PNCU 0905GN AH140 Wendeplatten - Tungaloy
Take advantage of the combination of process security, PVD-coated AH140 carbide and a pentagonal geometry for efficient high‑feed milling; order the insert directly via Metav Werkzeuge or ask our consultants if needed. PNCU0905GN AH140 PNCU indexable insert for milling by Tungaloy — pentagonal, PVD-coated carbide, 0° relief PNCU0905GN AH140 is an indexable insert designed for high‑feed milling, suitable for pocket and face machining in DoFeed systems. Pentagonal 09 format for stable cutting PVD-coated AH140 grade for wear resistance 0° relief for high-feed shearing action Cylindrical hole with double countersink for secure clamping Maximise material removal with stable, high‑feed milling The PNCU0905GN insert, from the DoFeed model series, is engineered for high‑feed milling where large material removal rates are required at small axial depths. The combination of a pentagonal plate form and a PVD‑coated carbide substrate in the AH140 grade ensures a consistently sharp cutting edge and reliable wear performance. This enables higher material removal per time unit while maintaining process stability, reducing the need for frequent index changes and supporting longer uninterrupted production runs. Consistent edge stability and reliable chip control A pentagonal geometry provides several usable cutting edges before indexation, improving economy per insert. The double‑sided chipbreaker optimises chip formation for controlled evacuation, which is particularly valuable in pocket and face operations. The 0° relief specification reduces unwanted rubbing in the cutting zone under high feed rates, while the plate thickness (5.56 mm) contributes to edge strength and stability. The insert’s cylindrical hole with a double countersink (40°–60°) permits secure clamping, minimising micro‑movement and supporting repeatable surface quality. System compatibility and application focus for workshops The insert is supplied as part of a complete system concept: milling body, matching indexable inserts and screws. This ensures straightforward integration into existing DoFeed fixtures or into compatible high‑feed toolholders. Typical uses include pocket milling and face milling, where a wear‑resistant, fracture‑tolerant grade like AH140 offers process security. The PVD coating and the robust carbide body make the insert suitable for continuous production environments where both tool life and consistent results are decisive. For application advice, availability and to discuss suitable toolholders for Tungaloy AH140 inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — experienced consultants are available to recommend the optimal DoFeed configuration for the machining task at hand. Technical Data Article number: 6860132 Manufacturer SKU: TUN6860132 Model series: DoFeed Material: Carbide Coating / Grade: AH140 (PVD‑coated) Core data Plate thickness: 5.56 mm Insert size: 09 Main cutting angle: 108° Relief angle: 0° Countersink angle: 40°–60° Special features Pentagonal plate form Double‑sided chipbreaker With hole; cylindrical hole + double‑sided countersink High‑feed milling application, pockets and face milling System: milling body, matching inserts and screws FAQ What is the primary application of this insert? The PNCU0905GN AH140 Tungaloy indexable insert is intended for high‑feed milling, including pocket and face machining within DoFeed systems. Which tool system is this compatible with? The insert is part of the DoFeed system concept and is used with a matching milling body, corresponding indexable inserts and fixation screws for secure clamping. How does the pentagonal shape benefit production? The pentagonal plate form provides multiple indexing positions and improves cost efficiency by increasing the number of usable cutting edges per insert. What does the AH140 designation mean? AH140 identifies a PVD‑coated carbide grade tailored for wear and fracture resistance in milling operations that demand a sharp cutting edge and process reliability. Is the insert reversible or single‑sided? The insert features a double‑sided chipbreaker, allowing the plate to be indexed and used on both sides where the toolholder and application permit Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNCU 0905GN AH3135 Wendeplatten - Tungaloy
High-feed performance meets reliable edge security: the PNCU0905GN AH3135 insert delivers large time-chip volumes with small axial depths while its PVD-coated, wear- and break-resistant carbide composition supports consistent cutting performance. Order the insert directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. PNCU 0905GN AH3135 pentagonal indexable insert for high-feed milling — Tungaloy PNCU0905GN AH3135 pentagonal indexable insert designed for high-feed milling, pocketing and face machining where sharp cutting edges and process reliability are required PVD-coated carbide grade AH3135 for process security Pentagonal insert form with 108° cutting angle Cylindrical hole with dual countersink 40°–60° Double-sided chipbreaker, suitable for high-feed milling Maximise metal removal with controlled axial engagement The DoFeed family is engineered to enable high-feed milling with small axial depths, allowing large material removal rates while reducing radial engagement. The combination of a PVD-coated carbide AH3135 grade and a dedicated double-sided chipbreaker ensures stable chip formation and reduced risk of edge chipping under interrupted cuts. The pentagonal geometry plus a 108° cutting angle provides a balance between strength and usable cutting length, making the insert particularly productive in pocketing and planing operations. Process engineers will value the predictability of the cutting forces and the improved tool life that follows from the grade’s wear- and break-resistant properties. Robust edge quality for repeatable production results A consistently sharp cutting edge and sound process security are central benefits of this insert. The wear- and break-resistant composition maintains edge integrity across longer cycles, translating into fewer tool changes and more predictable surface finishes. The insert’s 0° relief and 5.56 mm plate thickness contribute to mechanical stability in the clamping seat, while the cylindrical hole with a double-sided countersink (40°–60°) supports secure seating and correct orientation in compatible milling bodies. These features reduce vibration and preserve the cutting edge, which is particularly important when machining interrupted depths or variable material batches. System compatibility and economical edge utilisation The insert is supplied as part of a system approach: a milling body, matching indexable inserts and clamping screws form the complete cutting solution. The pentagonal shape provides multiple indexing positions, increasing the number of usable cutting edges per insert and improving cost efficiency per edge. Simple mechanical mounting, combined with the standardised ISO designation 0905GN, simplifies tool management and inventory. For engineers requiring documented parameters or setup guidance, Metav Werkzeuge can supply matching body recommendations and technical data to integrate the insert into existing tool systems. Contact Metav Werkzeuge today for tailored application advice on the PNCU0905GN AH3135 insert and to arrange supply or specification support Technical data Article number: 6770097 Manufacturer SKU: TUN6770097 Label: PNCU0905GN AH3135 Tungaloy-Wendeplatte Model series: DoFeed Core measurements Cutting angle: 108° Plate thickness: 5.56 mm ISO designation: 0905GN Relief (free) angle: 0° Plate size: 09 Features & materials Material: carbide Coating: PVD (AH3135) Shape: pentagonal Hole: with cylindrical hole + double countersink (40°–60°) Chipbreaker: double-sided Application: Milling System design: insert, matching milling body and screws FAQ Is this insert suitable for high-feed pocketing and planing? Yes. The PNCU0905GN AH3135 insert from Tungaloy is intended for high-feed milling, including pocketing and planing, where large time-chip volumes are required at small axial depths. How many usable edges does the pentagonal form provide? The pentagonal geometry offers multiple indexing edges; the exact number of usable edges depends on the chosen cutting parameters and wear limits for the PNCU0905GN AH3135 insert. What benefits does the AH3135 grade provide compared to uncoated grades? The PVD-coated AH3135 grade provides enhanced wear resistance and break protection, improving process security and extending edge life under demanding milling conditions. Can the insert be mounted in standard DoFeed milling bodies? Yes. The insert is part of the DoFeed model series and is designed to be used with matching milling bodies and clamping hardware within the same system. Does the insert require special clamping because of the hole and countersink? The cylindrical hole with a dual countersink (40°–60°) ensures secure seating and consistent orientation when used with compatible clamping systems; proper torque and seating geometry are recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNCU 0905GN AH3135 Wendeplatten - Tungaloy
Benefit from the combination of high material-removal rates, wear-resistant PVD coating and dependable edge control for continuous high-feed milling performance; order the PNCU0905GN AH3135 insert directly via Metav Werkzeuge or consult the technical team for application advice. PNCU 0905GN AH3135 – Pentagonal indexable insert for milling (DoFeed, Tungaloy) A PNCU 0905GN AH3135 pentagonal indexable insert designed for high-feed milling, pocketing and face machining within the DoFeed family. DoFeed high-feed milling family PVD-coated carbide for edge stability Pentagonal shape for five-index use Cylindrical hole with 40°–60° countersink Maximise throughput with high-feed milling The DoFeed-series geometry is engineered to deliver high-feed milling capability while keeping axial engagement low, enabling significantly increased material removal rates without compromising stability. The insert supports large volumetric removal with small axial depths, which translates into shorter cycle times and improved productivity on repetitive pocketing and face operations. The combination of the pentagonal form and the positive geometry reduces cutting forces, so the tooling system maintains consistent performance under elevated feed per tooth and contributes to a smoother production flow. Durable cutting edge for consistent process security The AH3135 grade is a PVD-coated carbide formulation developed for wear resistance and fracture toughness in milling contexts where a sharp cutting edge and process security are required. This grade offers stable chip formation and a reliable cutting edge under interrupted cuts common in pocketing and contouring. The coating improves thermal and abrasive resistance, extending the effective life of the insert and reducing tool-change frequency. As a result, machining runs show improved repeatability and fewer unplanned interruptions, which supports higher overall equipment effectiveness. Practical interface and secure seating for robust clamping The pentagonal plate features a cylindrical hole with a double-sided countersink (40°–60°) and a 0° relief, enabling secure seating and straightforward indexing for up to five cutting positions. The 5.56 mm thickness and standard size 09 match common DoFeed holders, simplifying tool assembly and inventory management. Dual-sided chipbreakers support stable chip control in diverse cutting conditions, and the insert’s geometry is optimised for predictable cutting behaviour. Clear specifications and a standardised interface facilitate rapid integration into existing milling tool systems and ease the selection of replacement plates. For application support, toolholder matching or availability of the PNCU 0905GN AH3135 insert contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for fast technical guidance and supply information Technical data Article number: 6716057 Manufacturer article number: 6716057 SKU: 6716057-Tungaloy Manufacturer SKU: TUN6716057 Facts Angle: 108° Plate thickness: 5.56 mm Size: 09 Clearance angle: 0° Countersink angle range: 40°–60° Design and special features Material: Hartmetall Coating: PVD Model series: DoFeed Application: Milling (high-feed, pocketing, face milling) Plate form: pentagonal Hole: with cylindrical hole + double-sided countersink Chipbreaker: double-sided Indexing: five usable edges FAQ What applications are best suited to this insert? The PNCU 0905GN AH3135 insert is intended for high-feed milling, pocketing and face machining within the DoFeed family, where large time‑span volumes are required at small axial depths. How does the AH3135 grade affect performance? The AH3135 grade, with its PVD-coated carbide composition, provides enhanced wear resistance and fracture toughness, promoting a sharp cutting edge and consistent process security during milling. How many cutting positions does the pentagonal insert provide? The pentagonal shape allows up to five indexable cutting edges, enabling multiple reuses before replacement and reducing tooling cost per edge. What are the mounting and seating characteristics of the insert? The insert is supplied with a cylindrical hole and a double-sided countersink (40°–60°) for secure seating and reliable clamping in compatible DoFeed holders. Is the insert suitable for interrupted cuts and pocketing? Yes; the geometry and chipbreaker design are optimised for stable chip control and resistance to edge chipping during interrupted milling typical of pocketing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNCU 0905GN AH3225 Wendeplatten - Tungaloy
