RCGT 1003M0 KS05F Wendeplatten - Tungaloy
Combining KS05F wear resistance with an ISO‑compliant RCGT geometry and a secure cylindrical hole with countersink, this insert provides stable cutting performance for both external and internal turning. Order directly via Metav Werkzeuge or consult our specialists for optimal grade and chipbreaker selection. RCGT1003M0-AL KS05F Tungaloy indexable turning insert — ISO, 3.18 mm, 7° clearance RCGT1003M0-AL KS05F Tungaloy is an ISO‑standard indexable insert engineered for versatile turning applications, offering a balance of wear resistance and edge stability across a broad material range ISO-compliant turning insert KS05F Tungaloy wear-resistant grade Cylindrical hole with countersink 3.18 mm plate thickness Stable cutting performance through a wear-resistant grade The insert is manufactured from cemented carbide and specified with the KS05F grade, providing a deliberate balance between hardness and toughness. This composition supports prolonged tool life under varying cutting conditions, delivering consistent dimensional control during repetitive operations. The AL chipbreaker geometry is matched to soft to medium materials and helps to shape chips reliably, reducing risk of built-up edge and minimising cycle disruptions. As a result, process efficiency is improved and tool change frequency can be reduced. Secure seating and compatibility for reliable machining Compatibility with the clamping system is determined by form, clearance angle (7°), tolerance class, fastening method, size and thickness; the insert is round with a 3.18 mm plate thickness and a 10 mm nominal size. A cylindrical hole with a one‑sided countersink (40°–60°) secures the insert centrally and ensures repeatable seating in ISO‑specified toolholders. Clear mechanical interfacing reduces vibration and supports surface finish stability, so holders and toolposts perform predictably across batch runs. Application advantages: external and internal turning with controlled chips Designed for both external and internal turning, this indexable geometry allows selection of a suitable chipbreaker and the KS05F grade according to workpiece material and process rigidity. The combination of grade and chipbreaker produces manageable chip forms, which contributes to safer machine operation and easier swarf handling. The round plate form with zero corner radius supports low‑radial engagement strategies and can be used where a small effective nose radius or free‑cutting action is required. For technical selection, volume enquiries or to order Tungaloy inserts such as the RCGT1003M0‑AL KS05F, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6822303 Manufacturer SKU: TUN6822303 Model series: ISO-Drehwendeschneidplatten Label: RCGT1003M0-AL KS05F Tungaloy-Wendeplatte Numbers / core technical data Insert designation: RCGT1003M0-AL ISO code: 1003M0 Size: 10 Thickness: 3.18 mm Clearance angle: 7° Corner radius: 0 Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Designs / special features Material: Hartmetall (cemented carbide) Grade: KS05F (Tungaloy) Chipbreaker: AL Plate form: round Application: Drehen (external and internal turning) Compatible in ISO holders by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The KS05F grade is formulated for broad material coverage; the RCGT1003M0‑AL insert suits soft to medium materials when used with the AL chipbreaker and can be matched to different steels and alloys through grade selection. How is the insert mounted in a toolholder? Mounting relies on the cylindrical hole with a one‑sided countersink (40°–60°); the geometry and 7° clearance ensure secure seating in ISO‑compatible external holders and boring bars. What are the key dimensions to check for holder compatibility? Check the ISO code (1003M0), nominal size (10), thickness (3.18 mm) and the clearance angle (7°) to ensure correct fit in the selected holder. Does the insert require a specific chipbreaker? This item uses the AL chipbreaker; matching chipbreaker and grade to the workpiece material and machining parameters ensures controlled chip formation and stable cutting. Is the RCGT1003M0‑AL suitable for finishing and profiling? Yes; the round plate form and zero corner radius allow low radial engagement and predictable contact conditions, which are helpful for certain finishing and profiling strategies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCGX 090700 TS200 Wendeplatten - Tungaloy
Reliable production is achieved by combining ISO conformity with the TS200 wear‑resistant grade and a robust cemented‑carbide body of 7.94 mm thickness; this creates consistent cutting performance and edge stability. Order the RCGX090700‑T1 insert directly via Metav Werkzeuge or consult our specialists for application advice. RCGX090700-T1 TS200 indexable insert for turning — Tungaloy RCGX090700-T1 TS200 is an ISO‑standard round turning insert designed for external and internal turning operations with a T1 chipbreaker ISO‑standard round insert, 09 size Grade TS200 for wear resistance 7° clearance for general turning Cemented carbide body, 7.94 mm thick Reliable cutting performance for stable turning cycles The RCGX090700‑T1 unit combines ISO geometry with the TS200 grade to deliver predictable wear behaviour and edge retention in turning tasks. The use of cemented carbide provides hardness and thermal stability, while the T1 chipbreaker assists controlled chip formation under typical cutting conditions. These attributes reduce unexpected regrinds and support consistent component tolerances, making the insert suitable where repeatability and surface quality matter. Rapid tool change and system compatibility to save production time Designed as part of a modular system, the insert is intended to work with matching external holders or boring bars and requires the corresponding shim/clamp set and replacement screws. The compatibility is defined by insert form, 7° clearance, tolerance class, fixation method, size and thickness; this enables straightforward integration into existing toolholders. Clear system alignment and standardised clamping minimise downtime during insert replacement and simplify inventory management in the toolroom. Application scope and selection guidance for efficient machining This insert is aimed at turning applications, both external and internal, where a round 09 form is advantageous for entering and profiling grooves. The TS200 grade balances wear resistance and toughness, so choosing the appropriate variant and chipbreaker depends on workpiece material, cutting parameters and machine stability. For best results, match the insert to the holder geometry and select cutting data that reflect rigidity and feed requirements. For reliable, high‑productivity turning with Tungaloy’s TS200 grade, contact Metav Werkzeuge for tailored selection support and to secure the correct insert, holders and spare parts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6148333 SKU: 6148333-Tungaloy Manufacturer SKU: TUN6148333 Model series: ISO‑Drehwendeschneidplatten Name: RCGX090700-T1 TS200 Tungaloy‑Wendeplatte Facts Size: 09 Shape: round Thickness: 7.94 mm Clearance angle: 7° ISO code: 090700 Chipbreaker: T1 Hole style: special Special features Grade/coating: TS200 Carbide type: Tungaloy grade Material: cemented carbide Application: turning (external and internal) System components: matching external holder or boring bar; shim/clamp set; spare screws FAQ What materials is this insert suitable for? The RCGX090700‑T1 TS200 Tungaloy insert is intended for turning applications; the TS200 grade offers a balance of wear resistance and edge stability, and the chipbreaker selection should be matched to the specific workpiece material and machining conditions. What machining tasks does the T1 chipbreaker support? The T1 chipbreaker is specified for controlled chip formation during general turning operations; on the RCGX090700‑T1 insert it helps maintain stable cutting forces and predictable chip flow when paired with an appropriate holder and cutting data. How is compatibility with toolholders ensured? Compatibility depends on insert form, the 7° clearance, tolerance class, fixation method, size and thickness; verify these parameters against the chosen external holder or boring bar before assembly. Can this insert be used for internal turning operations? Yes — the round 09 form and ISO geometry make the insert suitable for both external and internal turning, provided the holder and machine setup deliver the required rigidity. Which spare parts are recommended to keep in stock? Keep matching clamping sets, underlays/shims and replacement screws, plus a small stock of the RCGX090700‑T1 inserts (SKU 6148333‑Tungaloy) to reduce maintenance lead times and maintain continuous production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCGX 090700 TS200 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, stable cutting-edge stability and straightforward holder compatibility for reliable turning performance. Order this insert directly via Metav Werkzeuge or consult the team for application-specific configuration. RCGX090700-T1 — RCGX 090700 TS200 ISO turning indexable insert (round), 7° clearance — Tungaloy The RCGX090700-T1 TS200 is an ISO-standard round indexable insert designed for precision external and internal turning applications, combining a carbide substrate with a TS200 cutting grade for balanced wear resistance and edge stability. ISO-standard round geometry Carbide substrate with TS200 grade 7° relief angle for universal turning Compatible with ISO turning holders Consistent cutting performance for turning operations The RCGX090700-T1 insert is engineered to deliver consistent material removal during both roughing and finishing passes. The combination of a carbide substrate and the TS200 grade provides a balance between wear resistance and edge toughness, which reduces unexpected tool changes and supports predictable cycle times. In production contexts where reproducible part quality and tool life are priorities, the insert’s geometry and grade help to lower process variation and maintain surface integrity on successive components. Practical compatibility and mounting explained Compatibility with a toolholder depends on geometry, relief angle, tolerance class, fastening and thickness; the round shape and ISO designation simplify selection for many standard holders. The insert’s 7° relief angle and 7.94 mm thickness suit common external holders and boring bars, while the special hole and clamping interface require matching shims or clamping sets. A complete system typically comprises the indexable insert, a matching external holder or boring bar, a shim/clamp set and the relevant replacement screws to ensure secure seating and repeatable positioning. Durability and process stability in everyday use By focusing on edge stability rather than extreme toughness alone, the TS200 grade contributes to controlled wear patterns and extended productive life under standard turning conditions. The chipbreaker T1 geometry supports chip control adapted to the insert size and application, reducing built-up edge and improving surface finish. For manufacturers aiming to reduce downtime, this combination provides measurable benefits in tool-change intervals and consistent component tolerances. Application advice and selection guidance Intended for external and internal turning, the insert performs well across a range of turning tasks when the correct chipbreaker and grade are selected according to workpiece material and machining stability. When setting cutting parameters, prioritise stable clamping and appropriate feed rates to exploit the insert’s balance of wear resistance and edge support. For bespoke applications or uncertain material mixes, consult the technical advisers to align holder choice, clamping hardware and cutting data with production requirements. For tailored advice on compatibility, availability and optimal setup of this Tungaloy insert contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — expert support and fast supply options are available through Metav Werkzeuge Technical data Article number: 6182033 SKU: 6182033-Tungaloy Model series: ISO indexable turning inserts Material: Carbide Designation: RCGX090700-T1 Manufacturer: Tungaloy Key measurements Size designation: 09 Thickness: 7.94 mm Relief angle: 7° ISO code: 090700 Hole: Special Shape: round Features / Application Grade: TS200 Chipbreaker: T1 Intended application: Turning (external and internal) System components: matching holder, shim/clamping set, replacement screws Compatibility note: determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The RCGX090700-T1 TS200 insert is designed for general turning tasks; the TS200 grade offers a balance of wear resistance and toughness suitable for a wide range of materials—select the chipbreaker and cutting data according to the specific workpiece. How is the insert mounted in a holder? Mount the RCGX090700-T1 into an ISO-compatible holder that matches the round 09 size, 7.94 mm thickness and the special hole/clamping interface; secure with the appropriate shim/clamp set and replacement screws to ensure repeatable positioning. What does the TS200 designation mean for performance? TS200 denotes a Tungaloy cutting grade formulated to combine wear resistance with edge stability, helping to extend tool life while maintaining consistent surface finish and dimensional control. Is the chipbreaker fixed for specific feeds and depths of cut? The chipbreaker T1 is optimised for a range of turning conditions; choose feed and depth values that align with the workpiece material, machine stability and desired surface finish for best results with this insert. Which components are required to form a complete tooling system? A complete system comprises the ISO indexable insert, a compatible external holder or boring bar, an underlay/shim and a clamping set plus replacement screws; correct matching is essential for secure clamping and consistent results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCGX 090700 TS300 Wendeplatten - Tungaloy
