SCMT 09T304 T515 Wendeplatten - Tungaloy
Take advantage of the combination of efficient cast‑iron machining, stable edge life and precise geometry for uninterrupted turning operations. Order compatible inserts directly via Metav Werkzeuge or contact the consultants for tailored holder recommendations. SCMT09T304 T515 SCMT turning insert – CVD‑coated carbide, 0.4 mm radius — Tungaloy The SCMT09T304 T515 is an ISO‑standard turning insert developed for economical external and internal turning of cast iron, offering robust cutting performance in interrupted cuts and continuous machining. CVD‑coated carbide grade T515 Economic machining of cast iron Square form with 90° included angle 0.4 mm corner radius for edge strength Increased productivity through CVD‑coated carbide The CVD‑coated carbide grade T515 combines wear resistance with a balanced toughness suited to frequent chip formation when turning cast iron. The chemical vapour deposition process produces a thin, adherent layer that reduces flank wear and extends productive life under standard cutting speeds. For production environments where cycle times and tool change intervals matter, this T515 grade helps reduce overall machining costs by enabling longer runs between indexings and consistent surface finish. Secure geometry for consistent component quality A square insert with a 90° included angle and a 0.4 mm corner radius provides a robust edge for facing and turning shoulders, improving stability where rigidity is limited. The 7° clearance helps avoid rubbing on the flank while maintaining a controlled cutting contact. The plate thickness of 3.97 mm contributes to stiffness in the clamping system, which in turn stabilises vibration and supports repeatable dimensional accuracy on serial parts. Designed for straightforward holder compatibility and chip control Compatibility to a holder is defined by form, clearance angle, tolerance class, mounting, size and thickness; the square form and with‑hole design (cylindrical hole plus one‑sided countersink, 40°–60°) ensure simple, repeatable clamping on many standard external holders. The one‑sided chipbreaker is shaped to promote predictable chip formation when machining cast iron, which reduces the risk of entanglement and protects part surfaces. These features together lower set‑up time and reduce the likelihood of unplanned stops for chip clearing. Practical selection guidance for workshop reliability Choose the chipbreaker and grade based on workpiece stability and cut conditions: the T515 grade is recommended for economical roughing and medium finishing in cast iron, while the single‑sided chipbreaker suits interrupted cuts. When insert life and surface integrity are priorities, pairing the insert with a correctly sized, rigid holder and matching feed rates optimises performance. For specific applications and holder matching, technical advice is available to ensure the chosen insert meets the required balance of tool life and productivity. Contact Metav Werkzeuge for application advice and to source Tungaloy turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6744837 Manufacturer SKU: TUN6744837 SKU: 6744837-Tungaloy Model series: ISO turning inserts Material: Carbide Grade/coating: T515 (CVD) Facts Plate size: 09 Plate shape: square Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 90° Special features With hole: cylindrical hole + one‑sided countersink (40°–60°) One‑sided chipbreaker Suitable for turning (external and internal) Optimised for cast iron machining ISO‑standard geometry for known holder compatibility CVD coating for improved wear resistance FAQ What materials is this insert best suited for? The SCMT09T304 T515 insert is optimised for machining cast iron and performs well in interrupted and continuous turning where reliable chip formation is required. How does the T515 grade affect tool life? The T515 CVD‑coated grade provides enhanced wear resistance, which typically extends tool life compared with uncoated grades under comparable cutting conditions. Which holders are compatible with this ISO insert? Compatibility depends on the holder's form, clearance, tolerance class, mounting and thickness; the square SCMT09T304 form and its hole/countersink arrangement match many standard external holders designed for ISO inserts. What is the purpose of the one‑sided chipbreaker? The one‑sided chipbreaker on this insert promotes controlled chip formation during turning of cast iron, reducing chip length and improving surface protection. How should the corner radius and clearance angle influence feed and speed choices? A 0.4 mm corner radius gives edge strength for heavier cuts; combined with the 7° clearance angle, it supports moderate feeds and speeds that favour stability and surface finish rather than maximum material removal per pass. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated T6215 carbide and precise ISO geometry for reliable, wear-resistant turning of stainless steels; the 0.4 mm corner radius and 7° clearance support consistent part quality and tool life. Order genuine Tungaloy inserts directly via Metav Werkzeuge or contact our consultants for application advice. SCMT09T304 T6215 Tungaloy turning insert — CVD-coated carbide, 0.4 mm radius A SCMT09T304 T6215 Tungaloy insert engineered for ISO-compliant external and internal turning, optimised for rostfreier Stahl under stable to mildly interrupted machining conditions ISO SCMT09T304 format, square insert CVD-coated carbide grade T6215 Suitable for stainless steel turning 0.4 mm corner radius, 7° clearance Reliable cutting performance for stable production The CVD-coated carbide composition T6215 provides a hard, wear-resistant surface that extends tool life when turning stainless steels under stable or slightly interrupted cuts. The hardened coating reduces flank and crater wear, which translates into fewer insert changes and less unplanned downtime. With the ISO-compliant geometry and a square form, the insert gives predictable cutting forces and repeatable results on series components, supporting lean production and consistent surface finish. Geometry designed for secure clamping and chip control The insert’s SCMT09T304 geometry, combined with a 7° clearance and a 0.4 mm corner radius, ensures a dependable fit in standard ISO external holders and effective transition of cutting loads. The cylindrical locating hole with a one-sided countersink (40°–60°) secures the insert against rotation while the one-sided chipbreaker helps direct chips away from the cutting zone. These features reduce vibration and improve tool stability, which benefits dimensional accuracy and prolongs tool life. Clear benefits from material and grade selection Selecting T6215 means choosing a grade formulated for abrasion resistance and thermal stability during machining of rostfreier Stahl. The CVD coating enhances resistance to built-up edge formation, so the insert maintains a sharp cutting edge for longer runs. For workshops processing corrosion-resistant alloys, this results in improved surface integrity and fewer rework operations, delivering measurable cost efficiency and predictable machining cycles. System compatibility and practical application advice The insert is part of an ISO turning insert system that requires a matching external holder, clamping set and replacement screws chosen to the holder’s form, free angle and tolerance class. The 3.97 mm plate thickness and 09 size are standard in many turning tool systems; compatibility depends on holder pocket dimensions and screw/counterbore arrangement. For mixed production environments, pairing the insert with holders designed for square ISO inserts ensures quick changeover and minimal setup time. Contact Metav Werkzeuge today to secure original Tungaloy SCMT09T304 T6215 inserts or to discuss the most suitable grade and holder combination for specific rostfreier Stahl applications — Metav Werkzeuge provides expert advice and quick availability. Technical data Article number: 6876442 Manufacturer SKU: TUN6876442 Brand: Tungaloy Designation: SCMT09T304 Material: carbide Model series: ISO turning indexable inserts Facts Corner radius: 0.4 mm Clearance angle: 7° Included angle: 90° Insert thickness: 3.97 mm Size: 09 Special features CVD-coated carbide grade T6215 Square insert form Cylindrical hole + one-sided countersink (40°–60°) One-sided chipbreaker ISO-compliant turning insert for external and internal turning Suitable for rostfreier Stahl FAQ What materials is this insert designed for? The SCMT09T304 T6215 insert is specified for turning rostfreier Stahl (stainless steels) under stable to slightly interrupted conditions and offers good resistance to abrasion and built-up edge. Which holders are compatible with the insert? Compatibility depends on holder pocket form, free angle, tolerance class, fixing method, size and thickness; the insert fits standard ISO square external holders designed for SCMT09T304 geometry. How does the T6215 grade affect tool life? The T6215 CVD-coated carbide provides a wear-resistant cutting surface that delays flank and crater wear, resulting in longer tool life and more consistent part quality in rostfreier Stahl turning. Is the insert suitable for interrupted cuts? The insert performs best in stable to mildly interrupted cutting; for heavy interruptions, a more robust geometry or a specific chipbreaker may be recommended. What clamping features ensure secure mounting? A cylindrical locating hole with a one-sided countersink (40°–60°) secures the insert axially and radially when used with the correct clamping screw and underlay, preventing rotation and maintaining accurate positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 T6215 Wendeplatten - Tungaloy
A combination of CVD-coated carbide grade T6215 and a precise 0.4 mm corner radius delivers reliable wear resistance and consistent surface quality in stainless-steel turning; compatibility with ISO housings and the square 09 format simplifies tool integration. Order the SCMT09T304 T6215 insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT 09T304 T6215 ISO turning insert for stainless-steel turning — Tungaloy The SCMT09T304 T6215 is an ISO-standard square insert designed for external and internal turning, optimised for stainless steels under stable to lightly interrupted cutting conditions. CVD-coated carbide for high wear resistance Single-sided chipbreaker for reliable chips Square 09 size, 7° relief angle 0.4 mm corner radius for precise profiles Prolonged tool life through a wear-resistant coating The combination of a CVD-coated surface with a robust carbide substrate gives the insert clear advantages in abrasive and adhesive wear scenarios common with stainless steels. The applied coating reduces flank and crater wear, which leads to longer cutting edge life and fewer index changes; this improves process stability and lowers overall machine downtime. For production contexts where consistent finish and predictable tool performance matter, the coated grade offers quantifiable gains in uptime and repeatability. Predictable geometry for secure clamping and surface integrity ISO conformity and the square 09 format ensure straightforward integration into standard holders and boring bars; the insert's 7° relief and 90° included angle support accurate profile generation and repeatable part geometry. The 0.4 mm corner radius provides a balance between edge strength and the ability to produce defined contours, while the central cylindrical hole with a single-sided countersink (40°–60°) enables firm, repeatable clamping. These geometric choices improve chip control and surface finish when paired with a compatible clamping set and replacement screws. Practical workshop benefits and application guidance Built for turning operations, the insert performs best under stable cutting conditions or light interruptions; choose toolholders and feed rates that match machine rigidity to exploit the grade's strengths. The single-sided chipbreaker helps manage swarf in common external and internal turning tasks, reducing rework and enhancing operator safety. The insert is part of a typical system comprising an ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws — a configuration that supports efficient changeover and keeps inventories manageable. For application advice, availability and ordering of Tungaloy T6215 inserts, contact Metav Werkzeuge for tailored recommendations and prompt dispatch. Technical data Article number: 6876440 SKU: 6876440-Tungaloy Manufacturer SKU: TUN6876440 Manufacturer: Tungaloy Designation: SCMT09T304 Material: carbide Coating / Grade: T6215 (CVD-coated) Model series: ISO turning indexable inserts Form: square Hole: with cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: Turning Core data Thickness: 3.97 mm Corner radius: 0.4 mm Size: 09 Clearance angle: 7° Included angle: 90° Countersink angle: 40°–60° Manufacturer article number: 6876440 Manufacturer SKU: TUN6876440 Special features CVD-coated carbide grade T6215 Suited for stainless steels Single-sided chipbreaker for controlled chips ISO-compliant square insert (09) Central hole with one-sided countersink for secure clamping System build: insert, external holder or boring bar, shim/clamping set, replacement screws FAQ Is this insert suitable for stainless-steel turning? Yes. The SCMT09T304 T6215 indexable insert from Tungaloy is formulated for turning stainless steels under stable to lightly interrupted conditions, offering enhanced wear resistance and consistent edge life. Can the insert handle interrupted cuts? The grade is optimised for stable cutting and light interruptions; for heavy interruptions, consider a geometry and holder setup with higher rigidity to protect the edge from shock loads. Which holders are compatible with this insert format? ISO-compliant square 09 external holders or boring bars that accept a square SCMT insert with a central hole and countersink are compatible; correct matching of form, clearance and tolerance class is essential for secure clamping. How does the single-sided chipbreaker influence performance? A single-sided chipbreaker promotes consistent chip formation and evacuation in turning stainless steels, reducing the risk of entanglement and improving surface finish when combined with appropriate feeds and speeds. What mounting features need attention during installation? Ensure the clamping set and replacement screws match the central cylindrical hole plus one-sided countersink (40°–60°) and that the holder provides correct support for the 3.97 mm thickness to maintain repeatable positioning and cutting accuracy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 T9215 Wendeplatten - Tungaloy
