable positioning. Is this insert economical for medium-series production? The double-sided design and the universal AH6225 grade provide good edge utilisation and process stability, which supports economical medium-series production and reduced tooling costs per part. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6225 Wendeplatten - Tungaloy
Combining a PVD‑coated cemented carbide AH6225 with the ISO DNMG150612 geometry yields a sharp yet robust cutting edge optimised for turning stainless steel; the double‑sided chipbreaker and cylindrical hole ensure reliable indexing and easy holder compatibility. Order the DNMG150612 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150612 AH6225 Tungaloy turning insert — PVD‑coated cemented carbide, 55° geometry A DNMG150612 AH6225 Tungaloy turning insert designed for external and internal turning of stainless steel, offering a balance of sharpness and edge stability for medium cutting conditions. PVD‑coated cemented carbide AH6225 ISO DNMG 55° rhombic geometry Double‑sided chipbreaker, cylindrical hole Sharp, stable cutting edge for stainless steels Reliable performance for varied turning tasks The combination of a PVD coating with a cemented carbide substrate in grade AH6225 provides consistent wear resistance and heat protection during turning of stainless steel. This grade is formulated to deliver a sharp cutting edge while maintaining edge stability under changing conditions, which translates into more predictable tool life and fewer interruptions for insert changes. The rhombic geometry contributes to good access in external and internal operations without sacrificing strength. Seamless integration into ISO turning systems Built to the ISO DNMG profile, the insert matches common holder geometries so compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness. The cylindrical hole and double‑sided design allow economical indexing in suitable external holders or boring bars, while the 55° lead angle supports versatile approach angles. System components such as a matching outer holder, shim/clamping set and replacement screws complete the assembly for a secure fit and repeatable positioning. Improved productivity through chip control and geometry A double‑sided chipbreaker coupled with a corner radius of 1.2 mm helps to manage chip formation and evacuation, reducing the risk of entanglement and enabling steady material removal. The 55° geometry distributes cutting forces favourably, supporting stable cutting at moderate depths of cut. Together, the AH6225 grade and the insert geometry aim to enhance process reliability and reduce downtime, making the tool a practical choice for shops seeking consistent results on stainless steel workpieces. Practical guidance for selection and use For best outcomes, select a chipbreaker and grade that match the workpiece material, machining setup and required surface finish; this insert is intended for medium machining of stainless steel where a balance of sharpness and durability is needed. When rigid clamping and stable toolholding are available, the insert’s features deliver repeatable performance in both external and internal turning operations. If there is uncertainty about matching the insert to a specific holder or application, Metav Werkzeuge’s technical advisers can provide tailored recommendations. Contact Metav Werkzeuge today for expert advice on the Tungaloy DNMG150612 AH6225 insert and to arrange prompt supply or application guidance through Metav Werkzeuge Technical data Article number: 6947158 SKU: 6947158‑Tungaloy Manufacturer SKU: TUN6947158 Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: cemented carbide Coating/grade: PVD, AH6225 Application: Turning Geometry: DNMG150612 Shape: rhombic Hole: cylindrical Facts Insert angle: 55° Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 15 mm Relief/free angle: 0° Special features Double‑sided chipbreaker Sharp yet stable cutting edge Universal grade for stainless steel machining Compatible with standard ISO holders (form, free angle, tolerance, fastening, size, thickness) System components: matching outer holder, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The DNMG150612 AH6225 insert is engineered primarily for stainless steel machining; the AH6225 grade and PVD coating support medium cutting conditions in a range of corrosion‑resistant steels. Is the insert indexable and reversible? Yes, the insert is double‑sided with a cylindrical hole, permitting indexing and economical use of both cutting edges in compatible holders. Which holder features ensure correct compatibility? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and plate thickness; the DNMG150612 geometry matches common ISO‑standard holders when these criteria align. How does the chipbreaker affect machining? The double‑sided chipbreaker helps control chip formation and evacuation, improving process stability and reducing the likelihood of chip interference during continuous turning operations. What advantages does the AH6225 grade offer? AH6225 provides a PVD‑coated carbide combination that balances a sharp cutting edge with edge stability, making it suitable for varied stainless steel turning tasks. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150612 AH6225 Wendeplatten - Tungaloy
The combination of PVD-coated cemented carbide and a stable 55° rhombic geometry delivers reliable performance in medium turning operations of stainless steels. Benefit from efficient chip control and a robust cutting edge for consistent surface quality and predictable tool life. Order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. DNMG150612 AH6225 turning insert — ISO-compliant rhombic insert for medium turning by Tungaloy DNMG150612 AH6225 is an ISO-standard turning insert engineered for general turning applications, optimised for stainless steels and variable machining conditions ISO rhombic 55° geometry, ISO-compliant PVD-coated cemented carbide grade AH6225 1.2 mm corner radius for stable engagement Double-sided chipbreaker, with cylindrical hole Consistent cutting performance for stainless steels The PVD-coated cemented carbide grade offers a balance between edge sharpness and wear resistance, designed specifically for machining stainless steels under varying conditions. This combination reduces built-up edge formation and improves surface finish during medium cuts. The ISO-standard geometry ensures predictable cutting behaviour and straightforward comparison with other inserts, supporting process planning and tool selection in job shops and production environments. Stable edge life and machining reliability A comparatively sharp, yet durable cutting edge in the AH6225 grade provides consistent results over repeated operations, translating into fewer interruptions and steadier part quality. The double-sided chipbreaker extends usable edges and supports reliable chip formation, while the robust coating mitigates flank wear. These factors contribute to lower tooling costs per component and help maintain cycle times in batch production or mixed-series turning. Secure clamping and straightforward holder compatibility The rhombic 55° geometry, 6.35 mm thickness and cylindrical hole permit secure mounting in compatible external holders and boring bars. Compatibility depends on form, clearance angle, tolerance class, clamping and size; matching these criteria ensures correct seat and clamping force. The 1.2 mm corner radius smooths engagement at entry and exit, reducing vibration and aiding dimensional stability on long overhangs or less rigid setups. Productivity advantages and application guidance Using this ISO insert supports a predictable machining window, with benefits in surface finish and reproducibility for medium turning tasks. The design promotes efficient chip evacuation and steady tool life, which together help to reduce changeover frequency and increase effective machine uptime. Application advice and cutting data are available for integration into existing tool systems, and Metav Werkzeuge can provide support for optimising feeds, speeds and holder selection. For reliable performance with Tungaloy inserts and tailored machining parameters, contact Metav Werkzeuge for expert application advice and supply — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6825728-Tungaloy Manufacturer SKU: TUN6825728 Manufacturer article number: 6825728 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Name: DNMG150612 AH6225 Tungaloy-Wendeplatte Facts Corner radius: 1.2 mm Thickness: 6.35 mm Inscribed circle: 15 mm Clearance angle: 0° Geometry angle: 55° Special features PVD-coated cemented carbide (AH6225) Double-sided chipbreaker ISO-standard rhombic insert Cylindrical hole for secure clamping Suitable for turning applications Compatible with external holders and boring bars FAQ What materials is this insert designed for? The DNMG150612 AH6225 Tungaloy turning insert is formulated primarily for stainless steels, offering improved resistance to built-up edge and consistent surface quality in variable machining conditions. How does the AH6225 grade affect tool life and finish? The AH6225 PVD coating and carbide substrate provide a balance between edge sharpness and wear resistance, so the DNMG150612 insert achieves predictable tool life and reliable surface finish during medium turning operations. Is the insert reversible or indexable? Yes, the insert is double-sided with a chipbreaker on both cutting faces, allowing multiple indexing positions before disposal and improving cost-efficiency per edge. What should be checked for holder compatibility? Holder compatibility depends on the insert form, clearance angle, tolerance class, clamping method, size and thickness; ensure the holder matches the DNMG150612 geometry and the cylindrical hole specification for correct seating. Does the cylindrical hole affect mounting options? The cylindrical hole provides a secure central reference and is compatible with a range of clamping systems in ISO holders; correct clamping ensures repeatable positioning and stable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6225 Wendeplatten - Tungaloy