Take advantage of the ISO‑standard geometry, TS300 Tungaloy grade and the proven chipbreaker T1 for reliable performance in both external and internal turning; order the insert directly via Metav Werkzeuge or consult our technical advisors for holder compatibility and application advice. RCGX 090700 TS300 Turning insert (ISO turning insert) – Tungaloy The RCGX090700-T1 TS300 Tungaloy insert is an ISO‑standard indexable turning insert engineered for general turning operations, offering a balanced combination of wear resistance and edge stability for demanding machining tasks. ISO‑standard geometry TS300 Tungaloy grade 7° relief for stable cutting Round 09 format, 7.94 mm thickness Maximise process reliability with ISO conformity and TS300 grade The insert is manufactured to ISO‑standard dimensions and tolerances, ensuring straightforward integration into existing toolholders and clamping systems. Built from cemented carbide, the grade TS300 combines wear resistance with sufficient toughness so that the cutting edge maintains integrity under moderate interrupted cuts. This technical balance reduces unexpected tool changes and supports a steady production flow, making it a practical choice for shops that demand consistent component quality. Consistent chip control and edge stability for predictable results Equipped with the chipbreaker T1, the round 09 insert shape helps to form short, controllable chips during typical turning operations. The 7° relief angle reduces rubbing at the flank face, lowering heat generation and improving surface finish. These attributes translate into fewer rework cycles and a higher first‑pass yield when turning a range of steels and common engineering materials, provided an appropriate insert geometry and cutting data are selected. Simple selection and integration reduce downtime Compatibility with holders is determined by form, relief angle, tolerance class, clamping and thickness; the insert’s ISO‑conforming form and the clear specification of size and thickness (7.94 mm) simplify selection of a matching external holder or boring bar. Spare mounting screws and correct clamping elements complete a robust system build. Where uncertainty exists regarding the correct holder or clamping set, the component’s clear specifications facilitate a rapid consultation and minimise potential setup errors. Contact Metav Werkzeuge for availability, tailored advice on holder compatibility and application recommendations for this Tungaloy TS300 turning insert Technical data Article number: 6151102 Manufacturer SKU: TUN6151102 Model series: ISO turning indexable inserts Designation: RCGX090700-T1 Facts Relief angle: 7° Thickness: 7.94 mm Size/format: 09 (round) ISO code: 090700 Special features Cemented carbide material TS300 Tungaloy grade Chipbreaker T1 Round insert geometry Special hole style Intended use: turning (external and internal) Compatibility depends on form, relief angle, tolerance, clamping, size and thickness FAQ What materials is this insert suitable for? The RCGX090700‑T1 TS300 insert is designed for turning and provides a balanced performance on a broad range of common engineering materials when the appropriate grade and chipbreaker are selected. How does the TS300 grade affect tool life? The TS300 Tungaloy grade offers a combination of wear resistance and edge stability that extends usable life compared with less wear‑resistant grades, while maintaining reliable cutting behaviour under typical turning conditions. Which holders are compatible with this ISO insert? Compatibility is determined by holder form, relief angle, tolerance class, clamping method, size and thickness; match these parameters to the RCGX090700‑T1 specification for correct integration. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCGX 090700 TS300 Wendeplatten - Tungaloy
The combination of TS300 carbide grade and ISO-standard geometry ensures predictable wear behaviour and stable cutting edges for sustained production runs. With a 7° clearance angle and a plate thickness of 7.94 mm, the insert integrates reliably into existing ISO turning systems and supports consistent chip control with the T1 chipbreaker. Order the RCGX090700-T1 TS300 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. RCGX 090700 TS300 – RCGX090700-T1 indexable insert for turning by Tungaloy The RCGX090700-T1 TS300 Tungaloy indexable insert is an ISO-standard turning insert designed for external and internal turning, combining a wear-resistant carbide grade with a T1 chipbreaker for stable machining. ISO turning insert RCGX090700-T1 by Tungaloy TS300 grade for wear resistance and edge stability Suitable for external and internal turning operations 7° clearance angle; 7.94 mm plate thickness Reliable integration into ISO tool systems for rapid set-up The insert follows the ISO designation and dimensions, so compatibility with a holder is determined by seat form, clearance angle, tolerance class, fastening type, nominal size and thickness. This standardised approach reduces fixture decisions and shortens changeover times in production environments. Thanks to the carbide substrate and the TS300 development, the component delivers consistent dimensional repeatability when paired with compatible external holders or boring bars, helping maintain process stability across shifts. TS300 grade: extended lifetime and stable cutting edges The TS300 grade from Tungaloy is formulated to balance wear resistance and toughness, giving a reliable edge for medium to high cutting demands. The grade supports predictable flank wear and resists chipping on interrupted cuts, which translates into fewer index changes and lower tooling consumption per workpiece. Combined with the T1 chipbreaker, the carbide composition helps maintain surface integrity and reduces the frequency of tool interventions, supporting efficient production throughput. Controlled chip formation for improved surface finish Chip control is central to uninterrupted turning operations. The T1 chipbreaker geometry guides swarf away from the cutting zone, reducing re-cutting and the risk of surface blemishes. For external and internal turning tasks, this control contributes directly to a superior surface finish and reduced secondary operations. The insert’s round form and specific chipbreaker pairing are particularly useful where stable, short chips are required to protect the part and the machine. Practical mounting and system requirements for workshop use Mounting follows the ISO system concept: the indexable insert requires a matching seat in an external holder or boring bar, plus an appropriate shim/clamping set and replacement screws. Key attributes for ordering and stock planning include the ISO code 090700, round plate shape, 7.94 mm thickness and a 7° clearance angle. The hole and hole style are designated as special, so confirm the holder’s fastening method before assembly. These clear technical markers simplify procurement and spare-part management in busy production settings. Contact Metav Werkzeuge to discuss integrating the RCGX090700-T1 TS300 insert into existing tool holders or to request a cutting application recommendation; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6182034 Manufacturer SKU: TUN6182034 SKU: 6182034-Tungaloy ISO designation: RCGX090700-T1 Facts Plate size: 09 Thickness: 7.94 mm Clearance angle: 7° ISO code: 090700 Chipbreaker: T1 Special features Material: Carbide Grade: TS300 (Tungaloy) Shape: round Hole style: special Application: Turning Model series: ISO turning indexable inserts FAQ What does the ISO code 090700 mean for tooling compatibility? The ISO code 090700 identifies the insert geometry and size family; the RCGX090700-T1 TS300 insert must be used with holders and clamping systems that accept the ISO seat, matching form, tolerance and thickness for safe and repeatable mounting. What advantages does the TS300 grade provide? The TS300 carbide grade offers a balance of wear resistance and toughness, providing stable cutting edges and extended service life under typical turning conditions, which reduces index changes and supports continuous machining. For which operations is this insert intended? This indexable insert is designed for both external and internal turning operations; the combination of round geometry and the T1 chipbreaker enables controlled chips and a good surface finish in a range of turning tasks. How should the insert be mounted in the tool system? Mounting requires a compatible ISO holder or boring bar, a matching shim/clamping set and the correct replacement screws; compatibility depends on seat form, clearance angle, tolerance class, fastening method, size and thickness. Is the hole style specialised and does it affect replacement parts? Yes — the hole and hole style are listed as special, so ensure that replacement screws and clamping components match the designated fastening system for reliable clamping and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCGX 120700 TS200 Wendeplatten - Tungaloy
Take advantage of the combination of TS200 wear resistance, cemented carbide robustness and ISO-standard compatibility for dependable turning performance. The round geometry with a 7° clearance and a chipbreaker T1 delivers stable chip control and extended edge life; order the RCGX120700-T1 insert directly via Metav Werkzeuge or ask our consultants if needed. RCGX 120700 TS200 — Indexable turning insert, round form, 7° clearance (Tungaloy) The RCGX120700-T1 TS200 Tungaloy insert is an ISO-standard indexable turning insert designed for external and internal turning, combining edge stability and controlled chip formation in a compact round geometry. Round geometry with 7° clearance TS200 grade for wear resistance Special hole for secure clamping ISO-standard compatibility with holders Enhanced durability and cutting reliability The combination of the TS200 grade and cemented carbide substrate provides a balanced mix of wear resistance and toughness, suited for a wide range of turning tasks. The manufactured grade supports consistent edge stability under varying cutting conditions, which reduces the frequency of index changes and contributes to predictable tool life. Using a chipbreaker T1 promotes reliable chip control in many steels and alloyed materials, reducing scrap risk and keeping cycle times stable while improving workplace safety. System compatibility and straightforward set-up Designed as an ISO-standard turning insert, the round geometry simplifies orientation requirements and fits a broad selection of ISO holders provided the form, clearance angle, tolerance class, fastening and thickness are matched. Key measurable data — Ø12 mm, 7.94 mm thickness and a 7° clearance angle — make holder selection and clamping checks straightforward. The insert’s special hole style ensures secure fastening in the clamping set-up; pairing the insert with the correct holder and clamping kit helps maintain repeatable concentricity and reduces set-up time at the machine. Consistent surface quality and productivity gains The insert’s geometry and material selection are optimised for stable cutting action, which supports a more consistent surface finish and reduces rework. In practice, fewer interruptions for tool changes and better chip flow with the chipbreaker T1 lead to higher effective spindle utilisation and improved process reliability. For workshops aiming to balance operating costs and machining quality, the indexable round insert is a pragmatic choice that contributes to steady production outputs and predictable maintenance intervals. For technical advice or to order Tungaloy turning inserts including the RCGX120700-T1, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — assistance is available for holder compatibility and cutting data optimisation Technical data Article number: 6182035 SKU: 6182035-Tungaloy Manufacturer SKU: TUN6182035 ISO designation: RCGX120700-T1 Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Size: 12 mm Thickness: 7.94 mm Clearance angle: 7° Chipbreaker: T1 ISO code: 120700 Design & special features Material: cemented carbide Grade: TS200 Form: round Hole style: special Intended application: turning (external and internal) Compatibility: ISO-standard turning holders FAQ What materials is the RCGX120700-T1 suitable for? The RCGX120700-T1 TS200 insert is designed for turning a wide range of materials; the TS200 grade balances wear resistance and toughness for many steels and alloyed materials. How does the chipbreaker T1 affect machining? The chipbreaker T1 on the RCGX120700-T1 promotes controlled chip formation, improving evacuation and reducing the risk of built-up edge during continuous turning operations. Which holders are compatible with this insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method and size; the RCGX120700-T1 fits holders designed for ISO-standard round inserts with matching dimensions. What are the key dimensions to check when replacing the insert? Check the insert diameter (12 mm), thickness (7.94 mm) and the clearance angle (7°) to ensure correct seating and clamping in the holder for the RCGX120700-T1. Is the RCGX120700-T1 suitable for internal turning? Yes, the round form and the TS200 grade make the RCGX120700-T1 appropriate for both external and internal turning applications when used with a suitable holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCGX 120700 TS200 Wendeplatten - Tungaloy
