SNMG 120416 T6215 Wendeplatten - Tungaloy
High wear resistance and predictable edge performance from the T6215 grade support longer tool life and steady part quality; the CVD-coated carbide substrate and double-sided chipbreaker combine to deliver stable chip control when turning rostfreier Stahl. Order genuine inserts via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. SNMG120416 T6215 Tungaloy turning insert — CVD-coated carbide, 1.6 mm radius SNMG120416 is an ISO-conforming indexable insert for general turning, optimised for rostfreier Stahl under stable to slightly interrupted cutting conditions CVD-coated carbide grade T6215 Optimised for rostfreier Stahl turning Double-sided chipbreaker for stability ISO SNMG geometry, 1.6 mm corner radius Deliverable performance for consistent production The combination of a CVD-coated carbide substrate and the T6215 grade offers measurable improvements in wear resistance and edge stability. This results in fewer tool changes and more consistent component finish, which supports higher machine uptime and predictable cycle times. For workshops aiming to reduce variance in batch production, the insert’s wear characteristics translate directly into economic benefits through lower tooling consumption and reduced rework. Simple integration and secure clamping for faster set‑ups Designed to the ISO SNMG geometry, the insert matches standard square holders and is secured through the central cylindrical hole. Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; this standardisation enables rapid replacement and consistent clamping forces. The 1.6 mm corner radius and 0° relief angle contribute to reliable positioning and repeatable part geometry, reducing set‑up time and improving first‑part accuracy. Application-focused chip control and process reliability The double-sided chipbreaker suits external and internal turning where chip form and evacuation are critical. Matched with the T6215 grade, the insert performs well in stable to slightly interrupted cuts on rostfreier Stahl, delivering improved surface quality and reduced flank wear. Selecting the appropriate chipbreaker and matching the insert to the machine’s rigidity and cutting parameters will extend life and maintain productivity; for specialised tasks, the system approach—insert, holder, clamp set and correct torque—ensures reproducible results and safer operation. For process support and to source original Tungaloy SNMG120416 T6215 inserts, contact Metav Werkzeuge for technical advice and supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944808 Manufacturer SKU: TUN6944808 SKU: 6944808-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: SNMG120416 T6215 Tungaloy-Wendeplatte Core measurements Corner radius: 1.6 mm Thickness: 4.76 mm Insert size: 12 mm Clearance angle: 0° Included angle: 90° Features & applications Material: carbide Coating/grade: T6215 (CVD-coated) Shape: square indexable insert Hole: cylindrical hole Chipbreaker: double-sided Application: Turning (external and internal) Suitable for: rostfreier Stahl under stable to slightly interrupted cuts FAQ What materials is this insert best suited for? The SNMG120416 T6215 insert is designed primarily for machining rostfreier Stahl, offering wear resistance and stable cutting behaviour in that material group. How does the T6215 grade affect tool life? The T6215 grade uses a CVD-coated carbide substrate to reduce abrasive wear and maintain edge integrity, so the SNMG120416 insert typically achieves longer life and more consistent surface finish in appropriate applications. Which holder features are required for compatibility? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and thickness; the SNMG120416 follows ISO SNMG standards and fits holders designed for that geometry. Is the insert single- or double-sided and what does that mean for cost efficiency? The insert is double-sided with a chipbreaker on both faces, allowing the indexation of two cutting edges and improving cost efficiency by doubling the number of usable edges per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T6215 and the ISO-standard form for reliable turning of stainless steel; the combination of wear resistance and standard compatibility supports stable, productive machining. Order directly via Metav Werkzeuge or consult the technical team for holder compatibility and grades. SNMG120416 T6215 ISO turning insert for turning – CVD-coated carbide, 0° clearance (Tungaloy) A SNMG120416 T6215 insert designed for precision external and internal turning, optimised for machining stainless steel under stable to slightly interrupted cutting conditions. CVD-coated carbide for high wear resistance Designed for stainless steel machining 0° clearance for robust cutting performance Double-sided chipbreaker, square 12 mm size Consistent wear resistance for demanding turning operations The T6215 grade is a CVD-coated carbide developed for long tool life when machining stainless steel. Chemical vapour deposition (CVD) applies a hard, wear-resistant layer that reduces flank wear and improves edge stability at elevated temperatures. For turning applications that require reproducible performance, this coating supports longer intervals between indexing or replacement and helps maintain component tolerances over series production. The material choice delivers a clear advantage in environments where stability and predictable tool behaviour are decisive for throughput. ISO standard form and precise fit reduce setup time Standardisation matters in production: the insert follows the ISO standard form and dimensions, so holder compatibility is determined by shape, clearance, tolerance class, fastening, size and thickness. The square 12 mm plate format with a 4.76 mm thickness and a cylindrical hole simplifies selection of a matching external holder or boring bar. A 0° clearance angle and 90° plate geometry provide a robust cutting relationship for perpendicular facing and turning tasks. This clarity of specification reduces trial-and-error, shortens setup time and helps avoid unexpected stoppages on the shop floor. Effective chip control and predictable surface quality A double-sided chipbreaker designed into the geometry offers controlled chip formation across a range of feeds and depths of cut, improving evacuation and reducing the risk of entanglement in interrupted cuts. The 1.6 mm corner radius increases edge strength for heavier engagement and contributes to a stable cutting process with consistent surface finish. The SNMG120416 T6215 insert can be indexed to present fresh edges, which enhances economy per cutting edge and supports continuous production runs without compromising surface quality. Selecting the correct chipbreaker and grade for the workpiece material ensures efficient, repeatable results. For availability and tailored machining advice on the Tungaloy SNMG120416 T6215 insert, contact Metav Werkzeuge for application-specific recommendations and procurement support. Technical Data Article number: 6944781 Manufacturer: Tungaloy Manufacturer SKU: TUN6944781 SKU: 6944781-Tungaloy Model series: ISO-Drehwendeschneidplatten Core data Corner radius: 1.6 mm Thickness: 4.76 mm Plate size: 12 mm Clearance angle: 0° ISO designation: 120416 Included hole: with hole Plate form angle: 90° Design & features Square plate form Cylindrical hole Double-sided chipbreaker CVD-coated carbide, grade T6215 For turning (external and internal) Compatibility depends on holder form, clearance and tolerance class FAQ What materials is this insert suitable for? The SNMG120416 T6215 insert is specified for machining stainless steel; the CVD-coated carbide grade T6215 offers improved wear resistance when turning stainless steels. How does the ISO designation affect holder selection? ISO designation 120416 indicates form and size so that holders designed for SNMG inserts will be compatible provided the holder matches the clearance, tolerance class and fastening specified for the system. Can the insert be used for interrupted cuts? Yes, the T6215 grade and the 1.6 mm corner radius are intended for stable to slightly interrupted conditions, offering enhanced edge strength for occasional interruptions. Is chip control handled by the insert geometry or the machine settings? Chip control is primarily provided by the double-sided chipbreaker geometry; machine feed and speed settings should be adjusted to complement the insert geometry for optimal evacuation. How many cutting edges are available per insert? The square, double-sided design provides multiple indexable edges; indexing presents fresh edges to maintain productivity and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T9205 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9205 for extended tool life, ISO-compatible geometry for straightforward integration, and a robust 1.6 mm corner radius for