SCMT 09T308 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide in grade T6215 together with a 0.8 mm corner radius and a secure mounting form for consistent, repeatable milling of stainless steels; order the insert directly via Metav Werkzeuge or ask our consultants for application-matched milling bodies. SCMT 09T308 T6215 SCMT09T308-23 milling insert by Tungaloy — CVD-coated carbide, 0.8 mm corner radius The SCMT09T308-23 T6215 is a square indexable insert for milling, engineered for face, shoulder, slot and contour operations and optimised for machining stainless steels under stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Square insert size 09, corner radius 0.8 mm 90° cutting edge with 7° relief angle Cylindrical hole with 40°–60° countersink 3.97 mm plate thickness for secure clamping Durable coating and material choice for longer tool life The insert is produced from carbide with a CVD-coated carbide surface in grade T6215, designed to resist adhesive and abrasive wear common when machining stainless steels. The CVD layer provides a hard, thermally stable barrier that reduces flank and crater wear at elevated cutting temperatures; this means fewer tool changes, lower downtime and a more predictable lifetime in serial production. For buyers concerned with process reliability, the material choice translates directly into measurable productivity gains. Geometry engineered for accuracy and chip control A defined 0.8 mm corner radius and a 90° cutting edge deliver a balance between edge strength and profile accuracy, while the 7° relief angle aids smooth entry and exit during plunge and contour passes. The integrated chipbreaker 23 is tailored to break and evacuate chips reliably, improving surface finish and reducing recutting of swarf. These geometric features together ensure stable cutting forces and help maintain component tolerances, particularly on thin-walled or complex stainless-steel parts. Secure clamping and system compatibility to improve throughput With a 3.97 mm plate thickness, a square 09 format and a cylindrical hole with one-sided countersink (40°–60°), the insert offers secure clamping and repeatable seating in compatible milling bodies. The insert is intended for use with Tungaloy milling systems where seat geometry and clamp design match the insert form; correct pairing reduces vibration and increases achievable cutting parameters. For production environments seeking consistent surface quality and process stability, this combination supports higher material removal rates with predictable tool life. For machining stainless steels with the proven T6215 wear resistance and secure clamping, contact Metav Werkzeuge for matching milling bodies or a technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6876441 Manufacturer SKU: TUN6876441 SKU: 6876441-Tungaloy Item designation: SCMT09T308-23 T6215 Tungaloy insert Model series: Fräswendeschneidplatten Facts Corner radius: 0.8 mm Plate thickness: 3.97 mm Cutting angle: 90° Relief angle: 7° Size: 09 Chipbreaker: 23 Special features CVD-coated carbide (grade T6215) Square insert with cylindrical hole + one-sided countersink (40°–60°) Suitable for milling: face, shoulder, slot, high-feed and contour depending on cutter body Designed for stable to lightly interrupted cuts in stainless steels Compatible with Tungaloy milling systems FAQ What applications suit this insert best? This insert is designed for milling operations such as face, shoulder, slot and contour milling; the SCMT09T308-23 T6215 performs particularly well in production runs on stainless steels under stable or lightly interrupted conditions. Which materials can the insert machine effectively? The T6215 grade and CVD coating are optimised for machining stainless steels, offering wear resistance for typical stainless-steel alloys and similar materials encountered in industry. How should the insert be mounted in the milling body? Mounting requires a compatible Tungaloy milling body with a matching seat and clamp; the insert’s cylindrical hole with one-sided countersink and 3.97 mm thickness ensure stable seating and repeatable clamping when the cutter and insert geometry are correctly paired. What benefit does the chipbreaker 23 provide? Chipbreaker 23 controls chip formation and evacuation to improve surface finish and reduce chip re-cutting; this supports higher feed rates and more consistent cutting forces during milling. Is the insert suitable for interrupted cuts or heavy-duty milling? The insert is intended for stable to lightly interrupted conditions; for heavy interrupted cuts or extreme engagement, selection of a specific cutter body and machining parameters should be verified to match the application and preserve tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 T9215 Wendeplatten - Tungaloy
Take advantage of the proven combination of CVD-coated carbide T9215 and a 0.8 mm corner radius for robust edge life and stable chip formation during medium-steel milling; order directly via Metav Werkzeuge or consult the team for application guidance. SCMT09T308-23 T9215 indexable insert for milling (square 09, 90°) — Tungaloy, CVD-coated carbide A SCMT09T308-23 T9215 indexable insert designed for milling operations, optimised for medium-steel machining and compatible with Tungaloy milling systems where insert seat, geometry and cutter body match CVD-coated grade T9215 for steel machining 0.8 mm corner radius for durable cutting edges Square 09 form with 90° cutting angle Cylindrical hole with single-sided countersink Consistent performance for medium-steel milling The CVD-coated T9215 grade combines high wear resistance with fracture toughness, making it a reliable choice for continuous to lightly interrupted cuts in steel. Its application focus is on medium-steel machining, where balancing tool life and productivity is essential. The coating reduces flank wear and preserves cutting geometry over longer production runs, which translates into fewer indexings and lower tool-change frequency. This results in improved process stability and predictable component quality when used within the matching Tungaloy milling system. Geometry that secures repeatable results The insert’s square 09 form and 90° cutting angle deliver stable corner engagement and consistent shoulder faces. With a 0.8 mm corner radius and a 7° clearance angle, the cutting edge is robust enough to absorb moderate variances in feed and engagement while still producing accurate contours and shoulders. The 3.97 mm plate thickness contributes to rigidity, reducing vibration and helping to maintain dimensional tolerances. These geometric characteristics make the insert especially suitable where repeatable surface finish and edge integrity are priorities. System compatibility and simple integration This insert is part of a modular milling system: the cutter body, insert seat and clamping screw must be technically compatible to ensure safe operation. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to fit common clamping designs and provide precise seating. Selecting an insert and body combination from the same system family reduces set-up time and minimises alignment errors, supporting quicker tool changes and predictable machining cycles on production lines. Productivity and application versatility Designed for planing, shoulder, slot and contour milling depending on the chosen cutter family, the insert supports a range of milling tasks from finishing to productive roughing in medium steels. The combination of a CVD-coated carbide substrate and the T9215 grade enables higher material removal rates under stable cutting conditions and contributes to controlled chip formation. For operations that demand sustained output and consistent surface quality, this insert provides a balance between tool life and process efficiency. Contact Metav Werkzeuge for tailored application advice or to secure Tungaloy inserts for high-productivity steel milling — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772463 Manufacturer SKU: TUN6772463 Label: SCMT09T308-23 T9215 Tungaloy-indexable insert Model series: Milling indexable inserts Facts Corner radius: 0.8 mm Plate thickness: 3.97 mm Insert size: 09 Cutting angle: 90° Clearance angle: 7° Chipbreaker designation: 23 Special features Material: carbide (Hartmetall) Coating / grade: T9215 (CVD-coated carbide) Plate form: square Hole: cylindrical hole + single-sided countersink (40°–60°) Typical applications: plan, shoulder, slot, high-feed and contour milling (depending on tool family) System note: Insert seat, geometry and cutter body must be technically compatible within Tungaloy systems FAQ What materials is this insert optimised for? The SCMT09T308-23 T9215 insert is optimised for medium-steel machining; the T9215 CVD-coated carbide provides wear resistance and impact strength for continuous to lightly interrupted cuts. Can this insert be used for high-feed milling? Use for high-feed operations depends on the chosen cutter family; the insert is suitable for a range of milling tasks including high-feed profiles when paired with the appropriate Tungaloy milling body. What does the hole and countersink specification mean for clamping? The cylindrical hole with a single-sided countersink (40°–60°) ensures precise seating and compatibility with common clamping screws, aiding secure fixation and repeatable positioning. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius provides a robust cutting edge that improves edge life and reduces the risk of chipping, while still allowing good surface finish on shoulders and contours. Are there system compatibility requirements? Yes; the insert requires a matching Tungaloy milling body and correct insert seat geometry. Using components from the same system family ensures safe clamping and optimal cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 T9215 Wendeplatten - Tungaloy
CVD-coated T9215 carbide combined with a 0.8 mm corner radius ensures robust edge strength and long tool life for medium steel milling; the insert is engineered for high productivity with continuous to slightly interrupted cuts. Order the SCMT09T308-23 T9215 insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT 09T308 T9215 Tungaloy indexable insert for milling — CVD-coated carbide, 0.8 mm corner radius A SCMT09T308-23 T9215 indexable insert for Tungaloy milling systems, designed for efficient medium steel machining and reliable performance in continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 Optimised for medium steel machining 0.8 mm corner radius for edge strength Compatible with Tungaloy milling bodies Consistent productivity through engineered material and coating The insert is made from carbide and finished with a CVD-coated top layer designated T9215, a combination that balances wear resistance and fracture toughness. This material-coating pairing is specified for the middle range of steel machining where both cutting-edge durability and resistance to chipping are essential. The result is sustained cutting performance under continuous operation and during light interruptions, translating into fewer index changes and more productive machining cycles. The technical advantage of a CVD layer lies in its uniform, firmly bonded coating that reduces flank wear and supports stable tool life under repeatable conditions. Precision geometry for reliable clamping and predictable results Geometry and seat compatibility are decisive for repeatable results: the square 09-size insert presents a nominal included angle of 90°, a clearance angle of 7°, and a corner radius of 0.8 mm, all of which contribute to secure clamping and consistent tool engagement. The insert’s hole is a cylindrical hole with a one-sided countersink (40°–60°), ensuring correct seating and torque transfer with the matching clamping screw. The integrated chipbreaker 23 is shaped to guide chips away from the cutting zone, improving surface finish and reducing the risk of re-cutting. These geometric details support dimensional accuracy and simplify setup when the insert is used with a compatible milling body. Practical advantages for production planning and tool management Designed as part of a system, the insert requires a matching milling body and correct seat geometry; this system approach reduces setup variability and promotes process reliability across batches. The modest plate thickness (3.97 mm) and square form factor facilitate straightforward index changes and inventory rotation. As an application-focused grade, this insert helps to lower overall tooling costs by extending usable life and enabling higher material removal rates where appropriate. For shops seeking reproducible results, the combination of Tungaloy system compatibility and the insert’s robust specifications supports stable cycle times and predictable maintenance intervals. For advice on application suitability, ordering SCMT inserts or to request technical recommendations, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for direct support and supply options Technical data Article number: 6772461 Manufacturer SKU: TUN6772461 Model designation: SCMT09T308-23 Series: Fräswendeschneidplatten Application: Milling Core specifications Size: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 90° Chipbreaker: 23 Design & features Material: carbide Coating / grade: CVD-coated, T9215 Shape: square Hole: cylindrical hole with one-sided countersink 40°–60° Compatible with: Tungaloy milling systems FAQ What materials is this insert best suited for? The SCMT09T308-23 T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade T9215 combines wear resistance and toughness for productive steel cutting. Is the insert compatible with other manufacturers’ milling bodies? Compatibility requires identical seat geometry and clamping method; the SCMT09T308-23 is intended for Tungaloy milling systems and seats that match the insert’s hole and dimensions. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength and reduces chipping risk, improving tool life and stability in shoulder and contour milling operations. What is the purpose of chipbreaker 23 on this insert? The chipbreaker 23 is formed to control chip flow and break long chips into manageable segments, which improves surface finish and reduces re-cutting for consistent results. How should the insert be secured in the milling body? Use the specified clamping screw and ensure correct seating with the insert’s cylindrical hole and one-sided countersink; correct torque and matching seat geometry secure repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 T9215 Wendeplatten - Tungaloy
