DNMG 150616 AH8015 Wendeplatten - Tungaloy
High wear resistance and reliable edge stability from the PVD-coated carbide AH8015, combined with a 1.6 mm corner radius and a 55° rhombic geometry, deliver consistent performance for machining heat-resistant alloys. Order the DNMG150616 AH8015 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150616 AH8015 Tungaloy turning insert — rhombic 55° geometry, 1.6 mm radius A DNMG150616 AH8015 Tungaloy turning insert designed for ISO-standard external and internal turning, offering a balanced compromise between wear resistance and edge stability for heat-resistant alloys. PVD-coated carbide AH8015 55° rhombic geometry for accurate cuts 1.6 mm corner radius for robust edges Double-sided chipbreaker for cost-efficient use Maximised process consistency through controlled chip formation The combination of a PVD-coated carbide grade and a double-sided chipbreaker ensures consistent chip control, reducing cycle-time variability in batch production. The coating increases surface hardness and heat resistance, which slows flank wear and helps maintain the cutting edge under interrupted cuts or elevated temperatures. For operations in stainless and heat-resistant alloys, this translates into longer dwell between indexings and steadier dimensional results, improving throughput and reducing rework rates. Geometry tuned for dimensional accuracy and surface quality A 55° rhombic geometry with a 1.6 mm corner radius provides a stable cutting edge that balances strength and finish quality. The geometry supports both finishing and semi-finishing passes: the angle reduces radial engagement for predictable cutting loads, while the corner radius helps achieve smoother surface finishes without compromising edge life. The 0° clearance angle and a cylindrical locating hole ensure secure seating in the holder, which is essential for repeatable part tolerances in production runs. Clear guidance for application and material selection Intended primarily for external and internal turning, the insert is particularly suitable for heat-resistant alloys when the AH8015 grade is selected. The grade offers a compromise between wear resistance and edge stability, meaning fewer unexpected edge failures during tough cuts. PVD coating is a thin, hard layer that improves resistance to adhesion and diffusion wear; it is helpful to choose the chipbreaker style and cutting parameters according to workpiece material and machine rigidity to exploit the insert’s strengths. Cost-effective system integration and workshop benefits Being double-sided and ISO-standard, the insert offers economical utilisation: two indexable edges per side before replacement lowers tooling cost per component. Compatibility with the holder depends on form, clearance, tolerance class, fixing method, size and thickness, so pairing the insert with the correct clamping set and replacement screws is important for secure assembly. The modular system—insert, matching external holder or boring bar, shim and fixing hardware—streamlines inventory and reduces setup time on the shop floor. For application advice on the PVD-coated AH8015 grade or to check stock and delivery options, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 — our specialists will assist with selection and supply. Technical data Article number: 6947249 Manufacturer SKU: TUN6947249 Internal SKU: 6947249-Tungaloy ISO designation: DNMG150616 Facts Corner radius: 1.6 mm Inscribed circle/size: 15 mm Thickness: 6.35 mm Geometry angle: 55° Clearance angle: 0° With cylindrical hole Special features PVD-coated carbide, grade AH8015 Double-sided chipbreaker Rhombic plate form, ISO-standard Suitable for external and internal turning Balanced for heat-resistant alloys Compatible with ISO turning holders and shims FAQ What materials is this insert best suited for? The DNMG150616 AH8015 insert is balanced for heat-resistant alloys and performs well in materials requiring improved wear resistance with good edge stability. How does the AH8015 grade affect tool life? The AH8015 PVD-coated carbide grade increases resistance to temperature-related wear, extending effective cutting time and improving edge reliability under demanding cutting conditions. Is the insert reversible and how many cutting edges are available? The rhombic insert is double-sided, offering multiple usable edges that reduce tooling cost per part and extend service intervals. What holder compatibility should be checked before use? Compatibility depends on plate form, clearance, tolerance class, fixing style, size and thickness; ensure the holder matches DNMG150616 dimensions and the cylindrical locating hole. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced wear resistance and edge stability of the AH8015 grade and the ISO‑compliant DNMG geometry for consistent turning results; order directly via Metav Werkzeuge or contact the consultants for application support. DNMG150616 AH8015 Tungaloy indexable insert for turning — PVD‑coated carbide, 55° rhombic geometry DNMG150616 AH8015 Tungaloy indexable insert is an ISO‑compliant rhombic insert designed for external and internal turning of heat‑resistant alloys and general turning tasks PVD‑coated carbide AH8015 Rhombic DNMG 55° geometry 1.6 mm corner radius Double‑sided, cylindrical hole Reliable machining of heat‑resistant alloys with balanced tool life The AH8015 grade is a PVD‑coated carbide designed as a first choice for the general machining of heat‑resistant alloys, offering a balanced compromise between wear resistance and edge stability. This balance reduces unexpected tool failures and contributes to a steadier process window. The coating improves high‑temperature performance and reduces flank wear, which in turn helps to maintain component tolerance and surface quality during extended operations. Precise fit and ISO compatibility for predictable results Built to the ISO series for rhombic inserts, the DNMG150616 geometry provides a 55° approach angle that suits both finishing and medium roughing when combined with appropriate cutting parameters. Compatibility with holders depends on the insert’s form, clearance angle (0°), tolerance class, fastening method, size and thickness; these factors determine seating, clamping reliability and cutting direction. The insert’s cylindrical hole and standard dimensions (15 mm size, 6.35 mm thickness) ensure a predictable mechanical interface with ISO‑standard external holders and boring bars. Operational benefits: economy, flexibility and reduced downtime As a double‑sided insert with a 1.6 mm corner radius, this plate doubles tool life per index and supports quick index changes, lowering per‑part tooling cost and machine downtime. The rhombic shape enables multiple cutting positions and good access in shoulder and profile turning. Use of a suitable double‑sided chipbreaker helps control chip form across a range of cutting depths, while the PVD surface treatment promotes consistent edge integrity, so fewer interruptions for edge dressing are required and productivity is improved. Guidance on selecting grade and chipbreaker for specific tasks Select the AH8015 grade when machining alloys that demand both heat resistance and stable cutting edges; pair the insert with an appropriate chipbreaker type according to workpiece material, mode of machining and machine rigidity. For unstable setups or heavy interrupted cuts, favour more robust edge preparations and conservative cutting data; for stable finishing operations, exploit the insert’s coating and geometry to increase cutting speed and improve surface finish. The series can be combined with matched holders, clamp sets and replacement screws as part of a complete tooling system. For reliable, production‑grade turning with Tungaloy quality, contact Metav Werkzeuge for order placement or application advice at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 to discuss the best insert and chipbreaker combination for the intended application Technical data Manufacturer article number: 6947222 Manufacturer SKU: TUN6947222 Our SKU: 6947222-Tungaloy Model series: ISO turning indexable inserts Designation: DNMG150616 Dimensions & core data Size: 15 mm Thickness: 6.35 mm Corner radius: 1.6 mm Clearance angle: 0° Approach angle: 55° Hole: with cylindrical hole Special features Grade: AH8015, PVD‑coated carbide Double‑sided insert Rhombic plate form Chipbreaker: double‑sided Typical application: external and internal turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials suit this insert best? The DNMG150616 AH8015 Tungaloy indexable insert is optimised for heat‑resistant alloys and general turning of steels and alloys; its PVD coating and carbide substrate suit operations where a balance of wear resistance and edge stability is needed. Can the insert be used on internal turning operations? Yes, the rhombic DNMG geometry and 55° approach angle make the plate suitable for both external and internal turning when mounted in a compatible ISO holder. How does the AH8015 grade compare for productivity and tool life? AH8015 provides a compromise between wear resistance and edge stability, delivering reliable tool life in a wide range of applications and contributing to steady productivity without excessive compromise on cutting speed. Is the insert reversible and how many cutting edges are available? The insert is double‑sided and indexable; each plate provides multiple cutting edges to reduce changeover frequency and lower tooling cost per edge. What should be considered when pairing with a holder? Ensure the holder matches the insert’s form, clearance angle (0°), tolerance class, fastening method, size and thickness for correct seating and clamping; the cylindrical hole and standard dimensions aid compatibility. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150616 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of reliable cutting-edge performance, balanced wear resistance and straightforward integration into ISO tool systems for consistent turning results; order the DNMG150616 AH8015 indexable insert directly via Metav Werkzeuge or ask the consultants for tailored recommendations. DNMG 150616 AH8015 indexable turning insert by Tungaloy — rhombic, 55° geometry DNMG150616 AH8015 Tungaloy indexable insert for general turning, designed for external and internal machining of heat-resistant alloys DNMG150616 rhombic insert, 55° cutting angle PVD-coated cemented carbide AH8015 6.35 mm plate thickness, cylindrical hole Double-sided chipbreaker for turning operations Consistent performance in general turning of heat-resistant alloys The DNMG150616 AH8015 Tungaloy indexable insert combines a PVD-coated cemented carbide grade with a balanced microstructure that provides wear resistance and edge stability. This combination makes the insert a reliable first choice for the general machining of heat-resistant alloys, offering a good compromise between tool life and cutting-edge robustness. The rhombic 55° geometry supports a range of cutting strategies while maintaining predictable engagement forces, which helps to reduce vibration and improve surface consistency in serial production. ISO compatibility and simple system integration for high uptime The insert conforms to the ISO turning-plate series and is designed for compatibility with standard holders and boring bars. Compatibility is determined by shape, clearance angle, tolerance class, fastening method, nominal size and plate thickness, and this insert matches those conventions to allow straightforward integration into existing tool systems. The presence of a cylindrical hole and the standardised dimensions mean fast replacement and secure clamping, which contribute to reduced machine downtime and consistent process repeatability. Controlled chip formation and improved surface results Equipped with a double-sided chipbreaker, the insert promotes efficient chip control across a variety of cutting conditions. Optimised chip formation reduces the risk of built-up edge and prevents long, stringy chips from interfering with the process, particularly when machining less stable set-ups or interrupted cuts. The balanced chip control also supports a finer surface finish in finishing passes and reduces the need for secondary operations, delivering a more economical machining cycle. Practical economy, handling and application advice The double-sided design allows for two usable cutting edges per index, making the insert cost-effective in routine production. The 6.35 mm plate thickness and 1.6 mm corner radius provide the mechanical robustness required for moderate depth of cut operations without compromising edge life. Selection of the correct chipbreaker and the AH8015 grade should be aligned with workpiece material, cutting speed and clamping stability to achieve the intended balance of productivity and tool life; matching the insert to the machining strategy will maximise the benefits of the system build-up that includes holder, shim and clamping screw. For application-specific advice on the Tungaloy DNMG150616 AH8015 insert and order availability, contact Metav Werkzeuge for consultation and local supply information Technical data Article number: 6947271 SKU: 6947271-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Corner radius: 1.6 mm Plate thickness: 6.35 mm Plate size: 15 mm Cutting angle: 55° Clearance angle: 0° Hole: with cylindrical hole Special features Grade/coating: AH8015, PVD-coated cemented carbide Plate shape: rhombic Chipbreaker: double-sided Typical application: external and internal turning Designed for machining heat-resistant alloys System components: compatible holder, shim and clamping set FAQ What materials is this insert suitable for? The DNMG150616 AH8015 insert is intended primarily for the general machining of heat-resistant alloys; the AH8015 PVD-coated cemented carbide provides a balance of wear resistance and edge stability suited to this application. Is the insert compatible with standard ISO holders? Yes, the insert is part of the ISO turning-plate series and its form, clearance