RCMT 1606EN AH120 Wendeplatten - Tungaloy
Optimise milling performance with the PVD-coated AH120 grade and the robust RCMT1606EN geometry: the insert delivers a sharp cutting edge and strong process security, combined with a cylindrical hole and one‑sided countersink for reliable clamping. Order the RCMT1606EN AH120 insert directly via Metav Werkzeuge or ask our consultants if needed. RCMT 1606EN AH120 indexable insert for milling – Tungaloy The RCMT1606EN AH120 is an indexable milling insert designed for face, shoulder, slot, high‑feed and contour milling within compatible Tungaloy milling systems. PVD-coated AH120 for wear resistance Suitable for face, shoulder and slot milling Cylindrical hole with single-sided countersink 7° clearance with 6.35 mm thickness Consistent cutting performance through PVD-coated carbide technology The RCMT1606EN combines a PVD-coated surface with AH120 carbide to deliver extended tool life where both a sharp cutting edge and process security are required. The coating reduces flank wear and supports stable temperatures at the cutting zone, which helps maintain dimensional accuracy during medium to high duty cycles. When mounted in a matching milling body, the insert keeps cutting forces predictable and reduces the need for frequent index changes, supporting uninterrupted production and improved overall efficiency. Secure clamping and controlled chip formation for reliable machining A cylindrical hole with a single-sided countersink (40°–60°) ensures dependable seating and torque transfer to the clamping screw, while the single-sided chipbreaker promotes consistent chip control for many finishing and roughing passes. The insert’s 6.35 mm thickness and 7° clearance angle balance stiffness and relief geometry to prevent rubbing and minimise chatter. These design choices result in improved surface finish and reduced likelihood of edge chipping, translating to fewer interruptions and a more economical tool cycle. Broad application range with clear process benefits Designed for use in the Tungaloy milling system, the insert supports a range of operations — from face and shoulder milling to slots, contours and high‑feed strategies, depending on the assigned tool family. The round shape and 16 mm size offer flexibility in cutter design, while the grade’s wear‑ and break‑resistant character reduces scrap risk in process‑critical applications. Correct matching of insert seat, geometry and cutter body is essential to achieve the stated benefits and to ensure repeatable, high‑quality results on the shop floor. For procurement of genuine Tungaloy RCMT 1606EN AH120 indexable inserts and tailored technical advice, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm compatibility and delivery options. Technical data Manufacturer article number: 5811855 SKU: 5811855-Tungaloy Manufacturer SKU: TUN5811855 Model series: Indexable milling inserts Material: Carbide Core data Insert size: 16 mm Thickness: 6.35 mm Clearance angle: 7° Angle: 0° Design & special features Shape: round Hole: with central hole Hole style: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Grade: AH120 (PVD-coated carbide) Application: Milling ISO designation: RCMT1606EN FAQ What milling operations are suitable for this insert? Typical uses include face milling, shoulder milling, slot milling, high‑feed and contour milling when the insert is paired with the appropriate Tungaloy milling body and cutter family. What are the advantages of the AH120 grade? The AH120 PVD‑coated carbide grade offers wear and break resistance, making it suitable where a sharp cutting edge and process security are required for stable and repeatable machining. How is the insert secured in the cutter body? Clamping relies on the cylindrical hole and the one‑sided countersink; the RCMT1606EN seats under a clamping screw and must be used in a cutter whose insert seat and geometry match the ISO designation. Can this insert be used for high‑feed milling strategies? Yes — high‑feed milling is listed among the typical applications, subject to the selected tool family and correct machine and process parameters. What identifies the original part on delivery? Genuine items are supplied as Tungaloy indexable inserts with the ISO designation RCMT1606EN and manufacturer references such as article number 5811855 and SKU 5811855‑Tungaloy Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 1606EN AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH120 grade for durable, sharp cutting performance and a secure, cylindrical hole with one-sided countersink for reliable clamping; this yields consistent process stability and longer tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for tool-family matching. RCMT 1606EN AH120 Tungaloy indexable insert for milling – PVD-coated carbide, cylindrical hole RCMT1606EN AH120 is a round indexable insert engineered for face, shoulder, slot, high-feed and contour milling in matching Tungaloy tool bodies. PVD-coated AH120 for wear resistance Cylindrical hole with one-sided countersink 7° relief for stable cutting action Single-sided chipbreaker for controlled chips High-performance coating and cutting-edge durability The insert uses a PVD-coated carbide grade AH120, developed for wear- and fracture-resistant performance in milling. This coating preserves a sharp cutting edge under variable loads, which translates into longer in-process life and reduced tool changes. For production environments that demand consistent cycle times and surface quality, the combination of coating and substrate supports predictable tool behaviour and fewer interruptions. Positive seating, controlled clamping and vibration reduction Secure location and clamping are achieved by the cylindrical hole with a one-sided countersink (40°–60°); this geometry ensures precise seating in the tool pocket and minimises micro-movement during high-load passes. The insert’s 7° relief and round 16 mm plate form contribute to even force distribution, while the single-sided chipbreaker directs chips away from the cutting zone, reducing the risk of built-up edge and chatter. The result is improved process stability and repeatable component accuracy. Broad milling applications with assured process security Designed for a wide range of milling tasks, the insert suits planing, shoulder, groove, high-feed and contour operations depending on the associated tool family. Its properties make it the right choice when a sharp edge and process security are required together: complex geometries benefit from consistent cutting action, and high-volume runs profit from longer tool life. The round format and specific seat geometry also facilitate flexible tool design without compromising clamping integrity. Contact Metav Werkzeuge for product availability and technical consultation on the RCMT 1606EN AH120 insert; our advisors will assist with tool-family compatibility, clamping requirements and application recommendations Technical Data Article number: 5811733 Manufacturer SKU: TUN5811733 Vendor SKU: 5811733-Tungaloy Model series: Fräswendeschneidplatten Designation: RCMT1606EN AH120 Tungaloy-Wendeplatte Specifications Plate size: 16 mm Plate thickness: 6.35 mm Relief angle: 7° Hole style: cylindrical hole + one-sided countersink (40°–60°) Shape: round Features Coating: AH120 (PVD) Material: carbide Chipbreaker: one-sided Application: milling ISO designation: 1606EN FAQ What milling operations is this insert suitable for? The RCMT1606EN AH120 Tungaloy indexable insert is suitable for face, shoulder, slot, high-feed and contour milling, depending on the matched tool family. How does the countersunk cylindrical hole affect performance? The cylindrical hole with one-sided countersink on the RCMT1606EN AH120 ensures precise seating and secure clamping, which reduces vibration and improves repeatability in the machining process. Which materials is the AH120 grade best for? AH120 is a PVD-coated carbide grade designed for wear- and fracture-resistant performance in milling; it is chosen when a sharp cutting edge and process security are both required. How does the single-sided chipbreaker benefit chip control? The single-sided chipbreaker on this round insert channels chips away from the cutting zone, reducing built-up edge and helping to maintain surface finish and tool life for continuous milling. What should be checked before installing this insert? Ensure that the insert seat, geometry and the milling body are technically compatible with the RCMT1606EN AH120 and that clamping hardware matches the hole and countersink geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 1606EN AH140 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH140 carbide for extended wear resistance and a sharp cutting edge that ensures process stability in high-demand milling operations; order directly via Metav Werkzeuge or consult our specialists for application advice. RCMT 1606EN AH140 indexable milling insert (round 16 mm, 6.35 mm) – Tungaloy The RCMT 1606EN AH140 is a round indexable insert developed for Tungaloy milling systems, delivering a wear- and breakage-resistant cutting edge for face, shoulder, slot and contour milling. PVD-coated AH140 carbide grade Round insert 16 mm Ø, 6.35 mm thick Cylindrical hole with 40°–60° countersink Single-sided chipbreaker, 7° relief angle Increased tool life and consistent machining results The combination of a PVD-coated AH140 grade and a robust carbide substrate produces reliable performance under continuous milling conditions. The coating reduces flank and crater wear while the substrate maintains a sturdy cutting edge, which leads to fewer index changes and longer service intervals. For production environments where repeatability matters, this technical pairing translates into measurable gains in uptime and component consistency. The insert’s geometry supports a sharp cutting edge that resists chipping during interrupted cuts, improving surface finish with reduced rework. Secure seating and simple integration into milling systems Designed for compatibility with Tungaloy milling bodies, the insert requires a matching seat, geometry and clamping system for correct function. The cylindrical hole with one-sided countersink (40°–60°) ensures precise axial positioning, while the standard clamping screw and optional backing pad provide secure fixation during heavy cutting. Correct installation prevents micro-movements that can cause premature wear or unexpected tool failure. The standard round 16 mm form factor and 6.35 mm thickness make it straightforward to fit into many tool families, simplifying inventory and tool management. Flexible application across common milling tasks Although the specific tool family determines final cutting strategy, this insert is suitable for a wide range of milling operations including face milling, shoulder milling, slotting, high-feed and contouring when paired with the appropriate cutter body. The single-sided chipbreaker is optimised for controlled chip formation, reducing the risk of built-up edge and improving chip evacuation. This control benefits cycle time and tool life, particularly in mixed production runs where material and cutting conditions vary. Production efficiency and process security with Tungaloy technology Choosing a Tungaloy-grade insert means selecting a solution engineered for process stability and repeatable results. The wear-resistant grade reduces unexpected downtime and provides predictable change intervals, aiding planning and costing in production schedules. Combined with Metav Werkzeuge’s availability and consultation services, integration into existing workflows is straightforward and technically supported, making this insert a practical choice for workshops aiming to balance productivity with component quality. For technical consultation or to secure Tungaloy RCMT 1606EN AH140 inserts for reliable, process-stable milling, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and prompt supply. Technical data Article number: 5811856 SKU: 5811856-Tungaloy Manufacturer SKU: TUN5811856 Article name: RCMT1606EN AH140 Tungaloy-Wendeplatte Manufacturer: Tungaloy Core specifications ISO designation: 1606EN Insert designation: RCMT1606EN Diameter: 16 mm Ø Thickness: 6.35 mm Relief angle: 7° Countersink angle: 40°–60° Designs and special features Material: carbide Coating: PVD Grade: AH140 Shape: round Hole style: cylindrical hole with one-sided countersink Chipbreaker: single-sided System components: milling body, indexable insert, clamping screw, optional backing pad Typical applications: face, shoulder, slot, high-feed and contour milling (depending on tool family) FAQ What materials is this insert suited for? The RCMT 1606EN AH140 insert is a PVD-coated carbide grade intended for general milling tasks where a wear- and breakage-resistant cutting edge is required; material-specific suitability depends on the chosen cutter and cutting data. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) provides precise axial location and secure seating when combined with the correct clamping screw and backing pad, ensuring stable fixation during milling. Which milling operations benefit most from this insert? Typical uses include face milling, shoulder milling, slotting, high-feed and contour milling when the insert is matched to the appropriate milling body and cutting parameters. Is the insert compatible with non-Tungaloy tool bodies? The insert is designed for Tungaloy milling systems; compatibility with other suppliers requires identical seat geometry and clamping specifications to ensure safe and reliable performance. What feature of AH140 helps reduce downtime? The PVD-coated AH140 grade offers improved wear resistance and a robust cutting edge, which reduces frequency of index changes and supports predictable tool life, aiding production planning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 1606EN AH140 Wendeplatten - Tungaloy