Die Kombination aus CVD-beschichtetem Hartmetall T9215, präziser Geometrie und sicherer Klemmung sorgt für hohe Produktivität und konstante Standzeiten beim Fräsen von mittelhartem Stahl. Bestellen Sie den Einsatz direkt über Metav Werkzeuge oder kontaktieren Sie unsere technischen Berater bei Fragen zur Einbaurichtigkeit und Auswahl des passenden Fräskörpers. SCMT 09T308 T9215 indexable insert for milling — Tungaloy The SCMT09T308-23 T9215 Tungaloy indexable insert is a square milling insert engineered for reliable performance in Tungaloy milling systems, requiring matching seat, geometry and cutter body for optimal results. CVD-coated carbide grade T9215 Optimised for medium steel machining Square insert with 0.8 mm corner radius Cylindrical hole with 40°–60° single countersink Durable coating for extended tool life and consistent production The CVD-coated carbide grade T9215 combines high wear resistance with sufficient fracture toughness, making it a dependable choice for continuous to slightly interrupted cuts in medium-strength steel. The chemical vapour deposition layer improves resistance to abrasive wear and thermal degradation, which translates into longer edge life and fewer index changes during series production. For production planners this means more uptime and predictable tool replacement intervals, supporting steady component throughput. Stable geometry and clamping for reproducible surface quality A square plate with an included angle of 90°, a 0.8 mm corner radius and a relief angle of 7° provides robust cutting geometry that supports stable cutting forces and good engagement with the workpiece. The cylindrical hole with a single-sided countersink (40°–60°) secures the insert in the pocket and ensures repeatable seating under high cutting loads. These mechanical features reduce micro-movements at the cutting edge, improving surface finish and dimensional consistency across batches. Versatile application spectrum with effective chip control Designed for a range of milling operations — including face, shoulder, slot, high-feed and contour milling depending on the tool family — this indexable insert features chipbreaker 23 which aids chip control in the relevant cutting regimes. The system build-up typically comprises a cutter body, the indexable insert, clamping screw and, if required, a seating pad; all must match technically for safe operation. This modular approach enables quick insert changes and minimal downtime, supporting efficient shop-floor processes. For technical advice or to procure Tungaloy indexable inserts and compatible cutter bodies, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will assist with selection and integration. Technical data Article number: 6774011 Manufacturer SKU: TUN6774011 SKU: 6774011-Tungaloy Model series: Fräswendeschneidplatten Brand: Tungaloy Core specifications Shape: square Size designation: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 90° Designs / Special features CVD-coated carbide grade T9215 Chipbreaker: 23 Hole: cylindrical hole + single-sided countersink (40°–60°) Typical applications: face, shoulder, slot, high-feed, contour milling System components: cutter body, insert, clamping screw, pad FAQ What materials is this insert designed for? The SCMT09T308-23 T9215 Tungaloy insert is optimised for medium-strength steel machining and delivers a balance of wear resistance and toughness suited to sustained operations. Can the insert be used for interrupted cuts? Yes, the CVD-coated T9215 grade is suitable for continuous to slightly interrupted cuts; mechanical stability and the clamping design support limited interruptions without rapid edge failure. Which cutter body must be used with this insert? The insert requires a Tungaloy-compatible milling body with a matching seat and geometry; correct compatibility of the cutter body, insert and clamping screw is essential for safe and repeatable performance. How does the chipbreaker 23 affect machining? Chipbreaker 23 provides improved chip control in a range of milling strategies, helping to evacuate chips efficiently and maintain consistent cutting conditions during production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 T9225 Wendeplatten - Tungaloy
Benefit from a cost-effective combination of robust T9225 CVD-coated cemented carbide, a 0.8 mm corner radius for interrupted cuts, and a secure hole-and-countersink clamping design for stable, high-productivity milling; order the SCMT09T308-23 insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT 09T308 T9225 indexable insert for milling — Tungaloy The SCMT09T308-23 T9225 is a square, CVD-coated cemented carbide indexable insert designed for mid-to-heavy steel milling in compatible Tungaloy milling systems. CVD-coated cemented carbide T9225 Square 09 insert with 90° cutting angle 0.8 mm corner radius for interrupted cuts Cylindrical hole with single-side countersink Increased tool life and consistent performance for mid-to-heavy steel milling The T9225 grade is a CVD-coated cemented carbide developed as a robust universal solution for medium to heavy-duty steel machining where variable engagement and slightly interrupted cuts demand additional toughness. The coating enhances wear resistance and edge stability under elevated temperatures, while the substrate maintains fracture resistance. Together, these properties reduce the frequency of tool changes and contribute to a more predictable production rhythm, improving overall machining economy and machine uptime. Secure clamping and geometry that stabilise the cut Engineered as a square 09 insert with a 90° cutting angle and a 3.97 mm plate thickness, the insert provides a stable contact area for milling bodies that match the same seat and geometry. The insert features a cylindrical hole with a single-side countersink (40°–60°) to ensure repeatable clamping and positive locate, while the 7° relief angle supports a reliable cutting edge under load. These design choices translate into improved vibration resistance and steadier surface quality on the workpiece when paired with the appropriate Tungaloy cutter body. Versatile application range and clear system requirements Typical applications for this insert include face milling, shoulder milling, slotting, high-feed and contour milling, depending on the assigned tool family. The 0.8 mm corner radius offers a balance between edge strength and geometry for good surface finish and durability in interrupted conditions. Note that the insert must be used in Tungaloy milling systems with matching insert seat and geometry to guarantee correct seating, clamping and performance. Selection of the correct chipbreaker and mating cutter will determine final process stability and component quality. For ordering guidance, availability or to discuss the most suitable Tungaloy insert options for a specific milling task, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for professional support and rapid delivery information. Technical data Article number: 6781125 SKU: 6781125-Tungaloy Manufacturer SKU: TUN6781125 Model series: Fräswendeschneidplatten Designation: SCMT09T308-23 Core specifications Corner radius: 0.8 mm Thickness: 3.97 mm Relief angle: 7° Cutting angle: 90° Size designation: 09 Chipbreaker: 23 Features & compatibility Coating: T9225 (CVD-coated grade) Material: Cemented carbide Hole: Cylindrical hole with single-side countersink (40°–60°) Shape: Square insert Application: Milling (face, shoulder, slot, high-feed, contour) FAQ What materials is this insert suited for? The SCMT09T308-23 T9225 Tungaloy indexable insert (SKU 6781125-Tungaloy) is specified as a robust universal grade for mid-to-heavy steel machining, particularly where varying engagement or slight interruptions require additional toughness. Will the insert fit non-Tungaloy cutter bodies? The insert requires a matching insert seat, geometry and milling body; optimal performance and secure clamping are achieved when used in Tungaloy milling systems that accept the SCMT 09T308 form. How does the chipbreaker 23 influence machining? The chipbreaker 23 is designed to control chip formation for the intended milling applications; combined with the T9225 grade it promotes stable cutting and manageable chips in medium to heavy steel work. Is the 0.8 mm corner radius suitable for finishing passes? The 0.8 mm corner radius provides increased edge strength for interrupted cuts; for fine finishing a smaller radius may be preferable, whereas this radius balances durability and surface quality in many roughing and medium finishing operations. What must be considered when mounting the insert? Ensure the cutter body and seat geometry are technically compatible with the insert form and that the cylindrical hole with single-side countersink is correctly engaged by the clamping screw and seating feature to guarantee repeatable locating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide T9225 grade combined with a 0.8 mm corner radius and a secure central hole design for reliable, repeatable milling results; order directly via Metav Werkzeuge or request advice from our technical consultants. SCMT 09T308 T9225 indexable insert for milling — Tungaloy SCMT09T308-23 T9225 is an indexable milling insert designed for Tungaloy milling systems and engineered for medium to heavy steel milling operations. CVD-coated carbide grade T9225 Suitable for medium to heavy steel milling Square 09 format with 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Precise interface and system compatibility for predictable production The indexable insert is designed to fit Tungaloy milling bodies where seat geometry and clamping match precisely, ensuring stable cutting engagement and repeatable tool life. The designation identifies the insert as a square 09 format with an included angle of 90°, making it suitable for a range of general-purpose milling tasks such as face, shoulder and slotting operations. The central cylindrical hole with an additional one-sided 40°–60° countersink supports secure clamping and simple orientation during assembly, reducing downtime and alignment checks on the machine. Robust grade and coating for variable cutting conditions Manufactured from CVD-coated carbide and specified as T9225, this insert offers a robust universal grade tailored to medium to heavy steel machining where interrupted cuts or variable engagement occur. The CVD coating improves wear resistance and heat management at elevated cutting temperatures, while the substrate combines toughness and hardness to resist chipping under fluctuating loads. As a result, the component delivers consistent performance across a wide range of feeds and speeds, supporting productive metal removal without frequent insert changes. Geometry optimised for stability and surface quality With a 0.8 mm corner radius and a 7° relief angle, the geometry balances edge strength and finish quality: the radius increases edge resilience at entry points, while the relief angle reduces rubbing and heat build-up. The 3.97 mm thickness contributes to mechanical stiffness and reduces vibration risk in moderate-depth milling tasks. Together these features help achieve an improved surface finish and longer stable cutting periods, which is particularly advantageous when switching between roughing and finishing passes in a single setup. Application focus and process benefits in production environments Specified for a broad range of milling tasks, the insert supports planing, shoulder work and contouring where tool families match the insert seating. The T9225 grade simplifies tooling decisions by covering many steels and mixed-production scenarios, reducing inventory complexity. Process reliability is enhanced through predictable wear behaviour and a secure clamping interface, which in turn lowers rework rates and contributes to more efficient cycle times on high-mix, low-volume shop floors and in serial production alike. Contact Metav Werkzeuge for tailored advice on Tungaloy milling inserts, availability of SKU TUN6781070 and technical documentation; requests can be sent to info@metav-werkzeuge.com or discussed by phone at +49 2822 7131930 Technical data Article number: 6781070 SKU: 6781070-Tungaloy Manufacturer SKU: TUN6781070 Type designation: SCMT09T308-23 Core dimensions Format: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 90° Features and applications Material: carbide Coating: CVD-coated carbide Grade: T9225 (robust universal grade for medium to heavy steel) Shape: square Hole: cylindrical hole with one-sided countersink (40°–60°) Application: milling (face, shoulder, slotting, high-feed and contouring depending on tool family) FAQ Which materials can this insert machine effectively? The SCMT09T308-23 T9225 indexable insert is formulated for medium to heavy steel applications; the CVD-coated carbide substrate combined with the T9225 grade offers a balance of toughness and wear resistance for variable steel cutting conditions. Is the insert compatible with standard Tungaloy milling bodies? Compatibility requires matching the clamping seat and geometry; the insert is intended for use in Tungaloy milling systems where the insert seat, geometry and cutter body are technically compatible. How does the central hole and countersink affect clamping? The cylindrical hole plus the 40°–60° countersink ensures secure mechanical engagement and correct orientation, which reduces assembly errors and enhances repeatability of cutting positions. What advantages does the 0.8 mm corner radius provide? A 0.8 mm radius increases edge strength at the corner, improving resistance to chipping during interrupted cuts and helping to maintain surface integrity during shoulder and roughing passes. Can this insert be used for high-feed milling? Application in high-feed milling depends on the associated cutter body and cutting parameters; the insert’s T9225 grade and