RDMA 1203TN UX30 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp UX30 carbide grade, a secure cylindrical hole clamping system and a compact 12 mm round form for low cutting forces and reliable chip formation; order directly via Metav Werkzeuge or consult our technical team for system compatibility. RDMA 1203TN UX30 – RDMA1203TN UX30 Tungaloy indexable insert for milling by Tungaloy The RDMA1203TN UX30 Tungaloy indexable insert is a round milling insert engineered for precision milling applications where low cutting forces and controlled chip formation are required UX30 grade for sharp cutting edge Uncoated carbide for low cutting forces 15° relief angle for controlled engagement Round 12 mm insert with cylindrical hole Performance-driven compatibility for productive milling The RDMA1203TN indexable insert is designed specifically for use in compatible Tungaloy milling systems; the insert form, seating geometry and milling body must be technically matched to ensure correct clamping and cutting behaviour. The combination of a round 12 mm form and a cylindrical hole provides reliable mechanical engagement with a screw clamp, while the moderate 3.18 mm thickness contributes to a balance between rigidity and indexability. For workshop planners and process engineers, this means a straightforward replacement routine and predictable behaviour when the insert is mounted in the appropriate milling body. Controlled cutting with low forces and consistent chips The UX30 uncoated carbide grade features a sharp cutting edge tailored for operations where reduction of cutting forces and good chip formation are priorities. Being uncoated, the cutting edge delivers immediate sharpness and reduces the tendency for built-up edge in suitable materials, supporting stable cutting at moderate feeds and depths. In practical terms, this leads to improved surface finish, lower spindle loads and often extended tool life through reduced mechanical stress. The 15° relief angle assists in controlled entry and exit behaviour, beneficial for plan, shoulder and contour milling tasks. Integration into varied milling tasks and simple logistical handling This round insert is suitable for a range of milling tasks — from plan milling and shoulder milling to slot, high-feed and contour milling, depending on the assigned tool family and milling body. The geometry supports multi-edge indexing where the toolholder system allows, reducing tool inventory turnover and simplifying logistics. Note that optimal performance depends on correct matching of the insert seat, geometry and the milling body; manufacturers’ mounting specifications should be observed. For procurement teams, the compact size and standardised ISO designation make it easy to harmonise with existing stocks and replace worn inserts without lengthy requalification. For availability and technical advice on Tungaloy RDMA1203TN UX30 indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6805882 Manufacturer SKU: TUN6805882 Our SKU: 6805882-Tungaloy Model series: milling indexable inserts Facts Insert diameter: 12 mm Thickness: 3.18 mm Relief angle: 15° ISO designation: 1203TN Special features Uncoated carbide material Grade: UX30 Round insert form Cylindrical hole for screw clamping Suitable for plan, shoulder, slot, high‑feed and contour milling depending on tool family Sharp cutting edge for low cutting forces and good chip formation FAQ What milling operations is this insert intended for? This insert is intended for a range of milling operations — plan, shoulder, slot, high‑feed and contour milling — depending on the assigned tool family and the compatible milling body used with the RDMA1203TN UX30 indexable insert. What material and grade does the insert use? The RDMA1203TN is manufactured from uncoated carbide and supplied in the UX30 grade, chosen for its sharp cutting edge and suitability where low cutting forces and consistent chip formation are required. How is the insert clamped in the toolholder? The insert features a cylindrical hole designed for screw clamping; correct seating geometry and a matching milling body are essential for secure clamping and optimal performance with the RDMA1203TN. What dimensions and designation are relevant for ordering? Key ordering details are the 12 mm round form, 3.18 mm thickness, 15° relief angle and the ISO designation 1203TN; the manufacturer article number is 6805882. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMT 1204ZD AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a wear- and breakage-resistant AH120 grade, PVD-coated cemented carbide and a precise round form to secure consistent tool life and process reliability in milling. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application guidance. RDMT 1204ZD AH120 — indexable milling insert for milling (Tungaloy) RDMT1204ZD AH120 indexable insert for secure, high-reliability milling in compatible Tungaloy systems PVD-coated AH120 grade for milling Round 12 mm insert for versatile mounting 4.76 mm thickness, 15° relief Cylindrical hole with single-side countersink Outstanding wear resistance and consistent cutting performance The PVD-coated cemented carbide composition of this insert delivers a balance between toughness and edge stability that reduces unplanned tool changes. The AH120 grade is specified for applications where a sharp cutting edge and high process security are required; this leads to more predictable flank wear and fewer interrupted cycles. When used in appropriate milling bodies, the insert supports steady metal removal rates and helps maintain dimensional accuracy across longer production runs. Clear fitment and secure clamping for repeatable results Compatibility is crucial: the insert seat, geometry and milling cutter must match exactly for safe operation. The round form with a 12 mm diameter and 4.76 mm thickness provides straightforward seating, while the one-sided chipbreaker helps direct chips reliably. The central cylindrical hole with a single-sided countersink (40°–60°) ensures stable clamping in tool bodies designed for this style of insert, reducing the risk of micro-movements and improving repeatability in serial machining. Broad milling applications with process-focused design This indexable insert is intended for a range of milling tasks including face, shoulder, slot, high-feed and contour milling, depending on the assigned cutter family. The combination of a sharp edge geometry and AH120 wear properties offers an advantage when machining materials that demand both edge integrity and consistent chip formation. Selecting the insert as part of a matched Tungaloy system simplifies tool selection and supports efficient production planning with fewer changeovers. For application advice or to order RDMT 1204ZD AH120 inserts, contact Metav Werkzeuge; technical consultants are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to confirm system compatibility and optimal operating parameters. Technical data Article number: 6810230 SKU: 6810230-Tungaloy Manufacturer SKU: TUN6810230 Model series: Fräswendeschneidplatten Insert designation: RDMT1204ZD Material: cemented carbide Facts Insert size: 12 mm Thickness: 4.76 mm Relief angle: 15° Hole: with hole Free angle: 15° Special features Coating: PVD Grade: AH120 Form: round Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Typical application: face, shoulder, slot, high-feed and contour milling System requirement: matching insert seat, geometry and milling body FAQ What is the primary advantage of the AH120 grade? The AH120 grade provides a wear- and breakage-resistant PVD-coated cemented carbide that maintains a sharp cutting edge and delivers improved process security for milling operations. Can the RDMT1204ZD insert be used in any milling body? The insert is intended for use in Tungaloy milling systems where the insert seat, geometry and cutter body are technically matching; secure clamping and correct seat geometry are essential for safe operation. What are the key dimensions to check when selecting the insert? Check the insert diameter (12 mm), thickness (4.76 mm), relief angle (15°) and the hole style (cylindrical hole with single-sided countersink) to ensure compatibility with the cutter body. Which milling tasks suit this insert best? This insert is suitable for face milling, shoulder milling, slotting, high-feed milling and contouring when used within the correct tool family and operating parameters. Does the insert include a chipbreaker and what is its purpose? Yes, the insert has a one-sided chipbreaker designed to control chip flow and improve evacuation, which supports consistent surface finish and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMT 1204ZD AH140 Wendeplatten - Tungaloy
Reliable wear resistance and a sharp cutting edge combine to deliver stable, repeatable milling results; the PVD-coated carbide AH140 grade extends tool life while maintaining process security. Order genuine Tungaloy inserts via Metav Werkzeuge or consult our specialists for system compatibility. RDMT 1204ZD AH140 RDMT milling insert by Tungaloy — PVD-coated carbide, with cylindrical hole RDMT1204ZD AH140 is a round indexable milling insert designed for Tungaloy milling systems, intended for face, shoulder, slot, high-feed and contour milling where a sharp edge and process security are required PVD-coated carbide grade AH140 15° relief angle for secure cutting Cylindrical hole with 40°–60° countersink One-sided chipbreaker for stable chips Durable coating and substrate for extended running time The combination of a PVD-coated cemented carbide substrate and the AH140 grade provides a balance of wear resistance and chipping resistance that supports high‑productivity milling. This composition reduces flank wear and preserves a sharp cutting edge over longer cycle times, which in turn helps to maintain a consistent surface finish and lower tool consumption. The result is measurable process stability and lower total tool cost per component when integrated into a compatible milling cutter. Geometry engineered for reliable clamping and chip control The round insert geometry with a cylindrical hole and one-sided countersink (40°–60°) ensures positive location and repeatable clamping in Tungaloy tool bodies; note that plate seat, geometry and cutter body must be technically matched for correct fit. The 15° relief angle and single-sided chipbreaker control chip formation for a predictable evacuation path, reducing the risk of built-up edge and unexpected breakouts. A plate thickness of 4.76 mm and a plate size of 12 mm provide a robust interface between insert and tool body, aiding rigidity in interrupted or high‑feed cuts. Suited to a wide range of milling operations with clear system benefits This insert is intended for a variety of milling tasks — from face and shoulder milling to slotting, high‑feed operations and contouring — depending on the assigned tool family. The RDMT1204ZD configuration supports efficient chip control and stable cutting even where repeated indexing is required. Using a grade tailored for milling minimises downtime from insert failure and supports predictable tool change intervals. For production environments demanding repeatability and consistent surface quality, the geometry and coating deliver the operational reliability required for continuous manufacturing. Discuss application requirements and order genuine Tungaloy RDMT1204ZD AH140 inserts through Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and ordering information Technical Data Article number: 6820673 SKU: 6820673-Tungaloy Manufacturer SKU: TUN6820673 Manufacturer: Tungaloy Model series: Fräswendeschneidplatten Core data Plate size: 12 mm Plate thickness: 4.76 mm Relief angle: 15° Countersink angle: 40°–60° Hole: with hole Special features Shape: round Grade/coating: AH140, PVD-coated cemented carbide Chipbreaker: one-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: milling System note: for Tungaloy milling systems; plate seat and geometry must match FAQ What milling operations is this insert suitable for? The RDMT1204ZD AH140 milling insert is suitable for face, shoulder, slot, high‑feed and contour milling when used in compatible Tungaloy tool bodies. How does the AH140 grade affect performance? The AH140 grade with PVD coating provides high wear and chipping resistance, helping the insert maintain a sharp cutting edge and delivering consistent results across longer runs. Is a specific cutter body required for these inserts? The insert seat, geometry and cutter body must be technically matched; the RDMT1204ZD is designed for use in Tungaloy milling systems that accommodate the cylindrical hole and countersink arrangement. What chip control can be expected from the one-sided chipbreaker? The single-sided chipbreaker promotes predictable chip formation and evacuation, reducing the likelihood of built‑up edge and improving process stability in interrupted and continuous cuts. Can the RDMT1204ZD be used in high‑feed milling? Yes — depending on the assigned tool family, this insert can be applied in high‑feed operations where a sharp edge and robust chip control are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMT 1204ZD AH330 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH330 grade, compact 12 mm round geometry and a secure clamping arrangement for consistent milling performance. The insert delivers wear resistance and process reliability for a wide range of milling tasks; order directly via Metav Werkzeuge or request application advice from the consultants. RDMT 1204ZD AH330 round milling insert for milling — Tungaloy RDMT1204ZD AH330 is a PVD-coated carbide round insert designed for use in Tungaloy milling systems for face, shoulder, slot, high-feed and contour milling. PVD-coated AH330 grade for process security Round insert Ø12 mm, thickness 4.76 mm 15° clearance angle for sharp cutting edge Cylindrical hole with one-sided countersink 40°–60° Consistent cutting performance through a wear‑resistant