RPMT 1606EN AH130 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide wear resistance and the 11° clearance for reliable, sharp-edge milling performance; order directly via Metav Werkzeuge or consult our specialists for compatibility and application advice. RPMT 1606EN AH130 indexable insert for milling — PVD-coated carbide, round 16 mm (Tungaloy) RPMT1606EN AH130 is a round indexable insert designed for Tungaloy milling systems, providing wear- and chipping-resistant cutting edges for face, shoulder, slot and high-feed milling operations. PVD-coated carbide grade AH130 Round 16 mm insert, 6.35 mm thick 11° clearance angle for secure cutting Cylindrical hole with one-sided countersink Longer tool life through PVD-coated carbide and edge stability The insert is made from PVD-coated carbide in grade AH130, a combination that offers enhanced wear resistance and improved resistance to edge chipping. The PVD layer reduces adhesive wear and thermal degradation at the cutting zone, which in turn extends tool life and stabilises machining processes. For manufacturers requiring consistent component quality in medium- to high-speed milling, this construction means fewer index changes and more predictable cycle times. Compatibility and secure clamping for predictable results Designed as part of a system, the insert requires a matching seat, geometry and cutter body within Tungaloy milling families; correct pairing ensures secure clamping and repeatable positioning. The insert’s cylindrical hole with a one-sided countersink (40°–60°) and single-sided chipbreaker support stable fixation and controlled chip formation. The 11° clearance angle aids in reducing rubbing on the flank face, maintaining a sharp cutting edge and lowering cutting forces during contour and shoulder operations. Practical benefits for productivity and process security As a tool element for general milling, the round 16 mm form and 6.35 mm thickness deliver a balance between rigidity and accessibility in pocket and profile work. The single-sided chipbreaker promotes predictable chip flow and easier evacuation in a range of materials, which contributes to consistent surface finish and reduced downtime. When integrated into a coherent toolset, these inserts help increase throughput and simplify inventory by offering a robust, versatile solution for varied milling tasks. Contact Metav Werkzeuge for application advice and to confirm compatibility with Tungaloy milling systems; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6987878 Manufacturer SKU: TUN6987878 SKU: 6987878-Tungaloy Model series: Fräswendeschneidplatten Label: RPMT1606EN AH130 Tungaloy-Wendeplatte Numbers / Core technical data Insert size: 16 mm Thickness: 6.35 mm Clearance angle: 11° ISO designation: 1606EN Designs / Special features PVD-coated carbide grade AH130 Round insert form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Suitable for face, shoulder, slot, high-feed and contour milling depending on tool family System composition: milling body, indexable insert, clamping screw, optional shim FAQ What materials is this insert suitable for? The RPMT1606EN AH130 insert is formulated for general milling and offers good wear resistance across a broad material range; the AH130 grade is particularly geared towards applications requiring a stable, sharp cutting edge. How does the PVD coating affect performance? A PVD coating on the carbide substrate improves thermal stability and reduces adhesive wear, so the insert maintains cutting geometry longer and provides consistent results in extended runs. Does the insert fit all Tungaloy milling bodies? Compatibility requires that the insert seat, geometry and milling body are technically matched; the RPMT1606EN must be used with corresponding Tungaloy clamping systems designed for this ISO designation. What is the benefit of the one-sided chipbreaker? The single-sided chipbreaker promotes controlled chip formation and evacuation, which supports surface finish quality and reduces the risk of recutting chips in pocket and profile machining. How is the insert clamped and located? Clamping is achieved via a clamping screw and the cylindrical hole with a one-sided countersink ensures secure and repeatable seating within the cutter body. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RPMT 1606EN AH4035 Wendeplatten - Tungaloy
The combination of a PVD‑coated AH4035 grade and a precise round 16 mm form delivers dependable wear resistance and a consistently sharp cutting edge, promoting process security and predictable tool life. Order the RPMT1606EN AH4035 indexable insert directly via Metav Werkzeuge or consult the team for application-specific advice. RPMT1606EN AH4035 RPMT indexable milling insert for milling operations (Tungaloy) The RPMT1606EN AH4035 is a round indexable insert engineered for face, shoulder, slot and high‑feed milling in compatible Tungaloy milling systems. PVD-coated AH4035 grade Round 16 mm insert form 6.35 mm plate thickness Cylindrical hole with countersink Durable coating and material for longer tool life The PVD‑coated AH4035 specification combines a wear‑resistant carbide substrate with a modern coating that maintains a sharp cutting edge under milling loads. This combination increases resistance to flank wear and minimises micro‑chipping, which contributes to process security and longer periods between indexings. For operations where a stable edge and consistent surface finish are critical, the coated grade supports sustained productivity while keeping maintenance intervals predictable. Secure seating and easy mounting reduce setup time Designed as a round 16 mm indexable insert with a 6.35 mm plate thickness and a cylindrical hole, the geometry ensures reliable seating in matching Tungaloy cutter bodies. The single-side countersink (40°–60°) provides secure clamping and repeatable positioning, which helps avoid displacement during high feeds or interrupted cuts. Correct matching of insert seat, geometry and cutter body is essential for safe operation and to fully exploit the insert’s mechanical advantages. Targeted chip control and broad application range The insert features a single-sided chipbreaker, optimised for a range of milling tasks from face and contour milling to high-feed milling, delivering consistent chip formation and evacuation. This targeted chip control reduces the risk of built-up edge and improves surface integrity on the workpiece. As a result, cycle times can be maintained or reduced while achieving reliable dimensional and surface quality in typical milling applications. Practical benefits for production environments Using this insert in a compatible milling system supports predictable tool life and operational stability, which in turn lowers unplanned downtime and simplifies tool planning. The designation and geometric details allow easy integration into tool management systems and spare part lists, helping to streamline procurement and stockkeeping for production and maintenance teams. If clarification is required on seat compatibility or cutting data, technical advice is available to ensure the insert matches the intended cutter body and process parameters. For reliable, high‑performance milling with the PVD‑coated AH4035 grade, contact Metav Werkzeuge for ordering or technical consultation: info@metav-werkzeuge.com | +49 2822 7131930 — the team can advise on cutter compatibility and application settings for Tungaloy RPMT1606EN inserts Technical data Article number: 6987876 SKU: 6987876-Tungaloy Manufacturer article number: TUN6987876 Model series: Milling indexable inserts Material: Carbide Coating: PVD Numbers / Core data Plate size: 16 mm Plate thickness: 6.35 mm Free cutting angle: 11° Geometry designation: 1606EN Angle: 0° Design / Special features Round plate form Cylindrical hole with single-side countersink (40°–60°) Single-sided chipbreaker Grade AH4035 For milling applications FAQ What applications is this insert suited for? This RPMT1606EN AH4035 indexable insert is intended for face, shoulder, slot, high‑feed and contour milling within compatible Tungaloy milling systems. How does the AH4035 grade affect performance? The AH4035 PVD‑coated grade on the RPMT1606EN provides improved wear resistance and process security, helping to maintain a sharp cutting edge under typical milling loads. What is the significance of the cylindrical hole and countersink? The cylindrical hole with a single‑side countersink on the RPMT1606EN ensures repeatable seating and secure clamping in the cutter body, reducing the risk of insert displacement during heavy or interrupted cuts. Which cutter bodies are compatible with this insert form? Compatibility requires a cutter body with a matching round insert seat and the correct clamping geometry; the RPMT1606EN must be used only in Tungaloy‑compatible milling bodies with corresponding seat and clamp design. Does this insert support high-feed milling? Yes, the geometry and chip control features make the RPMT1606EN AH4035 suitable for high‑feed milling as well as conventional face and contour milling. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RPMT 1606EN AH4035 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide grade AH4035 and a precise 11° clearance, delivering wear resistance and stable cutting edges for reliable milling. Order the RPMT1606EN AH4035 inserts directly via Metav Werkzeuge or consult our specialists for technical matching and rapid supply. RPMT 1606EN AH4035 RPMT indexable insert for milling – Tungaloy A RPMT1606EN AH4035 indexable insert designed for Tungaloy milling systems, optimised for face, shoulder, slot, high‑feed and contour milling where process security and a sharp cutting edge are required PVD-coated carbide AH4035 for high wear resistance 11° clearance for precise chip formation Round insert size 16 mm, thickness 6.35 mm Cylindrical hole with 40°–60° countersink Single-sided chipbreaker for controlled chips Consistent machining through a wear-resistant grade The combination of PVD coating and the AH4035 carbide formulation offers a balance of wear resistance and edge toughness that supports long tool life and steady component quality. This engineered material pairing reduces flank wear and resists edge chipping under interrupted cuts, which translates into fewer index changes and lower overall machining costs. The PVD-coated surface also improves heat resistance at the cutting zone, so cycle times remain stable even at higher cutting speeds, delivering a measurable productivity gain across batch and single‑piece production. Precise geometry for secure clamping and repeatable results This round insert features a 16 mm diameter and 6.35 mm thickness, with a cylindrical hole and a one‑sided countersink (40°–60°) that ensures consistent seating and clamping in compatible cutter bodies. The 11° clearance angle provides the necessary relief for controlled cutting action while the round form allows multiple indexing positions for economical use of the cutting edge. Note that insert seat, geometry and the milling body must be technically matched within the Tungaloy system to achieve the intended accuracy and repeatability. Optimised chip control and versatile milling operations Equipped with a single-sided chipbreaker, the insert promotes predictable chip segmentation and evacuation, improving surface finish and reducing risk of recutting. The geometry is suitable for a range of operations — face, shoulder, slot, high‑feed and contour milling — depending on the assigned cutter family. For applications requiring a sharp edge and high process security, this insert provides a reliable compromise between edge life and surface integrity, making it suitable for both batch production and precision finishing tasks. Practical guidance for selection and setup When integrating these inserts, consider the cutter family and the required feed per tooth to exploit the chipbreaker geometry fully. Correct seat alignment and torque on the clamp screw are essential to prevent fretting and ensure consistent tool life; use the designated shim if supplied. For difficult materials or interrupted cuts, the AH4035 grade helps maintain edge integrity, while the PVD surface aids thermal stability. If finer surface quality or different chip characteristics are required, consult tool selection charts to compare alternative grades and geometries. For detailed compatibility checks or to secure the RPMT1606EN AH4035 insert for a specific Tungaloy milling body, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored advice and rapid delivery. Technical data Article number: 6987879 Manufacturer SKU: TUN6987879 Stock SKU: 6987879-Tungaloy Material: Carbide Series: Fräswendeschneidplatten Designation: RPMT1606EN Facts Insert size: 16 mm Plate thickness: 6.35 mm Clearance angle: 11° Hole style: cylindrical hole + 40°–60° countersink Form: round Special features PVD-coated carbide AH4035 Single-sided chipbreaker With hole for secure clamping Suitable for face, shoulder, slot, high-feed and contour milling (depending on cutter family) Compatible with Tungaloy milling systems; insert seat and geometry must match FAQ What materials is this insert suitable for? The RPMT1606EN AH4035 insert is a PVD-coated carbide designed primarily for reliable performance in a broad range of milling tasks; compatibility with specific materials depends on cutter configuration and cutting data. How does the AH4035 grade affect tool life? The AH4035 grade provides a wear‑resistant and fracture‑tough combination that extends edge life under conventional and higher cutting speeds, reducing the need for frequent indexing. Is the insert compatible with all Tungaloy milling bodies? Compatibility requires that the insert seat, geometry and milling body are technically matched; the RPMT1606EN designation and hole/countersink form must correspond to the cutter family for secure clamping. What benefit does the 11° clearance deliver? An 11° clearance balances relief and edge support, promoting stable cutting action, consistent chip formation and improved surface finish in many milling applications. Can the chipbreaker handle heavy interrupted cuts? The single‑sided chipbreaker is optimised for controlled chips and improved evacuation; for heavy interruptions, verify cutter rigidity and cutting parameters to ensure process security. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RPMT 1606EN AH725 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that combines fracture resistance and wide material suitability with a compact, round design and secure clamping features; the result is predictable milling performance and reduced process interruptions. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. RPMT1606EN AH725 RPMT indexable insert for milling — Tungaloy A RPMT1606EN AH725 Tungaloy indexable insert engineered for versatile milling tasks, offering a universal, fracture‑resistant grade for steel and stainless steels in compatible Tungaloy milling systems. PVD-coated carbide AH725 for steel & stainless steels One-sided chipbreaker for reliable chip control Round 16 mm insert, 6.35 mm thickness Cylindrical hole with single-side countersink (40°–60°) Consistent process security from the PVD-coated grade The AH725 grade is a PVD-coated carbide developed for universal use where process reliability is paramount. Its composition and coating deliver stable cutting behaviour when machining steel and stainless steels, reducing the risk of unexpected insert failure. For production environments with frequent material changes or smaller tool diameters, this fracture‑resistant grade helps maintain cycle times and limit unscheduled tool changes, supporting a steady workflow and predictable tool life. Secure seating and geometry for accurate milling forces The radial geometry — a round 16 mm form with 6.35 mm thickness and 11° relief — ensures even load distribution in compatible milling bodies. The insert's cylindrical hole with a single-side countersink (40°–60°) enables positive clamping and precise seating; matching the insert seat and tool body geometry is essential for repeatable results. Where rigidity and clamping integrity matter, this insert design reduces vibration and supports consistent surface finish across face, shoulder and contour milling operations. Chip control and application scope for efficient removal Equipped with a one-sided chipbreaker, the insert promotes effective chip formation and evacuation, particularly useful in mixed operations such as face, shoulder, slot, high‑feed and contour milling depending on the assigned tool family. The chipbreaker geometry is tuned to control chip size and flow, lowering the chance of re-cutting and improving tool life. Integration into Tungaloy milling systems is straightforward provided the tool body and insert seat conform to the same technical specifications. For tailored recommendations or to secure original Tungaloy RPMT1606EN AH725 inserts for your milling applications, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — specialists are available to advise on tool matching and stocking. Technical data Article number: 6987880 Manufacturer SKU: TUN6987880 Model series: Fräswendeschneidplatten Core specifications Insert designation: RPMT1606EN (1606EN) Shape: round, Ø 16 mm Thickness: 6.35 mm Relief angle: 11° Hole: with cylindrical hole + single-side countersink (40°–60°) Materials & special features Material: carbide Coating: PVD Grade: AH725 (universal, fracture-resistant) Chipbreaker: one-sided Typical application: milling — face, shoulder, slot, high-feed, contour (depending on tool family) Compatibility: for use in Tungaloy milling systems — insert seat and geometry must match milling body FAQ What materials is this insert suitable for? The RPMT1606EN AH725 insert is specified for machining steel and stainless steels, the AH725 grade providing universal, fracture‑resistant performance. Which milling operations suit this insert best? The insert is designed for a range of milling operations — face, shoulder, slot, high‑feed and contour milling — depending on the chosen milling body and tool family. How does the chipbreaker benefit production? The one‑sided chipbreaker promotes controlled chip formation and evacuation, which improves machining consistency and reduces the likelihood of re‑cutting, supporting longer tool life. What clamping features ensure secure seating? Secure seating is achieved via the cylindrical hole with a single‑side countersink (40°–60°) combined with the round geometry and the specified relief angle; correct matching of insert and milling body is critical. Is this an original Tungaloy article and how is it identified? Yes — the product is listed as the original Tungaloy insert, article number 6987880 with manufacturer SKU TUN6987880. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
RPMT 1606EN AH725 Wendeplatten - Tungaloy
Benefit from a combination of universal, PVD-coated AH725 carbide for reliable performance in steel and stainless steels, a one-sided chipbreaker for controlled chip formation, and standard RPMT geometry for secure mounting in compatible milling bodies — order directly via Metav Werkzeuge or consult the technical team for precise selection. RPMT1606EN AH725 indexable milling insert (PVD-coated carbide) by Tungaloy The RPMT1606EN AH725 is an indexable milling insert designed for universal milling tasks where process security and consistent chip control are required. PVD-coated AH725 for mixed materials One-sided chipbreaker for secure chip control Round 16 mm form, 6.35 mm thickness Cylindrical hole with 40°–60° countersink High, consistent productivity through optimised cutting grade The PVD-coated cutting grade AH725 is engineered as a universal, breakage-resistant solution for machining steel and stainless steels, delivering stable chip formation and reduced risk of built-up edge. In practical terms, the use of this grade leads to fewer unexpected tool changes and steadier surface quality in serial production. The insert’s design supports reliable wear progression, which helps maintain machining parameters over longer runs and improves overall process security for mixed-material batches. Secure clamping and repeatable seating for reliable machining Compatibility of insert seat, geometry and cutter body is essential for safe operation; the round insert in 16 mm form with a 6.35 mm plate thickness and a cylindrical hole plus one-sided countersink (40°–60°) enables precise alignment and firm clamping. The 11° relief angle supports efficient cutting without compromising edge support. These features together ensure repeatable positioning and allow higher feed rates in appropriate tool families, reducing vibration and protecting the cutter body during demanding face, shoulder or contour operations. Versatile application scope with focused chip control Designed for a range of milling operations — from face and shoulder milling to slotting, high-feed and contour tasks depending on the assigned tool family — the insert’s one-sided chipbreaker is optimised for reliable chip evacuation in interrupted and continuous cuts. The combination of geometry and AH725 substrate provides a balance between toughness and wear resistance, making the insert a practical choice where tool inventory consolidation and process stability are priorities. The RPMT1606EN AH725 insert therefore supports consistent results across varied milling requirements without frequent retooling. Contact Metav Werkzeuge for application advice on Tungaloy RPMT1606EN AH725 inserts and tailored selection for specific milling operations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6987877 Manufacturer SKU: TUN6987877 Metav SKU: 6987877-Tungaloy Model series: Fräswendeschneidplatten Shape: round Facts Insert size: 16 mm Plate thickness: 6.35 mm Relief angle: 11° ISO designation: 1606EN Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Material: hardmetal (carbide) Coating/type: PVD-coated carbide, grade AH725 Chipbreaker: one-sided Application: milling (face, shoulder, slot, high-feed, contour depending on tool family) Compatibility: for use in Tungaloy milling systems — insert seat and cutter body must match FAQ Is the RPMT1606EN AH725 suitable for stainless steels? The RPMT1606EN AH725 insert is specified for steel and stainless steels; the AH725 PVD-coated grade offers resistance to built-up edge and stable chip formation in such materials. Which milling tasks are recommended for this insert? Typical applications include face, shoulder, slot, high-feed and contour milling, depending on the assigned milling body and tool family that accept the RPMT1606EN geometry. What clamping geometry is required for correct use? Correct use requires a milling body with a matching seat for the RPMT1606EN round form, ensuring the cylindrical hole and 40°–60° countersink align with the cutter’s clamping screw and support pad. How does the AH725 grade affect tool life and process security? The AH725 grade combines toughness and wear resistance to provide stable chip formation and a reduced risk of insert breakage, which enhances process security and contributes to more predictable tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCLC L2020K Wendeplatten - Tungaloy
Reliable carbide performance with ISO compatibility and a 7° relief angle for versatile turning tasks. Benefit from the square form and the cylindrical hole with double countersink for dependable clamping; order the SCLCL2020K insert directly via Metav Werkzeuge or ask our consultants if needed. SCLC L2020K ISO turning insert, square form, 7° relief – Tungaloy A SCLC L2020K indexable insert designed for ISO-standard external and internal turning, offering a robust cemented-carbide cutting edge for general-purpose machining. SCLC L2020K ISO turning insert, square form Solid carbide grade for stable edge life 7° relief angle for general-purpose turning Cylindrical hole with double countersink 70°–90° Increased productivity through consistent wear resistance The cemented carbide construction of this indexable plate provides a stable cutting edge that supports continuous production runs. A reduced need for frequent regrinding or replacement translates into higher machine uptime and lower tooling costs per part. The moderate 7° relief angle balances cutting forces and tool strength, enabling efficient chip formation in a wide range of turning tasks while maintaining dimensional stability of the workpiece. This results in more predictable cycle times and improved process reliability for series production. Secure clamping and ISO-aligned compatibility for reliable set-up Built to ISO conventions, the insert’s square insert geometry and the cylindrical hole with double countersink (70°–90°) ensure precise seating and positive clamping in compatible holders. Compatibility is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness, so selection should align with the chosen holder and fixture system. The central hole and countersink design improve torque distribution during tightening and reduce micro-movement under cutting loads, helping to sustain surface finish and repeatability across batches. Practical selection and system integration for turning applications The plate is supplied in size L2 with a 2.38 mm thickness, making it suited to both external and internal turning when combined with the correct holder or boring bar. Because this insert is supplied without a chipbreaker, the chip control and cutting parameters should be chosen according to the workpiece material, machining mode and machine/tool stability. The typical system setup includes the insert, a matching outer holder or boring bar, a shim/clamping set and spare fixing screws — a configuration that allows rapid insert changes and straightforward tooling standardisation across machines. For procurement or technical advice on Tungaloy SCLCL2020K inserts, contact Metav Werkzeuge for personalised selection and availability information — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6806115-Tungaloy Manufacturer SKU: TUN6806115 Model series: ISO turning indexable inserts Designation: SCLCL2020K Core specifications Relief angle: 7° Included angle: 90° Thickness: 2.38 mm Size: L2 Hole: with hole Hole style: cylindrical hole + double countersink (70°–90°) Shape: square Chipbreaker: none Features & system Material: cemented carbide Application: turning (external and internal) System components: insert, outer holder or boring bar, shim/clamping set, spare screws Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness FAQ Is the insert compatible with standard ISO turning holders? Compatibility follows ISO form and size rules; the SCLCL2020K insert from Tungaloy fits holders designed for square L2 inserts when form, relief angle, tolerance class, fastening and thickness match. What is the relief angle and why is it important? The SCLCL2020K has a 7° relief angle, which reduces rubbing at the flank and supports a balance between cutting edge strength and cutting efficiency for general-purpose turning. What material is the insert made from? This Tungaloy indexable plate is manufactured from cemented carbide, chosen for wear resistance and sustained cutting performance in serial machining operations. Does this insert include a chipbreaker? The plate is supplied without a chipbreaker; chip control should be achieved through the choice of cutting data, tool geometry and, if required, a different insert grade or chipformer. What are the size and thickness specifications? The insert is size L2 with a thickness of 2.38 mm and an included angle of 90°, suitable for a wide range of turning set-ups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCLC R2020K Wendeplatten - Tungaloy