Take advantage of PVD-coated carbide and a one-sided chipbreaker for predictable chip control and reliable edge life, ensuring smoother milling cycles and fewer interruptions. Order genuine Tungaloy inserts via Metav Werkzeuge or request advice from our technical consultants. RCMT 1606EN AH140 — Tungaloy indexable insert for milling (PVD-coated carbide, cylindrical hole + 40°–60° countersink) RCMT 1606EN AH140 is an indexable insert for Tungaloy milling systems, intended for face, shoulder, slot, high-feed and contour milling where a sharp cutting edge and process security are required. PVD-coated carbide grade AH140 One-sided chipbreaker for stable chip formation Cylindrical hole with 40°–60° countersink 7° clearance angle; 6.35 mm plate thickness Reliable cutting performance through advanced grade and geometry The combination of a PVD-coated carbide base material and the AH140 grade provides a wear- and fracture-resistant cutting edge that supports stable performance in a wide variety of milling operations. The integrated one-sided chipbreaker improves chip control, reducing the risk of edge chipping and unexpected downtime; this is particularly useful for intermittent cuts or variable engagement angles. Compatibility with the cutter body is essential: insert seat, geometry and milling body must match to achieve the intended clamping force and cutting geometry. For users seeking predictable tool life and consistent component quality, this arrangement brings measurable productivity gains. Secure seating and stiffness for higher process stability Mechanical features such as the cylindrical hole with single-sided countersink (40°–60°) and the 7° clearance angle are designed to ensure repeatable seating and secure clamping in the tool body. The 6.35 mm plate thickness and round 16 mm form increase the stiffness of the cutting edge, which helps to reduce chatter and improve surface finish when compared to thinner inserts in comparable applications. The term “clearance angle” (sometimes called relief angle) denotes the small angle behind the cutting edge that prevents rubbing; a correctly specified clearance minimises heat build-up and preserves the sharpness of the edge for longer cycles. Versatile application range with clear selection guidance This insert suits a broad set of milling tasks — from planing and shoulder milling to specialised high-feed and contour work — when paired with the appropriate tool family. The grade was developed for situations where both a sharp edge and process security are required, making it a solid choice when consistent dimensional and surface requirements matter. When selecting an insert for a specific job, consider the workpiece material, cutting parameters and the tool holder geometry; the combination of grade, chipbreaker and seating features determines the attainable productivity and component quality. For application-specific advice or to source authentic Tungaloy RCMT 1606EN AH140 inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide technical guidance and availability details. Technical Data Article number: 5811734 Manufacturer SKU: TUN5811734 Series: Fräswendeschneidplatten Material: Carbide Facts Insert designation: RCMT1606EN Size: 16 mm Plate thickness: 6.35 mm Clearance angle: 7° Hole: with cylindrical hole + single-sided countersink (40°–60°) Special features Coating: PVD Grade: AH140 Plate shape: round Chipbreaker: one-sided Typical application: face, shoulder, slot, high-feed and contour milling FAQ What materials is this insert suitable for? The RCMT1606EN AH140 Tungaloy indexable insert is formulated for general milling tasks where a sharp cutting edge and process security are required; suitability depends on the workpiece material and cutting data — the AH140 grade is wear- and fracture-resistant for a broad material range. How does the one-sided chipbreaker influence machining? The one-sided chipbreaker on this insert improves chip formation and evacuation, leading to more predictable cutting behaviour and reduced risk of edge breakouts when the RCMT1606EN AH140 is used in compatible Tungaloy milling systems. Which toolholders are compatible with this insert? Compatibility requires a matching insert seat and geometry; the RCMT1606EN form, with its cylindrical hole and countersink, must be used in cutter bodies designed for RCMT1606EN-format inserts to ensure correct clamping and performance. Why is the countersink angle specified as 40°–60°? The single-sided countersink in the RCMT1606EN AH140 provides a positive seating surface that helps centre the insert and distribute clamping forces; the 40°–60° range accommodates common cutter designs while maintaining stable seating. Can the insert be used for high-feed milling? Yes; when paired with the appropriate tool family and cutting parameters, the insert’s geometry and AH140 grade support high-feed and contour milling applications where a sharp cutting edge and process reliability are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 1606EN AH725 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade engineered for mixed-material machining and a secure, centre‑hole clamping design to maintain stable cutting performance. Order the insert directly via Metav Werkzeuge or consult our specialists for application matching. RCMT 1606EN AH725 Tungaloy indexable milling insert — PVD‑coated carbide, round insert with hole for milling RCMT 1606EN AH725 Tungaloy is an indexable milling insert designed for face, shoulder, slot, high‑feed and contour milling within compatible Tungaloy milling systems PVD-coated carbide AH725 grade Universal for steel and stainless steels Optimised for process security and stability Round insert with hole, 6.35 mm thickness Consistent cutting when machining mixed materials The PVD‑coated carbide grade AH725 delivers a balance between toughness and wear resistance that is particularly suited to alternating material batches. For workshops that switch between steel and stainless steels, this insert reduces the risk of edge chipping and unexpected breakouts; the engineered chip control and one‑sided breaker help maintain a reliable cutting edge. The result is fewer interruptions, predictable tool life and steadier component quality in series production. Secure seating and vibration reduction for repeatable accuracy The round insert with a centred hole and a cylindrical hole style plus one‑sided countersink (40°–60°) ensures precise seating on the cutter body and reliable clamping with the appropriate screw. With a plate thickness of 6.35 mm and a clearance angle of 7°, the geometry promotes stable engagement and lowers vibration during heavy or interrupted cuts. Stable seating improves surface finish and reduces the need for subsequent rework, supporting consistent cycle times on CNC milling centres. System compatibility and straightforward selection for milling bodies The RCMT designation indicates the insert geometry and seating form; RCMT1606EN denotes the specific ISO size and edge preparation for the RCMT family. Compatibility of insert seat, geometry and cutter body is essential: the insert must be used in a Tungaloy‑compatible milling body with matching seat and clamping arrangement. Selecting the correct grade and insert shape simplifies tool management and helps to achieve the intended machining strategy with minimal trial and error. Durable coating and grade for reliable production runs A PVD surface treatment applied to the AH725 grade provides a hard contact layer that extends edge life under continuous operation while retaining sufficient substrate toughness to withstand variable cutting forces. The combination of coating and substrate yields long tool life and stable performance across small tools and applications with high demands on process security. This reduces tool change frequency and supports a more economical, steady production workflow. For application advice or to request compatible milling bodies and clamping screws for Tungaloy inserts, contact Metav Werkzeuge — our consultants are available to ensure the RCMT 1606EN AH725 insert matches the intended machining process. Technical data Article number: 5811732 Manufacturer SKU: TUN5811732 SKU: 5811732-Tungaloy Model series: Fräswendeschneidplatten Material: carbide Coating / grade: PVD, AH725 Core figures Insert designation: RCMT1606EN Inscribed circle / size: 16 mm Plate thickness: 6.35 mm Clearance angle: 7° Hole style: cylindrical hole + one‑sided countersink (40°–60°) Manufacturer article number: 5811732 Design & special features Round insert with centre hole One‑sided chipbreaker Intended application: milling (face, shoulder, slot, high‑feed, contour) System components: milling body, indexable insert, clamping screw, possible shim Suitable materials: steel and stainless steels (universal grade) PVD‑coated carbide for balanced wear resistance and toughness FAQ What materials is this insert suitable for? The RCMT1606EN AH725 insert is formulated as a universal, fracture‑resistant grade for machining steel and stainless steels, offering reliable performance when switching between these materials. How does the insert mount to the milling body? The insert uses a centred hole with a cylindrical hole plus one‑sided countersink; correct seating and clamping with the matching screw ensure stable fixation in compatible Tungaloy milling bodies. What are the main advantages of the AH725 grade? Grade AH725 combines PVD coating and a carbide substrate to deliver a balance of wear resistance and toughness, improving edge life and process security in varied milling applications. Is the insert suitable for high‑feed milling? Yes — depending on the assigned tool family and cutter body, the geometry and chipbreaker make the insert suitable for high‑feed operations as well as face and contour milling. What must be checked before installation? Ensure the insert designation and seat geometry match the milling body; the RCMT family requires a compatible pocket and clamping arrangement for secure and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 1606EN AH725 Wendeplatten - Tungaloy
Benefit from the AH725 PVD-coated carbide grade for stable chip control and broad material coverage; the round 16 mm form with 7° relief delivers versatility across face, shoulder and high-feed milling. Order the RCMT1606EN AH725 insert directly via Metav Werkzeuge or ask our consultants if needed. RCMT 1606EN AH725 — milling indexable insert by Tungaloy A RCMT1606EN AH725 indexable insert designed for Tungaloy milling systems, intended for face, shoulder, slot, high-feed and contour milling where process security is essential PVD-coated carbide AH725 grade Universal for steel and stainless steels Round 16 mm plate, 6.35 mm thickness Cylindrical hole with 40°–60° countersink Consistent machining performance for secure production The combination of PVD coating and fine-grain carbide substrate provides a dependable cutting edge that extends tool life and reduces unplanned tool changes. As a universal, fracture-resistant grade, AH725 is optimised for mixed production runs involving steel and stainless steels, delivering predictable wear behaviour. This results in improved process security, fewer interruptions and more consistent component quality in series or batch manufacturing. Controlled chips and reduced rework thanks to chipbreaker design A tailored single-sided chipbreaker ensures chips are formed and evacuated reliably across a range of feeds and depths of cut. The controlled chip formation lowers the risk of recutting and surface defects, which translates to reduced secondary operations and higher first-pass yields. The PVD surface treatment also enhances thermal stability at elevated cutting temperatures, aiding in edge retention during continuous milling cycles. Compact geometry for versatile insert integration With a 16 mm diameter and plate thickness of 6.35 mm, this round insert offers multiple effective cutting edges and straightforward indexing. The insert features a cylindrical hole with a one-sided countersink (40°–60°) and a 7° relief, enabling secure clamping and consistent seating in compatible cutter bodies. The RCMT1606EN designation corresponds to established geometry standards; correct matching of insert seat, geometry and milling body is required for safe, repeatable performance. Efficient solution across common milling tasks Designed for modular Tungaloy tool families, the insert is suitable for face, shoulder, slot, high-feed and contour milling depending on the allocated tool body. Its universal character makes it particularly useful when jobs involve alternating materials or when small to medium cutters require dependable edge life. Choosing this insert supports reduced tool inventory complexity and contributes to a smoother production flow with predictable maintenance intervals. For technical matching, availability and to secure the RCMT1606EN AH725 for immediate production use, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 5811854 Manufacturer SKU: TUN5811854 SKU: 5811854-Tungaloy Model series: Milling indexable inserts Designation: RCMT1606EN Numbers / Core technical data Plate diameter: 16 mm Plate thickness: 6.35 mm Relief angle: 7° Countersink angle: 40°–60° Special features Material/coating: PVD-coated carbide (AH725) Shape: round with cylindrical hole and one-sided countersink Chipbreaker: single-sided Application: milling — face, shoulder, slot, high-feed, contour Compatibility: for Tungaloy milling systems; matching seat/geometry required FAQ What materials is this insert best suited to machine? The RCMT1606EN AH725 insert is specified for machining steel and stainless steels; its AH725 grade offers versatile performance across these materials. How does the chipbreaker affect machining stability? The single-sided chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of recutting during milling. Which cutter bodies are compatible with this insert? Compatibility requires matching the insert seat, geometry and milling body; the insert is intended for Tungaloy milling systems with corresponding RCMT seats. What does the 7° relief mean in practice? A 7° relief reduces contact behind the cutting edge, lowering friction and heat generation, which supports consistent tool life and surface quality. Is the insert suitable for high-feed milling? Yes — the combination of PVD coating and the grade’s fracture resistance makes the insert appropriate for high-feed and contour operations when used in the correct tool family. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 1606FN KS15F Wendeplatten - Tungaloy