Take advantage of a combination of high wear resistance and precise geometry for productive turning operations; the CVD-coated T9215 grade ensures long tool life while the ISO-standard form and hole style guarantee compatibility with common holders. Order or request consultation through Metav Werkzeuge for implementation support. SCMT09T304 T9215 ISO turning insert for turning (Tungaloy) — CVD-coated carbide, 0.4 mm radius The SCMT09T304 T9215 is an ISO-standard square turning insert designed for external and internal turning, offering a balance of wear resistance and breakage safety for medium steel machining CVD-coated carbide grade T9215 0.4 mm nose radius for precise finishes 7° clearance angle for stable machining Square ISO insert with cylindrical hole Greater throughput with a wear-resistant cutting grade The CVD-coated T9215 carbide grade combines pronounced wear resistance with reliable fracture behaviour, making it a suitable choice for continuous to lightly interrupted cuts in medium steel. This material choice reduces flank wear under comparable cutting conditions and can extend effective tool life, contributing directly to higher part counts per index. The result is a measurable improvement in process economy through fewer tool changes and more stable cycle times. Predictable part quality thanks to defined geometry The square insert with a 90° included angle and a 0.4 mm nose radius delivers consistent surface finish and dimensional control on shoulders and plunges. A 7° clearance angle supports secure cutting edge engagement and reduces rubbing, while the cylindrical hole with single-sided countersink (40°–60°) ensures reliable locating and clamping in standard ISO holders. The plate thickness of 3.97 mm stabilises the insert under moderate radial loads, assisting in repeatable results across batches. Easy integration into ISO-based tool systems Integration is straightforward: compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness, so select a matching external holder or a suitable boring bar, plus the appropriate shim and clamping hardware. The single-sided chipbreaker and grade pairing should be chosen according to workpiece stability and the intended cutting mode. For complex setups or material mixes, consult engineering data to match cutting parameters and reach the full benefit of the ISO-standard system architecture. For high-productivity turning with Tungaloy reliability, contact Metav Werkzeuge to order the SCMT09T304 T9215 insert or to obtain tailored machining advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: 6774070 Manufacturer SKU: TUN6774070 SKU: 6774070-Tungaloy Manufacturer: Tungaloy Facts Nose radius: 0.4 mm Clearance angle: 7° Included angle: 90° Plate thickness: 3.97 mm Size: 09 Hole style: Cylindrical hole + one-sided countersink (40°–60°) Special features Material: carbide Coating: CVD-coated Grade: T9215 (for medium steel) Chipbreaker: single-sided Plate form: square Model series: ISO turning inserts Application: external and internal turning Compatible with ISO-standard holders and boring bars FAQ What materials is this insert intended for? The SCMT09T304 T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade provides wear resistance suited to continuous and lightly interrupted cuts. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm radius offers a balance between strength and finish quality, producing good surface results on shoulders while maintaining edge robustness for general turning tasks. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening type, size and thickness; the square ISO form and cylindrical hole fit ISO-standard external holders and boring bars when matched correctly. Is the chipbreaker suitable for interrupted cuts? The single-sided chipbreaker paired with the T9215 grade is suitable for continuous to slightly interrupted cutting; for heavy interruptions, a more robust chip control strategy should be selected. What mounting hardware is required for secure clamping? Use the appropriate shim/underlay, clamping set and replacement screws specified for the chosen ISO holder to ensure correct seating and torque. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 T9215 Wendeplatten - Tungaloy
Benefit from the combination of ISO conformity, CVD-coated carbide performance and a robust 0.4 mm corner radius for reliable medium-steel turning — order directly via Metav Werkzeuge or request specialist advice from our consultants. SCMT 09T304 T9215 Tungaloy insert for turning — ISO square insert with 0.4 mm corner radius A SCMT 09T304 T9215 indexable insert designed for ISO-standard turning operations, offering high wear resistance and fracture strength for productive external and internal machining. CVD-coated carbide grade T9215 for medium steel 0.4 mm corner radius for robust chamfering ISO-square SCMT insert with 7° relief angle Cylindrical hole with single-side countersink Faster cycles through high wear resistance and stable cutting The CVD-coated T9215 grade combines wear resistance with impact tolerance to extend tool life during continuous or lightly interrupted cuts. As a result, fewer tool changes are required and cycle times are reduced while maintaining consistent component quality. This performance is particularly valuable for medium-steel production runs where reproducible tool life translates directly to lower machining cost per part. The coating and substrate are selected to balance productivity with predictable performance under typical turning conditions. Secure fit and predictable interchangeability across ISO systems Compatibility is ensured by the ISO-standard geometry: shape, relief angle, tolerance class, mounting, size and thickness determine the correct match with a holder. The square SCMT form with a 0.4 mm corner radius, a 7° relief and a plate thickness of 3.97 mm provides a stable seating surface and repeatable clamping behaviour. This standardised approach makes retrofit and inventory management straightforward, as inserts from the same ISO family will align with existing tooling systems when the seat and fastening match. Consistent chip control and improved surface finish The single-sided chipbreaker is engineered for controlled chip formation in medium-steel turning, reducing heat concentration at the cutting edge and facilitating swarf evacuation. Predictable chip flow supports stable feeds and better surface quality on both external and internal contours. The modest corner radius increases edge strength to resist notch wear and minimise the risk of edge failure, which is especially beneficial in interrupted cuts and when machining components with variable wall thicknesses. For application support or to request this Tungaloy grade T9215 insert via Metav Werkzeuge, quote SKU TUN6772460 and contact info@metav-werkzeuge.com or call +49 2822 7131930 for fast procurement assistance and technical guidance Technical Data Article number: 6772460 Manufacturer SKU: TUN6772460 Designation: SCMT09T304 T9215 Tungaloy insert Shape: square Mounting: with hole Facts Corner radius: 0.4 mm Thickness: 3.97 mm Size: 09 Relief angle: 7° Included hole style: cylindrical hole + single-side countersink (40°–60°) Geometry angle: 90° Special features Coating: CVD-coated carbide, grade T9215 Application: turning (external and internal) Chipbreaker: single-sided Compatibility: ISO-standard insert — fit depends on form, relief angle, tolerance class, mounting, size and thickness Typical system: insert + appropriate external holder or boring bar, seating pad/clamp set and replacement screws Manufacturer: Tungaloy FAQ What materials is this insert intended for? The grade T9215 is specified for medium steel machining; the SCMT 09T304 insert offers a balance of wear resistance and fracture toughness suitable for continuous to lightly interrupted turning of steel. Which operations benefit most from this insert? External and internal turning are the primary applications; the single-sided chipbreaker and the 0.4 mm corner radius help maintain surface finish and edge strength during general-purpose turning. How is compatibility with a holder determined? Compatibility is governed by ISO geometry: form, relief angle (7°), tolerance class, mounting, size (09) and thickness (3.97 mm) must match the holder seat and clamping method for secure use. What chip control can be expected? The single-sided chipbreaker provides predictable chip control, promoting efficient evacuation and stable cutting conditions that improve surface quality and reduce heat at the cutting edge. What are the identifying numbers for ordering? The product is listed as SCMT09T304 T9215 (manufacturer article number 6772460, SKU TUN6772460) for procurement and inventory reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade (T9225), a 0.4 mm corner radius and ISO compatibility for consistent performance in medium to heavy steel turning; order directly via Metav Werkzeuge or request advice from our consultants. SCMT 09T304 T9225 ISO indexable turning insert — Tungaloy SCMT 09T304 T9225 is a square ISO indexable insert designed for robust medium to heavy steel turning, offering a balance of toughness and wear resistance for variable cutting conditions CVD‑coated cemented carbide grade T9225 Square ISO insert with 0.4 mm corner radius Single‑sided chipbreaker for reliable chip control With cylindrical hole and 40°–60° countersink Consistent metal‑cutting performance for steel turning The insert is engineered to deliver stable cutting in demanding turning applications. The CVD‑coated carbide substrate of grade T9225 provides a combination of wear resistance and toughness that keeps edge integrity under fluctuating loads, making it suitable for medium to heavy steel turning. The modest 0.4 mm corner radius supports edge strength and allows acceptable surface finish, while the 7° clearance contributes to reduced rubbing and lower cutting forces. These factors translate into longer tool life and predictable change intervals, which help to stabilise machining cycles and reduce downtime. ISO compatibility and secure mounting for straightforward integration The insert follows the ISO designation and the SCMT geometry, ensuring compatibility with standard negative holders and boring bars when the holder matches in form, relief angle, tolerance class, clamping and thickness. The plate is square with designation size 09 and a plate thickness of 3.97 mm, enabling a robust clamping interface. The centre feature includes a cylindrical hole with a single‑side countersink (40°–60°), which simplifies secure fastening with the appropriate screw and clamp set. This standardised configuration makes retrofits and tool‑holder matching straightforward in established turning tool systems. Chip control and application guidance for interrupted or variable cuts Equipped with a single‑sided chipbreaker, the insert is optimised to guide and split chips reliably under typical turning conditions, reducing the risk of long, stringy swarf and improving process safety. The grade is a universal, robust option particularly effective where cutting conditions vary or where slight interruption in the cut occurs; the combination of chip control and toughness supports productive machining with fewer insert changes. Typical uses include both external and internal turning operations; selecting the correct chipbreaker variant and matching it to workpiece material and machine rigidity will maximise productivity and surface quality. For reliable, ready‑to‑use indexable inserts from Tungaloy, contact Metav Werkzeuge to discuss the SCMT 09T304 T9225 and find the correct holder and clamping set for specific turning tasks Technical data Article number: 6781208 Manufacturer SKU: TUN6781208 Our SKU: 6781208-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Corner radius: 0.4 mm Plate thickness: 3.97 mm Included angle: 90° Clearance (relief) angle: 7° Plate size: 09 Special features Material: cemented carbide (Hartmetall) Coating: CVD Grade: T9225 (robust universal grade) Shape: square (SCMT) Chipbreaker: single‑sided Hole: cylindrical hole with single‑side countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert intended for? The SCMT 09T304 T9225 insert is intended primarily for medium to heavy steel turning, with the T9225 grade designed for robust performance under varied engagement conditions. How does the T9225 grade perform with interrupted cuts? Tungaloy’s T9225 is a tougher, CVD‑coated carbide grade formulated to resist chipping during interrupted or unstable cuts, offering improved reliability compared with more wear‑focused grades. What must be matched to ensure correct fit in a toolholder? Compatibility depends on holder form, relief angle, tolerance class, clamping and screw arrangement; the SCMT geometry, plate thickness (3.97 mm) and the centre hole with countersink are key parameters for correct mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD coating, a robust T9225 grade and precise geometry to ensure reliable performance in medium-to-heavy steel turning; the package supports consistent chip control and long tool life. Order the SCMT09T304 directly via Metav Werkzeuge or ask the consultants for tailored machining advice. SCMT 09T304 T9225 Turning Insert (ISO) — Tungaloy, CVD-coated carbide, 0.4 mm radius The SCMT09T304 T9225 is an ISO-standard square indexable insert for turning, engineered for medium-to-heavy steel machining where variable engagement conditions demand toughness and stable chip formation. ISO indexable insert SCMT09T304 CVD-coated carbide grade T9225 0.4 mm corner radius, 7° relief angle With hole and 40°–60° countersink Consistent chip control and predictable performance for turning steel The square ISO insert delivers repeatable results through its single-sided chipbreaker and defined geometry. The combination of a CVD-coated surface