angle, tolerance class, fastening method, size and thickness are designed for compatibility with standard holders and boring bars. How does the double-sided chipbreaker benefit production? The double-sided chipbreaker on this insert improves chip control and reduces built-up edge, which enhances surface finish and machining reliability in both external and internal turning operations. Can the insert be used for finishing passes? With its balanced grade and 55° rhombic geometry, the insert is suitable for a range of cutting strategies including finishing, provided the cutting parameters and holder rigidity are appropriate. How many usable edges does the insert provide? The insert is double-sided, offering two cutting edges per index; this contributes to a cost-effective edge utilisation strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T6215 grade and the double-sided chipbreaker for productive, low-maintenance turning of stainless steels; the rhombic DNMG150616 form and 1.6 mm corner radius deliver consistent dimensional control. Order directly via Metav Werkzeuge or request advice from our consultants for holder compatibility and optimal process settings. DNMG150616 T6215 indexable insert for Turning — CVD-coated carbide, 55° — Tungaloy DNMG150616 T6215 indexable insert for ISO-compatible external and internal turning, designed for stable to lightly interrupted machining of stainless steels. DNMG 150616 rhombic, 55° included angle CVD-coated carbide grade T6215 1.6 mm corner radius for profile work Double-sided chipbreaker, cylindrical hole Higher productivity and longer tool life in stainless steel turning The combination of a CVD-coated carbide substrate and the T6215 wear grade delivers a stable cutting edge under continuous and slightly interrupted conditions. The coating increases resistance to adhesive and abrasive wear, which translates into longer tool life and fewer tool changes on production lines. For process planners this means reduced downtime and a better cost-per-part ratio; the insert's geometry and coating are selected to provide consistent performance across a wide range of feed and speed settings, enabling predictable cycle times. Simple integration with ISO tooling and reliable clamping As an ISO-standard profile, the rhombic insert fits into a broad range of holders when the form, clearance, tolerance class, attachment and thickness are matched. The neutral 0° rake and the cylindrical locating hole facilitate repeatable seating and secure clamping, supporting high process stability in turning operations. Compatibility depends on the holder design and clamping set; using the correct underlay and replacement screws ensures the insert performs to specification and avoids chatter or runout. Improved chip control and surface quality for fewer reworks The double-sided chipbreaker is engineered to control chip formation during turning, breaking swarf reliably and helping to evacuate chips from the cutting zone. Effective chip control reduces the risk of re-cutting and surface damage, contributing to a consistent surface finish and fewer downstream operations. For operators less familiar with chipbreaker design: the feature channels and flanks are shaped to guide chips away from the cutting edge, lowering thermal load and improving dimensional repeatability. Application guidance and practical considerations for selection Select the chipbreaker and grade in line with workpiece material, fixturing rigidity and the type of turning (external or internal). The insert suits a wide spectrum of stainless steels and is best employed under steady cutting conditions; for heavier interruptions or very hard workpiece states, reassess the holder and cutting parameters. Keep a stock of compatible underlays, clamping sets and spare screws to maintain uptime — the typical system comprises the ISO insert, a matching external holder or boring bar, and the appropriate clamping hardware for secure fixation. For process optimisation or to check holder compatibility for the T6215 CVD-coated insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering assistance. Technical data Article number: 6944670 SKU: 6944670-Tungaloy Manufacturer SKU: TUN6944670 Model series: ISO indexable turning inserts Numbers / Core technical data Insert designation: DNMG150616 ISO code: 150616 Thickness: 6.35 mm Insert size: 15 mm Corner radius: 1.6 mm Included angle: 55° Relief/rake angle: 0° Special features / Versions Material: carbide Coating / grade: T6215 (CVD-coated carbide) Chipbreaker: double-sided Hole: with hole, cylindrical locating hole Shape: rhombic Application: turning (external and internal) Compatible with ISO holders; requires matching underlay/clamping set and screws FAQ What materials is this insert best suited for? The DNMG150616 T6215 indexable insert (Tungaloy, SKU 6944670-Tungaloy) is formulated for machining stainless steels under stable to lightly interrupted conditions. How does the T6215 coating affect tool life? The CVD-coated T6215 grade on the DNMG150616 insert increases resistance to adhesive and abrasive wear, which typically extends tool life and reduces the frequency of tool changes in production. Is the insert reversible or single-sided? This is a double-sided, rhombic insert; the double-sided chipbreaker allows reuse of the second cutting edge after rotation, helping to extend the effective life per insert. What holder features are critical for correct mounting? Correct holder selection is governed by form, clearance angle (0°), tolerance class, attachment and insert thickness; ensure a matching external holder or boring bar and the correct clamping set for secure seating of the DNMG150616 insert. Can the insert be used for internal turning operations? Yes, the insert is suitable for both external and internal turning when combined with an appropriate boring bar and stable setup; verify holder geometry and rigidity for internal applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated T6215 grade for reliable wear resistance and the robust 1.6 mm corner radius for secure edge life; order the insert directly via Metav Werkzeuge or consult their specialists for application advice. DNMG 150616 T6215 Turning indexable insert — Tungaloy DNMG150616 T6215 Tungaloy turning indexable insert designed for ISO‑standard turning applications, optimised for machining stainless steel under stable to slightly interrupted cutting conditions ISO 150616 rhombic insert, 6.35 mm thick CVD-coated carbide T6215 for stainless steel 1.6 mm corner radius for robust cutting edges Double-sided chipbreaker with cylindrical hole Consistent compatibility and secure clamping for production turning The insert is an ISO-standard indexable solution that simplifies tool selection across production lines where holder matching is essential. Compatibility is determined by insert form, 0° clearance angle, tolerance class, fastening type, size and 6.35 mm thickness, which together ensure a secure fit in matched holders and boring bars. For machinists seeking predictable set‑up times, the standardised geometry reduces trial adjustments and supports repeatable seating, so changeovers remain efficient and reproducible. Improved wear resistance and chip control when machining stainless steel Manufactured from carbide with a CVD-coated T6215 grade, the insert provides elevated resistance to abrasion and built‑up edge when turning stainless steel. The double-sided chipbreaker delivers controlled chip formation and evacuation, improving tool life and stabilising surface finish under continuous or slightly interrupted cuts. By pairing the coating and substrate properties with an appropriate chipbreaker, operators gain a tangible increase in machining stability and process reliability. Practical geometry and system advantages for workshop use The rhombic shape with a 1.6 mm corner radius and cylindrical hole offers two indexed cutting edges per side, supporting economical edge use and quick rotation when renewal is required. The insert is intended to be used as part of a system comprising a compatible external holder or boring bar, a support/clamp kit and replacement screws. For general turning operations the geometry balances edge strength and accessibility, making it suitable for shoulders, facing and light profiling where stable to slightly interrupted cuts occur. Contact Metav Werkzeuge for tailored machining recommendations and to order Tungaloy DNMG150616 T6215 inserts; expert application advice and availability details are provided directly by Metav Werkzeuge. Technical Data Article number: 6944717 Manufacturer SKU: TUN6944717 SKU: 6944717-Tungaloy Manufacturer: Tungaloy Numbers / Core technical data Insert designation: DNMG150616 Size: 15 mm Thickness: 6.35 mm Corner radius: 1.6 mm Clearance angle: 0° Included hole: with hole (cylindrical) Insert angle: 55° Designs / Special features CVD-coated carbide T6215 Rhombic insert form Double-sided chipbreaker ISO-standard turning insert Suitable for turning (stable to slightly interrupted cuts) System requires compatible holder, clamp and screws FAQ What materials is this insert recommended for? This Tungaloy DNMG150616 T6215 insert is recommended primarily for stainless steel machining and performs well under stable to slightly interrupted cutting conditions. How does the T6215 coating benefit performance? The CVD-coated T6215 grade on the carbide substrate enhances wear resistance and reduces adhesion, extending service life during turning of stainless steel with the DNMG150616 insert. Can the insert be used on interrupted cuts? Yes, the insert is designed for stable to slightly interrupted cuts; severe interruptions may require different geometries or grades. How many cutting edges are available per insert? The rhombic, double-sided design provides multiple indexed edges; the DNMG150616 format allows economical rotation for renewed cutting edges. Is this insert compatible with standard ISO holders? The DNMG150616 conforms to ISO specifications; compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness, so matching the holder to these parameters is essential. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T6215 Wendeplatten - Tungaloy
Take advantage of CVD-coated T6215 wear resistance and the 55° rhombic geometry to maintain steady machining of stainless steel while reducing tool changes; order directly via Metav Werkzeuge or consult the team for application-specific advice. DNMG 150616 T6215 rhombic turning insert for Drehen, 55° angle, Tungaloy The DNMG150616 T6215 is an ISO-compliant rhombic indexable insert designed for external and internal turning under stable to slightly interrupted cutting conditions. *DNMG150616 geometry, 55° rhombic insert *CVD-coated T6215 carbide for wear resistance *Double-sided chipbreaker, cylindrical hole *1.6 mm corner radius, 6.35 mm thickness Longer tool life through a wear-resistant CVD grade The combination of a CVD-coated surface and the T6215 cutting grade yields a durable cutting edge tailored for machining stainless steel in productive environments. The coating enhances abrasion resistance and reduces built-up edge, which translates into more consistent cutting forces and a longer period between indexings. For workshops aiming to keep cycle times stable, this translates into measurable reductions in unplanned downtime and improved repeatability. The specification as a rhombic ISO plate also supports predictable behaviour across comparable machine setups, so planning for production batches becomes more straightforward. Secure seating and flexible re-indexing reduce machine downtime An ISO-standard plate form ensures compatibility with a wide range of external toolholders, with fit determined by form, clearance angle, tolerance class, clamping and plate thickness. The presence of a cylindrical hole and a double-sided chipbreaker permits safe re-indexing, effectively doubling available edges before disposal. This design reduces tooling expenditure per machined component and simplifies logistics for replacement parts. In practice, the robust plate thickness and standardised mounting allow fast, repeatable changes and reliable clamping, which supports higher throughput and better process control on production lines. Geometry that improves surface finish and process stability The 55° rhombic shape combined with a 1.6 mm corner radius balances cutting strength and fine finish generation, while the 6.35 mm plate thickness adds rigidity in interrupted cuts. Together these geometric parameters support steady chip formation and efficient evacuation when paired with the appropriate chipbreaker selection. For turning operations that demand both dimensional accuracy and an acceptable surface quality, the geometry minimises deflection and helps maintain consistent tool engagement. Clear labelling of size and tolerance class assists in choosing the correct holder, reducing set-up iterations and contributing to overall process reliability. Contact Metav Werkzeuge to discuss how the Tungaloy DNMG150616 T6215 insert can be integrated into current turning routines and to request tailored application support from the Metav Werkzeuge team Technical data Article number: 6944729 Manufacturer SKU: TUN6944729 SKU: 6944729-Tungaloy Manufacturer: Tungaloy Facts Angle: 55° Corner radius: 1.6 mm Plate thickness: 6.35 mm Size: 15 mm Hole: cylindrical Special features CVD-coated carbide Grade: T6215 Double-sided chipbreaker Rhombic plate form (DNMG) ISO-compliant insert for turning Suitable for stainless steel Compatible with standard holders (form, clearance angle, tolerance class, clamping and thickness determine fit) FAQ What materials is this insert intended for? The DNMG150616 T6215 insert is specified for turning stainless steel under stable to slightly interrupted cutting conditions, with the CVD-coated carbide grade offering improved wear resistance. Can the insert be re-indexed to use multiple cutting edges? Yes, the insert features a double-sided chipbreaker and a cylindrical hole that permit safe re-indexing to extend usable life