Take advantage of the ISO-standard square geometry and robust carbide construction for consistent turning performance; the combination of a 7° clearance angle and a 2.38 mm plate thickness ensures mechanical stability and predictable mounting in compatible holders. Order the SCLCR2020K Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. SCLCR2020K Tungaloy turning insert — SCLC R2020K square ISO turning insert for turning The SCLCR2020K Tungaloy turning insert is a square, ISO-standard indexable insert designed for both external and internal turning applications, with compatibility governed by form, clearance angle, tolerance class, fastening, size and thickness. ISO-standard square insert 90° geometry Carbide body for high tool life 7° clearance angle for versatile cutting Cylindrical hole and double countersink (70°–90°) Reliable fit and consistent cutting performance The square, ISO-standard geometry with a 90° approach provides a stable cutting orientation that simplifies toolholder selection and repeatable set-up. Compatibility with the holder depends on matching form, 7° clearance, tolerance class, fastening method, size and 2.38 mm thickness, so correct pairing reduces runout and vibration. This technical conformity translates into fewer interruptions during production and a predictable machining window for turning operations. Built for durability and repeatable results Manufactured from carbide, the insert is intended for robust performance and improved tool life in routine turning tasks. The plate’s 2.38 mm thickness contributes to rigidity at the cutting edge, while the designation R2 indicates the plate’s corner radius classification for controlled engagement. Together these factors support steady material removal and dimensional stability, helping to maintain surface quality across multiple insert changes. Practical mounting and replacement features to save time The insert is supplied with a cylindrical hole and a double countersink (70°–90°) to match a wide range of clamping systems; this allows secure fastening and straightforward indexability. Note that this variant is supplied without a chipbreaker, so selection of a grade or an alternative geometry with integrated chip control should be based on the workpiece material and cutting strategy. The ISO-series design also means replacement is part of a system: indexable insert, matching holder or boring bar, underlay/locking set and replacement screws. Where and how it is best applied Designed for external and internal turning, the insert fits into ISO-compliant tool systems and is suitable when a square, 90° geometry is required. Selection of the correct grade and, where relevant, a chipbreaker or alternative insert type will determine performance on different workpiece materials. For applications requiring predictable mounting and a stable cutting edge, this insert offers a practical choice that supports productive turning workflows. For tailored application advice on Tungaloy inserts and to secure the SCLCR2020K through Metav Werkzeuge, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical support and availability. Technical Data Article number: 6806119 Manufacturer SKU: TUN6806119 SKU: 6806119-Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Geometry: square, 90° Thickness: 2.38 mm Clearance angle: 7° Plate size / designation: R2 Hole style: cylindrical hole + double countersink (70°–90°) Features & compatibility Material: carbide Application: turning (external and internal) Delivered: ISO turning insert (system requires holder, underlay/locking set and screws) Chipbreaker: none Compatibility criteria: form, clearance, tolerance class, fastening, size, thickness FAQ What holders are compatible with this insert? Compatibility requires a holder that matches the insert’s form, 7° clearance, tolerance class, fastening method, size and 2.38 mm thickness; use ISO-standard holders designed for square inserts. Is there a chipbreaker on this insert? This variant is supplied without a chipbreaker; choose an alternative grade or geometry with integrated chip control when chip formation must be managed. Which operations is the insert intended for? The insert is intended for external and internal turning within ISO-compliant tool systems where a square, 90° geometry is required. How does the mounting hole benefit set-up? The cylindrical hole combined with a double countersink (70°–90°) ensures secure clamping in a variety of ISO-compatible toolholders and facilitates rapid, repeatable indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 070204 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade solution that combines high surface quality, low cutting forces and precise geometry for consistent results in turning applications. Order directly via Metav Werkzeuge or consult the team for application-specific guidance. SCMT 070204 NS9530 Tungaloy turning insert — finishing grade, uncoated cermet The SCMT070204-24 NS9530 is an ISO‑indexable turning insert for finishing of steel, designed for external and internal turning where a sharp cutting edge and low cutting forces are required. ISO-indexable square insert 07 size Uncoated cermet for high surface finish 0.4 mm corner radius for precise finishing Cylindrical hole with single-sided countersink Achieve consistently superior surface finish with a finishing cermet This insert uses an uncoated cermet grade NS9530, optimised for finishing operations on steel. The material combines ceramic hardness with metallic toughness, which gives a sharp cutting edge and reduced adhesion tendency; the outcome is a high surface finish with low cutting forces under continuous cutting and small depths of cut. For process planners this means lower spindle loads and more predictable part quality when a smooth finish is the key criterion. Secure mounting and ISO compatibility for predictable tool changeovers The insert is ISO-indexable in a square form with size 07 and an insert thickness of 2.38 mm, ensuring compatibility with standard clamping systems when the holder matches the form, 7° clearance angle, tolerance class, fastening method, size and thickness. The centre hole is cylindrical with a single-sided countersink (40°–60°) to ensure reliable seating and repeatable indexing. Specifying holders and clamp sets that match these geometric parameters shortens setup time and reduces variability across tool changes. Small corner radius and geometry tailored for finishing efficiency A 0.4 mm corner radius provides the balance between edge strength and fine contour definition, making the insert suitable for fine passes and detail work. The geometry, together with the finishing grade, supports continuous cuts and modest depths of cut where surface quality and dimensional control are priorities. Choosing the matching chipbreaker and the 24 chipbreaker variant allows for controlled chip formation when machining stable setups; the overall package improves process stability and contributes to predictable tool life and part consistency. For high‑quality finishing with Tungaloy NS9530 inserts, contact Metav Werkzeuge for tailored advice or to request an order: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6998497 SKU: 6998497-Tungaloy Manufacturer article number: 6998497 Manufacturer SKU: TUN6998497 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Designation: SCMT070204-24 Size: 07 Corner radius: 0.4 mm Thickness: 2.38 mm Clearance angle: 7° Insert shape angle: 90° Chipbreaker: 24 Special features Grade: NS9530 (uncoated cermet) Material: carbide Hole: cylindrical hole + single-sided countersink (40°–60°) Typical application: external and internal turning System composition: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws Suitability: finishing of steel, continuous cuts, small depths of cut FAQ Is this insert suitable for finishing steel? The SCMT070204-24 NS9530 Tungaloy insert is a finishing grade developed for steel; its uncoated cermet NS9530 provides a sharp edge and low cutting forces for superior surface quality. Which toolholders fit this insert? Compatibility depends on the holder matching the square form, 7° clearance angle, tolerance class, fastening method, size (07) and thickness (2.38 mm); selecting holders designed for ISO‑indexable SCMT inserts ensures secure mounting. What is the hole and countersink configuration? The insert has a cylindrical hole with a single‑sided countersink (40°–60°), which provides stable seating and repeatable indexing in standard clamp systems. For which cutting conditions is this grade recommended? This finishing grade is intended for continuous cutting and small depths of cut, where low cutting forces and a fine surface finish are required. How does the corner radius affect the finish? A 0.4 mm corner radius offers a balance between edge strength and fine contouring, promoting precise finishes and controlled contact stress on the workpiece. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 070204 T9225 Wendeplatten - Tungaloy
Take advantage of the robust T9225 grade and the ISO 90° geometry combined with a CVD-coated carbide substrate for steady chip control and extended tool life; order the SCMT070204-24 T9225 turning insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. SCMT 070204 T9225 Tungaloy turning insert — CVD-coated carbide, 90° geometry The SCMT070204-24 T9225 is an ISO-standard turning indexable insert engineered for external and internal turning in medium to heavy steel applications, offering a balance of toughness and wear resistance. CVD-coated carbide grade T9225 Robust for medium to heavy steel turning ISO-compatible 90° geometry 0.4 mm corner radius for strength Stable cutting in variable engagement for predictable output The SCMT070204-24 insert combines a CVD-coated carbide substrate with the T9225 grade to provide increased toughness where cut depth and engagement fluctuate. This formulation supports interrupted cuts and slightly unstable machining conditions, leading to consistent chip formation and reduced edge chipping. For production environments where tool life and process stability matter, the enhanced fracture resistance translates into fewer tool changes and more predictable cycle times, supporting efficient output planning. Precision seating and geometry that reduce setup variability Manufactured to ISO standards, the square SCMT form and the 90° lead angle ensure repeatable seating in compatible holders. The insert’s 7° relief and a nominal thickness of 2.38 mm mean the component mates reliably with standard clamp sets and screws, minimising runout and vibration when assembled correctly. The central hole—specified as a cylindrical hole with a single-sided countersink (40°–60°)—facilitates secure clamping and accurate positioning. These geometric constants reduce setup variability and support tighter process control on the shop floor. Improved tool life and productivity through focused edge design A 0.4 mm corner radius increases edge strength and distributes cutting forces, which helps to avoid premature wear during roughing passes while still permitting acceptable surface finish in subsequent passes. The T9225 coating improves thermal stability and abrasive resistance, extending usable life in steel operations. The selection of chipbreaker 24 for this insert provides controlled chip breaking tailored to turning tasks, reducing rework and downtime. Collectively, these features favour a lower overall cost per component through extended tool intervals and fewer interruptions. System compatibility and practical workshop integration This indexable insert is part of an ISO-series system: the plate works with matching external holders or boring bars, plus the necessary backing pads, clamp sets and replacement screws to complete an assembly. The insert is intended primarily for turning; choose the chipbreaker and grade to suit material and cutting conditions. For workshops integrating new tooling, the standardised form factor simplifies inventory and replacement procedures, enabling rapid swaps and minimal retraining of operators while maintaining process continuity. For tailored machining recommendations or to secure the SCMT070204-24 T9225 turning inserts from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for specialist guidance and prompt supply Technical data Article number: 6781105-Tungaloy Manufacturer article number: 6781105 Manufacturer SKU: TUN6781105 Model series: ISO-Drehwendeschneidplatten Designation: SCMT070204-24 Facts Corner radius: 0.4 mm Relief angle: 7° Insert size: 07 Thickness: 2.38 mm Geometry angle: 90° Chipbreaker: 24 Special features Grade: T9225 (CVD-coated) Material: carbide Application: turning; external and internal turning Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Compatible with ISO holders and clamping sets FAQ What materials is this insert suitable for? The SCMT070204-24 T9225 insert from Tungaloy is designed primarily for medium to heavy steel turning, providing toughness and wear