and a carbide substrate in the T9225 grade offers enhanced resistance to flank wear while maintaining the toughness required for interrupted cuts. For shops processing a range of steels, this results in fewer insert changes and steadier surface finish, improving cycle-time reliability without complex parameter adjustments. Toughness and wear resistance where engagement varies The chosen T9225 grade provides a balance between hardness and fracture resistance, suited to mixed-duty turning operations. The CVD coating protects the cutting edge at elevated temperatures and under fluctuating loads, while the substrate sustains the cutting edge during light impacts or varying depths of cut. This makes the insert a pragmatic choice when workpieces or process stability are not uniform, reducing the risk of premature edge chipping and unplanned downtime. Secure clamping and easy indexation for efficient tool changes The insert features a cylindrical hole with one-sided countersink (40°–60°), enabling precise location in compatible holders and facilitating stable clamping. The 7° relief angle and square shape simplify setting and re-indexing, while the 0.4 mm corner radius offers a compromise between edge strength and surface finish. These details reduce set-up time and support predictable insert life across repetitive production runs. Select the right chipbreaker and holder for best results Performance depends on matching the single-sided chipbreaker and the insert grade to the workpiece material and machining conditions. For medium and heavy cuts in steel, pairing this insert with a rigid external holder and appropriate cutting parameters maximises productivity. Where higher feed or interrupted cuts are present, the robust T9225 grade helps maintain edge stability, while gentle increases in feed benefit from the defined corner radius for improved tool life. For purchases or machining consultations regarding the SCMT09T304 T9225 grade, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com — for prompt supply and application support. Technical data Article number: 6781106 Manufacturer SKU: TUN6781106 SKU: 6781106-Tungaloy Model series: ISO turning indexable inserts Name: SCMT09T304 T9225 Tungaloy insert Material: carbide Coating: CVD Key dimensions Insert size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 90° Special features Single-sided chipbreaker Cylindrical hole + one-sided countersink (40°–60°) Square insert form Designed for turning applications Robust universal grade for medium–heavy steel machining Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert suitable for? The SCMT09T304 T9225 insert is primarily intended for medium-to-heavy machining of steel; the T9225 carbide grade and CVD coating support reliable cutting in variable engagement conditions. How does the insert locate in the toolholder? Location is via the cylindrical hole with a one-sided countersink (40°–60°); this geometry ensures firm clamping and repeatable positioning in compatible external holders. What cutting geometry supports interrupted cuts? The T9225 grade offers enhanced toughness for interrupted cutting. Combined with the 0.4 mm corner radius and single-sided chipbreaker, the insert is well suited to light interruptions and variable engagement. Can the insert be rotated to present a fresh edge? Yes, the square ISO geometry allows indexation to multiple cutting edges; secure clamping and correct seating are essential to achieve consistent tool life and finish. Which holder type is recommended for maximum stability? A rigid external turning holder designed for ISO square inserts and matching the insert’s form, thickness and fastening style provides best stability and repeatable results with the SCMT09T304. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T304 T9225 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide (T9225) and a 0.4 mm nose radius for dependable medium-to-heavy steel turning; the square 90° geometry and 7° relief angle ensure stable seating and repeatable results. Order the SCMT09T304 T9225 insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. SCMT09T304 T9225 — CVD-coated carbide ISO turning insert, 0.4 mm radius (Tungaloy) The SCMT09T304 T9225 is a square ISO indexable insert engineered for external and internal turning operations, providing a robust combination of wear resistance and toughness for varying engagement conditions. CVD-coated carbide grade T9225 Square geometry with 90° included angle 0.4 mm nose radius for versatile finishing Cylindrical hole with single-sided countersink Reliable cutting performance for medium to heavy steel turning The combination of a CVD-coated surface on a tough carbide substrate (grade T9225) is designed to balance wear resistance and edge strength, making the insert well suited to interrupted cuts and variable engagement. The moderate nose radius of 0.4 mm supports consistent surface finish without compromising chip control, while the coating reduces built-up edge and increases tool life under standard turning feeds and speeds. This results in predictable machining behaviour and reduced downtime for insert changes. Secure seating and straightforward holder compatibility As an ISO-compliant turning insert, compatibility with the toolholder is governed by the insert form, relief angle, tolerance class, clamping method, size and thickness. The square shape with a 90° included angle offers four usable cutting edges per insert, while the 7° relief angle and 3.97 mm plate thickness support reliable clamping and repeatable positioning in standard external holders and boring bars. The cylindrical hole with a single-sided countersink (40°–60°) ensures secure fixation with common screw systems and a stable cutting geometry for consistent results. Practical guidance for selection and application The single-sided chipbreaker and the universal nature of the grade make this insert suitable for a range of turning tasks. Typical uses include external finishing and medium-depth roughing as well as internal turning where stability permits. Selection of the matching chipbreaker and grade should consider workpiece material, machine rigidity and cutting strategy: when facing interrupted cuts or variable engagement, the T9225 grade offers added toughness; for high-speed, uninterrupted finishing, consider a finer edge preparation or a different grade optimised for speed. Proper clamping, correct seating in the holder and adherence to recommended cutting parameters will extend insert life and improve surface quality. For application-specific recommendations or to order the SCMT09T304 T9225 insert from Tungaloy, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and delivery options Technical data Article number: 6781161-Tungaloy Manufacturer article number: 6781161 Manufacturer SKU: TUN6781161 Brand: Tungaloy Model series: ISO turning indexable inserts Type designation: SCMT09T304 Facts Size: 09 Thickness: 3.97 mm Nose radius: 0.4 mm Relief angle: 7° Included angle: 90° Special features Material: carbide Coating: CVD Grade: T9225 Chipbreaker: single-sided Hole: cylindrical with single-sided countersink (40°–60°) Shape: square Application: turning (external and internal) ISO-compliant insert for standard holders and clamping sets FAQ What materials is this insert intended for? The SCMT09T304 T9225 insert is intended primarily for steel machining; the T9225 grade is a robust universal choice for medium-to-heavy steel turning and variable engagement conditions. How many cutting edges are available per insert? The square design provides four usable cutting edges; the insert can be indexed to present a fresh edge once one becomes worn. What does the 0.4 mm radius affect in turning? A 0.4 mm nose radius balances finish and strength: it improves surface quality compared with a very sharp tip while maintaining sufficient edge strength for typical finishing and medium turning operations. Is the insert compatible with standard ISO holders? Yes, the SCMT09T304 follows ISO seat and form conventions; compatibility depends on matching holder shape, relief angle, tolerance class, clamping and plate thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated cemented carbide, precise geometry and secure clamping for stable, productive milling processes; order directly via Metav Werkzeuge or ask our consultants for application advice. SCMT 09T308 AH120 indexable insert for milling — 0.8 mm radius, 90° — Tungaloy A SCMT09T308-23 AH120 indexable insert designed for Tungaloy milling systems, intended for face, shoulder, slot, high-feed and contour milling where a sharp cutting edge and process security are required PVD-coated carbide AH120 for long tool life Sharp cutting edge for reliable process security 0.8 mm corner radius, 90° geometry Compatible with Tungaloy milling systems Extended tool life through wear-resistant substrate and coating The combination of a PVD-coated surface and a cemented carbide substrate in the AH120 grade delivers enhanced resistance to abrasive wear and chipping. This formulation is engineered to maintain a sharp cutting edge under continuous operation, reducing the frequency of index changes and interruptions. As a result, cycle times remain steady and process reliability improves, which supports predictable production planning and lower per-part machining costs. Geometry tuned for stable cutting and consistent finishes A defined 0.8 mm radius and true 90° geometry, paired with a 7° clearance, stabilises the cutting action and helps maintain a consistent contact zone between insert and workpiece. These geometric parameters contribute to reduced vibration, improved tool engagement and a measurable uplift in surface finish quality. For operations where repeatability matters, the controlled edge form supports uniform part tolerances across batches. Secure clamping and system-matched design for safe machining The insert is delivered with a cylindrical hole and a one-sided countersink (40°–60°), allowing positive seating in compatible cutters and reliable torque transfer via the clamping screw. The 3.97 mm thickness and square plate form (size 09) are designed to fit Tungaloy milling bodies that match the insert seat and geometry. Proper system matching reduces the risk of mounting errors and ensures the mechanical integrity of the toolholding arrangement. Versatile use across common milling operations Designed for a broad range of milling tasks, the grade and geometry make this insert well suited to face milling, shoulder milling, slot milling, high-feed milling and contour milling depending on the assigned cutter family. The wear- and chip-resistant specification supports applications where both a sharp edge and process security are required, enabling reliable performance in series production and mixed-batch environments. Contact Metav Werkzeuge for tailored technical advice and to discuss the Tungaloy SCMT09T308-23 AH120 insert for reliable, productive milling applications Technical Data Article number: 6811412 Manufacturer SKU: TUN6811412 SKU: 6811412-Tungaloy Model series: Milling indexable inserts Facts Insert designation: SCMT09T308-23 Grade/coating: AH120 (PVD-coated) Material: cemented carbide Corner radius: 0.8 mm Geometry angle: 90° Clearance angle: 7° Plate size: 09 Plate thickness: 3.97 mm Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Wear- and chipping-resistant grade for milling Sharp cutting edge for process security Square plate form System requirement: matching insert seat, geometry and milling body Compatible with Tungaloy milling systems FAQ Which milling operations are suitable for this insert? This insert is suitable for face milling, shoulder milling, slot milling, high-feed milling and contour milling when used in the appropriate Tungaloy milling cutter assembly (SCMT09T308-23 AH120). What coating and substrate does the insert use? The SCMT09T308-23 uses a PVD-coated AH120 grade on a cemented carbide substrate to provide wear resistance and reduced chipping during milling. How is the insert clamped in the milling body? The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping; the 3.97 mm plate thickness and correct seat geometry ensure stable mounting and torque support. Is the insert compatible with non-Tungaloy cutters? Compatibility requires that the insert seat, geometry and milling body are technically matched; the part is designed for Tungaloy systems, so verification against the cutter family is necessary before use. What is the SKU and article number for ordering? The product is listed under SKU 6811412-Tungaloy and article number 6811412 (manufacturer SKU TUN6811412). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH6225 carbide, a 0.8 mm corner radius and precise geometry for consistent milling performance; order directly via Metav Werkzeuge or consult the team for compatibility details. SCMT 09T308 AH6225 indexable insert for milling, square form, Tungaloy The SCMT09T308-23 AH6225 is an indexable insert designed for Tungaloy milling systems, suitable for facing, shoulder, slot, high-feed and contour milling where a balanced combination of sharpness and edge stability is required. PVD-coated carbide AH6225 for stainless steels Sharp, stable cutting edge with wide material range 0.8 mm corner radius for precise finishes Square insert with hole and countersink Consistent performance on stainless steels and mixed batches The PVD-coated AH6225 grade is formulated as a universal solution for stainless steels, offering a sharp yet robust cutting edge that tolerates variable cutting conditions. The coating enhances wear resistance and supports a predictable tool life in medium-duty operations, which translates into fewer insert changes and steadier production cycles. For applications that require a balance between surface quality and tool longevity, this grade provides measurable benefits in process stability and productivity. Geometry and clamping that ensure repeatable results The square plate geometry combined with the central cylindrical hole and one-sided countersink (40°–60°) enables secure clamping and exact seat positioning in compatible milling bodies. The 0.8 mm corner radius and 7° relief promote controlled chip formation and reduced vibration in shoulder and contour milling. When the insert is matched to the correct cutter body, the assembly supports repeatable dimension control and a consistent surface finish across batches. Designed for practical productivity and easy integration The insert thickness of 3.97 mm and the ISO designation 09T308 make it compatible with a wide range of Tungaloy milling tool families, provided that seat, geometry and cutter body are technically matched. The integrated chipbreaker 23 assists in chip control during slot and high-feed operations, reducing rework and improving machine uptime. Using an insert engineered for the system reduces set-up time and simplifies tooling logistics in a production environment. Application guidance and suitability Optimised for milling, this plate suits common operations such as planing, shoulder milling, slotting and high-feed contouring, depending on the chosen tool family. The combination of PVD-coated carbide and a square, hole-equipped design is particularly effective when machining stainless steels under varying cutting parameters. Selecting the appropriate cutter body ensures secure clamping and the intended cutting geometry, which together deliver the practical advantages of predictable wear behaviour and steady surface quality. For detailed compatibility checks, cutting parameter recommendations or to place an order for Tungaloy inserts through Metav Werkzeuge, please contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930; the team can advise on matching the insert to the correct milling body and application. Technical data Manufacturer article number: 6829826 SKU: 6829826-Tungaloy Manufacturer SKU: TUN6829826 ISO designation: 09T308 Series: Milling indexable inserts Core dimensions & numbers Radius: 0.8 mm Thickness: 3.97 mm Size designation: 09 Relief angle: 7° Included angle: 90° Chipbreaker: 23 Materials & special features Material: Carbide (Hartmetall) Coating: PVD, grade AH6225 Shape: Square Hole: with hole Hole style: Cylindrical hole + one-sided countersink (40°–60°) Application: Milling Compatibility: Tungaloy milling systems FAQ What materials is this insert suited for? The insert is intended primarily for stainless steels; the PVD-coated AH6225 grade provides a balance of sharpness and edge stability suitable for medium machining tasks. Which tool systems is the insert compatible with? Compatibility requires matching the insert seat, geometry and cutter body; the plate is made for Tungaloy milling systems and fits tool families that accept ISO 09T308 square inserts. How does the chipbreaker affect milling? The integrated chipbreaker 23 improves chip control during slotting and contour milling, which helps maintain surface quality and reduces the risk of re-cutting chips. What is the benefit of the central hole and countersink? The cylindrical hole with a one-sided countersink secures the insert in the cutter body and ensures repeatable seating, contributing to dimensional consistency across production runs. Can this insert be used for high-feed milling? Yes—depending on the chosen cutter body and feed parameters, the insert can be applied in high-feed operations as indicated by the tool family compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated AH6225 grade that balances a sharp, stable cutting edge with good wear resistance for stainless steel milling; the square geometry with a 0.8 mm corner radius and secure clamping design supports reliable chip control and consistent surface finish. Order or request application advice via Metav Werkzeuge for seamless integration into production. SCMT 09T308 AH6225 indexable insert for milling, Tungaloy The SCMT 09T308 AH6225 indexable insert is a PVD-coated carbide grade developed for milling operations in stainless steels and for use in compatible Tungaloy milling systems. PVD-coated carbide grade AH6225 Optimised for stainless steel machining Square insert with 0.8 mm corner radius Compatible with Tungaloy milling systems Consistent cutting performance for stainless steel milling The PVD-coated AH6225 grade combines a sharp yet stable cutting edge with a formulation tuned for moderate machining and variable conditions. This balance reduces flank wear and maintains surface quality over successive passes, which helps to keep production predictable. The coating improves thermal resistance and adhesion, so the insert sustains cutting performance where temperatures and built-up edge can otherwise shorten tool life. As a result, cycle times are stabilised and rework is minimised, supporting higher throughput and lower scrap rates. Geometry and clamping that reduce setup time The square form factor with a 0.8 mm corner radius and a standard 90° orientation is designed to deliver secure seating and repeatable indexing. The insert features a central hole with a cylindrical bore and a single-sided countersink (40°–60°), enabling positive engagement with the cutter body and clamp screw; this arrangement ensures stable holding and reduces micro-movements during heavy cutting. The 7° relief angle provides a compromise between edge strength and clearance, which is especially beneficial when shifting between shoulder, slot and contour operations. Overall, the geometry facilitates straightforward tool assembly and reliable repetition across batches. System compatibility for predictable production This insert is intended for use within Tungaloy milling systems where seat, geometry and cutter body must match technically. When mounted in a matching cutter body, the insert contributes to stable chip formation and predictable machining behaviour across face, shoulder, slot, high-feed and contour milling tasks, depending on the chosen tool family. The result is greater process reliability and easier tool management, as tool inventory can be standardised around compatible inserts and bodies, reducing the number of special holders required on the shop floor. Application guidance for selection and use Select the AH6225 grade when the machining focus is on stainless steel components at medium cutting parameters or where conditions vary between operations. The insert’s PVD coating and carbide substrate are suited to maintain edge integrity under intermittent cuts and varying feeds. Ensure that the cutter body, clamp screw and seat geometry correspond to the insert form to guarantee proper clamping and performance. If edge life needs extending for specific alloys or higher speeds, consider optimising coolant strategy and feed per tooth rather than changing the basic grade immediately. For reliable stainless steel milling with proven process behaviour, contact Metav Werkzeuge about the Tungaloy SCMT 09T308 AH6225 indexable insert — the team can advise on compatible cutter bodies and application settings; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6829869 Our SKU: 6829869-Tungaloy Manufacturer SKU: TUN6829869 Name: SCMT09T308-23 AH6225 Tungaloy indexable insert Facts Insert size: 09 Corner radius: 0.8 mm Plate thickness: 3.97 mm Relief angle: 7° Principal angle: 90° Chipbreaker: 23 Special features Material: carbide (PVD-coated) Geometry: square insert Hole style: cylindrical hole with single-sided countersink (40°–60°) System: for Tungaloy milling systems; seat, geometry and cutter body must match Typical use: face, shoulder, slot, high-feed and contour milling (depending on tool family) FAQ What materials is this insert suitable for? The SCMT 09T308 AH6225 insert is formulated primarily for stainless steel machining and is PVD-coated to resist heat and adhesion typical in those materials. Which tool systems is the insert compatible with? This indexable insert is designed for use in Tungaloy milling systems; correct performance requires a matching seat, insert geometry and cutter body. What are the key dimensions to check before ordering? Verify the insert size (09), corner radius (0.8 mm), plate thickness (3.97 mm) and the hole/countersink style to ensure compatibility with the cutter body. How does the AH6225 grade affect machining? AH6225 offers a balance of a sharp, robust cutting edge and thermal resistance thanks to the PVD coating, making it suitable for medium machining of stainless steel under varying conditions. Is special clamping hardware required? No special hardware is required beyond the matching clamp screw and seat geometry specified by the milling system; the insert features a cylindrical hole with a single-sided countersink for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6235 grade, a 0.8 mm corner radius and a precise 90° geometry for robust milling of demanding materials; order directly via Metav Werkzeuge or consult our application specialists for process-matched integration. SCMT 09T308 AH6235 indexable insert for milling — Tungaloy, PVD-coated cemented carbide, 0.8 mm radius SCMT 09T308 AH6235 is an indexable insert designed for a range of milling operations where chip control and edge stability matter, especially in interrupted cuts and when machining stainless steels. PVD-coated grade AH6235 for tough stainless Square 09 size with 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Compatible with Tungaloy milling systems High-performance grade for interrupted and stainless work The PVD-coated AH6235 grade combines toughness with wear resistance to meet the demands of interrupted cuts and machining of rostfreiem Stahl. This composition reduces the risk of edge breakouts and extends tool life in unstable cutting conditions. The insert’s cemented carbide substrate supports positive cutting forces while the coating maintains edge integrity under thermal and mechanical stress, delivering a reliable balance between tool life and process stability. Geometry and chip control for consistent surface quality A compact square form (size 09) with a 0.8 mm corner radius and the chipbreaker 23 geometry supports predictable chip formation and evacuation. The 90° included angle ensures a robust cutting edge for shoulder and face milling, while the chipbreaker design helps to avoid long, stringy chips that complicate production routines. These geometric choices translate into repeatable surface finishes and reduced secondary operations. Mounting features and system compatibility that simplify setup The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to match clamping screws and seats used in Tungaloy milling systems; correct plate seat, geometry and cutter body must be matched for secure fixation. A plate thickness of 3.97 mm and a free angle of 7° support stable clamping and predictable contact conditions, helping to reduce vibration and maintain consistent cutting parameters across tool changes. Practical benefits for workshop productivity Designed for a broad range of milling tasks — from face and shoulder milling to high-feed and contour operations depending on the assigned cutter family — this insert offers a pragmatic combination of durability and versatility. The tougher grade is specifically recommended for applications with increased breakout risk, which reduces unscheduled downtime and the frequency of regrinds, contributing to a more economical machining process in the long run. For application advice or to secure the SCMT 09T308 AH6235 indexable insert from Metav Werkzeuge, contact our technical sales team or request a matched tooling recommendation today; Metav Werkzeuge provides direct supply and process support for milling systems. Technical data Article number: 6903476-Tungaloy Manufacturer SKU: TUN6903476 Manufacturer article number: 6903476 Model series: Milling indexable inserts Label: SCMT09T308-23 AH6235 Tungaloy indexable insert Material: cemented carbide Coating: PVD AH6235 Application: milling System: for Tungaloy milling systems SKU: 6903476-Tungaloy Numbers / Core technical data Corner radius: 0.8 mm Plate thickness: 3.97 mm Size: 09 Free angle: 7° Included angle: 90° Chipbreaker: 23 Designs / Special features Square plate form Cylindrical hole with one-sided countersink (40°–60°) Tough grade for stainless steels and interrupted cuts Compatible with Tungaloy clamping systems Suitable for face, shoulder, groove, high-feed and contour milling depending on cutter family FAQ What materials is this insert best suited for? The SCMT 09T308 AH6235 indexable insert is optimised for rostfreiem Stahl and other demanding materials where interrupted cuts or high breakout risk occur; the AH6235 grade balances toughness with wear resistance. How does the chipbreaker affect machining? The chipbreaker 23 on this insert improves chip control and evacuation during milling, which supports consistent surface quality and reduces the chance of chip-related interruptions when using the SCMT 09T308 AH6235 insert. Which cutter bodies are compatible with this insert? Compatibility requires matching the insert seat and geometry to Tungaloy milling bodies; the SCMT 09T308-23 form, hole style and recess must correspond to the cutter design for secure clamping. What clamping features does the insert have? The insert is equipped with a cylindrical hole and a one-sided countersink (40°–60°) to suit standard clamping screws used in many Tungaloy milling assemblies. Is this insert suitable for high-feed applications? Depending on the assigned cutter family, the insert can be used for high-feed milling; the robust grade and 90° geometry also support shoulder and face milling duties. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6235 grade and a robust 0.8 mm corner radius to secure dependable performance in stainless steel milling; order directly via Metav Werkzeuge or consult our specialists for application matching. SCMT09T308 AH6235 — SCMT indexable milling insert for milling, Tungaloy The SCMT09T308-23 AH6235 is an indexable milling insert engineered for milling tasks that demand resilience in interrupted cuts and reliable edge stability within stainless steel machining. PVD-coated grade AH6235 for toughness Optimised for stainless steel and interrupted cuts Square 09 format with 90° cutting angle 0.8 mm corner radius for edge strength High toughness for interrupted cutting in stainless steels The PVD-coated AH6235 grade is formulated to provide increased toughness compared with conventional grades. This means the insert resists chipping under fluctuating engagement conditions common in face, shoulder and contour milling. The PVD coating reduces flank wear and improves edge stability, which translates into longer in-service life and fewer index changes. For shops working with stainless steel, the tougher substrate and coating combination helps manage built-up edge and brittle fracture during interrupted cuts, delivering more consistent cycle times and less scrap. Precise geometry for secure seating and repeatable results A correctly matched insert seat and clamping arrangement are central to repeatable performance. The square 09 format and 90° cutting angle ensure a predictable cutting geometry ideal for shoulders and face milling, while the with-hole design with cylindrical hole plus single-side countersink (40°–60°) supports secure clamping and accurate axial positioning. When the insert, toolholder and clamping screw are technically compatible, vibration is minimised and surface finish remains steady across batches. Effective chip control and targeted application scope The integrated chipbreaker (type 23) is optimised to break chips reliably in moderate to heavy engagement conditions, reducing the risk of re-cut and improving evacuation. This chip control, combined with the insert’s toughness, makes the grade suitable for applications such as planing, shoulder milling, slotting where interrupted cuts occur, and high-feed operations depending on the host cutter family. Explaining “chipbreaker”: it is a micro-geometry that shapes chip flow so swarf clears safely rather than entangling, which increases process stability and operator safety. Practical handling to maintain production flow Installation requires that the insert seat, geometry and the milling body match exactly; the system typically comprises the milling body, indexable insert, clamping screw and, where required, a backing shim. Correct seating and consistent clamping pressure are essential to preserve the 0.8 mm corner integrity and the PVD layer. For production environments this reduces downtime for regrinds and minimises unexpected insert failure. For complex stacks or uncertain interfaces, consult technical documentation or request advice to ensure optimal tool life and component compatibility. For machining applications that demand a tough, PVD-coated solution from Tungaloy, contact Metav Werkzeuge for application matching and order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6890185 SKU: 6890185-Tungaloy Model designation: SCMT09T308-23 Type: Indexable milling insert Material: Carbide (PVD-coated, AH6235) Manufacturer: Tungaloy Core specifications Insert size: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Cutting angle: 90° Chipbreaker: 23 Hole: with hole (cylindrical + countersink 40°–60°) Special features Square insert form Suited for stainless steel and interrupted cuts Requires matching Tungaloy milling body and clamping screw Part of a modular indexable milling system PVD coating for improved edge stability (AH6235) FAQ Which materials is this insert suited for? The SCMT09T308-23 AH6235 insert is optimised for stainless steel and other materials that demand increased toughness, particularly where interrupted cuts or increased breakout risk are present. For which milling operations is this grade recommended? This insert is intended for face, shoulder, slot and high-feed milling operations that benefit from a square 09 insert with a 90° cutting angle and robust chip control. How must the insert be mounted for safe operation? The indexable insert requires a compatible Tungaloy milling body, correct seat geometry and a clamping screw; the cylindrical hole with single-side countersink secures axial and radial positioning for dependable clamping. What does the AH6235 designation mean for performance? AH6235 denotes a tougher, PVD-coated carbide grade developed to withstand interrupted cutting and reduce edge chipping in demanding stainless steel machining. Is the SCMT insert compatible with non-Tungaloy toolholders? Performance depends on the exact match between insert seat geometry and the toolholder. The SCMT09T308-23 is designed for Tungaloy milling systems; using alternative holders requires verification of seat, clamping method and dimensions to ensure safety and repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 AH725 23 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 grade and a secure clamping design to increase process reliability and tool life in milling operations; order genuine Tungaloy indexable inserts directly via Metav Werkzeuge or consult our specialists for application guidance. SCMT09T308 AH725 SCMT indexable insert for milling — Tungaloy SCMT09T308-23 AH725 Tungaloy indexable insert designed for Tungaloy milling systems, offering universal chip-resistant performance for a wide range of steels and rostfreie Stähle in general milling tasks PVD-coated AH725 grade for process reliability Universal, chip-resistant on steel and stainless steel Square 09 form with 0.8 mm corner radius Cylindrical hole with single-side countersink Consistent machining with a wear-resistant coating The PVD-coated AH725 grade provides a balanced combination of toughness and wear resistance that is particularly effective for mixed-material production. As a carbide insert with a robust microstructure, it maintains cutting-edge stability in interrupted cuts and variable feed conditions. This results in reduced flank wear and a more predictable tool life, which supports higher machine uptime and lower tooling costs per component. The coating also helps to maintain surface finish under elevated process demands. Secure clamping and geometry for repeatable accuracy A square 09 form with a 0.8 mm corner radius and a 3.97 mm plate thickness ensures stable seating in compatible cutters. The cylindrical hole with a single-side countersink (40°–60°) provides secure clamping and repeatable indexability, minimising micro-movements that can degrade surface quality. Combined with the standard 7° clearance and a 90° insert angle, the geometry supports reliable face and shoulder milling, delivering consistent dimensional control in serial production. Optimised chip control and application range The integrated chipbreaker 23 is adapted to promote controlled chip formation in a broad application spectrum, including finishing and higher feed operations. This insert is specified for general milling tasks and is particularly suitable when changing workpiece materials is common; the material and geometry emphasise process security over specialised extremes. As part of a matched milling system, the insert helps to reduce the risk of built-up edge and workpiece damage, enabling stable cycle times and fewer interruptions. Practical compatibility and system notes Engineered as part of a Tungaloy milling system, the insert requires cutter bodies with matching seat and geometry to exploit its full capability. The designation indicates form and seat compatibility; when combined with appropriately rated cutters and clamping screws, the package supports efficient planing, shoulder and contour milling operations. The insert’s universal character makes it a pragmatic choice for job shops and production lines that need flexibility without sacrificing repeatability. Contact Metav Werkzeuge to request genuine Tungaloy inserts, discuss optimal cutter bodies for this grade or receive application-specific recommendations; Metav Werkzeuge can be reached at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6856713 Manufacturer SKU: TUN6856713 SKU: 6856713-Tungaloy Model series: milling indexable inserts Material: carbide Facts Corner radius: 0.8 mm Thickness: 3.97 mm Clearance angle: 7° Insert angle: 90° Size: 09 Hole style: cylindrical + single-side countersink (40°–60°) Special features Coating: PVD, grade AH725 Chipbreaker: 23 Shape: square With hole Intended use: milling Suitable for steel and rostfreie Stähle Plattensitz, geometry and cutter body must match for system compatibility FAQ Is this insert suitable for stainless steels? The SCMT09T308-23 AH725 Tungaloy indexable insert is formulated for use on steel and stainless steels; the AH725 grade offers enhanced resistance to chipping and preserves edge life under mixed-material conditions. Which cutter bodies fit this insert? The insert requires milling cutter bodies compatible with the SCMT09T308 seat and square 09 form; ensure seat geometry and clamping method match the insert designation and the cutter manufacturer’s specifications. What does the chipbreaker 23 provide? Chipbreaker 23 on this insert promotes controlled chip formation in a range of feeds, improving evacuation and reducing the likelihood of built-up edge during continuous milling. How does the PVD coating benefit production? The PVD-coated AH725 surface improves wear resistance and thermal stability, delivering more consistent tool life and enabling stable cycle times in serial milling tasks. Can this insert be used for high-feed operations? When paired with a suitable cutter and appropriate cutting parameters, the insert’s geometry and chip control permit higher-feed strategies while maintaining surface quality and repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 AH725 Wendeplatten - Tungaloy
High process reliability with a PVD-coated AH725 carbide grade for versatile machining and a precise 0.8 mm corner radius on a 90° square geometry — order the insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT 09T308 AH725 milling insert – Tungaloy (SCMT09T308-23) The SCMT09T308-23 AH725 Tungaloy insert is a PVD-coated carbide indexable insert for milling, designed for versatile operations on Stahl and rostfreier Stahl within compatible Tungaloy milling systems. PVD-coated AH725 carbide Universal for Stahl and rostfreier Stahl Square 09 size, 90° with 0.8 mm radius Cylindrical hole with single-side countersink Consistent cutting performance for mixed-material production The combination of a PVD-coated, AH725 carbide substrate and a chipformer suited to wide material ranges delivers a reliable cutting effect in mixed-production environments. This grade is formulated to resist chipping and maintain edge stability during interrupted cuts, which means the insert provides process security when alternating between Stahl and rostfreier Stahl. By choosing a wear-resistant indexable insert, setup frequency is reduced and component consistency improves, which supports predictable cycle outcomes in series production. Practical geometry and attachment that reduce setup time A square, 09-size plate with a 90° included angle and a 0.8 mm corner radius creates a familiar, robust profile for shoulder and face milling. The plate includes a cylindrical hole with a single-side countersink (40°–60°) for positive clamping and straightforward positioning in the cutter body. The moderate clearance angle helps balance edge strength and chip flow, making the insert suitable for diverse tasks such as planing, shoulder milling and contouring. Clear, standardised geometry simplifies tool management and replacement in established Tungaloy bodies. Application scope and compatibility with Tungaloy systems Engineered for use in Tungaloy milling systems, the insert matches required plate seats, geometries and cutter bodies when correctly selected. The carbide construction and PVD finish support a broad workshop use case: general milling, high-feed applications depending on the assigned cutter family, and operations demanding repeatable surface quality. While optimised for Stahl and rostfreier Stahl, the grade’s universal characteristics make it a pragmatic choice for workshops handling variable parts and smaller cutters where process stability is critical. Contact Metav Werkzeuge for application advice, availability and to request a quotation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6856784 Manufacturer SKU: TUN6856784 SKU: 6856784-Tungaloy Model series: Fräswendeschneidplatten Designation: SCMT09T308-23 Facts Thickness: 3.97 mm Plate size: 09 Corner radius: 0.8 mm Clearance angle: 7° Included angle: 90° Special features Material: carbide Coating: PVD (AH725) Plate shape: square Hole: cylindrical with single-side countersink (40°–60°) Chipbreaker: 23 Application: milling (planing, shoulder, groove, high-feed, contour depending on cutter family) Suitable workpiece materials: Stahl, rostfreier Stahl Designed for use in Tungaloy milling systems FAQ What materials is this insert designed for? The SCMT09T308-23 AH725 insert is specified for machining Stahl and rostfreier Stahl and is developed as a universal, breakout-resistant grade for variable workpiece mixes. Which tool bodies accept this plate? The insert fits cutter bodies that are technically matched to the SCMT seat and 09-size geometry; correct plate seat, geometry and cutter body must be compatible for safe clamping. What does the AH725 designation mean for performance? AH725 denotes a PVD-coated carbide grade optimised for process security and reduced chipping risk on a broad range of steels, offering good edge stability in interrupted cuts. How does the 0.8 mm corner radius affect results? A 0.8 mm radius provides a balance between edge strength and surface finish, improving robustness on shoulders while delivering acceptable surface quality on general milling tasks. Is the insert suitable for high-feed milling? Use in high-feed applications depends on the allocated cutter family; the model series supports high-feed setups when the associated cutter and parameters are appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 AT9530 Wendeplatten - Tungaloy
Data inconsistency detected: the material is specified both as "cemented carbide" and as "coated cermet", which raises concerns about the accuracy and reliability of the provided information, as these two materials have distinct properties, compositions, and applications, making it essential to clarify whether the intended material is indeed cemented carbide, known for its hardness and wear resistance, or coated cermet, which typically combines ceramic and metallic elements for enhanced performance in specific conditions, and such discrepancies could lead to misunderstandings or errors in processes where precise material identification is critical, highlighting the importance of resolving this inconsistency promptly to ensure proper documentation and usage.
