SCMT 120408 AH6235 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated cemented carbide AH6235, a precise 0.8 mm corner radius and a secure clamping interface for reliable milling performance; order the SCMT120408 AH6235 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT 120408 AH6235 – Indexable milling insert for milling applications by Tungaloy The SCMT120408 AH6235 is an indexable milling insert designed for Tungaloy milling systems, offering reliable performance in shoulder, face, slot and high-feed milling where insert seat, geometry and cutter body must match technically PVD-coated cemented carbide AH6235 for stainless applications 0.8 mm corner radius for precise shoulder milling Square 12 mm insert with 90° cutting angle Cylindrical hole + one-sided countersink for secure clamping Improved cutting stability for demanding stainless applications The PVD-coated carbide AH6235 grade delivers enhanced toughness for machining rostfreier Stahl and other difficult-to-cut alloys. Thanks to the tougher substrate and the PVD layer, the insert sustains intermittent cuts and operations with a higher risk of edge breakout, reducing unexpected tool changes. This results in a measurable improvement in process reliability and more consistent cycle times when performing planing, shoulder and contour milling. Accurate geometry that supports repeatable results With a 12 mm size and 4.76 mm plate thickness, the square insert presents a true 90° cutting angle and a 0.8 mm corner radius, giving a stable contact zone and defined engagement for shoulder milling and slot entry. The single-sided chipbreaker simplifies chip flow management and is optimised for the insert’s geometry, which helps achieve predictable tool life and consistent surface finish without complex parameter adjustments. Secure mounting and system compatibility for reduced setup time The insert includes a cylindrical hole with a one-sided countersink (40°–60°) to ensure positive seat location and secure clamping in compatible Tungaloy cutter bodies. When seat, geometry and cutter body match, assembly is straightforward and repeatable, minimising indexing time and the chance of seating errors. This physical compatibility supports efficient tool changeovers and keeps spindle downtime to a minimum. Application focus and selection guidance Designed primarily for milling, the insert is suitable for face, shoulder, slot, high-feed and contour milling operations depending on the assigned cutter family. The grade’s combination of toughness and PVD protection makes it particularly appropriate for interrupted cuts and components prone to edge chipping, providing a pragmatic balance between wear resistance and fracture resistance for production environments. For high-reliability stainless steel milling with Tungaloy, contact Metav Werkzeuge for availability and tailored advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6903475 Manufacturer: Tungaloy Manufacturer SKU: TUN6903475 Model series: Fräswendeschneidplatten WPL designation: SCMT120408 AH6235 Facts Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 90° Clearance angle: 7° Special features Cemented carbide material, PVD-coated (AH6235) Square insert form Cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Intended use: milling; suited to interrupted cuts and applications with high breakout risk FAQ Is this insert suitable for machining stainless steel? The SCMT120408 AH6235 Tungaloy indexable insert is formulated as a tougher PVD-coated carbide grade specifically intended for rostfreier Stahl and applications with interrupted cuts. What cutter bodies are compatible with this insert? Compatibility requires a matching Tungaloy milling body where the insert seat, geometry and cutter body conform technically to the SCMT120408 form and the system’s specifications. How does the AH6235 grade affect tool life? The AH6235 grade balances fracture resistance and wear behaviour; the PVD coating improves surface hardness while the tougher substrate reduces premature edge chipping, typically extending usable tool life in demanding stainless applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade AH6235, a robust 0.8 mm corner radius, and secure screw clamping for reliable milling performance in demanding applications; order the insert directly via Metav Werkzeuge or consult the technical advisors for compatibility and selection. SCMT120408 AH6235 – Tungaloy milling insert for rostfreier Stahl, 12 mm, 0.8 mm radius The SCMT120408 AH6235 is a PVD-coated carbide indexable insert designed for Tungaloy milling systems, optimised for rostfreier Stahl and interrupted cutting where chipping risk is increased PVD-coated carbide grade AH6235 Optimised for rostfreier Stahl & interrupted cuts Square 12 mm insert with 0.8 mm corner radius Cylindrical hole with 40°–60° countersink High productivity for rostfreier Stahl and interrupted machining The selected AH6235 grade is a PVD-coated, tougher carbide formulation developed to resist fracture in interrupted cuts and to handle the work-hardening tendency of rostfreier Stahl. This composition supports a more stable cutting edge, which translates into longer tool life and fewer indexings during production runs. The 0.8 mm corner radius increases edge robustness for shoulder and face milling, while the square geometry contributes to repeatable performance across multiple stations. Secure clamping and system compatibility for consistent results Designed for use with matching Tungaloy milling bodies, the insert requires correct seat geometry and toolbody compatibility to deliver the stated performance. The cylindrical hole + one-sided countersink (40°–60°) provides reliable screw clamping and consistent seating; the 4.76 mm plate thickness and 7° clearance reduce the risk of rubbing and improve rigidity under load. The insert’s 90° cutting angle makes it well suited to shoulder operations and applications where positive axial engagement is required. Reduced downtime and improved shop-floor efficiency A one-sided chipbreaker simplifies chip control and evacuation during face, shoulder, slot, high-feed and contour milling when paired with the appropriate cutter body from the same system family. Fewer edge failures and predictable wear progression lower setup frequency and tool change interruptions, contributing to a steadier production flow. Specification consistency — from size 12 mm to clamping style — helps standardise tool inventories and speeds up replenishment cycles for manufacturing operations. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy inserts into current tooling systems or to request confirmation of seat compatibility; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903477 Manufacturer SKU: TUN6903477 SKU: 6903477-Tungaloy Series: Milling indexable inserts Material: carbide (PVD-coated) Facts Size (inscribed circle): 12 mm Corner radius: 0.8 mm Plate thickness: 4.76 mm Clearance angle: 7° Cutting angle: 90° Special features Grade/coating: AH6235, PVD-coated carbide Shape: square Hole: with cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: Milling – face, shoulder, slot, high-feed, contour (dependent on cutter family) Suitability: designed for rostfreier Stahl, interrupted cuts and applications with increased chipping risk FAQ What materials is this insert best suited for? The insert in grade AH6235 is formulated for machining rostfreier Stahl and is particularly effective in interrupted cutting conditions where increased fracture resistance is required. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius improves edge strength for shoulder and face milling, reducing the likelihood of chipping compared with finer radii while maintaining acceptable surface finish. Is the insert compatible with all Tungaloy milling bodies? The insert fits Tungaloy milling systems that match the seat geometry and clamping design; the plattensitz, geometry and cutter body must be technically compatible for secure clamping and optimal results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide, a universal AH725 grade and precise geometry for reliable milling performance; order the inserts directly via Metav Werkzeuge or consult our technical team for application-specific matching. SCMT120408 AH725 milling insert for Fräsen — Tungaloy The SCMT120408 AH725 is a PVD-coated carbide indexable insert designed for Tungaloy milling systems, suitable for face, shoulder, slot and high-feed milling tasks. PVD-coated carbide for high process security Universal grade for steel and rostfreier Stahl Square 12 mm plate with 0.8 mm corner radius Cylindrical hole with single-side countersink Consistent cutting performance through a universal, PVD-coated grade The insert is manufactured from carbide and finished with the AH725 PVD coating, delivering stable chip formation and consistent edge life across mixed batches. The selected grade is described as universal and fracture-resistant, which translates into fewer tool changes in mixed production runs and improved machine uptime. The PVD-coated surface improves wear resistance under interrupted cuts and maintains dimensional stability of the cutting edge; this is particularly beneficial for operations demanding high process security rather than extreme-speed optimisation. Geometry and clamping that support secure, predictable machining A square, 12 mm plate form combined with a 0.8 mm corner radius and a 4.76 mm plate thickness gives a balance between strength and edge access for shoulder and face milling. The insert features a cylindrical hole with a single-side countersink (40°–60°), designed for accurate seating and repeatable clamping; the 7° relief angle reduces rubbing at entry while the 90° included angle suits many general milling profiles. The designation as an indexable plate means the cutting edge may be rotated when one edge wears, helping to extend usable life while preserving workpiece quality. Practical advantages for workshop planning and tool selection These indexable inserts are intended for installation in matching Tungaloy cutter bodies; plate seat, geometry and cutter body must be technically compatible to achieve rated performance. Typical applications include planing, shoulder milling, grooving, high-feed and contouring operations depending on the chosen tool family. The universal AH725 grade is especially useful where material changes occur between steel and rostfreier Stahl, removing the need for multiple dedicated grades and simplifying inventory. For procurement and process planning, this insert supports predictable cycle times and easier downstream finishing due to its controlled edge behaviour. For compatibility checks, availability and to specify the correct SCMT120408 AH725 Tungaloy insert for a given cutter body, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on the ideal combination for the application. Technical data Article number: 6995220 SKU: 6995220-Tungaloy Manufacturer SKU: TUN6995220 Model series: Milling indexable inserts Core dimensions ISO designation: 120408 Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 90° Features & compatibilities Grade/coating: AH725 (PVD-coated carbide) Material: Hartmetall (carbide) Plate form: square Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-side Application: Fräsen (milling) System note: for use in Tungaloy milling systems; seat, geometry and body must match FAQ Which cutter bodies are compatible with this insert? The SCMT120408 AH725 insert is designed for Tungaloy milling systems; compatibility requires matching the plate seat and geometry of the cutter body to the SCMT120408 specification. For which materials is this grade appropriate? The AH725 grade on the SCMT120408 is a universal, fracture-resistant type suited for machining steel and rostfreier Stahl, making it a good choice where materials vary. How does the hole and countersink influence clamping? The cylindrical hole with a single-side countersink (40°–60°) provides secure seating and repeatable clamping, which helps maintain dimensional accuracy during interrupted cuts. What milling tasks suit this insert best? Depending on the tool family, this indexable plate supports face milling, shoulder milling, slotting, high-feed and contouring operations while offering stable chip control. Why choose the AH725 PVD coating? The AH725 PVD coating enhances wear resistance and edge stability, improving process security under mixed-material production and interrupted cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated AH725 carbide grade, a compact square 12 mm geometry with 0.8 mm corner radius, and dependable seating compatibility to maintain process stability in milling operations; order the insert directly via Metav Werkzeuge or request application guidance from our consultants. SCMT120408 AH725 indexable milling insert for Fräsen — square 12 mm, 0.8 mm radius (Tungaloy) The SCMT120408 AH725 is a PVD‑coated carbide indexable insert engineered for general milling tasks. It is intended for use in Tungaloy milling systems where insert seat, geometry and cutter body match technically, and is suited to machining steel and stainless steels in face, shoulder, slot, high‑feed and contour operations. *PVD-coated carbide grade AH725 for reliability *Universal grade for steel and stainless steels *Square 12 mm with 0.8 mm corner radius Stable machining with a universal, PVD‑coated carbide grade The combination of a PVD coating and the AH725 substrate delivers a universal, fracture‑resistant grade tailored for variable material mixes and demanding