Benefit from the combination of TS200 wear resistance, a precise 7° clearance and stable chip control for efficient turning cycles. Optimised edge stability and the ISO format ensure predictable tool life and machining quality. Order directly via Metav Werkzeuge or consult their technical advisors for application-specific guidance. RCGX120700-T1 TS200 RCGX turning insert by Tungaloy (ISO round, 12 mm) A RCGX120700-T1 TS200 ISO-format turning insert designed for general external and internal turning, combining a Tungaloy carbide grade with a T1 chipbreaker for predictable chip formation. ISO round insert, 12 mm diameter TS200 grade for wear resistance 7° clearance for secure edge contact T1 chipbreaker for controlled chips Consistent performance from a wear-resistant grade The TS200 cutting grade is engineered to balance wear resistance and toughness for turning applications. Manufactured in carbide, the indexable plate delivers consistent edge life under varying cutting conditions, reducing unscheduled tool changes. The combination of grade and geometry supports steady metal removal rates and contributes directly to lower machining costs per part by extending service intervals and stabilising surface finish. Precise geometry for stable chip control and accuracy With a dedicated T1 chipbreaker and a 7° clearance angle, the insert produces controlled chips and maintains a secure cutting edge contact during both roughing and finishing passes. The ISO-format round plate and its thickness of 7.94 mm provide mechanical rigidity that minimises vibration and improves dimensional repeatability. Clear explanation: a chipbreaker shapes and breaks material flow, while the clearance angle prevents rubbing and reduces tool heat—both factors increase process reliability. Compatibility and selection guidance for reliable integration Compatibility with a tool holder depends on form, clearance angle, tolerance class, fixing method, size and thickness; these parameters determine correct seating and clamping. Select the T1 chipbreaker and TS200 grade according to workpiece material, machining strategy and machine stability. For general turning of steels and alloyed materials, the combination of this geometry and grade offers a pragmatic balance between tool life and productivity. Technical enquiries and detailed matching to holders or specific materials are available on request. Contact Metav Werkzeuge today to confirm suitability for the intended turning task and to place an order through the authorised channel, or request personalised advice from their technical consultants Technical data Article number: 6182038 Manufacturer SKU: TUN6182038 SKU: 6182038-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: RCGX120700-T1 Facts Size: 12 mm Thickness: 7.94 mm Clearance angle: 7° ISO code: 120700 Special features Material: carbide Grade: TS200 (Tungaloy) Chipbreaker: T1 Shape: round Hole: Sonder Application: Turning FAQ What materials is this insert suitable for? The TS200 grade and carbide substrate are intended for turning applications; the RCGX120700-T1 insert is suitable for a broad range of steels and alloyed materials where wear resistance and edge stability are required. How does the T1 chipbreaker affect machining? A T1 chipbreaker on the RCGX insert controls chip formation to improve evacuation and reduce the risk of tangling, supporting consistent surface finishes and safer operations. What determines compatibility with a holder? Compatibility is governed by form, clearance angle, tolerance class, fixing method, size and thickness; the RCGX geometry must match the holder’s specifications for secure clamping. Is the insert suitable for internal and external turning? Yes, the ISO-format round plate is designed for both external and internal turning tasks, provided the selected holder and setup accommodate the plate dimensions and clearance. Which benefit should be prioritised when choosing TS200? Prioritise wear resistance and edge stability for sustained turning performance; TS200 offers a practical compromise between hardness and toughness for productive machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCGX 120700 TS300 Wendeplatten - Tungaloy
Benefit from the combination of the TS300 wear-resistant grade and the proven T1 chipbreaker for consistent chip control and stable cutting edges; reliable compatibility with standard ISO holders promotes predictable tool changeovers. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. RCGX 120700 TS300 — Turning insert (T1 chipbreaker) by Tungaloy RCGX120700-T1 TS300 is an ISO-standard turning insert designed for external and internal turning in precision metalcutting applications ISO turning insert RCGX 120700 format TS300 grade for enhanced wear resistance T1 chipbreaker for controlled chip formation Round 12 mm plate, 7.94 mm thickness Consistent cutting performance for turning operations The insert delivers a balanced performance tailored to conventional and demanding turning tasks. The combination of the TS300 carbide grade and the T1 chipbreaker provides improved wear resistance and steady edge stability, reducing unscheduled tool changes. Explained simply, the grade blends hardness for abrasion resistance with sufficient toughness to avoid premature chipping, which benefits shops requiring reproducible surface quality and longer tool life. Better chip control and surface finish through geometry A round plate with a dedicated chip-control geometry ensures reliable chip formation across varying depths of cut. The T1 chipbreaker promotes short, segmented chips during interrupted cuts and continuous chips at smoother feeds, reducing the risk of entanglement and improving swarf evacuation. For operators less familiar with chipformers: this means fewer machining interruptions and cleaner processes on the shop floor, with a direct positive effect on cycle time and workplace safety. Straightforward integration into existing tool systems Compatibility with holders is determined by shape, clearance angle, tolerance class, fixing method, size and thickness — parameters that this insert follows as per ISO conventions. The round geometry and the ISO designation facilitate selection of a suitable outer holder or boring bar. Where quick retrofits are required, the standardised form and the clearly defined mounting features simplify inventory management and lower tooling logistics complexity. Material and grade advantages for productive machining Manufactured from high-quality cemented carbide, the grade TS300 from Tungaloy is optimised for a wide range of steels and general workshop applications. The insert’s construction aims for a balanced compromise between long life and predictable wear progression; this supports higher productivity by extending intervals between indexings and replacements. For precision tasks, stable cutting edges translate into consistent part dimensions and reduced rework. Contact Metav Werkzeuge for tailored application advice and to request the Tungaloy RCGX120700-T1 TS300 insert; technical consultation is available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6182039 Manufacturer SKU: TUN6182039 SKU: 6182039-Tungaloy Article name: RCGX120700-T1 TS300 Tungaloy insert Model series: ISO turning inserts Facts Plate thickness: 7.94 mm Plate size: 12 mm Clearance angle: 7° ISO designation: 120700 Chipbreaker: T1 Special features Material: cemented carbide Grade: TS300 (Tungaloy) Round plate geometry Special bore / special bore style Suitable for external and internal turning Compatibility determined by shape, clearance angle, tolerance class, fixing method, size and thickness System components: ISO insert, matching outer holder or boring bar, support/clamping set and replacement screws FAQ What materials is this insert suitable for? The RCGX120700-T1 TS300 insert is designed primarily for steel and common workshop materials; the TS300 grade offers broad applicability and stable performance in a variety of turning tasks. How does the T1 chipbreaker influence machining? The T1 chipbreaker on this Tungaloy insert promotes controlled chip formation, improving swarf evacuation and reducing interruptions during both continuous and interrupted cuts. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; the insert follows ISO conventions to facilitate selection of suitable outer holders or boring bars. What are the key dimensions to check when replacing an insert? Verify plate size (12 mm), plate thickness (7.94 mm), clearance angle (7°) and ISO designation (120700) to ensure correct fit and secure clamping. Is the insert supplied with screws or clamping parts? The article is an ISO insert; the system typically comprises the insert, a matching outer holder or boring bar, support/clamping set and replacement screws — confirm scope of delivery when ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCGX 120700 TS300 Wendeplatten - Tungaloy
Combining the TS300 wear-resistant grade with an ISO‑compliant geometry yields consistent cutting performance and predictable tool life for turning operations; the round 12 mm form and 7° clearance support secure seating and controlled chip flow. Order the RCGX120700-T1 directly via Metav Werkzeuge or ask our consultants if needed. RCGX120700 TS300 Turning Insert — Tungaloy The RCGX120700-T1 is an ISO‑standard turning indexable insert designed for external and internal turning, offering a TS300 carbide grade and a T1 chipbreaker for controlled material removal. ISO-standard turning insert TS300 grade Round 12 mm insert, 7.94 mm thickness Tungaloy carbide for wear resistance Stable cutting performance for high‑throughput turning The RCGX120700‑T1 is engineered to deliver repeatable results in production environments where stability matters. The insert’s TS300 grade combines wear resistance with sufficient toughness to reduce edge chipping, which means longer intervals between indexings and less machine downtime. With an ISO‑compliant geometry, the component ensures predictable interaction with compatible toolholders; this predictability translates into consistent surface finish and dimensional accuracy for serial turning work. Emphasising measurable outcomes, the design focuses on process reliability and throughput rather than speculative claims. Simple mounting and predictable holder compatibility Compatibility of the insert depends on the insert form, 7° clearance, tolerance class, fastening method, size and thickness. The round profile and the specified dimensions (12 mm diameter, 7.94 mm thickness) let engineers verify holder fit quickly and avoid costly trials. The special hole style requires the corresponding clamping system; once the correct seat and clamp are selected, repeat mounting is fast and stable. Explaining the technical terms: the clearance angle prevents rubbing on the workpiece, while the chipbreaker geometry (T1) shapes chips to reduce entanglement and heat buildup — both contributing to improved cycle stability. Material choice and chip control explained Made from carbide and supplied in Tungaloy’s TS300 grade, the insert focuses on balanced performance: wear resistance for extended life and edge stability for accuracy. The T1 chipbreaker is matched to conventional turning tasks and aids controlled fragmentation on a wide range of steels and common alloys. For users less familiar with insert grades, TS300 should be read as a versatile cutting material optimised for turning: it does not represent a single surface coating but a grade selection that complements the insert geometry to achieve longer tool life and reliable results under typical cutting conditions. For secure supply and application advice for the Tungaloy RCGX120700‑T1 TS300 turning insert, contact Metav Werkzeuge — order via Metav Werkzeuge or request technical consultation from our advisors at Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) Technical Data Article number: 6182037 Manufacturer SKU: TUN6182037 SKU: 6182037-Tungaloy Designation: RCGX120700-T1 Model series: ISO turning indexable inserts Material: Carbide Grade: TS300 Chipbreaker: T1 Application: Turning Facts Plate size: 12 mm Plate thickness: 7.94 mm Clearance angle: 7° ISO code: 120700 Plate form: round Hole style: special Special features Tungaloy carbide grade TS300 Round insert for stable seating ISO‑standard geometry for predictable fit T1 chipbreaker for controlled chips Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The Tungaloy RCGX120700‑T1 insert in TS300 grade is intended for general turning applications and performs well on a broad range of steels and alloyed materials; suitability should be confirmed against the specific workpiece material and cutting parameters. How does the T1 chipbreaker affect machining? The T1 chipbreaker on the insert promotes controlled chip formation, reducing entanglement and heat concentration; this results in steadier cutting conditions and helps preserve edge life of the RCGX120700‑T1 insert. Which dimensions are critical when checking holder compatibility? Key dimensions are the round plate diameter (12 mm), thickness (7.94 mm) and the 7° clearance angle; these, together with the insert’s ISO designation, determine whether a holder or boring bar is compatible. Is the insert supplied with a coating? The product is specified as TS300 grade carbides; for information on any additional surface finishes or coatings, refer to the grade specification TS300 as supplied by Tungaloy. What is the manufacturer SKU and article number for ordering? Ordering references are Manufacturer SKU TUN6182037 and article number 6182037 for the RCGX120700‑T1 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1003M0 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated cemented carbide and ISO-standard geometry for reliable, repeatable turning in demanding materials; the 7° clearance and 3.18 mm plate thickness provide stable cutting and secure clamping. Order directly via Metav Werkzeuge or request specification support for optimal holder matching. RCMM 1003M0 AH8005 — Tungaloy indexable insert for turning A RCMM1003M0-61 AH8005 indexable insert designed for external and internal turning, featuring a 7° clearance angle and a cylindrical hole for secure mounting. PVD-coated cemented carbide grade AH8005 ISO RCMM1003M0-61 geometry for versatile turning 7° clearance angle, cylindrical hole for secure clamping 3.18 mm plate thickness for stable