Take advantage of the DoFeed concept and the AH3225 PVD-coated carbide to increase material removal rates while keeping axial depths low; the pentagonal geometry and secure hole design ensure repeatable seating and reduced vibration, supporting stable, productive milling operations. Order directly via Metav Werkzeuge or consult our technical team for application guidance. PNCU 0905GN AH3225 indexable insert for milling — Tungaloy PNCU 0905GN AH3225 is a pentagonal indexable insert developed for high-feed milling, designed to deliver large chip volumes with small axial depths for efficient pocket and face operations DoFeed series optimised for high-feed milling PVD-coated AH3225 carbide for wear resistance Pentagonal 09 form with 5.56 mm thickness Cylindrical hole with double countersink (40°–60°) Faster cycle times through high-feed optimisation The DoFeed family is engineered for high-feed milling, enabling substantially higher material removal per tooth at reduced axial depths. This leads to shorter cycle times and improved productivity in pocketing and face operations. The PVD-coated AH3225 grade combines a hard, wear-resistant surface with a substrate tuned for fracture resistance; the result is a sharp cutting edge that retains its form under intermittent loading, helping to maintain process security and consistent part quality. Stable seating and geometry for reliable cutting A robust geometry underpins repeatable performance: the pentagonal plate form and 09 size provide multiple usable cutting positions, while the 5.56 mm plate thickness and 108° cutting angle give solid support under load. The insert features a cylindrical hole with a double countersink (40°–60°), which distributes clamping forces evenly and reduces micro-movement at the seat. Together with the double-sided chipbreaker, these elements reduce vibration and edge chipping, translating into longer tool life and more consistent surface finish. Practical use and process guidance for best results This indexable insert is suitable for typical high-feed applications such as pocketing and face milling where a sharp edge and process stability are required. The PVD coating (physical vapour deposition) forms a thin, hard layer that enhances wear resistance and increases edge strength without compromising toughness. The insert is supplied for use in matching milling bodies with the appropriate screws and clamping systems; selecting the correct body and clamping torque supports repeatable indexing and safe regrinding cycles. For complex setups or uncommon materials, further process data can be provided. Contact Metav Werkzeuge today to discuss Tungaloy DoFeed inserts, request application guidance or check availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6797265 SKU: 6797265-Tungaloy Manufacturer SKU: TUN6797265 Brand: Tungaloy Series: DoFeed Application: Milling Facts Plate thickness: 5.56 mm Cutting edge angle: 108° Relief angle: 0° Size: 09 Special features PVD-coated carbide (AH3225) Pentagonal plate form Double-sided chipbreaker Cylindrical hole with double countersink (40°–60°) System: milling body, matching indexable inserts and screws FAQ What applications is this insert suited for? The PNCU 0905GN AH3225 insert from Tungaloy is intended for high-feed milling, including pocket and face milling where large chip volumes are required with low axial engagement. What advantages does the AH3225 grade provide? AH3225 is a PVD-coated carbide grade that offers wear resistance and increased edge strength, making the insert suitable when a sharp cutting edge and process security are priorities. How does the insert geometry support stability? The pentagonal plate shape, 5.56 mm thickness, 108° angle and the cylindrical hole with double countersink promote even clamping force distribution and minimise micro-movement, enhancing repeatability during indexing. Is the insert intended for a specific tool system? The insert is part of the DoFeed system and is supplied to be used with matching milling bodies and fixing screws; correct pairing ensures secure clamping and consistent performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNCU 0905GN AH3225 Wendeplatten - Tungaloy
The combination of high-feed performance, PVD-coated AH3225 grade and a stable pentagonal form delivers efficient metal removal with reliable tool life; ideal for pocketing and face milling where small axial depths and large time-chip volumes are required. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. PNCU 0905GN 0905GN AH3225 for high-feed milling — Tungaloy PNCU 0905GN AH3225 is a pentagonal, PVD-coated carbide insert designed for high-feed milling applications and pocketing with low axial depths PVD-coated carbide AH3225 for wear resistance Pentagonal 09 insert, 5.56 mm thickness 108° geometry with 0° relief angle Cylindrical hole with double countersink 40°–60° Run more material per pass with controlled axial engagement The DoFeed model family is engineered for high-feed milling, enabling large time-chip volumes at small axial depths. This geometry reduces the required axial engagement while maintaining high metal removal rates, which increases throughput on pocketing and face-milling operations. The design translates directly into shorter cycle times and improved utilisation of machining centres, supporting predictable production planning and enhanced process efficiency. Durable edge and coating for consistent performance The insert’s PVD-coated AH3225 grade (a wear- and fracture-resistant carbide) combines a sharp cutting edge with process security, reducing the frequency of indexing and regrinding. The coating improves surface hardness and adhesion, which helps to maintain a consistent edge condition under interrupted cuts typical of pockets and faces. This results in fewer unplanned tool changes and a steadier part finish across batch runs. Secure seating and economical edge usage The pentagonal form and 5.56 mm plate thickness provide a stable platform for clamping in a compatible milling body; the double-sided construction effectively doubles available cutting edges per insert. The central cylindrical hole with double-sided countersink (40°–60°) ensures repeatable seating and torque distribution, while the double-sided chipbreaker aids chip control and evacuation. Together these features reduce vibration, improve tool life, and lower per-edge costs through multiple indexings. Where to apply this insert and system considerations Intended for conventional high-feed milling tasks such as pocketing and planing, the insert is supplied as part of a system comprising the milling body, matching PNCU 0905GN inserts and fixing screws. The 108° main cutting geometry with a 0° relief angle offers a balance between strength and cutting accessibility. For optimal results, select the matching milling body and tightening torque recommended by the toolholder manufacturer and validate cutting parameters on representative workpieces before series production. For high-feed milling operations where process security and sustained edge life matter, choose the Tungaloy PNCU 0905GN AH3225 insert and order via Metav Werkzeuge or contact their technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 for application support Technical data Article number: 6797262 Facts Size: 09 Plate thickness: 5.56 mm Main angle: 108° Relief angle: 0° Manufacturer SKU: TUN6797262 System: DoFeed Application: Fräsen Special features Grade: AH3225 (PVD-coated carbide) Plate form: pentagonal Hole: with cylindrical hole and double countersink (40°–60°) Chipbreaker: double-sided Design: double-sided insert, multiple indexable edges Typical use: high-feed milling, pocketing, face milling FAQ What machining tasks suit this insert best? The PNCU 0905GN AH3225 insert is optimised for high-feed milling operations such as pocketing and face milling where large time-chip volumes are required with shallow axial depths. How does the AH3225 grade improve performance? The AH3225 PVD-coated carbide provides enhanced wear and fracture resistance, offering a sharper edge and greater process security for demanding milling cycles. How many indexing positions does the pentagonal insert provide? The pentagonal, double-sided design provides multiple indexable edges to extend service life and reduce per-edge cost when used in a compatible DoFeed milling system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNCU 0905GN AH725 Wendeplatten - Tungaloy
Take advantage of the combination of high material removal capability, a universal PVD-coated grade and secure pentagonal indexing to keep cycle times low and process security high; order directly via Metav Werkzeuge or ask the consultants for application support. PNCU0905GN AH725 Tungaloy PNCU 0905GN pentagonal indexable insert — DoFeed high-feed milling The PNCU0905GN AH725 Tungaloy insert is a pentagonal indexable cutting insert developed for high-feed milling, pocketing and face machining in mixed and stainless steel applications DoFeed series for high-feed milling PVD-coated AH725 universal grade Pentagonal 09 format, 5.56 mm thickness Cylindrical hole with double countersink 40°–60° High-feed performance with minimal axial depth The DoFeed family is engineered to deliver large time-volume removal at very small axial depths, which enables substantially shorter cycle times on milling tasks that demand high productivity. The combination of the high-feed milling concept and the pentagonal form offers five index positions, increasing usable edge life and minimising tool change frequency. The neutral relief with 0° clearance supports steady cutting forces, while the 108° included angle spreads the load across the insert, reducing peak stresses and improving stability during pocket and face machining. Universal, PVD-coated grade for mixed workpieces The PVD-coated AH725 is a universal, fracture-resistant carbide grade tailored for machining both steel and stainless steels under varying conditions. Its coating enhances wear resistance and contributes to consistent edge life when materials change from one batch to another. This universality reduces the need for multiple grades in the tool store and supports process security in mixed-production environments; the result is fewer stoppages and a more predictable production rhythm for shops that work with different steels. Secure clamping and precise geometry for repeatable results The pentagonal plate in 09 format with a plate thickness of 5.56 mm and a cylindrical hole with double-sided countersink (40°–60°) ensures reliable location and repeatable clamping when used with the matching milling body and screws. The double-sided chipbreaker geometry aids chip control in interrupted and pocket milling, reducing re-cutting of chips and lowering the risk of edge damage. These design elements together provide a robust interface between toolholder and insert, supporting consistent surface finish and reduced inspection rework. Process benefits and application guidance When applied to high-feed finishing and pocketing, this insert helps lower machining time while maintaining a fine surface quality, thanks to its combination of geometry and grade. The insert is especially suitable for smaller tools and operations with high demands on process stability. For practical implementation, pairing the plate with a correctly specified DoFeed milling body and recommended cutting parameters will yield the intended advantages in cycle time and tool life. For technical clarifications or application data, Metav Werkzeuge provides practical advice and cutting parameter recommendations to support safe integration into production Contact Metav Werkzeuge for tailored application advice and prompt supply of Tungaloy DoFeed inserts and compatible components Technical data Article number: 6860100 Manufacturer SKU: TUN6860100 SKU: 6860100-Tungaloy Manufacturer: Tungaloy Core measurements Plate format: 09 Plate thickness: 5.56 mm Included angle: 108° Clearance angle (relief): 0° Shape: pentagonal Special features Grade/coating: AH725, PVD-coated carbide Material: carbide Series: DoFeed (high-feed milling family) Application: milling, pocketing, planing Hole style: cylindrical hole with double-sided countersink (40°–60°) Chipbreaker: double-sided System composition: milling body with matching inserts and screws FAQ What materials is this insert suitable for? The PNCU0905GN AH725 Tungaloy insert is specified for machining steel and stainless steels and is optimised for applications involving changing workpiece materials. How does the pentagonal shape improve productivity? A pentagonal indexable insert provides five usable cutting edges, which increases net cutting-edge availability and reduces frequency of insert replacement in high-feed milling operations. Is the grade suitable for small-diameter tooling? The AH725 PVD-coated grade is formulated to be fracture-resistant and is appropriate for smaller tool diameters where process security is critical; the PNCU0905GN AH725 Tungaloy plate benefits such tool setups. What clamping features ensure repeatability? The combination of a cylindrical hole with a double-sided countersink (40°–60°) and the defined plate thickness ensures secure seating and repeatable axial and radial positioning when used with the correct DoFeed milling body. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNCU 0905GN AH8015 Wendeplatten - Tungaloy