process security. The coating reduces flank wear and improves resistance to built‑up edge formation, which translates into more consistent cycle times and fewer unscheduled tool changes. For shops working across mixed batches of low‑alloy and corrosion‑resistant materials, this grade provides a balanced compromise between wear resistance and toughness, supporting longer cutting intervals without sacrificing surface finish. Geometry focused on chip control and versatile milling tasks A square 12 mm profile with a 0.8 mm corner radius and a 90° included angle offers a robust geometry for planing, shoulder and slot milling where strength and edge stability are required. The insert features a single‑sided chipbreaker for directed chip flow, improving chip evacuation in moderate to heavy cuts. The insert is supplied with a cylindrical hole and single‑side countersink (40°–60°) to ensure secure clamping; correct seating and matching of the insert to the cutter body are essential to achieve repeatable cutting conditions and to prevent assembly‑related variances. Efficient production through predictable tool life and system compatibility Designed for use in complete milling systems, the insert forms part of a system assembly consisting of the cutter body, the indexable insert, a clamp screw and, where required, a shim. Matching geometry and seat form between insert and body is critical for achieving repeatable performance and maximising tool life. The grade performs particularly well with smaller‑diameter cutters and where high demands on process reliability exist, enabling consistent surface quality and reduced scrap rates. Clear identification (manufacturer article number and OEM SKU) supports traceability and reordering in production environments. Contact Metav Werkzeuge for application‑specific recommendations on the SCMT120408 AH725 insert and to request compatible cutter body suggestions or technical data sheets via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6856786 Manufacturer SKU: TUN6856786 SKU: 6856786-Tungaloy Model series: Fräswendeschneidplatten Material: Hartmetall Facts Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Included angle: 90° Clearance angle: 7° Special features Grade/coating: AH725, PVD‑coated carbide Shape: square insert Chipbreaker: single‑sided Hole: cylindrical hole with single‑side countersink (40°–60°) Application: milling (face, shoulder, slot, high‑feed, contour) depending on tool family System components: cutter body, indexable insert, clamp screw, shim (if required) Suitability: steel and stainless steels; good choice for mixed‑material machining and high process security FAQ What materials is this insert suitable for? The SCMT120408 AH725 insert is developed for machining steel and stainless steels; the AH725 grade offers a balanced combination of toughness and wear resistance for variable material mixes. Which milling operations are appropriate with this insert? The insert is suitable for face milling, shoulder milling, slotting, high‑feed and contour milling depending on the assigned cutter family and cutting parameters. How does the chipbreaker affect performance? The single‑sided chipbreaker on the SCMT120408 AH725 promotes controlled chip formation and evacuation, supporting stable cutting in medium to heavy passes and improving process reliability. What must be checked before assembly? Ensure that the insert seat, insert geometry and cutter body match technically; correct seating and the specified cylindrical hole with countersink are required for secure clamping and repeatable cutting conditions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SCMT 120408 AH725 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH725 grade, a precise r0.8 corner radius and secure clamping features for reliable, productive milling; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SCMT 120408 AH725 Tungaloy indexable milling insert (PVD carbide, r0.8) The SCMT120408 AH725 is an indexable milling insert designed for general milling operations and compatible with Tungaloy milling systems. PVD-coated universal grade AH725 Suited for steel and stainless steels Square 12 mm insert, 4.76 mm thick Carbide insert with r0.8 corner radius Consistent cutting performance for varied milling tasks The combination of a PVD-coated surface and a fracture-resistant carbide substrate delivers consistent edge life and reproducible results in repeated operations. The universal AH725 grade is formulated to maintain a stable cutting edge when faced with mixed materials and fluctuating cutting conditions, which reduces the need for frequent tool changes. With its single-sided chipbreaker, the insert supports controlled chip formation, promoting stable machining routines and lowering the risk of unexpected burrs or tool damage in face, shoulder or contour milling. Broad application range and reliable material handling Designed for a wide range of operations — from face and shoulder milling to slotting and high-feed strategies depending on the chosen tool family — this insert supports diverse production demands. The AH725 grade is particularly advantageous where process security is essential, offering reliable performance across steel and stainless steels. The single-sided chip control geometry helps maintain surface quality while reducing cycle-time variability, making the insert suitable for shop floors that require both adaptability and predictable output. Precise geometry for secure clamping and repeatability Square form and measured dimensions aid predictable assembly and repeatable tool setup. The insert is a 12 mm square, 4.76 mm thick, with a 90° seating angle and a 7° relief angle; a central hole and a cylindrical bore plus single-sided countersink (40°–60°) ensure reliable clamping force when paired with the correct milling body. The r0.8 corner radius provides a balance between edge strength and achievable surface finish. Important: insert seat, geometry and milling body must be technically matched to secure the expected performance and clamping stability. Process security and economical machining A universal, explosion-resistant grade such as AH725 supports long tool life under variable conditions, improving overall equipment effectiveness. Consistent chip control and robust edge retention contribute to lower downtime and fewer scrap parts, translating into measurable production benefits. For operations where dependable repeatability and minimal adjustment time are priorities, this insert gives a robust basis for productive milling cycles while simplifying tool management and inventory choices. For tailored advice on integrating Tungaloy AH725 inserts into specific milling setups, contact Metav Werkzeuge for application support and fast supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6856714 Manufacturer SKU: TUN6856714 Model series: Fräswendeschneidplatten Material: Hartmetall Brand: Tungaloy Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Seating angle: 90° Special features Grade/coating: AH725, PVD-coated Chipbreaker: single-sided Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Insert shape: square Typical applications: face, shoulder, slot, high-feed and contour milling (depending on tool family) System note: insert seat, geometry and milling body must match FAQ What materials is this insert suitable for? The SCMT120408 AH725 insert is specified for machining steel and stainless steels; the AH725 grade is developed for universal, fracture-resistant performance across these materials. Which milling operations are supported? Typical uses include face milling, shoulder milling, slotting, high-feed and contour milling when the insert is combined with the appropriate Tungaloy milling body. How does the single-sided chipbreaker affect machining? The single-sided chipbreaker on the SCMT120408 AH725 improves chip control and evacuation, which helps maintain surface quality and reduces the likelihood of re-cutting chips. What must be checked when fitting the insert? Ensure the insert seat, geometry and milling body are technically compatible; correct clamping through the central hole and countersink is essential for repeatability and secure fixation. Can the AH725 grade be used in smaller cutters? Yes, AH725 is particularly useful for smaller tools and applications requiring high process security due to its fracture-resistant composition. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing performance, low cutting forces and stable clamping for consistent milling results; combine the sharp-edge behaviour and engineered seat geometry to reduce rework. Order the SCMT120408 NS9530 Tungaloy insert via Metav Werkzeuge or request selection advice from our specialists. SCMT120408 NS9530 Tungaloy indexable milling insert — cermet finishing grade for milling SCMT120408 NS9530 Tungaloy-Wendeplatte is a square indexable insert for milling, optimised for finishing steel with a sharp cutting edge and low cutting forces. Precise cermet finishing grade NS9530 Sharp cutting edge for fine surfaces Single-sided chipbreaker for continuous cuts Compatible with Tungaloy milling systems Exceptional finishing quality with cermet NS9530 The uncoated cermet NS9530 is developed as a finishing grade for steel, combining a very sharp cutting edge with reliable wear resistance. This composition reduces built-up edge and lowers cutting forces, which helps to achieve a high surface quality on machined faces and shoulders. For operations with small depth of cut and continuous cutting, the grade's edge stability leads to fewer rework cycles and predictable part tolerances, supporting efficient production runs. Reliable seating and repeatable clamping for uptime A secure interface between insert and tool body is essential for repeatable results; the geometry of this square insert matches Tungaloy milling systems and requires matching seat and clamp components. The square shape with a 0.8 mm corner radius and a 4.76 mm thickness ensures stable clamping and defined cutting positions. The insert's design — including a cylindrical hole with single-side countersink (40°–60°) — promotes correct orientation and reduces the risk of misassembly, contributing to shorter tool-change times and improved process reliability. Productivity advantages and application scope Designed for common milling tasks such as face, shoulder, slot, high-feed and contour milling depending on the tool family, this insert specialises in finishing workflows where surface quality and dimensional accuracy matter. The single-sided chipbreaker supports continuous cutting by controlling chip flow, while the sharp cermet edge minimises burr formation. When integrated into a matched milling body, the result is reduced cycle times and consistent part quality, making the component suitable for medium- to high-volume finishing where reproducibility is required. For tailored advice on selecting the right Tungaloy finishing inserts for milling operations, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to ensure the insert, seat and tool body are matched optimally Technical data Article number: 6998495 Manufacturer article number: 6998495 Manufacturer SKU: TUN6998495 SKU: 6998495-Tungaloy Model series: Milling indexable inserts Core specifications ISO designation: 120408 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Insert shape: square Hole: with cylindrical hole + single-side countersink (40°–60°) Included angle: 90° Features and materials Grade: NS9530 (uncoated cermet) Cutting material: cemented carbide Chipbreaker: single-sided Typical application: finishing of steel Typical operations: face, shoulder, slot, high-feed and contour milling Designed for Tungaloy milling systems FAQ What materials is this insert suitable for? The SCMT120408 NS9530 is specified as a finishing grade for steel; the uncoated NS9530 cermet is tailored to produce fine surfaces and low cutting forces in steel finishing applications. Is this insert compatible with standard Tungaloy milling holders? Compatibility requires matching the insert seat, geometry and clamping; the SCMT120408 is produced for Tungaloy milling systems and must be used with the corresponding tool body and clamp arrangement. Does the insert come with a chipbreaker, and what is its function? Yes — the insert features a single-sided chipbreaker, which controls chip formation during continuous cuts to support stable machining and reduce risk of recutting. How does the uncoated cermet grade affect tool life and surface finish? The uncoated cermet NS9530 offers a very sharp cutting edge for superior surface finish; it balances edge stability and wear resistance for finishing operations, helping to limit rework and maintain dimensional accuracy. What are the key geometric values to check when replacing inserts? Check the ISO designation 120408, the 12 mm size, 4.76 mm thickness and 0.8 mm corner radius, plus the hole and countersink style to ensure correct seating and orientation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing and low cutting forces thanks to the uncoated NS9530 cermet grade and the 0.8 mm corner radius; order genuine Tungaloy inserts directly via Metav Werkzeuge or contact our consultants for compatibility checks. SCMT120408 NS9530 Milling Insert — Milling, Tungaloy, 90° A SCMT120408 NS9530 indexable milling insert for Tungaloy milling systems, optimised for finishing steel in continuous cuts and small depths. Cermet grade NS9530 for finishing steel Sharp cutting edge for low cutting forces Square 12 mm insert, 90° geometry Single-sided