cutting performance Productivity through wear-resistant grade and coating The combination of a PVD-coated surface and the AH8005 carbide grade delivers a measurable increase in tool life when machining heat-resistant alloys and other hard materials. The coating reduces adhesive and abrasive wear, which translates into fewer index changes and longer uninterrupted cycles; this improves machine utilisation and lowers per-part processing time. Selecting this grade suits stable machining setups where consistent cutting conditions and reproducible results are required, supporting a predictable production flow. Secure clamping and ISO compatibility for fast tool changes Designed to the ISO RCMM1003M0-61 specification, the geometry ensures compatibility with standard external holders and boring bars when the correct form, size and tolerance class are observed. The cylindrical hole with secure fastening and the modest 7° clearance angle reduce rubbing and flank wear, while the 3.18 mm plate thickness adds rigidity to the cutting edge. Together these features reduce vibration and improve surface finish, enabling higher feed rates with maintained dimensional accuracy. Practical guidance for application and chip control This insert is intended primarily for turning operations; the integrated chipbreaker 61 must be matched to the workpiece material and the intended cut depth to achieve optimal chip evacuation. For heat-resistant alloys and hard steels, the AH8005 grade offers stable edge behaviour under thermal load. Choose a holder that matches the plate form and size to preserve clamping integrity. When finishing, the stable cutting edge supports fine surface quality, while in roughing the robust substrate tolerates intermittent cuts with lower risk of edge chipping. Contact Metav Werkzeuge for application-specific recommendations and availability of Tungaloy indexable inserts; reach out at info@metav-werkzeuge.com or +49 2822 7131930 for precise holder matching and delivery options Technical data Article number: 6747786 Manufacturer SKU: TUN6747786 Model series: ISO-Drehwendeschneidplatten Dimensions & angles Plate thickness: 3.18 mm Inscribed size: 10 mm Clearance angle: 7° Corner radius: 0 mm Special features ISO designation: RCMM1003M0-61 Material: carbide Coating: PVD Plate form: round Hole: with cylindrical hole Chipbreaker: 61 Typical application: turning (external and internal) FAQ What materials is this insert suitable for? The RCMM1003M0-61 AH8005 Tungaloy indexable insert is optimised for heat-resistant alloys and other hard materials; the PVD-coated carbide substrate provides wear resistance during sustained turning. Which holder types are compatible with this geometry? Compatibility requires a holder matching the ISO RCMM1003M0 geometry, correct tolerance class and fastening method; ensure the chosen external holder or boring bar accepts a round plate with a cylindrical hole. How does the 7° clearance angle affect machining? A 7° clearance angle reduces flank contact and heat build-up, improving edge life and surface finish when machining with the AH8005 grade under stable cutting conditions. Is the chipbreaker 61 suitable for roughing and finishing? Chipbreaker 61 can be used across a range of cutting depths; selection depends on material and cutting parameters—this insert offers flexibility but pairing the breaker with appropriate feeds and depths yields the best results. What identifier should be quoted for reorders or technical queries? Refer to the RCMM1003M0-61 AH8005 Tungaloy indexable insert (SKU 6747786-Tungaloy) when requesting replacements or further technical data. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1003M0 AH8015 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH8015 for balanced wear resistance and edge stability together with the chipbreaker 61 for reliable chip control; these features support steady productivity and longer tool life. Order the insert directly via Metav Werkzeuge or consult our technical team for holder compatibility and process optimisation. RCMM 1003M0 AH8015 – ISO indexable turning insert for turning, Tungaloy The RCMM1003M0-61 AH8015 Tungaloy insert is an ISO-standard, round indexable insert designed for external and internal turning of heat-resistant alloys, offering robust edge stability and consistent chip control ISO round insert RCMM 1003M0, 10 mm PVD-coated carbide grade AH8015 Ideal for heat-resistant alloys 7° clearance angle, cylindrical hole Reliable wear performance for demanding alloys The combination of PVD coating and a carbide substrate in grade AH8015 delivers a well-balanced mix of wear resistance and edge stability, making the insert particularly suitable for temperature-prone materials. The coating forms a thin, adherent layer that reduces diffusion wear and improves resistance to built-up edge; as a result, machining runs stay more consistent and tooling changes become less frequent. For operations that require steady removal rates and repeatable surface quality, this geometry and material pairing supports improved cycle-time predictability and lower cost per part. Simple integration into ISO tooling systems Compliance with the ISO indexable insert standard ensures that the geometry, tolerance and fixation features are compatible with a wide range of external holders and boring bars. The insert’s round form and cylindrical hole provide secure clamping and easy indexing; compatibility is determined by form, clearance angle, tolerance class, fastening and thickness, so toolholders with matching seat and screw dimensions will accept the part without modification. This reduces setup time, minimises machine downtime and simplifies spare-part logistics for workshops that run mixed-series tool inventories. Stable cutting, controlled chips and economic operation The chipbreaker 61 and the insert’s geometry give effective chip control for many cutting conditions, helping to avoid tangling and improving surface finish. With a 3.18 mm thickness and a 10 mm inscribed circle, the insert offers mechanical rigidity that supports stable cutting at higher feeds where appropriate. The zero corner radius focuses the cutting action for consistent profile generation in turning passes. Together these attributes contribute to longer tool life, more predictable tool-cost calculations and enhanced process reliability — benefits that are particularly valuable in production and job-shop environments seeking efficiency without compromising part quality. Contact Metav Werkzeuge for tailored advice on the Tungaloy RCMM1003M0-61 AH8015 insert, available stock and matching holders — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best configuration for the application Technical data Article number: 6747787 SKU: 6747787-Tungaloy Manufacturer SKU: TUN6747787 Model series: ISO-Drehwendeschneidplatten WPL designation: RCMM1003M0-61 Facts Insert size (inscribed circle): 10 mm Thickness: 3.18 mm Clearance angle: 7° Corner radius: 0 mm Chipbreaker: 61 Special features Material: PVD-coated carbide (grade AH8015) Shape: round insert with cylindrical hole Suitable application: turning (external and internal) Optimised for heat-resistant alloys FAQ What materials is this insert best suited for? The RCMM1003M0-61 AH8015 insert is optimised for machining heat-resistant alloys; the AH8015 grade balances wear resistance and edge stability for these demanding materials. How does the chipbreaker 61 affect performance? The chipbreaker 61 delivers controlled chip formation under typical turning conditions, improving surface finish and reducing the risk of chip entanglement when using the RCMM1003M0-61. Which holders fit this ISO round insert? Holders that accept ISO 1003M0 round inserts with a matching seat and clamping screw pattern will be compatible; compatibility depends on form, clearance angle, tolerance and plate thickness. Is the insert indexed and easy to replace during production? Yes, the round ISO format and standard hole provision enable straightforward indexing and replacement, supporting fast changeovers and reduced machine downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1003M0 AH905 Wendeplatten - Tungaloy
Combines PVD-coated AH905 carbide for enhanced wear resistance with an ISO-standard RCMM form and a 7° clearance geometry to support consistent chip control and stable cutting. Order the RCMM1003M0-61 directly via Metav Werkzeuge or consult the team for application-specific guidance. RCMM 1003M0 AH905 – Turning insert (ISO) by Tungaloy A RCMM1003M0-61 AH905 indexable insert for ISO‑standard turning, designed for external and internal turning with a 7° clearance angle and a PVD‑coated carbide grade for robust cutting performance PVD-coated carbide AH905 for high wear resistance ISO‑standard RCMM1003M0 form for holder compatibility 7° clearance angle for predictable cutting geometry Round insert with 3.18 mm thickness and cylindrical hole Consistent machining results for turning operations The insert is built to deliver reliable cutting performance in both external and internal turning. The combination of a PVD-coated carbide cutting material and the AH905 grade provides a balance between a sharp cutting edge and resistance to wear and chipping, which stabilises the process and reduces unplanned tool changes. As an ISO-standard component, the form guarantees predictable seating and repeatable clamping, facilitating consistent part quality across production batches. Designed for straightforward tool set-up and compatibility Compatibility is ensured by the ISO RCMM form, the round geometry and the central clamping feature. The insert features a 3.18 mm plate thickness and a 7° clearance angle, with a centred cylindrical hole for positive locating in compatible holders or boring bars. The system typically comprises the insert, a matching external holder or boring bar, and a shim/clamping set with spare screws, which together simplify tool assembly and shorten machine downtime during tool changes. Optimised grade and chip control for process security The AH905 grade is a wear‑ and breakage‑resistant PVD‑coated carbide designed for turning applications that demand a sharp edge and high process security. Paired with the appropriate chipbreaker, this grade supports stable chip formation and consistent surface finishes under varying cutting conditions. Choosing the correct chipbreaker and insert grade according to workpiece material and machining stability will extend tool life and maintain productivity. Choose the RCMM1003M0-61 AH905 insert from Tungaloy for dependable, process-secure turning operations — contact Metav Werkzeuge for application advice and availability Technical Data Article number: 6883009 Manufacturer SKU: TUN6883009 Model series: ISO turning inserts SKU: 6883009-Tungaloy Application: Turning Facts Size: 10 mm Thickness: 3.18 mm Clearance angle: 7° Corner radius: 0 mm Grade / chipbreaker: AH905 / 61 Special features PVD-coated carbide AH905 Round insert form Cylindrical centre hole ISO RCMM1003M0 form Compatible with external holders and boring bars System components: shim/clamping set and spare screws FAQ What types of turning tasks suit this insert? The insert is intended for external and internal turning operations; the ISO RCMM form and AH905 grade support stable machining and predictable chip formation. What does the AH905 grade offer? AH905 is a PVD‑coated carbide grade designed for wear and breakage resistance in turning; it delivers a sharp cutting edge and improved process security during operation. How is the insert mounted in a toolholder? The insert locates on the holder via its cylindrical centre hole and is secured with the appropriate clamp or screw; a matching shim or clamping kit completes the assembly. Which geometric details define the insert? Key dimensions are: 10 mm diameter, 3.18 mm thickness, 7° clearance angle and a 0 mm corner radius; the insert follows the RCMM1003M0 ISO form. Is the insert compatible with standard ISO toolholders? Yes, the RCMM1003M0 form is ISO‑standard and is compatible with holders that accept this geometry, subject to matching form, clearance, tolerance class, fastening and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1003M0 NS9530 Wendeplatten - Tungaloy
