RFEN 2004ZF AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide wear resistance and a 25° relief angle for process-secure milling; the round 20 mm, 4.76 mm design provides stable engagement and straightforward tool handling. Order the RFEN2004ZF AH120 insert directly via Metav Werkzeuge or ask our consultants if needed. RFEN2004ZF 2004ZF AH120 RFEN indexable insert for milling — Tungaloy A RFEN2004ZF AH120 indexable insert for Tungaloy milling systems, designed for face, shoulder, groove, high-feed and contour milling where a sharp cutting edge and process security are required. PVD-coated carbide for durable cutting edges 25° relief angle for stable engagement Round insert, 20 mm diameter, 4.76 mm thick AH120 grade: wear- and breakage-resistant Consistent machining results through robust grade and coating The combination of a PVD-coated surface and a wear-resistant AH120 carbide grade delivers consistent performance in a variety of milling tasks. PVD coating reduces friction at the cutting zone, which helps to extend tool life and maintain a sharp cutting edge under high mechanical stress. For production environments that prioritise repeatability and minimal downtime, this insert supports stable chip formation and predictable tool change intervals, contributing to improved process reliability and lower overall machining costs. Practical tool geometry for versatile milling operations The round form and specified dimensions—20 mm diameter with 4.76 mm thickness and a 25° relief angle—enable flexible engagement across multiple cutting directions and give mechanical robustness where axial and radial forces vary. The absence of a central hole requires a compatible insert seat and clamp arrangement; therefore, correct matching of insert seat, geometry and cutter body is essential. When assembled into the appropriate cutter body, the insert provides solid seating and repeatable positioning, reducing setup variability and supporting higher productivity in batch production. Why the material choice matters for demanding cuts Carbide substrates offer the hardness and toughness necessary for modern milling, while the AH120 formulation specifically targets resistance to wear and chipping during interrupted cuts and mixed-material jobs. In engineering terms, the grade balances hardness with fracture toughness so that the cutting edge remains sharp without premature breakouts. The PVD layer further protects the substrate and improves surface finish on the workpiece by lowering built-up edge tendencies. This combination is particularly advantageous for operations that require both a sharp edge and process security. Integration advice for manufacturing workflows This insert is intended for use in Tungaloy milling systems; the system build typically comprises the cutter body, the indexable insert, and the clamp screw, and all components must be technically compatible. For replacement and inventory planning, refer to the manufacturer article number and SKU to ensure correct procurement. When selecting cutting parameters, proceed with conservative feeds and speeds for initial trials and adjust based on observed tool wear and surface finish. If machining different materials, verify the AH120 suitability for the target workpiece to maintain the expected tool life and component quality. Contact Metav Werkzeuge for technical matching and procurement of Tungaloy RFEN2004ZF AH120 indexable inserts; expert guidance on cutter compatibility and process parameters is available by email or phone through Metav Werkzeuge. Technical Data Article number: 6805889 Manufacturer SKU: TUN6805889 SKU: 6805889-Tungaloy Model series: Fräswendeschneidplatten Facts Diameter: 20 mm Thickness: 4.76 mm Relief angle: 25° Angle: 0° Special features Material: carbide Coating: PVD-coated Grade: AH120 Shape: round insert Hole: without hole Applications: face, shoulder, groove, high-feed and contour milling System compatibility: Tungaloy milling systems — insert seat and cutter geometry must match FAQ What materials is this insert suited for? The AH120 grade and PVD-coated carbide construction of the RFEN2004ZF AH120 are intended for a broad range of milling tasks; suitability for a specific workpiece should be confirmed against material and cutting conditions. How is the insert fixed in the cutter body? This round insert has no central hole and requires the matching insert seat and clamp screw arrangement in a compatible Tungaloy milling body for secure fixation and repeatable positioning. Can this insert be used for high-feed milling? Yes, the insert is listed for high-feed milling among other typical applications and the combination of grade and geometry supports stable performance under such conditions. What does AH120 indicate? AH120 denotes the carbide grade and coating combination designed for wear resistance and breakage protection during milling where a sharp, process-secure cutting edge is required. Which data should be quoted when ordering replacements? Provide the manufacturer article number 6805889 or the manufacturer SKU TUN6805889 together with the product designation to ensure correct replacement of the RFEN2004ZF AH120 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RFEN 2004ZF GH330 Wendeplatten - Tungaloy
Taking advantage of the GH330 grade and the precise seating geometry of Tungaloy milling systems ensures robust edge stability and consistent wear resistance in high-volume milling operations; order the RFEN2004ZF GH330 indexable insert directly via Metav Werkzeuge or contact the technical consultants for matching advice. RFEN 2004ZF GH330 RFEN Indexable Insert for Milling by Tungaloy — round 20 mm, 4.76 mm thick, no-hole design RFEN2004ZF GH330 Tungaloy indexable insert for productive milling applications, designed for use in compatible Tungaloy cutter bodies and suited to face, shoulder, slot, high-feed and contour milling operations. Optimised for Tungaloy milling systems GH330 grade: wear-resistant and tough Round 20 mm form with 4.76 mm thickness 25° relief angle for stable cutting Reliable milling performance through matched system design The insert is part of a complete system consisting of the cutter body, the indexable insert and clamping screw, where correct seating and geometry alignment are essential for repeatable performance. The RFEN series is engineered so that the insert seat and geometry match Tungaloy milling bodies, reducing the risk of instability at the cutting edge. For production environments this means fewer interruptions, more predictable tool life and a consistent surface finish, which together feed directly into reduced setup times and improved process reliability. Material grade and what it means in practice Manufactured from cemented carbide, the GH330 grade balances wear resistance and toughness, making it suitable for a wide range of milling tasks. The GH330 composition complements the cutting geometry to provide stable chip formation and good resistance to edge chipping. For operators not specialised in materials science: wear resistance increases time between index changes, while toughness helps avoid sudden edge failure when interrupted cuts or variable material compositions occur. The net effect is a more productive cutting cycle and lower tooling consumption per workpiece. Geometry and handling benefits on the shop floor The insert’s round 20 mm form and 4.76 mm thickness deliver secure clamping and even load distribution across the edge, particularly in contour and shoulder milling. The 25° relief angle ensures a consistent cutting engagement and helps control cutting forces during high-feed passes. The absence of a hole simplifies the contact surface and suits specific clamp designs; correct matching of the seat is mandatory for safe use. Where higher removal rates are required, this combination supports stable cutting and predictable tool-change intervals. Process advantages and recommended applications Designed for face, shoulder, slot, high-feed and contour milling depending on the tool family, this insert provides versatility across common milling operations. The system-oriented approach favours manufacturers seeking reproducible results and reduced process variability. When matched with the appropriate Tungaloy cutter body, the insert offers reliable surface quality and stable tool life, which contributes to improved throughput and lower rework rates in serial production. Contact Metav Werkzeuge for availability and precise tool-body matching of this Tungaloy RFEN2004ZF GH330 indexable insert; Metav Werkzeuge provides technical consultation and rapid delivery options. Technical data Article number: 6805890 Manufacturer SKU: TUN6805890 Supplier SKU: 6805890-Tungaloy Core measurements Insert format: RFEN2004ZF Shape: round Diameter: 20 mm Thickness: 4.76 mm Relief angle: 25° Hole: without hole Materials & features Material: cemented carbide Grade: GH330 Intended application: milling Series: milling indexable inserts Chipbreaker: without FAQ What milling operations suit this insert best? This indexable insert is intended for face, shoulder, slot, high-feed and contour milling when used in the designated Tungaloy cutter families. How does the GH330 grade affect tool life? The GH330 grade provides a compromise of wear resistance and toughness, extending usable life under mixed cutting conditions while maintaining edge stability. Is a specific cutter body required? Yes, the insert requires a Tungaloy-compatible cutter body with a matching seat and geometry to ensure correct clamping and safe operation. What are the key dimensions to verify before fitting? Check the round form with 20 mm diameter, 4.76 mm thickness and the 25° relief angle to confirm compatibility with the clamping system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930
RFEN 2004ZF KS20 Wendeplatten - Tungaloy
Take advantage of the combination of stable cutting-edge performance, optimised wear resistance and straightforward system compatibility to keep milling processes productive and predictable. Order original Tungaloy inserts through Metav Werkzeuge or consult the technical team for application guidance. RFEN 2004ZF KS20 – indexable insert for milling (Tungaloy) RFEN2004ZF KS20 is an indexable insert designed for use within Tungaloy milling systems; intended for face, shoulder, slot, high-feed and contour milling depending on the assigned cutter body. Carbide grade KS20 for milling stability 25° relief angle for controlled cutting Round insert, 20 mm diameter 4.76 mm thickness, no hole Consistent results for high-productivity milling The carbide composition and geometry deliver a balance of wear resistance and edge stability that supports continuous production. With the KS20 grade matched to the insert geometry, the tool life becomes more predictable and tool-changing intervals lengthen, which reduces machine downtime. This attribute is particularly valuable for repetitive tasks such as face and shoulder milling where consistent dimensional results and surface finish matter. The design emphasises repeatable performance over many indexings, helping to maintain cycle-time targets and stable process output. Extended service life through an optimised grade The KS20 cutting grade is selected to provide a compromise between hardness and toughness: enhanced wear resistance combined with sufficient fracture resistance for interrupted cuts or mixed materials. This leads to fewer edge failures and improved overall economy per cutting edge. The resulting lower frequency of insert changes supports a more economical production rhythm and contributes to predictable consumable consumption in the tool inventory. Where surface integrity and repeatability are priorities, the grade’s performance characteristics deliver measurable gains. Secure clamping and predictable chip behaviour Designed as a system component, the insert matches Tungaloy cutter pockets and fastening methods so that seat fit, geometry and clamping achieve the intended cutting kinematics. The round shape and specified relief angle of 25° provide stable contact and controlled engagement, reducing vibration and improving surface consistency on workpieces. The version supplied here has no central hole and no integral chipbreaker, which is appropriate where the cutter body provides chip control; this simplifies matching the insert to the correct holder and avoids unexpected fitment issues. Clear selection and straightforward integration Technical specifications such as 4.76 mm thickness, 20 mm size and the ISO designation support rapid selection during tool planning. The insert is intended for mounting in the designated Tungaloy milling bodies; correct pairing ensures intended cutting forces and heat distribution. For operations spanning planing, slotting or contouring, this insert offers a reliable option that integrates into existing milling families. Technical staff will appreciate the concise specification for process planning and spare-part stocking. Contact Metav Werkzeuge for stock availability and expert advice on integrating Tungaloy RFEN2004ZF KS20 inserts into the production setup Technical data Article number: 6805891 Manufacturer SKU: TUN6805891 SKU: 6805891-Tungaloy Model series: Milling indexable inserts Material: Carbide Application: Milling Facts Insert size: 20 mm Thickness: 4.76 mm Relief angle: 25° ISO designation: 2004ZF Angle: 0° Manufacturer article number: 6805891 Special features Grade: KS20 Shape: round Hole: none Chipbreaker: without Compatible with Tungaloy milling systems Intended uses: face, shoulder, slot, high-feed and contour milling based on cutter family FAQ What materials is this insert intended to machine? The RFEN2004ZF KS20 insert is designed for general milling applications; the KS20 grade offers a balance suitable for a broad range of steels and mixed materials as specified for Tungaloy milling grades. How is the insert mounted in the milling cutter? This round insert is intended to be clamped in compatible Tungaloy milling bodies; seat geometry and clamping must match the insert shape and ISO designation for secure fit and correct cutting alignment. Does the insert include a chipbreaker or central hole? The RFEN2004ZF KS20 is supplied without a hole and without an integrated chipbreaker; chip control is achieved via the cutter body or the selected tool family. Which ISO designation corresponds to this insert? The ISO code for this indexable insert is 2004ZF, which should be used when verifying compatible cutter bodies and ordering matching inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RFEN 2004ZF UX30 Wendeplatten - Tungaloy
