DNMG 150612 T6215 Wendeplatten - Tungaloy
DNMG150612 T6215 Drehwendeschneidplatte für Drehen, Tungaloy DNMG150612 T6215 ist eine ISO-genormte Drehwendeschneidplatte für das Drehen rostfreier Stähle unter stabilen bis leicht unterbrochenen Bedingungen ISO-genormte DNMG-Form für universellen Einsatz CVD-beschichtetes Hartmetall für lange Standzeit Doppelseitiger Spanbrecher für gleichmäßige Spanbildung Eckenradius 1,2 mm für präzise Konturen Zylindrisches Loch, kompatibel mit gängigen Haltern Langlebige Beschichtung für hohe Prozesssicherheit Die Kombination aus CVD-beschichtetem Hartmetall und der Sorte T6215 sorgt für verschleißarme Bearbeitung insbesondere bei rostfreiem Stahl. Die CVD-Beschichtung bildet eine harte Deckschicht, die Abrieb reduziert und so die Standzeit verlängert. Anwender profitieren von weniger Werkzeugwechseln und konstanter Schnittqualität bei Serien- und Mehrteilarbeit. Normkonforme Form und einfache Kompatibilität Als Teil der ISO-Drehwendeschneidplatten ist die Platte für standardisierte Halter ausgelegt; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Die rhombische Plattenform DNMG150612 erlaubt sowohl Außen- als auch Innendrehen, wobei das zylindrische Loch eine sichere Befestigung und Austauschbarkeit gewährleistet. Damit lässt sich die Platte in bestehende Werkzeugsysteme nahtlos integrieren. Wirtschaftlichkeit durch stabile Spanformung Der doppelseitige Spanbrecher ist auf gleichmäßige Spanbildung ausgelegt und reduziert Vibrationen sowie Standschwankungen. In Kombination mit der Sorte T6215 ergibt sich eine robuste Performance bei mittleren Schnittbedingungen; dies führt zu geringeren Ausfallzeiten und besserer Planbarkeit im Fertigungsprozess. Die Platte bietet somit ein gutes Verhältnis aus Produktivität und Werkzeugkosten. Zielgruppe und Anwendungsempfehlung Die Platte richtet sich an Fertigungsbetriebe und Instandhaltungswerkstätten, die rostfreien Stahl zerspanen und Wert auf Prozesssicherheit legen. Für optimale Ergebnisse empfiehlt sich die Auswahl eines passenden Außenhalters oder einer Bohrstange mit abgestimmtem Freiwinkel und einer geeigneten Unterlage/Klemmsatz. Bei Fragen zur Kombination mit Haltern oder Schnittdaten steht die technische Beratung zur Verfügung. Empfehlung: Für produktive und verschleißarme Bearbeitung von rostfreiem Stahl empfiehlt sich die DNMG150612 T6215 Tungaloy-Wendeplatte; bei Beratungsbedarf wenden Sie sich an Metav Werkzeuge, E‑Mail info@metav-werkzeuge.com, Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6944610 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: DNMG150612 Fakten Eckenradius: 1,2 mm Winkel: 55° Plattendicke: 6,35 mm Plattengröße: 15 mm Besonderheiten Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD: chemische Dampfabscheidung, harte Deckschicht) Sorte: T6215 (verschleißfest, geeignet für rostfreien Stahl) Plattenform: rhombisch Spanbrecher: doppelseitig Loch: mit Loch, zylindrisches Loch Anwendung: Drehen FAQ Für welche Werkstoffe ist die DNMG150612 T6215 geeignet? Die DNMG150612 T6215 Tungaloy-Wendeplatte ist speziell für die Bearbeitung von rostfreiem Stahl ausgelegt; die Sorte T6215 bietet verschleißarme Leistung bei stabilen bis leicht unterbrochenen Schnitten. Welche Vorteile bietet die CVD-Beschichtung? Die CVD-Beschichtung der DNMG150612 reduziert Abrieb und erhöht die Standzeit; sie sorgt für konstante Schnittkantenstabilität und bessere Oberflächengüte bei Serienfertigung. Wie wähle ich den richtigen Halter für diese Wendeplatte aus? Beim Einsatz der DNMG150612 ist auf Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke zu achten; ein passender Außenhalter oder eine Bohrstange mit abgestimmtem Freiwinkel empfiehlt sich für optimale Stabilität. Ist diese Platte für unterbrochene Schnitte geeignet? Die Sorte T6215 und der doppelseitige Spanbrecher erlauben den Einsatz bei leicht unterbrochenen Bedingungen; für sehr starke Unterbrechungen sollten spezifische Sonderplatten geprüft werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 150612 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated T6215 grade, 1.2 mm corner radius and ISO compatibility for consistent turning results; these features deliver improved wear resistance and reliable chip control. Order the DNMG150612 T6215 insert directly via Metav Werkzeuge or ask our consultants for tailored advice. DNMG150612 T6215 indexable turning insert by Tungaloy — CVD-coated carbide, 1.2 mm radius A DNMG150612 T6215 indexable turning insert designed for precise external and internal turning of stainless steels, offering robust wear resistance under stable to lightly interrupted cutting conditions CVD-coated carbide grade T6215 Optimised for stainless steels 55° rhombic geometry with 1.2 mm radius Cylindrical hole for secure clamping High wear resistance that extends tool life The insert's CVD-coated surface and carbide substrate deliver consistently high wear resistance, making the grade particularly suitable for turning stainless steels under steady conditions. The coating reduces adhesion and flank wear, which in turn extends usable life compared with uncoated grades; this means fewer indexings and lower tool-change frequency in production environments. The rational benefit is clear: stable performance over longer tool cycles improves productivity and reduces unexpected downtime. ISO standardisation for straightforward integration Being part of the ISO turning insert family, the geometry and tolerances follow established norms, so compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness. The system approach comprises an ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. This modular setup allows easy replacement and predictable seating, which supports efficient tool management and reproducible process parameters in serial production. Geometry and chip control for reliable cutting The 55° rhombic shape combined with a 1.2 mm corner radius provides a balance between strength and profile detail: robust enough to withstand interruptions while still enabling accurate contouring. The double-sided chipbreaker promotes consistent chip formation, and the cylindrical hole secures the insert in its seat for reliable clamping. With a plate thickness of 6.35 mm and nominal size 15, the insert offers mechanical stability that benefits heavier cross-sections and interrupted cuts, reducing vibration and improving surface finish. Practical selection and application guidance Select the chipbreaker and the T6215 grade according to workpiece material, machining type and machine stability; the grade is aimed at wear resistance for stainless steels in stable to lightly interrupted operations. For system readiness check holder compatibility—form, free/relief angle (0°), tolerance and fastening—before assembly. The insert is supplied in the ISO DNMG format and fits common clamping systems used in turning operations; this makes it suitable for production workshops seeking predictable, repeatable results with straightforward logistics. Contact Metav Werkzeuge today for application advice or to secure supply of Tungaloy turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944725 Manufacturer SKU: TUN6944725 SKU: 6944725-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Shape: rhombic Size: 15 Thickness: 6.35 mm Corner radius: 1.2 mm Insert angle: 55° Relief angle: 0° Hole style: cylindrical hole Special features Grade/coating: T6215 (CVD-coated) Material: carbide Chipbreaker: double-sided Application: turning (external and internal) Typical use: stainless steels under stable to slightly interrupted conditions System components: ISO insert, holder or boring bar, shim/clamping set, replacement screws FAQ Which materials are best suited to this insert? The DNMG150612 T6215 Tungaloy turning insert is optimised for machining stainless steels and performs best under stable to lightly interrupted cutting conditions. How does the T6215 grade improve process reliability? The T6215 CVD-coated carbide provides enhanced wear resistance and consistent cutting-edge behaviour, which helps maintain surface quality and reduces the frequency of indexings when turning stainless steels. What geometry-related benefits does the 55° rhombic shape offer? A 55° rhombic geometry with a 1.2 mm corner radius combines strength and form control, allowing reliable contouring with good resistance to interruptions and improved surface finish. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO specifications; compatibility is determined by insert form, relief angle, tolerance class, fastening, size and thickness, so match these parameters with the chosen holder. How is the insert secured in the holder? The insert features a cylindrical hole for positive location and is used together with the appropriate clamping set and replacement screws as part of the ISO system assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T6215 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant, CVD‑coated carbide grade and the proven DNMG 55° geometry to secure consistent turning performance on rostfreier Stahl; order directly via Metav Werkzeuge or consult our application specialists for the optimal chipbreaker and clamping setup. DNMG150612 T6215 — DNMG indexable turning insert, CVD‑coated carbide, Tungaloy The DNMG150612 T6215 is an ISO‑standard, CVD‑coated cemented carbide indexable insert intended for turning operations, optimised for reliable machining of rostfreier Stahl under stable to lightly interrupted cutting conditions. CVD‑coated carbide grade T6215 for wear resistance 55° rhombic DNMG geometry for versatile external turning Double‑sided chipbreaker for consistent chip control Cylindrical locating hole; 6.35 mm plate thickness Reliable wear performance for rostfreier Stahl turning The insert’s CVD‑coated cemented carbide composition (grade T6215) provides a robust surface resistant to abrasive and adhesive wear that commonly occurs when machining rostfreier Stahl. In practical terms, this means more consistent tool life and fewer unplanned insert changes during series production. The 1.2 mm corner radius supports a stable cutting edge for profile preservation and moderate finishing, while the coating reduces the risk of built‑up edge and improves surface finish even in thermally demanding operations. Geometry and clamping that reduce setup uncertainty The 55° rhombic DNMG geometry combines accessibility for external contours with a compact edge form that works well in turning and light profiling. The insert is supplied with a cylindrical locating hole and a plate thickness of 6.35 mm, enabling secure clamping in ISO‑compliant holders; compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness. These standardised interfaces simplify tool inventory management and lower the time spent on holder selection. Stable chip control for uninterrupted production Equipped with a double‑sided chipbreaker, the insert offers reliable chip formation across a range of feeds and depths typical for general turning. The chipbreaker design reduces vibration and helps maintain consistent cutting forces, which contributes to repeatable dimensional accuracy and surface quality. For workshops seeking process reliability, this translates to fewer interruptions and a more predictable machining cycle time. Practical selection and process guidance For best results with rostfreier Stahl, pair the insert’s T6215 grade and chipbreaker style with an appropriate holder rigidity and coolant strategy. Where operations become heavily interrupted or involve severe chatter, consider a more robust clamping arrangement or a different grade tailored to interrupted cuts. If uncertainty remains about the ideal chipbreaker or cutting data for a specific application, technical advice is recommended to match the insert geometry and grade to the component and machine conditions. Contact Metav Werkzeuge for an application consultation on the Tungaloy DNMG150612 T6215 insert and advice on holder compatibility — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 6944705 Manufacturer SKU: TUN6944705 Designation: DNMG150612 Model series: ISO‑Drehwendeschneidplatten Numbers / Core technical data Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 15 mm Insert angle: 55° Clearance angle: 0° Special features / Versions Material: cemented carbide Coating: CVD‑coated (grade T6215) Hole: with cylindrical hole Chipbreaker: double‑sided Plate form: rhombic Application: Turning (Drehen) ISO‑standard insert; compatibility via form, clearance angle, tolerance class, fastening, size and thickness FAQ What machining tasks is this insert best suited for? The DNMG150612 T6215 insert is best suited for external and internal turning tasks on rostfreier Stahl in stable to lightly interrupted conditions, where the CVD coating supports wear resistance and surface quality. How does the chipbreaker affect performance? The double‑sided chipbreaker on the DNMG150612 provides controlled chip formation across common feeds, improving stability and enabling consistent surface finish during continuous turning operations. Is this insert compatible with standard ISO holders? Yes. The insert follows ISO standards for form and size; compatibility depends on matching the holder to the insert’s geometry, clearance angle, tolerance class, fastening method, size and thickness. Which material grade is used and what are the benefits? Grade T6215 is a CVD‑coated cemented carbide designed for wear resistance when machining rostfreier Stahl, offering improved edge life and reduced risk of built‑up edge. Can the insert be used for interrupted cuts? The insert is intended for stable to lightly interrupted cuts; for heavily interrupted machining, select a grade and chipbreaker specifically optimised for impact resistance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150612 T6215 Wendeplatten - Tungaloy