SCMT 09T308 GT9530 Wendeplatten - Tungaloy
Benefit from the GT9530 coated cermet for consistent finishing quality and the robust square geometry with a 0.8 mm corner radius for dependable performance in stable milling conditions. Combine longer tool life and reliable chip control for efficient production. Order the SCMT09T308-23 directly via Metav Werkzeuge or consult our specialists for compatibility and cutting-data advice. SCMT 09T308 GT9530 – Tungaloy indexable insert for milling, coated cermet, with hole The SCMT09T308-23 GT9530 is a square, coated cermet indexable insert designed for precision finishing and light universal milling within Tungaloy milling systems Coated cermet grade GT9530 Designed for finishing and light universal milling Square insert, 3.97 mm thickness, 0.8 mm radius Cylindrical hole with 40°–60° single-sided countersink Maximise surface quality with a wear-resistant cermet grade The GT9530 coated cermet provides a balanced combination of wear resistance and edge integrity, making it an economical choice for finishing passes and light universal milling of steel. The coating stabilises the cutting edge under constant conditions, which helps to maintain a consistent surface finish over longer cutting times. For production environments where repeatability and lower rework rates matter, this grade reduces downtime by extending tool life and by limiting edge degradation during typical finishing cycles. Stable geometry for repeatable clamping and accurate results The insert's square form and precise dimensions – 3.97 mm thickness, size 09, and 0.8 mm corner radius – ensure secure seating and geometry repeatability in compatible tool bodies. The 7° relief angle and the 90° included edge angle support predictable engagement in shoulder and contour milling, while the cylindrical hole with single-sided countersink (40°–60°) provides reliable clamping and alignment. These geometric details translate into stable cutting conditions, reduced vibration and improved dimensional consistency part-to-part. Practical application scope and process advantages Equipped with chipbreaker 23, the insert improves chip control during finishing cuts, reducing the risk of built-up edge and promoting steady evacuation in medium-feed operations. The combination of carbide substrate and cermet coating is particularly suited to job shops and milling departments that prioritise high-quality finishes on steel components under stable cutting regimes. For adaptation into existing tool families, ensure that the insert seat, geometry and clamping screw match the tool holder; when matched correctly, the result is higher productivity and fewer index changes per shift. If further cutting parameters or material-specific advice are required, technical data and support are available. For tailored advice on integrating GT9530 inserts into Tungaloy milling systems or to request compatible items from Metav Werkzeuge, contact our specialists at Metav Werkzeuge for expert recommendation and cutting-data guidance. Technical data Article number: 6998345 SKU: 6998345-Tungaloy Manufacturer SKU: TUN6998345 Item designation: SCMT09T308-23 GT9530 Model series: Milling indexable inserts Material: carbide Grade: GT9530 Chipbreaker: 23 Application: milling Facts Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 90° Size: 09 ISO code: 09T308 Manufacturer article number: 6998345 Special features Coated cermet grade GT9530 Suitable for steel finishing and light universal milling Square plate form Cylindrical hole with single-sided countersink (40°–60°) Designed for use in Tungaloy milling systems Requires matching plate seat and clamping geometry FAQ What materials is this insert intended for? The SCMT09T308-23 GT9530 insert is optimised for steel machining, particularly for finishing and light universal milling operations where a good surface finish and extended life are required. Which toolholders are compatible with this square insert? Compatibility depends on matching the insert seat and clamping system; the SCMT09T308-23 is intended for Tungaloy milling systems with the corresponding seat geometry and clamping screw configuration. How does chipbreaker 23 affect performance? Chipbreaker 23 is configured to improve chip control during finishing cuts, promoting smoother evacuation and helping to prevent built-up edge, which contributes to more consistent surface quality. What cutting tasks is this grade best for? GT9530 is a wear-resistant cermet grade suited to precision finishing and light universal milling of steel under stable process conditions, where surface integrity and longer tool life are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise surface finish, low cutting forces and straightforward compatibility with Tungaloy milling systems for efficient finishing operations. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. SCMT 09T308 NS9530 indexable insert for milling — Tungaloy The SCMT 09T308 NS9530 indexable insert is a cermet finishing grade designed for precision milling applications, offering a sharp cutting edge and stable performance in continuous cutting with small depths of cut. Cermet grade NS9530 for fine finishing Sharp cutting edge for low cutting forces 0.8 mm corner radius for fine surface quality Cylindrical hole with 40°–60° countersink Delivering consistently high surface quality and low cutting forces The insert is manufactured as an uncoated cermet finishing grade (NS9530) that combines a sharp cutting edge with low thermal sensitivity. This results in reduced cutting forces and improved component finish compared with tougher, general-purpose grades. For operators seeking reliable cosmetic and dimensional quality on ferrous components, the combination of a fine cermet substrate and razor-like geometry ensures a high surface finish with minimal secondary machining. The design is particularly effective for continuous cutting passes and small step-over strategies, where stability of the cutting edge directly affects cycle time and scrap rates. Precise geometry and secure seating for repeatable results The insert's geometry — a square 09 format with a 0.8 mm corner radius and a 7° relief angle — is optimised for controlled chip formation and predictable engagement with the workpiece. A cylindrical mounting hole with a single-sided countersink (40°–60°) ensures positive location and clamping on compatible cutter bodies; insert seat, geometry and cutter body must match technically for safe operation. The plate thickness of 3.97 mm and the 90° included angle provide mechanical stability while maintaining accessible cutting edge clearance. These features reduce vibration and enable repeatable results part-to-part on medium-precision milling machines. Application-focused economy and process guidance This uncoated cermet is intended as a dedicated finishing solution for steel components and is best employed with modest depths of cut and continuous feed to exploit its low-friction edge. Typical uses include face milling, shoulder milling, slotting, high-feed and contour operations depending on the assigned tool family. The insert's chipformer code (23) supports steady chip evacuation in applicable conditions. From a cost-efficiency perspective, reduced rework and longer intervals between edge changes contribute to a favourable total cost of ownership, particularly in high-mix batch production where surface quality is critical. For process setup, prefer stable fixturing and conservative entry conditions to protect the sharp edge and sustain the advantageous surface results. Contact Metav Werkzeuge today for tailored advice on Tungaloy cermet finishing inserts and secure optimal milling performance with the SCMT 09T308 NS9530. Technical data Article number: 6998494 Manufacturer SKU: TUN6998494 Label: SCMT09T308-23 NS9530 Tungaloy-Wendeplatte Model series: Fräswendeschneidplatten Core specifications Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Size: 09 Included angle: 90° Features & applications Grade: NS9530 (uncoated cermet) Material: cemented carbide Chipbreaker: 23 Hole: with cylindrical hole + single-sided countersink (40°–60°) Shape: square Typical application: milling (face, shoulder, slot, high-feed, contour) System components: cutter body, indexable insert, clamping screw, backing pad (as applicable) Note: Insert seat, geometry and cutter body must match technically FAQ What materials is this insert best suited for? The SCMT 09T308 NS9530 insert is designed as a finishing grade primarily for steel; its uncoated cermet composition provides a sharp edge and low cutting forces suitable for continuous finishing cuts. How does the 0.8 mm corner radius affect machining results? A 0.8 mm corner radius gives a balance between edge strength and surface quality, enabling fine finishes while maintaining sufficient robustness against edge chipping during finishing passes with the SCMT 09T308 NS9530. Is this insert compatible with all Tungaloy milling systems? Compatibility requires matching the insert seat, geometry and cutter body. The SCMT 09T308-23 format is intended for Tungaloy systems that accept square 09 inserts with the specified hole and countersink style. What is the purpose of the cylindrical hole with countersink? The cylindrical hole plus single-sided countersink (40°–60°) ensures precise axial and radial positioning and secure clamping on compatible cutter bodies, improving repeatability and safety during milling. Which machining strategies best exploit this insert’s strengths? Continuous cutting with small depths of cut and stable feed rates will best exploit the sharp cermet edge of the SCMT 09T308 NS9530, delivering superior surface finish and reduced need for secondary operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting edge, low cutting forces and consistent geometry for reliable finishing results; order the insert directly via Metav Werkzeuge or consult the team for tailor-made machining advice. SCMT 09T308 NS9530 indexable insert for milling — Tungaloy The SCMT 09T308 NS9530 is a cermet indexable insert engineered for finishing applications in milling, optimised for continuous cuts and small depths. Cermet finishing grade NS9530 for steel Sharp cutting edge for high surface quality Square insert with 0.8 mm corner radius Compatible with Tungaloy milling systems Optimised finishing performance for steel components The uncoated cermet grade NS9530 is developed as a finishing material for steels, delivering a sharp cutting edge, low cutting forces and a high surface finish. These characteristics reduce the need for secondary operations by producing consistently fine surfaces during continuous cutting and small-depth passes. The result is improved component quality and fewer rejects in series production, while the reduced cutting forces help to limit tool deflection and maintain dimensional accuracy. Precision geometry for repeatable results and secure clamping The insert’s square geometry with a 0.8 mm corner radius and an included angle of 90° provides reliable edge strength and predictable contact conditions at the tool–workpiece interface. The specified 7° relief angle supports stable cutting and reduces rubbing at small depths of cut. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping in compatible tool bodies, ensuring repeatable seating and minimised runout across index changes, which contributes to steady component tolerances and process stability. System compatibility and application versatility for efficient milling Designed for integration into Tungaloy milling systems, the insert forms part of a modular tool assembly that includes the milling body, clamping screw and, where applicable, a support washer. Typical uses include plan, shoulder, slot, high-feed and contour milling, depending on the selected tool family. The uncoated cermet composition and fine edge hone make this grade particularly suitable where surface integrity and low cutting loads are priorities, offering a balance between productivity and finish quality in finishing operations. For precise finishing with Tungaloy quality, contact Metav Werkzeuge for personalised advice or to place an order via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998499 SKU: 6998499-Tungaloy Manufacturer SKU: TUN6998499 Designation: SCMT09T308-23 NS9530 Core data Corner radius: 0.8 mm Insert size: 09 Thickness: 3.97 mm Included angle: 90° Relief angle: 7° Chipbreaker: 23 Special features Material: uncoated cermet grade NS9530 Substrate: Hartmetall Shape: square With hole and one-sided countersink (40°–60°) Application: milling Series: milling indexable inserts Use: finishing cuts, continuous cutting, small depths FAQ What materials is the insert suitable for? The SCMT 09T308 NS9530 insert is a finishing-grade cermet intended primarily for steel machining, optimised for continuous cuts and small depths to achieve high surface quality. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius balances edge strength and surface finish: it reduces edge chipping risk while helping to maintain a fine finished surface in finishing passes with the Tungaloy insert. Which milling operations are typical for this insert? Typical operations include plan, shoulder, slot, high-feed and contour milling when used in the appropriate Tungaloy milling tool family and body. Is the insert compatible with other tool systems? The insert is intended for use in Tungaloy milling systems and requires matching seat geometry, clamping screw and, if needed, a support washer for correct assembly. What does the insert’s hole and countersink provide? The cylindrical hole with a one-sided countersink (40°–60°) enables secure clamping and precise seating, which helps to reduce runout and maintain repeatable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of the NS9530 uncoated cermet for superior surface finish and low cutting forces, together with the 90° square geometry and a 0.8 mm corner radius for precise shoulder and face milling; order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. SCMT 09T308 NS9530 – Tungaloy milling indexable insert for finishing applications SCMT 09T308 NS9530 offers a finishing-grade solution for milling steel with a sharp cutting edge and low cutting forces, designed for use in compatible Tungaloy milling systems Precision finishing grade NS9530 for steel Square 90° geometry for shoulder and face milling 0.8 mm corner radius for repeatable edge stability Cylindrical hole with single-sided countersink (40°–60°) High-precision finishing for steel components The insert is manufactured as a finishing-grade solution using the NS9530 uncoated cermet substrate, delivering a consistently fine surface quality on steel. The combination of a sharp cutting edge and low cutting forces reduces vibration during light-steel machining, which directly benefits surface integrity and reduces secondary finishing. Compatibility with the matching milling body and correct clamping is essential to obtain the intended performance; the insert is intended for applications where small depths of cut and continuous cutting produce the best results. Geometry engineered for repeatable shoulder and face milling A 90° square form factor provides precise corner definition for shoulder and face operations, while the 0.8 mm corner radius balances edge strength with the capacity to produce tight, repeatable profiles. The moderate thickness of 3.97 mm and the square format enable stable seating in the pocket and predictable load distribution under finishing conditions. The cylindrical centre hole with a single‑sided countersink (40°–60°) secures positive clamping and repeatable axial positioning in the cutter body, supporting consistent part-to-part accuracy. Chip control and cutting behaviour optimised for continuous cuts Equipped with chipbreaker 23, the insert is tailored for continuous cutting and small depth-of-cut strategies typical of finishing cycles. The chipbreaker geometry promotes slender, controllable chips and prevents re-cutting, which helps maintain low cutting forces and preserves the integrity of the sharp cermet edge. The controlled chip flow also contributes to a superior surface texture and reduces the risk of material build-up on the cutting edge during longer runs. System compatibility and safe clamping for predictable results This insert is designed for use in Tungaloy milling systems where the insert seat, geometry and cutter body match technically. Correct selection of clamping screw and underlay—where applicable—ensures secure fixation; the insert’s central hole and countersink arrangement facilitate reliable axial and radial location. For best results, select the correct cutter family and verify seat geometry before assembling; this guarantees the insert works within its intended mechanical and thermal envelope. When to choose this insert and expected benefits Choose this insert where high surface quality and low cutting forces are priorities—typical uses include face milling, shoulder milling, slotting and contouring in steel when using finishing parameters. The uncoated cermet substrate excels at producing fine finishes and consistent part tolerances under continuous feeds and small feed per tooth. By matching the insert to an appropriate cutter body and machining strategy, process stability and repeatability are improved, contributing to reliable series production. Contact Metav Werkzeuge for an application review of the Tungaloy SCMT 09T308 NS9530 finishing insert or to request technical data and sample availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998490 SKU: 6998490-Tungaloy Manufacturer SKU: TUN6998490 Model series: Fräswendeschneidplatten Core measurements Insert designation (ISO): 09T308 Corner radius: 0.8 mm Thickness: 3.97 mm Insert size: 09 Angle: 90° Clearance angle: 7° Hole: with hole Special features Substrate / cutting material: uncoated cermet, NS9530 Material body: carbide Chipbreaker: 23 Hole style: cylindrical hole with single-sided countersink (40°–60°) Typical application: face, shoulder, slot, high-feed and contour milling depending on tool family FAQ What materials is this insert intended for? The SCMT 09T308 NS9530 insert is specified as a finishing-grade uncoated cermet designed primarily for machining steel in finishing operations. Which milling operations suit this insert best? The insert is suited to face milling, shoulder milling, slotting and contouring where small depths of cut and continuous feeds are applied to achieve a high-quality surface finish. How does chipbreaker 23 influence performance? The chipbreaker 23 promotes controlled chips in continuous cutting, improving surface finish and reducing cutting forces, which is particularly beneficial during finishing passes with the NS9530 substrate. What must be checked before fitting the insert to a cutter body? Ensure that the insert seat, geometry and cutter body match technically; confirm the correct clamping screw and underlay if required to guarantee secure, repeatable seating and axial alignment. Is the insert suitable for interrupted cuts or heavy roughing? This insert is optimised for finishing and continuous cutting; for heavy roughing or heavily interrupted cuts, a different grade or geometry would be recommended to maintain tool life and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 T505 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated T505 carbide for economical cast‑iron machining, a 0.8 mm corner radius for robust edge life and a secure cylindrical hole with 40°–60° countersink for reliable clamping; order directly via Metav Werkzeuge or consult our specialists for application matching. SCMT 09T308 T505 indexable insert for milling – Tungaloy The SCMT 09T308 T505 is a square indexable insert designed for milling applications, optimised for cast‑iron machining within Tungaloy milling systems. Square insert, 09 size, 90° cutting edge CVD‑coated T505 grade for cast iron Corner radius 0.8 mm for robust edge life Cylindrical hole with 40°–60° countersink High‑efficiency cast‑iron machining with predictable results The CVD‑coated T505 grade, applied to a cemented carbide substrate, is selected for the economical machining of cast iron, emphasising stable chip formation and process reliability. The coating improves resistance to abrasion and thermal loading, so cutting parameters can be set for productive material removal without frequent index changes. As a result, cycle times stabilise and tool change intervals extend, supporting continuous production runs where reproducible output matters. Secure clamping and system compatibility for consistent accuracy Designed for use in Tungaloy milling systems, the insert features a cylindrical hole with a one‑sided countersink (40°–60°) to ensure positive seating and repeatable clamping force. Correct seat geometry and a matching clamp screw are essential; the insert must be mounted in a compatible cutter body to achieve the specified cutting geometry and maintain concentricity. This mechanical compatibility reduces vibration and improves surface finish during shoulder and contour milling operations. Robust cutting edge and chip control for longer service life With a corner radius of 0.8 mm and a dedicated chipbreaker 23, the geometry balances edge strength and chip evacuation for interrupted or stable cuts. The 90° main cutting edge and a plate thickness of 3.97 mm contribute to rigidity at the cutting zone, reducing the risk of edge chipping under moderate interruptions. The square form provides four usable edges per indexable insert, supporting economical edge utilisation and straightforward re‑indexing during maintenance. Practical benefits that support process stability and economy This insert is optimised for planing, shoulder, slotting, high‑feed and contour milling depending on the assigned tool family, allowing one insert type to cover multiple machining tasks. The combination of coating, carbide substrate and geometry supports an efficient balance between tool life and productivity, making the component suitable for production environments requiring consistent part quality. Where doubts about compatibility or process setup arise, technical consultation helps to align insert selection with machine capability and workpiece requirements. Contact Metav Werkzeuge for tailored application advice on Tungaloy indexable inserts and to receive precise compatibility recommendations; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6831845 Manufacturer: Tungaloy SKU: 6831845-Tungaloy Manufacturer SKU: TUN6831845 Model series: Milling indexable inserts Designation: SCMT09T308-23 Facts Corner radius: 0.8 mm Thickness: 3.97 mm Insert size: 09 Cutting angle: 90° Clearance angle: 7° Countersink angle: 40°–60° Chipbreaker: 23 Special features CVD‑coated cemented carbide, grade T505 Application: Milling, suitable for cast iron Shape: Square Hole: cylindrical hole with single‑sided countersink System requirement: compatible Tungaloy milling body and clamping screw Part of a modular milling insert system for shoulder, slot and contour milling FAQ Is this insert suitable for machining cast iron? Yes. The SCMT 09T308 T505 insert uses a CVD‑coated T505 grade cemented carbide designed specifically for economical and stable machining of cast iron. What clamping arrangement does the insert require? The insert has a cylindrical hole with a one‑sided countersink (40°–60°); it must be mounted in a compatible Tungaloy milling body with the correct clamp screw and seat geometry to ensure secure fastening. Which machining tasks is this insert intended for? This square insert suits planing, shoulder, slotting, high‑feed and contour milling operations depending on the assigned tool family and cutter body used. How does the chipbreaker 23 influence performance? The chipbreaker 23 promotes controlled chip formation and evacuation, improving stability during interrupted cuts and contributing to consistent surface quality. How many cutting edges are available per insert? The square form provides multiple index positions; each insert offers several usable edges, enabling economical re‑indexing during production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 T5115 Wendeplatten - Tungaloy
