RCMM 1606M0 TH10 Wendeplatten - Tungaloy
Take advantage of the low cutting forces of the TH10 uncoated carbide and the ISO‑compliant RCMM 1606M0 geometry with secure clamping via its cylindrical hole for uninterrupted turning operations; order the RCMM1606M0-61 insert directly via Metav Werkzeuge or ask our consultants if needed RCMM 1606M0 TH10 RCMM1606M0-61 Tungaloy indexable turning insert — uncoated carbide, round, 7° clearance The RCMM1606M0-61 TH10 is an ISO‑compatible indexable turning insert designed for precision turning, offering low cutting forces and clean surface results in non‑ferrous material machining ISO 1606M0 geometry for standard holders Uncoated carbide TH10 for low cutting forces Round insert with cylindrical hole for secure clamping 7° clearance angle for reliable chip flow Low cutting forces and cleaner surfaces for non‑ferrous turning The RCMM1606M0-61 is built from uncoated carbide in the TH10 grade to deliver reduced cutting forces and improved superficial quality when machining non‑ferrous materials. The sharp, uncoated cutting edge supports gentle engagement with the workpiece, which helps to avoid material smearing and promotes an even finish. Combined with the chipbreaker 61, this geometry encourages consistent chip formation and evacuation, reducing the risk of built‑up edge and minimising machine downtime. For operations that prioritise surface integrity and low power draw, this insert offers a practical balance of performance and economy. ISO compliance and secure clamping for predictable tool life The insert follows the ISO 1606M0 geometry, making it compatible with holders designed for that form class; compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness. The round plate form with cylindrical hole ensures secure mechanical clamping and repeatable positioning in the seat, which supports stable cutting conditions and predictable tool life. With a 6.35 mm plate thickness and a nominal size of 16 mm, the component provides robust stiffness for routine turning tasks while keeping the overall tool assembly compact and accessible for quick changes. Optimised chip control and application scope The dedicated chipbreaker 61 assists in producing short, controllable chips in many non‑ferrous alloys, improving surface finish and easing chip handling at moderate to high feed rates. This insert is suitable for both external and internal turning where a low cutting force and clean chip formation are required. The modest 7° clearance angle supports free cutting without excessive flank contact, which helps maintain dimensional accuracy during finishing passes. Where the objective is smooth, efficient material removal with minimal secondary operations, this grade and geometry provide a targeted solution. Practical selection and workshop integration Selection of this insert should be based on the combination of material, machining stability and holder compatibility; the uncoated TH10 grade is particularly effective where low cutting forces and a sharp edge are advantageous. The insert is intended for use within an ISO‑standard system that includes a matching external holder or boring bar, a support pad or clamping kit, and replacement screws as required. For workshops seeking straightforward, repeatable performance with minimal setup overhead, the Tungaloy insert offers a clear option that aligns with established fixture designs and maintenance workflows. For reliable, low‑force turning with Tungaloy's TH10 grade, contact Metav Werkzeuge for technical advice or to request purchasing information — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6805853 Manufacturer SKU: TUN6805853 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Application: Turning Numeric data Size: 16 mm Thickness: 6.35 mm Clearance angle: 7° Corner radius: 0 Design & features Uncoated carbide (TH10) Chipbreaker: 61 Round plate form With cylindrical hole ISO designation: RCMM1606M0-61 Compatibility depends on holder form, clearance, tolerance, fastening, size and thickness FAQ Which materials is this insert best suited to? The TH10 grade in this RCMM1606M0-61 insert is optimised for non‑ferrous materials and applications where a sharp, uncoated edge supports low cutting forces and clean surfaces. Will this geometry fit standard ISO holders? Yes; the RCMM 1606M0 geometry conforms to ISO form standards, so compatibility with a holder is determined by form, clearance angle, tolerance class, fastening, size and thickness. Is the cutting edge coated? No — the RCMM1606M0-61 is an uncoated carbide insert (TH10), chosen for its sharp edge and low cutting resistance rather than a surface coating. For which turning operations is this insert intended? The insert is suitable for external and internal turning where controlled chip formation and smooth finishes are required, especially on non‑ferrous alloys. How does the chipbreaker 61 improve machining? Chipbreaker 61 promotes short, consistent chips and better evacuation, which aids surface quality and reduces the likelihood of entanglement during continuous turning with this Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
RCMM 2006M0 T9225 Wendeplatten - Tungaloy
Combine CVD-coated carbide durability with ISO compatibility for stable, productive medium-to-heavy turning; benefit from the robust T9225 grade and standardised RCMM format — order the RCMM2006M0-61 T9225 insert directly via Metav Werkzeuge or consult their specialists for application advice. RCMM 2006M0 T9225 — RCMM2006M0-61 indexable insert for turning, Tungaloy The RCMM2006M0-61 T9225 is a round ISO indexable insert intended for turning, optimised for medium to heavy steel machining with a 7° relief angle and cylindrical-hole clamping. ISO indexable insert RCMM 2006M0 format CVD-coated carbide grade T9225 for steel machining Round 20 mm plate, 6.35 mm thickness Cylindrical-hole design for secure clamping Stable cutting for demanding turning operations The RCMM2006M0-61 delivers consistent performance in interrupted and continuous cuts thanks to its CVD-coated carbide construction and the T9225 grade tuned for medium to heavy steel machining. The coating increases wear resistance while the substrate provides toughness where variable engagement and slightly interrupted cuts occur. As a result, cycle times are stabilised and insert life is extended compared with uncoated grades, supporting predictable production runs and reduced tool change frequency. Compatibility with ISO holders ensures repeatable clamping and straightforward stock control in mixed-tool environments. Simple integration into standard turning systems Designed as part of a system, the insert works together with matching external holders or boring bars, a shim/clamping set and replacement screws to form a reliable tooling solution. Key dimensional data such as the 20 mm plate diameter and 6.35 mm plate thickness, together with the 7° relief angle and cylindrical hole, determine the correct holder match. These parameters are decisive for safe clamping and cutting geometry; therefore, selection should account for holder form, tolerance class and fastening method to maintain tool stability and surface finish consistency. Chip control and application guidance for improved efficiency The integrated chipbreaker (designation 61) and the round geometry support effective chip formation and evacuation in a range of steel turning tasks. The combination of chipformer and the robust universal T9225 grade makes this insert suitable where alternating cutting conditions demand a balance of wear resistance and toughness. For parts requiring dimensional stability and repeatable surface quality, this insert reduces the need for frequent rework. When process parameters are adapted to material and machine rigidity, tool life and productivity show measurable improvement. Practical notes on grade selection and handling The T9225 grade is intended as a universal solution for varying engagement and heavier cuts; it is not optimised for non-ferrous materials or very high-speed finishing operations. Where extreme surface finish or aluminium machining is required, select a dedicated grade for that material class. Inserts should be mounted with the specified clamping elements; check holder compatibility by comparing form, relief angle, size and thickness to the insert specification. Proper mounting torque and a clean seating surface will maximise performance and minimise the risk of insert movement under load. Contact Metav Werkzeuge to request application advice or availability for the RCMM2006M0-61 T9225 insert; technical enquiries can be emailed to info@metav-werkzeuge.com or phoned to +49 2822 7131930 Technical data Article number: 6781136 Manufacturer SKU: TUN6781136 SKU: 6781136-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: RCMM2006M0-61 T9225 Tungaloy insert Core dimensions Plate diameter: 20 mm Plate thickness: 6.35 mm Relief angle: 7° Corner radius: 0 Chipbreaker designation: 61 Design & special features Material: carbide Coating: CVD-coated Grade: T9225 — robust universal grade for medium–heavy steel machining Plate shape: round Hole style: cylindrical hole (with hole) Application: turning (external and internal) System components: insert, matching external holder/boring bar, shim/clamping set, spare screws Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The RCMM2006M0-61 T9225 insert is optimised for steel machining in medium to heavy turning applications; the T9225 grade balances wear resistance and toughness for variable engagement. How is the insert secured in the holder? This round insert features a cylindrical hole for secure clamping; correct holder selection and clean seating surfaces ensure reliable clamping and repeatable cutting geometry. What are the key dimensions to check for holder compatibility? Verify the 20 mm plate diameter, 6.35 mm thickness, 7° relief angle and the ISO format 2006M0 to ensure the holder matches the insert form and tolerance class. Is the chipbreaker suitable for interrupted cuts? Yes, the chipbreaker 61 in combination with the T9225 grade supports interrupted and slightly variable cuts typical of medium to heavy turning tasks. Which SKU or article number should be quoted when ordering? Refer to article number 6781136 or SKU 6781136-Tungaloy to identify the RCMM2006M0-61 T9225 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 2006M0 TH10 Wendeplatten - Tungaloy
Take advantage of the sharp TH10 grade, ISO‑compliant geometry and robust carbide construction for consistent, low‑force turning of non‑ferrous components; order directly via Metav Werkzeuge or consult our specialists for application support. RCMM2006M0-61 TH10 — RCMM 2006M0 turning insert by Tungaloy RCMM2006M0-61 TH10 is a round, ISO‑standard turning insert designed for clean, low‑force machining in non‑ferrous applications and general turning operations. ISO geometry for secure holder fit Sharp TH10 grade for low cutting forces Cylindrical hole for reliable clamping 6.35 mm thickness for process stability Improved part finish with reduced cutting forces The uncoated TH10 grade is an uncoated carbide formulation engineered to provide low cutting forces and a clean surface when machining non‑ferrous metals and soft alloys. In practice this means fewer burring issues and reduced rework after turning operations. The insert’s cutting edge geometry and sharp grade support stable chip formation, which contributes directly to higher first‑pass yield and more predictable cycle times for routine and precision turning. Precise fit and secure clamping for consistent machining Built to the ISO specification 2006M0, the round insert features a cylindrical hole and a nominal 6.35 mm plate thickness that together ensure a repeatable fit in compatible holders. The standardised form and relief angle of 7° make it straightforward to match the insert to an appropriate external holder or boring bar, providing dimensional stability and vibration resistance. This combination of ISO geometry and secure clamping reduces the need for frequent adjustments and helps maintain surface quality across longer production runs. Practical benefits for workshop productivity With a chipbreaker 61 suited to the intended materials, the insert supports reliable chip control and easier swarf evacuation during external and internal turning. The round form and zero corner radius enable flexible stock removal and contouring tasks while keeping setup changes minimal. For shops prioritising consistency over time, this insert delivers a balance of sharp cutting performance and predictable tool life, making it a practical choice for everyday turning tasks where low cutting force and clean finishes are required. For reliable turning results with the Tungaloy RCMM2006M0-61 TH10 insert, contact Metav Werkzeuge for application advice and supply — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations. Technical data Manufacturer's article number: 6805855 SKU: 6805855-Tungaloy Manufacturer SKU: TUN6805855 Model series: ISO‑Drehwendeschneidplatten Material: carbide Facts ISO code: 2006M0 Size: 20 mm Thickness: 6.35 mm Relief angle: 7° Corner radius: 0 mm Special features Grade: TH10 (uncoated) Chipbreaker: 61 Plate shape: round Hole: with cylindrical hole Application: turning FAQ What materials is this insert intended for? The RCMM2006M0-61 TH10 Tungaloy turning insert is designed primarily for non‑ferrous materials and soft alloys where an uncoated, sharp carbide grade supports low cutting forces and clean surfaces. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening and size; the RCMM2006M0-61 TH10 insert fits holders designed for 2006M0 ISO geometry with a round insert and a cylindrical hole. How does the TH10 grade affect machining performance? The uncoated TH10 grade on the RCMM2006M0-61 Tungaloy insert provides a sharp cutting edge that reduces cutting forces and improves surface finish when turning non‑ferrous components. Is this insert suitable for both external and internal turning? Yes; the round shape and zero corner radius of the RCMM2006M0-61 insert make it suitable for both external and internal turning operations, with chipbreaker 61 aiding chip control. What should be checked when selecting this insert for production? Confirm holder compatibility with the 2006M0 ISO specification, verify the required relief angle and clamping method, and choose the TH10 grade for applications prioritising low cutting forces and clean finishes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 2507M0 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust T9225 CVD-coated carbide, precise ISO compatibility and a round 25 mm form for reliable medium-to-heavy steel turning; order directly via Metav Werkzeuge or contact our consultants for application advice. RCMM 2507M0 T9225 — Tungaloy indexable insert for turning (round, 25 mm, 7° relief) A RCMM 2507M0 T9225 indexable insert engineered for external and internal turning in medium to heavy steel machining, with a CVD-coated carbide grade optimised for changing engagement and slightly interrupted cuts. CVD-coated carbide for improved wear resistance Universal T9225 grade for medium–heavy steel Round 25 mm plate with cylindrical hole 7° relief angle for stable chip formation Greater cutting performance with a universal hardmetal grade The CVD-coated carbide composition of this insert delivers a balanced combination of wear resistance and toughness. The T9225 grade is formulated as a robust universal solution for medium to heavy steel turning where varying engagement or light interruptions occur; this means fewer premature tool changes and a steadier production pace. The coating reduces flank and crater wear under elevated temperatures, which supports longer tool life and more consistent part quality when compared with uncoated grades. These technical choices translate into measurable savings through extended edge life and reduced downtime during batch manufacturing. Designed for straightforward integration and secure clamping As an ISO-series turning insert, the geometry and tolerances follow established standards, so compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness. The round 25 mm plate with a cylindrical hole allows simple locating and secure clamping in many external holders and boring bars; the 7° relief ensures reliable clearance in common tool setups. The plate thickness of 7.94 mm contributes to rigidity, reducing chatter and improving surface finish in heavier cuts. By selecting the correct holder and clamp set, the insert becomes part of a stable system—insert, holder, shim/clamp and fastening screws—designed to keep set-up times low and repeatability high. Stability and chip control for mixed cutting conditions The integrated chipbreaker 61 combined with the universal grade focuses on controlled chip formation across a range of cutting parameters. In practice, this means better evacuation of swarf, reduced interference with the cutting edge and safer handling of semi-interrupted cuts. The zero corner radius (r = 0) provides a defined cutting edge suitable for finishing profiles or when small radii are required in the workpiece geometry. For production environments where cutting conditions vary from one workpiece to the next, the insert’s design reduces the number of specialised grades needed on the tool crib while maintaining consistent surface quality and process reliability. Practical system considerations and maintenance benefits Using this insert in a defined tooling system supports fast index changes and predictable maintenance cycles. The ISO-compatible format allows users to replace worn edges quickly without complex regrinding, and having spare screws, underplates and a dedicated holder reduces overall repair time. The combination of CVD coating and a tough substrate gives a favourable balance between wear resistance and resistance to mechanical shock, making it suitable where both continuous and mildly interrupted cuts occur. For workshops seeking to streamline tooling stocks, this insert reduces setup complexity and supports sustained productivity. Contact Metav Werkzeuge today for tailored advice on integrating Tungaloy RCMM 2507M0 T9225 inserts into the tooling setup; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781103 Manufacturer SKU: TUN6781103 Brand: Tungaloy Series: ISO turning inserts Material: carbide Facts Plate size (mm): 25 Plate thickness (mm): 7.94 Relief angle: 7° Corner radius (mm): 0 SKU: 6781103-Tungaloy Special features CVD-coated carbide Grade: T9225 (universal, medium–heavy steel) Round plate with cylindrical hole Chipbreaker: 61 ISO designation: 2507M0 System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert intended for? The RCMM 2507M0 T9225 insert is specified for medium to heavy steel machining and performs well under varying engagement and light interruptions. How is holder compatibility determined? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters to the holder ensures secure clamping and correct geometry. What does the chipbreaker 61 provide? Chipbreaker 61 is selected to promote controlled chip formation across common turning conditions, improving evacuation and protecting the cutting edge during semi-interrupted cuts. Is the insert coated and how does that help? Yes — the insert features a CVD coating on a carbide substrate, which increases wear resistance and supports stable cutting at higher temperatures, extending edge life. Can the insert be used for internal turning? Yes, the geometry and ISO form allow use in both external and internal turning when combined with the appropriate boring bar or internal holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM1003M0-61 1003M0 T9225 Wendeplatten - Tungaloy
Benefit from a robust CVD‑coated carbide grade and ISO‑compliant round geometry that deliver stable chip control and consistent tool life in medium to heavy steel turning; the compact 3.18 mm thickness and central cylindrical hole ensure secure clamping and repeatable positioning. Order the RCMM1003M0-61 T9225 directly via Metav Werkzeuge or ask our consultants if needed. RCMM 1003M0 T9225 Turning insert – ISO round 10 mm, 3.18 mm; Tungaloy RCMM 1003M0 T9225 is an ISO‑standard round indexable insert engineered for robust external and internal turning in steel, offering a balance of wear resistance and toughness for varying engagement conditions. CVD-coated carbide grade T9225 Robust universal grade for steel turning ISO round 10 mm, thickness 3.18 mm Cylindrical central hole with 7° relief angle Stable, repeatable cutting where toughness matters The combination of CVD‑coated carbide and the T9225 grade provides a pragmatic balance between wear resistance and fracture toughness, making the insert suitable for slightly interrupted cuts and variable engagement. This results in fewer unplanned tool changes and a more predictable production rhythm. For operations that alternate between steady and disturbed cuts, the engineered coating reduces flank wear while the substrate absorbs shocks, so process reliability and component quality are maintained without sacrificing edge life. Clear compatibility and secure mounting for repeatable results Built to ISO standard dimensions, the round 10 mm insert with 3.18 mm thickness and a cylindrical central hole permits straightforward seating in compatible holders. The specified 7° relief angle helps control cutting forces and prevents rubbing at the cutting edge; relief angle describes the clearance behind the cutting edge, affecting finish and tool life. Compatibility is determined by holder form, relief angle, tolerance class, clamping method, size and thickness, so correct selection of the matching outer holder or boring bar ensures stable clamping and consistent tool position from one index to the next. Material technology explained: why this grade suits steel machining The T9225 grade is a robust universal solution for medium to heavy steel machining where changing engagement or light interruptions call for enhanced toughness. The CVD coating adds a wear‑resistant surface layer that improves abrasion resistance and reduces adhesion at elevated temperatures; the carbide substrate beneath provides the necessary core strength. In practice this means improved chip control and steady performance over multiple indexings, which contributes to lower cost per part and reduced process variation on demanding turning tasks. Practical system and productivity advantages for shops As part of a complete turning system — ISO insert, suitable outer holder or boring bar, shim/clamping set and replacement screws — this round geometry supports both external and internal turning with straightforward indexability. The included chipbreaker 61 (as part of the designation) is intended to assist chip formation for typical steel applications; selecting the matching chipbreaker and grade for the workpiece enhances surface finish and tool life. When combined with optimised holder rigidity and stable clamping, the insert helps to increase machine uptime and contributes to predictable cycle times in serial production. If unsure which holder or parameters suit a given application, technical guidance is available. For tailored grade and holder selection of Tungaloy turning inserts and fast supply, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert, application‑oriented advice and prompt delivery. Technical data Article number: 6781083 Manufacturer SKU: TUN6781083 Our SKU: 6781083-Tungaloy Facts Insert designation: RCMM1003M0-61 Geometry size: 10 mm Thickness: 3.18 mm Relief angle: 7° Corner radius: 0 mm Hole style: cylindrical Special features Material: carbide Coating: CVD Grade: T9225 Application: turning (external and internal) System composition: ISO insert, outer holder or boring bar, shim/clamping set, replacement screws Compatibility: determined by holder form, relief angle, tolerance class, clamping, size and thickness FAQ Which materials is this insert intended for? The Tungaloy RCMM1003M0-61 T9225 insert is designed primarily for medium to heavy steel machining where robustness and good chip control are required. Will this insert fit my existing holder? Compatibility depends on holder geometry, relief angle, tolerance class, clamping and the insert size; the RCMM1003M0-61 designation indicates an ISO round 10 mm insert, so use holders specified for that format and check for matching clamping and tolerance. What advantages does the T9225 grade provide? The T9225 grade combines a CVD‑coated carbide surface with a tough substrate, improving wear resistance and resistance to fracture in interrupted or variable engagement conditions. What chipbreaker is used with this insert? The designation includes chipbreaker 61; the RCMM1003M0-61 Tungaloy insert features a chipbreaker tailored to common steel turning tasks for improved chip formation and evacuation. Can this insert be used for internal boring operations? Yes, the RCMM1003M0-61 is suitable for both external and internal turning when paired with the appropriate boring bar or internal holder designed for round ISO inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0502M0 NS9530 Wendeplatten - Tungaloy
Product information inconsistent: the material is listed as "Hartmetall" (carbide) while the cutting material is specified as "uncoated cermet"; please provide corrected data, as this discrepancy could lead to confusion for customers or users who rely on accurate and precise specifications to make informed decisions about the suitability of the product for their specific applications, particularly in industries where material properties such as hardness, durability, and resistance to wear are critical factors in determining performance and reliability, which means that ensuring clarity and consistency in the technical details provided is essential for maintaining trust and avoiding potential issues.