Benefit from the proven combination of a CVD‑coated carbide grade and an ISO rhombic geometry for efficient, reliable stainless‑steel turning. The 1.2 mm corner radius and double‑sided chipbreaker provide stable chip control and extended tool life. Order directly via Metav Werkzeuge or ask the consultants for application support. DNMG 150612 T6215 Turning Insert — Tungaloy, CVD‑coated carbide, 1.2 mm radius A DNMG150612 T6215 insert for precision external and internal turning, designed for stainless‑steel machining under stable to lightly interrupted conditions. ISO DNMG geometry, 55° rhombic CVD‑coated carbide grade T6215 1.2 mm corner radius for robust finish Double‑sided chipbreaker, economical indexing High productivity for stainless‑steel turning The CVD‑coated carbide composition and T6215 grade focus on wear resistance and consistent cutting performance when machining stainless steel. The coating improves adhesion resistance and heat management at the cutting edge, which supports longer tool life and more predictable index intervals. As a result, process stability is increased and downtime for tool changes is reduced, improving overall throughput in serial production environments. Secure seating and ISO compatibility for predictable results Built to the ISO standard DNMG geometry with a 55° rhombic geometry, the insert fits common external holders when form, clearance, tolerance class, fixation, size and thickness match. The cylindrical hole and 0° clearance arrangement ensure reliable locating and clamping with the corresponding shim and clamp set. Correct mounting in a compatible toolholder creates repeatable cutting conditions and reduces vibration, which benefits surface finish and dimensional accuracy. Efficient chip control and machining stability The double‑sided chipbreaker is designed for effective chip control during external and internal turning. Combined with the 1.2 mm corner radius, the chipformer reduces the risk of edge chipping and supports a better surface quality under stable to slightly interrupted cuts. Choose the chipbreaker and grade according to workpiece stability and the desired balance between cutting edge strength and finish to obtain the most economical machining cycle. Practical system considerations and maintenance advantages The component functions as part of a system: ISO insert, suitable external holder or boring bar, locating shim/clamp set and replacement screws. The insert’s 6.35 mm plate thickness and rhombic form offer a robust contact surface and allow economical indexing on both sides. Regular inspection of the seating face and clamping hardware keeps the assembly secure and contributes to repeatable results and tool‑life optimisation. For production planning the combination of grade, chipbreaker and holder selection is decisive for cost‑effective turning. For application advice or to order genuine Tungaloy DNMG150612 T6215 inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — specialists are available to assist with holder compatibility and cutting‑strategy selection. Technical Data Article number: 6944678 Manufacturer SKU: TUN6944678 Model series: ISO turning inserts Article name: DNMG150612 T6215 Tungaloy insert Material: cemented carbide Grade: T6215 Facts Corner radius: 1.2 mm Plate thickness: 6.35 mm Insert size: 15 mm Main angle: 55° Clearance angle: 0° Special features CVD coating Double‑sided chipbreaker Cylindrical locating hole Rhombic insert shape Suitable for external and internal turning Designed for stable to lightly interrupted cuts Compatible with ISO‑standard holders System: insert, holder, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The DNMG150612 T6215 insert is optimised for machining stainless steel under stable to slightly interrupted cutting conditions; it also performs where good wear resistance and stable chip formation are required. Is the DNMG150612 indexable and double‑sided? Yes, the insert is double‑sided with two usable cutting edges per side; economical indexing extends service life and reduces the number of inserts needed. How is compatibility with a toolholder ensured? Compatibility depends on insert form, clearance angle, tolerance class, fixation, size and thickness; match the DNMG geometry and 6.35 mm thickness with the appropriate ISO holder and clamp system. What advantages does the T6215 grade offer? The T6215 CVD‑coated grade delivers enhanced wear resistance and improved heat handling for consistent cutting performance and longer edge life when turning stainless steels. Does the DNMG150612 require special mounting components? The insert locates with a cylindrical hole and should be mounted with the correct shim/clamp set and replacement screws in a compatible external holder or boring bar to ensure secure seating and repeatable cutting conditions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150612 T6215 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD-coated cemented carbide and a double-sided chipbreaker for consistent performance when turning stainless steels; its ISO rhombic geometry and 55° cutting angle ensure stable engagement and easy integration into standard holders. Order the insert via Metav Werkzeuge or consult the technical team for application-specific advice. DNMG 150612 T6215 Tungaloy ISO turning insert — CVD-coated cemented carbide for stainless steels The DNMG150612 T6215 Tungaloy insert is an ISO rhombic indexable insert designed for external and internal turning of stainless steels under stable to mildly interrupted conditions DNMG ISO rhombic geometry, 55° cutting angle CVD-coated carbide T6215 for stainless steels Double-sided chipbreaker for stable cuts Cylindrical hole, compatible with standard holders Consistent performance for stainless-steel turning The combination of a CVD-coated surface and cemented carbide substrate in this grade provides a controlled wear pattern and reliable cutting-edge security. The coating improves oxidation resistance and reduces adhesive wear when machining stainless steels, which in turn supports longer intervals between insert changes. As a result, the tool offers predictable tool life and repeatable component quality, particularly where surface finish and dimensional stability matter. Secure seating and straightforward compatibility The rhombic form with a 55° cutting angle and a cylindrical hole ensures secure clamping in a wide range of standard holders. Compatibility depends on form, clearance angle, tolerance class, fixation method, size and thickness, so the insert integrates smoothly into established tool systems. The 6.35 mm thickness and ISO designation guarantee mechanical stability during heavy engagement and make holder selection and replacement straightforward in production environments. Improved chip control and process stability Equipped with a double-sided chipbreaker, the insert supports controlled chip formation for common turning operations. Stable chip control reduces risk of workpiece damage and improves surface quality in continuous and slightly interrupted cuts. The 1.2 mm corner radius helps distribute cutting forces and is suitable for general finishing and semi-finishing passes, balancing edge strength with achievable surface integrity. Operational benefits and workflow integration As an ISO-standardised insert, the item is easy to stock and rotate, allowing quick index changes that reduce downtime. The DNMG150612 designation simplifies ordering and inventory management, while the double-sided nature provides cost-efficient use of the cutting edges. For production planners, the combination of predictable wear behaviour, simple clamping and consistent geometry supports higher machine utilisation and more reliable process planning. For application advice or to place an order for the Tungaloy DNMG150612 T6215 insert, contact Metav Werkzeuge for expert guidance and fast delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6944635 Manufacturer SKU: TUN6944635 Material: Cemented carbide Facts ISO designation: DNMG150612 Size: 15 mm Thickness: 6.35 mm Clearance angle: 0° Cutting angle: 55° Corner radius: 1.2 mm Special features Coating/type: CVD-coated carbide (T6215) Plate shape: Rhombic Hole: With hole Hole style: Cylindrical hole Chipbreaker: Double-sided Application: Turning FAQ What materials is this insert designed for? The CVD-coated T6215 grade is developed for machining stainless steels, offering improved wear resistance and stable cutting behaviour in such materials. Which operations suit this insert best? The insert is suitable for external and internal turning; the rhombic geometry and 1.2 mm corner radius make it appropriate for finishing and semi-finishing passes. How does the chipbreaker affect process reliability? The double-sided chipbreaker supports predictable chip formation and better chip evacuation, increasing process stability and contributing to consistent surface quality. What should be checked for holder compatibility? Compatibility depends on form, clearance angle, tolerance class, fixation, size and thickness; ensure the holder accepts the DNMG150612 geometry and the 6.35 mm plate thickness. Is the insert reversible and economy-friendly? Yes — the double-sided design provides two effective cutting edges per index position, improving cost-efficiency and inventory utilisation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T6215 Wendeplatten - Tungaloy
Benefit from a wear‑resistant CVD coating and a compact 55° geometry that together deliver reliable chip control and long tool life for turning operations; order the DNMG150612 T6215 indexable insert via Metav Werkzeuge or ask the consultants for application support. DNMG150612 T6215 indexable insert for turning — CVD‑coated carbide, 55° nose angle, 1.2 mm corner radius (Tungaloy) The DNMG150612 T6215 indexable insert is an ISO‑compliant rhombic turning insert designed for stable external and internal turning applications, especially suited to rostfreier Stahl under steady to mildly interrupted conditions. CVD‑coated for abrasion resistance 55° nose angle for versatile turning 1.2 mm corner radius for edge robustness Double‑sided insert with cylindrical hole Consistent performance for rostfreier Stahl and demanding turning The CVD‑coated cemented carbide composition of the insert provides a hard, wear‑resistant cutting face that supports longer tool life during continuous turning. The T6215 grade is formulated for the abrasion and work‑hardening tendencies of rostfreier Stahl, delivering stable cutting behaviour and improved surface finishes. By combining a robust substrate with a controlled coating, the geometry sustains edge integrity across longer tool cycles, which reduces changeover frequency and contributes to predictable production output. ISO compatibility and secure seating reduce setup variability Manufactured to the ISO series of turning inserts, the DNMG150612 matches standard clamping geometries so that holder compatibility is determined by form, clearance, tolerance class, fixation and thickness. The cylindrical hole and defined 0° clearance angle facilitate consistent clamping and repeatable positioning in compatible toolholders. This predictability shortens setup time, lowers the risk of misalignment and supports process reproducibility — a practical advantage where batch consistency and minimised downtime are priorities. Process efficiency and practical economy through geometry and design A 55° nose angle combined with a 1.2 mm corner radius offers a balance between strength and versatility: enough edge support for heavier feeds while maintaining the profile required for tighter radii. The 6.35 mm plate thickness and double‑sided design provide two usable cutting edges per index, optimising cost per edge and simplifying inventory management. For both external and internal turning, the dedicated chipbreaker and coating synergy promote controlled chip formation, lowering the likelihood of built‑up edge and stabilising cutting forces — factors that directly contribute to improved productivity and component quality. For reliable turning of rostfreier Stahl with Tungaloy’s T6215 grade, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944661 Manufacturer SKU: TUN6944661 Model series: ISO‑Drehwendeschneidplatten Brand: Tungaloy ISO designation: DNMG150612 Grade: T6215 Facts Corner radius: 1.2 mm Nose angle: 55° Clearance angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Special features Material: cemented carbide Coating: CVD‑coated Insert shape: rhombic Hole style: cylindrical hole (with hole) Chipbreaker: double‑sided Typical application: external and internal turning FAQ What materials is this insert best suited for? The DNMG150612 T6215 insert is optimised for machining rostfreier Stahl and performs well under stable to mildly interrupted turning conditions. How does the T6215 grade affect tool life? The T6215 CVD coating increases wear resistance and promotes stable chip control, which typically extends effective tool life on rostfreier Stahl compared with uncoated grades. Is the insert compatible with standard ISO holders? Yes; the DNMG150612 conforms to ISO geometry standards. Compatibility depends on holder form, clearance, tolerance class, fixation, size and thickness. How many cutting edges are available per insert? The insert is double‑sided, providing two usable cutting edges before indexing is required, which improves cost efficiency per edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated cemented carbide grade (T9205) and a precise rhombic 55° geometry to achieve productive turning of steel under stable conditions; compatibility with ISO holders ensures straightforward integration into existing tool systems. Order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. DNMG 150612 T9205 — Turning indexable insert (ISO) by Tungaloy DNMG150612 T9205 is an ISO-format indexable insert designed for productive external and internal turning of steel under stable machining conditions CVD-coated cemented carbide grade T9205 Rhombic 