Take advantage of precise ISO compatibility, a PVD-coated carbide grade tuned for rostfreien Stahl and a stable, sharp cutting edge for consistent medium-duty turning; order the insert directly via Metav Werkzeuge or consult the team for application advice. DNMG 150612 AH6225 — Turning indexable insert, PVD-coated carbide — Tungaloy A DNMG 150612 AH6225 indexable insert designed for general turning applications, offering a balanced combination of a sharp, stable cutting edge and universal performance for rostfreien Stahl. ISO DNMG150612, rhombic 55° geometry PVD-coated carbide AH6225 for rostfreien Stahl Double-sided chipbreaker with cylindrical hole Corner radius 1.2 mm, plate thickness 6.35 mm Consistent cutting performance for medium-duty turning The insert is a PVD-coated carbide solution that delivers a dependable balance between edge sharpness and wear resistance, optimised for medium machining conditions. As an indexable insert in the ISO series, the geometry and coating combine to reduce downtime and improve tool life, which supports efficient cycle times and predictable process costs. The stable cutting edge reduces the need for frequent regrinding and helps to maintain component tolerances across production batches. Secure fit and predictable chip control in turning setups Compatibility with the holder is determined by geometry, clearance, tolerance class, fastening and plate thickness; the ISO DNMG150612 form and the 55° rhombic angle ensure a secure seat in most standard turning holders. The double-sided chipbreaker and the insert’s design promote controlled chip formation when machining rostfreien Stahl, lowering the risk of built-up edge and improving surface finish. The presence of a cylindrical hole supports positive clamping and quick indexing for uninterrupted operations. Robust edge life and straightforward handling With a corner radius of 1.2 mm and a plate thickness of 6.35 mm, the insert provides a compromise between strength and detail for external and internal turning tasks. The AH6225 grade is developed to offer a sharp yet resilient cutting edge under variable conditions, helping to sustain tool performance across mixed batches and fluctuating feeds. For specific process windows, select the chipbreaker and insert grade to match material, machining type and machine stability. If additional technical data are required, the Metav Werkzeuge team is available to advise on tool selection and setup; contact via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Contact Metav Werkzeuge today to specify the right holder pairing for this Tungaloy DNMG150612 AH6225 insert or request tailored machining recommendations Technical data Article number: 6890599 SKU: 6890599-Tungaloy Manufacturer SKU: TUN6890599 Manufacturer item number: 6890599 Numbers / Core technical data Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 15 mm Wedge/angle: 55° Designs / Special features ISO designation: DNMG150612 Carbide material: PVD-coated carbide (AH6225) Plate form: rhombic, with cylindrical hole Chipbreaker: double-sided Application: Turning (external and internal) Suited material: rostfreien Stahl Free clearance angle: 0° FAQ What machining tasks is this insert best suited for? The DNMG150612 AH6225 insert is intended for external and internal turning, providing a balanced solution for medium-duty operations and especially suited for rostfreien Stahl. How does the AH6225 grade affect tool life and finish? The AH6225 PVD-coated carbide grade on the DNMG150612 supports a sharp, stable cutting edge that improves surface finish and extends usable life under varying cutting conditions. Is the insert reversible or indexable? Yes, the insert is double-sided and indexable; both faces can be used until the edge is worn, enabling economical use of the plate. Which holder features are required for correct compatibility? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; the DNMG150612 geometry and cylindrical hole are designed for standard ISO-compatible turning holders. Can this insert handle interrupted cuts or variable stability conditions? The combination of a robust corner radius and the AH6225 grade provides reasonable resistance to shock and edge chipping in varying conditions, though machining strategy should match the workpiece rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6225 Wendeplatten - Tungaloy
Take advantage of the blend of cost-effective durability, precise geometry and easy integration for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. DNMG 150612 AH6225 – ISO indexable insert for turning, 55° – Tungaloy A DNMG 150612 AH6225 indexable turning insert designed for ISO-compatible holders, offering a universal PVD-coated carbide grade for machining stainless steels in external and internal turning operations. PVD-coated carbide grade AH6225 Optimised for stainless steels Sharp yet stable cutting edge Rhombic DNMG geometry, 55° Consistent cutting performance for stainless-steel turning The PVD-coated carbide grade AH6225 delivers a balance between a sharp cutting edge and edge stability, which is essential when machining stainless steels under variable conditions. The coating reduces flank wear and improves resistance to built-up edge, resulting in longer tool life and more predictable cycle times. Specified as a universal grade, the insert is suited for medium machining where a reliable compromise between surface finish and tool life is required. For practical setups, selecting the correct chipbreaker and machining parameters will directly affect productivity and component quality. Straightforward holder compatibility and robust geometry The rhombic DNMG form with a cutting angle of 55° and a corner radius of 1.2 mm provides a familiar geometry for many ISO turning holders. Compatibility with a selected holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the insert’s 6.35 mm plate thickness and cylindrical hole permit secure clamping and bidirectional use. The double-sided design extends usable life per indexation and supports efficient stocking. These standard dimensions simplify integration into existing tool systems while maintaining repeatable mounting and concentricity for reliable machining results. Process efficiency, surface quality and predictable outputs Using a universal, PVD-coated carbide insert reduces the number of grades required in the tool cabinet and helps to standardise process windows. The AH6225 grade supports stable chip formation and consistent cutting forces, which contributes to improved surface finish and lower rework rates. For production environments, this leads to fewer machine interruptions and clearer process planning: less variability in tool life, fewer unscheduled tool changes, and a smoother production flow. The indexable design allows quick replacement, supporting lean workflows and minimising downtime. Selection advice and application support Choose the chipbreaker and grade to match workpiece material, depth of cut and machine stability; for heavy interrupted cuts a larger corner radius and more robust setup are advised, while finishing passes benefit from smaller radii and finer feeds. If uncertain whether this insert fits a specific application, Metav Werkzeuge provides technical advice and additional data on machinability and recommended parameters. Practical considerations such as holder rigidity, spindle power and coolant strategy will determine the final performance more than the insert alone, so pair the ISO-standard insert with a matched toolholder and clamping set for best results. Contact Metav Werkzeuge for tailored application advice and availability for the DNMG150612 AH6225 indexable insert (SKU TUN6947240); email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947240 