Benefit from a sharp-edge, uncoated cermet grade that reduces cutting forces and delivers superior surface finish in finishing turns; reliable ISO compatibility ensures repeatable clamping and minimal set-up time. Order the RCMM1003M0-61 NS9530 directly via Metav Werkzeuge or ask our consultants if needed. RCMM 1003M0 NS9530 indexable turning insert — uncoated cermet, 7° clearance, Tungaloy The RCMM1003M0-61 NS9530 Tungaloy insert is an ISO-format indexable turning plate designed for finishing operations in steel, featuring a sharp cutting edge for continuous cuts and consistently high surface quality. ISO indexable insert RCMM 1003M0 NS9530 Uncoated cermet for fine finishing in steel 7° clearance for low cutting forces Cylindrical hole, 3.18 mm thickness High-precision finishing for turning applications The combination of an uncoated cermet grade and a razor-sharp edge makes this insert ideally suited to finishing turning where surface quality is paramount. Cermet compositions are optimised for low built-up edge and thermal stability during light, continuous cuts; this results in a consistently improved surface finish and reduced need for downstream grinding. For operations with small depths of cut and steady feed, expect lower cutting forces and a marked reduction in burr formation, which together increase process efficiency and reduce rework. Secure seating and ISO compatibility to reduce set-up time Compatibility with clamping systems is determined by form, clearance, tolerance class, fastening and dimensions; this plate conforms to ISO indexing for simple integration into established toolholders. The cylindrical hole and standard format ensure secure seating and repeatable placement, reducing downtime for re‑set and inspection. The plate’s 3.18 mm thickness and round geometry contribute to predictable stiffness in the tool assembly, which supports repeatable part tolerances and fewer rejected components. Stable chip formation and selection guidance for continuous cuts The integrated chipbreaker 61 is tailored for continuous cutting conditions typical in finishing steel, promoting stable chip flow and manageable evacuation. When combined with the NS9530 grade, the system supports steady cutting at low feeds for an improved surface and longer edge life under the intended conditions. Selection of chipbreaker and grade should be matched to the workpiece material and rigidity of the set‑up; choosing the correct configuration reduces tool wear and increases overall productivity. Practical notes on geometry and material suitability The round 10 mm plate form with a 0 mm corner radius is optimised for true finishing tasks where minimal corner rounding is required; such geometry is suitable for external and internal turning with small feeds. The insert is specifically intended for machining steel in finishing passes; machining stability and workpiece hardness should guide the choice of holder and cutting parameters. If further technical specifications or cutting data are required, the team is available to advise: info@metav-werkzeuge.com, +49 2822 7131930. Contact Metav Werkzeuge for tailored recommendations on Tungaloy finishing inserts and to ensure the correct selection for specific turning applications Technical Data Article number: 6998612 Manufacturer SKU: TUN6998612 SKU: 6998612-Tungaloy Facts Thickness: 3.18 mm Size: 10 mm Clearance angle: 7° Corner radius: 0 mm Hole style: cylindrical hole Chipbreaker: 61 Special features Uncoated cermet grade NS9530 For finishing cuts in steel ISO indexable turning plate, round form Compatibility depends on holder form, clearance, tolerance, fastening and thickness FAQ What applications is this insert intended for? This insert is intended for finishing operations in turning, especially external and internal finishing passes on steel components using the RCMM1003M0-61 NS9530 Tungaloy indexable plate. How does the chipbreaker affect performance? The chipbreaker 61 promotes stable chips during continuous cuts; in combination with the NS9530 grade it supports consistent surface quality and reliable chip evacuation for finishing operations. Which materials are suitable for this grade? The NS9530 uncoated cermet grade is optimised for machining steel in finishing conditions and delivers a sharp edge with low cutting forces for improved surface finish. How can compatibility with a toolholder be ensured? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; verify these attributes against the holder specification to ensure correct fit for the RCMM1003M0-61. Is this insert appropriate for interrupted cuts? This plate and chipbreaker are designed primarily for continuous finishing cuts; interrupted or highly variable cuts may require a different chipbreaker or grade to preserve edge life and cutting stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1003M0 T9215 Wendeplatten - Tungaloy
Combine the CVD-coated T9215 carbide grade with the ISO RCMM1003M0-61 form for reliable medium-steel turning and consistent tool life; order or request compatibility advice via Metav Werkzeuge. RCMM 1003M0 T9215 — Turning insert (ISO RCMM1003M0-61) by Tungaloy The RCMM1003M0-61 T9215 is an ISO-standard round turning insert designed for medium steel machining and compatibility with standard external holders and boring bars CVD-coated T9215 for wear resistance ISO RCMM1003M0-61 form for broad compatibility 7° clearance angle for secure cutting geometry Round 10 mm plate with cylindrical hole High productivity for medium steel turning The indexable insert is built on a CVD-coated carbide substrate in grade T9215, offering a balanced combination of wear resistance and fracture toughness that supports high feed rates in continuous to slightly interrupted cuts. The coating deposited by chemical vapour deposition enhances surface hardness and thermal stability, which reduces flank wear and extends the interval between indexings. As a result, machining sequences experience fewer tool changes and more stable cycle times, delivering measurable improvements in throughput for routine turning operations. Precise fit and stable cutting geometry for secure seating Compliance with the ISO RCMM1003M0-61 form ensures predictable seating with compatible clamping systems; compatibility is determined by form, clearance angle, tolerance class, attachment method, size and thickness. The component’s 7° clearance and 3.18 mm plate thickness produce a defined cutting edge position and stable contact with the clamp or shim, while the cylindrical hole supports concentric mounting and repeatable index positions. These characteristics reduce vibration and promote consistent surface finish when used with a suitable external holder or boring bar and the recommended underlay and fastening set. Chip control and application guidance for reliable processes The plate carries chipbreaker 61, which is intended for turning of steel under stable to moderately interrupted conditions; the chipformer geometry assists in producing controllable chips and reduces the risk of re-cutting. Selection of chipbreaker and grade should match the workpiece material and process stability — for example, the T9215 grade is a first choice for medium-steel applications where a combination of wear resistance and breakage resistance is required. For system-level reliability, the insert functions as one component of a setup comprising the indexable plate, an appropriate external holder or boring bar, a locating shim/clamp set and replacement screws, all of which influence final performance. For ordering or detailed compatibility advice with Tungaloy’s T9215 indexable plates, contact Metav Werkzeuge for product availability and technical consultation: info@metav-werkzeuge.com • +49 2822 7131930 Technical information Article number: 6774048 Manufacturer SKU: TUN6774048 SKU: 6774048-Tungaloy Material: carbide Grade: T9215 Model series: ISO turning indexable inserts Application: turning Core dimensions & numbers Plate size: 10 mm Plate thickness: 3.18 mm Clearance angle: 7° Corner radius: 0 ISO code: 1003M0 Design & special features CVD coating Round plate with cylindrical hole ISO RCMM1003M0-61 form Chipbreaker 61 Compatible with standard external holders and boring bars FAQ What materials is the RCMM1003M0-61 T9215 suitable for? The RCMM1003M0-61 T9215 insert is optimised for medium steel machining and delivers a balance of wear resistance and toughness for continuous to lightly interrupted turning. How does the CVD coating improve performance on the RCMM1003M0-61 T9215? The CVD-coated surface on the RCMM1003M0-61 T9215 increases hardness and thermal stability, which reduces flank wear and extends the usable life of the cutting edge under typical turning speeds. Which holders are compatible with the RCMM1003M0-61 T9215 insert? Compatibility for the RCMM1003M0-61 T9215 depends on the ISO RCMM form, clearance angle, tolerance class, attachment and plate size; it is intended for use with standard ISO-compatible external holders and boring bars matching these parameters. What is the effect of chipbreaker 61 on machining? Chipbreaker 61 on the RCMM1003M0-61 T9215 promotes controlled chip formation during steel turning, improving surface quality and reducing the risk of entangling long chips in stable to moderately interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1003M0 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of low cutting forces, clean surface finishes and ISO compatibility for efficient turning processes. Benefit from the sharp, uncoated carbide grade and consistent geometry to ensure predictable tool life and stable chip formation. Order genuine Tungaloy inserts via Metav Werkzeuge or consult our specialists for application support. RCMM 1003M0 TH10 Turning — RCMM1003M0-61 Tungaloy insert RCMM1003M0-61 TH10 Tungaloy insert is an ISO-format turning insert designed for external and internal turning of non-ferrous materials and applications requiring low cutting forces. ISO format RCMM1003M0 insert Uncoated carbide grade TH10 7° clearance angle for low cutting forces Cylindrical hole, 3.18 mm thickness Consistent low-force cutting for non-ferrous workpieces The high-sharpness uncoated carbide grade TH10 provides a low-friction cutting edge that reduces power draw and heat generation when machining aluminium, brass and similar alloys. This sharp indexable insert is particularly suitable where minimal cutting force and a clean surface are priorities; the geometry supports reduced burr formation and improved finish without the need for an additional coating. The result is a more economical process for short to medium production runs where edge sharpness outweighs the abrasion resistance of coated grades. Seamless integration with ISO turning systems for reliable set-up Designed to the ISO specification, the round RCMM1003M0-61 format ensures compatibility with holders that match form, clearance, tolerance class and mounting requirements. The insert’s cylindrical hole and standard dimensions (plate size 10 mm, thickness 3.18 mm) make locating and clamping straightforward, reducing set-up time and variability between tool changes. Attention to the 7° clearance angle prevents rubbing on the flank and helps maintain dimensional accuracy across batches, supporting stable production and predictable performance. Stable chip control and straightforward application selection The chipbreaker code 61 and the insert’s form are tuned to promote manageable chip formation for the intended materials and turning operations. Where higher temperatures or harder workpieces are expected, a coated or tougher grade should be considered; however, for many non-ferrous turning tasks the uncoated TH10 grade delivers cleaner surfaces and lower cutting forces. Selection should match material, depth of cut and machine rigidity; the insert’s geometry supports both external and internal turning when paired with an appropriate holder and clamping set. For unfamiliar applications, a short trial cut under controlled conditions will quickly confirm the best feeds and speeds. For genuine Tungaloy inserts and impartial application advice, contact Metav Werkzeuge — our team can advise on holder compatibility, recommend cutting parameters and supply the original RCMM1003M0-61 TH10 Tungaloy inserts for your production needs. Technical Data Article number: 6805844 Manufacturer SKU: TUN6805844 SKU: 6805844-Tungaloy Model series: ISO turning inserts Product name: RCMM1003M0-61 TH10 Tungaloy insert Core data Thickness: 3.18 mm Plate size: 10 mm Clearance angle: 7° Corner radius: 0 mm Hole style: Cylindrical hole Materials & features Material: carbide Grade/coating: TH10 (uncoated) Chipbreaker: 61 Application: Turning; external and internal turning Format: ISO-format indexable insert; round plate FAQ What materials is this insert best suited to? The RCMM1003M0-61 TH10 Tungaloy insert is optimised for non-ferrous materials such as aluminium and brass, where a sharp uncoated carbide edge produces low cutting forces and clean surfaces. Is this insert compatible with standard ISO holders? Yes, the insert follows ISO turning dimensions; compatibility depends on matching the holder’s form, clearance, tolerance class, size and thickness to the RCMM1003M0 format. Does the insert have a coating for high-temperature applications? The TH10 grade is uncoated carbide; it is chosen for its sharpness and low cutting forces rather than high-temperature abrasion resistance. What is the purpose of the cylindrical hole in this insert? The cylindrical hole ensures secure clamping and precise positioning in compatible holders, contributing to repeatable setup and stable machining. How does the chipbreaker 61 affect machining performance? Chipbreaker 61 helps control chip shape and evacuation for the intended materials and cutting conditions, improving process stability and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1204M0 AH8005 Wendeplatten - Tungaloy