grade The AH330 grade is a PVD-coated carbide composition engineered for wear resistance and reduced chipping during milling. The coating stabilises the cutting edge temperature and improves abrasion resistance, which leads to longer in‑service life of the insert and fewer tool changes. This results in higher machine uptime and a predictable tool‑change interval, improving overall process economy and production planning. Secure clamping and stable engagement for reliable results A cylindrical hole with a one‑sided countersink (40°–60°) provides positive seating and stable clamping in compatible cutter bodies. The 15° clearance angle supports a sharp cutting geometry that reduces cutting forces and promotes a consistent surface finish. Note that insert seating, geometry and the milling body must match technically; the cutting system comprises the milling body, the indexable insert, the clamping screw and, where applicable, a shim or support washer. Compact geometry that balances edge life and versatility The round insert (Ø12 mm, thickness 4.76 mm) supplies multiple cutting edges per index and is suitable for a variety of milling operations depending on the chosen cutter family. The one‑sided chipbreaker helps control chip formation and evacuation during shoulder and contour passes. The small, robust form factor reduces inventory complexity and supports economical machining strategies while maintaining the process security expected from Tungaloy components. For application guidance tailored to the AH330 insert and fast availability, contact Metav Werkzeuge — info@metav-werkzeuge.com or phone +49 2822 7131930 for a technical consultation and order support. Technical data Article number: 6810231 Manufacturer article number: 6810231 SKU: 6810231-Tungaloy Model series: Fräswendeschneidplatten Facts Size: 12 mm Thickness: 4.76 mm Clearance angle: 15° Shape: round Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) ISO designation: 1204ZD Special features Grade: AH330 Coating: PVD Material: carbide Application: milling Chipbreaker: one-sided System components: milling body, indexable insert, clamping screw, possible shim FAQ What materials can this insert machine effectively? The RDMT1204ZD AH330 Tungaloy insert is intended for a broad range of milling tasks where wear resistance and edge stability are required; selection of cutting data should follow the specific workpiece material and machining strategy. How does the AH330 grade improve process security? The AH330 PVD coating enhances abrasion resistance and reduces edge chipping, which increases reproducibility and tool life when the RDMT1204ZD insert is used in correctly matched Tungaloy milling systems. Is this insert compatible with any cutter body? Compatibility requires that the insert seat, geometry and cutter body are technically matching; the RDMT1204ZD form and the specified cylindrical hole with countersink must correspond to the cutter design. What is the purpose of the one‑sided chipbreaker? The one‑sided chipbreaker on the RDMT1204ZD supports controlled chip formation for shoulder, face and contour milling, improving surface finish and chip evacuation under the recommended cutting conditions. Can the insert be indexed to use multiple cutting edges? Yes, the round geometry of the RDMT1204ZD insert provides multiple usable edges; correct indexing extends effective tool life and reduces tooling costs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMT 1204ZD T3130 Wendeplatten - Tungaloy
Taking advantage of the combination of T3130 wear resistance, a cemented carbide substrate and a secure clamping design (cylindrical hole with one-sided countersink) delivers consistent cutting-edge stability and long tool life; order directly via Metav Werkzeuge or consult the technical advisers for system compatibility. RDMT1204ZD T3130 RDMT indexable milling insert by Tungaloy A RDMT1204ZD T3130 indexable insert for milling in Tungaloy systems, designed to provide stable cutting edges and reliable clamping for plan, shoulder, slot, high‑feed and contour milling applications. RDMT format 1204ZD, round 12 mm Tungaloy T3130 grade for milling 15° relief, plate thickness 4.76 mm Cylindrical hole with one-sided countersink Precision and system compatibility that reduces setup risk The round indexable insert is manufactured from cemented carbide, ensuring dimensional stability and consistent wear behaviour under industrial conditions. As part of a matched Tungaloy milling system, the insert’s RDMT1204ZD geometry and the plate seat on the cutter body must correspond exactly; this compatibility avoids incorrect seating, reduces vibration and preserves the stable cutting edge during interrupted or continuous cuts. The clear system match requirement supports predictable tool life and repeatable component quality. Grade performance: designed for balanced wear resistance and toughness The T3130 grade combines resistance to abrasive wear with sufficient toughness to withstand edge loading during heavy engagement cuts. In practice, this means fewer indexings and extended intervals between insert changes, which improves uptime and lowers cost per component. The single‑sided chipbreaker is engineered to control chips at typical feed rates for milling, improving chip evacuation and contributing to a more reliable machining process. Secure clamping and geometry explained for reliable machining A cylindrical hole with a one-sided countersink (40°–60°) provides a precise reference and robust clamping area, reducing micro‑movement under cutting forces. The 15° relief (free angle) ensures the correct cutting‑edge engagement while limiting rubbing on the flank, which helps maintain surface finish and reduces thermal loading on the edge. Together, these features deliver secure clamping and consistent tool behaviour across a range of milling tasks. Practical benefits: process stability and straightforward integration Using this round insert in the correct tool family supports efficient planing, shoulder and slot milling as well as high‑feed and contour operations where the toolholder and insert geometry are matched. The compact 12 mm diameter and 4.76 mm plate thickness allow straightforward integration into small to medium cutter bodies. Overall, the design focuses on preserving edge integrity, simplifying maintenance and promoting predictable production throughput. For application advice or to source genuine Tungaloy RDMT1204ZD T3130 indexable inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for compatibility checks and ordering support. Technical data Article number: 6853825 SKU: 6853825-Tungaloy Manufacturer SKU: TUN6853825 Manufacturer: Tungaloy Model series: Milling indexable inserts Type designation: RDMT1204ZD Material: cemented carbide Facts Plate size: 12 mm Plate thickness: 4.76 mm Relief angle: 15° Countersink angle range: 40°–60° Special features Grade: T3130 Shape: round Chipbreaker: single-sided Hole: with cylindrical hole and one-sided countersink Application: milling (plan, shoulder, slot, high‑feed, contour) Compatibility requirement: matched plate seat and cutter body FAQ Which milling operations suit this insert best? This insert is intended for plan, shoulder, slot, high‑feed and contour milling when used in compatible Tungaloy milling systems; the RDMT1204ZD geometry supports these operations within the assigned tool family. What does the T3130 grade offer in practice? The T3130 grade delivers a balance of wear resistance and toughness, providing stable cutting edges and good stand time for typical milling tasks with the RDMT1204ZD insert. How does the hole and countersink affect performance? The cylindrical hole with one‑sided countersink ensures precise seating and secure clamping, reducing micro‑movement and supporting consistent surface quality under varying cutting forces. Can these inserts be used in non‑Tungaloy holders? Compatibility depends on exact plate seat geometry and clamping design; the RDMT1204ZD insert requires a matching cutter body and clamping arrangement to ensure safe and reliable operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMT 1204ZD UX30 Wendeplatten - Tungaloy
Combining a sharp cutting edge in the UX30 uncoated carbide grade with a 15° clearance angle and a round 12 mm form, this insert delivers low cutting forces and dependable chip control; order the RDMT1204ZD UX30 insert directly via Metav Werkzeuge or consult the technical advisers for recommended tool pairing. RDMT1204ZD UX30 — RDMT indexable insert for milling, Tungaloy The RDMT1204ZD UX30 is an indexable milling insert engineered for face, shoulder, slot, high-feed and contour milling within Tungaloy milling systems, requiring compatible insert seat, geometry and clamping components. Sharp-edge uncoated carbide UX30 15° clearance angle for smooth cutting Round 12 mm insert with 4.76 mm thickness System compatibility ensures secure clamping and predictable results The insert is designed as part of a complete milling system, where the insert seat, geometry and cutter body must match to achieve repeatable performance. The combination of a central hole with a cylindrical bore and single‑side countersink (40°–60°) secures the insert under the clamping screw and, together with the appropriate shim, prevents micro‑movement during heavy engagement. This system‑level approach reduces the risk of chatter, simplifies index changes and supports consistent dimensional accuracy on successive parts. Efficient cutting with low forces and controlled chips The UX30 grade is an uncoated carbide formulated for a sharp cutting edge and good chip formation; when paired with the one‑sided chipbreaker, the result is stable, narrow chips and reduced cutting forces. Lower forces translate into less tool deflection and improved surface finish in sensitive milling operations. The engineered chip control also aids chip evacuation in pocketing and contouring tasks, which in turn contributes to longer usable insert life and fewer unplanned interruptions. Geometry and design for durable, repeatable performance A 15° clearance angle minimises flank contact and helps maintain a cool, efficient cut, while the 4.76 mm thickness provides the rigidity required for interrupted cuts. The round 12 mm configuration offers polyvalent engagement for varied milling strategies and permits multiple indexing positions, increasing the number of effective cutting edges per insert. Together these geometric elements provide mechanical stability and predictable wear behaviour under standard industrial conditions. Application focus and practical advantages in production Optimised for milling duties where low cutting forces and reliable chip behaviour are priorities, this insert suits a wide range of face, shoulder, slot, high‑feed and contour milling tasks within the corresponding milling bodies. As an indexable insert for Tungaloy systems, it supports rapid edge replacement without regrinding, contributing to quicker tool changeover and high shop‑floor uptime. The uncoated nature of the grade makes it straightforward to pair with appropriate feeds and speeds for specific materials and cutting strategies. For operations prioritising controlled chip formation and reduced cutting forces, contact Metav Werkzeuge to secure genuine Tungaloy RDMT1204ZD UX30 inserts or request application advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6811360 Manufacturer SKU: TUN6811360 SKU: 6811360-Tungaloy Model series: Fräswendeschneidplatten Material: Carbide Facts Insert designation (ISO): RDMT1204ZD Size: 12 mm Thickness: 4.76 mm Clearance angle: 15° Hole: with hole — cylindrical hole + single‑side countersink (40°–60°) Shape: round Special features Grade: UX30 (sharp cutting edge, uncoated carbide) Chipbreaker: one‑sided Typical use: face, shoulder, slot, high‑feed and contour milling System: for Tungaloy milling systems; matching seat and geometry required FAQ What advantage does this insert bring to milling operations? The RDMT1204ZD UX30 insert offers reduced cutting forces and improved chip control through its sharp UX30 grade and one‑sided chipbreaker, delivering steadier performance and improved surface quality. Which milling systems are compatible with this insert? This insert is intended for use in Tungaloy milling systems; the insert seat, geometry and cutter body must be technically compatible and secured with the clamping screw and any required shim. Is the UX30 grade coated? No — the UX30 used for this insert is an uncoated carbide grade designed for a sharp cutting edge and favourable chip formation. For which milling operations is the RDMT1204ZD best suited? The design targets face, shoulder, slot, high‑feed and contour milling tasks where low cutting forces and reliable chip evacuation are important considerations. How does the insert design contribute to repeatability on the shop floor? The combination of a central hole with cylindrical bore and single‑side countersink, along with the robust 4.76 mm thickness and 15° clearance, ensures secure seating and reduced micro‑movement, supporting consistent part quality over multiple indexings. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMT 1606ZD AH120 Wendeplatten - Tungaloy