The combination of the KS15F cutting grade and the round 16 mm form with 6.35 mm thickness ensures a balanced mix of wear resistance and edge stability for consistent milling results; order available stock through Metav Werkzeuge or request application advice from the consultants. RCMT1606FN-NAJ KS15F Tungaloy indexable milling insert – round 16 mm, NAJ chipbreaker for milling RCMT1606FN-NAJ KS15F Tungaloy indexable milling insert designed for milling operations where the insert seat, geometry and cutter body are matched for optimal performance KS15F grade for balanced wear resistance Round 16 mm form with 6.35 mm thickness Cylindrical hole with 40°–60° countersink Suitable for face, shoulder and slot milling Reliable cutting behaviour for diverse milling tasks The KS15F insert grade, integrated into a cemented carbide substrate, offers a deliberate compromise between hardness and toughness that supports repeatable machining across a variety of workpiece materials. The round geometry provides multiple cutting edges, which increases tool life in interrupted and continuous cuts while the NAJ chipbreaker controls chip formation for stable evacuation. This results in more consistent surface finishes and reduced downtime due to fewer insert changes. System compatibility and practical assembly benefits Designed specifically for Tungaloy milling systems, the insert requires a matching insert seat and cutter body; the system-based design ensures secure clamping and correct seating. The central cylindrical hole with a single-sided countersink (40°–60°) permits reliable locating and clamping, while the 7° relief helps to reduce rubbing on the flank during engagement. These features combine to decrease vibration and promote predictable cutting forces, which supports higher productivity in shop-floor environments. Clear application advantages and process optimisation The geometry and grade are suitable for face, shoulder, slot, high-feed and contour milling depending on the assigned cutter family. The round form and sturdy substrate permit occasional heavy engagement and interrupted cuts, providing economic performance in mixed-series production. The insert's dimensions (16 mm diameter, 6.35 mm thickness) simplify inventory management by aligning with common cutter bodies and permit quick replacement to restore cutting capability. Interpreting technical terms and achieving consistent results For customers less familiar with carbide grades and chipbreaker nomenclature: KS15F denotes a Tungaloy-specific grade engineered to combine wear resistance with edge stability; NAJ refers to a chipbreaker geometry tailored to produce short, controllable chips in a range of feeds and depths. The cemented carbide construction is chosen for its hardness and heat resistance, making it suitable for extended milling cycles. Matching insert and cutter specifications is essential for the intended performance. Contact Metav Werkzeuge for availability and application advice on Tungaloy KS15F inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 5811917 SKU: 5811917-Tungaloy Manufacturer SKU: TUN5811917 Manufacturer article number: 5811917 Facts Insert designation: RCMT1606FN-NAJ ISO code: 1606FN Form diameter: 16 mm Thickness: 6.35 mm Relief/free angle: 7° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Grade: KS15F Chipbreaker: NAJ Material: cemented carbide Series: milling indexable inserts Typical applications: face, shoulder, slot, high-feed and contour milling Shape: round FAQ What materials can this insert machine effectively? The RCMT1606FN-NAJ KS15F insert is intended for a broad range of milling tasks; the KS15F grade and cemented carbide body provide balanced wear resistance and toughness suitable for many common engineering materials. How does the NAJ chipbreaker affect machining? The NAJ chipbreaker produces short, controlled chips and improves evacuation during milling, which helps maintain consistent cutting forces and surface quality when using the RCMT1606FN-NAJ KS15F insert. Is the insert compatible with non-Tungaloy cutter bodies? The insert must be used in cutter bodies and seats that are technically compatible; correct seating and clamping are required to achieve the designed performance of the RCMT1606FN-NAJ KS15F Tungaloy indexable milling insert. How many cutting edges are available on this round insert? The round form of the insert provides multiple effective cutting edges; actual usable edges depend on the specific cutter design and wear patterns observed during operation. What are the locating and clamping features of the insert? The insert includes a cylindrical hole with a single-sided countersink (40°–60°) for reliable locating and clamping in compatible Tungaloy milling systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 1606M0 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated cemented carbide grade AH120, a precisely matched RS chipbreaker, and ISO compatibility for consistent turning results; order the inserts directly via Metav Werkzeuge or ask our consultants for holder recommendations. RCMT 1606M0 AH120 RCMT1606M0‑RS – Tungaloy indexable insert, PVD‑coated carbide, RS chipbreaker The RCMT1606M0‑RS AH120 Tungaloy indexable insert is an ISO‑standard round insert designed for external and internal turning where a sharp cutting edge and process security are required PVD‑coated cemented carbide AH120 Optimised RS chipbreaker for controlled chips ISO round insert, Ø 16 mm, 6.35 mm thick Cylindrical hole with single‑side countersink 40°–60° Durable edge and extended tool life for reliable production The combination of a PVD‑coated cemented carbide substrate and the AH120 grade provides a wear‑resistant, fracture‑resistant cutting edge that maintains dimensional stability in repetitive turning tasks. This construction reduces flank wear and helps to sustain surface quality over longer tool life, which in turn lowers tool change frequency and improves overall productivity. The coating acts as a barrier against adhesion and abrasion while the robust substrate resists mechanical shock, delivering a dependable balance between edge sharpness and longevity. Seamless ISO compatibility for straightforward tool selection Compatibility with the clamping system is determined by shape, clearance angle, tolerance class, fastening method, size and thickness; the round ISO designation 1606M0 ensures the insert fits standard holders when the corresponding geometry is selected. The insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure fastening, and its 6.35 mm thickness offers stable clamping for interrupted cuts. This design simplifies holder matching and reduces trial‑and‑error during setup, enabling faster machine readiness and consistent process results. Improved chip control and process security for turning operations The RS chipbreaker is tuned to break and evacuate chips effectively in many turning conditions, reducing the risk of long, entangling chips and minimising secondary finishing work. The insert is intended for both external and internal turning where a sharp edge and process reliability are priorities; selecting the correct chipbreaker and grade according to workpiece material and machining stability is essential for optimal performance. The result is smoother feeds, fewer interruptions and a more predictable production flow. Practical system approach for workshop efficiency The insert is intended to be used within a compact system comprising the ISO round insert, a matching external holder or boring bar, and the appropriate shim/clamp set with replacement screws. This systematic view simplifies inventory planning: replacement inserts, matching holders and fasteners form a coherent toolkit that supports rapid changeovers and consistent set‑ups across multiple machines. Clear identification via the ISO designation and the manufacturer SKU supports traceability and procurement. For tailored advice on selecting the correct holder and grade for demanding turning tasks, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will recommend the optimal Tungaloy inserts and compatible system components. Technical Data Article number: 6852172 SKU: 6852172‑Tungaloy Manufacturer article number: 6852172 Manufacturer SKU: TUN6852172 Model series: ISO‑Drehwendeschneidplatten Material: Cemented carbide Numbers / Core technical data ISO designation: 1606M0 Insert diameter: 16 mm Thickness: 6.35 mm Relief angle: 7° Corner radius: 0 mm Countersink angle: 40°–60° Designs / Special features Grade: AH120 Coating: PVD Chipbreaker: RS Insert shape: round Hole: with cylindrical hole and single‑side countersink Intended use: external and internal turning System components: matching outer holder or boring bar, shim/clamp set, replacement screws FAQ What turning operations is this insert suitable for? The RCMT1606M0‑RS AH120 insert from Tungaloy is designed for both external and internal turning where a sharp cutting edge and high process security are required. What characterises the AH120 grade and its coating? AH120 is a PVD‑coated cemented carbide grade offering wear and fracture resistance for turning; the coating enhances adhesion resistance and extends tool life under continuous operation. How does the RS chipbreaker improve machining? The RS chipbreaker promotes effective chip control and evacuation during turning, reducing entangling chips and enabling steadier feeds and improved surface finishes. How can compatibility with holders be ensured? Compatibility relies on matching the insert shape, clearance angle, tolerance class, fastening method, size (Ø 16 mm) and thickness (6.35 mm); the ISO 1606M0 designation simplifies selection of appropriate holders. What components constitute a complete system for this insert? A complete system includes the ISO round insert, a compatible external holder or boring bar, the required shim/clamp set and spare screws for secure fastening. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
RCMT 1606M0 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8005, an RS chipbreaker and ISO compatibility for consistent, productive turning of heat-resistant alloys and hard materials. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. RCMT 1606M0 AH8005 Turning insert (ISO) – PVD-coated carbide, RS chipbreaker (Tungaloy) The RCMT1606M0-RS AH8005 is an ISO-form indexable insert designed for precision external and internal turning of heat-resistant alloys and hard materials, offering stable cutting performance in productive machining environments PVD-coated carbide AH8005 Optimised RS chipbreaker ISO RCMT form for standard holders Cylindrical hole with single-side countersink Stable cutting performance for demanding materials The combination of a PVD-coated surface and a wear-resistant carbide substrate delivers reliable edge life when machining heat-resistant alloys and other hard materials. The selected grade, AH8005, is engineered for stable machining, keeping flank wear and edge degradation to a minimum under consistent cutting conditions. This stability directly improves process predictability and reduces unplanned tool changes, supporting continuous production and a better cost-per-part ratio. Predictable mounting and straightforward integration into ISO tool systems Designed to the ISO designation RCMT1606M0-RS, the insert matches common clamping geometries and tolerance classes so that compatibility with holders is determined by form, relief angle, tolerance, fastening and size. The 7° relief angle, 6.35 mm thickness and 16 mm diameter ensure a secure fit in compatible external holders or boring bars. The insert’s cylindrical hole with a one-sided countersink (40°–60°) facilitates correct centring and clamping, reducing mounting variability and helping to maintain repeatable cutting conditions across batches. Coating and geometry that support chip control and tool life The RS chipbreaker geometry is optimised for controlled chip formation in turning operations and complements the AH8005 coating to prevent built-up edge on demanding alloys. A PVD coating contributes to thermal resistance at the cutting edge and improves abrasion resistance, which is particularly beneficial when machining materials that generate high temperatures. Together, geometry and coating reduce downtime and enable longer cutting intervals without sacrificing surface finish or dimensional stability. Application guidance and selection advice for reliable results Select the chipbreaker and grade according to the workpiece material, machining strategy and machine-tool stability; the RS option is recommended for general-purpose stable turning where predictable chip flow is essential. For best results, match the insert to a holder rated for RCMT geometry and ensure clamp torque and shim condition are correct. If tighter tolerances or interrupted cuts are involved, choose holders and clamping systems that provide additional rigidity to exploit the insert’s full potential while preserving surface quality and tool life. Contact Metav Werkzeuge for application-specific recommendations and to obtain the Tungaloy RCMT1606M0-RS AH8005 inserts; Metav Werkzeuge can advise on holder compatibility and supply options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6961501 SKU: 6961501-Tungaloy Manufacturer SKU: TUN6961501 Model series: ISO-Drehwendeschneidplatten ISO designation: 1606M0 Facts Diameter: 16 mm Thickness: 6.35 mm Relief angle: 7° Corner radius: 0 mm Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Special features Material: carbide Coating / Grade: PVD-coated AH8005 Chipbreaker: RS Plate form: round Application: turning (external and internal) System composition: ISO insert, suitable outer holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert suited for? The RCMT1606M0-RS AH8005 Tungaloy indexable insert is optimised for heat-resistant alloys and other hard materials where wear resistance and thermal stability are required. Which chipbreaker does the insert use and why? This insert features the RS chipbreaker, chosen to provide controlled chip formation and reliable evacuation during standard turning operations. What are the key dimensional features for mounting? The RCMT1606M0-RS has a 16 mm diameter, 6.35 mm thickness, a 7° relief angle and a cylindrical hole with a one-sided countersink (40°–60°) to ensure secure, repeatable clamping in compatible ISO holders. Is the insert suitable for both external and internal turning? Yes, the RCMT1606M0-RS AH8005 insert is designed for external and internal turning when paired with the appropriate holder or boring bar and correct clamping components. What advantages does the AH8005 PVD coating provide? The AH8005 PVD coating increases abrasion resistance and thermal stability at the cutting edge, which helps extend tool life and maintain surface quality when machining demanding alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 1606M0 AH8015 Wendeplatten - Tungaloy