chipbreaker with central hole Consistent finishing and why the grade matters The uncoated NS9530 is a cermet finishing grade designed for steel applications where surface integrity matters. Its composition produces a sharp cutting edge that reduces ploughing and lowers cutting forces, which in turn improves dimensional control and part finish during continuous machining and small depth cuts. For operations that prioritise a high-quality surface over heavy stock removal, this insert delivers measurable gains in first-pass quality and shorter downstream processing. Stable geometry for secure clamping and chip control The insert’s square 12 mm form, 4.76 mm thickness and 0.8 mm corner radius provide a balance between rigidity and fine edge geometry. The 7° relief and 90° main angle ensure predictable engagement and repeatable seating in compatible tool bodies, while the cylindrical central hole with a single-sided 40°–60° countersink secures positive clamping and quick indexing. The single-sided chipbreaker supports effective chip formation in continuous cuts, helping to maintain surface quality and reduce the risk of edge damage. Operational advantages on the shop floor Using this grade and geometry reduces cutting forces and can extend cutter life by lowering mechanical and thermal loads, leading to reduced tool wear and higher part throughput. Integration into a matched Tungaloy milling system ensures the insert’s benefits are realised; seating, insert geometry and cutter body must be technically compatible for optimal performance. Typical uses include facing, shoulder milling, slotting, high-feed and contour operations where fine finishes and repeatability are required. For application advice or to order genuine Tungaloy SCMT120408 NS9530 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 and our consultants will confirm system compatibility Technical data Article number: 6998501-Tungaloy Manufacturer article number: 6998501 Manufacturer SKU: TUN6998501 Model series: Fräswendeschneidplatten Brand: Tungaloy Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Main angle: 90° Special features Material: Hartmetall (cemented carbide) Grade: NS9530 (uncoated cermet finishing grade) Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Insert shape: square Application: Milling (facing, shoulder, slotting, high-feed, contour milling) System note: Insert seat, geometry and milling body must match for correct use FAQ What materials is this insert suited for? The SCMT120408 NS9530 insert is an uncoated cermet finishing grade primarily intended for steel machining, optimising surface finish and cutting stability in continuous cuts. Does the insert fit all Tungaloy milling bodies? Compatibility requires matching the insert seat and geometry; the SCMT120408 format fits tool bodies designed for SCMT120408 inserts within the Tungaloy system family. What are the key dimensions to check before use? Check the 12 mm square size, 4.76 mm thickness and 0.8 mm corner radius, together with the 7° relief and 90° main angle to ensure correct seating and engagement. How does the chipbreaker and hole design affect performance? The single-sided chipbreaker aids chip formation in continuous cuts, while the central cylindrical hole with a 40°–60° countersink provides secure clamping and simple indexing during tool changes. Can this insert be used for high-feed operations? Yes — depending on the assigned tool family, the insert supports high-feed and contour milling where the cutter body and insert geometry are matched. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 NS9530 Wendeplatten - Tungaloy
Combining the NS9530 cermet finishing grade, a sharp cutting edge and a 0.8 mm corner radius, this insert delivers low cutting forces and outstanding surface quality for specialised steel finishing. Order matching cutter bodies and inserts directly via Metav Werkzeuge or consult their tooling specialists for system configuration. SCMT 120408 NS9530 indexable milling insert — cermet finishing grade, 0.8 mm corner radius (Tungaloy) A SCMT 120408 NS9530 indexable insert engineered for finishing operations in milling, designed to fit Tungaloy milling systems where insert seat, geometry and cutter body are matched. Cermet finishing grade NS9530 Sharp cutting edge for fine surfaces Square 90° geometry for shoulder milling Single-sided chipbreaker, with hole Consistent finishing performance with reduced cutting forces The uncoated cermet grade NS9530 is formulated for finishing steel, combining a sharp cutting edge with reduced cutting forces to produce superior surface quality. In continuous-cut scenarios and small depths of cut, the material’s edge stability and low cutting resistance help to lower vibration and improve the reproducibility of the machining result. This performance benefit translates into fewer rework cycles and a reliable surface finish when precision is required. Secure clamping for stable machining and repeatability Designed as part of a matched milling system, the insert’s square 90° geometry and cylindrical hole with single-side countersink (40°–60°) ensure correct seat location and clamp engagement. Correct mating between insert seat, geometry and cutter body is essential: it provides a repeatable reference, minimises micro‑movement under load and supports longer consistent life of the cutting edge. The result is predictable behaviour in batch production and improved process stability. Practical application range and productivity benefits This grade is intended primarily for finishing tasks such as face, shoulder and slot milling, as well as contour work when used in the appropriate cutter family. The combination of low cutting forces and a 0.8 mm corner radius supports delicate edge transitions and fine surface finishes while maintaining adequate robustness for medium-duty runs. For operations where dimensional accuracy and surface integrity influence downstream processes, the insert helps to increase first-pass yield. System considerations and economical use Supplied as part of the Tungaloy insert system, the component integrates with clamping screws, shims and cutter bodies to form a complete tooling solution. Because an insert’s performance depends on the whole assembly, selecting the correct cutter body and clamp torque is crucial for maximising tool life and achieving consistent part quality. Where tool families offer different geometries, choosing the matching combination reduces the risk of accelerated wear and supports repeatable production outcomes. For precision finishing with Tungaloy’s NS9530 cermet grade, contact Metav Werkzeuge for tailored tooling recommendations and system matching — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the right configuration for your milling application. Technical data Article number: 6998492 SKU: 6998492-Tungaloy Manufacturer SKU: TUN6998492 Designation: SCMT120408 NS9530 Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Insert angle: 90° Hole style: cylindrical hole + one-side countersink (40°–60°) Special features Cutting material: uncoated cermet (NS9530) Substrate: Hartmetall (carbide) Shape: square insert Chipbreaker: single-sided Typical use: milling — face, shoulder, slot and contour milling depending on tool family System components: cutter body, indexable insert, clamping screw, possible shim — insert seat and geometry must match cutter body FAQ What applications is this insert best suited for? The SCMT 120408 NS9530 indexable insert is optimised for finishing steel in face, shoulder and slot milling where a fine surface finish and low cutting forces are required. Is the insert coated? No, the NS9530 is supplied as an uncoated cermet; this enhances edge sharpness for finishing on steel while offering consistent surface quality. How does the 0.8 mm corner radius affect results? A 0.8 mm corner radius balances edge strength with the ability to produce fine surface transitions; the radius helps avoid premature chipping while maintaining good finish quality. Can this insert be used in non‑Tungaloy cutter bodies? The insert will perform only when the insert seat, geometry and cutter body are technically compatible; the SCMT 120408 must be used in suitably designed milling systems that match its dimensions and clamping style. Which SKU identifies this item for ordering? Order reference: SKU 6998492-Tungaloy (Manufacturer SKU: TUN6998492) for the SCMT 120408 NS9530 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 T505 Wendeplatten - Tungaloy
Take advantage of a CVD-coated cemented carbide grade focused on efficient cast-iron machining and precise chip control; the square SCMT120408 T505 insert combines a robust seating geometry with a 0.8 mm corner radius for stable cutting performance. Order matching milling bodies and inserts via Metav Werkzeuge or contact our consultants for tool pairing and availability. SCMT120408 T505 — Indexable milling insert for Fräsen (milling) by Tungaloy SCMT120408 T505 is a square indexable insert designed for milling operations, optimised for economical machining of cast iron within Tungaloy milling systems CVD-coated cemented carbide grade T505 Optimised for cast-iron milling Square 12 mm insert with 0.8 mm radius Cylindrical hole with 40°–60° countersink Increased process reliability through controlled chip formation The CVD-coated T505 grade delivers consistent wear behaviour and thermal resistance that supports stable cutting in interrupted and continuous milling. With an integrated one-sided chipbreaker, the insert promotes reliable chip control during planing, shoulder and slot operations, which reduces the risk of recut and minimises machine downtime. This translates into fewer tool changes and more predictable cycle times on production-critical components. Secure clamping and geometry for repeatable accuracy The SCMT120408 T505 insert features a square 12 mm format, a 4.76 mm plate thickness and a cylindrical hole with a single-side countersink (40°–60°) that ensures positive seating in compatible milling bodies. The 90° orientation and the 7° relief angle combine with the 0.8 mm corner radius to provide a secure interface and predictable contact stresses, helping to maintain dimensional consistency across repeated tool indexings and extending usable insert life. Economical machining tailored to cast-iron applications Designed specifically for the economic machining of cast iron, this insert balances cutting-edge wear resistance with cost-effective performance. The carbide substrate and CVD coating are selected to withstand typical cutting conditions for grey and compacted graphite iron, supporting efficient metal removal rates while preserving edge life. The result is an attractive cost per component for repetitive milling tasks where process stability matters. Coating and grade explained for practical selection A CVD coating applied to a cemented carbide substrate provides a hard, wear-resistant surface layer that excels at resisting abrasive wear and thermal shock during medium to high cutting speeds. The T505 grade is optimised for the conditions encountered in cast-iron milling, offering a compromise between toughness and hardness suitable for interrupted cuts. The system requirement — matching insert seat, geometry and cutter body — ensures the insert performs as intended when installed in the correct Tungaloy tool family. For tool matching, availability and application advice on Tungaloy T505 inserts contact Metav Werkzeuge for tailored guidance and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6831847 SKU: 6831847-Tungaloy Manufacturer SKU: TUN6831847 Model series: Indexable milling inserts Material: Cemented carbide Facts Corner radius: 0.8 mm Insert size: 12 mm Plate thickness: 4.76 mm Relief angle: 7° Primary angle: 90° Special features CVD-coated cemented carbide grade T505 Single-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) Square insert format, with hole Optimised for cast-iron milling Designed for Tungaloy milling systems; seat and geometry must match FAQ What materials is this insert intended for? The insert is intended primarily for the economical machining of cast iron; the T505 grade and CVD coating are optimised for this application. Which milling operations are suitable for this insert? Typical uses include face milling, shoulder milling, slotting, high-feed and contour milling depending on the assigned milling body and tool family. How does the hole and countersink affect clamping? The cylindrical hole with a single-side countersink (40°–60°) provides a stable seating and improved axial location in compatible cutter bodies, enhancing repeatability during indexing. What benefit does the one-sided chipbreaker provide? The integrated chipbreaker improves chip control during interrupted cuts and helps reduce recutting, which contributes to more consistent surface quality and fewer unplanned tool changes. Is the insert compatible with all Tungaloy milling systems? Compatibility requires a matching seat and cutter geometry; the insert is intended for use in Tungaloy milling systems where the seat, geometry and cutter body are technically matched. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 T5115 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T5115 grade and the 0.8 mm corner radius to achieve stable chip control and reliable edge strength in milling operations; these features, combined with secure clamping via the central hole and countersink, support consistent production results. Order directly via Metav Werkzeuge or consult the technical team for process-matched recommendations. SCMT120408 T5115 indexable insert for milling (square, 90°) — Tungaloy The SCMT120408 T5115 is a square indexable insert designed for versatile milling applications, optimised for cast-iron machining and engineered to fit compatible Tungaloy milling systems. CVD-coated carbide grade T5115 Designed for cast iron machining 0.8 mm corner radius for durability Square shape with 90° cutting angle Consistent cutting performance for cast-iron work The CVD-coated carbide matrix of this insert provides a balanced mix of wear resistance and cutting-edge stability, making it especially effective for interrupted or continuous engagement with cast iron. The T5115 grade is formulated for broad material coverage, which reduces the need for frequent tool changes and supports steady cycle times in production. By choosing a universal grade with optimised chip control, process planners gain reproducible surface quality and predictable tool life, which contributes directly to operational efficiency and lower overall machining costs. Edge security and process reliability under load A 0.8 mm corner radius and a robust plate thickness of 4.76 mm increase edge strength and reduce the risk of premature chipping during shoulder and high-feed milling. The single-sided chipbreaker geometry helps to form short, controllable chips, improving evacuation when machining grooves or pockets and reducing recutting. Together, these design elements enhance process security and help maintain dimensional stability on successive parts, thereby reducing rework and downtime in medium- to high-volume production. System compatibility and secure clamping for repeatable results The insert’s square form and 90° cutting angle suit planing, shoulder and contour milling operations when used in properly matched Tungaloy milling bodies. The insert is supplied with a central hole and a cylindrical hole with one-sided countersink (40°–60°) to ensure positive clamping and consistent seat alignment. This mechanical fit minimises micro-movements during cutting, supporting repeatable positioning and surface finish across batches. Correct pairing of insert geometry and cutter body is essential for maximised tool life and machining performance. Practical choice for production environments With a nominal size of 12 mm and a grade optimised for cast-iron applications, this insert represents a pragmatic option for shops seeking a reliable, general-purpose solution. The combination of CVD coating, carbide substrate and engineered chip control enables balanced wear behaviour and good edge retention. If process-specific optimisation is required—such as selection of cutter bodies, speeds or feeds—Metav Werkzeuge can provide tailored advice and machining data to integrate the insert efficiently into existing toolsets. Contact Metav Werkzeuge for tailored recommendations on integrating Tungaloy milling inserts into production processes: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6864746 Manufacturer SKU: TUN6864746 SKU: 6864746-Tungaloy Designation: SCMT120408 T5115 Tungaloy indexable insert Series: Milling indexable inserts Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Cutting angle: 90° Hole: with hole Countersink: 40°–60° Special features Material: carbide Coating: CVD Grade: T5115 Suitable for: cast iron Chipbreaker: single-sided Shape: square Hole style: cylindrical hole with single-side countersink Application: milling FAQ What materials is this insert suited for? The SCMT120408 T5115 insert is formulated for cast iron machining; the CVD-coated carbide grade offers balanced wear resistance and edge stability for this material group. Which milling operations suit this insert best? This square, 90° insert is suitable for planing, shoulder, groove and contour milling when used with matching Tungaloy milling bodies. How does the chipbreaker affect performance? The single-sided chipbreaker promotes short, controlled chips, aiding evacuation and improving surface quality during interrupted or pocket milling. Is special clamping required for secure seating? The insert features a central cylindrical hole with one-sided countersink; correct mating with the designated cutter body ensures secure clamping and repeatable seating. Can Metav Werkzeuge provide cutting data for this insert? Yes; Metav Werkzeuge can supply process recommendations and cutting parameters for the SCMT120408 T5115 insert to suit specific machine and workpiece conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 T515 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T515, a robust 0.8 mm corner radius and a standard 90° geometry to achieve reliable, economical milling of cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for application support. SCMT120408 T515 square indexable insert for milling — Tungaloy The SCMT120408 T515 is a square indexable insert engineered for milling applications, optimised for economical and stable machining of cast iron with Tungaloy’s CVD-coated carbide grade. CVD-coated carbide grade T515 Square insert SCMT 12×12 with 0.8 mm radius 90° cutting edge for general milling Cylindrical hole with single-side countersink Secure, economical cast-iron machining with CVD-coated carbide The CVD-coated carbide grade T515 provides a balance of wear resistance and cost-effectiveness for the machining of cast iron, promoting stable chip formation and extended tool life. Chemical vapour deposition (CVD) produces a thin, hard coating that protects the substrate during elevated temperatures and interrupted cuts; this reduces flank wear and helps maintain surface quality over longer production runs. As a result, shops benefit from fewer index changes and more predictable cycle times, contributing to lower overall machining costs. Predictable edge behaviour from square geometry and 0.8 mm radius A square form with a 0.8 mm corner radius and a 90° included angle delivers predictable contact conditions at the cutting edge, making the insert suitable for face, shoulder and contour milling where both robustness and edge strength matter. The modest radius increases corner strength versus a sharp corner while still supporting acceptable surface finish, so operators can select cutting parameters that favour productivity without compromising part tolerances. The standard geometry simplifies toolholder selection and process planning in multi-tool setups. Stable mounting and compatibility for secure production The insert’s cylindrical hole with a single-side countersink (40°–60°) and a thickness of 4.76 mm ensure secure clamping in suitably matched cutter bodies; correct match of the insert seat, geometry and cutter body is essential for repeatable results. The central hole and countersink arrangement supports axial and radial clamping loads, reducing micro-movement under cutting forces and increasing process stability. Clear system compatibility avoids misfits: the insert must be used in Tungaloy milling systems that accept SCMT-style indexable inserts. Process-focused chip control and flexible application range An one-sided chipbreaker design directs chips reliably for the intended milling modes and supports operations such as face, shoulder, slot, high-feed and contour milling depending on the assigned cutter family. The insert’s combination of grade and chip control is selected for interrupted and continuous cuts in cast iron, helping to avoid built-up edge and ensuring consistent surface quality. For manufacturers seeking reproducible productivity with economical tooling, this indexable insert integrates into standard milling tool systems and tooling strategies. Contact Metav Werkzeuge today to discuss how the Tungaloy SCMT120408 T515 insert can improve cast-iron milling productivity and to request availability or application advice; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6741315 Manufacturer SKU: TUN6741315 Name: SCMT120408 T515 Tungaloy-indexable insert Model series: Fräswendeschneidplatten Facts Insert size: 12 mm Insert thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 90° Special features Material: carbide Coating/grade: T515 (CVD) Insert form: square (SCMT) Hole: cylindrical with one-sided countersink 40°–60° Chipbreaker: one-sided Application: milling (face, shoulder, slot, high-feed, contour) FAQ What materials is this insert designed for? The SCMT120408 T515 insert is formulated for machining cast iron; the T515 CVD-coated carbide grade delivers stable chip formation and good wear resistance for this material class. Can this insert be used in interrupted cuts? Yes, the T515 grade and the insert’s geometry are suitable for interrupted and continuous milling in cast iron, providing reliable edge strength and reduced sensitivity to breakage. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius increases corner strength and tends to produce a slightly more robust cutting edge than a sharp corner, maintaining acceptable surface finish while extending edge life. Is the insert compatible with all milling bodies? The insert requires a matching cutter body and seat designed for SCMT inserts; the cylindrical hole with countersink and the specified geometry must be technically compatible with the milling system used. How does the one-sided chipbreaker affect chip control? The one-sided chipbreaker is designed to direct chips for typical milling operations indicated and helps maintain consistent chip flow, which supports surface quality and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 T6215 Wendeplatten - Tungaloy
Take advantage of high wear resistance and consistent chip control combined with a compact 90° square geometry for reproducible milling cycles; the CVD-coated carbide grade provides dependable tool life for machining stainless steels. Order the insert via Metav Werkzeuge or consult our specialists for application advice. SCMT120408 T6215 — Square milling insert for Fräsen (milling) SCMT120408 T6215 Tungaloy-Wendeplatte is a square indexable insert designed for a range of milling operations, offering robust chip control and wear-resistant performance for stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Square insert with 90° cutting angle Corner radius 0.8 mm for edge strength Central hole with countersink for secure clamping Consistent, wear-resistant performance for steel and stainless steels The CVD-coated carbide composition in this insert is formulated to withstand abrasive wear encountered when machining a wide range of steels, especially stainless steel grades. The coating reduces flank wear and maintains cutting-edge integrity over longer cycles, which lowers the frequency of insert changes and contributes to predictable process times. As a result, production runs become more efficient and tool-related downtime is reduced. Geometry and clamping that ensure repeatable accuracy The square insert geometry with a 90° cutting angle and a corner radius of 0.8 mm provides a balance between edge strength and chip formation control. The insert is supplied with a central hole and a cylindrical hole plus one-sided countersink (40°–60°), ensuring secure mechanical fixation in compatible milling bodies. Note that insert seat, geometry and milling body must match technically to guarantee correct seating and repeatable clamping—this is essential for maintaining dimensional accuracy during face, shoulder and contour milling. Optimised chip control and process reliability Equipped with a one-sided chipbreaker, the insert channels chips reliably away from the cutting zone, improving surface finish and reducing the risk of built-up edge. The chip management combined with the T6215 grade supports stable to slightly interrupted cuts and helps maintain a consistent surface quality across workpieces. The result is fewer scrapped parts and a smoother workflow on CNC milling centres. Flexible application across common milling tasks The insert is suitable for a variety of milling tasks including face milling, shoulder milling, slotting, high-feed and contour milling, depending on the selected tool family and cutter body. With a plate thickness of 4.76 mm and an insert size designation of 12, the insert integrates into Tungaloy milling systems that accept SCMT-style plates, enabling fast changeovers and modular tool setups. Where higher stability is required, choose appropriate cutter bodies and clamping hardware to match the insert’s design. Choose Tungaloy inserts for productive machining and contact Metav Werkzeuge for tailored advice or to confirm compatibility with existing tool bodies and machining parameters Technical Data Article number: 6903103 SKU: 6903103-Tungaloy Model series: Fräswendeschneidplatten Designation: SCMT120408 T6215 Facts Size: 12 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Cutting angle: 90° ISO code: 120408 Special features Material: CVD-coated carbide (T6215) Shape: square insert Hole: cylindrical with one-sided countersink (40°–60°) Chipbreaker: one-sided Application: milling — face, shoulder, slot, high-feed, contour FAQ What materials is this insert best suited for? The SCMT120408 T6215 insert (Tungaloy indexable insert, SKU 6903103-Tungaloy) is optimised for steels and stainless steel machining under stable to lightly interrupted conditions. Is the insert compatible with all SCMT tool bodies? Compatibility requires matching the insert seat, geometry and cutter body; the SCMT120408 form fits Tungaloy milling systems that accept SCMT-style plates when the clamping and seat geometry correspond. Can this insert be used for interrupted cuts? The T6215 grade supports stable to lightly interrupted cutting; for heavy interruptions, select a geometry and machine setup designed for higher shock resistance. How does the chipbreaker affect surface finish? The one-sided chipbreaker promotes controlled chip formation and evacuation, which helps achieve a consistent surface finish and reduces the risk of built-up edge during milling. What is the purpose of the countersunk hole? The cylindrical hole with a one-sided countersink (40°–60°) provides reliable mechanical fixation with the correct clamping screw and seat, improving repeatability and positional stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 T6215 Wendeplatten - Tungaloy
