DNMG 150612 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade AH8015, a 55° rhombic geometry and a 1.2 mm corner radius to achieve stable cutting performance when turning heat‑resistant alloys; order directly via Metav Werkzeuge or consult the team for application guidance. DNMG150612 AH8015 Tungaloy indexable turning insert — 55° rhombic, PVD‑coated carbide The DNMG150612 AH8015 Tungaloy is an ISO‑standard indexable insert engineered for external and internal turning, offering a balanced mix of wear resistance and cutting‑edge stability for heat‑resistant alloys. ISO rhombic DNMG 55° geometry PVD‑coated carbide AH8015 for heat alloys 1.2 mm corner radius for robust edge Double‑sided chipbreaker, cylindrical hole Balanced carbide grade for demanding alloy turning The insert is manufactured in a PVD‑coated carbide grade AH8015, selected for a wide range of heat‑resistant alloys where a compromise between wear resistance and edge stability is required. The PVD coating forms a thin, hard layer that reduces abrasive wear and improves oxidation resistance at elevated temperatures. For production environments that prioritise repeatable results, this composition delivers consistent tool life while maintaining acceptable surface finish levels on difficult‑to‑cut materials. Geometry engineered for secure, accurate machining A 55° rhombic geometry paired with a 1.2 mm corner radius provides a controlled engagement with the workpiece, which helps to reduce vibration and extend insert life in interrupted cuts. The insert’s 0° relief angle and standard ISO shape mean compatibility with a broad range of holders is largely determined by matching the insert form, size and thickness. The double‑sided chipbreaker improves chip control across both cutting edges, aiding swarf evacuation and contributing to process stability in both external and internal turning operations. System compatibility and practical handling advantages The component is supplied with a cylindrical hole for secure fastening and a plate thickness of 6.35 mm, which together ensure a reliable clamping interface in approved toolholders. Compatibility with a holder is defined by the insert’s form, relief angle, tolerance class, fastening method, size and thickness. The ISO‑standard format allows straightforward integration into existing tooling systems, enabling shops to maintain productivity without extensive fixture changes. The insert is best applied where a general‑purpose grade for heat‑resistant materials is required and where predictable, repeatable performance is a priority. For operational reliability with the Tungaloy AH8015 grade, contact Metav Werkzeuge for tailored application advice or to secure supply from stock — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6741670 SKU: 6741670-Tungaloy Manufacturer SKU: TUN6741670 Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Geometry angle: 55° Relief angle: 0° Special features Material: carbide Coating: PVD Shape: rhombic Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Application: turning Model series: ISO turning indexable inserts Grade: AH8015 FAQ Is this insert suitable for turning heat‑resistant alloys? Yes. The DNMG150612 AH8015 Tungaloy indexable turning insert uses the AH8015 PVD‑coated carbide grade, which is specified for the general machining of heat‑resistant alloys where a balance of wear resistance and edge stability is required. Which toolholders are compatible with this insert? Compatibility is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; the DNMG150612 AH8015 Tungaloy insert will fit holders designed for ISO DNMG 150612 inserts when those parameters match. What are the key geometry details of the insert? The plate features a 55° rhombic geometry, a 1.2 mm corner radius, a plate thickness of 6.35 mm and incorporates a cylindrical hole for fastening. Does the insert provide good chip control? Yes. The insert is equipped with a double‑sided chipbreaker, which enhances chip formation and evacuation for a range of turning conditions, supporting process stability. For which operations is this insert intended? The insert is intended for external and internal turning; the specific chipbreaker and grade should be selected according to the workpiece material, machining strategy and required stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150612 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced combination of PVD-coated AH8015 grade and the ISO DNMG150612 geometry for stable, long-lasting turning of heat-resistant alloys; the 55° rhombic form with a 1.2 mm corner radius delivers strength at the cutting edge. Order the insert directly via Metav Werkzeuge or contact our consultants for application-specific selection. DNMG150612 AH8015 Tungaloy turning insert (ISO DNMG; 55° rhombic; 1.2 mm radius) A DNMG150612 AH8015 Tungaloy turning insert designed for ISO-compliant external and internal turning of heat-resistant alloys and general turning applications. PVD-coated carbide AH8015 ISO DNMG150612 rhombic form 55° geometry with 1.2 mm radius Double-sided chipbreaker with cylindrical hole Reliable edge life for demanding alloys The PVD-coated AH8015 grade combines wear resistance and edge stability, making the insert particularly suitable for machining heat-resistant alloys where thermal and abrasive wear occur. The balanced microstructure of the carbide substrate and the coating technology reduce flank wear and maintain cutting-edge integrity, which translates into more consistent component quality and longer intervals between indexings. The DNMG150612 geometry, with its 55° rhombic form and 1.2 mm corner radius, provides a robust cutting edge that supports both medium and heavier cuts without compromising surface finish. Fast integration into ISO tooling systems for predictable production Designed as an ISO-compliant indexable insert, compatibility with a toolholder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The insert’s 6.35 mm thickness and cylindrical hole enable secure clamping in standard DNMG holders and boring bars, while the double-sided design offers economical use by providing two indexed cutting edges. In a typical tooling system—insert, matching external holder or boring bar, shim/clamp set and replacement screws—the standard format simplifies procurement and reduces stocking complexity, so machine set-up is faster and tool-change downtime is minimised. Better chip control and application-driven selection guidance The double-sided chipbreaker suits a range of turning conditions when matched to workpiece material and machine stability. For best results, select the chipbreaker style and grade in relation to the workpiece, cut depth and feed: coarser chip control and larger radii favour interrupted cuts and heavy engagement, while finer chipforming improves surface finish in light finishing passes. The insert’s geometry supports both external and internal turning operations, offering process reliability and repeatable results when toolholding and cutting data are adapted to the application. Contact Metav Werkzeuge to specify the DNMG150612 AH8015 turning insert and to arrange matching holders or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947096 Manufacturer SKU: TUN6947096 SKU: 6947096-Tungaloy Model series: ISO indexable turning inserts Facts Corner radius: 1.2 mm Main angle: 55° Clearance angle: 0° Thickness: 6.35 mm Size: 15 mm Special features PVD-coated carbide Grade AH8015 Rhombic 55° form Double-sided chipbreaker Cylindrical hole ISO DNMG150612 format FAQ Which materials is this insert suitable for? The AH8015 grade is intended for machining heat-resistant alloys and comparable materials; the DNMG150612 geometry is suitable for general turning when matched with the appropriate chipbreaker and cutting data. Can this insert be used for both external and internal turning? Yes, the insert is designed for both external and internal turning operations when combined with a suitable holder or boring bar and correct clamping. How does the double-sided design affect cost-effectiveness? Being double-sided provides two usable cutting edges per index, which increases tool life per insert and lowers the cost per produced component when the insert is used in appropriate conditions. What should be considered when choosing a compatible holder? Compatibility is governed by form, clearance angle, tolerance class, fastening type, size and thickness; confirm the holder matches the ISO DNMG format and 6.35 mm thickness to ensure secure clamping. Is the 1.2 mm corner radius suitable for finishing passes? A 1.2 mm radius offers a compromise between edge strength and surface finish; for very fine finishing, a smaller radius is normally chosen, whereas 1.2 mm gives greater robustness for semi-finishing and general turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide (AH8015) and ISO‑compliant geometry for a reliable balance of wear resistance and cutting‑edge stability in turning operations. Order the insert directly via Metav Werkzeuge or contact the specialists for application and holder compatibility advice. DNMG150612 AH8015 indexable insert for turning — Tungaloy The DNMG150612 AH8015 is an ISO‑standard rhombic indexable insert designed for external and internal turning, optimised for heat‑resistant alloys and general machining tasks. DNMG150612 AH8015 indexable insert for turning PVD-coated carbide grade AH8015 for heat-resistant alloys Rhombic 55° geometry, 6.35 mm plate thickness Double-sided with cylindrical hole and 1.2 mm radius High-performance grade for heat‑resistant alloys and steady tool life The combination of PVD-coated carbide and the AH8015 grade provides a technical balance between wear resistance and edge stability, making this insert a strong choice for machining heat‑resistant alloys where temperature and adhesion risk are elevated. The PVD layer reduces flank wear and improves resistance to built‑up edge, while the substrate carbide sustains mechanical strength; this delivers predictable tool life and consistent component tolerances. For production environments where repeatability matters, the material choice and coating technology translate directly into fewer tool changes and steadier cycle times. Geometry and clamping that ensure consistent cutting results The rhombic 55° geometry and 1.2 mm corner radius create a versatile cutting profile suitable for a range of turning tasks, from profiling to light shoulder work. The insert is double‑sided, allowing indexation that halves the effective tooling cost per cutting edge. Compatibility with the toolholder depends on form, relief angle, tolerance class, fastening and plate thickness; correct selection of the outer holder or boring bar, plus the correct clamp set and replacement screw, secures the insert and reduces vibration. Because the insert conforms to ISO standards, choosing a matching holder is straightforward and supports process stability on CNC lathes. Practical workshop advantages: productivity and surface quality In everyday shop use the combination of the insert’s geometry, coating and double‑sided design improves both surface finish and productivity. The 6.35 mm plate thickness contributes to rigidity under load, while the cylindrical centre hole and standard mounting make replacement quick and repeatable. For job shops and production lines aiming to reduce non‑productive time, the ability to index multiple edges and the balanced performance of the grade lead to fewer interruptions and a more reliable machining schedule. When fitted in an appropriate holder, the DNMG150612 AH8015 delivers consistent dimensional results and a stable cutting process across mixed batch sizes. For a technical consultation on toolholder compatibility, chipbreaker selection or to request cutting data for the Tungaloy AH8015 grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — the team will advise on the optimal insert and holder configuration for the application. Technical data Article number: 6947241 Manufacturer SKU: TUN6947241 SKU: 6947241-Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 1.2 mm Insert angle: 55° Plate thickness: 6.35 mm Plate size: 15 mm Special features Material: carbide Coating: PVD Grade: AH8015 Geometry: rhombic, 55° Chipbreaker: double-sided Hole: cylindrical Type: indexable insert for turning Application: turning FAQ What materials is this insert suited for? The DNMG150612 AH8015 insert is optimised for heat‑resistant alloys and offers broad applicability for steels and other tougher materials when an AH8015 grade is appropriate. How does the AH8015 grade benefit machining? AH8015 combines a wear‑resistant PVD coating with a robust carbide substrate to extend cutting life and maintain edge stability under elevated temperatures. Which holder features are essential for reliable clamping? A matching holder must correspond to the insert form, relief angle and tolerance class; the correct clamp set and replacement screws are required to secure the DNMG150612 and avoid movement during cutting. Is the insert indexable and economical for production? Yes, the insert is double‑sided, enabling multiple indexations and effective cost per cutting edge, which supports higher productivity in continuous production. What surface finish improvements can be expected? When used with the recommended chipbreaker and stable clamping, the combination of geometry and PVD coating improves surface finish and reduces the need for secondary finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide, precise 