DNMG 150612 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade designed for robust steel machining and ISO compatibility to ensure stable cutting under varying engagement; order directly via Metav Werkzeuge or ask our consultants for tailored recommendations. DNMG 150612 T9225 – Tungaloy indexable insert for turning (55° rhombic, 1.2 mm) The DNMG150612 T9225 Tungaloy indexable insert is an ISO-standard rhombic turning insert designed for medium to heavy steel machining, offering a robust universal grade with a double-sided chipbreaker and cylindrical hole for secure clamping. ISO-standard rhombic insert, 55° approach angle T9225 CVD-coated carbide for robust steel machining Double-sided with cylindrical hole for secure clamping 1.2 mm nose radius for stable roughing and finishing Stable cutting with a CVD-coated carbide grade The combination of CVD-coated carbide and the T9225 grade delivers predictable wear behaviour and a balance of toughness and hardness for demanding turning work. The coating improves resistance to abrasion while the substrate supports edge stability during fluctuating cutting conditions; this results in longer edge life in many steel operations. For production environments where consistent cycle times and reduced insert changeovers matter, the insert’s material composition directly contributes to reliable performance and lower total tooling cost. Clear compatibility and secure clamping for ISO tool systems Designed as an ISO-standard insert, the DNMG150612 requires a matching holder defined by form, relief angle and tolerance class to ensure correct seating and repeatable results. The double-sided geometry and cylindrical hole enable safe clamping and straightforward indexing, reducing setup time when replacing edges. When selecting a holder, check that the approach angle, plate thickness and mounting interface correspond to the insert’s specifications to maintain cutting stability and avoid premature wear. Suited to medium–heavy steel cutting and interrupted cuts The robust universal grade is intended for medium to heavy steel turning and copes well with slightly interrupted cuts or variable engagement. The integrated chipbreaker supports efficient chip control in many steel grades, meaning fewer interruptions for manual chip clearing and a more predictable machining process. Choosing this insert can increase process robustness in mixed-production environments where workpiece material or cutting conditions vary between batches. Practical geometry for mixed roughing and finishing The 1.2 mm nose radius combined with the 55° approach angle and rhomboid form provides a versatile profile that balances edge strength and surface finish capability. The double-sided design yields two usable cutting edges per side, lowering cost per cutting edge compared with single-sided alternatives. Because the insert is ISO-compliant, stocking and replacement are straightforward, supporting lean tool management and reduced downtime in busy turning shops. Discuss Tungaloy tooling with Metav Werkzeuge for tailored recommendations and secure the DNMG150612 T9225 insert for robust turning applications — contact info@metav-werkzeuge.com or call +49 2822 7131930 for consultancy and supply. Technical details SKU: 6780666-Tungaloy Manufacturer SKU: TUN6780666 Manufacturer article number: 6780666 Model series: ISO-Drehwendeschneidplatten Application: Turning Manufacturer: Tungaloy Dimensions & core data Corner radius: 1.2 mm Approach angle: 55° Relief angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Materials & special features Material: carbide Coating: CVD coating Grade: T9225 (robust universal grade) Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Compatibility: ISO-standard insert, fits matching holders FAQ What materials is this insert suitable for? The DNMG150612 T9225 insert is formulated for medium to heavy steel machining; the T9225 grade and CVD coating support robust performance under variable cutting conditions. Can the insert be used for interrupted cuts? Yes, the robust universal grade and the insert’s geometry are suitable for slightly interrupted cuts and changing engagement, providing greater resistance to edge chipping. How is the insert secured in the toolholder? The insert uses a cylindrical hole and is intended for holders that match the ISO rhombic form, relief angle and plate thickness; the double-sided design aids stable clamping and indexing. How many edges are available per insert? The insert is double-sided, offering multiple usable edges to reduce cost per edge compared with single-sided inserts. Which features aid chip control in steel turning? The integrated double-sided chipbreaker combined with the CVD-coated carbide grade enhances chip formation and control for many steel applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T9225 carbide, ISO‑standard geometry and robust chip control for consistent medium-to-heavy steel turning. Order or request application advice via Metav Werkzeuge to ensure the correct holder compatibility and cutting parameters. DNMG150612 T9225 Tungaloy indexable insert for turning — rhombic 55° geometry A DNMG150612 T9225 indexable turning insert in rhombic form, CVD‑coated carbide designed for robust performance in medium‑to‑heavy steel machining. ISO‑standard DNMG150612 geometry CVD‑coated carbide grade T9225 Rhombic 55° insert with cylindrical hole Double‑sided chipbreaker for reliable chip control Reliable, ISO‑based geometry for consistent production The ISO‑conforming rhombic geometry ensures predictable seating and clamping in standard external and internal turning holders. The DNMG150612 form combines a 55° cutting configuration with a precisely defined clearance geometry, which reduces setup variance and supports repeatable tool positioning. Built as a CVD‑coated carbide insert, this grade prioritises wear resistance while maintaining sufficient toughness for varying engagement conditions. The result is improved process stability and fewer tool changes in continuous production runs. Toughness and chip control where interruptions occur The T9225 grade is formulated as a robust universal option for medium‑to‑heavy steel turning and performs reliably under slightly interrupted cuts. The double‑sided chipbreaker promotes stable chip formation across a range of feeds, while the 1.2 mm radius at the corner helps maintain edge strength and part finish. Combined with the insert’s geometry and coating, these features translate into longer tool life and consistent surface quality when facing fluctuating cutting forces. Practical system compatibility and easy specification Installation requires matching the insert form, relief angle and tolerance class to the chosen clamping system; the insert’s rhombic shape, 6.35 mm thickness and cylindrical hole simplify mechanical locating in standard holders. As an indexable insert, it is supplied double‑sided to extend usable life per index and to reduce inventory complexity. Technical teams can select the appropriate chipbreaker and grade based on workpiece material and stability to achieve the expected productivity gains without extensive trial and error. Contact Metav Werkzeuge for application advice and availability of Tungaloy DNMG150612 T9225 inserts; the team can recommend suitable holders, cutting parameters and delivery options (info@metav-werkzeuge.com, +49 2822 7131930) Technical data SKU: 6780883-Tungaloy Manufacturer article number: 6780883 Model series: ISO‑Drehwendeschneidplatten Label: DNMG150612 T9225 Tungaloy‑Wendeplatte Dimensions and figures Size: 15 mm Thickness: 6.35 mm Cutting angle / lead: 55° Clearance angle: 0° Corner radius: 1.2 mm Materials & special features Material: carbide Coating: CVD‑coated (grade T9225) Shape: rhombic Chipbreaker: double‑sided Hole: cylindrical hole Application: turning (external and internal) Compatibility: ISO‑standard holders; selection depends on form and tolerance FAQ What materials is this insert designed for? The Tungaloy DNMG150612 T9225 insert is tailored for medium‑to‑heavy steel machining and provides improved resistance to wear in such applications. How does the T9225 grade affect tool life? The T9225 CVD‑coated carbide balances wear resistance and toughness, which helps maintain edge integrity and extend usable life under variable cutting conditions. Can this insert be used for interrupted cuts? Yes, the combination of the robust grade and the 1.2 mm radius supports slightly interrupted cuts and applications with changing engagement. What should be considered when selecting a holder? Compatibility is determined by insert form, relief angle, tolerance class, size and thickness; ensure the holder matches the DNMG150612 geometry and clamping method. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150612 T9225 Wendeplatten - Tungaloy
The combination of a CVD‑coated carbide grade tuned for toughness and a standard ISO rhombic form with a 55° cutting angle ensures reliable performance in medium to heavy Stahl turning; the 1.2 mm corner radius supports robust edge strength and controlled chip formation. Order the DNMG150612 T9225 insert directly via Metav Werkzeuge or consult the technical team for application advice. DNMG150612 T9225 Tungaloy turning insert (CVD‑coated carbide, 55°) DNMG150612 T9225 is an ISO‑standard indexable insert designed for external and internal turning in demanding steel applications, offering a balance of toughness and wear resistance for interrupted and variable engagement conditions. DNMG150612 rhombic, 55° geometry CVD‑coated carbide grade T9225 Robust universal grade for medium–heavy Stahl Double‑sided chipbreaker with cylindrical hole Consistent performance where toughness matters The indexable insert provides a robust solution for turning operations that encounter varying engagement and occasional interruptions. The T9225 grade is a CVD‑coated carbide composition optimised for a wide range of Stahl machining tasks, combining wear resistance with increased fracture toughness. This balance reduces the likelihood of edge chipping under unstable cut conditions and supports longer tool life in production environments. The rhombic form and 55° approach angle enable stable cutting forces and predictable toolpath behaviour, which is critical for reproducible component quality. Mounting compatibility and secure clamping for ISO setups Compatibility with toolholders is governed by form, relief angle, tolerance class, fastening, size and thickness; the insert’s ISO designation simplifies selection for standard holders and boring bars. The central cylindrical hole and the plate thickness of 6.35 mm permit secure clamping and consistent seating, reducing micro‑movement that can degrade surface finish. Using the appropriate holder plus matching shim or clamp set ensures optimum contact and torque distribution, which in turn supports consistent cutting performance and tool life. Why the grade and chipbreaker matter The double‑sided chipbreaker is engineered to control chip formation across moderate to heavy cuts, improving evacuation and reducing recut risk. For operations in Stahl, the chip control and the 1.2 mm corner radius deliver a compromise between edge strength and finishing capability: small enough for detail yet large enough to withstand shock loads. The CVD coating adds thermal and abrasive resistance, allowing stable cutting at elevated speeds compared with uncoated variants, which can translate into improved productivity when cutting parameters are optimised. Practical application and process benefits In production and jobbing environments, this insert supports efficient machining cycles by reducing unexpected tool change events and by offering predictable wear progression. The standard ISO format and universal grade facilitate inventory management across multiple machines and workstations. Where repeatability and throughput are priorities, the insert’s combination of geometry, coating and grade enables tighter tolerances and consistent surface quality with fewer operator interventions, contributing to overall process reliability. Contact Metav Werkzeuge for detailed tooling recommendations and to order the DNMG150612 T9225 Tungaloy insert; technical enquiries are welcome via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6780835-Tungaloy Manufacturer SKU: TUN6780835 Manufacturer article number: 6780835 Brand: Tungaloy Core specifications Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 55° Relief angle: 0° Features and applications Coating: CVD‑coated Grade: T9225 Material: carbide Shape: rhombic (DNMG) Chipbreaker: double‑sided Hole: cylindrical Typical use: external and internal turning in Stahl FAQ What materials is this insert suitable for? The DNMG150612 T9225 insert is intended primarily for machining Stahl, offering a universal performance profile for medium to heavy turning tasks. How does the T9225 grade affect cutting performance? Tungaloy’s T9225 is a CVD‑coated carbide grade that balances wear resistance and toughness, allowing stable cutting under variable engagement and lightly interrupted cuts. Is the insert reversible or single‑use? The plate is double‑sided with a chipbreaker on each cutting edge; rotating the insert extends effective edge life before disposal or regrinding. Which holder types are compatible with this ISO insert? Compatibility is based on form, relief angle, tolerance class, fastening method, size and thickness; standard DNMG‑compatible holders and suitable clamp sets are recommended for correct seating. What role does the 1.2 mm corner radius play? A 1.2 mm corner radius increases edge strength and improves resistance to chipping during heavier cuts while maintaining acceptable surface finish capability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150612 T9225 Wendeplatten - Tungaloy