Combining the AH120 PVD-coated carbide with a one-sided chipbreaker and precise seat geometry ensures consistent process stability and a sharp cutting edge for demanding milling tasks. Order via Metav Werkzeuge or consult the technical team for application-specific recommendations. RDMT1606ZD AH120 indexable insert for milling — Tungaloy RDMT1606ZD AH120 is an indexable insert designed for Tungaloy milling systems, engineered to deliver wear-resistant cutting edges and reliable chip control across a wide range of milling operations. PVD-coated AH120 for durable edges One-sided chipbreaker for controlled chips Round 16 mm plate, 6.35 mm thick Cylindrical hole with 40°–60° countersink Outstanding wear resistance that keeps production running The AH120 grade is a PVD-coated carbide specifically formulated for wear and breakage resistance during milling. Its coating reduces flank and crater wear while preserving a sharp cutting line, which leads to longer effective tool life and fewer interruptions for insert changes. For production-oriented shops, this translates into improved machine utilisation and steadier cycle times, because the cutting edge sustains performance over repeated operations. Secure seating and consistent clamping for repeatable results The insert is produced with a round form and a cylindrical hole plus a single-sided countersink (40°–60°) to match Tungaloy cutter bodies precisely. This combination ensures correct seating and reduced radial runout, contributing to repeatable dimensional accuracy and surface finish. The geometry requirement—that the insert seat, geometry and cutter body are technically compatible—means a matched system reduces vibration and supports predictable tool life. Versatile use across common milling operations Designed for general milling tasks, the insert covers planing, shoulder, groove, high‑feed and contour milling depending on the assigned tool family. The one-sided chipbreaker promotes controlled chip formation in interrupted and continuous cuts, and the 15° relief angle supports sharp engagement with the workpiece. With a nominal plate diameter of 16 mm and a thickness of 6.35 mm, the insert is suited to robust cutter bodies where secure clamping and edge strength are required. Contact Metav Werkzeuge for application advice, availability and ordering of the Tungaloy RDMT1606ZD AH120 indexable insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6805883 Manufacturer SKU: TUN6805883 Item SKU: 6805883-Tungaloy Model series: Milling indexable inserts Material: carbide Facts ISO designation: 1606ZD Plate size: 16 mm Plate thickness: 6.35 mm Relief angle: 15° Countersink angle: 40°–60° Special features PVD-coated carbide grade AH120 One-sided chipbreaker Round plate form Cylindrical hole with one-sided countersink Suitable for plan, shoulder, groove, high‑feed and contour milling Designed for use in Tungaloy milling systems Plate, geometry and cutter body must be technically matched FAQ Is the RDMT1606ZD AH120 compatible with all Tungaloy cutter bodies? Compatibility depends on the cutter body seat and geometry; the RDMT1606ZD AH120 is intended for use where the insert seat, geometry and cutter body are technically matched, ensuring proper clamping and performance. What benefits does the AH120 coating provide? The AH120 PVD coating on this indexable insert improves wear resistance and edge strength, supporting longer tool life and consistent cutting behaviour under typical milling conditions. Which milling operations suit this insert best? The insert is suitable for planing, shoulder, groove, high‑feed and contour milling when paired with the appropriate Tungaloy cutter family and setup. How does the one-sided chipbreaker affect chip control? The one-sided chipbreaker on this insert promotes controlled chip formation for reliable evacuation and improved surface finish in both continuous and interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMT 1606ZD AH130 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide AH130 and a stable clamping hole with countersink to secure consistent cutting performance in milling applications; order the inserts directly via Metav Werkzeuge or consult the specialists for selection support. RDMT 1606ZD AH130 Tungaloy indexable insert for milling — PVD‑coated carbide, cored with countersink RDMT1606ZD AH130 is an indexable insert developed for reliable face, shoulder and contour milling within Tungaloy milling systems, offering a wear‑resistant grade for secure, repeatable machining. PVD‑coated carbide, grade AH130 15° clearance angle for stable cutting Cylindrical hole with 40°–60° countersink Round 16 mm insert, 6.35 mm thickness Stable performance for productive milling cycles The RDMT1606ZD AH130 insert is engineered to deliver predictable metal removal thanks to its PVD‑coated carbide body and the AH130 grade. The PVD coating enhances wear resistance and helps maintain a sharp cutting edge under interrupted cuts, while the substrate carbide provides toughness against chipping. For operations such as face milling, shoulder milling and high‑feed passes, this combination reduces tool changes and supports higher material removal rates. The described design yields a favourable cost‑per‑part in medium to high‑volume production. Secure seating and reliable clamping reduce downtime A central design focus is clamping stability: the insert has a cylindrical hole with a single‑side countersink (40°–60°) which centres the insert and prevents lateral play during heavy engagement. The 15° clearance angle improves chip evacuation and reduces rubbing on the flank, maintaining surface finish quality. Together, these features shorten set‑up time and limit the need for rework, increasing process uptime and reproducibility on compatible Tungaloy tool bodies. Practical adaptability across common milling tasks The round 16 mm size and 6.35 mm thickness offer a compact geometry that suits a range of cutter families while still providing sufficient edge strength for interrupted cuts. The one‑sided chipbreaker supports controlled chip formation for many aluminium and steel machining tasks, improving surface integrity and machine tool cleanliness. The insert’s round shape also benefits corner‑engaging and profiling passes where constant cutting edge contact is required. Why the AH130 grade matters in production The AH130 grade is formulated for a balance of wear resistance and edge toughness, making it appropriate where a sharp cutting edge and process security are both required. In practice, this means reduced micro‑chipping, extended edge life in mixed batch runs and steadier dimensional outcomes. For workshops seeking consistent results across varied workpiece materials, the AH130 grade helps lower variance in tool life and contributes to predictable planning of maintenance intervals. For reliable milling performance with a Tungaloy AH130 insert, contact Metav Werkzeuge to specify RDMT 1606ZD inserts for the intended cutter family or to arrange selection advice; Metav Werkzeuge can be reached by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Manufacturer article number: 6863137 Manufacturer SKU: TUN6863137 Our SKU: 6863137-Tungaloy Model series: Fräswendeschneidplatten Grade: AH130 Core dimensions Insert designation: RDMT1606ZD Insert size: 16 mm Thickness: 6.35 mm Clearance angle: 15° Hole: with hole Design & special features PVD‑coated carbide Round insert Cylindrical hole with 40°–60° countersink One‑sided chipbreaker For Tungaloy milling systems FAQ What milling operations suit this insert? The RDMT1606ZD AH130 indexable insert is suitable for face‑, shoulder‑ and contour milling within compatible Tungaloy milling systems, providing stable cutting across interrupted and continuous passes. Which materials can be machined with this grade? The AH130 grade on this Tungaloy insert performs well on a broad range of materials where a sharp edge and process security are required; typical applications include general steel and alloy machining under medium cutting conditions. How does the insert’s hole and countersink benefit clamping? The cylindrical hole combined with a 40°–60° single‑side countersink centres the insert and reduces lateral movement, ensuring secure clamping and consistent positioning during machining with the RDMT1606ZD. Is this insert compatible with standard Tungaloy milling bodies? Compatibility requires matching insert seat, geometry and cutter family; the RDMT1606ZD AH130 is designed for Tungaloy milling systems and should be used with bodies specified for RDMT‑style round inserts Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
RDMT 1606ZD AH140 Wendeplatten - Tungaloy
Take advantage of the AH140 PVD coating and the round RDMT geometry to secure consistent edge life and predictable chip control in milling processes; order through Metav Werkzeuge or consult our specialists for compatibility checks. RDMT 1606ZD AH140 indexable insert for milling — Tungaloy The RDMT1606ZD AH140 is a PVD-coated cemented-carbide indexable insert engineered for milling applications such as face, shoulder and high-feed operations, requiring a matching seat and cutter body. PVD-coated AH140 for wear resistance Robust cemented-carbide substrate Round 16 mm form with 6.35 mm thickness Single-sided chipbreaker for reliable chips Cylindrical hole with 40°–60° countersink Reliable performance for industrial milling operations The combination of a defined round form and a controlled chip geometry delivers stable cutting engagement and reduced variability in cycle times. Designed for integration into Tungaloy milling systems, this insert ensures the correct contact between the insert seat and cutter body, which in turn maintains machining repeatability and minimises unplanned downtime. The construction prioritises process reliability, enabling shops to standardise holders and inserts across production runs for predictable outcomes. High edge stability for prolonged productive life A PVD-coated AH140 grade applied to a hard cemented-carbide substrate provides a balance of wear resistance and edge toughness. The coating reduces adhesive and abrasive wear mechanisms, while the substrate resists chipping under interrupted cuts. This results in a longer effective edge life and fewer indexing cycles. In practical terms, the surface finish and dimensional stability of machined components improve, making the insert a cost-effective choice for volume milling where a sharp cutting edge and process security are required. Geometry and chip control that simplifies machining The insert’s single-sided chipbreaker and cylindrical hole with a 40°–60° countersink promote consistent chip formation and evacuation, helping to avoid recutting and reducing heat concentration at the cutting zone. The 15° clearance and a nominal size of 16 mm with a thickness of 6.35 mm produce a secure clamp and stable cutting forces, which supports predictable tool life and surface quality. Clear chip control reduces the need for secondary cleanup and supports higher metal removal rates when paired with appropriate feeds and speeds. Practical applications and measured benefits on the shop floor Intended for a wide range of milling tasks — face milling, shoulder milling, slotting, high-feed and contour operations depending on the assigned tool family — this insert brings immediate benefits in terms of repeatability and edge security. Compatibility with Tungaloy milling bodies and the requirement that seat, geometry and milling body match technically ensures the insert performs as specified, delivering consistent surface quality and enabling productivity gains without additional process complexity. Contact Metav Werkzeuge for application advice, compatibility checks and to confirm suitability for specific milling tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6820674 Manufacturer SKU: TUN6820674 SKU: 6820674-Tungaloy Model series: Milling indexable inserts Designation: RDMT1606ZD AH140 Facts Size: 16 mm Thickness: 6.35 mm Clearance angle: 15° Tool angle: 0° Special features Material: cemented carbide Coating: PVD (AH140) Shape: round Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: milling (face, shoulder, slot, high-feed, contour) Insert family: RDMT series for Tungaloy milling systems FAQ Which materials is this insert suited for? The RDMT1606ZD AH140 insert is a PVD-coated cemented-carbide grade designed primarily for general milling tasks; it performs well across a broad range of common engineering materials when paired with suitable cutting data. Is the insert compatible with existing Tungaloy milling bodies? Compatibility requires a matching insert seat and cutter geometry; the RDMT1606ZD AH140 is intended for Tungaloy milling systems where the plattensitz, geometry and milling body are technically aligned. What benefits does the AH140 coating provide? The AH140 PVD coating increases wear resistance and improves edge stability under intermittent cutting conditions, which helps to extend the usable life of the insert and maintain surface finish. How does the chipbreaker influence machining? The single-sided chipbreaker on this insert supports uniform chip formation and evacuation, reducing recutting and helping to maintain stable cutting temperatures and consistent surface quality. What should be checked before fitting the insert? Verify that the insert designation RDMT1606ZD matches the cutter pocket geometry and that clamping screws and any underlay are compatible to ensure secure seating and correct axial position. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMT 1606ZD AH330 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH330 carbide for enhanced wear resistance and a 15° clearance angle that supports a sharp, stable cutting edge; the round Ø16 insert with 6.35 mm thickness and a cylindrical hole with 40°–60° countersink ensures consistent clamping and reliable chip control. Order the RDMT1606ZD AH330 Tungaloy insert directly via Metav Werkzeuge or consult the technical advisers for precise application matching. RDMT1606ZD AH330 RDMT milling insert by Tungaloy — PVD carbide, Ø16, 15° clearance RDMT1606ZD is a round indexable insert for milling, developed for stable cutting performance in Tungaloy milling systems and suitable for plan, shoulder, slot, high-feed and contour milling depending on the cutter family PVD-coated carbide AH330 for wear resistance Round insert Ø16 with 6.35 mm thickness 15° clearance angle for a sharp cutting edge Cylindrical hole with 40°–60° one-sided countersink Proven wear resistance that keeps production moving The AH330 PVD coating on a carbide substrate provides a balance of wear resistance and edge stability that reduces the frequency of insert changes and helps maintain consistent surface finish over longer runs. This grade is formulated to resist chipping under interrupted cuts and to preserve a sharp cutting edge where process security is required. By limiting flank wear and maintaining edge form, the grade contributes to predictable tool life and smoother planning of maintenance cycles, which supports higher machine utilisation and lower overall machining costs. Mechanical fit and geometry for repeatable clamping A secure mechanical interface is essential for consistent results. The round Ø16 geometry combined with a 6.35 mm thickness, a 15° clearance angle and a cylindrical mounting hole with a one-sided countersink (40°–60°) ensures reliable seating in compatible cutters. The single-sided chipbreaker helps control chip flow on the active cutting edge, reducing built-up edge and improving evacuation in interrupted or heavy cuts. These features reduce vibration and repetitive positional variance, delivering repeatable component tolerances and fewer scrap parts. Versatility across milling operations with system-matched performance Designed for a broad range of milling operations — planing, shoulder, slotting, high-feed and contouring — the insert offers flexibility when paired with the appropriate cutter body. The RDMT1606ZD AH330 Tungaloy insert is intended for use within Tungaloy milling systems; insert seat, geometry and cutter body must match to achieve the specified performance. When the system match is ensured, the combination yields improved surface quality and stable cutting behaviour, enabling efficient transition between roughing and finishing strategies with minimal compromise. Selection guidance and practical handling for reliable results Selection should focus on matching the insert grade and geometry to the workpiece demands and the cutter body design. The carbide substrate with PVD AH330 coating is suited to operations where a sharp edge and resistance to fracture are priorities. For best results, confirm cutter compatibility and adhere to recommended speeds and feeds for the chosen material and operation type. Proper storage and gentle handling of indexable inserts preserve the cutting edge and coating integrity, while regular inspection of the seat and clamp reduces the risk of mislocation and uneven wear. Contact Metav Werkzeuge for expert matching and procurement of Tungaloy RDMT1606ZD AH330 inserts — our consultants assist with cutter compatibility and application parameters Technical data Article number: 6805884 SKU: 6805884-Tungaloy Manufacturer item number: TUN6805884 Model series: milling indexable inserts Core specifications Insert designation: RDMT1606ZD Size: 16 mm Thickness: 6.35 mm Clearance angle: 15° Hole: with hole Countersink: 40°–60° Shape: round Chipbreaker: single-sided Materials & special features Substrate: carbide Coating: PVD AH330 Typical applications: plan, shoulder, slot, high-feed and contour milling System compatibility: for use in Tungaloy milling systems; insert seat, geometry and body must match FAQ What milling tasks is this insert intended for? The insert is intended for plan, shoulder, slot, high-feed and contour milling; the grade and geometry suit a range of operations depending on the assigned cutter family. Which cutters are compatible with this insert? Compatibility requires a Tungaloy milling system where the insert seat, geometry and cutter body are technically matched; correct matching ensures reliable clamping and repeatable performance. How does the AH330 grade improve process security? The PVD AH330 coating on a carbide substrate provides wear and fracture resistance, maintaining a sharp edge and improving stability under interrupted cuts, which enhances process security. What mounting and dimensional details are important for setup? Key dimensions: Ø16 insert size, 6.35 mm thickness, 15° clearance, cylindrical hole with one-sided countersink (40°–60°). These specifications support secure mounting and consistent chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMT 1606ZD T3130 Wendeplatten - Tungaloy
Take advantage of the combination of T3130 carbide grade, secure clamping features and a 15° relief angle for reliable, productive milling. Order genuine inserts via Metav Werkzeuge or consult their team for system matching and supply. RDMT1606ZD T3130 indexable insert for milling – Tungaloy The RDMT1606ZD T3130 is a round indexable insert designed for milling operations in Tungaloy milling systems, combining wear resistance, edge stability and a single-sided chipbreaker for predictable metal removal. Tungaloy T3130 grade for wear resistance Round 16 mm form, 6.35 mm thickness Cylindrical hole with single-sided countersink 15° relief angle for stable cutting Higher throughput through a wear-resistant cutting grade The combination of the T3130 carbide grade and the insert geometry delivers a measurable increase in sustained cutting performance for milling tasks. The specially chosen grade enhances wear resistance and edge stability, which reduces the frequency of indexable insert changes and helps to maintain consistent component tolerances. In production environments where tool-change time and repeatability affect cycle time, this behaviour translates into improved process efficiency and predictable costs per part. Secure clamping and repeatable seating for system safety Designed for use within compatible Tungaloy tool bodies, the insert requires correct seat geometry and matching clamping hardware to function as intended. The cylindrical hole with single-sided countersink (40°–60°) ensures a precise seating and reliable torque transfer from the clamp, resulting in repeatable positioning and a steady cutting edge during interrupted or high-feed milling. Correct assembly of insert, screw and pocket is critical to achieve the rated performance across applications. Machining stability and chip control for cleaner processes The single-sided chipbreaker and the 15° relief angle work together to shape chip flow and reduce edge loading, especially in shoulder, slot and contour milling operations. The round 16 mm form and 6.35 mm thickness contribute to mechanical rigidity, lowering the risk of vibration and edge chipping under moderate to heavy axial engagement. For workshop personnel unfamiliar with chipbreaker functions: the geometry diverts and segments chips to protect the cutting edge and assist coolant access, improving surface finish and tool life. Flexible use across typical milling applications This insert is tailored for a range of milling tasks—face milling, shoulder milling, slotting, high-feed and contour milling—depending on the associated tool family. The product specification emphasises a balance of toughness, wear resistance and edge stability rather than a single specialised attribute, making it suitable where consistent performance and straightforward tool management are priorities. System compatibility remains decisive: the cutting body, insert seat and clamp must match the insert's ISO and form designation for safe operation. For reliable system matching, supply of genuine Tungaloy inserts and technical advice contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6853826 Manufacturer SKU: TUN6853826 Supplier SKU: 6853826-Tungaloy Designation: RDMT1606ZD Grade: T3130 Model series: milling indexable inserts Material: carbide Application: milling Facts Diameter: 16 mm Thickness: 6.35 mm Relief angle: 15° Countersink angle: 40°–60° ISO designation: 1606ZD Special features Round insert form Cylindrical hole with single-sided countersink Single-sided chipbreaker Balanced grade for wear resistance and toughness Intended for Tungaloy milling systems; seat and geometry must match Suitable for face, shoulder, slot, high-feed and contour milling depending on tool family FAQ What milling operations are suitable for this insert? The RDMT1606ZD T3130 indexable insert is intended for face, shoulder, slot, high-feed and contour milling depending on the associated tool family and clamping arrangement. How does the T3130 grade affect performance? The T3130 grade provides a balance of wear resistance and toughness, which helps the insert maintain a stable cutting edge and extend useful life during typical milling duties. Why is the cylindrical hole with countersink important? The cylindrical hole with a single-sided countersink (40°–60°) ensures accurate seating and secure clamping in the pocket, improving repeatability and reducing the risk of insert movement during heavy or interrupted cuts. Is special tooling required to use this insert? No special tooling beyond a compatible Tungaloy milling body, correct clamping screw and matching seat geometry is required; correct system matching is essential for safe, repeatable performance. What are the key dimensional specifications to check before fitting? Check the insert diameter (16 mm), thickness (6.35 mm), relief angle (15°) and ISO designation (1606ZD) to ensure proper fit with the milling body and clamp. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMT 1606ZD UX30 Wendeplatten - Tungaloy
Take advantage of the combination of sharp cutting geometry, UX30 cemented carbide and secure clamping for reliable, low‑force milling. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. RDMT 1606ZD UX30 RDMT indexable insert for Milling — Tungaloy RDMT1606ZD UX30 is an indexable insert engineered for general milling tasks where low cutting forces and controlled chips are required. UX30 grade for sharp cutting edge Round 16 mm insert, 6.35 mm thick Single-sided chipbreaker for controlled chips With cylindrical hole and countersink 40°–60° Higher machining efficiency through low cutting forces The combination of the UX30 grade and uncoated cemented carbide substrate provides a sharp cutting edge designed to reduce cutting forces during light to moderate milling. Lower forces translate into improved tool life of the cutting body, reduced spindle load and the potential for higher feed rates on light cuts. For operations such as face, shoulder and slot milling, this geometry supports stable material removal while keeping power consumption moderate. The technical design intentionally emphasises good chip formation, which reduces the risk of re-cutting and improves surface appearance. Secure system fit and straightforward integration This insert is made for Tungaloy milling systems and requires matching insert seat, geometry and cutter body to ensure correct clamping and repeatability. The round 16 mm form with a 6.35 mm thickness and 15° clearance angle enables simple seating and rotation for multiple index positions. The cylindrical hole with a one‑sided countersink (40°–60°) ensures consistent clamping force and reliable seating accuracy in the cutter body. Clear system compatibility reduces setup time and supports reproducible machining results in series production. Chip control and surface consistency for predictable results A single-sided chipbreaker on the insert concentrates chip flow and reduces entanglement in many materials. The sharp uncoated edge suits applications where low cutting forces are prioritised and where coolant strategies or machine rigidity control temperatures and tool wear. Proper chip evacuation means fewer interruptions and more consistent part quality, especially on operations that demand repeatable surface finish and dimensional stability. When this insert is the right choice Select this round indexable insert when the application calls for gentle cutting action and dependable chip control across a range of milling tasks. The uncoated cemented carbide and UX30 micro‑geometry are particularly useful where edges must remain sharp for fine finishes or when machining softer alloys under controlled cutting parameters. For customers seeking predictable behaviour and easy integration into existing Tungaloy tool systems, this insert offers a balanced, cost‑effective solution. For tailored advice on using Tungaloy RDMT1606ZD UX30 inserts in specific milling applications, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for concise, application‑oriented support and fast availability. Technical data Article number: 6811361 Manufacturer SKU: TUN6811361 SKU: 6811361-Tungaloy ISO designation: 1606ZD Facts Insert diameter: 16 mm Thickness: 6.35 mm Clearance angle: 15° Countersink angle: 40°–60° Style: with hole Special features Grade: UX30 Material: cemented carbide Uncoated cutting edge Single-sided chipbreaker Round insert form Cylindrical hole with one-sided countersink Suitable for milling operations: face, shoulder, slot, high‑feed and contour milling Designed for Tungaloy milling systems FAQ What does UX30 mean for machining performance? The UX30 grade denotes a carbide formulation and edge geometry tuned for a sharp cutting edge; the RDMT1606ZD UX30 insert delivers low cutting forces and improved chip formation for milling tasks. Is this insert compatible with non‑Tungaloy cutter bodies? Compatibility requires matching the insert seat, geometry and clamping system; the RDMT1606ZD form factor is designed for Tungaloy milling systems, so verification of seat geometry is recommended. Which materials suit this insert best? The uncoated cemented carbide composition and single‑sided chipbreaker make this insert suitable for a range of materials where low cutting forces and controlled chips are needed, such as many steels and non‑ferrous alloys. How is the insert clamped in the cutter body? Clamping is achieved via the cylindrical hole with a one‑sided countersink (40°–60°); this arrangement ensures secure seating and repeatable positioning in the cutter assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMW 0501M0 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide and 15° relief for consistent cutting performance and reduced downtime; orderable via Metav Werkzeuge or consult the technical advisors for application matching. RDMW 0501M0 AH120 – Tungaloy indexable milling insert for milling The RDMW0501M0 AH120 is a PVD‑coated carbide indexable insert designed for integration into Tungaloy