SNMG 120404 T6215 Wendeplatten - Tungaloy
Combining CVD-coated carbide T6215 and the ISO SNMG120404 form delivers a cost-effective, wear-resistant solution for turning rostfreien Stahl under stable to slightly interrupted conditions; the double-sided design and cylindrical fixing hole ensure predictable seating and reduced tooling changeover. Order the SNMG120404 T6215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG 120404 T6215 ISO turning insert by Tungaloy — CVD-coated carbide, 90° geometry A SNMG120404 T6215 insert designed for ISO-standard external and internal turning, optimised for rostfreien Stahl machining with a 90° approach and reliable chip control. ISO SNMG120404 format, 90° geometry CVD-coated carbide grade T6215 for wear resistance Double-sided insert with cylindrical fixing hole 12 mm square size, 4.76 mm thickness Reliable cutting performance for rostfreien Stahl The CVD-coated carbide grade T6215 provides consistent wear resistance and thermal stability, making it suitable for prolonged turning operations on rostfreien Stahl where edge retention is essential. The coating supports elevated cutting speeds while helping to maintain surface finish, so cycle times can be reduced without compromising component quality. By choosing an insert with a proven coating and substrate combination, machining runs become more predictable and tool changes less frequent, improving overall process efficiency. Precise fit and system compatibility for secure clamping Adhering to the ISO designation ensures compatibility with a wide range of holders; the square 12 mm format and 4.76 mm thickness match standard toolholder pockets and clamping kits. The insert features a cylindrical hole and a 90° main cutting edge geometry, which together deliver secure mounting and repeatable positioning. These mechanical characteristics reduce vibration and help maintain consistent chip formation, particularly important when integrating the insert into existing turning systems or when replacing inserts during scheduled maintenance. Controlled chip formation and predictable tool life The double-sided chipbreaker and the specified corner radius 0.4 mm focus on dependable chip control and surface quality in steady cutting conditions. The CVD layer on the cemented carbide substrate enhances resistance to adhesion and built-up edge on rostfreien Stahl, which translates into longer intervals between indexings and lower tooling consumption. When combined with the correct holder and machining parameters, the insert supports reproducible finishes and contributes to improved productivity across serial production or batch runs. Discuss specific machining parameters and compatibility with Metav Werkzeuge to ensure the SNMG120404 T6215 Tungaloy insert meets production requirements and to receive tailored recommendations from our consultants — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6875605 Manufacturer SKU: TUN6875605 Supplier SKU: 6875605-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Geometry angle: 90° Hole: with cylindrical hole Special features Material: carbide (Hartmetall) Coating: CVD, grade T6215 Application: Turning (external and internal) Chipbreaker: double-sided Plate form: square Suitable for rostfreien Stahl FAQ What materials is this insert optimised for? The SNMG120404 T6215 Tungaloy insert is optimised for machining rostfreien Stahl under stable to slightly interrupted cutting conditions. How does the CVD coating affect performance? The CVD-coated carbide substrate of the T6215 grade increases thermal and wear resistance, helping the insert maintain edge life and surface quality during extended turning operations. Is the insert compatible with standard ISO holders? Yes, the SNMG120404 follows ISO dimensions for SNMG inserts and uses a cylindrical fixing hole, enabling compatibility with matching ISO toolholders and clamping kits. What chip control can be expected from the double-sided design? The double-sided chipbreaker and 0.4 mm corner radius provide controlled chip formation and stable surface finishes when set up with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, stable chip control and ISO compatibility for reliable, high-volume turning operations; order the insert via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNMG 120404 T9215 indexable turning insert by Tungaloy — CVD-coated carbide for medium steel, square 12 mm SNMG 120404 T9215 is an ISO‑format indexable turning insert designed for general turning. Its geometry and tolerances ensure compatibility with standard external holders and boring bars while the T9215 grade provides a balance of wear resistance and fracture toughness for productive machining. ISO-standard SNMG insert, square 12 mm CVD-coated carbide grade T9215 for steel Double-sided chipbreaker for stable chips 0.4 mm corner radius, 4.76 mm thickness High productivity through optimised wear resistance The CVD‑coated carbide T9215 delivers a predictable wear pattern that supports uninterrupted production runs and higher machining speeds in medium steel applications. Thanks to its engineered coating and substrate combination, the grade offers both abrasion resistance and edge stability, which reduces insert changes and keeps cycle times consistent. This results in improved machine utilisation and lower per-part tooling cost, a clear advantage for batch production and continuous turning operations. Reliable fit and ISO conformity for safe integration As an ISO-standard SNMG120404 insert, compatibility with holders is determined by shape, relief angle, tolerance class and thickness; this ensures repeatable clamping and accurate seating in standard carriers. The square, 12 mm form and 4.76 mm thickness make the insert straightforward to match with common external holders or boring bars, simplifying tool inventory and setup. Clear adherence to ISO norms reduces the risk of misfit and supports quick indexation during runtime. Consistent chip control and edge robustness The double-sided chipbreaker and the 0.4 mm corner radius combine to deliver controlled chip formation and improved surface integrity on medium steel workpieces. The cylindrical hole and secure attachment reduce vibration at the cutting edge, which enhances edge life and surface quality under continuous to lightly interrupted cuts. These features make the insert especially suitable where stable chip evacuation and repeatable finish are required. Efficient system workflow and application flexibility The insert is intended as part of a tooling system comprising the indexable plate, matching external holder or boring bar, and retaining hardware; this modular approach supports rapid replacement and reduces machine downtime. Selection of the correct chipbreaker and grade for the workpiece and cutting conditions enables tailored performance—whether for finishing or productive roughing—so workshops can adapt the same geometry across multiple jobs while keeping stocking and handling minimal. For detailed cutting parameters or to request samples of the Tungaloy SNMG120404 T9215 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, application‑specific advice and supply options Technical data Article number: 6944747 Manufacturer SKU: TUN6944747 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy WPL designation: SNMG120404 Name: SNMG120404 T9215 Tungaloy insert Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Main angle: 90° Special features Material: carbide Coating: CVD-coated Grade: T9215 Chipbreaker: double-sided Hole: with cylindrical hole Plate form: square Application: Turning Typical use: medium steel, continuous to light interrupted cuts FAQ What materials is this insert best suited for? The Tungaloy SNMG120404 T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade T9215 balances wear resistance and fracture toughness for productive turning. How is the SNMG120404 secured in the holder? The insert uses a central cylindrical hole and standard ISO geometry for secure clamping in compatible external holders or boring bars; correct seating depends on form, tolerance class and thickness. Can the insert be indexed to present a fresh cutting edge? Yes, the SNMG120404 is double‑sided, allowing indexation to a fresh edge which extends usable life and reduces tooling costs in batch production. Is this insert suitable for interrupted cuts? The T9215 grade provides good toughness for light to moderate interrupted cuts; heavier interruptions may require a lower‑risk geometry or cutting strategy. What edge preparation does the 0.4 mm radius provide? A 0.4 mm corner radius helps to distribute cutting forces and improves surface finish on turning operations while maintaining edge strength for general‑purpose applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, stable chip control and ISO compatibility for smooth, productive turning operations. Order the insert directly via Metav Werkzeuge or contact our technical advisors for application-specific guidance. SNMG 120404 T9215 indexable turning insert by Tungaloy — 0.4 mm radius, ISO SNMG 120404 The SNMG120404 T9215 is an ISO‑standard indexable insert designed for external and internal turning of medium steels, offering a balance of wear resistance and fracture toughness for high productivity. CVD-coated carbide grade T9215 0.4 mm corner radius for versatility Double-sided chipbreaker for stability ISO SNMG 120404 format with cylindrical hole Reliable wear resistance for productive turning The CVD‑coated carbide substrate of this grade delivers high wear resistance while retaining sufficient toughness for routine shop use. The T9215 composition is tailored for medium steel machining and is rated for continuous to slightly interrupted cuts, which supports longer cutting intervals and a predictable tool life. These characteristics translate directly into fewer insert changes and improved process efficiency on series production runs. Consistent chip control to reduce interruptions A double-sided chipbreaker is incorporated to give controlled chip formation across a range of cutting conditions, improving surface quality and reducing the risk of chip‑related downtime. Effective chip control reduces the need for manual intervention at the machine, contributes to safer operation and helps maintain consistent cycle times, particularly when machining parts that demand repeatable surface finish and dimension stability. Precise fit and secure clamping for dimensional stability The insert is supplied in the ISO SNMG 120404 format with a cylindrical hole, enabling secure fastening in compatible holders. Compatibility with a given holder is determined by insert shape, relief angle, tolerance class, fastening method, size and thickness — all factors that ensure a stable cutting edge position and repeatable results. The 0° relief angle and square form contribute to predictable cutting geometry and ease of indexing. Practical selection for everyday workshop productivity With a 0.4 mm corner radius and a plate thickness of 4.76 mm, this insert suits a wide range of turning tasks where a balance between edge strength and detail is required. The system approach — an ISO insert plus a matching external holder or boring bar, a shim/clamp set and spare screws — simplifies inventory and replacement. For routine turning of shafts, faces and shoulder operations in medium‑strength steels, this insert offers a pragmatic combination of performance and robustness. For targeted medium‑steel turning tasks, request the Tungaloy SNMG120404 T9215 indexable insert from Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 for tailored recommendations Technical data Article number: 6773877 Manufacturer SKU: TUN6773877 SKU: 6773877-Tungaloy Brand: Tungaloy Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 90° Special features Substrate: carbide Coating: CVD Grade: T9215 Chipbreaker: double-sided Hole: cylindrical hole (with hole) Shape: square (SNMG) Series: ISO turning indexable inserts Application: turning (external and internal) FAQ Which materials is this insert best suited for? The Tungaloy SNMG120404 T9215 insert is optimised for medium steel applications; the T9215 grade combines wear resistance with fracture toughness for continuous to slightly interrupted cuts. Is the SNMG120404 compatible with standard SNMG holders? Compatibility depends on holder form, relief angle and tolerance class; the SNMG120404 format and cylindrical hole are standard for many SNMG holders, but matching by holder specification is recommended. What cutting conditions are appropriate for this grade? The T9215 grade is intended for productive turning at moderate to high cutting speeds in medium steels, favouring continuous to slightly interrupted cuts where both wear resistance and toughness are needed. How does the 0.4 mm corner radius affect performance? A 0.4 mm radius offers a compromise between edge strength and the ability to produce defined contours; it improves robustness over finer radii while still permitting reasonable surface finish quality. Can the insert handle light interruptions or unstable setups? Yes — the T9215 grade’s balanced toughness provides resistance to breakage under light interruptions, and the double-sided chipbreaker helps maintain stable cutting behaviour in marginally interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated T9215 grade and a double-sided SNMG geometry for reliable productivity in medium-steel turning; compatibility with ISO holders ensures straightforward integration into existing tool systems. Order the insert directly via Metav Werkzeuge or consult Metav Werkzeuge's advisors for application matching. SNMG 120404 T9215 square turning insert, CVD‑coated – Tungaloy The SNMG120404 T9215 is a square, double-sided indexable insert engineered for turning applications in medium steel, offering a robust balance of wear resistance and fracture toughness for continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 Double-sided