Manufacturer SKU: TUN6947240 SKU: 6947240-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150612 AH6225 Core specifications Corner radius: 1.2 mm Clearance angle: 0° Insert thickness: 6.35 mm Insert size: 15 mm Cutting angle: 55° Special features Material: carbide Coating: PVD Chipbreaker: double-sided Hole: cylindrical (with hole) Geometry: rhombic DNMG, double-sided use Application: turning; optimised for stainless steels FAQ Which operations is this insert intended for? The DNMG150612 AH6225 indexable insert from Tungaloy is intended primarily for external and internal turning operations, offering a universal solution for medium machining of stainless steels. How is compatibility with holders ensured? Compatibility is achieved by matching holder form, clearance angle, tolerance class, fastening, size and thickness; the DNMG geometry and 6.35 mm thickness require an ISO-compatible turning holder with corresponding seat and clamping. Is the insert reversible or single-sided? This insert is double-sided with a cylindrical hole and can be indexed to use both cutting edges, extending tool life; see SKU TUN6947240 for ordering and inventory reference. What materials is the AH6225 grade best suited to machine? The AH6225 PVD-coated carbide grade is optimised for stainless steels; selection of chipbreaker and cutting data should be adjusted to component stability and finish requirements. How does the corner radius affect machining results? A 1.2 mm corner radius offers a compromise between edge strength and surface finish—larger radii improve robustness in roughing, smaller radii favour finer finishes and lower cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6235 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide grade AH6235, the 55° rhombic geometry and the secure cylindrical-hole mounting to ensure stable performance in external and internal turning — particularly for interrupted cuts and applications with higher notch risk. Order the DNMG150612 AH6235 Tungaloy turning insert directly via Metav Werkzeuge or consult our specialists for tailored recommendations. DNMG150612 AH6235 Tungaloy turning insert — ISO rhombic insert for turning, PVD-coated carbide, 55° A DNMG150612 AH6235 indexable insert designed for reliable external and internal turning, optimised for rostfreier Stahl and interrupted cutting conditions. PVD-coated carbide grade AH6235 55° rhombic geometry for versatile turning 1.2 mm nose radius for robustness Double-sided chipbreaker, cylindrical hole Stable cutting in demanding turning operations The insert’s PVD-coated carbide composition and the AH6235 grade deliver improved resistance to notch wear and chipping during interrupted cuts. The 55° rhombic geometry combines a favourable cutting edge inclination with rigidity, reducing vibration and improving tool life in heavy or unstable setups. For machining rostfreier Stahl, this tougher grade supports safer chip formation and fewer unplanned stoppages, which in turn raises overall productivity and process reliability. Secure clamping and ISO compatibility for simple tool handling As an ISO DNMG150612 insert, the plate fits standard ISO holders when form, relief angle, tolerance class, fixation method, size and thickness match. The cylindrical hole and double-sided indexable design allow quick indexing and positive axial location in the cutter body, which reduces setup time and ensures repeatable positioning. The 0° relief angle and 6.35 mm plate thickness contribute to stable clamping under cutting loads, lowering the risk of edge breakouts and improving dimensional consistency. Economical machining through longer life and consistent quality By pairing a tougher carbide with a PVD coating, the insert balances wear resistance and toughness to extend service life in demanding applications. The 1.2 mm nose radius and robust chip control minimise edge failure while maintaining a controlled surface finish, reducing the frequency of insert changes and the associated downtime. This combination offers a clear cost-in-use advantage where reliable, repeatable performance is required over many shifts. Practical setup advice and recommended use cases Select the double-sided chipbreaker variant to match the workpiece material and the depth of cut; the chipbreaker geometry helps maintain short, controllable chips in turning operations. The plate is suitable for both external and internal turning; for interrupted or unstable cuts, favour a rigid holder and conservative entry conditions. If in doubt about optimal feeds and speeds for specific rostfreier Stahl alloys, the indexable plate’s AH6235 grade and PVD finish provide a resilient starting point that can be gradually optimised to the machine and workpiece. Contact Metav Werkzeuge for expert advice on the Tungaloy DNMG150612 AH6235 turning insert, availability and application-specific cutting data — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6881948 SKU: 6881948-Tungaloy Manufacturer SKU: TUN6881948 Model series: ISO turning inserts Core data Designation: DNMG150612 Grade: AH6235 Material: carbide Geometry: rhombic, 55° Plate size: 15 mm Thickness: 6.35 mm Nose radius: 1.2 mm Relief angle: 0° Special features PVD-coated carbide, grade AH6235 Double-sided chipbreaker Cylindrical hole for positive location ISO indexable plate for external and internal turning Suited to interrupted cuts and higher notch risk Compatible with standard ISO DNMG holders FAQ What materials is this insert best suited for? The DNMG150612 AH6235 insert is formulated for rostfreier Stahl and similar alloys; the tougher PVD-coated carbide resists notch wear in interrupted and abrasive turning tasks. How is the insert positioned and secured in the holder? Location is achieved via the cylindrical hole combined with the plate form and tolerance class; the indexable design allows double-sided use and straightforward indexing. Can this insert be used for both external and internal turning? Yes, the ISO rhombic geometry and the 55° cutting angle make the plate suitable for both external and internal turning applications when the matching holder is used. What benefits does the AH6235 grade provide compared with standard grades? AH6235 offers a balance of toughness and wear resistance that reduces chipping and improves reliability during interrupted cuts and when machining rostfreier Stahl. Is there guidance for feeds and speeds when starting with this insert? General starting parameters depend on machine rigidity and workpiece alloy; use conservative entry values initially and optimise. The AH6235 grade and robust geometry provide a forgiving baseline for tuning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6235 Wendeplatten - Tungaloy
Take advantage of a robust combination of PVD-coated carbide and a 55° rhombic geometry for consistent chip control and extended tool life; the result is efficient turning of rostfreier Stahl with reduced risk of edge breakouts. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150612 AH6235 Tungaloy indexable insert for turning — PVD-coated carbide, 55° rhombic geometry DNMG150612 AH6235 is an ISO-compliant indexable insert designed for turning operations, optimised for rostfreier Stahl and interrupted cuts with a focus on reliable chip control and repeatable performance PVD-coated carbide grade AH6235 Designed for rostfreier Stahl and interrupted cuts Rhombic DNMG 55° geometry, 1.2 mm corner radius Double-sided chipbreaker, cylindrical hole fitting Increased cutting reliability for rostfreier Stahl turning The PVD-coated carbide composition of this insert provides a tougher edge geometry that withstands the demands of rostfreier Stahl machining and intermittent cutting conditions. The AH6235 grade is specifically formulated to reduce chipping and maintain edge integrity under higher breakout risk. As a result, the machining process benefits from more predictable wear patterns and fewer unscheduled tool changes, which translates directly into improved throughput and lower secondary operations. The coating also contributes to a controlled friction profile that supports steady cutting parameters and better surface integrity on finished components. Geometry engineered for secure clamping and consistent results A 55° rhombic form paired with a 1.2 mm corner radius and a 0° clearance angle delivers a dependable balance between edge strength and cutting penetration. The rhombic geometry is widely compatible with ISO-standard holders when matched for form, clearance, tolerance class, fastening and size, meaning set-up time is reduced when replacing inserts. The double-sided chipbreaker supports predictable chip formation on both usable edges, while the cylindrical hole ensures stable seating and torque transmission in the pocket. These geometric choices help maintain concentricity and reduce vibration for repeatable turning quality. Practical benefits for workshop productivity and process stability