Take advantage of the robust CVD-coated grade and ISO compatibility for reliable medium-to-heavy steel turning; the 1.2 mm corner radius and double-sided chipbreaker ensure stable cutting and cost-effective indexing. Order the DNMG150612 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150612 T9225 Turning insert — rhomboid ISO turning insert, 55° (Tungaloy) A DNMG150612 T9225 indexable insert engineered for external and internal turning, offering a tough CVD-coated cemented carbide grade tailored to variable engagement conditions CVD-coated cemented carbide grade T9225 55° rhomboid geometry with cylindrical hole 1.2 mm corner radius for stable cutting 6.35 mm thickness, double-sided chipbreaker Predictable performance for medium-to-heavy steel turning The insert’s CVD-coated cemented carbide composition provides a balance of wear resistance and toughness suitable for interrupted cuts and fluctuating engagement. The T9225 grade is formulated to deliver consistent tool life under medium-to-heavy steel machining, reducing unplanned tool changes. The 55° rhomboid geometry concentrates cutting forces on a supportive rake face, while the 0° relief angle supplies secure edge engagement; together these characteristics promote steady chip formation and reliable dimensional control for repetitive production runs. Streamlined compatibility and efficient indexable replacement Manufactured to ISO norms, the insert fits holders according to form, relief, tolerance class, fastening and thickness. The cylindrical hole ensures positive locating and repeatable clamping, while the 6.35 mm thickness and double-sided chipbreaker enable two usable edges per side, lowering tooling costs through effective indexing. Clear specification of holder type and clamp arrangement avoids mismatch at setup, shortening downtimes and simplifying inventory by standardising on ISO-compliant components. Improved process economy and machining stability The 1.2 mm corner radius combines edge strength with acceptable surface finish for a broad range of turning tasks; larger radii favour stability on heavy cuts, smaller radii favour finer finishes. With the T9225 grade, wear progression is gradual, which supports predictable maintenance intervals and reduced scrap. This results in measurable process benefits such as higher uptime and fewer reworks—advantages that translate into a better cost-per-part ratio across production batches. Typical uses and practical handling guidance Designed for both external and internal turning, this rhomboid insert performs well when matched to the appropriate chipbreaker and cutting parameters. Select the chipbreaker and grade according to workpiece material and machining stability; consider a more positive chip control for light interrupted cuts and a tougher approach for heavy engagement. When fitting the insert, ensure correct torque on the clamping screw and confirm seat cleanliness; incorrect clamping is a common source of premature edge failure. If further technical details are required, Metav Werkzeuge provides specification support and sample recommendations via email or phone. For tailored advice on using the DNMG150612 T9225 insert in specific turning applications, contact Metav Werkzeuge to discuss suitability, availability and recommended holder combinations Technical data Article number: 6780878 Manufacturer SKU: TUN6780878 SKU: 6780878-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Facts Corner radius: 1.2 mm Thickness: 6.35 mm Plate size: 15 mm Included angle: 55° Relief/clearance angle: 0° Special features ISO designation: DNMG150612 Grade: T9225 (CVD-coated) Plate form: rhomboid Hole: with cylindrical hole Chipbreaker: double-sided Typical application: turning FAQ What materials is this insert intended for? The DNMG150612 T9225 insert is a robust universal grade intended primarily for medium-to-heavy steel turning; the T9225 coating and substrate combination supports variable engagement conditions. How is the insert indexed and secured? The insert features a cylindrical hole for positive locating and is secured by a compatible clamp or screw in an ISO-standard holder; the 6.35 mm thickness and seat geometry ensure repeatable clamping. Can this insert be used for internal as well as external turning? Yes — the rhomboid geometry and chipbreaker make the insert suitable for both external and internal turning operations when paired with an appropriate holder and parameters. What benefits does the T9225 grade offer in production? T9225 provides a balance of wear resistance and toughness, offering predictable tool life, stable chip formation and efficiency in medium-to-heavy steel machining. Which corner radius is fitted and what does it affect? The insert has a 1.2 mm corner radius; this radius improves edge strength and stability, making it suitable for heavier cuts while maintaining acceptable surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide (T9225), a 1.2 mm corner radius and ISO conformity for stable medium-to-heavy turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150612 T9225 Indexable Turning Insert, CVD-coated Carbide – Tungaloy The DNMG150612 T9225 is an ISO-standard indexable turning insert designed for medium to heavy steel turning, offering robust performance where intermittent cuts or variable engagement demand increased toughness. CVD-coated carbide grade T9225 55° rhombic geometry for stable cutting Double-sided chipbreaker for chip control Corner radius 1.2 mm for durable edge strength Consistent productivity under mixed cutting conditions The CVD-coated carbide grade T9225 provides a balance between toughness and wear resistance, making it suited for medium to heavy steel machining where cutting conditions vary. The coating reduces flank wear and thermal degradation, which extends tool life and reduces tool-change frequency. This performance leads to fewer interruptions in production and a predictable process window for planners and operators. Quick integration into ISO tool systems Being an ISO-standard insert, compatibility with commercially available holders is ensured by matching form, clearance angle, tolerance class, fastening and thickness. The 55° rhombic geometry and the insert’s dimensions allow straightforward installation in standard DNMG seats. Reduced setup complexity translates into shorter tool-change times and easier inventory management across machines. Reliable chip control and surface quality The insert’s double-sided chipbreaker and CVD surface treatment help maintain stable chip formation and evacuation during interrupted or continuous cuts. This results in improved surface finish and reduced risk of rework. The combination of geometry and chip control is particularly beneficial when programme stability and repeatable part quality are priorities. Robust edge design for interrupted and heavy cuts A 1.2 mm corner radius increases edge strength and resistance to mechanical shock, which is advantageous when machining roughing passes or when encountering variable workpiece conditions. The robust edge design reduces the likelihood of premature edge chipping, supporting longer series runs and predictable maintenance intervals. For application guidance or to secure DNMG150612 T9225 inserts from Metav Werkzeuge, contact our team for tailored recommendations and availability; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930. Technical data Article number: 6781346 Manufacturer SKU: TUN6781346 SKU: 6781346-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Grade/coating: T9225 (CVD-coated) Application: Turning ISO designation: DNMG150612 Facts Corner radius: 1.2 mm Approach angle: 55° Relief angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Special features Rhombic plate form Double-sided chipbreaker Cylindrical hole ISO-compatible insert for standard holders Robust universal grade for medium to heavy steel Suited to intermittent cuts and variable engagement CVD coating for improved wear resistance FAQ What materials is this insert intended for? The DNMG150612 T9225 insert is intended primarily for medium to heavy steel machining; the CVD-coated carbide grade supports stable cutting under such conditions. Is the insert suitable for interrupted cuts? Yes, the T9225 grade and the 1.2 mm corner radius provide toughness and shock resistance, making the insert appropriate for interrupted cuts and variable engagement. Can this insert be used in standard DNMG holders? Compatibility is determined by form, clearance, tolerance class, fastening, size and thickness; the DNMG150612 designation corresponds to widely used ISO seats and is designed for standard DNMG holders. Is the insert indexable and reversible? The insert is double-sided with a chipbreaker on both faces, allowing indexing to present a fresh cutting edge and to extend service life. How does the insert support surface finish and chip evacuation? The double-sided chipbreaker combined with the CVD coating promotes controlled chip formation and evacuation, which helps to improve surface finish and machining consistency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9225 Wendeplatten - Tungaloy
Benefit from a robust combination of CVD-coated carbide T9225, ISO conformity and a 1.2 mm corner radius for dependable medium-to-heavy turning operations; order directly via Metav Werkzeuge or consult our machining specialists for application-specific recommendations. DNMG150612 T9225 Tungaloy indexable insert — CVD-coated carbide, 1.2 mm radius A DNMG150612 T9225 Tungaloy indexable insert designed for ISO-standard turning applications, suitable for external and internal turning where toughness and repeatable performance are required. CVD-coated carbide grade T9225 ISO-standard rhombic geometry 1.2 mm corner radius for robustness Double-sided chipbreaker, cylindrical hole Consistent performance where cutting conditions vary The CVD-coated T9225 grade provides a balance of toughness and wear resistance, making it suitable for medium-to-heavy steel machining where interrupted cuts or variable engagement occur. The insert’s CVD-coated carbide substrate increases resistance to flank wear while maintaining edge strength; this translates into fewer unexpected tool changes and more predictable cycle times. The rhombic geometry with a 55° cutting angle helps distribute forces evenly at the cutting edge, improving stability in less rigid setups. Simplified toolholder compatibility and fast changeovers Being an ISO-standard insert, the DNMG150612 format ensures straightforward compatibility with a wide range of external holders and boring bars, provided the holder matches form, relief angle, tolerance class, fastening and plate thickness. The double-sided design and the presence of a cylindrical hole allow secure clamping and economical indexability: two cutting edges per side reduce inventory cost per cutting edge and shorten downtime during index changes. Designed to increase productivity in steel turning A corner radius of 1.2 mm blends edge strength with acceptable surface finish in typical steel applications, while the 6.35 mm thickness adds rigidity against vibrational influences. The 0° relief angle on this insert supports stable cutting engagement, especially under moderate feed and depth-of-cut ranges. Selection of the appropriate chipbreaker style and insert grade for the machining task will maximise material removal rates and extend insert life — typical benefits sought in productive turning shops. Practical guidance and application support When choosing an insert configuration, pair the DNMG150612 T9225 with a holder that matches the insert geometry and the intended operating conditions; the right holder, clamping set and screw kit complete the system for safe and precise machining. For further machining data, recommended cutting parameters, or to discuss potential alternatives for different steels or interrupted cuts, contact the Metav Werkzeuge technical team by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored advice. For reliable medium-to-heavy steel turning with the Tungaloy DNMG150612 T9225, contact Metav Werkzeuge for procurement and machining guidance tailored to the application Technical data Article number: 6780990 Manufacturer SKU: TUN6780990 SKU: 6780990-Tungaloy Model series: ISO turning indexable inserts Name: DNMG150612 T9225 Tungaloy indexable insert Core dimensions Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 55° Relief (free) angle: 0° Hole: with cylindrical hole Special features CVD-coated carbide (T9225) Universal grade for medium-to-heavy steel machining Double-sided chipbreaker ISO-standard rhombic insert Compatible with appropriate holder, clamping set and screws FAQ Is this insert suitable for external and internal turning? Yes. The DNMG150612 T9225 Tungaloy indexable insert is specified for both external and internal turning applications when matched with the correct holder and clamping components. What materials is the T9225 grade intended for? The T9225 CVD-coated grade is a robust universal grade designed primarily for medium-to-heavy steel machining where occasional interruption or variable engagement requires increased toughness. How does the double-sided design affect tooling costs? A double-sided insert like this reduces the cost per effective cutting edge and minimises machine downtime by allowing quick index changes, improving overall tool economy. What are the key mounting considerations for reliable operation? Ensure the chosen holder matches the insert’s rhombic form, 55° cutting angle, tolerance class, fastening style, size and 6.35 mm thickness for secure clamping and consistent cutting conditions. Can this insert handle interrupted cuts? Yes, the combination of a tougher CVD-coated carbide grade and a 1.2 mm corner radius is intended to offer resilience under interrupted cuts and fluctuating engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9225 Wendeplatten - Tungaloy