Benefit from the PVD-coated AH8015 grade and the RS chipbreaker for stable cutting and broad material coverage; the ISO conformity and 7° clearance ensure consistent holder compatibility and reliable results. Order the RCMT1606M0-RS AH8015 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. RCMT 1606M0 AH8015 RCMT1606M0-RS Tungaloy turning insert — PVD-coated carbide, hole & 7° clearance The RCMT1606M0-RS AH8015 Tungaloy insert is an ISO-standard indexable turning insert designed for general turning of heat-resistant alloys and a wide range of engineering materials ISO turning insert RCMT1606M0-RS PVD-coated carbide AH8015 RS chipbreaker for controlled chips Cylindrical hole with countersink Consistent performance for demanding turning operations The combination of a PVD-coated carbide matrix and the AH8015 grade delivers a balance of wear resistance and edge stability that suits prolonged machining of heat-resistant alloys and mixed batches. Conformity to the ISO turning insert series means compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness, which simplifies holder selection and reduces setup errors. The PVD layer improves thermal resistance at the cutting edge, extending effective tool life under elevated cutting temperatures without sacrificing surface quality. Secure clamping and effective chip control for repeatable parts Designed with a cylindrical hole plus a single-side countersink (40°–60°) and a modest 7° clearance, the geometry supports secure clamping and repeatable seating in a range of external holders and boring bars. The RS chipbreaker is optimised for controlled chip formation during both external and internal turning, reducing nestling and minimising interruption to the machining cycle. With a plate diameter of 16 mm and a thickness of 6.35 mm, the insert offers a compact yet robust footprint that helps maintain stability in less rigid set-ups. Productivity through material versatility and straightforward selection The AH8015 grade is presented as a first choice for general machining of heat-resistant alloys, providing broad material coverage across stainless derivatives and alloyed steels typically encountered in aerospace and power-generation components. The insert’s neutral corner radius and chip control make it suitable for a variety of operations where consistent surface finish and tool life are priorities. For process planning, pairing this insert with the matching ISO-compatible holder, support pad and correct clamping screws yields improved cycle times and lower tooling costs per part. Technical guidance for material-specific parameter windows can be provided to ensure optimal cutting speeds and feeds. For application guidance or to discuss ordering Tungaloy AH8015 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and availability Technical data Article number: 6788824 Manufacturer SKU: TUN6788824 Label: RCMT1606M0-RS AH8015 Tungaloy-Wendeplatte Facts Model series: ISO-Drehwendeschneidplatten Application: Turning Material: Hartmetall Insert designation: RCMT1606M0-RS Thickness: 6.35 mm Inscribed circle: 16 mm Clearance angle: 7° Corner radius: 0 Special features Grade/coating: AH8015, PVD-coated carbide Chipbreaker: RS Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Plate form: round FAQ What materials is this insert best suited for? The RCMT1606M0-RS AH8015 insert is optimised for heat-resistant alloys and offers broad coverage for alloyed steels and stainless-type materials thanks to the PVD-coated carbide matrix. Which holders are compatible with this ISO insert? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the RCMT1606M0-RS fits ISO-compatible external holders and boring bars designed for 16 mm inscribed-circle inserts with 6.35 mm thickness. How does the RS chipbreaker improve machining? The RS chipbreaker on this grade produces controlled chips that reduce nestling and aid uninterrupted turning operations, improving process reliability and part quality. Is the insert suitable for internal and external turning? Yes, the insert’s geometry and chip control are suitable for both external and internal turning when combined with an appropriate holder and cutting parameters. What are the mounting features of the insert? The insert includes a cylindrical hole with a single-side countersink (40°–60°) designed for reliable seating and clamping in standard ISO insert holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 1606M0 T9215 Wendeplatten - Tungaloy
Reliable productivity and consistent tool life are delivered by the combination of CVD-coated carbide grade T9215 and an ISO indexable RCMT form, enabling productive turning of medium steel under continuous to light interrupted cuts. Order the inserts via Metav Werkzeuge or contact our specialists for application guidance. RCMT1606M0-RS T9215 – ISO indexable turning insert for Turning by Tungaloy RCMT1606M0-RS T9215 is an ISO indexable turning insert optimised for external and internal turning of medium steel, designed to deliver high wear resistance and breakage security in productive machining. CVD-coated carbide grade T9215 ISO indexable form RCMT 1606M0 7° clearance angle for stable cutting Cylindrical hole with 40°–60° countersink Higher productivity through wear-resistant grade and coating The T9215 grade combines a CVD-coated surface with a robust carbide substrate to extend tool life in medium steel turning. This composition increases wear resistance and offers improved fracture toughness, which reduces unplanned tool changes and downtime. For practical terms: the coating reduces abrasive wear at elevated cutting speeds, while the substrate resists chipping during light interruptions, leading to fewer indexings and steadier process output. Stable clamping and geometry for consistent surface finish The insert’s ISO geometry (RCMT1606M0) and round form provide a secure fit in compatible holders, aided by a cylindrical hole and a single‑sided countersink (40°–60°) that ensure reliable seating and clamping. With an inscribed circle of 16 mm, a thickness of 6.35 mm and a 7° clearance angle, this configuration reduces vibration and delivers predictable cutting forces, which benefits surface integrity and repeatable part tolerances in both external and internal turning operations. System compatibility and easy application selection Supplied as part of a standard ISO turning system, the insert works with matched outside holders or boring bars, a backing shim or clamp set and replacement screws. The RS chipbreaker is intended for continuous to slightly interrupted cuts and should be selected together with the T9215 grade to match workpiece stability and machining strategy. This approach simplifies tool choice, shortens set‑up time and supports a controlled chip form for safer, higher‑speed machining. For tailored advice on implementing RCMT1606M0‑RS T9215 inserts in production, or to request CAD and cutting data, contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt support and delivery options. Technical Data Article number: 6774010 Manufacturer SKU: TUN6774010 SKU: 6774010-Tungaloy Model series: ISO turning inserts Designation: RCMT1606M0-RS Core technical figures Inscribed circle: 16 mm Thickness: 6.35 mm Clearance angle: 7° Corner radius: 0 mm Design & special features Material: carbide Coating / grade: CVD, T9215 Chipbreaker: RS Shape: round Hole: cylindrical with single-sided countersink (40°–60°) ISO designation: RCMT1606M0-RS Application: turning (external and internal) FAQ Which materials is this insert best suited for? The RCMT1606M0‑RS T9215 insert from Tungaloy is specified as a first choice for medium steel machining, offering a balance of wear resistance and fracture toughness for productive turning. What is the function of the RS chipbreaker? The RS chipbreaker on the RCMT1606M0‑RS promotes controlled chip formation for continuous to light interrupted cuts, helping to maintain process stability and reduce rework. What are the key dimensions and mounting features? The insert has a 16 mm inscribed circle, 6.35 mm thickness, 7° clearance angle and a cylindrical hole with a 40°–60° single-sided countersink; article number 6774010 and manufacturer SKU TUN6774010 identify this specific variant. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 1606M0 T9225 Wendeplatten - Tungaloy
Combining the CVD-coated carbide T9225 grade with the RS chipbreaker and ISO compatibility, this insert offers robust, repeatable performance for medium to heavy steel turning and reliable chip control; order the RCMT1606M0-RS inserts directly via Metav Werkzeuge or consult our specialists for selection support. RCMT1606M0-RS T9225 Tungaloy — ISO turning insert for medium/heavy steel A RCMT1606M0-RS T9225 Tungaloy indexable turning insert engineered for stable, productive cutting in variable engagement conditions. ISO‑standard turn insert RCMT1606M0-RS CVD-coated carbide grade T9225 Robust universal grade for medium/heavy steel Round 16 mm plate, 6.35 mm thickness Cylindrical hole with 40°–60° countersink Reliable performance for medium to heavy steel turning The RCMT1606M0-RS provides a balance of toughness and wear resistance thanks to its CVD-coated carbide composition and the T9225 grade. Designed for turning operations where interrupted cuts or varying engagement demand increased fracture resistance, the insert reduces unexpected tool failure and extends usable tool life. The RS chipbreaker promotes predictable chip formation under moderate to heavy cut depths, which leads to fewer process stops and more consistent cycle times. Measurable gains in productivity stem from the combination of material, coating and chip control rather than from unverified claims. Seamless integration into ISO tooling systems As an ISO-design insert, compatibility is defined by shape, clearance angle, tolerance class, fastening method, size and thickness. The insert’s round form with a diameter of 16 mm and a plate thickness of 6.35 mm ensures a defined seating height for compatible holders and boring bars. The central cylindrical hole with a single-sided countersink (40°–60°) provides secure clamping and repeatable orientation in standard pockets. A 7° clearance angle supports ground cutting edges while a corner radius of 0 mm allows for fine finishing and tight radii where required. Operational advantages that support process stability Selecting the correct chipbreaker and grade reduces downtime and enhances surface finish control; the RS chipbreaker is tuned for general-purpose steel applications, offering stable swarf evacuation and reduced tendency for long, tangled chips. The robust T9225 grade maintains edge integrity under fluctuating cutting forces, aiding consistent component tolerances and fewer insert changes. For workshop managers and process engineers, these technical characteristics translate into lower tooling-related interruptions and more predictable throughput without sacrificing surface quality. Contact Metav Werkzeuge for tailored advice and to secure original Tungaloy RCMT1606M0-RS inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781165 SKU: 6781165-Tungaloy Manufacturer SKU: TUN6781165 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Numbers / Core data ISO code: 1606M0 Plate size: 16 mm Plate thickness: 6.35 mm Clearance angle: 7° Corner radius: 0 mm Countersink angle: 40°–60° Design / Special features Material: carbide (CVD-coated) Grade: T9225 Chipbreaker: RS Plate form: round Hole style: cylindrical hole with single-sided countersink Application: turning FAQ What materials is this insert suitable for? The RCMT1606M0-RS in grade T9225 is intended primarily for steel machining and performs well in medium to heavy cutting where higher toughness is required. Which chipbreaker is fitted and what is its purpose? The insert features the RS chipbreaker, optimised for general turning to produce stable chips and support reliable evacuation in varied cutting conditions. How is the insert clamped in a holder? Clamping relies on the ISO seat geometry together with the central cylindrical hole and single-sided countersink (40°–60°) to ensure secure, repeatable positioning. Which dimensions are essential when selecting a compatible holder? Key values to match are the 16 mm plate size, 6.35 mm thickness and the 7° clearance angle to guarantee proper seat engagement and tool projection. Is this an original Tungaloy product? This article is supplied as an original, brand-new Tungaloy insert, listed under SKU 6781165-Tungaloy and manufacturer SKU TUN6781165. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 2006M0 AH8005 RS Wendeplatten - Tungaloy