before disposal. How does the geometry influence surface finish? The 55° rhombic form and a 1.6 mm corner radius provide a balance between strength and fine finishing capability, while the 6.35 mm thickness improves rigidity and dimensional stability. Is this plate compatible with common ISO holders? Compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness; the insert conforms to ISO standards for straightforward holder matching. What distinguishes the T6215 grade from other grades? The T6215 grade is a CVD-coated carbide option prioritised for wear resistance when machining stainless steel, offering enhanced edge life in stable turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T6215 for wear resistance, the 55° rhombic geometry and the flip-friendly double-sided design to maintain steady production and reduce tool-change downtime; order directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG150616 T6215 — indexable turning insert for stainless steel, CVD-coated carbide, 55° rhombic DNMG150616 T6215 is a CVD-coated carbide indexable insert designed for turning applications, optimised for stainless steel under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 Optimised for stainless steel turning 55° rhombic form, 1.6 mm corner radius Double-sided chipbreaker, cylindrical hole Proven wear resistance that extends tool life and reduces costs The CVD-coated carbide composition, specified as T6215, provides high resistance to abrasive and adhesive wear commonly encountered when machining stainless steels. This coating technology forms a hard, thermally stable layer that slows flank wear and maintains edge integrity, resulting in fewer insert changes and longer tool life. The economic advantage is clear: lower tooling expenditure over production cycles and fewer interruptions to machining processes, which improves overall efficiency and reduces unit cost per part. Geometry and clamping for reliable compatibility and consistent results The 55° rhombic geometry combined with a 1.6 mm corner radius produces a versatile cutting edge suitable for general external and internal turning operations where a balance between strength and finish is required. The plate is manufactured to ISO dimensions (DNMG150616) and features a cylindrical hole for secure mounting; compatibility with holders depends on form, relief angle, tolerance class, fastening and plate thickness. Choosing the correct double-sided chipbreaker and matching the grade to the workpiece material ensures controlled chip flow, predictable cutting forces and consistent surface quality even in mixed production runs. Productivity benefits through process stability and simple handling As a double-sided indexable insert, this design doubles available cutting edges per insert and supports quick edge changes without regrinding, improving uptime. The combination of grade and geometry is intended for stable to slightly interrupted cuts, providing dependable performance in series production and batch machining. The insert supports good surface finish and dimensional repeatability when paired with appropriate feeds and speeds for stainless steel. Clear system assembly — insert, matching external holder or boring bar, support pad and clamp set — simplifies setup and reduces process variation on the shop floor. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts and to request the DNMG150616 T6215 with manufacturer SKU TUN6944686 for immediate dispatch Technical Data Article number: 6944686 Manufacturer's SKU: TUN6944686 SKU: 6944686-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Corner radius: 1.6 mm Included angle: 55° Plate thickness: 6.35 mm Size: 15 mm Special features CVD-coated carbide grade T6215 Double-sided chipbreaker Rhombic plate form Cylindrical hole ISO designation DNMG150616 Suitable for external and internal turning of stainless steel under stable to slightly interrupted conditions FAQ What workpiece materials are best suited to this insert? The DNMG150616 T6215 insert is optimised for machining stainless steel, with the T6215 grade engineered for wear resistance and reliable edge life in that material group. Is the insert compatible with standard ISO holders? Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; the DNMG150616 follows ISO dimensions and fits holders designed for DNMG plates when those parameters match. What advantage does the CVD coating provide? The CVD-coated carbide layer on the insert reduces abrasive wear and improves thermal stability at the cutting edge, extending service life and maintaining surface quality during turning operations. How does the 1.6 mm corner radius affect machining? A 1.6 mm corner radius offers a compromise between edge strength and surface finish, suitable for general-purpose turning where modest radii help resist chipping while still producing a good finish. Can the insert be used for interrupted cuts? The insert and grade are intended for stable to slightly interrupted cutting; for heavily interrupted cuts a different geometry or a more robust grade should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade T9205 and a rhombic DNMG150616 geometry with a 1.6 mm corner radius for productive, repeatable steel turning at elevated speeds — order the insert via Metav Werkzeuge or consult our specialists for application matching. DNMG 150616 T9205 — Tungaloy turning insert for productive steel machining The DNMG150616 T9205 is an ISO rhombic turning insert engineered for efficient external and internal turning of steel under stable conditions CVD‑coated carbide T9205 for steel machining Rhombic 55° geometry for versatile turning 1.6 mm corner radius for robust edge strength Double‑sided chipbreaker with cylindrical hole Higher metal removal with a wear‑resistant grade The combination of a CVD‑coated carbide substrate and the T9205 grade is tailored for productive turning of steel. The coating enhances wear resistance and allows for higher cutting speeds while maintaining an economical tool life. In practice, this means more efficient cycle times and fewer indexings compared with uncoated or lower‑grade inserts. The description lists the insert as ISO‑standard, which ensures consistent geometry and predictable behaviour in industrial setups. Secure clamping and broad holder compatibility The ISO designation and the rhombic form are decisive for fitment: compatibility depends on form, relief angle 0°, tolerance class, clamping method, size and thickness. The insert’s 55° cutting geometry and 6.35 mm plate thickness provide stable seating in standard external holders and boring bars; the cylindrical hole supports secure clamping and repeatable positioning. Clear specification of these parameters simplifies tool selection and reduces setup time in series production or jobbing environments. Improved process reliability and chip control A double‑sided chipbreaker optimised for the grade supports consistent chip formation when machining steel, reducing the likelihood of unstable chips and enabling safer, faster operation. The 1.6 mm corner radius gives a robust cutting edge that tolerates moderate interruptions while still delivering a good surface finish. Together, these characteristics contribute to lower machine downtime and improved overall process reliability, making the insert a practical choice for workshops seeking predictable results. Practical selection and economic benefits Choosing the right chipbreaker and grade for the workpiece and stability conditions pays off: the T9205 grade is intended for situations where high productivity and reliable wear behaviour are priorities. Using an ISO‑standard, indexable insert reduces tooling inventory complexity because the same holders accept standardised plates. The result is cost‑efficient machining, simplified logistics and easier reconditioning cycles for production environments. For availability, compatible holder recommendation and order placement of Tungaloy DNMG150616 T9205 inserts, contact Metav Werkzeuge — Metav Werkzeuge can advise on the optimal chipbreaker and supply the insert along with technical specification support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6785724 Manufacturer SKU: TUN6785724 SKU: 6785724-Tungaloy Designation: DNMG150616 Model series: ISO turning inserts Application: Turning Material: carbide Grade / coating: T9205 Numbers / Core technical data Corner radius: 1.6 mm Plate thickness: 6.35 mm Plate size: 15 mm Cutting geometry angle: 55° ISO code: 150616 Special features / Design Rhombic plate form Double‑sided chipbreaker Cylindrical hole (with hole) CVD‑coated carbide grade for steel machining ISO‑normed turning insert FAQ Is this insert suitable for external turning of steel? Yes. The DNMG150616 T9205 insert is designed for productive external turning of steel, with a CVD‑coated carbide grade that supports higher cutting speeds under stable conditions. Can the insert be used for internal turning or boring operations? Internal turning is possible when using a compatible holder or boring bar; the ISO‑standard geometry and the cylindrical hole support secure clamping and repeatable positioning in appropriate holders. What benefits does the T9205 grade provide compared with uncoated carbide? The T9205 grade offers improved wear resistance and higher cutting speed capability due to its CVD coating, resulting in longer effective tool life and increased productivity for steel machining. How does the 1.6 mm corner radius affect cutting performance? A 1.6 mm corner radius increases edge strength and improves robustness against interruption, which helps maintain surface finish and reduces the risk of chipping in heavier cuts. Which holder features ensure correct compatibility with this plate? Compatibility is determined by plate form, relief angle, tolerance class, clamping type, plate size and thickness; matching these parameters ensures secure seating and predictable cutting behaviour. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150616 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability and ISO-standard compatibility for consistent, productive turning of steel; the robust geometry and double-sided design reduce downtime and stocking complexity. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. DNMG150616 T9205 Tungaloy turning insert — ISO 150616, 55° rhombic, CVD-coated The DNMG150616 T9205 is an ISO-standard rhombic indexable insert designed for productive external and internal turning of steel under stable machining conditions. CVD-coated carbide for high wear resistance 55° rhombic geometry for versatile turning Double-sided insert with cylindrical hole Suitable for productive steel turning Maximise throughput with a wear-resistant CVD grade The CVD-coated carbide microstructure of this grade delivers enhanced wear resistance, making it suited to higher cutting speeds and longer tool life in stable setups. By favouring a coated substrate, the insert reduces flank wear and maintains cutting-edge integrity over extended cycles. This leads to fewer insert changes, lower tooling consumption and improved process economy when engaged in repetitive batch turning or serial production. Consistent surface finish through proven geometry and edge radius The 55° geometry and 1.6 mm corner radius ensure secure cutting engagement and predictable chip formation, which translates into improved surface quality and dimensional stability. The double-sided design offers two usable edges per side, extending service intervals while the cylindrical hole provides reliable clamping and repeatable seating in compatible holders. These attributes support stable machining and reproducible results across consecutive workpieces. Plug-and-play compatibility with ISO tool systems As an ISO-standard indexable insert, compatibility with holders depends on form, clearance, tolerance class, fastening and thickness rather than brand-specific fittings. The insert’s 0° clearance angle, 6.35 mm plate thickness and DNMG shape align with common external and internal turning toolheads, allowing straightforward integration into existing tool inventories and reducing setup complexity for production lines. Application guidance for steel turning and chip control The T9205 grade is developed for productive turning of steel in stable conditions; pairing the insert with an appropriate chipbreaker and cutting parameters optimises chip flow and heat management. Inserts of this type are commonly used for finishing and medium-turning operations where balance between tool life and surface finish is required. Select feed and speed to match material and rigidity to exploit the grade’s strengths while maintaining process security. For technical ordering or to discuss whether the Tungaloy DNMG150616 T9205 insert matches a specific application, contact Metav Werkzeuge for expert advice and delivery options via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6785740 Manufacturer SKU: TUN6785740 SKU: 6785740-Tungaloy Model series: ISO turning indexable inserts Designation: DNMG150616 Facts Insert size: 15 mm Corner radius: 1.6 mm Plate thickness: 6.35 mm Included angle: 55° Clearance angle: 0° Hole: cylindrical Special features Material: carbide Coating/grade: T9205 (CVD-coated) Chipbreaker: double-sided Plate form: rhombic Application: turning (external and internal) ISO-standard DNMG shape FAQ What materials is this insert suitable for? The DNMG150616 T9205 turning insert is formulated primarily for machining steel; the CVD-coated carbide grade supports productive operations on a wide range of steel alloys under stable conditions. How many usable cutting edges does the insert provide? This rhombic, double-sided insert offers multiple indexing possibilities—each side provides usable edges, and the design allows rotation or flipping to present fresh cutting edges and extend service life. Which holder features are required for correct clamping? Compatibility depends on form, clearance angle, tolerance, fastening and plate thickness; the cylindrical hole and DNMG profile require a matching holder designed for ISO