Take advantage of a robust cutting grade and ISO compatibility for consistent mid-to-heavy steel turning; the combination of CVD-coated carbide T9225 and a 1.2 mm nose radius delivers stable cutting and predictable tool life. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150612 T9225 turning insert — Tungaloy CVD-coated carbide, 55° rhombic geometry DNMG150612 T9225 is an ISO‑standard indexable insert for turning applications, designed for medium to heavy steel machining with a focus on toughness under varying engagement conditions ISO DNMG form, 55° rhombic geometry CVD-coated carbide T9225 for steel machining 1.2 mm nose radius for stable profiles Double-sided insert with cylindrical hole Reliable performance for mid-to-heavy steel turning The CVD‑coated carbide T9225 grade provides a balanced mix of hardness and toughness, making this insert suitable for changing cut conditions and intermittently interrupted cuts. As an ISO‑standard DNMG geometry, the component offers predictable seating in compatible holders, while the 1.2 mm nose radius helps maintain consistent surface profile and reduces the risk of built‑up edge. This results in fewer unexpected interruptions and improved process stability during external and internal turning operations. Durable cutting edge and efficient chip control A CVD coating gives the cutting edge enhanced wear resistance at elevated temperatures, extending usable life under heavy sectional cuts. The integrated double‑sided chipbreaker supports reliable chip formation across a range of feed rates, reducing manual intervention and machine downtime. For operations prioritising throughput, the combination of grade and chip control contributes to higher component output and reduced tooling changes per shift. Compatibility and mounting considerations for safe use The insert is ISO‑standardised, so compatibility depends on the holder’s shape, relief angle, tolerance class, fastening method, size and thickness. The rhombic form and central cylindrical hole enable secure clamping in many DNMG‑type holders; users should match the insert to a suitable clamping system with the correct tolerance class. Clear identification of these parameters ensures secure seating, repeatable positioning and consistent cutting geometry from one indexing to the next. Operational benefits for production environments Using a robust universal grade such as T9225 reduces the need to stock numerous specialised grades, while the insert’s geometry and coating promote consistent surface finish and longer edge life. Indexable tooling with predictable performance supports leaner inventory management and more reliable cycle‑time planning. For shops facing variable workpiece conditions, this insert helps maintain productivity without sacrificing process reliability. For dependable turning results with Tungaloy quality, contact Metav Werkzeuge for ordering and application advice—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific steel grades and machining parameters Technical data Article number: 6781296-Tungaloy Manufacturer SKU: TUN6781296 Manufacturer item number: 6781296 Series: ISO‑Drehwendeschneidplatten Core dimensions Nose radius: 1.2 mm Insert size: 15 mm Thickness: 6.35 mm Relief angle: 0° Diamond angle: 55° Design & applications Shape: rhombic (DNMG) Hole: cylindrical, with hole Chipbreaker: double‑sided Coating / grade: T9225 (CVD‑coated carbide) Intended use: Turning (external and internal) Compatibility: determined by form, relief angle, tolerance class, fastening, size and thickness FAQ Is this insert suitable for interrupted cuts and variable engagement? The DNMG150612 T9225 insert is designed as a robust universal grade; the T9225 CVD coating and carbide substrate provide increased toughness for intermittently interrupted cuts and variable engagement conditions. Which workpiece materials are recommended for this grade? The T9225 grade is optimised for medium to heavy steel machining; it is a productive choice when a tougher, more wear‑resistant insert is required for fluctuating cutting conditions. How is the insert mounted and indexed? The insert uses a central cylindrical hole for clamping and is double‑sided, allowing indexing of the cutting edges. Compatibility with a holder depends on matching form, relief angle, tolerance class, fastening, size and thickness. What surface finish can be expected with a 1.2 mm nose radius? A 1.2 mm nose radius balances edge strength and profile definition; it supports good surface finish while providing enough radius to resist edge chipping in heavier cuts. Can this insert be used in both external and internal turning operations? Yes—this ISO‑standard DNMG insert is suitable for both external and internal turning when paired with an appropriately sized and shaped holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9225, a robust 1.2 mm nose radius and a standardised 55° rhombic geometry for consistent performance in medium to heavy steel turning; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150612 T9225 ISO turning insert for medium to heavy steel turning — Tungaloy A DNMG150612 T9225 ISO rhombic indexable insert designed for turning applications, offering a sturdy nose radius and a universal chipbreaker for varied engagement conditions. DNMG 150612 form, 55° cutting geometry CVD-coated carbide T9225 for steel 1.2 mm nose radius for robust edge strength Double-sided chipbreaker, cylindrical hole for secure clamping Higher productivity through a robust universal grade The combination of a CVD-coated carbide substrate and the T9225 grade targets a balance between wear resistance and toughness, which is essential for medium to heavy steel turning. The coating reduces flank wear and improves tool life under variable engagement, while the substrate maintains edge stability when cuts are slightly interrupted. This results in fewer indexings and longer uninterrupted production runs, translating into measurable productivity gains on the shop floor. Geometry and edge design that reduce rework With a 55° rhombic shape and a 1.2 mm nose radius, the insert delivers a stable cutting edge and improved cutting force distribution. The geometry helps to maintain dimensional accuracy and surface finish during external and internal turning operations. The double-sided chipbreaker is optimised for general-purpose steel machining, controlling chip formation to lower the risk of built-up edge and to simplify chip evacuation, which reduces secondary operations and rework time. Fast, reliable setup and secure clamping The insert is ISO-standardised for compatibility with a wide range of external holders and boring bars; compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. The insert includes a cylindrical hole for positive location and repeatable clamping, while the 6.35 mm plate thickness and 15 mm inscribed circle provide the mechanical stability expected in heavier cuts. Clear, standardised mounting reduces setup time and minimises variability between operators. Application guidance and selection tips For general steel turning, the T9225 grade is recommended where interrupted cuts or varying engagement demand additional toughness without sacrificing wear resistance. Select the nose radius and feed to match the required surface finish and component tolerances: the 1.2 mm edge is a good compromise for strength and finish. Where higher surface finish or lighter cuts are needed, consider smaller radii or fine finishing passes. If further material-specific optimisation is required, technical consultation is available to align grade, chipbreaker and cutting data to the machining scenario. For dependable, high-productivity steel turning with the Tungaloy T9225 grade, contact Metav Werkzeuge for stock availability and tailored technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6796081 SKU: 6796081-Tungaloy Manufacturer SKU: TUN6796081 Core specifications ISO designation: DNMG150612 Insert size: 15 mm inscribed circle Thickness: 6.35 mm Nose radius: 1.2 mm Lead/approach angle: 55° Relief angle: 0° Hole style: cylindrical hole Features and materials Carbide substrate, CVD-coated Grade: T9225 (universal, robust) Double-sided chipbreaker Rhombic plate form, with hole Application: external and internal turning of steel FAQ What materials is this insert suitable for? The DNMG150612 T9225 insert is formulated for machining steel; the T9225 grade provides robustness for medium to heavy steel turning. How does the T9225 grade perform with interrupted cuts? The CVD-coated carbide T9225 offers increased toughness compared with purely wear-focused grades, improving resistance to chipping during interrupted cuts. What clamping method suits this insert? The insert uses a cylindrical hole and standard ISO geometry for secure location in compatible external holders and boring bars, ensuring repeatable clamping. Can this insert be used for finishing operations? With its 1.2 mm nose radius, the insert is optimised for general turning; fine finishing may require a smaller radius or a dedicated finishing grade and cutting data adjustments. Is the insert reversible or single-use per edge? This is a double-sided indexable insert, allowing both cutting edges to be used before replacement or re-grading, which supports cost-effective tool life management. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9225 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide toughness and a robust universal grade that keeps turning operations consistent under mixed engagement conditions; order directly via Metav Werkzeuge or ask their technical team for holder compatibility and grade advice. DNMG 150612 T9225 turning insert by Tungaloy — CVD-coated carbide, 55° DNMG150612 T9225 is a rhombic, ISO‑standard insert for precision turning in steel applications, designed to deliver stable cutting behaviour under intermittent cuts and varying engagement. CVD-coated carbide for robust performance Universally suited for medium to heavy steel Rhombic 55° geometry with 1.2 mm nose radius Double-sided chipbreaker, cylindrical hole Reliable performance for steel turning applications The DNMG150612 insert is built from carbide with a CVD-coated surface that balances edge strength and wear resistance for turning operations. The grade provides a predictable tool life in medium to heavy cutting, helping to maintain consistent cycle times. Because the insert is ISO‑format, it integrates with standard turning toolholders where the seat form, clearance angle and thickness match the holder specification, ensuring a secure fit and repeatable positioning for precision components. Grade choice that reduces unexpected downtime The T9225 grade combines toughness with good wear characteristics to tolerate slightly interrupted cuts and variable chip loads. This balance of toughness and wear resistance reduces the frequency of edge failures and regrinds; consequently, machining sequences run longer between tool changes. For manufacturers facing mixed batch sizes or unstable fixturing, selecting this grade supports a lower cost per component through fewer unexpected stoppages and more predictable edge life. Geometry and clamping that support accurate cuts A 55° rhombic geometry with a 1.2 mm nose radius delivers a reliable compromise between form accuracy and strength at the cutting edge. The insert’s 0° clearance and the cylindrical hole mounting style enhance positional stability in compatible holders, while the rhombic shape allows multiple cutting positions when indexing. These geometric features ensure the insert produces consistent surface finishes and dimensional stability on shafts, bores and profiles when used with properly matched ISO turning toolholders. Economical use and simple handling for workshop efficiency The double‑sided chipbreaker design and robust substrate enable indexable use, effectively doubling available cutting edges before disposal. At a thickness of 6.35 mm, the insert offers solid support against vibration, improving chip control and edge life. Together, these properties reduce handling frequency and lower tooling inventory demands. For production environments where repeatability and throughput are priorities, this insert helps sustain output while simplifying maintenance routines. For machining inquiries or to specify suitable holders and grades for particular steels, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to request a quote or technical consultation for the DNMG150612 T9225 insert. Technical data Article number: 6781339 Manufacturer SKU: TUN6781339 Internal SKU: 6781339-Tungaloy Item name: DNMG150612 T9225 Tungaloy insert Facts ISO designation: DNMG150612 Size: 15 mm Thickness: 6.35 mm Nose radius: 1.2 mm Clearance angle: 0° Lead angle: 55° Mounting: with cylindrical hole Special features Grade: T9225 — CVD-coated carbide Geometry: rhombic, double-sided chipbreaker Application: turning, medium to heavy steel Format: ISO turning insert, compatible with ISO holders FAQ What materials is this insert suitable for? The DNMG150612 T9225 insert is formulated for turning steel, offering robustness for medium to heavy machining and intermittent cuts. How is the insert secured in the holder? The insert uses a cylindrical hole for mounting and requires a matching ISO‑type holder seat, correct clearance and fastening to ensure repeatable positioning. What advantages does the T9225 grade provide? T9225 delivers a balance of toughness and wear resistance, making the Tungaloy grade well suited to variable engagement and slightly interrupted cuts in steel turning. Is this insert reversible or single‑use? With a double‑sided chipbreaker and rhombic format, the insert supports indexable use to access multiple cutting edges before replacement. Which toolholders are compatible with this insert? Compatibility depends on the holder’s seat form, clearance angle and size; the ISO DNMG format of this insert aligns it with standard DNMG‑style turning holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9225 Wendeplatten - Tungaloy