resistance suited to variable engagement conditions. Which holder types are compatible with this insert? Compatibility is defined by ISO form and dimensions; the SCMT form and 90° geometry fit standard ISO external holders and boring bars when the holder matches form, relief angle and tolerance class. What does the T9225 grade mean for performance? T9225 denotes a CVD-coated carbide grade optimised for toughness and thermal stability, making it suitable for interrupted cuts and applications requiring reliable edge life. How does the 0.4 mm corner radius influence machining results? A 0.4 mm radius increases edge robustness and load distribution, improving resistance to chipping during roughing and contributing to stable surface finish during finishing passes. Is the insert supplied with screws and clamp sets? The insert is a component of an ISO system that also uses backing pads, clamp sets and replacement screws; these items are typically procured to match the chosen holder and clamping arrangement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing, low cutting forces and ISO compatibility to secure consistent surface quality and predictable tool life; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. SCMT 09T302 NS9530 ISO turning insert (finishing) — Tungaloy SCMT09T302 NS9530 is an ISO-format indexable turning insert designed for finishing operations on steel, offering an uncoated cermet grade for low cutting forces and high surface quality. ISO insert SCMT09T302 for precision finishing Uncoated cermet NS9530 for superior surface finish 7° clearance angle, 0.2 mm corner radius Cylindrical hole with one-sided countersink Outstanding surface finish from a finishing-grade cermet This indexable insert is built around the NS9530 cermet grade to deliver a consistently fine surface on steels during continuous cuts and small depth passes. The geometry produces reduced cutting forces and a sharp cutting edge that limits material pull-out, so the resulting finish is improved without aggressive cutting parameters. The insert’s 0.2 mm corner radius supports delicate profiling and fine finishes while maintaining dimensional control. Reliable fit and proven ISO compatibility for production use Shaped to the ISO profile SCMT with the designation 09T302, the insert is compatible with holders that match in form, clearance angle, tolerance class, attachment, size and thickness. The presence of a cylindrical hole with one-sided countersink (40°–60°) ensures secure clamping and repeatable seating. The plate thickness of 3.97 mm and square format maintain stability during external and internal turning, allowing for predictable chip formation and consistent results in series production. Durable substrate and controlled chipbreaking for efficient turning The cutting geometry features a single-sided chipbreaker, optimised for finishing cuts in steel and matched to the uncoated cermet grade to avoid build-up and thermal softening. The insert is produced on a carbide substrate, combining rigidity with edge strength to support long-standing performance in continuous operations. For machining strategies, select feed and depth values aligned with finishing tasks to exploit the grade’s low cutting-force behaviour and achieve the targeted surface quality. For application-tailored recommendations and immediate availability of Tungaloy finishing inserts, contact Metav Werkzeuge for precise mounting advice and order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998621 SKU: 6998621-Tungaloy Manufacturer SKU: TUN6998621 Model series: ISO-Drehwendeschneidplatten Application: Turning Material: Hartmetall Cutting material type: uncoated Cermet (NS9530) Facts ISO designation: SCMT09T302 Size: 09 Thickness: 3.97 mm Clearance angle: 7° Included corner radius: 0.2 mm Insert angle: 90° Special features Plate shape: square Chipbreaker: one-sided Mounting hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Grade: NS9530 Typical use: external and internal finishing cuts FAQ Which materials is this insert suited for? The SCMT09T302 NS9530 Tungaloy insert is specified as a finishing grade for steel and is optimised for continuous cuts and small depths to achieve high surface quality. How does the 0.2 mm corner radius affect the machining result? A 0.2 mm radius provides a fine edge geometry that improves surface finish and supports accurate profile details while limiting deflection during finishing operations with the Tungaloy insert. Is the insert compatible with standard holders? Compatibility is determined by matching the ISO form, clearance angle, tolerance class, attachment method, size and thickness; the SCMT09T302 follows ISO standards to ensure broad holder compatibility. What is the purpose of the cylindrical hole with countersink? The cylindrical hole with one-sided countersink ensures secure and repeatable clamping, improving seating stability and facilitating reliable indexation during production. Can this insert be used for roughing operations? This cermet grade NS9530 and the insert geometry are optimised for finishing; for heavy roughing cuts, a grade and chipbreaker designed for higher depths of cut and interrupted cuts should be chosen. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T302 NS9530 Wendeplatten - Tungaloy
Combine high-surface finishing, low cutting forces and ISO compatibility for consistent turning results; order the insert directly via Metav Werkzeuge or consult our advisors for application support. SCMT09T302 NS9530 ISO turning insert for finishing steels — Tungaloy SCMT09T302 NS9530 is an ISO-format indexable turning insert designed for finishing operations on steel, offering a sharp edge geometry and an uncoated cermet grade optimised for continuous cuts and fine surface quality. Precision finishing grade NS9530 Sharp cutting edge with low cutting forces Square ISO 09 form, 0.2 mm corner radius Cylindrical hole with one-sided countersink Exceptional surface quality for finishing turns The uncoated cermet grade NS9530 delivers a sharp cutting edge that reduces cutting forces and promotes superior surface finishes when turning steel. Thanks to the fine microstructure of the cermet, the insert minimises built-up edge formation during continuous cuts and short infeed passes, making it an excellent choice for fine turning and light finishing passes. This combination of material and geometry helps maintain consistent dimensional accuracy and surface integrity on turned components. Secure fit and proven ISO compatibility Designed as an ISO indexable insert in the square ISO 09 format, the insert features a cylindrical hole with a one-sided countersink (40°–60°) and a nominal thickness of 3.97 mm, ensuring secure clamping in compatible external holders or boring bars. Compatibility is governed by form, clearance angle, tolerance class, attachment type, size and thickness; matching these parameters ensures stable clamping, repeatable seating and reliable repeatability across tool changes. The 7° clearance and 90° approach suit conventional holder geometries for general turning setups. Optimised geometry and process advantages With a 0.2 mm corner radius, the cutting edge balances edge strength and surface finish, allowing small depths of cut and continuous cutting regimes without sacrificing productivity. The one-sided chipbreaker supports controlled chip formation for finishing conditions in steel, while the uncoated nature of the insert emphasises sharpness and low cutting resistance rather than coating-enhanced wear resistance—ideal where low cutting forces and top-quality surfaces are the primary objectives. For many finishing tasks, this results in reduced hand-finishing and shorter process chains. Contact Metav Werkzeuge for application advice or availability of Tungaloy finishing inserts; our specialists can recommend the matching holder and cutting parameters — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6998498 SKU: 6998498-Tungaloy Manufacturer SKU: TUN6998498 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Facts Corner radius: 0.2 mm Thickness: 3.97 mm Clearance (relief) angle: 7° Approach/lead angle: 90° ISO designation: 09T302 Size: 09 Special features Uncoated cermet grade NS9530 One-sided chipbreaker Square insert form (quadratic) Cylindrical hole + one-sided countersink (40°–60°) Designed for turning (external and internal) Finishing grade for steel with sharp cutting edge Compatibility depends on holder form, attachment, tolerance and size FAQ What materials is this insert suitable for? The SCMT09T302 NS9530 insert is optimised for steel finishing; the NS9530 cermet is selected for low cutting forces and excellent surface quality in continuous turning operations. Which holder types fit this ISO insert? Compatibility requires a square ISO 09 pocket with matching thickness and attachment; holders and boring bars that accept ISO 09 square inserts with a 3.97 mm thickness and a 90° approach are suitable. How does the 0.2 mm corner radius affect machining? A 0.2 mm corner radius offers a balance between edge strength and surface finish, enabling fine finishing passes with reduced risk of edge chipping during light cuts. Is the insert coated? The SCMT09T302 NS9530 is an uncoated cermet insert, prioritising a sharp edge and low cutting resistance for finishing rather than coating-enhanced wear resistance. What is the purpose of the cylindrical hole and countersink? The cylindrical hole with one-sided countersink (40°–60°) ensures secure clamping and defined seating in compatible indexable insert holders, supporting repeatable tool changes and stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 AH6225 Wendeplatten - Tungaloy
Take advantage of the insert's PVD-coated cemented carbide grade and the square 90° geometry with a 0.4 mm corner radius for stable, repeatable medium turning operations; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and cutting-parameter advice. SCMT 09T304 AH6225 – ISO turning insert, PVD-coated carbide, for turning (Tungaloy) SCMT09T304 AH6225 is an ISO-standard square turning insert designed for external and internal turning applications, optimised for working with stainless steels and medium-precision finishing. PVD-coated cemented carbide AH6225 Optimised for stainless steels Square 90° geometry, 0.4 mm radius Cylindrical hole with 40°–60° countersink Consistent metal‑cutting performance for medium machining The PVD-coated cemented carbide grade AH6225 delivers a balance between a sharp and a stable cutting edge, which is beneficial in mixed production runs and varying stainless materials. The coating increases wear resistance and helps maintain edge integrity under intermittent cutting conditions. Compatibility with ISO holders is determined by the insert's form, clearance angle and thickness, so the insert integrates into established tool systems without requiring special adapters. This results in fewer tool changes and more predictable cycle times in turning operations. Robust geometry and secure clamping for repeatable results The square plate with 90° lead angle and a 0.4 mm corner radius provides an effective compromise between edge strength and surface finish. A 7° clearance angle reduces rubbing and heat build-up at the flank, while the single-sided chipbreaker controls chip formation for typical turning feeds. The cylindrical hole with a one-sided countersink (40°–60°) is made for secure clamping with standard screws and shims; precise fixation reduces vibration and improves surface integrity. The plate thickness of 3.97 mm and ISO size 09 are matched to common external and internal toolholders. Operational advantages that lower total machining cost Using a grade tailored to stainless applications minimises frequent edge failures often caused by built-up edge and work-hardening. The AH6225 grade is designed for steady chip formation and consistent tool life in medium-duty turning, meaning less downtime for insert replacement. Insert compatibility within the ISO system allows rapid replenishment: a matching holder, shim and screw complete the system. Clear technical specifications and repeatable performance support process stability and predictable maintenance planning on the shop floor. Contact Metav Werkzeuge today for availability and tailored recommendations for the Tungaloy SCMT09T304 AH6225 insert; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for holder compatibility and cutting-parameter guidance Technical data Article number: 6829868 Manufacturer SKU: TUN6829868 Label: SCMT09T304 AH6225 Tungaloy‑Wendeplatte Core specifications Angle: 90° Plate thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Size: 09 Features and materials Material: cemented carbide (Hartmetall) Coating: PVD Grade: AH6225 Chipbreaker: single-sided Hole: cylindrical with one-sided countersink (40°–60°) Plate form: square FAQ Is this insert suitable for stainless steels? Yes. The SCMT09T304 AH6225 insert is formulated and coated for turning stainless steels and provides a balance of sharpness and edge stability suitable for medium machining. Which holder features are required for correct fitment? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; the insert fits standard ISO square holders when these parameters match the SCMT09T304 dimensions. What is the purpose of the 0.4 mm corner radius? The 0.4 mm radius increases edge strength compared with a sharp corner, improving resistance to chipping while still allowing satisfactory surface finish in light to medium turning. How does the PVD coating affect tool life? The PVD coating on the AH6225 grade improves wear resistance and helps maintain a stable cutting edge under changing conditions, which generally extends effective tool life compared with uncoated grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 AH6225 Wendeplatten - Tungaloy