Combining the uncoated carbide UX30 grade with a sharp cutting edge and a 25° clearance angle, this insert provides low cutting forces and reliable chip formation for productive milling. Order genuine Tungaloy inserts through Metav Werkzeuge or consult our technical team for application-specific advice. RFEN2004ZF UX30 Tungaloy milling insert — uncoated carbide, 25° clearance The RFEN2004ZF UX30 is a round indexable insert for Tungaloy milling systems, optimised for face, shoulder and contour milling where low forces and consistent chips are required. Round insert for versatile milling Uncoated carbide with sharp cutting edge 25° clearance angle for low cutting forces Compatible with Tungaloy milling systems Lower spindle load and higher process efficiency The combination of uncoated carbide in grade UX30 and a sharp cutting edge reduces cutting resistance and results in lower cutting forces, which in turn lessens spindle and machine load. For production environments this translates into the possibility of higher feed rates or reduced cycle times without compromising component accuracy. The insert’s geometry focuses on stable metal removal rather than aggressive finishing, making it a pragmatic choice for economical, repeatable milling operations. Broad applicability across common milling tasks As a round insert, the component is suited to a range of operations including face, shoulder, slot, high‑feed and contour milling, depending on the assigned tool family. The shape delivers consistent entry and exit behaviour, improving surface regularity on interrupted cuts. Since the insert is part of a system, insert seat geometry and milling body compatibility are critical: only use this insert in bodies engineered for the same seat and locking arrangement to ensure secure clamping and repeatable results. Predictable chip behaviour and reliable performance The UX30 grade is selected for good chip formation where low cutting forces are a priority. Because this insert is without a chipbreaker, chip flow is governed primarily by cutting conditions and workpiece material; this can be advantageous in applications that favour continuous, controllable chips. The uncoated carbide substrate provides a sharp initial cutting edge that supports stable machining and straightforward regrinding options where applicable. Simple integration and clear dimensional data The insert’s 20 mm diameter and 4.76 mm thickness, together with its round form and absence of a central hole, make it straightforward to index and position in compatible milling bodies. These dimensions allow planning for clamping height and projection in the fixture design phase. For traceability and procurement, the item is listed under the manufacturer’s references and can be matched to the correct milling body family to avoid mismatches in seat geometry. For application guidance and to secure genuine Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our advisers will support selection and ensure correct system compatibility. Technical data Article number: 6805893 Manufacturer SKU: TUN6805893 SKU: 6805893-Tungaloy Model series: Milling indexable inserts Type designation: RFEN2004ZF UX30 Material: carbide (uncoated) Manufacturer: Tungaloy Description: Round indexable insert for Tungaloy milling systems Facts Diameter: 20 mm Thickness: 4.76 mm Clearance angle: 25° ISO designation: 2004ZF Hole: none Chipbreaker: none Angle: 0° Special features Round insert geometry Uncoated carbide grade UX30 Sharp cutting edge for low cutting forces Compatible with Tungaloy milling systems Typical applications: face, shoulder, slot, high‑feed and contour milling System components: milling body, insert, clamping screw, optional shim FAQ Which milling operations are suitable for this insert? This insert is designed for a wide range of milling tasks — face, shoulder, slotting, high‑feed and contour milling — when used in the appropriate Tungaloy tool family. Can the insert be used in non‑Tungaloy milling bodies? The insert will only perform reliably when the insert seat, geometry and clamping arrangement match; verify mechanical compatibility before fitting to a non‑Tungaloy body. What material is the insert made from? The RFEN2004ZF UX30 is manufactured from uncoated carbide (hard metal) in grade UX30, selected for sharp edges and good chip formation. How does the absence of a chipbreaker influence performance? Without a chipbreaker, chip behaviour depends on cutting conditions and workpiece material; this can provide an advantage where continuous, controllable chips are required or where external chip control is applied. What are the key dimensions and designation for procurement? Key data: diameter 20 mm, thickness 4.76 mm, clearance angle 25°, ISO 2004ZF; manufacturer reference 6805893 and SKU TUN6805893. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNGA 120400 LX10 Wendeplatten - Tungaloy
Take advantage of a combination of high-feed performance, wear-resistant LX10 grade and a compact round design for consistently productive roughing cycles; order directly via Metav Werkzeuge or ask the consultants for application advice. RNGA120400 LX10 round indexable insert for turning — Tungaloy The RNGA120400 LX10 is a round indexable insert designed for high-feed turning and productive roughing under stable clamping conditions. TurnTenFeed series for high feeds Tungaloy LX10 grade for wear resistance Round 12 mm insert with cylindrical hole Designed for productive roughing Boost throughput with a high-feed, roughing-focused design The RNGA120400 is engineered for high-feed turning, where material removal rate and stable chip control determine cycle time. The round geometry and the TurnTenFeed system focus cutting forces into a predictable contact area, which reduces vibration and supports higher feed per revolution. As a result, shops benefit from shorter cycle times and a more consistent surface for follow-up operations. The combination of form and system architecture prioritises continuous production and measurable increases in output. Long tool life from a balanced carbide grade The LX10 grade from Tungaloy blends wear resistance with toughness to sustain edge stability during heavy cuts. This balance is essential in roughing operations, where intermittent contact and edge loading occur frequently. The carbide substrate provides a durable foundation while the LX10 composition maintains a controlled flank wear progression, reducing the need for frequent index changes. The outcome is predictable tool life and reduced tool handling overhead in the production cell. Secure clamping and compact geometry for reliable performance A round insert with a 12 mm diameter and cylindrical hole offers simple, repeatable location in the seat, promoting rapid indexing and minimising setup variation. The 0° clearance (relief) in this geometry supports stable edge engagement when used in robust holders, enabling deeper engagement and heavier feeds without compromising seating integrity. This configuration suits fixtures and chucks that provide a rigid interface, translating into steady cutting conditions and consistent part quality. System-level benefits and recommended application scope As part of the TurnTenFeed model series, the insert is intended for productive schruppbearbeitung (productive roughing) in turning applications where stability and high feed rates are priorities. Supplied as part of a system that includes holders, indexable inserts and spare parts, this carbide component simplifies inventory and tool planning. For best results, integrate the insert into a stable clamping setup and select cutting parameters aligned with high-feed strategies to unlock the full productivity potential. For specialist guidance on deploying Tungaloy turning solutions and to check availability of RNGA120400 (SKU TUN6852090), contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6852090 Manufacturer SKU: TUN6852090 Label: RNGA120400 LX10 Tungaloy indexable insert Model series: TurnTenFeed Material: Carbide Facts Insert size: 12 mm Plate thickness: 4.76 mm Relief angle: 0° Hole style: cylindrical hole Special features Grade: LX10 (Tungaloy) Insert shape: round Chipbreaker: without Application: Turning System focus: high-feed roughing FAQ What applications is this insert best suited for? The RNGA120400 LX10 is intended for high-feed turning and productive roughing operations where stable clamping and high material removal rates are required. Which material is the insert made from? This insert is manufactured from carbide with the Tungaloy LX10 grade, providing a balance of wear resistance and toughness. How is the insert located and secured in the holder? The round insert features a cylindrical hole for repeatable seating; combined with the appropriate TurnTenFeed holder, it ensures secure clamping and easy indexing. Does the RNGA120400 include a chipbreaker? The specification indicates the insert is supplied without a chipbreaker, optimising it for robust cutting strategies and simple chip flow in high-feed roughing. Can this insert be used across different turning systems? The RNGA120400 is part of the TurnTenFeed family and is designed to work with compatible holders in that system; compatibility should be verified against the holder design and clamping method. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNGA 120400 LX11 Wendeplatten - Tungaloy
Take advantage of high-feed capability and LX11 wear resistance for faster, more consistent roughing cycles; the round 12 mm form with a cylindrical hole ensures reliable clamping in standard holders. Order the RNGA120400 LX11 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. RNGA 120400 LX11 – Tungaloy turning insert for high-feed roughing The RNGA120400 LX11 Tungaloy insert is a round indexable insert designed for high-feed, productive rough turning under stable clamping conditions. TurnTenFeed series for high-feed turning LX11 grade for wear and edge stability Round 12 mm insert with cylindrical hole 0° relief angle for stable roughing Faster material removal with consistent process stability The TurnTenFeed family is tailored for high-feed turning, delivering measurable gains in cycle time where stable clamping is available. The combination of a dedicated tool series and a grade optimised for roughing means the insert supports higher feed rates without compromising dimensional repeatability. Using a round geometry with a central fixing provides straightforward indexing and balanced load distribution, which helps maintain cutting-edge integrity during heavy depth-of-cut operations. This leads to improved throughput while keeping rework and downtime to a minimum. Long life and edge reliability from the LX11 grade The LX11 grade from Tungaloy is formulated to balance wear resistance, toughness and cutting-edge stability. For roughing applications this translates into a longer effective cutting life and fewer insert changes, reducing non-productive time. The carbide substrate combined with the grade's properties preserves the edge under intermittent or heavy contact and supports predictable wear behaviour. For users unfamiliar with cutting grades: wear resistance slows flank and crater wear, while toughness prevents premature chipping—both essential for repeatable performance in demanding turning tasks. Clear mounting and geometry for predictable clamping With a round 12 mm dimension, 4.76 mm thickness and a cylindrical hole, the insert enables secure seating in compatible holders and is part of a modular system of holders, indexable inserts and spare parts. The specification of a 0° relief angle suits stable roughing set-ups where tool support and workholding are rigid. The insert is supplied without a chipbreaker, which should be considered when planning chip control strategies for specific materials or long unsupported lengths. The simple geometry facilitates quick indexing and predictable engagement with the workpiece. Practical advantages for workshop implementation Integration into existing turning cells is straightforward when replacing conventional roughing inserts with this RNGA geometry: lower cycle times from higher feed rates, longer intervals between insert changes, and stable part quality under repeat runs. The insert is intended for turning operations and complements holders engineered for the TurnTenFeed series, allowing procurement and tooling planning around a coherent