Benefit from the combination of the DoFeed high-feed geometry, PVD-coated AH8015 grade and pentagonal form for productive, reliable milling. Order directly via Metav Werkzeuge or consult our team for application advice. PNCU 0905GN AH8015 – PNCU indexable insert for milling (DoFeed) by Tungaloy The PNCU 0905GN AH8015 is a pentagonal indexable insert engineered for high-feed milling, delivering high material removal with small axial depths in pocketing and face-milling tasks. High-feed geometry for large chip volume PVD-coated AH8015 grade for heat-resistant alloys Pentagonal form with five usable edges Cylindrical hole with double countersink for secure clamping Increase productivity with high-feed design The DoFeed family is optimised for high-feed milling, allowing substantial material removal while maintaining minimal axial engagement. This configuration produces large chip volumes per pass, reducing cycle times on repetitive pocketing and face operations. The insert’s geometry supports stable cut entry and enhanced feed per tooth, which translates into fewer passes for the same material removed. Combined with the PVD-coated grade, the solution is geared towards sustained performance in demanding sequences without sacrificing process stability. Balanced wear resistance and edge stability for heat-resistant alloys The AH8015 grade is a PVD-coated carbide chosen for general machining of heat-resistant alloys; it offers an equilibrium between wear resistance and cutting-edge stability. The pentagonal shape provides five indexed cutting edges, improving cost efficiency per edge change and ensuring consistent surface finish over multiple indexes. The insert thickness of 5.56 mm and a 0° rake angle contribute to robustness at the cutting edge, while the 108° approach angle helps distribute cutting forces, reducing the risk of chipping in interrupted cuts and enhancing repeatable results. Secure mounting and system compatibility for dependable operation Designed as part of a system, the insert complements matching milling bodies and fastening screws for reliable clamping and repeatable positioning. The central cylindrical hole with a double-sided countersink (40°–60°) ensures precise seating and stable torque transfer, which is crucial when running high-feed parameters. The double-sided chipbreaker supports controlled swarf formation and evacuation, lowering the chance of recutting and preserving tool life. This systematic approach simplifies assembly and creates a predictable, productive tool setup for job shops and production lines alike. Contact Metav Werkzeuge for tailored application guidance on Tungaloy inserts and to confirm suitability for specific materials and milling conditions. Technical data Article number: 6797263 Manufacturer SKU: TUN6797263 ISO designation: 0905GN Model series: DoFeed Insert designation: PNCU0905GN AH8015 Material: carbide Facts Thickness: 5.56 mm Size: 09 Approach angle: 108° Rake angle: 0° Countersink angle: 40°–60° Special features Pentagonal insert form Double-sided chipbreaker PVD-coated grade AH8015 Cylindrical hole with double countersink System: milling body, matching indexable inserts and screws Typical application: milling, pocketing and face operations FAQ What applications suit this insert best? The PNCU 0905GN AH8015 insert is designed primarily for high-feed milling, pocketing and face-milling where large chip volumes with small axial depths are required. Is the AH8015 grade suitable for heat-resistant alloys? Yes, the AH8015 PVD-coated carbide grade balances wear resistance and edge stability, making it a first choice for machining heat-resistant alloys. How many cutting edges are available per insert? Thanks to the pentagonal form, the insert provides five usable cutting edges before indexing is required. What ensures secure clamping of the insert? The central cylindrical hole with a double-sided countersink (40°–60°) provides accurate seating and reliable torque transmission for consistent clamping stability. Is this insert part of a larger tooling system? Yes, the insert is part of the DoFeed system and is used together with compatible milling bodies and fastening screws for repeatable setup and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNCU 0905GN AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of high-feed efficiency, PVD-coated AH8015 wear resistance and stable cutting-edge geometry for productive milling cycles; order the insert directly via Metav Werkzeuge or request specialist advice from our consultants. PNCU0905GN AH8015 indexable insert (pentagonal, 108°) for milling — Tungaloy The PNCU0905GN AH8015 is a pentagonal indexable insert designed for high-feed milling and pocketing, delivering large chip volumes at small axial depths while maintaining cutting-edge stability. DoFeed series for high-feed milling PVD-coated AH8015 carbide grade Pentagonal shape with 108° geometry Cylindrical hole with double-sided countersink Increase volumetric removal without raising axial depth The DoFeed family is engineered for high-feed strategies that raise material removal rate while keeping axial engagement low; this reduces tool load per pass and shortens cycle times. The PVD-coated AH8015 carbide grade provides a balanced mix of wear resistance and edge strength, making it a practical choice for machining heat-resistant alloys and general interrupted cutting. In practice, the insert supports aggressive feed rates on suitable milling bodies, converting the DoFeed concept into repeatable productivity gains. Secure clamping and stable edges for consistent surface finish A pentagonal plate with a 108° corner angle and a 0° rake creates a robust cutting geometry that resists chipping under heavy feed. The insert thickness of 5.56 mm contributes to rigidity, while the cylindrical hole combined with a double-sided countersink (40°–60°) ensures secure seating and repeatable orientation in the cutter body. The double-sided chipbreaker design delivers controlled chip formation and helps to preserve the cutting-edge profile, supporting consistent surface quality during pocketing and face-milling operations. Broad applicability with process reliability and system integration Designed as part of a milling system that pairs the insert with matching cutter bodies and fastening screws, the component is optimised for high material-removal tasks such as high-feed milling, pockets and planing operations. The AH8015 grade is explicitly intended as a first choice for heat-resistant alloys, offering a compromise between edge stability and longevity. Where operational consistency and predictable tool life are priorities, the configuration reduces downtime for edge changes and supports reliable production planning. For availability or detailed process recommendations on Tungaloy high-feed inserts, contact Metav Werkzeuge for a tailored quotation and technical consultation: eMail info@metav-werkzeuge.com | Tel. +49 2822 7131930 — Metav Werkzeuge can advise on compatible cutter bodies and application parameters Technical Data Manufacturer article number: 6797266 Merchant SKU: 6797266-Tungaloy Manufacturer SKU: TUN6797266 Manufacturer: Tungaloy Core data Geometry corner angle: 108° Rake angle: 0° Plate thickness: 5.56 mm Plate size: 09 Plate form: pentagonal Hole: with hole Countersink angle: 40°–60° Chipbreaker: double-sided Features / Applications Model series: DoFeed — high-feed milling family Coating / grade: AH8015 (PVD-coated carbide) Typical use: high-feed milling, pocket and face milling System composition: milling body, matching indexable inserts and screws Balanced wear resistance and edge stability for heat-resistant alloys FAQ What is the PNCU0905GN AH8015 best used for? The PNCU0905GN AH8015 indexable insert from Tungaloy is optimised for high-feed milling tasks such as pocketing and face milling where large chip volumes are needed at small axial depths. Which materials suit this insert? The AH8015 grade is intended as a first choice for machining heat-resistant alloys and is balanced for general applications that demand wear resistance combined with cutting-edge stability. What are the key geometric features of the insert? The insert features a 108° corner angle, 0° rake, 5.56 mm thickness, a pentagonal form and a cylindrical hole with a double-sided countersink (40°–60°) to ensure secure clamping. How does the pentagonal form affect indexing? The pentagonal shape offers five cutting corners and, combined with a double-sided design, provides multiple indexable positions to extend usable life before regrinding or replacement. Is the PNCU0905GN AH8015 part of a larger system? Yes, the component is part of the DoFeed milling system concept; the system comprises the milling body, matching indexable inserts and the necessary fastening screws for secure assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNCU 0905GN NS740 Wendeplatten - Tungaloy
High-performance finishing and stable wear are delivered by the combination of the DoFeed series geometry and the NS740 cermet grade; the pentagonal, 5.56 mm-thick carbide body provides consistent surface quality and reliable edge life for high-feed milling. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. PNCU 0905GN NS740 milling insert — pentagonal, 108° — Tungaloy PNCU 0905GN NS740 Tungaloy insert for high-feed milling and pocketing applications, designed for large time‑volume removal with small axial depths and a focus on surface finish and dimensional consistency NS740 cermet for fine surface quality Pentagonal form with five usable edges Optimised for high‑feed milling operations Cylindrical hole with double countersink 40°–60° Increased throughput with controlled cutting action The DoFeed family is engineered for high‑feed milling, where material removal per time unit is maximised while axial engagement remains low. The pentagonal geometry provides multiple indexable edges, extending effective tool life and reducing downtime for edge changes. Combined with the NS740 cermet grade — a cermet or coated cermet designed for finishing to light machining of steel — the insert balances wear resistance with a capacity for producing excellent surface quality, making it well suited for pocketing, face milling and similar operations where finish and tolerance matter. Secure clamping and vibration suppression for precise machining A robust clamping interface contributes directly to machining accuracy: the insert features a cylindrical hole with double countersink (40°–60°) to ensure reliable seating and centred screw engagement, while the 0° relief and a 108° included angle help distribute cutting forces across the insert body. The 5.56 mm plate thickness and pentagonal form increase rigidity and lower susceptibility to chatter, which supports consistent dimensional results and longer edge life in serial production. These details reduce the need for frequent rework and support stable process windows. Application-focused economy and predictable performance Adopting this insert in compatible milling bodies yields a clear cost‑efficiency advantage: fewer tool changes, predictable wear progression and reproducible finishes shorten cycle times and simplify downstream operations. The DoFeed concept targets large time‑span volumes with small axial feeds, and the material specification emphasises uniform wear for repeatable parts quality. The PNCU0905GN NS740 Tungaloy insert is therefore an economical choice where productivity and finish are both priorities, offering straightforward indexability and simple stock management for production environments. For tailored recommendations on using Tungaloy DoFeed inserts in demanding steel machining tasks, contact Metav Werkzeuge for application advice, availability and order coordination Technical data Article number: 6797264 SKU: 6797264-Tungaloy Manufacturer SKU: TUN6797264 Model series: DoFeed Type designation: PNCU0905GN Grade: NS740 Material: carbide Country of origin: not specified Core data Plate thickness: 5.56 mm Size: 09 Included angle: 108° Relief angle: 0° Hole style: cylindrical hole with double countersink 40°–60° Plate form: pentagonal Features and applications Designed for high‑feed milling Suitable for pocketing and face milling System comprises milling body, matching indexable inserts and screws Grade intended for finishing to light machining of steel with emphasis on surface quality and even wear FAQ Is this insert suitable for high‑feed milling? Yes. The DoFeed geometry is specifically designed for high‑feed milling operations; the PNCU0905GN NS740 insert is optimised to deliver large time‑span volumes at low axial depths while maintaining dimensional stability. Which materials is the NS740 grade intended for? The NS740 cermet grade is aimed at finishing to light machining of steel, with a focus on achieving good surface quality and consistent wear; it is specified primarily for steel applications in the product data. How many cutting edges are available per insert? The pentagonal plate shape provides five usable indexable edges, allowing multiple re‑indexes before replacement and improving overall tool economy. What is the purpose of the double countersink and the hole design? The cylindrical hole with a double countersink (40°–60°) ensures centred screw seating and secure clamping, which contributes to stable cutting conditions and repeatable positioning on the cutter body. Are there special mounting requirements for this insert? Ensure the insert is used in a compatible milling body designed for PNCU‑type plates and that clamping screws match the countersunk hole profile; correct seating and torque are essential to exploit the insert's rigidity and to prevent movement under load. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
PNCU 0905GN NS740 Wendeplatten - Tungaloy
