SNMG 120408 AH6225 Wendeplatten - Tungaloy
Combine the PVD‑coated carbide AH6225 for a stable, sharp cutting edge with the 0.8 mm corner radius to achieve consistent performance on stainless steels; the ISO‑standard geometry ensures simple holder matching and a dependable production flow. Order the insert directly via Metav Werkzeuge or contact their consultants for application support and availability. SNMG120408 AH6225 Tungaloy turning insert — PVD‑coated carbide, 0.8 mm radius The SNMG120408 AH6225 Tungaloy is an ISO square turning insert designed for external and internal turning, optimised for medium machining of stainless steels and variable operating conditions. PVD-coated carbide grade AH6225 Designed for stainless steels Square insert, 90° cutting angle Double-sided chipbreaker, consistent chips Stable cutting performance where it matters The combination of the AH6225 grade and a PVD finish on carbide provides a balance between a sharp cutting edge and wear resistance. That balance reduces the risk of rapid edge breakdown when machining stainless steels, especially under interrupted cuts or variable feeds. The 0.8 mm corner radius supports predictable strength at the cutting edge, which leads to longer effective tool life and fewer unexpected tool changes, contributing to improved machine uptime and consistent part quality. ISO geometry for reliable holder compatibility The insert follows the ISO designation and a 90° included angle in a square format, with a plate thickness of 4.76 mm and an inscribed circle size of 12 mm. The cylindrical hole and standard fixing method make it straightforward to match with compatible external holders or boring bars. Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; specifying these values at procurement ensures correct seating and clamping, reducing setup time and the risk of runout or instability during turning operations. Controlled chips and productive machining A double-sided chipbreaker delivers consistent chip formation and evacuation in turning applications, which helps maintain a steady cutting process and improves surface finish quality. The PVD layer reduces built‑up edge tendency and enhances thermal resilience during medium cutting conditions, supporting higher feed rates where process stability permits. For workshops prioritising repeatability and productivity, this configuration offers a practical balance of tool life and finish without the need for excessive process tuning. If application details are unclear, Metav Werkzeuge provides technical advice to match the insert to the workpiece and machine setup. For application recommendations, availability checks or cutting-parameter guidance for the Tungaloy SNMG120408 AH6225 turning insert, contact Metav Werkzeuge for direct support and tailored advice Technical Data Article number: 6826271 Manufacturer SKU: TUN6826271 SKU: 6826271-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Core Data Corner radius: 0.8 mm Included angle: 90° Thickness: 4.76 mm Inscribed circle / size: 12 mm Manufacturer article number: 6826271 Design and Features Material: carbide Coating: PVD Grade: AH6225 Shape: square insert Hole: cylindrical hole Chipbreaker: double-sided chipbreaker Application: turning (external and internal) Suitable for: stainless steels Compatibility: ISO indexable insert system FAQ Is this insert suitable for machining stainless steels? Yes. The SNMG120408 AH6225 insert is formulated as a universal grade for stainless steels, offering a sharp yet stable cutting edge for medium turning operations. How is compatibility with toolholders ensured? Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; the SNMG120408 follows ISO dimensions to simplify matching with standard external holders and boring bars. What advantage does the double-sided chipbreaker offer? The double-sided chipbreaker provides consistent chip control on both indexed positions, improving stability and helping to maintain a reliable surface finish across multiple tool indexes. What benefits does the PVD coating provide on this grade? The PVD layer increases wear resistance, reduces built-up edge formation and improves thermal behaviour during medium machining, which supports longer tool life and steadier process results. Can this insert be used for both external and internal turning? Yes. The square ISO geometry and reliable clamping make the insert suitable for both external and internal turning applications when the holder and setup are matched correctly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH6235 Wendeplatten - Tungaloy
SNMG120408 AH6235 Drehwendeschneidplatte für Drehen von Tungaloy SNMG120408 AH6235 ist eine ISO-genormte Drehwendeschneidplatte für effizientes Außen- und Innendrehen an rostfreien Stählen SNMG120408 AH6235 von Tungaloy PVD-beschichtetes Hartmetall für rostfreie Stähle Doppelseitiger Spanbrecher für stabile Spanbildung Zylindrisches Loch, kompatibel mit gängigen Haltern Eckenradius 0,8 mm für feine Konturen Maximale Produktivität durch stabile Spanformung Die SNMG120408 AH6235 liefert eine hohe Prozesssicherheit bei anspruchsvollen Dreharbeiten. Durch die Kombination aus zäher Hartmetalllegierung und optimiertem Spanbrecher reduziert sich die Ausbruchsneigung, was die Standzeit erhöht und Rüstkosten senkt. Fertigungsbetriebe profitieren von konstanter Werkstückqualität und geringerer Nacharbeit bei Serien- und Einzelteilfertigung. Materialeigenschaften und Vorteile der Beschichtung Die Platte besteht aus Hartmetall mit PVD-Beschichtung (physikalische Dampfabscheidung), die Verschleißwiderstand und Oxidationsschutz verbessert. Diese Sorte ist speziell für rostfreie Stähle und unterbrochenen Schnitt ausgelegt, weil die zähere Mikrostruktur Ausbrüche verhindert. Anwender erhalten somit eine zuverlässige Schneidkante und gleichbleibende Oberflächenqualität. Systemkompatibilität und Hinweise zur Auswahl Die Platte ist ISO-genormt; die Kompatibilität zum Halter hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Bei der Auswahl sind zylindrisches Loch und Plattenmaß 12 sowie Plattendicke 4,76 mm zu beachten. Für optimale Ergebnisse sollte der passende Außenhalter, Unterlage und Klemmsatz verwendet werden; der doppelseitige Spanbrecher erlaubt mehrfachen Plattenwechsel bei guter Wirtschaftlichkeit. Für wen sich die Platte eignet und typische Anwendungen Werkstätten, Lohnfertiger und Serienbetriebe mit Schwerpunkt rostfreie Werkstoffe finden in dieser Platte eine praxistaugliche Lösung. Typische Anwendungen sind Außen- und Innendrehen bei hoher Temperaturbeständigkeit und erhöhtem Ausbruchrisiko. Der Eckenradius 0,8 mm bietet Präzision bei Konturen und ermöglicht feine Formgebung bei anspruchsvollen Bauteilen. Empfehlung: Die SNMG120408 AH6235 von Tungaloy empfiehlt sich für produktive Drehprozesse an rostfreien Stählen; bei technischen Fragen kontaktieren Sie Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6888986 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: SNMG120408 AH6235 Tungaloy-Wendeplatte SKU: 6888986-Tungaloy Daten Eckenradius: 0,8 mm Plattengröße: 12 mm Plattendicke: 4,76 mm Winkel: 90° Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall (PVD = physikalische Dampfabscheidung) Sorte: AH6235 Spanbrecher: doppelseitig Plattenform: quadratisch Loch: mit Loch Lochstil: zylindrisches Loch Anwendung: Drehen ISO-Norm: ISO-Drehwendeschneidplatten FAQ Welche Werkstoffe bearbeitet die SNMG120408 AH6235 am besten? Die SNMG120408 AH6235 von Tungaloy ist für rostfreie Stähle optimiert und eignet sich besonders bei unterbrochenem Schnitt und erhöhtem Ausbruchrisiko; die zähere Sorte sorgt für stabile Spanbildung. Ist die Platte mit Standard-Außenhaltern kompatibel? Ja, die SNMG120408 AH6235 folgt ISO-Normen; Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Wie beeinflusst die PVD-Beschichtung die Standzeit? Die PVD-Beschichtung der SNMG120408 AH6235 erhöht Verschleißwiderstand und Wärmebeständigkeit, was zu längeren Standzeiten und konstanter Oberflächengüte führt. Für welche Bearbeitungsarten ist die Platte ausgelegt? Die SNMG120408 AH6235 eignet sich für Außen- und Innendrehen; der doppelseitige Spanbrecher ermöglicht wirtschaftliche Einsatzzyklen bei Serienfertigung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG 120408 AH6235 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade designed for demanding turning operations: excellent edge stability, a 0.8 mm corner radius for robust engagement, and a double‑sided chipbreaker that supports reliable chip control in interrupted cuts. Order the insert directly via Metav Werkzeuge or consult the team for application advice. SNMG 120408 AH6235 — Turning insert, PVD‑coated carbide, Tungaloy The SNMG120408 AH6235 Tungaloy insert is a square, ISO‑standard turning insert engineered for external and internal turning of stainless steels and for operations with increased risk of edge breakout. PVD-coated carbide AH6235 0.8 mm corner radius Double-sided chipbreaker ISO-standard square insert High‑performance grade for demanding stainless steel turning The PVD‑coated AH6235 grade provides a tougher carbide substrate with a wear‑resistant finish that extends edge life under interrupted cuts and variable load conditions. The coating enhances thermal stability and reduces adhesive wear common when machining stainless steel, which leads to fewer tool changes and more consistent cycle times. This results in measurable productivity gains and predictable performance in serial turning tasks. Geometry that protects the edge and improves process stability A 0.8 mm corner radius combined with a 90° insert angle gives a strong cutting edge for heavy engagement without sacrificing dimensional control. The double‑sided chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and surface defects in both external and internal turning. These geometry features help maintain surface integrity and reduce rework, supporting continuous production flows. Compatibility and mounting for standard turning toolholders The insert is ISO‑designated and compatible with holders that match form, clearance angle and size — the plate thickness is 4.76 mm and the square format is 12 mm across the corner size. The variant supplied includes a cylindrical mounting hole for secure clamping. This standardisation simplifies tool inventory management and ensures straightforward replacement in conventional turning tool systems. Application focus and recommended use cases Designed primarily for turning (Drehen) operations, this grade is especially suitable for stainless steels and for interrupted cuts where enhanced toughness reduces chipping risk. Select the AH6235 grade when process reliability in tougher materials is a priority; the combination of PVD coating and a robust substrate gives a reliable balance between edge life and surface finish quality. For machining applications that demand consistent edge stability, contact Metav Werkzeuge to secure the SNMG120408 AH6235 insert or to request tailored application recommendations. Technical data Article number: 6888981 SKU: 6888981-Tungaloy Manufacturer SKU: TUN6888981 Model series: ISO-Drehwendeschneidplatten Type designation: SNMG120408 Facts Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Clearance angle: 0° Cutting angle: 90° Special features Material: carbide Coating: PVD (AH6235) Chipbreaker: double-sided Hole: with cylindrical hole Plate form: square Typical application: turning; suitable for stainless steels and interrupted cuts FAQ What materials is this insert best suited for? The SNMG120408 AH6235 insert is optimised for stainless steel machining and performs well in interrupted cuts thanks to the tougher PVD‑coated carbide grade. Is the insert compatible with standard ISO turning holders? Yes, the SNMG120408 follows ISO dimensions and fits holders that match the form, clearance angle and thickness specified for SNMG‑type inserts. What is the corner radius and how does it affect cutting? The corner radius is 0.8 mm, which provides a strong cutting edge for heavy engagement and reduced chipping, improving tool life in demanding turns. Does the insert include a mounting hole and what type is it? The insert is supplied with a cylindrical hole for secure clamping in compatible toolholders. How does the AH6235 coating improve performance? The AH6235 PVD coating increases thermal stability and wear resistance, enhancing edge life and process reliability when machining stainless steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH6235 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH6235 and the double-sided chipbreaker for stable performance in interrupted cuts and applications on stainless steel; the precise 0.8 mm corner radius and 0° clearance support consistent surface quality. Order genuine Tungaloy inserts via Metav Werkzeuge or contact the Metav team for consultancy. SNMG 120408 AH6235 turning insert — PVD-coated carbide for stainless steel, by Tungaloy A Tungaloy SNMG120408 AH6235 indexable insert for turning, engineered for interrupted cuts and demanding stainless steel applications. PVD-coated carbide grade AH6235 For stainless steel and interrupted cuts Double-sided chipbreaker, square form 0.8 mm corner radius, 0° clearance Consistent cutting performance under interrupted conditions The PVD-coated AH6235 grade provides a tough carbide construction designed to resist chipping when machining stainless steel and other demanding alloys. The coating reduces adhesive wear and improves heat resistance at the cutting edge, which translates into longer edge life and fewer interruptions for index