reliable edge strength; order the SNMG120416 indexable insert directly from Metav Werkzeuge or consult the technical team for detailed process support. SNMG 120416 T9205 SNMG — Turning indexable insert by Tungaloy A SNMG120416 T9205 square indexable insert designed for productive turning of steel under stable machining conditions CVD-coated carbide grade T9205 Square insert, 90° geometry Double-sided with cylindrical hole 1.6 mm corner radius for robust edge Increased productivity through wear-resistant coating and grade control The combination of a CVD coating and a wear-resistant carbide substrate in grade T9205 is aimed at steady, high-volume turning operations. This configuration reduces flank and crater wear at higher cutting speeds, enabling longer uninterrupted cutting times and fewer insert changes. The result is improved process efficiency and predictable tool-life behaviour, which supports tighter production planning and lower overall machining costs. Simple integration into ISO tool systems for predictable results ISO standardisation ensures that the insert’s form, size and thickness are compatible with appropriate holders and toolblocks; the ISO designation and the square, 90° geometry make the component straightforward to fit. Compatibility is determined by form, clearance angle, tolerance class, mounting and thickness, so selection of a matching external holder, shim and clamp yields secure clamping and consistent chip flow. The presence of a cylindrical hole and standard fixing dimensions supports reliable seating and repeatable positioning. Operational benefits: durability, edge strength and process guidance A double-sided configuration doubles the number of usable cutting edges, offering economical edge rotation and reducing cost per cutting edge. The 1.6 mm corner radius provides a balance between edge strength and surface finish, especially for steel turning where moderate radii improve tool robustness without sacrificing dimensional control. For best performance select a rigid machine setup and a holder with sufficient overhang support, and match the chipbreaker style to the material and depth of cut for optimal chip control. For technical consultation on applying the Tungaloy T9205 grade in turning processes or to order compatible inserts and holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance and availability Technical data Article number: 6785743 Manufacturer SKU: TUN6785743 Model series: ISO-Drehwendeschneidplatten Article name: SNMG120416 T9205 Tungaloy-Wendeplatte Material: Hartmetall Application: Drehen Manufacturer item number: 6785743 Facts Thickness: 4.76 mm Size: 12 mm Corner radius: 1.6 mm Clearance angle: 0° Insert angle: 90° Hole: with hole (cylindrical) Special features ISO designation: SNMG120416 Grade: T9205 Coating type: CVD-coated carbide substrate Shape: square Chipbreaker: double-sided Hole style: cylindrical hole System components: insert, external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this indexable insert intended for? The insert is designed primarily for the productive turning of steel; the T9205 grade and CVD-coated carbide backing are optimised for stable steel machining at elevated cutting speeds. How is compatibility with tool holders ensured? Compatibility depends on ISO form, clearance angle, tolerance class, mounting, size and thickness; selecting a matching holder designed for SNMG inserts provides secure clamping and repeatable positioning. How many cutting edges are available on the insert? This is a double-sided square insert, which provides multiple usable edges to rotate after wear and thereby reduces the cost per edge in batch production. Which chipbreaker should be selected for this grade? Choose a chipbreaker that matches the workpiece material, cutting parameters and machine rigidity; pairing the T9205 grade with an appropriate breaker improves chip control and surface finish. Is the SNMG120416 suitable for finishing and roughing operations? The 1.6 mm corner radius and grade characteristics favour robust finishing and general-purpose turning in stable setups; for heavy roughing, consider inserts with larger radii or grades specified for interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215, a robust SNMG 120416 ISO form and a 1.6 mm corner radius for steady productivity and predictable tool life; order the SNMG120416 T9215 directly via Metav Werkzeuge or request application advice from our consultants. SNMG 120416 T9215 turning insert by Tungaloy — CVD-coated carbide, 1.6 mm radius The SNMG120416 T9215 is a square ISO turning insert intended for medium steel machining, combining a CVD-coated carbide grade with a stable chip control geometry for continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 ISO SNMG 120416, 90° square Double-sided chipbreaker for reliable edges Cylindrical hole; 4.76 mm plate thickness Boosted throughput for medium steel turning The choice of a CVD-coated carbide grade like T9215 delivers a clear advantage in the machining of medium steel: enhanced wear resistance and improved fracture toughness support longer tool life under sustained cutting conditions. This grade is engineered for production environments where consistent cycle times and repeatable performance matter. The composition and coating combine to reduce flank wear progression and maintain cutting-edge integrity, which translates into fewer tool changes and higher overall productivity on turning lines. Secure clamping and repeatable positioning reduce setup time An ISO SNMG geometry with a 90° square form and a cylindrical hole ensures reliable mechanical location in compatible holders. The insert thickness of 4.76 mm and the 1.6 mm corner radius provide a stable cutting edge suited to general turning tasks, while the double-sided chipbreaker gives two effective cutting edges per index, improving economy per insert. Designed tolerance classes and the standardised form simplify holder selection and reduce the need for individual adjustment, so clamping is dependable and repeatability between tool changes is high. Practical application guidance for stable results Intended for both external and internal turning, the indexable insert performs best in continuous to slightly interrupted cuts when paired with a holder and chipbreaker matched to the workpiece and process stability. The system approach — insert plus appropriate external holder, underlay/clamping set and fasteners — enables straightforward assembly and predictable results. Selecting the correct chipbreaker and machining parameters for medium steel will yield stable chip control and improved surface quality, supporting cost-effective mass production or small-batch runs that demand consistency. Contact Metav Werkzeuge for tailored machining recommendations on Tungaloy turning inserts and to arrange prompt supply of SNMG120416 T9215 for your production needs Technical data Article number: 6772294 Manufacturer SKU: TUN6772294 Brand: Tungaloy Model series: ISO turning indexable inserts Type designation: SNMG120416 Grade: T9215 Material: carbide (CVD-coated) Facts Corner radius: 1.6 mm Plate thickness: 4.76 mm Plate size: 12 mm Clearance angle: 0° Insert angle: 90° Hole style: cylindrical hole Special features ISO SNMG form, square insert Double-sided chipbreaker Suitable for continuous to slightly interrupted cuts Designed for medium steel machining Compatible with standard external holders and boring bars System includes insert, holder, underlay/clamping set and standard screws FAQ What materials is this insert designed for? The SNMG120416 T9215 insert is specified for medium steel machining; the CVD-coated carbide grade supports high wear resistance and good toughness for this material group. How does the double-sided chipbreaker benefit production? A double-sided chipbreaker provides two cutting edges per index, improving edge economy and enabling rapid index changes for reduced downtime in serial turning operations. Which holder features are required for correct compatibility? Compatibility depends on form, clearance angle, tolerance class, fixation method, size and thickness; the SNMG120416 form fits standard SNMG external holders and boring bars with a matching seat and screw/clamp arrangement. Is the grade suitable for interrupted cuts? The T9215 grade is intended for continuous to slightly interrupted cuts, offering balanced wear resistance and breakage safety for stable processes. What is the insert thickness and hole style? The insert has a plate thickness of 4.76 mm and is supplied with a cylindrical hole for screw clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T9215 Wendeplatten - Tungaloy