Take advantage of high-feed capability, the NS740 cermet grade for superior surface finish and consistent wear, and the pentagonal geometry for multiple indexable edges; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. PNCU 0905GN NS740 indexable insert for milling – Tungaloy PNCU 0905GN NS740 is an indexable insert designed for high-feed milling and light finishing operations in steel, forming part of the DoFeed family for efficient pocket and face milling. High-feed milling family DoFeed NS740 cermet for fine surface finish Pentagonal shape for multiple edges Cylindrical hole with 40°–60° countersink Delivering high-feed performance with fine surface quality The DoFeed family is engineered for high-feed milling, enabling large time‑material removal rates with small axial depths. The NS740 grade is a cermet / coated cermet designed for finish to light machining of steel, prioritising surface finish and dimensional accuracy while promoting even wear across the cutting edge. The insert PNCU0905GN sits in this system to combine efficient material removal with the control needed for precision components. Secure clamping and indexability for uninterrupted production A pentagonal plate form provides several indexable cutting edges, improving tool economy and reducing changeover time. The plate features an included angle of 108° and a cylindrical hole with double-sided countersink (40°–60°) to match positive clamping systems and ensure secure seating in compatible milling bodies. These design elements contribute to stable cutting conditions and consistent part quality throughout a production run. Substrate and coating tuned for consistent tool life Manufactured on a cemented carbide substrate and offered as a cermet or coated cermet, the grade emphasises stable chip formation and controlled wear progression. This combination supports repeatable dimensions and high surface integrity when machining steel, while the material selection helps maintain edge geometry under the elevated feed rates typical of DoFeed applications. Practical advantages for productivity and process reliability With a plate thickness of 5.56 mm and a double-sided chipbreaker, the insert balances rigidity and effective chip control for pocketing and face milling tasks. A 0° clearance (free angle) and the pentagonal geometry allow straightforward edge indexing. Used with the correct DoFeed milling bodies and fastening hardware, the insert reduces cycle times and delivers a reliable route to improved throughput and finish quality. For sourcing, application matching or to discuss suitable milling bodies for the PNCU 0905GN, contact Metav Werkzeuge for expert guidance and prompt availability. Technical data Article number: 6888879 Manufacturer SKU: TUN6888879 SKU: 6888879-Tungaloy Dimensions & key values Insert designation: PNCU0905GN Included angle: 108° Plate size: 09 Plate thickness: 5.56 mm Clearance (free) angle: 0° Hole: with hole — cylindrical hole + double-sided countersink (40°–60°) Special features Model series: DoFeed (high-feed milling family) Cutting material: cermet or coated cermet (NS740) Substrate: cemented carbide Plate form: pentagonal Chipbreaker: double-sided Application: milling — high-feed milling, pocket and face milling Focus: surface finish, dimensional accuracy, even wear FAQ What is the primary application for this insert? The PNCU0905GN NS740 insert is designed for high-feed milling, including pocketing and face milling operations where finishing to light machining of steel is required. Which materials is the insert suitable for? The NS740 cermet grade is optimised for steel, delivering improved surface finish and dimensional control during light finishing operations. How does the pentagonal shape benefit production? The pentagonal form provides multiple indexable edges, extending the usable life per insert and reducing downtime for edge changes. What clamping features does the insert use? The plate includes a cylindrical hole with double-sided countersink (40°–60°) to ensure secure seating in compatible DoFeed milling bodies. Can the insert be used for roughing as well as finishing? PNCU0905GN is part of a high-feed family and is optimised for large time‑material removal rates at small axial depths; the NS740 grade is particularly suited to finishing to light machining, while the system design supports productive cutting in suitable roughing contexts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNCU 0905GN T1115 Wendeplatten - Tungaloy
Taking advantage of Tungaloy's DoFeed concept and the T1115 grade delivers a combination of high material removal rates, stable cutting-edge life and reliable chip control for demanding pocketing and face-milling operations; order the inserts directly via Metav Werkzeuge or contact their specialists for application advice. PNCU 0905GN T1115 indexable insert for high-feed milling - Tungaloy The PNCU0905GN T1115 is a pentagonal carbide indexable insert designed for high-feed milling, pocketing and face machining within the DoFeed family. DoFeed series for high-feed milling Pentagonal insert with 108° approach angle Cylindrical hole with double-sided countersink Faster material removal with small axial depths The DoFeed family is engineered to produce large time‑chip volumes at small axial depths, enabling higher productivity without increasing cutting depth. The pentagonal geometry together with the 108° approach angle spreads cutting forces and permits stable engagement in pocketing and face operations. This design reduces the number of tool changes per job and shortens cycle times while maintaining surface quality, making the solution particularly suitable for series production and heavy removal strategies. Durable grade and reliable chip control for longer runs The T1115 grade is a Tungaloy carbide formulation balanced for wear resistance, toughness and edge stability, which means fewer unexpected regrinds and more predictable tool life. The insert’s double-sided chipbreaker improves fragmenting and evacuation of chips during interrupted cuts, helping to avoid recutting and thermal concentration. Paired with suitable milling bodies and clamping screws from the DoFeed system, the insert provides secure clamping and reproducible performance on continuous shifts. Design details that reduce setup time and improve consistency With a pentagonal plate form, the insert offers multiple indexable edges, while the cylindrical hole with a double-sided countersink (40°–60°) ensures straightforward and repeatable seating in the cutter body. The nominal plate thickness of 5.56 mm contributes to stiffness and resistance to edge breakdown, especially under the lateral loads typical of high-feed strategies. Using these technical features together leads to shorter setups, consistent part dimensions and fewer process interventions on the shopfloor. Contact Metav Werkzeuge for availability of Tungaloy DoFeed inserts and practical application guidance; email info@metav-werkzeuge.com or call +49 2822 7131930 to verify suitability for the intended milling task Technical data Article number: 6879073 Manufacturer SKU: TUN6879073 Label: PNCU0905GN T1115 Tungaloy-Wendeplatte Model series: DoFeed Application: Fräsen Facts Plate form: pentagonal Plate size: 09 Plate thickness: 5.56 mm Approach angle: 108° Clearance angle: 0° Countersink angle: 40°–60° Special features Material: Hartmetall (carbide) Grade/coating: T1115 Chipbreaker: double-sided Hole style: cylindrical hole with double-sided countersink System composition: milling body, matching indexable inserts and screws Typical applications: high-feed milling, pocketing and face machining FAQ What materials is this insert suitable for? The PNCU0905GN T1115 indexable insert is supplied in a carbide grade designed for general milling applications; suitability depends on the workpiece material and cutting parameters. Can the plate be used for pocketing and face milling on the same tool body? Yes, the DoFeed family and the pentagonal geometry of this insert are intended for both pocketing and face operations when mounted in the correct milling body. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker on this insert improves chip control during interrupted cuts and reduces recutting, which supports consistent surface finish and longer cutting edge life. Is the insert compatible with standard DoFeed milling cutters? The insert is part of the DoFeed system; it is intended to be used with matching DoFeed milling bodies and clamping screws for secure seating and repeatable performance. What advantages does the 108° approach angle provide? The 108° approach angle spreads cutting forces and supports high-feed strategies at small axial depths, enhancing productivity while reducing cutting stress per edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNCU 0905GN T1215 Wendeplatten - Tungaloy
Take advantage of the Tungaloy DoFeed concept: the combination of a robust T1215 carbide grade, a pentagonal 09 format and a 108° cutting geometry delivers high material removal rates at small axial depths with stable edge life. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice and cutting-parameter recommendations. PNCU0905GN T1215 — Indexable insert for high‑feed milling by Tungaloy PNCU0905GN T1215 is an indexable milling insert designed for high‑feed operations such as pocketing and face milling where large time‑material volumes must be removed with small axial cuts. DoFeed high‑feed family for high productivity Pentagonal 09 format, 5.56 mm thickness Tungaloy T1215 grade for wear and toughness balance Increased productivity through high‑feed geometry The DoFeed series is configured to enable large material removal with shallow axial engagement. The pentagonal 09 insert geometry and the 108° cutting angle reduce cutting forces per tooth, allowing higher feed rates and more stable machining cycles. Because the grade T1215 combines wear resistance with edge toughness, the insert maintains cutting-edge integrity under interrupted or heavy chip loads. This leads to predictable tool life and fewer indexings per part, improving throughput on the machine. Secure seating and versatile clamping reduce setup time The insert is supplied with a cylindrical hole and a double‑sided countersink (40°–60°) to ensure consistent locating and secure clamping in compatible holders. The 5.56 mm thickness and pentagonal shape permit multiple effective edges per insert, lowering tooling costs per edge and simplifying inventory. In practice, the geometry results in reliable seat repeatability and quick insert changes, which contributes to shorter downtime during tool swaps. Suitable for a wide range of milling tasks with clear handling benefits Manufactured from cemented carbide and finished in the proven Tungaloy material family, the insert is aimed at high‑feed milling, pocketing and face machining of many workpiece materials. The double‑sided chipbreaker improves chip control across both cutting directions and the 0° relief angle supports stable cutting in low‑clearance setups. For users less familiar with indexable tooling, the advantages translate into easier programming, more consistent surface quality and reduced secondary operations. For high‑feed milling applications, contact Metav Werkzeuge for availability of the Tungaloy PNCU0905GN T1215 insert (SKU 6770099‑Tungaloy) and tailored advice on optimal cutting speeds and feeds. Technical data Article number: 6770099 Manufacturer SKU: TUN6770099 SKU: 6770099-Tungaloy Facts Thickness: 5.56 mm Shape: pentagonal Size: 09 Cutting angle: 108° Relief angle: 0° Hole: with hole Hole style: cylindrical hole + double‑sided countersink (40°–60°) Special features Grade: T1215 (Tungaloy) Material: cemented carbide Series: DoFeed high‑feed milling family Chipbreaker: double‑sided FAQ What applications is this insert best suited for? The PNCU0905GN T1215 insert is intended for high‑feed milling, including pocketing and face milling operations where large time‑material volumes must be removed with small axial depths. Which material is the insert made from and what benefits does it offer? The insert is made of cemented carbide in Tungaloy’s T1215 grade, offering a balance of wear resistance and toughness that supports extended edge life under demanding milling conditions. How does the pentagonal shape affect performance? A pentagonal shape provides multiple usable edges per insert and a stable contact area for clamping, which reduces tooling cost per edge and ensures repeatable seating during indexings. Is the insert compatible with high‑feed milling holders? Yes. The PNCU0905GN geometry and the DoFeed series design are specifically matched to high‑feed holders; the cylindrical hole with countersink ensures secure locating in compatible tool bodies. What chip control features are included? The insert incorporates a double‑sided chipbreaker, improving chip shaping and evacuation across both indexed edges to reduce re‑cutting and thermal load on the cutting edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
PNCU 0905GN T3225 Wendeplatten - Tungaloy