milling systems, suitable for face, shoulder, slot and high‑feed milling where edge stability and process reliability are required. PVD‑coated carbide AH120 for wear resistance Optimised for shoulder, slot and contour milling Cylindrical hole with one‑sided countersink 40°–60° Plate thickness 1.59 mm; 15° relief angle Reliable cutting performance through optimised material and coating The insert combines a PVD‑coated surface with a tough carbide substrate to deliver high wear resistance and reliable edge retention during interrupted and continuous milling operations. The selected grade is engineered to resist chipping under common milling loads, which translates into longer tool life, fewer indexings and a more predictable production rhythm. This technical combination supports stable cutting conditions and reduces the need for frequent tool changeovers, contributing to consistent component quality and reduced process variability. Accurate seating and secure clamping for repeatable results A well‑matched seat and clamping arrangement are essential for repeatable tool life and dimensional accuracy. The insert features a cylindrical hole with a one‑sided countersink (40°–60°) that ensures positive location on compatible cutter bodies and stable torque transmission from the clamping screw. The 1.59 mm plate thickness and standard 05 size deliver a compact geometry that suits light to medium milling cutters, while the 15° relief angle promotes controlled chip formation and clearances that help prevent rubbing and thermal escalation in the cutting zone. Versatile application range with process security Designed for general milling tasks within the designated system family, the component is suitable for face, shoulder, slot and high‑feed milling depending on the assigned cutter body. The cutting geometry and the AH120 grade aim for process reliability, making the insert a good choice where a sharp cutting edge and resistance to wear and breakage are expected. Absence of a dedicated chipbreaker in this variant means the insert is best paired with cutter bodies and machining parameters that manage chip evacuation effectively; when combined with correct feeds and speeds, the result is efficient material removal and consistent surface condition. For application guidance, cutting data optimisation or to procure original Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical advice and availability Technical Data Article number: 6816350 Manufacturer SKU: TUN6816350 SKU: 6816350-Tungaloy Model series: Fräswendeschneidplatten Label: RDMW0501M0 AH120 Tungaloy‑Wendeplatte Facts Plate thickness: 1.59 mm Relief (free) angle: 15° Corner radius: 0 mm Size: 05 ISO designation: 0501M0 Plating/sort: AH120 Special features Coating: PVD Substrate: carbide Mounting: cylindrical hole with one‑sided countersink (40°–60°) Shape: round plate Chipbreaker: without Typical use: face, shoulder, slot and high‑feed milling within matching Tungaloy cutter systems FAQ What machining tasks suit this insert best? This indexable insert is intended for face, shoulder, slot and high‑feed milling when used in compatible Tungaloy milling systems; the AH120 grade focuses on wear resistance and edge stability. Is the insert compatible with any cutter body? The seating, geometry and clamping require technical compatibility with the cutter body; the insert is made for Tungaloy milling systems that accept the RDMW0501M0 form and the specified mounting hole and countersink. Does this variant include a chipbreaker? This version is supplied without a chipbreaker; chip control depends on the chosen cutter body, cutting parameters and material being machined. Which materials can be machined with this grade? The AH120 PVD‑coated carbide is formulated for broad material coverage with an emphasis on wear and breakage resistance; suitable selection of feeds and speeds is advised for each workpiece material. How is the insert secured on the cutter? The insert locates and clamps via its central cylindrical hole and is designed to work with a clamping screw and, where applicable, a support plate to ensure secure seating and repeatable torque transmission. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
RDMW 0702M0 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH120 for wear resistance, the precise round 07 form with 2.38 mm thickness for secure clamping, and the requirement for matched seating to ensure consistent cutting results; order the insert directly via Metav Werkzeuge or consult our specialists for compatibility and application advice. RDMW 0702M0 AH120 — Tungaloy milling indexable insert (milling) The RDMW0702M0 AH120 is a PVD-coated carbide indexable insert for milling applications, designed for use in Tungaloy milling systems where matching seat, geometry and clamping ensure process reliability. PVD-coated carbide grade AH120 for wear resistance Designed for Tungaloy milling systems and correct seating Rounded 07 shape with 2.38 mm thickness Cylindrical hole with one-sided 40°–60° countersink Boost machining efficiency with a wear-resistant PVD coating The combination of a PVD-coated surface and a carbide substrate provides a robust cutting edge capable of extended performance under continuous milling conditions. The AH120 grade is specified as a wear- and chipping-resistant grade, which means the insert is engineered to maintain a sharp cutting edge and stable performance over repeated indexings. For production-focused shops, this translates into fewer stoppages for insert changes and a steadier component quality; the coating reduces adhesion and thermal wear, while the substrate supports mechanical strength during interrupted cuts. Secure clamping and repeatable accuracy through geometry and hole design Reliable clamping is achieved by the insert’s design: a cylindrical hole with a one-sided 40°–60° countersink mates with the clamping screw and, if required, a backing pad. The round 07 plate form and 2.38 mm plate thickness contribute to uniform seat contact and reduced micro-movement under load. A defined 15° relief angle ensures the cutting edge engages predictably, while the zero corner radius delivers a clean, defined profile for contour and finishing passes. These features are intended to reduce vibration and ensure repeatable positioning every time the insert is indexed. Versatile milling applications with controlled chip behaviour This insert is suitable for a range of milling tasks — planing, shoulder, slot, high-feed and contour milling — depending on the assigned tool family. The AH120 chemistry is geared towards applications where process security and a sharp edge are required simultaneously, so it performs especially well in mixed production environments where surface finish and tool life must be balanced. Note that the insert is supplied without a chipbreaker, which favours uninterrupted cutting geometries and may require consideration of cutting parameters and coolant strategy to manage chip formation effectively. For machining setups that demand consistent edge life and secure clamping, contact Metav Werkzeuge for availability and guidance on integrating the Tungaloy RDMW0702M0 AH120 insert into the correct tool body; email info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and ordering options Technical data Article number: 6816351 SKU: 6816351-Tungaloy Manufacturer SKU: TUN6816351 Model series: Milling indexable inserts Product designation: RDMW0702M0 AH120 Tungaloy insert Core data Thickness: 2.38 mm Size: 07 Free angle: 15° Corner radius: 0 Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Plate form: round Coating / grade: AH120 (PVD) Material: carbide Special features PVD-coated carbide for wear resistance No chipbreaker Suitable for plan, shoulder, slot, high-feed and contour milling For Tungaloy milling systems; matching seat and geometry required System components: milling body, insert, clamping screw and, if applicable, backing pad FAQ What is the coating and substrate of this insert? The RDMW0702M0 AH120 insert is made of carbide with a PVD-coated surface in the AH120 grade, combining mechanical strength with a wear-resistant coating for milling applications. Which milling operations is this insert intended for? The insert is intended for planing, shoulder, slot, high-feed and contour milling depending on the assigned tool family; the RDMW0702M0 AH120 performs where a sharp cutting edge and process security are required. How is the insert secured in the tool body? Clamping is effected via the insert’s cylindrical hole with a one-sided 40°–60° countersink, together with a clamping screw and, if needed, a backing pad to ensure stable seating and repeatable indexing. Is there a chipbreaker on this insert? This insert is supplied without a chipbreaker, which supports uninterrupted cutting geometries; chip control must therefore be managed by cutting parameters and tool body design. Can the RDMW0702M0 AH120 be used in non-Tungaloy bodies? The RDMW0702M0 AH120 is designed for Tungaloy milling systems; the insert seat, geometry and clamping interface must match the tool body to ensure proper function and process security. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMW 1003M0 AH120 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant PVD coating and a precisely specified geometry for reliable milling performance; the round, 10 mm insert with a cylindrical hole and countersink ensures secure clamping and consistent process results. Order compatible inserts or consult Metav Werkzeuge for application support. RDMW 1003M0 AH120 indexable insert for milling (Tungaloy) The RDMW1003M0 AH120 is a round indexable insert for milling, designed as a wear‑resistant PVD‑coated carbide grade for face, shoulder, slot, high‑feed and contour milling applications. PVD-coated carbide for improved wear resistance Designed for Tungaloy milling systems Round insert, 10 mm diameter, 3.18 mm thickness Cylindrical hole with single-sided countersink (40°–60°) Engineered for resilient cutting performance The insert is made from PVD‑coated cemented carbide, grade AH120, offering a balance of wear resistance and chipping toughness that supports stable machining cycles. This material combination preserves a sharp cutting edge under intermittent loads and fluctuating engagement angles, reducing the risk of edge failure. For operations where both a long tool life and process security matter, the coated carbide provides predictable wear behaviour and helps maintain component tolerances over longer tool intervals. The design intent is to reduce unplanned stoppages and contribute to a smoother production flow in high‑mix or batch milling. Secure seating and straightforward assembly for system compatibility Compatibility between insert, seat geometry and milling body is essential: the insert features a round 10 mm form with a cylindrical hole and single‑sided countersink (40°–60°) to match corresponding Tungaloy tool bodies. The through‑hole and chamfered countersink ensure positive centring and consistent clamping force, which in turn preserves the cutting geometry under load. Because the insert has a 0 mm corner radius and a 15° free angle, the seating and toolholder must be selected accordingly; matching the seat profile guarantees repeatable positioning and reliable indexability. This clear mechanical fit lowers setup time and simplifies tool inventory management. Practical benefits for productivity and predictable economics When assigned to the correct tool family, the insert supports a variety of milling tasks — from face and shoulder milling to slotting, high‑feed operations and contour work — delivering process reliability across applications. The AH120 grade is optimised to resist both abrasive wear and edge breakouts, which helps to extend intervals between indexings and reduces overall tooling consumption. In production terms, that means fewer tool changes and improved uptime. Pairing these inserts with appropriate cutting data and coolant strategies will further enhance surface finish and dimensional repeatability, making them a pragmatic choice for manufacturers seeking consistent cycle times and stable part quality. For material pairing advice, milling body compatibility or to secure original Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application‑specific consultation and supply. Technical data Article number: 6816352 SKU: 6816352-Tungaloy Manufacturer SKU: TUN6816352 Brand: Tungaloy Model series: Fräswendeschneidplatten Designation: RDMW1003M0 AH120 Facts Diameter: 10 mm Thickness: 3.18 mm Free angle: 15° Corner radius: 0 Countersink angle: 40°–60° ISO code: 1003M0 Special features PVD‑coated cemented carbide Grade AH120 – wear and chipping resistant For milling operations (face, shoulder, slot, high‑feed, contour) Round insert with cylindrical hole and single‑sided countersink Without chipbreaker FAQ What materials is this insert intended to machine? The RDMW1003M0 AH120 insert is designed as a general‑purpose milling grade; the AH120 formulation targets applications where wear resistance and edge stability are required, making it suitable for a broad range of steels and mixed production workpieces when used within the correct cutting data. How does the insert mount to a milling body? The round form with a cylindrical hole and single‑sided countersink (40°–60°) provides positive centring and clamping; tool bodies in the compatible Tungaloy milling system accept the insert with the specified seating geometry to ensure secure fixation. Is a chipbreaker included on the insert? This item is supplied without a chipbreaker; chip control will depend on the assigned tool family and the selected milling body geometry. What are the key dimensions to check before ordering? Verify the 10 mm diameter, 3.18 mm thickness, 0 mm corner radius and the 15° free angle against the toolholder seat and the intended milling body to ensure correct fit and function. Can this insert be used for high‑feed milling? When assigned to a suitable tool family and holder designed for high‑feed operations, the grade and geometry of the insert can support high‑feed milling, as indicated by its application range; always confirm seat compatibility and recommended cutting parameters. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