DNMG inserts to ensure secure seating and repeatable positioning. How does the T9205 grade compare to other grades for turning? The T9205 (CVD) grade emphasises wear resistance and heat tolerance, making it well suited to higher cutting speeds and productive finishing or medium-turning tasks compared with uncoated or less wear-resistant grades. How should chip control be optimised with this insert? Select a chipbreaker suited to the workpiece alloy and adjust feed and speed to maintain short, controllable chips; the double-sided chipbreaker on this insert aids consistent chip formation when conditions are stable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, robust edge strength and ISO compatibility to boost throughput in medium steel turning; order the DNMG150616 T9215 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150616 T9215 — Tungaloy turning insert, CVD-coated carbide, 55° rhombic The DNMG150616 T9215 is a rhomboidal ISO turning insert designed for external and internal turning, delivering wear-resistant performance in medium steel machining. CVD-coated carbide grade T9215 55° rhombic geometry for versatile turning 1.6 mm corner radius for robust edge strength Double-sided insert with cylindrical hole Built for sustained productivity in medium steel turning The combination of CVD-coated carbide and the T9215 grade provides a balance of wear resistance and fracture toughness that favours long tool life during continuous and light interrupted cuts. This material combination reduces flank wear and maintains dimensional stability over longer runs, which directly supports higher machine utilisation and fewer tool changes. The result is measurable gains in process efficiency and predictable component quality when machining ordinary and alloyed steels. Geometry that ensures stable cuts and reproducible results The 55° rhombic geometry with a 1.6 mm corner radius offers a sturdy cutting edge that resists chipping while maintaining acceptable surface finish for general turning tasks. The rhombic form and 0° clearance support a wide range of turning operations and allow flexible approach angles on external and internal contours. Being double-sided increases insert life per unit, while the cylindrical hole ensures secure mounting and repeatable clamping torque for consistent results. ISO compatibility for straightforward tool-system integration As an ISO turning insert, the component integrates into established toolholder systems; compatibility is governed by form, clearance angle, tolerance class, fixing method, size and thickness. Typical system setup includes a matching external holder or boring bar, a support shim or clamping kit and replacement screws. This standardised approach simplifies stocking and reduces downtime when inserts are exchanged, making the grade suitable for production environments that demand rapid, reliable replacement. Material and application guidance for best performance The grade is optimised as a first choice for medium steel machining, combining resistance to abrasive wear with sufficient toughness for slightly interrupted cuts. Select the appropriate chipbreaker and insert sort to match the workpiece material, machining strategy and process stability; the chosen double-sided chipbreaker enhances chip control for many turning tasks. For applications outside medium steels, evaluate cutting data and consider alternative grades tailored to harder or softer materials to maintain component quality and tool life. Contact Metav Werkzeuge for application advice, availability of the Tungaloy DNMG150616 T9215 insert and personalised recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774083 Manufacturer SKU: TUN6774083 SKU: 6774083-Tungaloy Manufacturer: Tungaloy Series: ISO turning inserts Application: Turning Material: Carbide Facts Insert designation: DNMG150616 Grade: T9215 Corner radius: 1.6 mm Insert size: 15 mm Thickness: 6.35 mm Geometry angle: 55° Clearance (relief) angle: 0° Hole: with cylindrical hole Special features CVD-coated cemented carbide Double-sided chipbreaker Rhombic insert form Compatibility determined by form, clearance angle, tolerance, fixing, size and thickness Suitable for continuous to light interrupted cutting in medium steels FAQ What materials is this insert best suited for? The DNMG150616 T9215 insert is designed primarily for medium steel machining; its CVD-coated carbide composition combines wear resistance and toughness for productive turning. Can the insert be used for internal as well as external turning? Yes. The rhombic 55° geometry and standard ISO form support both external and internal turning operations when paired with the appropriate holder or boring bar. How does the double-sided design affect tool life? Being double-sided effectively doubles the usable cutting edges per insert, improving overall tool economy and reducing the frequency of index changes during production. Is the insert compatible with common ISO holders? The insert conforms to ISO designation DNMG150616; compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness and therefore fits standard ISO holders with matching specifications. Which chipbreaker should be selected for best performance? Select a chipbreaker that matches the workpiece material and cutting conditions; the supplied double-sided chipbreaker offers good chip control for many medium-steel turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9215 Wendeplatten - Tungaloy
Combining the T9215 CVD-coated carbide grade with the ISO DNMG150616 geometry delivers high wear resistance and fracture safety for productive medium-steel turning. The specification supports reliable clamping and consistent chip control, helping to maintain throughput with fewer insert changes. Order original Tungaloy inserts via Metav Werkzeuge or consult the technical advisors for selection support. DNMG 150616 T9215 — DNMG indexable turning insert for turning, Tungaloy DNMG150616 T9215 is an ISO-compliant, rhombic indexable insert designed for external and internal turning in medium-steel applications CVD-coated carbide grade T9215 for medium steel ISO DNMG 150616 rhombic insert, 55° geometry Double-sided chipbreaker and cylindrical hole Corner radius 1.6 mm, plate thickness 6.35 mm High productivity through a wear-resistant grade The CVD-coated carbide T9215 combines elevated wear resistance with enhanced fracture safety, making it a pragmatic choice for mid-range steel machining. The coating and substrate microstructure are optimised to extend tool life under continuous to light interrupted cuts, which lowers downtime for insert changes and reduces tooling costs per component. For production environments where cycle times and consistent output matter, this combination contributes directly to improved process efficiency and less unplanned intervention. Reliable geometry and secure clamping for consistent performance The ISO DNMG150616 form and 55° approach angle provide a balanced mix of accessibility and strength. A rhombic plate shape and a 6.35 mm plate thickness ensure mechanical stability at the cutting edge, while the cylindrical hole supports standard mounting systems. Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so the insert works best when paired with a matching external holder or boring bar. This structured system approach reduces variables in setup and promotes repeatable results. Consistent chip control and improved surface quality Equipped with a double-sided chipbreaker and a corner radius of 1.6 mm, the insert offers robust chip formation and a favourable balance between edge strength and surface finish. The corner radius contributes to load distribution at the tip: a 1.6 mm radius increases edge strength for roughing passes while still enabling acceptable finishes on semi-finish cuts. Selecting the correct chipbreaker and matching the insert grade to workpiece stability limits vibration, improves surface quality and minimises secondary operations. Practical application advice for workshop integration Designed primarily for turning of medium-strength steels, the insert is suitable for both external and internal operations where steady feeds and moderate depths of cut are common. For slightly interrupted cuts or heavier engagement, prioritise holders with increased rigidity and review cutting data to safeguard the edge. When in doubt about holder compatibility or the ideal chipformer for a specific material and setup, Metav Werkzeuge’s technical advisors can assist with grade and geometry selection to optimise cycle times and tool life. The insert’s system-ready design supports straightforward inventory management and fast replacement. Order genuine Tungaloy DNMG150616 T9215 inserts through Metav Werkzeuge or contact their technical advisors for tailored application advice and quick delivery from stock. Technical data Article number: 6944712 Manufacturer SKU: TUN6944712 SKU: 6944712-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Drehen Numbers / Core technical data Geometry angle: 55° Corner radius: 1.6 mm Plate size: 15 mm Plate thickness: 6.35 mm Clearance angle: 0° Hole: with hole (cylindrical) Designs / Special features Material: carbide Grade / coating: T9215, CVD-coated Plate form: rhombic (DNMG) Double-sided chipbreaker ISO-compliant indexable insert Suitable for continuous to light interrupted cuts FAQ What materials is this insert best suited for? The DNMG150616 T9215 insert from Tungaloy is primarily developed for medium steels, offering a good compromise between wear resistance and toughness for productive turning operations. How does the 1.6 mm corner radius affect performance? A 1.6 mm corner radius increases edge strength and resistance to chipping, improving durability during heavier machining while still enabling acceptable surface finish in semi-finishing passes. Is the insert compatible with standard DNMG toolholders? Yes, the ISO DNMG150616 geometry and cylindrical hole make the insert compatible with standard DNMG holders, though final compatibility depends on holder form, tolerance and fastening method. Can this grade handle interrupted cuts? The T9215 grade is suitable for continuous to light interrupted cuts; for heavy interruption, a more robust setup or a different grade may be advisable to avoid premature edge failure. What is the main advantage of the CVD coating on this insert? The CVD-coated substrate improves high-temperature wear resistance and maintains edge integrity, which supports longer tool life and consistent component quality in medium-steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9215 Wendeplatten - Tungaloy
Benefit from CVD-coated carbide wear resistance combined with a rhombic 55° geometry and a 1.6 mm nose radius for stable, productive turning. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored process recommendations. DNMG DNMG150616 T9215 Tungaloy indexable insert — Turning DNMG150616 T9215 is an ISO-standard indexable turning insert engineered for medium steel machining with a double-sided chipbreaker CVD-coated carbide for high wear resistance Ideal for medium steel machining Rhombic 55° geometry, 6.35 mm thickness Double-sided chipbreaker for chip control Higher throughput through abrasion-resistant grade The T9215 CVD-coated carbide grade is specified for medium steel and balances high wear resistance with fracture toughness, enabling elevated cutting speeds and longer tool life. This translates into measurable productivity gains: fewer tool changes, more stable metal removal and consistent cycle times in continuous to slightly interrupted cuts. The coated substrate reduces flank wear and helps maintain dimensional accuracy, so operators gain both efficiency and predictable durability. Robust geometry for reliable clamping and repeatability The rhombic 55° form combined with a 6.35 mm plate thickness provides a secure interface with standard ISO toolholders. The insert’s cylindrical hole and standard tolerance class ensure repeatable seating and torque behaviour during tightening; this reduces seating errors and vibration. Because holder compatibility depends on form, relief angle, tolerance class, fastening and thickness, using an ISO-compliant plate simplifies tool management and shortens setup times across varying holder systems. Consistent chip control and surface quality A double-sided chipbreaker tailored for turning promotes uniform chip formation and evacuation, which helps protect the cutting edge and maintain surface finish. The 1.6 mm nose radius supports a balance between strength and achievable surface quality: larger radii increase edge security and process stability, while the precision geometry of this insert allows fine control of feed-related finishes. For operators unfamiliar with chipbreaker effects, a short trial under expected conditions will identify the optimal feed and speed range. Application guidance for shop-floor implementation Designed primarily for turning operations, the insert performs best when matched with appropriate holder rigidity and cutting parameters that reflect workpiece stability. Select the chipbreaker and grade based on the workpiece material and the nature of the cut (continuous or slightly interrupted). Typical setups benefit from mid-range cutting speeds and stable feeds to exploit the T9215 grade’s wear resistance while avoiding edge chipping. For operations shifting between roughing and finishing, consider alternating inserts or adjusting feeds rather than compromising on a single parameter set. Contact Metav Werkzeuge to discuss how the Tungaloy DNMG150616 T9215 insert fits into existing turning processes and to request specifications for specific applications Technical Data Article number: 6773865 Manufacturer SKU: TUN6773865 SKU: 6773865-Tungaloy Model series: ISO-Drehwendeschneidplatten Type designation: DNMG150616 Facts Thickness: 6.35 mm Insert size: 15 mm Nose radius: 1.6 mm Relief angle: 0° Included angle: 55° Special features Material: Hartmetall Coating / grade: T9215 (CVD-coated carbide) Plate shape: rhombic Hole style: cylindrical hole Chipbreaker: double-sided Application: Drehen / turning ISO-standard indexable insert FAQ What materials is this insert suitable for? The DNMG150616 T9215 insert is specified for medium steel machining; the T9215 grade combines wear resistance and toughness for productive turning of steel. How does the 55° geometry affect cutting performance? The rhombic 55° form offers a versatile bearing angle that improves accessibility for external and internal turning while delivering predictable cutting forces and reliable seating in ISO holders. Can the insert be used for interrupted cuts? Yes, the CVD-coated carbide grade and robust geometry support continuous to slightly interrupted cuts; severe interruptions should be assessed with appropriate holder rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9215 Wendeplatten - Tungaloy