geometry permit use in a variety of feed conditions when mounted in an appropriate high-feed-capable toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a robust CVD-coated carbide grade, reliable chip control and a 0.8 mm corner radius for stable, repeatable milling performance; order the insert via Metav Werkzeuge or consult the technical team for system matching. SCMT09T308-23 T9225 Tungaloy indexable insert for milling — CVD-coated carbide, 0.8 mm radius The SCMT09T308-23 is a square indexable insert for Tungaloy milling systems, optimised for medium to heavy steel machining and requiring a matched insert seat and body geometry. CVD-coated carbide for enhanced edge life Universal T9225 grade for medium–heavy steel Square insert with 0.8 mm corner radius Cylindrical hole with countersink for secure seating Reliable edge life for medium to heavy steel milling The combination of a CVD coating and a carbide substrate provides a balance of wear resistance and toughness that is well suited to demanding steel applications. The T9225 grade is formulated as a universal option for variable engagement and slightly interrupted cuts, which helps maintain edge integrity under changing conditions. As a result, the insert delivers longer service intervals and more predictable tool-change cycles compared with uncoated alternatives, improving process reliability in production runs. System fit and secure clamping reduce vibration Precise seating and clamping are essential for consistent results. The insert’s square form, cylindrical hole with a single-sided countersink (40°–60°) and a nominal 7° clearance angle ensure correct alignment and secure clamping in compatible milling bodies. Correct matching of insert seat, geometry and cutter body reduces micro-movement and vibration, which in turn stabilises the cut and contributes to repeatable surface finish and dimensional consistency across components. Versatile machining operations with reliable chip control Designed for a wide range of milling tasks — from face and shoulder milling to slotting, high-feed and contouring depending on the tool family — this indexable insert features chipbreaker 23 that supports stable chip formation and evacuation. Stable chip control shortens cycle times and reduces the risk of rework caused by poor chip behaviour, making the insert a practical option for job shops and production environments that encounter mixed cut conditions. Productivity through fewer tool variants and predictable performance Using a robust universal grade such as T9225 reduces the need to stock numerous specialised grades, simplifying inventory and accelerating tool selection. The insert’s geometry and coating contribute to longer flank life and consistent cutting behaviour, which together lower downtime and support higher overall machining efficiency. In production terms, this equates to fewer tool changes and a steadier output quality over longer runs. For integration advice or to confirm compatibility with existing Tungaloy milling bodies, contact Metav Werkzeuge for technical guidance and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781141 SKU: 6781141-Tungaloy Manufacturer SKU: TUN6781141 Label: SCMT09T308-23 T9225 Tungaloy-Wendeplatte Model series: milling indexable inserts Facts Corner radius: 0.8 mm Clearance angle: 7° Thickness: 3.97 mm Size designation: 09 Main angle: 90° Special features CVD-coated carbide Universal T9225 grade for medium–heavy steel Square plate form Cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: 23 Application: milling Requires matched insert seat, geometry and cutter body FAQ What materials is this insert suitable for? The SCMT09T308-23 T9225 insert is intended primarily for medium to heavy steel machining; the T9225 grade offers the toughness needed for variable engagement and slightly interrupted cuts. Can this insert be used in non‑Tungaloy cutter bodies? The insert can be fitted into any cutter body that matches its seat and geometry, but the SCMT09T308-23 requires a technically compatible seat and clamping system to ensure correct performance and safety. Which milling operations are recommended for this insert? The indexable insert is suitable for face, shoulder, slot, high‑feed and contour milling depending on the assigned tool family; its chipbreaker 23 supports controlled chip flow during these tasks. How does the CVD coating benefit production runs? The CVD coating increases wear resistance and edge stability, extending useful tool life and enabling more consistent cycle times across production batches with varying engagement conditions. Why is the cylindrical hole and countersink important? The cylindrical hole with a single-sided countersink (40°–60°) ensures secure seating and positive clamping, which reduces vibration and improves repeatability of dimensional and surface finish results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T9225 carbide for robust performance and a 0.8 mm corner radius in a square form for secure edge strength, ensuring reliable milling in medium to heavy steel. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. SCMT 09T308 T9225 indexable milling insert for milling – Tungaloy A SCMT09T308-23 T9225 indexable milling insert designed for productive face, shoulder, slot and contour milling in varying engagement conditions. CVD-coated carbide grade T9225 Robust universal grade for medium–heavy steel Square insert with 0.8 mm corner radius Centre hole with cylindrical bore and countersink Predictable performance under variable cutting conditions The CVD-coated T9225 grade combines a wear-resistant coating with a tough carbide substrate to deliver consistent tool life in mixed engagement and slightly interrupted cuts. This composition supports stable chip formation and reduces the frequency of edge changes in batch production. For manufacturers focused on throughput, the combination of coating and substrate translates into quantifiable runtime and fewer unplanned tool changes, improving overall process reliability and lowering per-part tooling costs. Geometry engineered for strength and surface quality A square insert profile with a 0.8 mm corner radius and a relief angle of 7° provides a robust cutting edge that withstands heavy radial loads while maintaining surface finish. The 3.97 mm plate thickness contributes to rigidity in the tool body, reducing vibration and promoting repeatable dimensional accuracy. The integrated chipbreaker 23 is optimised to support controlled chip flow at elevated feeds, thereby aiding cooling and reducing built-up edge on the cutting margin, which benefits both component quality and tool longevity. System compatibility and secure mounting for consistent results These inserts are produced for Tungaloy milling systems and require the correct insert seat, geometry and cutter body to ensure secure clamping and correct rake relationships. The centre feature—a cylindrical bore with a one-sided countersink (40°–60°)—ensures positive location and repeatable clamping, which is critical for high-speed rotation and heavy engagement scenarios. When fitted in a matching Tungaloy milling body, the insert supports predictable positional repeatability and safe torque transmission. Application focus: efficient steel machining across common operations Intended as a universal grade for medium to heavy steel machining, the insert suits face milling, shoulder milling, slotting, high-feed operations and contouring where variable engagement or slight interruptions demand toughness rather than the hardest edge. By choosing this geometry and grade, shops benefit from a balance between wear resistance and fracture tolerance, making the solution particularly appropriate for mixed production batches and robust daily shop-floor use. Contact Metav Werkzeuge for tailored recommendations on Tungaloy T9225 inserts and assistance matching the correct milling body; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781203 Manufacturer SKU: TUN6781203 Brand: Tungaloy Model series: Fräswendeschneidplatten Designation: SCMT09T308-23 Label: SCMT09T308-23 T9225 Tungaloy-Wendeplatte Core specifications Size: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Angle: 90° Chipbreaker: 23 Hole: with hole (cylindrical bore + one-sided countersink 40°–60°) Materials & features Material: Carbide Coating/Grade: T9225, CVD-coated Shape: Square Typical application: Milling (face, shoulder, slot, high-feed, contour milling) System compatibility: For Tungaloy milling systems; insert seat and cutter body must match Usage: Medium to heavy steel machining, intermittent cuts, variable engagement FAQ What materials is this insert best suited for? The insert is specified for medium to heavy steel machining and performs well under changing engagement conditions where toughness is required. How does the T9225 grade differ from tougher or harder grades? T9225 is a CVD-coated universal grade that favours a balance of wear resistance and toughness, offering improved chip control and fewer edge failures in interrupted cuts compared with harder, more brittle grades. What ensures correct mounting and repeatability within a milling cutter? The cylindrical hole with a one-sided countersink (40°–60°) ensures positive location and consistent clamping force when used with the matching Tungaloy cutter body, providing repeatable positioning and torque transmission. Is the 0.8 mm corner radius suitable for finishing passes? A 0.8 mm corner radius offers a compromise between strength and surface quality; it is well suited to finishing of robust components but may require a smaller radius if very fine surface finish is the primary objective. Which operations are typically recommended for this insert? The geometry and grade are intended for face, shoulder, slot, high-feed and contour milling in production environments where engagement varies or slight interruptions occur. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 09T312 T5115 Wendeplatten - Tungaloy
Benefit from a robust balance of CVD-coated carbide T5115 and an optimised CM chipbreaker for reliable cast-iron turning; the insert’s square 90° geometry and 1.2 mm corner radius deliver predictable surface quality and durable cutting edges. Order the SCMT09T312-CM T5115 Tungaloy insert via Metav Werkzeuge or ask the consultants for application advice. SCMT 09T312 T5115 — Tungaloy indexable insert for turning, CVD-coated carbide, CM chipbreaker The SCMT09T312-CM T5115 Tungaloy insert is an ISO-format, square turning insert designed for efficient external and internal machining of cast iron, combining a universal grade with a chipbreaker tuned for stable chip formation. CVD-coated carbide T5115 Optimised CM chipbreaker Square 90° insert geometry Compatible with ISO holders High-performance cutting for cast-iron turning The combination of CVD-coated carbide and the T5115 grade provides a balanced mix of wear resistance and cutting-edge stability that is especially suitable for cast iron machining. The CM chipbreaker is engineered to control chip shape and evacuation, reducing interruptions and minimising the risk of built-up edge. This results in consistent part quality and less unscheduled downtime. The insert’s substrate and coating strategy aim to extend usable life while maintaining edge integrity under typical turning conditions. Seamless integration with ISO toolholders for straightforward setup Designed as an ISO-format indexable insert, compatibility depends on the insert’s form, clearance angle (7°), tolerance class, attachment method, size and thickness. The square 90° geometry and the 1.2 mm corner radius offer a stable cutting edge for robust engagement, while the 3.97 mm thickness contributes to rigidity in heavy or interrupted cuts. The plate is supplied with a cylindrical hole and a one-sided countersink (40°–60°) for secure fastening. A typical system comprises an ISO turning insert, a matching external holder or boring bar, a shim/clamp set and replacement screws for quick assembly and precise clamping. Predictable productivity and economical machining Selecting the T5115 universal grade with a CM chipbreaker supports a wide material range within the cast-iron family and promotes stable process behaviour, which aids in meeting production targets with repeatable results. The 1.2 mm radius helps deliver the desired surface finish while preserving cutting-edge strength, reducing the need for frequent index changes. Overall, the geometry and coating strategy contribute to lower tooling consumption per part and a more dependable machining routine, making the insert a practical choice for jobbing shops and production environments that require both versatility and consistency. Contact Metav Werkzeuge for tailored application recommendations and to order the SCMT09T312-CM T5115 Tungaloy insert; technical advisors are available by email or phone to ensure the insert matches the intended holder and machining conditions. Technical Data Article number: 6864681 SKU: 6864681-Tungaloy Manufacturer SKU: TUN6864681 Model series: ISO-Drehwendeschneidplatten Designation: SCMT09T312-CM T5115 Tungaloy-Wendeplatte Facts Corner radius: 1.2 mm Thickness: 3.97 mm Size: 09 Clearance angle: 7° Insert included angle: 90° Countersink angle: 40°–60° Special features Substrate: carbide Coating: CVD Grade: T5115 Chipbreaker: CM Plate form: square Hole: cylindrical hole with one-sided countersink Application: turning Typical system: ISO insert, matching holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suited for? The SCMT09T312-CM T5115 insert is intended primarily for cast iron applications; the T5115 grade balances wear resistance and edge stability for reliable machining of grey and nodular iron. How does the CM chipbreaker affect performance? The CM chipbreaker on this indexable insert promotes controlled chip formation and evacuation, improving surface finish and reducing the chance of chip-related interruptions during turning. Which holders are compatible with this ISO-format insert? Compatibility requires a holder that matches the insert’s form, clearance angle (7°), size and thickness; the insert works with standard ISO external holders or suitable boring bars when the clamping and tolerance class correspond. Can the insert