square insert for cost efficiency 12 mm size with 0.4 mm corner radius Cylindrical hole and 0° relief angle Delivering sustained productivity through material and coating The combination of a CVD-coated surface and the T9215 cutting grade provides notable wear resistance while maintaining sufficient toughness to resist edge chipping. For medium-steel turning, this balance translates into longer tool life and predictable performance under sustained use. The coating reduces flank wear and improves thermal stability, which supports higher feed or slightly increased cutting speeds without sacrificing surface integrity. This results in fewer tool changes and more consistent cycle times on production batches. Secure geometry for reliable clamping and repeatable results A square 12 mm insert form with a cylindrical hole and defined 0° relief angle ensures stable clamping and precise seating in ISO‑compliant holders. The 4.76 mm thickness contributes to rigidity at the cutting edge, reducing vibration and improving dimensional repeatability. Compatibility with standard holder geometries is determined by form, relief angle, tolerance class, fastening method, size and thickness, which allows this insert to be indexed conveniently and keeps machine downtime to a minimum when re‑setting tools. Controlled chip formation and improved surface finish The double-sided chipbreaker geometry combined with a corner radius 0.4 mm supports consistent chip control and helps achieve high-quality surface finishes with reduced risk of built-up edge. A moderate corner radius provides a compromise between strength and fine finish: it increases edge robustness for interrupted cuts while still permitting finer feeds for superior surface results. As a consequence, secondary finishing operations can be reduced, saving time and costs in downstream processes. Practical integration and economical use in production workflows As a reversible, double-sided insert, this component offers two usable cutting edges per side, improving cost-efficiency per edge and simplifying inventory management. The insert forms part of an ISO‑based system comprising the insert, a matching external holder or boring bar, a shim/clamp set and spare screws; using standardised components eases procurement and replacement. In production, the combination of indexable insert design and the T9215 grade supports steady throughput with predictable tool-change intervals, making process planning more straightforward. Contact Metav Werkzeuge for tailor-made application advice on Tungaloy turning inserts or to arrange supply of SNMG 120404 T9215; email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed consultation and stock information. Technical Data Article number: 6774109 Manufacturer SKU: TUN6774109 Item SKU: 6774109-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: SNMG120404 T9215 Tungaloy insert Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief/clearance angle: 0° Included hole: cylindrical hole Insert shape: square Feature: double-sided Special features Coating / grade: T9215 Base material: carbide (CVD-coated) Typical application: turning (external and internal) Chipbreaker: double-sided Compatibility: ISO insert system; suitability depends on holder form, relief angle, tolerance class, fastening, size and thickness Best suited for: medium-steel machining; continuous to slightly interrupted cuts FAQ Which holder types are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the SNMG120404 T9215 fits ISO-compatible external holders and boring bars designed for square SNMG inserts. Is this insert suitable for interrupted cuts? Yes, the T9215 grade offers a balance of wear resistance and fracture toughness suited to continuous and slightly interrupted cuts in medium steel applications. How does the corner radius affect machining results? A 0.4 mm corner radius increases edge strength and helps maintain surface quality; it is a compromise between robustness for interrupted cuts and the ability to achieve fine surface finishes. How many cutting edges are available per insert? The double-sided square design provides multiple indexing positions; the exact number of usable cutting edges depends on orientation and wear, enabling economical edge usage. What materials is the insert best suited for? This CVD-coated carbide grade is optimised for medium-steel machining and delivers consistent performance when paired with appropriate chipbreaker and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of stable cutting performance and broad material suitability to maintain a reliable production pace; the T9215 CVD-coated grade and the double-sided chipbreaker deliver wear resistance and predictable chip control. Order the SNMG120404 insert directly via Metav Werkzeuge or consult the Metav team for application advice. SNMG 120404 T9215 SNMG turning insert by Tungaloy (CVD-coated carbide, 0.4 mm radius) SNMG120404 T9215 is an ISO-compliant square turning insert for external and internal turning, designed for productive medium-steel machining CVD-coated carbide for long tool life Double-sided chipbreaker for reliable chip control 0.4 mm corner radius for versatile finishing ISO SNMG120404 square insert with cylindrical hole Extended productivity for medium-steel turning The CVD-coated carbide grade T9215 is engineered for high wear resistance while preserving fracture toughness, making it a reliable choice for continuous and light interrupted cutting. This combination reduces unplanned tool changes and helps maintain a steady production rhythm, which in turn supports higher throughput and lower per-part tooling costs. Practical benefits include longer intervals between regrinds and more consistent component tolerances, particularly when machining common construction and engineering steels. Predictable chip control and surface quality A double-sided chipbreaker integrated into the geometry ensures controlled fragmentation of chips across a range of cutting depths and feed rates, reducing rework and improving swarf evacuation. The 0.4 mm corner radius supports a balance between edge strength and surface finish; small radii reduce cutting forces during finishing passes while still providing sufficient edge support for light interruptions. Together, these features contribute to repeatable surface integrity and reduced downtime for cleaning and chip management. ISO system compatibility for straightforward integration The insert follows the ISO SNMG120404 form and is compatible with standard external holders and boring bars when matched by form, relief angle, tolerance class, clamping method, size and thickness. With a 12 mm size and 4.76 mm thickness plus a cylindrical hole for secure fastening, the component integrates into common turning tool systems without the need for bespoke adapters. This makes tool-room planning more predictable and simplifies stocking: the insert can be combined with existing holders, shims and clamping sets to create a robust tooling package. Application guidance for reliable results Designed primarily for turning on medium steel, the geometry and grade excel under steady cutting conditions; they are also suitable for light interruptions provided machine and setup rigidity are adequate. For best results, select a holder that minimises overhang and ensures stable clamping, and match feeds and depths to the stability of the setup rather than pushing extremities of the grade. When replacement is required, the double-sided design permits indexing for efficient use of the cutting edges, reducing total tooling consumption and improving cost-efficiency. For application support or to secure a supply of SNMG120404 T9215 inserts from Tungaloy, contact Metav Werkzeuge for tailored recommendations and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6772284 Manufacturer SKU: TUN6772284 Label: SNMG120404 T9215 Tungaloy-Wendeplatte Model series: ISO turning inserts Material: carbide Facts Insert designation: SNMG120404 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included hole: cylindrical Insert form: square Cutting angle: 90° Special features Grade/coating: T9215 (CVD-coated) Chipbreaker: double-sided Application: turning (external and internal) Typical use: medium steel, continuous to light interrupted cuts System components: insert, external holder/boring bar, shim/clamping set, spare screws FAQ What holder types are compatible with this SNMG insert? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; the SNMG120404 designation matches standard ISO SNMG holders and boring bars when these parameters align. Is the T9215 grade suitable for interrupted cuts? The T9215 CVD-coated grade is optimised for continuous to light interrupted cuts in medium steel, combining wear resistance with edge stability for predictable performance. How does the double-sided chipbreaker benefit production? A double-sided chipbreaker provides consistent chip control and allows indexing of unused edges, which extends tool life and reduces handling of sharp swarf during production. Can this insert be used for internal turning as well as external turning? Yes; the geometry and mounting hole enable use in both external and internal turning applications provided the corresponding holder and setup are appropriate. What size and mounting details should be checked before ordering? Confirm the insert size (12 mm), thickness (4.76 mm), corner radius (0.4 mm), relief angle (0°) and the presence of a cylindrical hole to ensure correct fit with the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance and reliable edge life for productive turning operations; the CVD-coated T9215 grade offers breakage resistance and sustained performance, while ISO compatibility simplifies tool changeovers — order the inserts directly via Metav Werkzeuge or consult our technical advisors for selection support. SNMG120404 T9215 indexable turning insert — CVD-coated carbide, 0.4 mm radius — Tungaloy A SNMG120404 T9215 indexable turning insert designed for medium steel machining, offering robust cutting performance for continuous to slightly interrupted turning applications. CVD-coated carbide grade T9215 Optimised for medium steel machining Double-sided chipbreaker for versatile use ISO SNMG 12×12 mm, 0.4 mm radius Improved throughput through wear-resistant CVD coating The CVD-coated carbide in this insert delivers a balance of wear resistance and breakage resistance, making it a reliable choice for serial turning work. Grade T9215 is optimised for medium steel, allowing higher cutting speeds and extended tool life in continuous to slightly interrupted cuts. By reducing flank wear and maintaining edge geometry, the insert supports stable dimensions and consistent surface finish, which contributes directly to improved process efficiency and lower per-part tooling cost. Proven compatibility and system advantages for quick changeovers Designed as part of an ISO system, the insert fits into established toolholders when form, relief angle, tolerance class, fastening, size and thickness are matched. The system comprises the ISO indexable insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws. This structured approach ensures repeatable seating, straightforward indexing and reduced setup times, which is particularly advantageous in batch production and mixed-series machining where tool changes must be predictable and fast. Geometry that enhances stability and cutting predictability Square plate geometry with a 12 mm inscribed size and 4.76 mm thickness provides a sturdy cutting edge and good support in the seat. The 0.4 mm corner radius gives a balance between edge strength and finish quality, while the 0° relief angle provides a neutral seating position for many turning tasks. A cylindrical hole secures the insert reliably in the clamp; the double-sided chipbreaker design allows two usable cutting positions per side, extending service life before indexing. These features together ensure predictable chip control and repeatable results on medium steel components. Practical selection advice and lifecycle considerations Select the chipbreaker and grade to match workpiece material, cutting conditions and machine stability — for the present grade that means prioritising medium steel programmes and steady feeds. Regular inspection for flank wear and micro-chipping preserves component quality; the insert’s double-sided design and CVD coating support multiple indexings to maximise service life. For technical data sheets, recommended cutting parameters or application examples, Metav Werkzeuge provides tailored advice to align tool choice with production goals. For application consultations, availability checks or to request cutting data for Tungaloy SNMG120404 T9215 indexable inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our specialists will assist with compatibility and selection. Technical data Article number: 6796042 Manufacturer SKU: TUN6796042 SKU: 6796042-Tungaloy Model series: ISO indexable turning inserts Designation: SNMG120404 Facts Size (inscribed): 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 90° Special features Material: carbide Coating: CVD-coated Grade: T9215 Plate form: square Hole style: cylindrical hole (with hole) Chipbreaker: double-sided Application: turning; optimised for medium steel; suitable for continuous to slightly interrupted cuts ISO compatibility: determined by form, relief angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert best suited for? The SNMG120404 T9215 indexable turning insert from Tungaloy (SKU 6796042-Tungaloy) is optimised for medium steel and performs well in continuous to slightly interrupted turning operations thanks to its CVD-coated carbide composition. How does the T9215 coating improve cutting performance? The CVD-coated T9215 grade on the SNMG120404 improves wear resistance and edge stability, enabling longer tool life and more consistent surface finishes under demanding production conditions. Is the insert compatible with standard ISO SNMG holders? Yes — the SNMG120404 follows ISO plate geometry; compatibility requires matching the holder by form, relief angle, tolerance class, fastening method, size and thickness to ensure correct seating and clamping. What are the key geometric specifications of the insert? The SNMG120404 insert is square with a 12 mm inscribed size, 4.76 mm thickness, a 0.4 mm corner radius, a 0° relief angle and a 90° included angle; it features a cylindrical hole for secure clamping. When should the insert be indexed or replaced? Indexing or replacement of the SNMG120404 is recommended when measurable flank wear or chipping affects dimensional accuracy or surface quality; the double-sided chipbreaker and CVD coating allow multiple indexings before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9215 Wendeplatten - Tungaloy