Rely on the combination of CVD-coated carbide grade T9215, rhombic 55° geometry and a 1.6 mm corner radius for consistently productive medium-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG150616 T9215 — Indexable turning insert for turning (rhombic, 55°) by Tungaloy A DNMG150616 T9215 indexable turning insert optimised for medium steel machining, intended for both external and internal turning and designed for continuous to light interrupted cuts. CVD-coated carbide grade T9215 Optimised for medium steel machining 55° rhombic geometry, 1.6 mm corner radius Double-sided chipbreaker with cylindrical hole Maximise productivity with a wear-resistant CVD coating The CVD-coated carbide composition of this insert delivers a robust balance between wear resistance and fracture toughness, making it particularly suitable for steady production runs. The coating reduces flank wear and helps maintain a consistent cutting edge, which extends tool life and reduces downtime for insert changes. With a design aimed at medium steel applications, the geometry supports higher cut volumes while preserving surface integrity, resulting in fewer reworks and a smoother production flow. Clear ISO compatibility and secure clamping for reliable use The insert adheres to ISO dimensions and is compatible with corresponding holders based on shape, relief angle, tolerance class, clamping method, size and thickness. The rhombic form with a 55° included angle and a cylindrical hole ensures straightforward mounting in standard external holders or boring bars, while the 6.35 mm plate thickness contributes to mechanical stability. The double-sided chipbreaker allows economical indexing and reduces tooling inventory, and the standardised interfaces simplify toolroom logistics and holder selection. Practical guidance for application and cutting stability Select the double-sided chipbreaker and grade combination that matches material, machining type and machine/part stability. For medium steel and steady feeds, this grade performs well under continuous to light interrupted cuts, offering both productivity and process security. Where interruptions or unstable setups occur, the insert’s balanced 1.6 mm corner radius supports impact resistance without sacrificing edge strength. Choosing the correct holder and conservative starting parameters will help confirm expected tool life before process ramp-up. System integration, handling and upkeep for consistent results The system comprises the ISO insert, a matching external holder or boring bar, a shim/clamp set and spare screws; keeping these components aligned ensures repeatable results and fast reconditioning. Inspect edges regularly for chipping and flank wear; indexed use of the double-sided insert provides quick renewal of the cutting edge. Store inserts in their original packaging away from humidity and avoid contact with hard debris to prevent coating and edge damage. Documented checks and clear labelling of spare inserts help maintain uptime and traceability. Contact Metav Werkzeuge today for cutting-data recommendations, availability of Tungaloy DNMG150616 T9215 inserts and tailored advice for medium-steel turning — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944684 Manufacturer SKU: TUN6944684 SKU: 6944684-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150616 T9215 Tungaloy-Wendeplatte Facts Corner radius: 1.6 mm Included angle: 55° Plate thickness: 6.35 mm Size: 15 mm Relief angle: 0° Hole: with hole (cylindrical) Special features Material: Hartmetall (carbide) Grade/coating: T9215, CVD-coated carbide Chipbreaker: double-sided Plate shape: rhombic Hole style: cylindrical hole Application: Turning Suitable for medium steel machining ISO-standardised indexable insert FAQ What materials is this insert suitable for? The DNMG150616 T9215 insert is specified for medium steel machining and combines CVD-coated carbide and toughness to handle continuous to light interrupted cuts effectively. How is the insert mounted and indexed? Mount the rhombic insert in an ISO-compatible external holder or boring bar; the cylindrical hole and clamping arrangement allow secure fixing and indexing of the double-sided chipbreaker. Does the grade offer good wear resistance for production runs? Yes, the T9215 CVD-coated carbide grade provides elevated wear resistance and fracture toughness, supporting stable performance in production environments. What are the key geometry details to check when selecting a holder? Verify the 55° included angle, 1.6 mm corner radius, 15 mm size and 6.35 mm thickness to ensure proper fit and clearance in the chosen holder system. Can the insert be used for internal turning? Yes, the insert’s rhombic form and ISO compatibility permit use in appropriate boring bars for internal turning operations when matched with the correct holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9215 Wendeplatten - Tungaloy
Combining the CVD-coated T9215 carbide grade, DNMG150616 geometry and a 1.6 mm corner radius, this indexable insert provides reliable performance and wear resistance for medium steel turning; order via Metav Werkzeuge or consult our team for holder compatibility and process optimisation. DNMG 150616 T9215 — Tungaloy indexable insert for turning, rhombic 55° A DNMG150616 T9215 Tungaloy indexable insert designed for external and internal turning of medium steels, offering robust CVD-coated carbide performance and consistent chip control. CVD-coated carbide grade T9215 Rhombic 55° geometry 1.6 mm corner radius Double-sided chipbreaker, cylindrical hole Boosted productivity for medium-steel turning The DNMG-style indexable insert combines CVD-coated carbide with the T9215 grade to balance wear resistance and fracture toughness for demanding turning operations. This yields longer tool life and reduced changeover frequency during continuous and lightly interrupted cuts. The 1.6 mm corner radius supports stable cutting forces and improved surface finish on workpieces in medium-strength steels, while the rhombic 55° geometry enables both external and internal operations with predictable engagement angles. Secure clamping and straightforward system compatibility ISO-standard geometry ensures straightforward selection of compatible clamping systems: form, clearance angle, tolerance class, fastening method, size and thickness determine the correct holder match. The insert features a cylindrical hole for positive locating and is available double-sided for efficient indexability. Choosing the correct holder and clamping set reduces run-out and vibration, promoting repeatable results and minimizing set-up time on the machine. Durable coating and reliable chip control The T9215 grade employs a CVD coating that improves surface hardness and thermal stability, enhancing performance under higher cutting speeds. This makes the insert a practical choice when balancing productivity and component integrity. The integrated double-sided chipbreaker optimises chip formation for medium-steel turning, lowering the risk of built-up edge and facilitating safer chip evacuation, which contributes to consistent part quality and reduced secondary operations. Contact Metav Werkzeuge for application advice and to confirm holder compatibility; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss supply of DNMG150616 T9215 inserts and tailored recommendations Technical data Article number: 6796082 Manufacturer SKU: TUN6796082 SKU: 6796082-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Grade/coating: T9215 (CVD-coated) Core data Corner radius: 1.6 mm Included angle: 55° Clearance angle: 0° Plate thickness: 6.35 mm Inscribed circle / size: 15 mm Special features Rhombic plate form With cylindrical hole for clamping Double-sided chipbreaker For external and internal turning Suitable for continuous to light interrupted cuts Compatibility defined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The DNMG150616 T9215 insert is optimised for medium steel turning; the Tungaloy T9215 grade provides a compromise of wear resistance and toughness tailored to that material group. How does the CVD coating improve performance? A CVD-coated substrate increases surface hardness and thermal resistance, allowing higher cutting speeds and improved wear life for the DNMG150616 indexable insert in production environments. Is the insert reversible or single-use? This indexable plate is double-sided, permitting rotation to a fresh cutting edge; the rhombic form and cylindrical hole support reliable reclamping and indexing. Which holder characteristics must be checked for compatibility? Compatibility requires matching the insert form, clearance angle (0° specified), tolerance class, fastening type, size (15 mm) and thickness (6.35 mm) to the chosen external or internal turning holder. Can the insert handle light interruptions in the cut? Yes, the T9215 grade is specified for continuous to lightly interrupted cuts and combines high wear resistance with good fracture resistance for stable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 1.6 mm corner radius and economical double-sided indexing to maintain high productivity in medium-steel turning; order original Tungaloy inserts via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. DNMG 150616 T9215 turning insert by Tungaloy — CVD-coated carbide, rhombic 55° geometry DNMG150616 T9215 Tungaloy-Wendeplatte is an ISO-format turning insert designed for robust medium-steel machining, combining a CVD-coated carbide grade with a rhombic, 55° configuration for general external and internal turning operations CVD-coated carbide grade T9215 Optimised for medium steel machining Double-sided rhombic insert, 55° geometry Cylindrical hole for secure fastening Dependable wear resistance for medium-steel turning The CVD-coated carbide formulation of the T9215 grade provides a balance of wear resistance and fracture resistance that supports high-volume production in continuous to slightly interrupted cuts. This composition reduces flank wear rates and extends tool life compared with uncoated grades, allowing stable toolpaths and fewer indexings. The DNMG150616 geometry combines a standard included angle with a 1.6 mm corner radius to deliver consistent component tolerances while maintaining edge strength for roughing and semi-finishing passes. ISO compatibility and secure clamping for fast changeovers As an ISO-series indexable insert, compatibility with the holder is determined by form, relief angle, tolerance class, clamping method, size and thickness. Key dimensions are 15 mm insert size, 6.35 mm thickness and a 0° relief angle; the insert features a cylindrical hole for positive, repeatable seating and a 55° included angle for general-purpose turning. The double-sided design offers two usable edges per insert, reducing tooling cost per edge and enabling rapid indexing in standard ISO external and boring toolholders. Predictable chips and improved process productivity A well-matched chipbreaker and the T9215 coating promote stable chip formation and predictable cutting forces, which in turn reduce machine downtime and improve surface quality. The insert’s design supports productive machining strategies: fewer tool changes, higher metal removal rates and lower scrap ratios. If the machining task is uncertain, Metav Werkzeuge’s technical team can advise on selecting the correct chipbreaker and cutting data to align with workpiece material and machine rigidity, helping to achieve consistent process results. For application advice or to secure genuine Tungaloy DNMG150616 T9215 turning inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored recommendations and fast supply Technical data Article number: 6772266 SKU: 6772266-Tungaloy Manufacturer SKU: TUN6772266 Brand: Tungaloy ISO designation: DNMG150616 Core dimensions Insert size: 15 mm Thickness: 6.35 mm Corner radius: 1.6 mm Included angle: 55° Relief angle: 0° Materials & features Material: cemented carbide Coating / grade: CVD-coated, T9215 Application: turning Chipbreaker: double-sided Plate shape: rhombic Hole: with cylindrical hole Model series: ISO indexable turning inserts FAQ Is this insert suitable for medium-steel turning operations? Yes. The DNMG150616 T9215 insert from Tungaloy is engineered for medium-steel machining, with the CVD-coated T9215 grade delivering the wear and fracture resistance needed for productive roughing and semi-finishing. Can the insert be indexed to use multiple cutting edges? Yes. The insert is double-sided and rhombic, providing two usable edges; indexing the DNMG150616 restores a fresh cutting edge and reduces tooling costs per effective edge. Which holders are compatible with this ISO insert? Compatibility follows ISO standards; the DNMG150616 fits holders matched by form, relief (0°), tolerance class, clamping type, size (15 mm) and thickness (6.35 mm). The cylindrical hole ensures secure, repeatable clamping. What does the grade T9215 indicate? T9215 is a CVD-coated carbide grade optimised for a wide range of steels, combining high wear resistance with fracture toughness for reliable, high-productivity turning using DNMG inserts. How does the 1.6 mm corner radius affect results? A 1.6 mm radius provides a compromise between edge strength and