Sharp, stable cutting performance combined with a universal PVD-coated carbide grade ensures consistent results in mid-range stainless-steel turning; order the SCMT09T304 insert directly via Metav Werkzeuge or consult our specialists for application advice. SCMT 09T304 AH6225 — ISO turning insert for turning applications, Tungaloy The SCMT09T304 AH6225 is an ISO-standard turning insert designed for external and internal turning, offering a balance of sharpness and edge stability for varying conditions. PVD-coated carbide grade AH6225 Sharp, stable cutting edge for stainless steels 0.4 mm corner radius for controlled engagement Square form with 90° included angle Consistent mid-range performance for stainless-steel turning The combination of a PVD-coated carbide substrate and the AH6225 grade delivers a sharpened, yet durable cutting edge tailored to stainless steel machining. This composition supports reliable chip control and reduces wear during interrupted cuts and variable feeds. By selecting a universal grade optimised for changing conditions, the insert provides reproducible surface finishes and machining times, helping maintain process stability across serial production runs. Geometry and mounting that cut setup time and increase repeatability A square plate with a 90° included angle, 0.4 mm corner radius and 7° relief angle yields a predictable cutting geometry that simplifies programme settings and tool offsets. The insert’s cylindrical hole with single-sided countersink (40°–60°) ensures secure clamping in ISO-compatible holders, while the 3.97 mm thickness contributes to rigidity under load. Together, these features reduce setup adjustments and support repeatable results when paired with the appropriate shims, clamping sets and replacement screws. Application guidance and production benefits from the AH6225 grade Designed for both external and internal turning, the single-sided chipbreaker provides consistent chip formation when matched to feed and depth of cut; this makes the grade suitable for medium-depth operations and varying cut conditions. Using this insert in a coordinated system—insert, holder or boring bar, shim/clamp and fasteners—improves process reliability and can lower overall tooling costs through longer effective tool life and fewer unexpected tool changes. The article number and manufacturer SKU are documented for traceability and inventory planning. For dependable stainless-steel turning with Tungaloy inserts, contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6829649 Manufacturer SKU: TUN6829649 Model series: ISO turning inserts Material: Carbide Brand: Tungaloy Designation: SCMT09T304 AH6225 Facts Plate size: 09 Plate form: Square Included angle: 90° Corner radius: 0.4 mm Relief angle: 7° Plate thickness: 3.97 mm Hole: cylindrical with single-sided countersink 40°–60° Special features PVD-coated carbide grade AH6225 One-sided chipbreaker For external and internal turning ISO compatibility; fits matching holders and shims System components: insert, holder/boring bar, shim/clamp, replacement screws FAQ Which materials is this insert suitable for? The AH6225 grade is formulated primarily for stainless steel machining; the SCMT09T304 insert performs well under medium cutting conditions and changing cut scenarios. What are the key geometry specifications of the insert? The insert offers a 90° included angle, 0.4 mm corner radius and a 7° relief angle, combined with a plate thickness of 3.97 mm for stable engagement. How is the insert secured in the toolholder? The insert has a cylindrical hole with a single-sided countersink (40°–60°) and is made to ISO dimensions so it seats reliably in compatible holders with the appropriate shim and clamping set. What benefits does the AH6225 coating provide? The PVD coating on the AH6225 carbide improves edge life and wear resistance while maintaining a sharp cutting profile for controlled chip formation in stainless-steel turning. Is the insert suitable for internal turning operations? Yes; the SCMT09T304 geometry and single-sided chipbreaker make it appropriate for both external and internal turning when used with a matching boring bar and correct process parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH6235, ISO interchangeability and a 0.4 mm corner radius for stable, productive turning of challenging materials; order the SCMT09T304 AH6235 insert via Metav Werkzeuge or ask the consultants for holder recommendations and availability. SCMT09T304 AH6235 turning insert by Tungaloy — ISO square insert for turning The SCMT09T304 AH6235 is an ISO-standard square turning insert engineered for general external and internal turning operations, optimised for rostfreier Stahl and applications with interrupted cuts. ISO square insert SCMT09T304, 90° form PVD-coated carbide grade AH6235 Optimised for rostfreier Stahl and interrupted cuts 0.4 mm corner radius, 7° relief angle Precision and performance for demanding turning tasks The combination of a PVD-coated surface and the AH6235 carbide grade delivers a tougher cutting edge that resists chipping during intermittent machining. For manufacturers working with rostfreier Stahl, this grade provides a balance between edge strength and wear resistance, reducing unexpected tool changes and contributing to more predictable cycle times. The coating improves adhesion resistance and thermal stability, which helps maintain cutting performance under variable loads and increases the interval between indexings. Secure clamping and ISO compatibility for simple integration As an ISO-standard insert, the SCMT09T304 offers straightforward interchangeability with compatible holders; compatibility depends on form, 7° relief angle, tolerance class, fastening method, size and thickness. The square geometry and 90° form permit versatile turning strategies, while the cylindrical hole with a single-sided countersink (40°–60°) ensures reliable seating and repeatable clamping. A 0.4 mm corner radius adds edge strength for interrupted cuts without sacrificing acceptable surface finish, simplifying tool selection for a wide range of setups. Application guidance and machining benefits Designed for external and internal turning, this insert is paired ideally with a matching one-sided chipbreaker and a holder that supports stable overhangs. The carbide substrate combined with the PVD layer is particularly suited to workpieces prone to built-up edge and brittleness; the tougher grade mitigates fracturing and promotes controlled chip formation. Selecting this insert can lead to higher first-pass yields and reduced remachining, making it a practical choice where process stability and consistent surface quality are priorities. For precision turning solutions with Tungaloy AH6235 inserts, contact Metav Werkzeuge for detailed holder compatibility and availability at info@metav-werkzeuge.com or call +49 2822 7131930 — expert assistance is available to match the insert to the exact application. Technical Data Article number: 6890183 SKU: 6890183-Tungaloy Manufacturer SKU: TUN6890183 Product designation: SCMT09T304 AH6235 Application: Drehen Facts Plate size: 09 Plate thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Form angle: 90° Hole: with hole; cylindrical hole + single-sided countersink 40°–60° Special features Material: Hartmetall Coating: PVD Chipbreaker: one-sided Shape: quadrilateral (square) Compatibility: ISO-standard insert, holder-dependent on form and tolerance FAQ Is this insert suitable for rostfreier Stahl? The SCMT09T304 AH6235 insert is formulated specifically for applications in rostfreier Stahl; the tougher AH6235 grade and PVD coating reduce chipping and prolong edge life during intermittent cuts. Which turning operations are appropriate for this insert? Suitable operations include both external and internal turning where a 90° square geometry is required; pairing the insert with a matching chipbreaker supports controlled chip formation. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius increases edge robustness for interrupted cuts and reduces the risk of corner chipping, with minimal compromise to surface finish when cutting parameters are set correctly. What does the hole and countersink design provide? The cylindrical hole with a single-sided countersink (40°–60°) ensures reliable seating in standard ISO clamping systems, improving repeatability and clamping stability. Is this insert interchangeable with other ISO holders? Interchangeability is possible with ISO-compatible holders, provided the holder matches the insert form, relief angle, tolerance class, fastening and thickness; check the holder specifications before mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 AH6235 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH6235 grade for improved resistance to chipping, a compact 0.4 mm corner radius for versatile finishing, and ISO-standard compatibility to maintain process reliability; order the insert directly through Metav Werkzeuge or consult the team for application guidance. SCMT 09T304 AH6235 Tungaloy indexable insert for turning, square 09 form The SCMT 09T304 AH6235 is an ISO-standard, square indexable insert designed for external and internal turning, optimised for machining stainless steels and interrupted cuts. PVD-coated carbide grade AH6235 Designed for stainless steel and interrupted cuts Square 09 form with 0.4 mm corner radius Cylindrical hole with single-sided countersink 40°–60° Consistent cutting performance where chipping risk is high The combination of PVD-coated surface treatment and the AH6235 carbide formulation delivers a tougher cutting edge that resists premature wear during interrupted cuts and when machining stainless steel. The coating reduces built-up edge and increases thermal resistance, which stabilises tool life under variable load. For shops seeking predictable cycle times and fewer index changes, this specification supports longer productive runs while maintaining surface finish quality. Secure mounting and ISO compatibility for easy tool management Built to the ISO geometry, the insert fits standard external holders and boring bars by form, clearance angle and thickness, simplifying inventory and reducing set‑up time. The cylindrical hole with a single-sided countersink (40°–60°) ensures reliable clamping and repeatable seating; the 7° relief and the 90° included angle contribute to predictable cutting forces and chip flow. Clear, standardised interfaces enable straightforward replacement and reduce the risk of incorrect mounting. Application focus: interrupted cuts, reduced rework and efficient throughput The one-sided chipbreaker geometry is tailored to evacuate chips efficiently in stop‑start cutting conditions, lowering the chance of edge fracture in unstable cuts. The 0.4 mm corner radius balances edge strength with the ability to produce good edge integrity and acceptable surface finish in a single pass. Practical advantages include fewer tool changes, less rework after breakouts, and steady component quality—particularly important in batch production or mixed-lot environments. For material varieties and process stability, pair this insert with a matching clamping set and holder rated for the intended feeds and speeds. Contact Metav Werkzeuge for application recommendations and to request the Tungaloy SCMT09T304 AH6235 insert (SKU TUN6890186) for robust stainless steel turning Technical Data Article number: 6890186 Manufacturer SKU: TUN6890186 SKU: 6890186-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: 09T304 Facts Shape: square (09) Corner radius: 0.4 mm Thickness: 3.97 mm Relief angle: 7° Included angle: 90° Special features PVD-coated carbide, grade AH6235 Material: carbide One-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) Designed for turning and interrupted cuts FAQ What materials is this insert suitable for? The SCMT 09T304 AH6235 insert is formulated for stainless steel machining and performs well in interrupted cuts where chipping risk is increased. How does the AH6235 grade improve performance? The AH6235 grade combines a tougher substrate with a PVD finish to resist edge chipping and thermal wear, extending usable life in variable cutting conditions. Which holders are compatible with this ISO geometry? ISO-compatible external holders and boring bars that accept a square 09 insert with a 7° relief and a 3.97 mm thickness will accommodate this insert reliably. What is the purpose of the single-sided countersink on the hole? The cylindrical hole with a single-sided countersink (40°–60°) facilitates secure seating and repeatable clamping, reducing the risk of rotation and misalignment during cutting. Can this insert be used for internal boring as well as external turning? Yes; the ISO geometry and square form make the insert suitable for both external and internal turning when paired with the appropriate holder and clamping components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide durability, AH725 process security and ISO compatibility for consistent turning results; order directly via Metav Werkzeuge or consult our technical team for selection advice. SCMT09T304 AH725 indexable turning insert – square ISO insert for turning | Tungaloy The SCMT09T304 AH725 is a square ISO indexable insert designed for external and internal turning, offering universal performance on steel and stainless steel where process security and fracture resistance are required. ISO‑standard square insert SCMT09T304 AH725 PVD‑coated, universal, fracture‑resistant 0.4 mm corner radius for precise profiling 7° relief angle, 3.97 mm thickness Stable process security for reliable turning The SCMT09T304 AH725 insert is engineered for consistent chip control and repeatable results in turning applications. The PVD‑coated carbide substrate provides a balance between wear resistance and edge toughness, which reduces unexpected tool failure and contributes to steady cycle times. For production environments where material mixes occur, the universal AH725 grade helps maintain cutting stability; this leads to fewer interrupted cycles and more predictable tool changes, improving overall shopfloor efficiency. Material versatility with focused cutting performance Optimised for a wide range of steels including stainless variants, the grade delivers reliable behaviour across varying workpiece materials. The single‑sided chipbreaker geometry works with the insert’s edge form to shape chips for safe evacuation, reducing recutting and surface defects. For users less familiar with insert technology: the chipbreaker is a machined groove on the rake face that guides swarf away from the cutting zone, enhancing surface finish and tool life without compromising material removal rates. Simple compatibility and secure clamping As an ISO indexable insert, compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; the square form and indexed geometry make positioning straightforward in most standard external holders and boring bars. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) to fit common clamping systems and ensure stable seating. Clear mechanical fitment contributes directly to reduced vibration and better concentricity, which is particularly beneficial in finishing passes. Practical benefits: precision, repeatability and lifecycle With a 0.4 mm corner radius and 3.97 mm plate thickness, the insert provides a good compromise between edge strength and profile fidelity for finishing and light medium turning. The 7° relief angle reduces rubbing on the flank face, lowering heat generation and improving life in interrupted cuts. Choosing a universal, fracture‑resistant grade minimises tool inventory complexity while preserving performance—ideal for shops seeking economical, predictable production rather than a large range of specialised grades. For applications demanding process security and longevity, contact Metav Werkzeuge to discuss the SCMT09T304 AH725 insert or request tailored cutting recommendations via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6856783-Tungaloy Manufacturer article number: 6856783 Manufacturer SKU: TUN6856783 Model series: ISO‑indexable turning inserts Numbers / Core technical data Corner radius: 0.4 mm Plate thickness: 3.97 mm Free/relief angle: 7° Plate size: 09 Approach/lead angle: 90° Designs / Special features Material: carbide Grade/coating: AH725 PVD‑coated Plate form: square Chipbreaker: single‑sided Hole: cylindrical hole + single‑side countersink (40°–60°) Application: turning (external and internal) FAQ What materials is the SCMT09T304 AH725 suitable for? The SCMT09T304 AH725 insert is specified for a broad range of steels, including stainless steels, and is intended as a universal, fracture‑resistant solution for turning operations. How does the AH725 grade improve process security? The AH725 PVD‑coated grade combines edge toughness with wear resistance to resist chipping under variable conditions, which enhances process security and reduces unscheduled tool changes. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance and clamping; the insert’s square form, cylindrical hole and countersink are compatible with standard ISO external holders and appropriate boring bars. What cutting performance can be expected from the 0.4 mm radius? A 0.4 mm corner radius provides precise profile control for finishing and light medium turning while retaining sufficient edge strength for interrupted cuts. Is the insert single‑edged or double‑edged, and what is the chipbreaker type? The insert is single‑sided with a dedicated single‑sided chipbreaker designed to produce controlled swarf and consistent surface finish in turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of AH725 PVD-coated carbide for broad material coverage and a 0.4 mm corner radius for versatile turning — designed to deliver consistent chip control and high process security. Order the insert directly via Metav Werkzeuge or consult the technical advisers for selection and holder compatibility. SCMT 09T304 AH725 ISO turning insert — PVD-coated carbide for turning (Tungaloy) The SCMT09T304 AH725 is an ISO-format, square turning insert engineered for external and internal turning, featuring a 0.4 mm corner radius and a 7° clearance angle for secure seating and reliable cutting. ISO square insert SCMT 09T304 PVD-coated carbide grade AH725 0.4 mm corner radius for versatile cuts 7° clearance angle for secure seating Cylindrical hole with single-side countersink Robust performance across steels for dependable cycle times The AH725 grade is a PVD-coated carbide formulation optimised for both steel and rostfreier Stahl applications, offering reliable wear resistance where material mixes occur. Owing to the coating and microstructure, the insert supports stable chip formation, reducing unplanned interruptions and improving overall productivity on the shop floor. For operations that demand repeatable results with smaller tool sizes or varying workpiece materials, this grade provides a balanced compromise between toughness and wear resistance. Secure clamping and geometry that supports process security Designed as an ISO square insert with a 7° clearance angle, the geometry ensures proper seating and minimal movement under cutting forces. The combination of the cylindrical hole with a single-side countersink (40°–60°) and the standardised shape facilitates straightforward mounting in compatible holders, lowering setup time and the risk of misalignment. This mechanical certainty translates directly into fewer rejects and a steadier production flow. Precision edge and radius for versatile turning operations The 0.4 mm corner radius provides a controlled cutting edge that copes well with finishing and light roughing passes, delivering good surface quality while maintaining life expectancy. The insert thickness and square form give dimensional stability during contact, enabling consistent chipbreak performance with the one-sided chipbreaker. Where surface finish and dimensional adherence are priorities, this geometry helps to reduce rework and secondary operations. Practical compatibility and system considerations As an ISO-standard turning plate, compatibility with holders is determined by form, clearance, tolerance class, fastening, size and thickness. The insert functions within a system that includes a matching external holder or boring bar, backer/clamping set and replacement screws. When integrating into existing tool inventories, confirm holder match to preserve the engineered seating angle and ensure the best performance from the PVD-coated AH725 grade. For robust, versatile turning operations, contact Metav Werkzeuge to secure Tungaloy SCMT09T304 AH725 inserts or to request tailored holder recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6856712 Manufacturer SKU: TUN6856712 SKU: 6856712-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.4 mm Clearance angle: 7° Included angle: 90° Thickness: 3.97 mm Plate size: 09 Special features Coating: AH725 (PVD-coated carbide) Plate form: square Mounting hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: one-sided Application: Turning (external and internal) FAQ What materials is this insert suitable for? The SCMT09T304 AH725 insert is suitable for steel and rostfreier Stahl; the AH725 PVD-coated carbide grade is chosen for broad material coverage and stable chip formation. How does the 0.4 mm corner radius affect finishing? A 0.4 mm corner radius balances edge strength and surface finish, allowing the insert to handle both light roughing and finishing passes with reduced risk of edge chipping. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions; compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness — confirm holder match before use. What mounting hole style does the insert use? The insert features a cylindrical mounting hole with a single-side countersink (approx. 40°–60°) to ensure secure seating in the clamping assembly. Which chip control is provided by the insert? The one-sided chipbreaker combined with the AH725 grade offers controlled chip formation and contributes to consistent process security in varied turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 AT9530 Wendeplatten - Tungaloy
Take advantage of a coated cermet AT9530 grade for superior surface finish and predictable wear, paired with a precise 0.4 mm corner radius and ISO‑compatible square form for reliable turning operations. Order directly via Metav Werkzeuge or consult our specialists for matching holders and clamping sets. SCMT 09T304 AT9530 Drehen — Tungaloy turning insert, coated cermet, 0.4 mm radius The SCMT09T304 AT9530 Tungaloy insert is a coated cermet finishing grade designed for external and internal turning of steel, offering consistent wear behaviour and high surface quality in light machining operations. Coated cermet grade AT9530 Optimised for finishing on steel 0.4 mm corner radius for fine detail ISO square insert, 09 size, with hole Superior surface quality through a cermet finishing grade The AT9530 grade combines a coating with a cermet substrate to deliver a stable cutting edge and reduced built-up edge during finishing passes. This results in a noticeably improved surface finish while extending predictable tool life under light cutting conditions. The moderate toughness of the grade helps maintain edge integrity where minimal material removal and high dimensional accuracy are required, making it particularly suitable for applications where consistent part appearance and reduced rework are priorities. Precise fit and secure clamping for predictable machining outcomes Compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness; this insert is ISO‑standardised for straightforward selection. The square shape (09 size) with a 0.4 mm corner radius, 3.97 mm thickness and a 7° relief angle ensures correct seating and repeatable geometry. The insert features a cylindrical hole with a one‑sided countersink (40°–60°) to secure clamping and accurate locating; such details reduce vibration and improve repeatability in both external and internal turning setups. Practical selection and machining guidance for efficient processes For finishing and light turning operations on steel, select the AT9530 grade with the one‑sided chipbreaker provided to control chips and favour consistent cutting forces. The combination of a coated cermet and a small corner radius supports low cutting forces and fine edge definition, which helps to achieve dimensional tolerance quickly and reduce downstream polishing. Where higher material removal is required, choose a tougher grade; for superior surface integrity in final passes the AT9530 offers a clear balance between surface quality and wear stability. Contact Metav Werkzeuge for supply and selection advice on Tungaloy AT9530 inserts—quote SKU TUN6773740 to receive tailored holder recommendations and rapid assistance from our consultants. Technical data Article number: 6773740 Manufacturer SKU: TUN6773740 SKU: 6773740-Tungaloy Model series: ISO-Drehwendeschneidplatten Key dimensions ISO designation: SCMT09T304 Size: 09 Shape: square Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Hole: with hole, cylindrical + one-sided countersink (40°–60°) Included angle: 90° Materials & features Grade: AT9530 Cutting material: coated cermet Application: turning Chipbreaker: one-sided ISO‑compatible Tungaloy original product FAQ Which materials is this insert suitable for? The SCMT09T304 AT9530 Tungaloy insert is optimised for finishing and light machining of steel, offering enhanced surface quality and consistent wear under temperate cutting conditions. What does the 0.4 mm corner radius mean for part finish? A 0.4 mm corner radius on the insert produces finer edge transitions and improved surface integrity during finishing cuts, reducing the need for secondary polishing when using the AT9530 grade. How does the hole and countersink affect clamping? The cylindrical hole with one‑sided countersink (40°–60°) ensures reliable seating and central clamping, which improves locating accuracy and reduces vibration for repeatable turning operations with the SCMT09T304. Can this insert be used for internal turning? Yes, the insert’s geometry and stable wear behaviour make it suitable for both external and internal turning when paired with an appropriate holder and correct clamping. What are the key dimensional parameters to check for holder compatibility? Verify ISO designation, shape (square), thickness 3.97 mm, relief angle 7°, size 09 and hole style; these determine correct fit and secure clamping for the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of a coated cermet grade GT9530, ISO interchangeability and a 0.4 mm nose radius for consistent finishing and extended tool life; order directly via Metav Werkzeuge or consult our specialists for application advice. SCMT 09T304 GT9530 Turning Insert — Tungaloy (coated cermet, 