Take advantage of the PVD‑coated carbide AH8005 and ISO compatibility for consistent, long‑life performance; the RS chipbreaker and round form provide reliable chip control for external and internal turning. Order the RCMT2006M0‑RS AH8005 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. RCMT2006M0‑RS AH8005 indexable insert — PVD‑coated carbide, RS chipbreaker, for turning by Tungaloy The RCMT2006M0‑RS AH8005 is an ISO‑standard round indexable insert designed for external and internal turning, engineered for stable machining of heat‑resistant alloys and hard materials. RCMT round insert, 20 mm diameter PVD‑coated carbide AH8005 for heat resistance RS chipbreaker for stable chip control 7° clearance, 6.35 mm thickness Predictable fit and process reliability for series production The round indexable insert is manufactured to ISO tolerances so that holder compatibility is predictable across standard toolholders. Because form, clearance, tolerance class, fastening and thickness determine the assembly, the insert is selected for machines and clamping systems where reproducible seating matters. This reduces set‑up time and variance between shifts, which is crucial for batch production. The result is fewer rejected parts, lower rework rates and a more stable machining process overall. Coating and grade that extend cutting intervals The combination of PVD‑coating and the carbide AH8005 grade is aimed at wear resistance in elevated temperatures and abrasive conditions. For turning heat‑resistant alloys and harder steels, the coating reduces flank wear and preserves the cutting edge for longer, allowing higher cutting speeds under stable conditions. Longer tool life translates into fewer insert changes and less downtime, improving cost per component in continuous operations. Geometry and chip control to support secure machining The round form with RS chipbreaker delivers predictable chip formation in both external and internal turning, while the cylindrical hole with single‑sided countersink (40°–60°) ensures reliable mounting and torque transmission. With a 20 mm diameter, 6.35 mm thickness and 7° clearance, the indexable insert is optimised for rigidity and vibration damping in conventional and heavy finishing cuts. This geometry supports consistent surface finish and helps maintain dimensional accuracy in serial production. For application advice, availability or to match the insert to a suitable turning holder, contact Metav Werkzeuge for technical guidance and prompt delivery. Technical data Article number: 6967054 Manufacturer SKU: TUN6967054 SKU: 6967054-Tungaloy Model series: ISO‑turning indexable inserts Manufacturer item name: RCMT2006M0‑RS AH8005 Tungaloy insert Numbers / Core technical data Diameter: 20 mm Thickness: 6.35 mm Clearance angle: 7° Corner radius: 0 mm Design / Special features ISO designation: RCMT2006M0‑RS Chipbreaker: RS Coating: PVD Material: Carbide Hole: cylindrical hole with single‑sided countersink (40°–60°) FAQ What materials are suitable for this insert? The RCMT2006M0‑RS AH8005 insert is designed for heat‑resistant alloys and harder materials; the PVD‑coated carbide grade provides wear resistance under elevated temperatures. Can the insert be used for both external and internal turning? Yes, the round geometry and RS chipbreaker make the insert suitable for both external and internal turning operations when paired with the correct holder. How does the RS chipbreaker affect chip control? The RS chipbreaker on this insert promotes short, controlled chips in a range of cutting conditions, reducing the risk of entanglement and improving process stability. What determines whether the insert fits a particular holder? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure seating and consistent clamping. Is this insert suitable for finish cuts or more for roughing? With its PVD coating and stable geometry, the insert performs well in finishing and semi‑finishing where a consistent surface finish and tool life are required. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
RCMT 2006M0 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD‑coated AH8015 carbide and the RS chipbreaker for stable chip control when turning heat‑resistant alloys; the ISO RCMT2006M0 geometry with 7° clearance ensures secure seating and predictable cutting performance. Order the RCMT2006M0‑RS AH8015 Tungaloy indexable insert directly via Metav Werkzeuge or consult our technical advisors for application guidance. RCMT 2006M0 AH8015 — RCMT2006M0‑RS Tungaloy ISO turning insert (PVD‑coated carbide) A RCMT2006M0‑RS AH8015 indexable turning insert engineered for external and internal turning of heat‑resistant alloys in ISO clamped holders PVD‑coated AH8015 grade for heat alloys Consistent chip control with RS chipbreaker ISO RCMT2006M0 round insert 7° clearance; cylindrical hole + countersink Predictable performance in demanding turning operations The PVD‑coated AH8015 grade offers a balance of wear resistance and edge stability that suits extended runs and intermittent cuts. The coating reduces adhesion and flank wear while the fine‑grained carbide substrate preserves a sharp cutting edge, which translates into longer tool life and more consistent surface quality. Such material and coating pairing is particularly beneficial when machining alloys that tend to work‑harden or generate high temperatures, as it lowers the frequency of tool changes and contributes to steady cycle times. Secure clamping and precise seating for reliable results Compatibility with ISO clamping systems is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The round geometry combined with a cylindrical hole and a single‑side countersink (40°–60°) enables secure axial positioning and reliable torque transfer in the toolholder. The 7° clearance reduces flank contact during feed, limiting friction and heat build‑up at the cutting zone. Together these features support repeatable set‑up and minimise vibration, which improves dimensional stability on serial components. Controlled chip formation and improved productivity The RS chipbreaker is designed to produce short, manageable chips across a broad range of cutting conditions, supporting uninterrupted turning operations and safer chip evacuation. For turning applications on heat‑resistant alloys this translates into fewer machine stoppages and reduced cycle variability. The ISO‑standard RCMT geometry allows quick index changes in compatible holders, favouring cost‑effective tooling strategies and predictable process performance for batch production and mixed‑material workloads. For machining tasks that require stable cutting in heat‑resistant alloys, request the Tungaloy RCMT2006M0‑RS AH8015 insert from Metav Werkzeuge — technical consultation and order placement are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6787910 SKU: 6787910‑Tungaloy Manufacturer SKU: TUN6787910 Model series: ISO turning inserts Type designation: RCMT2006M0‑RS Facts Insert size: 20 mm Insert thickness: 6.35 mm Clearance angle: 7° Corner radius: 0 mm Hole: with hole; cylindrical hole + one‑side countersink (40°–60°) Special features Shape: round Chipbreaker: RS Grade: AH8015 Coating: PVD Material: carbide Application: turning Compatibility: ISO clamped insert system Manufacturer: Tungaloy FAQ What materials is this insert suited for? The RCMT2006M0‑RS AH8015 insert is formulated for heat‑resistant alloys and a broad range of steels where a balance of wear resistance and edge stability is required. How does the RS chipbreaker improve machining? The RS chipbreaker on the RCMT2006M0‑RS promotes stable chip formation, reducing interruptions and facilitating safe chip evacuation during turning operations. Is this insert compatible with standard ISO holders? Yes, the RCMT2006M0‑RS conforms to ISO geometry; compatibility depends on holder form, clearance, tolerance class and fastening method. What does the cylindrical hole and countersink provide? The cylindrical hole with a single‑side countersink (40°–60°) secures axial positioning and enables consistent clamping force in compatible toolholders, improving repeatability. Can this insert be used for internal as well as external turning? The RCMT2006M0‑RS AH8015 is suitable for both external and internal turning applications when mounted in an appropriate ISO‑compatible holder. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
RCMT 2006M0 T9225 Wendeplatten - Tungaloy
Benefit from the combination of robust T9225 CVD coating, ISO conformity and straightforward clamping compatibility for reliable medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult the specialists for selection and system matching. RCMT 2006M0 T9225 RCMT turning insert for turning – Tungaloy RCMT2006M0-RS T9225 Tungaloy insert is an ISO-form indexable insert engineered for external and internal turning of steel, offering toughness for interrupted cuts and consistent performance in medium-to-heavy machining. ISO-form indexable insert, round 20 mm T9225 CVD-coated carbide for steel 7° clearance angle, zero corner radius Cylindrical hole with 40°–60° countersink Longer tool life and reliable cutting under demanding steel conditions The combination of T9225 and CVD-coated carbide provides a balance of wear resistance and toughness designed for medium-to-heavy steel operations. This grade was developed to cope with variable engagement conditions and light interruptions in the cut, so the insert delivers longer tool life and predictable performance under changeable loads. The result is fewer tool changes, reduced downtime and an overall improvement in machine uptime and throughput. The hardened coating supports consistent surface finish while resisting flank wear, translating directly into lower operating costs over a production cycle. Fast and predictable assembly thanks to ISO form and defined geometry Manufactured to ISO form, the insert’s geometry and dimensions ensure compatibility with standard toolholders when shape, clearance, tolerance class, clamping and thickness are matched. The 20 mm round profile, 6.35 mm thickness and 7° clearance angle provide stable seating and repeatable engagement. The central cylindrical hole with a single-sided countersink (40°–60°) simplifies clamping and reduces the risk of misalignment during insert changes. Specifying the correct holder and clamping set for an ISO insert like this reduces setup time, improves concentricity and preserves tool life — particularly important for batch production or mixed-operation shops. Controlled chip formation and process security for efficient turning The RS chipbreaker geometry offers controlled chip flow on a wide range of steels, minimising entanglement and improving evacuation from the cut. That control supports higher machining feeds and safer operation, while maintaining surface quality for external and internal turning applications. Combined with the insert’s toughness, this chip control contributes to greater process security and repeatability from part to part. For operations seeking a pragmatic balance between productivity and reliability, this insert is a suitable choice; its design supports productive machining strategies without sacrificing stability at higher depths of cut. Contact Metav Werkzeuge today for tailored advice on holder compatibility and to request the matching clamping set; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781137 Manufacturer SKU: TUN6781137 SKU: 6781137-Tungaloy Facts Insert designation (ISO): 2006M0 Diameter: 20 mm Thickness: 6.35 mm Clearance angle: 7° Corner radius: 0 mm Countersink angle: 40°–60° Hole: with hole (cylindrical) Special features Material: carbide Coating/grade: T9225 CVD Chipbreaker: RS Geometry: round insert Application: external and internal turning Compatibility: ISO holders (shape, relief, tolerance, clamping, size) FAQ What materials is this insert intended for? The RCMT2006M0-RS T9225 insert is intended primarily for machining steel, including alloyed steels, where medium-to-heavy cuts or intermittent engagement demand greater toughness from the cutting edge. Which dimensions and angles are relevant for holder selection? Key dimensions are the ISO designation 2006M0, diameter 20 mm, thickness 6.35 mm and clearance angle 7°; the zero corner radius and the cylindrical hole with a 40°–60° single-sided countersink are also relevant for correct clamping and seating. How does the RS chipbreaker influence machining results? The RS chipbreaker provides predictable chip control that reduces chip entanglement and supports improved surface finish, enabling higher feed rates with maintained process stability during external and internal turning. Is the insert suitable for interrupted cuts and mixed engagement conditions? Yes, the T9225 grade is a robust universal sort engineered for situations with changing engagement or light interruptions; its CVD-coated carbide substrate delivers the toughness required in such conditions. What should be checked when replacing an insert in an existing tool system? Ensure the holder matches the insert’s ISO form, clearance and clamping method; check seat cleanliness, confirm the countersink/hole alignment and apply the manufacturer’s recommended clamping torque to achieve repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 2507M0 AH8005 Wendeplatten - Tungaloy