surface finish: robust enough for medium-duty roughing while still allowing acceptable surface quality in semi-finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide grade T9215 and a precise DNMG 55° geometry delivers high productivity in medium steel turning while maintaining tool life and component quality; compatibility with ISO holders ensures straightforward replacement and indexing. Order the DNMG150616 turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150616 T9215 ISO turning insert, Tungaloy — CVD-coated carbide, 55° geometry The DNMG150616 T9215 is an ISO-standard rhomboid turning insert designed for external and internal turning in medium steel, combining wear resistance and fracture toughness for continuous to lightly interrupted cuts. CVD-coated carbide for high wear resistance Optimised for medium steel machining Rhomboid DNMG geometry, 55° cutting angle Double-sided chipbreaker for flexible use High wear resistance for productive steel turning The T9215 grade is a CVD-coated carbide engineered to balance wear resistance and fracture toughness, making it suitable for productive machining of medium-strength steels. The coating reduces flank and crater wear under continuous cutting, which extends tool life and lowers tooling costs over production runs. As a result, process stability is improved and downtime for insert changes is reduced, supporting higher overall shop throughput without sacrificing component quality. Precision geometry ensures stable clamping and consistent finishes The ISO designation and rhomboid form with a 55° cutting angle are designed for predictable cutting forces and reliable seating in matching holders. Key geometry and dimensions — size 15 mm, thickness 6.35 mm, corner radius 1.6 mm, and 0° relief angle — contribute to stable edge engagement and reproducible surface finishes. The cylindrical hole and standard tolerance classes ensure correct clamping; the insert is indexed to present a fresh edge quickly, which reduces non-productive time and keeps part tolerances consistent across batches. System compatibility and application guidance for efficient processes This ISO turning insert is part of a modular system: an ISO-compatible external holder or boring bar, a suitable shim/clamp set and replacement screws complete the assembly. The double-sided chipbreaker provides versatility across feed ranges and helps control chip form during external and internal turning. The grade performs best in continuous to slightly interrupted cuts; for heavy interruptions the chipbreaker and cutting parameters should be adapted. Shops seeking reliable, repeatable results in medium-steel production benefit from integrating this insert into a clearly defined holder and clamping setup. Contact Metav Werkzeuge to discuss Tungaloy DNMG150616 inserts, verify holder compatibility or request application recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6772251 Manufacturer article number: 6772251 SKU: 6772251-Tungaloy Manufacturer SKU: TUN6772251 Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 1.6 mm Cutting angle: 55° Relief angle: 0° Special features Shape: rhomboid (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Grade/coating: T9215, CVD-coated carbide Application: turning (external and internal) Typical use: medium steel machining, continuous to lightly interrupted cuts System: ISO turning insert series FAQ Which materials is this insert suitable for? The DNMG150616 T9215 insert is optimised for medium steel machining; the T9215 CVD-coated carbide provides wear resistance and toughness suited to steel grades commonly used in general turning. What are the key geometry and size details? The insert has a rhomboid DNMG form with a 55° cutting angle, 15 mm nominal size, 6.35 mm thickness and a 1.6 mm corner radius, as specified for the DNMG150616 geometry. Can the insert be indexed and reused? Yes, the double-sided chipbreaker and ISO mounting allow the insert to be indexed for multiple cutting edges; the DNMG150616 by Tungaloy is reversible to expose fresh edges and maintain productivity. Is this grade suitable for interrupted cuts? The T9215 grade is intended for continuous to lightly interrupted cuts; for heavy interruptions, choose a more robust chipbreaker or adjust cutting parameters for the DNMG150616 insert. What components are required to mount the insert securely? The system requires an ISO-compatible outer holder or boring bar, a proper shim/clamp set and matching screws; secure clamping and correct tolerance class are essential for the DNMG150616 to achieve reliable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9215 Wendeplatten - Tungaloy
Combine the T9215 CVD-coated grade's high wear resistance and fracture toughness with a 1.6 mm corner radius and a 55° rhombic geometry for steady, productive medium-steel turning; order via Metav Werkzeuge or consult our specialists for application support. DNMG 150616 T9215 — Indexable turning insert, CVD-coated carbide, for turning The DNMG150616 T9215 is an ISO-standard rhombic indexable insert designed for turning applications, delivering a balance of wear resistance and toughness for continuous to slightly interrupted cuts in medium steel DNMG 150616 geometry, 55° cutting angle CVD-coated carbide T9215 for medium steel 1.6 mm corner radius for robust finish Double-sided insert with central cylindrical hole Improve productivity in medium-steel turning through optimised grade selection The CVD-coated T9215 cemented carbide grade combines high wear resistance with enhanced fracture toughness, making it particularly suitable for medium-steel applications where a balance of tool life and edge stability is required. Specifying this grade reduces unscheduled tool changes and supports higher material removal rates under continuous to light interrupted cuts. The CVD coating provides consistent surface hardness and heat resistance, which contributes directly to longer tool life and more predictable cutting performance. Secure clamping and universal compatibility for stable machining results Delivered in an ISO-standard rhombic form with a central, cylindrical hole, the insert ensures reliable locating and fastening in compatible holders. The compatibility with a holder depends on geometry, clearance angle, tolerance class, fastening method, size and thickness; recognising these interfaces before assembly enables consistent repeatability and avoids costly set-up iterations. The 0° clearance angle and 6.35 mm thickness contribute to mechanical rigidity, which helps maintain dimensional accuracy during heavy interrupted engagement or longer tool overhangs. Consistent surface quality and chip control with a tailored chipbreaker The double-sided chipbreaker design provides controlled chip formation and evacuation suitable for turning operations, reducing the risk of chip-related damage and improving surface finish. The 1.6 mm corner radius supports a robust cutting edge that helps to reduce edge chipping while still producing acceptable surface quality for general turning tasks. Together, these design elements lower the likelihood of rework, shorten cycle times and support steady-state production in batch and series machining. Practical considerations for process planners and operators As an ISO-indexed insert, the component integrates into established tooling systems with common seat geometries and fastening arrangements; selection of the appropriate holder and clamp is still essential to exploit the insert’s performance. For process planners, the indexable nature and double-sided layout offer economical use per part and simplified inventory management. The product’s designation and traceable article numbers allow for consistent procurement and stock control within industrial environments. For availability, application-specific recommendations and fast supply of Tungaloy DNMG150616 T9215 inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical advice and delivery information Technical data Article number: 6772281 Manufacturer SKU: TUN6772281 Stock SKU: 6772281-Tungaloy Brand: Tungaloy Designation: DNMG150616 Model series: ISO indexable turning inserts Material: cemented carbide Numbers / Facts Size: 15 Thickness: 6.35 mm Corner radius: 1.6 mm Cutting angle: 55° Clearance angle: 0° Special features / Versions Grade/coating: T9215, CVD-coated cemented carbide Chipbreaker: double-sided Insert form: rhombic Hole: central cylindrical hole (with hole) Application: turning; suitable for medium-steel machining Suitability: continuous to light interrupted cuts FAQ What is the primary application of this insert? The Tungaloy DNMG150616 T9215 indexable insert is intended for turning operations, specifically optimised for medium-steel machining with continuous to slightly interrupted cuts. How does the T9215 grade affect tool life? The T9215 CVD-coated grade provides elevated wear resistance and good fracture toughness, which together extend tool life under typical medium-steel cutting conditions and support stable productivity. Which holder features must be checked for compatibility? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; confirming these parameters ensures correct clamping and repeatable performance with ISO-standard holders. Can the insert be used on interrupted cuts? Yes; the insert and its T9215 grade are suitable for continuous to light interrupted cuts, offering a balance between edge strength and wear performance. How many usable edges does the insert provide? With a double-sided configuration, the insert offers multiple cutting edges before indexing or replacement is required, improving economic efficiency in series production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade tuned for medium-to-heavy steel work, a 55° rhombic geometry for versatile turning, and a 1.6 mm corner radius for stable cuts; order via Metav Werkzeuge or consult our experts for application-specific recommendations. DNMG150616 T9225 DNMG Turning Insert — Tungaloy, CVD-coated carbide, 55° rhombic for turning The DNMG150616 T9225 is a 55° rhombic turning insert designed for robust external and internal turning in medium-to-heavy steel machining. CVD-coated carbide for robust performance 55° rhombic insert for versatile turning Double-sided chipbreaker; centred cylindrical hole 1.6 mm corner radius for stable cutting Reliable cutting in medium-to-heavy steel The combination of CVD-coated surface and a T9225 carbide grade delivers a balance of wear resistance and toughness that suits interrupted and variable cutting conditions. As a result, process windows widen and tool life becomes more predictable under mixed engagement depths. This translates into fewer indexings and less unplanned downtime, which supports consistent cycle times and improved overall productivity for turning operations. Geometry designed for process stability and surface quality A 55° rhombic shape with a 1.6 mm corner radius provides a secure compromise between edge strength and form accuracy. The rhombic geometry enables both external and internal turning operations while the double-sided chipbreaker helps form controllable chips even when conditions change. Together these features reduce vibration and promote a steady cutting action, improving surface finish and dimensional repeatability on turned components. System compatibility and straightforward handling Built to ISO form, the insert fits standard ISO turning systems and is easy to integrate into existing tool stocks. The 6.35 mm thickness and standard size designation support secure clamping and predictable run-out when paired with the correct holder and shim. System compatibility reduces setup complexity and simplifies logistics, allowing machine shops to maintain lean inventories while ensuring quick changeovers and stable clamping. Application guidance and selection logic This insert is intended principally for turning steel where a robust universal grade is required; selecting the correct chipbreaker and edge preparation depends on workpiece material, machine rigidity and cutting strategy. For unstable set-ups, choose the tougher grade and a more pronounced edge; for light finishing, favour smaller feeds and the stable corner radius. Clear guidance and application notes help translate these choices into reliable shop-floor results and reduced scrap. For application-specific advice on the Tungaloy DNMG150616 T9225 insert and to discuss optimal chipbreaker and holder choices, contact Metav Werkzeuge by email or phone for fast, application-oriented support Technical data Article number: 6781270 Manufacturer SKU: TUN6781270 Item SKU: 6781270-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150616 Label: DNMG150616 T9225 Tungaloy-Wendeplatte Application: Turning Dimensions & measurable data Insert size: 15 Thickness: 6.35 mm Corner radius: 1.6 mm Clearance angle: 0° Geometry angle: 55° Hole style: cylindrical Materials & special features Material: carbide Grade/coating: T9225 (CVD-coated) Chipbreaker: double-sided Insert form: rhombic Hole: with hole (cylindrical) Compatibility: ISO-compatible turning insert FAQ What materials is this insert best suited for? The Tungaloy DNMG150616 T9225 insert is optimised for medium-to-heavy steel machining and performs well where a balance of toughness and wear resistance is needed. Is the insert compatible with my standard ISO holders? Yes, the DNMG150616 follows ISO geometry conventions; compatibility is determined by holder form, clearance, tolerance class, fastening method, size and thickness. Can this insert be used for internal turning? The 55° rhombic form and the 1.6 mm corner radius allow safe use in many internal turning applications provided the holder and setup offer sufficient rigidity. How does the T9225 grade behave under interrupted cuts? The T9225 CVD-coated carbide combines toughness and wear resistance to handle slightly interrupted cuts and changing engagement conditions with reduced risk of edge chipping. What key dimensions should be checked before ordering? Confirm insert designation DNMG150616, thickness 6.35 