Benefit from the combination of T9215 CVD-coated carbide, robust 90° geometry and a 1.6 mm corner radius to increase productivity and maintain process stability in medium-steel turning. Order the SNMG120416 insert directly via Metav Werkzeuge or ask our consultants for tailored application advice. SNMG120416 T9215 – indexable turning insert, CVD-coated carbide, 90° geometry (Tungaloy) SNMG120416 T9215 is an ISO-design insert for external and internal turning, optimised for medium-steel machining with a balance of wear resistance and fracture toughness SNMG120416 square insert, 12 mm size CVD-coated carbide T9215 for medium steel Double-sided chipbreaker, with cylindrical hole 90° geometry, 1.6 mm corner radius Consistent productivity through material and geometry The T9215 grade is a CVD-coated carbide engineered for medium steel applications; it combines elevated wear resistance with reliable fracture toughness, making it suitable for long production runs and instances of light interruption. The 90° geometry and 1.6 mm corner radius provide predictable shoulder accuracy and stable cutting forces, which reduces vibration and leads to longer tool life under consistent cutting conditions. This contributes directly to higher output and fewer index changes on the shop floor. Predictable fit and straightforward system integration Being an ISO insert, dimensional conformity is central to correct function: compatibility depends on form, relief angle (0°), tolerance class, fastening method, size and thickness. The standardised dimensions simplify selection of a matching external holder or boring bar and the corresponding shim/clamp set. As a result, toolset-up time is reduced and interchangeability between machines is improved, supporting leaner workflows and easier inventory management. Reliable chip control for improved surface quality The double-sided chipbreaker design with a cylindrical hole ensures repeatable chip formation and evacuation, which helps to maintain a consistent surface finish in turning operations. The CVD coating reduces built-up edge and abrasion on the cutting land, translating to steady dimensional accuracy and fewer reworks. For customers aiming for dependable part quality, this insert produces stable results when paired with an appropriately rated holder and cutting data. Practical recommendations for application and handling Use the insert with a holder that matches the SNMG form and ISO designation to guarantee correct clamping and positive seating. The insert’s double-sided configuration makes it indexable, allowing both faces to be used and improving cost efficiency per cutting edge. Select the chipbreaker and grade according to workpiece material, cutting strategy and machine stability; for medium-steel turning choose feeds and speeds that leverage the T9215 balance of wear resistance and toughness to extend life while preserving productive cutting rates. For reliable medium-steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for stock information and application recommendations. Technical data Article number: 6796090 Manufacturer SKU: TUN6796090 Designation: SNMG120416 Brand: Tungaloy Model series: ISO turning indexable inserts Material: Carbide Facts Corner radius: 1.6 mm Geometry angle: 90° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Special features Grade/coating: T9215, CVD-coated carbide Chipbreaker: double-sided Hole: with hole Hole style: cylindrical hole Plate form: square Application: Turning (external and internal) FAQ Which materials suit this insert best? The SNMG120416 insert in T9215 grade is intended primarily for medium-steel machining and offers a good compromise between wear resistance and toughness for continuous to lightly interrupted cuts. Is the insert indexable and how many sides are usable? Yes, the SNMG120416 is double-sided and indexable; both faces can be used, which increases the number of available cutting edges per insert and improves cost efficiency. How does the T9215 grade influence cutting performance? T9215 is a CVD-coated carbide grade that enhances wear resistance while preserving fracture toughness, so the insert delivers stable cutting performance and longer life in medium-steel applications. What must be checked to ensure holder compatibility? Compatibility is determined by insert form, relief angle (0°), tolerance, fastening and size; using the ISO designation SNMG120416 ensures that holders and clamp sets designed for this form will seat the insert correctly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and a double-sided chipbreaker to boost productivity in medium steel turning; the ISO-compatible geometry ensures reliable fitment and repeatable results — order the insert via Metav Werkzeuge or contact the consultants for technical support. SNMG 120416 T9215 SNMG120416 Tungaloy turning insert for turning The SNMG120416 T9215 is an ISO-standard square turning insert engineered for medium steel machining, offering a blend of wear resistance and fracture toughness for continuous to lightly interrupted cuts. CVD-coated carbide for high wear resistance Optimised for medium steel machining Double-sided chipbreaker, square 12 mm size Cylindrical hole, 90° geometry, 1.6 mm radius Increase throughput with a CVD-coated carbide grade that lasts The CVD-coated carbide substrate of this grade T9215 provides a clear productivity advantage for medium steel applications by combining elevated wear resistance with good fracture toughness. In practice, this means longer uninterrupted cutting intervals and fewer insert changes during production runs. The composition is tailored for continuous to slightly interrupted cuts, ensuring edge stability under steady loads while still coping with minor interruptions in the chip flow. For operations focused on cycle-time reduction and predictable tool life, the material and coating pairing delivers measurable gains in machining efficiency. Consistent fitment and rigidity thanks to ISO conformity Adherence to ISO dimensions makes the insert straightforward to integrate into established tooling systems. Compatibility to a specific holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness — factors the insert conforms to by design. The 90° cutting-edge geometry and square form offer robust support in the pocket, which reduces deflection during facing or external turning and helps maintain dimensional accuracy. When paired with a matching clamping set and an appropriate external holder or boring bar, the assembly produces repeatable results and simplifies inventory management across multiple machines. Reliable chip control and predictable surface quality The double-sided chipbreaker and cylindrical hole support stable clamping and effective chip formation, which reduces the risk of chip entanglement and improves surface finish on turned components. A corner radius of 1.6 mm balances edge strength with the ability to create a clean profile on the workpiece; this radius is advantageous for general external and internal turning tasks where a smooth transition and resistance to chipping are required. The system approach — ISO insert, matching holder or boring bar, shim/clamping set and replacement screws — ensures that the insert can be deployed quickly and returned to service with minimal downtime when a swap is needed. For specific advice on using the Tungaloy SNMG120416 T9215 in production, or to check availability and lead times with Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6944784 SKU: 6944784-Tungaloy Manufacturer SKU: TUN6944784 Model series: ISO turning indexable inserts Label: SNMG120416 T9215 Tungaloy-Wendeplatte Material: carbide Facts Corner radius: 1.6 mm Insert size: 12 mm Plate thickness: 4.76 mm Clearance angle: 0° Geometry angle: 90° Special features Grade: T9215 Coating: CVD-coated Shape: square Chipbreaker: double-sided Hole: with cylindrical hole Typical application: turning (external and internal) System assembly: insert, matching holder/boring bar, shim/clamping set, replacement screws FAQ What materials is this insert best suited for? The SNMG120416 T9215 is optimised for medium steel machining; the T9215 grade and CVD coating combine to offer high wear resistance for continuous to lightly interrupted cuts. How does the ISO conformity help in tool selection? ISO-standard dimensions mean the insert fits a wide range of compatible holders; compatibility depends on shape, clearance angle, tolerance class, fastening, size and thickness so matching the holder to those parameters ensures correct fitment. Does the insert offer effective chip control? Yes, the double-sided chipbreaker is designed to promote stable chip formation and evacuation, improving surface finish and minimising the risk of chip-related issues during turning. How many usable cutting edges are there on this insert? The insert is double-sided, allowing reversible use of the cutting edges as part of the system strategy; this contributes to economical edge usage and reduced replacement frequency. What system components are required for correct mounting? A complete system typically consists of the ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws to ensure secure, repeatable mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T9215 Wendeplatten - Tungaloy