High wear resistance from the T6215 CVD coating plus a robust R0.8 corner radius provide longer tool life and consistent edge stability in milling stainless steels; the square 12 × 12 mm form with a cylindrical hole and countersink ensures secure clamping and accurate seating. Order the SCMT120408 T6215 directly via Metav Werkzeuge or consult our specialists for matching cutter bodies and application guidance. SCMT120408 T6215 – Indexable milling insert (square, R0.8) by Tungaloy for milling SCMT120408 T6215 is an indexable insert for milling, designed for productive machining of stainless steels in stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Square insert 12 × 12 mm, R0.8 One-sided chipbreaker for controlled chips Cylindrical hole with countersink Productive machining with CVD-coated carbide for stainless steels The CVD coating on the T6215 grade delivers high wear resistance and stable edge life when machining stainless steels, translating into fewer tool changes and lower production costs per component. The use of carbide substrate with a protective layer reduces flank wear and helps maintain dimensional accuracy during longer engagements. For process planners, this means more predictable tool life and repeatable surface quality in batch production. Secure seating and geometry that supports consistent results Designed as a square insert with a cylindrical hole and one-sided countersink, the component ensures firm clamping in compatible cutter bodies. The 90° insert angle and R0.8 corner radius increase corner strength for interrupted or shoulder milling, while the 4.76 mm plate thickness aids rigidity under load. Correct seat matching between insert and cutter body is essential; when mounted in the appropriate Tungaloy milling system, the geometry supports accurate repeatability and reduced vibration. Controlled chip formation and application flexibility The one-sided chipbreaker promotes predictable chip flow and evacuation in common milling tasks such as face, shoulder, slot and contour operations. The 12 mm square format and medium corner radius make the insert suitable for a balance of robustness and edge definition, helping achieve consistent surface finish and tool performance. Used in stable to slightly interrupted cuts, the insert supports both roughing passes with effective chip control and finishing cuts where surface quality matters. Selection guidance and practical handling notes When choosing this indexable insert, confirm compatibility of insert seat, clamping screw and cutter family to ensure ideal performance; mismatched interfaces can compromise stability. The SCMT120408 T6215 benefits from matching cutter bodies specified for its seat geometry and through-hole style (cylindrical hole plus single-side countersink). For technical data such as recommended feeds, speeds and coolant strategy, contact our application engineers—this helps to align productivity and tool life with specific workpiece alloys and machine conditions. For tailored advice on integrating the SCMT120408 T6215 into existing milling setups, and to order matching cutter bodies, contact Metav Werkzeuge for precise application support and recommendations. Technical data Article number: 6903105 Manufacturer SKU: TUN6903105 Internal SKU: 6903105-Tungaloy Facts Shape: square Size: 12 mm Corner radius: 0.8 mm Thickness: 4.76 mm Insert angle: 90° Clearance angle: 7° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Material: carbide Coating: CVD Grade: T6215 Chipbreaker: one-sided Typical application: milling Suited materials: stainless steels System: for Tungaloy milling systems; insert seat and cutter body must match FAQ What materials is this insert best suited for? The SCMT120408 T6215 insert is optimised for stainless steels, offering wear resistance and stable cutting behaviour under the specified conditions. Is the insert compatible with all milling cutter bodies? Compatibility requires a matching insert seat and clamping design; the SCMT120408 must be used in cutter bodies designed for its seat, hole style and geometry. What advantage does the R0.8 corner radius provide? A 0.8 mm corner radius increases edge strength for interrupted cuts and shoulder milling while still allowing decent surface finish in finishing passes. How does the one-sided chipbreaker affect machining? The one-sided chipbreaker ensures controlled chip formation and evacuation, improving surface finish and reducing the risk of chip entanglement during milling. Which coating and grade are used on this insert? This insert features a CVD coating on a carbide substrate in the T6215 grade to enhance wear resistance when machining stainless steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Hersteller: Tungaloy; 6903105; info@metav-werkzeuge.com; +49 2822 7131930
SCMT 120408 T9215 Wendeplatten - Tungaloy
Taking advantage of the CVD-coated T9215 grade and the 0.8 mm corner radius ensures stable chip formation, extended tool life and consistent productivity in medium-steel milling operations; order the SCMT120408 T9215 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT 120408 T9215 indexable milling insert by Tungaloy — 0.8 mm radius, CVD-coated carbide SCMT120408 T9215 is an indexable milling insert designed for Tungaloy milling systems, intended for face, shoulder, slot and contour milling where matched insert seat and body geometry are required SCMT120408 form, 12 mm square CVD-coated carbide T9215 0.8 mm corner radius Cylindrical hole with 40°–60° countersink High productivity and predictable tool life for medium steels The combination of the T9215 grade and its CVD-coated carbide substrate delivers a balance of wear resistance and fracture toughness that benefits medium-steel machining. This makes the insert particularly suited for continuous and light interrupted cuts where consistent performance and long tool life reduce downtime and tool-change frequency. Explaining the technical term, a CVD coating creates a hard, wear-resistant layer on the cemented carbide body, improving edge stability and heat resistance; the practical result is improved surface finish and fewer rejects in series production. Secure mounting and repeatable accuracy from geometry and hole design The square form with a 90° cutting angle and a 0.8 mm corner radius gives geometrical robustness for shoulder and face milling, while the cylindrical hole with single-sided countersink (40°–60°) ensures positive clamping and centration in compatible tool bodies. For modular milling systems the correct insert seat and geometry must match the cutter body; when matched, the indexable insert provides repeatable positioning and consistent cutting geometry across index changes. This reduces set-up time and maintains dimensional stability on finished components. Improved chip control and application range for efficient operation Equipped with a one-sided chipbreaker, the insert supports controlled chip evacuation during common milling operations—face, shoulder, slot, high-feed and contour milling depending on the tool family. Good chip control limits recutting and helps protect the cutting edge, contributing to surface quality and process reliability. The insert’s specification marks it as a first choice for medium steel applications where a balance of productivity and edge security is required; for tailored cutting parameters and feed recommendations, consultation with application specialists is advised. For tailored application advice or availability of the SCMT120408 T9215 indexable insert from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to request technical support and stock information. Technical data Article number: 6772462 SKU: 6772462-Tungaloy Manufacturer SKU: TUN6772462 Model series: Fräswendeschneidplatten Designation: SCMT120408 T9215 Tungaloy indexable insert Dimensions & angles Inscribed size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Cutting edge angle: 90° Materials & features Material: cemented carbide Coating / grade: T9215 (CVD-coated carbide) Hole style: with cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Shape: square FAQ What applications is this insert suited for? The SCMT120408 T9215 indexable insert is intended for milling operations such as face, shoulder, slot, high-feed and contour milling, depending on the associated tool family. Which materials can be machined with this grade? The T9215 grade is optimised for medium-steel machining, offering a balance of wear resistance and toughness suited to continuous and light interrupted cuts. How does the chipbreaker influence performance? The one-sided chipbreaker on the insert improves chip control, reduces recutting, and contributes to stable cutting conditions and better surface quality. Is the insert compatible with other manufacturers’ cutter bodies? Compatibility requires the correct seat, geometry and clamping method; the insert’s dimensions and hole style must match the cutter body to ensure secure clamping and repeatable performance. How does the countersunk hole affect clamping? The cylindrical hole with a single-sided countersink (40°–60°) enhances axial location and allows positive clamping torque, increasing repeatability during index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215, compact geometry and secure clamping for consistent productivity and low tooling variance. The design supports stable chip control and good wear resistance under continuous to light interrupted cuts; order directly via Metav Werkzeuge or consult the technical team for application matching. SCMT120408 T9215 indexable insert for milling — Tungaloy A SCMT120408 T9215 indexable insert designed for Tungaloy milling systems, optimised for face, shoulder, slot, high-feed and contour milling in medium steel applications CVD-coated carbide grade T9215 Optimised for medium steel machining Square insert, 12 mm size, 0.8 mm corner radius Cylindrical hole with single-sided countersink High-performance grade for medium steel that raises process reliability The insert is manufactured from CVD-coated carbide and specified as grade T9215, which combines wear resistance with controlled fracture resistance. This balance permits higher productivity in continuous and lightly interrupted cuts, reducing the frequency of index changes and supporting predictable cycle times. For workshops seeking consistent tool life and surface quality, the material and coating selection translate directly into lower operating costs and more stable production performance. Geometry and clamping that ensure stable cutting and repeatability Square format and a corner radius 0.8 mm together with a 4.76 mm plate thickness deliver stiffness and positive engagement for radial and axial cuts. The 12 mm size and 7° relief angle are chosen for general-purpose milling where rigidity and edge strength matter; the cylindrical hole with one-sided countersink (40°–60°) enables secure clamping and repeatable positioning in compatible tool bodies. The integrated single-sided chipbreaker improves chip flow and reduces the risk of built-up edge, which in turn supports consistent surface finish and predictable regrinding intervals. Practical applications and benefits in everyday milling operations Configured for face, shoulder, slot, high-feed and contour milling, the insert is suited to a broad range of shop-floor tasks on medium steel. When matched to the correct Tungaloy cutter body—where seat geometry and clamp specification align—the system delivers reliable cutting behaviour and stable chip formation. The result is fewer unplanned stops, improved part quality and an easier process window to set up. For larger production runs, this contributes to reproducible results and optimised tool utilisation. Contact Metav Werkzeuge today to confirm compatibility with existing tool bodies or to request application advice — Metav Werkzeuge can advise on matching the insert to the correct milling body and provide order assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6774071 SKU: 6774071-Tungaloy Manufacturer SKU: TUN6774071 Model series: Fräswendeschneidplatten Material: Hartmetall Grade/coating: T9215 (CVD-coated) Facts Size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Cutting angle: 90° Hole: mit Loch Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Square plate form Single-sided chipbreaker Designed for Tungaloy milling systems — seat and geometry must match Typical applications: face, shoulder, slot, high-feed and contour milling Suitable for continuous to light interrupted cuts FAQ What materials is this insert best suited for? The SCMT120408 T9215 indexable insert from Tungaloy is optimised for medium steel machining and provides an effective balance of wear resistance and fracture toughness for typical shop-floor steels. Can the insert handle interrupted cuts? Yes, the T9215 grade is specified for continuous to light interrupted cuts; for heavier interruptions the clamping method and cutter body selection should be reviewed to ensure edge security. What are the key geometric specifications of the insert? This square insert measures 12 mm with a plate thickness of 4.76 mm, a corner radius of 0.8 mm and a 7° relief angle, offering a stiffer geometry for robust milling tasks. How is the insert secured in the milling body? Clamping is achieved via the cylindrical hole with a single-sided countersink (40°–60°); correct seat and clamp selection in the milling body are essential for repeatable positioning. Is the insert compatible with Tungaloy systems only? The insert is designed for Tungaloy milling systems where the seat, geometry and clamping match; when mounted in compatible bodies it delivers the intended performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade built for robust, universal performance and a secure 90° square geometry with a 0.8 mm corner radius, delivering stable cutting in medium-to-heavy steel milling. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT 120408 T9225 — Tungaloy indexable milling insert for milling, square 12 mm, 90° The SCMT120408 T9225 is a square indexable insert for milling, engineered for medium-to-heavy steel machining within Tungaloy milling systems. Robust CVD-coated carbide for steel machining Square 12 mm form with 90° cutting edge Single-sided chipbreaker for reliable chips Cylindrical hole with countersink for secure clamping Reliable performance for medium-to-heavy steel milling The CVD-coated T9225 grade provides a balanced combination of wear resistance and toughness, making it suitable for changing engagement conditions and slightly interrupted cuts. The square 12 mm form with a 90° included angle and a 0.8 mm corner radius delivers predictable strength at the cutting edge, which reduces the risk of edge chipping during shoulder and contour milling. By choosing a CVD-coated carbide grade, workshops benefit from improved tool life and consistent component quality under medium-to-heavy workloads. Secure fit and controlled chip evacuation for uninterrupted runs Reliable clamping and chip control reduce machine downtime. This insert features a single-sided chipbreaker that shapes chips for steady evacuation and lowers the chance of re-cutting. The cylindrical hole + one-sided countersink (40°–60°) ensures stable seating and repeatable clamping with the appropriate clamping screw and shim. Correct matching of insert seat, geometry and cutter body is essential for mechanical stability; where these elements align, the result is less vibration, improved surface finish and fewer unplanned tool changes. Designed for easy integration and predictable tool life As part of a modular milling system, the replaceable insert concept supports quick indexation and minimal inventory complexity. The insert’s 4.76 mm thickness and square format make it straightforward to fit into existing Tungaloy milling bodies designed for SCMT-style plates, while the 0.8 mm corner radius allows a compromise between edge strength and achievable corner detail. The universal nature of the T9225 grade means one insert can cover several operations — from face milling to high-feed and slotting tasks — contributing to lower tooling costs per component and smoother production planning. Contact Metav Werkzeuge for application advice or to request a quotation for Tungaloy milling inserts such as the SCMT120408 T9225 — e: info@metav-werkzeuge.com | t: +49 2822 7131930 Technical data Article number: 6781170 Manufacturer SKU: TUN6781170 Model series: Fräswendeschneidplatten Material: Carbide Label: SCMT120408 T9225 Tungaloy indexable insert Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 90° Special features CVD-coated carbide grade T9225 Square plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Intended application: milling Compatible with Tungaloy milling systems where seat and geometry match FAQ Is this insert suitable for steel machining? Yes. The SCMT120408 T9225 insert is a robust CVD-coated carbide grade designed specifically for medium-to-heavy steel machining and variable engagement conditions. Can the insert be used in different milling operations? The insert supports face, shoulder, slot, high-feed and contour milling depending on the assigned cutter family and the correct matching of seat and geometry. How does the T9225 grade differ from more wear‑focused coatings? T9225 is a universal, CVD-coated grade that prioritises toughness and reliable chip formation under interrupted cuts, offering a good balance between wear resistance and edge strength for mixed operating conditions. What is required for secure mounting of this insert? Secure mounting depends on a correct match between the insert seat, cutter geometry and the clamping screw; the cylindrical hole with one-sided countersink (40°–60°) provides reproducible positioning and stable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 T9225 Wendeplatten - Tungaloy
SCMT120408 120408 T9225 Tungaloy-Wendeplatte zum Fräsen Die SCMT120408 T9225 Tungaloy-Wendeplatte ist eine robuste Wendeschneidplatte für das Fräsen von Stahl und ermöglicht vielseitigen Einsatz bei Plan-, Schulter-, Nut- und Konturfräsen Quadratische Platte 12 x 12 mm CVD-beschichtetes Hartmetall T9225 Eckenradius 0,8 mm für stabile Schneidkante Freiwinkel 7° reduziert Reibung Mit Loch und einseitiger Senkung 40°–60° Produktive Zerspanung bei wechselnden Schnittbedingungen Die T9225-Sorte ist ein CVD-beschichtetes Hartmetall, das speziell für die mittlere bis schwere Stahlbearbeitung entwickelt wurde. Durch die Kombination aus Zähigkeit und Beschichtungsverschleißschutz bietet die Platte konstante Standzeiten auch bei leicht unterbrochenem Schnitt. Das Ergebnis ist eine höhere Produktivität, weil Rüstintervalle verlängert und Nacharbeit reduziert werden. Anwender profitieren von planbaren Ergebnissen in der Serienfertigung und von geringerer Werkzeugkosten pro gefertigten Bauteil. Systemkompatibilität und sichere Klemmung für reproduzierbare Ergebnisse Der Plattensitz und die Geometrie müssen mit dem Fräskörper übereinstimmen, damit die SCMT120408 ihre volle Leistung entfalten kann. Die präzise Kombination aus Plattendicke 4,76 mm, quadratischer Form und zylindrischem Loch mit einseitiger Senkung sorgt für formschlüssige Klemmung und vibrationsarmen Sitz. Das führt zu besserer Oberflächenqualität am Werkstück und zu gleichmäßiger Belastung der Schneidkante, was die Standzeit weiter stabilisiert. Geometrieparameter, die den Bearbeitungsnutzen erhöhen Der Eckenradius von 0,8 mm erhöht die Bruchfestigkeit an der Schneidkante und eignet sich somit für anspruchsvolle Kontur- und Schulterfräsoperationen. Der Freiwinkel von 7° reduziert den Reibkontakt und senkt die Wärmeentwicklung im Schnitt, sodass die Platte bei wechselnden Eingriffstiefen stabil bleibt. Der Winkel von 90° macht die Platte universell einsetzbar für rechtwinklige Bearbeitungen und sorgt für präzise Formtreue an Fasen und Schultern. Für wen diese Wendeschneidplatte entwickelt wurde Diese Wendeschneidplatte richtet sich an Produktionsbetriebe, Lohnfertiger und Werkzeugmaschinenbetreiber, die robuste, verlässliche Werkzeuge für die Stahlbearbeitung benötigen. Typische Einsatzfelder sind Planfräsen, Hochvorschubfräsen und Nutfertigung, besonders wenn wechselnde Schnittbedingungen oder leicht unterbrochene Schnitte auftreten. Die Platte ist ideal für Anwender, die Wert auf Wirtschaftlichkeit, Prozesssicherheit und konstante Bauteilqualität legen. Für die Anwendungsempfehlung und schnelle Lieferung empfiehlt Metav Werkzeuge die SCMT120408 T9225 Tungaloy-Wendeplatte; bei technischen Fragen erreichen Sie uns per eMail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 6781132 Marke: Tungaloy Serie: Fräswendeschneidplatten Bezeichnung: SCMT Fakten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 12 mm Freiwinkel: 7° Winkel: 90° Besonderheiten Material: Hartmetall Beschichtung: T9225 (CVD-Beschichtung: chemische Gasphasenabscheidung) Plattenform: Quadratisch Loch: mit Loch Lochstil: Zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: Einseitig System: Fräskörper, Wendeschneidplatte, Klemmschraube, Unterlage FAQ Für welche Werkstoffe eignet sich die Platte besonders gut? Die SCMT120408 T9225 Tungaloy-Wendeplatte ist für die mittlere bis schwere Stahlbearbeitung optimiert; die T9225-Sorte bietet dabei gute Zähigkeit und Verschleißschutz für wechselnde Schnittbedingungen. Ist die Platte für Hochvorschubfräsen geeignet? Ja, die Kombination aus Quadratform, Eckenradius 0,8 mm und den Geometrieparametern macht die SCMT120408 Tungaloy-Wendeplatte geeignet für Hochvorschub- und Konturfräsen unter stabilen Schnittbedingungen. Welche Vorteile bringt die CVD-Beschichtung? Die CVD-beschichtung der Sorte T9225 erhöht die Verschleißfestigkeit und die Temperaturbeständigkeit, wodurch die Standzeit der SCMT120408 Tungaloy-Wendeplatte in anspruchsvollen Stahlprozessen verbessert wird. Wie wichtig ist die Systemkompatibilität mit dem Fräskörper? Sehr wichtig. Plattensitz, Geometrie und Fräskörper müssen technisch übereinstimmen, damit die SCMT120408 Tungaloy-Wendeplatte vibrationsarm sitzt und reproduzierbare Bearbeitungsergebnisse liefert. Welche Rolle spielt der Freiwinkel von 7°? Der Freiwinkel von 7° reduziert den Reibkontakt zur Oberfläche und verringert die Wärmeentwicklung; das unterstützt konstante Schneidkantenperformance bei variierenden Eingriffstiefen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SCMT 120408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide, the robust T9225 grade and a precise 0.8 mm corner radius for stable performance in medium to heavy steel milling; order the inserts directly via Metav Werkzeuge or ask our consultants for selection support. SCMT120408 T9225 – Square milling indexable insert, CVD-coated carbide, Tungaloy The SCMT120408 T9225 is a square indexable insert designed for milling operations on medium to heavy steel, compatible with Tungaloy milling systems where insert seat and geometry match CVD-coated carbide grade T9225 For medium to heavy steel milling 0.8 mm corner radius, 90° included angle Square insert with cylindrical hole and countersink Consistent cutting under variable conditions for higher uptime The T9225 grade is a CVD-coated carbide developed as a robust universal grade for the mid-to-heavy range of steel machining. The chemical vapour deposition finish improves thermal resistance and wear behaviour, which results in longer edge life under fluctuating cutting forces and slightly interrupted cuts. For production environments where cycle time and tool-change frequency directly affect throughput, the coating and substrate combination supports predictable performance and reduced tool consumption Geometry engineered for stable chips and reliable clamping A square profile with a 90° included angle and a 0.8 mm corner radius provides a balance between edge strength and cutting versatility. The insert’s 4.76 mm thickness and 7° relief aid secure seating and repeatable orientation in the cutter body, while the cylindrical hole with a one-sided countersink (40°–60°) ensures concentric clamping with a locating screw. The single-sided chipbreaker controls chip formation for common milling tasks, translating into improved surface quality and fewer interruptions for chip management System compatibility reduces setup risk and simplifies procurement This indexable insert belongs to the Tungaloy model series for milling inserts and must be used with a cutter body whose insert seat, geometry and clamping method are technically compatible. Using matched components avoids misalignment and unstable clamping, which otherwise shorten tool life and compromise repeatability. Specifying the SCMT120408 T9225 together with an appropriate Tungaloy cutter body streamlines assembly and reduces the risk of incorrect fit during changeover Application focus: where the grade and form deliver greatest value Typical applications include face milling, shoulder milling, slotting, high-feed operations and contour milling depending on the assigned tool family. The combination of a square form, robust substrate and CVD coating is particularly effective when cuts vary between continuous and slightly interrupted engagement. In practice this means fewer insert changes, stable surface finish and improved process reliability in batch production or job-shop environments For technical selection, availability or to procure Tungaloy inserts directly, contact Metav Werkzeuge for tailored advice and fast delivery — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical data SKU: 6781110-Tungaloy Manufacturer SKU: TUN6781110 Manufacturer article number: 6781110 Model series: Milling indexable inserts Name: SCMT120408 T9225 Tungaloy insert Facts Corner radius: 0.8 mm Thickness: 4.76 mm Size: 12 mm Included angle: 90° Relief angle: 7° Special features Material: carbide Coating: CVD-coated Shape: square Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: milling, suited for medium to heavy steel System note: for Tungaloy milling systems; insert seat and geometry must match FAQ What materials is this insert suitable for? The SCMT120408 T9225 is intended primarily for medium to heavy steel machining; the CVD-coated carbide substrate provides the toughness and wear resistance required for such materials Can the insert be used in non-Tungaloy bodies? The insert will perform only when the insert seat, geometry and clamping system match; non-matching cutter bodies can cause misalignment or insecure clamping for the SCMT120408 T9225 What does the T9225 designation indicate? T9225 denotes a robust universal CVD-coated carbide grade designed for stable chip formation and reliable edge life in varying steel cutting conditions How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) facilitates concentric clamping with a locating screw, improving seating accuracy and repeatability for this indexable insert Which milling operations are typical for this insert? Typical applications include face, shoulder, slot, high-feed and contour milling depending on the cutter family selected; the insert supports operations where toughness under interrupted cuts is required Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9225, a robust universal grade for medium to heavy steel machining, and precise 90° geometry for a productive milling process. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult the team for technical matching and availability. SCMT120408 T9225 SCMT — Indexable milling insert for milling by Tungaloy The SCMT120408 T9225 is a square indexable cutting insert for Tungaloy milling systems, developed for medium to heavy steel machining where intermittent cuts and variable engagement demand increased toughness. CVD-coated carbide grade T9225 Robust universal grade for steel machining 0.8 mm corner radius for edge security Square form, 12 mm size, 90° geometry Central hole with 40°–60° countersink Enhanced productivity for medium to heavy steel milling The combination of a CVD-coated surface layer and a wear-resistant carbide substrate delivers an excellent balance between hardness and toughness. This results in longer tool life under changing cut conditions and lower overall tooling costs per component. The specified T9225 grade is optimised for stability in interrupted cuts, making it suitable for face, shoulder and heavy contour milling where consistent material removal rates are required. By selecting a grade tuned to mixed engagement conditions, machining cycles become more predictable and throughput improves without compromising surface quality. Reliable integration into Tungaloy milling systems Designed as part of a complete system, the insert requires matching cutter bodies, clamp screws and pads to ensure secure seating and repeatable positioning. The square form and 90° geometry allow straightforward indexation and multiple cutting edges per insert, increasing usable life per part. The central fastening hole with a 40°–60° countersink guarantees firm clamping and simple mounting on compatible tool holders. Where modularity and interchangeability matter, this geometry supports efficient tool changeovers and reduces setup time on the shop floor. Edge security and cutting performance under load A 0.8 mm corner radius provides a robust cutting edge that resists chipping during heavy engagement and interrupted cuts, while the single-sided chipbreaker manages swarf formation to maintain consistent chip flow. The insert’s 7° relief angle and 4.76 mm thickness contribute to stable cutting action and support under bending loads, reducing the risk of premature edge failure. For operations requiring a balance of surface finish and material removal, this configuration delivers durable performance with predictable wear patterns, simplifying tool life monitoring and process control. Typical applications and handling guidance The design suits a range of milling tasks: face milling, shoulder milling, slotting, high-feed operations and contour work, depending on the chosen cutter family. When selecting a tool body, ensure that seat geometry and clamp design match the insert specification to avoid misalignment. Spare inserts and clamping hardware should be kept compatible within the same system family to maintain process reliability. For additional technical data or assistance with tool selection, the Metav Werkzeuge team is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Contact Metav Werkzeuge today for assistance with tool matching, availability of genuine Tungaloy inserts and recommendations for process optimisation Technical data Article number: 6781183 SKU: 6781183-Tungaloy Manufacturer SKU: TUN6781183 Model series: milling indexable inserts Material: carbide Numbers / Core technical data Corner radius: 0.8 mm Geometry angle: 90° Relief angle: 7° Plate thickness: 4.76 mm Plate size: 12 mm Designs / Special features CVD-coated carbide grade T9225 Square plate shape Central hole with cylindrical hole + single-sided countersink (40°–60°) Single-sided chipbreaker Typical applications: face, shoulder, slot, high-feed and contour milling System components: cutter body, indexable insert, clamp screw, support pad FAQ What materials is this insert intended for? The SCMT120408 T9225 insert is intended primarily for medium to heavy steel machining and performs well under intermittent cutting conditions. How does the T9225 grade affect tool life? The T9225 CVD-coated grade increases resistance to abrasive wear while providing toughness for interrupted cuts; this combination typically extends usable tool life in variable engagement applications. Is this insert compatible with other manufacturers’ tool bodies? Compatibility requires identical seat geometry and clamping principles; the insert is designed for Tungaloy milling systems and requires matching cutter body geometry for safe, repeatable performance. What benefits does the 0.8 mm corner radius provide? A 0.8 mm corner radius offers enhanced edge strength and reduced chipping risk during heavy engagement, improving reliability in demanding milling operations. Are there specific mounting recommendations? Use the correct clamp screw and support pad specified for the matching tool family, and ensure the central countersunk hole aligns with the cutter body to achieve secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120412 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH6225 grade and a 1.2 mm corner radius for a stable cutting edge and consistent surface quality in medium turning operations. The ISO SCMT120412 form with a central hole and a 7° relief angle ensures broad compatibility with standard turning holders and quick indexability. Order via Metav Werkzeuge or consult their specialists for application advice. SCMT 120412 AH6225 — Turning insert (ISO) by Tungaloy, PVD-coated carbide, 1.2 mm radius A Tungaloy SCMT 120412 AH6225 insert engineered for ISO-standard external and internal turning, designed to balance sharpness and edge stability for stainless steels and mixed materials PVD-coated carbide AH6225 1.2 mm corner radius for balanced performance Square ISO form 12 mm, 4.76 mm thick Centre hole with single-sided countersink 40°–60° Stable edge and improved surface finish for demanding materials The insert’s AH6225 composition and PVD-coated surface combine to reduce adhesion and wear when machining stainless steels. The assigned chipbreaker PM promotes reliable chip control across changing cut conditions, which decreases the risk of built-up edge and improves repeatable part finish. This geometry is aimed at medium-depth turning where a sharp yet resilient cutting edge yields consistent dimensional accuracy and fewer secondary operations. ISO conformity and secure clamping for predictable setups Built to the ISO designation, the SCMT form and the central fixing system with a cylindrical hole and single-sided countersink (40°–60°) make the insert compatible with a wide range of external holders and boring bars. The 7° relief angle and square shape provide a stable seating and help to reduce micro-movements under load, shortening setup times and simplifying tool change procedures. This predictability supports higher machine utilisation and steadier process control. Geometry tuned for longevity and consistent results A 1.2 mm corner radius provides a pragmatic compromise between cutting-edge strength and surface quality: increased radius boosts resistance to edge chipping, while maintaining a fine finish on workpieces. The 4.76 mm plate thickness and the 90° included angle contribute to robust mechanical support in the clamping seat, which together with the PVD protection extends effective tool life. The combination of features promotes economical machining by lowering the frequency of index changes and reducing scrap. For process-critical turning with Tungaloy AH6225 inserts, contact Metav Werkzeuge for tailored technical guidance or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903309 Manufacturer SKU: TUN6903309 SKU: 6903309-Tungaloy ISO designation: SCMT120412-PM Model series: ISO turning inserts Material: carbide Facts Corner radius: 1.2 mm Insert size: 12 mm Plate thickness: 4.76 mm Relief angle: 7° Included angle: 90° Special features Grade/coating: AH6225, PVD-coated Chipbreaker: PM Shape: square Hole: cylindrical hole with single-sided countersink (40°–60°) Application: turning FAQ Which materials is this insert best suited for? The SCMT 120412 AH6225 insert is optimised for stainless steels and performs well on mixed materials where a sharp, stable edge is required. How does the PM chipbreaker affect machining? The PM chipbreaker on the SCMT120412-PM promotes controlled chip formation and evacuation, enhancing surface finish and reducing the chance of built-up edge during interrupted or variable cuts. What dimensions and geometry should be checked for holder compatibility? Confirm the ISO form (SCMT), insert size (12 mm), thickness (4.76 mm), relief angle (7°) and the central hole/countersink style to ensure the insert seats correctly in the chosen holder. Is this insert suitable for internal and external turning? Yes, the ISO-standard geometry and central fixing make the insert suitable for both external turning and appropriate internal boring applications when matched to a compatible holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120412 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH6235 toughness, PM chipbreaker geometry and ISO compatibility for reliable machining of stainless steels and interrupted cuts. Order the SCMT120412-PM AH6235 turning insert directly via Metav Werkzeuge or ask our consultants if needed. SCMT 120412 AH6235 Turning Insert (PM) — Tungaloy The SCMT120412-PM AH6235 Tungaloy turning insert is an ISO-standard square insert designed for external and internal turning, delivering controlled chip formation and improved resistance to notch wear in stainless steels and interrupted cuts. ISO-compatible SCMT 120412 geometry PVD-coated AH6235 for stainless steel PM chipbreaker for interrupted cuts 7° clearance angle, 1.2 mm corner radius Consistent chip control for interrupted and stainless steel turning The combination of the AH6235 cutting grade and a PVD coating provides enhanced toughness and adhesive-wear resistance, which is particularly beneficial when machining stainless steel or mixed-batch workpieces that produce built-up edge. The PM chipbreaker is designed to break chips reliably under varying cutting conditions, reducing manual interventions and protecting the workpiece surface. These material and geometry choices result in fewer unexpected tool changes and a steadier production flow. ISO conformity and secure clamping for stable processes Constructed to the ISO SCMT120412 form, the insert offers predictable mounting characteristics: square form, cylindrical hole with one-sided countersink (40°–60°) and standard dimensions ensure compatibility with many holders. The standardised geometry simplifies tool inventory and reduces set-up time, while the defined 7° clearance angle and 90° cutting angle support consistent cutting engagement. Clear mechanical fit and repeatable seating improve process stability and reproducibility across shifts. Robust edge design that extends cutting life and productivity The insert is made of cemented carbide and features a 1.2 mm corner radius with a plate thickness of 4.76 mm, giving the cutting edge extra strength where interruptions or variable feeds occur. This geometry helps distribute cutting forces and reduces the risk of premature chipping, allowing higher feed/roughing passes when appropriate. The result is improved throughput and fewer tool indexings, supporting a cost-effective machining strategy without sacrificing surface quality. For machining tasks requiring reliable performance in stainless steels and interrupted cuts, consider the Tungaloy SCMT120412-PM with AH6235 grade — contact Metav Werkzeuge for technical advice or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903478 SKU: 6903478-Tungaloy Manufacturer SKU: TUN6903478 Model designation: SCMT120412-PM Manufacturer: Tungaloy Facts Corner radius: 1.2 mm Thickness: 4.76 mm Size: 12 mm Clearance angle: 7° Cutting angle: 90° Special features Material: carbide Coating/grade: PVD-coated AH6235 Chipbreaker: PM Hole style: cylindrical hole with one-sided countersink (40°–60°) Shape: square Application: turning Suitable for interrupted cuts and stainless steel machining FAQ What materials are best machined with this insert? The SCMT120412-PM AH6235 insert is optimised for stainless steel and applications with high notch or breakout risk; its AH6235 grade and PVD coating enhance adhesion resistance and toughness. Is the insert compatible with ISO-standard holders? Yes, the insert follows the ISO SCMT120412 form, so compatibility depends on holder shape, seating tolerance and fastening; the square form and the cylindrical hole with countersink are standardised for many external and boring holders. How does the PM chipbreaker affect cutting performance? The PM chipbreaker promotes short, controlled chips in varying cutting conditions, improving chip evacuation and reducing the risk of entanglement during interrupted cutting or unstable feeds. Can this insert be used for internal turning as well as external turning? The design and geometry of the SCMT120412-PM make it suitable for both external and internal turning operations when paired with a compatible holder and appropriate cutting parameters. What are the mechanical strengths of the insert? With a 1.2 mm corner radius and 4.76 mm thickness, the insert provides a robust edge for heavy engagement and resistance to chipping under interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120412 AH725 Wendeplatten - Tungaloy