changes. This combination of substrate and coating delivers measurable production stability for turning applications where material adhesion and edge breakage are a concern. Geometry that secures repeatable surface quality A square ISO insert with a nominal size of 12 mm and a plate thickness of 4.76 mm offers a rigid cutting interface; the 0.8 mm corner radius contributes to robust edge strength while maintaining surface finish. The insert’s 0° clearance angle and 90° included angle ensure predictable cutting engagement, and the cylindrical locating hole supports accurate seating and repeatable positioning in compatible holders. The ISO-conform geometry simplifies tool selection and reduces setup variability on the shop floor. Economic productivity and easy integration into turning systems The double-sided chipbreaker provides multiple indexed cutting edges, lowering cost per edge and increasing uptime. Compatibility with the holder is determined by form, relief angle, tolerance class, fastening method, size and thickness; this insert integrates into common ISO turning systems for both external and internal turning. By choosing the appropriate chipbreaker and grade for the workpiece and machining stability, the insert helps to reduce scrap and cycle times while supporting consistent results. Contact Metav Werkzeuge today to discuss application-specific selection of Tungaloy SNMG120408 AH6235 inserts and arrange supply or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6888773 Manufacturer SKU: TUN6888773 SKU: 6888773-Tungaloy Designation: SNMG120408 AH6235 Manufacturer: Tungaloy Data Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 90° Hole style: Cylindrical hole Special features Material: carbide Coating: PVD Grade: AH6235 — tougher grade for stainless steel and interrupted cuts Shape: square Chipbreaker: double-sided Application: turning (external and internal) ISO standard insert series FAQ Is this insert suitable for stainless steel? Yes. The SNMG120408 AH6235 from Tungaloy is specified for stainless steel and interrupted cutting conditions thanks to its tougher carbide substrate and PVD coating. How does the chipbreaker design affect performance? The double-sided chipbreaker on this turning insert promotes controlled chip formation and allows multiple indexed edges, improving process reliability and lowering cost per cutting edge. Which holders will accept this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the ISO-conform geometry of the SNMG120408 simplifies selection of a matching external holder or boring bar. Can the insert be used for internal turning as well as external turning? Yes. The insert is designed for both external and internal turning operations; selection of the correct chipbreaker and holder ensures stable cutting and the best surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of durability, predictable chip control and ISO compatibility to maintain production flow with minimal interruptions. The PVD‑coated carbide grade AH6235 provides robust edge stability for stainless steels and interrupted cuts; order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. SNMG 120408 AH6235 indexable insert for turning by Tungaloy — PVD‑coated carbide, 0° clearance The SNMG120408 AH6235 Tungaloy insert is an ISO‑standard, square indexable insert designed for external and internal turning, optimised for stainless steels and interrupted‑cut applications. PVD-coated carbide grade AH6235 Optimised for stainless steels and interrupted cuts Double-sided chipbreaker for stable chips ISO SNMG120408 with cylindrical hole High edge security for demanding turning operations The combination of a PVD‑coated surface and a tougher carbide substrate in grade AH6235 increases resistance to chipping and flank wear under unstable cutting conditions. For components made from stainless steel or where interrupted cuts are frequent, this translates into longer edge life and fewer indexings per workpiece batch. The result is a measurable improvement in process stability and consistent surface finish, reducing scrap rates and helping maintain tight tolerances in production. Predictable chip control that reduces secondary operations The double-sided chipbreaker geometry is engineered to produce short, controllable chips across a range of feeds and depths of cut. With a corner radius of 0.8 mm and the defined geometry of the insert, the cutting forces are distributed in a way that improves vibration behaviour and surface integrity. This leads to fewer downstream operations such as rework or manual deburring and contributes to overall cycle‑time savings on both turning centres and turret lathes. ISO compatibility and straightforward toolroom handling As an ISO‑standard SNMG120408 insert with a cylindrical hole, the part is compatible with a broad range of ISO external holders and boring bars; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The 4.76 mm plate thickness and square form offer simple indexing and a clear replacement routine, which limits machine downtime and simplifies inventory management. Where tool systems are shared across several machines, the standardised interface helps ensure predictable mounting and repeatable cutting performance. Practical benefits for series production and mixed batches Designed for turning applications where material mix and interrupted cuts occur, this insert offers a cost‑effective way to balance tool life and part quality. The robust grade minimises unplanned tool changes under difficult cut conditions, while the coated surface supports elevated cutting speeds when process stability allows. For production planners, this means a lower total cost of machining and more reliable lead times. For a tailored recommendation or to check holder compatibility for this Tungaloy insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a technical consultation. Technical data Article number: 6888985 Manufacturer SKU: TUN6888985 Brand: Tungaloy Model series: ISO turning indexable inserts Insert designation: SNMG120408 AH6235 Material: Carbide Core data Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle / size: 12 mm Cutting angle: 90° Clearance angle: 0° Special features PVD-coated carbide AH6235 Double-sided chipbreaker Cylindrical hole Square plate form Suitable for external and internal turning Optimised for stainless steels and interrupted cuts ISO-standard SNMG120408 Compatible with ISO holders FAQ What materials is this insert best suited for? This SNMG120408 AH6235 insert is optimised for machining stainless steel and performs well in interrupted cutting conditions. Is the insert reversible or single-use? The SNMG120408 AH6235 is double-sided, allowing reversible indexing to extend the usable life of the insert. How does the AH6235 grade affect cutting parameters? The AH6235 grade provides increased toughness and chipping resistance; as a result, reliable performance can be achieved at moderate to elevated cutting speeds with reduced risk of edge failure. Which holder types are compatible with SNMG120408? Compatibility depends on the holder’s form, clearance angle, tolerance class and fastening method; SNMG120408 follows ISO dimensions and fits standard ISO external holders with a cylindrical hole interface. What operational benefits does the PVD coating provide? The PVD coating enhances wear resistance and reduces built‑up edge formation, improving tool life and surface finish during production turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH6235 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH6235 carbide grade and a 0.8 mm corner radius to improve resistance to chipping in demanding stainless-steel applications; the ISO geometry ensures straightforward holder compatibility for efficient changeovers. Order the SNMG120408 AH6235 turning insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. SNMG120408 AH6235 SNMG Turning Insert by Tungaloy — PVD-coated carbide, 0.8 mm radius The SNMG120408 AH6235 is an ISO-format turning insert for external and internal turning, engineered for interrupted cuts and tough rostfrei applications where edge security and predictable wear are essential. PVD-coated carbide AH6235 0.8 mm corner radius for durable edge ISO SNMG120408 square insert Double-sided chipbreaker, cylindrical hole Reliable edge security for demanding stainless-steel turning The combination of a PVD-coated surface and the AH6235 carbide formulation provides enhanced resistance to wear and thermal loading, which is particularly important when machining stainless steel or other work-hardened alloys. The 0.8 mm corner radius increases the edge's mechanical strength and reduces susceptibility to micro‑fracture during interrupted cuts. This results in more consistent component quality and fewer unplanned tool changes, helping to maintain cycle times and reduce scrap rates. The coating also aids in adhesion resistance, extending tool life in high-temperature zones. Designed for precise system integration and repeatable set-up Compliance with the ISO SNMG120408 designation simplifies toolholder selection: geometry, relief angle, tolerance class, fastening method, size and thickness determine compatibility. The insert’s square form and cylindrical hole ensure secure clamping and repeatable positioning in a suitable external holder or boring bar. A correctly matched underlay and clamping set allow rapid indexing and consistent runout control, which supports predictable surface finish and dimensional accuracy. Clear reference to the system build—insert, holder, shim/clamp and replacement screws—reduces setup errors and supports efficient production workflows. Optimise productivity through fewer interruptions and flexible application The double-sided chipbreaker offers economical use of the cutting edges and enables multiple indexings before replacement, lowering per-part tooling costs. The tougher grade is tailored for operations with increased breakout risk and provides an advantage in unstable or interrupted machining conditions. Selecting the appropriate chipbreaker and grade relative to workpiece material and machining stability leads to measurable improvements in throughput and tool life. Where process stability allows, the insert’s geometry contributes to consistent chip control and better surface quality, supporting a reliable, cost‑efficient turning process. Contact Metav Werkzeuge for tailored recommendations on Tungaloy AH6235 applications or to request detailed technical data at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6888979-Tungaloy Manufacturer article number: 6888979 Manufacturer SKU: TUN6888979 Brand: Tungaloy Facts ISO designation: 120408 Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief/clearance angle: 0° Included angle: 90° Design & Features Material: carbide Coating: PVD Grade: AH6235 Form: square insert (SNMG) Chipbreaker: double-sided Hole: cylindrical hole for clamping Typical application: turning (external and internal) Model series: ISO turning inserts FAQ What materials is this insert suitable for? The SNMG120408 AH6235 is formulated for stainless steel and similar tough alloys; the AH6235 grade and PVD-coated surface give improved resistance in demanding rostfrei machining. Is the insert suitable for interrupted cuts? Yes. The tougher AH6235 grade and a 0.8 mm corner radius make the insert appropriate for interrupted cutting where increased breakout risk occurs. How is compatibility with a toolholder determined? Compatibility depends on the insert’s form, relief angle, tolerance class, fastening, size and thickness; the ISO SNMG120408 designation helps to match a suitable external holder or boring bar for the insert. Can the insert be indexed to present fresh cutting edges? The insert design features a double-sided chipbreaker and a clamping hole, allowing multiple indexings to use fresh edges; consult the technical datasheet for the exact number of indexings for this SKU. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide AH6235 for improved wear resistance, a double‑sided chipbreaker for extended edge life, and precise ISO compatibility to secure consistent turning performance; order the SNMG120408 AH6235 insert directly via Metav Werkzeuge or consult the specialists for application support. SNMG 120408 AH6235 square turning insert — PVD‑coated carbide, for turning | Tungaloy The SNMG 120408 AH6235 is an ISO‑standard square insert designed for external and internal turning, optimised for machining stainless steel and demanding interrupted cuts. PVD‑coated carbide grade AH6235 Suitable for stainless steel machining Double‑sided chipbreaker for extended life Square 12 mm size with cylindrical hole Higher performance in stainless steel and interrupted cuts The insert combines a PVD‑coated surface with a tough carbide substrate in grade AH6235, providing enhanced edge stability in the presence of workhardening and thermal loading. The PVD coating reduces adhesive wear and improves heat resistance, which helps maintain cutting-edge geometry during prolonged operations. For interrupted cuts and applications with elevated breakage risk the tougher grade minimises chipping and enables more consistent cycle times. This performance translates into fewer indexings and less spindle downtime, supporting a more efficient production flow. Precise geometry and straightforward toolholder compatibility Manufactured to ISO‑standard dimensions, the insert’s square 12 mm format, 4.76 mm thickness and cylindrical hole permit straightforward mounting in compatible external holders or boring bars. The 90° included angle and 0.8 mm corner radius deliver a balance between edge strength and form accuracy; the listed 0° clearance suits typical ISO SNMG seating. Compatibility to a toolholder is determined by form, clearance angle, tolerance class, clamping method, size and thickness — matching these ensures stable cutting conditions and repeatable part quality. Where uncertainty exists, verify holder specifications against the insert’s ISO designation before assembly. Durable edge life and process security for production environments The double‑sided chipbreaker provides two usable cutting edges per side, enabling efficient indexing and lower tooling cost per edge. The insert’s tougher composition and optimised chip control promote stable chip formation when machining stainless steel, reducing the risk of built‑up edge and surface defects. In assembly-line and job‑shop environments this combination supports predictable tool life and improved first‑pass yield. The insert is supplied as part of a system comprising the insert, matched external holder or boring bar, clamping plate/kit and replacement screws to maintain consistent clamping and minimise set‑up variability. For demanding turning operations of stainless steels, specify the Tungaloy SNMG120408 AH6235 insert and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6887714 Manufacturer SKU: TUN6887714 SKU: 6887714-Tungaloy Model series: ISO‑Drehwendeschneidplatten Core Data ISO designation: SNMG120408 Grade / coating: AH6235, PVD‑coated carbide Plate size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 90° Clearance (relief) angle: 0° Hole style: with cylindrical hole Special features Square plate form Double‑sided chipbreaker Intended application: turning Typical system: insert, external holder/boring bar, clamping plate and screws FAQ What materials is this insert best suited for? The SNMG120408 AH6235 insert is optimised for stainless steel machining and performs well in interrupted cuts where tougher carbide grades are required. Can the insert be used for internal turning as well as external turning? Yes, the ISO‑standard geometry and cylindrical hole allow secure clamping in appropriate boring bars, so the insert is suitable for both external and internal turning applications. How does the double‑sided chipbreaker affect tool life? The double‑sided chipbreaker provides additional usable edges and improved chip control, which helps increase productive tool life for the SNMG120408 AH6235 and reduces the frequency of insert changes. Which holder characteristics must match the insert? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; matching these ensures stable cutting and repeatable results with the SNMG120408 AH6235. Is the AH6235 grade coated and what does that mean in practice? Yes — the AH6235 is a PVD‑coated carbide grade; the coating enhances wear resistance and thermal stability, resulting in steadier edge life during continuous and interrupted turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH6235 Wendeplatten - Tungaloy
Benefit from a precise, ISO‑conform turning solution that combines a PVD‑coated carbide grade (AH6235) with a 0.8 mm corner radius for dependable performance in stainless steel machining and interrupted cuts; purchase directly via Metav Werkzeuge or consult their technical team for application support. SNMG 120408 AH6235 Tungaloy turning insert — PVD‑coated carbide, 0.8 mm radius The SNMG120408 AH6235 is an ISO‑standard turning insert designed for external and internal turning, optimised for stainless steels and interrupted cuts and compatible with standard square insert holders. PVD-coated carbide grade AH6235 Optimised for stainless steels and interrupted cuts Double-sided chipbreaker, square 12 mm form 0.8 mm corner radius, 4.76 mm plate thickness High‑performance grade for challenging stainless steel work The insert’s PVD‑coated carbide composition and the AH6235 grade deliver a tougher cutting edge that is especially suited to stainless steels and operations with interrupted cuts or an elevated risk of edge chipping. This combination reduces the incidence of built‑up edge and helps maintain consistent cutting geometry over longer tool life, leading to fewer indexings and improved process stability. Machining cycles that demand robustness rather than maximum cutting speed will particularly benefit from this grade’s balanced wear resistance and fracture toughness. ISO geometry and secure holder compatibility for reliable set‑ups Built to ISO dimensions, the SNMG form offers a square insert with a nominal size of 12 mm, 4.76 mm plate thickness and an included angle of 90°, featuring a 0.8 mm corner radius and a 0° relief angle. The insert is supplied with a cylindrical hole for positive clamping. Compatibility with a chosen holder depends on matching the insert’s form, relief angle, tolerance class, clamping method, size and thickness; this ISO conformity ensures straightforward replacement and interchangeability in existing turning tool systems. Process benefits and application guidance for workshop efficiency The double‑sided chipbreaker design supports predictable chip formation and helps maintain surface finish during both external and internal turning. The insert suits applications where interrupted cuts occur, and where a tougher grade is preferable to softer, higher‑speed alternatives. Selection of the correct chipbreaker and grade should be aligned with workpiece stability and machining strategy; specifying the AH6235 grade with the SNMG120408 geometry provides an effective compromise between productivity and edge security. System approach, handling and economic advantages As part of a complete turning system — insert, matching outer holder or boring bar, backing/clamping set and fasteners — the SNMG120408 insert enables quick index changes and reduced downtime due to its standardised form. The PVD coating contributes to consistent wear behaviour, improving surface quality and extending tool life under demanding conditions. For shops prioritising repeatable results and lower process variability, this insert supports a more predictable production flow and easier tool management. Contact Metav Werkzeuge for tailored recommendations on Tungaloy turning inserts and specify SNMG120408 AH6235 for robust stainless steel turning; email info@metav-werkzeuge.com or call +49 2822 7131930 for application advice Technical data Article number: 6892190 Manufacturer SKU: TUN6892190 Item label: SNMG120408 AH6235 Tungaloy turning insert Manufacturer: Tungaloy Key dimensions Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 90° Relief angle: 0° Hole style: cylindrical Plate form: square Materials & features Material: carbide Coating: PVD Grade: AH6235 Application: turning (external and internal) Suitable for: stainless steels, interrupted cuts Chipbreaker: double-sided ISO-standard insert, compatible with standard holders System composition: insert + holder/boring bar + backing/clamp + screws FAQ What materials is this insert best suited for? The SNMG120408 AH6235 insert is formulated for stainless steels and is particularly effective in interrupted cutting scenarios where edge toughness is required. Can the insert be used for internal turning as well as external turning? Yes, the SNMG120408 geometry and the double-sided chipbreaker allow use in both external and internal turning operations when mounted in appropriate holders. How does the AH6235 grade affect tool life and reliability? The AH6235 grade offers a tougher carbide substrate with PVD coating, which improves resistance to chipping and provides more consistent wear behaviour under unstable cutting conditions. What must be considered when selecting a compatible holder? Compatibility depends on matching the insert’s form, relief angle, tolerance class, clamping method, size and thickness; the ISO standardisation of this insert simplifies holder selection. Is the insert suitable for high‑speed finishing operations? The AH6235 grade emphasises toughness for interrupted cuts and stainless steels rather than prioritising maximum cutting speeds; for ultra‑high‑speed finishing, a different grade optimised for higher speed may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH725 Wendeplatten - Tungaloy
Benefit from a PVD-coated AH725 grade that delivers broad material capability and strong chip control, combined with a 0.8 mm corner radius and square, double-sided geometry for efficient indexable turning. Order the SNMG 120408 AH725 Tungaloy turning insert directly via Metav Werkzeuge or request application advice from our consultants. SNMG 120408 AH725 Tungaloy indexable turning insert — for ISO-based turning applications The SNMG120408 AH725 Tungaloy insert is a square, double-sided ISO indexable insert designed for external and internal turning; compatible with holders that match form, relief angle, tolerance class, clamping and plate dimensions. PVD-coated AH725 for mixed materials Square, 90° geometry with 0.8 mm radius Double-sided insert with cylindrical hole ISO‑standardised SNMG 120408 form Stable process security through a universal, PVD-coated grade The AH725 grade is a PVD-coated carbide developed for universal use, offering stable chip formation and resistance to edge breakage when machining a range of steels and stainless steels. For operations where material mixes occur or tool sizes are modest, this grade improves process reliability and reduces unplanned tool changes. The coating enhances wear resistance and helps maintain cutting-edge integrity under varying cutting conditions, which supports consistent cycle times and predictable tool life. Geometry that delivers repeatable precision and easy indexing The square SNMG geometry with a 90° included angle and 0.8 mm corner radius provides a predictable cutting profile for finishing and medium machining. The plate thickness of 4.76 mm and the central cylindrical hole enable secure clamping and straightforward indexing; being double-sided effectively doubles the usable edges per insert. This combination results in reliable clamping behaviour, repeatable part dimensions and straightforward maintenance of cutting geometry in serial production. System compatibility and selection guidance for efficient integration Compatibility depends on form, relief angle (0° free angle), tolerance class, clamping method, size and thickness; the ISO model series ensures straightforward matching with standard external holders, boring bars, shims and clamp sets. Choose the double-sided chipbreaker style that matches material and stability requirements to optimise chip control and surface finish. For mixed-material applications and processes with high demands on security, the AH725 grade is a sound choice that balances wear resistance and fracture toughness. Contact Metav Werkzeuge for stock availability, machining recommendations and delivery details — Metav Werkzeuge (Parkring 45, 46446 Emmerich, Germany) can advise on the right holders and spare parts for the SNMG 120408 AH725 Tungaloy insert. Email: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical data Article number: 6861212 Manufacturer SKU: TUN6861212 Dealer SKU: 6861212-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: SNMG120408 Name: SNMG120408 AH725 Tungaloy-Wendeplatte Numbers / Core technical data Plate size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 90° Free angle: 0° Hole: with hole (cylindrical hole) Designs / Special features Material: carbide (Hartmetall) Grade / coating: AH725 (PVD-coated) Plate form: square (quadratisch) Chipbreaker: double-sided (doppelseitig) Application: turning (Drehen) System components: insert, compatible external holder/boring bar, shim/clamp set, spare screws FAQ What materials is this insert suitable for? The SNMG120408 AH725 Tungaloy indexable insert is designed for machining a broad range of steels and stainless steels; the AH725 PVD-coated carbide provides balanced wear resistance and toughness for mixed-material work. How does the 0.8 mm corner radius affect machining performance? A 0.8 mm corner radius on the SNMG 120408 insert increases edge strength for finishing and light-medium turning, improving surface finish consistency while reducing the risk of radius-related breakouts. Is the insert reversible and how many cutting edges are available? The square, double-sided design offers four usable cutting edges per side for a total of eight potential edges, depending on the chosen indexing and regrinding strategy for the SNMG120408 AH725 Tungaloy insert. Which holders and clamping components are required for proper compatibility? Compatibility is determined by form, free angle, tolerance class, clamping and plate dimensions; an ISO‑compliant external turning holder, the correct shim and clamp set, and matching hex screws ensure secure clamping of this insert. What is the manufacturer SKU and article number for ordering? Article number 6861212 and manufacturer SKU TUN6861212 identify the SNMG120408 AH725 Tungaloy insert for procurement and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH8005 Wendeplatten - Tungaloy