Built as part of an ISO insert series, this component supports streamlined inventory management and straightforward replacement cycles. The 6.35 mm thickness increases stiffness in the clamping arrangement, reducing edge deflection during heavy cuts and enabling higher material removal rates where the machine and workholding permit. For both external and internal turning, the combination of material grade and geometry reduces scrap rates and rework, improving overall machining economics. The standardised format simplifies toolroom logistics and ensures compatibility with a wide range of proprietary and generic holders. Clear technical design for everyday machining tasks The insert is intended for turning and is configured to address typical workshop challenges: interrupted surfaces, difficult-to-machine rostfreier Stahl grades and applications where stable chip control is paramount. The PVD layer enhances the hardness and thermal resistance of the cutting edge without sacrificing toughness, making the component suitable for operations that alternate between finishing and light roughing. As an ISO-sized indexable solution, it offers both performance predictability and ease of integration into existing tool systems. Contact Metav Werkzeuge for stock availability and application advice for the Tungaloy AH6235 insert: info@metav-werkzeuge.com | +49 2822 7131930 — recommended for demanding rostfreier Stahl turning tasks Technical data Article number: 6886659 SKU: 6886659-Tungaloy Manufacturer SKU: TUN6886659 Model series: ISO-Drehwendeschneidplatten Name: DNMG150612 AH6235 Tungaloy indexable insert Core specifications Angle: 55° Corner radius: 1.2 mm Clearance angle: 0° Thickness: 6.35 mm Plate size: 15 mm Features and materials Material: carbide Coating: PVD Application: Turning Chipbreaker: double-sided Plate shape: rhombic Hole style: cylindrical hole Designed for: rostfreier Stahl and interrupted cuts FAQ Which materials is this insert suitable for? The DNMG150612 AH6235 Tungaloy indexable insert (SKU 6886659-Tungaloy) is formulated for rostfreier Stahl and applications with interrupted cuts; the AH6235 grade emphasises toughness to reduce edge breakouts. How is compatibility with toolholders determined? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG150612 designation follows ISO conventions, simplifying selection of a matching holder. What benefits does the PVD coating provide? The PVD-coated carbide construction of this insert offers improved thermal resistance and edge hardness while maintaining toughness, which supports longer tool life and more consistent surface quality. Is the insert reversible or indexable on both sides? The insert features a double-sided chipbreaker and a cylindrical hole that permit secure seating and rotation to utilise alternate cutting edges as the application requires. What are the geometric details to consider for set-up? Key dimensions to note are the 55° rhombic geometry, a 1.2 mm corner radius and a 0° clearance angle, which together influence cutting engagement and clamping strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide resilience and a 55° rhombic geometry for dependable turning performance; the tough AH6235 grade reduces breakout risk in interrupted cuts and offers consistent tool life. Order the insert directly via Metav Werkzeuge or ask the consultants for matching holders and clamping kits. DNMG 150612 AH6235 turning insert (ISO) by Tungaloy — 55° rhombic, PVD-coated carbide The DNMG150612 AH6235 is an ISO-standard indexable turning insert designed for external and internal turning operations, offering a robust grade for applications with increased breakout risk. PVD-coated carbide for rostfreier Stahl applications 55° rhombic geometry for versatile turning Double-sided chipbreaker for interrupted cuts Tough AH6235 grade for increased edge stability Consistent machining of rostfreier Stahl and other challenging alloys The PVD-coated carbide composition and the AH6235 grade are engineered for demanding environments, particularly when machining rostfreier Stahl and other work-hardened alloys. The tougher substrate of this grade reduces susceptibility to chipping under fluctuating cutting conditions, extending effective tool life. This results in fewer insert changes and a more predictable production rhythm, which contributes directly to lower process costs and improved line efficiency. Secure seating and dimensional stability for reproducible results Manufactured to ISO dimensions, the rhombic form and the cylindrical hole ensure exact positioning and secure clamping in compatibleholders. With a 6.35 mm thickness and a 1.2 mm radius, the geometry provides a stable cutting edge while the 55° approach angle supports a balance between cutting force and surface finish. Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness, so pairing the insert with the correct external holder and clamping set is essential for repeatable accuracy. Improved chip control and resistance in interrupted cuts The double-sided chipbreaker is optimised for interrupted cuts and applications with elevated breakout risk, guiding chips away from the workpiece and reducing heat concentration at the cutting edge. The PVD-coated surface enhances wear resistance and adhesion control, which is beneficial during medium to high cutting speeds. For shops aiming to maintain high throughput, this combination reduces downtime caused by edge failure and supports consistent part quality. System considerations and selection guidance for productive turning An efficient tooling system includes the ISO insert, a matched external holder or boring bar, a support/lock set and spare clamping screws. Selecting the correct chipbreaker and grade according to workpiece material and machining stability will yield the best results; for example, the AH6235 grade suits interrupted cutting in rostfreier Stahl, while different breakers or grades might be preferable for heavy roughing or finishing runs. Clear documentation of holder type and tolerance class simplifies reordering and reduces set-up time on repeat jobs. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts and complementary holders; phone +49 2822 7131930 or email info@metav-werkzeuge.com for assistance with selection and availability Technical data Article number: 6892187 Manufacturer SKU: TUN6892187 SKU: 6892187-Tungaloy Article name: DNMG150612 AH6235 Tungaloy insert Series: ISO-Drehwendeschneidplatten Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Approach angle: 55° Relief angle: 0° Special features Material: Hartmetall (carbide) Coating: PVD-coated Plate shape: rhombic Hole: with hole; cylindrical hole Chipbreaker: double-sided Application: external and internal turning; interrupted cuts ISO compatibility: ISO indexable turning inserts FAQ What workpiece materials is this insert best suited for? The DNMG150612 AH6235 insert is optimised for rostfreier Stahl and other alloys that require a tougher grade to resist edge breakout; the PVD coating further improves wear resistance. How does the 55° geometry affect cutting performance? A 55° rhombic approach provides a balance between cutting forces and surface finish, making the insert versatile for both external and internal turning operations. Is the insert reversible and how is it clamped? This is a double-sided indexable insert with a cylindrical hole for secure clamping; the design supports two cutting edges per indexation to extend usable life. Which components are needed to build a complete tool system? A matching ISO external holder or boring bar, the appropriate support/klemmsatz and replacement clamping screws are required to assemble a functional system around the insert. Can the AH6235 grade handle interrupted cuts? Yes, the AH6235 grade is formulated to withstand interrupted cuts and applications with higher breakout risk, delivering stable edge behaviour under variable loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH6235 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH6235 grade and a robust rhombic 55° geometry to maintain process stability and extend tool life in turning applications; the insert is especially effective for interrupted cuts and rostfreier Stahl. Order the insert directly via Metav Werkzeuge or ask our consultants for tailored cutting data. DNMG 150612 AH6235 ISO turning insert, PVD-coated carbide, with cylindrical hole — Tungaloy A DNMG150612 AH6235 ISO turning insert engineered for reliable external and internal turning, offering high fracture resistance for interrupted cuts and demanding rostfreie Stahl applications *PVD-coated carbide grade AH6235 *Optimised for rostfreier Stahl and interrupted cuts *Rhombic insert with 55° cutting angle *Double-sided chipbreaker with cylindrical hole Consistent machining of rostfreier Stahl and difficult alloys The AH6235 grade is a PVD-coated carbide designed to combine toughness with wear resistance, which helps when machining