Benefit from the DoFeed series' high‑feed performance, the Tungaloy T3225 grade for balanced wear resistance and toughness, and a pentagonal, indexable design for reduced downtime — order the PNCU0905GN directly via Metav Werkzeuge or consult our specialists for application advice. PNCU 0905GN T3225 Pentagonal Insert for High‑Feed Milling — Tungaloy PNCU0905GN is a pentagonal indexable insert designed for high‑feed milling and pocketing operations with optimised chip control. High‑feed geometry for large time‑material removal rates Tungaloy T3225 grade balancing wear and toughness Pentagonal shape with 5.56 mm thickness Cylindrical hole with double countersink 40°–60° Reduce cycle time with high‑feed milling efficiency The DoFeed model series is engineered for high‑feed milling, delivering large time‑material removal at small axial depths. This approach reduces cycle times while keeping radial engagement low, which lowers spindle load and extends tool life. The T3225 carbide grade contributes a balanced combination of wear resistance and toughness, supporting sustained productive machining in pocketing and face milling. For operations that demand rapid material removal without compromising component integrity, this geometry and grade pairing offer quantifiable efficiency gains. Secure clamping and stable cutting edge for consistent results Thanks to its pentagonal shape and the cylindrical hole with double countersink (40°–60°), the insert provides repeatable positioning and secure clamping in compatible milling bodies. The double‑sided chipbreaker design improves chip control in interrupted cuts and pockets, promoting consistent surface finish and reducing rework. With a thickness of 5.56 mm and a leading angle of 108°, the insert supplies edge stability during high radial loads. The system concept includes matching milling bodies, corresponding indexable inserts and fixing screws to simplify tool assembly and reduce changeover time. Application scope and operational benefits in production environments Intended specifically for milling, the insert performs well in high‑feed strategies, pocket machining and planing where throughput and surface quality are priorities. The tool construction—carbide body with an application‑oriented grade—supports repeatable performance, which is particularly valuable in batch and serial production. The combination of geometry and grade reduces the need for frequent edge changes, enhancing process reliability. For engineering teams seeking a practical, technically clear milling solution, this insert offers adaptation to demanding workflows while maintaining predictable tool behaviour. Contact Metav Werkzeuge today for application recommendations and availability of the PNCU0905GN T3225 insert; technical specialists are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Manufacturer article number: 6774940 SKU (manufacturer): TUN6774940 Product SKU: 6774940-Tungaloy Model series: DoFeed Material: carbide Facts Plate thickness: 5.56 mm Insert size designation: 09 Main angle: 108° Clearance angle: 0° Countersink angle: 40°–60° ISO designation: 0905GN Design & Features Pentagonal plate form Double‑sided chipbreaker Cylindrical hole with double countersink Tungaloy T3225 grade Intended use: milling (high‑feed, pocketing, planing) System composition: milling body, matching indexable inserts and screws FAQ What machining tasks is this insert best suited for? The PNCU0905GN insert in T3225 grade is optimised for high‑feed milling, pocketing and face machining where high time‑material removal and good chip control are required. How does the T3225 grade affect performance? Tungaloy’s T3225 offers a balance of wear resistance and toughness, providing a stable cutting edge and longer life during heavy interrupted cuts typical of high‑feed operations. Is the insert reversible or single‑sided? The insert features a double‑sided chipbreaker, which supports two usable cutting positions per side depending on the specific pentagonal index arrangement and mounting method. Which clamping features improve repeatability? The cylindrical hole with double countersink (40°–60°) enables precise seating and repeatable clamping in compatible toolholders, reducing variation between indexings. What system components are required for mounting this insert? The DoFeed concept uses a compatible milling body, matching indexable inserts and fixing screws; the complete system ensures correct seat and secure mechanical retention for the insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNCU 0905GN TH10 Wendeplatten - Tungaloy
Take advantage of the combination of high material removal rates, low axial depth capability and a robust pentagonal geometry to accelerate milling cycles while maintaining surface quality; order the insert directly via Metav Werkzeuge or consult our technical team for application advice. PNCU 0905GN TH10 indexable insert, pentagonal 108° – Tungaloy (for milling) The PNCU 0905GN TH10 is a pentagonal indexable insert engineered for high-feed milling, optimised to deliver large time-chip volumes at small axial depths for pocketing and face milling operations. Pentagonal 108° geometry TH10 uncoated carbide for non-ferrous Central hole with countersink Designed for high-feed milling Boosted material removal with high-feed milling efficiency The DoFeed family focuses on high-feed milling where productivity depends on maximising volume removal at low axial engagement. The pentagonal shape and the 108° approach angle enable stable cutting with reduced chatter, resulting in consistently higher throughput. By combining large chip volumes with low axial depth, cycle times fall while the machine load remains controllable. This leads to measurable efficiency gains on series work and makes the insert suitable for demanding pocketing and face operations. Secure clamping and reliable geometry for consistent surfaces A stable tool‑holder interface is essential for repeatable results. The insert’s pentagonal geometry, central hole with a cylindrical bore and double-sided countersink (40°–60°) ensures secure location and even load distribution. The 0° clearance and the 5.56 mm plate thickness contribute to rigidity under heavy radial loads, reducing deflection and improving surface finish. The double-sided chipbreaker promotes predictable chip formation, which helps maintain machining stability and quality across long production runs. Low cutting forces and clean finishes with TH10 uncoated carbide The TH10 grade is an uncoated carbide developed as a sharp universal sort for non-ferrous materials, where a clean cutting edge lowers cutting forces and supports superior surface appearance. For aluminium, brass and softer alloys, the combination of edge sharpness and the insert’s geometry reduces burr formation and minimises built-up edge. The result is reduced rework and improved first-pass quality, while the robust substrate maintains wear resistance over extended use in production environments. For tailored advice on using the PNCU 0905GN TH10 insert in specific machines or materials, contact Metav Werkzeuge for application support and availability at info@metav-werkzeuge.com or call +49 2822 7131930; Metav Werkzeuge can assist with grade selection and cutting data. Technical Data Article number: 6860117 Manufacturer SKU: TUN6860117 SKU: 6860117-Tungaloy Facts Insert size: 09 Plate thickness: 5.56 mm Approach angle: 108° Clearance angle: 0° Countersink angle: 40°–60° Special features Pentagonal insert form Central cylindrical hole with double-sided countersink Uncoated carbide (TH10) Double-sided chipbreaker Model series: DoFeed Application: Milling FAQ What machining tasks is this insert best suited for? The insert is designed for high‑feed milling and is particularly suited to pocketing and face milling where large time‑chip volumes at small axial depth are required; the PNCU0905GN TH10 performs well in these tasks. Is the TH10 grade coated or uncoated and what are the benefits? The TH10 grade is an uncoated carbide chosen for its sharp edge and low cutting forces, providing clean surface finishes on non‑ferrous materials when using the PNCU0905GN insert. How does the pentagonal shape affect productivity? The pentagonal geometry increases indexable edge options and improves stability; combined with the 108° approach angle, it supports higher material removal rates with reduced vibration. What mounting or clamping features ensure secure use of the insert? A central cylindrical hole with a double‑sided countersink (40°–60°) provides reliable location and even clamping force, enhancing repeatability and surface quality during milling. Can this insert be used on aluminium and brass? Yes; the TH10 uncoated carbide and the insert geometry are well suited to aluminium, brass and similar non‑ferrous alloys, promoting low cutting forces and good surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNCU0905GN 0905GN T3130 Wendeplatten - Tungaloy
PNCU 0905GN T3130 Tungaloy-Wendeplatte zum Fräsen Die PNCU 0905GN T3130 ist eine pentagonale Wendeplatte der Modellserie DoFeed, entwickelt für Hochvorschubfräsen, Taschen- und Planbearbeitung mit hohem Zeitspanvolumen bei kleinen axialen Zustellungen. Pentagonal Wendeplatte für Hochvorschubfräsen Beschichtungssorte T3130 für Standfestigkeit Zylindrisches Loch mit doppelseitiger Senkung Plattendicke 5,56 mm für stabile Schnittbedingungen Doppelseitiger Spanbrecher für kontrollierte Späne Produktivität steigern durch gezielte Geometrie und Werkstoff Die PNCU 0905GN T3130 kombiniert eine speziell abgestimmte Geometrie mit dem Hartmetall-Schneidstoff der Sorte T3130, um bei kleinen axialen Zustellungen große Zeitspanvolumina effizient zu bearbeiten. Die pentagonale Form ermöglicht mehrere Schnittkanten pro Platte und sorgt so für eine wirtschaftliche Nutzung. Durch die optimierte Schneidkantenstabilität werden Standzeiten verlängert und Stillstandskosten reduziert. Präzise Spansteuerung für konstant hohe Oberflächenqualität Dank des doppelseitigen Spanbrechers und der senkungsoptimierten Lochausführung werden Späne zuverlässig kontrolliert und die Spanabfuhr verbessert. Das Ergebnis ist eine konstante Oberflächengüte bei wiederholgenauer Bearbeitung. Die kombinierte Wirkung von Schnittgeometrie und Schneidstoff verbessert die Prozesssicherheit bei Taschen- und Planbearbeitung. Robustheit und einfache Aufspannung für den Produktionsalltag Die Auslegung mit Plattendicke 5,56 mm und der Lochausführung mit zylindrischem Loch sowie doppelseitiger Senkung (40°–60°) erleichtert die sichere Befestigung im Fräskörper. Dadurch reduziert sich Vibrationsempfindlichkeit, was die Bearbeitungsstabilität erhöht. Die Platte ist für den Einsatz im Hochvorschub optimiert und unterstützt produktive Schnittparameter. Zielgruppe und Anwendungsnutzen Konzipiert für Betriebe, die effiziente Hochvorschub-Frässtrategien einsetzen, eignet sich die Platte für Serienfertigung und Lohnbearbeitung gleichermaßen. Anwender profitieren von langer Standzeit, einfacher Handhabung beim Plattenwechsel und der Flexibilität, verschiedene Werkstoffe in Serienprozessen zuverlässig zu bearbeiten. Empfehlung: Die PNCU 0905GN T3130 von Tungaloy ist ideal für produktive Hochvorschub-Anwendungen — bei Fragen zur Einsatzoptimierung oder Schnittdaten steht Metav Werkzeuge gern zur Verfügung, 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 Produktmerkmale Artikelnummer: 6888878 Marke: Tungaloy Modellserie: DoFeed Bezeichnung: PNCU0905GN T3130 Tungaloy-Wendeplatte Hersteller SKU: TUN6888878 Fakten Winkel: 108° Freiwinkel: 0° Plattendicke: 5,56 mm Plattengröße: 09 Plattenform: pentagonal Loch: mit Loch Besonderheiten Material: Hartmetall Sorte: T3130 (Verschleißfestigkeit, Zähigkeit, Schneidkantenstabilität) Spanbrecher: doppelseitig Lochstil: zylindrisches Loch + doppelseitige Senkung (40°–60°) Einsatzgebiet: Fräsen, Hochvorschubfräsen, Taschenbearbeitung, Planbearbeitung Systemaufbau: Fräskörper, passende Wendeschneidplatten und Schrauben Modellserie: DoFeed FAQ Welche Einsatzbereiche deckt die PNCU 0905GN T3130 ab? Die PNCU 0905GN T3130 von Tungaloy ist für Hochvorschubfräsen, Taschen- und Planbearbeitung ausgelegt und eignet sich besonders für Prozesse mit großen Zeitspanvolumina bei kleinen axialen Zustellungen. Wie wirkt sich die Sorte T3130 auf die Standzeit aus? Die Schneidstoffsorte T3130 bietet eine ausgewogene Kombination aus Verschleißfestigkeit und Zähigkeit, wodurch die Standzeit bei anspruchsvollen Fräsbedingungen erhöht und die Schneidkantenstabilität verbessert wird. Welche Vorteile bringt das pentagonale Plattenformat? Das pentagonale Format ermöglicht mehrere nutzbare Schnittkanten pro Platte und damit eine wirtschaftliche Nutzung sowie schnelle Plattenwechsel in Serienprozessen. Ist die Platte für schlechte Spanbedingungen geeignet? Der doppelseitige Spanbrecher und die senkungsoptimierte Lochausführung unterstützen kontrollierte Spanbildung und verbessern die Spanabfuhr auch bei schwierigen Spanbedingungen. Welche Befestigungsanforderungen hat die PNCU0905GN? Die Platte verfügt über ein zylindrisches Loch mit doppelseitiger Senkung (40°–60°) und ist für den Einsatz in den entsprechenden DoFeed-Fräskörpern mit passenden Schrauben ausgelegt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
PNMU 0905GN AH120 Wendeplatten - Tungaloy
High wear resistance and secure clamping make this insert a reliable choice for demanding milling tasks; the PVD-coated AH120 carbide and pentagonal form deliver extended tool life and stable chip control. Order the PNMU0905GN AH120 Tungaloy insert directly via Metav Werkzeuge or consult their specialists if further guidance is required. PNMU0905GN AH120 Tungaloy insert for milling — pentagonal, PVD-coated carbide A PNMU0905GN AH120 Tungaloy insert designed for use in Tungaloy milling systems, suitable for face, shoulder, slot, high-feed and contour milling depending on the assigned tool family PVD-coated carbide AH120 grade Pentagonal insert size 09, 5.56 mm thick 108° cutting angle with 0° relief Cylindrical hole and double countersink 40°–60° Reliable cutting performance through wear-resistant coating The AH120 PVD-coated carbide is specified for a combination of sharp cutting edge and process security. The coating improves thermal and abrasive resistance, which translates into longer tool life under interrupted and continuous milling conditions. For planing and shoulder operations the wear resistance reduces flank wear and helps maintain dimensional repeatability over extended tool life, supporting steady production throughput. Stable clamping and geometric design for secure indexing The pentagonal form offers multiple indexable edges for economical use of the insert, while the 5.56 mm thickness provides rigidity against deflection in heavy cuts. The insert’s cylindrical hole with a double-sided countersink (40°–60°) enables precise seating and reliable clamping on compatible tool bodies. The 108° cutting angle combined with a 0° relief creates a neutral geometry that is suitable where a balanced cut and predictable chip formation are required. Improved chip control and process reliability A double-sided chipbreaker on the insert faces supports controlled chip formation across a range of cutting depths, reducing the risk of chip jamming and improving surface finish. The combination of chip control and the PVD layer enhances process stability in interrupted cuts and complex contours. Where machine cycles demand reproducible results, this insert contributes to higher uptime and lower regrinding or replacement frequency. Compatibility guidance and application scope The insert is intended specifically for Tungaloy milling systems and must be used with a matching insert seat, geometry and milling body for guaranteed performance. The ISO designation 0905GN and the pentagonal format align it with tool families designed for face, shoulder, groove, high-feed