system rather than single-use components. For production planning, the combination of series design and grade selection contributes directly to process reliability and output consistency. Discuss application-specific selection with Metav Werkzeuge for best results using the RNGA120400 LX11 Tungaloy insert; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to align tooling, holder choice and cutting data. Technical data Article number: 6805894 Manufacturer SKU: TUN6805894 SKU: 6805894-Tungaloy Model series: TurnTenFeed Manufacturer: Tungaloy Facts Insert size: 12 mm Thickness: 4.76 mm Relief angle: 0° ISO designation: 120400 Special features Round insert geometry Cylindrical hole for mounting Grade: LX11 (Tungaloy) Material: carbide Chipbreaker: none System: holder, indexable inserts and spare parts Application: turning, high-feed and productive roughing under stable clamping FAQ What machining tasks is this insert intended for? The RNGA120400 LX11 insert is intended for turning, specifically high-feed and productive roughing under stable clamping conditions; it is part of the TurnTenFeed family. What are the key dimensional features for clamping and holder selection? The insert is round with a 12 mm diameter, 4.76 mm thickness and a cylindrical hole for fixing; these dimensions support straightforward mounting in compatible holders. Does the insert include a chipbreaker? No, this RNGA120400 LX11 insert is supplied without a chipbreaker, so chip control should be planned according to the workpiece material and machining strategy. Which grade and substrate are used for wear resistance and toughness? The cutting grade is LX11 from Tungaloy on a carbide substrate, selected to balance wear resistance, toughness and cutting-edge stability for roughing operations. How does the 0° relief angle affect cutting performance? A 0° relief angle provides a stable contact profile for heavy depth-of-cut operations when the tool and workpiece are rigidly supported, aiding predictable edge loading and consistent roughing performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNGN 120400 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of durable FX105 grade, cemented carbide construction and ISO compatibility to keep turning processes stable and predictable; order the insert directly via Metav Werkzeuge or consult their specialists for holder matching and stock availability. RNGN120400 FX105 — ISO turning insert for turning by Tungaloy RNGN120400 FX105 is an ISO-standard turning insert designed for external and internal turning applications, providing a balanced combination of wear resistance and cutting-edge stability. ISO turning insert RNGN120400 FX105 grade for wear resistance 0° clearance angle for stable cutting 12 mm round insert, 4.76 mm thick Consistent productivity through a balanced carbide grade The RNGN120400 indexable insert combines a purposely engineered FX105 grade with cemented carbide to deliver predictable tool life in a variety of turning tasks. The core benefit is steady performance under changing load: the grade emphasises wear resistance while retaining sufficient toughness to avoid premature chipping. This balance reduces unplanned tool changes and supports higher net productivity, making the insert suited to operations where tool life consistency and surface quality are priorities. Predictable set-up thanks to clear compatibility rules Compatibility with a toolholder depends on geometric and dimensional criteria: form, clearance angle, tolerance class, fastening, size and thickness. The insert is supplied without a chipbreaker and without a hole, so the choice of holder and any chip-control measure must be matched to the cutting task and workpiece material. Following these selection rules ensures secure clamping and stable cutting conditions, which in turn deliver repeatable results and reduce the need for trial-and-error during tool changeover. Faster changeovers and system-level reliability As an ISO turning insert, the item forms part of a system that includes a matching external holder or boring bar, a shim/clamp set and replacement screws. Using standardised inserts simplifies stock management and shortens changeover time: compatible holders accept the same geometry, while spare clamping kits and screws allow immediate replacement without bespoke parts. The result is less downtime and a smoother production flow when indexable inserts are used as part of a planned tool system. What the FX105 grade adds in practical terms The Tungaloy FX105 grade complements the chosen geometry by focusing on a middle ground between high wear resistance, edge toughness and cutting-edge stability. In practice this means fewer edge failures and a steadier surface finish over an extended number of cuts. For shops seeking an insert that does not demand overly specialised feeds or speeds, the grade offers a pragmatic compromise that supports robust, repeatable machining and reliable part quality. For availability of the Tungaloy RNGN120400 FX105 and tailored advice on compatible holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate support Technical data Article number: 6805895 SKU: 6805895-Tungaloy Manufacturer SKU: TUN6805895 Model series: ISO turning inserts Material: cemented carbide Grade: FX105 ISO designation: RNGN120400 Application: turning Facts Size: 12 mm Thickness: 4.76 mm Clearance angle: 0° Insert form: round Hole: without hole Chipbreaker: without Special features FX105 grade (Tungaloy carbide grade) ISO-standard indexable insert Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness System components: matching external holder or boring bar, shim/clamp set and replacement screws Designed for external and internal turning FAQ What operations is this insert intended for? The RNGN120400 FX105 is intended for turning operations, suitable for both external and internal turning when paired with an appropriate holder. Which geometry aspects determine holder compatibility? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the RNGN120400 must match the holder specifications. Is a chipbreaker included with the insert? No, the insert is supplied without a chipbreaker; chip control must be addressed via holder choice or secondary measures. What material is the insert made from? The insert is manufactured from cemented carbide, optimised with the Tungaloy FX105 grade for a balance of wear resistance and toughness. How thick is the insert and what is its diameter? The insert is 4.76 mm thick with a 12 mm round form, matching standard ISO dimensions for this designation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNGN 120400 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard geometry, Tungaloy LX10 cemented carbide, and exact sizing (12 mm × 4.76 mm) for dependable turning results; order the insert directly via Metav Werkzeuge or contact our consultants for selection and holder compatibility. RNGN 120400 LX10 Turning insert (RNGN120400) – Tungaloy RNGN120400 LX10 Tungaloy insert for ISO-compliant turning applications, designed as a round indexable insert for external and internal turning tasks. ISO-standard round turning insert Tungaloy LX10 carbide grade 12 mm diameter, 4.76 mm thickness No chipbreaker for custom cutting strategies Reliable edge life for continuous production The round indexable insert is made from cemented carbide in Tungaloy LX10 grade, a composition developed to balance wear resistance and edge stability. This produces a predictable tool life that supports steady production runs and reduces unscheduled tool changes. For process planners, the main advantage is fewer interruptions and more consistent part quality: the insert’s material properties help maintain cutting-edge geometry under varied cutting conditions, resulting in repeatable surface finish and dimensional stability. Consistent fit and straightforward tool matching The insert conforms to ISO-standard designation RNGN120400 and is supplied without a centre hole, which simplifies clamp selection in many round-insert systems. Compatibility with a toolholder depends on form, relief angle, tolerance class, fastening method, size and thickness; matching those parameters avoids runout and instability. The 0° relief angle specification and exact 4.76 mm thickness ensure that the indexable insert seats precisely in appropriately rated holders, offering reliable clamping and minimised vibration for improved cutting performance. Flexible performance across turning operations Supplied without a chipbreaker, this round insert gives process engineers the freedom to select chip control solutions that suit the workpiece material and machining strategy. Where heavy interrupted cuts or unstable set-ups occur, the LX10 grade supports edge robustness; for fine finishing, its stable cutting edge helps attain consistent surface quality. The system approach—insert, compatible toolholder, clamp set and correct fastening—allows the machining process to be optimised for volume, feed rates and coolant regimes without compromising part accuracy. Practical handling, identification and system integration The indexable insert is easy to store and identify: ISO coding and the manufacturer SKU (TUN6832837) simplify reordering and toolroom logistics. The round form (12 mm) is compact and suitable for constrained geometries, while being straightforward to replace during routine tool changes. Because the insert is part of an ISO-series system, spare parts such as clamping pads and screws are standardised; this reduces procurement complexity and helps maintain consistent inventory across multiple machines and shops. For application advice, availability checks or to request the TUN6832837 SKU, contact Metav Werkzeuge for tailored recommendations and holder compatibility support at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6832837 Manufacturer SKU: TUN6832837 Seller SKU: 6832837-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Product name: RNGN120400 LX10 Tungaloy insert Core data Diameter / size: 12 mm Thickness: 4.76 mm Relief angle: 0° ISO code: 120400 Features & applications Material: cemented carbide Grade: LX10 (Tungaloy) Shape: round indexable insert Hole style: without hole Chipbreaker: without chipbreaker Intended use: turning (external and internal) Compatibility note: holder match by form, relief angle, tolerance, fastening, size and thickness FAQ What turning tasks is this insert intended for? The RNGN120400 LX10 Tungaloy insert is intended for general external and internal turning where a round indexable insert suits the tool approach and workpiece geometry. How does the LX10 grade affect performance? The Tungaloy LX10 grade combines wear resistance and toughness to improve edge stability and extend usable life of the insert under varied turning conditions. Is a chipbreaker included with this insert? This RNGN120400 insert is supplied without a chipbreaker; chip control should be achieved via choice of cutting data or by selecting inserts with dedicated chipbreaking geometries where required. Which holders are compatible with this round insert? Compatibility depends on matching the round insert form, 0° relief angle, tolerance class, fastening method, size (12 mm) and thickness (4.76 mm) to the toolholder specification to ensure stable clamping. How can the insert be identified for reordering? Use the designation RNGN120400 LX10 and manufacturer SKU TUN6832837 to order the exact Tungaloy turning insert and to verify geometry against the toolholder specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNGN 120400 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, cemented carbide durability and precise holder compatibility for consistent turning performance; order the insert directly via Metav Werkzeuge or consult the team for application support. RNGN 120400 LX11 indexable turning insert for turning by Tungaloy — round 12 mm, 0° clearance angle RNGN120400 LX11 Tungaloy indexable turning insert is designed for external and internal turning applications where a balance of wear resistance and edge stability is required. ISO turning insert RNGN120400 LX11 Round 12 mm plate, thickness 4.76 mm Cemented carbide grade with edge stability 0° clearance angle, no chipbreaker option Consistent performance from a robust carbide grade The RNGN120400 LX11 insert brings process reliability through a cemented carbide substrate and a cutting-grade engineered by Tungaloy. The combination of wear resistance and toughness reduces unexpected tool changes and supports longer uninterrupted runs. This leads to fewer machine stoppages and more predictable cycle times, which is particularly valuable in batch production or multi-shift operations where repeatability matters. The round geometry facilitates versatile engagement for both external profiling and light internal work. Clear compatibility and straightforward clamping for efficient setup Designed as an ISO-compliant turning insert, compatibility with the toolholder is determined by form, clearance, tolerance class, fastening method, size and thickness. The round 12 mm plate with a 4.76 mm thickness and 0° clearance angle simplifies selection for holders specified for RNGN-types. The system build typically comprises the insert, a matching external holder or boring bar, shim/clamp set and replacement screws, enabling a rapid fitment process and reliable clamping force for stable machining. LX11 grade explained: balanced edge life and adaptability The LX11 grade from Tungaloy provides a middle ground