Reliable turning performance is achieved by combining the wear‑resistant PVD‑coated carbide grade AH8005 with ISO compatibility and a 7° relief angle for stable cutting. Choose the RCMM1204M0‑61 AH8005 insert for predictable tool life and consistent surface quality; order the component directly via Metav Werkzeuge or ask our consultants if needed. RCMM 1204M0 AH8005 — ISO turning insert, PVD‑coated carbide (Tungaloy) The RCMM1204M0-61 AH8005 is an ISO‑standard round indexable insert engineered for external and internal turning of heat‑resistant alloys and other hard materials. PVD‑coated carbide grade AH8005 ISO‑standard indexable turning insert 7° relief angle for stable cutting Cylindrical hole, suitable for standard holders Longer tool life thanks to a wear‑resistant grade The PVD‑coated carbide grade AH8005 is designed for extended service in demanding turning operations. Its coating increases resistance to abrasive and thermal wear, which translates into fewer tool changes and more productive machining cycles. For stable setups, the combination of the coating and a robust substrate provides a controlled flank wear progression, supporting predictable tool change intervals and reduced unplanned downtime. This results in a measurable improvement in process efficiency and component repeatability. Reliable fit and secure clamping for consistent results Compliance with the ISO series ensures compatibility with standard external holders, but correct mating depends on the insert form, 7° relief angle, tolerance class, fastening method, size and thickness. The round insert with a cylindrical hole requires the appropriate carrier and clamping set for optimum seat and repeatability. The complete system comprises the indexable insert, a matching external holder or boring bar, a shim/clamping set and replacement screws; assembled correctly, this system reduces vibration and supports consistent surface finish and dimensional control. Better chip control and surface quality with the chipbreaker The specified chipbreaker (designation 61) is matched to the grade and intended for stable cutting of heat‑resistant alloys and harder workpieces. A suitable chipformer contributes directly to improved swarf control and prevents chip entanglement in turning cycles, lowering the risk of interrupted cuts and tool damage. As a consequence, workpieces benefit from enhanced surface integrity and reduced secondary finishing. Selecting the correct chipbreaker and geometry for the machining task is crucial to exploit the full potential of the insert. Application scope and practical recommendations for turning This insert is specified for general turning operations where stability and wear resistance are priorities, particularly on heat‑resistant alloys and hardened materials. For best results, match the AH8005 grade and chipbreaker to the workpiece alloy and feeding strategy; stable clamping and moderate depth of cut will extend tool life. When combining high feeds or interrupted cuts, verify holder rigidity and seating to preserve the insert seat. For customers seeking application support or machining data, the details of holder selection and cutting parameters can be provided on request. For application advice, tooling recommendations or to order Tungaloy inserts and accessories, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930; our consultants provide technical guidance and availability information Technical data Article number: 6747788 Core technical data Designation: RCMM1204M0-61 AH8005 Manufacturer SKU: TUN6747788 SKU: 6747788-Tungaloy Model series: ISO indexable turning inserts Grade / coating: AH8005 / PVD Material: Carbide Thickness: 4.76 mm Size: 12 mm Relief angle: 7° Corner radius: 0 mm Hole: with cylindrical hole Chipbreaker: 61 Application: Turning Special features Round insert shape ISO‑standard for holder compatibility Wear‑resistant grade for heat‑resistant alloys and hard materials System components: insert, holder or boring bar, shim/clamping set, replacement screws Designed for stable machining and consistent tool life FAQ What materials is this insert best suited for? The RCMM1204M0-61 AH8005 insert is intended for heat‑resistant alloys and other hard materials; the AH8005 grade and PVD coating deliver improved wear resistance in these applications. How does the insert locate in the holder? The round insert uses a cylindrical hole and must be clamped in a matching ISO‑compliant holder with the correct shim and screw set to ensure repeatable seating and rigidity. What is the benefit of the 7° relief angle? A 7° relief angle reduces rubbing on the flank face, improving chip evacuation and contributing to stable machining and longer tool life with the AH8005 grade. Can this insert be used for internal as well as external turning? Yes, the ISO‑standard geometry and round shape permit both external and internal turning when paired with a suitable external holder or boring bar. What role does the chipbreaker 61 play? Chipbreaker 61 is matched to the insert grade and intended cutting conditions; it improves chip formation and control, which helps maintain surface quality and process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1204M0 AH8015 Wendeplatten - Tungaloy
The PVD-coated carbide AH8015 grade combined with an ISO RCMM 1204M0 form delivers stable cutting performance for heat-resistant alloys; benefit from consistent edge life and straightforward holder compatibility — order through Metav Werkzeuge or consult our specialists for application advice. RCMM1204M0-61 AH8015 — RCMM indexable turning insert by Tungaloy RCMM1204M0-61 AH8015 is an ISO-compliant indexable insert designed for turning operations on heat-resistant alloys, offering a balance between wear resistance and cutting-edge stability. PVD-coated carbide grade AH8015 ISO-compliant RCMM 1204M0 form 4.76 mm plate thickness, 12 mm size Cylindrical hole, 7° relief angle Consistent performance for heat-resistant alloys The insert is based on a PVD-coated carbide substrate in grade AH8015, selected to combine wear resistance with edge stability when machining demanding, heat-resistant materials. This balance reduces unexpected tool changes and supports a steady production rhythm. The chipbreaker 61 geometry assists in predictable chip control during both external and internal turning, which simplifies process setup and reduces cycle-time variations. Compatibility with standard ISO holders ensures a quick transition from tool selection to productive cutting. Clear mounting and ISO compatibility for reliable set-up The component is an ISO-compliant RCMM 1204M0 indexable insert with a cylindrical hole to match standard clamping systems. Compatibility depends on matching form, relief angle, tolerance class, clamping, size and thickness; the insert’s 4.76 mm thickness and 12 mm nominal size are decisive for secure seating and repeatable positioning. Where process stability matters, choosing an insert that aligns precisely with the holder avoids runout and vibration, helping to maintain surface finish and dimensional accuracy over extended runs. Practical advantages of the AH8015 grade The AH8015 grade is formulated as a first choice for general machining of heat-resistant alloys, offering an effective compromise between abrasive wear resistance and toughness at the cutting edge. This translates into extended tool life under higher cutting temperatures and improved resistance to edge chipping. The PVD coating further enhances thermal resistance and adhesion, assisting in consistent performance across a range of feeds and cutting speeds commonly employed in alloy machining. Geometry and application recommendations for stable machining With a 7° relief angle and a corner radius of 0 mm, the insert suits operations where low-profile edges and defined cutting behaviour are required. The round plate form contributes to multi-edge indexing, promoting economical use of the insert body. For best results in external and internal turning, select the matching holder and clamping set specified for the RCMM form and verify that the chipbreaker style and grade align with the workpiece material and machining method. Contact Metav Werkzeuge for application guidance and current availability of the Tungaloy RCMM1204M0-61 AH8015 indexable insert via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6747789 SKU: 6747789-Tungaloy Manufacturer SKU: TUN6747789 Manufacturer: Tungaloy Facts Model series: ISO-Drehwendeschneidplatten ISO designation: 1204M0 Plate form: round Plate size: 12 mm Plate thickness: 4.76 mm Relief angle: 7° Corner radius: 0 mm Chipbreaker: 61 Hole: with hole (cylindrical) Application: Turning Special features PVD-coated carbide material Grade AH8015 for heat-resistant alloys ISO-compliant RCMM form for standard holders Suitable for external and internal turning Designed for consistent chip control and edge stability System includes insert, matching holder, clamping set and replacement screws FAQ What materials is this insert intended for? The RCMM1204M0-61 AH8015 insert is intended primarily for the general machining of heat-resistant alloys; the AH8015 grade provides a balance of wear resistance and edge stability. How is holder compatibility determined? Compatibility is determined by matching the insert form, relief angle, tolerance class, clamping method, size and thickness to the holder; the RCMM 1204M0 form and 4.76 mm thickness should match the clamping system used. Does the insert support internal as well as external turning? Yes, the geometry and chipbreaker configuration are suitable for both external and internal turning when paired with the appropriate holder and tool overhang considerations. What are the key geometry values to check before use? Important values include the 12 mm plate size, 4.76 mm thickness, 7° relief angle and the 0 mm corner radius to ensure correct seating and intended cutting behaviour. Which chipbreaker is fitted to the insert and why does it matter? This insert features the chipbreaker 61, which aids in controlled chip formation for improved surface finish and stable cutting when machining the intended alloy types. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1204M0 AH905 Wendeplatten - Tungaloy
Combining a PVD‑coated AH905 carbide grade with ISO‑standard geometry and a 7° clearance, this insert delivers consistent cutting performance and reliable chip control in external and internal turning. Benefit from reduced tool changes and steady process stability — order directly via Metav Werkzeuge or consult our technical advisors for application matching. RCMM 1204M0 AH905 — RCMM1204M0-61 Turning Insert by Tungaloy (PVD‑coated, chipbreaker 61) A RCMM1204M0-61 AH905 ISO turning insert engineered for robust external and internal turning, offering a wear‑resistant PVD coating and stable chip control for industrial machining. PVD-coated AH905 carbide grade ISO-standard geometry for holder fit 7° clearance angle for reliable cutting Chipbreaker 61 for controlled chips Consistent cutting performance for productive turning The PVD‑coated AH905 grade is formulated to be wear‑resistant and chipping‑resistant, supporting uninterrupted production in medium‑to‑high cutting conditions. As an indexable insert, the RCMM1204M0-61 provides a consistently sharp edge thanks to the PVD layer, which reduces flank wear and preserves cutting geometry. This results in longer effective tool life and fewer interruptions for regrinding or replacement, improving overall machining throughput. Seamless integration into ISO tool systems Compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness; this round insert conforms to ISO turning standards to simplify tool selection and fixture matching. The part is a round insert with a 12 mm diameter and 4.76 mm thickness, featuring a cylindrical hole for secure fastening and a zero corner radius for predictable cutting engagement. The standardised geometry minimises trial‑and‑error at setup and helps maintain concentricity and repeatability in batch production. Controlled chips and process security for reliable finishing With chipbreaker 61, the insert produces predictable chip forms that promote consistent surface finish and safe chip evacuation in both external and internal turning. The combination of grade and breaker reduces the risk of unexpected edge failure, translating into steadier cycle times and better part quality. For components that demand dimensional stability, the insert’s balanced design supports reproducible results across serial production. Economic advantages through reduced downtime Selecting a grade that pairs toughness with a protective PVD layer helps extend tool life and lower per‑part machining costs. Fewer insert changes reduce machine idle time and operator interventions, while ISO interchangeability aids quick replacements without costly special tooling. For workshops seeking immediate productivity gains, the design provides an efficient route to higher uptime and predictable maintenance intervals. If there is uncertainty about the suitability for a particular material or turning task, Metav Werkzeuge can provide application guidance and data‑driven recommendations to match the right chipbreaker and grade to the workpiece and process. For precision turning tasks that require both wear resistance and process security, contact Metav Werkzeuge to discuss the Tungaloy RCMM1204M0-61 AH905 insert and receive tailored application advice. Technical data Article number: 6883011 Manufacturer SKU: TUN6883011 SKU: 6883011-Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Insert diameter: 12 mm Thickness: 4.76 mm Clearance angle: 7° Corner radius: 0 mm Chipbreaker: 61 Hole style: cylindrical hole Features Grade/coating: AH905 (PVD-coated) Material: Carbide (cemented carbide) Shape: round insert Application: external and internal turning Compatibility: ISO‑standard insert FAQ What materials is this insert suitable for? The RCMM1204M0-61 AH905 insert is designed as a general‑purpose turning grade; the AH905 PVD coating and carbide substrate make it suitable for a broad range of steels and common workshop materials in turning operations. How does chipbreaker 61 affect machining? Chipbreaker 61 promotes controlled chip formation and evacuation; when used with the RCMM1204M0-61 it helps maintain consistent surface finishes and reduces the risk of chip entanglement in both external and internal turning. What determines holder compatibility for this ISO insert? Compatibility depends on form, free angle, tolerance class, fastening and size. The RCMM1204M0-61 is an ISO‑standard round insert with a cylindrical hole and a 7° clearance, so it fits holders designed for the ISO 1204M0 form and corresponding tolerance class. Is this insert suitable for high‑speed machining? The AH905 PVD‑coated carbide grade is engineered for a balance of wear resistance and edge strength; it supports productive cutting at elevated speeds provided cutting parameters and coolant strategies are appropriately adjusted. Can the insert be used for finishing and roughing? The insert’s zero corner radius and chipbreaker 61 make it adaptable: it excels in finishing where stable chip control and surface quality are required, and can be employed for light to moderate roughing depending on the workpiece and machine stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1204M0 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, NS9530 uncoated cermet cutting grade and ISO-standard compatibility for consistent finishing of steel components; the insert delivers low cutting forces and superior surface quality. Order the RCMM1204M0-61 directly via Metav Werkzeuge or consult our team for application-specific advice. RCMM1204M0-61 NS9530 