RCMT 0502M0 T5115 Wendeplatten - Tungaloy
Reliable cutting performance and wide material coverage combined with a CVD-coated carbide grade T5115 and full ISO compatibility ensure consistent results in cast-iron turning; order the insert via Metav Werkzeuge or consult their specialists for tailored application advice. RCMT 0502M0 T5115 – ISO turning insert by Tungaloy, CVD-coated carbide, for turning A RCMT0502M0 T5115 ISO-standard turning insert for external and internal turning, optimised for cast-iron machining and designed for secure clamping in ISO-compatible holders. ISO-standard round insert, size 05 CVD-coated carbide grade T5115 for cast iron Single-sided chipbreaker with central hole 7° clearance angle and 2.38 mm thickness Stable cutting performance for cast-iron turning The combination of a CVD-coated surface and a robust carbide substrate delivers a balance between wear resistance and edge stability that suits continuous production. The T5115 grade is formulated as a universal choice for cast iron, providing reliable flank life and predictable flank wear. This leads to fewer insert changes, reduced setup time and improved process stability; the coating reduces built-up edge formation, while the substrate maintains cutting-edge integrity under mixed cutting conditions. The result is measurable productivity gains and consistent surface finish in routine turning tasks. Fast, repeatable clamping and easy integration into ISO tool systems Designed to the ISO plate family, the insert's round geometry and central hole with a cylindrical bore plus one-sided countersink ensure positive engagement with a wide range of ISO-compatible holders. The nominal 2.38 mm thickness and the 7° clearance angle support repeatable positioning and vibration damping during heavy cuts. These mechanical features translate into shorter tool-change cycles and predictable machining behaviour. Compatibility with standard clamping systems simplifies tooling logistics and reduces the need for special adapters. Better chip control and economical operation The single-sided chipbreaker provides controlled chip formation tailored to the typical cutting forces found in turning operations on cast iron. Improved chip control reduces interruption, protects workpiece integrity and minimises secondary operations for chip cleanup. Together with the durable carbide substrate and the protective CVD-coated layer, the insert supports longer intervals between indexings and lower tooling expenditure per part, making it a cost-effective choice for batch and continuous production. Application guidance and selection of the correct chipbreaker and grade keep the process efficient and reproducible. Contact Metav Werkzeuge for hands-on application advice on the Tungaloy RCMT0502M0 T5115 insert and to secure suitable quantities—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864550 Manufacturer SKU: TUN6864550 SKU: 6864550-Tungaloy Model series: ISO turning inserts Application: Turning Facts ISO designation: 0502M0 Insert size: 05 Insert thickness: 2.38 mm Corner radius: 0 mm Clearance angle: 7° Hole style: cylindrical hole with one-sided countersink (40°–60°) Special features Shape: round Grade: T5115 Cutting material: CVD-coated carbide Chipbreaker: single-sided With hole: yes Compatible with ISO holders For cast iron machining FAQ What materials is this insert recommended for? The insert is specified for turning cast iron, with the T5115 grade and CVD-coated carbide designed to balance wear resistance and edge stability for that material group. Which ISO designation identifies this insert? The ISO designation is 0502M0, corresponding to the RCMT geometry and the size 05 family for compatibility with standard ISO turning holders. How does the chipbreaker influence machining? The single-sided chipbreaker provides controlled chip formation for turning operations, improving chip control and reducing interruptions during cast-iron machining. Is the insert suitable for internal and external turning? Yes, the ISO round geometry and central hole make the insert suitable for both external and internal turning when paired with compatible holders. What does the central hole and countersink provide? The central hole with a cylindrical bore and one-sided countersink (40°–60°) enables secure, repeatable clamping and stable positioning within ISO-compatible toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0502M0 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated T9215 carbide, ISO RCMT geometry and secure clamping for stable, productive medium‑steel turning; order directly via Metav Werkzeuge or contact our consultants for application advice. RCMT0502M0 T9215 – indexable turning insert (ISO 0502M0) by Tungaloy A RCMT0502M0 T9215 indexable insert engineered for medium‑steel turning, offering CVD‑coated carbide performance with a 7° relief and a cylindrical clamping hole with single‑side countersink. CVD-coated carbide grade T9215 ISO-format RCMT 0502M0 insert Optimised for medium steel machining Cylindrical hole with 40°–60° single-sided countersink Delivering consistent productivity in medium steel turning The RCMT series format ensures predictable cutting behaviour when matched with the correct holder and clamping system. The T9215 grade combines wear resistance with fracture resistance, making it suitable for continuous to light interrupted cuts in medium steel. This balance reduces tool change frequency and supports higher material removal rates, translating into measurable productivity gains on repetitive turning operations. Where stability is available, the geometry permits higher feed rates without compromising component quality. Secure clamping and ISO compatibility for repeatable results Compatibility with the clamping system is governed by form, relief angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole and a single‑side countersink (40°–60°), which provide reliable seating and torque transfer when used with the matching pad and screw. The ISO format RCMT 0502M0 designation simplifies holder selection and catalogue matching, enabling consistent replacement without trial‑and‑error. The 7° relief and 2.38 mm thickness contribute to robust edge support and predictable chip flow. Practical guidance on chip control and application range This insert comes with a one‑sided chipbreaker, which is effective for standard turning tasks in medium steel. Selecting the correct chipbreaker and grade for the workpiece and machining stability is essential: the right combination reduces vibration, improves surface finish and lowers the risk of built‑up edge. The geometry and coating are optimised to work across a broad spectrum of steels, offering a pragmatic solution for batch production or prolonged single‑operation runs where consistency is required. System thinking: mounting, spares and process reliability An ISO‑compliant insert is only one element of the cutting system. A productive setup includes a compatible external holder or boring bar, the correct pad and clamping set, and replacement screws keyed to the insert hole style. The RCMT0502M0 family supports fast indexable changes and simple inventory management thanks to standard dimensions and identifiable marking. Emphasis on component matching and correct torque when clamping safeguards the cutting edge and extends effective tool life, producing repeatable component tolerance and surface quality. Contact Metav Werkzeuge for tailored recommendations on Tungaloy indexable turning inserts (RCMT0502M0 T9215) and to arrange sample packs or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6774035 Manufacturer SKU: TUN6774035 SKU: 6774035-Tungaloy Manufacturer: Tungaloy Core specifications Material: carbide (cemented carbide) Grade/coating: T9215, CVD-coated ISO designation: 0502M0 Format: RCMT0502M0 Application: Turning Thickness: 2.38 mm Relief angle: 7° Size: 05 Corner radius: 0 mm Special features Round insert shape Cylindrical hole with single-sided countersink (40°–60°) One-sided chipbreaker Suitable for continuous to light interrupted cuts System: ISO turning insert requiring compatible holder, pad and clamping screw FAQ What materials is this insert best suited to? The T9215 CVD‑coated carbide grade is designed primarily for medium steel machining; the RCMT0502M0 insert performs well in continuous to light interrupted cuts on these materials. How does the insert secure to the holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) for seating; correct pad geometry and clamping screw torque ensure repeatable, secure fixation for the RCMT format. Which chipbreaker should be selected for roughing? For heavier roughing in stable setups, choose a chipbreaker and cutting parameters that favour larger chip volumes; the one‑sided chipbreaker on this RCMT insert is appropriate for standard roughing in medium steel when combined with adequate setup rigidity. Is the insert compatible with standard RCMT holders? Yes; the ISO RCMT0502M0 format guarantees compatibility with standard RCMT external holders and boring bars that accept size 05, subject to matching the relief angle and tolerance class. What system components should be kept as spares? Maintain spare inserts, matching pads/klemmsatz and replacement screws sized for the cylindrical hole and countersink to avoid downtime and ensure consistent clamping with the RCMT0502M0 inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0502M0 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade that delivers reliable performance in medium to heavy steel turning and copes with intermittent cuts; the ISO form guarantees straightforward compatibility with ISO toolholders. Order the RCMT0502M0 T9225 indexable insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. RCMT 0502M0 T9225 indexable insert — ISO turning insert, CVD-coated carbide by Tungaloy RCMT 0502M0 T9225 is an ISO-form turning insert designed for medium to heavy steel machining, offering enhanced toughness for variable engagement and interrupted cuts. ISO RCMT0502M0 format for secure fit CVD-coated carbide grade T9225 for steel 7° clearance angle for stable cutting Cylindrical hole with single-sided countersink High-performance grade for demanding steel turning The CVD-coated T9225 grade combines a hard, wear-resistant coating with a tough carbide substrate to balance tool life and fracture resistance. For medium to heavy steel turning and operations with light interruptions, this grade offers a predictable compromise between wear protection and edge strength. The coating reduces flank wear while the substrate absorbs shock from changing cut conditions, which translates into fewer tool changes and more consistent cycle times. Secure seating and ISO compatibility for predictable set-up Constructed to the ISO RCMT0502M0 envelope, the insert ensures compatibility with corresponding holders by form, clearance angle and tolerance. The round insert geometry and standardised hole pattern—cylindrical hole with one-sided countersink (40°–60°)—facilitates repeatable clamping and accurate seating. This reduces run-out and stabilises cutting forces, making set-up quicker and minimising scrap during process changes. Controlled chip flow and edge stability for reliable finishing Equipped with a single-sided chipbreaker, the insert promotes controlled chip formation in continuous and mildly interrupted cuts. The modest 7° clearance angle helps maintain edge engagement without excessive rubbing, supporting a consistent surface finish while preserving the cutting edge. In practice, this means the insert delivers stable cutting behaviour across varied feed rates and depths, simplifying machining parameter selection for production runs. System thinking: integration, maintenance and recommended use The turning insert is intended for use with a matching ISO external holder or boring bar, plus a suitable clamping kit and replacement screws as part of the system. Given the 2.38 mm plate thickness and round form, the insert is best applied to external and internal turning tasks where robustness is required rather than ultra-fine finishing. Select the chipbreaker and grade according to workpiece material and machining stability to optimise productivity and tool life. Contact Metav Werkzeuge for tailored cutting data and application support — order the RCMT 0502M0 T9225 indexable insert through Metav Werkzeuge or ask our specialists for recommended holder pairings and cutting parameters Technical data Article number: 6781194 Manufacturer SKU: TUN6781194 SKU: 6781194-Tungaloy Core data Plate designation: RCMT0502M0 Plate size: 05 Plate thickness: 2.38 mm Clearance angle: 7° Corner radius: 0 mm Special features Grade/coating: T9225, CVD-coated carbide Shape: round indexable insert Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Intended application: Turning (external and internal) Series: ISO turning indexable inserts FAQ What materials is this insert designed to machine? The RCMT 0502M0 T9225 indexable insert is designed primarily for steel machining in medium to heavy applications; the T9225 grade is chosen for robustness under variable engagement and lightly interrupted cuts. How does the T9225 grade differ from other carbide grades? Tungaloy’s T9225 is a CVD-coated carbide grade that emphasises toughness and stable chip formation for productive steel turning, offering a balance between wear resistance and edge strength compared with harder, more brittle grades. Is the RCMT0502M0 compatible with standard ISO holders? Yes, the insert conforms to the ISO RCMT0502M0 form; compatibility depends on matching form, clearance angle, tolerance class, fastening method, size and thickness of the holder or boring bar. What cutting conditions suit this insert best? The insert performs well at moderate to high material removal rates in steel, especially where cutting conditions vary or intermittent cutting occurs; the single-sided chipbreaker supports stable chip control across a range of feeds. What should be checked when fitting the insert into a holder? Ensure correct seating by checking the axial and radial position, the condition of the clamping kit and the screw torque; the cylindrical hole plus counterbore design aids repeatable clamping for minimal run-out. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0502M0 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO-compliant RCMT0502M0 geometry combined with the TH10 uncoated carbide grade for low cutting forces and consistently clean surfaces; the round, 2.38 mm-thick insert ensures reliable clamping and simple indexability. Order genuine Tungaloy inserts via Metav Werkzeuge or consult the specialists for application matching and process optimisation. RCMT 0502M0 TH10 — ISO turning insert for general-purpose turning by Tungaloy RCMT0502M0 TH10 is an ISO‑standard turning insert designed for external and internal turning of non‑ferrous and delicate materials, offering a sharp, uncoated cutting edge and a secure clamping interface. Universal TH10 grade for non‑ferrous alloys Round 05 shape for flexible clamping 7° relief for reduced cutting forces 2.38 mm thickness for stable engagement Higher productivity through lower cutting forces and cleaner finishes The combination of the TH10 uncoated carbide grade and the insert’s geometry delivers a noticeably lower cutting resistance, which translates into reduced spindle load and improved cycle times. The sharp, uncoated cutting edge supports fine surface quality when working with aluminium, copper alloys and similar materials, reducing the need for secondary finishing. For production environments that prioritise throughput and repeatability, the insert’s ISO‑compliant design and predictable edge behaviour contribute to stable machining parameters and reliable part quality. Secure clamping and simple indexing for uninterrupted operation The round 05 form, central hole with cylindrical profile and one‑sided countersink (40°–60°) provides straightforward mounting and dependable fixation in compatible holders. A relief angle of 7° and a plate thickness of 2.38 mm ensure a balance between accessibility for finishing cuts and resistance to chipping under variable feeds. The single‑sided chipbreaker is designed to control swarf formation for the intended material range, making the insert easy to index and replace without extensive setup changes. Application guidance and workshop benefits Intended for general turning operations, the insert is compatible with standard ISO turning toolholders and is particularly effective where a low cutting force and clean appearance are required. Selecting the appropriate chipbreaker and cutting parameters for the workpiece material will extend service life and maintain surface integrity. For mixed‑series production or small‑batch scenarios, the robust clamping interface and straightforward geometry reduce changeover time and simplify inventory management of indexable inserts. Order genuine Tungaloy RCMT0502M0 TH10 inserts through Metav Werkzeuge for reliable turning performance — for technical guidance or to verify holder compatibility contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6805860 SKU (manufacturer): TUN6805860 Model series: ISO turning indexable inserts Designation: RCMT0502M0 Grade: TH10 Material: cemented carbide Manufacturer: Tungaloy Core specifications Thickness: 2.38 mm Relief angle: 7° Size: 05 Corner radius: 0 Hole: with central hole Special features Round insert form Cylindrical hole with one‑sided countersink (40°–60°) Single‑sided chipbreaker Uncoated cemented carbide cutting edge Intended use: turning (external and internal) ISO‑standard insert geometry FAQ What materials is this insert suitable for? The RCMT0502M0 TH10 insert from Tungaloy is intended primarily for non‑ferrous materials and applications that benefit from an uncoated, sharp cutting edge; it is well suited to aluminium and similar alloys. Is the insert compatible with standard ISO turning holders? Yes, the ISO‑compliant geometry of the RCMT0502M0 allows fitting into holders that accept round 05 inserts with a central clamping hole and corresponding tolerances. How does the TH10 grade affect machining? The TH10 uncoated carbide grade provides a sharp, low‑friction edge that reduces cutting forces and promotes cleaner surface finishes in the specified material range for this insert. What are the key dimensions to check before ordering? Verify the insert designation RCMT0502M0, the 2.38 mm plate thickness, the 7° relief angle and the size code 05 to ensure compatibility with the intended holder and application. How is chip control handled with this insert? The RCMT0502M0 features a single‑sided chipbreaker tailored to the TH10 grade and typical non‑ferrous applications, aiding in effective swarf management during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
RCMT 0602M0 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability and ISO-indexed RCMT geometry for consistent, stable turning of heat‑resistant alloys and hard materials; order directly via Metav Werkzeuge or consult our specialists for machining guidance. RCMT 0602M0 AH8005 – ISO turning insert, PVD-coated carbide, with hole · Tungaloy A RCMT 0602M0 AH8005 insert designed for precision external and internal turning in ISO-indexed tool systems. PVD-coated carbide for high wear resistance ISO-indexed RCMT geometry for easy indexing 7° relief angle for secure cutting With hole and 40°–60° countersink Reliable performance for demanding materials The AH8005 grade is a PVD-coated carbide engineered for wear resistance when machining heat‑resistant alloys and other hard workpiece materials. In stable set-ups the coating and substrate combination reduces flank wear and extends usable life, which supports predictable production cycles and lower tool-change frequency. The result is a measurable contribution to process efficiency and component repeatability in serial and batch turning operations. Precise geometry and clamping for consistent cuts The insert follows the ISO RCMT specification and features a 7° relief angle, a single-sided chipbreaker and a central hole with a cylindrical bore plus a one-sided countersink (40°–60°). With a 2.38 mm thickness and round 06 format, the geometry enables secure clamping in compatible holders and boring bars. The chipbreaker controls chip form for typical turning tasks, reducing heat accumulation and improving surface finish while simplifying swarf management in both external and internal turning. System compatibility and application advice Designed as part of a system — an ISO-indexed insert, a matching external holder or boring bar, shim/clamp set and replacement screws — the insert is suitable for turning operations where material, cutting strategy and assembly stability are matched to the grade and chipbreaker. For machining of heat‑resistant alloys and harder steels, the AH8005 grade offers a balance between durability and stable cutting. Should additional guidance on holder compatibility or selection of an alternative chipbreaker be required, technical advisors can provide tailored recommendations for the machining scenario. Contact Metav Werkzeuge for application-specific recommendations on Tungaloy inserts and quote the SKU TUN6967041 when enquiring by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6967041 SKU: 6967041-Tungaloy Manufacturer SKU: TUN6967041 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: RCMT0602M0 AH8005 Facts Thickness: 2.38 mm Relief angle: 7° Size: 06 Corner radius: 0 Special features Material: carbide Coating: PVD Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) ISO geometry: RCMT0602M0 Typical application: external and internal turning Grade: AH8005 — wear-resistant for heat‑resistant alloys and hard materials System components: insert, matching holder or boring bar, shim/clamp set, replacement screws FAQ What applications is this insert suited for? The RCMT 0602M0 AH8005 insert is intended for external and internal turning, especially where heat‑resistant alloys or harder materials require a wear‑resistant PVD‑coated carbide grade. How does the chipbreaker affect performance? The single-sided chipbreaker on the RCMT 0602M0 controls chip form and evacuation, helping the AH8005 grade maintain stable cutting conditions and improved surface finish during turning. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, clamping system, size and thickness; the RCMT geometry requires an ISO-indexed RCMT external holder or boring bar matched to the insert dimensions. Is the insert indexed or reversible? The ISO RCMT geometry is indexable; the RCMT 0602M0 AH8005 insert can be rotated to new cutting edges subject to the insert’s corner radius and wear condition. What information should be provided when enquiring about this SKU? Please reference the designation RCMT0602M0 AH8005 and the manufacturer SKU TUN6967041 to ensure precise identification for ordering or technical consultation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0602M0 AH8015 Wendeplatten - Tungaloy
Efficient machining of heat‑resistant alloys with a balance of wear resistance and edge stability thanks to a PVD‑coated carbide grade and an optimised single‑sided chipbreaker; suitable for ISO‑compliant tool systems. Order genuine inserts or consult Metav Werkzeuge for selection and availability. RCMT0602M0 AH8015 RCMT turning insert by Tungaloy — ISO turning insert, PVD-coated carbide A RCMT0602M0 AH8015 Tungaloy insert for precision external and internal turning, designed for ISO‑standard tool systems and heat‑resistant alloy machining. PVD-coated carbide grade AH8015 ISO-compliant RCMT0602M0 geometry Single-sided chipbreaker for controlled chips Cylindrical hole with 40°–60° countersink Longer tool life through material and coating The combination of a PVD‑coated carbide substrate and the AH8015 grade delivers noticeably improved wear resistance in demanding turning tasks. For operations on heat‑resistant alloys the coated substrate reduces flank and crater wear, which extends edge life and lengthens intervals between tool changes. This means fewer unplanned stops and a steadier production rhythm, giving a measurable contribution to process efficiency without sacrificing surface quality. Predictable chip control and secure clamping A dedicated single‑sided chipbreaker together with the central hole and one‑sided countersink produces consistent chip forms during both external and internal turning. The result is safer chip evacuation and reduced risk of chip entanglement, lowering the need for manual intervention. Combined with the insert’s 7° clearance angle, the geometry reduces rubbing and heat build‑up, improving cutting stability and enabling more reliable cycle times on lathes and turning centres. Seamless system compatibility for reduced setup time Being ISO‑compliant in form and size, the insert integrates into standard holder systems where compatibility is governed by shape, clearance, tolerance class, fastening, size and thickness. The insert forms part of a system that includes the matching external holder or boring bar, shim/clamping set and replacement screws; selecting the correct chipbreaker and grade according to workpiece material and machining conditions helps to secure repeatable results and predictable tool life. This clarity simplifies tool selection and reduces setup complexity for production environments. For genuine Tungaloy quality and tailored application advice, contact Metav Werkzeuge (info@metav-werkzeuge.com, +49 2822 7131930) to source RCMT0602M0 inserts and receive expert selection support Technical data Article number: 6967042 SKU: 6967042-Tungaloy Manufacturer SKU: TUN6967042 Model series: ISO‑Drehwendeschneidplatten Material: Carbide Grade/coating: AH8015 (PVD‑coated) Facts Thickness: 2.38 mm Size: 06 ISO code: 0602M0 Clearance angle: 7° Corner radius: 0.00 mm Special features ISO turning indexable insert Single‑sided chipbreaker Cylindrical hole with one‑sided countersink (40°–60°) Intended application: turning of heat‑resistant alloys Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The RCMT0602M0 AH8015 insert is especially formulated for machining heat‑resistant alloys; the PVD‑coated carbide offers a balance of wear resistance and edge stability for such materials. How does the chipbreaker affect machining performance? The single‑sided chipbreaker on the insert promotes controlled chip formation and evacuation, reducing interruptions and improving process consistency during turning operations. Is the insert compatible with standard holders? Yes. The RCMT0602M0 geometry is ISO‑compliant and compatible with holders and boring bars that match by form, clearance angle, tolerance class, fastening method, size and thickness. What does the central hole and countersink provide? The cylindrical hole with a one‑sided countersink (40°–60°) ensures reliable clamping and correct seat in ISO‑standard toolholders, improving repeatability and torque distribution at the fastening point. Which feature most contributes to longer tool life? The combination of the PVD coating and the AH8015 carbide grade on the RCMT0602M0 insert significantly reduces wear and maintains edge stability, which together extend effective tool life and reduce downtime. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