High wear resistance and fracture safety of the T9215 grade deliver consistent productivity in medium steel turning; combined with ISO interchangeability and a 0.4 mm corner radius, the insert supports stable, repeatable machining. Order directly via Metav Werkzeuge or consult the technical team for application-specific guidance. SNMG 120404 T9215 indexable turning insert — CVD‑coated carbide, 0.4 mm radius, by Tungaloy SNMG 120404 T9215 is an ISO‑standard indexable insert for turning; designed for external and internal operations in medium steel where high productivity and reliable tool life are required CVD-coated carbide grade T9215 Optimised for medium steel machining Double-sided chipbreaker for consistent chips ISO SNMG geometry with cylindrical hole Productivity optimised for medium steel turning The CVD‑coated T9215 grade combines high wear resistance with robust fracture behaviour to extend tool life under continuous to slightly interrupted cuts. As a CVD-coated carbide solution, this insert improves process stability at elevated cutting speeds, which reduces tool change frequency and lowers the cost per component. The balanced performance profile is particularly advantageous for medium steel applications, where productivity and consistent surface quality must be maintained across batch runs. Consistent geometry for secure clamping and repeatable results Built to the ISO SNMG form, the square plate with a 0.4 mm corner radius and 90° approach angle ensures predictable engagement and repeatable positioning in compatible holders. The plate’s 4.76 mm thickness and 12 mm size contribute to rigidity, while the cylindrical hole permits secure fastening with common clamping systems. Compatibility depends on form, relief angle, tolerance class, fastening type, size and thickness; this standardised geometry reduces setup time and simplifies tool management across different machines. Controlled chip formation and straightforward application choice The double-sided chipbreaker is engineered to produce manageable chips when machining medium steel, improving surface finish and reducing the risk of recutting. Selection of the chipbreaker and the cutting grade should be matched to the workpiece material and the cutting conditions — stability of the setup and the nature of the cut (continuous vs interrupted) determine the optimum combination. The insert is intended for use with a complete system comprising an indexable insert, a matching external holder or boring bar, a shim/clamping kit and replacement screws to secure reliable performance in production environments. Contact Metav Werkzeuge for tailored application advice, sample availability and to request a quotation for the Tungaloy SNMG120404 T9215 indexable insert — our specialists are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt assistance Technical Data Article number: 6796084 SKU: 6796084-Tungaloy Manufacturer SKU: TUN6796084 Model series: ISO-Drehwendeschneidplatten Designation: SNMG120404 T9215 Core Data Corner radius: 0.4 mm Approach angle: 90° Plate thickness: 4.76 mm Plate size: 12 mm Relief angle: 0° Design & Features Material: cemented carbide Coating: CVD coating, grade T9215 Double-sided chipbreaker Quadrilateral (square) plate form With cylindrical hole ISO SNMG geometry for external and internal turning Suited to continuous and slightly interrupted cuts FAQ Which materials is this grade best suited to? The SNMG120404 T9215 indexable insert is optimised for medium steel machining; the CVD‑coated carbide grade T9215 combines wear resistance and toughness for productive turning of steel materials. Can the insert be used for interrupted cuts? Yes; the T9215 grade is suitable for continuous to slightly interrupted cuts, though the degree of interruption and the rigidity of the setup should guide the final application choice. What clamping components are required for use? Use an ISO‑compatible SNMG external holder or boring bar together with a suitable shim/clamping kit and replacement screws to secure the SNMG120404 insert reliably. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius improves edge strength and contributes to stable cutting forces, promoting better surface finish and longer tool life in standard turning operations. What are the main advantages of the T9215 coating? The CVD coating of the T9215 grade increases wear resistance while maintaining fracture safety, enabling higher productivity and consistent results on medium steel workpieces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9215 Wendeplatten - Tungaloy
Combining CVD-coated carbide T9215 with the SNMG geometry delivers high wear resistance and fracture toughness for productive medium-steel turning; the 0.4 mm corner radius supports fine finishes and repeatable results. Order the SNMG120404 T9215 insert directly via Metav Werkzeuge or consult the specialists for application-specific advice. SNMG 120404 T9215 Tungaloy turning insert — CVD-coated carbide, 0.4 mm corner radius The SNMG 120404 T9215 is an ISO-standard square turning insert engineered for external and internal turning of medium steels, offering a robust CVD-coated cemented carbide grade for continuous to lightly interrupted cutting. ISO standard SNMG geometry CVD-coated carbide T9215 for wear resistance 0.4 mm corner radius for fine surface finish Double-sided with cylindrical hole for secure clamping Consistent productivity for medium-steel turning The SNMG insert capitalises on the T9215 grade — a CVD-coated carbide developed for mid-range steel applications — to combine elevated wear resistance with reliable fracture toughness. This balance reduces unplanned downtime and supports stable cycle times during continuous or lightly interrupted cutting. The square insert geometry and the 0.4 mm corner radius contribute to consistent surface quality, making the component suitable for both finishing passes and light semi-finishing where tool life and reproducibility matter. Secure clamping and easy compatibility with ISO holders Compatibility with a clamping system depends on insert form, clearance angle, tolerance class, fixing method, size and thickness; the SNMG120404 features a cylindrical hole and standard dimensions to match ISO-designated holders and boring bars. Choosing a correctly rated external holder or boring bar with the matching seat and clamping parts ensures the insert’s performance is realised in practice. The indexable design with a central hole and square form enables straightforward indexing, while the insert thickness and tolerance ensure repeatable geometry across replacements. Improved chip control and process stability Equipped with a double-sided breaker and the wear-resistant coating of the T9215 grade, the insert supports effective chip formation and evacuation for a broad range of steels. The CVD coating enhances surface hardness and thermal stability, which helps maintain edge integrity under elevated cutting temperatures and higher feed rates. For workshops seeking higher throughput, this tool grade promotes longer periods between tool changes while maintaining dimensional accuracy and surface quality. Application guidance for reliable results Select the matching chipbreaker and grade variant based on workpiece material, type of turning (external or internal) and machine/tooling rigidity. The SNMG geometry performs best in stable setups; for interrupted cuts or less rigid operations, opt for increased clamping stiffness and check the suitability of the chipformer. System components typically include the ISO indexable insert, a compatible external holder or boring bar, an underlay/shim or clamp set and matching replacement screws — ensuring a complete, serviceable tooling solution for production environments. For tailored recommendations on using the SNMG120404 T9215 insert in a specific turning application, contact Metav Werkzeuge for expert selection support or to order components; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944731 Manufacturer SKU: TUN6944731 Label: SNMG120404 T9215 Tungaloy-Wendeplatte Model series: ISO indexable turning inserts Facts Insert designation: SNMG120404 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Special features Grade: T9215 Coating: CVD-coated carbide Shape: square Hole: with hole (cylindrical hole) Breaker: double-sided Application: turning FAQ What materials is this insert intended for? The SNMG120404 T9215 insert is specified for medium steel machining; the T9215 grade combines wear resistance and fracture toughness for productive steel turning. Is the insert indexable on both sides? Yes, the insert is double-sided with a central cylindrical hole, allowing indexing and secure clamping for extended tool life. How does the T9215 coating affect cutting performance? The CVD coating on the T9215 grade increases thermal and wear resistance, helping to maintain edge stability at higher cutting speeds and during continuous to light interrupted cuts. Which holder type is required for secure use? An ISO-compatible external turning holder or a boring bar with matching seat geometry, clamping set and replacement screws is required to achieve the intended stability and repeatability with the SNMG120404 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, reliable fracture toughness and ISO compatibility for uninterrupted production. Order the genuine insert via Metav Werkzeuge or consult the technical team for matching holder recommendations. SNMG120404 T9215 square indexable turning insert — CVD-coated carbide, 0.4 mm radius — Tungaloy The SNMG120404 T9215 is a square, ISO-standard indexable insert engineered for general external and internal turning, optimised for productive machining of medium steels. CVD-coated carbide grade T9215 0.4 mm corner radius for robust edges Double-sided chipbreaker for stable chip control ISO-compliant form for wide holder compatibility Productivity through a wear-resistant CVD coating The CVD-coated carbide grade T9215 combines high wear resistance with dependable fracture toughness, making it well suited to sustained production runs on medium-strength steel. This grade is designed to maintain cutting performance in both continuous and lightly interrupted cuts, which reduces unscheduled downtimes and contributes to a predictable tool-life curve. The result is a cost-effective cutting edge that supports consistent cycle times and fewer insert changes. Geometry that balances surface finish and tool life A square plate with a 0.4 mm corner radius and an included angle of 90° offers a compromise between edge strength and achievable surface quality. The modest corner radius increases resistance to chipping under heavier engagement, while still permitting fine surface finishes when set up accordingly. The double-sided chipbreaker aids controlled chip formation, reducing the risk of long, entangling swarf and helping to maintain stable cutting forces during each pass. ISO compatibility for straightforward integration As an ISO-standard turning insert from the ISO turning insert series, the component integrates easily with matching holders provided the form, relief angle, tolerance class, fastening and thickness are respected. Its 4.76 mm plate thickness and 12 mm inscribed circle are typical dimensions that allow selection from a broad range of compatible external or boring holders. Clear specification of these parameters makes tool changeovers predictable and simplifies inventory management on the shop floor. Practical application and handling benefits The insert’s cylindrical hole and standard hole style enable secure fastening and indexing in suitable clamps or screw systems. Being double-sided, it offers multiple usable edges per insert, improving cost-per-edge performance. For workshop planners, this means fewer tool assemblies to manage and improved uptime. When selecting cutting parameters, prioritise stable clamping and appropriate feed rates to exploit the grade’s performance while preserving edge life. Contact Metav Werkzeuge today for application advice or to secure genuine Tungaloy SNMG120404 T9215 indexable inserts and compatible holders through Metav Werkzeuge. Technical data Article number: 6951009 Manufacturer SKU: TUN6951009 Brand: Tungaloy Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Inscribed circle: 12 mm Relief angle: 0° Included angle: 90° Manufacturer article number: 6951009 Special features Material: carbide Coating/grade: T9215 (CVD) Double-sided chipbreaker Square form Cylindrical hole ISO turning insert series Application: turning (external and internal) Suitable for medium steel FAQ What materials is this insert suited to machine? The Tungaloy SNMG120404 T9215 insert is optimised for medium steel machining, delivering a balance of wear resistance and edge toughness appropriate for continuous and lightly interrupted cuts. Is the SNMG120404 indexable and reversible? Yes, the SNMG120404 is a double-sided indexable insert; the design provides multiple cutting edges that can be indexed to extend overall tool life. How does the T9215 grade improve productivity? The T9215 CVD