between hard-wearing and tough performance characteristics, helping to maintain cutting-edge stability under variable cutting conditions. Absence of an integrated chipbreaker in this variant lets the grade focus on a plain-edge geometry suited to specific turning tasks; chip control can be managed by cutting parameters and holder geometry. Selection of this grade supports a broad range of turning tasks where consistency and repeatable tool life contribute to overall process efficiency. Contact Metav Werkzeuge for tailored application advice and prompt supply of Tungaloy inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6805896 Manufacturer SKU: TUN6805896 SKU: 6805896-Tungaloy Facts Insert designation (ISO): RNGN120400 Shape: round, 12 mm Thickness: 4.76 mm Clearance angle: 0° Hole: without hole Material: cemented carbide Special features Grade: LX11 (Tungaloy) No chipbreaker For external and internal turning ISO-compliant turning insert Compatible with matching holder, shim and clamp set FAQ What materials is this insert suitable for? The LX11 grade and cemented carbide construction make the insert suitable for a broad range of turning tasks; material-specific suitability should be confirmed based on the exact workpiece material and cutting conditions. How is compatibility with holders ensured? Compatibility is determined by the insert form, 0° clearance angle, tolerance and size; holders and shims specified for RNGN-type ISO inserts will accept the plate when dimensions match. Is there a chipbreaker on the plate? This variant is supplied without a chipbreaker, allowing chip control to be achieved via holder geometry and cutting parameters. What is the manufacturer article number and SKU? Manufacturer article number 6805896; Manufacturer SKU TUN6805896; SKU 6805896-Tungaloy Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNGN 120700 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of DoFeed high‑feed geometry and the Tungaloy LX10 carbide grade to increase material removal while maintaining edge stability; order the insert directly via Metav Werkzeuge or request tailored advice from our consultants. RNGN 120700 LX10 — RNGN120700-T1 milling insert (DoFeed) by Tungaloy The RNGN120700-T1 LX10 is a round carbide insert for high‑feed milling, engineered for large time‑volume removal at shallow axial depths in pocketing and face milling operations. High‑feed geometry for large material removal Tungaloy LX10 grade for wear resistance Round insert, 12 mm inscribed circle Chipbreaker T1 for controlled chip formation Faster material removal with DoFeed high‑feed geometry The DoFeed series is designed for productive high‑feed milling where substantial time‑volume removal is required at low axial depths. The DoFeed geometry enables efficient cutting by spreading cutting forces over the insert radius, so cycle times are reduced without raising axial engagement. This results in improved feed‑per‑tooth efficiency and consistent removal rates in pocketing and planing tasks. The benefit for production is a reliable increase in throughput while preserving machine stability and tool life. Durable cutting performance from the Tungaloy LX10 grade The Tungaloy LX10 grade combines wear resistance and toughness to provide a stable cutting edge under interrupted or heavy feed conditions. The carbide substrate offers intrinsic hardness, while the grade formulation supports edge integrity and controlled flank wear. The integrated chipbreaker T1 is tuned to the insert’s geometry, promoting predictable chip formation and reducing the risk of built‑up edge. Together, these features contribute to repeatable surface quality and lower tool change frequency. System compatibility and practical handling for workshop use The round insert design (inscribed circle 12 mm, thickness 7.94 mm) and the specification “without hole” indicate a clamping arrangement that fits dedicated DoFeed cutter bodies. The system comprises the milling body, matching inserts and fastening screws as standard components, which simplifies tool assembly and replacement. This modular approach reduces spindle downtime and makes tool management straightforward in series production, supporting efficient changeover and consistent process results. Choose Tungaloy DoFeed inserts for productive high‑feed milling and contact Metav Werkzeuge for application guidance or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6852139 SKU: 6852139-Tungaloy Manufacturer SKU: TUN6852139 Name: RNGN120700-T1 LX10 Tungaloy insert Facts Inscribed circle: 12 mm Thickness: 7.94 mm Relief angle / free angle: 0° ISO code: 120700 Special features Material: carbide Grade: Tungaloy LX10 Geometry: round Chipbreaker: T1 Hole: without hole Application: milling Model series: DoFeed System components: milling body, matching inserts and screws FAQ What applications is this insert intended for? The RNGN120700-T1 LX10 insert is intended for high‑feed milling tasks such as pocketing and face milling where large time‑volume removal is required at low axial depths. How does the LX10 grade affect performance? The Tungaloy LX10 grade provides a balance of wear resistance and toughness that preserves the cutting edge under heavy feed conditions, enhancing repeatability and surface integrity in milling operations. What role does the T1 chipbreaker play? The T1 chipbreaker promotes consistent chip formation adapted to the round geometry, improving chip evacuation and reducing the likelihood of built‑up edge during interrupted cuts. Which cutter bodies are compatible with this insert form? Round inserts with a 12 mm inscribed circle and no hole are typically mounted in DoFeed cutter bodies designed for the RNGN family; the system uses matching screws and bodies for secure clamping. Is the insert suitable for interrupted cutting or slotting applications? The combination of the DoFeed geometry and the LX10 grade gives good edge stability for operations with interrupted engagement, while chip control from the T1 breaker maintains process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
RNGN 120700 LX11 Wendeplatten - Tungaloy
Benefit from the DoFeed high-feed geometry and Tungaloy's LX11 carbide grade, delivering high material removal rates with stable edge life and reliable chip control; order directly via Metav Werkzeuge or consult our specialists for integration guidance. RNGN 120700 LX11 Tungaloy indexable insert for milling The RNGN120700-T1 LX11 indexable insert from Tungaloy is engineered for high-feed milling, pocketing and face machining, optimised for large chip volumes at small axial depths. DoFeed high-feed geometry for large chip volume Tungaloy LX11 grade for wear resistance and toughness Round 12 mm insert, 7.94 mm thickness T1 chipbreaker for pocketing and face milling Increased throughput with high-feed design The DoFeed high-feed concept focuses on achieving higher material removal rates while keeping axial engagement minimal, which reduces cycle time without increasing radial loads. The combination of the specialised geometry and the carbide substrate enables productive milling across pocket and face operations; large chip volumes are evacuated efficiently, lowering the frequency of interruptions. For process planners this translates into shorter machining cycles and improved utilisation of milling centres, particularly where deep axial cuts are impractical. Predictable tool life through LX11 balance Tungaloy's LX11 grade is formulated to combine wear resistance and toughness, improving edge stability during heavy intermittent or continuous cuts. The result is a more consistent flank wear progression and fewer unexpected edge failures. The RNGN120700-T1 insert offers stable cutting performance under high material removal conditions, which supports predictable tool-change intervals and easier process planning for production runs. Compact, robust geometry for system reliability Designed as a round, 12 mm insert with 7.94 mm thickness and a 0° relief angle, the insert delivers a sturdy cutting edge with uniform clamping contact. The T1 chipbreaker is tailored for pocketing and face milling, improving chip control and surface finish while reducing heat accumulation at the cutting zone. As part of the DoFeed system, the insert integrates with matching cutter bodies and fixing screws to provide a modular solution that simplifies inventory and minimises downtime due to quick, repeatable insert changes. For technical advice on integrating the Tungaloy RNGN120700-T1 into existing DoFeed cutter systems or to request procurement through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer: Tungaloy Manufacturer article number: 6805897 SKU: 6805897-Tungaloy Manufacturer SKU: TUN6805897 Model series: DoFeed Insert designation: RNGN120700-T1 Core dimensions Insert size: 12 mm Plate thickness: 7.94 mm Relief angle: 0° Plate form: round Hole: without hole Special features Grade: LX11 (Tungaloy) Material: carbide Chipbreaker: T1 System: milling body with matching inserts and screws Typical applications: high-feed milling, pocketing, face milling FAQ What operations is this insert designed for? The RNGN120700-T1 LX11 insert is intended for high-feed milling tasks such as pocketing and face machining, where large chip volumes are required at small axial depths. What benefits does the LX11 grade provide? The LX11 grade from Tungaloy offers a balance of wear resistance and toughness, improving edge stability and delivering predictable tool life under demanding milling conditions. How does the DoFeed geometry improve productivity? DoFeed geometry enables high material removal with low axial engagement, increasing throughput while reducing radial forces; this improves cycle times for pocketing and surfacing operations. What are the key dimensions and mounting features? The insert is round with a 12 mm diameter, 7.94 mm thickness, 0° relief angle and no central hole; it uses a T1 chipbreaker and is supplied as part of the DoFeed system (SKU: 6805897-Tungaloy). Is the insert compatible with standard DoFeed cutter bodies? The insert is part of the DoFeed family and is designed to be used with the corresponding milling bodies and fixing screws for repeatable clamping and reliable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNGN 120700 TS200 Wendeplatten - Tungaloy
Combining the TS200 cutting grade with a robust carbide construction, the RNGN120700-T1 delivers enhanced wear resistance and stable cutting-edge performance for high-feed milling; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. RNGN120700-T1 TS200 RNGN Milling Insert — DoFeed high-feed geometry by Tungaloy The RNGN120700-T1 TS200 is a round indexable milling insert tailored for DoFeed high-feed operations, optimised to remove large chip volumes at small axial depths. DoFeed high-feed geometry for large material removal TS200 Tungaloy grade for wear resistance and toughness Round 12 mm plate with 7.94 mm thickness Compatible with RNGN120700-T1 systems, no hole Faster cycles through high-feed performance The DoFeed family geometry is designed to deliver high material removal rates, reducing cycle time where shallow axial cuts are combined with increased feed per tooth. The TS200 cutting grade pairs wear resistance with toughness, which helps maintain a sharp cutting edge under the thermal and mechanical loads typical of high-feed milling. As a carbide indexable insert with round geometry, it spreads cutting forces more evenly, lowering vibration and enabling more stable machining. These characteristics make the component particularly suitable for demanding pocketing and face-milling tasks where consistent throughput is required. Practical integration with milling systems The insert is supplied as part of a system comprising a milling body, matching indexable inserts and fastening screws, ensuring straightforward assembly and repeatable positioning. The round 12 mm format and a thickness of 7.94 mm deliver mechanical rigidity, while the 0° relief angle and T1 chipbreaker promote controlled chip formation in high-feed scenarios. The design omits a central hole, simplifying clamping on bodies specified for holeless round inserts. Together, these features mean less downtime for tool changes and predictable tool life when paired with appropriate cutter bodies and tightening hardware. Reliable results and easy process adaptation Process planners benefit from predictable wear behaviour due to the TS200 grade developed by Tungaloy to balance edge stability and abrasive resistance. In practice, this results in fewer unexpected tool changes and more consistent surface finishes during repetitive milling operations. The insert supports both roughing-oriented high-feed passes and finishing pocket passes when feeds and speeds are adjusted accordingly. For engineers seeking process reliability, the combination of DoFeed geometry and TS200 carbide reduces variability and helps maintain productivity across series production or single-piece flow. For robust high-feed performance with the Tungaloy TS200 grade, contact Metav Werkzeuge to check stock availability and receive tailored machining recommendations Technical Data Article number: 6182040 Manufacturer SKU: TUN6182040 Supplier SKU: 6182040-Tungaloy Model series: DoFeed Application: Milling Manufacturer: Tungaloy Core specifications ISO designation: 120700 Plate size: 12 mm Plate thickness: 7.94 mm Relief angle: 0° Hole: without hole Chipbreaker: T1 Design & special features Material: Carbide Grade/coating: TS200 Geometry: Round insert System composition: milling body, matching inserts and screws Typical applications: High-feed milling, pocketing, face milling FAQ Which operations suit this insert best? The RNGN120700-T1 TS200 insert by Tungaloy is optimised for high-feed milling, pocketing and face milling where large chip volumes are required at small axial depths. What is the insert made from and what grade is used? This indexable insert is manufactured from carbide and supplied in the TS200 cutting grade, designed to combine wear resistance with cutting-edge stability. How is the insert secured in a milling body? The insert fits DoFeed-compatible milling bodies and is used together with the matching screws and cutter bodies specified for RNGN120700-T1 inserts; it features a holeless round format for the applicable clamping systems. What chip control can be expected? The integrated T1 chipbreaker supports reliable chip formation and evacuation during high-feed operations, contributing to stable cutting behaviour and predictable tool life. Which dimensions are relevant for tool selection? Key dimensions are a 12 mm plate size and a plate thickness of 7.94 mm; the ISO designation is 120700 for straightforward system matching. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNGN 120700 TS200 Wendeplatten - Tungaloy