55° insert geometry Double-sided chipbreaker for reduced inventory 1.2 mm corner radius, 6.35 mm plate thickness Consistent productivity for steel turning The combination of a CVD-coated cemented carbide substrate and the T9205 wear grade delivers a hard-wearing cutting edge tailored to higher cutting speeds in stable setups. The chemical vapour deposition (CVD) coating provides a uniform, hard surface layer that improves wear resistance and reduces flank wear during continuous turning of steel, resulting in longer intervals between index changes. For process planners this means fewer tool changes, more predictable cycle times and improved chip control when the correct chipbreaker and insert geometry are selected. Secure seating and repeatable clamping for reliable cycles Designed to ISO norms, the insert's cylindrical hole and defined tolerances permit precise seating in compatible holders and boring bars. The 6.35 mm plate thickness and adherence to ISO form and clearance specifications ensure a stable clamping interface, reducing chatter and vibration. As a result, reproducible part quality and consistent surface finish are achieved across batches, which supports efficient production planning and reduces scrap rates in serial turning operations. Geometry that balances strength and surface quality The rhombic 55° geometry combines accessibility for internal boring with the rigidity needed for external turning. The double-sided chipbreaker design allows use of both faces, improving inventory efficiency and lowering tooling costs per cutting edge. The 1.2 mm corner radius provides a compromise between edge strength and the ability to produce fine surface finishes; a larger radius increases edge robustness, while the chosen radius supports medium-depth finishing passes without sacrificing stability. System integration and practical use in the workshop The insert is supplied as part of a system comprising the ISO insert, a matching external holder or boring bar, and standard clamping elements and screws. Compatibility depends on form, clearance angle (0° free angle), tolerance class, mounting style and plate thickness, so selection of a matching holder is recommended. The DNMG150612 T9205 insert supports efficient tool management through reversible indexing and straightforward replacement, which reduces machine downtime and simplifies logistics for production lines. For reliable productivity with the Tungaloy DNMG150612 T9205 insert, contact Metav Werkzeuge for application advice or to place an order — eMail: info@metav-werkzeuge.com or Telefon: +49 2822 7131930 Technical data Article number: 6785739 SKU: 6785739-Tungaloy Manufacturer SKU: TUN6785739 Manufacturer: Tungaloy Facts Insert designation: DNMG150612 Grade/coating: T9205 (CVD-coated) Corner radius: 1.2 mm Plate thickness: 6.35 mm Insert size: 15 mm Relief angle (free angle): 0° Approach angle: 55° Special features Rhombic insert shape (55°) Double-sided chipbreaker Cylindrical hole for indexed clamping CVD-coated cemented carbide (wear-resistant) Application: Turning (external and internal) Compatible with ISO turning holders FAQ Is this insert suitable for both external and internal turning? Yes. The rhombic 55° geometry and double-sided chipbreaker make the DNMG150612 T9205 insert suitable for both external and internal turning operations under stable machining conditions. Which materials are recommended for this grade? The T9205 CVD-coated grade is optimised for machining steel; it provides wear resistance and stable cutting at higher speeds when the workpiece and setup remain rigid. Does the insert require a special holder? The insert conforms to ISO dimensions; compatibility is ensured by matching holder form, clearance, tolerance class, mounting and thickness. A holder with an appropriate seat for a cylindrical-hole DNMG insert is required. How does the double-sided chipbreaker help in production? A double-sided chipbreaker allows both faces to be used, extending the number of usable cutting edges per insert and reducing tooling inventory and costs. What are the key identifiers for ordering this item? Order using article number 6785739 or SKU 6785739-Tungaloy to ensure the correct DNMG150612 T9205 turning insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide and a double-sided chipbreaker for productive turning of steel; compatible with ISO holders and secure clamping make tool changes reliable. Order directly via Metav Werkzeuge or ask their consultants for application support and availability. DNMG150612 T9205 — Indexable insert for turning (Tungaloy), CVD-coated carbide, 55° rhombic The DNMG150612 T9205 is an ISO rhombic indexable insert designed for productive external and internal turning of steel under stable machining conditions, offering a robust combination of geometry and wear-resistant coating for higher cutting speeds. CVD-coated cemented carbide for wear resistance ISO rhombic DNMG geometry for holder compatibility Double-sided chipbreaker for improved chip control Central cylindrical hole for secure clamping Higher productivity through wear-resistant coating and grade selection The CVD-coated composition and cemented carbide substrate in the T9205 grade deliver notably improved wear resistance for productive turning operations. This coating type builds a hard, thermally stable layer that reduces flank wear at elevated cutting speeds, which in turn extends tool life and lowers the frequency of insert changes. For workshops machining medium to high-strength steel, the combination of coating and substrate enables more consistent tool performance and predictable process windows. Reliable fit and secure clamping for efficient tool exchanges This insert follows the ISO DNMG form and the designation DNMG150612, with a rhombic 55° geometry that ensures compatibility with standard external holders and boring bars. Key dimensions such as 15 mm across the insert, a thickness of 6.35 mm, a corner radius of 1.2 mm, and a 0° clearance angle support repeatable seating and stable cutting conditions. The central cylindrical hole permits firm mechanical fixation and straightforward indexing, reducing set-up time and minimising the risk of misalignment during tool changes. Stable chip formation and surface quality with a double-sided breaker Equipped with a double-sided chipbreaker, this insert promotes chip control and produces stable chips under suited cutting parameters, which benefits both process security and surface finish. The integrated breaker geometry directs and fragments chips reliably during turning, decreasing rework and machine stoppages. Selecting the right chipbreaker and grade pairing is essential for optimising metal removal rate and maintaining consistent part quality in batch production. Integrated system approach for maintenance and long-term use Designed as part of an indexable system, the insert works in concert with a matching holder, backing plate or clamping set and replacement screws to create a robust turning assembly. Routine checks of clamping torque and cutter seating prevent premature damage; keeping spare inserts and fastening parts on hand helps maintain uptime. For applications where machining conditions vary, grading and chipbreaker choices can be adapted to balance economy and performance, making this insert a practical choice for production environments. Contact Metav Werkzeuge for technical advice, stock checks and delivery options for the DNMG150612 T9205 indexable insert; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6785682 SKU: 6785682-Tungaloy Manufacturer SKU: TUN6785682 Name: DNMG150612 T9205 Tungaloy indexable insert Core specifications Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Geometry angle: 55° Features and compatibility Material: cemented carbide Coating: CVD Shape: rhombic DNMG, ISO 150612 Chipbreaker: double-sided Mounting: central cylindrical hole Intended application: turning (external and internal) Suitable workpiece material: steel FAQ What materials is this insert optimised for? The DNMG150612 T9205 indexable insert is optimised for productive turning of steel, with the T9205 grade providing wear resistance suitable for stable machining at elevated cutting speeds. Is the insert compatible with standard DNMG holders? Yes; the ISO DNMG form and the specified dimensions ensure compatibility with standard external holders and boring bars designed for DNMG150612 inserts. How does the chipbreaker design affect performance? The double-sided chipbreaker promotes controlled chip formation, improving process stability and surface finish while reducing the likelihood of chip-related interruptions when using the DNMG150612 T9205 insert. What are the critical dimensions to check before fitting the insert? Verify the insert size (15 mm), thickness (6.35 mm), corner radius (1.2 mm) and the 55° rhombic geometry to ensure proper seating and clearance for the intended holder and operation. Can the insert be indexed to use multiple cutting edges? Yes; the double-sided design allows indexing to a fresh edge, extending productive life within the same insert; correct clamping and torque are essential to maintain repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9205 Wendeplatten - Tungaloy
The combination of a CVD‑coated carbide grade and a double‑sided chipbreaker delivers consistent performance for productive steel turning; compatibility with ISO holders ensures predictable mounting and repeatable results. Order original Tungaloy inserts directly via Metav Werkzeuge or request guidance from our consultants. DNMG 150612 T9205 — Tungaloy turning insert for turning (CVD‑coated carbide) The DNMG 150612 T9205 is an ISO‑standard turning insert engineered for productive external and internal turning of steel, featuring a CVD‑coated carbide grade for higher cutting speeds and robust wear resistance. CVD‑coated carbide for high speeds Wear‑resistant T9205 grade Double‑sided chipbreaker ISO DNMG form, 55° rhombic shape Faster, more consistent steel turning through CVD coating and grade selection The combination of a CVD‑coated surface and a wear‑orientated T9205 grade means longer cutting life when machining steel under stable conditions. Chemical vapour deposition (CVD) applies a thin, hard layer that reduces flank wear and improves thermal resistance; this enables higher cutting speeds while maintaining edge integrity. For workshops seeking reduced tool changes and steadier cycle times, the coating‑plus‑grade pairing offers a tangible productivity uplift while keeping process windows predictable. Secure mounting and ISO compatibility for repeatable setup The ISO DNMG form and the rhombic 55° geometry guarantee compatibility with standard holders when the holder matches in shape, clearance angle, tolerance class, fastening method, size and thickness. The insert is supplied with a cylindrical hole, easing centring and clamping in most standard indexable holders. This standardised interface reduces setup variance and supports reproducible part quality across batches, which is particularly valuable for series production and fixture‑based workflows. Improved chip control and surface finish with tailored geometry A double‑sided chipbreaker combined with a 1.2 mm corner radius balances chip formation and stability; the chipbreaker controls swarf for safer evacuation while the corner radius supports longer edge life and a better surface finish on turned components. The rhombic plate shape allows use of both sides, extending usable edge counts and reducing tooling costs per part. For components requiring consistent dimensional accuracy, the geometry minimises vibration and helps maintain concentricity during turning. Practical selection and application guidance for optimal results Select the chipbreaker and grade according to the specific workpiece material, machining method and machine stability; the T9205 sort is optimised for productive turning of steel at elevated cutting speeds where steady feeds and rigidity are available. When machining less stable setups or mixed materials, a different chipbreaker or a more general‑purpose grade may be preferable. For tailored recommendations on feed, speed and holder selection, Metav Werkzeuge can provide application‑specific parameters and short technical guidance. Contact Metav Werkzeuge for application advice and to source original Tungaloy inserts; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6785710 SKU: 6785710-Tungaloy Manufacturer SKU: TUN6785710 Manufacturer: Tungaloy Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Insert angle: 55° Special features CVD coating Grade: T9205 Material: carbide Rhombic plate, 55° form Double‑sided chipbreaker Cylindrical hole FAQ What materials is this insert best suited for? The DNMG 150612 T9205 insert from Tungaloy is optimised for machining steel under stable cutting conditions and higher cutting speeds. Is the insert reversible and how many cutting edges are available? This rhombic, double‑sided insert provides multiple indexable edges; the DNMG shape allows the use of both sides to extend edge life. Which holders are compatible with this insert? Compatibility depends on matching the ISO DNMG form, clearance angle, tolerance class, fastening method, size and thickness; the cylindrical hole supports standard clamping systems. How does the T9205 grade affect tool life and productivity? The wear‑resistant T9205 carbide grade combined with a CVD coating improves thermal and flank wear resistance, supporting longer tool life and higher productivity in steel turning. Can this insert be used for internal as well as external turning? Yes, the ISO‑standard DNMG form is suitable for both external and internal turning operations when paired with the appropriate holder and tool geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9205 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade and the rhombic 55° geometry for stable, high-speed