Take advantage of the T9215 grade's combination of high wear resistance and fracture toughness together with a compact 1.6 mm corner radius for reliable productivity in medium-steel turning; order original inserts via Metav Werkzeuge or consult their technical team for application-specific recommendations. SNMG120416 T9215 Tungaloy turning insert — ISO insert for turning applications SNMG120416 T9215 Tungaloy turning insert is an ISO‑standard, square indexable insert designed for external and internal turning in medium‑steel machining. CVD-coated carbide T9215 High wear resistance and toughness For medium steel turning applications Double-sided chipbreaker with cylindrical hole Reliable performance for medium steel turning The CVD‑coated carbide grade T9215 combines elevated wear resistance with good fracture toughness, making it especially suitable for productive, continuous to lightly interrupted turning operations in medium‑strength steel. The coating reduces flank wear and extends edge life under stable cutting conditions, which translates into longer tool life and fewer indexings. This grade is optimised for a balance between abrasion resistance and edge stability, enabling higher material removal rates where consistent surface quality and repeatable part tolerance are priorities. Clear design features and holder compatibility The ISO designation indicates a square plate with the common SNMG form and the specific size code 120416, which corresponds to a nominal 12 mm plate size, 4.76 mm thickness and a 1.6 mm corner radius. The insert has a 0° rake angle and a 90° included angle, with a cylindrical central hole for secure clamping. Compatibility with a toolholder is determined by the insert form, relief angle, tolerance class, fixing method, size and thickness; matching these parameters to the holder ensures correct seating and repeatable positioning. SNMG120416 inserts therefore integrate into standard ISO turning systems with the appropriate clamping kit and screw. Effective chip control and machining stability A double‑sided chipbreaker provides controlled chip formation on each index, helping to maintain process stability and reduce the risk of chip entanglement. This characteristic supports efficient machining in continuous cuts and short, lightly interrupted cycles, improving surface finish and reducing cycle time. Choosing the correct chipbreaker geometry and matching the T9215 grade to the workpiece material and cutting parameters will maximise tool life and deliver consistent production results. For operations with heavier interruptions or atypical alloy compositions, selection of an alternative chipformer or grade should be considered. Contact Metav Werkzeuge for original Tungaloy inserts and tailored machining advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772299 SKU: 6772299-Tungaloy Manufacturer SKU: TUN6772299 Model series: ISO-Drehwendeschneidplatten ISO designation: SNMG120416 Facts Corner radius: 1.6 mm Plate size: 12 mm Plate thickness: 4.76 mm Rake angle: 0° Included angle: 90° Hole: cylindrical Special features Coating / grade: T9215 (CVD-coated carbide) Material: carbide Chipbreaker: double-sided Plate form: square Application: turning (external and internal) Compatibility: ISO turning holders and clamping sets FAQ What materials is this insert best suited for? The SNMG120416 T9215 Tungaloy insert is optimised for medium‑strength steel machining, offering a balance of wear resistance and toughness suitable for productive turning operations. Can the SNMG120416 be used for interrupted cuts? Yes, the T9215 grade tolerates light to moderate interruptions thanks to its fracture‑resistant edge, but heavy interruptions may require a different grade or reinforced cutting strategy. How is the insert secured in the holder? The insert is designed for ISO‑compatible holders and is clamped via its cylindrical central hole; correct holder geometry, tolerance and clamping hardware ensure stable seating and repeatable positioning. Does the double‑sided chipbreaker affect indexability? The double‑sided chipbreaker provides two usable cutting edges per indexing position, enabling predictable chip control and more efficient use of the insert before regrind or disposal. Which cutting conditions maximise tool life with this grade? Using stable cutting parameters with steady feed and optimised cutting speed for medium steel, combined with appropriate coolant or minimum quantity lubrication, will extend the life of the SNMG120416 T9215 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T9225 Wendeplatten - Tungaloy
The combination of a CVD‑coated carbide grade and an ISO SNMG geometry delivers reliable cutting performance and stable chip control for medium to heavy steel turning; order directly via Metav Werkzeuge or consult the team for compatibility and tooling advice. SNMG120416 T9225 Turning Insert by Tungaloy — CVD‑coated carbide, universal grade for medium‑heavy steel The SNMG120416 T9225 Tungaloy insert is an ISO‑standard square indexable insert designed for external and internal turning in variable engagement conditions where a robust, tough grade is required. CVD‑coated carbide for robust machining Universal grade T9225 for medium‑heavy steel Double‑sided chipbreaker for versatile cutting Square ISO insert SNMG120416 with 1.6 mm radius Consistent performance under variable conditions The CVD‑coated T9225 grade is formulated as a robust universal solution for the machining of medium to heavy steels, providing a balanced combination of toughness and wear resistance. Its coating enhances thermal stability at higher cutting speeds and improves chip control, which reduces downstream handling and inspection time. Where cuts are slightly interrupted or engagement varies, the grade’s increased fracture resistance supports steady tool life, so process interruptions and unexpected edge failures are minimised. Easy integration into standard tool systems Compatibility is governed by established ISO parameters: form, relief angle, tolerance class, fastening, size and thickness. The SNMG geometry is recognised worldwide and is supplied with a cylindrical hole for secure clamping. The insert’s square form and indexable design permit multiple edge uses per blank, lowering tooling cost per edge. For toolrooms and production lines, this standardised approach simplifies holder selection and spares management while ensuring repeatable positioning and clamping rigidity. Application guidance for reliable outcomes The insert’s 1.6 mm corner radius and 90° included angle suit a wide range of external and internal turning tasks, from profile work to general facing operations. The double‑sided chipbreaker arrangement allows quick indexing to a fresh edge, improving uptime. Selection of the appropriate chipbreaker and cutting parameters should be matched to component material, machining stability and part geometry; in less rigid setups the emphasis should be on feed and depth moderation to exploit the grade’s toughness without overloading the edge. Durability, cost efficiency and process security Thanks to its combination of substrate and CVD coating, the insert is engineered for extended tool life and predictable wear progression, supporting higher productivity and reduced regrinding or replacement frequency. The ISO standardisation and double‑sided format contribute to lower inventory complexity and improved economic efficiency across production runs. Proven machining behaviour and controlled chips promote safer handling and consistent surface finish, which together sustain throughput and quality objectives. For dependable medium‑to‑heavy steel turning with Tungaloy’s T9225 grade, contact Metav Werkzeuge for tailored advice and fast supply — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930. Technical data Manufacturer article number: 6780973 Distributor SKU: 6780973-Tungaloy Manufacturer SKU: TUN6780973 Designation: SNMG120416 Key measurements Corner radius: 1.6 mm Insert size: 12 mm Thickness: 4.76 mm Relief angle: 0° Included angle: 90° Features & suitability Material: carbide Coating: CVD Grade: T9225 Chipbreaker: double‑sided Hole: cylindrical Geometry: square, indexable ISO insert Application: turning (external and internal) FAQ Which materials is this insert suited for? The SNMG120416 T9225 Tungaloy insert is optimised for medium to heavy steel machining; the T9225 grade offers the toughness required for variable engagement and slightly interrupted cuts. Can the insert be used for internal turning operations? Yes; the ISO SNMG geometry and cylindrical hole allow use in appropriate internal holders, provided holder form, clearance and stability match the insert’s dimensions and cutting conditions. What does the T9225 grade indicate? T9225 denotes a CVD‑coated carbide grade designed as a universal option for robust performance in medium‑heavy steel applications, combining wear resistance with enhanced fracture toughness. How is the insert mounted and indexed? Mounting follows ISO standards: the insert is secured via the central cylindrical hole; being double‑sided and square, it can be indexed to present fresh cutting edges, reducing tooling cost per edge. What cutting geometry should be chosen for finishing vs roughing? A larger feed and deeper cut exploit the grade’s toughness for roughing, while smaller depths and finer feeds improve surface finish for finishing. Choose the chipbreaker and parameters according to workpiece material and machine rigidity. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120416 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, a double-sided chipbreaker and ISO compatibility for consistent medium to heavy steel turning; order directly via Metav Werkzeuge or contact our consultants for application advice. SNMG 120416 T9225 — SNMG turning insert for medium to heavy steel by Tungaloy SNMG 120416 T9225 is an ISO-standard SNMG turning insert designed for demanding turning tasks, offering CVD-coated carbide and a double-sided chipbreaker for enhanced stability. CVD-coated carbide for improved wear resistance Robust universal grade T9225 for steel turning Double-sided chipbreaker for stability and versatility 1.6 mm corner radius, square 12 mm form Increased process reliability and tool life through optimised grade and coating The combination of a CVD-coated carbide substrate and the T9225 grade delivers a balance of wear resistance and toughness that suits interrupted or variable cuts common in heavy turning operations. This construction reduces flank and crater wear under higher loads, which translates into longer tool life and fewer indexings. Customers benefit from predictable performance when machining a wide range of steels, since the grade is formulated for medium to heavy-duty turning. The clear outcome is improved uptime and fewer unscheduled tool changes, enhancing overall production efficiency. Predictable chip control and geometric advantages for stable turning Built with a double-sided chipbreaker and a 1.6 mm corner radius, the insert promotes consistent chip formation and evacuation during external and internal turning. The chipbreaker geometry is matched to the grade to avoid excessive build-up or unstable chips, especially when conditions vary. The square 12 mm form and the central cylindrical hole support secure clamping in ISO-compatible holders; compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness. These geometric features help maintain surface finish and dimensional stability while allowing operators to focus on process parameters rather than constant tool adjustments. Simple integration and clear system benefits for workshop use The ISO-standard design ensures straightforward integration into existing clamping systems when the holder and clamping hardware correspond to the insert’s form and thickness. The insert’s 0° relief angle and 4.76 mm thickness make it suitable for many common SNMG holder designs, while the central hole supports reliable fixation with established screws and underplates. Because the insert is double-sided, stock usage is economical; rotating the insert yields additional usable edges, reducing per-edge cost in high-volume environments. For workshops seeking a pragmatic, production-oriented solution, this insert balances durability, versatility and straightforward handling. Contact Metav Werkzeuge for tailored machining recommendations on Tungaloy turning inserts and quote reference SKU TUN6944785 for fast assistance; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944785 Manufacturer SKU: TUN6944785 Series: ISO-Drehwendeschneidplatten Designation: SNMG120416 Grade/coating: T9225 (CVD-coated) Material: Hartmetall Application: Turning Facts Corner radius: 1.6 mm Relief angle: 0° Thickness: 4.76 mm Size: 12 mm Included hole style: Cylindrical Special features ISO-standard SNMG insert Double-sided chipbreaker Square 12 mm plate form Cylindrical central hole for secure clamping Robust universal grade for medium to heavy steel turning FAQ What materials is this insert suitable for? The SNMG 120416 T9225 insert is formulated primarily for steel turning, offering good performance in medium to heavy-duty machining tasks. How does the T9225 grade affect performance? The T9225 CVD-coated grade combines wear resistance with toughness, providing stable cutting under variable engagement and slightly interrupted cuts typical of turning operations. Which holders are compatible with this insert? Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; the insert fits ISO-compatible SNMG holders that match these parameters. What benefit does the double-sided chipbreaker provide? The double-sided chipbreaker offers consistent chip control and process stability, improving surface finish and reducing the risk of chip-related interruptions in turning. What is the correct reference to order or specify this insert? Use SKU TUN6944785 or article number 6944785 and the designation SNMG120416 T9225 when specifying or ordering the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T9225 Wendeplatten - Tungaloy
Benefit from a combination of CVD‑coated carbide T9225, a square SNMG120416 geometry with a 1.6 mm corner radius, and ISO compatibility for consistent medium‑to‑heavy steel turning; order the insert directly via Metav Werkzeuge or consult our specialists if assistance is required. SNMG 120416 T9225 ISO turning insert by Tungaloy — CVD-coated carbide, square 90° The SNMG120416 T9225 Tungaloy insert is an ISO‑standard, square, double‑sided indexable insert designed for external and internal turning, optimised for medium to heavy steel machining where toughness and reliable chip control are required. CVD-coated carbide grade T9225 Robust universal grade for steel machining Double-sided chipbreaker, square 90° shape Cylindrical hole for secure clamping Consistent cutting performance for demanding steel work The CVD‑coated carbide of grade T9225 provides a balanced combination of wear resistance and toughness, making it suitable for variable engagement and slightly interrupted cuts in steel. The coating improves thermal stability and reduces flank wear, which translates into longer tool life under medium‑to‑heavy turning conditions. This results in stable production cycles and fewer insert changes, supporting continuous machining processes with predictable outcomes. Secure seating and repeatable indexing for accurate turning Designed to the ISO standard, the insert’s square 90° form and cylindrical hole guarantee straightforward mechanical compatibility with a wide range of holders and boring bars when matched by form, clearance angle and tolerance class. The standardised geometry ensures repeatable seating and simple indexing, which helps maintain consistent workpiece dimensions across batches and reduces setup time during tool changes. Effective chip control and edge security where it matters The double‑sided chipbreaker and 1.6 mm corner radius combine to deliver robust chip formation and controlled evacuation when machining steel. The chipformer geometry is selected to balance shear stability and surface finish: a larger radius improves edge strength for heavier cuts, while the chipbreaker design aids safe chip flow under varying cut conditions. This means fewer interruptions for chip management and a more secure cutting edge during tougher cuts. Practical handling, grade selection and cost efficiency Manufactured from solid carbide and with a plate thickness of 4.76 mm, the insert offers mechanical rigidity for demanding turning operations while remaining easy to index and replace. The universal character of the T9225 grade simplifies inventory by covering a broad range of steel types and operating conditions, reducing the need for multiple specialised grades. Choosing this insert supports productive machining with an emphasis on process stability and predictable tool life. For applications requiring reliable medium‑to‑heavy turning, contact Metav Werkzeuge for availability and advice — our technical team at Metav Werkzeuge can assist with holder compatibility and selection: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6796091 Manufacturer SKU: TUN6796091 SKU: 6796091-Tungaloy Article name: SNMG120416 T9225 Tungaloy insert Numbers / Core technical data Corner radius: 1.6 mm Relief angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Geometry code: 120416 Manufacturer article number: 6796091 Special features Material: carbide Coating: CVD Grade: T9225 (robust universal for steel) Plate form: square, 90° shape Chipbreaker: double‑sided Hole