Take advantage of the DoFeed high-feed concept and the TS200 cutting grade for high material removal with minimal axial engagement; the combination of a round geometry and the T1 chipbreaker provides stable chip formation and consistent tool life. Order the RNGN120700-T1 insert directly via Metav Werkzeuge or ask our consultants if needed. RNGN120700-T1 TS200 — round indexable insert for Fräsen, DoFeed series by Tungaloy A RNGN120700-T1 TS200 Tungaloy insert designed for high-feed milling, pocketing and face machining, optimised for large time material removal at small axial depths. DoFeed series for high-feed milling TS200 grade for wear resistance Round 12 mm insert with T1 chipbreaker Carbide construction for stable cutting Increased productivity through high-feed design The DoFeed family is built to maximise productive cutting when axial depths are deliberately small while volumetric removal rates remain high. The high-feed milling geometry reduces cycle time by allowing higher feed per tooth with stable engagement; this translates into lower machining cost per component when used in series production. The TS200 grade balances wear resistance and toughness, so the tool sustains cutting performance across varied steels and castings while maintaining surface quality. Integration into a suitable cutter body delivers repeatable results and predictable tool-life management. Consistent cutting and reliable chip control A round geometry combined with the T1 chipbreaker gives steady chip formation and reduced risk of edge chipping under interrupted cuts. The insert’s 0° relief angle ensures full-face contact in typical high-feed set-ups, supporting consistent cut behaviour at low axial depths. These features reduce vibration and improve dimensional stability during pocketing and face milling operations. As a result, set-up times can be shortened and finishing allowances minimised, which benefits throughput and downstream processing. Robust material and system compatibility for predictable performance Manufactured from carbide and supplied as part of the DoFeed system, the insert is designed to work with matching cutter bodies and fastening screws for safe clamping and accurate seat location. The RNGN120700-T1 insert’s combination of grade, geometry and chipbreaker supports versatile application across common milling tasks, providing good wear resistance and edge stability. Selecting this insert for high-volume milling promotes process stability, simplifies tool inventory and makes replacement straightforward thanks to standardised dimensions and designation. For application advice on Tungaloy DoFeed inserts, specification matching or supply options, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will advise on the correct variant for the machining task. Technical data Article number: 6158923 SKU: 6158923-Tungaloy Manufacturer SKU: TUN6158923 Model series: DoFeed Designation: RNGN120700-T1 Facts Size: 12 mm Thickness: 7.94 mm Relief angle: 0° Manufacturer article number: 6158923 Special features Carbide material Grade TS200 (Tungaloy) Chipbreaker T1 Round insert, without hole For milling (Fräsen) DoFeed high-feed milling family System: cutter body, indexable inserts and screws FAQ What applications suit this insert best? This insert is intended for high-feed milling operations such as face milling and pocketing; the RNGN120700-T1 TS200 excels where large material removal rates are required with small axial depths. Which material is the insert made from? The insert is manufactured from carbide, and the TS200 Tungaloy grade provides a balance of wear resistance and toughness for reliable milling performance. How does the chipbreaker affect machining? The T1 chipbreaker is designed for stable chip formation during high-feed milling, reducing the risk of edge chipping and supporting consistent surface finish. Does this insert fit standard DoFeed cutter bodies? Yes, the insert is part of the DoFeed system and is compatible with matching cutter bodies and fastening screws intended for this series. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNGN 120700 TS300 Wendeplatten - Tungaloy
Take advantage of the combination of high metal removal rates, TS300 wear performance and a compact round geometry for efficient pocket and face milling; order directly via Metav Werkzeuge or contact our consultants for specification support. RNGN120700-T1 TS300 RNGN — Tungaloy indexable insert for milling (high-feed) The RNGN120700-T1 TS300 is a round indexable insert designed for high-feed milling, optimised for pocketing and face machining in production environments. High-feed design for large chip volumes TS300 grade for wear resistance Round 12 mm plate, 7.94 mm thick Chipbreaker T1 for controlled chips Faster material removal with minimal axial depth The DoFeed-series geometry delivers high-feed milling capability, enabling significantly increased material removal per tooth while keeping axial engagement small. This reduces cycle times in machining pockets and facing operations and lowers heat input per cut. The insert’s round form and the chipbreaker T1 work together to maintain consistent chip flow, which supports stable cutting conditions and reduces the need for rework. Process parameters benefit from the combination of geometry and grade, allowing shops to raise productivity without major changes to fixture or machine setup. Long-lasting cutting edge and dependable wear behaviour Made from carbide and specified in TS300, this grade balances wear resistance and toughness to preserve edge stability under interrupted cuts and heavy feed rates. The choice of TS300 accompanies the geometry to provide a resilient cutting edge that extends tool life and maintains surface quality over multiple indexings. The neutral 0° clearance angle supports versatile engagement angles on standard milling bodies and helps avoid unexpected contact, improving reproducibility and reducing setup adjustments between operations. Simple integration into modular milling systems The insert is part of a system concept comprising the milling body, matching inserts and fastening screws, which streamlines tool assembly and replacement in production processes. With a 12 mm diameter and a plate thickness of 7.94 mm, the round geometry without a hole offers straightforward seating in compatible tool holders and supports repeatable positioning. Documentation for the DoFeed family highlights recommended cutting directions and secure clamping practices, facilitating quick tool changes and minimal downtime for maintenance or index rotations. For high-feed milling applications, request the Tungaloy RNGN120700-T1 TS300 insert from Metav Werkzeuge for rapid delivery and expert application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6158924 Manufacturer SKU: TUN6158924 SKU: 6158924-Tungaloy Model series: DoFeed Application: Milling Facts Insert designation: RNGN120700-T1 ISO code: 120700 Plate size: 12 mm Thickness: 7.94 mm Clearance angle: 0° Special features Carbide material Grade TS300 (Tungaloy) Chipbreaker T1 Round geometry No hole High-feed milling family System: milling body, matching inserts and screws FAQ What machining tasks is this insert best suited for? The RNGN120700-T1 TS300 insert is intended for high-feed milling tasks such as pocketing and face milling, where large chip volumes with small axial depths are required. What does the TS300 grade provide? TS300, a Tungaloy grade, offers a balance of wear resistance and toughness to support stable edge retention and consistent tool life under production milling conditions. How does the chipbreaker T1 improve performance? The chipbreaker T1 on this indexable insert helps produce uniform chips and minimises recutting, which stabilises cutting forces and contributes to a more reliable machining process with improved surface finish. Is the insert compatible with standard DoFeed holders? Yes, the RNGN120700-T1 is designed for the DoFeed series and integrates into systems composed of milling bodies, matching inserts and screws for secure and repeatable mounting. Does the round geometry affect tool life or cutting strategy? The round geometry provides continuous cutting engagement and allows higher feed per tooth; combined with the TS300 grade and chipbreaker it supports extended tool life in high-feed operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNGN 120700 TS300 Wendeplatten - Tungaloy
Combining the DoFeed high-feed geometry with the TS300 wear-resistant grade and a robust cemented carbide substrate delivers efficient high-volume material removal with minimal axial engagement; order the RNGN120700-T1 directly via Metav Werkzeuge or consult the technical team for optimum selection and stock information. RNGN 120700 TS300 – RNGN indexable insert for milling (Tungaloy) A RNGN120700-T1 TS300 indexable insert engineered for high-feed milling, ideal for pocket and face operations within the DoFeed family and suited to demanding production environments. DoFeed high-feed geometry TS300 wear-resistant Tungaloy grade Round insert, size 12, 7.94 mm thickness Designed for pocket and face milling Boosted material removal with minimal axial depth The DoFeed family focuses on maximising throughput with low axial engagement; this insert transfers that concept into dependable machining performance. The combination of the high-feed geometry and a 0° free angle permits large time‑span volumes per pass while keeping cutting forces within predictable limits, which increases process stability. For shopfloors aiming to reduce cycle times, the result is a measurable uplift in productivity and a lower cost per component through fewer passes and consistent chip control. Balanced grade and geometry for extended tool life The TS300 grade, developed by Tungaloy, balances wear resistance, toughness and edge stability to suit milling duties at elevated feed rates. When mounted in a compatible DoFeed cutter body, the cemented carbide substrate and T1 chipbreaker ensure repeatable edge condition and predictable flank wear. The geometry promotes favourable chip formation in pocketing and face milling, reducing the need for frequent insert changes and maintaining surface quality across long production runs. Practical system integration and predictable results Delivered as part of a system comprising a milling body, matching indexable inserts and fixing screws, this insert supports straightforward assembly and toolset standardisation. The round form and lack of a central hole simplify indexing and make the component robust under intermittent engagement. Integration into existing DoFeed toollines enables reliable process parameters and easier inventory management, supporting lean machining strategies and stable series production. Application guidance and selection clarity Intended primarily for milling applications such as high‑feed pocketing and face operations, the insert’s dimensions—size 12 and 7.94 mm plate thickness—allow clear matching to toolholders and cutter bodies. The product delivers consistent chip control via the T1 chipbreaker and is best employed where reduced axial depth per pass and higher feed rates are targeted. For customers requiring confirmation of suitability for specific materials or cycle times, technical consultation is available to align cutting data and machine capability. For application matching, availability and ordering of Tungaloy DoFeed inserts contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the RNGN120700-T1 and compatible tooling options Technical data Article number: 6182042 Manufacturer SKU: TUN6182042 SKU: 6182042-Tungaloy Designation: RNGN120700-T1 TS300 Tungaloy indexable insert Facts Insert size: 12 Plate thickness: 7.94 mm Free angle: 0° Shape: round Special features Grade: TS300 (Tungaloy) Substrate: cemented carbide Chipbreaker: T1 Hole: without hole Model series: DoFeed Application: high-feed milling, pocket and face milling System composition: milling body, matching indexable inserts and screws FAQ What types of milling is this insert designed for? The RNGN120700-T1 is tailored for high-feed milling, with particular suitability for pocketing and face machining within DoFeed cutter systems. Which material and grade form the cutting edge of this insert? This indexable insert uses a TS300 Tungaloy grade on a cemented carbide substrate, designed to balance wear resistance and toughness for sustained production. How does the T1 chipbreaker affect performance? The T1 chipbreaker on the RNGN120700-T1 improves chip control during high-feed passes, supporting consistent surface finish and reducing the risk of chip-related interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNMG 090300 T9215 Wendeplatten - Tungaloy