turning; the double-sided chipbreaker supports consistent chip formation and longer productive runs. Order the DNMG150612 T9205 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150612 T9205 turning indexable insert (rhombic, 55°) — Tungaloy DNMG150612 T9205 is a rhombic, ISO-design insert for productive external and internal turning applications under stable machining conditions, optimised for steel. CVD-coated carbide grade T9205 Rhombic ISO insert, 55° geometry Double-sided chipbreaker for stable chips Compatible with ISO turning holders Precision and durability for higher-speed turning The CVD-coated carbide formulation of this insert, identified as T9205, delivers improved wear resistance compared with uncoated grades, enabling higher cutting speeds in stable setups. The combination of a robust substrate and a protective CVD layer reduces flank wear and preserves the cutting edge during continuous operations, which translates into fewer indexings and longer productive intervals. This characteristic supports efficient material removal rates when machining steel under consistent clamping and rigidity. Consistent chip control preserves surface quality The double-sided chipbreaker is designed to form predictable chips across a range of depths of cut, helping to avoid entanglement and to protect the workpiece finish. The 1.2 mm corner radius spreads cutting forces across a larger edge area, lowering stress peaks and contributing to a steadier cutting action; the result is an improved surface condition and reduced risk of edge chipping in medium to finishing passes. This focused chip management also simplifies chip handling in automated or semi-automated production cells. Straightforward integration with ISO tooling systems Compatibility with standard holders is governed by form, clearance angle, tolerance class, attachment method, size and thickness; the ISO designation and the rhombic form make this insert straightforward to fit into common external holders or boring bars. The cylindrical hole and 6.35 mm thickness provide secure clamping and repeatable seating, while the 55° geometry offers a balance between strength and accessibility in confined features. Such attributes reduce setup time and support predictable tool life in batch or single-part production. For high-productivity turning choose the Tungaloy DNMG150612 T9205 CVD-coated carbide insert — contact Metav Werkzeuge for application guidance or to arrange supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6785665 SKU: 6785665-Tungaloy Manufacturer SKU: TUN6785665 Model series: ISO turning indexable inserts Material: carbide Grade/coating: T9205 (CVD-coated carbide) Application: Turning Manufacturer: Tungaloy Core data Insert designation: DNMG150612 Geometry angle: 55° Corner radius: 1.2 mm Free angle (relief): 0° Thickness: 6.35 mm Size: 15 mm Design & special features Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Suitable for: Steel (productive turning under stable conditions) Compatible system: ISO toolholders (compatibility via form, relief, tolerance, attachment, size, thickness) Schneidstofftyp: CVD-coated carbide FAQ Is this insert suitable for machining steel? The DNMG150612 T9205 insert from Tungaloy is specified for productive turning of steel and is optimised for higher cutting speeds under stable machining conditions. Which toolholders work with this insert? Compatibility is achieved with ISO-standard external holders and boring bars; matching depends on insert form, relief angle, tolerance class, attachment method, size and thickness. How is the insert indexed and how many usable edges are available? The indexable insert is double-sided with a reversible seating; each side can be indexed to present a fresh cutting edge, extending the usable life of the cutting tip. What corner radius and thickness does the insert have? The insert features a 1.2 mm corner radius and a 6.35 mm thickness, providing a balance of strength and accessibility for finishing and medium-pass operations. Does the insert include a chipbreaker and what type is it? Yes, the insert has a double-sided chipbreaker designed to produce stable, controllable chips across typical turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, fracture toughness and ISO compatibility for efficient turning operations; the insert is engineered for continuous to light interrupted cuts and supports stable chip control. Order the genuine insert via Metav Werkzeuge or contact our application consultants for tailored machining advice. DNMG150612 T9215 Tungaloy turning insert – CVD-coated carbide, 55° rhombic The DNMG150612 T9215 is an ISO-compliant rhombic indexable insert designed for external and internal turning tasks, offering a balanced solution for medium-steel machining. CVD-coated carbide grade T9215 ISO DNMG 150612 format 55° rhombic geometry, 0° clearance Double-sided chipbreaker, cylindrical hole Consistent metal removal and higher throughput from a robust grade The CVD-coated carbide composition and T9215 grade combine wear resistance with fracture toughness, delivering predictable performance in medium-steel applications. This balance reduces unplanned tool changes and supports longer uninterrupted runs, which increases overall shop-floor productivity. The 55° rhombic shape provides a stable cutting edge for both external and internal turning, while the 1.2 mm radius helps to distribute cutting forces and improve surface finish. Designed for continuous to slightly interrupted cuts, the insert's properties translate into fewer tool interventions and a steadier production flow. Broad compatibility and straightforward integration into ISO tool systems As an ISO-compliant insert in DNMG 150612 format, compatibility with holders is determined by form, clearance angle, tolerance class, attachment method, size and thickness; this makes the component easy to integrate into established tooling systems. The 6.35 mm thickness and rhombic plate geometry ensure mechanical stability in the clamping seat, reducing vibration and improving repeatability. Typical system configuration comprises the insert, a matched external holder or boring bar, and the appropriate clamping set and replacement screws. Clear specification of these parameters simplifies procurement and shortens machine set-up time. Reliable chip control and material suitability for everyday turning The insert features a double-sided chipbreaker and a cylindrical hole, enabling secure fastening and predictable chip formation under varying cutting conditions. The grade is recommended as a first choice for medium-steel machining because it pairs high abrasion resistance with good edge strength, which is particularly important when productivity and reproducible part quality are priorities. For less-experienced operators, the predictable behaviour of this grade reduces the risk of edge chipping; for process engineers, it offers a dependable basis for parameter optimisation and cost-per-part calculations. For advice on selecting holders or optimising cutting data for Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised recommendations and supply options Technical data Article number: 6772219 Manufacturer SKU: TUN6772219 SKU: 6772219-Tungaloy Model series: ISO-Drehwendeschneidplatten Product name: DNMG150612 T9215 Tungaloy-Wendeplatte Facts Insert format: 150612 Plate size: 15 mm Corner radius: 1.2 mm Thickness: 6.35 mm Clearance angle: 0° Insert angle: 55° Special features Material: carbide Coating / grade: T9215 (CVD-coated carbide) Plate shape: rhombic Hole: with hole, cylindrical hole Chipbreaker: double-sided Typical application: turning (external and internal) Designed for: continuous to light interrupted cuts System build: insert, compatible external holder or boring bar, clamping set and replacement screws FAQ Which materials is this insert recommended for? The DNMG150612 T9215 insert is primarily intended for medium-steel machining; the T9215 grade provides a combination of wear resistance and edge strength suitable for continuous to light interrupted cuts. How is the insert fixed in the holder? The insert uses a cylindrical through-hole for secure fastening; compatibility with a specific holder depends on form, clearance angle, tolerance class, attachment, size and thickness. Can the insert be used for internal turning as well as external turning? Yes, the rhombic geometry and the 55° approach angle make this insert suitable for both external and internal turning operations when installed in an appropriate holder. What are the key dimensional data to check before ordering? Verify the DNMG 150612 format, 15 mm plate size, 6.35 mm thickness and 1.2 mm corner radius to ensure fit and performance in the chosen holder. Is this a single- or double-sided insert? The insert has a double-sided chipbreaker, allowing the cutting edge to be indexed and used on both faces, which extends effective tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide (T9215) and the 1.2 mm corner radius for stable, high-productivity turning of medium steel; order matching ISO inserts and holder components via Metav Werkzeuge or contact our technical team for advice. DNMG 150612 T9215 rhombic ISO turning insert – CVD-coated carbide, 1.2 mm radius (Tungaloy) DNMG150612 T9215 Tungaloy-Wendeplatte is an ISO-format rhombic turning insert designed for external and internal turning of medium steels, offering a balance of wear resistance and edge strength for continuous to slightly interrupted cuts. CVD-coated carbide, high wear resistance ISO rhombic DNMG 150612 form, wide compatibility Double-sided chipbreaker for longer edge life Consistent throughput through wear-resistant cutting edges The combination of CVD-coated carbide and the T9215 grade delivers predictable tool life and high productivity in medium steel machining. The coating improves abrasive wear resistance while the substrate maintains fracture toughness, which is particularly relevant for continuous operations and light interruptions. With a corner radius of 1.2 mm, the insert provides reinforced cutting edges that reduce the risk of chipping under steady feed rates. These technical choices translate into fewer tool changes and more reliable cycle times on production turning centres. Easier setup and reliable system compatibility Designed to the ISO DNMG form, the insert ensures compatibility with a wide range of standard external holders and boring bars when the holder matches form, clearance angle, tolerance class, fixing method, size and thickness. The rhombic DNMG150612 geometry and 6.35 mm thickness support stable clamping, while the double-sided chipbreaker doubles the available cutting edges per insert, lowering per-edge costs and simplifying inventory management. Specifying inserts to this format reduces setup complexity and supports predictable machining routines. Practical material and handling benefits for the workshop The insert is made from carbide with a CVD coating in grade T9215, optimised for medium steel; this means good wear resistance without sacrificing toughness. The 0° clearance and a 55° cutting edge angle suit common turning strategies, while the cylindrical hole provides secure, repeatable clamping. For everyday practice, the insert’s features make it suitable for both external and internal turning tasks where a balance of surface finish and edge stability is required. Handling and indexation are straightforward, enabling quick edge changes and consistent part quality. For reliable, high-productivity turning with genuine Tungaloy inserts, contact Metav Werkzeuge for holder matching and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774087 Manufacturer SKU: TUN6774087 Merchant SKU: 6774087-Tungaloy Item name: DNMG150612 T9215 Tungaloy turning insert Dimensions & geometry Insert size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Cutting edge angle: 55° Hole style: cylindrical hole Chipbreaker: double-sided Materials & application Material: carbide Coating: CVD Grade: T9215 Application: turning (external and internal) Suitable for: medium steel machining System: ISO turning insert, requires compatible holder and clamping set FAQ What materials is this insert suited for? The DNMG150612 T9215 insert is optimised for medium steel machining, combining wear resistance and edge strength for productive turning operations. Is the insert reversible to use multiple cutting edges? Yes, the insert features a double-sided chipbreaker, allowing indexation to a fresh cutting edge and extending usable life per insert. Which holder characteristics determine compatibility? Compatibility depends on the insert form, clearance angle, tolerance class, fixing method, size and thickness; use holders specified for ISO DNMG inserts to ensure secure clamping. What does the T9215 designation indicate? T9215 denotes a CVD-coated carbide grade engineered to balance abrasive wear resistance with fracture toughness for consistent performance in steel turning. How does the 1.2 mm corner radius affect machining? A corner radius of 1.2 mm increases edge strength and is suited to medium steel where a compromise between surface finish and robustness is required; larger radii improve strength but may affect profile detail. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that combines high wear resistance with strong fracture safety, optimising productivity in continuous to lightly interrupted turning of medium steels. Order the Tungaloy indexable insert via Metav Werkzeuge for reliable delivery or consult their specialists for application advice. DNMG150612 T9215 indexable insert for turning — Tungaloy, rhombic 55° geometry, 1.2 mm radius DNMG150612 T9215 is an ISO-format indexable insert designed for external and internal turning operations, offering a balance of wear resistance and edge stability for medium steel machining. CVD-coated carbide grade T9215 for medium steel ISO-standard rhombic 55° insert format 1.2 mm corner radius for increased edge strength Double-sided chipbreaker with cylindrical hole Productivity gains from a wear‑resistant CVD grade The combination of a CVD-coated carbide T9215 grade and the DNMG geometry delivers consistent performance in medium steel turning. High wear resistance reduces frequency of index changes, while good fracture resistance maintains process stability under continuous and slightly interrupted cuts. This yields measurable gains in throughput and tool life, allowing machining cycles to run longer between interventions and supporting higher productivity in serial production. Predictable clamping and seamless ISO interchangeability As an ISO-standard turning insert, the plate ensures straightforward compatibility with matching holders when form, relief angle, tolerance class, fastening, size and thickness are correctly matched. The standardised format reduces setup variability and simplifies tool inventory management. Clear definition of these parameters enables stable seating and repeatable positioning, which translates into predictable part tolerances and consistent surface quality in production runs. Geometry and chip control for reliable surface quality The rhombic 55° geometry with a 1.2 mm corner radius combines rigidity and edge support for finishing and semi-finishing passes. The double-sided chipbreaker promotes controlled chip formation, reducing the risk of entanglement and improving evacuation in turning operations. A cylindrical hole provides secure fixation in compatible holders while the 0° relief angle maintains efficient cutting contact. These design elements together support reliable surface finish and dimensional accuracy on medium-steel components. Practical selection and application guidance Select a chipbreaker and insert grade that match the workpiece material, machining mode and machining stability to fully exploit the advantages of this insert. For interrupted cuts or unstable setups, prioritise the fracture-resistant characteristics of the grade; for uninterrupted finishing, emphasise wear resistance and edge sharpness. If further machining data or holder recommendations are required, technical consultation is available to ensure the insert integrates smoothly into the existing tool system. For tailored application advice or to request availability of the Tungaloy DNMG150612 T9215 indexable insert, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and ordering information. Technical data Article number: 6796040 Manufacturer SKU: TUN6796040 SKU: 6796040-Tungaloy Data Insert designation: DNMG150612 Thickness: 6.35 mm Corner radius: 1.2 mm Geometry angle: 55° Special features Grade/coating: T9215 (CVD-coated carbide) Application: Turning; medium steel Chipbreaker: Double-sided Hole: Cylindrical Shape: Rhombic (55°) Relief angle: 0° FAQ How does the T9215 coating affect performance? The Tungaloy DNMG150612 T9215 indexable insert (SKU 6796040-Tungaloy) uses a CVD coating that improves wear resistance while retaining fracture safety, extending interval between indexing for medium-steel turning. Is this insert compatible with my existing DNMG holder? Compatibility depends on matching form, relief angle, tolerance class, fastening, size and thickness; the DNMG150612 follows ISO format to allow interchangeability with appropriately specified holders. For which machining conditions is this insert optimised? The insert is optimised for continuous to lightly interrupted cutting in medium steels, offering a balance of productivity and edge security thanks to the T9215 grade. Can the DNMG150612 be used for internal turning as well as external turning? Yes, the rhombic 55° shape and secure fixation via the cylindrical hole make this indexable insert suitable for both external and internal turning operations when used with the correct holder. What benefits does the 1.2 mm corner radius provide? A 1.2 mm radius increases edge strength and stability, improving finish and reducing the likelihood of chipping in semi‑finishing and finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated cemented carbide T9215 and the ISO DNMG 150612 geometry delivers stable tool life and reliable chip control for medium steel turning. Choose this solution for consistent productivity in continuous or lightly interrupted cuts and order directly via Metav Werkzeuge or consult the technical team for application advice. DNMG150612 T9215 DNMG 150612 ISO indexable insert for turning — Tungaloy A DNMG150612 T9215 indexable insert engineered for external and internal turning, offering CVD-coated cemented carbide performance for medium steel machining. CVD-coated cemented carbide T9215 ISO DNMG 150612 geometry, 55° approach Double-sided insert with cylindrical hole Optimised for medium steel machining Consistent productivity through wear resistance and toughness The insert combines a CVD-coated surface with a cemented carbide substrate in grade T9215, achieving a balance of wear resistance and fracture toughness that benefits medium steel operations. This results in extended cutting periods between indexings and reduced tool changes, which directly improves machine uptime. For users running continuous or slightly interrupted cuts the stable performance translates into reproducible cycle times and reduced scrap rates, supporting efficient production planning and lower per-part cost. Compatibility and system integration for straightforward setup Designed to fit ISO-specified DNMG holders, the geometry and dimensions guarantee straightforward mechanical compatibility. The ISO DNMG 150612 form, combined with a 55° approach angle and the standard tolerance classes, makes it suitable for common external and internal turning toolholders and boring bars. The presence of a cylindrical hole ensures reliable clamping with standard screws and clamping sets, simplifying inventory and spare-part logistics for workshop environments that favour ISO-standard tooling systems. Practical handling and cost-efficiency in daily use Featuring a double-sided design and a 1.2 mm corner radius, the insert offers two effective cutting edges per face, reducing consumable usage and stock levels. The 6.35 mm thickness and rhombic form provide rigidity and edge support for stable cutting, while the chipbreaker selection aims to produce controllable chips in steel. Fewer indexings and predictable edge life contribute to lower tooling costs per component and make planning maintenance intervals simpler for production managers. Technical clarity for application decisions When selecting the correct variant, consider the substrate and coating interplay: T9215 is intended as a first choice for medium steel where a combination of wear resistance and breakage protection is required. The item is suited for both finishing and robust machining regimes, depending on machine stability and cutting parameters. If holders, clearance angles or clamping types differ in a tool room, check the match against ISO specifications for form, relief angle and plate thickness to ensure secure seating and repeatable results. Contact Metav Werkzeuge for tailored advice on Tungaloy DNMG150612 T9215 indexable inserts and to confirm availability — email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6772265 Manufacturer SKU: TUN6772265 Our SKU: 6772265-Tungaloy Designation: DNMG150612 Grade: T9215 Manufacturer: Tungaloy Core specifications Approach angle: 55° Corner radius: 1.2 mm Thickness: 6.35 mm Inscribed circle (size): 15 mm Free relief angle: 0° Hole: with hole, cylindrical Design & features Material: cemented carbide Coating/grade: T9215 (CVD-coated) Shape: rhombic Hole style: cylindrical hole Chipbreaker: double-sided Application: turning, external and internal Series: ISO turning indexable inserts FAQ Which materials is this insert suitable for? The DNMG150612 T9215 indexable insert is optimised for medium steel machining and performs best in continuous to lightly interrupted cuts thanks to its CVD-coated cemented carbide grade. Is the insert reversible and how many cutting edges are available? This is a double-sided DNMG insert, providing multiple usable edges per index and improving economy by extending the total usable life of each plate. How does the ISO DNMG 150612 designation affect holder compatibility? Compatibility with holders is governed by the ISO DNMG form, relief angle, tolerance class, clamping and plate thickness; the DNMG150612 geometry matches standard DNMG external holders and appropriately sized boring bars. Can this insert be used for internal turning as well as external turning? Yes, the geometry and cylindrical hole clamping allow use in both external and internal turning setups when the correct holder and clearance are chosen. What does the T9215 grade indicate? The T9215 marking denotes a CVD-coated carbide grade tuned for medium steels, offering a compromise between wear resistance and fracture toughness to support productive, reliable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated carbide T9215 grade and a 55° rhombic DNMG geometry for dependable medium‑steel turning and consistent surface finish; the double‑sided chipbreaker and 1.2 mm corner radius further support productivity and edge security. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DNMG 150612 T9215 Tungaloy turning insert — ISO rhombic, 55° main cutting angle The DNMG150612 T9215 is an ISO‑standard rhombic indexable insert designed for external and internal turning, optimised for medium‑grade steel machining. CVD-coated carbide T9215 for wear resistance DNMG 150612 rhombic insert with 55° angle Double-sided chipbreaker for stable cutting Compatible with ISO turning holders Reliable wear resistance for continuous production The insert combines a CVD‑coated surface with a carbide substrate, delivering enhanced wear resistance and thermal stability in continuous to slightly interrupted cuts. The T9215 grade is formulated to balance abrasion resistance with fracture toughness, which means fewer edge failures under demanding feed and speed conditions. As a result, machining cycles for medium‑grade steel can run longer between indexings, supporting higher component throughput and steadier surface quality in batch production. Geometry engineered for stable cuts and simple indexing The rhombic DNMG form with a 55° main cutting angle and a 1.2 mm corner radius provides a robust cutting edge that tolerates moderate interrupted cuts and offers good resistance to chipping. The insert’s 6.35 mm thickness and the cylindrical hole ensure secure clamping in ISO‑standard holders; compatibility depends on form, relief angle, tolerance class, fastening, size and thickness. The double‑sided design means two usable cutting edges per side, enabling economical indexing and reduced tool change frequency on the shop floor. Controlled chip formation and consistent surface finish A deliberately shaped double‑sided chipbreaker aids predictable chip control when turning medium steel, reducing the likelihood of entanglement and ensuring consistent chip flow even at higher material removal rates. Improved chip behaviour shortens downtime for cleaning and increases net operating time, contributing directly to process reliability. The combination of grade and chipbreaker also supports repeatable surface finishes and more predictable tool‑life planning for production engineers. Practical advantages for the workshop environment The ISO conformity of the insert simplifies tool‑holding procurement and spare‑parts management across multiple machines. The CVD coating offers abrasion resistance without sacrificing edge strength, while the robust insert geometry helps absorb variances in setup or tool projection. These characteristics translate into lower overall tooling cost per part and fewer interruptions. For specific holder matching or cutting parameter recommendations, technical consultation is available to ensure the insert selection aligns with the workpiece material and machining strategy. For expert advice on applying the DNMG150612 T9215 Tungaloy insert in your production process and for rapid supply, contact Metav Werkzeuge via info@metav-werkzeuge.com or phone +49 2822 7131930 — our specialists will advise on holder compatibility and cutting data. Technical data Article number: 6773923 SKU: 6773923-Tungaloy Manufacturer SKU: TUN6773923 Model series: ISO turning indexable inserts Designation: DNMG150612 Core specifications Insert size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 55° Relief angle: 0° Materials & features Material: carbide (CVD‑coated) Grade: T9215 Chipbreaker: double-sided Hole: cylindrical hole Application: external and internal turning Use: medium steel machining Compatibility: ISO turning holders (form, relief, tolerance, fastening, size, thickness) FAQ What materials is this insert best suited for? The DNMG150612 T9215 Tungaloy insert is optimised for medium steel machining, providing a balance of wear resistance and toughness appropriate for continuous to slightly interrupted turning. How does the T9215 grade benefit production runs? Tungaloy’s T9215 grade combines CVD coating with a wear‑resistant carbide substrate to extend edge life and maintain surface finish, helping to increase uptime and reduce tool consumable costs. What does DNMG150612 indicate about the geometry? DNMG150612 denotes a rhombic DNMG form with a 55° main cutting angle and the size/thickness specification; the coded designation helps ensure correct holder and seat selection. How does the double‑sided chipbreaker affect machining? The double‑sided chipbreaker provides controlled chip flow and stable cutting behaviour, which reduces interruptions and supports consistent surface quality during turning operations. Is the insert compatible with standard holders? Yes, the insert is ISO‑standard; compatibility with a specific holder is defined by form, relief angle, tolerance class, fastening method, size and thickness, so holders conforming to ISO DNMG seats are generally suitable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated cemented carbide grade that combines high wear resistance with fracture toughness for reliable mid-range steel turning; select the double-sided chipbreaker and size to match holder stability and cutting conditions. Order the insert directly via Metav Werkzeuge or consult the advisors for application support. DNMG 150612 T9215 turning insert (55°) — Tungaloy DNMG150612 T9215 indexable turning insert for medium steel machining, designed for ISO-compatible holders and continuous to slightly interrupted cuts ISO-standard rhombic insert for turning CVD-coated cemented carbide grade T9215 55° cutting geometry for versatile turning Double-sided chipbreaker with cylindrical hole Maximise productivity with a wear-resistant grade The T9215 grade is a CVD-coated cemented carbide developed for medium steel machining, offering a balance of high wear resistance and fracture toughness. This combination reduces unscheduled tool changes and supports higher material removal rates in stable setups, which contributes to measurable productivity gains on batch and serial production. The coating improves surface integrity and extends service intervals while maintaining reliable edge strength for continuous to slightly interrupted cuts. Secure seating and versatile geometry for consistent results As an ISO-standard rhombic insert with a 55° cutting angle and a 1.2 mm corner radius, the design delivers a compromise between strength and finish. The insert is double-sided, providing two usable cutting edges per seat, and is supplied with a cylindrical hole for positive locating and secure clamping in compatible holders or boring bars. Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness, so matching insert and holder geometry is essential for repeatable performance. Practical selection and system integration for production use Integration into a cutting system typically comprises the indexable insert, an appropriate external holder or boring bar, a shim or clamp kit and replacement screws. Choosing the correct chipbreaker and grade according to workpiece material and machining stability ensures extended tool life and consistent results. The insert’s properties make it particularly suited to operations where high throughput and reliability are priorities; selecting the right assembly parts avoids vibration and premature wear, improving overall process security. Contact Metav Werkzeuge for tailored application advice on the Tungaloy DNMG150612 T9215 insert and for information on availability and matching holders — eMail: info@metav-werkzeuge.com | Tel.: +49 2822 7131930 Technical Data Article number: 6796080 SKU: 6796080-Tungaloy Manufacturer SKU: TUN6796080 Model series: ISO turning inserts Material: cemented carbide Facts Corner radius: 1.2 mm Cutting angle: 55° Plate thickness: 6.35 mm Plate size: 15 mm Clearance angle: 0° Special features Grade/coating: T9215 (CVD-coated) Chipbreaker: double-sided Hole: with cylindrical hole Plate shape: rhombic Typical application: turning (external and internal) System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The T9215 grade is intended for medium steel machining, combining wear resistance and fracture toughness to perform well in continuous to slightly interrupted cuts on steel. How does the 55° geometry affect machining? A 55° cutting geometry provides versatile entry conditions and good edge strength, helping to balance surface finish and cutting forces in a variety of turning tasks. Is the insert reversible and how many edges are available? The insert is double-sided, offering two usable edges per side and enabling economical indexing to extend service life. What determines compatibility with a holder? Compatibility is set by insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters with the holder ensures secure clamping and repeatable performance. Can the T9215 grade handle slightly interrupted cuts? Yes, the CVD-coated cemented carbide T9215 is designed to withstand continuous to slightly interrupted cutting conditions while maintaining wear resistance and fracture safety. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
Taking advantage of the combination of CVD-coated carbide grade T9215, precise geometry and reliable chip control results in higher throughput and consistent surface finish; order directly via Metav Werkzeuge or consult our specialists for process optimisation. DNMG150612 T9215 Tungaloy turning insert — CVD-coated carbide, rhombic 55° for turning A DNMG150612 T9215 Tungaloy turning insert engineered for external and internal turning, offering high wear resistance for medium steel machining and stable performance in continuous to lightly interrupted cuts ISO rhombic shape, 55° cutting angle CVD-coated carbide grade T9215 Double-sided chipbreaker for stable chips Suitable for external and internal turning Achieve higher productivity with wear-resistant grade and geometry The combination of CVD-coated carbide and the T9215 grade provides a balance between wear resistance and fracture toughness that is tailored for medium steel machining. This means longer tool life under steady production conditions and fewer insert changes per shift, which directly improves uptime and lowers unit cost. The rhombic geometry with a 55° cutting angle optimises the approach for general turning tasks, while the graded coating reduces abrasive wear during extended cycles. Selecting this carbide grade supports predictable tool life and repeatable results in batch production. Secure chip control and consistent surface quality The double-sided chipbreaker design offers controlled chip formation across typical turning feeds, reducing the risk of entangling chips and improving process stability. Combined with the rhombic plate form and the 55° lead, the insert promotes a stable cutting force vector that helps produce a reliable surface finish and repeatable tolerances. For operations that alternate between continuous and lightly interrupted cuts, the chip control features contribute directly to fewer stoppages and consistent part quality. Where process stability is critical, choosing the appropriate chipbreaker and insert grade is an effective way to mitigate rework. Compatibility, handling and practical dimensions for easy integration Designed as an ISO-format indexable plate, compatibility with a holder depends on form, clearance, tolerance class, fixing, size and thickness. Key measurable characteristics include a plate size of 15 mm, a thickness of 6.35 mm and a corner radius of 1.2 mm, with a cylindrical hole for secure mounting. The zero-degree clearance angle is suited to standard holder geometries, allowing straightforward replacement and predictable seating. Clear information about these dimensions assists in faster tool changing and minimises setup time on the machine, so production can resume with minimal interruption. For tailored advice on applying the Tungaloy T9215 grade in specific turning operations, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for an application consultation Technical data Article number: 6772238 Manufacturer SKU: TUN6772238 Name: DNMG150612 T9215 Tungaloy turning insert Model series: ISO turning indexable inserts Facts Plate size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 55° Clearance angle: 0° Special features CVD-coated carbide (T9215) Rhombic plate form (DNMG) Double-sided chipbreaker Cylindrical hole for mounting Designed for external and internal turning Compatible holder determined by form, clearance, tolerance, fixing, size and thickness Material: carbide FAQ What materials is this insert best suited for? The Tungaloy DNMG150612 T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade T9215 balances wear resistance and toughness for continuous to lightly interrupted cuts. Can the insert be used for internal turning as well as external turning? Yes, the rhombic DNMG form and the chipbreaker design make this insert suitable for both external and internal turning operations when mounted in a compatible holder. What are the key dimensions to check before ordering? Check plate size (15 mm), thickness (6.35 mm), corner radius (1.2 mm) and the presence of a cylindrical hole to ensure proper fit in the intended holder. How does the chipbreaker affect machining stability? The double-sided chipbreaker promotes consistent chip control, reducing the risk of chip entanglement and improving process stability and surface quality during turning. Is this an ISO-standard insert and how does that help tool selection? The insert follows ISO indexable plate standards, which simplifies compatibility checks with holders and streamlines selection for standardised turning systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, stable chip control and ISO compatibility for uninterrupted production. Order the insert directly via Metav Werkzeuge or consult our technical team for holder matching and process recommendations. DNMG150612 T9215 — Tungaloy ISO turning insert, CVD-coated carbide, 55° DNMG150612 T9215 is an ISO-compliant indexable turning insert designed for productive external and internal turning of medium steels. CVD-coated cemented carbide for medium steel DNMG 55° rhombic insert, ISO 150612 1.2 mm corner radius for edge strength Double-sided chipbreaker for reliable chips Cylindrical hole for secure clamping Productive CVD-coated grade for medium-steel turning The T9215 grade is a CVD-coated cemented carbide developed for the mid-range machining of steel where a balance of wear resistance and fracture toughness is required. The coating provides a hard, heat-resistant surface that reduces flank wear and maintains edge integrity under continuous to slightly interrupted cuts, resulting in longer tool life and more consistent component tolerances. This makes the insert particularly suitable for series production where repeatable performance matters. Geometry and clamping that ensure compatibility and stability The rhombic DNMG geometry with a 55° approach angle and a 0° relief ensures versatile turning capability and predictable cutting forces. The insert features a cylindrical hole for positive, repeatable seating in ISO-standard holders; compatibility with a specific holder is governed by form, clearance angle, tolerance class, clamping method, size and thickness. The 6.35 mm thickness and standard 15 mm inscribed size give a robust platform that resists deflection in both external and internal applications. Chip control and process security for efficient machining A double-sided chipbreaker integrated into the cutting face promotes controlled chip formation and evacuation, lowering the risk of built-up edge and improving surface finish. For medium steels, the combination of stable chip formation and the T9215 grade’s resistance to flank wear supports higher cutting data and productivity. Where slight interruptions occur, the grade’s fracture resistance helps maintain production continuity and reduces unexpected tool changeovers. Practical handling and predictable edge life A 1.2 mm corner radius balances edge strength with finish requirements: it reinforces the cutting edge for tougher feeds while still allowing acceptable surface quality on finished parts. The insert’s double-sided nature and standardised geometry simplify inventory management and reduce set-up time during index changes. Compatibility guidance and matching clamping sets are recommended to achieve optimal repeatability and tool life in specific machine-tool-holder combinations. For highly productive turning of medium steels, choose the Tungaloy DNMG150612 T9215 insert and order via Metav Werkzeuge or contact our consultants at Metav Werkzeuge for holder compatibility and cutting data recommendations: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6772271 Manufacturer SKU: TUN6772271 Model series: ISO indexable turning inserts Material: cemented carbide Grade/coating: T9215 (CVD-coated) Facts Size (inscribed circle): 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Insert angle: 55° Relief angle: 0° Special features Rhombic insert profile (DNMG150612) Cylindrical hole for clamping Double-sided chipbreaker Designed for external and internal turning Suitable for continuous to slightly interrupted cuts FAQ What materials is this insert best suited for? The Tungaloy DNMG150612 T9215 insert is optimised for machining medium steels, combining wear resistance with toughness for reliable productivity. How does the T9215 coating improve performance? The CVD-coated cemented carbide surface of the T9215 grade increases thermal and abrasive resistance, which reduces flank wear and prolongs usable edge life under production cutting conditions. Will this insert fit my existing ISO holder? Compatibility is determined by insert form, relief angle, tolerance class, clamping method, size and thickness; the DNMG150612 format is ISO-standard and will fit ISO DNMG holders when these parameters match. What benefits does the double-sided chipbreaker provide? The double-sided chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the chance of chip-related interruptions during turning operations. Which SKU should be ordered for this item? Order using manufacturer SKU TUN6772271 or article number 6772271 to ensure the correct Tungaloy DNMG150612 T9215 turning insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