handle interrupted cuts? The square 90° geometry combined with a 1.2 mm corner radius provides edge strength that tolerates many interrupted cut scenarios; selection of cutting data and holder rigidity remains important for optimal performance. What fastening method does the insert use? The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) for secure fastening in compatible clamping systems and holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of high process stability, a sharp yet durable cutting edge and ISO compatibility to increase throughput in stainless steel turning operations. Order SCMT120404 AH6225 inserts through Metav Werkzeuge for reliable delivery, or consult the team for selection support and optimisation. SCMT120404 AH6225 turning insert — Tungaloy, 7° relief, 0.4 mm radius The SCMT120404 AH6225 is an ISO-format turning insert designed for external and internal turning of stainless steel, combining a sharp cutting edge with a stable grade for variable machining conditions. ISO-format square insert SCMT120404 PVD-coated carbide for stainless steel 7° relief and 0.4 mm corner radius Cylindrical hole with 40°–60° countersink Consistent machining performance with a universal grade The AH6225 grade is a PVD-coated carbide developed for reliable performance on stainless steel, delivering a sharp yet stable cutting edge under medium cutting depths and intermittent conditions. This balance reduces the need for immediate feed or speed adjustments when batch variables change, which supports predictable cycle times. The coating improves wear resistance, while the substrate maintains edge form, so the insert sustains consistent surface finish without frequent index changes. Geometry that lowers cycle times and improves surface quality Precision geometry is central to reducing set-up and machining time: the square 12 mm format with an included angle of 90°, 7° relief and a 0.4 mm corner radius concentrates cutting forces and supports stable engagement. The 4.76 mm thickness increases stiffness in clamping, helping to damp vibrations during interrupted cuts. Together, these geometric features enhance chip formation and contribute to a smoother finish on turned components, especially when switching between roughing and light finishing passes. Coating and chip control for repeatable results A PVD-coated carbide grade combined with a single-sided chipbreaker provides controlled chip flow and long tool life for variable stainless steel applications. The chipbreaker design aids evacuation in external and internal turning, lowering the risk of built-up edge and keeping cycle reliability high. This means fewer unscheduled tool changes and more consistent part quality, which benefits production planning and reduces overall machining cost per part. ISO compatibility and secure clamping for quick integration The insert follows ISO standards, so compatibility with external holders or boring bars is determined by form, relief angle, tolerance class, fixing method, size and thickness. The cylindrical hole with a single-side countersink (40°–60°) ensures secure clamping in many common clamping systems. As part of a system approach — insert, clamping set and screw — the component integrates into existing toolholders with minimal adaptation, supporting fast tool changes and reduced downtime. Contact Metav Werkzeuge for procurement and technical advice on Tungaloy SCMT120404 AH6225 inserts for stainless steel turning — email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance and fast dispatch Technical data Article number: 6903305 SKU: 6903305-Tungaloy Manufacturer SKU: TUN6903305 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: AH6225 (PVD) Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 90° Manufacturer article number: 6903305 Special features Square insert, ISO-format Single-sided chipbreaker Cylindrical hole + one-sided countersink (40°–60°) PVD-coated carbide grade Suited to stainless steel machining Compatible with external holders and boring bars FAQ Which materials is this insert suitable for? The SCMT120404 AH6225 is optimised for stainless steel; the AH6225 PVD-coated carbide provides a balance of edge stability and wear resistance for medium cutting conditions. What kind of machining is the chipbreaker designed for? The single-sided chipbreaker supports both external and internal turning operations, promoting reliable chip control during interrupted cuts and variable feeds with the SCMT120404 AH6225. Which geometric features improve surface finish and tool life? Key design elements such as the 7° relief, 0.4 mm corner radius and 4.76 mm thickness reduce vibration and favour consistent chip formation, which helps to sustain surface quality and extend the tool’s effective life. How is the insert secured in the toolholder? The insert uses a cylindrical hole with a single-side countersink (40°–60°) for positive clamping; compatibility is governed by form, relief angle, tolerance class, fixing method, size and thickness typical for ISO-format inserts. Is the grade coated and what are the benefits? The AH6225 grade is a PVD-coated carbide offering improved wear resistance and stable cutting-edge behaviour, designed to maintain performance in the demanding conditions of stainless steel machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120404 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH6235 toughness, a 0.4 mm corner radius for precise profiles and ISO compatibility to ensure consistent turning performance and reduced downtime; order the insert directly via Metav Werkzeuge or consult our technical team for application guidance. SCMT 120404 AH6235 turning insert by Tungaloy — PVD-coated carbide, 90° square geometry SCMT 120404 AH6235 Tungaloy turning insert designed for robust external and internal turning where interrupted cuts and higher breakout risk demand a tougher grade and stable chip control PVD-coated carbide grade AH6235 Optimised for stainless steels and interrupted cuts 0.4 mm corner radius for accurate profiles ISO square insert, 90° cutting edge Stable chip control and material coverage for productive turning The AH6235 grade is a PVD-coated carbide composition formulated for tougher behaviour when machining stainless steels and other demanding alloys. This translates into improved resistance to chipping during interrupted cuts and operations with variable feed, which reduces unplanned insert changes and scrap. The single-sided chipbreaker geometry supports predictable chip formation, aiding coolant flow and chip evacuation; as a result, process stability and cycle-time consistency are enhanced, making the solution attractive for production environments seeking reliable throughput. Geometry engineered for dimensional accuracy and secure clamping With a 0.4 mm corner radius, 90° square shape and 7° relief angle, the insert delivers repeatable profile control and edge strength for shoulder and profile turning. The central bore with a cylindrical hole plus a single-side countersink (40°–60°) ensures positive seating and torque transmission in ISO-standard holders, limiting micro-movement under load. The 4.76 mm thickness provides rigidity, reducing deflection on extended overhangs; together these geometrical choices mean fewer rework cycles and better first-pass accuracy on turned components. ISO compatibility and operational benefits for workshop efficiency As an ISO turning insert, the SCMT form offers broad holder compatibility provided size, thickness and clamping style match; this simplifies stocking and toolholder selection across mixed fleets. The tougher grade and predictable chip control lower insert consumption in unstable cuts, improving cost per part. In practice, the insert fits into a system: an ISO insert, a matching external holder or boring bar, and the appropriate clamp and screw. This modular approach supports quick index changes and efficient tool management in batch and job-shop scenarios. For reliable machining with a purpose-designed insert, contact Metav Werkzeuge to request application advice or to secure genuine Tungaloy turning inserts—email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations Technical data Article number: 6903474 Manufacturer SKU: TUN6903474 SKU: 6903474-Tungaloy Model series: ISO turning inserts Core data Shape: square (SCMT) Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Hole: cylindrical hole + single-side countersink (40°–60°) Relief angle: 7° Insert angle: 90° Materials & features Material: carbide Coating/grade: AH6235 (PVD-coated) Chipbreaker: single-sided Application: turning, external and internal turning, interrupted cuts Suitable for: stainless steels FAQ What materials is this insert best suited for? This insert is optimised for stainless steels; the AH6235 PVD-coated grade gives improved toughness for interrupted cuts and materials prone to work-hardening. How does the insert achieve better edge stability in interrupted cuts? The AH6235 grade combined with a 0.4 mm corner radius and a robust single-sided chipbreaker reduces chipping risk and maintains a stable cutting edge during interrupted turning with the SCMT 120404 geometry. Will this insert fit existing ISO holders? Compatibility depends on form, relief angle, tolerance and thickness; the SCMT form and ISO designation mean it is compatible with ISO-standard holders that accept 12 mm square inserts and a 4.76 mm thickness. Can the insert be used for internal turning? Yes, the geometry and chip control of this SCMT insert make it suitable for both external and internal turning operations where the holder and bore access permit. What is the product identification for ordering? Order using the manufacturer article number 6903474 or the manufacturer SKU TUN6903474 to ensure delivery of the genuine SCMT120404 AH6235 Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120404 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide, a fracture‑resistant AH725 grade and precise ISO geometry for reliable turning performance; order the SCMT120404 AH725 insert directly via Metav Werkzeuge or consult the team for application support. SCMT 120404 AH725 Turning Insert (ISO) – Tungaloy SCMT120404 AH725 is an ISO‑standard square indexable insert designed for precision external and internal turning in mixed steel materials. PVD-coated carbide for consistent edge life Universal fracture-resistant AH725 grade Square insert, 12 mm size and 90° geometry Central hole with 40°–60° countersink Consistent performance across steel and stainless alloys The AH725 grade is a PVD‑coated carbide designed for universal use, offering a balance between toughness and wear resistance that suits both steel and stainless steel. The combination of a fracture‑resistant substrate and thin PVD layer helps to maintain cutting edge integrity in interrupted cuts and variable feed conditions. With a 0.4 mm radius and 90° included angle, the geometry supports robust metal removal while preserving workpiece contour, making the insert appropriate for a wide range of finishing and medium‑roughing operations. Improved process stability and reduced downtime Built to enhance process stability, this insert promotes predictable tool life and consistent surface finish, reducing unscheduled tool changes and machine idle time. The chip control is aided by the single‑sided chipbreaker form, which helps avoid build‑up and unstable chips that can damage parts or holders. Better edge retention from the coating translates into fewer indexings and lower tooling costs per component, supporting efficient production runs and dependable cycle times. Straightforward integration with ISO holders and clamping systems As an ISO‑standard insert, the SCMT120404 integrates easily with compatible external holders, boring bars and clamping kits when the form, clearance, tolerance class, fastening type, size and thickness match. The insert’s mounting uses a central cylindrical hole with a one‑sided countersink (40°–60°), allowing secure fastening with standard screws and shims. When assembling the system, ensure the insert seat and clamp provide full support to preserve cutting geometry and maintain repeatable accuracy. Practical guidance for selection and use Select the single‑sided chipbreaker and AH725 grade according to the workpiece material, machine rigidity and cutting strategy; the grade performs particularly well on smaller tools and where high process security is required. The PVD coating improves surface finish and wear resistance but benefits from controlled cutting temperatures and appropriate feeds. For interrupted cuts or unstable setups, prioritise the fracture‑resistant characteristics of the grade and check clamping torque and seat cleanliness before operation to avoid premature failure. For tailored application advice or to secure genuine Tungaloy SCMT120404 AH725 inserts, contact Metav Werkzeuge for technical consultation and fast processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6856785 Manufacturer SKU: TUN6856785 SKU: 6856785-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Facts Insert designation: SCMT120404 ISO code: 120404 Insert size: 12 mm Thickness: 4.76 mm Nose radius: 0.4 mm Clearance angle: 7° Included angle: 90° Special features Grade: AH725 (PVD‑coated) Chipbreaker: single‑sided Mounting: central cylindrical hole with one‑sided countersink (40°–60°) Shape: square Typical application: external and internal turning FAQ What materials is this insert suitable for? The SCMT120404 AH725 insert is specified for versatile machining of steel and stainless steel, with the AH725 grade engineered for fracture resistance across varying workpiece alloys. How does the PVD coating benefit machining performance? PVD coating on the AH725 grade enhances wear resistance and helps maintain edge integrity, resulting in longer intervals between indexings and improved surface finish on turned components. What mounting features should be checked during installation? Verify holder seat condition, clamp alignment and the central cylindrical hole with its one‑sided countersink (40°–60°) to ensure secure fastening and repeatable positioning of the insert. Is this insert suitable for both finishing and medium‑roughing operations? Yes, the combination of a 0.4 mm radius and robust AH725 grade makes the insert adaptable for a range of finishing to medium‑roughing tasks, particularly when combined with an appropriate chipbreaker and stable setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SCMT 120404 NS9530 Wendeplatten - Tungaloy