Benefit from robust CVD-coated carbide, a 1.2 mm corner radius and ISO conformity for consistent turning performance; order the DNMG150612 T9225 insert directly via Metav Werkzeuge or consult the technical advisors for holder compatibility. DNMG 150612 T9225 indexable turning insert for turning by Tungaloy DNMG150612 T9225 is an ISO-form indexable turning insert designed for medium to heavy steel turning, offering a durable CVD-coated carbide grade for variable engagement conditions. CVD-coated carbide for extended life Universal T9225 grade for mid to heavy steel Rhombic DNMG form with 1.2 mm radius Double-sided chipbreaker with centric hole Dependable cutting under changing engagement conditions The T9225 grade combines a CVD-coated carbide substrate with a composition tuned for toughness and wear resistance, which results in stable chip formation and reliable edge life during interrupted or variable cuts. In practical terms, this means fewer insert changes and more predictable cycle times in mixed-production environments. The coating reduces flank wear while the substrate sustains edge strength, delivering a balance between tool life and consistent surface finish. Geometry that simplifies holder selection and process setup The rhombic DNMG form, with a nominal 15 mm size and 6.35 mm thickness, provides a versatile 55° approach for external and internal turning applications. The 1.2 mm corner radius helps to absorb shock on heavier feeds, while the 0° clearance angle supports flexible cutting strategies. The insert is supplied with a cylindrical hole for positive clamping; compatibility depends on holder form, free angle, tolerance grade and thickness, so matching the insert geometry to the clamping system ensures secure fixation and repeatable positioning. Operational advantages and cost-efficiency on the shop floor Being double-sided and indexable, the insert offers economical utilisation of cutting edges and reduces tooling expenditure per machined part. The combination of the T9225 universal grade and CVD coating promotes process stability across a broad range of steels, lowering scrap risk and improving throughput. For mixed batches or small-lot production where changing entry conditions occur, the grade’s toughness provides a reliable margin against edge chipping while still delivering good surface quality. Contact Metav Werkzeuge to discuss holder compatibility, batch needs and to reserve the DNMG150612 T9225 insert for production optimisation Technical data Article number: 6796041 Manufacturer item number: 6796041 SKU: 6796041-Tungaloy Manufacturer SKU: TUN6796041 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Grade/coating: T9225 / CVD-coated Corner radius: 1.2 mm Insert size: 15 mm Thickness: 6.35 mm Clearance angle: 0° Insert geometry angle: 55° Hole: Cylindrical Special features Rhombic insert form (DNMG) Double-sided chipbreaker Compatible with ISO-standard turning holders Application: Turning (external and internal) Robust universal grade for medium to heavy steel FAQ What materials is this insert suitable for? The DNMG150612 T9225 insert by Tungaloy is intended primarily for medium to heavy steel turning; the T9225 grade offers the toughness required for variable engagement conditions. How does the CVD coating benefit machining? A CVD-coated carbide insert like the DNMG150612 T9225 reduces flank wear and improves edge life, which leads to more consistent surface finishes and extended tool intervals. Is this insert compatible with standard ISO holders? The DNMG geometry is ISO-standard, but compatibility requires matching holder form, free angle, tolerance class, fastening method, size and thickness to ensure secure clamping. How many cutting edges are available per insert? The insert is double-sided and indexable, providing multiple usable edges to extend service life and reduce tooling cost per component. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated carbide grade that delivers consistent performance in medium to heavy steel turning operations; the combination of a 55° rhombic geometry and a 1.2 mm corner radius ensures secure clamping and predictable cutting under mixed and slightly interrupted cuts — order or request advice via Metav Werkzeuge for a seamless integration into existing turning setups. DNMG150612 T9225 Tungaloy indexable turning insert — Turning, ISO DNMG geometry The DNMG150612 T9225 Tungaloy insert is an ISO-compatible rhombic indexable plate designed for external and internal turning where toughness and wear resistance are required CVD-coated carbide grade T9225 for steel 55° rhombic geometry with 1.2 mm corner radius Double-sided chipbreaker and cylindrical hole Durable grade for demanding steel turning The CVD-coated carbide grade T9225 provides a balanced mix of wear resistance and fracture toughness, making it suitable for medium to heavy steel machining and moderately interrupted cuts. The applied coating enhances edge life at the temperatures typical of steel turning, so cycle times remain stable and tool changes are less frequent. This leads to improved process reliability and lower overall tooling expenditure when compared with uncoated grades. The robust substrate also supports repeatable results in shift-to-shift production. Geometry engineered for secure seating and repeatable cuts A 55° geometry in a rhombic DNMG form combines versatility with precise cutting angles for chamfering and finishing passes. The plate’s 1.2 mm corner radius and 0° relief angle give a predictable contact condition at the cutting edge, reducing vibration and workpiece deflection in less rigid set-ups. Compatibility with holders depends on form, relief angle, tolerance class, clamping method, size and thickness; the insert’s 6.35 mm thickness and cylindrical hole ensure secure clamping in standard external holders and boring bars, delivering consistent dimensional accuracy across batches. Improved chip control and extended usable life The double-sided chipbreaker design facilitates effective chip formation and evacuation across a wide range of feed rates, reducing recut and heat concentration at the cutting edge. Being double-sided, the plate offers multiple indexing positions, which extends the usable life before replacement is necessary and improves cost per cutting edge. For practical selection, pair the chipbreaker style and the T9225 grade to the workpiece material and the stability of the machining set-up to achieve optimal surface finish and throughput. Easy integration into existing tooling systems Supplied as an ISO indexable plate, the insert integrates into the common system build of an insert, matching external holder or boring bar, shim/clamp set and replacement screws. The plate is suitable for both external and internal turning operations; when fitting the insert, ensure the holder matches the DNMG form and the tolerance class to maintain clamping precision. The robust, universal character of the grade simplifies tool inventory and supports stand-by stock strategies for small- to medium-batch production. For application guidance, procurement or a detailed recommendation on toolholder matching for the Tungaloy DNMG150612 T9225 insert, please contact Metav Werkzeuge for technical consultation and supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780789-Tungaloy Manufacturer article number: 6780789 Manufacturer SKU: TUN6780789 Model series: ISO turning indexable inserts Facts Geometry angle: 55° Plate size: 15 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Special features Grade/coating: CVD-coated carbide T9225 Plate form: Rhombic (DNMG) Hole style: cylindrical hole Chipbreaker: double-sided Application: External and internal turning FAQ What workpiece materials is this insert best suited for? The Tungaloy DNMG150612 T9225 insert is optimised for medium to heavy steel machining; the CVD-coated carbide grade offers a balance of wear resistance and toughness for reliable performance in steel turning. How is holder compatibility ensured for this DNMG plate? Compatibility depends on the holder matching the DNMG form, relief angle, tolerance class, clamping method, size and thickness; the insert’s 6.35 mm thickness and cylindrical hole support secure clamping in standard DNMG holders. Can the insert handle interrupted cuts? Yes — the T9225 grade is a robust universal sort designed for situations with changing engagement conditions or light interruptions where extra toughness is required. How does the chipbreaker affect performance? The double-sided chipbreaker promotes stable chip formation and evacuation, reducing recut and heat build-up, which helps to maintain surface quality and extend edge life. Which product identifiers should be used when ordering? Refer to the article number 6780789-Tungaloy or the manufacturer SKU TUN6780789 when requesting the DNMG150612 T9225 indexable turning insert for procurement or technical queries. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated cemented carbide grade and a 55° rhombic geometry with a 1.2 mm corner radius for reliable medium to heavy steel turning; enjoy consistent chip control and simplified tool management. Order the insert directly via Metav Werkzeuge or consult our application specialists for integration advice. DNMG150612 T9225 turning insert — ISO turning insert by Tungaloy The DNMG150612 T9225 is an ISO‑standard rhombic, double‑sided turning insert designed for medium to heavy steel turning operations, offering a combination of toughness and stable chip formation for interrupted or variable cutting conditions. CVD-coated carbide grade T9225 55° rhombic insert with 1.2 mm corner radius Cylindrical central hole, compatible with ISO holders Double-sided chipbreaker for medium to heavy steel Longer edge life with consistent cutting performance The CVD coating on the cemented carbide substrate provides a balanced combination of hardness and toughness, which translates into improved wear resistance without sacrificing edge security. For machining steel under medium to heavy cut depths, this composition reduces flank wear and preserves the cutting edge under fluctuating engagement. The T9225 grade has been specified as a robust universal grade that copes well with slightly interrupted cuts, helping to maintain cycle times and minimise unplanned tool changes. Seamless integration into ISO tool systems The rhombic 55° geometry and the cylindrical central hole ensure straightforward compatibility with standard ISO turning holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. With a plate size of 15 mm and a thickness of 6.35 mm, the insert fits common external and internal turning toolholders. The 0° clearance angle and standard ISO designation make selection and replacement simple in established turning tool setups, reducing setup time and avoiding adapter rework. Reliable chip control and adaptable cutting behaviour The double-sided chipbreaker is engineered to produce stable, controllable chips in a range of cutting conditions, improving swarf evacuation and surface finish when stability is adequate. Selecting the appropriate chipbreaker and taking the insert’s 1.2 mm corner radius into account will influence both part geometry and surface quality: a larger radius supports higher feed rates and deeper cuts with improved tool support, while the chipformer design helps avoid long, stringy chips that impede productivity. Cost-efficiency through durability and predictable performance Using a robust universal grade reduces the need for frequent grade changes across mixed production runs. The combination of CVD-coated cemented carbide and a proven chipformer delivers longer intervals between indexings and predictable machining results, which lowers per-part tooling costs and minimises downtime. Backed by a recognised manufacturer, the insert supports reproducible processes and contributes to overall workshop efficiency. Contact Metav Werkzeuge for application-specific recommendations on Tungaloy inserts and to secure stock or technical guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780742 Manufacturer SKU: TUN6780742 SKU: 6780742-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Cemented carbide Dimensions & core data Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Angle: 55° Clearance angle: 0° Design & special features ISO designation: DNMG150612 Grade: T9225 Coating/type: CVD-coated cemented carbide Hole: cylindrical central hole Chipbreaker: double-sided Plate form: rhombic FAQ Which materials is the DNMG150612 T9225 suited for? The DNMG150612 T9225 turning insert (Tungaloy, SKU 6780742‑Tungaloy) is optimised for medium to heavy steel machining; the CVD‑coated cemented carbide grade provides toughness for variable or mildly interrupted cuts. Is the insert compatible with standard ISO turning holders? Yes — the DNMG150612 follows ISO geometry conventions; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness, aided by the cylindrical central hole and rhombic 55° shape. How does the 1.2 mm corner radius affect results? A 1.2 mm radius increases edge support and enables higher feeds and deeper cuts with improved surface finish; it also helps distribute cutting forces to reduce the risk of edge chipping in heavy cuts. What benefits does the T9225 grade offer in production? The T9225 grade delivers robust universal performance, stable chip formation and good wear resistance for a wide range of steels, reducing the frequency of grade swaps and supporting predictable cycle times. How many usable cutting edges are available per insert? The insert is double‑sided with an indexable geometry, providing multiple indexed cutting edges to extend service life before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9235 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide T9235 and a 55° rhombic DNMG geometry that delivers reliable performance in unstable and interrupted turning conditions; order the DNMG150612 T9235 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150612 T9235 Tungaloy indexable insert – CVD-coated carbide, 55° rhombic for turning DNMG150612 T9235 is an ISO-standard rhombic turning insert intended for external and internal turning where toughness and reliable chip control are required. CVD-coated carbide grade T9235 55° rhombic geometry for stable turning Double-sided chipbreaker for flexible use Cylindrical hole for secure clamping Consistent cutting in unstable and interrupted turning The CVD-coated cemented carbide grade T9235 is engineered for toughness rather than maximum speed, making it particularly suitable for lower cutting speeds, interrupted cuts and less stable set-ups. The coating improves wear resistance while the carbide substrate provides fracture resistance; together these characteristics reduce the frequency of edge changes and support a more predictable production flow. For shops machining steel components, this combination translates into fewer scrap parts and more consistent cycle times, which is a clear economic advantage. Geometry and dimensions that support repeatability The DNMG150612 format delivers a 55° rhombic cutting edge with a 1.2 mm corner radius and a plate thickness of 6.35 mm, creating a robust contact area with the workpiece. The insert’s 0° relief influences force direction and contact conditions at the cutting edge; this neutral relief can be advantageous when seeking stable engagement and repeatable results. Compatibility with a holder depends on form, relief angle, tolerance class, fastening and size—ensuring the chosen combination yields secure clamping and repeatable tool indexing. Effective chip control and handling advantages Equipped with a double-sided chipbreaker, this insert supports bidirectional use and a range of feed rates while helping to break chips reliably in typical steel turning tasks. The cylindrical hole and matching clamping system provide positive location and simple replacement, which reduces tool-change downtime. In practice, that means fewer interruptions on the shopfloor and faster throughput when multiple inserts are cycled in a typical turning cell. Practical system considerations for process planners As an ISO-standard turning plate, the DNMG format is part of a modular system comprising the insert, a suitable external holder or boring bar, backing pads or clamp sets, and spare screws. Select the chipbreaker and grade to match workpiece material, machining strategy and machine stability. When these parameters are aligned, the result is a predictable process window, improved tool life and superior surface integrity on turned components. For application guidance or to procure Tungaloy DNMG150612 T9235 inserts, contact Metav Werkzeuge for technical advice and order placement — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: 6786042 SKU: 6786042-Tungaloy Manufacturer SKU: TUN6786042 Model series: ISO-Drehwendeschneidplatten Facts Insert designation: DNMG150612 Corner radius: 1.2 mm Plate thickness: 6.35 mm Geometry angle: 55° Relief angle: 0° Hole: with cylindrical hole Special features Material: cemented carbide Coating: CVD-coated Grade: T9235 Shape: rhombic (55°) Chipbreaker: double-sided Application: turning (external and internal) System components: insert, holder/boring bar, backing/clamp set, replacement screws FAQ What materials is this insert intended for? The Tungaloy DNMG150612 T9235 insert is formulated for machining steel, offering toughness and controlled wear at lower cutting speeds. Can this insert be used for both external and internal turning? Yes; the rhombic DNMG geometry and the double-sided chipbreaker make the insert suitable for both external and internal turning operations. How does the T9235 grade behave in interrupted cuts? T9235 is a tough, CVD-coated cemented carbide grade designed to resist chipping and provide stable performance under interrupted or unstable cutting conditions. What dimensions are critical when selecting a compatible holder? Critical parameters are the insert form, relief (0°), tolerance class, fastening method, inscribed circle (15 mm), thickness (6.35 mm) and the cylindrical hole for clamping; matching these ensures secure and repeatable clamping. Is the chipbreaker suitable for a wide range of feeds? The double-sided chipbreaker supports versatile feed ranges and helps maintain controlled chip formation in typical steel turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9235 Wendeplatten - Tungaloy
Benefit from the combination of CVD‑coated T9235 carbide, robust double‑sided chip control and ISO compatibility for consistent turning performance; order the insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150612 T9235 ISO indexable turning insert for turning applications — Tungaloy The DNMG150612 T9235 is an ISO indexable turning insert designed for general external and internal turning, offering reliable chip control and wear resistance under interrupted cuts and unstable machining conditions. ISO-indexed rhombic insert, 55° lead angle CVD-coated carbide grade T9235 Double-sided chipbreaker for interrupted cuts Cylindrical hole for secure clamping Proven cutting performance under unstable conditions The CVD‑coated T9235 grade is a cemented carbide formulation tailored for machining steel at moderated cutting speeds and when stability is limited. The coating improves wear resistance while the substrate provides toughness, which translates into longer tool life during interrupted cuts and when feed stability varies. As a result, productivity is increased and scrap risk is reduced, because the combination of coating and substrate maintains the cutting edge under shock loading and fluctuating machining forces. Fast mounting and consistent clamping for reliable setups Designed to the ISO series, the insert features a rhombic profile with a cylindrical hole and a standard mounting form that matches ISO holders by form, clearance angle, tolerance and thickness. The double‑sided chipbreaker enables economical index changes and reduces inventory variation. This compatibility shortens setup times, simplifies toolholder selection and helps maintain repeatable clamping force, so changeovers are faster and process stability is easier to achieve on the shop floor. Material choice and geometry for robust turning A corner radius of 1.2 mm provides improved edge strength and surface integrity when roughing or turning with interrupted contact, while the 0° clearance angle supports a positive engagement for many turning operations. The insert’s 6.35 mm thickness and 55° lead geometry deliver a balance between rigidity and accessibility, enabling both external profiling and internal turning where reach and approach are important. This geometry is particularly suited to applications that demand resistance to chipping and repeatable dimensional control. Practical recommendations for shop use For best results with this grade, prefer moderate cutting speeds and adjust feed and depth of cut to suit machine and workpiece rigidity; the T9235 grade excels in operations where stability is limited or cuts are cyclically interrupted. Selecting the appropriate chipbreaker variant and pairing the insert with a correctly rated ISO holder will ensure consistent chip evacuation and extend tool life. For tailored advice on parameters and holder matching, the technical team at Metav Werkzeuge can assist with application‑specific recommendations. Contact Metav Werkzeuge for application advice and to request the genuine Tungaloy DNMG150612 T9235 indexable insert (SKU TUN6785938) for reliable, economical turning solutions Technical data Article number: 6785938 SKU: 6785938-Tungaloy Manufacturer SKU: TUN6785938 Model series: ISO indexable turning inserts Core dimensions Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Lead angle: 55° Clearance angle: 0° Features & compatibility Grade / coating: T9235 (CVD‑coated cemented carbide) Chipbreaker: double‑sided Hole: with cylindrical hole Shape: rhombic (DNMG) Typical application: turning (external and internal) Compatibility: ISO holders by form, clearance angle, tolerance class, fixing, size and thickness FAQ What materials is this insert suitable for? The DNMG150612 T9235 insert is designed primarily for machining steel; the T9235 CVD‑coated cemented carbide offers toughness and wear resistance suited to interrupted cuts and less stable setups. Can the insert be indexed to use both cutting edges? Yes, the insert is double‑sided with a chipbreaker on each face, allowing reversible indexing to extend service life and reduce tooling costs. Which holders are compatible with this insert? Compatibility is determined by ISO geometry: holders matching the DNMG rhombic form, the 55° lead angle and the thickness of 6.35 mm provide secure clamping and correct orientation. What advantages does the CVD coating bring? The CVD coating on the T9235 grade enhances surface hardness and wear resistance while the carbide core supplies edge toughness, delivering predictable performance in interrupted and unstable conditions. Is this insert suitable for internal turning as well as external turning? Yes; the rhombic form and 55° lead angle make the insert versatile for both external profiling and internal turning where access and edge strength are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9235 grade and robust carbide substrate for dependable turning under interrupted or unstable conditions; combine rhombic 55° geometry with a 1.2 mm corner radius for improved edge strength and reliable chip control — order directly via Metav Werkzeuge or consult our specialists for application-specific selection. DNMG 150612 T9235 indexable insert for turning — Tungaloy, CVD-coated carbide The DNMG 150612 T9235 is an ISO-standard rhombic indexable insert for external and internal turning, engineered for steel machining and resilient under interrupted cuts. Rhombic 55° geometry for versatile turning CVD-coated carbide grade T9235 1.2 mm corner radius for robust edge Double-sided chipbreaker, cylindrical hole Reliable performance in unstable turning conditions The DNMG 150612 T9235 insert combines a CVD-coated surface with a tough carbide substrate to deliver consistent cutting under variable conditions. The T9235 grade is formulated for steel at reduced cutting speeds and excels where interrupted cuts or low rigidity would challenge harder, less forgiving grades. The double-sided chipbreaker enhances chip formation and evacuation, reducing the risk of edge damage and unplanned downtime. This configuration supports productive machining by prioritising stability and predictable wear behaviour rather than maximum cutting speed alone. Geometry and edge design that extend tool life A rhombic geometry with a 55° approach angle and a 1.2 mm corner radius gives this insert a balanced combination of strength and versatility. The 55° orientation improves access in shoulder and profiling operations while distributing cutting forces across a larger edge, helping to avoid premature chipping. The insert’s 0° relief angle and a plate thickness of 6.35 mm contribute to stiffness when clamped in a suitable holder, which in turn reduces vibration and improves surface finish. These geometric choices translate into longer effective tool life and fewer indexings per workpiece batch. Designed for straightforward system integration and economical usage This ISO-format insert fits into standard turning systems comprising an ISO-compatible external holder or boring bar, a support shim or clamp set, and replacement fixing screws. Compatibility with a holder is determined by form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and repeatable location. The cylindrical hole allows consistent seating and positive clamping. Selecting the correct chipbreaker and T9235 grade for the workpiece and machining stability reduces cycle interruptions and simplifies tool management, lowering unit manufacturing costs through predictable replacement intervals. For application advice or to reserve DNMG 150612 T9235 inserts from Tungaloy through Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for rapid, practice-focused support. Technical data Article number: 6785830 Manufacturer SKU: TUN6785830 SKU: 6785830-Tungaloy Model series: ISO turning indexable inserts Facts Insert designation: DNMG150612 Angle: 55° Corner radius: 1.2 mm Thickness: 6.35 mm Size: 15 mm Relief angle: 0° Special features Material: carbide Coating/grade: T9235 (CVD-coated) Geometry: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning System: ISO insert, holder, shim/clamp set and replacement screws Compatibility: determined by form, relief angle, tolerance, fastening, size and thickness FAQ Which materials is this insert best suited for? This insert is optimised for steel; the T9235 grade from Tungaloy provides toughness for lower cutting speeds and interrupted cuts, making it suitable where robust edge integrity is required. How is holder compatibility ensured for the DNMG150612 insert? Holder compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; the DNMG150612 conforms to ISO dimensions so matching ISO external holders or boring bars with the correct seat and clamp secures reliable performance. Does the design support interrupted cutting and unstable conditions? Yes, the T9235 CVD-coated carbide grade emphasises toughness and stable chip formation, and the double-sided chipbreaker mitigates the effects of interrupted cuts to reduce edge breakage. Is the insert indexable and easy to replace during production? The rhombic DNMG insert is indexable and provided with a cylindrical hole for consistent clamping; its design facilitates rapid replacement within an ISO turning system, helping to minimise