The CVD-coated T9215 grade combined with the ISO rhombic DNMG geometry provides a reliable balance of wear resistance and fracture toughness for productive medium-steel turning. Take advantage of the stable chip control and compatibility with standard ISO holders; order the insert directly via Metav Werkzeuge or consult the technical advisors for application support. DNMG150612 T9215 Tungaloy turning insert — CVD-coated carbide, 55° rhombic geometry A DNMG150612 T9215 turning insert engineered for medium-steel machining, offering robust wear resistance and a double-sided chipbreaker for continuous to slightly interrupted cuts CVD-coated carbide grade T9215 Designed for medium steel turning Rhombic 55° geometry with 1.2 mm radius Double-sided chipbreaker, cylindrical hole Durable cutting performance for medium-steel turning The combination of CVD-coated protection and a wear-resistant carbide substrate delivers extended tool life under sustained production. The insert is optimised for continuous to slightly interrupted cuts, which reduces downtime for tool changes and increases machine uptime. With a balanced mix of wear resistance and fracture toughness, this geometry supports repeatable part quality and predictable tool cycles, helping to lower unit costs per workpiece while maintaining consistent surface finish. Engineered geometry for consistent chip control and stability A 55° rhombic geometry with a 1.2 mm corner radius ensures reliable engagement at the cut and effective load distribution across the cutting edge. The double-sided chipbreaker improves chip formation for medium steels, reducing the risk of entanglement and supporting stable cutting forces. This engineered profile means fewer interruptions for manual chip clearing and a smoother machining process, which translates into higher throughput and reduced cycle-time variability. Practical compatibility and straightforward integration into ISO systems As an ISO-series turning insert, compatibility with holders is defined by form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic DNMG form and the included cylindrical hole allow secure mounting in a wide range of standard external holders and boring bars. Clear identification with the ISO code and the ISO DNMG150612 designation simplifies tool management and helps ensure rapid replacement during production, supporting lean tooling logistics on the shop floor. Productivity gains through material and coating synergy The T9215 grade is tailored as a first choice for medium-steel applications, delivering a combination of good wear resistance and breakage safety that supports higher feed rates and longer cutting intervals. The CVD-coated layer acts as a barrier against abrasive and adhesive wear, while the substrate maintains edge integrity under intermittent loads. The result is measurable productivity—fewer interrupted cycles, more consistent part tolerances, and enhanced overall process stability. Choose the Tungaloy DNMG150612 T9215 insert for optimised medium-steel turning — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and immediate supply Technical data Article number: 6773944 Manufacturer SKU: TUN6773944 SKU: 6773944-Tungaloy Manufacturer: Tungaloy Facts Shape: rhombic (DNMG) ISO designation: 150612 Corner radius: 1.2 mm Geometry angle: 55° Relief angle: 0° Plate size: 15 mm Plate thickness: 6.35 mm Special features Material: carbide Coating: CVD-coated Grade: T9215 Chipbreaker: double-sided Hole: cylindrical hole Typical application: external and internal turning System components: ISO insert, compatible holder or boring bar, shim/clamp set, replacement screws FAQ What materials is the DNMG150612 T9215 insert intended for? The Tungaloy DNMG150612 T9215 insert is designed primarily for medium steel machining; the T9215 grade balances wear resistance and toughness for productive steel turning. Can the insert handle interrupted cuts? The DNMG150612 T9215 is suitable for continuous to slightly interrupted cuts; for heavy interruptions, an alternative grade or geometry may be recommended. How is holder compatibility determined for this ISO insert? Compatibility is defined by form, relief angle, tolerance class, fastening method, size and thickness; the ISO DNMG form and cylindrical hole support secure mounting in standard holders. What type of coating and substrate does this insert use? The insert uses a CVD-coated layer on a carbide substrate, providing abrasion resistance and edge stability for medium-steel operations. Which SKU identifies this product for ordering? Order reference: SKU 6773944-Tungaloy, Manufacturer SKU TUN6773944 for the DNMG150612 T9215 turning insert by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215, a 55° rhombic geometry and a 1.2 mm corner radius for high productivity and consistent tool life in medium-steel turning. Order the DNMG150612 T9215 Tungaloy turning insert directly via Metav Werkzeuge or contact our consultants for machining recommendations. DNMG 150612 T9215 Tungaloy turning insert for turning A DNMG150612 T9215 ISO turning insert engineered for external and internal turning of medium steels with a double-sided chipbreaker and CVD-coated carbide for reliable, high-volume production CVD-coated carbide grade T9215 Designed for medium steel turning Double-sided rhombic insert, 55° cutting angle Precision 1.2 mm corner radius Boosted productivity through high wear resistance The combination of a CVD-coated carbide substrate and the T9215 grade delivers elevated wear resistance while maintaining fracture toughness, enabling longer uninterrupted cutting cycles. This indexable insert is optimised for continuous and slightly interrupted cuts, which reduces machining downtime and tool changes. The coating minimises built-up edge and improves surface finish, translating directly into fewer rework operations and a better cost-to-performance ratio for production runs. Secure clamping and accurate fit for predictable results Compatibility with the toolholder depends on form, relief angle, tolerance class, attachment method, size and thickness; this insert conforms to ISO standards for predictable seating and repeatability. The rhombic plate features a cylindrical hole and a 6.35 mm plate thickness for stable clamping in standard external holders or boring bars. The 0° clearance angle and the 55° cutting geometry ensure a robust cutting edge engagement, which suits medium rigidity setups and helps maintain consistent chip formation under varying cutting forces. Application guidance: where this insert excels Specifically formulated as a first choice for medium steel machining, the grade balances wear resistance with breakage protection to support high productivity. The double-sided chipbreaker promotes reliable chip control across common feeds and depths of cut, while the 1.2 mm corner radius offers enhanced edge strength for roughing and finishing passes. As part of a system comprising the ISO insert, matching external holder or boring bar, and secure clamp set with replacement screws, this plate integrates into existing tool stations with minimal adaptation. Contact Metav Werkzeuge today for tailored advice on toolholder compatibility, cutting parameters and to secure the DNMG150612 T9215 Tungaloy turning insert for your production needs — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: 6772250 Manufacturer SKU: TUN6772250 SKU: 6772250-Tungaloy Facts Corner radius: 1.2 mm Cutting angle: 55° Relief angle: 0° Plate thickness: 6.35 mm Inscribed circle/size: 15 Special features CVD-coated carbide Grade T9215 Rhombic plate form Double-sided chipbreaker Cylindrical hole for positive locating ISO-standard indexable turning insert Intended for external and internal turning FAQ What materials is this insert designed for? The DNMG150612 T9215 Tungaloy turning insert is primarily specified for medium steel machining and performs well under continuous to slightly interrupted cutting conditions. How does the T9215 grade benefit production runs? The T9215 CVD-coated carbide provides a balance of wear resistance and toughness, which supports longer tool life and consistent surface quality during high-productivity operations. Is the insert compatible with standard ISO holders? Yes. The insert follows ISO geometries; compatibility is determined by form, relief angle, tolerance class, attachment and plate thickness—use matching holders and clamps for secure seating. What chip control can be expected from this insert? The double-sided chipbreaker on the DNMG150612 promotes controlled chip formation across a range of feeds, improving evacuation and reducing the risk of chip-related interruptions. Can this insert be used for both roughing and finishing? With a 1.2 mm corner radius and robust coating, the insert suits light to medium finishing and heavier roughing cuts when paired with appropriate cutting parameters and stable setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
Benefit from a combination of high wear resistance, excellent chip control and productive turning performance provided by a CVD-coated carbide grade; secure consistent cuts with a 55° rhombic geometry and a 1.2 mm corner radius. Order the DNMG150612 T9215 insert directly via Metav Werkzeuge or contact our consultants for tailored machining advice. DNMG 150612 T9215 ISO turning indexable insert by Tungaloy — CVD-coated carbide, 55° rhombic DNMG150612 T9215 is an ISO-standard turning insert designed for productive external and internal turning of medium-strength steel, combining toughness with high wear resistance. CVD-coated carbide for wear resistance Double-sided chipbreaker for reliable chips 55° rhombic geometry for versatile turning 6.35 mm thickness, 1.2 mm corner radius Boosted productivity for medium-steel turning The insert is engineered for efficient machining of medium-grade steel. Its CVD-coated carbide T9215 grade balances wear resistance and fracture toughness, enabling stable performance in continuous to lightly interrupted cuts. The double-sided chipbreaker provides predictable chip formation, which reduces downtime for chip management and contributes to a smoother production flow. As a result, cycle times can be shortened while maintaining component quality and tool life. Geometry and dimensions that ensure repeatable accuracy A 55° rhombic geometry with a corner radius of 1.2 mm and 6.35 mm thickness delivers a compromise between strength and accessibility in confined turning applications. The insert’s rhombic form and standardized ISO design make compatibility with ISO holders straightforward when matching form, clearance, tolerance class, fastening and size. The insert features a cylindrical hole for secure mounting and is available in the DNMG150612 footprint for conventional indexable tooling systems. Clear technical advantages for process reliability The material choice of cemented carbide combined with the T9215 coating results in consistent edge stability and extended wear life, particularly in mid-range cutting speeds. The 0° relief angle supports robust cutting edges, while the double-sided configuration offers economical indexability. Together these attributes reduce the frequency of tool changes and support predictable machining results, which is especially valuable in batch production and shop-floor environments seeking repeatability. For detailed application guidance or to arrange supply of original Tungaloy DNMG150612 T9215 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for a prompt, expert consultation and delivery arrangement Technical data Article number: 6774104 Manufacturer SKU: TUN6774104 Brand: Tungaloy Designation: DNMG150612 T9215 Dimensions & geometry Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Geometry angle: 55° Hole: cylindrical Plate form: rhombic Materials & features Material: carbide (cemented carbide) Coating/grade: T9215 (CVD-coated) Chipbreaker: double-sided Application: turning (external and internal) Model series: ISO turning indexable inserts Compatibility: ISO holders by form, clearance, tolerance, fastening, size, thickness Suitable for: medium steel; continuous to light interrupted cuts FAQ What materials is this insert best suited for? The DNMG150612 T9215 insert is optimised for medium-strength steel machining, offering a balance of wear resistance and toughness for continuous to lightly interrupted turning. How does the chipbreaker affect machining? The double-sided chipbreaker on this insert improves chip formation and evacuation, which supports stable cutting and reduces the need for frequent chip clearing. What are the key dimensional details to check for holder compatibility? Check the ISO footprint (DNMG150612), thickness of 6.35 mm, the 15 mm size and the cylindrical hole; compatibility also depends on holder form, tolerance and fastening method. Can this insert handle interrupted cuts? Yes, the T9215 grade is suitable for continuous to light interrupted cuts, providing robust edge stability under moderate interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, robust DNMG geometry and secure clamping features for consistent productivity in medium steel turning; order directly via Metav Werkzeuge or consult our specialists for cutting data and holder compatibility. DNMG 150612 T9215 Tungaloy turning insert — ISO turning insert with CVD-coated carbide for medium steel DNMG150612 T9215 is a precision ISO turning insert designed for efficient external and internal turning in medium steel applications, offering a balanced mix of wear resistance and fracture toughness. CVD-coated grade T9215 for medium steel Rhombic DNMG geometry, 55° cutting angle Double-sided insert with cylindrical hole 6.35 mm thickness, 1.2 mm corner radius Increased productivity through durable coating and geometry The combination of a CVD-coated carbide grade and an optimised DNMG geometry delivers measurable improvements in machining stability and tool life. The T9215 grade is formulated for the demands of medium steel, providing a balance between wear resistance and edge strength that sustains higher cutting volumes in continuous and lightly interrupted cuts. For production environments where repeatable output and reduced changeover are priorities, this insert supports more consistent cycle times and fewer tool changes. Clear compatibility and secure mounting reduce setup risk Compatibility with toolholders is