RCMT 0602M0 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing, low cutting forces and ISO compatibility to maintain consistent productivity in turning operations; order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. RCMT RCMT0602M0 NS9530 – ISO turning insert (finishing) by Tungaloy A RCMT RCMT0602M0 NS9530 is an ISO‑standard indexable turning insert engineered for finishing steel with a sharp cutting edge, low cutting forces and reliable clamp fixation. ISO‑standard RCMT insert for turning Uncoated cermet grade NS9530 for finishing 7° clearance angle for low cutting forces Cylindrical hole with countersink for secure clamping Achieve superior surface finish with uncoated cermet technology The uncoated cermet grade NS9530 is formulated as a finishing grade for steel, offering a very sharp cutting edge that reduces cutting forces and supports continuous cuts and small depths of cut. For users requiring improved surface integrity, the insert’s composition promotes consistent contact with the workpiece and a stable cutting action. The term cermet refers to a ceramic‑metal composite that combines hardness and edge retention with enough toughness for finishing operations, which leads to reliably smooth component surfaces. Secure clamping and ISO compatibility to simplify setup Compatibility with the toolholder is determined by geometry, clearance angle, tolerance class, fastening type, size and thickness. The insert is supplied with a cylindrical hole and a one‑side countersink (40°–60°) to ensure a positive, repeatable clamp fit in standard ISO holders. The system typically comprises the ISO insert, a matching external holder or boring bar, a backing pad/clamping kit and replacement screws, enabling quick indexation and minimal downtime during tool changeovers. Process stability and economical finishing A sharp edge and low cutting forces help reduce workpiece distortion and machine load, which supports process stability in high‑volume or repeatable finishing tasks. The RCMT geometry in size 06 and the 7° clearance angle are optimised to deliver consistent chip formation when paired with a suitable one‑sided chipbreaker and machining parameters aligned to finishing. This combination can improve cycle reliability and reduce rework, representing a rational investment in productive turning. Practical application notes for turning operations Intended primarily for turning applications, the insert is suitable for both external and internal turning where a high surface quality is required. Select the chipbreaker and grade to match the workpiece material and machining stability; a finishing sort like NS9530 is particularly effective on continuous cuts with small depth of cut. In this context, chipbreaker refers to the feature that influences chip shape and evacuation—choosing the correct type helps prevent built‑up edge and keeps the process predictable. For precision finishing with Tungaloy cermet inserts contact Metav Werkzeuge for tailored recommendations and prompt supply. Technical data Article number: 6998611 Manufacturer SKU: TUN6998611 SKU: 6998611-Tungaloy Model series: ISO turning inserts Facts ISO code: 0602M0 Size: 06 Thickness: 2.38 mm Clearance angle: 7° Corner radius: 0 mm Special features Grade: NS9530, uncoated cermet Shape: round Hole: cylindrical with one‑side countersink (40°–60°) Chipbreaker: one‑sided Application: turning; finishing for steel; suited to continuous cuts and small depths of cut FAQ What materials is this insert intended for? The RCMT0602M0 NS9530 insert is a finishing cermet grade designed primarily for turning steel in continuous cuts and small depths of cut. How does the insert attach to the holder? The insert uses a cylindrical hole with a one‑side countersink (40°–60°) for secure clamping in compatible ISO toolholders; compatibility is governed by form, clearance angle, tolerance and thickness. Is the grade coated or uncoated and what does that mean? This item is an uncoated cermet (NS9530); uncoated grades provide very sharp edges for finishing and are chosen where surface quality and low cutting forces are priorities. Which geometries and angles influence tool selection? Key parameters include the 7° clearance angle, the round size 06 geometry and the 0 mm corner radius; these features determine cutting action, edge exposure and suitability for finishing tasks. Can the insert be used for both external and internal turning? Yes, the insert is intended for turning and can be used for both external and internal operations when paired with the appropriate holder and machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0602M0 T5115 Wendeplatten - Tungaloy
Reliable machining outcomes result from the combination of a CVD‑coated carbide grade T5115 and an ISO‑standard RCMT geometry, delivering stable chip formation and consistent tool life; order directly via Metav Werkzeuge or request advice from our application consultants. RCMT 0602M0 T5115 indexable insert for turning — CVD‑coated carbide, for cast iron | Tungaloy The RCMT0602M0 T5115 is an ISO‑standard round indexable insert designed for external and internal turning of cast iron, featuring a one‑sided chipbreaker, a 7° clearance and a cylindrical hole with single‑side countersink for secure fastening. ISO-standard insert geometry CVD-coated carbide T5115 grade One-sided chipbreaker for cast iron Round 06 size, 2.38 mm thickness High process reliability and economical wear resistance The combination of a CVD‑coated surface and a carbide substrate in grade T5115 provides an economical balance of wear resistance and edge strength for machining cast iron. The coating reduces adhesion and abrasion at the cutting edge, which translates into longer tool life and fewer indexings. For production environments where uptime and predictability matter, this makes the insert a practical choice for steady, repeatable results when turning grey and nodular cast irons. Secure clamping and ISO compatibility for repeatable setups Designed to ISO specifications, the insert’s geometry ensures compatibility with standard external and internal holders when form, clearance angle, tolerance class, fastening method, size and thickness are matched. The defined 7° clearance and the cylindrical hole with single‑side countersink support reliable seating and torque transmission. Correct pairing with a matching holder, shim and clamping set gives repeatable positioning and reduced runout, which benefits surface finish and dimensional consistency in serial production. Chip control and edge design tailored to stability The one‑sided chipbreaker is optimised for chip formation in cast iron and supports consistent evacuation when machining under stable conditions. The round insert format and the 2.38 mm plate thickness provide a robust cutting geometry, while the 0 mm corner radius delivers a sharp effective edge for interrupted cuts and fine turning operations. In practice, the chipbreaker channel modifies the cutting edge contact to reduce built‑up edge and promote continuous chips where appropriate, easing post‑process cleaning and extending tool life. Practical system advice and selection criteria An effective system comprises the indexable insert, a compatible holder, a shim or clamp set and the correct replacement screws. Select the chipbreaker and the T5115 grade to match the workpiece material, machining strategy and machine‑tool rigidity. Where stiffness is limited, favour lower depths of cut and ensure secure fastening; in rigid setups, take advantage of the grade’s wear resistance for longer cutting windows. For unclear requirements, technical consultation is available to align insert choice with production targets and cycle times. For reliable cast‑iron turning with Tungaloy’s CVD‑coated T5115 grade, contact Metav Werkzeuge for availability and machining guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6864713 SKU: 6864713-Tungaloy Manufacturer SKU: TUN6864713 Model series: ISO indexable turning inserts Material: carbide Description: RCMT0602M0 T5115 Tungaloy indexable insert Facts Thickness: 2.38 mm Clearance angle: 7° ISO code: 0602M0 Size: 06 Corner radius: 0 mm Special features CVD‑coated carbide grade T5115 Universal grade for cast iron machining One‑sided chipbreaker Round insert with hole Cylindrical hole with single‑side countersink (40°–60°) ISO‑standard insert for external and internal turning Compatible with standard holders, shim/clamp sets and replacement screws FAQ What materials is this insert suitable for? The RCMT0602M0 T5115 indexable insert is specified as a universal T5115 grade for machining cast iron and performs best where wear resistance and edge stability are required. How is the insert secured to the holder? The insert uses a cylindrical hole with a single‑side countersink; this seating style provides secure fastening when combined with the correct holder, shim and clamping set. What is the clearance angle and why does it matter? The insert has a 7° clearance angle; this geometry reduces flank rubbing and is important for achieving consistent surface finish and prolonging tool life in turning operations. Is the chipbreaker suitable for interrupted cuts? The one‑sided chipbreaker supports controlled chip formation in cast iron; for heavily interrupted cuts, evaluate holder rigidity and machining parameters to maintain edge stability. Which insert size and thickness should be expected? This round insert is ISO size 06 with a plate thickness of 2.38 mm, offering a compact geometry suitable for both external and internal turning where space is limited. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0602M0 T9215 Wendeplatten - Tungaloy
Take advantage of a high-productivity turning solution that combines CVD-coated carbide wear resistance with a proven chip control geometry for medium-steel machining. The compact round format and ISO compatibility ensure swift tool changes and consistent results; order the insert directly via Metav Werkzeuge or consult our specialists for tool pairing and inventory advice. RCMT 0602M0 T9215 indexable turning insert for turning applications — Tungaloy RCMT 0602M0 T9215 is a CVD-coated carbide indexable insert designed for medium steel turning; round 06 format with a 7° clearance angle, single-sided chipbreaker and a cylindrical hole with a one-sided countersink. CVD-coated carbide for medium-steel turning ISO-compatible round insert, size 06 7° clearance angle for reliable cutting Single-sided chipbreaker, cylindrical hole High productivity for medium-steel turning The RCMT 0602M0 T9215 insert is engineered for efficient material removal in medium-steel applications. The CVD-coated carbide substrate of the T9215 grade combines elevated wear resistance with controlled toughness, so that machinists can run higher throughput with predictable tool life. This balance is particularly advantageous for continuous to slightly interrupted cuts where stability and edge integrity determine cycle times and part quality. Precise fit and dependable cutting geometry Compatibility with holders is determined by insert form, clearance, tolerance class, fixing method, size and thickness; the round 06 format and 7° clearance angle deliver a secure contact geometry that reduces chatter and supports consistent cutting forces. The ISO compatibility of the insert simplifies holder selection and enables rapid changeover in multi-tool setups, reducing downtime and improving process reliability across varied turning operations. Controlled chips and extended tool life A single-sided chipbreaker matched to the insert grade promotes stable chip formation and evacuation, lowering the risk of surface damage and secondary operations. The T9215 grade is formulated for medium steels to offer good wear resistance without sacrificing fracture resistance, which means fewer unexpected insert changes and more predictable production planning. The insert is suitable for continuous to lightly interrupted cuts where consistent chip control is essential. Practical handling and system requirements The insert’s 2.38 mm thickness and round 06 format, together with the cylindrical hole with a 40°–60° countersink, allow secure clamping with standard underplates, clamp sets and replacement screws. For optimal results, select a holder and backing suitable for the insert geometry and the required stability; choose the appropriate chipbreaker and grade according to workpiece material and the intended cutting conditions. If clarification is needed on toolholders or clamping, Metav Werkzeuge can advise on compatible systems and consumables. For expert assistance in integrating Tungaloy turning inserts into the production process, contact Metav Werkzeuge for tailored recommendations and fast supply at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6774018 SKU: 6774018-Tungaloy Manufacturer SKU: TUN6774018 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Size: 06 Thickness: 2.38 mm Clearance angle: 7° Corner radius: 0 mm Countersink angle: 40°–60° Special features CVD-coated carbide (T9215) Single-sided chipbreaker Round insert format Cylindrical hole with one-sided countersink ISO-compatible for external and internal turning Suitable for continuous to lightly interrupted cuts Requires matching holder, underplate/clamp set and replacement screws FAQ What workpiece materials is this insert best suited to? The RCMT 0602M0 T9215 insert and its T9215 grade are optimised for medium steels; the CVD-coated carbide substrate provides wear resistance suitable for productive turning. Which holder type is required for mounting the insert? An ISO-compatible external or internal turning holder designed for round 06 inserts is required; compatibility depends on the holder’s form, clearance, tolerance class, fixing and thickness. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert promotes predictable chip formation and evacuation, improving surface finish and reducing the risk of rework during continuous to lightly interrupted cuts. Can the insert handle interrupted cuts or heavy machining? The insert performs best in continuous to slightly interrupted cuts; for heavy or highly interrupted conditions, assess stability and consider a grade or geometry designed specifically for such loads. What does the hole and countersink specification mean for clamping? The cylindrical hole with a 40°–60° one-sided countersink ensures reliable clamping with standard screws and clamp sets, supporting consistent seat and repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0602M0 T9225 Wendeplatten - Tungaloy