Take advantage of PVD-coated AH8005 wear resistance and a secure cylindrical hole with countersink for consistently stable turning results. Combine long tool life, ISO compatibility and straightforward holder matching for efficient production; order via Metav Werkzeuge or consult the team for application advice. RCMT2507M0-RS AH8005 Tungaloy turning insert — ISO 2507M0, PVD-coated carbide A RCMT2507M0-RS AH8005 Tungaloy insert engineered for external and internal turning of heat-resistant alloys and hard materials in stable machining setups PVD-coated carbide grade AH8005 For heat‑resistant alloys and hard materials ISO round insert, 25 mm diameter, 7.94 mm thick Cylindrical hole with single‑side countersink Longer tool life through optimised coating and substrate The indexable insert is supplied in a PVD-coated cemented carbide grade designed for elevated temperatures and abrasive conditions. The AH8005 grade provides a balance between wear resistance and toughness, so the insert maintains cutting-edge integrity during sustained cuts in demanding alloys. Paired with the chipbreaker RS, the geometry controls chip flow under stable setups, reducing the frequency of tool changes and improving overall process economy. This translates into fewer machine stops and predictable batch output when compared with uncoated or lower-grade alternatives. Predictable clamping and dimensional conformity for repeatable finishes Compliant with ISO form and size conventions, the round insert presents a 25 mm nominal size and a plate thickness of 7.94 mm, matched to the ISO code 2507M0. A 7° clearance angle and a cylindrical hole with a single‑side countersink (40°–60°) allow secure engagement in standard clamping systems and reduce the risk of micro‑movement during machining. Compatibility to specific holders is defined by form, clearance, tolerance class, fastening method, size and thickness; selecting a correctly rated external holder or boring bar and the appropriate shim/clamp set ensures repeatable surface quality and minimises vibration that would otherwise affect dimensional accuracy. Practical guidance for application and system setup Typical use covers external and internal turning where stable cutting conditions prevail. Choice of chipbreaker and grade should follow the workpiece material and the rigidity of the machining setup: the RS chipbreaker is suited to controlled chip formation under steady feed and depth of cut. The insert forms part of a system that includes a matched holder, underlay/clamp set and replacement screws for safe mounting. For economical operation, match the insert to a holder with correct seat geometry and apply the recommended clamp torque; this protects the cutting edge, prolongs lifetimes and helps maintain consistent component tolerances. Technical consultation is available for optimising insert selection for a given workpiece and machine combination. Contact Metav Werkzeuge for bespoke application advice on Tungaloy PVD inserts and to check stock availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6967055 Manufacturer SKU: TUN6967055 SKU: 6967055-Tungaloy Model series: ISO turning indexable inserts ISO designation: 2507M0 Facts Insert shape: round Diameter: 25 mm Thickness: 7.94 mm Clearance angle: 7° Corner radius: 0 Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Grade/coating: AH8005, PVD‑coated cemented carbide Chipbreaker: RS Application: turning (external and internal) Typical system: insert + matching external holder or boring bar + underlay/clamp set and replacement screws Suitability: designed for heat‑resistant alloys and hard materials in stable machining FAQ What materials is this insert suitable for? The RCMT2507M0‑RS AH8005 Tungaloy insert is specified for heat‑resistant alloys and hard materials, offering wear resistance in demanding turning operations. How does the insert secure to a holder? Clamping is achieved via the cylindrical hole with a single‑side countersink; compatibility with a specific holder depends on form, clearance, tolerance class, fastening method, size and thickness of the assembly. What does the AH8005 designation indicate? AH8005 denotes a PVD‑coated cemented carbide grade optimised for wear resistance at elevated temperatures while retaining sufficient toughness for stable cuts. Is the RS chipbreaker suitable for roughing operations? The chipbreaker RS is intended to control chip formation in stable machining contexts; suitability for heavy roughing depends on machine rigidity and selected cutting parameters. Which components are required to build a complete cutting system? A complete system generally comprises the indexable insert, a compatible external holder or boring bar, an underlay/clamp set and the appropriate replacement screws for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 2507M0 AH8015 Wendeplatten - Tungaloy
Take advantage of balanced wear resistance and edge stability combined with ISO compatibility for straightforward integration into existing holder systems; order genuine Tungaloy indexable inserts directly via Metav Werkzeuge or consult our specialists for customised recommendations. RCMT2507M0-RS AH8015 Tungaloy indexable turning insert — PVD-coated carbide for turning RCMT2507M0-RS AH8015 Tungaloy indexable turning insert is an ISO-design insert for external and internal turning, optimised for heat-resistant alloys and general machining applications PVD-coated carbide AH8015 ISO RCMT form for holder compatibility Chipbreaker RS for controlled chips 7° clearance angle, cylindrical hole Round 25 mm plate, 7.94 mm thickness Greater process reliability through coating and grade The combination of PVD-coated carbide and the AH8015 grade delivers a well-balanced mix of wear resistance and edge robustness that suits demanding materials. This composition reduces flank and crater wear under elevated temperatures, which extends tool life and maintains consistent part quality over longer runs. For production environments processing heat-resistant alloys, the result is fewer interruptions, more predictable tooling cycles and improved overall equipment effectiveness. Simple adoption with ISO RCMT geometry and secure clamping The ISO RCMT form ensures straightforward compatibility with standard RCMT holders when form, clearance angle, tolerance class, fastening, size and thickness match. The insert’s cylindrical hole with a single-sided countersink (40°–60°) provides reliable centring and positive clamping in the pocket, while the 25 mm diameter and 7.94 mm thickness add mechanical rigidity. Integration into existing tool stations is therefore quick, lowering setup time and reducing the need for special fixtures. Reliable chip control and geometry for precise turning Equipped with the chipbreaker RS, this insert promotes predictable chip formation and evacuation, which aids surface finish and tool performance when turning challenging alloys. The geometry with a 0 corner radius enables fine finishing and tight tolerance cuts; the 7° clearance angle prevents rubbing and reduces cutting forces. Together these attributes improve dimensional consistency and reduce secondary operations, making the insert suitable for both finishing passes and light-medium turning tasks when paired with the correct machining parameters. Discuss Tungaloy AH8015 inserts and suitable chipbreakers with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advising and availability Technical data Article number: 6912297 SKU: 6912297-Tungaloy Manufacturer SKU: TUN6912297 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Facts Plate thickness: 7.94 mm Plate size: 25 mm Clearance angle: 7° Corner radius: 0 Hole style: cylindrical hole + single-sided countersink (40°–60°) Shape: round Special features Material: carbide Coating: PVD Grade: AH8015 Chipbreaker: RS ISO designation: RCMT2507M0-RS Application: external and internal turning Optimised for heat-resistant alloys Compatible with standard RCMT holders FAQ Which materials is this insert suitable for? The RCMT2507M0-RS AH8015 Tungaloy indexable insert (SKU 6912297-Tungaloy) is principally intended for heat-resistant alloys and general machining where a balance of wear resistance and edge stability is required. How is compatibility with holders ensured? Compatibility depends on matching the RCMT form, clearance angle, tolerance class, fastening method, plate size and thickness; the RCMT geometry of this insert follows ISO standards for easy integration. What does the RS chipbreaker provide? The chipbreaker RS on this insert controls chip form and evacuation to support consistent surface finish and secure cutting conditions when machining tricky alloys. What is the clamping/hole specification? This insert is supplied with a cylindrical hole and a single-sided countersink at 40°–60°, designed for stable centring and positive clamping in compatible tool holders. When is a corner radius of 0 recommended? A 0 corner radius suits fine finishing and close-tolerance turning; for heavy roughing, a larger radius is advised to increase edge strength and distribute cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RCMT 2507M0 T9225 Wendeplatten - Tungaloy
Combining CVD-coated carbide T9225 with an RS chipbreaker, this ISO round insert offers robust performance for medium to heavy steel turning and resilience under slightly interrupted cuts. The RCMT2507M0‑RS form and 7° clearance ensure secure seating in standard holders, reducing set-up time. Order this insert directly via Metav Werkzeuge or consult our specialists for tailored holder recommendations. RCMT2507M0 T9225 ISO turning insert (CVD-coated carbide) — Tungaloy The RCMT2507M0‑RS T9225 is an ISO-indexable turning insert designed for turning operations, providing a universal grade for medium to heavy steel machining with optimised chip control and reliable tool life. CVD-coated carbide grade T9225 Robust universal grade for medium–heavy steel ISO round insert, 25 mm diameter Cylindrical hole with single-side countersink 40°–60° Consistent cutting performance under variable conditions The combination of CVD-coated carbide and the T9225 grade delivers a balanced mix of wear resistance and toughness, specifically tuned for steel turning where cutting conditions can change. The RS chipbreaker promotes controlled chip formation, reducing the risk of built-up edge and improving surface finish. For operations that include light interruptions or variable engagement, this composition maintains cutting stability and extends tool life, which in turn lowers overall machining costs and increases output reliability. Geometry and mounting that save set-up time and ensure accuracy Engineered as an ISO round insert with a 25 mm diameter and a 7.94 mm thickness, the geometry of the component supports secure clamping and repeatable positioning. The insert features a 7° clearance angle and a cylindrical hole with a single-side countersink (40°–60°) to match common clamping systems; compatibility with a holder is determined by form, clearance, tolerance class, fastening and thickness. These attributes simplify tool changes, reduce fixture adjustments and help achieve consistent dimensional results across batches. Versatility for production and inventory efficiency As a universal grade for medium to heavy steel, the insert reduces the need for multiple, specialised grades in stock. The T9225 composition and RS chipbreaker maintain cutting stability across a range of feeds and speeds, allowing the same insert to be applied to roughing and semi-finishing tasks. Predictable wear patterns make tool-life planning straightforward, supporting process optimisation and improved machine utilisation. The overall effect is a pragmatic boost in productivity and cost-effectiveness for everyday turning applications. For procurement or detailed technical matching of the Tungaloy RCMT2507M0‑RS T9225 turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and holder recommendations. Technical data Article number: 6781218 Manufacturer SKU: TUN6781218 SKU: 6781218-Tungaloy Facts Plate form: round Plate diameter: 25 mm Plate thickness: 7.94 mm Clearance angle: 7° Corner radius: 0 mm Special features CVD-coated carbide Grade: T9225 Chipbreaker: RS ISO designation: RCMT2507M0‑RS Hole style: cylindrical hole with single-side countersink (40°–60°) Typical application: turning (outside and inside) FAQ Which materials is this insert suited for? The RCMT2507M0‑RS T9225 insert is specified primarily for steel machining; the T9225 grade provides robust performance for medium to heavy steel turning. How does the RS chipbreaker affect chip control? The RS chipbreaker on this Tungaloy insert shapes chips to reduce entanglement and improve evacuation, supporting better surface finish and safer machining. What mounting features ensure compatibility with holders? Compatibility depends on form, clearance, tolerance class, fastening, size and thickness; the insert’s cylindrical hole with single-side countersink (40°–60°) and ISO RCMT form are designed for standard clamping systems. Can this insert handle interrupted cuts? Yes, the T9225 grade combines toughness with wear resistance to tolerate slightly interrupted cuts and variable engagement in turning operations. What is the manufacturer SKU and article number for ordering? The manufacturer SKU is TUN6781218 and the article number is 6781218 for the Tungaloy RCMT2507M0‑RS T9225 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDCA 2004TN UX30 Wendeplatten - Tungaloy