coating offers improved wear resistance and chipping resistance, enabling higher productivity with steadier performance over longer tool-life intervals. What dimensions and geometry determine holder compatibility? Compatibility depends on plate form, inscribed circle (12 mm), plate thickness (4.76 mm), relief angle and fastening style; ensuring these match the chosen holder secures repeatable seating and performance. Can this insert be used for internal turning? Yes, the geometry and ISO standardisation allow application in both external and internal turning operations when paired with a suitable boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, reliable fracture toughness and full ISO compatibility for efficient medium-steel turning. Order the SNMG120404 T9215 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120404 T9215 Tungaloy indexable insert — CVD-coated carbide, 0.4 mm corner radius The SNMG120404 T9215 is an ISO-standard indexable turning insert designed for medium steel machining in external and internal turning applications. CVD-coated carbide for high wear resistance ISO-standard SNMG shape, 90° square form 0.4 mm corner radius for versatile finishing Double-sided chipbreaker, suitable for turning Longer tool life through a wear-resistant grade The CVD-coated T9215 grade is engineered for a balance of wear resistance and fracture toughness, making it well suited to continuous and slightly interrupted cuts in medium steel. The coating reduces flank wear and maintains edge integrity, which translates into fewer insert changes and more productive machining cycles. For production environments where consistent component quality and predictable tool performance matter, this grade supports stable process windows and reduced downtime. Predictable geometry for consistent surface quality The insert’s ISO-standard SNMG geometry and 90° square form deliver repeatable cutting behaviour across compatible toolholders. The 0.4 mm corner radius assists with surface finish and edge strength, while the double-sided design doubles the number of usable edges before replacement. Compatibility with a holder depends on form, clearance angle, tolerance class, clamping method, size and thickness; matching these parameters ensures correct seating and clamping force, which is essential for precision turning and extended tool life. Practical guidance for efficient turning operations Chip control is provided by the double-sided chipbreaker, which helps produce short, controllable chips and supports stable cutting forces for improved surface quality. Selection of the correct chipbreaker and grade should reflect the workpiece material, machining type and machine-tool stability to achieve optimum results. The system comprises the indexable insert together with a suited external holder or boring bar, shim/clamp set and replacement screws; this modular approach allows straightforward replacement and economical inventory management. Contact Metav Werkzeuge to source the Tungaloy SNMG120404 T9215 indexable insert and receive advice on holder compatibility and optimal chipbreaker selection Technical Data Article number: 6772291 Manufacturer SKU: TUN6772291 Manufacturer: Tungaloy Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Shape angle: 90° Hole style: cylindrical hole Double-sided design Special features Material: carbide Coating/grade: T9215, CVD-coated Chipbreaker: double-sided ISO designation: SNMG120404 Application: external and internal turning; medium steel System components: insert, compatible holder or boring bar, shim/clamp set and spare screws FAQ What are the typical applications for this insert? The SNMG120404 T9215 Tungaloy indexable insert is intended for external and internal turning of medium steel, providing a balance between wear resistance and toughness for continuous to slightly interrupted cuts. How does the T9215 grade affect tool life? The CVD-coated T9215 grade on this indexable insert enhances wear resistance while maintaining fracture toughness, which extends usable edge life under typical medium-steel turning conditions. Which holders are compatible with SNMG120404 inserts? Compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; the SNMG120404 requires a holder or boring bar designed for ISO SNMG inserts with a cylindrical-hole clamping arrangement. How many cutting edges does the insert provide? The SNMG120404 is double-sided, providing multiple usable cutting edges before indexation or replacement is required. What role does the chipbreaker play on this insert? The double-sided chipbreaker controls chip formation to produce short, manageable chips, aiding process stability and surface finish during turning operations with the SNMG120404 T9215 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade designed for medium steel turning and a double-sided chipbreaker for reliable chip control; the insert’s square form and 90° geometry ensure predictable cutting behaviour in both external and internal turning. Order the SNMG120404 T9215 insert through Metav Werkzeuge or consult our advisors for application-specific recommendations. SNMG 120404 T9215 Turning insert by Tungaloy — CVD-coated carbide, 90° geometry SNMG120404 T9215 is an ISO-standard turning insert engineered for productive medium-steel machining with a focus on wear resistance and fracture safety CVD-coated carbide for wear resistance Optimised for medium steel turning Double-sided chipbreaker for secure control Square form with 90° cutting geometry Consistent productivity for medium-steel turning The CVD-coated carbide grade T9215 combines high wear resistance with good toughness, making it particularly suited to continuous and lightly interrupted cuts in medium steel. That combination reduces flank and crater wear, extending tool life and enabling longer uninterrupted runs—this translates into fewer tool changes and improved machine uptime. The insert’s 90° geometry yields predictable engagement and is well suited to standard external and internal turning operations, supporting reproducible process parameters and stable surface quality. Seamless system fit and secure clamping for straight-forward integration Compatibility with toolholders depends on form, relief angle, tolerance class, fastening method, size and thickness; the square SNMG120404 form and 4.76 mm thickness match common ISO holders and clamping systems. Using a matching shim and replacement screw as part of the system—insert, compatible holder, shim/clamping set and spare screws—ensures correct seating and repeatable positioning. Defined dimensional data such as the 12 mm inscribed circle and 0.4 mm corner radius support accurate set-up and make it easier to select the appropriate holder for minimal runout and reliable tool life. Durability and chip control explained for dependable results The double-sided chipbreaker provides controlled chip formation across typical turning feeds for medium steels, reducing the risk of long, stringy chips and improving surface finish. The CVD coating forms a hard, wear-resistant barrier while retaining a tough substrate beneath, which helps avoid brittle fracture under varying cutting loads. For operations requiring specific chip shapes or interrupted cuts, choosing the correct chipbreaker variant and cutting data will optimise heat distribution and process stability, resulting in consistent part quality and lower overall machining costs. For application advice or to request tailored batch sizes of the Tungaloy SNMG120404 T9215 insert, contact Metav Werkzeuge for technical consultation and ordering assistance. Technical data Article number: 6944789 Manufacturer SKU: TUN6944789 SKU: 6944789-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: SNMG120404 T9215 Tungaloy insert Numbers / Core technical data Inscribed circle: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief (clearance) angle: 0° Cutting angle: 90° Manufacturer article number: 6944789 Designs / Special features Coating: CVD Material: Carbide Form: Square (SNMG) Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning Grade: T9215 FAQ What machining tasks is this insert best suited to? This insert is designed for turning operations and the T9215 grade is the first choice for medium steel machining, offering a balance of wear resistance and toughness. How does the CVD coating benefit tool life? The CVD-coated carbide grade reduces abrasive wear while maintaining a durable substrate, so the SNMG120404 T9215 insert sustains longer cutting intervals and steadier performance under continuous cuts. Which holders are compatible with this insert? Compatibility requires matching the insert’s square form, relief angle, tolerance class, fastening method, size and thickness; selecting an ISO-compatible external holder or boring bar that accepts SNMG 12×12 inserts is recommended. Can the same insert be used for internal and external turning? Yes, the square geometry and 90° cutting face make the insert suitable for both external and internal turning when paired with the correct holder and clamping components. What chip control can be expected with the double-sided chipbreaker? The double-sided chipbreaker is developed to produce short, manageable chips at typical turning feeds for medium steel, improving surface finish and reducing chip entanglement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, universally applicable cutting solution that combines CVD-coated carbide resilience with a compact, ISO‑standard geometry for predictable performance in medium to heavy steel turning. Order the insert via Metav Werkzeuge or consult our team for holder compatibility and application advice. SNMG 120404 T9225 — Turning indexable insert by Tungaloy (square 12 mm, 0.4 mm radius) SNMG120404 T9225 is a compact, ISO‑format indexable insert designed for precision turning in industrial applications, compatible with standard ISO holders and suitable for varying engagement conditions. CVD‑coated carbide grade T9225 Suitable for medium to heavy steel turning Square 12 mm with 0.4 mm corner radius Double‑sided chipbreaker with cylindrical hole High‑performance grade for demanding steel turning The insert delivers stable cutting under variable engagement thanks to the T9225 grade: a CVD‑coated carbide designed as a robust universal solution for medium to heavy steel machining. The coating enhances wear resistance while the substrate provides toughness where interrupted cuts or changing conditions occur, leading to extended tool life and fewer indexings. This combination reduces tooling costs per component and supports consistent cycle times on production lines. ISO compatibility and simple integration into tool systems Manufactured to ISO specifications, the geometry and dimensions ensure compatibility with a wide range of external holders and boring bars. Critical dimensions — 12 mm plate size, 4.76 mm thickness and 0.4 mm corner radius — together with the 0° clearance and the 90° included angle inform holder selection and clamping requirements. The insert’s cylindrical hole and fixing configuration permit secure mounting; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so matching the insert with the correct clamping kit ensures reliable repeatability and minimal set‑up time. Chip control, surface quality and application guidance The double‑sided chipbreaker is optimised for chip control across a range of feeds and depths of cut, improving swarf evacuation and reducing the risk of built‑up edge. For exterior and interior turning, select the chipbreaker and grade to suit material and workpiece stability; this turning plate is particularly effective where moderate to heavy cuts and intermittent engagement are expected. The result is a consistent surface finish, dependable edge life and reproducible results across lot production, which supports quality assurance and reduces secondary work. Contact Metav Werkzeuge for tailored holder recommendations and immediate availability of Tungaloy turning inserts — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 6944790 Manufacturer SKU: TUN6944790 Label: SNMG120404 T9225 Tungaloy indexable insert Numbers / Core technical data Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 90° Manufacturer article number: 6944790 Designs / Special features Material: carbide Coating: CVD Chipbreaker: double‑sided Hole: cylindrical hole Shape: square Series: ISO turning indexable inserts Grade application: medium to heavy steel turning FAQ What materials is this insert suited for? The SNMG120404 T9225 insert is specified for medium to heavy steel machining; the Tungaloy T9225 grade combines hardness and toughness suitable for fluctuating engagement conditions. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO dimensions; compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness. How does the chipbreaker affect performance? The double‑sided chipbreaker on this turning plate improves chip control and evacuation, which supports stable cutting, reduces edge build‑up and contributes to a consistent surface finish. Can this insert be used for interrupted cuts? The CVD‑coated carbide grade T9225 is designed to withstand slightly interrupted cuts and changing engagement, offering increased toughness compared with purely hard grades. What are the key dimensions to check when selecting a holder? Verify the plate size (12 mm), thickness (4.76 mm), corner radius (0.4 mm), clearance angle (0°) and the presence of a cylindrical hole to ensure correct clamping and repeatability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120404 T9225 Wendeplatten - Tungaloy