style: cylindrical Typical application: external and internal turning System composition: ISO insert, matching holder or bar, clamping pad and fastening screws FAQ What materials is this insert suitable for? The SNMG120416 T9225 insert is specified for steel machining, with the T9225 grade engineered as a robust universal solution for medium‑to‑heavy steel turning. Which geometry and mounting features does the insert offer? This ISO‑standard insert has a square 90° geometry with a cylindrical hole for secure clamping and a 0° relief angle, ensuring compatibility with standard square turning holders. How does the chipbreaker affect machining? The double‑sided chipbreaker promotes controlled chip formation and evacuation during turning, improving process stability and helping to maintain a reliable cutting edge under varying engagement conditions. What is the corner radius and why does it matter? The insert has a 1.6 mm corner radius, which increases edge strength for heavier cuts and contributes to a uniform surface finish when used in appropriate turning strategies. Is this an indexable and reversible insert? Yes, the SNMG120416 is double‑sided and indexable; its design allows rotation to a fresh cutting edge, supporting economical use and reduced tooling downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120416 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade that delivers stable performance in medium‑to‑heavy steel turning while the SNMG form and ISO compatibility simplify integration into existing tool systems; order the insert via Metav Werkzeuge or consult our technical team for application advice. SNMG 120416 T9225 SNMG120416 — Tungaloy ISO turning insert for turning A SNMG120416 T9225 ISO turning insert designed for medium‑to‑heavy steel turning, offering a robust CVD‑coated carbide grade and a 1.6 mm corner radius for stable cutting under variable engagement conditions CVD-coated carbide grade T9225 Robust universal grade for steel turning Square SNMG 12 x 12 mm, 4.76 mm thick 1.6 mm corner radius, 90° cutting angle Consistent productivity for medium‑to‑heavy steel turning The T9225 grade is a CVD‑coated carbide developed for productive machining when conditions demand extra toughness. Its composition favours stable chip formation and resistance to edge chipping during slightly interrupted cuts, which translates into longer effective tool life and fewer insert changes. As an ISO‑compliant turning insert, the geometry and tolerances are standardised so that process planners can rely on predictable cutting behaviour and repeatable performance across compatible holders and tool systems. Precise fit and secure clamping for reliable operation Compatibility with an insert holder depends on the form, relief angle, tolerance class, fastening method, size and thickness; the square SNMG form and the cylindrical hole design of this insert ensure secure mounting and repeatable positioning. The 0° clearance and the 90° cutting angle permit accurate facing and shoulder operations while maintaining a reliable seating in the clamping pocket. This mechanical predictability reduces setup time and contributes directly to process stability on batch and single‑piece production. Practical economy through geometry and chip control The double‑sided chipbreaker and the square shape provide multiple usable edges per insert, improving cost efficiency in series production. The 1.6 mm corner radius increases strength at the cutting edge, making the insert suitable for heavier cuts and roughing passes where durability matters. At the same time, the CVD coating supports consistent surface quality for follow‑on operations. Select the chipbreaker and grade to match the workpiece material and stability of the setup to achieve the best balance between material removal rate and edge life. For application guidance or to order Tungaloy SNMG120416 T9225 inserts through Metav Werkzeuge, contact our technical consultants at Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Manufacturer article number: 6780925 Manufacturer SKU: TUN6780925 Metav SKU: 6780925-Tungaloy Designation: SNMG120416 Grade: T9225 Substrate/coating: CVD-coated carbide Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Cutting angle: 90° Relief angle: 0° Special features Application: Turning Square insert form Double-sided chipbreaker Cylindrical mounting hole ISO-compliant turning insert Material: carbide FAQ What materials is this insert suited for? The Tungaloy T9225 grade is intended primarily for medium‑to‑heavy steel turning; the CVD‑coated carbide substrate provides toughness for variable engagement and slightly interrupted cuts. Is the SNMG120416 compatible with standard ISO holders? Yes, SNMG120416 is an ISO‑compliant turning insert; compatibility with a specific holder is determined by insert form, relief angle, tolerance class, fastening method, size and thickness. What advantages does the T9225 grade offer? Tungaloy T9225 offers a robust, CVD‑coated carbide formulation that improves edge strength and wear resistance under mixed cutting conditions, supporting stable machining and longer edge life. How does the 1.6 mm corner radius influence cutting? A 1.6 mm corner radius increases edge robustness and favours heavier cuts and roughing passes; it helps reduce chipping risk compared with smaller radii while giving acceptable surface results for many operations. What mounting and chip control features are included? The insert features a cylindrical hole for secure clamping and a double‑sided chipbreaker to manage chips across a range of feeds and depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T9235 Wendeplatten - Tungaloy
Benefit from a robust CVD‑coated T9235 grade and the proven ISO SNMG120416 geometry for reliable turning under interrupted cuts and unstable conditions; the square, 90° form with a 1.6 mm corner radius delivers consistent edge engagement and reduced vibration. Order the SNMG120416 T9235 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG 120416 T9235 Turning insert by Tungaloy SNMG 120416 T9235 is an ISO‑format square indexable insert for general turning applications, optimised for interrupted cuts and unstable machining of steel. ISO‑standard SNMG geometry CVD‑coated carbide T9235 for steel 90° square, 1.6 mm corner radius Double‑sided insert with cylindrical hole Predictable performance in interrupted turning The ISO SNMG120416 shape provides a stable cutting geometry that reduces chatter when machining under variable engagement. The CVD‑coated cemented carbide grade T9235 is formulated for toughness at moderate cutting speeds, making it suitable where chip control and edge stability are critical. By combining a square, 90° insert form with a 1.6 mm corner radius, the insert maintains consistent contact at the workpiece, which supports longer cutting intervals and fewer unplanned tool changes. This results in a measurable productivity gain on short, frequent cuts and in less stable set‑ups. Straightforward holder compatibility and secure clamping Compatibility with toolholders depends on form, clearance angle, tolerance class, fastening, size and thickness; the SNMG family is widely supported across ISO‑compliant external holders and boring bars. The insert is double‑sided and supplied with a cylindrical hole, allowing secure clamping and straightforward rotation for index changes. Clear dimensional data and an ISO designation simplify tool selection and inventory management, reducing set‑up time and minimising machining downtime through faster exchange procedures. Robust grade and adaptable chip control The T9235 grade offers a balance of toughness and wear resistance for machining steel in interrupted and less stable conditions. The coated substrate delivers improved resistance to abrasive wear while prioritising edge security under shock loading. The integrated chipbreaker on both sides supports predictable chip formation, which eases evacuation in external and internal turning tasks. For shops aiming to maintain consistent surface quality and repeatability, the insert’s construction helps achieve reliable results with modest process parameters. Practical notes for selection and use The insert is intended for turning operations where stability is limited or cuts are interrupted; choose a chipbreaker and grade to match the workpiece material and machining strategy. The indexable insert architecture means spare parts handling is simplified and effective stock rotation is possible. Technical advice is available for matching holder style and clearance requirements; application parameters should be chosen according to machine rigidity and workholding to make the most of the insert’s CVD‑coated T9235 properties. Contact Metav Werkzeuge for tailored advice on SNMG 120416 T9235 selection and availability, or request application guidance from our consultants at Metav