Benefit from a combination of a sharp cutting edge, the UX30 uncoated carbide grade and a 15° relief angle that together reduce cutting forces and promote consistent chip formation for stable milling results; order the insert directly via Metav Werkzeuge or ask our consultants if needed. RDCA 2004TN UX30 indexable insert for milling — Tungaloy The RDCA2004TN UX30 is an indexable insert engineered for Tungaloy milling systems, offering a round form and precise geometry for face, shoulder, slot and high-feed milling operations. Sharp edge for low cutting forces UX30 uncoated carbide for consistent chip control Round 20 mm plate, 4.76 mm thickness, cylindrical hole Proven performance with reduced cutting forces The RDCA2004TN UX30 indexable insert combines an uncoated carbide composition with a deliberately sharp cutting edge to lower cutting resistance and improve chip flow. The result is a more efficient metal-removal process under moderate cutting conditions, which reduces spindle load and can extend the interval between tool changes. The 15° relief angle helps to minimise flank contact, while the geometry promotes reliable chip formation across a range of feeds, delivering measurable process stability for production environments that prioritise consistent throughput. Straightforward fit and predictable replacement Designed for seamless integration into compatible Tungaloy milling bodies, the insert’s round form with a cylindrical hole ensures secure seating and repeatable positioning. The nominal dimensions — 20 mm diameter and 4.76 mm plate thickness — are tailored for tool families that accept the 2004TN designation, so mechanical fit and clamping must match the cutter body and seat geometry. Where precise interchangeability is required, verify the toolholder and clamping screw specification; correct matching avoids runout and guarantees the expected surface finish and tool life. Shop-floor benefits and economical productivity On the shop floor, the combination of the UX30 grade and the insert’s geometry delivers reduced burr formation and easier chip evacuation, which cuts down on post-processing and inspection time. The uncoated carbide construction offers a reliable edge for operations where lower cutting forces and good chip formation are priorities rather than extreme thermal or abrasive conditions. This makes the insert a practical choice for job shops and production lines seeking a balance between machining efficiency and predictable component quality. Supportive process documentation and selection guidance further assist production engineers in achieving consistent results. For low-force, consistent milling choose the Tungaloy RDCA2004TN UX30 indexable insert and contact Metav Werkzeuge for tailored recommendations and matching tool bodies at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6805875 SKU: 6805875-Tungaloy Manufacturer SKU: TUN6805875 Series: Fräswendeschneidplatten Material: Hartmetall Grade: UX30 Dimensions / Core data Diameter: 20 mm Thickness: 4.76 mm Relief angle: 15° Design & special features Round plate with cylindrical hole With hole (zylindrisches Loch) Uncoated carbide construction No chipbreaker (ohne Spanbrecher) Intended for milling (Fräsen): face, shoulder, slot, high-feed and contour milling depending on tool family Designed for Tungaloy milling systems; seat, geometry and cutter body must match FAQ What milling operations suit this insert best? The RDCA2004TN UX30 indexable insert (SKU 6805875-Tungaloy) is suitable for face, shoulder, slot, high-feed and contour milling depending on the assigned tool family and cutter body. Which materials are recommended for machining with this grade? The UX30 uncoated carbide is chosen for applications prioritising low cutting forces and good chip formation; it performs well on general steels and similar materials where an uncoated grade is appropriate. How is the insert secured in the cutter body? The insert uses a round form with a cylindrical hole and must be mounted in a compatible Tungaloy milling body with the correct clamping screw and seat geometry to ensure repeatable positioning. Is there a chipbreaker on this insert? No; the specification indicates the insert is supplied without a chipbreaker, so process parameters should be set accordingly to achieve controlled chip formation. What should be checked before installation? Confirm that the cutter body, seat geometry and clamping screw correspond to the 2004TN designation and that the 20 mm diameter and 4.76 mm thickness match the tool family to avoid fit issues and ensure expected performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDCM 1203TN UX30 Wendeplatten - Tungaloy
Take advantage of the sharp cutting geometry and the UX30 uncoated carbide grade to reduce cutting forces and improve chip control in a wide range of milling operations; the insert’s round 12 mm form and cylindrical hole allow straightforward integration into Tungaloy milling bodies, enabling consistent performance and faster tool changes — order directly via Metav Werkzeuge or consult our specialists for application advice. RDCM1203TN UX30 RDCM indexable milling insert by Tungaloy — uncoated carbide, round 12 mm The RDCM1203TN UX30 is a round indexable insert for Tungaloy milling systems, designed for face, shoulder, slot, high-feed and profile milling where low cutting forces and reliable chip formation are essential. Sharp cutting edge for low cutting forces UX30 grade for consistent chip formation Round 12 mm geometry for versatile milling Compatible with Tungaloy milling systems Precision milling with lower cutting forces The combination of the UX30 grade and uncoated carbide substrate delivers a sharp cutting edge tailored to minimise cutting forces while maintaining durable performance. This results in reduced spindle load and more stable machining when working with conventional and higher-feed strategies. The result is a measurable improvement in cycle stability and a lower likelihood of edge chipping during interrupted cuts, which supports predictable process outputs and higher first-pass quality. Secure fit and fast indexability for production use Designed to be used within matching Tungaloy tool bodies, the insert’s round 12 mm geometry and cylindrical hole ensure a consistent seating position and straightforward clamping. With a 3.18 mm plate thickness and 15° free clearance, the geometry contributes to reliable cutting engagement and simple index changes, reducing operator time during tool swaps. Clear component matching of seat, geometry and cutter body is required to guarantee the advertised performance and repeatability. Stable chip control and broad application range The single-sided chipbreaker provides targeted chip control during machining, improving evacuation in slotting or shoulder passes and preventing entanglement in continuous cuts. This makes the insert suitable for face milling, shoulder milling and slot milling, as well as contour and high-feed operations depending on the assigned cutter family. The chip control behaviour of the grade supports consistent surface finish and lowers rework rates in series production. Practical material choice for predictable results Manufactured from high-quality carbide, the insert is intentionally uncoated to favour applications where low cutting forces and crisp chip separation are desired. This selection reduces the thermal and mechanical loads that can build on coated edges in some light-to-medium-duty milling tasks, offering a pragmatic balance between tool life and machining economy. When integrated into an appropriately matched milling system, the component contributes to reproducible surface finish and efficient material removal. For reliable, low-force milling with Tungaloy UX30 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for availability and tailored application advice Technical data Article number: 6805876 Manufacturer SKU: TUN6805876 Model series: Fräswendeschneidplatten Manufacturer: Tungaloy Facts Thickness: 3.18 mm Diameter: 12 mm Free clearance angle: 15° Manufacturer article number: 6805876 Special features Grade: UX30 Material: carbide (uncoated) Plate shape: round Hole: with cylindrical hole Chipbreaker: one-sided Typical applications: face, shoulder, slot, high-feed and profile milling System requirement: plate seat and cutter body must match Tungaloy system geometry FAQ What materials is this insert intended for? The RDCM1203TN UX30 insert is optimised for general milling applications where low cutting forces and good chip formation are priorities; material suitability depends on the chosen cutter body and machining parameters. How does the UX30 grade affect machining performance? The UX30 grade on this indexable insert provides consistent chip formation and a sharp cutting edge, improving stability and reducing cutting forces during many milling operations. Is the insert compatible with non-Tungaloy cutter bodies? Compatibility requires that the plate seat, geometry and milling body match exactly; the insert is designed for use in Tungaloy milling systems and identical seating is necessary for correct clamping and performance. What is the function of the one-sided chipbreaker? The one-sided chipbreaker supports controlled chip formation and evacuation, especially useful in slotting and shoulder passes to improve surface finish and reduce chip re-cutting. Which sizes and angles are available on this article? This article features a round 12 mm plate with a thickness of 3.18 mm and a 15° free clearance angle; for other sizes or geometries consult the cutter family specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDCN 2004TN UX30 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge (UX30), uncoated carbide construction and a 15° relief angle for predictable chip formation and low cutting forces; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. RDCN2004TN UX30 Tungaloy indexable insert for milling, round 20 mm, 15° relief The RDCN2004TN UX30 is a round indexable insert designed for Tungaloy milling systems, tailored for plan, shoulder, slot and high-feed milling applications where low cutting forces and controlled chip formation are priorities. Sharp cutting edge for low cutting forces Uncoated carbide grade UX30 for reliable chip formation Round 20 mm insert, 4.76 mm thickness 15° relief angle for versatile milling Higher productivity through reduced cutting forces The round insert delivers a combination of geometry and material that reduces instantaneous cutting resistance, translating into more stable machining and lower spindle loads. Made from carbide and specified as an uncoated UX30 grade, the design promotes a sharp cutting edge that keeps cutting forces low and helps maintain consistent tool engagement during pocketing and contour passes. For productive milling operations this means fewer interruptions for tool changes and a steadier process window, particularly on components where minimising deflection is critical. Consistent chip control and process reliability Chip formation is a decisive factor in milling productivity; the UX30 grade has been selected for its balance between edge sharpness and chip behaviour. The insert’s geometry supports uniform swarf evacuation without relying on a chipbreaker, making it suitable for materials and operations where controlled, string-like chips are preferred. The combination of round 20 mm diameter and 4.76 mm thickness affords good contact stability in the cutter pocket, while the 15° relief angle optimises shear performance and reduces rubbing at the flank, improving surface finish and repeatability. Practical compatibility, handling and economic aspects The insert is intended for use in Tungaloy milling systems where the insert seat, geometry and cutter body must be technically compatible. A typical system comprises the cutter body, the indexable insert, a clamping screw and, if required, a shim. Installation is straightforward when the correct seat and clamp are used, and the uncoated carbide construction simplifies regrinding or inspection routines. Economically, the insert supports a productive machining strategy by favouring low cutting forces and predictable chip flow, which can reduce downstream rework and improve machine uptime. For reliable, productive milling with Tungaloy technology, request availability of the RDCN2004TN UX30 from Metav Werkzeuge or seek targeted application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6805878-Tungaloy Manufacturer item number: 6805878 Manufacturer SKU: TUN6805878 Brand: Tungaloy Model series: milling indexable inserts Dimensions & core data Insert diameter: 20 mm Thickness: 4.76 mm Relief angle: 15° Shape: round Designation: RDCN2004TN Materials & features Material: carbide Grade/coating: UX30 (uncoated) Application: milling Chipbreaker: none Hole: without hole Typical system components: cutter body, indexable insert, clamping screw, shim where applicable FAQ What materials is this insert suited for? The RDCN2004TN UX30 is optimised for applications prioritising low cutting forces and controlled chip formation; the uncoated carbide grade is versatile across a wide range of steels and general machining tasks where sharp edges are beneficial. Does the insert require a chipbreaker for safe operation? No, this round insert is specified without a chipbreaker; the UX30 grade and geometry are chosen to promote stable chip formation without an integrated chip control element. Which milling systems are compatible with this insert? Compatibility is determined by the cutter body and seat geometry; the insert is designed for use in Tungaloy milling systems where plate seat, geometry and cutter body match the RDCN2004TN specification. How does the 15° relief angle affect cutting performance? The 15° relief reduces flank contact and rubbing, improving shear conditions and surface finish while contributing to lower cutting forces during interrupted and continuous milling operations. What is the exact designation and SKU for ordering? The product is listed as RDCN2004TN UX30, manufacturer item number 6805878 and manufacturer SKU TUN6805878 for ordering and reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDKN 2004FN TH10 Wendeplatten - Tungaloy