Combining a sharp NS9530 edge, low cutting forces and an ISO‑standard square form delivers improved surface finishes and predictable tool life; order the SCMT120404 insert directly via Metav Werkzeuge or consult our technical advisors for process optimisation. SCMT120404 NS9530 ISO square turning insert, uncoated cermet – Tungaloy The SCMT120404 NS9530 is an ISO‑standard square turning insert designed for finishing steel, offering a sharp cutting edge and low cutting forces for continuous cuts. Finishing grade for steel Uncoated cermet substrate 0.4 mm corner radius ISO square insert with hole Achieve superior surface finish with a finishing grade The NS9530 is an uncoated cermet grade formulated for finishing operations on steel, providing a sharp cutting edge and low cutting forces. These properties reduce the load on the machine spindle and on workholding, which is particularly beneficial for light to medium‑duty lathes and for components where surface finish is critical. Where continuous cuts and small depths of cut are used, the insert supports a stable metal‑cutting process and can reduce the need for secondary finishing operations. Reliable mounting and ISO compatibility for predictable results As an ISO‑standard scmt insert, compatibility with the toolholder is determined by form, relief angle, tolerance class, fastening, size and thickness. The insert has a 7° relief and a square form with a nominal size of 12 mm and thickness of 4.76 mm, together with a cylindrical hole and a single‑side countersink (40°–60°) for secure clamping. These defined dimensions enable repeatable seating and consistent cutting geometry when the correct holder, shim and clamp are used. Efficient cutting performance and application guidance Designed as a finishing grade, the insert excels when used with small material removal rates and stable setups. The 0.4 mm corner radius helps to balance edge strength and surface quality, making it suitable for external and internal turning where dimensional accuracy and a fine finish are priorities. Select a one‑sided chipbreaker and matching cutting data according to workpiece rigidity and machine power for optimised chip control and to prolong insert life. System considerations and recommended use cases The SCMT120404 is intended to be used in a system comprising the ISO insert, a matching external holder or boring bar, and the required shim/clamp set with replacement screws. For best results on steel, pair the insert with holders that ensure correct lead and clearance angles and choose cutting parameters that favour continuous cutting—this maximises the benefit of the NS9530 grade’s low cutting forces and contributes to stable, repeatable machining. Contact Metav Werkzeuge for application advice and genuine Tungaloy SCMT120404 NS9530 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability Technical Data Article number: 6998491 SKU: 6998491-Tungaloy Manufacturer SKU: TUN6998491 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Specifications Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 90° Features & Materials Grade: NS9530 Cutting material type: uncoated cermet Base material: Hartmetall Plate form: square Hole: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: one‑sided Typical application: turning (external and internal) System components: insert, matching holder or boring bar, shim/clamp and replacement screws FAQ What materials is this insert best suited for? The SCMT120404 with NS9530 is optimised for finishing on steel; the uncoated cermet grade provides a sharp edge and low cutting forces that favour fine surface quality. Can the insert be used for both external and internal turning? Yes, the insert is suitable for external and internal turning when paired with the appropriate external holder or boring bar and correct clamping hardware. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius balances edge strength with the ability to produce a fine finish; it is recommended for light cuts and where surface quality is a priority. What should be checked for toolholder compatibility? Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; ensure the holder matches the insert’s 7° relief, 12 mm nominal size and 4.76 mm thickness. Is the NS9530 grade coated? No, NS9530 is an uncoated cermet grade designed for finishing operations on steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SCMT 120404 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp uncoated cermet grade for superior surface quality, a 0.4 mm corner radius for precise contours, and the standardised ISO SCMT form for straightforward toolholder compatibility; order via Metav Werkzeuge or consult our technical advisors for application-specific selection. SCMT120404 NS9530 uncoated cermet turning insert — finishing grade by Tungaloy SCMT120404 NS9530 is an ISO-format square turning insert designed for fine finishing in steel turning operations Uncoated cermet for superior surface finish 0.4 mm corner radius for precise contours 7° clearance angle reduces cutting forces ISO SCMT shape, 12 mm size, 4.76 mm thickness Consistent high-quality finishing for turning operations The combination of uncoated cermet and a sharp cutting geometry delivers a clear benefit: consistently improved surface finish on steel components under continuous cutting conditions. Cermet materials excel in finishing because they maintain a keen edge at low to moderate cutting speeds, which reduces cutting smearing and produces finer surfaces than many coated grades. This finishing grade is particularly suited to turning tasks where small depths of cut and steady feed rates are common, delivering reliable part quality and minimised rework. Lower cutting forces and stable chip control for predictable results A 0.4 mm corner radius paired with a 7° clearance angle results in reduced contact area and lower cutting forces, which helps to preserve the cutting edge and stabilise machining. The single-sided chipbreaker and the sharp edge design favour continuous chips and smooth evacuation when machining steel in finishing passes. Less vibration and predictable chip flow translate into better repeatability and reduced risk of cold welding on the cutting edge, supporting efficient production runs with consistent dimensional results. Simple integration into ISO tool systems and practical handling Built to ISO SCMT dimensions with a 12 mm size and 4.76 mm thickness, the insert is compatible with common square insert toolholders; compatibility depends on form, clearance, tolerance, fastening and plate thickness. The insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping and fast replacement. When used with an appropriate clamping set and holder, the system offers rapid exchange, predictable seating and minimal setup variation — benefits that help reduce idle time at the machine and keep production flowing. Contact Metav Werkzeuge for application advice on Tungaloy finishing inserts or to request a material-specific recommendation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998500 Manufacturer SKU: TUN6998500 Model series: ISO-Drehwendeschneidplatten Facts Geometry: SCMT120404 Corner radius: 0.4 mm Clearance angle: 7° Plate size: 12 mm Plate thickness: 4.76 mm Main angle: 90° Special features Material: tungsten carbide Grade/coating: NS9530 uncoated cermet Chipformer: one-sided Hole style: cylindrical hole + single-sided countersink (40°–60°) Plate form: square Intended application: turning Typical use: finishing on steel, continuous cut FAQ Is this insert suitable for finishing steel components? Yes. The SCMT120404 NS9530 is a finishing-grade uncoated cermet designed for turning steel, offering a sharp edge and good surface quality for continuous cutting conditions. What are the main dimensional specifications to check for toolholder compatibility? Check the ISO SCMT designation, 12 mm size, 4.76 mm thickness and the cylindrical hole with countersink; compatibility is determined by form, clearance, tolerance class, fastening and thickness. Can this insert be used for interrupted cuts? The NS9530 finishing grade is optimised for continuous cuts and small depths of cut; for heavy interruptions a more robust grade is recommended than this finishing cermet. How does the 0.4 mm corner radius affect the machined part? A 0.4 mm corner radius produces precise contours with improved tool life in finishing operations and helps reduce stress concentrations at edges compared with a perfectly sharp corner. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120404 T505 Wendeplatten - Tungaloy
Benefit from economical cast‑iron machining with a CVD‑coated carbide grade that balances performance and economy; the single‑sided chipbreaker and 0.4 mm corner radius deliver consistent surface quality and predictable tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application support and fast supply. SCMT120404 T505 — ISO turning indexable insert for turning, square 12 mm, Tungaloy The SCMT120404 T505 is an ISO‑standard turning indexable insert engineered for efficient, economical machining of cast iron; its square form and 0.4 mm corner radius suit a wide range of external and internal turning operations. CVD-coated carbide grade T505 Optimised for economical cast iron turning Square ISO insert SCMT 120404, 4.76 mm thick Single-sided chipbreaker, 0.4 mm corner radius High economy and consistent edge life for cast‑iron turning The insert’s CVD‑coated carbide composition (grade T505) is selected for a favourable balance between tool life and cost‑efficiency when machining cast iron. The coating enhances wear resistance at the cutting edge, which reduces flank wear under typical turning feeds and speeds; this results in fewer indexings per workpiece batch and lower overall machining costs. For production environments where predictable tool change intervals matter, the combination of coating and substrate material supports steady productivity and reproducible component finish. Geometry designed to promote stable machining and chip control A square plate with a 0.4 mm corner radius and a single‑sided chipbreaker helps maintain cutting stability during interrupted and continuous cuts. The 7° relief angle and 90° basic angle provide a neutral cutting geometry that is forgiving on varying depths of cut, while the chipformer reduces the risk of long, stringy chips that complicate handling. The insert thickness of 4.76 mm and its ISO form provide robust support in the seat, which contributes to reduced vibration and improved surface integrity on turned parts. Compatibility, holder selection and practical workshop use Compatibility with the toolholder is determined by the insert form, relief angle, tolerance class, fixing method, size and thickness. The plate is supplied with a cylindrical hole and a single‑side countersink (40°–60°) for reliable clamping in standard ISO external holders or boring bars. For best results, select a holder and clamping set that match the SCMT geometry and the chosen cutting parameters; this ensures the insert’s performance is translated into faster cycle times and stable machining. Spare mounting screws and proper seat condition complete the system set‑up for industrial use. For technical application advice on the Tungaloy SCMT120404 T505 insert or to reserve stock through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6831846 Manufacturer SKU: TUN6831846 Stock SKU: 6831846-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 7° Basic angle: 90° Special features Material: carbide (cemented carbide) Coating: CVD Grade: T505 (for economical cast iron machining) Plate shape: square (SCMT) Hole: with hole, cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Typical application: external and internal turning System notes: compatibility determined by form, relief angle, tolerance class and fixation FAQ What materials is this insert intended for? The SCMT120404 T505 insert is formulated primarily for economical machining of cast iron; the T505 grade and its CVD‑coated carbide substrate provide good wear resistance and chip control when turning cast iron. Which holder types are compatible with this ISO insert? Compatibility depends on the ISO seat and clamping arrangement; the SCMT120404 is intended for standard ISO turning holders and boring bars that accept a square plate with a central hole and matching countersink. How does the chipbreaker affect performance? The single‑sided chipbreaker on this insert improves chip control and evacuation, helping to reduce entanglement and supporting consistent surface finish during both continuous and interrupted cuts. What are the key geometric values to consider when setting cutting data? Use the 0.4 mm corner radius, 7° relief angle and plate thickness 4.76 mm as reference values when selecting feed, depth of cut and spindle speed to balance surface quality and edge life. Is the SCMT120404 available with other grades or coatings? This listing describes the T505 grade with CVD coating; for other grades or coating combinations consult Metav Werkzeuge to discuss available alternatives and matching recommendations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120404 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide hardness and the T5115 universal grade for efficient cast iron turning; the ISO format ensures straightforward holder compatibility. Order the insert directly via Metav Werkzeuge or consult our specialists if further selection guidance is required. SCMT120404 T5115 – ISO square indexable turning insert for turning, Tungaloy The SCMT120404 T5115 is a CVD-coated carbide ISO turning insert designed for external and internal turning operations, optimised for cast iron with a controlled chipbreaker. ISO‑standard square turning insert SCMT120404 CVD-coated carbide grade T5115 Designed for cast iron machining Cylindrical hole with single-sided countersink Reliable performance for cast iron machining The combination of CVD-coated carbide