Tungaloy turning insert — uncoated cermet for finishing RCMM1204M0-61 NS9530 is an ISO-compliant turning insert designed for fine finishing operations on steel, optimised for continuous cuts and small depths of cut ISO-compliant round insert, secure cylindrical hole Uncoated cermet NS9530 for superior finish 7° clearance angle for low cutting forces Ideal for continuous finishing of steel Consistent surface quality from an uncoated finishing grade The uncoated cermet NS9530 is formulated for finishing applications where high surface finish and low cutting forces are paramount. With a naturally sharp edge, this grade reduces built-up edge and vibration in continuous-cut conditions, which translates into fewer secondary operations and less time spent on polishing. For production runs where component appearance and dimensional consistency matter, the insert’s combination of a sharp cutting edge and stable edge retention supports predictable results on a range of steels, especially when using modest depths of cut and controlled feeds. Reliable fit and system compatibility for secure clamping This ISO-indexed insert is designed for use in a complete system comprising an external holder or boring bar, a supporting shim or clamp and the correct fastening screw. Compatibility is determined by shape, relief angle, tolerance class, fastening method, size and thickness; the round form with a cylindrical hole ensures positive seating and repeatable clamping in matched holders. The specified 7° relief angle reduces rubbing and helps maintain low cutting forces, while the standard format simplifies tool inventory management and holder selection across the shop floor. Durable substrate and predictable cutting behaviour The body is produced with a cemented carbide substrate that provides structural support and vibration resistance, while the cermet cutting grade performs the cutting action. This combination yields a stable cutting edge and good wear characteristics in finishing tasks, particularly on steels where thermal and mechanical loads are moderate. The insert’s geometry and the choice of chipbreaker 61 support consistent chip formation under the recommended continuous-cut conditions, helping to maintain process stability and extend effective index cycles. Practical advice for integration and tool selection For reliable results, match the insert’s NS9530 finishing grade and chipbreaker 61 to the workpiece material and the intended stability of the set-up. Use holders that conform to the ISO form and tolerance for the RCMM series to guarantee seat accuracy and clamp integrity. When switching from roughing grades, reduce feed slightly and confirm surface quality before full production; this approach leverages the insert’s low cutting-force characteristics and preserves the sharp edge for longer runs. If further guidance is required on holder selection or cutting parameters, application-specific consultation is available. For precise finishing with Tungaloy’s NS9530 grade, contact Metav Werkzeuge for tailored recommendations and secure supply of RCMM1204M0-61 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998613 SKU: 6998613-Tungaloy Manufacturer SKU: TUN6998613 Model: RCMM1204M0-61 Facts Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0 mm Relief angle: 7° Chipbreaker: 61 Special features Cutting grade: NS9530 (uncoated cermet) Substrate: cemented carbide Application: Turning (external and internal) Mounting: with cylindrical hole Plate form: round Model series: ISO turning indexable inserts FAQ Which materials is this insert suited for? The RCMM1204M0-61 with NS9530 is optimised for steel finishing; its uncoated cermet grade provides low cutting forces and excellent surface quality on a wide range of steels. How does the round form and cylindrical hole affect clamping? The round insert with a cylindrical hole ensures concentric seating and stable clamping in compatible ISO holders, improving repeatability and reducing the risk of misalignment. What performance benefits does NS9530 offer compared with coated grades? As an uncoated cermet, NS9530 offers a very sharp cutting edge and reduced tendency for built-up edge in finishing applications, which yields superior surface finish and consistent dimensional results under continuous-cut conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1204M0 T9215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade and ISO compatibility for consistent, productive turning of medium steels; the geometry and chipbreaker deliver stable chip control while the 7° relief supports reliable edge life. Order the RCMM1204M0-61 T9215 insert directly via Metav Werkzeuge or consult our specialists for holder matching. RCMM RCMM1204M0 T9215 indexable turning insert for turning applications — Tungaloy The RCMM1204M0-61 T9215 Tungaloy insert is an ISO-form indexable turning plate designed for external and internal turning of medium steels, offering a balance of wear resistance and breakage safety for high-productivity machining. CVD-coated carbide grade T9215 ISO RCMM1204M0 form, stable clamping Suitable for medium steel turning Cylindrical hole, 7° relief angle Consistent cutting performance for medium-steel turning The CVD-coated T9215 grade combines high wear resistance with enhanced fracture toughness, making it a dependable choice for continuous or lightly interrupted cuts in medium steels. The coated cemented carbide substrate preserves edge geometry under load, which translates into predictable tool life and reduced downtime. For production environments seeking steady cycle times, this geometry and grade help maintain finish quality over longer tool life. Clear guidance on holder compatibility and mounting Compatibility with a toolholder depends on the insert’s shape, relief angle, tolerance class, clamping method, size and thickness. The ISO RCMM1204M0 form ensures standardised interface characteristics, while the cylindrical hole and specified dimensions enable secure clamping in matching indexable holders. When selecting a clamping system, match the insert’s dimensions and tolerance class to the holder to avoid instability and premature wear. Coating, geometry and chip control explained The integrated chipbreaker 61 is designed to control and break chips efficiently in turning operations of steel grades; this reduces the risk of long, entangling swarf and improves surface integrity. The plate’s 4.76 mm thickness and 7° relief angle contribute to cutting stability and heat distribution. For customers unfamiliar with coatings, CVD (chemical vapour deposition) provides a robust surface layer that enhances abrasion resistance while preserving the core toughness of the carbide body. Productivity and process reliability in practice By combining a robust substrate, a protective coating and a purpose-built chipbreaker, this insert supports higher material removal rates with consistent surface finish. The round plate form and precision tolerances reduce vibration at the cutting edge, supporting repeatable results in batch production. Where part precision and cycle-time consistency matter, the geometry and grade work together to lower the frequency of tool changes and improve overall productivity. For tailored advice on integrating the Tungaloy RCMM1204M0-61 T9215 insert into an existing turning cell, or to request compatibility checks for specific holders, contact Metav Werkzeuge — our team will advise on holder matching and supply options. Technical Data Manufacturer item number: 6772458 SKU: 6772458-Tungaloy Manufacturer SKU: TUN6772458 Facts Plate thickness: 4.76 mm Plate size: 12 mm Relief angle: 7° Corner radius: 0 mm Special features Material: cemented carbide Coating: CVD T9215 Chipbreaker: 61 Hole style: cylindrical hole Plate form: round Application: external and internal turning FAQ What materials is this insert suitable for? The Tungaloy RCMM1204M0-61 T9215 insert is primarily aimed at medium-steel machining and offers a balance of wear resistance and toughness for productive turning operations. How does the T9215 coating affect tool life? The T9215 CVD coating increases abrasion resistance on the insert, which helps extend edge life under continuous cutting conditions and supports consistent surface quality. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; matching these parameters ensures secure clamping and stable cutting with the RCMM1204M0-61 insert. What role does chipbreaker 61 play? Chipbreaker 61 is designed to generate short, controllable chips in steel turning, improving swarf handling and helping to protect the workpiece surface from irregular chip contact. Is the insert suitable for interrupted cuts? The insert is suitable for continuous to lightly interrupted cuts; for heavy interruptions, a grade with higher toughness may be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1204M0 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9225 and the ISO round geometry for reliable performance in medium‑to‑heavy turning operations; the combination of robust cutting grade and standardised form supports consistent tool life and stable chip formation. Order the insert directly via Metav Werkzeuge or request guidance from our consultants for optimal holder compatibility. RCMM 1204M0 T9225 turning insert (RCMM1204M0-61) by Tungaloy — ISO round 12 mm, CVD-coated carbide The RCMM1204M0-61 T9225 Tungaloy is an ISO‑standard round turning insert designed for external and internal turning, offering a robust CVD‑coated carbide grade for medium‑to‑heavy steel machining. CVD-coated carbide grade T9225 ISO round 12 mm geometry Suited for medium to heavy steel turning Engineered for robust steel turning and longer tool life The chosen grade T9225 is a CVD‑coated carbide developed as a universal, tough option for the demands of medium‑to‑heavy steel machining. As a result, the insert delivers stable chip formation and improved resistance to edge chipping under variable engagement or slightly interrupted cuts. The coating provides wear protection at elevated temperatures while the substrate maintains the required toughness, which translates directly into longer intervals between indexings and reduced tool change frequency — a clear advantage for productive turning cycles. Compatibility, geometry and system integration for predictable set‑up This insert is an ISO 1204M0 type in a round 12 mm format with a thickness of 4.76 mm and a 7° relief angle; it is supplied with a cylindrical hole to suit pinned or clamped holders. Compatibility with a holder is determined by form, relief angle, tolerance class, attachment method, size and thickness. The insert is intended to be used as part of a complete system — the ISO plate together with a matching external holder or boring bar, an appropriate shim/clamping set and replacement screws — so the assembly is repeatable and measurable, enabling consistent setup and reduced downtime during tool changes. Application guidance and practical benefits for production floors The round geometry and chipbreaker 61 make this insert versatile for both roughing and semi finishing in turning applications, providing the ability to sustain variable cutting conditions while maintaining surface quality. The design supports a balance of strength and sharpness, which helps to maintain cutting-edge integrity during interrupted cuts. In practice, this delivers the primary production benefits of improved process stability and fewer scrap parts due to tool failure, while preserving component tolerances and surface finish. For integration into existing tool pools, the insert’s system compatibility ensures straightforward replacement and predictable performance. Contact Metav Werkzeuge today for availability and expert advice on selecting the correct Tungaloy turning insert and matching holder for specific machining tasks Technical data Article number: 6781163 Manufacturer SKU: TUN6781163 Merchant SKU: 6781163-Tungaloy Designation: RCMM1204M0-61 Model series: ISO turning indexable inserts Material: carbide Grade: T9225 Core specifications Size: 12 mm Thickness: 4.76 mm Relief angle: 7° Corner radius: 0 mm Hole: with cylindrical hole Chipbreaker: 61 Features and application CVD-coated carbide substrate Application: turning (external and internal) Suited for medium-to-heavy steel machining Compatibility depends on form, relief angle and size System composition: ISO insert, holder/boring bar, shim/clamping set, spare screws FAQ What holder features are required for this insert? Compatibility is determined by form, relief angle, tolerance class, attachment, size and thickness; the RCMM1204M0-61 requires a holder or boring bar that accepts ISO 1204M0 round inserts with a cylindrical hole. Which materials is this insert best suited to machine? The T9225 grade and CVD coating are optimised for medium‑to‑heavy machining of steel, offering toughness for variable engagement and good wear resistance under elevated temperatures. How does the chipbreaker 61 affect machining? The chipbreaker 61 is designed to promote stable chip control in turning applications, reducing the risk of long, entangling chips and supporting consistent surface quality during roughing and semi‑finishing passes. Is the insertion suitable for interrupted cuts? Yes; the combination of the tough T9225 substrate and the coating makes the insert resilient under slightly interrupted cuts, improving reliability and reducing edge chipping on demanding cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1204M0 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of reliable uncoated carbide, ISO compatibility and low cutting forces for uninterrupted turning operations; order the insert directly via Metav Werkzeuge or consult their specialists for application support. RCMM 1204M0 TH10 indexable insert for turning — Tungaloy The RCMM 1204M0 TH10 indexable insert is an ISO-formatted, round turning insert engineered for external and internal turning where low cutting forces and clean surfaces