rostfreier Stahl or components prone to built-up edge. The tougher substrate reduces the risk of chipping during interruptions, while the coating supports thermal stability at elevated cutting temperatures. This balance results in fewer insert changes and more reliable cycle times, making the geometry a practical choice where repeatability and uptime matter. Reduced setup time through ISO compatibility and secure clamping Adherence to ISO form and dimensions ensures predictable fitment in standard toolholders; compatibility depends on element shape, clearance angle, tolerance class, fastening and thickness. The rhombic outline with a cylindrical hole permits positive clamping and straightforward indexation, so insert changes are fast and secure. Clear specification of holder type and clamping hardware avoids trial-and-error, supporting smooth changeovers and reduced non-productive time. Geometry and chip control that raise productivity The 55° cutting angle and 1.2 mm corner radius produce a compromise between strength and surface finish: robust enough for interrupted cuts yet suitable for achieving acceptable roughness on external and internal profiles. The double-sided chipbreaker improves fragmentation and evacuation, lowering the risk of built-up edge and stabilising cutting forces. Together these design choices enable higher average metal removal rates while maintaining dimensional control across batches. Practical integration and recommended system setup For a complete machining system, pair the insert with a compatible external holder or boring bar, plus a matching shim/clamp set and spare fasteners. The insert is part of the ISO turning insert series and performs best when chipbreaker style and grade are selected to match workpiece stability and feed rate. When facing high breakout risk or poor part support, the AH6235 grade and its chip control features offer a safer margin against premature tool failure, translating into longer tool life and fewer interruptions. For application advice, cutting-data recommendations or to order Tungaloy DNMG150612 AH6235 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — experts are available to recommend holders, parameters and compatible clamping kits Technical data Article number: 6886140 Manufacturer SKU: TUN6886140 SKU: 6886140-Tungaloy Type designation: DNMG150612 AH6235 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.2 mm Cutting angle: 55° Plate thickness: 6.35 mm Plate size: 15 mm Geometry: rhombic, cylindrical hole Special features Material: carbide Grade/coating: AH6235 (PVD-coated) Chipbreaker: double-sided Hole style: cylindrical Application: turning (external and internal) Typical system: ISO insert + external holder or boring bar + shim/clamp set + spare screws FAQ What materials is this insert suitable for? The DNMG150612 AH6235 insert from Tungaloy (SKU TUN6886140) is optimised for rostfreier Stahl and alloys where interrupted cuts or breakout risk require a tougher grade. Is the geometry suitable for internal turning and profiling? Yes, the rhombic form with a 55° cutting angle and a 1.2 mm corner radius provides a good balance of strength and access for internal turning and light profiling tasks. How does the chipbreaker affect performance? The double-sided chipbreaker on this Tungaloy insert improves fragmentation and evacuation, reducing built-up edge and helping to maintain stable cutting forces during continuous production. How should the insert be clamped in the holder? Secure clamping via the cylindrical hole and correct shim/clamp selection is essential; compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness. Which system components are typically required for use? A standard setup includes the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws to ensure safe and repeatable mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant PVD coating, ISO compatibility and a 1.2 mm corner radius for reliable, repeatable turning results; ideal where stable setups and hard or heat-resistant alloys demand consistent edge performance. Order the DNMG150612 AH8005 turning inserts directly via (Metav Werkzeuge) or ask our consultants if needed. DNMG 150612 AH8005 turning insert – PVD-coated carbide, 1.2 mm corner radius (Tungaloy) A DNMG150612 AH8005 turning insert crafted for ISO-standard turning applications, optimised for stable machining of heat-resistant alloys and other hard materials. PVD-coated carbide grade AH8005 ISO DNMG 150612 form, 55° cutting angle 1.2 mm corner radius for robust edge Double-sided chipbreaker for consistent chips Cylindrical central hole for secure clamping Reliable performance for demanding materials The PVD-coated carbide grade AH8005 delivers enhanced wear resistance and thermal stability, making it well suited to machining heat-resistant alloys and harder steels where cutting temperatures and abrasive wear are higher. The PVD layer reduces friction at the cutting edge and prolongs tool life under steady cutting conditions, which translates into fewer changeovers and improved production uptime. For engineers seeking predictable process windows, this composition supports consistent cutting forces and repeatable component quality. ISO compatibility and secure clamping for efficient tool changeovers Designed to the ISO DNMG 150612 form, the insert features a cylindrical central hole and a rhombic 55° geometry that match widely used external and internal holders. The double-sided chipbreaker supplies two usable cutting edges per side, increasing edge economy and reducing tooling cost per part. The 1.2 mm corner radius balances edge strength and surface integrity: larger radii improve insert robustness and vibration resistance, while still enabling acceptable surface finish when used in a stable setup. Correct holder selection and matching tolerance class ensure optimal seating and clamping security. Practical application guidance for turning operations This insert is tailored for turning where rigidity and process stability are priorities. The grade excels in steady, medium-to-heavy cuts on heat-resistant alloys and other hard materials; choose appropriate cutting parameters and a holder that maintains the specified free angle and form. The double-sided design supports quick index changes, and the 6.35 mm plate thickness contributes to edge stability under load. For finishing passes a smaller depth of cut or modified feed helps achieve finer surface quality while the geometry maintains reliable chip control during semi-finish and roughing passes. For process-critical turning of heat-resistant alloys, contact Metav Werkzeuge to confirm the optimal holder and setup for the DNMG150612 AH8005 Tungaloy insert; reach out via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations Technical Data Article number: 6936105 Manufacturer SKU: TUN6936105 Model series: ISO turning inserts Material: PVD-coated cemented carbide Designation: DNMG150612 AH8005 Type: Turning insert (ISO) Core technical data Inscribed circle: 15 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 55° Free angle (rake): 0° Manufacturer article number: 6936105 Special features Rhombic plate form Cylindrical central hole Double-sided chipbreaker Suitable for heat-resistant alloys and hard materials Intended application: turning Compatible with ISO-standard DNMG holders FAQ Which materials is this insert suitable for? The DNMG150612 AH8005 insert from Tungaloy is designed for heat-resistant alloys and other hard materials; its PVD-coated carbide composition supports wear resistance in demanding cutting conditions. Is the insert indexable and how many cutting edges are available? Yes, the insert is double-sided with a chipbreaker on each side, providing multiple usable edges to improve edge economy for the Tungaloy DNMG150612 AH8005. What holder features are required for correct mounting? Holders must match the ISO DNMG 150612 form, the 55° geometry, plate thickness and the cylindrical central hole to ensure secure clamping and correct seating of the Tungaloy insert (SKU TUN6936105). How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength and resistance to chipping, offering better stability during heavier cuts while still permitting acceptable surface finish with appropriate feeds and depths of cut. Can this insert be used for internal and external turning? Yes, the geometry and ISO form allow use in both external and internal turning applications provided the chosen holder and setup maintain the specified clearance and rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH8005 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH8005 grade and the proven DNMG 55° rhombic geometry for stable, high‑productivity turning of heat‑resistant alloys and hard materials. Order the DNMG150612 AH8005 Tungaloy insert directly via Metav Werkzeuge or ask the consultants for application support. DNMG 150612 AH8005 Turning Insert (ISO DNMG) — Tungaloy A DNMG150612 AH8005 