and contour milling; selection should be based on the cutter body family and intended cutting conditions. The indexable design supports efficient tool management and cost-effective edge usage in production environments. For process-secure milling with the Tungaloy AH120 grade, contact Metav Werkzeuge for product support and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — their specialists can advise on tool-family compatibility and insertion parameters. Technical data Article number: 6999324 SKU: 6999324-Tungaloy Manufacturer SKU: TUN6999324 Model series: Fräswendeschneidplatten Designation: PNMU0905GN AH120 Material: carbide Coating/grade: AH120 (PVD-coated) Application: milling Core figures Insert thickness: 5.56 mm Insert size: 09 ISO code: 0905GN Cutting angle: 108° Relief (free) angle: 0° Countersink range: 40°–60° Special features Pentagonal insert shape Cylindrical hole with double-sided countersink Double-sided chipbreaker Designed for Tungaloy milling systems Suitable for face, shoulder, slot, high-feed and contour milling depending on tool family Indexable insert for multiple cutting edges FAQ Which milling operations suit this insert best? The PNMU0905GN AH120 insert is suitable for face, shoulder, slot, high-feed and contour milling when paired with the correct Tungaloy milling body and tool family. What is the material and coating of the insert? The insert is made from carbide with a PVD-coated AH120 grade, providing enhanced wear and thermal resistance for robust performance. How does the pentagonal form benefit production? The pentagonal shape provides multiple indexable cutting edges, maximising edge usage and improving cost-efficiency in high-volume machining with the PNMU0905GN insert. What does the 0° relief mean in practice? A 0° relief indicates a neutral clearance geometry that supports balanced cutting forces and predictable chip formation, beneficial for stability during interrupted cuts. Is secure clamping supported by the insert design? Yes, the cylindrical hole with a double-sided countersink (40°–60°) allows precise seating and reliable clamping when used with matching Tungaloy cutter bodies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNMU 0905GN AH3135 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide AH3135 grade and a pentagonal 09 geometry delivers secure edge life and multiple indexable edges for economical milling. Benefit from stable clamping via the central hole with countersink and consistent chip control in demanding operations. Order genuine inserts through Metav Werkzeuge or consult the technical team for application matching. PNMU0905GN AH3135 — Pentagonal indexable insert for milling (Tungaloy) PNMU0905GN AH3135 is a pentagonal indexable insert designed for use in Tungaloy milling systems, suitable for face, shoulder, slot, high-feed and contour milling depending on the assigned cutter family. PVD-coated carbide AH3135 for process security Pentagonal insert, size 09, 108° cutting angle Double-sided chipbreaker for consistent chip control Central hole with cylindrical bore and countersink Reliable cutting performance through a process-secure grade The PVD-coated AH3135 grade is formulated for wear resistance and resistance to chipping, making the insert appropriate where a sharp cutting edge and dependable performance are required. In practice, this coating reduces flank wear and preserves edge geometry under interrupted or continuous cuts, which supports reproducible cycle times and predictable tool change intervals. The component is supplied as a replaceable indexable insert to be used with compatible milling bodies; correct matching of the insert seat, geometry and cutter body is essential to secure the stated performance. Robust geometry and secure clamping for stable machining The pentagonal form offers multiple indexable edges and a compact effective cutting angle of 108°, providing a balance of strength and accessibility in shoulder and contour milling. The insert has a thickness of 5.56 mm and a central hole with cylindrical bore plus double-sided countersink (40°–60°), which allows positive clamping and accurate seating in the cutter. The double-sided chipbreaker is engineered to control chip formation across a range of feeds, improving surface finish and reducing recutting of chips. These design details contribute to stable cutting forces and extended edge life when correctly applied. Practical application notes and operational advantages The insert is suitable across a range of milling tasks when used in the appropriate Tungaloy milling system; typical uses include face, shoulder, slot, high-feed and contour milling as determined by the assigned tool family. Because insert seating and clamping affect repeatability, the system concept—comprising milling body, indexable insert, clamping screw and any backing pad—must be observed when replacing or specifying inserts. Spare inserts can reduce downtime and support continuous production. For technical pairing and process optimisation, the manufacturer's documentation or a consultative assessment is recommended to align feed, speed and cutter body selection with the chosen grade and geometry. Secure genuine Tungaloy PNMU0905GN AH3135 inserts from Metav Werkzeuge for reliable, process-oriented milling; contact Metav Werkzeuge for bespoke application advice or matching to existing milling systems via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6999323 SKU: 6999323-Tungaloy Manufacturer SKU: TUN6999323 Dimensions & angles Insert geometry: pentagonal Size: 09 Thickness: 5.56 mm Cutting angle: 108° Relief / free angle: 0° Features & applications Cutting grade: AH3135 Material: carbide (hardmetal) Coating: PVD-coated Hole style: central cylindrical hole with double-sided countersink (40°–60°) Chipbreaker: double-sided Typical application: milling (face, shoulder, slot, high-feed, contour) System components: milling body, indexable insert, clamping screw, backing pad (as required) FAQ What cutter bodies are compatible with this pentagonal insert? Compatibility depends on the milling system; the PNMU0905GN AH3135 insert is intended for Tungaloy milling bodies that accept pentagonal 09 inserts with a central hole and corresponding clamping geometry. How many cutting edges are available per insert? The pentagonal shape provides multiple indexable edges; the exact number of usable edges per insert is determined by the insert indexation strategy and whether both sides are used. Does the AH3135 grade suit interrupted cuts and mixed operations? Yes, the PVD-coated AH3135 grade is formulated for wear and chipping resistance, providing process security in applications that include interrupted cutting, where edge robustness is required. What advantages does the central hole with countersink provide? The central hole with cylindrical bore and double-sided countersink (40°–60°) enables secure clamping and accurate seating, which helps maintain repeatability and reduces the risk of insert movement under load. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNMU 0905GN AH3225 Wendeplatten - Tungaloy
Take advantage of the combination of high process security, long tool life and reliable clamping for uninterrupted milling cycles; the PVD-coated AH3225 grade reduces tool changes and supports consistent part quality. Order compatible inserts via Metav Werkzeuge or consult the specialists for application-specific selection. PNMU0905GN AH3225 Indexable milling insert for milling (Tungaloy) A PNMU0905GN AH3225 indexable insert designed for versatile milling tasks, offering a sharp, wear-resistant cutting edge for stable, productive machining in compatible Tungaloy milling systems. PVD-coated carbide grade AH3225 Wear- and chipping-resistant cutting edge Pentagonal shape for multiple indexing Countersunk hole for secure clamping Improved productivity through wear-resistant coating and sharp edge The PVD-coated carbide combination of this insert delivers a measurable increase in productivity by extending tool life and maintaining a sharp cutting edge under intermittent and continuous loads. The AH3225 grade is formulated to resist both abrasive wear and edge chipping, which translates into fewer downtime events and reduced tooling costs per component. In high-throughput environments, the insert’s balanced hardness and toughness improve dimensional repeatability and contribute to predictable tool-change intervals, supporting lean production schedules and stable cycle times. Secure clamping and multi-edge economy for longer service life The pentagonal geometry offers five indexable edges, enabling economical reuse of every insert seat and contributing to reduced tooling consumption. With a 5.56 mm thickness and a nominal included angle of 108°, the design supports robust clamping forces while the 0° free angle assists in controlled chip formation for many milling strategies. The central aperture with a cylindrical hole and double-sided countersink (40°–60°) ensures reliable engagement with the clamping screw and underlay, so the cutting edge remains stable even during heavy cuts. The double-sided chipbreaker enhances chip control and surface finish, reducing rework and improving process consistency. System compatibility and typical applications for predictable results This insert is intended for use within matching Tungaloy milling systems: insert seat, geometry and milling body must be technically compatible to achieve the advertised performance. Typical operations include face milling, shoulder milling, slotting, high-feed milling and contour milling, depending on the associated tool family. The PNMU0905GN AH3225 insert is particularly suitable where a sharp edge and process security are required together, for example when machining demanding batches or mixed production runs that demand consistent surface quality and low scrap rates. Selecting the correct clamping hardware and following the tool supplier’s parameters will ensure repeatable results and maximise productivity. For optimal process security and application guidance with Tungaloy PVD inserts, ask Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6797261 Manufacturer SKU: TUN6797261 Our SKU: 6797261-Tungaloy Manufacturer: Tungaloy Model series: Fräswendeschneidplatten Application: Milling Facts Thickness: 5.56 mm Size designation: 09 ISO code: 0905GN Included angle: 108° Free angle: 0° Special features Pentagonal insert Double-sided chipbreaker With hole: cylindrical hole + double-sided countersink (40°–60°) PVD-coated carbide grade AH3225 Wear- and chipping-resistant grade Suitable for face, shoulder, slot, high-feed and contour milling Insert requires matching seat, geometry and milling body FAQ What materials is this insert suitable for? The PNMU0905GN AH3225 insert is a wear- and chipping-resistant PVD-coated carbide designed primarily for general milling tasks; material suitability depends on the chosen cutting parameters and tool body, and the grade performs well in applications where a sharp cutting edge and process security are required. How many indexable edges are available per insert? The pentagonal form provides five usable cutting edges, which helps to lower tooling costs per edge and extends effective tool life when the insert is rotated according to serviceable edges. What does the countersunk hole offer compared with plain-hole inserts? The cylindrical hole with a double-sided countersink (40°–60°) ensures secure clamping and consistent seat alignment in compatible tool bodies, reducing the risk of insert movement under heavy cutting forces and enhancing repeatability. Is this insert compatible with all Tungaloy milling bodies? Compatibility requires technical matching of the insert seat, geometry and milling body; the PNMU0905GN AH3225 is intended for Tungaloy milling systems and must be used in bodies designed for the 0905GN form and pentagonal geometry. What are the main benefits of the AH3225 grade? The AH3225 grade combines a PVD-coated surface with a balanced substrate to resist abrasive wear and edge chipping, delivering longer service life, improved process security and consistent surface quality in a variety of milling operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNMU 0905GN AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide performance, robust 108° geometry, and reliable chip control for steady milling cycles and consistent surface quality. Order the insert directly via Metav Werkzeuge or request technical advice from the consultants for seamless integration into existing Tungaloy milling systems. PNMU 0905GN AH8015 indexable insert for milling — Tungaloy, pentagonal, 108° PNMU0905GN AH8015 is an indexable insert designed for a wide range of milling operations within Tungaloy milling systems, providing a balance of wear resistance and cutting-edge stability for heat-resistant alloys. PVD-coated carbide grade AH8015 Pentagonal insert, size 09 108° approach geometry for robust cutting Cylindrical hole with double countersink 40°–60° Double-sided chipbreaker for consistent chips Proven wear resistance for heat-resistant alloys The AH8015 PVD-coated carbide grade was developed as a first-choice solution for machining heat-resistant alloys, offering a carefully balanced combination of wear resistance and cutting-edge stability. This balance reduces unexpected tool changes and maintains productive cycle times in demanding environments. The PVD coating enhances thermal protection and adhesion resistance at elevated cutting temperatures, which helps to preserve the cutting edge during prolonged operations. Accurate geometry and secure clamping for process safety The pentagonal insert form and 108° geometry provide a stable cutting orientation that improves engagement with the workpiece and reduces vibration. The insert thickness of 5.56 mm and the presence of a cylindrical central hole with a double countersink (40°–60°) ensure secure seating and repeatable clamping. It is essential