1.2 mm corner radius, and ISO conformity for consistent turning productivity; order and discuss holder compatibility via Metav Werkzeuge or consult our technical team for application-specific advice. DNMG 150612 AH8015 Tungaloy indexable insert for turning The DNMG150612 AH8015 is an ISO-standard indexable turning insert for external and internal turning, featuring a 55° rhombic form and a cylindrical centre hole for secure clamping. ISO-standard rhombic insert, 55° geometry PVD-coated carbide for heat-resistant alloys Double-sided chipbreaker for economy 1.2 mm corner radius for robust edge life Consistent performance in general turning operations The PVD-coated carbide grade AH8015 is specified for the general machining of heat-resistant alloys; it balances wear resistance and edge stability, which reduces the frequency of insert changes and supports longer uninterrupted machine cycles. The rhombic 55° geometry provides a versatile cutting angle for both finishing and medium-depth cuts, while the 1.2 mm corner radius helps maintain a stable cutting edge under intermittent loads. For production environments where repeatability matters, the ISO conformity ensures predictable seating and clamping when paired with compatible holders. Stable chip control and predictable tool life A double-sided chipbreaker design improves chip formation across a range of feeds, helping to avoid rattling in the toolholder and enhancing surface finish consistency. The PVD coating reduces built-up edge when machining tougher alloys, and the substrate carbide core sustains the cutting edge at elevated temperatures. Together these features contribute to measurable productivity gains: fewer interruptions for tool changes and more reliable surface quality, which translates into lower unit costs over longer production runs. Fit, handling and compatibility explained for the workshop Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the insert’s cylindrical centre hole and rhombic shape make selection straightforward for standard ISO holders. The nominal plate size is 15 mm with a thickness of 6.35 mm; the specified 0° clearance angle and 55° cutting geometry should be matched to the holder and machining strategy. For those less familiar with insert selection: the ISO code and dimensions facilitate quick cross-referencing with holders and clamping sets, avoiding guesswork and ensuring correct seating and repeatable clamp torque. Practical benefits for process reliability and shopfloor efficiency Using a grade optimised for heat-resistant alloys reduces downtime caused by edge chipping and wear, while the double-sided format extends usable life per insert, improving cost efficiency per component. The combination of PVD coating, robust carbide substrate and a well-defined chipbreaker yields stable cutting performance and consistent surface quality, particularly in serial production. When paired with the appropriate holder and clamping kit, this insert supports a streamlined workflow and predictable cycle times. Contact Metav Werkzeuge for tailored advice on matching holders and selecting the right chipbreaker for the intended material and process Technical Data Article number: 6947129 Manufacturer SKU: TUN6947129 SKU: 6947129-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: DNMG150612 Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Geometry angle: 55° Clearance angle: 0° Centre hole: with cylindrical hole Special features Material: carbide Coating: PVD Chipbreaker: double-sided Plate form: rhombic Typical application: turning FAQ What materials is this insert suited for? The DNMG150612 AH8015 insert is optimised for machining heat-resistant alloys; the PVD-coated carbide grade provides a balance of wear resistance and edge stability for such materials. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge robustness and reduces the risk of chipping during interrupted cuts, which helps maintain consistent surface finish and extends insert life. Is the insert compatible with standard ISO holders? Yes, the DNMG150612 follows ISO geometry conventions; compatibility will depend on holder form, size, thickness and fastening method, so matching those parameters ensures correct seating. Can this insert be used for both internal and external turning? The rhombic 55° geometry and cylindrical centre hole make the insert suitable for both external and internal turning when used with an appropriate holder and correct approach angles. What advantages does the PVD coating provide? The PVD coating on the AH8015 grade reduces built-up edge and improves thermal resistance, supporting longer tool life and consistent cutting performance on heat-resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930
DNMG 150612 AH8015 Wendeplatten - Tungaloy
High-performance performance and reliable edge stability from a PVD-coated carbide AH8015 grade combine efficient wear resistance with strong cutting-edge stability; the double-sided, ISO‑format design reduces tooling costs through simple indexing. Order the DNMG150612 AH8015 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150612 AH8015 Tungaloy turning insert — PVD-coated carbide, 55° The DNMG150612 AH8015 Tungaloy is an ISO‑format, rhombic turning insert engineered for external and internal turning of heat‑resistant alloys, offering a balance of wear resistance and edge stability in general turning applications. PVD-coated carbide grade AH8015 ISO DNMG150612 rhombic format Double-sided with cylindrical hole 55° lead angle and 0° clearance Maximise machining efficiency and tool life The combination of a PVD-coated surface and carbide substrate in grade AH8015 delivers stable performance when machining heat‑resistant alloys. The coating reduces abrasive wear and helps maintain edge geometry at elevated temperatures, which in turn prolongs tool life and reduces downtime for index changes. As a result, cycle times can be optimised while preserving consistent surface finish and dimensional accuracy for medium-duty to demanding turning tasks. Secure process stability and straightforward holder compatibility Designed to the ISO DNMG format, the insert ensures predictable mechanical fit in standard external holders and boring bars. The rhombic shape with a 55° lead angle gives a reliable cutting direction for both external and internal turning, while the cylindrical hole and standard thickness support firm clamping and repeatable positioning. System compatibility depends on form, clearance, tolerance class, fastening and thickness; selecting the correct holder and clamp set keeps the cutting edge secure and minimises vibration for consistent part quality. Economical handling and controlled chip formation The indexable, double-sided configuration allows rotation to a fresh cutting edge, lowering cost per edge and simplifying inventory. The integrated double-sided chipbreaker promotes manageable chip shapes when paired with suitable grade and cutting parameters, reducing risk of entanglement and improving process safety. With a 1.2 mm corner radius, the insert balances edge strength and profile fidelity, producing robust features without compromising on detail in turned components. For tailored recommendations and rapid supply, contact Metav Werkzeuge quoting TUN6766734; the technical team is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to advise on holder selection and cutting data. Technical Data Article number: 6766734 Manufacturer SKU: TUN6766734 Label / Name: DNMG150612 AH8015 Tungaloy-Wendeplatte Series: ISO turning inserts Facts Format: DNMG150612 Shape: Rhombic (55° lead angle) Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Hole: with cylindrical hole Manufacturer article number: 6766734 Special features Material: carbide Coating: PVD Grade: AH8015 Chipbreaker: double-sided Application: Turning (external and internal) System components: insert, holder/boring bar, clamp set, replacement screws FAQ What materials is this insert suitable for? The DNMG150612 AH8015 insert is specified for general machining of heat‑resistant alloys and covers a broad range of materials where a balance between wear resistance and edge stability is required. How does the PVD coating benefit cutting performance? A PVD coating on the AH8015 grade reduces abrasive wear and improves thermal resistance, allowing the insert to retain cutting-edge geometry longer and maintain consistent surface finish under elevated temperatures. Is the insert indexable and economical to use? Yes, the insert is double‑sided and indexable; each rotation exposes a fresh cutting edge, lowering the cost per edge and simplifying stock management. Which holder features are critical for compatibility? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG ISO format ensures fit with standard holders when these parameters are matched. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of high surface quality, stable chip control and straightforward holder compatibility for efficient finishing operations; order the insert directly via Metav Werkzeuge or contact our consultants for tailored recommendations. DNMG150612 NS9530 — ISO turning insert for finishing by Tungaloy The DNMG150612 NS9530 is an ISO-standard rhombic turning insert designed for finishing operations on steel, delivering low cutting forces and consistently high surface quality in continuous cuts. ISO rhombic DNMG form, 55° cutting geometry NS9530 uncoated cermet for fine finishing Sharp cutting edge for high surface finish Double-sided chipbreaker, cylindrical hole design Consistent finishing performance and material fit The insert is manufactured in the NS9530 grade as an uncoated cermet, optimised for machining steel in finishing passes. This composition gives a fine finishing capability with low cutting forces, which reduces vibration and helps maintain dimensional accuracy on longer workpieces. For operations where surface integrity and repeatability matter, the material pairing supports continuous cuts and smaller depths of cut without compromising the final appearance of the component. Reliable geometry and easy integration with toolholders Engineered to ISO standards, the component’s DNMG150612 geometry and 55° cutting angle offer a balanced mix of strength and accessibility for external and internal turning. The 1.2 mm corner radius contributes to edge robustness while enabling good surface finishes, and the 6.35 mm thickness provides stable clamping. A cylindrical hole ensures secure fastening and compatibility with a wide range of indexable toolholders; selection of the matching holder should consider form, clearance angle, tolerance class, fastening method and plate size to achieve optimal run-out and stability. Productivity advantages and handling benefits A double-sided chipbreaker and a sharp cutting edge reduce chip-related interruptions and improve chip control during continuous finishing passes. The insert’s configuration as an indexable insert simplifies tool changeover and inventory management: two usable edges per side increase uptime and lower tooling logistics. Backed by the manufacturing expertise of Tungaloy, this variant supports predictable tool life and consistent surface quality, making it suitable for series production and precise one-off tasks alike. For precise finishing on steel components, contact Metav Werkzeuge to specify the appropriate Tungaloy cermet insert and confirm holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and rapid availability. Technical data Article number: 6944636 Manufacturer SKU: TUN6944636 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: DNMG150612 Numeric data Cutting angle: 55° Corner radius: 1.2 mm Thickness: 6.35 mm Plate size: 15 mm Design & special features Uncoated cermet grade NS9530 Double-sided chipbreaker Rhombic plate form Cylindrical hole Intended application: turning, finishing of steel Compatibility determined by form, clearance, tolerance, fastening and plate size FAQ What materials is this insert suitable for? The DNMG150612 NS9530 insert is formulated as a finishing grade for steel; the NS9530 cermet provides surface quality and low cutting forces when used for finishing passes on steel components. How does the chipbreaker influence cutting stability? The double-sided chipbreaker on the Tungaloy insert promotes consistent chip formation and evacuation, which improves process stability and reduces the risk of built-up edge during continuous turning operations. Which geometry-related parameters must be considered when choosing a holder? Holder compatibility depends on plate form, clearance angle, tolerance class, fastening method, plate size and thickness; matching these with the DNMG150612 geometry ensures secure clamping and accurate run-out. Is the DNMG150612 suitable for small depth-of-cut finishing? Yes, the sharp cutting edge and NS9530 cermet composition make this insert particularly effective for small depth-of-cut finishing where high surface quality is required. How many cutting edges are available per insert and what is the SKU? This rhombic, double-sided indexable insert offers multiple usable edges per plate to extend service life; the article number is 6944636 and the manufacturer SKU is TUN6944636. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, ISO-compliant geometry and practical indexability for reliable turning operations. Order original Tungaloy turning inserts directly via Metav Werkzeuge or consult our technical team for application advice. DNMG 150612 NS9530 turning insert — Tungaloy (55° rhombic, cermet finishing) DNMG 150612 NS9530 is an ISO-format indexable turning insert designed for finishing steel in turning operations, offering a sharp uncoated cermet grade for low cutting forces and excellent surface quality DNMG 150612 ISO rhombic 55° geometry NS9530 uncoated cermet finishing grade Sharp cutting edge for low cutting forces Double-sided chipbreaker with cylindrical hole Consistent surface finish with a finishing-grade cermet The NS9530 grade is an uncoated cermet developed for finishing cuts in steel, delivering a sharp cutting edge and reduced built-up edge. For continuous cuts and small depths of cut, this composition lowers cutting forces and helps achieve a finer surface texture than typical carbide grades. The result is a measurable reduction in rework and fewer passes to reach tolerance, which supports a more predictable production flow and improved part quality. Predictable geometry and secure clamping for repeatable results The rhombic 55° geometry provides a stable cutting orientation for external and internal turning, while the 1.2 mm corner radius balances edge strength with the ability to produce fine contours. The insert is double-sided and features a cylindrical hole for positive seating in compatible holders; indexing the plate doubles the usable life per insert. Compatibility with a holder depends on form, relief angle, tolerance class, fastening, size and thickness, so matching the insert to the correct clamping system ensures predictable machining and reduced setup time. Process efficiency through sensible system integration This ISO-format insert is part of a system comprising the insert, an appropriate external holder or boring bar, a seating pad/clamp set and replacement screws. Selecting the correct chipbreaker and grade for the workpiece, machining mode and stability improves chip control and tool life. For finishing operations on steel, the uncoated cermet option reduces friction at the cutting edge, which supports consistent cycle times and may reduce the need for frequent tool changes—benefits that contribute directly to throughput and cost-efficiency. Application guidance and practical recommendations Intended primarily for turning steel in finishing regimes, the insert suits operations with small feeds and continuous cuts where surface quality is decisive. The plate’s ISO DNMG format allows easy integration into standard toolholding systems; the 0° relief angle and 6.35 mm plate thickness support secure clamping and stable cutting. Choose the double-sided chipbreaker and the NS9530 grade when prioritising surface integrity and low cutting forces under steady-cutting conditions. For original Tungaloy DNMG 150612 NS9530 turning inserts and tailored application support, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability Technical Data Article number: 6944591-Tungaloy Manufacturer article number: 6944591 SKU (manufacturer): TUN6944591 Label: DNMG150612 NS9530 Tungaloy-Insert Core specifications Geometry: rhombic, 55° Corner radius: 1.2 mm Relief angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Features and materials Series: ISO turning indexable inserts Grade: NS9530 (uncoated cermet) Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (finishing steel) Material reference: cemented carbide substrate FAQ What types of turning are suitable for this insert? The DNMG 150612 NS9530 turning insert is designed for external and internal turning in finishing operations, particularly continuous cuts on steel where surface quality is critical. Is the NS9530 grade coated or uncoated? The NS9530 grade used in the DNMG 150612 insert is an uncoated cermet, chosen for its sharp edge and low cutting forces during finishing. Can the insert be indexed to use both sides? Yes, the insert is double-sided with a cylindrical hole, allowing indexing to use the second cutting edge and thereby extend productivity per insert. Which workpiece materials are recommended? This insert is optimised for steel finishing; select the NS9530 grade and the appropriate chipbreaker for best results under small depths of cut and continuous cutting conditions. How does the geometry influence holder compatibility? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness—ensuring the holder matches these parameters secures correct seating and reliable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 NS9530 Wendeplatten - Tungaloy
Reliable finishing performance is achieved through the combination of the NS9530 uncoated cermet grade and a sharp cutting edge, delivering low cutting forces and a superior surface finish on Stahl components. The ISO geometry and 55° rhombic form ensure broad holder compatibility and stable clamping—order directly via Metav Werkzeuge or consult the technical team for application advice. DNMG 150612 NS9530 Tungaloy turning insert — ISO rhombic 55° finishing grade The DNMG150612 NS9530 is an ISO-standard rhombic indexable insert for turning, optimised as a finishing grade for Stahl with a sharp edge and low cutting-force design ISO DNMG 150612 geometry, 55° rhombic insert Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces Double-sided chipbreaker, with cylindrical hole High-quality finishing through low cutting forces and sharp edge This insert combines an uncoated cermet cutting material with a deliberately sharp cutting edge, producing low cutting forces that reduce tool-induced vibration and improve machinability during finishing passes. The result is a high surface finish on shafts and turned components in Stahl, even when using small depths of cut and continuous cutting conditions. The corner radius 1.2 mm offers a reliable edge form for consistent part geometry and reliable surface integrity across serial production runs. ISO compatibility and secure clamping for repeatable results Designed as part of an ISO series insert, the geometry is defined so that compatibility with external holders and boring bars is determined by form, relief angle, tolerance class, clamping method, size and thickness. The 55° rhombic shape and the cylindrical hole allow secure fixation with standard clamping sets and replacement screws; a stable mounting translates directly into repeatable cutting performance and predictable tool life. Where process stability is essential, the correct combination of insert geometry and a suitable holder will be decisive. Application guidance to boost productivity and surface quality As a finishing grade, this insert is intended primarily for continuous cuts and small feed/step-down strategies; select a chipbreaker and grade that match workpiece material and machining stability. The NS9530 grade is formulated to produce excellent surface quality on Stahl, making it appropriate for final passes where dimensional accuracy and finish are priorities. For mixed-production environments, the insert’s double-sided design increases effective utilisation, while the ISO-standard form supports fast index changes and straightforward inventory management. Contact Metav Werkzeuge for ordering genuine Tungaloy inserts or for detailed process recommendations — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: 6944662 SKU: 6944662-Tungaloy Manufacturer SKU: TUN6944662 Model series: ISO-Drehwendeschneidplatten Designation: DNMG150612 NS9530 Facts Angle: 55° Inscribed circle: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Special features Grade: NS9530 Cutting material: uncoated cermet Material base: cemented carbide body Hole: cylindrical hole Chipbreaker: double-sided Shape: rhombic Application: turning — finishing of Stahl ISO-standard insert, compatible with matching holders and shims FAQ What cutting operations is this insert best suited for? The DNMG150612 NS9530 insert is designed for finishing turning operations, where continuous cuts and small depths of cut are applied to achieve high surface quality on Stahl. Which materials can be machined with this grade? The NS9530 uncoated cermet grade is optimised for finishing applications in Stahl and delivers low cutting forces and excellent surface finish in those conditions. How many cutting edges are available per insert? The insert is double-sided with a rhombic form and offers multiple indexable edges before replacement is required. What are the key dimensional specifications to check for holder compatibility? Check the inscribed circle (15 mm), thickness (6.35 mm), corner radius 1.2 mm, relief angle and the presence of a cylindrical hole to ensure compatibility with the chosen holder. Is the insert supplied with a coating? This grade is an uncoated cermet; the NS9530 formulation is intended to provide a sharp edge and a high-quality finish without additional coating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp NS9530 cermet grade, precise 55° rhombic geometry, and secure ISO compatibility for reliable finishing operations; order the insert directly via Metav Werkzeuge or consult our specialists for selection support. DNMG150612 NS9530 Tungaloy indexable insert for turning — cermet finishing grade, 55° rhombic The DNMG150612 NS9530 is an ISO‑standard turning insert designed for finishing steel in continuous cuts, offering a low cutting force geometry and compatibility with common external holders and boring bars. DNMG150612 rhombic ISO insert, 55° cutting angle Uncoated cermet NS9530 for finishing steel 1.2 mm corner radius for superior surface finish Double-sided chipbreaker, with cylindrical hole Consistent finishing with low cutting forces The insert combines an uncoated cermet composition with the NS9530 grade to deliver stable, sharp cutting edges that are tailored for fine finishing on steel. Cermet materials offer reduced built‑up edge and improved wear behaviour at the cutting edge compared with some coated grades; this means a smoother surface on the workpiece and more predictable tool life during continuous turning. The low cutting forces inherent to the geometry reduce spindle load and can contribute to fewer re‑passes and less downstream polishing. Predictable fit and secure clamping for stable turning Compliance with ISO norms ensures the plate mates predictably with ISO‑specified holders; compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The centrally placed, cylindrical hole and standard mounting interface support secure fixation in a matching seat and allow reliable repeatability when changing inserts. For workshop planners and production engineers, this means consistent part quality and fast insert exchange without costly adjustments. Geometry engineered for surface quality and small depths of cut The rhombic plate form with a 55° principal cutting angle, a 1.2 mm corner radius and a 6.35 mm thickness delivers a balance between edge strength and a fine contact geometry that is ideal for small depths of cut and continuous cuts. The double‑sided chipbreaker contributes to controlled chip formation and evacuation, which supports uninterrupted runs and reduces the risk of surface damage. In short, the geometry is optimised to produce excellent surface finishes while maintaining efficient material removal for finishing passes. System integration and application guidance for process reliability This insert is intended for turning applications, including external and internal operations, and forms part of a system comprising the ISO insert, a suitable external holder or boring bar, a shim or clamp set and replacement screws. Selection of the correct chipbreaker and grade should match the workpiece material and machining conditions; the NS9530 finishing sort is especially suited to steel when a sharp edge and low cutting forces are required. For process engineers planning tool layouts, the insert offers repeatable performance that supports predictable cycle times and consistent component quality. For tailored advice on integrating the DNMG150612 NS9530 Tungaloy insert into an existing tool setup, or to request technical specifications and availability, contact Metav Werkzeuge for direct support and ordering assistance. Technical data Article number: 6944611 Manufacturer SKU: TUN6944611 Stock SKU: 6944611-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150612 NS9530 Tungaloy-Wendeplatte Numbers / Core technical data Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 55° Clearance (relief) angle: 0° Designs / Special features Uncoated cermet grade NS9530 Rhombic plate form Double-sided chipbreaker Cylindrical hole for secure clamping Intended application: turning (external and internal) Finishing sort for steel; sharp cutting edge and low cutting forces FAQ What materials is this insert intended for? The DNMG150612 NS9530 insert is specified as a finishing sort for steel; the NS9530 cermet composition and sharp edge geometry favour continuous cuts on steel workpieces. Can this insert be used for internal turning? Yes, the ISO‑standard shape and secure clamping make the insert suitable for both external and internal turning applications when paired with an appropriate boring bar or holder. How does the 1.2 mm corner radius affect the surface finish? A 1.2 mm corner radius provides a favourable contact geometry for finishing, helping to produce a superior surface finish while maintaining sufficient edge strength for small depths of cut. Is the insert reversible or single‑use? This plate is double‑sided with a double‑sided chipbreaker, allowing it to be indexed to a fresh edge as defined by the ISO geometry until all usable edges are consumed. What should be checked when selecting a compatible holder? Compatibility depends on the plate form, clearance angle, tolerance class, clamping method, size and thickness; ensure the holder matches the ISO DNMG seat and provides correct support for the 6.35 mm thickness and cylindrical hole. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T505 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T505 and the ISO DNMG geometry to secure efficient, reproducible turning of cast iron components; the confident chip control and 55° cutting angle keep cycle times predictable. Order the insert via Metav Werkzeuge or ask the consultants for compatibility checks and fast delivery. DNMG 150612 T505 turning insert – Tungaloy The DNMG150612 T505 is an ISO-standard indexable turning insert engineered for economical and stable machining of cast iron in general turning applications. CVD-coated carbide grade T505 for cast iron 55° rhombic geometry for stable cutting 1.2 mm corner radius for robust edge strength Cylindrical hole, 6.35 mm thickness for secure clamping Increase productivity with a grade built for cast iron The combination of CVD-coated carbide and the T505 grade is optimised for the economical machining of cast iron, delivering a balance of wear resistance and edge toughness. The coating minimises built-up edge and adhesive wear during interrupted cuts, while the substrate offers fracture resistance—resulting in longer effective tool life and fewer tool changes. For production environments where cycle time and predictable tool behaviour matter, this insert supports consistent throughput and reduced process variation. Reliable chip control and surface quality on the workpiece Equipped with a double-sided chipbreaker, the insert promotes controlled chip formation across common cast-iron grades. Controlled chips reduce the risk of entanglement and improve surface finish, so finishing passes are more predictable and less reliant on manual rework. The 55° rhombic geometry helps maintain a low cutting force direction, which contributes to dimensional stability of the turned part and reduces the load on the machine spindle. Designed for secure clamping and easy integration The ISO DNMG form and the cylindrical central hole ensure compatibility with standard external toolholders and boring bars when the holder matches form, clearance angle and tolerance class. A plate thickness of 6.35 mm and the 1.2 mm corner radius give mechanical robustness in less rigid set-ups; this reduces the chance of edge chipping during light interruptions or unstable clamping conditions. The insert is reversible, allowing both sides to be used for economical indexable performance. Practical advantages that lower overall tooling cost Selecting the T505 grade for cast iron workpieces reduces the frequency of insert replacements and keeps machine uptime high. The insert’s construction supports higher feed rates where the process is stable, enabling faster material removal rates and better cost per part. For workshops aiming to streamline operations, the combination of geometric stability and an application-optimised grade translates into measurable savings over longer runs. For reliable cast iron turning using Tungaloy's DNMG150612 T505 insert, contact Metav Werkzeuge for tailored holder compatibility advice and prompt supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6831242 Manufacturer SKU: TUN6831242 Item SKU: 6831242-Tungaloy Facts Insert designation: DNMG150612 Corner radius: 1.2 mm Included angle: 55° Thickness: 6.35 mm Size: 15 mm Special features Material: carbide Coating: CVD Grade: T505 Shape: rhombic Hole style: cylindrical hole Chipbreaker: double-sided Application: turning, cast iron machining FAQ What materials is this insert suitable for? This DNMG150612 T505 insert from Tungaloy is designed primarily for economical machining of cast iron and performs best when matched to the appropriate chipbreaker and cutting conditions. How does the T505 grade influence performance? The T505 grade provides a CVD-coated carbide surface with a substrate tuned for wear resistance and edge strength, giving stable tool life during continuous and interrupted turning of cast iron. Is the insert reversible and how many cutting edges are available? The rhombic DNMG plate is double-sided; each side can be indexed to present a fresh cutting edge, extending the usable life compared with single-edged designs. What holder compatibility should be checked before ordering? Compatibility depends on the insert form, clearance angle (0°), tolerance class, fixing method and plate thickness; confirm the holder accepts DNMG 150612 geometry and a 6.35 mm thick plate. Can this insert cope with interrupted cuts? Yes—the carbide substrate and the chosen chipbreaker make the insert suitable for interrupted cutting typical in cast iron work, provided cutting parameters and clamping stability are adequate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T5105 Wendeplatten - Tungaloy
Benefit from the CVD‑coated T5105 grade and the ISO DNMG geometry for productive high‑speed turning with reliable chip control; order the DNMG150612 T5105 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150612 T5105 DNMG indexable turning insert for turning (Tungaloy) The DNMG150612 T5105 indexable insert is engineered as an ISO‑format turning insert for high‑speed finishing of cast iron under stable machining conditions, offering a balanced combination of wear resistance and predictable cutting behaviour. CVD-coated carbide T5105 grade DNMG format (ISO 150612), turning insert 1.2 mm nose radius for reliable edge life Double-sided chipbreaker; cylindrical hole Increased productivity through high‑speed, wear‑resistant cutting The insert’s CVD coating and T5105 carbide base deliver enhanced wear resistance that supports higher cutting speeds and longer tool life under consistent conditions. This results in fewer indexings and less downtime, which improves overall process efficiency. The rhombic DNMG form factor in the ISO 150612 family provides a familiar geometry for many external and internal turning tasks, allowing predictable engagement angles and stable cutting forces. For production environments where cycle time and repeatability matter, the durable coating and robust substrate translate directly into lower unit machining costs and steadier surface finishes. Predictable chip control and edge security for cast iron turning Equipped with a double-sided chipbreaker and a cylindrical mounting hole, the insert promotes orderly chip formation and secure clamping in compatible holders. The chipbreaker design is tuned for the grade and typical cutting parameters, which helps avoid entangling or long stringy chips during finishing cuts on cast iron. The 1.2 mm nose radius supports a good compromise between edge strength and fine surface quality, reducing the risk of edge chipping while maintaining dimensional accuracy. Operators and process planners can therefore rely on consistent results when using this insert in appropriately rigid setups. Compatibility, clamping and holder selection explained The ISO designation, plate size and the presence of a central cylindrical hole determine fitment: ensure the selected DNMG‑compatible external holder or boring bar matches the plate form, free‑rake angle and tolerance class. The insert thickness of 6.35 mm and the 15 mm plate size are standard parameters to check against the toolholder pocket and clamping parts. For retrofit or mixed‑fleet toolrooms, matching the ISO 150612 format simplifies inventory and reduces the need for multiple holder types. When in doubt about holder choice or optimal cutting data, technical consultation is recommended to maximise the benefit of the grade and geometry. For high‑speed turning of cast iron, request the Tungaloy DNMG150612 T5105 insert from Metav Werkzeuge and discuss recommended machining parameters with our specialists at Metav Werkzeuge Technical data Article number: 6850236 SKU: 6850236-Tungaloy Manufacturer SKU: TUN6850236 Model series: ISO-Drehwendeschneidplatten Designation: DNMG150612 Shape: rhombic Core data Nose radius: 1.2 mm Plate size: 15 mm Plate thickness: 6.35 mm Free angle: 0° Insert angle: 55° Features Material: carbide Coating: CVD-coated Grade: T5105 Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Application: turning Typical use: high-speed machining of cast iron under stable conditions FAQ What materials is this insert suited for? The DNMG150612 T5105 insert is formulated for cast iron machining and is optimised for high‑speed finishing where stable setups are used. How should the insert be clamped in a toolholder? Use a DNMG‑compatible external holder or boring bar sized for ISO 150612 plates; the cylindrical hole and standard thickness (6.35 mm) ensure correct seating and secure clamping when matched to the correct pocket and clamping set. Can this insert be used for roughing operations? The T5105 grade emphasises wear resistance for finishing and high‑speed cuts; for heavy roughing, a more robust edge preparation or a grade designed for interrupted cuts may be preferable. How does the chipbreaker affect surface finish? The double‑sided chipbreaker is designed to produce stable, segmented chips and to support consistent surface quality during finishing cuts on cast iron when cutting parameters are within recommended ranges. Is the DNMG150612 compatible with other ISO‑standard holders? Yes, the ISO 150612 designation means the insert fits holders manufactured to the same ISO geometry, provided form, free‑rake angle and tolerance class are compatible Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T5105 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide, a 1.2 mm corner radius and ISO compatibility for stable, high-speed turning; order the insert directly via Metav Werkzeuge or consult the technical team for application support. DNMG 150612 T5105 Turning insert by Tungaloy — CVD-coated carbide for cast iron turning The DNMG150612 T5105 is an ISO-standard rhombic turning insert designed for stable external and internal turning, optimised for high-speed machining of cast iron under steady conditions. CVD-coated carbide for high-speed cutting Optimised for cast iron machining Rhombic 55° geometry with 1.2 mm corner radius Cylindrical hole — secure mounting Consistent cutting performance for high-speed turning The insert’s CVD-coated carbide grade T5105 is developed for high-speed machining of cast iron, providing wear resistance and predictable tool life during continuous production. The chemical vapour deposition layer increases abrasion resistance and thermal stability, which reduces flank wear at elevated cutting speeds. This leads to longer intervals between indexings and fewer tool changes, improving overall process efficiency. The outcome is reduced machine downtime and a more reliable production rhythm when stability in setup and cutting conditions is maintained. ISO compatibility and secure clamping reduce integration effort As an ISO-standard plate with defined form and tolerance, the insert integrates into standard toolholding systems with minimal adaptation. The rhombic 55° geometry and a cylindrical hole allow secure mounting on compatible external holders or boring bars, while the specified clearance angle and plate thickness contribute to assembly accuracy. A complete system comprises the ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws; correct selection of these components ensures repeatable positioning and reduces vibration-related wear. Predictable chip control and improved surface finish The double-sided chipbreaker provides consistent chip formation, supporting stable cutting at higher feed rates and aiding swarf evacuation. The 1.2 mm corner radius balances edge strength and the ability to produce a smooth surface finish in semi-finish to finishing passes. A plate thickness of 6.35 mm contributes to rigidity, decreasing chatter risk and enabling more aggressive but controlled cutting conditions where the workpiece and setup provide adequate support. The result is reliable part geometry and a reproducible surface quality during series production. For application guidance or stock enquiries about Tungaloy CVD-coated inserts, contact Metav Werkzeuge—technical consultants are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6850238 Manufacturer SKU: TUN6850238 Stock SKU: 6850238-Tungaloy Series: ISO turning indexable inserts Designation: DNMG150612 T5105 Facts Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 15 mm Clearance angle: 0° Geometry angle: 55° Hole: with hole Special features Material: carbide Coating: CVD (T5105) Shape: rhombic Chipbreaker: double-sided Hole style: cylindrical hole Application: turning Compatibility: ISO holders and boring bars FAQ What materials is this insert best suited for? The DNMG150612 T5105 insert from Tungaloy is optimised for machining cast iron, where its CVD-coated carbide composition offers strong wear resistance under high-speed conditions. Can the DNMG150612 be used for internal turning as well as external turning? Yes, the ISO-standard geometry and secure cylindrical hole mounting make the insert suitable for both external and internal turning when paired with the appropriate holder or boring bar. How does the 1.2 mm corner radius affect cutting performance? A 1.2 mm corner radius increases edge strength and contributes to a better surface finish on semi-finish and finishing passes, while also