0.4 mm radius) SCMT 09T304 GT9530 is an ISO-form indexable turning insert intended for finishing to light universal turning operations in steel, supplied in a square form for 90° turning applications. SCMT09T304 ISO indexable insert Coated cermet grade GT9530 0.4 mm nose radius for fine finish Compatible with square 90° holders Precision finishing with a wear-resistant cermet grade The insert is manufactured in a coated cermet grade GT9530, engineered for wear resistance and sustained surface quality during finishing and light universal turning of steel. Cermet combines ceramic hardness with metallic toughness, which reduces flank wear and helps maintain a consistent cutting edge under stable machining conditions. This results in improved surface finish and fewer insert changes, supporting efficient batch runs and predictable production cycles. Accurate fit and straightforward ISO interchangeability Designed to the ISO designation SCMT09T304, the insert offers reliable ISO interchangeability, simplifying holder selection and reducing setup variability. The square form with a 90° included angle and a 0.4 mm nose radius provides fine corner geometry suitable for tight tolerance profiles. The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and repeatable seating on compatible external holders or boring bars, reducing vibration and promoting repeatable part quality. Practical machining benefits and process guidance With a 3.97 mm plate thickness and a one-sided chipbreaker, the insert performs well in stable turning conditions where consistent chip control and surface integrity are priorities. The grade is optimised for finishing to light machining rather than heavy roughing; selecting feed and depth of cut to match the intended finish will yield the best balance between tool life and surface quality. Where higher stability or interrupted cuts are expected, consider holders with reinforced support to exploit the insert’s strengths. Contact Metav Werkzeuge for tailored advice on toolholder compatibility and to secure SCMT09T304 GT9530 inserts from Tungaloy; our team can confirm suitability for specific steel grades and machining strategies. Technical data Article number: 6998344 Manufacturer SKU: TUN6998344 Internal SKU: 6998344-Tungaloy Series: ISO turning indexable inserts Material: cemented carbide Facts Radius: 0.4 mm Thickness: 3.97 mm Clearance angle: 7° Included angle: 90° Size code: 09 Special features Coated cermet grade GT9530 One-sided chipbreaker Square form, 90° included angle Cylindrical hole + one-sided countersink (40°–60°) Intended application: turning (finishing to light universal) FAQ What materials is this insert designed for? The SCMT09T304 GT9530 insert from Tungaloy is designed primarily for steel finishing and light universal turning operations where good surface finish and extended tool life are required. How does the GT9530 coating benefit production runs? The GT9530 coated cermet provides enhanced wear resistance and consistent edge integrity, which reduces the frequency of indexable insert changes and supports stable, predictable production results with fewer interruptions. Is the insert compatible with standard ISO holders? Yes. The ISO designation SCMT09T304 denotes compatibility with standard ISO square 90° holders, subject to matching form, clearance angle and tolerance class of the clamping system. What chip control can be expected with this geometry? The one-sided chipbreaker on the SCMT09T304 optimises chip formation for finishing operations; stable cutting conditions and appropriate feed settings will produce short, controllable chips and improved surface quality. Can this insert be used for roughing operations? The SCMT09T304 GT9530 is optimised for finishing to light universal turning. For heavy roughing or highly interrupted cuts, a tougher grade or alternative geometry is recommended to preserve tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 NS9530 Wendeplatten - Tungaloy
Benefit from a precise finishing solution that combines the NS9530 cermet grade with a 0.4 mm nose radius and a 7° clearance angle to deliver low cutting forces and excellent surface quality; order the SCMT09T304 insert directly via Metav Werkzeuge or request guidance from Metav Werkzeuge's consultants if required. SCMT09T304 NS9530 Tungaloy Turning Insert — 0.4 mm Radius, 7° Clearance The SCMT09T304 NS9530 is a square ISO indexable insert for turning, optimised as a finishing grade for steel components and suited to continuous cuts and small depths of cut Cermet grade NS9530 for fine finishing 0.4 mm nose radius for precise contouring 7° clearance angle for low cutting forces Cylindrical hole with 40°–60° countersink Superior finish with a low-force cermet grade The combination of an uncoated cermet in grade NS9530 and a sharp cutting edge is designed specifically for finishing operations on steel, where surface quality matters more than heavy material removal. The microstructure of cermet offers a hard, wear-resistant cutting edge that keeps the cutting forces low, reducing vibration and minimising deflection in less rigid setups. For production environments where consistent surface finish and minimal secondary machining are priorities, this geometry reduces the need for rework and improves downstream process yield. Robust geometry for repeatable turning accuracy A square plate with a nominal included angle of 90°, a 0.4 mm nose radius and a 7° clearance angle provides a balance between profile accuracy and edge strength. The insert's 3.97 mm thickness and the cylindrical hole with a single-sided countersink (40°–60°) ensure secure clamping in compatible ISO holders. These geometric choices contribute to repeatable part dimensions and predictable tool life, especially when the correct holder and tolerance class are matched to the insert's form, relief and fastening design. Practical system benefits and recommended applications The cutting solution integrates into a standard ISO system: indexable insert, suitable external holder or boring bar, shim/clamping set and replacement screws. The one-sided chipbreaker and finishing cut recommendation support continuous turning and small depths of cut on steel, where the goal is improved surface integrity rather than aggressive material removal. Selecting the correct chipbreaker and matching the NS9530 grade to machine rigidity and cutting data will reduce tool changes and contribute to stable, economical production cycles. For personalised cutting data, availability checks or a recommendation tailored to a specific turning task with the Tungaloy SCMT09T304 insert, contact Metav Werkzeuge for expert advice and rapid supply Technical data Article number: 6997721 Manufacturer SKU: TUN6997721 Model series: ISO turning indexable inserts Material: cemented carbide Label: SCMT09T304 NS9530 Tungaloy insert Facts Nose radius: 0.4 mm Included angle: 90° Clearance angle: 7° Thickness: 3.97 mm Size designation: 09 Design and special features Square plate form Cylindrical hole with single-side countersink (40°–60°) One-sided chipbreaker Uncoated cermet, grade NS9530 Intended application: turning (external and internal) Optimised for continuous cuts and small depths of cut Compatibility determined by holder form, relief angle, tolerance, fastening, size and thickness System components: insert + external holder or boring bar + shim/clamping set + replacement screws FAQ What materials is this insert best suited for? The SCMT09T304 in grade NS9530 is optimised for finishing on steel; this cermet grade provides a sharp edge and low cutting forces for high-quality surface finish. Is the insert compatible with standard ISO holders? Yes, the SCMT09T304 is an ISO-form insert; compatibility depends on matching holder form, relief/freiwinkel, tolerance class, fastening method, size and thickness. What does the chipbreaker configuration support? The one-sided chipbreaker on this insert is designed for continuous cutting and small depths of cut, helping to control chips and maintain surface integrity during finishing operations. How does the 0.4 mm radius affect part quality? A 0.4 mm nose radius improves contour accuracy and surface finish while keeping cutting forces moderate, suitable for fine finishing operations where detail and surface appearance are important. Which SKU should be quoted for ordering? Use SKU 6997721-Tungaloy or Manufacturer SKU TUN6997721 when enquiring or placing an order for this insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a finishing-grade NS9530 cermet, a precise 0.4 mm nose radius and ISO conformity for consistent surface quality and predictable clamp compatibility; order the SCMT09T304 directly via Metav Werkzeuge or consult our technical team for application-specific advice. SCMT 09T304 NS9530 Tungaloy – Turning insert for finishing on Stahl SCMT09T304 NS9530 indexable turning insert designed for fine finishing and continuous cuts in Stahl; square format with 90° cutting geometry for reliable external and internal turning. Finishing-grade uncoated cermet NS9530 Square ISO insert SCMT 09, 90° cutting angle Low cutting forces and excellent surface finish Compatible with holders requiring 09T304 form Consistent finishing performance with a cermet cutting edge The SCMT09T304 NS9530 is specified as a finishing-grade, uncoated cermet insert developed to produce very fine surfaces on Stahl during continuous cutting. The combination of a sharp cutting edge and a small 0.4 mm nose radius reduces ploughing and minimises vibrations, which leads to improved first-pass surface quality and fewer rework operations. For operations where chip formation is steady, this grade offers low cutting forces and stable performance, so cycle times can be optimised while maintaining machined tolerances. ISO conformity and secure clamping for predictable setup The insert follows ISO geometry for turning inserts, marked as SCMT 09T304, and is manufactured to match holder form, clearance angles and tolerance classes. The square plate format with a nominal 90° approach angle provides versatile orientation options for external and internal turning. The insert is supplied with a cylindrical hole and one-sided countersink (40°–60°) to suit common clamping systems; compatibility is determined by form, clearance angle and thickness. Using holders specified for the 09T304 form ensures repeatable seating and reduces setup variability. Operational benefits: efficiency, surface quality and tool life As an uncoated cermet, this grade offers a very sharp, wear-resistant cutting edge that is especially effective for low-depth finishing passes. The material choice supports excellent surface finish without additional dressing, and the low cutting forces contribute to reduced spindle load and longer tool life on matched operations. From a rational perspective, fewer finishing passes and predictable tool change intervals translate into improved productivity and lower unit costs over a production run. Practical guidance for optimal results in turning Select a chipbreaker and insert grade that suit the workpiece stability and the chosen feed-and-depth strategy; the single-sided chipbreaker fitted to this plate is intended for controlled chip flow during finishing. Use a stable toolholder and minimise overhang to exploit the small nose radius for excellent surface integrity. For best results on Stahl, maintain continuous cuts and avoid interrupted cutting unless specifically required by the machining strategy. If doubts remain about holder compatibility or process parameters, technical advice is available to align the insert selection with machining requirements. Contact Metav Werkzeuge for purchasing details and tailored process advice on the SCMT09T304 NS9530; technical consultants can advise on holder compatibility and cutting data — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical Data Article number: 6998489 Manufacturer SKU: TUN6998489 Model series: ISO turning inserts Designation: SCMT09T304 NS9530 Core dimensions Shape: square (09) Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Insert angle: 90° Materials & features Substrate: carbide Grade/coating: NS9530, uncoated cermet Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Intended use: turning FAQ What machining tasks suit this insert best? The SCMT09T304 NS9530 is intended for finishing turns on Stahl where a fine surface finish and low cutting forces are required, particularly in continuous cutting conditions. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO geometry SCMT 09T304; compatibility depends on holder form, clearance angle and thickness — a holder matching the 09T304 form will ensure correct seating. Which materials does the NS9530 grade perform well on? The NS9530 uncoated cermet is optimised for finishing Stahl, offering a sharp edge and stable chip formation for high-quality surface results. How does the 0.4 mm nose radius affect the finish? A 0.4 mm nose radius reduces cutting edge contact area and vibration tendency, resulting in smoother surfaces and tighter tolerance control during finishing passes. Can the insert be used for interrupted cuts? This grade is optimised for continuous cuts and small depths of cut; interrupted cutting may reduce edge life unless process parameters and machine rigidity are adjusted accordingly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and ISO compatibility for reliable production results; order the insert via Metav Werkzeuge or consult the technical team for application advice. SCMT 09T304 NS9530 — Tungaloy indexable insert for turning, sharp-edge finishing The SCMT09T304 NS9530 is an ISO-standard square turning insert designed for fine finishing of steel components in continuous-cut applications. Sharp-edge cermet for fine finishing ISO-standard square shape, 09 size Optimised for continuous cuts and small depths Through-hole with cylindrical countersink (40°–60°) High-quality finishing with a sharp cermet grade The insert is specified as an uncoated cermet grade (NS9530), which delivers a sharp cutting edge and reduced cutting forces for improved surface quality on steel. This composition is chosen to combine good wear resistance with an ability to produce low-roughness finishes during light cuts. As a result, components requiring tight surface-tolerance and consistent roughness values benefit from stable cutting behaviour and longer intervals between reworking. Reliable holder compatibility and secure clamping Designed to ISO geometry, the square form and detailed dimensions ensure repeatable compatibility with matching external holders or boring bars. Compatibility is determined by form, relief angle 7°, tolerance class, fastening method, size and plate thickness, so correct pairing with the clamping kit and screws is essential. The insert’s through-hole with cylindrical hole and one-sided countersink (40°–60°) enables secure seating and reliable torque transmission in standard ISO clamping systems. Optimised for continuous cuts and low-depth finishing passes With a single-sided chipbreaker and a small corner radius 0.4 mm, the geometry supports continuous cutting and small depths of cut, reducing vibration and promoting stable chip formation. These characteristics lower process variability, improve tool life and help achieve consistent batch-to-batch surface quality. The design is particularly suitable where modest material removal and excellent surface finish are the primary objectives. Practical integration into workshop tool systems The insert is part of an ISO insert system and is intended to be used with a matching external holder or boring bar, plus the appropriate shim/clamp set and spare screws. Its 3.97 mm plate thickness and square 09 size make it straightforward to fit into common turning tool families, simplifying inventory and tool-change procedures. The system approach supports efficient changeover and predictable machining outcomes, enabling smoother production planning in finishing operations. For precise finishing with Tungaloy cermet inserts, request availability and application guidance from Metav Werkzeuge quoting SKU TUN6998493 — contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical support and stock information Technical data Article number: 6998493 Manufacturer SKU: TUN6998493 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Grade: NS9530 Cutting material: uncoated cermet Substrate material: cemented carbide Facts Corner radius: 0.4 mm Relief angle: 7° Plate thickness: 3.97 mm Size: 09 Included angle: 90° Special features Square plate form Through-hole with cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Intended application: turning, finishing on steel System: ISO insert with matching holder or boring bar, shim/clamp set and spare screws Suitable for continuous cuts and small depths of cut FAQ What material is this insert optimised for? The NS9530 grade is optimised for finishing on steel; the uncoated cermet composition emphasises low cutting forces and high surface quality with continuous cuts. Which geometry and size does the insert use? This is a square ISO insert in 09 size with a 90° included angle and 0.4 mm corner radius, compatible with ISO external holders designed for the SCMT family. How does the through-hole design affect clamping? The through-hole with cylindrical hole and one-sided countersink (40°–60°) provides stable seating and predictable clamp engagement in standard ISO clamping arrangements. Is this insert suitable for interrupted cuts? The design and sharp-edge cermet are optimised for continuous, light finishing cuts; interrupted or heavily interrupted conditions may require a different geometry or grade. What does the system package require for installation? Installation requires a matching external holder or boring bar, plus the appropriate shim/clamp set and replacement screws to ensure correct seating and torque transmission. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 T505 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide and T505 grade for economical cast-iron turning, together with ISO compatibility for rapid tool changes; order via Metav Werkzeuge or consult the technical team for application guidance. SCMT 09T304 T505 indexable insert for turning — Tungaloy A SCMT 09T304 T505 indexable turning insert engineered for efficient, economical machining of cast iron in ISO-based tool systems. CVD-coated carbide for durable cutting Optimised for cast-iron machining Square form with 90° included angle 0.4 mm corner radius for improved finish Stable chip control that increases process efficiency The insert delivers consistent chip control thanks to its one-sided chipbreaker and the T505 grade, which is optimised for productive cast-iron machining. The combination of the CVD-coated carbide substrate and the chipformer reduces the risk of long, stringy chips and helps maintain a stable cutting process. As a result, cycle times are kept short and machine utilisation is improved; fewer interruptions for chip clearing lead to more predictable production runs and easier process planning. ISO conformity and straightforward tool set-up Compatibility with toolholders is governed by the ISO format: shape, 7° relief angle, tolerance class, fastening style, size and thickness determine fit and repeatability. The square form and the cylindrical hole with single-sided countersink (40°–60°) enable secure clamping and reliable seating in standard clamping systems. Using a dedicated holder, shim and clamping kit, inserts can be indexed or replaced rapidly, which supports lean toolroom workflows and minimises downtime during changeover. Robust design for consistent results and lower tooling cost With a 0.4 mm corner radius and a 3.97 mm thickness, the plate balances edge strength and surface finish for general turning tasks. The CVD coating enhances wear resistance under intermittent and continuous cuts, extending tool life in serial production. Fewer insert changes and predictable wear behaviour translate into lower tooling cost per component and more consistent part quality. This insert is therefore suited to workshops that prioritise repeatability and economical machining of cast iron components. For application advice on Tungaloy turning inserts or to check availability of SCMT 09T304 T505, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6831844 Manufacturer SKU: TUN6831844 SKU: 6831844-Tungaloy Series: ISO-Drehwendeschneidplatten Name: SCMT09T304 Facts Corner radius: 0.4 mm Thickness: 3.97 mm Included angle: 90° Relief angle: 7° Size: 09 Special features Material: carbide Coating: CVD Grade: T505 Application: turning (Drehen) Suitable for: cast iron Chipbreaker: one-sided Form: square Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) System components: insert, holder, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The SCMT 09T304 T505 insert is designed primarily for cast iron machining thanks to its T505 grade and CVD-coated carbide construction, providing stable chip control and wear resistance during turning operations. How does the ISO designation affect holder selection? ISO conformity means the insert's fit is determined by its shape, size and tolerance class; the SCMT09T304 form is matched to standard square indexable holders and requires a compatible clamping set for correct seating. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius balances edge strength and surface quality, delivering improved finish over larger radii while maintaining sufficient robustness for general turning tasks with this grade. Is the insert suitable for interrupted cutting? The T505 grade and robust CVD coating provide resilience under variable cutting conditions; however, selection should consider stability, cutting parameters and holder rigidity for interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 T5115 Wendeplatten - Tungaloy
Combining a CVD-coated carbide grade with a 0.4 mm corner radius and ISO SCMT geometry, this insert offers balanced wear resistance and stable cutting edges for reliable cast iron turning; order the insert directly via Metav Werkzeuge or consult our specialists for application support. SCMT 09T304 T5115 turning insert by Tungaloy – ISO square turning insert, CVD-coated carbide, 0.4 mm radius The SCMT09T304 T5115 is an ISO-standard square insert designed for external and internal turning, optimised for cast iron with a balanced combination of wear resistance and edge stability. CVD-coated carbide grade T5115 Universal grade for cast iron machining 0.4 mm corner radius for fine finishing Square 09 insert with 90° cutting angle Central hole with cylindrical plus 40°–60° countersink Reliable performance for cast iron turning The CVD-coated carbide grade T5115 provides a reliable compromise between wear resistance and edge stability, making the insert well suited to the typical demands of cast iron turning. The chemical vapour deposition (CVD) layer increases surface hardness and thermal resistance, which helps to maintain a consistent cutting edge under interrupted cuts and medium cutting speeds. As a result, machining times remain predictable and tool changes are less frequent, supporting continuous production workflows and lower overall tooling costs. ISO compatibility and secure clamping Designed to the ISO plate family, the insert’s compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness. The square 09 geometry and a 90° cutting angle deliver straightforward set-up for standard external and internal operations. The plate is supplied with a central hole and a cylindrical bore plus a one-sided countersink (40°–60°) for positive screw clamping; this arrangement ensures secure seating in a matching holder and consistent rigid support during heavy or interrupted cuts. Clear specification of these parameters reduces setup time and prevents incorrect mating with the toolholder. Stable cutting edge and consistent productivity With a single-sided chipbreaker and a modest 0.4 mm corner radius, the insert supports fine finishing while preserving edge strength. The engineered chip control of the breaker promotes predictable chip formation and evacuation when paired with a suitable holder and cutting parameters, which contributes to safer machining and less downtime. The balanced properties of the grade reduce the need for excessive feeds or speeds to protect the edge, allowing processes to be optimised for both surface finish and throughput without sacrificing tool life. Assembly guidance, chip control and application notes The insert forms part of a system: an ISO insert, a compatible external holder or boring bar, a backing shim/clamp set and the correct replacement screws. Select the chipbreaker and the grade to match the workpiece material, machining operation and machine/tool stability; the T5115 grade is intended as a universal solution for cast iron. For mixed or less stable setups, choose a chipbreaker or holder that prioritises firm clamping and improved chip evacuation. Technical datasheets and component drawings should be consulted to confirm tolerance classes and seating geometry before final assembly. For application support, cutting-parameter recommendations and fast supply of Tungaloy SCMT 09T304 T5115 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and prompt processing Technical Data Article number: 6864772 Manufacturer SKU: TUN6864772 SKU: 6864772-Tungaloy Model series: ISO turning inserts Material: carbide Grade: T5115 Designation: SCMT09T304 Core specifications Size: 09 Cutting angle: 90° Corner radius: 0.4 mm Thickness: 3.97 mm Clearance angle: 7° Hole: with hole Design and special features Plate form: square Central hole style: cylindrical hole + one-side countersink (40°–60°) Chipbreaker: single-sided Coating/type: CVD-coated carbide Application: turning; universal for cast iron Compatibility criteria: form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The SCMT09T304 T5115 turning insert is formulated as a universal grade for machining cast iron and offers a balanced mix of wear resistance and edge stability for such applications. Which geometric specifications define the insert? The insert is a square 09 plate with a 90° cutting angle, a 0.4 mm corner radius and a thickness of 3.97 mm; it has a 7° clearance angle and a central hole with cylindrical bore plus a one-sided countersink (40°–60°). How is the insert fixed to the holder? Fixing relies on the central hole and the countersink style; the combination of form, clearance angle, tolerance class, fastening method, size and thickness defines compatibility with a chosen holder or boring bar. What advantages does the CVD coating provide? The CVD coating on the T5115 grade increases surface hardness and thermal resistance, improving wear behaviour and maintaining edge integrity under normal turning conditions, which supports more consistent process results. Is the insert suitable for fine finishing operations? Yes; the 0.4 mm corner radius and the balanced grade characteristics make the insert appropriate for finishing and semi-finishing passes when paired with correct feeds and stable setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com