machine downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade and a stable rhombic geometry to improve productivity in unstable turning conditions; order the insert directly via Metav Werkzeuge or consult our specialists for suitability and availability. DNMG 150612 T9235 indexable insert for turning — Tungaloy The DNMG150612 T9235 is an ISO‑standard rhombic indexable insert designed for external and internal turning, offering a tough CVD‑coated carbide grade for demanding steel applications. DNMG 150612 geometry, 55° rhombic insert CVD‑coated carbide grade T9235 for steel Double‑sided chipbreaker for interrupted cuts Cylindrical hole, 6.35 mm thickness Improved process stability with a tough CVD‑coating The combination of a CVD‑coated surface and a carbide substrate gives a pronounced balance between edge security and wear resistance. The T9235 grade is formulated for steel machining at lower cutting speeds and in less stable setups; this means the insert resists chipping during interrupted cuts and retains a productive cutting edge for longer. For production environments where downtime is costly, the result is predictable tool life and fewer unscheduled tool changes, which supports higher overall efficiency. Geometry engineered for consistent surface finish and chip control A rhombic 55° shape with a 1.2 mm corner radius and a double‑sided chipbreaker offers a secure cutting geometry that reduces vibration and improves chip formation. The 6.35 mm thickness and the cylindrical hole allow secure clamping in ISO holders, increasing rigidity at the cutting zone. These features translate into better surface quality and repeatable dimensional results when turning shafts, shoulders or internal diameters under varying stability conditions. ISO compatibility and application guidance for workshop use The insert conforms to ISO dimensions and fits standard indexable holders when form, clearance, tolerance class, fixation, size and thickness are matched. With a clearance angle of 0° and compatibility for both external and internal turning, the insert is a practical choice for job shops and production lines tackling steel components with intermittent cuts. Selecting the correct holder and tightening torque ensures the full benefit of the T9235 grade and the double‑sided chipbreaker is realised while maintaining safe, reliable operation. For precise turning tasks choose the Tungaloy DNMG150612 T9235 insert — contact Metav Werkzeuge for tailored application advice and immediate availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785827 SKU (manufacturer): TUN6785827 SKU: 6785827-Tungaloy Designation: DNMG150612 T9235 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Dimensions & core data Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Insert angle: 55° Hole: cylindrical Features & applications Geometry: rhombic Coating/grade: T9235 (CVD‑coated carbide) Chipbreaker: double‑sided Application: turning (external and internal) Compatibility: ISO insert holders (form, clearance, tolerance, fixation) FAQ What materials is this insert best suited for? The Tungaloy DNMG150612 in grade T9235 is optimised for machining steel, especially where lower cutting speeds and interrupted cuts require a tougher grade. Can the insert be used for both external and internal turning? Yes, the insert is designed for both external and internal turning when paired with the appropriate ISO‑standard holder and correct clamping. How does the chipbreaker benefit interrupted cuts? The double‑sided chipbreaker improves chip control and reduces edge stress during interrupted cutting, helping to prevent chipping and extending tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 T9235 Wendeplatten - Tungaloy
Benefit from the combination of CVD‑coated carbide T9235, a robust double‑sided chipbreaker and ISO compatibility to maintain productivity in unstable turning conditions; order directly via Metav Werkzeuge or consult our specialists for process alignment. DNMG150612 T9235 — ISO indexable turning insert for turning, CVD‑coated carbide by Tungaloy The DNMG150612 T9235 is an ISO rhombic indexable turning insert designed for external and internal turning of steel where interrupted cuts or unstable set‑ups demand a tough grade and reliable chip control. CVD‑coated carbide for improved wear resistance Double‑sided chipbreaker for interrupted cuts Rhombic 55° geometry, 1.2 mm corner radius Cylindrical hole and 6.35 mm thickness for secure clamping Proven performance when stability is limited The DNMG150612 insert combines a CVD‑coated carbide substrate with the T9235 grade, optimised for steel machining at moderate cutting speeds and in more challenging conditions. The CVD coating provides a hard, wear‑resistant surface that delays flank wear and reduces edge breakdown, while the tough substrate resists chipping during interrupted cuts. This balance of hardness and toughness translates into fewer index changes and more consistent component quality, supporting stable cycle times on less rigid lathes. Secure clamping and predictable geometry for repeatable results A rhombic 55° geometry with a 1.2 mm corner radius delivers a clear compromise between strength and form: sufficient radius for robust edge life, yet compact enough for medium‑to‑fine profiles. The insert’s cylindrical hole and 6.35 mm thickness ensure reliable seat and clamp engagement in compatible holders. Because compatibility depends on form, relief angle, tolerance class, attachment style, size and thickness, the system approach—insert, holder and clamp—ensures repeatable tool setting and reduced vibration‑related variability. Chip control and process advantages that lower operational risk The double‑sided chipbreaker is shaped to support efficient fragmentation and evacuation during both external and internal turning. In combination with the T9235 grade, chip control minimises rework risk in unstable cutting scenarios and reduces tool‑to‑tool variability. For shops aiming to cut downtime, this means fewer secondary operations and more predictable tool life, which together improve the overall machining economy and throughput. Practical application guidance for reliable adoption Use this insert for general turning tasks on steel where interrupted cuts occur or where machine rigidity is limited. The 0° relief angle and ISO form suit common external turning and light internal turning operations; pairing the insert with a correctly specified ISO external holder and a matching underlay/fastener set secures the intended performance. For process tuning, select cutting parameters conservatively at first and increase feed or speed only after confirming stable chip formation and consistent surface finish. For application advice or to secure supply of Tungaloy DNMG150612 T9235 indexable inserts, contact Metav Werkzeuge for tailored recommendations and fast delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6785939 Manufacturer SKU: TUN6785939 SKU: 6785939-Tungaloy Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: carbide Grade: T9235 Numbers / Core technical data Inscribed circle: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Geometry angle: 55° Relief (clearance) angle: 0° Special features / Designs CVD‑coated carbide Double‑sided chipbreaker Rhombic plate form Cylindrical hole With hole (cylindrical hole) Intended application: turning Suitable for interrupted cuts and unstable set‑ups FAQ What materials is this insert suitable for? The DNMG150612 T9235 insert is engineered primarily for steel machining; the T9235 grade provides toughness for interrupted cuts and less stable conditions. How does the CVD coating benefit tool life? A CVD‑coated carbide surface increases wear resistance and reduces flank wear on the cutting edge, helping the insert maintain cutting geometry for longer between indexing operations. Is this insert reversible or single‑use per edge? The rhombic ISO design with a double‑sided chipbreaker allows indexing to utilise multiple cutting edges, extending the usable life of each insert before replacement. What should be considered when selecting a holder? Compatibility is dictated by the insert form, relief angle, tolerance class, attachment style, size and thickness; pair the insert with a matching ISO external holder and the correct underlay/fastener set for secure clamping. Can this insert handle heavy interrupted cuts? The T9235 grade is formulated for toughness and good edge stability under interrupted conditions, making it suitable for heavier interruptions than more wear‑focused grades; adjust cutting parameters and clamping rigidity accordingly. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150612 T9235 Wendeplatten - Tungaloy
Take advantage of the robust combination of productivity and stability offered by the CVD-coated T9235 grade and the ISO-compatible rhombic geometry; the result is reliable performance for external and internal turning under interrupted or unstable conditions. Order directly via Metav Werkzeuge or consult the team for application matching and swift delivery. DNMG 150612 T9235 DNMG150612 Tungaloy turning insert — CVD-coated carbide, double-sided chipbreaker The DNMG150612 T9235 is an ISO-standard turning insert designed for external and internal turning applications, offering a tough, CVD-coated carbide grade for lower cutting speeds and interrupted or unstable cutting conditions. CVD-coated carbide grade T9235 Double-sided chipbreaker 55° rhombic geometry 1.2 mm corner radius Increased process reliability for interrupted and unstable cuts The combination of a CVD-coated surface and a tough carbide substrate delivers stable cutting behaviour where chip control and edge security matter. The offered grade is formulated for turning steel at lower speeds and under interrupted cutting, which reduces edge chipping and extends usable life. With a rhombic 55° geometry and a double-sided chipbreaker, the insert provides reliable engagement, helping to maintain consistent cutting forces and minimise vibration. This results in fewer unplanned tool changes and an overall improvement in machine uptime. Improved surface finish and predictable chip control A well-matched chipbreaker and coating minimise built-up edge and support uniform chip formation even when conditions vary. The double-sided chipbreaker aids evacuation of swarf while the coating helps reduce friction and heat at the cutting zone; together these features support a better surface finish and reduce secondary operations. Where a controlled chip shape is required for automated removal or specific downstream handling, the insert’s geometry contributes to predictable swarf behaviour and repeatable results. Compatibility, toolholder selection and simple indexing As an ISO turning insert, compatibility with a toolholder depends on the insert form, relief angle, tolerance class, attachment method, size and thickness. The rhombic plate with a cylindrical hole and 6.35 mm thickness fits common ISO toolholders designed for DNMG-style inserts; the indexable, double-sided design offers rapid corner changes and cost-effective usage. When pairing with a holder, select clamping and underlay components that match the insert’s dimensions and the intended machining stability to exploit the 1.2 mm corner radius and deliver consistent results. For robust turning performance with Tungaloy’s CVD-coated grade T9235 and proven ISO compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability and place an order Technical data Article number: 6785833 Manufacturer SKU: TUN6785833 SKU: 6785833-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Key measurements Corner radius: 1.2 mm Insert angle: 55° Plate thickness: 6.35 mm Plate size: 15 mm Relief (free) angle: 0° Hole: with hole (cylindrical) Design and special features Rhombic plate form Double-sided chipbreaker CVD-coated carbide grade T9235 Cylindrical hole for secure clamping ISO-standard DNMG150612 designation FAQ What materials is this insert best suited for? The DNMG150612 T9235 insert is optimised for machining steel; the T9235 CVD-coated carbide grade performs well at lower cutting speeds and in interrupted or unstable cutting conditions. Is the insert indexable and how many cutting edges are available? The rhombic DNMG format is double-sided and indexable, offering multiple cutting edges that can be rotated or indexed to present a fresh edge without removing the insert. How does the chipbreaker affect swarf control? The double-sided chipbreaker directs chip formation and evacuation to promote predictable swarf shapes, supporting automated removal and reducing the risk of entanglement in unstable cuts. What should be considered when selecting a toolholder for this insert? Compatibility depends on insert form, relief angle, tolerance class, attachment, size and thickness; ensure the holder matches the DNMG form, 6.35 mm thickness and the cylindrical hole for correct clamping and stability. Can the insert handle interrupted cuts and unstable conditions? Yes, the tough CVD-coated grade T9235 and the insert’s geometry were selected specifically to resist chipping and maintain edge life during interrupted and unstable cutting scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150612 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compliance, a sharp uncoated TH10 carbide grade and a robust 1.2 mm corner radius for consistent turning performance and economical tooling stock management. Order or request advice from Metav Werkzeuge to ensure the insert matches the holder and machining task. DNMG150612 TH10 ISO indexable turning insert — Tungaloy, uncoated carbide, rhombic 55° approach angle DNMG150612 TH10 is an ISO‑standard indexable insert for turning, intended for use where a sharp, uncoated carbide edge supports low cutting forces and clean surface results ISO‑compliant DNMG profile Uncoated carbide for low cutting forces