supporting stable cutting in repetitive production. Is the insert reversible or indexable? The DNMG150612 is a double-sided indexable insert, allowing multiple cutting edges to be used before replacement, which extends effective tool life. Which toolholder features are required for correct assembly? Correct assembly requires a holder compatible with ISO DNMG geometry, suitable clearance for the 0° relief angle, and a secure clamping system; matching the plate size and thickness ensures accurate seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T5105 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide, 55° rhombic geometry and a double-sided chipbreaker for reliable, high-speed turning of cast iron; order the DNMG150612 T5105 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150612 T5105 Tungaloy — ISO indexable turning insert for high-speed cast iron turning The DNMG150612 T5105 is an ISO-standard indexable turning insert engineered for high-speed external and internal turning of cast iron under stable machining conditions. CVD-coated carbide T5105 Optimised for cast iron machining 55° rhombic geometry with cylindrical hole Double-sided chipbreaker for stable cuts Consistent high-speed performance for cast iron work The core advantage of this insert lies in its CVD-coated carbide composition and the T5105 grade, which together provide wear resistance and thermal stability during high cutting speeds. The combination of coating and substrate reduces flank wear and extends edge life, which translates into fewer indexings and longer tool cycles in series production. For operations where cycle time and repeatable surface quality matter, the indexable insert design permits quick replacement and reliable geometry retention, supporting uninterrupted production runs and predictable tool-change planning. Geometry and chip control that reduce cycle time The 55° rhombic geometry with a double-sided chipbreaker supports controlled chip formation and evacuation when turning cast iron. The rhombic shape offers access to both external and internal features, while the chipbreaker design reduces vibration and improves surface finish under steady, clamped conditions. The insert’s cylindrical hole and standardised ISO form ensure secure clamping in matching toolholders; combined with the correct pad and clamp set, the system provides consistent seat repeatability and minimal runout for precision turning. System compatibility and secure mounting for repeatable results Compatibility with holders is determined by form, relief angle, tolerance class, fastening, size and thickness; the insert’s 6.35 mm thickness and 15 mm size comply with common ISO clamping systems. The recommended system build comprises the ISO indexable insert, a matching external holder or boring bar, a support pad/clamp set and replacement screws to guarantee correct torque and seating. This structured approach ensures reliable force transmission, repeatable positioning and reduced risk of loosening during heavy cuts, which is critical for keeping rejects and machine downtime to a minimum. Durability, economical cutting and predictable outcomes With the T5105 carbide grade and CVD coating, the insert is designed to offer good wear resistance and stable edge life when operated within its intended envelope. The geometry and grade selection help to achieve consistent surface quality and reduced tool consumption in long production runs. For machining strategies that prioritise throughput and reproducibility, this insert provides an effective balance of cost-efficiency and process stability. Contact Metav Werkzeuge today to discuss holder matching and to secure DNMG150612 T5105 stock for your next production batch — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6850241 Manufacturer SKU: TUN6850241 Model series: ISO-Drehwendeschneidplatten Material: Carbide Application: Turning Facts Radius: 1.2 mm Included angle: 55° Thickness: 6.35 mm Size: 15 Relief angle: 0° Hole: with cylindrical hole Special features Coating: CVD-coated Grade: T5105 Chipbreaker: double-sided Plate form: rhombic Use case: high-speed machining of cast iron under stable conditions System components: insert, holder/boring bar, support pad/clamp set, replacement screws FAQ What materials is this insert suited for? The DNMG150612 T5105 insert is optimised for machining cast iron; the CVD-coated carbide composition supports high-speed turning under stable cutting conditions. How is the insert secured in the holder? Secure clamping is achieved with a matching ISO holder, a support pad or clamping set and the correct replacement screws as described in the system build; the DNMG150612’s cylindrical hole facilitates reliable seating. Can this insert be used for internal turning? Yes, the rhombic form and 55° geometry allow both external and internal turning operations when paired with an appropriate boring bar or internal holder. What benefits does the T5105 grade deliver? The T5105 grade provides wear resistance and thermal stability for high-speed applications, offering longer edge life and consistent surface finish compared with uncoated substrates. Which features improve chip control during cast iron turning? The double-sided chipbreaker combined with the insert geometry controls chip formation and evacuation, reducing vibration and supporting improved surface quality in continuous production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T5115 Wendeplatten - Tungaloy
DNMG 150612 T5115 – Wendeplatte für Drehen · Tungaloy DNMG150612 T5115 ist eine ISO-genormte Wendeplatte für Außen- und Innendrehen, entwickelt als Universallösung für die wirtschaftliche Bearbeitung von Gusseisen. CVD-beschichtetes Hartmetall für lange Standzeit Geeignet für Außen- und Innendrehen mit rhombischer Geometrie Doppelseitiger Spanbrecher für stabile Spanbildung Rhombische Platte 55°: gute Einspanneigenschaften Mit zylindrischem Loch: einfache Befestigung Hohe Verschleißfestigkeit durch CVD-Beschichtung Die Wendeplatte basiert auf Hartmetall mit CVD-Beschichtung der Sorte T5115, die ein ausgewogenes Verhältnis aus Verschleißfestigkeit und Schneidkantenstabilität bietet. Durch die CVD-Technologie entsteht eine harte, temperaturbeständige Schicht, die vor Mikroausbrüchen schützt und die Standzeit erhöht. Für Anwender bedeutet das weniger Rüst- und Werkzeugwechsel und eine erhöhte Fertigungsleistung bei gleichbleibender Werkstückqualität. Passgenauigkeit und Werkzeugkompatibilität für stabile Prozesse Dank der ISO‑Normierung lässt sich die Platte einfach in passende Halter und Bohrstangen einbauen; die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die rhombische Form mit 55° Winkel und Freiwinkel 0° sorgt für zuverlässige Einspanneigenschaften, während das zylindrische Loch die Fixierung vereinfacht. Durch den doppelseitigen Spanbrecher bleibt die Spanform bei wechselnden Schnittbedingungen kontrolliert. Produktivität und Prozesssicherheit in der Zerspanung Die Sorte T5115 ist als Universalsorte für Gusseisen ausgelegt und unterstützt eine produktive Zerspanung mit stabiler Schneidkante. In der Serienfertigung führt das zu konstanteren Losgrößen, gleichmäßiger Oberflächengüte und reduzierten Stillstandzeiten. Anwender profitieren von einer guten Spanabfuhr und von der Fähigkeit der Platte, unterschiedliche Gussqualitäten wirtschaftlich zu bearbeiten. Anwenderprofil und Praxishinweise Die Platte eignet sich besonders für mechanische Werkstätten, Serienfertiger und Instandhaltungsbetriebe, die robuste Optionen für das Drehen von Gusseisen benötigen. Bei der Auswahl des passenden Spanbrechers und der Schnittdaten sollten Spanformer, Werkstückmasse und Halterstabilität berücksichtigt werden. Bei Unsicherheit bietet der technische Vertrieb zusätzliche Anwendungsempfehlungen und Unterstützung bei der Sortenwahl. Empfehlung: Für eine zuverlässige und wirtschaftliche Zerspanung die Tungaloy DNMG 150612 T5115 Wendeplatte einsetzen; technische Beratung und Bestellung über Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6850239 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: DNMG150612 Hersteller SKU: TUN6850239 Fakten Eckenradius: 1,2 mm Plattendicke: 6,35 mm Plattengröße: 15 mm Winkel: 55° Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: T5115 Schneidstofftyp: CVD-beschichtetes Hartmetall Plattenform: rhombisch Loch: mit Loch (zylindrisches Loch) Spanbrecher: doppelseitig Anwendung: Drehen CVD: chemische Gasphasenabscheidung FAQ Welche Werkstoffe bearbeitet die Platte vorrangig? Die DNMG150612 T5115 Wendeplatte von Tungaloy ist als Universalsorte speziell für Gusseisen ausgelegt und bietet eine ausgewogene Kombination aus Verschleißfestigkeit und Schneidkantenstabilität. Welche Vorteile bringt die CVD-Beschichtung der T5115? Die CVD-Beschichtung der T5115 erhöht die Oberflächenhärte und Temperaturbeständigkeit, was zu längerer Standzeit, stabiler Schneidkante und verbesserten Ergebnissen beim Drehen führt. Wie erkennt man die Kompatibilität mit dem Halter? Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke ab; die DNMG150612 entspricht gängigen ISO‑Maßen für rhombische Einsätze. Ist die Platte für Innen- und Außendrehen geeignet? Ja, die DNMG150612 T5115 ist für Außen- und Innendrehen geeignet und bietet durch die rhombische Geometrie und den doppelseitigen Spanbrecher flexible Einsatzmöglichkeiten. Welche Befestigungsart wird verwendet? Die Platte verfügt über ein zylindrisches Loch zur Befestigung, das eine sichere Montage in entsprechenden Haltern erlaubt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 150612 T5115 Wendeplatten - Tungaloy
Combining CVD-coated carbide wear resistance with a 1.2 mm corner radius for reliable edge stability makes this insert a productive choice for cast‑iron turning; order the DNMG150612 directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150612 T5115 — ISO turning indexable insert for turning, Tungaloy DNMG150612 T5115 Tungaloy turning insert designed for versatile external and internal turning applications in cast iron and similar materials DNMG shape ISO 55° rhombic geometry CVD-coated carbide grade T5115 1.2 mm corner radius for robust edge Double-sided chipbreaker, with cylindrical hole Consistent chip control optimised for cast‑iron turning The DNMG150612 insert is engineered for predictable chip formation during turning of cast iron. The double-sided chipbreaker geometry reduces the risk of long, stringy chips and supports stable cutting forces, which in turn lowers the likelihood of chatter and tool damage. The combination of the T5115 CVD coating and the substrate hardness enables a balance between wear resistance and edge strength, so cycle times remain reliable even in demanding short‑to‑medium cutting operations. For production environments where repeatability matters, this geometry helps maintain surface finish targets while simplifying chip evacuation. Edge security and productivity through material and geometry A CVD‑coated carbide grade like T5115 provides elevated resistance to abrasive wear while preserving a tough cutting edge; this translates into longer intervals between index changes and more predictable tool life. The 1.2 mm corner radius increases edge strength and permits modest depth‑of‑cut increases without compromising surface quality. With a 55° approach angle and 0° relief, the insert promotes stable cutting conditions on typical external and internal turning set‑ups, enabling improved material removal rates and consistent part tolerances. These tangible benefits support a reduction in downtime and contribute to overall process efficiency. ISO conformity and simple integration for efficient set‑up As an ISO‑standard indexable insert, compatibility with holders is determined by form, clearance, tolerance class, fastening and thickness. The DNMG profile and rhombic format offer predictable seating in standard external holders or boring bars; the cylindrical hole supports secure clamping and accurate indexing. The insert’s 6.35 mm thickness and 15 mm size provide mechanical stability in less rigid setups, while the double‑sided design permits economical reverse indexing. Clear identification of the insert designation and grade simplifies tooling planning and spare‑part management on the shop floor. For reliable cast‑iron turning with Tungaloy's T5115 grade, contact Metav Werkzeuge for ordering or tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852981 Manufacturer SKU: TUN6852981 SKU: 6852981-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Dimensions / Core data Insert designation: DNMG150612 Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Approach angle: 55° Relief angle: 0° Design and special features Rhombic geometry (DNMG) with cylindrical hole CVD-coated grade T5115 Double-sided chipbreaker For external and internal turning ISO-compliant indexable insert FAQ Which materials is this insert suited for? The Tungaloy DNMG150612 T5115 insert is optimised for cast iron machining; the T5115 CVD-coated carbide grade provides a balance of wear resistance and edge toughness suitable for typical cast‑iron applications. How does the chipbreaker affect machining? The double-sided chipbreaker on this indexable insert shapes chips for safer evacuation and steadier cutting forces, improving surface finish and reducing the likelihood of chip‑related interruptions. Is the insert reversible and economically efficient? Yes, the insert is double‑sided and indexable; after one edge is worn, rotation to the second edge extends