Benefit from a wear‑resistant PVD‑coated carbide grade and the ISO SNMG120408 geometry for consistent, stable turning of heat‑resistant alloys; the result is higher productivity and longer tool life. Order the SNMG120408 AH8005 Tungaloy turning insert via Metav Werkzeuge or consult the technical team for tailored recommendations. SNMG120408 AH8005 SNMG – Indexable turning insert for turning applications by Tungaloy The SNMG120408 AH8005 Tungaloy insert is an ISO‑standard square indexable insert designed for external and internal turning, suited to stable machining of heat‑resistant alloys and other hard materials. PVD‑coated carbide grade AH8005 ISO SNMG120408 square insert 0° relief angle, 90° cutting geometry Double‑sided chipbreaker, 0.8 mm corner radius Stable performance for demanding turning operations The combination of a PVD‑coated surface and a wear‑resistant carbide substrate in grade AH8005 delivers consistent cutting performance in demanding conditions. This insert is engineered to maintain a reliable cutting edge when machining heat‑resistant alloys and hard materials, so operators benefit from longer cutting intervals and fewer indexings. The focus here is on achieving predictable productivity and reduced downtime through material and coating synergies. Geometry and clamping for rigidity and repeatability With the ISO SNMG120408 form and a square plate geometry, the insert provides stable contact with the holder and predictable chip flow. The 0° relief angle and 90° cutting geometry promote axial stability during external and internal turning, while the 0.8 mm corner radius supports edge strength for interrupted cuts. These geometric choices translate into improved surface finishes and repeatable part quality under stable machining conditions. Optimised chip control and versatile application The double‑sided chipbreaker is matched to the AH8005 grade to enable controlled chip formation across a range of cutting parameters. That combination reduces the risk of built‑up edge and makes the insert suitable for steady, productive machining of heat‑resistant alloys. For many workshop setups, this means fewer stall events and more parts produced per tool life interval, improving cost effectiveness in the production chain. Compatibility guidance and system considerations The insert is an ISO indexable plate and compatibility with a holder depends on form, relief angle, tolerance class, attachment method, size and thickness. The SNMG120408 is supplied with a cylindrical hole for secure fastening and has a plate thickness of 4.76 mm, which should be checked against the chosen external holder or boring bar. When selecting tooling, pair the insert with a matching holder and clamping set, and choose a chipbreaker and grade appropriate to material, machining type and process stability. For enquiries about the Tungaloy SNMG120408 AH8005 insert, application recommendations or process optimisation, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6741675 Manufacturer SKU: TUN6741675 Stock SKU: 6741675-Tungaloy Model series: ISO turning indexable inserts Dimensions & geometry Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Cutting angle: 90° Features & materials Material: carbide Coating / grade: AH8005 (PVD‑coated) Plate form: square Chipbreaker: double‑sided Hole: with cylindrical hole Typical application: turning FAQ What materials is this insert best suited for? The SNMG120408 AH8005 insert is optimised for heat‑resistant alloys and other hard materials; the AH8005 grade offers enhanced wear resistance during stable turning. How does the PVD coating improve performance? A PVD‑coating on the carbide substrate increases surface hardness and reduces adhesive wear, which extends the cutting edge life of the SNMG120408 AH8005 Tungaloy insert under elevated temperatures. Can the insert be used for both external and internal turning? Yes. The SNMG120408 geometry and the double‑sided chipbreaker make this indexable insert suitable for both external and internal turning when paired with a compatible holder. What should be checked for holder compatibility? Confirm form, relief angle, tolerance class, attachment type, plate size and thickness (4.76 mm) against the chosen holder or boring bar to ensure a secure, repeatable fit. Is the corner radius suitable for interrupted cuts? The 0.8 mm corner radius provides a robust edge that helps withstand impacts in interrupted machining while still supporting good surface quality. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 AH8005 Wendeplatten - Tungaloy
Combining the AH8005 PVD coating with a robust 0.8 mm corner radius yields a wear-resistant insert engineered for stable turning of heat‑resistant alloys and hard materials; order the SNMG120408 AH8005 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application support. SNMG 120408 AH8005 – Turning Insert, Tungaloy The SNMG120408 AH8005 is an ISO‑standard square turning insert designed for external and internal turning in stable machining environments. SNMG120408 AH8005 PVD-coated carbide insert 0.8 mm corner radius for robust cutting edge Double-sided chipbreaker for consistent chip control Square 12 mm size with cylindrical mounting hole Reliable performance for demanding turning operations The combination of a PVD-coated surface and a carbide substrate provides a clear advantage in abrasive or high‑temperature cutting tasks. The AH8005 grade is formulated for wear resistance when machining heat‑resistant alloys and hard materials, which translates into longer tool life and fewer indexings in stable setups. Selecting this insert reduces unplanned interruptions and supports a predictable production rhythm, especially where consistent edge life is critical. Compatibility and mounting explained for quick integration This insert conforms to ISO geometry and should be matched to an appropriate external holder or boring bar. Compatibility depends on insert form, clearance angle, tolerance class, mounting arrangement, overall size (12 mm) and thickness (4.76 mm). The insert features a cylindrical hole for secure fastening and a square indexable form that offers multiple usable cutting edges. These attributes make it straightforward to replace worn tips and maintain repeatable clamping, provided the holder accepts SNMG‑format inserts. Effective chip control and improved surface quality A double‑sided chipbreaker ensures controlled chip formation across both indexed cutting edges, enhancing process stability and facilitating reliable evacuation. The 0.8 mm corner radius balances edge strength with surface finish, offering improved resistance to chipping while maintaining a smooth workpiece appearance. Together with the PVD surface treatment, the insert helps to reduce built‑up edge and thermal wear, which supports consistent part tolerances and reduces rework. Recommended applications and selection guidance Designed primarily for turning, the insert is especially suited to external and internal operations under rigid, stable setups. The grade and chipbreaker combination is ideal for work on heat‑resistant alloys and other hard-to-machine materials; for optimal results, match the AH8005 grade and chipbreaker style to the specific alloy and stability conditions. If material properties or fixture rigidity are uncertain, technical advice can help select the correct chipbreaker and cutting parameters to maximise productivity. For high‑performance turning with Tungaloy AH8005 inserts, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6741671-Tungaloy Manufacturer article number: 6741671 Manufacturer SKU: TUN6741671 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: SNMG120408 AH8005 Facts Corner radius: 0.8 mm Insert size: 12 mm Thickness: 4.76 mm Clearance angle: 0° Cutting‑edge angle: 90° Special features Coating / grade: AH8005, PVD-coated carbide Material: Hartmetall (carbide) Chipbreaker: double-sided Mounting hole: with cylindrical hole Insert shape: square Application: Drehen (turning) Typical system build: ISO turning insert with matching external holder or boring bar; backing pad, clamping set and replacement screw Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The SNMG120408 AH8005 insert from Tungaloy is formulated for heat‑resistant alloys and hard materials, providing wear resistance under stable machining conditions. Can this insert be used for both external and internal turning? Yes, the insert is designed for external and internal turning operations when matched with a suitable holder and machining parameters. How does the AH8005 grade affect tool life? The AH8005 PVD grade is optimised for abrasion resistance at elevated temperatures, which typically extends edge life compared with uncoated grades when machining hard or heat‑resistant materials. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius offers a compromise between edge strength and surface quality: it improves resistance to chipping while still enabling a fine finish on the workpiece under appropriate cutting conditions. Is the insert reversible and indexable? The square SNMG geometry with a double‑sided chipbreaker provides multiple indexable cutting edges, allowing economical reuse of the insert before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH8015 Wendeplates - Tungaloy
Take advantage of the combination of balanced wear resistance, a secure cylindrical clamping hole and ISO compatibility for efficient turning of heat‑resistant alloys; order the inserts through Metav Werkzeuge or consult our specialists for application-specific grade and chipbreaker advice. SNMG 120408 AH8015 Turning Insert — PVD‑coated carbide, 90° square, Tungaloy The SNMG120408 AH8015 is an ISO‑standard square indexable turning insert designed for external and internal turning, optimised for machining heat‑resistant alloys. PVD‑coated carbide for heat resistance Double‑sided with 0.8 mm corner radius Cylindrical centre hole for secure clamping ISO SNMG form with 90° square geometry Higher productivity through balanced grade and coating The combination of the AH8015 grade and a PVD‑coated carbide substrate provides a practical balance between wear resistance and cutting‑edge stability, which reduces downtime from frequent index changes. The PVD layer acts as a hard, thin barrier against abrasive wear and chemical attack at elevated temperatures; as a result, tool life is extended under interrupted cuts and elevated cutting speeds. This makes the insert particularly suitable where consistent cycle times and predictable tool behaviour are priorities in production. Faster setup and consistent clamping with ISO compatibility Adherence to the ISO designation ensures straightforward interchangeability: the SNMG120408 geometry, 90° square form and a cylindrical centre hole match a wide range of holders when matched for form, relief angle, tolerance class, fastening and thickness. The insert is double‑sided, offering economical use of cutting edges, while the defined 0° relief angle and a 0.8 mm corner radius deliver a consistent cutting profile. These specifications lower setup time and support reproducible results across batches, which benefits process planning and tool inventory control. Practical guidance for workshop selection and machining For external and internal turning of heat‑resistant alloys, select the SNMG120408 variant with the double‑sided chipbreaker suited to the workpiece material and the required surface finish. The square geometry with a 90° cutting angle is advantageous for shoulder cuts and general turning operations, providing robust support against vibration. Where higher temperature resistance is needed, the PVD coating and AH8015 grade help to maintain edge integrity; choose compatible clamping hardware and replace screws and underplates as specified to secure repeatable performance. For tailored technical advice on Tungaloy SNMG120408 AH8015 turning inserts or to arrange delivery via Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will recommend the optimal grade and chipbreaker for the application Technical data Article number: 6947301 Manufacturer SKU: 6947301-Tungaloy Model series: ISO indexable turning inserts Dimensions & measurable data Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Geometry angle: 90° Relief angle: 0° Materials & features Material: carbide Coating: PVD Grade: AH8015 Chipbreaker: double‑sided Centre hole: cylindrical hole Application: Turning (external and internal) ISO designation: SNMG120408 Insert form: square FAQ What materials is this insert intended for? The SNMG120408 AH8015 insert is specified as a first choice for the general machining of heat‑resistant alloys, offering a balance of wear resistance and edge stability for such materials. Will the SNMG120408 fit my existing SNMG holder? Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the ISO‑standard SNMG120408 form and cylindrical centre hole ensure fit with holders specified for that geometry. What advantage does the PVD coating provide? The PVD coating on the AH8015 grade offers improved resistance to abrasive wear and heat, extending tool life and maintaining cutting‑edge performance in demanding conditions. Is the insert reversible or single‑use per side? The insert is double‑sided, which allows use of both faces; correct indexing and clamping are essential to achieve the intended number of usable cutting edges. Which operations are most suitable for this insert? Designed for external and internal turning, the square SNMG geometry with 90° cutting angle is well suited to shoulder cuts and general turning where robustness and repeatability are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 wear resistance, precise ISO SNMG 120408 geometry and a 0.8 mm corner radius for stable, cost-effective turning of heat-resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for grade and chipbreaker selection. SNMG 120408 AH8015 Tungaloy turning indexable insert The SNMG120408 AH8015 is an ISO-standard turning indexable insert engineered for general external and internal turning of heat‑resistant alloys. PVD-coated carbide grade AH8015 ISO SNMG 120408 geometry, 90° form 0.8 mm corner radius for stable cutting Double-sided insert with cylindrical hole High‑temperature alloy performance with balanced edge stability The SNMG120408 AH8015 is supplied in the AH8015 cutting grade, a PVD-coated cemented carbide designed as a first choice for machining heat‑resistant alloys. The coating provides a barrier against thermal and abrasive wear, while the substrate supports mechanical strength; this combination yields predictable tool life and consistent component tolerances. For production environments where cycle time and part repeatability matter, the balanced mix of wear resistance and edge stability reduces unscheduled insert changes and supports uninterrupted throughput. Geometry and clamping that secure process reliability The square, 90° insert form and the 0.8 mm corner radius deliver a stable cutting edge suitable for a range of turning tasks. The insert is double‑sided and presented with a cylindrical hole, enabling secure clamping and economical indexability. Compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters ensures correct seating and repeatable cutting forces, thereby enhancing surface finish and dimensional control during machining. Chip control and productivity advantages Equipped with a chipbreaker profile tailored to general turning, the insert supports controlled chip formation and evacuation even when cutting difficult alloys. The PVD-coated surface also eases built‑up edge tendencies and improves heat dispersion from the cutting zone. These attributes translate into higher effective productivity: longer intervals between indexings, fewer tool changes and more predictable machining windows. Where batch processing demands consistent output, this insert contributes directly to reduced cycle times and lower unit costs. System setup and recommended applications for efficient use Intended for both external and internal turning, the insert functions as part of a system consisting of an ISO indexable insert, a compatible external holder or boring bar, a shim/underlay, clamp set and replacement screws. For best results, select the chipbreaker and grade to match workpiece material, machining type and machine stability. The geometry and coating make this insert especially suitable when machining high‑temperature alloys that require a compromise between cutting edge robustness and abrasion resistance. For machining heat‑resistant alloys with the Tungaloy AH8015 grade, contact Metav Werkzeuge for application advice, availability and assistance with holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947320 SKU: 6947320-Tungaloy Manufacturer SKU: TUN6947320 Article name: SNMG120408 AH8015 Tungaloy insert Facts Geometry code: 120408 Corner radius: 0.8 mm Relief angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Angle: 90° Special features Material: cemented carbide Coating: PVD (AH8015) Plate form: square Hole: with cylindrical hole Chipbreaker: double-sided Application: turning Series: ISO turning indexable inserts FAQ Which materials are suitable for this insert? The SNMG120408 AH8015 insert from Tungaloy is intended primarily for machining heat‑resistant alloys and other materials where a balance of wear resistance and edge stability is required. Is this insert compatible with standard SNMG holders? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the insert follows the ISO SNMG120408 specification and is designed for standard SNMG clamping systems. How does the AH8015 grade affect tool life? The AH8015 PVD coating improves resistance to thermal and abrasive wear while the carbide substrate maintains edge strength, resulting in longer usable life and more consistent cutting performance under demanding conditions. Can the insert be rotated to use multiple cutting edges? Yes, the square double‑sided design allows indexing to fresh cutting edges, enabling economical use of all available faces for extended service life. What system components are required for correct installation? A suitable external holder or boring bar, a shim/underlay, the correct clamp set and replacement screws are required to assemble the complete system with this insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of balanced wear resistance and edge stability for dependable turning of heat‑resistant alloys; order the SNMG120408 AH8015 insert via Metav Werkzeuge or consult our specialists for selection and availability. SNMG120408 AH8015 Tungaloy insert — ISO turning insert, PVD‑coated carbide, 90° square A SNMG120408 AH8015 Tungaloy insert designed for external and internal turning where a balance of wear resistance and cutting edge stability is required ISO‑standard square insert, 90° geometry PVD‑coated carbide AH8015 grade 0.8 mm corner radius for robust edges Double‑sided chipbreaker with centred hole Reliable cutting performance for heat‑resistant alloys The SNMG120408 AH8015 insert is engineered as an ISO‑standard turning insert for consistent machining of heat‑resistant alloys. The PVD‑coating on the carbide substrate improves wear resistance while maintaining edge strength, which supports longer tool life under elevated temperatures. The square, 90° geometry enables stable cutting forces for both facing and longitudinal turning, and the 0.8 mm corner radius helps to distribute loads at the cutting edge, reducing incidence of premature chipping. For those new to indexable tooling, the PVD finish is a thin, hard layer applied by physical vapour deposition to increase surface hardness without compromising toughness. Simple integration into ISO toolholder systems Compatibility is ensured by ISO conformity: form, relief angle, tolerance class, fastening method, size and thickness determine fitment. The insert’s dimensions (12 mm size, 4.76 mm thickness) and centre hole with cylindrical style allow straightforward mounting in standard external holders or boring bars. The double‑sided chipbreaker provides two usable cutting edges per index, improving economy and reducing changeover frequency. In practice this means quicker re‑indexing and predictable set‑up times, which supports efficient machine timetable planning and reduces operator downtime. Predictable edge life and process stability Choosing the AH8015 grade delivers a compromise between wear resistance and edge stability, aimed at productive turning of tough alloys. The geometry and chip control features are tuned for stable chip formation under varied cutting conditions; this reduces vibration and improves surface finish in one operation. For production environments, this predictability translates to fewer interruptions, more consistent part tolerances and better first‑pass yield. Where higher thermal loads are expected, the PVD layer contributes to performance retention, making this insert a reliable option for mixed‑material batches. Discuss Tungaloy AH8015 inserts with Metav Werkzeuge for tailored recommendations or order directly via Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947291 SKU: 6947291-Tungaloy Manufacturer SKU: TUN6947291 Model series: ISO turning inserts (ISO‑Drehwendeschneidplatten) Grade/coating: AH8015, PVD‑coated carbide Specifications Insert designation: SNMG120408 ISO code: 120408 Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Geometry angle: 90° Hole: with hole, cylindrical hole Chipbreaker: double‑sided Applications and features Application: turning (external and internal turning) Suitable for heat‑resistant alloys Compatible with ISO toolholders by form, relief, tolerance, fastening, size and thickness Material: carbide (Hartmetall) Double‑sided use, square shape FAQ What materials is this insert suitable for? The SNMG120408 AH8015 insert is specified for productive machining of heat‑resistant alloys and is balanced for wear resistance and edge stability. How is chip control achieved with this insert? Chip control is provided by a double‑sided chipbreaker and the insert geometry; the design promotes stable chip formation for improved surface finish and reduced vibration. What does the AH8015 grade signify? AH8015 denotes a PVD‑coated carbide grade optimised as a first choice for general machining of heat‑resistant alloys, offering a compromise between hardness and edge toughness. Is the insert compatible with standard ISO toolholders? Yes, the SNMG120408 conforms to ISO dimensions; compatibility depends on matching form, relief angle, tolerance class, fastening method, size and thickness with the holder. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 AH8015 Wendeplatten - Tungaloy
Take advantage of a PVD-coated AH8015 grade that balances wear resistance and edge stability, combined with a reversible double-sided design for economical turning. Order this indexable insert via Metav Werkzeuge or consult our advisors for application-specific guidance. SNMG 120408 AH8015 turning insert — PVD-coated cemented carbide — Tungaloy SNMG120408 AH8015 is an ISO-format, square indexable insert for general turning applications, optimised for heat‑resistant alloys and stable, repeatable machining. SNMG120408 format, 90° square insert PVD-coated carbide grade AH8015 for alloys 0.8 mm corner radius, 0° clearance angle Double-sided with cylindrical hole for secure clamping Reliable performance for challenging alloys The PVD-coated AH8015 grade provides a balanced combination of wear resistance and edge stability, making it suited to the machining of heat‑resistant alloys where flank wear and thermal loads are critical. As a cemented carbide insert with a robust coating, it sustains cutting forces and thermal cycles better than uncoated grades, leading to longer effective tool life and more consistent component quality. The result is predictable cycle times and fewer unexpected tool changes, which supports higher productivity in production turning. Economical clamping and rapid indexability The square, double‑sided design with a cylindrical hole enables secure clamping in standard ISO toolholders and allows rotation to a fresh cutting edge without immediate replacement. The reversible geometry reduces tooling cost per cutting edge and simplifies inventory management. The insert’s compatibility with holders is determined by its form, free angle, tolerance class, fixation method, size and thickness, so selecting the correct clamp and setting prevents runout and ensures stable cutting conditions. Clear specification for fast setup and safe results Marked as ISO SNMG120408, the insert features a 0.8 mm corner radius and a thickness of 4.76 mm, with an effective inscribed circle size of 12 mm and a 90° cutting angle. The 0° clearance angle suits a range of external and internal turning tasks where rigid setups are available. These measurable parameters support straightforward programming and reproducible setups, helping to reduce setup time and ensure dimensional consistency across batches. Practical benefits for daily workshop use The combination of PVD coating and the AH8015 substrate gives a good compromise between toughness and hardness, suitable when both wear resistance and edge security are required. In practice this means fewer interrupted operations, improved surface finish stability and a lower overall cost per component when machining demanding materials. The standard ISO form also eases replacement and cross‑compatibility with existing holder systems, allowing integration into established production chains with minimal adjustment. For production turning tasks requiring consistent tool life and process reliability with Tungaloy AH8015 inserts, contact Metav Werkzeuge for tailored recommendations and to place an order via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6789035 SKU: 6789035-Tungaloy Manufacturer SKU: TUN6789035 Model series: ISO-Drehwendeschneidplatten Core specifications Insert designation: SNMG120408 Grade/coating: AH8015, PVD-coated Material: Cemented carbide Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle: 12 mm Insert form: square, 90° Free angle: 0° Materials & special features Application: Turning Suitable for heat-resistant alloys Double-sided chipbreaker With cylindrical hole for clamping ISO-compatible insert format Reversible indexable insert for cost efficiency FAQ What materials is this insert best suited for? The SNMG120408 AH8015 insert from Tungaloy is formulated for general machining of heat‑resistant alloys, offering a balance of wear resistance and edge stability suitable for demanding turning operations. How does the double-sided design affect economy? A double‑sided SNMG insert effectively doubles the number of usable cutting edges per insert, improving tooling economy and reducing the frequency of replacements in continuous turning processes. What are the key dimensions to check for holder compatibility? Verify the SNMG120408 form, thickness (4.76 mm), inscribed circle (12 mm), corner radius (0.8 mm) and hole style (cylindrical hole) against the holder’s specifications to ensure correct seating and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide and ISO conformity for consistent turning performance; the balanced AH8015 grade provides wear resistance and edge stability in machining heat‑resistant alloys. Order the SNMG 120408 AH8015 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG 120408 AH8015 indexable insert for Turning — Tungaloy The SNMG 120408 AH8015 is a square indexable turning insert designed for general external and internal turning of heat‑resistant alloys, combining a PVD coating with a stable cutting