High wear resistance and consistent performance from the T9215 CVD-coated carbide, combined with ISO conformity and a secure cylindrical-hole mounting, make this insert a reliable choice for productive turning; order directly via Metav Werkzeuge or consult our technical team for application advice. RNMG090300-61 T9215 ISO turning insert for medium steel — Tungaloy A RNMG090300-61 T9215 ISO-compliant turning insert engineered for productive external and internal turning of medium steels. CVD-coated carbide for high wear resistance Grade T9215 for medium steel machining Round 09 form with cylindrical hole Thickness 3.18 mm for robust rigidity High, consistent productivity for medium-steel turning The CVD-coated carbide grade T9215 delivers a balance of wear resistance and fracture toughness that supports continuous to slightly interrupted cuts in medium steel. As an ISO-compliant insert, the RNMG090300-61 is designed for repeatable results across batches and operators, reducing set-up variability and improving overall throughput. The combination of a robust substrate and a protective coating extends tool life, which lowers changeover frequency and contributes to stable component quality in serial production. Secure seating and straightforward holder compatibility Compatibility with toolholders is determined by form, clearance, tolerance class, fastening, size and thickness; this insert’s round 09 geometry with a cylindrical hole and 0° clearance ensures reliable clamping and precise seating in standard ISO holders. The design reduces micro-movements under load and supports consistent cutting engagement, which benefits surface finish and dimensional control. When selecting a holder, match the insert’s size and thickness (notably 3.18 mm) and the specified fastening method to guarantee proper fit and safe operation. Coating and substrate explained for predictable tool life The CVD-coated carbide construction combines a hard, wear-resistant surface with a tough carbide core to resist abrasion and chipping during production runs. This structure makes the grade particularly suited to the typical demands of medium steel, where a combination of adhesion wear and mechanical stress occurs. The integrated chipbreaker 61 geometry controls chip flow for efficient evacuation, aiding machinability and protecting the cutting edge—an asset for shops prioritising consistent cycle times and minimal secondary rework. Discuss application requirements with Metav Werkzeuge and secure the Tungaloy RNMG090300-61 T9215 inserts — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and prompt processing Technical Data Article number: 6773897 Manufacturer SKU: TUN6773897 SKU: 6773897-Tungaloy Model series: ISO turning inserts Designation: RNMG090300-61 Material: Carbide Grade: T9215 Chipbreaker: 61 Shape: round Hole: cylindrical hole Thickness: 3.18 mm Clearance angle: 0° Facts Thickness: 3.18 mm Size: 09 Clearance angle: 0° Manufacturer article number: 6773897 Manufacturer SKU: TUN6773897 Special features CVD-coated carbide Suited for medium steel machining For continuous to slightly interrupted cuts ISO-compliant insert Cylindrical-hole mounting FAQ What materials is this insert best suited for? The RNMG090300-61 T9215 insert is optimised for medium steel machining; the CVD-coated carbide T9215 grade combines wear resistance and toughness suitable for these materials. How does the chipbreaker 61 affect performance? Chipbreaker 61 promotes controlled chip formation and evacuation. In the RNMG090300-61 configuration this contributes to stable cutting forces and improved surface finish during continuous to slightly interrupted cuts. Which holder features must be matched for secure mounting? Secure mounting requires matching the insert’s form, thickness (3.18 mm), size (09), fastening method and clearance angle (0°); the cylindrical hole ensures axial location in compatible ISO holders. What does the T9215 designation mean for tool life? T9215 denotes a CVD-coated carbide composition tuned for balanced wear resistance and fracture toughness, which typically yields longer life under productive machining conditions with medium steels. Is this insert suitable for interrupted cuts? Yes. The grade and geometry are intended for continuous to slightly interrupted cuts; more severe interruptions may require different geometries or grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNMG 090300 T9225 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that balances toughness and wear resistance for medium to heavy steel turning; the ISO-standard geometry ensures straightforward compatibility with standard holders when form, relief angle and thickness match. Order original Tungaloy inserts directly via Metav Werkzeuge or consult our team for holder matching and cutting-condition advice. RNMG 090300 T9225 – Indexable turning insert by Tungaloy (CVD-coated carbide, chipbreaker 61) RNMG090300-61 T9225 is an ISO-standard indexable turning insert designed for external and internal turning in steel applications, offering a robust universal grade for medium to heavy cutting conditions ISO-standard RNMG insert size 09 CVD-coated carbide grade T9225 0° relief angle with cylindrical hole Chipbreaker 61 optimised for steel turning Reliable performance for mixed and interrupted cuts The combination of CVD-coated carbide and the T9225 grade provides a balance of hardness and toughness that is suited to moderate-to-heavy steel machining and variable engagement conditions. The coating improves wear resistance at elevated temperatures, while the substrate carbide retains edge integrity during slight interruptions. This results in consistent tool life and reduced edge chipping compared with uncoated substrates, supporting predictable machining cycles and fewer unscheduled insert changes. Compatibility and secure clamping for steady results Compatibility with tool holders is determined by geometry: the insert form, 0° relief angle, tolerance class, fixing style, size and 3.18 mm thickness must match the holder specification. The RNMG form and its cylindrical hole enable secure clamping in many ISO-style external holders and boring bars. Choosing the correct holder and tightening sequence stabilises the cutting edge, reduces vibration and improves surface finish, particularly when facing varying depths of cut. Why the chipbreaker and round form matter The chipbreaker 61 is tuned for steel applications to produce controlled chips and reliable evacuation in through‑feed and interrupted cuts. The round plate form distributes cutting forces more evenly, which helps in applications where component support or tool rigidity is variable. Together, these design features lower the risk of built-up edge and support continuous productivity in shop-floor turning operations. Practical advantages for production shops Using this insert in a matched system—ISO insert, compatible external holder or boring bar, backing/shim and correct clamp screw—delivers a practical, cost-effective solution for repetitive turning tasks. The ISO-standard designation simplifies reordering and inventory management, while the CVD coating and universal grade reduce the need for frequent grade changes across mixed steel batches. If additional data or holder recommendations are required, technical assistance is available by email or phone: info@metav-werkzeuge.com, +49 2822 7131930 Contact Metav Werkzeuge for original Tungaloy RNMG090300-61 inserts and expert advice on holder matching and cutting parameters Technical data Article number: 6780937 Manufacturer SKU: TUN6780937 SKU: 6780937-Tungaloy Model series: ISO-indexable turning inserts Product designation: RNMG090300-61 T9225 Facts Thickness: 3.18 mm Size: 09 ISO code: 090300 Relief angle: 0° Chipbreaker: 61 Special features Material: CVD-coated carbide Grade: T9225 (robust universal grade) Plate form: round Hole: with cylindrical hole Application: turning (external and internal) Suitable system: insert + holder/boring bar + backing/shim + clamp screw FAQ What machining tasks is this insert intended for? This RNMG090300-61 T9225 indexable insert (Tungaloy, SKU 6780937-Tungaloy) is intended for external and internal turning of steel where medium to heavy cuts or slightly interrupted cuts require a tougher grade. How does the T9225 grade affect performance? The T9225 grade combines a tough substrate with a CVD coating, so the insert maintains edge strength under variable engagement and offers improved wear resistance for prolonged cutting in steel. Which holders are compatible with this insert? Compatibility is determined by insert form, size, 0° relief angle, thickness (3.18 mm) and hole style; using an ISO-compatible external holder or boring bar matched to RNMG geometry ensures secure clamping and optimal performance. Is the chipbreaker suitable for difficult chip control situations? Yes, the chipbreaker 61 is optimised for steel turning and supports controlled chip formation and evacuation in both continuous and slightly interrupted cuts. Can this insert be used for stainless or non-ferrous materials? The RNMG090300-61 is specified for steel machining in its design intent; for other materials different grades or chipbreakers may be more appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNMG 120400 AH120 Wendeplatten - Tungaloy
Optimise turning processes with the PVD-coated AH120 carbide grade and the ISO RNMG form for reliable, sharp cutting and reduced tool change frequency. Order the RNMG120400-61 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. RNMG 120400 AH120 turning insert by Tungaloy RNMG120400-61 AH120 Tungaloy is an ISO‑standard turning indexable insert designed for external and internal turning, offering wear- and fracture-resistant performance in production environments. ISO‑standard RNMG form for easy replacement PVD-coated carbide AH120 for increased wear resistance Suitable for external and internal turning Cylindrical hole for secure clamping Sharp cutting edge with high process stability Greater process stability through a wear-resistant grade The combination of a PVD-coated surface and the AH120 carbide grade delivers consistent performance in turning operations where a sharp cutting edge and reliability are required. The coating reduces abrasive wear and helps maintain edge retention during extended cycles, which in turn supports predictable tool life and fewer interruptions to production. Explaining the coating briefly: PVD coating applies a thin, hard layer that enhances surface hardness without compromising core toughness, so the insert balances durability and fracture resistance. Secure clamping and ISO compatibility cut setup time Compatibility with holders is determined by form, clearance angle, tolerance class, attachment, size and thickness; the RNMG geometry and the cylindrical hole ensure repeatable seating and secure fastening. With a nominal plate size of 12 mm and a plate thickness of 4.76 mm, the insert fits standard ISO RNMG holders and minimises play that can affect surface finish and dimensional accuracy. Clear specifications reduce uncertainty during tool selection and speed up changeovers on the machine. Versatile application coverage for routine and demanding turning Designed for both external and internal turning, the insert supports a wide range of workpiece materials when the correct chipbreaker and grade are selected. The AH120 grade is formulated to be both wear‑ and fracture‑resistant, making it suited to pragmatic production scenarios where process safety is as important as cutting performance. For machining strategies that demand stability, matching the chipbreaker and insert grade to the workpiece and setup will deliver consistent surface quality and repeatable results. Discuss application requirements for the Tungaloy RNMG120400-61 with Metav Werkzeuge to receive tailored recommendations and fast availability; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6805899 Manufacturer SKU: TUN6805899 SKU: 6805899-Tungaloy Product designation: RNMG120400-61 Model series: ISO turning indexable inserts Material: carbide Facts Plate size: 12 mm Plate thickness: 4.76 mm Clearance angle: 0° ISO code: 120400 Special features PVD-coated carbide grade AH120 RNMG (round) insert form Cylindrical hole for clamping Chipbreaker style: 61 Suitable for external and internal turning Compatibility depends on form, clearance angle, tolerance class, attachment, size and thickness FAQ What materials is this insert suitable for? The RNMG120400-61 AH120 Tungaloy insert is designed for a broad range of materials when the correct chipbreaker and machining parameters are used; the AH120 grade emphasises wear and fracture resistance for stable turning. How does the PVD coating improve performance? A PVD coating on the insert increases surface hardness and wear resistance, which helps the RNMG120400-61 maintain a sharp cutting edge and deliver consistent results over longer tool life. Which holder features are required for proper compatibility? Compatibility requires a holder that matches the RNMG form, clearance angle (0°), tolerance class, attachment type, size (12 mm) and plate thickness (4.76 mm) to ensure secure clamping and repeatable positioning. Is this insert suitable for both internal and external turning? Yes, the geometry and chipbreaker option make the insert appropriate for both external and internal turning operations provided the machining setup and stability are adequate. How is chip control addressed with this insert? Chip control is achieved by selecting the chipbreaker style 61 together with the AH120 grade; this pairing helps produce predictable chips and supports process safety during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNMG 120400 T9205 61 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance and ISO conformity for efficient, predictable turning of steel; the secure cylindrical hole and 0° clearance support stable clamping and repeatable results. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. RNMG 120400 T9205 — Tungaloy ISO turning insert for turning operations The RNMG120400-61 T9205 is an ISO-format turning insert engineered for productive external and internal turning of steel under stable machining conditions. RNMG 120400 geometry, ISO standard CVD-coated carbide T9205 for steel 0° clearance for stable turning Cylindrical hole, compatible with standard holders Maximised productivity through wear-resistant coating and geometry The RNMG120400-61 T9205 insert combines a CVD coating with a tungsten carbide substrate to deliver higher wear resistance and consistent edge stability at elevated cutting speeds. The CVD layer provides a hard, thermally resistant surface that slows abrasive wear, while the substrate preserves toughness at the cutting edge. With the chipbreaker 61 geometry, chip formation is controlled to reduce interruptions and tool change frequency, which translates directly into improved productivity and lower unit machining cost for series turning tasks. Secure clamping and ISO compatibility for reliable setup The insert’s ISO-compliant form ensures straightforward matching to holders when form, clearance angle, tolerance class, fastening method, size and thickness are observed. The cylindrical hole and the standard screw interface support firm seating and repeatable positioning in compatible external holders or boring bars. Given the 0° clearance, the geometry is optimised for stable setups where axial and radial rigidity are assured, helping to maintain surface finish and dimensional accuracy in continuous turning operations. Practical benefits and system considerations for shop use Using this grade and geometry under the recommended stable conditions offers predictable tool life and easier process planning. The system is built from the ISO insert plus a suitable external holder or boring bar, a shim/clamp set and spare screws, which simplifies inventory and replacement routines. Select the chipbreaker and cutting data to match the workpiece steel and the machine’s rigidity; this approach reduces downtime and supports efficient batch production while preserving surface integrity. Contact Metav Werkzeuge today for tailored advice on Tungaloy turning inserts and to secure the RNMG 120400 T9205 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6785784 Manufacturer SKU: TUN6785784 SKU: 6785784-Tungaloy Model series: ISO turning inserts Designation: RNMG120400-61 Grade/coating: T9205 Manufacturer: Tungaloy Facts Size: 12 mm Thickness: 4.76 mm Clearance angle: 0° Chipbreaker: 61 Hole: cylindrical Material: carbide Special features CVD-coated grade designed for steel ISO geometry for holder compatibility Suitable for external and internal turning System: insert, suitable external holder or boring bar, shim/clamping set and spare screws FAQ What materials is this grade best suited for? The T9205 grade is a CVD-coated carbide formulated for productive machining of steel; the RNMG120400-61 insert performs best where stable cutting conditions and higher cutting speeds are possible. How is compatibility with a holder determined? Compatibility depends on ISO geometry, clearance angle, tolerance class, fastening method, size and thickness; the RNMG120400-61’s cylindrical hole and ISO form make it compatible with standard holders that accept RNMG inserts. What advantage does the chipbreaker 61 provide? The chipbreaker 61 promotes controlled chip formation in turning, reducing entanglement and interruptions, which supports continuous operation and consistent surface quality. Can this insert be used for internal as well as external turning? Yes, the insert’s ISO geometry and the system concept allow use in both external holders and suitable boring bars for internal turning, provided proper clamping and rigidity are maintained. What is included in the typical system for using this insert? The system comprises the ISO insert plus a matched external holder or boring bar, a shim/clamping set and replacement screws to ensure secure mounting and straightforward maintenance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNMG 120400 T9215 Wendeplatten - Tungaloy
Combining the CVD‑coated carbide T9215 with the ISO RNMG form and a cylindrical mounting hole delivers consistent wear resistance and dependable chip control for mid‑steel turning operations; order this Tungaloy insert via Metav Werkzeuge or consult our specialists for grade and chipbreaker selection. RNMG120400 T9215 Turning insert for turning – Tungaloy A RNMG120400-61 T9215 Tungaloy insert engineered for external and internal turning, offering ISO compatibility, a cylindrical hole and a 0° relief angle for stable cutting. *RNMG 120400 shape, ISO standard insert *CVD-coated carbide grade T9215 for mid‑steel *High wear resistance with fracture toughness *Cylindrical hole; 0° relief angle; 4.76 mm thickness Boosted productivity through material and grade choice The combination of a CVD‑coated surface and carbide substrate in grade T9215 is optimised for mid‑steel machining, balancing wear resistance with reliable edge strength. This layout supports sustained cutting at productive feed and speed settings, making the component a practical choice where consistent output and tool life are priorities. The chipformer code and grade work together to reduce unexpected edge fracture, which helps maintain cycle times and lowers unplanned tool changes. Predictable tool performance from proven geometry The insert’s RNMG geometry and ISO conformity provide straightforward interchangeability with compatible holders. The cylindrical hole and defined 0° relief angle help ensure repeatable clamping and axial stability; matching the holder by form, clearance, tolerance class, fastening method, size and thickness secures the assembly. Clear specification of these parameters reduces setup time and supports predictable part tolerances during both external and internal turning operations. What the coating and substrate mean in practice A CVD (chemical vapour deposition) finish deposits a hard, wear‑resistant layer over the carbide substrate, improving thermal stability at the cutting edge and prolonging life under continuous cutting. In practical terms, the coating enhances resistance to abrasive wear while the carbide core provides fracture toughness; the result is a balanced solution for continuous to light interrupted cuts in medium‑strength steels. For operators less familiar with coatings, this means fewer changes and steadier surface finishes over comparable uncoated grades. System compatibility and application guidance The insert works as part of a system that includes an ISO external holder or boring bar, an underlay/shim and clamping set plus replacement screws. Select the 61 chipbreaker and T9215 grade to match workpiece stability, machining strategy and desired surface finish. For slightly interrupted cuts the grade’s fracture resistance is advantageous; for heavy interruptions a different grade or geometry may be preferable. Specification clarity at purchase reduces trial‑and‑error and supports more efficient tool consumption in production. Contact Metav Werkzeuge for tailored advice on grade selection and holder matching for Tungaloy turning inserts; reach our specialists at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6772282 Manufacturer SKU: TUN6772282 Model series: ISO turning inserts Material: carbide Manufacturer: Tungaloy Facts Insert designation: RNMG120400-61 ISO code: 120400 Size: 12 mm Thickness: 4.76 mm Relief angle: 0° Hole: with cylindrical hole Chipbreaker: 61 Special features CVD-coated carbide grade T9215 Suited for medium steel machining For continuous to light interrupted cuts ISO‑standard geometry for holder compatibility System: insert, external holder or boring bar, shim/clamping set and replacement screws FAQ What is the primary application for this insert? The RNMG120400-61 T9215 Tungaloy turning insert is designed for external and internal turning, primarily in medium‑strength steel where continuous to light interrupted cuts are required. Which materials are best machined with the T9215 grade? Grade T9215 is a first choice for mid‑steel machining; the CVD‑coated carbide composition offers a balance of wear resistance and fracture toughness suited to these materials. How is the insert mounted and what must be matched to the holder? Mounting uses a cylindrical hole and retention system; compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness, so proper holder selection is essential for repeatable performance with the RNMG120400-61 insert. What advantages does the CVD coating provide in daily use? A CVD coating on the Tungaloy insert increases thermal and abrasive resistance at the cutting edge, improving tool life and maintaining surface finish over extended runs compared with uncoated alternatives. Is this insert suitable for interrupted cuts? The RNMG120400-61 T9215 insert is suitable for continuous to light interrupted cuts; for heavy interruptions a grade with greater impact resistance or an alternate chipbreaker should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
RNMG 120400 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated T9225 grade combined with ISO RNMG geometry for consistent medium-to-heavy steel turning; the result is increased process stability and longer tool life. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application-specific selection. RNMG 120400 T9225 — ISO turning insert by Tungaloy The RNMG120400-61 T9225 is an ISO-standard turning insert designed for medium to heavy steel turning where toughness and interrupted-cut resistance are required ISO RNMG geometry for standard holders CVD-coated carbide grade T9225 for toughness Suitable for medium to heavy steel turning With cylindrical mounting hole for secure fit Plate thickness 4.76 mm for stable cutting Longer, more reliable cutting under variable conditions The combination of a CVD-coated surface and a carbide substrate provides a balance of wear resistance and fracture toughness that supports extended machining cycles. The T9225 grade is tailored as a robust universal option for medium-to-heavy steel turning where changing engagement or light interruptions occur; this reduces downtime associated with frequent insert changes and helps maintain consistent component quality. By stabilising edge life, manufacturers benefit from predictable tool-change intervals and improved productivity. Clear compatibility and secure mounting for repeatable set-ups Designed to the ISO RNMG form, the insert fits into holders that conform to the same standard; compatibility depends on form, relief angle, tolerance class, fastening and thickness. The cylindrical mounting hole ensures a reliable clamping interface in standard outside holders or boring bars, supporting repeatable positioning and concentricity. Using standardised geometry simplifies tool inventory and makes it straightforward to match the cutting edge to the holder and workpiece demands, reducing set-up time and potential errors. Practical material performance and application guidance The T9225 composition combines a wear-resistant coating with a tough carbide core, making it suitable for a broad range of steels and for operations where intermittent cuts or variable feeds occur. The insert’s 4.76 mm thickness and 0° relief contribute to dimensional stability and edge support during heavier engagement. For best results, select a matching chipbreaker 61 and pair with an appropriate holder and clamping set; this approach optimises chip control and surface finish while maintaining cutting-edge security. Contact Metav Werkzeuge for tailored application advice, availability of genuine Tungaloy RNMG120400-61 inserts and to request batch or technical documentation via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6780841 SKU: 6780841-Tungaloy Manufacturer SKU: TUN6780841 Model series: ISO turning inserts Designation: RNMG120400-61 Data Insert size: 12 mm Plate thickness: 4.76 mm Relief angle: 0° Chipbreaker: 61 ISO code: 120400 Special features Material: carbide Coating: CVD-coated Grade: T9225 (robust universal for medium-heavy steel) Mounting: with cylindrical hole Application: turning (outside and inside) FAQ What materials is this insert suitable for? The RNMG120400-61 T9225 insert is engineered primarily for steel machining and performs well in medium-to-heavy steel turning where intermittent engagement or variable conditions demand toughness. How does the T9225 grade influence