and the T5115 grade provides a balanced mix of wear resistance and edge stability that benefits repetitive turning tasks in cast iron. This geometry and coating reduce flank wear and help maintain cutting edge integrity over longer periods, which in turn supports consistent surface finish and dimension stability. The universal character of the grade allows a pragmatic approach to process planning, reducing the need for frequent insert changes and contributing to predictable cycle times. Clear mounting and ISO compatibility to simplify tool plans Supplied in the ISO plate format and a square form, the insert is compatible with standard indexable turning holders when form, clearance, tolerance class, fixing, size and thickness match. The presence of a cylindrical hole with a single-sided countersink (40°–60°) ensures reliable clamping and repeatable seating in the tool body, which reduces setup time and variance between positions. This mechanical clarity supports stable machining and simplifies inventory management for production and maintenance teams. Geometry that improves cutting reliability and chip control The insert’s 0.4 mm corner radius and 7° clearance are chosen to deliver a balance between strength and cutting action: the radius helps to absorb cutting forces and avoid premature chipping, while the clearance angle reduces rubbing on the workpiece. The single-sided chipbreaker directs chips for efficient evacuation during external and internal turning, helping to prevent re-cutting and potential surface defects. For operations where chip control is critical, this combination offers a dependable route to fewer interruptions and safer swarf management. Practical benefits for workshop productivity By pairing a robust substrate with a modern coating and defined geometry, the insert supports productive machining with predictable tool life and consistent part quality. The square insert shape offers multiple indexing positions, extending effective life per insert and lowering tooling costs in the medium term. Process planners and shopfloor engineers will value the reduced variance between inserts, which helps when programming and verifying turning cycles for everyday production or batch work. For guidance on integrating Tungaloy grade T5115 into existing turning systems or to place an order through Metav Werkzeuge, contact Metav Werkzeuge directly via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide application-oriented advice to match insert, holder and machining strategy. Technical data Article number: 6864682 Manufacturer SKU: TUN6864682 SKU: 6864682-Tungaloy Product name: SCMT120404 T5115 Series: ISO-Drehwendeschneidplatten Core specifications Form: square Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Free clearance angle: 7° Lead/approach angle: 90° Hole: cylindrical with single-sided countersink (40°–60°) Materials & features Material: carbide (Hartmetall) Coating: CVD Grade: T5115 Chipbreaker: single-sided Application: turning (external and internal) Suitable for: cast iron Compatibility: ISO turning holders FAQ What materials is this insert optimised for? The SCMT120404 T5115 insert is a universal grade optimised for machining cast iron, providing a balanced combination of wear resistance and edge stability for this material group. Is the insert compatible with standard ISO turning holders? Yes, the insert follows ISO dimensions; compatibility depends on matching form, free angle, tolerance class, fixing, size and thickness to the chosen holder. What does the T5115 grade offer compared with other grades? T5115 is a CVD-coated grade that focuses on a compromise between tool life and edge stability, making it suitable for a wide range of cast iron turning applications. How does the chipbreaker affect machining? The single-sided chipbreaker directs chips away from the cutting zone to support secure evacuation, reducing the risk of re-cutting and enhancing surface consistency during turning. Can the insert be indexed multiple times? The square geometry allows multiple indexing positions, which extends the effective life per insert and supports economical tooling strategies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120404 T515 Wendeplatten - Tungaloy
The combination of a CVD‑coated carbide (T515) grade and a square ISO geometry (SCMT120404) delivers efficient, repeatable machining of cast iron with reliable chip control; the 0.4 mm corner radius and 4.76 mm plate thickness contribute to stable cutting conditions and long tool life. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SCMT120404 T515 Tungaloy indexable insert for turning (square, 0.4 mm radius) SCMT120404 T515 Tungaloy is an ISO‑standard indexable insert designed for external and internal turning operations, optimised for economical machining of cast iron. ISO‑standard square insert for turning CVD‑coated carbide grade T515 Single‑sided chipbreaker for cast iron 0.4 mm corner radius and 4.76 mm thickness Robust carbide and coating for economical cast‑iron turning The insert uses a CVD‑coated carbide matrix, identified as T515, which balances wear resistance with cost efficiency for serial production. The coating reduces adhesion and improves heat resistance during interrupted or continuous cuts, enabling higher cutting speeds compared with uncoated grades. As a result, the tool offers stable chip formation and consistent tool life when matched with appropriate cutting data and workpiece stability. Geometry and mounting that ensure process reliability With an ISO square form (SCMT) and a finished 0.4 mm corner radius, the insert supports both roughing and finishing passes while maintaining a low tendency for corner breakage. The plate is supplied with a central hole and a single‑side countersink (40°–60°) to ensure secure clamping and repeatable seating in compatible holders. The specified 7° relief angle and 90° cutting angle contribute to predictable cutting forces and straightforward holder selection within ISO standards. Designed chip control and practical production benefits The single‑sided chipbreaker is tuned for cast‑iron applications, directing chips away from the cutting zone to protect the workpiece surface and reduce the risk of recutting. This targeted chip control reduces cycle times by enabling more aggressive feed rates under stable conditions, while the moderate corner radius minimises subsurface damage and supports longer edge life. The result is a measurable improvement in throughput for workshops focusing on cast‑iron components. Material suitability and recommended use Manufactured from carbide, this insert is intended primarily for the economical machining of cast iron, with selection of an appropriate chipbreaker and grade determined by workpiece stability and desired cutting speed. The ISO specification and central hole design mean the insert is compatible with a wide range of external holders and boring bars, provided the holder matches form, clearance angle, tolerance class, fastening method, size and thickness. Practical selection guidance and cutting parameters are available to fine‑tune performance for specific machines and setups. Discuss the Tungaloy SCMT120404 T515 carbide insert with Metav Werkzeuge for tailored advice on cast‑iron turning; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6747831 SKU: 6747831-Tungaloy Manufacturer SKU: TUN6747831 ISO designation: SCMT120404 Facts Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 7° Cutting angle: 90° Special features Material: carbide Coating/grade: T515 (CVD‑coated carbide) Shape: square Chipbreaker: single‑sided Hole: with cylindrical hole + one‑side countersink (40°–60°) Typical application: external and internal turning, cast‑iron machining FAQ What materials is this insert optimised for? The SCMT120404 T515 Tungaloy insert is optimised for the economical machining of cast iron; the T515 grade and single‑sided chipbreaker provide effective chip control and wear resistance in this material class. Which holder types are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the insert’s ISO square geometry and central hole make it suitable for standard external holders or boring bars designed for SCMT plates. How does the T515 grade affect cutting performance? The T515 CVD coating enhances heat resistance and reduces adhesion, allowing for more consistent cutting speeds and improved edge life compared with uncoated carbide when machining cast iron. Can the insert be used for interrupted cuts? Yes; the combination of a robust carbide substrate and the CVD coating supports interrupted cutting, though machining parameters should be adjusted for stability and shock loads to maximise tool life. What benefits does the 0.4 mm corner radius offer? A 0.4 mm radius provides a balance between strength and surface finish: it increases edge strength for roughing while still allowing acceptable surface quality in finishing passes, reducing the risk of corner chipping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120404 T6215 Wendeplatten - Tungaloy
Combining CVD-coated carbide with ISO interchangeability, this insert offers reliable wear resistance and consistent surface finish for turning applications on stainless steel. Order the SCMT120404 T6215 insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT 120404 T6215 — ISO turning insert by Tungaloy, CVD-coated carbide The SCMT120404 T6215 is an ISO-style indexable turning insert engineered for stable to lightly interrupted turning of stainless steel components. CVD-coated carbide for high wear resistance ISO size 120404 for standard toolholders Optimised for stainless steel turning 7° relief angle and 0.4 mm corner radius Consistent tool life and predictable productivity The combination of a CVD surface layer and a robust carbide substrate provides elevated wear resistance and thermal stability, which translates into longer cutting edge life and fewer regrinds. For production environments where cycle time and surface quality matter, this grade reduces unplanned downtime and supports steady throughput. The result is measurable efficiency: fewer tool changes and a more predictable maintenance rhythm. Geometry tailored to stable stainless-steel turning The insert’s 0.4 mm corner radius and 7° relief angle optimise chip formation and contact conditions at the cutting edge, improving surface finish on demanding alloys. The 90° included angle yields a versatile cutting profile for both external and internal turning operations, while the one-sided chipbreaker is designed to control swarf when machining ductile, adhesive materials. These geometric choices make the insert well suited to operations requiring consistent dimensional accuracy and repeatable finishes. Easy integration into existing ISO tool systems As an ISO-indexable insert, compatibility is determined by form, relief angle, tolerance class, mounting method, size and thickness; matching these parameters ensures secure clamping and correct cutting geometry. The SCMT120404 format and the cylindrical hole with one-sided countersink (40°–60°) support standard clamping systems and spare-part logistics, simplifying inventory and tool-change routines. For application advice or verification of holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Practical handling and production confidence The CVD-coated grade T6215 balances wear resistance with predictable edge behaviour under stable to lightly interrupted cuts, reducing edge chipping and guarding component integrity. This contributes to lower scrap rates and steadier process capability, which in turn supports higher overall equipment effectiveness. The insert’s standard ISO form factor also enables fast replacement and minimal operator training, creating a practical, reliable solution for serial turning tasks. For tailored advice on specifying the right Tungaloy SCMT120404 T6215 insert for a given stainless steel application, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Manufacturer article number: 6903102 SKU: 6903102-Tungaloy Manufacturer SKU: TUN6903102 Model series: ISO-indexable turning inserts Designation: SCMT120404 T6215 Facts Size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 90° Special features Coating: CVD Material: carbide Chipbreaker: one-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning Suitable for: stainless steel FAQ What materials is this insert best suited for? The Tungaloy SCMT120404 T6215 insert is developed primarily for machining stainless steel under stable to lightly interrupted cutting conditions. Is the insert compatible with standard ISO external holders? Yes, the SCMT120404 form follows ISO dimensions; compatibility depends on matching form, relief angle, tolerance and thickness with the chosen holder. What does the T6215 grade provide compared with other grades? T6215 is a CVD-coated carbide grade offering enhanced wear resistance and thermal stability suited to adhesive materials like stainless steel, helping to extend tool life. How does the 0.4 mm corner radius affect part finish? A 0.4 mm radius helps produce a robust cutting edge that smooths the surface finish while maintaining dimensional control on turned components. Can the insert cope with light interruptions or hard inclusions? The insert is intended for stable to lightly interrupted conditions; for heavy interruptions or severe inclusions, consult tooling specialists for a suitable alternative. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, stable chip control, and ISO compatibility for efficient turning operations — order the SCMT120404 T9215 insert directly via Metav Werkzeuge or consult our specialists for application advice. SCMT 120404 T9215 indexable insert for turning — Tungaloy The SCMT120404 T9215 is a square ISO indexable insert designed for external and internal turning in medium steels, offering a balanced mix of wear resistance and fracture strength for continuous to lightly interrupted cuts. CVD-coated carbide T9215 for high wear resistance Optimised for medium steel machining ISO SCMT120404 square insert, 12 mm size 7° clearance angle and 0.4 mm corner radius Productive chip control and stable cutting for turning The insert delivers consistent chip formation thanks to its one-sided chipbreaker and the CVD coating. For machining medium steels, the T9215 grade combines enhanced wear resistance with fracture toughness, enabling longer tool life and fewer index changes. The chipbreaker geometry reduces built-up edge and supports steady material removal, which directly improves cycle times and lowers per-part costs. Secure clamping and ISO compatibility reduce setup risks Designed to the ISO SCMT120404 form, this square insert ensures predictable seating when matched to the correct holder. The cylindrical hole with single-sided countersink (40°–60°) promotes reliable screw engagement and repeatable positioning, while the standardised dimensions simplify tool inventory management. These factors reduce setup variability and support consistent surface finish across batches. Material and coating explained for practical choice Manufactured from solid carbide and CVD-coated, the cutting geometry is tailored for continuous and light interrupted cuts in a wide range of steel grades. The 0.4 mm corner radius offers a compromise between edge strength and surface finish, while the 4.76 mm plate thickness provides rigidity under typical turning forces. In practice, this means fewer insert chippings and improved process stability on production runs. Integration into production workflows The insert is intended for use with a matched external holder, clamp set and replacement screws as part of an ISO-compliant system. When paired with a suitable holder and correct cutting parameters, the insert supports stable tool life and repeatable results, helping to maintain throughput and minimise unplanned downtime. Selecting the right chipbreaker and grade for the workpiece material is critical to exploit the full benefit of the tool. Contact Metav Werkzeuge today to confirm suitability for specific turning tasks or to request cutting parameter recommendations for the SCMT120404 T9215 insert — Metav Werkzeuge is available for application support and order processing. Technical data Article number: 6774000-Tungaloy Manufacturer article number: 6774000 SKU manufacturer: TUN6774000 Numbers / Core technical data Insert designation: SCMT120404 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 90° Designs / Special features Material: carbide Coating: CVD coating, grade T9215 Shape: square insert Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning (external and internal) FAQ What workpiece materials are best suited for this insert? The SCMT120404 T9215 Tungaloy indexable insert (SKU 6774000-Tungaloy) is optimised for medium steels, combining wear resistance and toughness for productive turning in continuous to lightly interrupted cuts. Can this insert be used for internal turning as well as external turning? Yes — the ISO SCMT120404 form and chipbreaker design allow the insert to be used for both external and internal turning, provided a compatible holder and correct cutting parameters are used. What advantages does the T9215 grade provide? The T9215 grade features a CVD coating that improves wear resistance while maintaining fracture strength, resulting in longer tool life and reliable performance in medium steel machining. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius offers a balance between edge strength and surface finish: it increases resistance to chipping while delivering acceptable surface quality for general turning tasks. Is the insert compatible with standard ISO clamping systems? Yes — the insert follows the ISO SCMT120404 geometry and is compatible with holders and clamping systems designed for that standard form factor. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120404 T9225 Wendeplatten - Tungaloy
The combination of an ISO‑standard insert, its CVD‑coated T9225 grade and the compact 0.4 mm corner radius delivers reliable performance for medium to heavy steel turning; this reduces tool change frequency and supports consistent cycle times. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. SCMT 120404 T9225 turning insert by Tungaloy — ISO turning insert, CVD‑coated for medium to heavy steel SCMT120404 T9225 is an ISO‑form, square turning indexable insert designed for robust external and internal turning operations in industrial machining. ISO‑form square insert SCMT120404 CVD‑coated cemented carbide T9225 Suited for medium to heavy steel turning 7° relief angle, 0.4 mm corner radius Boosted productivity through stable cutting and long edge life The insert combines a CVD‑coated substrate with a robust universal grade T9225, engineered for changing engagement conditions and slightly interrupted cuts. The coating enhances wear resistance while the cemented carbide core maintains edge stability, which together support longer tool life and fewer interruptions in production. This leads to measurable improvements in machining uptime and predictable process cycles, an essential benefit for high‑mix or batch production environments. Simple compatibility and secure clamping for reliable set‑up Compatibility with holders is determined by the insert’s ISO form, size and thickness, together with the specified 7° relief angle and the tolerance class. The 12 mm square format with a 4.76 mm thickness and a central hole (cylindrical hole plus one‑sided countersink 40°–60°) ensures positive axial location and reliable clamping. This configuration reduces indexing errors and supports fast, repeatable mounting in standard external holders and boring bars, improving setup consistency on the shop floor. Tailored for steel applications and predictable chip control Designed as a universal style for the mid to heavy end of steel machining, the grade provides balanced toughness and wear resistance so that interruptions or variable cuts are tolerated without premature chipping. The single‑sided chipbreaker promotes controllable chip formation when paired with appropriate feed and depth settings, reducing the risk of built‑up edge and improving surface finish in continuous turning operations. Economic handling and process security for production environments The modest 0.4 mm corner radius enables a blend of edge strength and dimensional control suitable for finishing to medium roughing passes. Using an ISO‑standard insert in the SCMT family simplifies inventory management and reduces the number of special items held in stock. Combined with the insert’s construction, this contributes to lower per‑part tooling costs, predictable tool change intervals and improved process security across varied steel components. For application guidance, stock availability or tailored recommendations on using the CVD‑coated T9225 inserts from Tungaloy, please contact Metav Werkzeuge—our consultants are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6781169 Manufacturer SKU: TUN6781169 Model series: ISO‑Drehwendeschneidplatten Facts ISO designation: 120404 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 7° Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Special features Material: cemented carbide Coating/type: CVD‑coated carbide, grade T9225 Form: square Chipbreaker: single‑sided Typical application: external and internal turning FAQ What materials is this insert intended for? The SCMT120404 T9225 turning insert is optimised for medium to heavy steel machining and offers toughness for slightly interrupted cuts thanks to the CVD‑coated T9225 grade. How is the insert secured in the holder? Clamping depends on form, relief angle and tolerance; the square 12 mm insert uses a central hole with a cylindrical bore and a one‑sided countersink to ensure secure axial location and repeatable clamping. Can this insert be used for internal boring? Yes; the insert’s ISO form and single‑sided chipbreaker make it suitable for both external turning and certain internal turning applications when mounted in a compatible boring bar. What advantages does the T9225 grade provide? The T9225 grade combines wear resistance with sufficient toughness to handle variable engagement and light interruptions, supporting longer edge life and consistent results in steel turning. Which insert dimensions are critical for selecting a compatible holder? Key dimensions are the ISO code 120404, the 12 mm size, 4.76 mm thickness, 7° relief angle and the 0.4 mm corner radius; these determine fit, clearance and orientation in the intended holder. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SCMT 120404 T9225 Wendeplatten - Tungaloy
Benefit from a robust combination of cost‑effective cutting performance and reliable chip control provided by a CVD‑coated carbide grade. The insert delivers stable results in medium to heavy steel turning and fits ISO holders when matched by form, relief angle and thickness; order the component directly via Metav Werkzeuge or consult our specialists for guidance. SCMT 120404 T9225 ISO turning insert — Tungaloy (CVD‑coated carbide, 0.4 mm radius) The SCMT120404 T9225 is an ISO‑indexable turning insert engineered for medium to heavy steel turning, offering a robust, CVD‑coated carbide grade and a 0.4 mm nose radius for adaptable surface finish. Universal CVD‑coated carbide grade T9225 0.4 mm nose radius for adaptable finishes 7° relief angle for stable cutting Square insert, 12 mm size, 4.76 mm thick Cylindrical hole with single‑side countersink High productivity for medium to heavy steel turning The CVD‑coated carbide grade T9225 combines toughness and wear resistance to maintain cutting performance under varying engagement conditions. As a universal grade, it is suited to mixed batch work and operations where occasional interrupted cuts occur. The coating increases surface hardness and reduces flank wear, which means fewer tool changes and improved uptime on the shop floor. Production planners will appreciate the balance between tool life and cutting reliability when machining medium to heavy steel components. Consistent chip control and finish with minimal setup changes Chip flow and surface quality are governed by the insert geometry: the one‑sided chipbreaker and 0.4 mm nose radius guide chip evacuation and influence the final finish. A modest nose radius supports both dimensional control and acceptable surface texture without demanding excessive cutting forces. The 7° relief angle gives a stable cutting edge engagement that reduces rubbing and heat build‑up, prolonging the life of the insert under mixed cutting conditions. For non‑specialists: the chipbreaker reshapes chips to prevent tangling and improve coolant access, reducing machine interruptions. Seamless integration into ISO holder systems Compatibility is secured when an insert is matched to a holder by key parameters: form, relief angle, tolerance class, fastening, size and thickness. The insert is a square profile with a nominal 12 mm size and 4.76 mm thickness, and features a cylindrical hole with single‑side countersink (40°–60°) to ensure secure clamping and repeatable positioning. Typical system components include an ISO indexable external holder or a boring bar, plus a suitable backing plate or clamp set and replacement screws for maintenance. Correct matching reduces vibration and improves surface quality without additional complex adjustments. Material and grade explained for confident tooling decisions The CVD coating on this carbide substrate enhances wear resistance and edge stability, supporting longer runs and consistent dimensional accuracy. The grade’s design promotes stable chip formation and robust edge behaviour during light interruptions or variable feeds — factors that reduce scrap and machining cost per part. Brand reliability is another consideration: Tungaloy’s production standards and grade development target predictable performance in workshop environments. If cutting data or feed/speed recommendations are required, technical assistance is available to help integrate the insert into existing processes. For tailored cutting data and prompt supply of Tungaloy SCMT120404 T9225 inserts, contact Metav Werkzeuge by email or phone for expert advice and ordering support Technical data Article number: 6781209 Manufacturer SKU: TUN6781209 SKU: 6781209-Tungaloy Manufacturer: Tungaloy Product designation: SCMT120404 T9225 Tungaloy turning insert Model series: ISO turning inserts Facts Size: 12 mm Thickness: 4.76 mm Nose radius: 0.4 mm Relief angle: 7° Included angle: 90° Special features Material: carbide Coating/grade: CVD‑coated T9225 Chipbreaker: one‑sided Plate shape: square Hole: with cylindrical hole and single‑side countersink (40°–60°) Typical application: turning, external and internal turning on steel System components: ISO external holder or boring bar, backing plate/clamp set, replacement screws Suited to interrupted cuts and variable engagement FAQ What materials is this insert suitable for? The SCMT120404 T9225 is designed primarily for medium to heavy steel turning and provides reliable performance on a variety of steels where toughness and wear resistance are required. How does the T9225 grade affect tool life? The CVD‑coated T9225 grade increases surface hardness and improves wear resistance, which typically extends insert life and reduces the frequency of tool changes in standard turning operations. Which holder features are required for compatibility? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the insert’s square 12 mm profile and 4.76 mm thickness must match the chosen ISO holder or boring bar. Is the insert suitable for interrupted cuts? Yes — the robust universal grade and carbide substrate of the SCMT120404 T9225 are intended to tolerate occasional interruptions and variable engagement conditions. What does the chipbreaker do and why is it important? The one‑sided chipbreaker reshapes and controls chip flow to prevent tangling, improve coolant access and reduce machine downtime, enhancing process stability with this insert. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SCMT 120408 AH120 Wendeplatten - Tungaloy