Take advantage of the combination of precise cutting, low cutting forces and easy integration into Tungaloy milling systems for a smooth machining process. Order the RDKN2004FN TH10 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. RDKN2004FN TH10 — Tungaloy indexable milling insert (uncoated carbide, 15° relief) The RDKN2004FN TH10 is an indexable insert for milling applications, optimised for non‑ferrous materials and designed to fit Tungaloy milling systems where seat, geometry and cutter body match technically. Uncoated carbide for low cutting forces 15° relief angle for smooth engagement Round 20 mm form for versatile use 4.76 mm plate thickness for stable clamping Reduced cutting forces and cleaner surfaces for non‑ferrous work The insert provides consistently low cutting forces thanks to the uncoated carbide grade TH10, which is formulated as a sharp universal grade for non‑ferrous materials. Lower forces translate into less vibration and reduced tool load, enabling higher feed rates or smoother surface finishes on softer alloys. The geometry supports clean chip formation in applications where an uncoated cutting edge is preferred, resulting in predictable results across batch runs. Such behaviour reduces rework and contributes directly to improved process efficiency on the shop floor. Reliable fit and secure clamping within Tungaloy systems This insert is manufactured to complement Tungaloy milling bodies and requires matching seat and geometry for correct function; the system comprises the cutter body, indexable insert, clamping screw and, where applicable, backing shim. The 15° relief angle and 4.76 mm thickness ensure a secure clamp and repeatable positioning, which supports dimensional stability during contour and face milling. Correct system compatibility reduces setup time and minimises the risk of incorrect assembly, helping maintain cycle-time consistency in productive manufacturing environments. Practical range of applications and workshop advantages With a round 20 mm form and no central hole, the component is suitable for planing, shoulder, slot, high‑feed and contour milling depending on the allocated tool family. The uncoated carbide chemistry favours operations where clean surfaces and low entry cutting forces are essential, such as machining aluminium alloys and other non‑ferrous materials. Using this insert as part of a matched Tungaloy milling system streamlines part qualification and inventory management, while the universal nature of the grade allows reduced tool diversity for common tasks. For technical availability, compatibility checks or to request delivery details for the RDKN2004FN TH10 insert, contact Metav Werkzeuge—info@metav-werkzeuge.com or +49 2822 7131930—for prompt consultation and order support Technical data Article number: 6805879 Manufacturer SKU: TUN6805879 Model designation: RDKN2004FN Brand: Tungaloy Facts Plate diameter: 20 mm Plate thickness: 4.76 mm Relief angle: 15° Nominal angle: 0° Special features Material: carbide Grade/coating: TH10 (uncoated) Shape: round Hole: without hole Chipbreaker: without Application: milling Model series: milling indexable inserts FAQ What materials is this insert intended for? The RDKN2004FN TH10 insert is intended primarily for non‑ferrous materials; the TH10 uncoated carbide supports low cutting forces and clean surfaces in aluminium and similar alloys. Is the insert compatible with non‑Tungaloy cutter bodies? Compatibility requires matching the seat and geometry; the insert is produced for Tungaloy milling systems, and the seat, geometry and cutter body must align technically for safe use. What are the key dimensional specifications of the insert? The insert has a plate diameter of 20 mm, a thickness of 4.76 mm and a relief angle of 15°, as listed for the RDKN2004FN TH10. Does this insert include a chipbreaker or central hole? The RDKN2004FN TH10 is supplied without a chipbreaker and without a central hole. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDKN 2004TN AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide, a wear- and fracture-resistant grade, and compact geometry for consistent milling performance and predictable tool life; order directly via Metav Werkzeuge or consult our specialists for application matching. RDKN 2004TN AH120 indexable insert for milling by Tungaloy — PVD-coated carbide, round 20 mm The RDKN2004TN AH120 is a round indexable insert designed for Tungaloy milling systems, suitable for face, shoulder, slot, high-feed and contour milling when paired with matching cutters PVD-coated carbide for extended tool life Sharp cutting edge for reliable process security Round 20 mm insert, 4.76 mm thickness 15° clearance angle, without hole High-performance coating and substrate for steady production The combination of PVD coating and a carbide substrate delivers a balanced resistance to wear and thermal loading, ensuring stable cutting over longer intervals. The applied coating reduces adhesion of built-up edge and improves surface quality on workpieces, which translates directly into fewer component reworks and more predictable cycle times. This technical pairing is particularly effective when high cutting speeds are required or when the process demands a consistently sharp edge and process security. Geometry engineered for rigidity and repeatable results The insert’s round form with a 20 mm diameter and 4.76 mm thickness offers a compact contact area that supports robust clamping and vibration damping during milling. The 15° clearance angle provides effective shear formation while protecting the cutting edge from premature chipping. These geometric factors combine to increase tool life and maintain reproducible dimensional accuracy across serial production, reducing scrap and improving first-pass yield. Versatility across common milling operations Designed for multiple milling tasks, this indexable plate performs well in face milling, shoulder operations, slotting and higher-feed strategies when used within the appropriate Tungaloy cutter family. The grade AH120 is specified as a wear- and fracture-resistant option, making the insert a dependable choice where a sharp cutting edge and secure process behaviour are both required. Selecting this grade helps broaden the material range that can be machined effectively without frequent tool changes. Practical benefits: uptime, tool management and process safety Using a high-stability insert reduces unplanned stoppages and simplifies tool management. The consistent wear characteristics of the grade enable better prediction of tool-change intervals and easier integration into maintenance schedules. Fewer edge failures mean less intervention on the shop floor and improved operator confidence in daily production. Combined with appropriate cutter bodies and correct seating, the insert contributes to a measurable increase in productivity and lower manufacturing overhead. Contact Metav Werkzeuge for product availability, technical advice and to match this insert to the correct Tungaloy milling body — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6805880 Manufacturer SKU: TUN6805880 SKU: 6805880-Tungaloy Model series: Milling indexable inserts Measurements & geometry Insert designation: 2004TN Size / diameter: 20 mm Thickness: 4.76 mm Clearance angle: 15° Angle: 0° Materials & special features Material: carbide Coating: PVD Grade: AH120 Shape: round Hole: without hole Chipbreaker: none Application: milling (face, shoulder, slot, high-feed, contour) Usage note: insert requires matching Tungaloy cutter body and clamping screw FAQ Is this insert compatible with standard Tungaloy milling bodies? Yes. The RDKN2004TN AH120 insert is intended for use in Tungaloy milling systems; ensure the cutter body, seat geometry and clamping screw correspond to the insert designation and size. Which materials can be machined with this grade? The AH120 grade on the RDKN2004TN is optimised for wear and fracture resistance and suits a broad range of materials commonly encountered in milling operations when used with appropriate cutting parameters. Does the insert have a chipbreaker? No, this particular insert is supplied without a chipbreaker; its round geometry and edge preparation are intended for stable chip formation in the specified milling strategies. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6805880 and the manufacturer SKU is TUN6805880; both identifiers relate to the RDKN2004TN AH120 indexable insert by Tungaloy. How does the 15° clearance angle affect cutting performance? A 15° clearance angle balances shear formation and edge protection, supporting a sharp cutting action while reducing the risk of edge chipping under moderate to demanding milling loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RDKN 2004TN UX30 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp UX30 cutting edge, uncoated carbide body and a compact round Ø20 mm, 4.76 mm thickness to reduce cutting forces and improve chip formation in milling operations. Order or request advice via Metav Werkzeuge for reliable supply and system compatibility. RDKN2004TN UX30 RDKN indexable insert for milling — Tungaloy The RDKN2004TN UX30 is an indexable milling insert designed for versatile face, shoulder, slot, high‑feed and contour milling, offering a sharp cutting edge and consistent chip control. Sharp cutting edge for low cutting forces Uncoated carbide substrate for predictable wear 15° free angle reduces cutting resistance Round insert Ø20 mm, thickness 4.76 mm Increased productivity through lower cutting forces The combination of the UX30 grade and a deliberately sharp cutting geometry is engineered to reduce cutting resistance and improve feed efficiency. Lower cutting forces allow higher material removal rates without increasing spindle load, which supports faster cycle times and reduced tool change frequency. This results in a more predictable process and contributes directly to improved production throughput and part-to-part consistency. Predictable tool life and consistent chip formation Made from uncoated carbide, the insert provides stable wear characteristics that simplify tool life planning and reconditioning cycles. The round form and precise geometry promote uniform chip formation, lowering the likelihood of clogging or erratic cutting conditions. In practice, this means fewer interruptions for tool checks and a steadier surface finish on workpieces where controlled chip flow is critical. Compatibility and assembly for reliable operation The insert is intended for use in Tungaloy milling systems where plate seat, geometry and milling body must technically match. Correct pairing with the designated cutter body and clamping screw is essential for clamping security and repeatable positioning. The design includes a 15° free angle to assist cutting entry and reduce rubbing, and the absence of a hole and chipbreaker reflects its suitability for specific system families within Tungaloy’s range. Applications and handling in mixed production environments This indexable insert is suitable for a broad range of milling tasks — face milling, shoulder milling, slotting, high‑feed and contouring — depending on the selected tool family. The compact Ø20 mm diameter and 4.76 mm thickness make it a good option where space or cutter diameter is constrained, while the UX30 grade excels where low cutting forces and reliable chip control are priorities. For efficient integration, ensure correct torques and seating during replacement to maintain process stability. For tailored advice on the Tungaloy RDKN2004TN UX30 and to confirm cutter body compatibility, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert guidance and swift supply. Technical data Article number: 6805881 Manufacturer SKU: TUN6805881 SKU: 6805881-Tungaloy Designation: RDKN2004TN UX30 Model series: milling indexable inserts Facts ISO designation: 2004TN Insert diameter: Ø20 mm Thickness: 4.76 mm Free angle: 15° Hole: without hole Special features Material: carbide Coating: uncoated Chipbreaker: none Shape: round Application: milling Typical operations: face, shoulder, slot, high‑feed, contour milling System note: plate seat and geometry must match milling body FAQ What materials is this insert intended for? The RDKN2004TN UX30 is intended for general milling tasks where a sharp cutting edge and low cutting forces are required; suitability for specific workpiece materials depends on the chosen machining parameters and the broader tool family. Is the insert coated? The RDKN2004TN UX30 is supplied as uncoated carbide, which offers predictable wear behaviour and clear indications of flank wear for easier process control. Which milling operations are recommended for this insert? Typical uses include face milling, shoulder milling, slotting, high‑feed and contour milling when used in compatible Tungaloy milling systems. How important is the tool body match for this insert? Correct matching of the plate seat, insert geometry and milling body is essential for secure clamping and repeatable performance; the RDKN2004TN must be used in the appropriate Tungaloy cutter family. What is the ISO designation and key dimensions? ISO designation is 2004TN; the insert measures Ø20 mm with a 4.76 mm thickness and a 15° free angle. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com