tool life? The T9225 CVD-coated carbide grade provides a balance of wear resistance and fracture toughness, which typically extends edge life under mixed cutting conditions and reduces unplanned tool changes. Which holders are compatible with this ISO insert? Compatibility follows ISO RNMG form and depends on holder geometry, relief angle, tolerance class, fastening method and thickness; the cylindrical mounting hole ensures secure clamping in compatible standard holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNMG 120400 T9235 61 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide T9235 grade with the RNMG geometry and chipbreaker 61 ensures reliable performance in interrupted cuts and unstable conditions; order the inserts via Metav Werkzeuge or consult their technical advisors for application-specific recommendations. RNMG 120400 T9235 RNMG120400-61 — Tungaloy turning insert with CVD-coated carbide and chipbreaker 61 The RNMG120400-61 insert is an ISO-standardised turning grade designed for steel machining under interrupted or unstable cutting conditions. CVD-coated grade T9235 for steel ISO RNMG geometry (round, 12 mm) 0° clearance angle for specific cutting profiles Cylindrical hole for secure clamping Greater reliability when machining interrupted cuts The CVD coating combined with the T9235 carbide grade is formulated to resist chipping and premature wear when machining steel at moderate cutting speeds. In practice, this means improved edge stability in interrupted cuts and when workpiece support is less than ideal. The chipbreaker 61, matched to the RNMG shape, helps control chip formation and evacuation, which reduces the risk of rework and supports a steadier production rhythm. Fast, repeatable insert changes and secure clamping The insert’s round, 12 mm format with a cylindrical hole and defined tolerance class enables reliable seating in ISO-compatible holders. Because compatibility is determined by form, clearance angle, tolerance class, fixing style, size and thickness, the insert integrates easily into established tool systems when the correct clamping components are used. The system approach — insert, holder, shim and clamping set — lowers changeover time and increases positional repeatability, contributing to shorter downtimes and more predictable machining cycles. Predictable results and selection guidance for turning operations ISO standardisation ensures interchangeability across comparable tool systems and simplifies logistics for batch production. The 0° clearance angle and the T9235’s toughness make this grade particularly suited to steel when lower cutting speeds are chosen or when intermittent cutting is unavoidable. For best results, match the chipbreaker and grade to the material, workpiece support and machine stability; this balanced selection maximises tool life and surface quality while keeping operating costs under control. For complex tasks, consult technical specifications or Metav Werkzeuge’s advisors to select the optimal chipformer and process parameters. Contact Metav Werkzeuge for availability and application advice on the Tungaloy RNMG120400-61 insert; technical support is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6785940 Manufacturer SKU: TUN6785940 Model series: ISO-Drehwendeschneidplatten SKU: 6785940-Tungaloy Core data ISO designation: RNMG120400-61 Insert size: 12 mm Thickness: 4.76 mm Clearance angle: 0° Chipbreaker: 61 Features / Compatibility Material: carbide Coating: CVD Grade: T9235 Hole style: cylindrical hole Shape: round Application: turning Compatible with ISO holders and clamping systems FAQ Which materials is this insert best suited for? The RNMG120400-61 in T9235 grade is optimised for machining steel, particularly where interrupted cuts or unstable conditions require a tougher grade and reliable edge behaviour. How is the insert secured in the holder? The insert uses a cylindrical hole and is intended for ISO-compatible holders; correct clamping components (shim, clamping set and screws) ensure secure and repeatable seating. What is the purpose of chipbreaker 61? Chipbreaker 61 is engineered to manage chip formation for the RNMG geometry, improving evacuation and reducing the chance of built-up edge during steel turning. Is this insert coated and how does the coating help? Yes — the insert features a CVD coating that enhances wear resistance and helps maintain edge integrity in interrupted cutting and at moderate cutting speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNMG 120400 TH10 Wendeplatten - Tungaloy
Combining TH10 uncoated carbide with ISO compatibility and a 0° relief angle yields low cutting forces and clean surface finishes for efficient turning operations; order directly via Metav Werkzeuge or consult our specialists for application advice. RNMG 120400 TH10 indexable insert for turning, 0° relief — Tungaloy RNMG 120400 TH10 is an ISO indexable insert designed for external and internal turning, optimised for non-ferrous materials and applications requiring a sharp, uncoated cutting edge ISO-compliant indexable insert TH10 uncoated carbide grade 12 mm size, 4.76 mm thickness Cylindrical hole, 0° relief angle Low cutting forces and improved surface quality for non-ferrous turning The combination of the TH10 grade and an uncoated carbide cutting edge is aimed at operations where reduced cutting resistance and a clean finish are priorities. The sharp, universal grade supports machining of non-ferrous metals and similar materials by lowering the power demand and limiting built-up edge formation. The integrated chipbreaker 61 promotes consistent chip control, reducing interruptions and contributing to predictable cycle times. For workshops seeking steady throughput, this insert offers a rational improvement in process efficiency without complex tool management. Reliable ISO compatibility for straightforward tool changes Manufactured to the ISO series for turning inserts, the component ensures compatibility when the holder matches form, clearance, tolerance class, attachment method, size and thickness. The standardised geometry simplifies inventory management and minimises downtime during index changes. The insert’s 0° relief angle and cylindrical locating hole require a suitable indexable holder or boring bar and the correct clamping kit; once paired correctly, replacement is rapid and repeatable, supporting stable machining and consistent component quality. Durable, economical performance with precise cutting behaviour Made from carbide and supplied in the TH10 uncoated grade, the insert balances tool life and edge sharpness for many finishing and light cutting tasks. The round form and the specified dimensions (12 mm size, 4.76 mm thickness) provide a stable seat in the toolholder and help maintain surface integrity, while the uncoated edge keeps cutting forces low where coatings might increase friction. For production environments that prioritise predictable part quality and straightforward tool handling, this solution delivers measurable benefits to cycle reliability and cost-per-part. For precision turning with the Tungaloy TH10 grade, contact Metav Werkzeuge for tailored application advice or to secure stock — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6805904 Manufacturer SKU: TUN6805904 Merchant SKU: 6805904-Tungaloy Facts Insert designation: RNMG120400-61 Series: ISO turning inserts Size: 12 mm Thickness: 4.76 mm Relief angle: 0° Hole: cylindrical hole Chipbreaker: 61 Special features Grade: TH10 uncoated carbide Application: turning Compatibility: ISO standard; holder form, clearance and tolerance must match FAQ What materials is this insert best suited for? The TH10 uncoated carbide insert is intended primarily for non-ferrous materials and applications where a sharp, uncoated edge supports low cutting forces and clean surfaces; the RNMG120400-61 performs well in those contexts. How does the chipbreaker 61 affect machining? Chipbreaker 61 on the RNMG insert improves chip control and evacuation, which helps maintain stable cutting conditions and reduces interruptions during turning operations. Is the insert compatible with standard ISO holders? Yes, the insert is part of the ISO turning insert series; compatibility depends on matching holder form, clearance (0° relief), tolerance class, attachment and the insert’s size and thickness. What are the key dimensions to check when replacing an insert? Confirm the insert designation RNMG120400-61, the size (12 mm), the thickness (4.76 mm) and the relief angle (0°), plus the presence of the cylindrical locating hole to ensure correct seating. Does the uncoated TH10 grade require special speeds or feeds? Cutting parameters should be selected according to workpiece material, rigidity and toolholder; the uncoated TH10 grade favours moderate cutting forces and is often chosen where a clean finish and low resistance are desired. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RNMG 150600 T9215 Tungaloy Wendeplatten - Tungaloy
Take advantage of the combination of high productivity, robust wear resistance and ISO compatibility for reliable, repeatable turning operations; order directly via Metav Werkzeuge or consult our specialists for machining recommendations. RNMG150600-61 T9215 Tungaloy insert for turning The RNMG150600-61 T9215 Tungaloy insert is an ISO-standard turning insert designed for external and internal turning, offering a balance of wear resistance and fracture toughness for medium-steel machining. ISO-standard round turning insert RNMG format CVD-coated carbide T9215 for medium steel High wear resistance with fracture toughness Compatible with holders featuring a cylindrical hole Reliable productivity for medium-steel turning The RNMG150600-61 T9215 grade combines a CVD-coated surface with a tough cemented carbide substrate to extend tool life under continuous and lightly interrupted cuts. This results in a measurable increase in uptime and stable component tolerances, making the insert a practical choice where consistent cycle times and repeatable surface quality are required. The design focuses on predictable wear behaviour rather than aggressive, short-lived performance. Secure clamping and straightforward holder compatibility The round ISO insert format with a cylindrical hole and a defined clearance angle of 0° provides secure mechanical locating in appropriately rated holders. Compatibility depends on form, clearance, tolerance class, fastening, size and thickness; when matched correctly, the result is reduced vibration and improved stable machining, which helps protect the cutting edge and the workpiece finish. What the T9215 grade means in practice The T9215 designation denotes a CVD-coated cemented carbide specifically balanced for mid-range steel applications. The coating reduces abrasive wear, while the substrate offers resistance to chipping at interrupted cuts—together they reduce the frequency of insert changes and support higher feed rates. For workshops aiming to raise productivity without compromising part quality, this grade offers a reliable compromise between durability and fracture resistance. Practical integration and machining guidance Use this insert primarily for external and internal turning of medium-strength steels; pair the chipbreaker 61 with a holder matched to the RNMG format and the machine's rigidity. Selecting the correct chipbreaker and matching the insert thickness (6.35 mm) and size (15 mm) to the clamping system ensures repeatable results. If additional machining data or cutting recommendations are required, technical assistance and sample testing advice are available via Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Contact Metav Werkzeuge for tailored technical advice on the Tungaloy T9215 grade, recommendations for compatible holders and chipbreakers, or to request a cutting parameter sheet and sample evaluation Technical data Article number: 6773927 Manufacturer SKU: TUN6773927 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: RNMG150600-61 Size: 15 mm Thickness: 6.35 mm Clearance angle: 0° Hole: cylindrical Chipbreaker: 61 Design and features CVD-coated cemented carbide (T9215) Round insert form For external and internal turning Compatible with ISO holders SKU: 6773927-Tungaloy FAQ Which applications suit this turning insert? The RNMG150600-61 T9215 insert by Tungaloy is optimised for external and internal turning operations on medium-strength steels, delivering consistent performance in continuous and slightly interrupted cuts. Which materials can be machined with this grade? The T9215 grade is intended as a first choice for medium steel machining; it combines wear resistance and breakage safety for productive steel turning. How does the T9215 coating improve performance? The CVD coating on the cemented carbide substrate increases abrasion resistance and helps maintain edge integrity, which translates into extended tool life and stable surface quality under typical turning conditions. How can compatibility with an existing holder be ensured? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; when a holder matches the RNMG150600-61 parameters and accommodates a cylindrical hole, stable clamping and improved machining stability follow. What are the key dimensions and identifying codes? Designation RNMG150600-61, size 15 mm, thickness 6.35 mm, clearance 0°, chipbreaker 61; manufacturer article number 6773927 and SKU TUN6773927 identify the exact item. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com