Precision, sharpness and process security from a single insert: the PVD-coated AH120 grade delivers reliable cutting performance and resistance to edge breakage while the SCMT geometry with a 0.8 mm corner radius and 90° square form suits face, shoulder and slot milling. Order the insert directly via Metav Werkzeuge or consult our technical advisors for tailored application assistance. SCMT120408 AH120 — SCMT 120408 AH120 milling indexable insert for milling by Tungaloy SCMT120408 AH120 is a square, PVD-coated carbide insert designed for use in Tungaloy milling systems for plan, shoulder, slot, high-feed and contour milling operations. PVD-coated carbide grade AH120 Sharp cutting edge with process security Square 90° form with 0.8 mm corner radius Cylindrical hole with one-sided countersink Consistent performance through optimised material and coating The insert is manufactured from carbide and finished with a PVD-coated surface in the AH120 grade, offering an excellent balance between wear resistance and edge toughness. This composition is especially effective where a sharp cutting edge and consistent machining are required; the coating reduces adhesion and wear at elevated cutting temperatures, while the substrate sustains the mechanical load. The result is fewer interruptions for tool changes and a predictable process window that supports steady production rates and higher overall equipment effectiveness. Geometry tailored for secure clamping and versatile milling A square form with 90° cutting angle and 0.8 mm corner radius provides predictable deflection characteristics and a resilient cutting edge for shoulder and face milling. The insert’s cylindrical hole with one-sided countersink (40°–60°) ensures a positive and repeatable seat in compatible cutter bodies; correct seating is essential for vibration damping and consistent cutting depths. For operations that shift between finishing and higher material removal rates, this geometry helps maintain surface quality while offering stable tool life. Chip control and handling for efficient cycle times Equipped with a single-sided chipbreaker, the insert manages chip formation across a broad range of feeds and depths, reducing the risk of re-cutting and improving evacuation in peripheral and slot milling. The controlled chip flow lowers thermal load on the cutting edge and assists in maintaining a uniform surface finish. In practical terms, the improved chip behaviour shortens cycle time variability and supports faster downstream handling and inspection. System compatibility and application guidance These indexable inserts form part of a modular milling system and require matching of insert seat, geometry and cutter body to function correctly. The insert is intended for Tungaloy milling systems and is applicable to plan, shoulder, slot, high-feed and contour milling depending on the chosen cutter family. When assembled in a correctly specified milling body, the combination of PVD coating, AH120 grade and robust seat design delivers repeatable results and process security across medium to demanding machining tasks. For precise milling with Tungaloy quality, order SCMT120408 AH120 inserts from Metav Werkzeuge or request application advice from our technical team at Metav Werkzeuge — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 6811413 SKU: 6811413-Tungaloy Manufacturer SKU: TUN6811413 Insert designation: SCMT120408 Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Insert size: 12 mm Thickness: 4.76 mm Clearance angle: 7° Cutting angle: 90° Special features Material: carbide Coating: PVD-coated, grade AH120 Form: square Hole style: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Typical applications: face, shoulder, slot, high-feed and contour milling Series: indexable milling inserts for Tungaloy milling systems FAQ What materials is the SCMT120408 AH120 suitable for? The SCMT120408 AH120 insert, in PVD-coated AH120 carbide, is designed for general milling tasks and performs well across a broad range of materials where a sharp cutting edge and process security are required. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius balances edge strength and surface finish; it reduces the likelihood of edge chipping compared with smaller radii while still supporting good surface quality in finishing passes. Is this insert compatible with non-Tungaloy cutter bodies? The insert is intended for Tungaloy milling systems; compatibility requires matched seat geometry and clamping provisions. For non-Tungaloy bodies, verify seat and clamping conformity before use. What is the benefit of the single-sided chipbreaker? The single-sided chipbreaker promotes reliable chip formation and evacuation under varying feeds and depths, which helps maintain consistent cutting conditions and surface quality. Can the insert handle interrupted cuts? The AH120 grade is designed for wear and breakage resistance, offering improved robustness in interrupted or semi-interrupted milling compared to less tough grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide grade AH6225 and the 0.8 mm corner radius for reliable medium-duty milling of stainless steel; the combination of sharp, stable cutting geometry and secure clamping supports predictable cycle times and reduced tool changes. Order the SCMT120408 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT120408 AH6225 indexable milling insert for milling — Tungaloy The SCMT120408 AH6225 is a square indexable insert designed for Tungaloy milling systems, engineered for medium machining of stainless steel with a sharp, stable cutting edge and secure clamping. PVD-coated carbide grade AH6225 Optimised for stainless steel machining Square insert with 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Consistent cutting under variable conditions The PVD-coated carbide composition of this insert provides a balanced combination of edge sharpness and wear resistance, making it suitable for stainless steel under changing cutting conditions. The AH6225 grade is formulated to deliver a crisp initial edge while retaining stability during interrupted cuts and medium depths of cut. This yields more consistent surface quality and fewer unexpected tool changes, supporting higher overall equipment effectiveness. Secure clamping for repeatable results A secure clamping interface is central to repeatability: the square insert features a cylindrical hole with a single-sided countersink (40°–60°) to align reliably with compatible tool bodies. The plate thickness of 4.76 mm, the 12 mm seat size and the 7° clearance angle combine to reduce micro-movements at the cutting edge; the nominal contact angle of 90° supports stable load distribution. Together, these elements reduce vibration and support repeatable component tolerances in serial milling operations. Versatility across common milling operations This insert is suitable for a range of milling tasks — from face and shoulder work to slotting, high-feed and contouring — depending on the mating tool family. The 0.8 mm corner radius offers a compromise between strength and surface finish: it raises edge robustness compared with smaller radii while still enabling good workpiece quality. Inventory complexity can be reduced by using a universal grade that covers multiple stainless steel machining scenarios. Coating and grade explained for pragmatic selection The AH6225 designation denotes a PVD-coated carbide solution optimised for stainless steel machining at moderate cutting parameters. The coating improves surface hardness and heat resistance, slowing flank wear and preserving the geometry of the sharp cutting edge. For applications requiring higher mechanical toughness or different workpiece materials, selection of an alternative grade or geometry is advisable; however, AH6225 performs well where a balance of sharpness and edge security is required. For process inquiries or tailored recommendations based on part geometry and machine capability, contact Metav Werkzeuge — Metav Werkzeuge can advise on matching insert geometry to the chosen milling body and supply the SCMT120408 AH6225 directly Technical data Article number: 6903307 SKU: 6903307-Tungaloy Manufacturer SKU: TUN6903307 Designation: SCMT120408 AH6225 Model series: Milling indexable inserts Core data Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Main angle: 90° Special features Material: carbide Grade/coating: AH6225 (PVD-coated) Shape: square Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: milling Typical uses: face, shoulder, slot, high-feed, contour milling depending on tool family FAQ Which materials is this insert intended for? The SCMT120408 AH6225 insert is formulated primarily for stainless steel; the AH6225 grade and PVD coating focus on improved wear resistance and edge retention when machining stainless grades. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength compared with smaller radii, improving durability in interrupted cuts while still allowing acceptable surface finish for most medium-duty milling tasks. Will the insert fit any Tungaloy milling body? The insert will function only when the insert seat, geometry and milling body are technically compatible; matching the seat type and clamping system of the Tungaloy tool family is essential for secure clamping and repeatable performance. What does the cylindrical hole with countersink provide? The cylindrical hole with a single-sided countersink (40°–60°) ensures correct axial positioning and supports reliable clamping, which reduces vibration and enhances dimensional consistency during milling. Is this insert suitable for high-feed milling? Depending on the specific milling body and cutting parameters, the insert can be used for high-feed operations within the limits of medium machining; final suitability should be confirmed against machine capability and toolholder design. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 AH6225 Wendeplatten - Tungaloy
Benefit from a combination of durable PVD-coated carbide and a precise 0.8 mm corner radius for consistent milling of stainless steels; order the matching insert directly via Metav Werkzeuge or consult our specialists for application advice. SCMT120408 AH6225 indexable insert for milling, 90° by Tungaloy SCMT120408 AH6225 is a square indexable milling insert designed for milling operations where a sharp, stable cutting edge and reliable performance in stainless steels are required PVD-coated carbide AH6225 for stainless steels Square insert 12 x 12 mm, thickness 4.76 mm Cylindrical hole with single-sided countersink 40°–60° 7° clearance angle, 0.8 mm corner radius Precision and performance for demanding stainless‑steel milling The SCMT120408 AH6225 Tungaloy insert is engineered to combine a PVD-coated carbide grade with a geometry that supports both edge sharpness and stability. This results in a cutting edge that sustains consistent chip formation when machining stainless steels, reducing vibration and minimising workpiece distortion. The insert’s square form and robust thickness provide contact stability in the pocket, while the single-sided chipbreaker directs chips efficiently to preserve tool life and surface finish. This technical combination means fewer tool changes and predictable component tolerances in serial production. Compatibility and ease of integration into milling systems Designed for use in Tungaloy milling systems, the insert requires a matching pocket geometry, clamping screw and, where applicable, a supporting shim to ensure proper seating. The cylindrical hole with a single-sided countersink (40°–60°) guarantees secure clamping and repeatable positioning during index changes. With a 7° clearance angle and 0.8 mm corner radius, the insert suits face, shoulder, slot, high-feed and contour milling applications depending on the chosen cutter body. This compatibility reduces setup time and enables rapid integration into existing tool inventories while maintaining cutting stability across varied operations. Efficiency, reproducibility and quality of finish The AH6225 grade is a versatile PVD-coated option optimised for a wide range of stainless steels, balancing wear resistance and edge toughness. The PVD coating enhances resistance to built-up edge and thermal softening, allowing for stable performance under fluctuating cutting conditions. As a result, the insert contributes to a consistent surface finish and repeatable dimensional accuracy, supporting higher process uptime and a favourable cost-per-part equation. For production runs where process reliability and predictable tool life matter, this insert offers a pragmatic compromise between economy and performance. For technical compatibility checks or to secure the SCMT120408 AH6225 insert from Metav Werkzeuge, please contact Metav Werkzeuge for detailed advice and ordering support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903308 Numbers / Core technical data Insert designation: SCMT120408 ISO code: 120408 Size: 12 x 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 90° Countersink angle: 40°–60° Special features / Applications Material: carbide Coating: PVD-coated Grade: AH6225 (universal for stainless steels) Shape: square Hole: with cylindrical hole and single-sided countersink Chipbreaker: single-sided Typical uses: face, shoulder, slot, high-feed and contour milling System components: milling body, indexable insert, clamping screw, supporting shim (if required) FAQ What materials is this insert suitable for? The SCMT120408 AH6225 insert is specified for stainless steels, the AH6225 grade providing a balance of edge toughness and wear resistance suitable for varied stainless‑steel applications. How is the insert secured in the cutter body? The insert features a cylindrical hole with a single-sided countersink (40°–60°) to match standard clamping screws and ensure repeatable seating in compatible Tungaloy milling bodies. Can this insert be used for high-feed milling? Yes, depending on the assigned cutter family and machining strategy, the insert is suitable for high-feed milling as well as face, shoulder and contour operations. What benefits does the PVD coating provide? The PVD coating enhances thermal and adhesive wear resistance, reduces built‑up edge on stainless‑steel workpieces and helps maintain a sharper cutting edge under variable conditions. Is the corner radius suitable for finishing? The 0.8 mm corner radius offers a compromise between strength and edge definition; it supports good surface quality while providing robustness against edge chipping during interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com