Combining the PVD-coated AH725 carbide and a 1.2 mm nose radius, this ISO indexable turning insert provides reliable process security and consistent tool life in mixed-material production; order the SCMT120412-PM AH725 Tungaloy insert directly via Metav Werkzeuge or consult the technical advisors if clarification is required. SCMT120412-PM AH725 Tungaloy turning insert — PVD-coated carbide, 1.2 mm nose radius SCMT120412-PM AH725 Tungaloy turning insert is an ISO-format indexable turning plate designed for general external and internal turning where process stability and material versatility are required. PVD-coated AH725 carbide grade 1.2 mm nose radius for robust edge Square ISO insert, 90° included angle Chipbreaker PM for general turning tasks Consistent wear resistance for mixed-material production The PVD-coated AH725 grade combines a wear-resistant surface layer with a tough carbide substrate to balance edge stability and longevity. This configuration is particularly effective where workpieces vary between Stahl and rostfreier Stahl, since the coating reduces flank wear and the substrate resists chipping under interrupted cuts. The ISO-format indexable design simplifies tool changes and supports predictable tool life, which improves planning and reduces unplanned machine downtime. Geometry engineered for productivity and finish The square plate geometry with a 90° included angle and a 1.2 mm nose radius offers a compromise between edge strength and surface finish: the larger nose radius stabilises the cutting edge for heavier passes, while the 7° clearance angle maintains good cutting clearance and reduces rubbing. The chipbreaker PM is matched to the insert form to control chip flow in typical turning operations, and the insert’s hole and countersink arrangement ensure secure clamping in compatible holders. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness of the holder system. Designed for process security and ease of integration As an ISO-standard turning insert, the SCMT120412-PM can be integrated into existing tool systems with minimal adaptation. The AH725 composition is intended as a universal, breakage-resistant grade suitable for smaller tools and setups demanding high process security. Reduced frequency of unexpected edge failures translates into lower tool consumption and more consistent component tolerances, supporting efficient production workflows and better first-pass yields. For technical advice or to source the SCMT120412-PM AH725 insert from Metav Werkzeuge—including delivery and compatibility checks—contact Metav Werkzeuge for tailored guidance and prompt supply Technical data Article number: 6856715 Manufacturer SKU: TUN6856715 Supplier SKU: 6856715-Tungaloy ISO designation: SCMT120412-PM Numbers / Core technical data Plate size: 12 mm Plate thickness: 4.76 mm Nose radius: 1.2 mm Clearance angle: 7° Included angle: 90° Countersink angle range: 40°–60° Special features / Materials Material: carbide Coating: PVD Grade: AH725 Chipbreaker: PM Shape: square Hole: cylindrical hole with single-sided countersink Application: turning (external and internal) Model series: ISO indexable turning inserts FAQ What materials is this insert suitable for? The SCMT120412-PM AH725 insert is designed for a broad material range, with the AH725 grade particularly suited to Stahl and rostfreier Stahl applications where process security is important. How does the PM chipbreaker affect machining? The chipbreaker PM guides chip formation for typical turning tasks, improving evacuation and reducing the risk of entanglement in both external and internal turning operations. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the insert’s cylindrical hole with single-sided countersink is intended for standard clamping systems that accept this ISO variant. What are the main dimensional characteristics to check before ordering? Key dimensions include plate size (12 mm), plate thickness (4.76 mm), nose radius (1.2 mm) and clearance angle (7°); these determine fit and expected cutting performance. Is this an indexable ISO-format insert and how does that help production? Yes — the SCMT120412-PM is an ISO indexable insert; its standard format enables quick indexing and replacement, supporting predictable tool life and reduced downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120412 NS9530 Wendeplatten - Tungaloy
Take advantage of the uncoated cermet NS9530 for superior finishing and the PM chipbreaker for predictable chip control; order directly via Metav Werkzeuge or consult the technical team for application advice. SCMT 120412 NS9530 — SCMT120412-PM turning insert by Tungaloy SCMT120412-PM NS9530 is an ISO square turning insert designed for finishing operations in steel, offering a sharp cutting edge and stable chip formation Finishing-grade uncoated cermet NS9530 Sharp edge for low cutting forces Optimised PM chipbreaker for continuous cuts ISO SCMT 120412 with 90° geometry Precision finishing with an uncoated cermet for excellent surface quality The uncoated cermet NS9530 is engineered as a dedicated finishing grade for steel, delivering a sharp cutting edge that reduces cutting forces and improves stability during light cuts. For shops focused on superior surface integrity, this substrate lowers the risk of torn edges and minimises the need for secondary finishing operations. The material composition and edge preparation are chosen to provide consistent results during steady, continuous machining at small depths of cut. Predictable process behaviour thanks to ISO geometry and clear specifications Built to ISO standards, the insert features a square geometry with a 90° included angle and a 1.2 mm corner radius, ensuring repeatable seating and clamping in compatible holders. Compatibility to the toolholder is determined by form, relief angle, tolerance class, clamping and thickness; this insert’s 7° relief angle and 4.76 mm thickness are clearly specified for straightforward tool selection. Such defined parameters enable stable cutting conditions and simplify tool changeovers, reducing setup time and enhancing production reliability. Chip control and application suitability for efficient finishing cycles The integrated PM chipbreaker was selected to support continuous cutting and fine feeds typical of finishing passes in steel, promoting short, manageable chips and consistent surface finish. The insert is supplied with a cylindrical hole plus a single-sided countersink (40°–60°) to match common clamping systems, and its compact 12 mm seat size is suitable for both external and internal turning where a high-quality finish is required. The combination of substrate and chipbreaker reduces rework, contributing to improved process economy in precision turning operations. Contact Metav Werkzeuge for tailored application advice and to secure SCMT120412-PM NS9530 inserts from Tungaloy via Metav Werkzeuge’s sales team Technical Data Article number: 6998496 Manufacturer SKU: TUN6998496 Label: SCMT120412-PM NS9530 Tungaloy turning insert Core Data Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 7° Included angle: 90° Features Material: cemented carbide Grade: uncoated cermet NS9530 Chipbreaker: PM Shape: square Hole style: cylindrical hole + single-sided countersink (40°–60°) Application: turning, finishing for steel FAQ What materials is this insert intended for? The SCMT120412-PM NS9530 insert is optimised for finishing operations in steel, providing low cutting forces and a high-quality surface finish. Can the insert be used for internal turning as well as external turning? Yes, the design and ISO form of the SCMT120412-PM make it suitable for both external and internal turning when paired with an appropriate holder. How does the PM chipbreaker affect machining? The PM chipbreaker promotes short, controlled chips during continuous cuts and fine feeds, improving surface quality and easing chip evacuation. What determines compatibility with a toolholder? Compatibility is determined by the insert form, relief angle, tolerance class, clamping type, size and thickness; the SCMT120412-PM’s dimensions (12 mm, 4.76 mm thickness, 7° relief) are provided for correct holder selection. Is this product supplied with a hole for clamping? Yes, the insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to match common clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SCMT 120412 T6215 Wendeplatten - Tungaloy
Take advantage of the T6215 CVD coating and the PM chipbreaker for consistent chip control when machining rostfreien Stahl; the ISO format ensures simple integration into standard toolholders. Order the insert directly via Metav Werkzeuge or consult the team for application advice. SCMT120412-PM T6215 ISO turning insert for turning rostfreien Stahl — Tungaloy The SCMT120412-PM T6215 is an ISO-format turning insert designed for external and internal turning of rostfreien Stahl under stable to lightly interrupted cutting conditions. CVD-coated carbide T6215 grade Optimised for rostfreien Stahl turning PM chipbreaker for consistent chip control ISO SCMT 120412 format, 1.2 mm radius Improved surface finish through controlled chip formation The combination of the PM chipbreaker geometry and the CVD-coated carbide substrate delivers controlled chip formation and predictable material flow during cutting. This reduces the risk of built-up edge and improves surface quality when working with rostfreien Stahl, where edge adhesion and work hardening can be problematic. The chipbreaker profile is intended for stable to slightly interrupted cuts and translates directly into fewer scrap parts and reduced secondary finishing. The result is a more efficient machining process and greater confidence in repeatability during series production. Reliable clamping and exact fit in ISO toolholders The insert follows the ISO format SCMT 120412, with a square 12 mm size, 1.2 mm corner radius and 4.76 mm thickness, making it compatible with a wide range of indexable turning holders. The cylindrical hole with one-sided countersink (40°–60°) secures the insert position and supports repeatable seating, while the 7° relief ensures the correct cutting clearance for conventional turning setups. Compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness, which simplifies selection when matching to existing tool systems. Durable grade and suitable applications for efficient production The T6215 grade is a wear-resistant, CVD-coated carbide developed for machining rostfreien Stahl under consistent conditions. Its balanced toughness and coating hardness help maintain a stable cutting edge, extending tool life in productive turning operations. Typical uses include external profiling, finishing passes and moderate roughing where tool stability is good. When machining less stable setups or heavily interrupted cuts, selecting a different chipbreaker or adapting cutting data will preserve performance and minimise risk. Contact Metav Werkzeuge for application support on Tungaloy inserts or to order the SCMT120412-PM; technical enquiries can be sent to info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6903107 Manufacturer SKU: TUN6903107 Supplier SKU: 6903107-Tungaloy Model series: ISO turning inserts Designation: SCMT120412-PM Grade / coating: T6215, CVD-coated carbide Numbers / Facts Insert size: 12 mm Corner radius: 1.2 mm Thickness: 4.76 mm Relief angle: 7° Included angle: 90° Manufacturer article number: 6903107 Special features / Versions PM chipbreaker geometry Square insert form Cylindrical hole with one-sided countersink (40°–60°) Carbide substrate (Hartmetall) ISO-format for standard turning holders Optimised for rostfreien Stahl under stable to slightly interrupted cuts FAQ What materials is this insert best suited for? The SCMT120412-PM in T6215 is optimised for rostfreien Stahl and provides wear resistance and edge stability for that material group. Which chipbreaker is integrated and what is its benefit? The insert features a PM chipbreaker, which offers reliable chip control and smoother surface finish in continuous to lightly interrupted turning operations. Is the insert compatible with standard ISO toolholders? Yes, the SCMT120412-PM follows the ISO SCMT 120412 format; compatibility is determined by shape, relief angle, tolerance class, fastening method, size and thickness. How does the T6215 grade compare for durability? T6215 is a wear-resistant, CVD-coated carbide grade designed to maintain a stable cutting edge when machining rostfreien Stahl, extending tool life in productive operations. Can this insert be used for internal turning? The insert is suitable for both external and internal turning; selection of holder and cutting data should reflect the specific internal geometry and accessibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com