service life and lowers replacement frequency for the DNMG150612 T5115 turning insert. What should be considered for holder compatibility? Compatibility is determined by the insert form, approach angle, tolerance class, fastening method, size and thickness; ensure the selected holder matches the DNMG profile and the 6.35 mm thickness for proper seating and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150612 T5115 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide and a double-sided chipbreaker for consistent edge life and secure chip control; the 55° rhombic geometry with a 1.2 mm corner radius delivers versatile turning performance for cast-iron work. Order directly via Metav Werkzeuge or contact the technical team for application advice. DNMG 150612 T5115 ISO turning insert by Tungaloy — CVD-coated carbide, 55° rhombic DNMG150612 T5115 is an ISO-standard turning insert designed for external and internal turning, optimised for cast-iron machining and general-purpose applications CVD-coated carbide for wear resistance Universal grade T5115 for cast iron Double-sided chipbreaker for stable chips 55° rhombic shape, 1.2 mm corner radius Consistent cutting performance for turning operations The insert combines a CVD-coated carbide substrate and the universal T5115 grade to balance wear resistance with edge stability, providing reliable tool life in continuous and intermittent cuts. This configuration reduces unplanned tool changes and helps to maintain cycle times, which is particularly beneficial in production environments where predictable performance supports throughput. The design supports both external and internal turning, delivering measurable gains in process efficiency when paired with the correct holder and cutting data. Controlled chips and improved process stability Equipped with a double-sided chipbreaker, the insert actively shapes and evacuates chips to reduce the risk of entanglement and surface damage. Chip control is essential when machining cast iron, as consistent chip formation avoids tool nose contact and keeps cutting forces steady; this leads to improved surface quality and reduced vibration. The chipbreaker geometry is chosen to match workpiece material, feed and depth of cut, so the result is a more stable machining process and fewer interruptions for cleaning or part rework. Straightforward integration with ISO tooling systems The ISO designation and the geometrical data ensure compatibility across common toolholders, but correct matching is critical: holder fit depends on form, relief angle, tolerance class, clamping method, size and thickness. The insert’s 0° relief angle, 55° rhombic form and cylindrical hole are suited to standard screw clamping in external holders and boring bars; a complete system typically comprises the indexable insert, an appropriate external holder or boring bar, a shim/clamp set and replacement screws. Choosing the correct combination simplifies setup and reduces downtime during insert changes. Suitable materials and cost-effective machining Specifically formulated as a universal grade for cast iron, the cutting grade offers an even distribution of wear resistance and chipping resistance, making it a practical choice for shops handling a mix of cast-iron components. The 1.2 mm corner radius supports moderate feeds while preserving part geometry, and the insert’s reversible double-sided layout extends usable life per part. Overall, the configuration promotes economical cutting by lowering tooling consumption and keeping machine uptime high. For dependable cast-iron turning with Tungaloy quality, choose the DNMG 150612 T5115 and contact Metav Werkzeuge for tailored technical advice and supply via info@metav-werkzeuge.com or by phone Technical data Article number: 6850237 SKU: 6850237-Tungaloy Manufacturer SKU: TUN6850237 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 1.2 mm Included angle: 55° Thickness: 6.35 mm Insert size: 15 mm Relief angle: 0° Special features Material: carbide Grade: T5115 Coating: CVD-coated Chipbreaker: double-sided Hole: cylindrical hole Shape: rhombic (55°) Application: turning (external and internal) Compatibility: suitable for external holders and boring bars System components: shim/clamp set and replacement screws FAQ Which materials is this insert suited for? The DNMG150612 T5115 is formulated as a universal grade for cast iron; its CVD-coated carbide construction also handles a range of grey and nodular irons with consistent edge life. How does the chipbreaker affect machining? A double-sided chipbreaker provides controlled chip formation and evacuation, which stabilises forces and improves surface finish during turning operations. What holders or clamping methods are compatible with this insert? Compatibility is determined by geometry and fastening: the insert’s rhombic form, cylindrical hole and dimensions suit standard screw-clamped external holders and boring bars designed for ISO inserts. Is the insert indexable and reversible? Yes, the insert is double-sided and indexable, allowing rotation or reversal to use a fresh cutting edge and extend overall tool life. What are the key dimensions to check when selecting this insert? Important values to confirm are the ISO designation DNMG150612, thickness 6.35 mm, insert size 15 mm, corner radius 1.2 mm and the 55° included angle. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T5125 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T5125 grade and the rhombic DNMG150612 geometry for stable chip control and long tool life; the insert’s toughness in interrupted cuts supports continuous production and lower tooling costs. Order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. DNMG150612 T5125 DNMG turning insert for turning – Tungaloy DNMG150612 T5125 is an ISO-standard rhombic turning insert engineered for interrupted cuts and less stable machining conditions, offering a robust carbide substrate with a CVD coating. CVD-coated carbide grade T5125 Designed for interrupted cuts in cast iron Rhombic ISO insert, 55° cutting angle Double-sided chipbreaker, with cylindrical hole Reliable performance in unstable cutting conditions The T5125 grade combines a tough carbide substrate with a CVD-coated surface to resist chipping under interrupted cutting cycles. This combination reduces flank wear and preserves edge integrity, which translates into fewer insert changes and more consistent component quality. The geometry of the rhombic form promotes stable chip formation when machining cast iron, and the insert’s toughness is optimised for operations where rigidity or tool support may vary. Such material- and geometry-focused design supports predictable tool life and less unplanned downtime. ISO compatibility and quick mounting for consistent setups As an ISO-compliant rhombic insert with a 55° cutting angle and a 0° clearance angle, the DNMG150612 fits a wide range of standard turning holders. Compatibility depends on shape, clearance angle, tolerance, fastening and thickness; the insert’s 6.35 mm thickness and cylindrical hole allow secure clamping and repeatable positioning. Choosing the correct holder and shim ensures correct tool overhang and rigidity, reducing vibration and improving surface finish. Clear identification and standard dimensions simplify inventory management in multi-machine environments. Productivity gains through design and system integration The double-sided design with a double-sided chipbreaker and a 1.2 mm corner radius provides a balanced mix of strength and versatility for both interrupted passes and steady cuts. Using this insert as part of a complete system — insert, matched holder, shim/clamp set and spare screws — enables quick changeovers and consistent set-ups across shifts. The chipbreaker and grade combination is tailored to deliver efficient material removal with controlled chips, lowering cycle times and improving process reliability. Specifying the correct chipbreaker for the workpiece material enhances surface quality and tool life. Contact Metav Werkzeuge for tailored application advice on Tungaloy T5125 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for recommendations and availability Technical data Article number: 6850240 Manufacturer SKU: TUN6850240 Product SKU: 6850240-Tungaloy Grade: T5125 Material: carbide Key dimensions / performance Cutting angle: 55° Corner radius: 1.2 mm Insert size: 15 mm Thickness: 6.35 mm Clearance angle: 0° Design / special features Rhombic form (DNMG) Cylindrical hole for screw clamp Double-sided chipbreaker CVD-coated grade for toughness ISO-standard turning insert Intended for turning (interrupted cuts, cast iron) FAQ What materials is the DNMG150612 T5125 best suited for? The DNMG150612 T5125 insert is formulated for machining cast iron in interrupted cutting conditions, where its tough, CVD-coated carbide substrate offers enhanced resistance to chipping. How does the CVD coating benefit tool life? The CVD-coated surface on the T5125 grade reduces abrasive wear and protects the carbide core, extending the insert service life and improving process stability for the Tungaloy turning insert SKU 6850240-Tungaloy. Can this insert be used in standard ISO holders? Yes. The DNMG150612 conforms to ISO dimensions and fits holders designed for DNMG inserts; correct clamping and matching shim thickness ensure repeatable positioning. What system components are recommended for best results? A matched holder, appropriate shim/clamp set and correct fastening screws complete the system for reliable performance with the DNMG150612 T5125 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T5125 Wendeplatten - Tungaloy
High toughness from the T5125 grade and a CVD‑coated carbide substrate provide reliable performance when machining cast iron and interrupted cuts, while the ISO form and secure fastening ensure consistent seating in standard holders; order the DNMG150612 T5125 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150612 T5125 — DNMG turning insert (ISO 150612), CVD‑coated carbide for turning — Tungaloy DNMG150612 T5125 is an ISO‑standard indexable insert for general turning, engineered for stable performance in cast iron and for operations with interrupted cuts CVD‑coated carbide grade T5125 Optimised for cast iron and interrupted cuts Double‑sided chipbreaker for consistent chips 55° rhombic geometry with 1.2 mm corner radius Consistent edge life for interrupted turning The combination of a CVD‑coated surface and a tougher substrate in the T5125 grade delivers enhanced resistance to chipping in discontinuous cuts. This makes the insert particularly suitable for operations where the cut is repeatedly broken or when component rigidity is limited. The carbide substrate provides a stable cutting edge and, together with the coating, reduces flank wear, resulting in longer in‑service life and fewer indexings — a measurable gain in uptime and process stability. Geometry and chip control for a better surface finish The 55° rhombic shape and 1.2 mm corner radius balance tool strength with accessibility for a wide range of turning tasks. The double‑sided chipbreaker is designed to produce manageable chips and reduce the risk of built‑up edge, which helps maintain surface quality on the workpiece. Because the insert is reversible, the effective cutting cost per edge is reduced. The presence of a cylindrical hole and standard clamping geometry ensures reliable seating and repeatable orientation in compatible holders, supporting consistent program results. Easy integration into ISO tool systems and practical handling Being an ISO insert in the DNMG150612 format, the part fits a broad selection of external holders and boring bars when the form, relief angle, tolerance class, fastening method, size and thickness match. The 6.35 mm plate thickness and 15 mm size offer robust support in the pocket, while the double‑sided design provides economical edge usage. Selection of the correct chipbreaker and grade allows adaptation to workpiece material and machining stability, translating technical data into tangible production benefits such as reduced set‑up frequency and predictable tool change intervals. Contact Metav Werkzeuge for availability and precise advice on selecting the Tungaloy DNMG150612 T5125 indexable insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6852982 SKU: 6852982-Tungaloy Manufacturer SKU: TUN6852982 Model series: ISO turning indexable inserts Core data Corner radius: 1.2 mm Relief angle: 0° Included angle: 55° Plate thickness: 6.35 mm Plate size: 15 mm Special features Coating: CVD Grade: T5125 Substrate: carbide Application: Turning Suitable for: cast iron Chipbreaker: double‑sided Hole: cylindrical hole Plate form: rhombic FAQ What materials is this insert suitable for? The DNMG150612 T5125 insert is specified for machining cast iron; the T5125 grade and the CVD coating are chosen for interrupted cuts and less stable conditions. How does the coating affect tool life? The CVD‑coated carbide surface on the T5125 insert improves thermal and abrasive resistance, which extends edge life during continuous and intermittent turning. Is the insert reversible and how many cutting edges are available? The DNMG150612 is a double‑sided, rhombic indexable insert; each side provides usable cutting edges, allowing economical rotation and multiple edge usage. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s pocket form, relief angle, tolerance class, fastening method, plate size and thickness; the ISO DNMG150612 format is widely supported by standard external holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150612 T515 Wendeplatten - Tungaloy