Benefit from the CVD-coated carbide T9225 grade and the ISO‑standard RCMT form, which together ensure robust performance in medium to heavy turning and predictable tool life; order via Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation. RCMT 0602M0 T9225 turning insert — CVD-coated carbide for medium to heavy steel turning by Tungaloy A RCMT0602M0 T9225 indexable insert for turning, engineered for reliable performance in interrupted and varying engagement conditions with a 7° clearance angle. CVD-coated carbide for extended life Robust universal grade T9225 ISO‑form insert, round 06 size Cylindrical hole with 40°–60° countersink Increased productivity through tougher cutting edges The T9225 grade is a CVD‑coated carbide developed for the demands of medium to heavy steel machining; its combination of wear resistance and enhanced toughness reduces edge chipping under variable engagement. As an ISO‑standard insert in the RCMT form, the component is intended to be used with compatible turning holders to achieve repeatable results and reduce setup variability. The CVD coating provides thermal stability at elevated cutting speeds while the substrate maintains resistance to mechanical shock, meaning fewer unscheduled tool changes and improved cycle time. This results in a measurable improvement in throughput where interrupted cuts or changing conditions are common. Secure clamping and simple integration in ISO systems Designed with a cylindrical hole and a one‑sided countersink (40°–60°), the insert offers secure and reproducible clamping on appropriately matched tool holders. Compatibility with a holder is defined by form, clearance angle (7°), tolerance class, fixing method, size and thickness (2.38 mm); these parameters should be checked during fixture selection to ensure correct seating and stability. The round 06 form and single‑sided chipbreaker simplify orientation and make the module straightforward to interchange within an established ISO tooling system. As a result, process set‑up is faster and accuracy between successive indexings is maintained. Practical recommendations and cost-efficiency in daily use For reliable results choose the T9225 insert grade together with a chipbreaker suited to the workpiece and machining stability. The insert’s geometry—size 06, 0 mm corner radius—is aimed at general turning tasks where form and finish are secondary to productivity and tool life. Selecting the matching holder and tightening torque for the cylindrical hole with countersink ensures consistent clamp force and reduces the risk of vibration. Economically, the robust grade reduces scrap and increases effective machining hours, supporting a lower total cost of machining per workpiece. For applications with different materials or extreme cutting parameters, adapt feed and speed values and select a chipbreaker and substrate accordingly. For tailored advice on selecting the right T9225 RCMT insert and compatible holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to secure the correct tooling from Tungaloy and optimise machining performance Technical data Article number: 6781195 SKU: 6781195-Tungaloy Manufacturer SKU: TUN6781195 Manufacturer article number: 6781195 Model series: ISO turning indexable inserts Name: RCMT0602M0 T9225 Tungaloy insert Core data Size: 06 Thickness: 2.38 mm Clearance angle: 7° Corner radius: 0 mm Countersink angle: 40°–60° Hole: with hole Design & special features Shape: round Grade: T9225 (CVD-coated carbide) Chipbreaker: single-sided Mounting: cylindrical hole with one-sided countersink Application: turning ISO designation: 0602M0 Compatibility determined by form, clearance angle, tolerance class, fixing, size and thickness FAQ What materials is this insert intended for? The RCMT0602M0 T9225 insert is formulated primarily for steel machining and performs best in medium to heavy turning operations where toughness and wear resistance are required. How does the T9225 grade influence tool life? The T9225 CVD coating provides thermal and wear resistance while the carbide substrate improves toughness; combined, these properties extend the service life of the insert and reduce unscheduled changes. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle (7°), tolerance class, fixing and the insert’s 06 size and 2.38 mm thickness; use holders designed for RCMT‑form inserts with a cylindrical hole and countersink. Is the chipbreaker suitable for finishing passes? The single‑sided chipbreaker is optimised for efficient chip control during general turning and heavier cuts; for fine finishing, consider an insert with a geometry and corner radius tailored to finishing feed rates. Can the insert be used for interrupted cuts? Yes, the toughness of the T9225 grade makes this insert well suited to interrupted and variable engagement conditions commonly encountered in roughing and general turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0602M0 TH10 Wendeplatten - Tungaloy
High-performance uncoated carbide insert in TH10 grade and ISO geometry ensures low cutting forces and clean surface finishes for turning non‑ferrous materials; its single‑sided chipbreaker and cylindrical hole with a 40°–60° countersink provide reliable clamping and controlled chip flow. Benefit from ISO compatibility and a compact 2.38 mm thickness for tight tool setups — order directly via Metav Werkzeuge or contact their specialists for machining recommendations. RCMT0602M0 TH10 — Turning insert (ISO), uncoated carbide, Tungaloy The RCMT0602M0 TH10 is an ISO‑standard indexable insert designed for precise external and internal turning, offering a sharp universal grade for non‑ferrous work and applications requiring low cutting forces. ISO‑standardised geometry for holder compatibility Uncoated carbide for low cutting forces Single‑sided chipbreaker for controlled chip flow Cylindrical hole with 40°–60° countersink Consistent surface quality from a sharp, universal grade The combination of an uncoated carbide substrate and the TH10 grade delivers a sharp cutting edge that reduces the energy required per cut. This characteristic is particularly beneficial when machining non‑ferrous materials and mixed batches where low cutting forces translate into reduced tool vibration and markedly improved surface finishes. The insert’s geometry supports steady material removal and helps maintain consistent dimensional accuracy across runs, lowering rework and inspection efforts. Reliable seating and chip control for compact setups Designed with an ISO profile and a cylindrical hole with a 40°–60° countersink, the insert guarantees secure clamping in compatible holders. The modest 2.38 mm thickness and 7° relief allow use in compact toolheads and tight toolpost arrangements without compromising rigidity. The single‑sided chipbreaker promotes predictable chip formation, which simplifies chip evacuation and reduces interruptions in high‑mix production environments — a decisive advantage where machine uptime and process stability matter. Practical selection advice for turning operations For external and internal turning, choose a holder geometry and tolerance class that match the insert’s ISO form, size and thickness to ensure repeatable seating and correct rake/clearance relationships. The sharp universal nature of the grade supports fine finishing and light roughing in softer alloys; pairing the insert with a suitable feed and speed strategy reduces built‑up edge and extends effective tool life. Where stability is limited, favour lighter cuts and higher feed to maintain chip control and surface integrity. Efficiency and application fit in production workflows Using an ISO‑compatible indexable insert streamlines inventory and changeovers across a range of turning tasks. The RCMT0602M0 TH10 is particularly suited for shops that process aluminium, brass and similar alloys, delivering a cost‑efficient balance between performance and longevity. Clear specification of holder compatibility — form, clearance angle, tolerance class, fastening method, nominal size and thickness — avoids assembly errors and accelerates tool change routines, supporting a more predictable production flow. For tailored application support or to procure genuine Tungaloy RCMT0602M0 TH10 indexable inserts, contact Metav Werkzeuge for expert advice and supply via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6805864 Manufacturer's SKU: TUN6805864 SKU: 6805864-Tungaloy Material: Carbide Model series: ISO‑Drehwendeschneidplatten Designation: RCMT0602M0 Brand: Tungaloy Application: Turning Dimensions & measurable data Thickness: 2.38 mm Relief angle: 7° Size: 06 Corner radius: 0 mm Hole style: Cylindrical hole + single‑side countersink (40°–60°) Features & special characteristics Grade: TH10 (uncoated) Chipbreaker: Single‑sided Insert form: Round ISO indexable insert Typical use: External and internal turning Compatibility factors: Form, relief angle, tolerance class, fastening, size, thickness Benefit focus: Low cutting forces, clean surface finishes FAQ Which materials are best suited for this insert? The RCMT0602M0 TH10 insert is optimised for non‑ferrous alloys such as aluminium and brass; the uncoated TH10 grade supports low cutting forces and clean finishes in these materials. How does the insert seat in standard holders? Seating depends on matching the ISO form, clearance angle and thickness; the RCMT0602M0 has a 7° relief and a cylindrical hole with a 40°–60° countersink for secure clamping in compatible holders. Is this insert suitable for finishing operations? Yes, the sharp universal grade and uncoated carbide substrate make the insert well suited to finishing passes where surface quality and low cutting forces are priorities. What chip control can be expected? The single‑sided chipbreaker promotes predictable, short chip forms in recommended materials, aiding evacuation and reducing interruptions during continuous turning cycles. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
RCMT 0803M0 AH8005 Wendeplatten - Tungaloy
Reliable chip control and high-temperature resistance from the PVD-coated carbide AH8005 grade, combined with ISO compatibility and a compact 3.18 mm plate thickness, deliver consistent performance for stable turning operations; order the RCMT0803M0 AH8005 insert directly via Metav Werkzeuge or consult our specialists for application advice. RCMT 0803M0 AH8005 turning insert – ISO-format indexable insert by Tungaloy A RCMT0803M0 AH8005 indexable insert optimised for external and internal turning of heat-resistant alloys and hard materials where stable machining and controlled chips are required. ISO RCMT0803M0 format for standard holders PVD-coated carbide AH8005 grade Single-sided chipbreaker for controlled chips 3.18 mm thickness with 7° clearance High thermal resistance and consistent wear performance The insert is made from PVD-coated carbide in grade AH8005, designed for sustained contact with heat-resistant alloys and hard materials. The PVD layer improves surface hardness and reduces adhesive wear during interrupted cuts, which translates into longer tool life and fewer indexings. Selecting this indexable insert helps maintain process stability under elevated temperatures and ensures repeatable component quality when machining demanding materials. Predictable chip control for safer production cycles Equipped with a single-sided chipbreaker, the insert offers controlled chip formation in both external and internal turning. The chip geometry promotes short, compact chips that evacuate reliably, reducing the risk of entanglement and minimising secondary finishing. For many workshop set-ups, the combination of the chipbreaker and the insert's geometry reduces cycle interruptions and contributes to more predictable machining throughput. Compatibility and system considerations for easy integration The insert follows the ISO RCMT0803M0 standard, so compatibility is determined by form, clearance, tolerance class, fastening, size and thickness. The 7° clearance and 3.18 mm thickness are key dimensions when matching the plate to an external holder or boring bar; correct shim and clamping sets plus the appropriate fastening screw ensure secure seating and repeatable positioning. The insert sits within a straightforward system comprising the plate, a suitable external holder or bar, a shim/clamping set and spare screws. Practical guidance for application and tool selection When choosing the right combination, pair the AH8005 grade with stable set-ups and moderate to high cutting speeds for optimal life and surface finish. For deeply interrupted cuts or unstable fixturing, consider a more robust holder or reduced axial engagement. The PVD-coated carbide is particularly effective where thermal stability and abrasion resistance are priorities, and the standard ISO form facilitates rapid replacement without extensive requalification of the machining process. For process-critical turning of heat-resistant alloys, contact Metav Werkzeuge to discuss the Tungaloy RCMT0803M0 AH8005 insert and request tailored application advice or availability information via info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6967047 Manufacturer SKU: TUN6967047 SKU: 6967047-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Insert designation: RCMT0803M0 Grade: AH8005 Thickness: 3.18 mm Clearance angle: 7° Hole: with hole; cylindrical hole + one-side countersink (40°–60°) Special features Coating: PVD Chipbreaker: single-sided Shape: round Size: 08 FAQ What materials is this insert suitable for? The RCMT0803M0 AH8005 insert is intended for heat-resistant alloys and other hard materials; the AH8005 grade and PVD coating provide wear resistance and thermal stability for such applications. How does the chipbreaker affect machining? The single-sided chipbreaker on this indexable insert produces compact chips and improves evacuation, which lowers the risk of chip-related interruptions in turning operations. Can this insert be used with standard ISO holders? Yes, the insert follows the ISO RCMT0803M0 form; compatibility depends on matching form, fastening, tolerance class, and thickness with the chosen holder and shim. What are the key dimensions to check when replacing a plate? Check the plate designation RCMT0803M0, the 3.18 mm thickness, the 7° clearance and the hole/countersink style to ensure secure seating and repeatable geometry. Is there a recommended application for maximum life? For best life, use the insert in stable setups on heat-resistant alloys at moderate to high cutting speeds and ensure correct clamping and holder rigidity; the AH8005 grade excels where thermal and abrasive stresses are present. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0803M0 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide performance, a 7° clearance angle and a compact 3.18 mm plate thickness for reliable turning results; order original parts or contact Metav Werkzeuge for application advice and availability. RCMT 0803M0 AH8015 Tungaloy insert — ISO turning insert, PVD-coated carbide, one-sided chipbreaker The RCMT0803M0 AH8015 is an ISO-compliant round turning insert designed for external and internal turning, offering balanced wear resistance and edge stability for heat‑resistant alloys PVD-coated carbide AH8015 One-sided chipbreaker for controlled chips Round plate with cylindrical hole and countersink 7° clearance angle, 3.18 mm plate thickness Higher process efficiency through balanced grade and coating The combination of a PVD-coated carbide grade and an optimised chip geometry delivers measurable process efficiency. The AH8015 grade is engineered to balance wear resistance with edge stability, making it a sensible first choice for machining heat‑resistant alloys where gradual flank wear and a stable cutting edge are critical. This measured balance reduces unexpected interruptions and supports longer effective tool life, which in turn contributes to predictable cycle times and reduced rework. Secure seating and consistent clamping for repeatable results Compatibility with toolholders depends on form factor, clearance angle, tolerance class, fastening method, size and thickness; the round insert’s cylindrical hole with a single‑side countersink (40°–60°) ensures precise seating and reproducible clamping. The 3.18 mm plate thickness and 7° clearance angle maintain a low profile while providing sufficient support under cutting forces. As a result, vibration is minimised and surface finish consistency is improved when the insert is mounted in a matching ISO holder. Chip control and application fit for turning tasks The single‑sided chipbreaker is tailored to chip formation in turning operations, encouraging short, controllable chips during both external and internal turning when paired with an appropriate holder and machining parameters. For general turning of difficult alloys, the combination of the chipbreaker geometry and the AH8015 coating helps maintain edge integrity under thermal load. Choosing the correct chipbreaker and grade for the workpiece material and the machining stability will yield better surface quality and longer indexable insert life. Contact Metav Werkzeuge for tailored application recommendations and to obtain genuine Tungaloy inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and availability Technical data Article number: 6967048 SKU: 6967048-Tungaloy Manufacturer SKU: TUN6967048 Model series: ISO-Drehwendeschneidplatten Designation: RCMT0803M0 Facts Plate thickness: 3.18 mm Clearance angle: 7° Corner radius: 0 mm Size designation: 08 Special features Material: carbide Coating/grade: AH8015 (PVD) Plate form: round Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning (external and internal) FAQ What materials is this insert best suited for? The RCMT0803M0 AH8015 Tungaloy insert is intended as a first choice for general machining of heat‑resistant alloys, offering a balance between wear resistance and edge stability. How does the insert secure in the holder? The round insert seats on a cylindrical hole with a single‑side countersink (40°–60°), enabling uniform clamping when used with a compatible ISO holder. Which feature improves chip control during turning? The one‑sided chipbreaker on the RCMT0803M0 guides chip formation to produce short, controllable chips, particularly useful in external and internal turning. Is this insert suitable for high‑temperature cutting conditions? The AH8015 PVD-coated carbide grade offers improved resistance to thermal wear, making it suitable for machining tougher, heat‑resistant alloys under stable setup conditions. How should the clearance angle influence holder selection? A 7° clearance angle requires a matching holder geometry and tolerance class to ensure proper seating and optimal cutting edge engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0803M0 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precision finishing, low cutting forces and ISO compatibility for consistent production results; order the insert directly via Metav Werkzeuge or ask our consultants if needed. RCMT 0803M0 NS9530 – ISO turning insert for finishing, Tungaloy The RCMT0803M0 NS9530 is an ISO-standard indexable turning insert designed for finishing operations on Stahl, offering a sharp cutting edge and a chipbuster suited to continuous cuts. ISO form RCMT 0803M0, round insert Uncoated cermet grade NS9530, finishing use Sharp cutting edge with low cutting forces Cylindrical hole with single-side countersink Superior finishing quality with minimal cutting force The uncoated cermet grade NS9530 is formulated for precise finishing on Stahl, delivering a sharp cutting edge that reduces built-up edge and lowers cutting forces during continuous cuts. This characteristic leads to a measurable improvement in surface integrity and can reduce the need for secondary finishing operations. With a small corner radius and an insert thickness of 3.18 mm, the geometry supports fine depth-of-cut control and consistent contact with the workpiece, producing reliable dimensional conformity and repeatable surface results. Assured compatibility and stable clamping for repeatable results As an ISO-standard round insert, the component is compatible with holders that match the insert form, clearance, tolerance class, fixing and thickness. The system build—insert, appropriate external holder or boring bar, shim/clamp set and replacement screws—ensures a secure mechanical interface and stable cutting conditions. The 7° clearance helps to prevent rubbing and to maintain a sharp cutting action, while the cylindrical hole with a single-side countersink (40°–60°) permits robust, repeatable clamping and quick indexability, supporting shorter cycle times and predictable tool behaviour. Process efficiency and recommended use cases Designed specifically for finishing, this insert excels with small feeds and continuous cutting strategies; the single-sided chipbreaker complements the sharp edge by controlling chip form for stable evacuation. The combination of the NS9530 substrate and the insert geometry supports long runs with consistent surface quality, which translates into lower overall machining costs and higher throughput. For best results, pair the insert with a rigid holder and select feeds and speeds appropriate for finishing Stahl; the result is improved productivity and reduced rework. For advice on integrating the RCMT 0803M0 NS9530 insert into existing turning processes or to purchase via Metav Werkzeuge, contact Metav Werkzeuge for tailored support and prompt supply. Technical data Article number: 6997727-Tungaloy Manufacturer SKU: TUN6997727 Manufacturer article number: 6997727 Brand: Tungaloy Core specifications Size: 08 Thickness: 3.18 mm Clearance angle: 7° Corner radius: 0 mm Insert form: round Hole: cylindrical hole with single-side countersink (40°–60°) Materials & features Material: carbide Grade: NS9530 (uncoated cermet) Chipbreaker: single-sided Application: turning (finishing) Model series: ISO turning indexable inserts System components: insert, holder, shim/clamp set, replacement screws FAQ What is the intended application for this insert? The RCMT0803M0 NS9530 insert is intended for turning operations, specifically finishing applications on Stahl where a sharp cutting edge and low cutting forces are required. Is the insert compatible with ISO tool holders? Yes, the insert follows ISO form RCMT 0803M0; compatibility depends on matching holder form, clearance, tolerance class, fixing, size and thickness. What is the cutting material and grade? The grade is NS9530, an uncoated cermet designed for finishing Stahl with good surface results and low cutting forces. How does the clamping hole support tool reliability? The cylindrical hole with a single-side countersink (40°–60°) provides secure and repeatable clamping, improving stability and indexability during turning. Can this insert be used for interrupted cuts? As a finishing cermet with a sharp edge and single-sided chipbreaker, the insert is optimised for continuous cuts and small depths of cut; interrupted cutting may reduce edge life and is not the primary use case. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0803M0 T5115 Wendeplatten - Tungaloy
RCMT0803M0 T5115 Wendeplatte für Drehen von Tungaloy Die RCMT0803M0 T5115 ist eine ISO-genormte Wendeplatte für universelles Drehen von Gusseisen und bietet eine ausgewogene Kombination aus Verschleißfestigkeit und Schneidkantenstabilität. CVD-beschichtetes Hartmetall für hohe Standzeit ISO-genormte RCMT0803M0 Form, kompatibel zu Haltern Freiwinkel 7° für stabile Schneidkante Mit Loch: zylindrisches Loch + einseitige Senkung Einseitiger Spanbrecher, optimiert für Gusseisen Hohe Verschleißfestigkeit durch Material und Beschichtung Die RCMT0803M0 T5115 basiert auf Hartmetall mit CVD-Beschichtung, wodurch eine deutlich gesteigerte Verschleißfestigkeit erreicht wird. Die Kombination reduziert flankverschleiß und sorgt für gleichbleibende Geometrie der Schneidkante über längere Zeit. Für Anwender bedeutet das weniger Werkzeugwechsel und konstante Bauteilqualität bei längeren Losgrößen. Effiziente Anwendung beim Außen- und Innendrehen Für das Drehen von Gusseisen wurde die Sorte T5115 entwickelt, die ein ausgewogenes Verhältnis zwischen Zähigkeit und Härte bietet. Die Platte eignet sich sowohl für Außen- als auch für Innendrehoperationen; der einseitige Spanbrecher optimiert die Spanbildung speziell bei bruchempfindlichen Werkstoffen. Anwender profitieren von stabilen Zerspanungsbedingungen und reproduzierbarer Oberflächengüte. Einfache Integration in ISO-Systeme und Halter Die Ausführung im RCMT-Format garantiert ISO-genormte Maße und damit einfache Austauschbarkeit in Standardhaltern. Mit einem Freiwinkel 7°, einer Plattendicke von 3,18 mm und einem zylindrischen Loch mit einseitiger Senkung (40°–60°) passt die Platte in vielfältige Systemaufbauten. Das erleichtert die Lagerhaltung und reduziert Maschinenstillstände durch schnellen Plattenwechsel. Zielgruppe: Werkstätten und Serienfertigung Die Platte richtet sich an Zerspanungsbetriebe, die konstante Produktivität und verlässliche Prozesse benötigen. Durch die robuste Materialauswahl und den optimierten Spanformer entsteht eine hohe Standzeit, was sich in geringeren Stillstandszeiten und niedrigeren Stückkosten niederschlägt. Ideal für Lohnfertiger und Produktionsbetriebe mit Fokus auf Prozesssicherheit. Für produktive Zerspanung empfehlen wir die RCMT0803M0 T5115 von Tungaloy; technische Beratung und Bestellung über info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Leistungsmerkmale Artikelnummer: 6864714 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: RCMT0803M0 Fakten Plattendicke: 3,18 mm Plattengröße: 08 Freiwinkel: 7° Eckenradius: 0 Besonderheiten Material: Hartmetall Beschichtung: CVD (chemische Gasphasenabscheidung) Sorte: T5115 Plattenform: rund Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig Einsatz: Drehen Schneidstofftyp: CVD-beschichtetes Hartmetall FAQ Ist die Platte für Gusseisen geeignet? Die RCMT0803M0 T5115 Wendeplatte von Tungaloy wurde speziell als Universalsorte für Gusseisen entwickelt und bietet ausgewogenen Verschleißschutz und Schneidkantenstabilität; Artikelnummer 6864714. Welche Halter passen zur RCMT0803M0? Kompatibel sind ISO-konforme Halter, die die RCMT-Form, Plattendicke 3,18 mm und den Freiwinkel 7° unterstützen. Prüfung der Form-, Größen- und Toleranzangaben am Halter wird empfohlen. Handelt es sich um eine einseitige oder beidseitige Platte? Es handelt sich um eine einseitige Wendeplatte mit einseitigem Spanbrecher, ausgelegt auf stabile Spanbildung bei Gusseisen. Eignet sich die Platte für Innen- und Außenbearbeitung? Ja, die Platte ist für Außen- und Innendrehen geeignet; die Sorte T5115 und der Spanformer ermöglichen vielseitigen Einsatz bei unterschiedlichen Bearbeitungsparametern. Wie wähle ich den passenden Spanformer aus? Den Spanformer anhand Werkstoff, Bearbeitungsart und Maschinenvibration wählen; für Gusseisen ist der einseitige Spanbrecher der RCMT0803M0 meist die passende Wahl. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCMT 0803M0 T9215 Wendeplatten - Tungaloy