RDMW 1204ZD AH120 Wendeplatten - Tungaloy
Take advantage of high process stability and a PVD-coated carbide grade tailored for demanding milling tasks; the robust, round geometry with a central hole and 15° relief ensures a consistently sharp cutting edge. Order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations and delivery options. RDMW 1204ZD AH120 Tungaloy indexable insert – PVD-coated carbide, round form with central hole for milling The RDMW1204ZD AH120 Tungaloy indexable insert is a round milling insert designed for face, shoulder, slot, high-feed and contour milling when used in matching Tungaloy milling bodies PVD-coated carbide AH120 grade Round insert with central hole and countersink 15° relief angle for sharp cutting edge No chipbreaker for uninterrupted cutting Durable coating and grade that stabilise production The AH120 grade is a PVD-coated carbide selected for wear- and chipping-resistant performance in milling operations. This coating enhances edge stability under intermittent or heavy engagement and supports longer tool life by reducing abrasive wear. For manufacturing environments where repeatable quality and fewer tool changes matter, this insert contributes to a steadier production flow and reduced downtime. The specification focuses on reliability and measurable benefits rather than abstract claims. Geometry and clamping that ensure precise compatibility The round geometry with a central hole and a single-side countersink (40°–60°) is intended for secure clamping in compatible milling bodies. A 15° relief angle and a plate thickness of 4.76 mm create a sharp, well-supported cutting edge. It is important that the insert seat, cutter-body geometry and clamping screw are technically matched; incorrect combination can reduce process security and surface quality. This design facilitates versatile positioning for contour and face milling, while the absence of a chipbreaker simplifies chip flow for certain toolholders. Practical advantages in mixed production environments Designed for Tungaloy milling systems, the insert supports a wide range of milling tasks depending on the assigned cutter family. The round shape allows multiple indexing positions, which helps to extend usable edge life and lowers tooling costs per component. The grade performs particularly well where a sharp cutting edge and process security are required together. For shops seeking predictable performance and efficient tool changes, the combination of geometry and coating reduces variability across batches and supports consistent part tolerances. Contact Metav Werkzeuge for tailored application advice on Tungaloy inserts and to request cutting-data sheets quoting SKU TUN6815282 for fast processing Technical Data Article number: 6815282 SKU: 6815282-Tungaloy Manufacturer SKU: TUN6815282 Manufacturer: Tungaloy Model series: Milling indexable inserts Insert designation: RDMW1204ZD Grade/coating: AH120, PVD-coated carbide Material: Carbide Facts Thickness: 4.76 mm Size: 12 mm Relief angle: 15° Countersink angle: 40°–60° Hole: cylindrical with single-side countersink Special features Round insert geometry Central hole for secure clamping No chipbreaker Wear- and chipping-resistant grade for milling Suitable for face, shoulder, slot, high-feed and contour milling Compatible only with matching Tungaloy milling bodies; seat and geometry must correspond FAQ What milling operations is this insert suitable for? The round indexable insert is suitable for face, shoulder, slot, high-feed and contour milling when integrated into the correct Tungaloy milling body; the intended uses are defined by the assigned cutter family. Does the insert include a chipbreaker? No, this insert is supplied without a chipbreaker, providing uninterrupted cutting edges for toolholders designed for free-cut conditions. What are the key geometric specifications to check for compatibility? Check the insert diameter (12 mm), thickness (4.76 mm), the central hole and countersink design, and the 15° relief angle; the seat, geometry and milling body must match to ensure correct clamping and process security. How does the AH120 grade affect performance? The AH120 PVD-coated carbide grade provides enhanced wear and chipping resistance, maintaining a sharp cutting edge and improving repeatable results across production runs. How should one interpret the hole and countersink description? The insert has a cylindrical central hole with a single-side countersink at 40°–60°, designed for positive mechanical clamping in compatible tool bodies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMW 1204ZD AH140 Wendeplatten - Tungaloy
Take advantage of the wear-resistant PVD-coated AH140 grade and the secure clamping via the cylindrical hole with countersink to achieve stable, high-reliability milling results; order directly via Metav Werkzeuge or consult our specialists for application advice. RDMW 1204ZD AH140 indexable milling insert for milling — Tungaloy RDMW 1204ZD AH140 is an indexable milling insert for Tungaloy milling systems, intended for face, shoulder, slot, high-feed and contour milling where a sharp cutting edge and process reliability are required. PVD-coated carbide AH140 for wear resistance Round insert Ø12 mm, 4.76 mm thickness 15° relief angle for versatile cutting Cylindrical hole with 40°–60° countersink High-performance grade for consistent machining results The PVD-coated AH140 grade combines a fine-grained carbide substrate with a robust surface layer to deliver improved wear resistance and edge stability during interrupted and continuous milling. This characteristic reduces tool change frequency and supports a predictable process window, which is particularly valuable in production environments requiring repeatable component quality. The result is a measurable improvement in uptime and component consistency without compromising cutting precision. Geometry and clamping designed for process security The insert's round form with Ø12 mm diameter and 4.76 mm thickness provides a compact, stable contact area that spreads cutting forces and supports high-feed and contour operations. The 15° relief minimises rubbing while maintaining a sharp cutting action, and the cylindrical hole with one-sided countersink (40°–60°) ensures reliable seating and clamping in the toolholder. As this variant is supplied without a chipbreaker, planning for chip evacuation should be considered in the machining strategy to maintain surface quality and tool life. System compatibility and recommended applications This insert is part of a modular milling system and will perform best when the insert seat, geometry and milling body are technically matched. Typical setups include the milling body, the indexable insert, a clamp screw and, where required, a support shim. The grade is optimised for applications that demand a sharp cutting edge and high process security, such as facing, shoulder milling, slotting and high-feed passes. If there is any uncertainty about compatibility or the ideal tool family for a specific task, internal technical advisors can provide tailored recommendations. For secure, high-reliability milling with the AH140 grade, contact Metav Werkzeuge for ordering and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 — our team can confirm fitment and cutting data for the Tungaloy system. Technical data Article number: 6820675 Manufacturer SKU: TUN6820675 Model series: Fräswendeschneidplatten Brand: Tungaloy Material: carbide Facts Diameter: 12 mm Thickness: 4.76 mm Relief angle: 15° ISO designation: 1204ZD Hole style: with hole; cylindrical hole + one-sided countersink (40°–60°) Special features Grade/coating: AH140, PVD-coated Plate form: round Chipbreaker: without chipbreaker Typical use: face, shoulder, slot, high-feed and contour milling System requirement: insert seat and milling body must be technically matched FAQ What applications suit this insert best? The RDMW 1204ZD AH140 indexable milling insert from Tungaloy is designed for face, shoulder, slot, high-feed and contour milling where a sharp cutting edge and process reliability are priorities. Is the AH140 grade suitable for interrupted cuts? Yes, the AH140 PVD-coated carbide grade is formulated to resist wear and chipping, making the RDMW 1204ZD AH140 suitable for many interrupted and continuous milling conditions. How does the round shape affect performance? The round insert geometry spreads cutting forces and supports versatile cutting directions; combined with the insert thickness and relief angle, it enhances stability during high-feed and contour milling operations. What clamping features ensure secure seating? The insert features a cylindrical hole with a one-sided countersink (40°–60°), providing reliable seating and clamp engagement when paired with the correct milling body and clamp screw. Is there a chipbreaker on this insert? This insert is supplied without a chipbreaker; chip control must therefore be managed via cutting parameters, coolant strategy and the chosen toolholder configuration. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMW 1204ZD T3130 Wendeplatten - Tungaloy
Balanced wear resistance and edge stability from the T3130 grade, combined with a round 12 mm form and a cylindrical mounting hole with one-sided countersink, deliver dependable milling performance and predictable tool life; order through Metav Werkzeuge or consult the technical team for precise system matching. RDMW1204ZD T3130 milling insert by Tungaloy The RDMW1204ZD T3130 is a round indexable milling insert engineered for plan, shoulder, slot, high-feed and contour milling within Tungaloy milling systems. Grade T3130 for wear resistance and toughness Round 12 mm insert with 4.76 mm thickness Cylindrical hole with countersink 40°–60° Compatible with Tungaloy milling systems Durable grade for consistent cutting performance The core advantage of the T3130 designation is a balanced blend of wear resistance and toughness achieved through Tungaloy's carbide formulation. This results in stable flank wear progression and reliable edge life under varying cutting conditions. For production environments where repeatability matters, the insert's material properties reduce frequency of regrinds and tool changes, contributing to a smoother machining flow and lower process variance. Design that integrates into systemised toolsets The insert is designed for use in complete milling assemblies: milling body, indexable insert, clamp screw and, where required, a support. Correct seating and matching of insert geometry and cutter body are essential for performance; the insert's round form and mounting detail ensure secure clamping and consistent orientation. The lack of a dedicated chipbreaker indicates a neutral cutting geometry, allowing flexibility across a range of cutter families when the body and insert are technically matched. Compact geometry for stable cutting and fast changeovers With a nominal size of 12 mm and a plate thickness of 4.76 mm, the geometry provides a compact contact area that supports rigidity in shoulder and contour operations. The 15° relief angle helps control cutting forces while the cylindrical hole with one-sided countersink (40°–60°) secures the insert axially and radially in the pocket. These features together promote stable cutting conditions and straightforward indexability, reducing downtime during insert changes and simplifying inventory management. Practical applications and machining benefits Assigned to milling tasks, the insert suits face milling, shoulder work, slotting, high-feed and contour milling depending on the parent cutter family. The neutral chip flow (no chipbreaker) means cutting parameters can be adapted to material and operation, with the carbide grade delivering consistent performance on a broad range of steels and alloyed materials. For production-focused shops the result is improved process security, predictable surface finish and an efficient balance between tool life and cutting rates. Contact Metav Werkzeuge for application advice, technical matching and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6853827 Manufacturer SKU: TUN6853827 SKU: 6853827-Tungaloy Article name: RDMW1204ZD T3130 Tungaloy milling insert Facts Insert size: 12 mm Thickness: 4.76 mm Free angle: 15° ISO designation: 1204ZD Included angle: 0° Materials & special features Material: carbide Grade/coating: T3130 Shape: round Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: none Intended use: milling System compatibility: for Tungaloy milling systems Typical applications: face, shoulder, slot, high-feed and contour milling FAQ What materials is this insert suitable for? The RDMW1204ZD T3130 insert is engineered as a general-purpose milling grade; the T3130 carbide provides balanced wear resistance and toughness suitable for a broad range of steels and alloyed materials in standard milling applications. How does the absence of a chipbreaker affect machining strategy? Without a dedicated chipbreaker, the insert offers a neutral cutting geometry that requires the cutter body and cutting parameters to control chip formation; this allows flexibility across cutter families and applications when the system is technically matched. Is the insert compatible with existing Tungaloy milling holders? Yes — the insert is intended for use in Tungaloy milling systems; correct seating, geometry and cutter body compatibility are required for secure clamping and optimal performance. What does the countersink specification mean for clamping? The cylindrical hole with a one-sided countersink (40°–60°) secures axial location and supports the clamp screw interface, improving repeatability and insert stability in the pocket. Can this insert