Werkzeuge Technical Data Article number: 6785838 Manufacturer SKU: TUN6785838 SKU: 6785838-Tungaloy Product designation: SNMG120416 T9235 Tungaloy insert Facts Geometry: SNMG120416 Corner radius: 1.6 mm Included hole: with hole (cylindrical) Shape: square, 90° Thickness: 4.76 mm Size: 12 mm Special features Material: cemented carbide Coating/type: CVD‑coated carbide grade T9235 Clamping: central hole, cylindrical style Sidedness: double‑sided with chipbreaker Typical application: turning (external and internal) Series: ISO turning indexable inserts FAQ What materials is this insert best suited for? The SNMG120416 T9235 insert is optimised for machining steel; the T9235 grade offers toughness suited to interrupted cuts and variable conditions. Is the insert reversible and how is it clamped? This is a double‑sided indexable insert with a cylindrical hole for central clamping, allowing rotation and reuse of the second cutting edge. Which holder types are compatible with the SNMG geometry? ISO‑compliant SNMG holders and boring bars designed for square inserts are compatible; selection depends on form, clearance, tolerance class and fastening arrangement. How does the CVD coating affect performance? The CVD‑coated layer improves abrasive wear resistance while the T9235 substrate maintains toughness, resulting in reliable edge integrity under interrupted machining. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6785838 and the SKU is 6785838‑Tungaloy; the manufacturer SKU is TUN6785838. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T9235 Wendeplatten - Tungaloy
Combining the CVD‑coated T9235 carbide grade with the ISO SNMG 120416 form and a 1.6 mm corner radius yields reliable performance for unstable and interrupted turning operations; order the insert via Metav Werkzeuge or contact our technical advisers for suitability checks. SNMG 120416 T9235 — ISO indexable turning insert for turning by Tungaloy The SNMG120416 T9235 is an ISO‑standard indexable turning insert designed for external and internal turning, offering a 90° square form, a 1.6 mm corner radius and a central cylindrical hole for secure clamping. ISO SNMG 120416 form, 90° square insert CVD-coated T9235 carbide grade Double-sided chipbreaker for stable cuts Central cylindrical hole, 4.76 mm plate thickness Consistent cutting under unstable conditions thanks to a tough CVD grade The CVD‑coated T9235 composition provides a tough cemented carbide substrate optimised for machining steel at moderate cutting speeds and where interrupted cuts or less rigid set‑ups occur. This coating strategy improves edge resistance to chipping and abrasion, which translates into prolonged tool life and fewer unplanned tool changes. The result is more predictable cycle times and improved process reliability for batch and jobbing turning work. ISO compatibility reduces setup time and tooling complexity Built to the ISO SNMG 120416 geometry, the insert matches a wide range of indexable turning toolholders when form, clearance angle, tolerance class, fastening method, size and thickness are aligned. The 0° clearance angle and the central cylindrical hole support stable clamping, while the square 90° shape offers multiple usable edges. These features minimise downtime during insert changes and simplify inventory management for workshops handling a variety of turning tasks. Economical double‑sided geometry lowers cost per edge The double‑sided chipbreaker and square form provide reversible cutting edges, effectively doubling the number of usable edges per insert. Combined with a 1.6 mm corner radius and 4.76 mm plate thickness, the geometry gives sufficient rigidity for conventional turning while controlling cutting forces and chip formation. This balance of robustness and economy helps reduce tooling costs and improves component repeatability without sacrificing surface integrity. Practical guidance for turning applications and system setup Designed for external and internal turning, the insert is intended to be used as part of a system comprising the ISO indexable insert, an appropriate external holder or boring bar, a seating/lock set and replacement screws. Select a chipbreaker and grade aligned with the workpiece material and machining stability: the tough T9235 grade suits unstable set‑ups and interrupted cuts in steel. For quieter, high‑speed applications choose grades and geometries optimised for those conditions. Proper holder compatibility and clamping torque are essential for achieving the described performance and repeatability. For reliable, application‑matched turning with Tungaloy’s CVD‑coated T9235 inserts, contact Metav Werkzeuge for advice or stock confirmation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6786021 Manufacturer SKU: TUN6786021 SKU: 6786021-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.6 mm Plate thickness: 4.76 mm Plate size: 12 mm Insert angle: 90° Clearance angle: 0° Special features Form: square (SNMG) ISO designation: SNMG120416 Coating / grade: T9235 (CVD-coated) Substrate: cemented carbide Chipbreaker: double-sided Hole: central cylindrical hole Application: turning (external and internal) FAQ What materials is this insert suitable for? The SNMG120416 T9235 insert is intended primarily for machining steel; the T9235 CVD coating and carbide substrate are formulated to perform well under interrupted cuts and less stable conditions. How does the CVD coating benefit operation? A CVD‑coated cemented carbide insert offers improved abrasion resistance and edge stability, which for the SNMG120416 T9235 means longer life in demanding turning operations and fewer tool changes. Is the insert reversible and how many edges are usable? The square SNMG geometry with a double‑sided chipbreaker provides reversible edges; each insert offers multiple usable cutting edges when indexed correctly. What determines compatibility with toolholders? Compatibility depends on the ISO form, clearance angle, tolerance class, fastening method, size and thickness; the SNMG120416 designation simplifies matching to ISO‑compatible external holders and boring bars. Which system components are typically needed with this insert? A complete system comprises the ISO indexable insert, a suitable external holder or bore bar, a seating/lock set and replacement fixing screws to ensure secure clamping and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120420 T5115 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide T5115 grade, robust SNMG geometry and a double-sided chipbreaker for steady performance in cast-iron turning; order directly via Metav Werkzeuge or consult our technical team for application guidance. SNMG120420 T5115 Tungaloy turning insert — CVD-coated carbide, ISO SNMG square insert The SNMG120420 T5115 Tungaloy turning insert is an ISO-standard square indexable insert for external and internal turning, designed for productive machining of cast iron with a balanced mix of wear resistance and edge stability. CVD-coated carbide T5115 for cast-iron machining ISO SNMG120420 square geometry, 90° included angle Double-sided chipbreaker with cylindrical hole Reliable wear resistance for cast-iron machining The combination of a CVD coating and a carbide substrate in grade T5115 delivers a balanced performance profile: enhanced wear resistance together with maintained edge stability during interrupted and continuous cuts. The CVD process deposits hard layers that protect the substrate from abrasive wear, while the carbide core preserves toughness. This mix is particularly useful when machining grey or nodular cast iron, where fluctuating cutting conditions demand both abrasion resistance and a stable cutting edge. The insert is produced to ISO SNMG120420 dimensions to ensure compatibility with standard square indexable holders and mounting systems. Higher productivity through consistent chip control and robustness Chip control and repeatable tool life are central to productive turning. The insert’s double-sided chipbreaker promotes chip control across a range of depths of cut, reducing the risk of entanglement and stabilising cutting forces. With a 2 mm corner radius and a 90° included angle, the geometry supports higher radial engagement and improved rigidity, which can shorten cycle times on suitable machines. The neutral 0° clearance angle contributes to predictable cutting behaviour, while the insert’s dimensions — 12 mm inscribed size and 4.76 mm thickness — provide a robust platform for medium and heavy turning operations. Compatibility, handling and recommended use Compatibility with a given holder is defined by form, relief angle, tolerance class, fastening and the insert’s size and thickness; the system typically consists of the indexable insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. The SNMG design with a cylindrical hole permits secure fastening and straightforward indexing