mm, corner radius 1.6 mm and hole style (cylindrical) to ensure correct fit with the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide and the robust T9225 grade to maintain productivity across varying cutting conditions; the ISO DNMG150616 geometry and clear mounting parameters ensure fast integration into existing tool systems. Order the DNMG150616 T9225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150616 T9225 Tungaloy indexable insert for Turning — CVD‑coated carbide, rhombic 55° The DNMG150616 T9225 is an ISO‑form indexable turning insert designed for medium to heavy steel machining, offering toughness for slightly interrupted cuts while retaining consistent surface finish and tool life. ISO DNMG 150616 geometry, 55° rhombic insert CVD‑coated carbide T9225 for robust steel cutting Double-sided chipbreaker, cylindrical hole design 1.6 mm corner radius, 6.35 mm plate thickness Reliable performance for demanding steel turning operations The insert delivers consistent cutting performance through a CVD‑coated carbide substrate optimised for mid to heavy steel work. The T9225 grade combines toughness and wear resistance, which means stable metal removal rates even when workpiece conditions vary. This results in fewer unplanned tool changes and a more predictable production rhythm, improving overall process efficiency. The 55° rhombic geometry contributes to versatile approach angles and adaptable cutting strategies. Clear compatibility and fast assembly into existing holders Compatibility with toolholders is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The ISO designation and standard dimensions simplify selection of a matching external holder or boring bar, reducing selection time and risk of mismatch. The insert’s cylindrical hole and standard fixing pattern facilitate secure clamping, while the 6.35 mm plate thickness and defined geometry support repeatable seating and reliable clamping forces for productive machining. Grade and chip control that reduce process variation The double‑sided chipbreaker design and the T9225 cutting grade are intended to control chip formation across a range of cutting parameters. This lowers the risk of entanglement and improves swarf evacuation in both external and internal turning tasks. The 1.6 mm corner radius provides a balance between strength at the cutting edge and the ability to produce acceptable surface quality; it is suitable for operations where moderate radii improve edge life without compromising dimensional control. Practical handling and inspection guidance For best results, match the insert to the appropriate holder geometry and select a chipbreaker variant that corresponds to the material and operation. Regular inspection of the seating surface, clamping screw and the cutting edge will extend service life; wear patterns on the coating indicate when regrinding or replacement is needed. The use of ISO‑standard inserts like this one streamlines inventory, as holders and spare screws are commonly interchangeable within the same ISO family, reducing downtime and simplifying logistics. For high process reliability with Tungaloy’s T9225 grade and ISO DNMG150616 geometry, contact Metav Werkzeuge for tailored advice or to arrange a supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6944685 SKU: 6944685-Tungaloy Manufacturer SKU: TUN6944685 Model series: ISO‑Drehwendeschneidplatten Designation: DNMG150616 Numbers / Core technical data Corner radius: 1.6 mm Plate thickness: 6.35 mm Plate size (inscribed circle): 15 mm Clearance angle: 0° Cutting angle: 55° Designs / Special features Material: carbide Coating: CVD Grade: T9225 Shape: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning ISO designation: DNMG150616 FAQ What materials is this insert suitable for? The DNMG150616 T9225 insert is optimised for medium to heavy steel machining; the T9225 grade provides toughness suited to slightly interrupted cuts. How does the chipbreaker affect machining? The double‑sided chipbreaker on this indexable insert promotes controlled chip formation, improving swarf evacuation and helping to maintain stable machining conditions. What determines compatibility with a holder? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO DNMG designation simplifies matching to standard holders. What does the 1.6 mm corner radius mean for surface finish and tool life? A 1.6 mm corner radius balances edge strength and surface finish: it enhances durability under heavier cuts while still allowing acceptable surface quality for general turning tasks. Is the insert reversible or double‑sided? This ISO‑style turning insert features a double‑sided design with a cylindrical hole for secure clamping, enabling economical indexable use within the scope of the insert’s geometry and grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade that tolerates varying engagement and the reliable 55° rhombic geometry for consistent chip control and tool life; order directly via Metav Werkzeuge or consult our application specialists for tailored holder compatibility and machining parameters. DNMG 150616 T9225 — Tungaloy indexable turning insert with CVD-coated carbide DNMG150616 T9225 Tungaloy turning insert designed for versatile external and internal turning in medium to heavy steel machining, offering robust wear resistance and stability under interrupted cuts CVD-coated carbide T9225 universal grade Rhombic 55° geometry for versatile turning Double-sided chipbreaker with cylindrical hole 1.6 mm corner radius, 6.35 mm plate thickness Reliable performance in variable cutting conditions The T9225 grade is a CVD-coated carbide blend engineered as a robust universal grade for medium to heavy steel turning. This composition balances toughness and wear resistance, which reduces edge chipping when engagement varies or cuts are lightly interrupted. The result is steadier machining and fewer unplanned tool changes, translating into improved cycle times and predictable consumable usage. The indexable plate’s construction is particularly advantageous where mixed part runs or varying clamp stability occur. Geometry that delivers predictable surface finish and tool life A 55° geometry in a rhombic form provides a versatile cutting angle that is well suited to general turning operations. The 1.6 mm corner radius offers a compromise between edge strength and achievable surface finish, while the double-sided chipbreaker aids consistent chip formation and evacuation. Together, these features reduce vibrations and enable repeatable results across a range of feeds and depths of cut, supporting quality control and lowering scrap rates during production. Fast integration into ISO tool systems for minimal downtime As an ISO-standard indexable insert, compatibility with a matching holder depends on form, clearance angle, tolerance class, fixing method, size and thickness. The insert fits into standard clamping systems when the corresponding holder and shim/clamp set are selected, allowing fast replacements and straightforward inventory management. This system approach simplifies logistics in workshop environments and supports quick changeovers between setups without requiring bespoke adaptors. Practical guidance for optimised cutting results Select the appropriate chipbreaker and grade based on workpiece material, machining stability and the expected cutting conditions. The Tungaloy insert performs well in interrupted cuts and under variable engagements; pairing it with a suitably rigid holder and optimised cutting data will enhance productivity and prolong tool life. For mixed-material batches, choosing the correct chipbreaker and monitoring cutting forces ensures consistent surface quality and reduced tool wear. Contact Metav Werkzeuge for application advice on the Tungaloy DNMG150616 T9225 insert and request a compatibility check with existing holders via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6781302 Manufacturer SKU: TUN6781302 SKU: 6781302-Tungaloy Brand: Tungaloy Facts Corner radius: 1.6 mm Plate thickness: 6.35 mm Inscribed size: 15 mm Cutting angle: 55° Special features ISO designation: DNMG150616 Grade/coating: T9225 (CVD-coated carbide) Geometry: rhombic (55°) Hole: cylindrical mounting hole Chipbreaker: double-sided Application: turning (external and internal) Series: ISO turning inserts FAQ Which materials is this insert best suited for? The Tungaloy DNMG150616 T9225 insert is optimised for medium to heavy steel machining and performs reliably under interrupted cuts and variable engagements. How is the insert mounted and how is compatibility ensured? Compatibility is ensured by matching the insert form, clearance angle, tolerance class, fixing method, size and thickness with the holder; the DNMG150616 fits standard ISO holders designed for this rhombic geometry. Is the insert reversible or indexable? The DNMG150616 is an indexable, double-sided insert designed for multiple indexing positions to maximise usable edges and extend service life. What chipbreaker and grade should be chosen for interrupted turning? For interrupted cuts, the T9225 grade combined with a robust double-sided chipbreaker is recommended to improve edge toughness and maintain stable chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD‑coated carbide, ISO‑standard geometry and a double‑sided, economical design to maintain steady metal removal on medium to heavy steel components; for further application support or procurement, contact Metav Werkzeuge or consult our technical advisors. DNMG 150616 T9225 Turning insert by Tungaloy — ISO rhombic insert, CVD‑coated carbide, 55° approach DNMG150616 T9225 is an ISO‑standard rhombic turning insert engineered for medium to heavy steel turning, offering a robust universal grade for varying engagement conditions. CVD‑coated carbide grade T9225 Universal for medium to heavy steel machining ISO rhombic DNMG geometry, 55° approach Double‑sided design with cylindrical hole Consistent metal removal with a tough, CVD‑coated grade The CVD‑coated carbide grade delivers a balance of wear resistance and toughness suited to medium to heavy steel turning. The coating reduces flank wear under elevated temperatures and preserves the cutting edge during intermittent cuts, so single‑edge life is extended and tool change frequency is lowered. This directly improves machine uptime and reduces process variability, making the grade a pragmatic choice where batch consistency matters. Fit and handling that simplify tool changeover Built to ISO dimensions, the rhombic insert fits common holders when form, clearance angle, tolerance class, fastening, size and thickness match. The standardised geometry ensures predictable seating and repeatable clamping forces, which limits misalignment and vibration. Using standard shims and clamps together with the insert and an appropriate external holder creates a compact system that is fast to index and re‑establishes cutting parameters with minimal setup time. Geometry that benefits precision and economy The rhombic shape with a 55° approach provides a compromise between strength and accessibility for shoulder, external and some internal turning operations. The double‑sided configuration effectively doubles usable edges, while the cylindrical hole secures positive locating and repeatability. With a plate thickness of 6.35 mm and a corner radius of 1.6 mm, this geometry supports stable cutting in heavier cuts while maintaining surface quality and dimensional control. Process guidance for reliable productivity Select a matching chipbreaker and cutting parameters to suit material variability and rigidity of the setup—this insert is intended for turning operations where intermittent engagement or changing cut depths require extra toughness. Where possible, favour rigid clamping and moderate feed to benefit from the grade’s wear resistance; the construction supports predictable edge life and reduced scrap rates. For complex applications, consider incremental testing of speeds and feeds to find the best balance between cycle time and tool life. For technical application advice or to procure genuine Tungaloy inserts, contact Metav Werkzeuge for expert guidance and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6944716 Manufacturer SKU: TUN6944716 SKU: 6944716-Tungaloy Model series: ISO turning inserts Material: carbide Grade: T9225 Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 1.6 mm Approach angle: 55° Clearance angle: 0° Special features CVD‑coated carbide Rhombic plate form (DNMG) Double‑sided chipbreaker Cylindrical hole, with hole Suitable for external and internal turning FAQ What materials is this insert intended for? The DNMG150616 T9225 insert is formulated as a universal grade for medium to heavy steel machining and performs well where higher toughness is required. How does the 55° geometry affect cutting performance? The 55° approach angle offers a balance of edge strength and accessibility for shoulder and external turning; the geometry of the DNMG150616 supports stable metal removal and good surface finish. Can the insert be indexed to use multiple cutting edges? Yes, the double‑sided design allows for indexing to a fresh edge, effectively extending usable life and improving cost efficiency for repetitive turning tasks. Which feature ensures repeatable seating in the holder? Repeatability is promoted by the ISO‑standard DNMG form together with the cylindrical hole that provides positive locating and secure clamping for consistent setup. What is the manufacturer item reference for reordering? Reorder using the manufacturer article number 6944716 or SKU 6944716‑Tungaloy for the DNMG150616 T9225 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a robust CVD-coated carbide T9225 grade, a 1.6 mm corner radius and a stable 55° rhombic geometry for reliable medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult our experts for application support. DNMG150616 T9225 — DNMG indexable turning insert for medium-to-heavy steel machining by Tungaloy DNMG150616 T9225 is an ISO-format indexable insert designed for external