be used for high-feed milling? The insert is listed for high-feed milling among other operations; successful high-feed application depends on the assigned cutter family and correct selection of machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMW 1606ZD AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, a sharp cutting edge for process security, and precise dimensions for reliable clamping — ensuring steady production in milling processes; order directly via Metav Werkzeuge or consult our specialists for matching tool bodies and clamping solutions. RDMW 1606ZD AH120 indexable insert for milling by Tungaloy — PVD-coated carbide, round Ø16 RDMW 1606ZD AH120 is a PVD-coated carbide indexable insert designed for productive milling applications where a sharp cutting edge and process security are required PVD-coated carbide AH120 grade Sharp cutting edge and process security Round Ø16 mm with 6.35 mm thickness Cylindrical hole with 40°–60° countersink High productivity through wear-resistant cutting geometry The PVD-coated carbide composition of this indexable insert offers notable wear resistance, which translates into longer tool life and fewer interruptions for change‑over. The AH120 grade is formulated for stable chip formation and resistance to edge breakage, so the cutting edge remains sharp across many cuts. For operations demanding consistent surface quality and reduced rework, such material and coating choices contribute directly to improved productivity and lower per‑part machining costs. Secure seating and repeatable process results The insert’s round form and central cylindrical hole with a one‑sided countersink (40°–60°) ensure a defined clamping interface in compatible cutter bodies. Correct matching of the insert seat, geometry and milling body is essential for repeatability; the insert is intended for use only in systems that accept this geometry. The design promotes reliable seating under cutting forces and helps maintain the sharp cutting edge position, reducing vibration and improving dimensional stability on workpieces. Suited to a wide range of milling operations and materials This cutting grade is suitable for face, shoulder, slot, high‑feed and contour milling, depending on the associated tool family. The AH120 grade is optimised for situations where a sharp edge and process security are required rather than aggressive chipbreaking. As a result, the insert is particularly beneficial for general milling tasks that prioritise surface finish and tool life. When paired with the correct milling body, the insert supports consistent results across a broad material spectrum commonly encountered in machining. Practical handling, installation and economic benefits With a thickness of 6.35 mm and a nominal size of Ø16 mm, the insert offers straightforward handling and installation when the cutter body and clamping hardware are matched. The absence of an integrated chipbreaker simplifies geometry and is advantageous where specific cutting strategies control chip flow externally. Fewer tool changes, combined with the material properties of the AH120 grade, contribute to reduced downtime and predictable maintenance intervals, supporting overall shop‑floor efficiency and cost effectiveness. For secure high‑productivity milling with Tungaloy's AH120 grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert supply and tailored recommendations Technical data Article number: 6815283 SKU: 6815283-Tungaloy Manufacturer SKU: TUN6815283 Model series: Fräswendeschneidplatten Material: Hartmetall Numbers / Core technical data Plate size: 16 mm Plate thickness: 6.35 mm Relief angle: 15° Countersink angle: 40°–60° ISO designation: 1606ZD Hole style: cylindrical hole with single-sided countersink Designs / Special features PVD-coated carbide grade AH120 Round plate form No chipbreaker Intended for Tungaloy milling systems, matching insert seat and cutter body required Typical applications: face, shoulder, slot, high‑feed and contour milling depending on tool family FAQ Which milling operations are recommended for this insert? The RDMW1606ZD AH120 insert is suitable for face, shoulder, slot, high‑feed and contour milling depending on the associated tool family and machine setup. What is the coating and substrate of the insert? The RDMW1606ZD AH120 features a PVD‑coated carbide substrate; the AH120 grade is formulated for wear resistance and process reliability during milling. How should the insert be mounted to ensure safe use? Secure seating is achieved when the insert seat, geometry and cutter body are technically compatible; the cylindrical hole with countersink ensures defined clamping when used with the correct clamping screw and body. Is the insert supplied with a chipbreaker? This indexable insert is supplied without a chipbreaker; chip control is expected to be managed by the specific cutter body geometry or cutting parameters. What identifiers should be quoted when ordering or enquiring? Please reference RDMW1606ZD AH120, article number 6815283 and manufacturer SKU TUN6815283 when ordering or requesting compatibility information. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMW 1606ZD AH140 Wendeplatten - Tungaloy
Take advantage of the combination of wear- and chipping-resistant PVD coating, precise geometry and secure clamping for dependable milling cycles; order directly via Metav Werkzeuge or consult our team for application matching. RDMW 1606ZD AH140 milling insert – PVD-coated carbide, round 16 mm, for Tungaloy systems RDMW1606ZD AH140 is a PVD-coated carbide indexable insert designed for milling operations where a sharp cutting edge and high process security are required. PVD-coated AH140 grade Round 16 mm insert for milling 15° relief angle for positive cutting Cylindrical hole with one-sided countersink Consistent performance through advanced coating and substrate The combination of the AH140 PVD coating and a carbide substrate provides a stable cutting edge that reduces flank wear and resists chipping under interrupted cuts. The result is longer tool life and fewer insert changes, which increases effective machine uptime and lowers unit costs per workpiece. The applied coating improves heat resistance and adhesion, so edge integrity is retained even during demanding milling tasks. Secure clamping and system compatibility for reliable operation The insert is part of a system where plate seat, geometry and cutter body must match precisely; this ensures correct positioning and repeatable clamping force. The cylindrical hole with a one-sided countersink (40°–60°) facilitates positive screw engagement and stable seating, reducing micro-movement that can cause premature edge failure. With a 6.35 mm thickness and round 16 mm form, the component is compatible with specified Tungaloy milling bodies, delivering consistent axial and radial support during face, shoulder and contour milling. Broad application range and machining advantages explained Suitable for face, shoulder, slot, high-feed and contour milling depending on the assigned tool family, this insert supports a variety of strategies. The 15° relief angle gives a positive cutting geometry for reduced cutting forces and improved surface finish on many materials, while the PVD-coated surface reduces adhesion of built-up material. For users less familiar with coatings: PVD (physical vapour deposition) forms a thin, hard layer that enhances wear resistance without significantly changing the substrate toughness, so the insert keeps a sharp edge and predictable wear behaviour across batch production. For tailored selection guidance or to source matching cutter bodies, contact Metav Werkzeuge – our consultants will recommend the correct Tungaloy insert and tool family for the intended milling application. Technical Data Article number: 6820676 Manufacturer SKU: TUN6820676 Supplier SKU: 6820676-Tungaloy Facts Insert designation: RDMW1606ZD Grade/coating: AH140 (PVD-coated carbide) Insert form: round, Ø 16 mm Thickness: 6.35 mm Relief angle: 15° Countersink angle: 40°–60° Mounting: with hole (cylindrical hole + one-sided countersink) Special features Application: milling Model series: milling indexable inserts Cutting material type: carbide Chipbreaker: without chipbreaker Typical uses: face, shoulder, slot, high-feed, contour milling System requirement: matching insert seat, geometry and body FAQ What materials is this insert suited for? The RDMW1606ZD AH140 insert is designed for general milling tasks where a PVD-coated carbide performs well; material suitability depends on the specific cutter body and machining parameters chosen. How does the AH140 grade improve process security? AH140’s PVD layer enhances edge stability and wear resistance, so the insert offers reliable cutting behaviour and reduced risk of edge chipping in interrupted or mixed-cut operations. Is a matching milling body required for correct use? Yes, correct function requires a milling body with compatible seat and geometry; the insert’s mounting features — cylindrical hole with countersink — ensure secure clamping when paired with the appropriate Tungaloy cutter. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDMW 1606ZD T3130 Wendeplatten - Tungaloy
Take advantage of the combination of T3130 wear resistance and a carbide substrate for steady, repeatable milling performance; secure stock or technical advice via Metav Werkzeuge for uninterrupted production. RDMW1606ZD T3130 milling indexable insert — Tungaloy The RDMW1606ZD T3130 is a round carbide indexable insert for Tungaloy milling systems, designed for face, shoulder, slot and contour milling where seat, geometry and cutter body must match. Tungaloy grade T3130 for wear resistance Carbide construction for robust cutting edges Round 16 mm insert with 6.35 mm thickness Cylindrical hole with single-side countersink Consistent cutting performance through material design The combination of the T3130 grade and a carbide substrate provides a deliberate balance between wear resistance and toughness, ensuring stable edge life under a variety of cutting conditions. As an indexable cutting element for milling systems, the insert supplements the chosen geometry with the required resistance to flank wear and chipping; this contributes to predictable tool life and fewer unscheduled tool changes. Process reliability is thereby increased, helping to maintain cycle times and component quality during extended production runs. Secure clamping and geometry for repeatable results A round insert with a 16 mm nominal size and 6.35 mm thickness offers inherent stability in the pocket, while the 15° relief angle supports effective cutting engagement across diverse feed rates. The cylindrical hole with a single-side countersink (40°–60°) enables positive locate and uniform clamping force, which reduces micro-movement and improves reproducibility of the cutting edge position. These design choices deliver mechanical security that benefits high-feed operations and contour passes by reducing vibration and preserving surface finish. Versatile application range and economic machining Intended for general milling tasks — including face, shoulder, slot, high-feed and contour milling — the insert is optimised for use in Tungaloy milling tool families where seat and geometry match is essential. The lack of a chipbreaker on this grade focuses application on jobs that favour continuous chip evacuation or where geometry-specific breakers are provided by the cutter body. The result is a cost-effective solution: fewer insert changes, stable surface integrity and consistent dimensional results, which together lower the cost per component and support stable process outputs. For milling operations seeking high process reliability with Tungaloy's T3130 grade, contact Metav Werkzeuge for availability and tailored application advice — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Manufacturer article number: 6853828 SKU: 6853828-Tungaloy Manufacturer SKU: TUN6853828 Model series: Milling indexable inserts Designation: RDMW1606ZD Material: Carbide Facts Diameter: 16 mm Thickness: 6.35 mm Relief angle: 15° Countersink angle: 40°–60° Hole: cylindrical, with single-side countersink Shape: round Special features Grade: T3130 No chipbreaker For milling applications Compatible with Tungaloy milling systems — matching seat and geometry required Balance of wear resistance and edge stability FAQ What milling operations are suitable for this insert? The RDMW1606ZD T3130 indexable insert (SKU 6853828-Tungaloy) is suitable for face, shoulder, slot, high-feed and contour milling depending on the cutter family and geometry chosen. Is the insert compatible with non‑Tungaloy cutter bodies? Compatibility depends on the pocket and fastening concept; the RDMW1606ZD requires matching seat, geometry and clamping design, so only mechanically compatible cutter bodies should be used. Does this grade include a chipbreaker? This variant is specified without a chipbreaker; chip control is provided by the cutter body or by selecting an alternative insert geometry where required. Which material classes is the insert intended to machine? The T3130 grade is designed for a broad range of milling tasks where a balance of wear resistance and edge stability is needed; selection should consider workpiece material and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RFEN 2004M0 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of wear resistance, edge stability and system compatibility for reliable milling performance; order the RFEN2004M0 GH330 insert directly via Metav Werkzeuge or consult our specialists for configuration advice. RFEN 2004M0 GH330 indexable insert for milling – Tungaloy RFEN 2004M0 GH330 is an indexable milling insert designed for Tungaloy milling systems, intended for face, shoulder, slot, high-feed and contour milling within matching cutter families. GH330 carbide grade for high wear resistance Round 20 mm insert, 4.76 mm thickness 25° relief angle for controlled