indexable turning insert engineered for stable machining of heat‑resistant alloys and hard materials PVD-coated carbide grade AH8005 ISO rhombic DNMG geometry 55° Double-sided chipbreaker design 1.2 mm corner radius, 6.35 mm thickness Increased process stability for heat‑resistant and hard materials The PVD‑coated cemented carbide grade AH8005 is designed to deliver consistent wear resistance in elevated temperatures and under sustained cutting loads. The PVD coating reduces flank wear and extends usable tool life while preserving cutting edge integrity, which leads to fewer insert changes and reduced machine downtime. For precision turning tasks, the robust substrate and coating combination supports longer uninterrupted production runs and a more predictable maintenance schedule. Geometry and dimensions that ensure repeatable setup The ISO rhombic DNMG form with an included angle of 55° and a relief angle of 0° provides predictable cutting engagement and secure seating in a compatible clamping system. The 1.2 mm corner radius and plate thickness 6.35 mm balance edge strength and cutting performance, helping to avoid premature chipping when machining demanding workpieces. Because the insert is ISO‑standardised, interchangeability with suitably specified holders is supported; compatibility is determined by form, clearance angle, tolerance class, fastening and plate size. Efficient chip control for better surface quality and throughput A double‑sided chipbreaker is integrated to shape and evacuate chips effectively across a range of cutting conditions, which reduces the need for secondary finishing and improves cycle times. Controlled chip formation contributes directly to improved surface finish and lowers the risk of rework. The insert is intended to be used as part of a system—appropriate external holders, underplates and replacement screws must be chosen to maintain clamping stability and to make full use of the chip control geometry. Clear application scope and system considerations Specified for turning applications, the insert is particularly suited to heat‑resistant alloys and harder materials when machining conditions and rigidity are sufficient. ISO‑compliant indexable plates such as this require the correct holder geometry and clamping parts; the system typically comprises the indexable plate, a matched external holder or boring bar, an underplate/clamp set and the correct replacement screws. Selection of the chipbreaker style and grade should be matched to the workpiece material, the machining strategy and the available machine stability to achieve consistent results. For application advice or to order the Tungaloy DNMG150612 AH8005 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — consultants are available to recommend the correct holder and chipbreaker combination for the required turning task. Technical specifications Article number: 6741669 Manufacturer SKU: TUN6741669 SKU: 6741669-Tungaloy Model series: ISO-Drehwendeschneidplatten Dimensions & angles Insert size: 15 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Included angle: 55° Materials & special features PVD-coated cemented carbide AH8005 Double-sided chipbreaker Rhombic plate form (DNMG) Cylindrical hole (with hole) Application: Turning System requirement: holder, underplate/clamp set, replacement screws FAQ What materials is this insert best suited for? The DNMG150612 AH8005 insert is optimised for heat‑resistant alloys and harder materials thanks to the wear‑resistant PVD‑coated carbide grade AH8005, which maintains edge life under elevated temperatures. Is the insert compatible with standard DNMG holders? Yes, the insert follows ISO DNMG geometry; compatibility depends on holder form, free angle, tolerance class, fastening method and plate thickness, so holders specified for DNMG150612 will be compatible. How does the chipbreaker affect cutting performance? The double‑sided chipbreaker on this indexable plate improves chip formation and evacuation, which enhances surface finish and reduces the need for secondary operations when the correct chipbreaker is chosen for the workpiece. Can the insert be used on a boring bar for internal turning? The indexable plate can be used for internal or external turning provided the chosen boring bar offers the required rigidity and supports DNMG geometry and plate thickness. How is the insert mounted and indexed? The plate is secured via the cylindrical hole and clamping system in a compatible holder; the ISO format allows indexing to the unused cutting edges once an edge is worn. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150612 AH8015 Wendeplatten - Tungaloy
High process security and balanced wear resistance make this insert a reliable choice for turning heat‑resistant alloys; the PVD‑coated carbide grade AH8015 and the 55° rhombic geometry combine edge stability with effective chip control. Order the inserts directly via Metav Werkzeuge or consult our specialists for selection and availability. DNMG150612 AH8015 Tungaloy indexable turning insert — PVD‑coated carbide, 55° rhombic The DNMG150612 AH8015 is an ISO‑standard rhombic indexable insert engineered for external and internal turning of heat‑resistant alloys and other demanding materials. ISO rhombic design, 55° cutting angle PVD-coated carbide for wear resistance Double-sided chipbreaker for versatile cutting Cylindrical hole with secure fixation Consistent performance for heat‑resistant alloys The AH8015 grade is specified as a first choice for general machining of heat‑resistant alloys, offering a deliberate balance between wear resistance and cutting‑edge stability. The PVD‑coated carbide substrate resists abrasive and adhesive wear, extending productive tool life and maintaining surface quality over longer tool cycles. Thanks to the rhombic 55° geometry and a 1.2 mm corner radius, the insert delivers predictable cutting forces and reduced vibration in many turning operations, which supports higher process reliability and repeatable component quality. Predictable compatibility and easy tool selection Built to ISO dimensions, the DNMG‑format insert ensures interchangeability across standard holders when form, relief angle, tolerance class, fastening, size and thickness match. The ISO designation 150612 and a 6.35 mm plate thickness simplify selection for existing tool holders and turret systems. Where clamping stability is critical, the cylindrical hole and matching fasteners provide secure fixation, while the double‑sided chipbreaker minimises the number of different items required in stock. This structured compatibility reduces setup checks and helps to standardise machining routines across multiple machines. Practical shopfloor advantages and reduced inventory complexity A double‑sided insert with a versatile chipbreaker reduces tooling variety and cost per cutting edge under many production regimes. The rhombic shape and the 0° relief angle suit a range of roughing and finishing tasks, while the PVD film supports consistent edge wear and surface finish expectations. For production planners this means fewer changeovers and improved uptime; for programmers and operators it means stable feed and speed ranges that are easier to validate. Where application specifics demand adapted chipbreakers or alternative grades, technical advisors can recommend optimal combinations to match material, machining strategy and machine rigidity. Contact Metav Werkzeuge for application advice, stock status and compatibility checks for the Tungaloy AH8015 DNMG150612 indexable inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947267 Manufacturer SKU: TUN6947267 SKU: 6947267-Tungaloy Model series: ISO-indexable turning inserts Designation: DNMG150612 AH8015 Tungaloy indexable insert Facts Cutting angle: 55° Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 15 ISO designation: 150612 Relief angle: 0° Special features Shape: rhombic Material: carbide Coating: PVD Chipbreaker: double-sided Mounting: with cylindrical hole Application: turning Grade: AH8015 FAQ Is this insert suitable for machining heat‑resistant alloys? Yes. The AH8015 grade is specified as first choice for general machining of heat‑resistant alloys; the PVD‑coated carbide composition balances wear resistance and edge stability for these materials. Which holders are compatible with the DNMG150612 format? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the DNMG format (ISO 150612) and the 6.35 mm plate thickness are standard references for selecting a matching external holder or boring bar. Can this insert be used for both external and internal turning? Yes. The rhombic 55° geometry and the double‑sided chipbreaker make the insert suitable for external and many internal turning operations when the correct holder and tool overhang are chosen. What practical benefit does the double‑sided chipbreaker provide? A double‑sided chipbreaker increases versatility and reduces inventory by providing two usable profiles per insert, while supporting consistent chip control across varied feeds and depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH8015 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade AH8015, a 55° rhombic geometry and a 1.2 mm corner radius delivers dependable wear resistance and edge stability for machining heat-resistant alloys; this makes the insert a cost-effective choice for consistent turning operations. Order directly via Metav Werkzeuge or consult the Metav team for application-specific recommendations. DNMG 150612 AH8015 indexable turning insert by Tungaloy — PVD-coated carbide, 55° rhombic geometry The DNMG150612 AH8015 is an ISO-format indexable turning insert designed for external and internal turning, offering a balanced mix of wear resistance and cutting-edge stability for heat-resistant alloys and general turning tasks. ISO 150612 rhombic insert 55° PVD-coated carbide grade AH8015 Double-sided chipbreaker for stability Cylindrical hole for standard clamping Engineered for reliable turning performance The insert combines a PVD-coated carbide grade with a 55° rhombic geometry, creating a reliable tool for demanding turning work. The PVD layer enhances surface hardness and reduces adhesive wear, while the substrate material provides toughness against mechanical shock. With a corner radius of 1.2 mm, the geometry supports consistent engagement and a stable cut, reducing the risk of premature chipping. These engineered characteristics result in improved process reliability when machining heat-resistant alloys and other demanding materials, translating into predictable tool life and fewer interruptions on the production floor. Practical benefits for workshop use and process efficiency Designed as a double-sided insert with a cylindrical hole, the component allows two cutting edges per side and straightforward clamping in compatible holders, which helps to lower tool cost per edge. The flat 6.35 mm thickness and 15 mm inscribed circle offer robust seat stability in standard ISO holders, while the 0° relief angle supports versatile cutting geometries. Together, these features reduce set-up time and contribute to repeatable results in batch production. The insert’s balanced combination of wear resistance and edge stability is particularly suitable when economic tool consumption and steady component quality are primary concerns. Compatibility, application range and handling advice As part of an ISO turning insert system, the item is intended for use with compatible external holders or boring bars that match form, free angle, tolerance class, fastening and size. The insert is specified for general turning tasks and is particularly recommended for machining heat-resistant alloys; selecting an appropriately matched chipbreaker and grade will further improve chip control and surface finish. For clamping, ensure the holder aligns with the ISO 150612 form and that the cylindrical hole and locating features are clean and undamaged to guarantee secure seating and repeatable positioning. Routine inspection of the cutting edge and correct torque on the clamp screw will prolong tool life and maintain machining accuracy. Contact Metav Werkzeuge for tailored advice on holder compatibility and process optimisation for this Tungaloy insert, quoting SKU 6947192-Tungaloy or manufacturer SKU TUN6947192 Technical data Article number: 6947192 SKU: 6947192-Tungaloy Manufacturer SKU: TUN6947192 Designation: DNMG150612 AH8015 Tungaloy indexable insert Model series: ISO turning indexable inserts Application: Turning Facts Inscribed circle: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Insert angle: 55° ISO code: 150612 Special features Coating / grade: AH8015, PVD-coated carbide Chipbreaker: double-sided Shape: rhombic Hole: with hole, cylindrical hole System assembly: ISO insert, requires compatible holder, backing plate and clamping set FAQ What materials is this insert suited for? The DNMG150612 AH8015 insert is formulated for general turning and performs well on heat-resistant alloys; the AH8015 grade balances wear resistance with edge stability. How does the PVD coating affect performance? The PVD-coated surface increases hardness and reduces adhesion, improving wear resistance and extending effective tool life under high-temperature cutting typical of heat-resistant materials. Is the insert reversible and how many cutting edges are available? This is a double-sided ISO insert; it provides multiple usable edges when indexed correctly and clamped in a compatible holder, improving cost-efficiency per edge. Which holder features must match for secure clamping? Holder compatibility depends on insert form, free angle, tolerance class, fastening, size and thickness; the cylindrical hole must align with the holder’s locating pin and clamp design for reliable seating. Can this insert be used for internal and external turning? Yes, the geometry and grade make it suitable for both external and internal turning operations when the correct holder and cutting parameters are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH8015 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated AH8015 grade and the 55° rhombic geometry for a balanced combination of wear resistance and cutting‑edge strength; order the DNMG150612 AH8015 insert via Metav Werkzeuge or consult their advisors for application‑specific guidance. DNMG150612 AH8015 — Tungaloy ISO turning indexable insert for turning A DNMG150612 AH8015 insert engineered for external and internal turning of heat‑resistant alloys, combining PVD coating and a robust geometry for consistent machining performance ISO‑standard rhombic insert, 55° cutting angle PVD‑coated carbide grade AH8015 for heat‑resistant alloys Double‑sided geometry with cylindrical hole 1.2 mm corner radius for stable cutting edge High‑performance grade for heat‑resistant alloys The DNMG150612 AH8015 is specified with a PVD‑coated cemented carbide substrate and the AH8015 grade, selected as a first choice for the general machining of heat‑resistant alloys. This combination offers a measured trade‑off between wear resistance and edge stability, enabling longer uninterrupted cycles and more predictable tool life. The 55° rhombic geometry delivers a reliable cutting attitude for both facing and contouring, while the 1.2 mm corner radius supports robust engagement at moderate depths, reducing edge chipping and preserving surface quality. Seamless integration into ISO tool systems Designed as an ISO‑standard turning insert, compatibility with external holders and boring bars depends on form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic plate (15 mm) with a cylindrical hole and double‑sided layout simplifies clamping and indexing in standard toolholders. Choosing matching holders and a proper underlay/clamping set ensures accurate seating and repeatable positioning, which in turn supports consistent machining tolerances and reduces setup time in small‑batch and serial production alike. Controlled chips and predictable process security The insert’s geometry and chip‑forming characteristics provide optimised chip control, particularly when paired with appropriate feed and speed regimes for heat‑resistant materials. Stable chip formation lowers the risk of interruptions and contributes to a consistent surface finish. The double‑sided construction extends effective cutting life by allowing indexing to fresh cutting edges, contributing to higher productivity and lower per‑edge costs. Overall, the specification promotes process security and a dependable machining rhythm for demanding turning operations. For application recommendations, holder compatibility or to reserve DNMG150612 AH8015 inserts from Tungaloy, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or Telephone: +49 2822 7131930 Technical Data Article number: 6947161 Manufacturer SKU: TUN6947161 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 1.2 mm Insert size: 15 mm Plate thickness: 6.35 mm Cutting angle: 55° Clearance angle: 0° Special features Grade: AH8015, PVD‑coated cemented carbide Geometry: rhombic, double‑sided Hole: cylindrical Application: turning of heat‑resistant alloys System components: compatible with ISO holders, underlay, clamping set, replacement screws FAQ Which materials is this insert intended for? The DNMG150612 AH8015 insert is intended primarily for turning heat‑resistant alloys, using the PVD‑coated AH8015 grade to balance wear resistance and edge stability. How is holder compatibility determined? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; the insert features a rhombic 15 mm format and a cylindrical hole for standard ISO holders (see model series and facts for dimensions). What does the AH8015 grade provide? AH8015 offers a combination of wear resistance and cutting‑edge stability suited to general machining of heat‑resistant alloys, supporting longer tool life and steady machining performance. Does the double‑sided design extend service life? Yes, the double‑sided geometry allows indexing to a fresh edge, which extends operational life and helps reduce tooling costs per edge. What additional components are required to assemble the system? A compatible ISO external holder or boring bar, suitable underlay/clamping set and replacement screws are required to secure the insert and ensure correct seating for turning operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150612 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced combination of PVD-coated carbide wear resistance and a 1.2 mm corner radius for reliable edge strength and consistent surface finish; order the insert through Metav Werkzeuge or consult their specialists for technical guidance. DNMG150612 AH8015 Tungaloy indexable turning insert — PVD-coated carbide, 55° rhombic geometry The DNMG150612 AH8015 is an ISO‑standard indexable insert designed for external and internal turning of heat‑resistant alloys, offering a balanced mix of wear resistance and cutting‑edge stability for general turning applications. PVD-coated carbide for heat-resistant alloys 55° rhombic geometry, cylindrical hole Double-sided chipbreaker for flexible use 1.2 mm corner radius for consistent profile High productivity through a balanced cutting grade The combination of a PVD-coated substrate and a grade engineered for heat‑resistant alloys delivers a reliable compromise between wear resistance and edge stability. The coating reduces adhesive wear and improves resistance to high cutting temperatures, which in turn helps to maintain cutting performance over longer cycles. For production environments where consistent tool life matters, this grade supports predictable machining and helps reduce unscheduled stops, making the insert suitable for a wide range of turning tasks in industrial settings. Fast setup and assured compatibility with ISO holders The ISO designation (DNMG) and the standardised dimensions allow clear matching to compatible holders; fit depends on geometry, relief angle, tolerance class, fastening method, overall size and thickness. The insert’s 55° rhombic geometry and cylindrical hole enable secure clamping in holders designed for DNMG‑style inserts, while the 0° relief angle supports stable cutting on typical external and internal turning set‑ups. This standardisation simplifies tool planning and inventory control in mixed‑fleet workshops, reducing downtime during tool changeovers. Consistent part quality and economical indexability A 1.2 mm corner radius provides a robust cutting edge that helps to absorb cutting forces and to produce a repeatable profile on the workpiece, improving surface finish and dimensional stability. The double-sided chipbreaker extends service by allowing both faces to be used before replacement, lowering cost per cutting edge. Overall, the insert’s balance between edge strength and wear resistance supports repeatable results and makes it a pragmatic choice for medium‑to‑high stability turning operations on heated alloys. Contact Metav Werkzeuge for availability and compatibility advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss supply of Tungaloy indexable inserts and suitable holders Technical Data Manufacturer item number: 6936107 Manufacturer SKU: TUN6936107 SKU: 6936107-Tungaloy Series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Geometry: DNMG (55° rhombic) Corner radius: 1.2 mm Relief angle: 0° Thickness: 6.35 mm Inscribed circle/size: 15 mm Special features Grade/coating: AH8015, PVD-coated carbide Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal) Compatibility: ISO indexable insert system FAQ Which materials is this insert best suited to machine? The AH8015 grade is formulated for machining heat‑resistant alloys; the PVD-coated carbide composition of the insert provides improved wear resistance under elevated cutting temperatures. How does the DNMG geometry affect holder selection? DNMG indicates a 55° rhombic insert form; holders and adapters compatible with DNMG dimensions and a cylindrical locating hole will accept this insert and ensure correct clamping and orientation. Can both sides of the insert be used before replacement? Yes — the insert features a double-sided chipbreaker, allowing indexation of both active faces to extend usable life and reduce tooling costs. What benefits does the 1.2 mm corner radius bring to finished parts? A 1.2 mm radius increases edge strength and helps produce a consistent part profile with a stable surface finish, particularly when turning components that require dimensional repeatability. Is this insert supplied with mounting hardware or a holder? The delivery comprises the indexable insert itself; holders, clamps and replacement screws are separate items and should be matched to the insert’s ISO dimensions and fastening style. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide wear resistance, precise ISO compatibility and an integrated double-sided chipbreaker for reliable turning of heat-resistant alloys; order the DNMG150612 AH8015 insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150612 AH8015 Tungaloy turning insert — ISO rhombic, PVD-coated DNMG150612 AH8015 Tungaloy indexable insert for general turning, designed for external and internal machining of heat-resistant alloys with predictable edge life and consistent chip control DNMG150612 grade AH8015 PVD-coated carbide insert Double-sided chipbreaker for stable chip control ISO-standard rhombic shape, 55° cutting angle Cylindrical hole and 6.35 mm plate thickness Consistent cutting performance for heat-resistant alloys The PVD-coated cemented carbide grade AH8015 balances wear resistance with edge stability, making it well suited for machining heat-resistant alloys where both tool life and surface finish matter. The coating reduces adhesion and thermal wear, so cutting forces remain stable over longer cycles; this leads to fewer tool changes and more predictable cycle times. The result is improved process economy without sacrificing component quality. Secure seating and precise geometry for repeatable results Compliance with ISO standards and a rhombic geometry with a 55° cutting angle ensure compatibility with a wide range of standard holders. The 0° relief angle, 6.35 mm plate thickness and 1.2 mm corner radius provide defined contact conditions and stable clamping, while the cylindrical hole gives reliable axial positioning. Match holder form, relief angle, tolerance class, fixing method, size and thickness to the insert for correct fitment and reproducible part tolerances. Effective chip control and system integration to boost productivity A double-sided chipbreaker and symmetric cutting edges allow the insert to be rotated for extended life and consistent chip formation during both external and internal turning. As part of a full system — ISO insert, suitable external holder or boring bar, clamping pad and fastening screw — the component helps reduce downtime and maintain surface quality. Technical assistance and specification checks are available from Metav Werkzeuge to ensure optimal grade and chipbreaker choice for specific materials. Choose the Tungaloy DNMG150612 AH8015 insert for balanced durability and edge stability and contact Metav Werkzeuge for tailored machining recommendations and order processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947218 Manufacturer SKU: TUN6947218 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: AH8015 (PVD-coated) Core dimensions Corner radius: 1.2 mm Cutting angle: 55° Relief angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Design and special features Rhombic plate shape (DNMG) Cylindrical hole for fastening Double-sided chipbreaker ISO-standard indexable insert Suitable for external and internal turning Recommended for heat-resistant alloys FAQ What materials is this insert suitable for? The DNMG150612 AH8015 insert from Tungaloy is optimised for machining heat-resistant alloys and general alloy steels where a balance of wear resistance and edge stability is required. How does the chipbreaker affect machining? The double-sided chipbreaker on the DNMG150612 AH8015 promotes controlled chip formation and easier evacuation, which helps maintain surface finish and reduces the risk of built-up edge in demanding turning operations. Which holders are compatible with this insert? Compatibility depends on the holder's form, relief angle, tolerance class, fixing method, size and thickness; the ISO-standard rhombic geometry and cylindrical hole of this insert make it suitable for standard DNMG holders and compatible external holders or boring bars. How does the AH8015 grade differ from other grades? AH8015 is a PVD-coated cemented carbide grade that offers a practical compromise between wear resistance and edge stability, making it a first choice for a wide range of turning tasks on heat-resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com