that the insert seat, geometry and the milling body are technically matched for optimum performance; the system is composed of a milling body, indexable insert, clamp screw and, where applicable, a shim. Optimised chip control to maintain surface finish A double-sided chipbreaker on the insert facilitates controlled chip formation and evacuation across a range of feeds and depths of cut. By shaping chips into shorter, more manageable segments, the insert helps to protect the tool edge and the workpiece surface, improving finish quality and reducing downtime caused by chip-related issues. The chipbreaker design is particularly beneficial when switching between face, shoulder and slot milling. Versatility across common milling tasks The insert is suitable for face milling, shoulder milling, slotting, high-feed and profile milling applications, depending on the chosen tool family. This versatility makes the component a practical choice for job shops and production environments that require a single insert solution across multiple operations. The combination of geometry and grade AH8015 delivers consistent results when machining a broad spectrum of alloys. Integration and handling advice for reliable results When fitting the insert, confirm compatibility with the designated Tungaloy milling body and ensure clamp torque and seating surfaces are clean and undamaged. Correct seating and a matched milling body help to exploit the insert’s 108° geometry and maintain repeatable cutting performance. For specialised applications involving unusual alloys or extreme feeds, a short trial cut is recommended to determine the optimal cutting data for the specific setup. Request a technical consultation or a tailored quote from Metav Werkzeuge to specify the PNMU0905GN AH8015 for the intended milling application — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and cutting data. Technical data Article number: 6765858 SKU: 6765858-Tungaloy Manufacturer SKU: TUN6765858 Model series: Fräswendeschneidplatten Facts Insert designation: PNMU0905GN Insert size: 09 Thickness: 5.56 mm Angle: 108° Rake/free angle: 0° Hole: with hole Countersink: 40°–60° Special features Grade/coating: AH8015 (PVD-coated carbide) Insert shape: pentagonal Chipbreaker: double-sided Typical use: face, shoulder, slot, high-feed and profile milling System components: milling body, indexable insert, clamp screw, shim (where applicable) FAQ What materials is this insert suitable for? The AH8015 grade of the PNMU0905GN insert is optimised for heat-resistant alloys and offers balanced wear resistance and edge stability for a broad range of difficult-to-machine materials. Is the insert compatible with all Tungaloy milling bodies? Compatibility requires that the insert seat, geometry and milling body match technically; the PNMU0905GN is intended for use in Tungaloy milling systems where the seat and clamping method correspond to the insert design. How does the double-sided chipbreaker benefit milling operations? The double-sided chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip entanglement across varying cutting conditions. What is the purpose of the double countersink (40°–60°)? The double countersink provides secure and repeatable seating when clamped, enhancing stability and torque transmission between insert and milling body during heavy or interrupted cuts. Are replacement shims and clamp screws required? The system typically comprises the milling body, insert, clamp screw and, where applicable, a shim; replacement components should match the original specifications to maintain correct seating and clamping performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNMU 0905GN NS740 Wendeplatten - Tungaloy
Benefit from consistent surface finish, controlled wear and straightforward system compatibility in Tungaloy milling systems; these characteristics combine to reduce rework and support stable, repeatable production. Order the PNMU0905GN NS740 insert directly via Metav Werkzeuge or consult the specialists for selection guidance. PNMU 0905GN NS740 PNMU indexable milling insert – milling application, pentagonal, with hole (Tungaloy) PNMU0905GN NS740 is an indexable insert designed for milling applications, optimised for finishing to light machining of steel where surface quality and dimensional consistency are priorities. High-grade NS740 cermet for fine finishes Pentagonal form for five usable cutting edges Cylindrical hole with double countersink 40°–60° 0° relief for stable axial positioning Compatible with Tungaloy milling systems Precise surface quality and predictable wear The cermet grade NS740 is formulated for finishing to light machining of steel, prioritising surface integrity and dimensional control. The material chemistry and coating combination deliver a fine contact edge that reduces burr formation and helps maintain tolerance windows over longer tool life. In production contexts where repeatable part quality is required, this insert offers a balance between surface finish and predictable wear rates, lowering the need for frequent rework and inspection. Geometry engineered for productivity and edge economy A pentagonal plate shape provides five indexing positions, extending usable life before replacement. The pentagon form, combined with a double-sided chipbreaker, supports controlled chip flow and contributes to consistent cutting forces during planar, shoulder and contour milling. The insert’s profile and the specified 108° included angle assist in load distribution across the cutting edge, which helps maintain edge integrity when switching between finishing and light roughing operations. Secure clamping and system compatibility The insert is supplied with a cylindrical hole and a double-sided countersink (40°–60°) to ensure positive axial and radial location in the cutter body. A 0° relief specification means the plate locates flat against the seat, providing repeatable positioning and stable clamping with the appropriate clamping screw and, if required, support shim. Note that plate seat, geometry and cutter body must match; correct mating of components is essential for safe, repeatable performance in Tungaloy milling systems. Application guidance and machinability Designed primarily for milling, typical uses include planing, shoulder work, slotting, high-feed and contouring dependent on the assigned tool family. The grade suits fine finishing and light material removal on steel where surface quality and dimensional accuracy are the focus. When integrating into a toolset, consider feed and depth parameters consistent with finishing operations to capitalise on the cermet’s tendency for excellent edge stability and low built-up edge risk. For technical advice or to request the PNMU0905GN NS740 Tungaloy indexable insert, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss application-specific selection and availability Technical data Article number: 6743408 Manufacturer SKU: TUN6743408 Label: PNMU0905GN NS740 Tungaloy-Wendeplatte Model series: Fräswendeschneidplatten Manufacturer: Tungaloy Facts Size: 09 Plate thickness: 5.56 mm Included angle: 108° Relief angle: 0° Shape: pentagonal Special features Grade/sort: NS740 (cermet / coated cermet) Hole: with hole Hole style: cylindrical hole + double-sided countersink (40°–60°) Chipbreaker: double-sided Application: milling (plan, shoulder, slot, high-feed, contour) FAQ What materials is this insert intended for? The PNMU0905GN NS740 is specified for finishing to light machining of steel, with the NS740 cermet grade optimised for surface quality and even wear. How many cutting edges are available per insert? The pentagonal form provides five indexing positions; each index restores a fresh cutting edge for continued use. What are the key geometric features that aid clamping stability? The combination of a cylindrical hole with a double-sided countersink (40°–60°) and a 0° relief ensures secure axial and radial location in compatible Tungaloy cutter bodies. Can this insert be used for roughing operations? The insert is designed primarily for finishing and light machining; it may be used in lighter roughing within the limits of its grade and geometry, but heavy stock removal is not the intended application. Which tool systems must the insert be fitted to? The insert is intended for use in Tungaloy milling systems where the plate seat, geometry and cutter body are technically matched to the insert specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNMU 0905GN T1215 Wendeplatten - Tungaloy
Take advantage of the proven combination of productive machining, stable edge retention and broad material versatility to keep cycle times short and tool changes predictable. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult the Metav specialists for application matching and cutter-seat verification. PNMU 0905GN T1215 indexable insert for milling — Tungaloy PNMU 0905GN T1215 is an indexable insert for Tungaloy milling systems, designed for face, shoulder, slot, high-feed and contour milling when matched to the corresponding cutter body. PNMU 0905GN T1215 grade for milling Pentagonal shape, 5.56 mm thickness Central hole; cylindrical bore with 40°–60° countersink Double-sided chipbreaker for versatile cutting Reliable carbide grade for high-productivity milling The PNMU 0905GN T1215 indexable insert is produced in a cemented carbide that balances wear resistance and toughness. The T1215 grade extends tool life in mixed cutting conditions by resisting abrasive wear while maintaining a stable cutting edge, which reduces downtime for insert changes. In practical terms, this translates into more consistent component tolerances and fewer unscheduled interruptions in production, particularly when machining general engineering materials. Secure seating and geometry that ensures repeatable performance A pentagonal plate form with a central hole and a cylindrical bore plus double-sided countersink (40°–60°) provides positive location and a repeatable clamping interface. The 108° cutting-edge geometry and 0° clearance angle promote stable engagement in face and shoulder milling operations, while the 5.56 mm plate thickness adds rigidity under moderate to heavy cutting loads. These design elements together help to ensure predictable runout behaviour and reliable insert indexing during multi-edge use. Optimised chip control for versatile production tasks The double-sided chipbreaker enables controlled chip formation across a range of axial depths and feed rates, helping to avoid recutting and to maintain surface quality. When paired with an appropriate cutter body and clamping screw, the insert supports high-feed and contouring strategies with reduced risk of built-up edge. The result is fewer scrap parts and a smoother finishing pass, which supports tighter delivery schedules and improved part appearance. Application scope and material compatibility for shop-floor planning Intended specifically for milling, the insert suits typical operations such as face, shoulder, slot and contour milling depending on the matched tool family. The combination of the Tungaloy grade and insert geometry offers broad applicability across common workshop materials and supports standard process windows for general-purpose production. System compatibility (insert seat, geometry and cutter body) must be confirmed to ensure correct fit and clamping before use. Contact Metav Werkzeuge for tailored advice on cutter compatibility and to secure genuine Tungaloy PNMU 0905GN T1215 inserts for reliable, high-productivity milling Technical Data Article number: 6747246 SKU: 6747246-Tungaloy Manufacturer article number: TUN6747246 Data Plate thickness: 5.56 mm Inscribed circle size: 09 Cutting edge angle: 108° Clearance angle: 0° Special features Material: cemented carbide Grade: T1215 Shape: pentagonal Hole: cylindrical with double-sided countersink (40°–60°) Chipbreaker: double-sided Application: milling FAQ What operations is this insert suitable for? The PNMU 0905GN T1215 indexable insert is intended for face, shoulder, slot, high-feed and contour milling when used in the matching Tungaloy cutter body. Which material is the insert made from? The insert is made of cemented carbide in the Tungaloy T1215 grade, selected to balance wear resistance and edge stability for general milling tasks. How is the insert clamped in the cutter body? The pentagonal insert features a central hole with a cylindrical bore and a double-sided countersink (40°–60°) to ensure correct seating and repeatable clamping with the appropriate screw and seat geometry. Can the insert be used on high-feed machining? Yes, the combination of the insert's geometry, thickness (5.56 mm) and the double-sided chipbreaker supports high-feed strategies within the recommended cutter and process parameters. What must be checked before fitting the insert? Verify that the insert seat, geometry and cutter body are technically compatible; the insert and cutter must match to ensure secure clamping and correct cutting angles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
PNMU 0905GN T3225 Wendeplatten - Tungaloy