High wear resistance and predictable fracture behaviour deliver steady productivity for medium steel turning; paired with ISO conformity and a secure hole-and-countersink fastening, the insert ensures repeatable clamping and consistent surface finish — order the insert directly via Metav Werkzeuge or ask our consultants if needed. RCMT 0803M0 T9215 RCMT0803M0 — Tungaloy turning insert, CVD-coated carbide The RCMT0803M0 T9215 is an ISO-standard turning insert for external and internal turning, offering a one-sided chipbreaker and a secure hole-and-countersink mount for stable, repeatable clamping. ISO-standard round insert RCMT 0803M0 CVD-coated carbide grade T9215 Single-sided chipbreaker for stable cutting 7° relief, cylindrical hole with countersink Consistent productivity through advanced coating and grade selection The combination of a CVD-coated surface and a carbide substrate in grade T9215 is tuned for medium steel machining where a balance of wear resistance and toughness is required. The coating provides a hard, thermally stable layer that slows abrasive wear, while the substrate resists chipping under the stresses of continuous to slightly interrupted cuts. This translates into longer effective tool life, fewer insert changes and steadier cycle times on the shop floor. Practical benefits include more consistent batch quality and reduced downtime from insert replacement, supporting lean production goals. Secure clamping and ISO conformity for repeatable results Designed to the ISO insert family, the round format with a central hole and the specified countersink geometry (cylindrical hole plus one-sided countersink at 40°–60°) ensures secure engagement with matching holders. The specified 7° relief and a thickness of 3.18 mm contribute to precise seating and reduced vibration during turning, which improves surface finish and enhances dimensional repeatability. Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and thickness; using matched components avoids misalignment and maintains cutting stability across production runs. Practical machining guidance for robust performance The insert’s single-sided chipbreaker is suited to stable clamping and moderate chip loads, offering predictable chip control in standard external and internal turning tasks. Select an appropriate chipbreaker and insert grade matched to the workpiece material and the machine’s rigidity to exploit the grade’s strengths: higher cutting speeds and longer tool life under steady conditions. For partially interrupted cuts ensure secure clamping and, where possible, favour rigid setup and reduced overhang to protect the cutting edge and maintain consistent surface integrity. Why this grade and format delivers value in production Choosing the T9215 grade in this ISO-format insert focuses on process reliability: good wear resistance with maintained edge strength yields repeatable results in medium steel applications and supports higher productivity without sacrificing component quality. The round insert form factor and central-hole mounting simplify indexation and replacement, reducing handling time during tool changes. In combination, these features help to lower unit machining costs and to stabilise manufacturing flows in turning operations. Contact Metav Werkzeuge for tailored holder recommendations, assembly kits and application advice for the RCMT0803M0 T9215 Tungaloy insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific turning tasks Technical Data Article number: 6774009 Manufacturer SKU: TUN6774009 SKU: 6774009-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Thickness: 3.18 mm Size: 08 (ISO 0803M0) Relief angle: 7° Hole style: Cylindrical hole with one-sided countersink (40°–60°) Special features CVD-coated carbide (T9215) Round plate geometry, central hole for secure clamping Single-sided chipbreaker For turning: external and internal machining Compatible with standard ISO holders per form, clearance and tolerance FAQ What materials is this insert suited for? The RCMT0803M0 T9215 insert is specified for medium steel machining; the CVD coating and carbide substrate make the grade suitable for continuous to slightly interrupted turning of steel. How does the chipbreaker affect machining? A single-sided chipbreaker on this Tungaloy insert promotes stable chip control under steady clamping conditions, improving surface finish and reducing the risk of edge damage in standard turning applications. What ensures repeatable clamping with this insert? Repeatability is achieved through the round plate format with a central cylindrical hole and a 40°–60° countersink; combined with the 7° relief and correct holder selection, these features provide secure, consistent seating. Is this insert compatible with existing ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the RCMT0803M0 conforms to ISO norms and is designed to fit matching holders when these parameters align. Which cutting scenarios are recommended for this grade? The T9215 grade is intended as a first choice for medium steel where productivity and good wear resistance are required; it performs well in continuous operations and light interruptions when mounted in a rigid, correctly matched setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0803M0 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, robust CVD‑coated carbide performance and consistent chip control for reliable medium to heavy steel turning; order directly via Metav Werkzeuge or consult the technical team for application support. RCMT 0803M0 T9225 Turning insert — CVD‑coated carbide for medium to heavy steel turning (Tungaloy) The RCMT0803M0 T9225 is an ISO‑standard, round indexable insert for external and internal turning, designed to deliver reliable performance under varying engagement conditions and light interruptions. ISO form RCMT 0803M0, 7° clearance CVD‑coated carbide grade T9225 Designed for medium to heavy steel turning Cylindrical hole with single‑side countersink Reliable compatibility for secure clamping and predictable results The round ISO insert form ensures broad compatibility with standard external holders and boring bars; compatibility depends on form, clearance angle, tolerance class, fastening and plate thickness. The combination of round geometry and a 7° clearance supports steady seating and repeatable positioning, reducing setup variance and helping maintain consistent toolpath geometry. For production workflows this translates into predictable clamping behaviour and fewer interruptions during tool changes. Durable grade and coating for demanding steel applications The T9225 grade is a CVD‑coated carbide developed as a universal, robust option for the medium to heavy machining of steel, offering increased toughness where interrupted cuts or varying engagement occur. The coating improves wear resistance while the substrate retains edge integrity; this balance of hardness and fracture resistance supports longer life under heavy cut depths. As a result, machining cycles become more productive, with the insert tolerating fluctuating loads while preserving surface quality. Chip control and geometry that aid process stability Equipped with a single‑sided chipbreaker, the insert promotes effective chip formation and evacuation in common steel operations. The 3.18 mm plate thickness and the round 08 size provide a stiff cutting edge that resists deflection, while the hole with a cylindrical bore and one‑sided countersink (40°–60°) enables secure fastening and straightforward replacement of inserts in the tooling system. Together, these features reduce the risk of unstable chips and support a consistent surface finish on turned components. Practical selection and application guidance When selecting an insert grade and chipbreaker, match T9225 and the single‑sided chipformer to the workpiece material and feed range for optimal results; choose a more tolerant grade where heavy interruptions or variable stability are expected. For customers seeking setup advice or feed/speed recommendations, specialist consultation can clarify holder compatibility and cutting data to maximise tool life and process efficiency. The combination of ISO standardisation and robust grade design makes this insert suitable for batch production as well as mixed‑operation turning. For high‑reliability steel turning applications, request the RCMT 0803M0 T9225 from Metav Werkzeuge or contact Metav Werkzeuge for tailored application advice and delivery coordination (Metav Werkzeuge). Technical data Article number: 6781084 Manufacturer SKU: TUN6781084 SKU: 6781084-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: RCMT0803M0 Facts Plate size: 08 Plate thickness: 3.18 mm Clearance angle: 7° Corner radius: 0 Hole style: cylindrical hole + one‑sided countersink (40°–60°) Special features Material: carbide Coating: CVD‑coated Grade: T9225 Chipbreaker: single‑sided Application: Turning (external and internal) ISO‑standard insert, round form FAQ What materials is this insert best suited to machine? The RCMT0803M0 T9225 insert is optimised for medium to heavy steel machining; the CVD‑coated carbide and robust grade give improved toughness for interrupted cuts. How does the chipbreaker influence performance? The single‑sided chipbreaker on the RCMT0803M0 promotes controlled chip formation and evacuation, improving process stability and surface finish during turning operations. Which holders are compatible with this insert? Compatibility is determined by insert form, clearance, tolerance class, fastening and thickness; the RCMT form fits ISO‑compatible round insert holders and boring bars when those parameters match. What are the key dimensional data for the insert? Key dimensions include a plate size of 08, thickness 3.18 mm, clearance 7° and a corner radius of 0, with a cylindrical hole and single‑sided countersink. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 0803M0 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of precise ISO compatibility, a sharp uncoated carbide grade and a secure, countersunk fixing for consistent turning results. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. RCMT 0803M0 TH10 turning insert for turning, round ISO insert by Tungaloy — uncoated cemented carbide, 7° clearance RCMT 0803M0 TH10 is a compact ISO‑standard turning insert intended for general turning tasks where low cutting forces and clean surface finishes are required ISO‑standard turning insert, round shape Uncoated carbide grade TH10 for non‑ferrous Single‑sided chipbreaker for clean surfaces 7° clearance angle; 3.18 mm thickness Countersunk central hole for secure clamping High‑performance cutting with low cutting forces The TH10 grade is an uncoated cemented carbide developed for sharpness and controlled cutting when machining non‑ferrous materials and similar applications. Its micro‑geometry supports low cutting forces, which reduces spindle load and helps maintain tool stability in lighter setups. As a result of the sharp edge preparation and single‑sided chipbreaker, the insert generates clean surfaces with reduced burr formation, making it suitable for finishing passes where surface quality is a priority. The grade’s universality provides flexibility across a range of materials commonly encountered in production environments. Secure clamping and ISO compatibility for repeatable set‑ups The round indexable design with a cylindrical hole and one‑sided countersink (40°–60°) ensures reliable clamping in compatible holders; the central countersink improves positional repeatability and reduces the chance of insert movement under load. With a 7° relief angle and a plate thickness of 3.18 mm, the geometry is balanced between edge strength and accessibility for tight radii. The ISO designation and dimensions match established holder systems, enabling straightforward replacement and minimising downtime during tool changes. This results in consistent set‑ups and predictable machining outcomes. Productivity gains through chip control and handling The single‑sided chipbreaker is tuned to produce short, manageable chips in many turning operations, aiding chip evacuation and reducing rework caused by entangling swarf. The round plate form with an edge radius of 0 mm provides a sharp contact line for finishing cuts, while the uncoated substrate supports low friction when machining softer, non‑ferrous alloys. For workshops prioritising throughput, this insert offers an economical option that pairs well with stable toolholders and appropriate cutting parameters, enabling sustained process reliability without unnecessary complexity. Contact Metav Werkzeuge for tailored cutting data, availability and to secure the RCMT 0803M0 TH10 insert for immediate delivery or technical consultation Technical data Article number: 6805868 Manufacturer SKU: TUN6805868 SKU: 6805868-Tungaloy Model series: ISO turning inserts Designation: RCMT0803M0 Numbers / Core technical data Plate size: 08 Plate thickness: 3.18 mm Clearance angle: 7° Corner radius: 0 mm Countersink angle: 40°–60° Designs / Special features Material: cemented carbide Grade: TH10 (uncoated) Chipbreaker: single‑sided Plate form: round Central hole: cylindrical with one‑sided countersink Intended application: turning FAQ What materials is this insert intended for? The RCMT 0803M0 TH10 insert is optimised for non‑ferrous materials and similar applications where a sharp, uncoated cemented carbide edge supports low cutting forces and good surface finish. How does the central countersink affect clamping? The cylindrical hole with a one‑sided countersink (40°–60°) enhances positional stability in ISO holders and reduces the risk of insert movement during turning operations. Is the TH10 grade coated or uncoated? The TH10 grade is uncoated cemented carbide, selected to deliver a sharp cutting edge and controlled chip formation for finishing and medium‑duty turning. Can this insert be used for roughing operations? While the RCMT 0803M0 is optimised for clean cuts and finishing passes, it can be used in more productive operations if the setup provides sufficient rigidity; however, tougher, coated grades are generally preferred for heavy roughing. Which holder characteristics ensure compatibility with this ISO insert? Compatibility is determined by insert form, clearance angle, tolerance class, attachment style, size and thickness; matching an ISO‑compliant holder with the corresponding RCMT pocket and clamping is essential. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com