Robust ISO-standard SNMG 120404 insert in T9225 CVD-coated carbide offers reliable edge strength with a 0.4 mm corner radius and a double-sided chipbreaker for consistently productive turning in steel. Order the insert directly via Metav Werkzeuge or consult our application advisers for selection support. SNMG 120404 T9225 — ISO indexable insert for turning (Tungaloy, CVD-coated carbide, R0.4) SNMG 120404 T9225 is an ISO-standard square indexable insert engineered for external and internal turning, delivering a robust, wear-resistant carbide grade for medium to heavy steel machining under varying engagement conditions. ISO-standard square insert CVD-coated carbide grade T9225 0.4 mm corner radius for edge stability Cylindrical hole and double-sided chipbreaker High-efficiency turning where reliability matters The SNMG120404 insert is designed for consistent metal removal in demanding turning operations; the combination of an ISO-standard square format and the T9225 CVD-coated carbide provides a balance of toughness and wear resistance that suits medium to heavy steel machining. The 0.4 mm corner radius improves edge strength and reduces the risk of chipping during interrupted cuts, which translates directly into longer productive cycles and fewer tool changes. By focusing on measurable performance — material suitability, edge geometry and coating technology — the result is a predictable, efficient machining process that supports throughput and uptime. Secure clamping and straightforward insert replacement Compatibility with a toolholder depends on form, relief angle, tolerance class, fastening and plate dimensions; the insert’s cylindrical hole and standard geometry permit reliable clamping in compatible SNMG holders. The neutral 0° relief angle works with appropriately rated holders to maintain a correct cutting orientation and stable chip flow. The square, double-sided design provides multiple cutting edges per insert, simplifying stock management and reducing changeover time in the workshop. Clear dimensional standards make it simple to verify fitment before assembly, supporting fast, error-free tool replacement. Durable grade and coating for variable cutting conditions The T9225 grade is a CVD-coated carbide developed for robust, universal performance in steel turning where varying engagement conditions or lightly interrupted cuts demand enhanced toughness. The chemical vapour deposited coating improves resistance to flank wear and maintains a stable cutting edge across a range of speeds and feeds. For users with mixed production runs or uncertain cut stability, this grade reduces the likelihood of premature failure and contributes to consistent surface finish and dimensional control — tangible benefits for process planners and shopfloor managers focused on repeatable results. Practical selection and application guidance Choose the chipbreaker and grade to match the workpiece material, feed and depth of cut; the double-sided chipbreaker on this insert is suited to medium to heavy turning regimes. The plate thickness of 4.76 mm and the 12 mm size ensure sufficient support under higher cutting forces, while the square geometry provides four usable edges per index, improving cost efficiency. Where machining strategy requires, select holders specified for SNMG geometry and verify clamping torque and clearance to maintain tool life. For optimised results, pair the insert with a holder that matches form, tolerance and seat specifications. For personalised advice or to procure the Tungaloy SNMG 120404 T9225 CVD-coated carbide insert for robust turning applications, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944748 Manufacturer SKU: TUN6944748 Brand: Tungaloy Name: SNMG120404 T9225 Tungaloy insert SKU: 6944748-Tungaloy Facts Plate size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included hole: cylindrical Index angle: 90° Special features Material: carbide Coating/grade: T9225 (CVD-coated) Plate form: square Chipbreaker: double-sided Hole style: with cylindrical hole Application: turning (external and internal) FAQ Which materials is this insert best suited for? The SNMG 120404 T9225 insert is optimised for medium to heavy steel machining; the T9225 grade offers toughness for variable engagement and light interruptions. How does the T9225 coating improve performance? The CVD-coated T9225 provides enhanced wear resistance and stable cutting-edge life, which helps maintain surface finish and dimensional consistency during extended runs. Is the insert compatible with standard SNMG holders? Compatibility depends on holder form, relief angle, tolerance and fastening; the SNMG 120404 geometry and cylindrical hole are designed to fit standard SNMG toolholders when specifications match. How many cutting edges are available per insert? The square, double-sided design provides multiple usable edges; indexing to fresh edges is straightforward and increases cost efficiency per insert. What chip control can be expected with the double-sided chipbreaker? The double-sided chipbreaker offers predictable chip formation across a range of feeds, aiding evacuation and reducing the risk of chip entanglement in typical turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, a square 90° geometry with a 0° relief, and a double-sided chipbreaker to secure stable chip formation and predictable tool life in medium to heavy steel turning. Order via Metav Werkzeuge or consult our advisors for application-specific guidance. SNMG 120404 T9225 turning insert — Tungaloy indexable insert with CVD-coated carbide SNMG 120404 T9225 is an ISO-standard, square turning insert designed for medium to heavy steel machining, offering a robust universal grade and a double-sided chipbreaker for consistent chip control CVD-coated carbide Grade T9225 Square 90° geometry with 0° relief Double-sided chipbreaker for stable chips Four usable cutting edges per insert Reliable cutting performance for demanding steel turning The CVD-coated carbide of the T9225 grade combines wear resistance with enhanced toughness, making the insert particularly suited to medium to heavy steel operations where cutting conditions can vary. The coating improves abrasion resistance while the substrate provides necessary strength for slightly interrupted cuts, so the result is longer effective tool life and consistent surface quality. For shops seeking predictable process performance, this balance reduces unscheduled tool changes and supports steady production runs. Secure seating and geometry that stabilise cutting Built to ISO dimensions, the square 90° geometry with a 0° relief provides a neutral, negative-style insert that seats firmly in standard external holders or boring bars. The cylindrical hole and standard thickness ensure compatibility with clamping sets and replacement screws, while the defined corner radius 0.4 mm helps achieve repeatable part geometry. This mechanical fit reduces vibration and improves dimensional repeatability when paired with a suitable holder, translating into fewer rejects and faster set-up validation. Productivity through multiple edges and optimised chip control The double-sided chipbreaker geometry gives two usable faces per side, yielding multiple indexing positions and therefore four cutting edges overall. This configuration lowers tooling consumption per edge and improves cost efficiency over time. The chipbreaker is designed to produce controlled swarf when working with steel, supporting safe chip evacuation and steady cutting forces. As a result, cycle times remain stable and component finish is easier to achieve without complex parameter changes. Application guidance and matching to holders Designed for general-purpose turning, the insert performs well in both external and internal turning when paired with the correct holder and cutting data. Compatibility is determined by insert form, clearance angle, tolerance class, fastening and thickness; selecting a holder that matches the ISO SNMG form and that offers rigid clamping will unlock the full potential of the grade. For mixed-production environments the universal nature of T9225 simplifies inventory while providing good all-round performance. For robust and reliable steel turning select the Tungaloy T9225 grade—contact Metav Werkzeuge for tailored holder recommendations and immediate availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951011 Manufacturer SKU: TUN6951011 SKU: 6951011-Tungaloy Model series: ISO turning indexable inserts Facts Insert designation: SNMG120404 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 90° Relief angle: 0° Hole: with cylindrical hole Special features Grade: T9225 (CVD-coated carbide) Chipbreaker: double-sided Plate shape: square Application: turning (external and internal) Compatible with ISO external holders and boring bars FAQ What materials is this insert suitable for? The SNMG120404 T9225 insert from Tungaloy is a universal, robust grade intended primarily for medium to heavy steel machining and handles slightly interrupted cuts with reliable performance. How many cutting edges are available per insert? Due to the double-sided chipbreaker and square format, the SNMG120404 insert provides four usable cutting edges, allowing multiple indexings before replacement. Which holders are compatible with this insert? Compatibility is determined by ISO form, clearance angle, tolerance class, fastening, size and thickness; SNMG120404 fits standard ISO SNMG external holders and compatible boring bars when the seat and screw match the insert dimensions. Is this grade suitable for interrupted cuts? The T9225 grade, featuring a tough CVD-coated carbide substrate, is formulated to tolerate variable engagement and light interruptions, offering stable chip formation under such conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9225 Wendeplatten - Tungaloy
Combine the CVD-coated carbide grade T9225 with ISO compatibility and a 0.4 mm corner radius to achieve productive, repeatable medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult the application specialists for tailored advice. SNMG120404 T9225 ISO turning insert — CVD-coated carbide, 0.4 mm corner radius — Tungaloy The SNMG120404 T9225 is an ISO-standard indexable turning insert designed for medium-to-heavy steel turning, offering a robust CVD-coated carbide grade and a square geometry for stable chip control. CVD-coated carbide grade T9225 Robust for medium–heavy steel turning ISO-compatible SNMG geometry 0.4 mm corner radius for consistent finishes Increase process stability with a robust universal grade The insert's T9225 composition is a CVD-coated carbide blend engineered as a robust universal grade for the middle to heavy end of steel machining. This makes the component suited to variable engagement conditions and light interruptions in the cut, where additional toughness reduces the risk of premature edge breakage. Selecting a tougher grade like this typically improves tool life and reduces unscheduled tool changes, which in turn raises overall shop-floor efficiency and contributes to predictable cycle times. Minimise set-up time thanks to ISO conformity and predictable fit Compatibility to holders is governed by geometry, relief angle, tolerance class, clamping method, size and thickness. The SNMG form (designation SNMG120404) follows ISO conventions, so the insert will seat reliably in standard SNMG-compatible clamps and holders when the correct pocket and screw arrangements are used. Key dimensions such as 4.76 mm plate thickness and 12 mm inscribed circle provide measurable criteria for selecting the matching toolholder, while the 0° relief angle should be matched with an appropriately designed holder to ensure correct cutting clearance and secure clamping. Achieve controlled surface quality and chip control The square plate form combined with a double-sided chipbreaker offers benefits for both external and internal turning operations: repeatable chip formation and improved surface consistency. The 0.4 mm corner radius is well suited to general turning tasks where a balance between strength and finish is required; it provides edge support for interrupted conditions while still allowing for acceptable surface integrity on final passes. Choosing the correct chipbreaker and cutting data in line with the workpiece stability will limit vibration and enhance dimensional control. Practical application advice for workshop implementation The insert is delivered with a cylindrical hole for positive clamping; a stable fixing arrangement reduces micro-movement that causes inaccurate cuts. Because the component is ISO-standard, stocking is simplified and inserts can be rotated or replaced with little downtime, supporting lean inventory strategies. The CVD coating enhances wear resistance under dry or lubricated machining, offering longer flank life in many steel applications and contributing to more consistent production output and lower tooling consumption per part. For application-specific recommendations and to procure the Tungaloy SNMG120404 T9225 insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and rapid supply Technical data Article number: 6781255 SKU: 6781255-Tungaloy Manufacturer SKU: TUN6781255 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Grade: T9225 Material: carbide Coating: CVD-coated Specifications Geometry: SNMG120404 Corner radius: 0.4 mm Relief angle: 0° Plate thickness: 4.76 mm Inscribed circle: 12 mm Insert angle: 90° Hole: with hole Hole style: cylindrical hole Features Square plate form Double-sided chipbreaker ISO-standard turning insert Intended for turning applications Robust universal grade for medium-to-heavy steel Compatibility determined by form, relief angle, tolerance, clamping, size and thickness FAQ Which materials are best suited for this insert? The SNMG120404 T9225 insert is optimised for medium-to-heavy steel machining; the T9225 grade and CVD coating are chosen to balance wear resistance and toughness for such applications. How does the insert attach to the holder? The insert has a cylindrical hole for positive clamping; compatibility depends on holder pocket geometry, clamping method, tolerance class and the specified plate thickness and size. Is the chipbreaker suitable for interrupted cuts? Yes — the double-sided chipbreaker design