Take advantage of the durable cutting performance and predictable wear of a Tungaloy grade specifically tuned for milling: the combination of T3225 wear resistance, a pentagonal format and a secure clamping design delivers consistent productivity and reduced changeover time. Order directly via Metav Werkzeuge or request technical advice from our consultants if clarification is required. PNMU 0905GN T3225 milling insert for milling – pentagonal, 108° cutting geometry PNMU0905GN T3225 is a pentagonal indexable insert designed for a range of milling operations within compatible Tungaloy milling systems, where seat, geometry and cutter body must be technically matched Pentagonal 5-sided indexable geometry Tungaloy grade T3225 for wear resistance 108° cutting angle for versatile milling Cylindrical hole with double-sided countersink Predictable performance through grade and substrate The combination of the T3225 cutting grade and a carbide substrate prioritises predictable tool life and stable edge retention under interrupted and continuous milling conditions. The chosen formulation balances wear resistance and toughness to reduce unexpected edge failure and limit unplanned rework. For production environments the net effect is increased process stability, fewer insert changes and a clearer cost-per-cut calculation. Technical buyers will appreciate that the specification targets reduced total machining costs by extending the usable life of each insert while maintaining consistent dimensional results. Reliable clamping and secure cutting for repeatable results A stable seating and clamping arrangement is essential for reproducible milling results. This insert features a cylindrical hole with a double-sided countersink (40°–60°) to ensure positive location in suitable cutter bodies; the pentagonal format and 5.56 mm thickness contribute to rigidity at the cutting edge. The double-sided chipbreaker supports controlled chip formation, reducing heat build-up and improving surface finish. The 108° main cutting angle provides a good compromise between strength and cutting engagement for face, shoulder and contour milling, helping to maintain tool life and component quality. Versatility across milling tasks with clear compatibility notes Designed for a broad set of operations — including face, shoulder, slot, high-feed and contour milling depending on the assigned tool family — this insert delivers versatility when the insert geometry and cutter body are matched. The pentagonal layout offers multiple indexed edges, which reduces downtime through quick, repeatable index changes and improves overall productivity. Always verify that the cutter body, clamping screw and insert seat are compatible; mismatches can compromise locating accuracy and nullify the material advantages built into the insert. Specification guidance and application support Clear technical data supports selection: the pentagonal shape, 108° geometry, T3225 grade and the hole/countersink design are intended to serve a wide material range while focusing on process reliability. Metav Werkzeuge can supply additional parameters such as recommended cutting speeds, feeds and depth of cut for particular materials and machines. If the application requires machining of specific alloys or unconventional feeds, technical consultation is available to align insert geometry and operational parameters with productivity goals. For reliable, production-grade milling performance with Tungaloy inserts, contact Metav Werkzeuge for availability and tailored technical recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6762077 Manufacturer SKU: TUN6762077 SKU: 6762077-Tungaloy Model series: Fräswendeschneidplatten Core technical figures ISO designation: PNMU0905GN Grade: T3225 Plate size: 09 Plate thickness: 5.56 mm Cutting angle: 108° Clearance angle: 0° Special features and compatibility Material: carbide Plate shape: pentagonal Hole style: cylindrical hole with double-sided countersink (40°–60°) Chipbreaker: double-sided Application: milling System note: Designed for Tungaloy milling systems; seat and geometry must match the cutter body FAQ What materials is this insert suitable for? The PNMU0905GN T3225 insert (Tungaloy, SKU 6762077-Tungaloy) is formulated for general milling tasks and offers a balanced combination of wear resistance and toughness suitable across common steels and castings when used with the appropriate cutter body. How does the pentagonal shape benefit production workflows? A pentagonal insert like the PNMU0905GN T3225 provides five usable cutting edges, which reduces changeover frequency; the insert’s geometry and thickness support rigidity for repeatable milling operations. Is the PNMU0905GN compatible with other manufacturers’ cutter bodies? Compatibility depends on seat geometry and clamping design; the PNMU0905GN T3225 requires a matched seat and clamp arrangement — verify dimensional and hole/countersink compatibility before use. What does the double-sided chipbreaker do in practice? The double-sided chipbreaker on the PNMU0905GN T3225 helps control chip formation on both cutting orientations, improving surface finish and reducing heat concentration at the cutting edge during interrupted cuts. Where can detailed cutting data for the PNMU0905GN be obtained? Cutting parameters and application guidance for the PNMU0905GN T3225 insert are available from Metav Werkzeuge or the Tungaloy technical literature; consultation is recommended to match speeds and feeds to the specific machine and workpiece material. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCGT 0602M0 KS05F Wendeplatten - Tungaloy
Take advantage of the combination of KS05F grade durability, precise ISO geometry and reliable chip control for a steady turning process; order the insert directly via Metav Werkzeuge or consult the team for application advice. RCGT 0602M0 KS05F — ISO turning indexable insert by Tungaloy, round 06, AL chipbreaker The RCGT0602M0-AL KS05F is an ISO turning indexable insert designed for external and internal turning applications, combining a Tungaloy carbide grade with an AL chipbreaker for controlled chip formation. ISO round insert, size 06 KS05F Tungaloy carbide grade AL chipbreaker optimised for aluminium 7° relief with hole and countersink Maximise machining efficiency with a balanced cutting grade The Tungaloy KS05F grade is formulated to offer a well-balanced combination of wear resistance and toughness, making the insert suitable for continuous and semi-finishing turning. As an ISO-compliant cutting body, the indexable insert provides predictable wear behaviour that supports longer tool life and reduced downtime. By selecting a grade that complements the insert geometry, operators benefit from consistent cutting forces and improved productivity; the resulting economy of operation is a direct gain for production schedules and cost control. Secure clamping and repeatable accuracy for dependable results Designed as a round RCGT insert with a 2.38 mm plate thickness and a 7° relief angle, the geometry supports stable seating and accurate positioning in contemporary holders. The insert features a cylindrical hole with a one-sided countersink (40°–60°) which enables reliable fixation and repeatable concentricity. These dimensional characteristics contribute to reduced run-out and better surface finish in both external and internal turning. Compatibility depends on holder form, tolerance class and fastening method, so correct matching ensures the mechanical advantages are realised on the shop floor. Tailored chip control and system compatibility for turning tasks The integrated AL chipbreaker is optimised for machining aluminium and similarly ductile materials, promoting short, controllable chips and easing evacuation from the cut. In combination with the KS05F grade and the round insert form, this insert is suited to a range of turning operations when matched with the appropriate holder and clamping set. The complete system typically comprises the indexable insert, an external holder or boring bar, a shim/clamping set and spare screws; treating the setup as a system ensures process stability and consistent component quality. Contact Metav Werkzeuge for tailored application advice and availability of the Tungaloy RCGT0602M0-AL KS05F insert; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6822301 Manufacturer SKU: TUN6822301 Brand: Tungaloy Model series: ISO turning indexable inserts Application: Turning ISO designation: RCGT0602M0-AL Core specifications Size: 06 Plate thickness: 2.38 mm Relief angle: 7° Corner radius: 0 Countersink angle: 40°–60° Design & features Material: Cemented carbide Grade: KS05F (Tungaloy) Chipbreaker: AL Plate form: Round Hole: cylindrical hole + one-sided countersink System compatibility: insert, holder, shim/clamping set, spare screws FAQ What materials is the insert suitable for? The RCGT0602M0-AL KS05F insert is intended for turning and, with its AL chipbreaker, is optimised for aluminium and comparable ductile materials; the KS05F grade balances wear resistance and toughness for general turning tasks. How is the insert fixed in the holder? Fixing is by the cylindrical hole with a one-sided countersink (40°–60°); correct seating and clamping in a compatible ISO holder ensure concentricity and repeatable positioning for the Tungaloy indexable insert. What are the key dimensions to check when selecting a holder? Key numerical data are: plate thickness 2.38 mm, size 06, relief angle 7° and corner radius 0; confirm these values against the holder's tolerance class and fastening method for a reliable fit. Is this an indexable or a solid tool? This is an ISO indexable turning insert (wendeplatte) intended for use with appropriate external holders or boring bars rather than as a solid single-piece tool. Which holder types are compatible with this ISO designation? Compatibility depends on holder form, relief, tolerance class, fastening, size and thickness; choose a holder specified for RCGT-style round inserts to match the RCGT0602M0-AL KS05F geometry and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCGT 0803M0 KS05F Wendeplatten - Tungaloy
Benefit from the combination of Tungaloy's KS05F carbide grade and the precise 7° clearance geometry for consistent cutting performance and stable edge life. Order the insert directly via Metav Werkzeuge or consult our advisors for help selecting the correct holder and clamping set. RCGT 0803M0 KS05F ISO turning indexable insert for turning – Tungaloy The RCGT0803M0-AL KS05F is an ISO-format, round turning indexable insert designed for external and internal turning in production and job-shop environments. ISO RCGT 0803M0 format Tungaloy KS05F grade for wear resistance 7° clearance angle for stable cutting 3.18 mm plate thickness, round shape Consistent edge life from a tailored carbide grade The insert uses the KS05F Tungaloy carbide grade to balance wear resistance and edge stability, which reduces unexpected tool changes and supports predictable cycle times. Manufactured in cemented carbide, the grade is selected to complement the insert geometry and chipbreaker, delivering a compromise between toughness and hardness that suits a range of turning tasks. The result is a component that contributes to uninterrupted production and lower process variability. Precision geometry that improves chip control and finish A 7° clearance angle and the supplied AL chipbreaker work together to promote controlled chip formation and reliable surface quality during both external and internal turning. The insert's round form and corner radius 0 enable flexibility in approach angles and facilitate tight-ranging operations where profile fidelity matters. Choosing the appropriate chipbreaker and grade for the workpiece material and machining stability is essential; the geometry of this ISO insert simplifies tooling choices while allowing fine tuning for finish and cycle time optimisation. System compatibility that simplifies setup and turnover Mounting is straightforward thanks to the cylindrical hole with a one-sided countersink (40°–60°) and the standard ISO format; compatibility with the toolholder depends on form, clearance angle, tolerance class, clamping method, size and thickness. With a plate thickness of 3.18 mm and size 08, the insert fits conventional external turning holders and boring bars, and the typical system comprises the ISO insert, an appropriate external holder or boring bar, a shim/clamp set and replacement screws. This modular approach reduces downtime, enables quick index changes and supports consistent run-to-run performance on the shop floor. For assured process stability with the Tungaloy KS05F grade, contact Metav Werkzeuge to secure suitable holders and clamping sets or request personalised technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6822302 Manufacturer SKU: TUN6822302 SKU: 6822302-Tungaloy Model series: ISO turning indexable inserts Designation: RCGT0803M0-AL KS05F Tungaloy insert Facts Thickness: 3.18 mm Clearance angle: 7° Size: 08 Corner radius: 0 mm Hole: cylindrical hole with one-sided countersink (40°–60°) Plate form: round Special features Carbide grade: KS05F (Tungaloy) Chipbreaker: AL Material: cemented carbide Intended application: turning (external and internal) ISO format: RCGT 0803M0 System components: compatible with external holders, boring bars, shims/clamp sets and screws FAQ What workpiece operations is this insert designed for? This indexable insert is intended for both external and internal turning operations; the RCGT0803M0-AL KS05F Tungaloy insert provides a geometry and grade suited to general turning tasks in production and job-shop settings. How is the insert mounted and secured? The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping; proper mounting requires a matching holder, a shim or clamp set and the correct replacement screws compatible with the RCGT0803M0 format. Which materials can be machined with this grade? The KS05F carbide grade is engineered to balance wear resistance and edge stability; the specific suitability depends on the workpiece material and chosen chipbreaker, so the grade should be matched to the machining task for optimal performance. What does the AL chipbreaker indicate? The AL chipbreaker is supplied as part of the insert designation; chipbreaker selection influences chip formation and surface finish and should be chosen according to the workpiece material, cutting parameters and machine stability. How should the holder be selected for this ISO insert? Compatibility is governed by insert form, 7° clearance angle, tolerance class, clamping method, size (08) and thickness (3.18 mm); choose a holder or boring bar engineered for RCGT 0803M0 inserts and the intended turning application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com