edge for reliable production use. ISO standard square insert 12 mm PVD-coated carbide, grade AH8015 Double-sided insert with cylindrical hole 0.8 mm corner radius, 4.76 mm thickness Higher throughput through a balanced grade and coating The AH8015 grade is engineered as a first choice for machining heat‑resistant alloys, offering a deliberate balance between wear resistance and edge stability. The PVD coating reduces flank wear and supports higher cutting speeds compared with uncoated grades, which translates into longer tool life and fewer indexings per batch. For production environments where consistent component quality and predictable tool change intervals matter, this combination helps maintain cycle times and reduce unexpected stoppages. Consistent geometry for precise, repeatable turning results Conformity to the ISO plate form ensures straightforward integration with standard holders and boring bars; the square 12 mm shape and 0.8 mm radius deliver controlled cutting forces and a defined surface finish. The insert’s 90° principal cutting angle and 0° free angle suit typical external turning set‑ups, while the double‑sided design and cylindrical hole simplify clamping and spare‑part handling. These geometric properties provide repeatability across batches, reducing set‑up variation and improving first‑pass yield. System compatibility and process advantages in daily workshop use The insert is part of an ISO‑based system: an indexable plate, a compatible external holder or boring bar, a seat/clamp kit and replacement screws. Choosing the correct chipbreaker and grade for the workpiece material and machining stability will reduce built‑up edge and improve swarf control. Practical advantages include fewer tool changes, easier tool inventory management and clearer process planning, all contributing to increased productivity and more efficient shopfloor workflows. Contact Metav Werkzeuge to source genuine Tungaloy SNMG 120408 AH8015 inserts and to receive tailored application guidance for optimised turning results. Technical data Article number: 6741672 SKU: 6741672-Tungaloy Manufacturer SKU: TUN6741672 Manufacturer item no.: 6741672 Model series: ISO turning indexable inserts Material: Carbide Grade/coating: AH8015, PVD-coated Facts Plate size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Principal cutting angle: 90° Free angle (rake): 0° Double-sided insert With hole: cylindrical hole Special features Square plate form ISO conformity for holder compatibility Designed for turning (external & internal) Balanced wear resistance and edge stability Chipbreaker: double-sided Compatibility determined by shape, free angle, tolerance class, fixing, size and thickness FAQ What materials is this insert optimised for? The SNMG 120408 AH8015 insert (Tungaloy grade AH8015) is optimised for machining heat‑resistant alloys, offering a balance between cutting edge stability and wear resistance. Is the insert reversible or single‑use per edge? This SNMG indexable insert is double‑sided, providing two usable edges per side and allowing multiple indexings before disposal. Can the insert be used in standard ISO holders? Yes, the SNMG 120408 conforms to ISO plate formats and is compatible with holders matching the plate shape, size and clamping requirements. How does the PVD coating affect machining performance? The PVD coating enhances surface hardness and wear resistance, supporting stable cutting conditions and extended tool life compared with uncoated grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated cemented carbide grade tuned for heat‑resistant alloys and the universal ISO SNMG geometry for consistent chip control and reduced tool change frequency; order the SNMG120408 AH8015 Tungaloy turning insert via Metav Werkzeuge or consult their specialists for application-specific advice. SNMG 120408 AH8015 turning insert — PVD‑coated carbide, 90° ISO turning (Tungaloy) A SNMG120408 AH8015 ISO indexable turning insert designed for external and internal turning of heat‑resistant alloys, offering robust edge stability and economical double‑sided indexing. PVD‑coated carbide AH8015 for heat‑resistant alloys ISO SNMG120408 geometry for universal holders Double‑sided insert with cylindrical hole for secure clamping Corner radius 0.8 mm for stable cutting edges Proven grade for demanding, heat‑resistant materials The PVD‑coated carbide composition of the AH8015 grade balances wear resistance with cutting‑edge robustness, making it a reliable first choice for the general machining of heat‑resistant alloys. The coating reduces abrasive wear and helps maintain edge integrity at elevated cutting temperatures, which translates into longer intervals between indexing and less unplanned downtime. For shops transitioning from conventional grades, the increased process stability often yields measurable gains in productivity and surface quality. Universal ISO geometry that reduces inventory complexity As an ISO SNMG120408 insert with a quadrilateral form and a 90° included angle, this indexable plate fits a broad range of standard turning holders when matched for form, relief angle and tolerance class. The supplied 0° relief angle and standard dimensions mean compatibility is largely determined by holder type, clamping method and size tolerance. Standardisation across tool holders simplifies tool management and allows faster changeovers, which supports leaner inventory control and smoother production planning. Secure clamping and repeatable cutting performance Mechanical features such as the cylindrical hole and a 4.76 mm thickness provide the necessary stiffness for stable turning operations. The insert’s corner radius 0.8 mm helps maintain a robust cutting edge that resists chipping during interrupted cuts and when machining less stable setups. The double‑sided design ensures multiple usable edges per index, thus reducing the cost per cutting edge while maintaining repeatable positioning once accurately clamped in a compatible holder. Economical indexable solution for productive turning The indexable format delivers clear economic advantages: multiple edges per insert, predictable edge‑life intervals and easier disposal compared with brazed or solid tools. In combination with the AH8015 grade, the result is productive turning with consistent tool life and good surface finish on demanding materials. System setup typically comprises an ISO insert, a matching external holder or boring bar, a support pad/clamping set and replacement screws; ensuring these components are compatible prevents vibration and preserves the insert’s performance over its full service life. Discuss the SNMG120408 AH8015 and tailored holder options with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for application support and availability Technical Data Article number: 6947305-Tungaloy Manufacturer article number: 6947305 Manufacturer SKU: TUN6947305 Model series: ISO-Drehwendeschneidplatten Name: SNMG120408 AH8015 Tungaloy turning insert Facts Included angle: 90° Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Relief angle: 0° Hole: with cylindrical hole Double-sided: yes Special features Coating/grade: AH8015 (PVD) Material: cemented carbide Chipbreaker: double-sided Shape: quadrilateral Application: turning (external and internal) Compatibility: depends on holder form, relief angle, tolerance class, clamping, size and thickness System setup: ISO insert, matching holder/boring bar, support pad/clamping set and replacement screws FAQ Which materials is this insert primarily intended for? The SNMG120408 AH8015 insert is primarily intended for the machining of heat‑resistant alloys; the AH8015 grade provides a balance of wear resistance and edge stability suitable for these materials. How can I check whether this insert fits the intended holder? Compatibility depends on the holder’s form, relief angle, tolerance class, fastening method, size and thickness. Verify these parameters against the SNMG120408 AH8015 specifications (SKU 6947305‑Tungaloy) or consult Metav Werkzeuge for confirmation. How many indexable edges are available on this insert? The insert is double‑sided and quadrilateral, offering multiple indexable edges; the exact usable edge count depends on the chosen clamping orientation and holder design for the SNMG120408 AH8015. What clamping components are required for reliable performance? A secure setup requires a matching external holder or boring bar, an appropriate support pad or clamping set and the correct replacement screws; these elements ensure repeatable positioning of the SNMG120408 AH8015 in the toolholder. Is the AH8015 grade PVD coated and what are the benefits? Yes — AH8015 is a PVD‑coated cemented carbide grade. The PVD layer enhances abrasive wear resistance and helps maintain edge stability, which is particularly beneficial when machining heat‑resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH8015 Wendeplatten - Tungaloy
Combine the PVD‑coated carbide AH8015 grade with a 0.8 mm corner radius and ISO SNMG geometry for dependable turning of heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG120408 AH8015 Tungaloy turning insert — PVD‑coated carbide, 90° square A SNMG120408 AH8015 indexable turning insert engineered for external and internal turning operations, compatible with ISO‑standard holders and intended for heat‑resistant alloys. ISO SNMG shape for standard holders PVD‑coated carbide grade AH8015 Double‑sided with cylindrical hole 0.8 mm corner radius, 90° included angle Consistent edge life for heat‑resistant alloys The SNMG120408 insert combines a PVD‑coated carbide substrate with the AH8015 grade to balance wear resistance and edge stability in the machining of heat‑resistant alloys. The coating and substrate chemistry reduce flank wear at elevated temperatures and permit sustained cutting speeds, which leads to longer tool life and fewer indexings. Where surface finish and repeatability matter, the insert’s geometry and stable cutting edge support consistent dimensional results and predictable tool change intervals. Designed for straightforward holder compatibility and clamping Compatibility with the chosen holder depends on the insert’s form, clearance angle, tolerance class, fastening, size and thickness; the SNMG120408 follows ISO provisions to ensure interchangeability with common external holders and boring bars. The square plate and cylindrical hole enable secure clamping with standard screws and underlays; the 4.76 mm thickness and 12 mm plate size give the rigidity needed for stable turning. This pragmatic design reduces set‑up time and minimises vibration, improving process stability and the quality of the finished component. Practical chip control and economical use The double‑sided chipbreaker layout and reversible configuration make the insert cost‑effective in high‑volume production: two usable cutting edges per side increase the number of indexings before replacement. For general turning, the balanced geometry of the chipformer supports controlled chip flow and reduces the risk of built‑up edge when machining difficult alloys. Selecting AH8015 allows a broad coverage of materials while keeping tool inventory simple — a pragmatic choice for job shops and production lines seeking predictable performance. Contact Metav Werkzeuge for tailored application guidance, request the TUN6789034 specification sheet or order the SNMG120408 insert through Metav Werkzeuge by email or telephone. Technical data Article number: 6789034 SKU: 6789034-Tungaloy Manufacturer SKU: TUN6789034 Model series: ISO‑Drehwendeschneidplatten Material: carbide Grade / coating: AH8015 (PVD) Core data Plate size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 90° Clearance angle: 0° Special features ISO designation: SNMG120408 Square plate form With cylindrical hole Double‑sided chipbreaker PVD‑coated carbide grade AH8015 Application: turning (external and internal) FAQ What materials is this insert suitable for? The SNMG120408 AH8015 insert is optimised for heat‑resistant alloys; the AH8015 PVD coating gives a balance of wear resistance and edge stability for a wide material range. Is the insert reversible and how many cutting edges are available? The SNMG120408 is double‑sided and reversible, providing multiple usable cutting edges per insert to improve economy in production. Which holders are compatible with this ISO insert? ISO‑standard holders that match the SNMG form, size (12 mm), thickness (4.76 mm), hole style (cylindrical) and fastening type are compatible; ensure matching tolerance class and relief angle. What is the purpose of the 0.8 mm corner radius? A 0.8 mm corner radius offers a compromise between edge strength and fine profile control, improving resistance to chipping while maintaining acceptable surface finish in turning. Can the SNMG120408 be used for internal turning? Yes, the geometry and hole style support use in suitable boring bars for internal turning as long as the holder and setup provide adequate rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 AH8015 Wendeplatten - Tungaloy