combined with the robust T9225 grade supports light interruptions and variable engagement conditions by promoting stable chip formation. What finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius provides a compromise between edge strength and surface quality, delivering consistent finishes on general turning passes while supporting edge integrity under tougher conditions. Can this insert be used for internal turning? The insert form and chip control features allow use in both external and internal turning operations, provided a compatible holder and appropriate cutting parameters are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a robust CVD-coated carbide grade and ISO-standard geometry for steady medium‑to‑heavy steel turning; the 0.4 mm corner radius and double‑sided chipbreaker support reliable edge life and chip control. Order this insert directly via Metav Werkzeuge or consult Metav Werkzeuge's advisors for application guidance. SNMG120404 T9225 SNMG turning insert by Tungaloy — CVD‑coated carbide, 0.4 mm radius The SNMG120404 T9225 is an ISO‑standard square turning insert designed for medium‑to‑heavy turning operations, offering a robust universal grade suited to varying engagement conditions. CVD-coated carbide grade T9225 ISO SNMG120404 square insert, 0.4 mm radius Double-sided chipbreaker, with cylindrical hole Built for medium to heavy steel turning Robust grade for changing cutting conditions and productivity The T9225 grade is a CVD‑coated carbide developed as a universal solution for medium‑to‑heavy steel machining where varying engagement or mildly interrupted cuts require extra toughness. The combination of a wear‑resistant coating and a tough substrate reduces flank wear and extends useful life, which in turn supports more predictable tool change intervals and lower running costs per component. This balance of durability and process stability makes the insert suitable for workshops seeking consistent throughput on a wide range of steel alloys. Improved chip control and edge strength for reliable surface quality Equipped with a double‑sided chipbreaker, the insert promotes controlled chip formation under typical turning feeds and depths. The 0.4 mm corner radius increases the edge strength compared with very small radii, helping to resist chipping in heavier cuts while maintaining acceptable surface finish for many finishing or semi‑finishing passes. The CVD coating reduces built‑up edge and abrasion, so parts benefit from steadier surface quality over longer tool life. ISO standard geometry for secure clamping and compatibility The SNMG form is ISO‑standardised: compatibility with a toolholder depends on matching the insert form, clearance angle (0°), tolerance class, fastening method, size and thickness. This insert includes a cylindrical centre hole to suit holders and turning bars designed for SNMG‑type inserts, and its square shape allows rotation to fresh cutting edges where the geometry and hole type permit. Using standardised components simplifies tooling logistics and supports quick indexability in production environments. Practical guidance for selection and application Select the T9225 grade and the appropriate chipbreaker variant according to workpiece material, machining stability and desired surface finish. In unstable setups or highly interrupted cuts, the toughness of this grade helps avoid premature edge failure. Where fine finishes are required, combine suitable feeds and speeds with the insert’s geometry to harness the edge strength without sacrificing surface quality. The insert forms part of a system comprising an ISO turning insert, a compatible holder or turning bar, and the necessary clamp and screws — ensuring safe, repeatable clamping. For reliable medium‑to‑heavy steel turning with Tungaloy's robust T9225 grade, contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6944732 SKU: 6944732-Tungaloy Manufacturer SKU: TUN6944732 Model series: ISO-turning inserts Product name: SNMG120404 T9225 Tungaloy insert Facts Insert size (inscribed circle): 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 90° Special features Material: carbide Coating: CVD Grade: T9225 Shape: square Hole style: cylindrical hole Chipbreaker: double-sided Application: turning FAQ What materials is this insert intended for? The insert in grade T9225 is intended primarily for medium‑to‑heavy steel turning; Tungaloy designed this grade for robustness under variable engagement and mildly interrupted cuts. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius increases edge strength and resistance to chipping compared with finer radii, improving tool life during heavier passes while still supporting decent surface finish when combined with appropriate feeds and speeds. Will this SNMG insert fit my toolholder? Compatibility is determined by the holder's acceptance of ISO SNMG inserts: match the insert form, clearance angle (0°), tolerance class, fastening method, size (12 mm) and thickness (4.76 mm); the cylindrical centre hole is designed for standard clamping systems. What benefit does the double‑sided chipbreaker provide? The double‑sided chipbreaker offers consistent chip formation on both indexable sides, supporting controlled chips across a range of cutting conditions and helping to extend effective tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9225 Wendeplatten - Tungaloy
High toughness and a CVD-coated carbide substrate deliver dependable performance in medium-to-heavy steel turning; the precise 0.4 mm corner radius supports improved surface quality and repeatable results. Order the SNMG120404 T9225 insert directly via Metav Werkzeuge or consult the team for holder compatibility and application advice. SNMG120404 T9225 SNMG indexable turning insert — Tungaloy, CVD-coated carbide The SNMG120404 T9225 is an ISO-standard indexable turning insert designed for medium-to-heavy steel turning, offering a robust universal grade for variable engagement and interrupted cuts. CVD-coated carbide for toughness 0.4 mm corner radius for improved surface ISO-standard geometry for holder compatibility Double-sided chipbreaker, cylindrical hole included Consistent cutting when conditions vary The CVD-coated carbide construction of this indexable insert offers a balance of wear resistance and toughness that is particularly valuable in turning operations with changing engagement or slightly interrupted cuts. The universal grade T9225 is formulated to maintain a stable cutting edge under fluctuating loads, which reduces the frequency of tool changes and helps sustain machining throughput. With this combination, productive material removal and predictable performance can be expected even when process conditions are not ideal, supporting a more efficient production rhythm. Easy integration with ISO tool systems ISO conformity of the geometry and dimensions ensures straightforward mounting in standard holders; compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness. The insert’s cylindrical hole and square shape simplify reliable clamping and indexing in a wide range of external and internal turning holders. This predictable fitment reduces setup time and supports repeatable positioning, which in turn contributes to stable part tolerances and fewer stoppages for adjustments — a practical advantage in series production and job-shop environments. Better surface quality and chip control The small 0.4 mm corner radius combined with a double-sided chipbreaker provides controlled chip formation and helps achieve finer surface finishes on steel components. The chipbreaker geometry directs chips away from the cutting zone, reducing the risk of re-cutting and minimising vibration. As a result, the insert supports consistent component appearance and dimensional accuracy, while the robust substrate maintains the cutting edge under intermittent loading. These attributes are particularly useful when finishing shoulders, fillets or critical external diameters where surface integrity matters. Application focus and material suitability Designed primarily for turning, the insert is a universal choice for medium-to-heavy steel machining where occasional interruptions or variable depths of cut demand increased toughness. The grade’s broad applicability simplifies tool inventory by covering a range of workpiece steels and common turning tasks. For customers seeking a productive, general-purpose solution that still copes with tougher engagement scenarios, this insert represents a pragmatic balance between tool life and versatility. For reliable medium-to-heavy steel turning select the Tungaloy SNMG120404 T9225 indexable insert — contact Metav Werkzeuge for application guidance and compatibility checks to ensure optimal holder pairing and cutting parameters. Technical data Article number: 6796043 SKU: 6796043-Tungaloy Manufacturer SKU: TUN6796043 Model series: ISO turning indexable inserts Material: carbide Grade/coating: T9225 CVD-coated Facts Corner radius: 0.4 mm Plate size: 12 mm Plate thickness: 4.76 mm Insert designation: SNMG120404 Relief angle (free angle): 0° Included hole: cylindrical hole Shape: square Included angle: 90° Special features Double-sided chipbreaker Universal grade for medium-to-heavy steel turning Robust performance for interrupted cuts ISO-standard geometry for holder compatibility Suitable for external and internal turning applications FAQ Which materials is this insert best suited for? The SNMG120404 T9225 indexable insert (Tungaloy, SKU 6796043-Tungaloy) is optimised for medium-to-heavy steel turning, where its toughness and CVD-coated carbide substrate handle variable engagement and mild interruptions. How can I check holder compatibility? Compatibility is determined by holder form, free angle, tolerance class, clamping method, size and thickness; the SNMG120404 T9225 conforms to ISO geometry to ease selection, but confirmation against the specific holder is recommended. What chip control and clamping features are present? This insert features a double-sided chipbreaker and a cylindrical hole, enabling secure clamping and controlled chip formation for consistent evacuation and reduced re-cutting. Is the T9225 grade suitable for interrupted cuts? Yes, the T9225 universal grade provides increased toughness specifically to cope with slightly interrupted cuts and variable machining conditions common in turning operations. Can this insert be used for internal turning as well as external turning? The ISO-standard SNMG120404 geometry and square form make the insert suitable for both external and internal turning, provided the chosen holder supports the required geometry and clearance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9225 and the 0.4 mm corner radius for reliable medium-to-heavy steel turning; the ISO form and cylindrical bore ensure straightforward holder compatibility. Order via Metav Werkzeuge or consult our specialists for cutting data and availability. SNMG120404 T9225 indexable insert for turning — Tungaloy, ISO 120404 SNMG120404 T9225 Tungaloy indexable insert designed for ISO-standard turning applications, offering a robust universal grade for variable engagement conditions. CVD-coated cemented carbide grade T9225 Robust universal grade for medium-to-heavy steel Double-sided chipbreaker for consistent chips ISO SNMG120404 with cylindrical centre hole Reliable performance in demanding turning tasks The CVD-coated cemented carbide composition of this insert delivers a balance of wear resistance and toughness tailored to medium-to-heavy steel machining. The T9225 grade is formulated for situations with varying engagement or slightly interrupted cuts, providing wear protection without sacrificing edge strength. As a result, the insert sustains productive cutting intervals and reduces frequent index changes, contributing to steady output and predictable tool life. Improved chip control and consistent surface quality Equipped with a double-sided chipbreaker, the geometry channels and breaks chips reliably across a range of feeds and depths of cut. Effective chip control reduces re-cutting of material, limits surface blemishes and eases chip evacuation from the tool zone. For operators, this translates into fewer interruptions, more stable machining conditions and a consistently improved surface finish on turned components, even when working with tougher steel grades. Straightforward integration into ISO tool systems As an ISO-specification insert, compatibility with the clamping system depends on form, clearance angle, tolerance class, fastening method, size and thickness. The SNMG120404 designation and square geometry allow direct replacement in standard holders and boring bars that accept SNMG indexable inserts. This interchangeability minimises setup time and simplifies inventory management, enabling fast changeovers and reduced machine downtime across production runs. Recommended applications and cutting strategy This insert is optimised for external and internal turning of steel components where robustness and consistent edge performance are required. With a 0.4 mm corner radius and a plate angle of 90°, the geometry supports general-purpose finishing and medium roughing operations; the T9225 grade particularly suits slightly interrupted cuts and fluctuating engagement. For best results, pair the insert with a stable holder, select a feed appropriate to the corner radius and prefer steady depth of cut to exploit the grade’s combination of toughness and wear resistance. Contact Metav Werkzeuge for customised cutting parameters, availability and application advice for Tungaloy SNMG120404 T9225 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a consultant. Technical data Article number: 6796085-Tungaloy Manufacturer SKU: TUN6796085 Model series: ISO turning indexable inserts Material: Cemented carbide Facts Corner radius: 0.4 mm Insert size: 12 mm Thickness: 4.76 mm Rake angle: 0° Plate angle: 90° Special features ISO designation: SNMG120404 Grade: T9225, CVD-coated Double-sided chipbreaker Square plate geometry Cylindrical centre hole for standard clamping Application: Turning (external and internal) FAQ What materials is this insert suitable for? The SNMG120404 T9225 insert is designed primarily for medium-to-heavy steel machining; the T9225 CVD-coated grade provides a balance of wear resistance and toughness for such applications. How does the chipbreaker affect machining? The double-sided chipbreaker on this insert improves chip control and reduces re-cutting, which helps maintain a consistent surface finish and lowers the likelihood of chip-related interruptions during turning operations. Can this insert be used in any SNMG holder? Yes, the ISO SNMG120404 form and the cylindrical centre hole make the insert compatible with holders and boring bars that accept SNMG indexable inserts, provided the holder matches the size, thickness and clamping style. What cutting conditions suit the T9225 grade best? T9225 is a universal, robust grade suited to variable engagement and lightly interrupted cuts. For optimal performance, use a stable clamping system, moderate cutting speeds and feeds matched to the 0.4 mm corner radius. Is the insert reversible and how many cutting edges are available? The square, double-sided design means the insert is indexable and offers multiple cutting edges before replacement, improving economy and reducing changeover frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9225 Wendeplatten - Tungaloy