Double‑sided chipbreaker design Cylindrical hole for secure clamping Consistent machining performance with a sharp universal grade The uncoated TH10 grade is a sharp, universal cemented carbide intended to reduce cutting forces and improve surface quality when machining non‑ferrous materials. The low edge resistance of this grade helps to lower spindle load and can lead to more stable machining when feed rates are increased. For shops seeking predictable part finish and reduced vibration during light to medium turning tasks, the combination of a sharp cutting edge and a controlled chipbreaker geometry translates into fewer rejects and steadier cycle times. Engineered geometry and secure clamping for repeatable results The DNMG insert follows ISO geometry conventions, with a rhombic shape and a 55° approach angle that suit a wide range of external and internal turning operations. The insert is supplied double‑sided with a cylindrical hole, enabling reliable clamping and simple rotation to a fresh edge, which reduces tooling inventory and changeover frequency. Compatibility with a specific holder depends on shape, clearance angle, tolerance class, attachment method, size and thickness, so the matching of insert and holder is decisive for safe, repeatable performance. Easy selection for non‑ferrous work and low‑force cutting This turning grade is optimised for non‑ferrous applications where a sharp, uncoated edge yields clean surfaces; examples include aluminium and brass components where built‑up edge must be avoided. Choosing the correct chipbreaker style and grade according to workpiece material and process stability maximises tool life and workpiece quality. The insert’s geometry and grade make it particularly suitable for operations requiring low cutting forces, such as finishing passes or delicate parts. Practical dimensions and system compatibility that save time The insert has a corner radius of 1.2 mm and a plate thickness of 6.35 mm, with a nominal plate size of 15 mm, providing a robust cutting edge that tolerates moderate interruption and supports consistent edge life. Its double‑sided design and standardised DNMG form simplify stocking: one insert supplies two usable edges, and the standard dimensions ease selection of seatings, shims and screws as part of the complete tool system. Remember that the holder, underlay and fastening set form the complete assembly for safe use. For technical advice on applying Tungaloy’s DNMG150612 TH10 insert in specific turning processes, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6803608 SKU: 6803608-Tungaloy Manufacturer SKU: TUN6803608 Brand: Tungaloy Core data ISO designation: DNMG150612 Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Approach angle: 55° Design and features Rhombic insert form Double‑sided chipbreaker Cylindrical hole for clamping Uncoated carbide grade TH10 ISO indexable insert for turning Application: Turning FAQ What materials is this insert best suited for? The DNMG150612 TH10 insert is engineered for non‑ferrous materials; the uncoated TH10 carbide grade supports low cutting forces and clean surfaces on aluminium and brass components. How many usable cutting edges are available per insert? This DNMG indexable insert is double‑sided, providing two usable cutting edges per indexable seat before replacement or re‑grinding is required. Which holders are compatible with this ISO insert? Compatibility depends on holder shape, clearance angle, tolerance class, attachment method, size and thickness; the DNMG150612 form and cylindrical hole are compatible with holders designed for ISO‑standard DNMG inserts. What does the 1.2 mm corner radius affect in turning? A 1.2 mm radius provides a balance between edge strength and surface finish: it helps absorb minor interruptions while still enabling a fine surface on finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150616 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade optimised for stainless steels, a 55° rhombic geometry and a robust 1.6 mm corner radius for steady production results; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DNMG150616 AH6225 Tungaloy turning insert — PVD-coated carbide, 55° rhombic The DNMG150616 AH6225 is an ISO rhombic indexable insert designed for external and internal turning, offering a stable cutting edge for medium machining of stainless steels. PVD-coated carbide AH6225 for stainless steel 55° rhombic shape for versatile turning 1.6 mm corner radius for robust edge Double-sided insert with cylindrical hole Consistent performance for stainless steels and mixed conditions The insert uses a PVD-coated substrate of carbide formulated as AH6225, created to balance a sharp cutting edge with durability in variable cutting situations. The coating reduces built-up edge and increases wear resistance, which translates into more stable tool life during medium turning operations on stainless steels. The integrated chip control geometry, specified as double-sided, helps to produce predictable chips and reduces interrupted cuts, supporting smoother cycle times and less downtime for chip clearing. Geometry that combines surface finish and edge security A 55° rhombic profile with a 1.6 mm corner radius gives a practical compromise between edge strength and surface quality. The moderate radius contributes to improved edge robustness under fluctuating cutting forces while still allowing good surface finish on turned components. The insert’s ISO rhombic form is widely supported by standard external holders and boring bars, enabling reliable clamping and repeatable positioning in production settings — a clear advantage when consistency and repeatability are required. ISO compatibility and economical indexing for production environments As an ISO-standard indexable insert, the DNMG150616 fits conventional holders when matched by form, clearance angle and size; the insert features a cylindrical hole and a plate thickness of 6.35 mm, facilitating secure fixing and straightforward replacement. Being double-sided, the insert offers multiple cutting edges per insert which reduces cost per edge and simplifies inventory management. The combination of standard sizing and the universal AH6225 grade supports productive turning of various components without frequent tool changes, increasing machine uptime. Practical application and handling guidance For optimal results select a holder and clamping assembly that matches the insert’s 0° clearance angle and 55° lead geometry, and choose cutting parameters tuned for medium-duty turning of stainless steels. The PVD-coated carbide construction is particularly suitable when encountering variable material batches or mixed production runs, as the coating and substrate combination moderates wear while maintaining cutting performance. Where chip control is critical, the double-sided chipbreaker design helps prevent long, stringy chips and supports safer machining. Contact Metav Werkzeuge for tailored advice on the Tungaloy AH6225 grade, availability and compatibility checks; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations Technical Data Article number: 6947270 Manufacturer SKU: TUN6947270 SKU: 6947270-Tungaloy Model series: ISO-Drehwendeschneidplatten Product name: DNMG150616 AH6225 Tungaloy-Wendeplatte Facts Corner radius: 1.6 mm Plate size: 15 mm Plate thickness: 6.35 mm Approach angle: 55° Clearance angle: 0° Manufacturer article number: 6947270 Special features Material: Hartmetall (carbide) Coating: PVD-coated Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: Drehen (turning) Grade: AH6225 ISO designation: DNMG150616 FAQ What materials is this insert best suited for? The DNMG150616 AH6225 insert is formulated for machining stainless steels and performs well in medium turning applications, benefitting from the AH6225 grade and PVD-coated carbide. How many cutting edges are available per insert? The insert is double-sided and indexable, providing multiple usable edges before replacement and improving cost efficiency per cutting edge. Is the insert compatible with standard ISO holders? Yes, the ISO designation and the rhombic form ensure compatibility with standard holders when matching form, clearance angle and size. What are the key dimensions to check for holder compatibility? Check the plate size (15 mm), thickness (6.35 mm), corner radius (1.6 mm) and the 55° geometry to ensure correct seating and clamping in the chosen holder. Does the PVD coating affect cutting parameters? The PVD-coated surface enhances wear resistance and reduces built-up edge, allowing stable cutting at the recommended medium machining parameters for stainless steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 AH6225 Wendeplatten - Tungaloy
Reliable machining performance, stable edge life and straightforward tool compatibility make the DNMG150616 AH6225 indexable insert a practical choice for mixed turning operations; its PVD-coated AH6225 grade and 1.6 mm corner radius combine wear resistance with secure cutting stability. Order the DNMG150616 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150616 AH6225 Turning indexable insert by Tungaloy — PVD-coated carbide, 1.6 mm radius A DNMG150616 AH6225 rhombic indexable insert designed for external and internal turning, optimised for stainless steels and variable machining conditions. DNMG150616 rhombic 55° insert PVD-coated AH6225 grade for stainless steels 1.6 mm corner radius for stable cutting edges Double-sided chipbreaker, cylindrical hole High-performance grade for reliable stainless steel turning The PVD-coated AH6225 grade combines a sharp, wear-resistant cutting edge with enough toughness for medium cutting depths, offering consistent results across variable conditions. The PVD-coated surface reduces built-up edge and improves wear behaviour, which translates into longer in-process lifetime and fewer index changes. For shops seeking predictable tool life and reduced downtime, this grade balances edge stability and economical material removal. The composition and coating are chosen to manage the specific challenges of machining stainless steels, where heat and adhesion can shorten tool life if the wrong grade is used. Geometry and chip control that protect productivity A rhombic geometry with a 55° included angle and a 1.6 mm corner radius gives a secure cutting profile that resists chipping while maintaining good surface finish on the workpiece. The double-sided chipbreaker is engineered to segment and evacuate chips efficiently, helping to prevent entanglement and to keep cycle times low. The insert’s cylindrical hole and standard dimensions ensure correct clamping and repeatable positioning in ISO-compliant toolholders, reducing set-up errors. In practice, the geometry and chip control reduce rework and contribute to stable process windows for both roughing and finishing passes. System compatibility and easy specification for production planning Designed to ISO standards, this indexable insert fits common external holders and boring bars when matched for form, clearance angle, tolerance class, fastening method, size and thickness. The standardised format simplifies inventory management and tool selection across machines. The carbide substrate and moderate thickness provide rigidity during interrupted cuts and versatile performance across alloys. For engineers planning production runs, the insert’s predictability supports cost-effective batch machining and easier machining parameter standardisation, aiding process security and quality control. For tailored tooling recommendations and fast supply of the DNMG150616 AH6225 Tungaloy indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will advise on holder compatibility and optimal cutting data. Technical data Article number: 6947199 SKU: 6947199-Tungaloy Manufacturer SKU: TUN6947199 Model series: ISO turning indexable inserts Material: Carbide Core specifications Corner radius: 1.6 mm Insert size: 15 mm Thickness: 6.35 mm Clearance angle: 0° Included angle: 55° Design & features Rhombic 55° insert geometry PVD-coated AH6225 grade for stainless steels Double-sided chipbreaker Cylindrical mounting hole ISO-compatible for external and internal turning Suitable for medium machining and variable conditions FAQ What materials is this insert suited for? The DNMG150616 AH6225 insert is formulated for machining stainless steels; the PVD-coated AH6225 grade provides improved wear resistance and adhesion control specifically for such alloys. How many usable edges does the insert provide? This rhombic DNMG insert is double-sided, offering multiple cutting edges per index, which extends the service life before the insert needs replacement. What does AH6225 mean in practical terms? AH6225 denotes a PVD-coated carbide grade tuned for a balance of sharpness and toughness; it is intended for medium-depth cuts on stainless steels and variable machining conditions. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO dimensions and locates via its cylindrical hole and standard thickness, but holder compatibility depends on matching form, clearance, tolerance class, fastening and size. How does the chipbreaker benefit the process? The double-sided chipbreaker fragments and directs chips away from the cut, reducing the risk of entanglement, improving surface finish and maintaining stable cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of reliable mid-range performance, adaptable cutting geometry and proven PVD-coated carbide to keep turning operations productive and predictable. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. DNMG 150616 AH6225 Turning Insert (DNMG150616 AH6225) — Tungaloy The DNMG150616 AH6225 is a rhombic, ISO-standard indexable turning insert designed for general turning of stainless steels, offering a balanced combination of sharpness and edge stability for medium-duty machining. Universal grade for stainless steels AH6225 PVD-coated cemented carbide substrate 55° rhombic geometry for diverse turning tasks Double-sided insert with cylindrical hole 1.6 mm corner radius for consistent profile High-efficiency turning with predictable tool life The combination of a PVD-coated surface and a cemented carbide substrate makes this insert suitable for stable, repeatable results in batch and continuous turning. The AH6225 grade is optimised to maintain a sharp, wear-resistant edge across varying cutting conditions, which contributes to longer tool life and fewer index changes. For production environments seeking throughput without excessive regrinding, this geometry supports efficient chip formation and reliable dimensional control. Geometry and handling benefits that simplify setup Featuring a 55° rhombic shape and a 1.6 mm corner radius, the insert delivers a compromise between strength and finish capability. The double-sided design with a cylindrical hole reduces inventory per toolholder and simplifies replacement procedures, while the ISO standardisation ensures compatibility where form, relief angle, tolerance class, fastening and thickness match the holder. These attributes reduce machine downtime and allow quick adaptation between external and internal turning operations. Application-focused performance for stainless steels Specifically developed as a universal solution for stainless steels, the grade supports medium machining parameters where surface quality and edge stability are required. The integrated chipbreaker geometry is suited to a range of feeds and depths of cut, helping to control chip flow and avoid entanglement. Where material variability or intermittent cuts are encountered, the balanced edge preparation of this grade lowers the risk of premature edge failure compared with uncoated alternatives. Practical considerations for workshop integration As an ISO-specification indexable insert, compatibility with the tooling system depends on correct match of insert form and holder specification. The PVD-coated surface tolerates a variety of cooling strategies; however, recommended cutting data should be validated for the specific stainless grade and machine rigidity. For operations seeking a straightforward, economical insert that combines easy handling with consistent machining results, this option represents a sound choice within mid-range performance classes. Contact Metav Werkzeuge for availability and tailored machining advice on the DNMG150616 AH6225 Tungaloy insert: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6947221 Manufacturer SKU: TUN6947221 Item SKU: 6947221-Tungaloy Model series: ISO turning indexable inserts Designation: DNMG150616 AH6225 Material: cemented carbide Coating: AH6225 PVD-coated Facts Corner radius: 1.6 mm Clearance angle: 0° Insert thickness: 6.35 mm Insert size: 15 mm Cutting angle: 55° Special features Rhombic insert shape Double-sided with cylindrical hole Chipbreaker suited to turning Universal grade for stainless steels Suitable for external and internal turning FAQ What materials is this insert designed for? The DNMG150616 AH6225 insert is specified as a universal grade for stainless steels, providing a balanced edge for medium-duty turning of a wide range of stainless alloys. How does the AH6225 coating affect performance? The AH6225 PVD-coated surface increases wear resistance and edge life compared with uncoated grades, improving process stability during standard turning operations. Is the insert compatible with standard ISO holders? Yes, the DNMG150616 designation follows ISO geometry; compatibility requires matching holder form, relief angle, tolerance and thickness to ensure correct seating and clamping. Can the double-sided design reduce tooling costs? The double-sided construction with a cylindrical hole allows two usable cutting edges per indexation, which can reduce the number of spare inserts required and simplify inventory management. What corner radius is most suitable for finishing? The 1.6 mm corner radius offers a balance between strength and surface finish; finer radii may be preferred for high-quality finishing, while 1.6 mm supports robust profile stability in general turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 AH6225 Wendeplatten - Tungaloy
Take advantage of a universal PVD-coated carbide AH6225 grade that balances a sharp, stable cutting edge with broad applicability for stainless steels; combined with the rhombic DNMG form and a central clamping hole, this insert delivers predictable chip control and long tool life in medium turning operations. Order the insert directly via Metav Werkzeuge or consult our application specialists for holder matching and process setup. DNMG150616 AH6225 indexable turning insert by Tungaloy — PVD-coated carbide, for turning The DNMG150616 AH6225 is an ISO‑standard rhombic indexable insert designed for external and internal turning, offering a PVD‑coated carbide grade optimised for stainless steels and variable machining conditions ISO rhombic turning insert DNMG form PVD-coated carbide AH6225 grade for stainless steel Double-sided chipbreaker for stable cutting Central hole (cylindrical) for secure clamping Reliable cutting performance for stainless steels and variable conditions The rhombic indexable geometry combined with the PVD-coated carbide AH6225 creates a balance between sharpness and edge robustness that is especially useful when machining stainless steels. The coating reduces built-up edge and thermal wear, while the substrate maintains strength under intermittent cutting. In practice this means more consistent surface finish and longer intervals between index changes; the design supports medium cutting parameters where both finish and tool life matter. The integrated chipbreaker promotes predictable chip formation, lowering the risk of stringing or entanglement and simplifying chip evacuation. Secure clamping and compatibility explained for straightforward tool selection Compatibility with a toolholder depends on several measurable characteristics — form, clearance angle (0°), tolerance class, fastening method, size and thickness — all of which determine seating and stability. The insert features a cylindrical central hole and a plate thickness of 6.35 mm, enabling positive clamping and repeatable positioning. The standardised ISO designation ensures that the component can be matched to any holder accepting the DNMG150616 form; when selecting a holder, check the corner radius 1.6 mm and the insert pocket geometry to maintain correct cutting edge projection and minimise chatter. Clear specification reduces set‑up time and supports reproducible results across machines. Practical productivity gains and recommended application approach Using a double‑sided insert with a corner radius of 1.6 mm and a robust grade like AH6225 yields economical use of the insert area while preserving edge integrity during varied cuts. For turning operations, start with conservative feeds and speeds aligned to the workpiece material, then increase until the desired combination of surface finish and tool life is reached; the PVD layer helps tolerate moderate increases in cutting speed. Choose the matching chipbreaker variant according to material ductility and depth of cut — the included double‑sided breaker supports a wide range of chip volumes and promotes reliable chip control, contributing to stable cycle times and reduced rework. For tailored holder recommendations, cutting‑parameter support and to order the Tungaloy DNMG150616 AH6225 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application guidance and rapid supply Technical data Article number: 6947246 Manufacturer SKU: TUN6947246 Metav SKU: 6947246-Tungaloy Model series: ISO turning indexable inserts Facts ISO designation: 150616 Plate form: rhombic Corner radius: 1.6 mm Cutting angle: 55° Clearance angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Special features Grade: AH6225 (PVD‑coated carbide) Double-sided chipbreaker Central cylindrical hole for clamping Intended application: turning (external and internal) Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The DNMG150616 AH6225 insert is formulated for machining stainless steels and performs well under medium machining conditions thanks to its PVD‑coated carbide composition. How does the chipbreaker benefit production? The double‑sided chipbreaker on this indexable insert supports consistent chip formation, reducing risks of entanglement and improving evacuation in turning operations. Which holders are compatible with the DNMG150616 form? Holders designed for the DNMG ISO form with matching pocket geometry, correct projection and clamping for a cylindrical central hole will be compatible; ensure the holder accepts a 15 mm plate size and 6.35 mm thickness. What is the corner radius and why is it important? The insert has a corner radius of 1.6 mm; this radius influences surface finish and strength of the cutting edge and should be matched to the intended feed and depth of cut. Can the insert be used for internal turning? Yes, the rhombic shape and securing hole allow use in both external and internal turning; select an appropriate holder to ensure rigidity and clearance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 AH8005 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, reliable chip control and ISO compatibility for stable turning results. The insert ensures repeatable performance in demanding applications and supports efficient part production. Order the DNMG150616 AH8005 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150616 AH8005 — ISO turning insert for stable machining, Tungaloy The DNMG150616 AH8005 is an ISO rhombic turning insert designed for external and internal turning of heat-resistant alloys and hard materials, delivering wear resistance and consistent cutting performance. PVD-coated wear-resistant grade AH8005 Rhombic DNMG geometry, 55° approach With cylindrical central hole for secure clamping Double-sided chipbreaker for enhanced productivity Consistent wear resistance for demanding materials The insert is built from carbide with a PVD-coated surface, providing high resistance to abrasive and thermal wear when machining heat-resistant alloys and harder steels. This composition reduces flank wear and extends edge life, resulting in fewer tool changes and steadier cycle times. The design supports stable cutting conditions, which helps maintain dimensional accuracy and surface quality over longer production runs. Secure fitting and accurate geometry for repeatable results As an ISO-compliant rhombic insert with a 55° approach, the geometry promotes accessibility for both external and internal turning while balancing cutting forces. The with cylindrical central hole format and a plate thickness of 6.35 mm ensure reliable clamping in standard holders; the 1.6 mm corner radius contributes to robust edge strength on interrupted or heavy cuts. These features combine to reduce vibration and enhance process stability in everyday shop-floor use. Productivity gains through chip control and edge economy The double-sided chipbreaker layout doubles the available cutting edges per insert, which increases cost-efficiency and reduces downtime for index changes. The AH8005 grade focuses on productive chip formation and good edge retention under elevated temperatures, supporting consistent surface finishes and repeatable cycle outputs. For applications with steady clamping and correct choice of feed and speed, the insert contributes to measurable throughput improvements. Practical application advice and setup recommendations Suitable for turning operations where stable machining is achievable, select the chipbreaker and grade according to workpiece material and machine rigidity. The insert is compatible with standard DNMG holders that accept a rhombic plate with a cylindrical hole; ensure the clamping screw and seat are clean and within tolerance for repeatable seating. For further process parameters or to verify holder compatibility, consult technical documentation or contact Metav Werkzeuge for tailored advice. For reliable machining with Tungaloy's AH8005 grade and to confirm the correct holder and cutting data, contact Metav Werkzeuge for application support and supply details via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6794915 Manufacturer SKU: TUN6794915 Model series: ISO-Drehwendeschneidplatten Key dimensions Size: 15 Thickness: 6.35 mm Corner radius: 1.6 mm Approach angle: 55° Materials & features Grade: AH8005 (PVD-coated carbide) Plate shape: rhombic (DNMG) Hole: with cylindrical hole Relief angle: 0° Chipbreaker: double-sided Application: Turning FAQ What materials is this insert suitable for? The DNMG150616 AH8005 insert is specified for machining heat-resistant alloys and harder materials; the AH8005 grade offers enhanced wear resistance for these workpiece types. How is the insert secured in the holder? The insert has a cylindrical central hole and is designed for standard ISO-compatible DNMG holders; the cylindrical hole and seat geometry enable secure clamping when correct screws and underlay are used. How many cutting edges are available per insert? With a double-sided chipbreaker design, the DNMG150616 AH8005 provides multiple usable edges, increasing edge economy and reducing the frequency of insert replacement. What does the 55° specification mean for machining? The 55° approach angle defines the insert geometry and affects force distribution and surface finish; it offers a balance between cutting accessibility and edge strength for a variety of turning operations. Can this insert be used for internal turning as well as external turning? Yes, the rhombic DNMG form and the specified geometry make the insert suitable for both external and internal turning tasks when paired with an appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com