Benefit from the CVD‑coated cemented carbide T515 and the ISO‑compliant DNMG geometry for reliable, economical cast iron turning; the double‑sided chipbreaker and secure cylindrical‑hole fixing support consistent chip control and extended indexable life. Order directly via Metav Werkzeuge or consult our specialists for process optimisation. DNMG150612 T515 Turning insert by Tungaloy — CVD‑coated cemented carbide, 55° The DNMG150612 T515 is an ISO‑standard rhombic indexable insert designed for external and internal turning, optimised for economical machining of cast iron with a double‑sided chipbreaker and cylindrical mounting hole CVD‑coated cemented carbide grade T515 ISO DNMG150612 rhombic insert, 55° angle Double‑sided chipbreaker for stable chips Consistent chip control for cast iron turning The CVD‑coated T515 grade is developed for efficient machining of cast iron, delivering stable chip formation and predictable cutting performance. The applied coating increases abrasive wear resistance while the substrate retains toughness, which together reduce tool consumption in serial production. For operations with interrupted cuts or variable stability, the double‑sided chipbreaker promotes repeatable chip segmentation and prevents long, stringy chips that would otherwise slow down downstream processes. Secure clamping and ISO compatibility for predictable results The rhombic DNMG form with a 55° approach angle and a cylindrical hole ensures precise positioning in compatible toolholders and steady cutting forces. The 0° clearance angle provides a neutral geometry suitable for a wide range of turning tasks, while the 6.35 mm thickness contributes to mechanical strength under heavier engagement. Compliance with ISO dimensions simplifies toolholder selection and reduces setup time, so process planners can rely on consistent assembly and repeatable part quality. Improved productivity through economical indexable design Being double‑sided and manufactured from cemented carbide, the insert reduces per‑edge cost by allowing re‑indexing and extending the usable life of each unit. The CVD coating improves wear resistance at elevated cutting speeds typical for cast iron, enabling higher throughput without sacrificing surface finish. The built combination of geometry and grade helps to lower overall tooling costs while maintaining stable machining performance in production environments. Practical guidance for selection and use This insert is intended for standard external and internal turning; selection of chipbreaker and grade should follow considerations of workpiece stability, cut interruptions and required cutting speed. The cutting system comprises the ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. Compatibility with a holder depends on insert form, clearance angle, tolerance class, fixation, size and thickness — verify these parameters when replacing or upgrading tooling to ensure optimal clamping and performance. For economical, high‑throughput cast iron turning choose the Tungaloy DNMG150612 T515 insert — contact Metav Werkzeuge for tailored application advice and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6733829 Manufacturer SKU: TUN6733829 SKU: 6733829-Tungaloy Model series: ISO turning indexable inserts Material: cemented carbide Grade: T515 Designation: DNMG150612 Application: Turning Thickness: 6.35 mm Core specifications Corner radius: 1.2 mm Insert size: 15 Approach angle: 55° Clearance angle: 0° Hole style: cylindrical hole Special features CVD‑coated cemented carbide (T515) Rhombic insert form (DNMG) Double‑sided chipbreaker ISO‑compliant dimensions Intended for cast iron machining System components: insert, holder/boring bar, shim/clamping set, screws FAQ What materials is this insert optimised for? The DNMG150612 T515 insert is optimised for machining cast iron; the T515 grade and chipbreaker promote stable chips and economic cutting in grey and nodular cast irons. How is the insert mounted in the toolholder? The insert uses a cylindrical centre hole and standard clamping geometry for ISO DNMG holders; mounting requires the matching holder, a shim/clamping set and the appropriate screw. Does the insert suit interrupted cuts? Yes, the T515 grade and robust 6.35 mm thickness provide resilience for operations with moderate interruptions; chipbreaker choice should match the specific stability and cutting conditions. What benefits does the CVD coating provide? The CVD coating on T515 improves abrasive wear resistance at elevated cutting speeds, helping to extend edge life and maintain consistent surface finish during longer runs. Can the insert be indexed to use multiple cutting edges? The insert features a double‑sided chipbreaker and ISO geometry allowing re‑indexing to fresh cutting edges, which lowers per‑edge tooling costs and supports continuous production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150612 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated wear resistance and a robust 1.2 mm corner radius for consistent stainless steel turning under stable to slightly interrupted conditions; the insert’s ISO geometry and cylindrical hole ensure secure clamping and predictable tool life. Order the DNMG150612 T6215 insert directly via Metav Werkzeuge or request application advice from our consultants. DNMG150612 T6215 DNMG Turning Insert for Turning – Tungaloy A DNMG150612 T6215 indexable turning insert engineered for external and internal turning of stainless steels, offering a CVD-coated carbide grade for extended wear resistance and stable chip control. CVD-coated carbide grade T6215 Designed for stainless steel turning Rhombic DNMG shape, 55° cutting geometry Cylindrical hole and 6.35 mm plate thickness Reliable wear resistance for demanding stainless steel operations The CVD-coated T6215 grade combines a hard, wear-resistant coating with a tough carbide substrate to reduce flank wear and maintain cutting-edge integrity during repetitive turning. For materials prone to work hardening such as stainless steels, the coating improves thermal stability and lowers adhesion, which results in more consistent surface finish and longer intervals between index changes. The rhombic geometry with a 55° approach angle and 1.2 mm corner radius delivers a balance between strength and finish; the rounded corner reduces chipping risk while still supporting reasonable feed rates. This technical combination supports stable process windows in production environments. ISO compatibility and secure clamping in industrial tool systems The insert is manufactured to ISO dimensions and tolerances, making it compatible with a wide range of standard external holders and boring bars when matched by form, relief angle, tolerance class, clamping method, size and thickness. The cylindrical hole and 6.35 mm plate thickness ensure a positive, repeatable clamping interface that resists rotation and minimises micro-movements under load. A relief angle of 0° on the insert is part of the geometry specification and should be matched to the chosen holder and toolpath strategy. For reliable set-ups, pair the insert with the correct top clamping or screw system, a suitable shim or backing pad and spare screws as part of the system assembly. Process reliability, chip control and system benefits With a double-sided chipbreaker and a balanced geometry, the insert supports controlled chip formation and evacuation during both external and internal turning. This reduces the risk of built-up edge and chatter in stable to lightly interrupted cuts, contributing to predictable tool life and reduced machine downtime. The ISO plate format allows quick index changes and easy stock management, while the CVD coating helps preserve edge integrity across runs. For a complete solution, the system comprises the insert, a compatible holder, backing pad or clamping kit and replacement screws so that maintenance and reassembly remain straightforward on the shop floor. Contact Metav Werkzeuge today for tailored application recommendations on Tungaloy inserts and to ensure the correct DNMG150612 T6215 geometry and grade for specific stainless steel turning tasks; Metav Werkzeuge provides technical guidance and rapid availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6875590 Manufacturer SKU: TUN6875590 Brand: Tungaloy Designation: DNMG150612 T6215 Model series: ISO turning inserts Facts Corner radius: 1.2 mm Plate size: 15 mm Plate thickness: 6.35 mm Relief angle: 0° Approach/cutting angle: 55° Hole: with cylindrical hole Special features CVD-coated carbide grade T6215 Rhombic DNMG plate form Double-sided chipbreaker ISO-standardised insert for turning Intended use: external and internal turning Suitable for stainless steels under stable to slightly interrupted cuts System components: holder, backing pad/clamping set, spare screws FAQ What materials is this insert suitable for? The DNMG150612 T6215 insert is designed primarily for stainless steels and performs well under stable to lightly interrupted turning conditions thanks to the CVD-coated T6215 grade. How does the insert’s geometry affect performance? The rhombic DNMG shape with a 55° cutting geometry and 1.2 mm corner radius gives a compromise between edge strength and surface finish, reducing chipping while enabling reliable turning performance. Is the insert compatible with standard holders? Yes; the insert follows ISO dimensions, and compatibility depends on matching form, relief angle, tolerance class, clamping and plate thickness. The cylindrical hole and 6.35 mm thickness support secure clamping. What system components are recommended for mounting? A matched external holder or boring bar, backing pad or clamping set and the correct replacement screws are recommended to ensure stable mounting and repeatable results with this insert. Can the insert be used for interrupted cuts? The T6215 grade and geometry are suitable for stable to lightly interrupted conditions; heavily interrupted machining may require a different grade or a larger corner radius. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance, 55° rhombic geometry and a reliable double-sided chipbreaker for efficient turning of stainless steels — order directly via Metav Werkzeuge or consult our specialists for application support. DNMG 150612 T6215 turning insert by Tungaloy — CVD-coated carbide for stainless steel turning The DNMG150612 T6215 Tungaloy turning insert is an ISO-standard rhombic insert designed for external and internal turning of stainless steels under stable to mildly interrupted conditions. CVD-coated carbide grade T6215 Optimised for stainless steel turning Rhombic 55° geometry, 6.35 mm thickness Double-sided chipbreaker, 1.2 mm corner radius Improved process reliability through suited geometry and coating The combination of a 55° rhombic geometry and a CVD-coated carbide grade provides predictable cutting behaviour and enhanced edge stability during medium-duty turning. This geometry supports secure clamping in ISO holders and produces consistent chip formation; the double-sided chipbreaker helps maintain stable cutting forces and reduces the risk of built-up edge when machining stainless steel. For production-focused workshops, these characteristics translate into steady cycle times and fewer unexpected interruptions. Material-specific benefits that reduce machining costs The T6215 grade is formulated for wear resistance when machining stainless steel, offering longer tool life compared with uncoated or general-purpose grades. The wear-resistant coating delays flank and crater wear, allowing for higher cumulative material removal before index changes are required. As a result, process economics improve through lower index consumption and fewer tool changes, delivering a measurable effect on productivity in batch and small-series turning operations. Secure clamping and dimensional features for repeatable results With a 6.35 mm plate thickness, a 15 mm inscribed circle, a 1.2 mm corner radius and a 0° clearance angle, the insert gives robust support against edge chipping and ensures repeatable dimensional outcomes. The insert is supplied with a cylindrical hole for positive locating and reliable screw clamping, so compatibility depends on matching holder form, clearance angle, tolerance class, fastening method, size and thickness. This design focus aids in achieving consistent surface finish and dimensional control across repeated runs. Practical application advice and integration into tool systems The insert is suitable for use in a standard ISO-indexable system — combine the plate with a compatible external holder, clamping pad and replacement screws to complete the tool assembly. For interrupted cuts or unstable set-ups, select a matching chipbreaker and assess feed and depth settings to preserve edge life. Specification details such as the DNMG150612 designation and the manufacturer SKU 6944590-Tungaloy simplify ordering and ensure the correct grade and geometry are supplied for the intended turning task. Contact Metav Werkzeuge for tailored advice on the Tungaloy DNMG150612 T6215 insert, to confirm holder compatibility or to place an order by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6944590 Manufacturer SKU: TUN6944590 Model series: ISO-Drehwendeschneidplatten Facts Inscribed circle: 15 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 55° Clearance angle: 0° Hole: with cylindrical hole Design and special features Material: carbide, CVD-coated (grade T6215) Plate form: rhombic Chipbreaker: double-sided Application: turning of stainless steels under stable to slightly interrupted conditions FAQ What materials is this insert intended for? The DNMG150612 T6215 insert is developed for machining stainless steels; the CVD-coated carbide composition provides wear resistance suited to that material class. How does the chipbreaker design affect cutting performance? The double-sided chipbreaker on this indexable insert helps control chip shape and reduce cutting force peaks, improving process stability during turning operations. Which holders are compatible with this ISO plate? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG150612 designation ensures a standard interface for ISO holders designed for rhombic plates. How many usable edges are available per insert? This is a double-sided indexable plate, offering multiple indexed cutting edges before replacement is required, which supports economical tool usage. Is the product supplied with screws or a clamping kit? The insert is supplied as the plate itself; a suitable external holder, locating pad and replacement screws are required to complete the assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, consistent geometry and straightforward holder compatibility to maintain stable production in stainless steel turning operations; order the insert through Metav Werkzeuge or consult our specialists for selection and process advice. DNMG150612 T6215 ISO turning insert for stainless steel — Tungaloy The DNMG150612 T6215 is an ISO‑standard indexable insert intended for external and internal turning of stainless steel under stable to slightly interrupted cutting conditions. CVD-coated carbide for high wear resistance Designed for stainless steel turning Rhombic 55° geometry with 1.2 mm radius Double-sided chipbreaker with cylindrical hole Enhanced tool life through engineered CVD coating The insert combines a CVD-coated cemented carbide grade with a geometry optimised for machining rostfreier Stahl, delivering measurable improvements in tool life and edge stability. The chemical vapour deposition (CVD) coating forms a hard, wear‑resistant layer that reduces adhesive and abrasive wear during sustained cuts; this means reliable performance and fewer indexings. For operations where consistent surface finish and predictable tool change intervals matter, this construction translates into lower downtime and more efficient cycle planning. Accurate geometry for secure clamping and improved surface finish A 55° geometry in a rhombic form provides a balanced approach between strength and accessibility for external and internal turning, while the 1.2 mm corner radius supports both light finishing and general turning tasks. The insert’s 0° relief angle and cylindrical hole enable firm, repeatable clamping in compatible holders; the result is reduced vibration, improved dimensional stability and a finer surface on the workpiece. The double-sided chipbreaker offers two usable cutting edges per index, increasing usable life without compromising chip control. Application flexibility and process stability for shop-floor productivity Classified as an ISO-standard DNMG insert and supplied in grade T6215, the indexable geometry suits a range of turning operations on stainless steel where stable chip formation and predictable wear behaviour are required. The insert is recommended for stable to slightly interrupted cuts; selecting the appropriate chipbreaker and matching the holder to the insert’s form, free angle, tolerance class, fastening method, size and thickness ensures optimal results. Overall, the design supports higher throughput and consistent part quality with fewer unexpected tool changes. For reliable stainless steel turning with proven wear performance, request the Tungaloy DNMG150612 T6215 from Metav Werkzeuge or ask our specialists at Metav Werkzeuge for application-specific recommendations — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: 6877400 Manufacturer SKU: TUN6877400 Model series: ISO turning inserts Insert designation: DNMG150612 Material: carbide Grade/coating: T6215 Core technical data Shape angle: 55° Corner radius: 1.2 mm Relief angle: 0° Thickness: 6.35 mm Insert size: 15 mm Design and features Rhombic insert geometry Cylindrical hole Double-sided chipbreaker CVD-coated cemented carbide ISO‑standard turning insert Compatible with matching external holder or boring bar FAQ What materials is this insert suitable for? The DNMG150612 T6215 insert is designed primarily for rostfreier Stahl (stainless steel) turning and performs well under stable to slightly interrupted cutting conditions. What advantages does the T6215 grade provide? The T6215 CVD‑coated cemented carbide offers improved wear resistance and stable cutting-edge behaviour, reducing flank and crater wear for longer usable life. Is this insert indexable and double‑edged? Yes, the insert is double‑sided with a chipbreaker on each side, providing two usable cutting edges per index and helping to extend tool utilisation. Which geometry and radius suit which tasks? The 55° rhombic geometry with a 1.2 mm corner radius offers a compromise between strength and versatility: suitable for general turning, light finishing and internal operations that require access and stability. How is compatibility with holders ensured? Compatibility depends on insert form, free angle, tolerance class, fastening style, size and thickness; matching these parameters with the holder or boring bar ensures secure clamping and predictable cutting behaviour. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T6215 Wendeplatten - Tungaloy
The DNMG150612 T6215 offers robust wear resistance and consistent chip control thanks to its CVD-coated carbide grade and precise ISO geometry; combine long tool life, predictable surface finish and simple clamping compatibility for efficient turning operations. Order the DNMG150612 T6215 directly via Metav Werkzeuge or ask our consultants if needed. DNMG150612 T6215 ISO turning insert – CVD-coated carbide, 55° DNMG150612 T6215 Tungaloy insert for ISO-standard external and internal turning, designed for stable to lightly interrupted cuts and optimised for rostfreier Stahl machining CVD-coated carbide grade T6215 Designed for turning rostfreier Stahl ISO DNMG 150612 rhombic insert Double-sided with cylindrical hole Consistent tool life and predictable wear for busy turning shops The CVD-coated T6215 grade combines a wear-resistant coating with a tough carbide substrate to extend tool life under continuous production. The rhombic DNMG150612 geometry with a 55° approach angle spreads cutting forces evenly, reducing vibration and improving surface integrity. For industrial turning applications, this results in fewer insert changes and more predictable cycle times, supporting higher uptime and lower tooling costs per component. Reliable chip control and secure clamping for varied operations A double-sided chipbreaker and a cylindrical hole for positive locating enable repeatable chip formation and stable clamping, even in semi-stable cutting conditions. The 1.2 mm corner radius and 6.35 mm plate thickness give a balance between edge strength and adaptability for finishing to semi-roughing passes. These characteristics simplify grade selection and allow machining strategies to focus on process stability and consistent part quality rather than constant tool adjustments. ISO compatibility and simple toolholder integration Manufactured to ISO standards, the insert aligns with common holders by form, free angle and tolerance class, which reduces setup complexity for production environments using standard tooling systems. The 0° relief and rhombic shape make the insert versatile for both external profiles and internal turning tasks. Clear specification of the ISO designation and hole style helps maintenance teams source direct replacements and maintain tool inventory with minimal downtime. For high-process reliability with Tungaloy’s T6215 grade, contact Metav Werkzeuge for availability and application advice via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6944665 Manufacturer SKU: TUN6944665 Manufacturer item no: 6944665 Series: ISO-Drehwendeschneidplatten Designation: DNMG150612 Numbers / Core technical data Corner radius: 1.2 mm Approach angle: 55° Relief angle: 0° Insert thickness: 6.35 mm Insert size: 15 mm Designs / Special features Rhombic plate form Cylindrical hole for positive locating Double-sided chipbreaker CVD-coated carbide grade T6215 Suitable for turning rostfreier Stahl Application: turning FAQ Is this insert suitable for machining rostfreier Stahl? The DNMG150612 T6215 is formulated specifically for machining rostfreier Stahl under stable to lightly interrupted cutting conditions, offering good wear resistance and chip control. What holder compatibility should be checked before use? Compatibility depends on form, free angle, tolerance class, fastening and size; ensure the holder accepts ISO DNMG inserts and accommodates a 15 mm size and 6.35 mm thickness. Can the grade handle medium-duty roughing as well as finishing? The CVD-coated T6215 grade provides a balance of wear resistance and toughness suitable for finishing and light to medium-duty turning where process stability is maintained. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T6215 Wendeplatten - Tungaloy
DNMG150612 T6215 Wendeplatte (ISO-Drehwendeschneidplatte) von Tungaloy – Drehen Die DNMG150612 T6215 ist eine ISO-genormte Wendeplatte für präzises Außen- und Innendrehen, konzipiert für verschleißarme Bearbeitung von rostfreiem Stahl unter stabilen bis leicht unterbrochenen Schnittbedingungen CVD-beschichtetes Hartmetall T6215 Hohe Verschleißfestigkeit bei rostfreiem Stahl ISO-Form DNMG 15 mm Rhombisch Doppelseitiger Spanbrecher für längere Einsatzzeiten Mit zylindrischem Loch und standardisierter Passform Materialqualität für konstante Standzeiten Die CVD-beschichtete Hartmetall-Sorte T6215 bietet gezielte Härte und Zähigkeit, wodurch die Verschleißfestigkeit bei der Bearbeitung von rostfreiem Stahl deutlich steigt. Durch die Beschichtung wird die Wärmeaufnahme reduziert und die Lebensdauer der Schneidkante verlängert. Diese Materialkombination sorgt für gleichbleibende Ergebnisse bei Serienfertigung und erhöht die Produktivität, weil Nachbearbeitungen seltener erforderlich sind. Präzise Passform und Wiederholgenauigkeit Die ISO-genormte Form DNMG sorgt für zuverlässige Kompatibilität mit gängigen Haltersystemen; Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmen die Passung. Der Eckenradius 1,2 und der Einstellwinkel 55° gewährleisten stabile Schneidbedingungen und reproduzierbare Schnittgeometrien. Das rhombische Plattenformat erleichtert schnellen Austausch und reduziert Rüstzeiten in Fertigungsprozessen. Angepasste Anwendung für typische Zerspanungsaufgaben Einsatzgebiet ist primär das Außen- und Innendrehen von rostfreiem Stahl unter stabilen bis leicht unterbrochenen Bedingungen. Der doppelseitige Spanbrecher unterstützt kontrollierte Spanbildung und trägt zur Prozesssicherheit bei. Fertigungsbetriebe, Lohnfertiger und Instandhaltungswerkstätten profitieren von der Kombination aus robustem Schneidstoff und optimierter Spanform für konstante Oberflächenqualität. Wirtschaftlichkeit durch durchdachtes Wendeplattenkonzept Mehrfache Schneidkanten durch das doppelseitige Design reduzieren die Kosten pro Schnittkante und verbessern die Gesamtwirtschaftlichkeit. Im Verbund mit geeigneten Haltern und einer auf den Werkstoff abgestimmten Schnittdatenstrategie ermöglicht die Wendeplatte effiziente Fertigungszyklen und weniger Stillstandzeiten. Die T6215-Sorte wurde für produktive Zerspanung mit guter Standzeit ausgelegt. Empfehlung: Die Tungaloy DNMG150612 T6215 überzeugt durch langlebige Verschleißfestigkeit und hohe Prozesssicherheit; für technische Beratung und Bestellung Metav Werkzeuge per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren. Produktmerkmale Artikelnummer: 6875552 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: DNMG150612 Hersteller SKU: TUN6875552 Fakten Radius: 1.2 Winkel: 55° Freiwinkel: 0° Plattendicke: 6,35 Plattengröße: 15 Besonderheiten Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T6215 Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen Einsatz: Außen- und Innendrehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben Einsatzbedingungen: stabil bis leicht unterbrochen FAQ Welche Werkstoffe lassen sich mit dieser Wendeplatte bearbeiten? Die DNMG150612 T6215 Wendeplatte von Tungaloy ist speziell für das Drehen von rostfreiem Stahl ausgelegt und liefert dabei gute Oberflächengüten und stabile Standzeiten. Ist die Plattenform mit gängigen Haltern kompatibel? Die ISO-genormte DNMG-Ausführung ist auf Kompatibilität ausgelegt; die tatsächliche Passung hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Wie trägt die Sorte T6215 zur Prozessstabilität bei? Die CVD-Beschichtung der Sorte T6215 reduziert Verschleiß und Wärmeaufnahme, wodurch die Schneidkante länger ihre Geometrie behält und konstante Bearbeitungsergebnisse erzielt werden. Kann die Wendeplatte mehrfach genutzt werden? Die DNMG150612 verfügt über einen doppelseitigen Spanbrecher, wodurch mehrere Schneidkanten nutzbar sind und die Wirtschaftlichkeit pro Schneidkante steigt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com