Combine the robust T9225 carbide grade with an ISO SNMG120404 form and a 0.4 mm corner radius for dependable medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult our specialists for application advice. SNMG120404 T9225 SNMG Turning insert for Turning by Tungaloy – CVD-coated carbide, 0.4 mm corner radius The SNMG120404 T9225 is an ISO‑standard SNMG indexable insert designed for dependable medium-to-heavy turning of steel, optimised for varying engagement conditions and lightly interrupted cuts CVD-coated carbide Grade T9225 ISO SNMG120404 form, 12 mm square 0.4 mm corner radius for strength Dual-sided chipbreaker with cylindrical hole Consistent cutting performance for steel applications The CVD‑coated T9225 grade delivers a balance of toughness and wear resistance that suits medium-to-heavy steel machining. The coating reduces flank wear and extends effective tool life under fluctuating loads, while the 0.4 mm corner radius increases edge strength for semi‑roughing passes. As a result, the insert ensures repeatable dimensional accuracy and a predictable tool-change interval, supporting sustained production runs with less unplanned downtime. Easy integration into ISO tooling systems and secure clamping Built to ISO dimensions, the SNMG120404 form guarantees compatibility with standard square insert holders and boring bars; fitment depends on form, relief angle and thickness. The insert is supplied with a cylindrical hole and a double-sided chipbreaker, enabling secure fastening and reversible use to halve tooling costs per edge. The 0° relief angle and a 90° included angle provide stable seating in the holder, so clamping forces remain uniform and vibration is minimised—benefits that directly improve surface finish and tool life. Productivity and process stability benefits The carbide substrate and CVD-coated surface of the grade deliver controlled wear progression, which reduces the frequency of tool changes and the risk of sudden edge failure during interrupted cuts. The dual-sided chipbreaker offers reliable chip control across a range of depths of cut, lowering cycle times and improving operator confidence at higher cutting speeds. For production environments, these attributes translate into better machining economy and consistent part quality across batches. For reliable medium‑to‑heavy steel turning with Tungaloy's T9225 grade, contact Metav Werkzeuge for technical advice and availability at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6780857 Manufacturer SKU: TUN6780857 Model series: ISO-Drehwendeschneidplatten Material: Carbide Coating: CVD Grade: T9225 Facts Insert form: SNMG120404 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 90° With hole: cylindrical Special features Double-sided chipbreaker ISO standard geometry for turning Suitable for medium-to-heavy steel turning Robust universal grade for variable engagement Reversible insert for economical use FAQ What materials is this insert best suited for? The SNMG120404 T9225 insert is optimised for medium-to-heavy steel machining, offering toughness for variable engagement and lightly interrupted cuts. Is the insert reversible and how does that affect costs? Yes, the insert is double‑sided; reversing the insert halves the cost per cutting edge and extends the service life before disposal. What does the T9225 grade mean for production runs? Tungaloy’s T9225 is a robust universal grade with a CVD coating that promotes stable wear behaviour and consistent performance during longer cycle times. Can this insert be used in holders from different manufacturers? The SNMG120404 form follows ISO geometry; compatibility depends on holder design, clamping method and tolerance class—ensure the holder matches the ISO SNMG specifications. How does the cylindrical hole help in clamping? The cylindrical hole is intended for positive location and secure screw clamping, improving seating stability and reducing the risk of insert movement under load. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD‑coated carbide grade that combines toughness and stability for medium to heavy steel turning; the square 12 mm form with a 0.4 mm radius and central cylindrical hole ensures reliable seating and repeatable performance. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. SNMG 120404 T9225 – Tungaloy indexable turning insert, CVD‑coated carbide SNMG120404 T9225 is an ISO‑standard indexable turning insert designed for external and internal turning in varying engagement conditions CVD-coated carbide grade T9225 Robust universal grade for medium/heavy steel Square 12 mm insert with 0.4 mm radius ISO‑standard SNMG120404 with cylindrical hole Consistent cutting performance for demanding turning tasks The SNMG120404 insert combines a CVD‑coating with a wear‑resistant carbide substrate to deliver a balance of hardness and toughness that suits interrupted cuts and variable engagement. The T9225 grade is formulated as a robust universal sort for medium to heavy steel machining, offering longer tool life where chip loads and process conditions vary. The square geometry with a 0.4 mm radius provides a controlled cutting edge, improving edge strength for heavier depths of cut while maintaining acceptable surface quality. Design features that simplify holder compatibility and setup Compatibility with common external holders is governed by form, clearance angle 0°, tolerance class, fastening method, size and thickness. The ISO designation ensures interchangeability across standard clamping systems; the central cylindrical hole facilitates precise seating with a secure clamping screw. With a plate thickness of 4.76 mm and a nominal size of 12 mm, the insert mates with a wide range of ISO SNMG carriers, reducing setup complexity and enabling quick index changes for uninterrupted production. Practical benefits from the chipformer and geometry This double‑sided insert features a double-sided chipbreaker adapted to general turning tasks; selecting the correct chipbreaker and the T9225 sort enhances chip control and reduces the risk of built‑up edge during steel machining. The 90° cutting edge geometry contributes to predictable force direction and stable tool engagement, which in turn supports consistent dimensional accuracy and repeatable surface finish. For workshops handling mixed batches, the universal nature of the insert cuts down on tool variants required in stock. Choosing inserts for process reliability and productivity When process safety and uptime matter, the combination of a modern coating and a tough carbide base supports sustained productivity by slowing flank wear and preserving the cutting edge. The SNMG120404 insert is suitable where intermittent contact or variable feed and depth demands a more forgiving grade. For new applications, match the chipbreaker and cutter radius to final tolerance and surface requirements; trial runs under representative conditions will identify the optimal feeds and speeds for the T9225 grade. Contact Metav Werkzeuge for tailored application recommendations and availability of the Tungaloy SNMG120404 T9225 turning insert; the Metav Werkzeuge team can advise on holder matching and batch requirements Technical data Article number: 6780781-Tungaloy Manufacturer article number: 6780781 Manufacturer SKU: TUN6780781 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Label: SNMG120404 T9225 Tungaloy-Wendeplatte Dimensions / measurable data Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting edge angle: 90° Hole: cylindrical Materials / special features Substrate: carbide Coating: T9225 (CVD) Insert shape: square Chipbreaker: double-sided Application: turning Compatibility: ISO‑standard SNMG120404 FAQ What materials is this insert designed for? The SNMG120404 T9225 Tungaloy turning insert (SKU 6780781-Tungaloy) is optimised for medium to heavy steel machining and performs well under variable engagement and mildly interrupted cuts. How does the T9225 coating benefit the machining process? The T9225 CVD coating on this indexable insert increases wear resistance and edge life, enabling stable cutting performance and reduced frequency of insert changes for turning operations. Which holders are compatible with this insert shape and size? Compatibility is determined by form, clearance angle (0°), tolerance class, fastening, size (12 mm) and thickness (4.76 mm); the ISO‑standard SNMG120404 geometry fits standard SNMG holders designed for square inserts. Is the chip control suitable for interrupted cuts? Yes, the insert’s double-sided chipbreaker and robust carbide substrate make it suitable for interrupted or variable cuts commonly encountered in production turning. What are the key dimensions to check when replacing an insert? Check the insert size (12 mm), thickness (4.76 mm), corner radius (0.4 mm) and hole style (cylindrical) to ensure correct seating and clamping with the intended holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a robust T9225 CVD-coated carbide grade, precise ISO SNMG120404 geometry and a 0.4 mm corner radius to secure stable chip control and extended tool life in medium to heavy turning operations; order directly via Metav Werkzeuge or contact the consultants for application advice. SNMG 120404 T9225 SNMG120404 indexable insert for Turning by Tungaloy — CVD-coated cemented carbide, 0.4 mm corner radius SNMG120404 T9225 Tungaloy insert for ISO-spec turning applications, designed for outside and inside turning with a robust universal grade for medium to heavy steel machining ISO SNMG120404 geometry for consistent fit CVD-coated carbide grade T9225 for toughness 0.4 mm corner radius for durable edge strength Double-sided chipbreaker with cylindrical hole for clamping Reliable performance under variable cutting conditions The T9225 grade is a CVD-coated cemented carbide developed as a robust universal solution for medium to heavy steel machining where changing engagement or light interrupted cuts require increased toughness. The combination of a resilient substrate and protective CVD coating reduces flank wear and maintains edge integrity, which supports longer tool life and fewer indexings. For production environments seeking consistent component quality, this specification delivers predictable results and lower process variability. Secure clamping and precise fit for ISO turning systems The SNMG120404 geometry follows ISO standards, ensuring compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness. The insert’s cylindrical hole and square plate form allow secure fastening in appropriately specified holders; the 0° relief and exact plate dimensions contribute to repeatable seating and stable cutting forces. Specifying ISO-compliant inserts simplifies tool inventory management and reduces setup uncertainty in mixed‑holder toolrooms. Efficient chip control and practical edge protection A double-sided chipbreaker tailored to the plate shape provides improved chip formation and evacuation during turning, reducing the risk of built-up edge and surface defects. The 0.4 mm corner radius offers a balance between strength and profile accuracy, protecting the cutting edge on heavier passes while still enabling acceptable surface finish. Combined with the plate’s 4.76 mm thickness and 12 mm size, the design supports durable performance in demanding cut conditions without sacrificing process reliability. Compatibility, selection and application guidance Selection of an appropriate chipbreaker and grade should be matched to the workpiece material, machining method and machine stability; the T9225 grade is intended for a broad range of steel applications where toughness is prioritised. Compatibility with holders requires matching the SNMG120404 profile, plate thickness and hole style. For technical clarifications on holder matching or recommended cutting data, the technical team at Metav Werkzeuge can supply guidance and tested parameter ranges to help optimise cycle times and tool life. For application support and procurement of Tungaloy inserts in the T9225 grade, contact Metav Werkzeuge for tailored recommendations and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780775 Manufacturer SKU: TUN6780775 SKU: 6780775-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts ISO designation: SNMG120404 Plate form: square Size: 12 Thickness: 4.76 Corner radius: 0.4 Relief angle: 0° Hole: with hole Hole style: cylindrical hole Special features Grade: T9225 Cutting material: CVD-coated cemented carbide Chipbreaker: double-sided Typical use: outside and inside turning Angle: 90 degrees FAQ Which materials is this insert best suited for? The T9225 grade is formulated for medium to heavy steel machining and performs reliably under variable engagement and light interrupted cuts. What are the key geometry and size details of the insert? The insert follows the ISO SNMG120404 specification with a square plate, 12 mm size, 4.76 mm thickness and 0.4 mm corner radius, featuring a cylindrical hole for clamping. How can I check compatibility with existing holders? Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; compare holder specifications to SNMG120404 dimensions and hole style before use. What substrate and coating does the insert have? This indexable plate uses a CVD-coated cemented carbide substrate in grade T9225, optimised for toughness and stable chip formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a robust CVD-coated T9225 grade and the ISO SNMG120404 format for reliable medium to heavy steel turning; order directly via Metav Werkzeuge or consult the team for holder compatibility and process optimisation. SNMG 120404 T9225 SNMG turning insert for turning — Tungaloy SNMG120404 T9225 is an ISO-format insert designed for stable external and internal turning, particularly in medium to heavy steel applications. ISO SNMG format, 12 mm square CVD-coated carbide grade T9225 Double-sided chipbreaker, with hole 0° relief angle, 0.4 mm corner radius Consistent cutting performance for mixed and interrupted cuts The CVD-coated grade T9225 provides a balance of wear resistance and toughness that suits variable engagement conditions. As a result, the insert maintains edge stability when encountering slight interruptions or changing feeds. The combination of a wear-resistant surface and a resilient carbide substrate reduces flank wear and therefore extends usable tool life, which supports uninterrupted production and fewer tool changes per shift. Clear compatibility reduces setup time and rejects Manufactured to ISO form, the SNMG120404 geometry ensures predictable mounting behaviour; compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. This standardisation simplifies tooling procurement and minimises fitting errors. The centrally located cylindrical hole and standard dimensions make clamping repeatable, which shortens setup routines and lowers the risk of misalignment-related rejects. Improved chip control and surface results from engineered geometry A double-sided chipbreaker tailored to this insert grade helps to break chips reliably in a range of cutting conditions, improving evacuation and surface finish during turning. The moderate corner radius and precisely defined relief angle allow operators to select feeds that balance strength and finish; the result is steady material removal rates and more predictable surface quality on steel components, even under moderate interruption. Practical benefits for workshop productivity and tool selection The insert’s square form and two usable cutting edges per side offer economical indexing, while the robust carbide construction supports higher cutting parameters when process stability permits. This leads to lower tooling costs per component and a higher productive time share of the machine. For mixed-production environments, the universal character of the grade simplifies tool inventory and reduces the need for multiple specialised grades. Contact Metav Werkzeuge for integration advice or to request technical data and sample quantities of the Tungaloy SNMG120404 T9225 insert Technical data Article number: 6780852 Manufacturer article number: 6780852 Manufacturer SKU: TUN6780852 SKU: 6780852-Tungaloy Name: SNMG120404 T9225 Tungaloy insert Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Angle: 90° Relief angle: 0° Special features Grade: T9225 (CVD-coated carbide) Double-sided chipbreaker Cylindrical hole ISO SNMG120404 form Application: turning FAQ What materials is this insert best suited for? The SNMG120404 T9225 insert is optimised for steel turning; the T9225 grade and CVD coating deliver a balance of wear resistance and toughness for medium to heavy steel applications. How does the chipbreaker affect machining? The double-sided chipbreaker on the insert supports reliable chip control and evacuation, which improves surface finish and reduces the likelihood of chip-related interruptions during turning. Is the insert compatible with standard SNMG holders? Yes—being ISO-form SNMG120404, the insert is compatible with holders that match the SNMG form, correct clearance, tolerance class, fastening type and thickness. How many cutting edges are available per insert? The square SNMG geometry offers multiple indexed cutting edges; the double-sided design increases the number of usable edges before disposal of the insert. Can this insert handle interrupted cuts? The T9225 grade provides sufficient toughness for slight to moderate interruptions; the insert’s resilience helps maintain edge integrity under varying engagement conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9225 Wendeplatten - Tungaloy
Combining a CVD-coated carbide grade T9225, a 90° square geometry with a 0.4 mm corner radius and a double-sided chipbreaker, this indexable insert delivers robust and repeatable performance for medium to heavy steel turning. Order the SNMG 120404 T9225 turning insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG 120404 T9225 Turning Insert — Tungaloy, CVD-coated Carbide The SNMG 120404 T9225 is an ISO square indexable insert for external and internal turning, engineered for stable cutting under varying engagement and slightly interrupted cuts. CVD-coated carbide for robust performance Universal T9225 grade for medium–heavy steel 90° square geometry, 0.4 mm corner radius Double-sided chipbreaker with cylindrical hole Stable performance in demanding turning operations The combination of a CVD-coated surface and a wear-resistant carbide substrate results in reliable tool life and consistent surface finish when machining steel. The T9225 grade is specified for medium to heavy cutting conditions and for applications where changing entry and exit conditions demand greater toughness. The insert’s heat-resistant coating reduces flank wear and adhesion, which leads to fewer interruptions for inspection or replacement and thus improves productivity. For shops seeking predictable tool-change intervals, the hardened coating and robust substrate offer measurable gains in process stability. Designed for quick mounting and secure clamping The insert follows ISO form SNMG120404, ensuring compatibility with standard ISO turning holders when matched for form, clearance angle and tolerance class. The central cylindrical hole supports positive clamping and simplifies indexing; being double-sided, the insert provides two usable cutting edges, improving cost-efficiency per edge. The square 90° geometry with a 0.4 mm corner radius provides strength at the cutting tip and helps maintain dimensional accuracy on shoulder and profiling operations. Compatibility should be checked against holder specifications, notably seat form and screw type, to ensure correct fit and repeatable clamping force. Practical benefits and selection guidance for process optimisation Selecting the correct chipbreaker and grade is central to performance: the double-sided chipbreaker on this insert balances chip control and edge robustness, reducing the risk of built-up edge under variable feeds. The SNMG 120404 insert is well suited for general turning, finishing and medium-heavy roughing of steel when moderate toughness is required. For high-temperature or very abrasive conditions, consider alternative coatings or grades; for aluminium or non-ferrous materials a different chipbreaker geometry may be preferable. For advice on feed, speed and depth of cut for specific machines and steels, Metav Werkzeuge’s technical team can assist with parameter recommendations and process optimisation. Contact Metav Werkzeuge for tailored recommendations on the Tungaloy SNMG 120404 T9225 turning insert and arrange technical consultation or sample supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6780816 SKU: 6780816-Tungaloy Manufacturer SKU: TUN6780816 Designation: SNMG120404 T9225 Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Insert angle: 90° Special features CVD-coated carbide (T9225) Double-sided chipbreaker Cylindrical centre hole Square insert form ISO indexable turning insert compatible with ISO holders Suitable for external and internal turning FAQ What materials is this insert intended for? The SNMG 120404 T9225 turning insert is specified for medium to heavy machining of steel; the T9225 CVD-coated carbide provides toughness and wear resistance suited to variable engagement. How is the insert clamped in the holder? Clamping uses the central cylindrical hole together with the appropriate ISO holder and screw; the insert’s ISO geometry ensures repeatable seating when matched to a compatible holder. How many cutting edges are available per insert? This is a double-sided insert offering two usable cutting edges per side, effectively increasing the number of edges available before disposal. Is the SNMG 120404 suitable for interrupted cuts? Yes, the T9225 grade is designed for robustness and can handle slightly interrupted cuts where toughness is required. Which parameters should be adjusted first to extend tool life? Reducing depth of cut or feed during unstable engagement and ensuring correct speeds for the material will extend life; Metav Werkzeuge can provide application-specific parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, a compact 0.4 mm corner radius and secure clamping for reliable turning performance in unstable conditions; order the SNMG120404 T9235 insert directly via Metav Werkzeuge or consult our specialists for application matching. SNMG 120404 T9235 Tungaloy indexable insert for turning — CVD-coated cemented carbide, 0.4 mm radius A SNMG120404 T9235 indexable turning insert designed for external and internal turning, suited to interrupted cuts and unstable machining conditions CVD-coated cemented carbide grade T9235 Square ISO insert SNMG 120404, 12 mm size 0.4 mm corner radius for stable cuts Double-sided chipbreaker, cylindrical hole Consistent machining performance for demanding steel turning The combination of a CVD-coated surface and a cemented carbide substrate in the T9235 grade provides a dependable compromise between wear resistance and toughness. This formulation is intended for machining steel at lower cutting speeds and in situations with interrupted cuts or less rigid set-ups, where edge robustness matters more than high-speed abrasion resistance. The result is stable chip formation and fewer unexpected tool failures, which supports predictable cycle times and reduced downtime in production. Clear compatibility and system requirements to avoid guesswork Produced to ISO dimensions, the insert is a square, 12 mm size with a 4.76 mm plate thickness and a 0° relief angle, featuring a cylindrical hole for screw mounting. Compatibility with a holder depends on form, relief angle, tolerance class, clamping method, size and thickness; selecting a matched external holder or boring bar together with the correct shim and clamp set ensures correct seating and torque transmission. The double-sided chipbreaker extends usable edge life by enabling indexing, while the 0.4 mm corner radius balances edge strength and surface finish for general-purpose turning. Practical selection and workshop benefits for efficient operation For workshop planning, choose the T9235 grade and an appropriate chipbreaker when working with steel where interruptions or instability are expected; this reduces the need for frequent tool changes and helps maintain process stability. The insert integrates into a system comprising an indexable insert, an appropriate external holder or boring bar, an underlay/clamp set and replacement screws. Technical support and application data are available to specify cutting parameters and optimise feed and depth for longer tool life and consistent surface quality. Contact Metav Werkzeuge for application advice and to secure matching holders and genuine Tungaloy SNMG120404 T9235 inserts, email info@metav-werkzeuge.com or call +49 2822 7131930 for precise recommendations Technical data Article number: 6786018 Manufacturer SKU: TUN6786018 Brand: Tungaloy Model series: ISO indexable turning inserts Designation: SNMG120404 T9235 Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Insert angle: 90° Special features Material: cemented carbide Coating: CVD Grade: T9235 Shape: square Hole: with cylindrical hole Chipbreaker: double-sided Typical application: external and internal turning System components: insert, holder/boring bar, shim/clamp set, replacement screws Compatibility criteria: form, relief angle, tolerance class, clamping, size, thickness FAQ What materials is this insert intended for? The SNMG120404 T9235 insert is specified for machining steel, with the T9235 grade optimised for lower cutting speeds and interrupted or unstable cutting conditions. How does the T9235 grade compare to wear-oriented grades? T9235 is a tougher, CVD-coated grade prioritising edge strength and resistance to chipping; it sacrifices some high-speed wear resistance in favour of reliability under interrupted cuts. Can the insert be used on both external and internal operations? Yes, the square SNMG120404 geometry with a 90° approach is suitable for both external turning and internal turning applications when paired with the correct holder or boring bar. What is the purpose of the cylindrical hole? The cylindrical hole permits secure screw clamping in standard indexable insert holders, ensuring repeatable seating and simplified inventory of replacement screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com