cutting Compatibility with Tungaloy milling systems Optimised wear resistance and cutting stability The RFEN2004M0 GH330 indexable insert is manufactured from cemented carbide and specified in the GH330 grade to deliver a balanced combination of wear resistance and toughness. This balance reduces flank wear and preserves the cutting edge under interrupted cuts and variable feed conditions, supporting longer productive runs. The result is predictable tool life and consistent surface finish, which together improve process reliability and reduce downtime in series production. Engineered for system compatibility and secure clamping This insert is intended to be used within the complete milling system comprising the cutter body, insert, clamping screw and, where required, a shim or underlay. The round 20 mm form and the 4.76 mm thickness require a matching seat and geometry on the toolholder; correct seating ensures repeatable positioning and stable cutting forces. The specification explicitly states that insert seat, geometry and cutter body must be technically compatible, so selection should follow the cutter family and holder design to achieve optimal results. Versatile for common milling operations Designed for a broad scope of milling tasks, the component suits planar, shoulder, slot, high-feed and contour milling depending on the assigned tool family. The 25° relief angle and the absence of a chipbreaker make the insert robust in heavier engagement cuts while the round shape assists in distributing cutting loads and extending edge life. Where process flexibility is required, this grade provides consistent performance across a variety of steel and cast material classes typically encountered in jobbing and production workshops. Practical notes on selection and handling The plate is supplied without hole and has a corner radius of 0, making it preferable where a defined cutting profile is required. As a cemented carbide insert in the GH330 grade, it complements geometrical choices by offering stable chip formation and resistance to abrasion; this makes it suitable where a balance between economy and repeatable quality is desired. Mounting must follow the cutter manufacturer's torque and clamping guidelines to preserve seating integrity and to avoid premature edge damage. Contact Metav Werkzeuge to specify the RFEN 2004M0 GH330 insert for optimal integration into Tungaloy milling systems and to receive tailored advice from our technical consultants. Technical data Article number: 6805885 Manufacturer SKU: TUN6805885 Brand: Tungaloy Label: RFEN2004M0 GH330 Tungaloy-Wendeplatte Core data Insert size: 20 mm Thickness: 4.76 mm Relief angle: 25° Corner radius: 0 Shape: round Hole: none Chipbreaker: none ISO designation: 2004M0 Materials & features Material: cemented carbide Grade: GH330 Application: milling (face, shoulder, slot, high-feed, contour) System components: cutter body, insert, clamping screw, shim (if required) Platen seat and geometry must match cutter body FAQ What materials is this insert suited for? The RFEN2004M0 GH330 insert is a cemented carbide grade designed to offer broad applicability across common steels and cast irons when used within the appropriate Tungaloy milling system. How must the insert be mounted in the cutter? Mounting requires the insert seat and geometry to match the cutter body; the RFEN2004M0 requires secure clamping with the correct screw and, if applicable, the specified shim to ensure repeatable positioning. Can the RFEN2004M0 GH330 be used for high-feed milling? Yes, the GH330 grade and the round insert form allow the component to be used in high-feed and heavy-engagement operations depending on the assigned tool family. Is a chipbreaker included on this insert? This specific insert is supplied without a chipbreaker; machining strategy should account for chip formation accordingly. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6805885 and the manufacturer SKU is TUN6805885 for the RFEN2004M0 GH330 Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RFEN 2004M0 KS20 Wendeplatten - Tungaloy
Take advantage of the KS20 grade and carbide construction to combine edge stability, wear resistance and dependable performance in milling operations; order directly via Metav Werkzeuge or request technical advice from the consultants at Metav Werkzeuge. RFEN2004M0 KS20 RFEN indexable insert for milling by Tungaloy The RFEN2004M0 KS20 is a round indexable insert designed for milling applications in Tungaloy milling systems, offering a balanced combination of wear resistance and toughness for demanding cutter assemblies. KS20 grade: wear-resistant and tough Round 20 mm insert, 4.76 mm thickness Designed for Tungaloy milling systems Precision and longevity for continuous machining The insert is manufactured from carbide and specified in the KS20 grade, which pairs wear resistance with sufficient toughness to preserve the cutting edge under typical milling loads. This combination reduces flank wear and helps maintain a consistent surface finish over longer tool life, contributing to predictable process times and lower indexable-insert consumption. The round geometry supports smooth cutting transitions, while the 4.76 mm plate thickness provides mechanical stability during interrupted cuts. These characteristics are particularly beneficial where stable chip control and repeatable results are essential for productivity. System compatibility and mounting clarity The component is intended for use only in matching Tungaloy milling bodies; insert seat, geometry and cutter body must match technically. The designation 2004M0 and the RFEN form identify the insert family and ensure interchangeability within the correct tool system. The insert is supplied without a hole and without a chipbreaker, so the cutter body and clamping method must be compatible with a plain round insert. The 25° free angle and 0 mm corner radius define the cutting clearance and profile interaction, which should be considered when selecting the tool body and machining parameters to achieve the desired cutting performance. Typical applications and machining advantages Engineered for general milling tasks, the insert supports face milling, shoulder milling, slotting, high-feed milling and contouring depending on the assigned tool family. The round insert form is particularly effective where frequent index changes and multi-directional engagement occur; it can extend time between tool changes and reduce set-up complexity. The KS20 compound enhances edge stability, making the insert suitable for operations that require both robust chip formation and acceptable surface integrity. Where process stability and consistent results are priorities, this grade helps maintain throughput while preserving component quality. Practical considerations for implementation When integrating the insert into an existing machining process, assess cutting data in relation to the carbide grade and the absence of an integral chipbreaker. Trial runs at conservative cutting speeds and feeds are advisable to determine optimal parameters; the carbide substrate and KS20 grade will then allow gradual adjustment towards productivity targets. Ensure the clamping screw and any available support shim match the cutter body specification to avoid seat mismatches that could affect run-out or clamping force. Proper matching of insert and cutter body reduces the risk of premature wear and supports repeatable, safe machining cycles. Contact Metav Werkzeuge today to confirm compatibility with existing tool bodies, request detailed technical data or arrange a consultation with an applications specialist via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 6805886 SKU: 6805886-Tungaloy Manufacturer SKU: TUN6805886 Model series: Fräswendeschneidplatten Material: carbide Facts Thickness: 4.76 mm Insert size: 20 mm Free angle: 25° Corner radius: 0 mm ISO designation: 2004M0 Special features KS20 grade Round insert Without hole No chipbreaker Intended application: milling System requirement: matching seat and cutter body Typical applications: face, shoulder, slot, high-feed and contour milling FAQ What is the primary application for this insert? The RFEN2004M0 KS20 indexable insert by Tungaloy is intended for milling and is suitable for face, shoulder, slot, high-feed and contour milling depending on the tool family. Which material is the insert made from? This insert is made from carbide in the KS20 grade, combining wear resistance with edge stability for sustained milling performance. Does the insert have a chipbreaker or mounting hole? The RFEN2004M0 insert is supplied without a chipbreaker and without a hole, requiring a compatible cutter body and clamping arrangement. What geometric details affect cutter selection? Key geometry data are 20 mm insert size, 4.76 mm thickness and a 25° free angle; these parameters determine seat fit, clearance and engagement characteristics. How should compatibility with existing tooling be verified? Verify that the insert seat, insert geometry and cutter body are technically compatible; the ISO code 2004M0 and the RFEN form should match the intended Tungaloy milling system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RFEN 2004M0 UX30 Wendeplatten - Tungaloy
Benefit from a combination of a sharp cutting edge, low cutting forces and precise geometry to maintain stable chip formation and consistent milling quality; order the RFEN2004M0 UX30 indexable insert directly via Metav Werkzeuge or consult our technical team for matching tool bodies and clamping advice. RFEN 2004M0 UX30 indexable insert for milling by Tungaloy — round 20 mm, 25° clearance angle RFEN 2004M0 UX30 is a round indexable insert designed for milling applications where low cutting forces and reliable chip formation are priorities Uncoated carbide grade UX30 Sharp cutting edge for low cutting forces Round 20 mm insert, 4.76 mm thickness 25° clearance angle, no chipbreaker Greater productivity through a sharp-edged carbide grade The UX30 grade is an uncoated carbide developed for operations that require a sharp cutting edge and controlled chip flow. In practical terms, the geometry of this insert reduces the energy required per cut, which directly translates into lower spindle loads and improved tool life under many cutting conditions. The combination of a fine edge and carbide substrate supports consistent surface finish during planing, shoulder, slot and contour milling when used within the appropriate tool family. For users seeking economical, repeatable performance, this insert offers a straightforward way to reduce cycle time while preserving edge stability. Secure system compatibility and straightforward replacement Designed for Tungaloy milling systems, the insert requires that the insert seat, geometry and cutter body match correctly to ensure clamping reliability. The RFEN2004M0 format is an indexable insert, meaning it can be rotated or replaced without regrinding, which reduces downtime and lowers overall tooling cost per part. Correct mechanical fit and the use of the specified clamping screw and backing washer (where applicable) ensure stable seating and repeatable positioning after indexation. This approach supports a production-oriented workflow by simplifying maintenance and ensuring that each indexing operation restores the original cutting geometry. Clear specifications for predictable machining results Key dimensions and the lack of a chipbreaker define the insert’s best uses: the round 20 mm profile with 4.76 mm thickness and a 25° clearance angle produces a low contact area and reduces cutting forces in thin depths of cut. The absence of a chipbreaker indicates behaviour suited to controlled chip evacuation strategies or specific workpiece materials where free-flowing chips are acceptable. The zero corner radius supports sharp-edge engagement and is beneficial where minimal radial cutting force is desired. When integrating this insert, verify compatibility with the chosen cutter body and select cutting parameters that reflect the sharp-edge geometry to achieve the intended balance of surface finish and productivity. Contact Metav Werkzeuge to order the RFEN2004M0 UX30 indexable insert from Tungaloy or to receive application-specific advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 6805888-Tungaloy Manufacturer SKU: TUN6805888 Manufacturer article number: 6805888 Model designation: RFEN2004M0 Dimensions & angles Diameter: 20 mm Thickness: 4.76 mm Clearance angle: 25° Corner radius: 0 mm Hole: without hole Materials & features Material: Carbide (Hartmetall) Grade: UX30 (uncoated) Shape: Round Chipbreaker: none Application: Milling Compatible with: Tungaloy milling systems FAQ What workpiece materials is this insert suitable for? The RFEN2004M0 UX30 indexable insert is specified as an uncoated carbide grade aimed at applications where low cutting forces and good chip formation are required; suitability depends on the chosen cutting data and the workpiece material. Does the insert require a chipbreaker for safe operation? This RFEN2004M0 UX30 insert is supplied without a chipbreaker, so chip control must be managed by cutting parameters, coolant strategy or the cutter body design. How does the round shape affect milling performance? The round shape and zero corner radius of the RFEN2004M0 UX30 allow for smooth contouring and consistent engagement, reducing peak radial loads during interrupted cuts. Is the insert reversible or indexable? The RFEN2004M0 UX30 is an indexable insert; it can be rotated or replaced to restore the cutting edge without regrinding, provided the insert seat and clamping system match the Tungaloy milling body. What are the critical checks before mounting the insert? Ensure mechanical compatibility between the insert, cutter body and clamping screw; check that the seat geometry matches RFEN2004M0 and that the cutter is specified for a 20 mm round insert with 4.76 mm thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com