and internal turning, offering a balance of toughness and wear resistance for demanding steel operations. CVD-coated carbide T9225 55° rhombic geometry for versatile turning 1.6 mm corner radius for robust edge strength Double-sided chipbreaker with cylindrical hole Reliable cutting performance for medium-to-heavy steel turning The insert combines a CVD-coated carbide substrate with the T9225 grade to deliver consistent flank life under variable engagement conditions. The moderate toughness of the grade is engineered to absorb slight interruptions and inconsistent feeds without premature chipping, which translates into fewer unplanned insert changes and steadier cycle times. As an indexable insert, it supports cost-effective multi-edge use and reduces tool-change frequency, improving overall machining throughput. Broad holder compatibility and straightforward machine integration Manufactured to ISO dimensions, the rhombic format with a 55° included angle ensures compatibility with a wide range of DIN/ISO external holders and boring bars. Mounting stability is governed by form, clearance, tolerance class, fastening method, size and thickness; the cylindrical hole and standard thickness facilitate secure clamping and simple indexing. This predictability in fixture choice reduces setup time and supports repeatable part quality on both lathes and bar-feed systems. Optimised grade and geometry for chip control and surface finish The double-sided chipbreaker design helps form controllable chips across a variety of steel grades, minimising entanglement and improving evacuation in both continuous and slightly interrupted cuts. The 1.6 mm corner radius offers a compromise between edge strength and achievable surface finish, allowing moderately heavy cuts without sacrificing dimensional accuracy. The plate’s 6.35 mm thickness contributes to rigidity and vibration damping, which supports improved surface integrity and longer tool life. Practical application notes and handling benefits For turning operations, select a matching holder and chipbreaker variant that suits material, cut depth and machine stiffness; choosing the correct combination prolongs insert life and enhances process stability. The insert’s universal characteristics make it particularly suitable for production environments with mixed steels and variable part geometries. Careful attention to cutting data adapted to the T9225 grade will yield steady wear behaviour and predictable reconditioning intervals for production planning. For process-stable medium-to-heavy steel turning with Tungaloy’s T9225 grade, contact Metav Werkzeuge for availability and tailored application advice. Technical data Article number: 6780754 SKU: 6780754-Tungaloy Manufacturer SKU: TUN6780754 Designation: DNMG150616 T9225 Series: ISO turning indexable inserts Core data Size: 15 mm Thickness: 6.35 mm Corner radius: 1.6 mm Included angle: 55° Clearance angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating/type: CVD-coated carbide Grade: T9225, universal for medium-to-heavy steel machining Shape: rhombic (DNMG) Chipbreaker: double-sided Application: turning (external and internal) ISO standardised format FAQ What materials is this insert suitable for? The DNMG150616 T9225 insert is specified for medium-to-heavy steel machining; the T9225 grade provides toughness and wear resistance suited to varying engagement conditions. Does the insert fit standard ISO holders? Yes, the insert follows ISO dimensions and the rhombic 55° geometry is compatible with standard external holders and boring bars designed for DNMG-format plates. How does the chipbreaker influence performance? The double-sided chipbreaker promotes consistent chip formation and evacuation, reducing the risk of chip build-up and supporting stable surface finish during turning operations. What are the advantages of the 1.6 mm corner radius? A 1.6 mm corner radius increases edge strength for heavier cuts while still allowing good surface quality, making it a practical choice for mixed production runs. Is the insert reversible and indexable? The plate is double-sided and indexable, enabling multiple cutting edges per insert which improves cost efficiency and reduces downtime for edge changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide substrate, the resilient T9225 grade and a 55° rhombic geometry for dependable medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult our technical advisors for holder matching and process set-up. DNMG150616 T9225 Tungaloy turning insert — CVD-coated carbide, 55° rhombic A DNMG150616 T9225 Tungaloy turning insert designed for external and internal turning, offering a robust universal grade for interrupted cuts and variable engagement in steel machining CVD-coated carbide for robust performance Universally tough grade T9225 for steel machining 55° rhombic geometry for standard holders Double-sided chipbreaker with cylindrical hole Predictable performance through a robust substrate The insert is built on a CVD-coated carbide substrate that combines wear resistance with required toughness for medium-to-heavy machining. This T9225 grade is formulated to resist edge chipping under varying cutting conditions, which results in longer tool life and fewer indexing cycles. The double-sided design ensures two cutting edges per index, reducing tooling costs per part and enabling consistent component quality over longer production runs. As a result, cycle-time stability and process reliability are improved, making the insert a pragmatic choice for batch and continuous turning operations. Straightforward compatibility with ISO turning systems Compatibility of an insert depends on form, relief angle, tolerance class, fastening and dimensions. The rhombic 55° geometry and dimensions (15 mm size, 6.35 mm thickness, 1.6 mm corner radius) allow simple integration into standard ISO external holders and boring bars. The presence of a cylindrical hole supports secure clamping and repeatable seating, while the 0° relief angle provides stable engagement for outer and inner diameters. Clear specification of these parameters reduces setup time and helps ensure the cutting edge sits correctly in the holder, improving runout behaviour and surface finish without complex reconfiguration. Practical guidance for machining and process gains Select the double-sided chipbreaker and the universal grade when facing mixed engagement conditions or slightly interrupted cuts; this combination balances chip control and edge toughness. For steel machining, modest feeds and cutting speeds tuned to the T9225 recommendation yield an optimal balance between surface integrity and tool economy. The insert’s geometry supports controlled chip flow and reduces heat concentration at the cutting edge, which benefits batch consistency and minimises scrap rates. Where higher productivity is required, pairing this insert with a rigid holder and optimised coolant strategy increases achievable metal removal rates while maintaining surface quality. Why this insert benefits workshop productivity By offering a combination of a resilient carbides substrate, versatile chip control and standard ISO dimensions, this indexable solution reduces inventory complexity and supports a broad range of turning tasks. The result is lower per-part tooling costs, fewer downtime interruptions for indexing and more predictable production output. For operations seeking a balance of process security and economical cutting performance, the configuration described here delivers measurable improvements in throughput and repeatability. Contact Metav Werkzeuge for application-specific recommendations on Tungaloy turning inserts and precise holder matching at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780736 Manufacturer SKU: TUN6780736 Seller SKU: 6780736-Tungaloy Designation: DNMG150616 T9225 Tungaloy-Wendeplatte Key specifications Insert size: 15 mm Thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Approach angle: 55° Hole style: cylindrical Material & features Substrate: CVD-coated carbide Grade: T9225 Geometry: rhombic, double-sided Application: external and internal turning System: ISO turning insert series FAQ Is this insert suitable for interrupted cuts in steel? Yes. The DNMG150616 T9225 insert uses a resilient CVD-coated carbide grade that is intended for medium-to-heavy steel machining and performs well under lightly interrupted cutting conditions. How is the insert secured in the holder? The insert features a cylindrical hole for positive clamping and is compatible with ISO-standard clamping systems when the holder matches the DNMG form, size and thickness. How many usable edges does the insert provide? The rhombic, double-sided design offers two indexed cutting edges, enabling economical use of each insert before replacement. Which dimensions are critical for holder selection? Key dimensions include the 15 mm size, 6.35 mm thickness and the 55° rhombic form; these determine seat geometry, clearance and clamping fit in ISO holders. Can the insert be used for internal turning as well as external? Yes. The geometry and relief angle support both external and internal turning applications when used with an appropriate boring bar or internal holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide T9225 grade, robust DNMG 150616 ISO geometry and a 1.6 mm corner radius for reliable medium-to-heavy steel turning; order the insert directly via Metav Werkzeuge or consult the team for application advice. DNMG150616 T9225 — Indexable turning insert, CVD-coated carbide by Tungaloy The DNMG150616 T9225 is an ISO-standard indexable insert designed for turning operations, providing a versatile solution for medium to heavy steel machining where toughness and consistent performance are required. ISO DNMG 150616 geometry for versatile turning CVD-coated carbide grade T9225 for steel machining 1.6 mm corner radius for robust edge strength Double-sided chipbreaker, cylindrical hole, 55° Consistent cutting performance for demanding steel work The combination of a CVD-coated surface and a wear-resistant carbide substrate delivers stable cutting under variable engagement conditions. The T9225 grade is formulated as a robust universal option for medium to heavy steel turning, offering elevated toughness where interrupted cuts or changing cut depths occur. The 1.6 mm corner radius increases edge strength and reduces the risk of premature chipping, while the 55° insert geometry balances favourable cutting forces with attractive component finishes. These technical characteristics translate into longer cutting windows and fewer insert changes, supporting reliable cycle times on the shop floor. Straightforward compatibility with ISO holders for efficient setup ISO standardisation ensures predictable interchangeability: compatibility is defined by insert form, relief angle, tolerance class, fastening method, size and thickness. The rhombic DNMG shape with a cylindrical hole and a 0° relief angle suits common external holder designs; the system typically comprises the insert, a matching external holder or boring bar, an underlay/clamping set and replacement screws. Dimensionally, the 6.35 mm thickness and 15 mm size allow straightforward integration into existing tool families. Clearly stated geometry and tolerance make tool changeovers fast and reduce the risk of mismatched seating, which supports predictable process setup and minimal downtime. Better chip control and resilient edge life for daily production A double-sided chipbreaker promotes effective chip formation and evacuation in a range of cutting conditions, improving surface quality and lowering the chance of chip-related interruptions. The CVD coating provides thermal stability and wear resistance, extending the insert’s useful life under elevated cutting temperatures common in steel turning. By combining consistent chip control with a tough substrate, the insert contributes to productive machining sequences and repeatable part quality. In practice, this means fewer tool interventions, better utilisation of the toolroom’s capacity and more predictable output when processing batches. Request a tailored application assessment from Metav Werkzeuge for the Tungaloy CVD-coated DNMG150616 T9225 insert to ensure the grade and geometry meet specific cycle and material demands — contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6781279 SKU: 6781279-Tungaloy Manufacturer SKU: TUN6781279 Brand: Tungaloy Model series: ISO turning inserts Core specifications Corner radius: 1.6 mm Included angle: 55° Relief angle: 0° Thickness: 6.35 mm Size: 15 mm Materials & features Material: carbide Coating / grade: T9225 (CVD-coated) Geometry: rhombic (DNMG) Chipbreaker: double-sided Hole: with cylindrical hole Application: turning Typical system components: insert, holder/boring bar, underlay/clamping set, replacement screws FAQ What materials is this insert suitable for? The DNMG150616 T9225 insert is intended primarily for medium to heavy steel turning; the T9225 CVD-coated carbide grade offers the toughness required for variable cutting conditions. Is the insert compatible with standard ISO DNMG holders? Yes, the insert follows ISO DNMG geometry; compatibility depends on form, relief angle, tolerance class, fastening, size and thickness, so matching holder specifications are recommended. How does the chipbreaker affect machining? The double-sided chipbreaker on this insert promotes controlled chip formation and evacuation, which supports improved surface finish and reduces the likelihood of chip-related interruptions. Can this grade handle interrupted cuts? The robust T9225 grade is designed with increased toughness to cope with interrupted cuts and slightly unstable engagement conditions common in medium-to-heavy steel turning. What are the key dimensional details to check before fitting? Check the corner radius (1.6 mm), the included angle (55°), thickness (6.35 mm) and the cylindrical hole arrangement to ensure correct seating in the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com