determined by form, relief angle, tolerance class, fastening method, size and thickness; the rhombic DNMG150612 form and the 55° approach angle make the insert suitable for a wide range of ISO external and internal turning holders. The cylindrical hole and standard fixing allow reliable clamping in matched seats, while the 6.35 mm plate thickness contributes to rigidity under load. Using the correct holder and underlay ensures correct seat support and minimises vibration, directly improving surface finish and repeatability. Edge preparation and chip control for consistent results A 1.2 mm corner radius provides robustness at the cutting edge, reducing the likelihood of micro-chipping when machining interrupted features or harder zones. The double-sided chipbreaker design enables economical indexing and predictable chip formation; selecting the appropriate chipbreaker and feed range for the workpiece stability and machining strategy ensures efficient evacuation and protects the cutting edge. Explained simply: the right chip control reduces rework and improves downstream process reliability. Practical application guidance and process benefits Intended primarily for turning of medium steels, this insert performs well in continuous to slightly interrupted cuts where productivity and component quality are required. The insert’s profile and Tungaloy CVD coating suit operations where a combination of abrasion resistance and toughness is needed. For best results, pair the insert with a holder rated for the DNMG form, ensure proper seat support and select cutting parameters matched to the workpiece material and rigidity of the setup. For questions on optimised cutting data or holder matching, technical advisors can supply tailored recommendations. Contact Metav Werkzeuge for tailored cutting data, availability and to discuss the best holder pairing for Tungaloy DNMG150612 T9215 turning inserts Technical data Article number: 6772276 SKU: 6772276-Tungaloy Manufacturer SKU: TUN6772276 Model series: ISO-Drehwendeschneidplatten Core specifications Grade: T9215 Material: Carbide Coating: CVD Geometry: DNMG150612 Corner radius: 1.2 mm Relief angle: 0° Plate thickness: 6.35 mm Insert size: 15 Cutting angle: 55° Design / Special features Rhombic plate form Double-sided chipbreaker Cylindrical hole ISO-standard insert Application: Turning Suitable for medium steel machining FAQ What materials is this insert best suited for? The Tungaloy DNMG150612 T9215 turning insert is optimised for medium steel machining, combining wear resistance and fracture toughness for high-productivity turning applications. Is the insert reversible or indexable? This DNMG-style insert is double-sided and indexable; both sides present cutting edges, allowing economical reuse by rotation and indexing. Which holders are compatible with this geometry? Compatibility depends on the holder’s DNMG seat form, relief angle, tolerance class and clamping method; Metav Werkzeuge can advise on suitable ISO external and internal turning holders for this insert. How does the T9215 grade affect machining performance? The T9215 CVD-coated carbide grade enhances abrasion resistance while maintaining edge stability, supporting longer tool life and consistent component quality in medium steel turning. What role does the 1.2 mm corner radius play in operation? A 1.2 mm corner radius increases edge robustness, improving performance in interrupted cuts and contributing to a stable surface finish on turned parts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable edge stability result in consistently productive medium‑steel turning; the CVD‑coated carbide T9215 grade delivers both wear protection and fracture resistance while the rhombic 55° geometry ensures versatile external and internal turning compatibility — order directly via Metav Werkzeuge or consult their specialists for application advice. DNMG150612 T9215 indexable insert for turning — CVD‑coated carbide, rhombic 55° (Tungaloy) DNMG150612 T9215 is an ISO‑standard indexable insert for turning, designed for productive machining of medium steels with a balance of wear resistance and toughness CVD‑coated carbide grade T9215 Optimised for medium steel machining Double‑sided chipbreaker for consistent chips Rhombic 55° geometry for versatile turning 1.2 mm corner radius and 6.35 mm thickness Proven productivity for medium‑steel turning The CVD‑coated carbide composition provides a controlled combination of abrasion resistance and fracture toughness, making it an economical choice for sustained production. Specified as T9215, the grade is tuned for medium steel applications and performs well under continuous and lightly interrupted cuts, which leads to reduced downtime caused by tool change. By prioritising edge stability and heat resistance, the insert supports higher cutting parameters than uncoated grades, enabling measurable increases in cycle throughput and consistent component quality. Secure clamping and system compatibility for reliable results Compatibility with toolholders is determined by insert shape, relief angle, tolerance class, clamping method, size and thickness. The 55° rhombic geometry and standard ISO designation permit straightforward selection of a matching external holder or boring bar; the cylindrical hole ensures positive axial location where required. This design approach reduces setup ambiguity and promotes repeatable positioning. For workshops seeking predictable repeatability, the combination of standardised form and tolerance control minimises the risk of misfit and vibration, thereby protecting tool life and surface finish. Chip control and edge geometry that aid process stability Equipped with a double‑sided chipbreaker, the insert delivers uniform chip formation across a range of feeds and depths, supporting efficient chip evacuation and minimising rework. The 1.2 mm corner radius provides a robust cutting edge that resists chipping while producing acceptable surface integrity on turned components. These characteristics make the insert suitable for finishing and medium roughing passes where steady forces and controlled cutting volumes are essential to maintain cycle consistency and dimensional repeatability. Practical selection and machining guidance Selection of the correct variant should match workpiece material, cutting regime and machine stability. The 6.35 mm thickness contributes to stiffness in the cutting zone and simplifies clamping decisions when paired with compatible ISO holders. For interrupted cuts, the T9215 grade’s fracture resistance is beneficial; for continuous high‑speed operations, the coating’s thermal stability supports elevated parameters. Where optimal tool life is the priority, matching feed, depth and coolant strategy to the insert’s properties will deliver the best cost‑per‑part outcome. For reliable production machining with Tungaloy T9215 inserts, contact Metav Werkzeuge for stock availability and tailored technical advice at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 6772244 Manufacturer SKU: TUN6772244 Model series: ISO‑Drehwendeschneidplatten Grade: T9215 Material: Hartmetall SKU: 6772244-Tungaloy Facts Angle: 55° Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Hole: with hole Special features Rhombic insert shape CVD‑coated carbide (T9215) Double‑sided chipbreaker Cylindrical hole For medium steel turning ISO indexable insert FAQ What materials is this insert best suited for? The DNMG150612 T9215 insert is formulated for medium steel work, where the T9215 CVD coating balances wear resistance and fracture strength for productive machining. Which holders are compatible with this insert? Compatibility is determined by form, relief angle, tolerance class, clamping and thickness; the rhombic 55° geometry of the insert matches standard ISO external holders and boring bars designed for DNMG‑type inserts. Does the insert include a locating hole? Yes, the insert is supplied with a cylindrical hole, enabling positive axial location in holders that require a pinned or screw clamping method. What cutting conditions suit this grade? The T9215 grade performs well under continuous to lightly interrupted cuts and is recommended when a balance of tool life and productivity is required rather than extreme finishing or very heavy interruption. How does the chipbreaker affect process stability? The double‑sided chipbreaker produces consistent chip forms over a range of feeds, improving chip evacuation and helping to maintain stable cutting forces and surface quality. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150612 T9215 Wendeplatten - Tungaloy
Efficient turning for medium steels is achieved through the combination of CVD-coated carbide and a double-sided chipbreaker, with a compact 1.2 mm corner radius that supports stable, productive machining; order the insert directly via Metav Werkzeuge or consult the technical advisers if required. DNMG 150612 T9215 — Indexable turning insert for medium steel by Tungaloy DNMG150612 T9215 is an ISO-standard indexable turning insert designed for external and internal turning in medium steel applications, offering robust wear resistance and suitability for continuous to slightly interrupted cuts. CVD-coated carbide for wear resistance Double-sided chipbreaker for versatile cutting ISO geometry for broad holder compatibility 1.2 mm corner radius for balanced strength Consistent productivity for medium-steel turning The CVD-coated carbide grade T9215 is engineered as a first choice for medium steel machining, combining high wear resistance with good fracture toughness to maintain productivity under continuous or slightly interrupted cutting conditions. The insert’s double-sided chipbreaker design helps control chips and reduce downtime by improving chip flow and evacuation. Selecting this insert supports predictable tool life and process stability, which in turn reduces unplanned tool changes and improves overall manufacturing throughput. Secure clamping and ISO compatibility reduce setup risk With an ISO-standard form and a 55° lead angle, the rhomboid insert mates with a wide range of compatible external holders and boring bars. The presence of a cylindrical locating hole ensures reliable positioning and repeatable clamping when used with the correct underlay and clamping set. Because compatibility is governed by form, clearance angle, tolerance class, fixation and plate thickness, this insert integrates smoothly into standard turning systems and simplifies inventory management for workshops running multiple holder types. Technical coating and geometry explained for practical advantages The CVD coating applied to this carbide substrate enhances hardness at operating temperatures and improves resistance to abrasive wear, while the substrate core provides the necessary toughness against chipping. The 6.35 mm plate thickness and 15 mm inscribed circle offer a balance between rigidity and cutting access, and a 0° clearance angle on the insert relates to how the tool engages the workpiece in common turning set-ups. For engineers and shop planners, these specifications translate into measurable benefits: sustained surface finish quality and reduced frequency of insert breakouts when matched to appropriate cutting parameters. Handling, storage and application guidance for reliable results The rhomboid shape and double-sided nature of the insert provide four usable cutting edges per indexable plate, optimising cost per edge in serial production. The 1.2 mm corner radius offers a compromise between stronger cutting-edge support and acceptable surface finish for general turning tasks. For best results in medium steel, pair the insert with a stable external holder, set cutting parameters consistent with continuous cutting, and select the chipbreaker and grade in line with workpiece material and machine rigidity. Routine inspection and controlled tool-change procedures will preserve performance and support predictable production cycles. For high-capacity turning operations choose the Tungaloy DNMG150612 T9215 insert for wear-resistant, productive performance — contact Metav Werkzeuge for order and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6773922 Manufacturer SKU: TUN6773922 SKU: 6773922-Tungaloy Facts Corner radius: 1.2 mm Thickness: 6.35 mm Inscribed circle / size: 15 mm Lead/approach angle: 55° Clearance angle: 0° Special features Carbide substrate with CVD coating (T9215) Rhomboid insert form (DNMG) Double-sided chipbreaker Cylindrical locating hole, with hole ISO-standard indexable turning insert series Intended application: turning Compatible system: insert, external holder/boring bar, underlay/clamp set and replacement screws FAQ What materials is this insert intended for? The DNMG150612 T9215 insert is specified for medium steel machining; the T9215 CVD-coated carbide grade provides wear resistance and toughness suitable for continuous to slightly interrupted cuts in steel. How many cutting edges are available per insert? As a double-sided rhomboid insert, each DNMG plate offers four usable cutting edges through indexing, which optimises cost per edge during serial production. Is the insert compatible with standard ISO holders? The insert follows ISO geometry; compatibility depends on matching form, clearance angle, tolerance class, fixation, size and thickness with the chosen external holder or boring bar. What advantages does the T9215 coating deliver? The T9215 CVD coating increases surface hardness at operating temperature, improving abrasive wear resistance while the carbide core maintains fracture toughness for reliable edge life. Can this insert cope with interrupted cuts? The grade and geometry are suitable for continuous and slightly interrupted cuts; heavier interruptions should be evaluated with appropriate grade and chipbreaker selection to avoid premature edge chipping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com