Take advantage of the T5115 grade’s balance of wear resistance and edge stability together with the insert’s secure clamping features for steady, productive milling of cast iron; order or consult Metav Werkzeuge for application guidance or availability. SCMT 09T308 T5115 SCMT — indexable milling insert for milling (Tungaloy) The SCMT09T308-23 T5115 Tungaloy insert is an indexable milling insert intended for plan, shoulder, slot, high-feed and contour milling within compatible Tungaloy milling systems. CVD-coated carbide for cast iron machining Square form with 0.8 mm corner radius Cylindrical hole with 40°–60° countersink 90° insert angle and 7° relief Reliable performance on cast iron components The CVD-coated T5115 cutting grade is designed as a universal grade for cast iron, offering an even balance between wear resistance and edge stability. This combination reduces flank wear and helps maintain a consistent cutting edge under interrupted or continuous cuts, which supports longer tool life and fewer index changes. For applications such as face, shoulder or slot milling, the result is an improved surface quality and predictable machining behaviour without complex parameter changes. Stable clamping and repeatable geometry for process security The insert’s square form with a 0.8 mm corner radius and a central cylindrical hole with a single-sided countersink (40°–60°) ensures reliable seating in the cutter body; consistent positioning reduces vibration and enhances repeatability. The 90° included angle and 7° relief are geometry choices that favour rigidity and chip formation control during shoulder and face milling. Correct matching of insert seat, geometry and cutter body is essential to exploit these benefits and to maintain a stable machining process. Practical benefits for productivity and tool management Using this indexable insert within a matched milling system enables quick index changes and straightforward inventory handling, which contributes to machine uptime. The CVD-coated carbide substrate provides excellent thermal stability during higher cutting speeds, supporting efficient material removal rates. Stable chip formation under the insert’s chipbreaker 23 further reduces the risk of re-cutting chips and helps maintain consistent feeds and speeds for productive cycle times. For specific application advice, availability or to discuss SCMT09T308-23 T5115 compatibility with existing cutters, please contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and fast supply. Technical data Article number: 6864773 Manufacturer item number: 6864773 SKU: 6864773-Tungaloy Manufacturer SKU: TUN6864773 Designation: SCMT09T308-23 Grade: T5115 Material: carbide Measured values Corner radius: 0.8 mm Thickness: 3.97 mm Included angle: 90° Relief angle: 7° Size: 09 Features Shape: square Hole: with cylindrical hole and single-sided countersink (40°–60°) Chipbreaker: 23 Coating/type: CVD-coated carbide (T5115) Typical use: milling (plan, shoulder, slot, high-feed, contour) System: for Tungaloy milling systems (matching seat and geometry required) FAQ What materials is this insert suitable for? The SCMT09T308-23 T5115 insert is formulated as a universal grade for cast iron applications, delivering balanced wear resistance and good edge stability when machining grey and nodular cast irons. Which cutter bodies are compatible with this insert? Compatibility requires a cutter body designed for SCMT-type inserts; the insert seat, clamping method and geometry must match the SCMT09T308-23 form to ensure secure clamping and correct cutting angles. How does the T5115 grade affect cutting performance? The T5115 CVD-coated carbide provides improved thermal resistance and robust edge life, which allows higher cutting speeds and steady performance in demanding cast iron milling tasks. What is the benefit of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge strength compared with sharper radii, improving resistance to chipping during interrupted cuts while still delivering an acceptable surface finish for many milling operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 T515 Wendeplatten - Tungaloy
High productivity and reliable chip control from the T515 CVD-coated carbide grade combine with the square 09 geometry and 0.8 mm corner radius to deliver economical, repeatable milling of cast iron. Order the SCMT09T308-23 T515 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT 09T308 T515 – Tungaloy indexable milling insert for milling (square 09, R0.8) A SCMT 09T308 T515 indexable milling insert engineered for efficient face, shoulder and contour milling within Tungaloy milling systems. CVD-coated carbide grade T515 Designed for cast iron machining Square 09 insert with 0.8 mm radius Cylindrical hole with single-sided countersink Consistent performance for cast iron machining The combination of a CVD-coated surface and the T515 carbide grade ensures stable cutting when machining cast iron, with optimised chip formation and extended useful life in interrupted cuts. The coating reduces adhesion and thermal load at the cutting edge, which leads to more predictable wear behaviour and fewer unscheduled tool changes. By choosing an insert engineered for the workpiece class, production runs achieve higher uptime and a better cost-per-part ratio. Precision geometry for reproducible results A defined geometry—square 09 format with a 0.8 mm corner radius and a 7° relief angle—provides a balance between edge strength and surface finish. The 90° cutting angle supports robust face and shoulder operations while the 3.97 mm plate thickness maintains rigidity under load. The insert’s cylindrical hole with single-sided countersink (40°–60°) requires a matching seat and clamping arrangement on the milling body to guarantee repeatable positioning and clamping force; correct system pairing reduces vibration and secures dimensional consistency. System compatibility and process benefits This insert is designed as one component within a complete milling system: milling body, insert, clamping screw and, where required, a shim. The modular concept supports a range of tasks—from planing and shoulder work to slotting, high‑feed and contour milling—depending on the chosen tool family. Using a purpose-made insert grade for cast iron enables economical machining through longer tool life and stable cutting conditions, while system conformity enhances process reliability and simplifies tool management. For tailored recommendations on geometry, grade selection and integration of Tungaloy inserts, contact Metav Werkzeuge for application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6747830 Manufacturer SKU: TUN6747830 SKU: 6747830-Tungaloy Type designation: SCMT09T308-23 Brand: Tungaloy Core specifications Corner radius: 0.8 mm Relief angle: 7° Plate thickness: 3.97 mm Insert size: 09 Insert shape: square Cutting angle: 90° Countersink angle: 40°–60° Grade: T515 Features & applications CVD-coated carbide Suitable for cast iron machining Cylindrical hole with single‑side countersink Typical uses: face, shoulder, slot, high‑feed and contour milling System components: milling body, insert, clamping screw, shim Requires matching insert seat and milling body geometry FAQ Which materials is this insert best suited for? The SCMT09T308-23 T515 insert is optimised for machining cast iron; the T515 grade and CVD coating favour stable chip control and economical performance on grey and nodular cast irons. What is the corner radius and how does it influence machining? The insert has a 0.8 mm corner radius which increases edge strength and improves surface integrity while supporting moderate finishing passes. Can this insert be used in different milling bodies? The insert requires a matching seat and clamping geometry; use only milling bodies specified for the SCMT 09T308 family to ensure correct fit and repeatable clamping. What coating and carbide type does the insert use? This item is a CVD-coated carbide insert in grade T515, selected for economical and productive cast iron machining. How is the insert secured in the tool? The insert is fixed with a clamping screw and may use an underlay shim; the design includes a cylindrical hole with a single-sided countersink for secure seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 T6215 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade and a 0.8 mm corner radius delivers stable chip formation and extended tool life for demanding milling tasks. Compatible with Tungaloy milling systems and defined clamping geometry, the insert supports repeatable process results — order directly via Metav Werkzeuge or consult our specialists for application advice. SCMT 09T308 T6215 milling insert — Tungaloy The SCMT09T308-23 T6215 milling insert provides a wear-resistant, indexable solution for a wide range of milling operations where consistent chip control and long tool life are required. SCMT 09T308 T6215 insert by Tungaloy CVD-coated carbide for wear resistance 0.8 mm corner radius for precise chamfers Compatible with Tungaloy milling systems High process reliability through optimized coating and grade The CVD-coated carbide composition of this grade, designated T6215, is engineered for wear resistance when machining rostfreier Stahl under stable to slightly interrupted cutting conditions. The coating forms a hard, thermally stable layer that reduces flank wear and maintains the cutting-edge geometry for longer intervals. This results in fewer insert changes, higher machine uptime and a more predictable cost-per-part for production runs. Secure clamping and geometrical consistency for repeatable results Designed for system integration, the insert requires matching insert seat, geometry and milling body to ensure correct clamping and positional repeatability. The square format with a 90° included angle and a cylindrical hole with single-sided countersink (40°–60°) provides positive location and secure fixation when assembled with the specified clamp screw and support components. These mechanical features minimise vibration and promote stable chip formation, directly contributing to surface finish consistency across batches. Versatile application range with controlled chip management Assigned chipbreaker 23 supports reliable chip control across operations such as face, shoulder, slot, high-feed and contour milling depending on the chosen tool family. The 0.8 mm corner radius and 3.97 mm plate thickness balance edge strength with geometric precision, making the insert suitable for both finishing and light roughing when used under the recommended cutting conditions. As an indexable cutting solution, it enables quick indexing for renewed cutting edges and reduces tool change downtime. Select the Tungaloy SCMT09T308-23 T6215 insert for enhanced wear resistance and consistent milling performance — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903104 SKU: 6903104-Tungaloy Manufacturer SKU: TUN6903104 Model series: Fräswendeschneidplatten Designation: SCMT09T308-23 Facts Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 90° Size: 09 Special features Material: carbide Coating: CVD-coated carbide grade T6215 Chipbreaker: 23 Plate form: square Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Typical applications: milling (face, shoulder, slot, high-feed, contour) Compatibility: for Tungaloy milling systems; matching seat and geometry required FAQ Is this insert suitable for rostfreier Stahl? Yes. The SCMT09T308-23 T6215 insert is a CVD-coated carbide grade specifically aimed at machining rostfreier Stahl in stable to lightly interrupted conditions. Which milling operations are recommended for this insert? The insert supports face, shoulder, slot, high-feed and contour milling, depending on the selected tool family and milling body configuration. What does the T6215 grade provide in terms of cutting performance? T6215 is a wear-resistant, CVD-coated carbide grade that extends tool life, improves edge stability and promotes consistent chip control for demanding milling of rostfreier Stahl. What are the key geometric specifications to check before mounting? Check the 90° included angle, 0.8 mm corner radius, 7° relief angle, 3.97 mm plate thickness and the cylindrical hole with single-sided countersink for compatibility with the milling body and clamping hardware. Can this insert be used in non-Tungaloy milling bodies? The insert is designed for Tungaloy milling systems; the insert seat, geometry and milling body must be technically compatible to ensure secure clamping and proper performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com