are required. ISO-series round indexable insert, 12 mm diameter Uncoated carbide grade TH10 for low cutting forces 7° clearance angle with cylindrical-hole mounting 4.76 mm plate thickness, 0 mm corner radius Increased machining efficiency through low cutting forces The combination of an uncoated carbide cutting edge and the TH10 grade delivers reduced cutting resistance and consistent chip formation when machining non-ferrous materials and similar alloys. This results in lower power draw, reduced workpiece distortion and improved surface quality, which together contribute to shorter cycle times and more predictable output. The insert’s geometry and the integrated 61 chipbreaker support stable chip flow, so setup time is minimised and throughput becomes more reliable. Simple integration and dependable fixture compatibility Designed according to ISO conventions, the ISO-series geometry ensures straightforward interchangeability with matching holders and boring bars. The round form with a cylindrical hole and a 7° clearance angle allows secure clamping while accommodating a range of holder designs; the 12 mm diameter and 4.76 mm thickness provide robust seating and repeatable positioning. By following the specified form, tolerance class and fixing method, the insert integrates into existing tool systems without additional modification, reducing changeover effort and improving process stability. Versatile use for finishing and light- to medium-duty turning This insert excels in both external and internal turning where low cutting forces and clean finishes are priorities. The uncoated, sharp edge of the TH10 grade supports fine surface finishes on softer metals and non-ferrous alloys, while the round shape and zero corner radius enable safe approaches in interrupted cuts and bores. For best results, choose a matching chipbreaker and grade according to component material and machine rigidity; correct selection helps extend insert life and maintain consistent surface integrity during production runs. The RCMM1204M0-61 is particularly suitable when reduced cutting loads and high-quality surfaces are required. For tailored advice on applying the Tungaloy RCMM 1204M0 TH10 indexable insert in specific turning tasks, contact Metav Werkzeuge (info@metav-werkzeuge.com, +49 2822 7131930) for application support and rapid supply Technical data Article number: 6805849 SKU: 6805849-Tungaloy Manufacturer SKU: TUN6805849 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Numbers / Core technical data ISO designation: 1204M0 Insert designation: RCMM Diameter: 12 mm Thickness: 4.76 mm Clearance angle: 7° Corner radius: 0 mm Grade: TH10 Chipbreaker: 61 Design / Special features Round insert shape Cylindrical hole for clamp mounting Uncoated carbide cutting edge ISO-compatible geometry for holder matching Intended application: turning FAQ What materials is this insert suited for? The RCMM 1204M0-61 TH10 Tungaloy indexable insert is formulated for non-ferrous materials and applications where an uncoated cutting edge delivers low cutting forces and clean surfaces. How is the insert mounted in a holder? Mounting relies on the ISO-compatible form and the cylindrical hole; the insert seats against the holder or shim and is secured with the appropriate clamp and fixing screw to ensure repeatable positioning. Can this insert be used for internal turning in bores? Yes, the round form and zero corner radius make the insert well suited to internal turning and interrupted cuts where approach geometry must be forgiving. What is the main advantage of the TH10 grade? TH10 is an uncoated, sharp universal grade that reduces cutting forces and supports clean surface finishes, especially on softer metals and non-ferrous workpieces. Which parameters should be adjusted for best tool life? Optimise feed, depth of cut and matching chipbreaker to the workpiece material and machine rigidity; the insert’s geometry and TH10 grade are designed to perform best with reduced cutting loads and controlled chip evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1606M0 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of T9215 CVD-coated carbide and a secure round design to increase productivity and reduce tool changes; the insert’s high wear resistance and proven toughness suit continuous to lightly interrupted turning. Order directly via Metav Werkzeuge or consult the advisors for application support. RCMM 1606M0 T9215 — Tungaloy ISO turning indexable insert (round, CVD-coated carbide) A RCMM 1606M0 T9215 indexable insert designed for ISO-standard external and internal turning, optimised for medium steel machining. CVD-coated carbide for wear resistance Optimised for medium steel machining Round 16 mm form with cylindrical hole 7° clearance angle for reliable cutting Boosted productivity with a hard-wearing grade The T9215 grade is a CVD-coated carbide that balances high wear resistance with sufficient toughness, enabling longer tool life under productive cutting conditions. For workshops focused on throughput, this material choice reduces downtime caused by frequent insert changes and supports steady-cycle production. The combination of coating and substrate is particularly effective for medium-strength steel, where abrasion and edge chipping must be controlled to maintain dimensional accuracy and consistent surface quality. Stable clamping and ISO compatibility for predictable results Manufactured to ISO plate form and tolerance parameters, the insert integrates into a standard clamping system where fit depends on holder shape, clearance angle, tolerance class, fixing method, size and thickness. The round 16 mm form with a cylindrical hole provides secure seating in dedicated round holders or modular systems, improving repeatability across tool changes. This mechanical reliability translates into fewer setup adjustments and a more predictable machining process for production environments. Geometry engineered for chip control and surface quality The geometry incorporates chipbreaker 61, which is tailored for controlled chip formation in medium steel and similar materials. Combined with a 7° clearance angle, the geometry reduces friction at the flank face and helps maintain a stable cutting edge, resulting in improved surface finish and extended edge life. The physical dimensions — 16 mm diameter and 6.35 mm plate thickness — contribute to rigidity at the cutting zone, reducing vibration and supporting consistent tolerances on turned components. Application range and machining strategies This insert is intended primarily for turning operations, suitable for both external and internal machining under continuous to slightly interrupted cuts. Selection of the T9215 grade and chipbreaker 61 is recommended when a balance of wear resistance and breakage safety is required; modest increases in feed or cutting speed can enhance productivity, provided the machine setup and workpiece clamping remain rigid. Operators should pair the insert with a matching external holder or boring bar, and choose cutting parameters matched to material hardness and stability to exploit the grade’s strengths. System integration and cost-efficiency in production An ISO-compliant insert forms part of a system comprising the insert, a compatible external holder or boring bar, underlay/clamp set and replacement screws. Using standardised inserts streamlines inventory and simplifies reordering; the robust grade and geometry reduce the frequency of replacements, improving overall tooling economy. The consistent performance of this insert supports predictable process planning and contributes to lower per-part tooling cost in medium-volume turning applications. For tailored recommendations on using Tungaloy inserts in specific turning tasks or to check stock availability, contact Metav Werkzeuge — Metav Werkzeuge GmbH is ready to advise on holder compatibility and cutting data. Technical data Article number: 6774049 Manufacturer SKU: TUN6774049 SKU: 6774049-Tungaloy Model series: ISO turning indexable inserts Designation: RCMM1606M0-61 Core specifications Size / diameter: 16 mm Thickness: 6.35 mm Clearance angle: 7° Corner radius: 0 mm Chipbreaker: 61 Features Material: carbide Grade: T9215 (CVD-coated carbide) Plate form: round Hole style: cylindrical hole Application: turning Manufacturer: Tungaloy FAQ What materials is this insert best suited for? The RCMM 1606M0 T9215 insert is best suited for medium-strength steel applications; the T9215 grade provides a balance of wear resistance and toughness appropriate for continuous to lightly interrupted cuts. How does the chipbreaker influence performance? The integrated chipbreaker 61 promotes controlled chip formation and evacuation during turning, which helps to protect the cutting edge and improves surface finish when machining compatible materials. What holders are compatible with the ISO designation? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; the ISO designation ensures the insert will fit standard ISO-compatible holders when these parameters match. Is this insert suitable for internal boring as well as external turning? Yes, the round design and secure clamping via the cylindrical hole allow use in both external turning and internal turning/boring applications when paired with an appropriate holder or boring bar. How should shops choose speeds and feeds for this grade? Shops should select cutting parameters according to workpiece material, stability and the holder system; the T9215 grade supports productive machining, but recommended speeds and feeds should be tuned to machine rigidity and desired surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMM 1606M0 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade designed for medium-to-heavy steel turning, the ISO-compliant RCMM geometry and a 7° clearance angle to maintain stable cutting under variable engagement conditions. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific selection. RCMM 1606M0 T9225 RCMM1606M0-61 — ISO turning insert for turning, Tungaloy The RCMM1606M0-61 T9225 Tungaloy insert is an ISO-design insert for external and internal turning, supplied in a round 16 mm form with a cylindrical hole for secure mounting and a 7° clearance angle. CVD-coated carbide for reliable tool life ISO 1606M0 geometry for wide compatibility Round 16 mm plate with cylindrical hole 7° clearance angle for stable cutting Consistent performance for mixed and interrupted cuts The grade is a CVD-coated carbide identified as T9225, formulated as a robust universal grade for medium-to-heavy machining of steel where changing engagement conditions or slightly interrupted cuts demand extra toughness. This composition balances hardness and fracture resistance to extend in-service life while maintaining dimensional repeatability. The outcome is fewer index changes and improved machining throughput when cutting variable workpiece sections or batch varieties. Easy selection and reliable holder compatibility Built to the ISO standard 1606M0, the insert’s geometry, thickness and fixing hole support straightforward compatibility checks with ISO external holders and boring bars. The combination of 6.35 mm thickness and a cylindrical hole in a round form simplifies clamping and ensures repeatable seat location. Clear advice: confirm holder form, tolerance class and seat fit; when these match, the insert seats securely and allows predictable cutting forces and vibration behaviour. Effective chip control and surface quality The chipbreaker 61 is optimised for chip control in turning operations, supporting coherent chip formation even under heavier engagement. Paired with the 7° clearance angle, the insert reduces rubbing and improves surface finish by keeping the cutting zone stable. For production environments that demand consistent part finish and reduced secondary cleaning, this chipbreaker geometry helps reduce downtime related to chip management. Practical system use and shop-floor advantages Within a turning system the insert forms a small part of the overall setup: the ISO-rated RCMM insert, a matching external holder or boring bar, a clamping pad or clamp set and replacement screws. The design supports fast indexability and clear identification via the manufacturer SKU, facilitating stock handling and reorder processes. When integrated with appropriate machining parameters, the insert contributes to predictable cycle times and repeatable process quality. For application-specific advice on the Tungaloy RCMM1606M0-61 T9225 insert and to arrange supply, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for rapid, expert assistance. Technical data Article number: 6781102 Manufacturer SKU: TUN6781102 SKU: 6781102-Tungaloy Model series: ISO turning inserts Material: carbide Facts Plate size: 16 mm Plate thickness: 6.35 mm Clearance angle: 7° Corner radius: 0 mm Hole: with cylindrical hole Chipbreaker: 61 Special features Grade: T9225 (CVD-coated carbide) ISO designation: RCMM1606M0-61 Round insert form Application: turning (external and internal) Compatibility requirement: form, clearance angle, tolerance and fixing FAQ What materials is this insert suitable for? The RCMM1606M0-61 T9225 is formulated as a universal grade for mid-to-heavy steel machining; its toughness also copes well with varying engagement or mildly interrupted cuts. How does the chipbreaker 61 affect machining? The chipbreaker 61 promotes controlled chip formation and evacuation, reducing entanglement and supporting consistent surface finish during turning operations with the T9225 grade. Which holder characteristics are required for correct fit? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; the ISO 1606M0 designation helps identify suitable external holders and boring bars. How is the insert identified for reordering? Order using article number 6781102 or manufacturer SKU TUN6781102 to ensure the correct RCMM1606M0-61 T9225 variant is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com