Take advantage of a PVD-coated AH8015 grade and a 0.8 mm corner radius for stable, repeatable turning of heat‑resistant alloys; the ISO SNMG120408 form with a cylindrical hole ensures secure clamping and simple replacement. Order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific advice. SNMG120408 AH8015 ISO turning insert — PVD-coated carbide, 0.8 mm radius (Tungaloy) SNMG120408 AH8015 is an ISO‑standard square indexable insert developed for external and internal turning of heat‑resistant alloys, offering a balance of wear resistance and edge stability. PVD-coated carbide grade AH8015 0.8 mm corner radius for robust cuts Square SNMG form with cylindrical hole Double-sided insert reduces inventory Consistent cutting performance for heat‑resistant alloys The SNMG120408 AH8015 insert combines a PVD-coated surface with a carbide substrate to deliver a well‑balanced performance between wear resistance and cutting edge stability. The AH8015 grade is tuned as a first choice for machining heat‑resistant and high‑temperature alloys, which means fewer unscheduled tool changes and more predictable cycle times. The PVD layer improves surface hardness and thermal resistance, so the cutting edge retains geometry longer under elevated temperatures, reducing rework and improving cost per part. Easy integration with ISO tooling and secure clamping Designed to the ISO SNMG120408 standard, the insert fits common external holders and boring bars where compatibility depends on shape, relief angle, tolerance class, fastening, size and thickness. The cylindrical hole and square form enable reliable clamping and straightforward indexation. With a plate thickness of 4.76 mm and a compact 12 mm form size, the insert supports quick changeovers and simple stocking strategies, helping to maintain machine uptime and streamline toolroom logistics. Predictable chip control and improved surface finish The insert is double-sided, providing two usable cutting edges per side and lowering tooling costs per edge. The matched chipbreaker geometry allows controlled chip formation; selecting the correct breaker for the material and operation ensures stable cutting and consistent surface quality. The 0.8 mm corner radius is a compromise between edge robustness and finish: it absorbs light interruptions and vibration while still enabling fine surface results in both external and internal turning. Operational efficiency and reliable process security Using a standardised insert grade and form reduces variability across production runs. The combination of a stable substrate and PVD-coated surface lowers tooling expenditure through extended life and reduced change frequency, contributing to predictable machining costs. Backed by Tungaloy’s engineering focus on practical, repeatable cutting performance, the insert supports an efficient workflow and dependable component quality in batch or continuous production. Contact Metav Werkzeuge for tailored machining recommendations or to reserve Tungaloy SNMG120408 AH8015 inserts — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical Data Article number: 6947311 SKU: 6947311-Tungaloy Manufacturer SKU: TUN6947311 Model series: ISO-Drehwendeschneidplatten Designation: SNMG120408 AH8015 Tungaloy-Wendeplatte Manufacturer: Tungaloy Dimensions & core data Corner radius: 0.8 mm Cutting angle: 90° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Hole: cylindrical hole Double-sided chipbreaker Materials & features Material: carbide Coating: PVD Grade: AH8015 Plate shape: square Application: turning (external and internal) Chipbreaker: double-sided Compatibility: ISO-standard insert; compatibility determined by form, free angle, tolerance class, fastening, size and thickness FAQ Is this insert suitable for machining heat‑resistant alloys? The SNMG120408 AH8015 insert is specifically formulated as a first choice for heat‑resistant alloys; the PVD coating and AH8015 grade provide a balance of wear resistance and edge stability for such materials. What are the key dimensional features to check before fitting? Check the SNMG120408 form factor, 0° relief, 4.76 mm plate thickness and the cylindrical hole for compatibility with the chosen holder and clamping system. Can the insert be indexed to use multiple cutting edges? Yes, the insert is double‑sided, allowing use of multiple cutting edges to extend life per insert and reduce tooling costs. Which operations are recommended for this insert? Designed for both external and internal turning, this insert performs well when chipbreaker and grade are matched to the workpiece material and process stability. How should the chipbreaker and grade be selected? Select the chipbreaker and AH8015 grade based on the workpiece material, cutting parameters and rigidity of the setup to achieve optimal chip control and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced combination of PVD‑coated AH8015 carbide and a 0.8 mm nose radius for reliable turning of heat‑resistant alloys; compatibility with ISO SNMG holders ensures straightforward integration into existing tool systems. Order via Metav Werkzeuge or contact our consultants for application support. SNMG120408 AH8015 Tungaloy insert — ISO SNMG square turning insert, 90° geometry, 0.8 mm radius The SNMG120408 AH8015 is an ISO‑standard square turning insert designed for external and internal turning applications on heat‑resistant alloys and similar materials. ISO‑standard SNMG geometry PVD‑coated carbide AH8015 grade 0.8 mm nose radius for stable cutting Double‑sided with cylindrical hole High‑performance grade for heat‑resistant alloys The combination of a PVD‑coated surface and the AH8015 carbide formulation gives a measured balance between wear resistance and edge stability, making the insert suited to continuous and interrupted turning of heat‑resistant alloys. The coating improves resistance to abrasive and adhesive wear at elevated temperatures, which translates into longer productive cutting lengths and more predictable tool life. This performance advantage supports higher metal removal rates without compromising component surface quality. ISO compatibility and geometry for straightforward integration The SNMG form is an established, ISO‑standard geometry that fits a broad range of external holders and boring bars when matching shape, relief, tolerance class, fastening, size and thickness. The SNMG120408 designation denotes the square outline with a 12 mm nominal size and a plate thickness of 4.76 mm, while the insert features a cylindrical hole and a 0° relief angle, enabling secure clamping and consistent seating. When selecting a holder, confirm these parameters to ensure repeatable clamping and optimal cutting geometry. Productivity gains through stable chip control and indexing A double‑sided insert reduces tooling cost per cutting edge and supports quick indexing to present a fresh edge. The integrated chipbreaker should be matched to workpiece material and cutting conditions; the correct chipformer reduces cutting forces, improves chip evacuation and enhances the resulting surface finish. The balanced character of this grade helps deliver consistent machining results, increased productivity and less frequent tool changes in medium‑to‑heavy turning operations. Practical system considerations and handling This insert forms part of a complete turning system comprising the ISO‑standard insert, a suitable external holder or boring bar, a shim/clamping set and replacement screws. The 0.8 mm radius produces a robust cutting edge suited to general turning tasks where edge strength and finish are both priorities. For best results, select the appropriate chipbreaker and match the AH8015 grade to the workpiece alloy and operational stability; the combination ensures reliable performance in both continuous and interrupted cuts. For application assistance or to secure Tungaloy SNMG120408 AH8015 inserts for heat‑resistant turning tasks, contact Metav Werkzeuge for tailored advice and prompt supply via info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: 6947283 SKU: 6947283-Tungaloy Manufacturer SKU: TUN6947283 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Description: SNMG120408 AH8015 Tungaloy‑wendeplatte Core dimensions Size: 12 mm Plate thickness: 4.76 mm Nose radius: 0.8 mm Angle: 90° Relief (free) angle: 0° Materials & special features Grade/coating: AH8015, PVD‑coated carbide Insert form: square (SNMG) Hole: with hole, cylindrical hole Chipbreaker: double‑sided Application: Turning FAQ What materials is this insert suitable for? The SNMG120408 AH8015 insert is optimised for heat‑resistant alloys and similar materials; the AH8015 grade balances wear resistance and edge robustness for reliable turning results. Is the insert indexable and economical to use? Yes — the insert is double‑sided, allowing rotation to fresh cutting edges and reducing tooling cost per effective edge. What is the nose radius and how does it affect machining? The nose radius is 0.8 mm, offering a strong edge that improves tool life and supports a good balance between surface finish and edge stability. Which holders are compatible with this SNMG insert? Compatibility is determined by matching the insert form, relief angle, tolerance class, fastening, size and thickness; ISO‑standard SNMG holders designed for the listed dimensions will accept this insert. How does the AH8015 grade perform compared with other grades? AH8015 is a PVD‑coated carbide grade intended as a first choice for general machining of heat‑resistant alloys, providing an even compromise between wear resistance and cutting‑edge stability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH8015 carbide, a 0.8 mm corner radius and ISO conformity for stable, repeatable turning performance — order the SNMG120408 AH8015 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG 120408 AH8015 – ISO turning insert by Tungaloy, PVD-coated carbide SNMG 120408 AH8015 is an ISO‑standard indexable insert for external and internal turning, designed for reliable machining of heat‑resistant alloys. PVD-coated carbide grade AH8015 ISO SNMG120408, square 90° geometry Double-sided chipbreaker, secure cylindrical hole 0.8 mm corner radius for stable cutting edge Consistent performance with PVD-coated carbide The PVD-coated AH8015 grade combines wear resistance and edge stability to deliver consistent results when machining heat‑resistant alloys. The coating increases thermal and abrasive resistance, which supports longer tool life under elevated cutting temperatures. For general turning operations, this balance between hardness and toughness reduces the frequency of insert changes and helps maintain component tolerances without sacrificing surface quality. ISO conformity and predictable holder compatibility As an ISO SNMG120408 plate, the insert fits standard square holders when the holder’s form, relief angle, tolerance class, fastening method, size and plate thickness match. The ISO designation simplifies procurement and toolroom logistics, while the clear indication of geometry and fit promotes predictable set‑up times. Where clamping accuracy and clearance angles are controlled, the result is repeatable tool position and reduced set‑up variability. Edge geometry engineered for stability and surface quality The square form with a 90° included angle and a 0.8 mm corner radius provides a robust cutting edge that supports medium to heavy roughing as well as finishing passes, depending on the cutting data. The double‑sided chipbreaker design helps control chip formation across a range of feeds, improving evacuation and reducing the risk of built‑up edge on difficult alloys. Together, these features contribute to a consistent surface finish and fewer reworks. Practical benefits for workshop productivity With a plate thickness of 4.76 mm and a cylindrical hole for secure fastening, the insert is straightforward to index and reuse, reducing downtime. The combination of square geometry and a PVD carbide substrate enables broad material coverage while simplifying inventory: one insert type addresses multiple turning tasks. For production environments seeking stable process windows and lower tooling costs per component, the design supports higher productivity and predictable component quality. Consult Metav Werkzeuge for tailored selection advice on the Tungaloy SNMG 120408 AH8015 turning inserts, or request further technical data and cutting parameters from info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6947329 Manufacturer SKU: TUN6947329 SKU: 6947329-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: SNMG120408 AH8015 Core dimensions Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 90° Relief angle: 0° Hole: with cylindrical hole Special features Material: carbide (Hartmetall) Coating/grade: AH8015 (PVD) Shape: square Chipbreaker: double‑sided Typical application: turning Compatibility determined by holder form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The SNMG 120408 AH8015 insert is optimised for machining heat‑resistant alloys thanks to the PVD‑coated AH8015 carbide, offering a balance of wear resistance and edge strength. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius improves edge robustness and allows stable cutting under variable loads, helping to extend insert life while maintaining acceptable surface quality. Is this insert compatible with standard SNMG holders? Yes, the ISO SNMG120408 designation indicates compatibility with standard holders, provided the holder’s form, relief angle, tolerance class, fastening and thickness match the insert specifications. Can the insert be indexed to present a fresh cutting edge? The square form and double‑sided chipbreaker permit indexing to further cutting edges, enabling efficient reuse and reducing tooling change intervals. What fastening type does the plate require? The insert features a cylindrical hole for secure clamping; correct fastening is essential to achieve the ISO‑specified positional stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced wear resistance of the PVD-coated AH8015 grade and the robust 0.8 mm corner radius in the ISO SNMG120408 format; order directly via Metav Werkzeuge or consult our specialists for application advice. SNMG120408 AH8015 Tungaloy — ISO turning insert for heat-resistant alloys The SNMG120408 AH8015 is a square ISO turning insert designed for external and internal turning of heat-resistant alloys, offering a stable cutting edge and reliable chip control. SNMG120408 ISO square insert for turning PVD-coated carbide grade AH8015 for alloys Double-sided chipbreaker for stable chips 0.8 mm corner radius, 90° cutting geometry Reliable cutting performance for heat-resistant alloys The PVD-coated AH8015 carbide grade combines wear resistance and edge stability to deliver predictable tool life when machining heat-resistant materials. This grade is selected for its balanced properties, reducing unexpected tool changes and supporting a steady production rhythm. The insert’s PVD coating increases resistance to oxidation at elevated cutting temperatures, which benefits process stability and minimises thermal edge degradation during longer or rougher passes. Stable chip control and secure clamping for consistent results A double-sided chipbreaker and indexable design enable repeatable chip formation and efficient evacuation, which improves surface finish and reduces risk of built-up edge. The insert’s compatibility with holders is determined by shape, clearance angle, tolerance class, fastening, size and thickness; matching these parameters to the toolholder ensures secure clamping and consistent cutting performance. The cylindrical hole and the standard 90° cutting geometry contribute to reliable seat location and predictable cutting forces in turning applications. ISO interchangeability and economical machining As an ISO standard insert with 4.76 mm thickness and a square form, the component is easy to replace and index, supporting quick changeovers and reduced downtime. The 0.8 mm corner radius provides a robust edge for moderate depth-of-cut operations while still allowing acceptable surface quality. System integration is straightforward: the insert works within the common system setup of insert, compatible outer holder or boring bar, shim/clamping set and replacement screws, enabling pragmatic retrofitting into existing toolsets and promoting economical, productive machining. For focused machining of heat-resistant alloys, choose the Tungaloy AH8015 insert and contact Metav Werkzeuge for tailored holder recommendations and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the SNMG120408 Tungaloy solution. Technical Data Article number: 6741676 Manufacturer SKU: TUN6741676 Our SKU: 6741676-Tungaloy Model series: ISO-Drehwendeschneidplatten Grade: AH8015 Core dimensions Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 90° Clearance angle: 0° Mounting: with hole (cylindrical) Features Material: carbide Coating: PVD Chipbreaker: double-sided Insert shape: square Hole style: cylindrical hole Suitable for: turning, external and internal turning System components: insert, holder, shim/clamping set, replacement screws FAQ What materials is this insert best suited for? The SNMG120408 AH8015 Tungaloy insert is formulated for machining heat-resistant alloys and other demanding materials where a balance of wear resistance and edge stability is required. How does the AH8015 grade benefit production? AH8015, as a PVD-coated carbide, provides extended resistance to elevated temperatures and wear, which helps the Tungaloy insert maintain dimensional stability and reduce unexpected tool changes during continuous operation. Can the SNMG120408 be used in existing ISO holders? Yes — the SNMG120408 conforms to ISO dimensions; compatibility depends on matching the holder by form, clearance angle, tolerance class, fastening, size and thickness to ensure secure clamping and correct seat location. What advantages does the double-sided chipbreaker provide? The double-sided chipbreaker on this insert promotes stable chip formation and easier evacuation, improving surface finish and reducing the likelihood of chip-related interruptions in turning operations. How many indexable edges does the insert offer and what is the effect on costs? As a square, indexable insert with a double-sided design, the SNMG120408 AH8015 Tungaloy insert offers multiple usable cutting edges, enabling indexation and extending tool life, which supports lower tooling costs per component over time. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 AH905 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide grade AH905, a precise 0.8 mm corner radius and an ISO‑standard form for reliable turning performance. Order the insert via Metav Werkzeuge or consult our advisors for application-specific recommendations. SNMG120408 AH905 SNMG turning insert for Drehen by Tungaloy SNMG120408 AH905 Tungaloy insert is an ISO‑standard square turning insert designed for external and internal turning, offering a sharp cutting edge and high process security. PVD‑coated carbide grade AH905 for wear resistance 0.8 mm corner radius for accurate edge profiling Double‑sided chipbreaker for versatile turning Square 12 mm size, cylindrical hole, 90° orientation High wear resistance and consistent cut quality for heavy use The AH905 grade is a PVD‑coated carbide designed to deliver wear resistance and resistance to edge breakout under continuous production conditions. The coating reduces friction and thermal load at the cutting edge, so the insert keeps a sharp cutting geometry for longer periods. In practical terms, this improves dimensional stability and lowers the frequency of tool changes, which contributes to predictable cycle times and reduced process downtime. Clear guidance on holder compatibility and secure clamping These inserts conform to ISO dimensions; compatibility with a turning holder is therefore determined by the insert form, relief angle, tolerance class, fastening method, size and thickness. The plate features a cylindrical hole and a 0° relief, so it is intended for holders that accept ISO SNMG plates with a central locating pin or screw. The double‑sided chipbreaker and square format allow two indexed cutting edges per side, and the system should be clamped with the correct torque to ensure repeatable seating and stable cutting forces. Practical productivity improvements from insert geometry A 0.8 mm corner radius is suited to finishing and light to medium roughing where close profile control and surface finish matter. The square 12 mm plate offers a robust contact area, and the double‑sided configuration effectively doubles the number of usable edges compared with single‑edged alternatives, improving tool‑cost efficiency. Stable chip formation and the matched chipbreaker geometry reduce rework and typically permit higher feed rates or longer uninterrupted runs when matched to appropriate process parameters. Contact Metav Werkzeuge for tailored advice on selecting the Tungaloy SNMG120408 AH905 insert for high process security — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6859301-Tungaloy Manufacturer item number: 6859301 Manufacturer SKU: TUN6859301 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Numbers / Core technical data ISO designation: SNMG120408 Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Angle: 90° Designs / Special features Grade: AH905 (PVD‑coated carbide) Double‑sided chipbreaker Square plate with cylindrical hole For external and internal turning applications FAQ What materials is this insert designed to machine? The SNMG120408 AH905 insert is a PVD‑coated carbide grade optimised for robust performance across a wide range of steels and common engineering materials; select the chipbreaker and cutting data to match the specific workpiece material. How many cutting edges are available per insert? Due to the square, double‑sided design of the SNMG120408 AH905 turning insert, multiple indexings are possible, which increases the number of usable edges and improves cost efficiency. Which holder type is required for this ISO insert? The insert requires an ISO SNMG‑compatible holder with a locating feature for a cylindrical hole and suitable clamping for plates with a 4.76 mm thickness and 0° relief. Can the AH905 grade be used for interrupted cuts? The AH905 PVD‑coated carbide grade is designed to be resistant to wear and edge breakout, making it suitable for many interrupted‑cut scenarios when combined with appropriate cutting parameters. How does the 0.8 mm corner radius affect surface finish? A 0.8 mm corner radius provides a balance between strength and surface finish: it supports accurate profile control and a good surface quality while maintaining edge robustness for longer tool life. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise surface finish, predictable wear and broad holder compatibility for reliable finishing and light turning of steel. Order the inserts directly via Metav Werkzeuge or consult our specialists for holder matching and application advice. SNMG120408 AT9530 – Tungaloy indexable insert for turning, coated cermet, 0.8 mm radius A SNMG120408 AT9530 indexable insert designed for precision external and internal turning, optimised for finishing steel components. ISO SNMG form for wide holder compatibility Coated cermet AT9530 for superior surface finish 0.8 mm corner radius for fine surface quality Cylindrical hole, double-sided chipbreaker Consistent surface quality for finishing operations The insert’s AT9530 grade is a coated cermet formulated for finishing and light machining of steel, delivering uniform wear and excellent microfinish. The combination of substrate and coating promotes stable cutting-edge behaviour, which helps reduce rework and downstream polishing. By selecting a fine 0.8 mm radius, the geometry supports tighter corner rounding and improved part appearance without sacrificing edge stability. For shops aiming for repeatable surface results, this geometry and grade reduce the need for secondary operations and help maintain dimensional tolerances. Flexible compatibility and straightforward mounting As an ISO SNMG-format insert with a cylindrical hole, the geometry ensures compatibility with a wide range of external holders and boring bars when the form, relief angle and thickness match. The insert thickness of 4.76 mm and the square plate form require a holder that accepts SNMG plates and the specified tolerance class. Correct selection of the clamping set and replacement screws is essential for secure seating and repeatable cutting performance. If holder matching or tolerance checks are required, Metav Werkzeuge offers application advice to confirm the correct tool assembly. Effective chip control and longer tool life The double-sided chipbreaker integrated into the plate supports predictable chip formation during finishing cuts, aiding swarf evacuation and machine cleanliness. Combined with the cemented carbide substrate and coating, the insert balances wear resistance with edge sharpness for longer productive life in low-to-medium cutting conditions. These attributes contribute to fewer index changes per part batch and a smoother production flow, improving throughput without compromising surface integrity. Application guidance and support for process reliability This insert is intended primarily for turning applications where surface quality and even edge wear are priorities. Typical system setup includes an SNMG plate, a compatible external holder or boring bar, and the appropriate underlay/clamping kit. Because compatibility is determined by plate form, relief angle, tolerance class, fastening method, size and thickness, it is advisable to verify holder specifics before purchase. If additional technical data or application tests are required, Metav Werkzeuge can assist with cutting parameter recommendations and tool-life expectations; contact via info@metav-werkzeuge.com or call +49 2822 7131930. For precision finishing of steel components with the AT9530 grade, contact Metav Werkzeuge to confirm holder compatibility and secure the correct SNMG120408 geometry for your process Technical Data Article number: 6773701 Manufacturer SKU: TUN6773701 Label: SNMG120408 AT9530 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Grade: AT9530 Application: turning Dimensions / Core Data Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 12 mm Relief angle: 0° Main angle: 90° Features / Compatibility ISO SNMG120408 form Coated cermet grade for finishing and light machining Cylindrical hole Double-sided chipbreaker Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness System composition: insert, external holder or boring bar, underlay/clamping set and replacement screws FAQ What materials is the insert suitable for? The AT9530 grade is formulated for finishing and light machining of steel and produces consistent surface quality when used in appropriate cutting conditions. How does the chipbreaker affect machining? The double-sided chipbreaker on the SNMG120408 insert promotes controlled chip formation and evacuation, assisting surface finish and machine cleanliness during finishing operations. Which holders fit this insert? Holders compatible with the ISO SNMG form that accept a 12 mm square plate and a 4.76 mm thickness are suitable; correct matching depends on form, relief angle and tolerance class. Is this plate indexable on both sides? Yes, the plate is double-sided; reversing the insert provides an additional index for continued usage before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com