of the double-sided cutting edges, enabling economical use of both faces. Selection of the chipbreaker and grade should follow the workpiece material, machining strategy and machine/tooling stability — for less rigid setups choose lighter parameters and finer chipbreakers; for stable assemblies, the T5115 grade and its chipformer enable productive material removal while preserving edge life. For application advice, availability or to order SNMG120420 T5115 from Metav Werkzeuge, contact our technical consultants at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6852996 Manufacturer SKU: TUN6852996 SKU: 6852996-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 2 mm Included angle: 90° Clearance angle: 0° Special features Grade: T5115 (CVD-coated carbide) Insert designation: SNMG120420 Shape: square Hole: cylindrical hole Chipbreaker: double-sided Application: external and internal turning Material: carbide FAQ Is this insert suitable for cast-iron machining? The SNMG120420 T5115 Tungaloy turning insert (SKU 6852996-Tungaloy) is specifically offered as a universal grade for cast-iron work, combining T5115’s wear resistance with a chipformer suited to typical cast-iron chips. What advantages does the T5115 grade provide? T5115 is a CVD-coated carbide grade that provides a balanced compromise between abrasion resistance and edge stability; this supports longer tool life under the varied conditions encountered in cast-iron turning. How is holder compatibility determined? Compatibility is determined by the insert’s form, relief (clearance) angle, tolerance class, fastening method, size and thickness — the SNMG120420 follows ISO dimensions to match standard square turning holders. Can this insert be used for finishing passes? The insert’s 2 mm corner radius and robust geometry make it well suited to medium and rough turning; for fine finishing a smaller radius and a dedicated finishing grade or geometry may produce a better surface finish. How does the double-sided chipbreaker affect handling? The double-sided chipbreaker allows both faces to be indexed, improving economy; the cylindrical hole and standard ISO form enable secure clamping and straightforward replacement in compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120420 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T5125, a 2 mm corner radius and ISO compatibility for stable, productive turning operations. Order the SNMG120420 T5125 indexable insert directly via Metav Werkzeuge or contact our consultants for application advice. SNMG120420 T5125 — ISO indexable insert for turning (Tungaloy) The SNMG120420 T5125 is an ISO-standard square turning insert designed for interrupted cuts and less stable turning conditions, featuring a CVD-coated carbide grade optimised for cast iron machining. CVD-coated carbide T5125 for tough conditions ISO SNMG120420 form with 90° corner 2 mm corner radius for strength and versatility Double-sided chipbreaker with cylindrical hole Improve process reliability with a tough, coated grade The SNMG120420 insert combines a CVD-coated carbide substrate with a tougher grade designation T5125, which is especially suitable for the intermittent cutting and variable stability commonly encountered when machining cast iron. The CVD coating increases abrasive wear resistance while the underlying carbide provides the toughness required to resist chipping in interrupted cuts. For production environments where insert life and consistent cycle times matter, this combination translates into fewer index changes and a more predictable machining process. Geometry that balances strength and accessibility Featuring a 90° cutting angle and a 2 mm corner radius, this square insert gives a robust cutting edge that tolerates moderate cutting forces without compromising access to component features. The 4.76 mm thickness and square 12 mm form deliver a stable seating in compatible toolholders, while the cylindrical hole enables secure clamping and straightforward replacement. These geometric choices support both general facing and external turning tasks where edge strength is prioritised over very fine finishing. Chip control and system compatibility for efficient turning Equipped with a double-sided chipbreaker, the insert supports repeatable chip formation across both working faces, aiding evacuation and surface consistency in batch production. Compatibility with standard ISO turning holders is determined by the insert’s form, relief angle (0°), tolerance class, clamping arrangement, size and thickness, so the insert integrates easily into existing tool systems. Selecting the appropriate chipbreaker and grade combination helps to reduce cycle interruptions and contributes to a smoother production flow. Practical advantages for workshop and production settings Because the grade is tailored for less stable conditions, the insert is a practical choice for shops that encounter variability in setup stiffness or material quality. The adverse effects of interrupted cuts are mitigated by the tough T5125 grade and the robust edge geometry, which together reduce the likelihood of premature tool failure. This results in improved uptime, lower tooling consumption per part and enhanced process predictability—factors that matter for both small job shops and larger manufacturing lines. For technical recommendations or availability of Tungaloy SNMG120420 T5125 inserts, contact Metav Werkzeuge for tailored advice and stock information via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6852997 Manufacturer SKU: TUN6852997 Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade/coating: T5125 (CVD-coated) Application: Turning Manufacturer: Tungaloy Core dimensions ISO designation: SNMG120420 Size: 12 mm Thickness: 4.76 mm Corner angle: 90° Corner radius: 2 mm Relief angle: 0° Hole: with cylindrical hole Edge preparation: double-sided chipbreaker Design and features Square insert form Double-sided chipbreaker for repeatable chip control CVD coating for abrasive resistance Tough grade for interrupted cuts and less stable conditions Compatible with ISO-standard external holders, clamping sets and screws FAQ What materials is this insert suitable for? The SNMG120420 T5125 is formulated as a tougher grade for machining cast iron, particularly where interrupted cuts or variable clamping conditions occur. Can this insert be used in standard ISO holders? Compatibility depends on the holder’s form, relief angle, tolerance class, clamping method, size and thickness; the SNMG120420 is an ISO-standard form intended to match ISO toolholders meeting those parameters. What are the key geometric specifications to note? This square insert features a 90° corner angle, 2 mm corner radius and 4.76 mm thickness, with a cylindrical hole and a double-sided chipbreaker. Does the insert provide reliable chip control? Yes, the double-sided chipbreaker is designed to produce consistent chip formation across both working edges, aiding evacuation and surface quality in turning operations. Is this insert suitable for interrupted cuts? The T5125 CVD-coated carbide grade is specifically recommended for interrupted cutting and less stable conditions, offering improved resistance to chipping and wear. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120420 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, secure clamping and straightforward indexing to maintain a steady production flow with fewer tool changes. Order the inserts directly via Metav Werkzeuge or request application advice from their consultants for holder compatibility and optimal grade selection. SNMG120420 T9215 Tungaloy indexable insert — CVD-coated carbide for productive medium-steel turning The SNMG120420 T9215 Tungaloy insert is a square ISO-form turning insert engineered for external and internal turning of medium-strength steels, offering a balance of wear resistance and fracture toughness for continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 for medium steel Double-sided chipbreaker for flexible use Square SNMG form, 12 mm size, 4.76 mm thick Cylindrical hole for secure mounting Consistent productivity for medium-steel applications The combination of a CVD-coated surface and a robust carbide substrate makes this insert particularly suited to stable, productive turning operations. As a first-choice grade for mid-range steels, T9215 delivers enhanced wear resistance without compromising fracture toughness, which helps to reduce unscheduled tool changes and maintain cycle times. The geometry aims to support both external and internal facing and turning, while the double-sided nature extends usable life per index, contributing to lower tooling costs per part and a smoother manufacturing cadence. Secure mounting and simple indexability for reliable setups Built in the square SNMG format with a nominal 12 mm size and a plate thickness of 4.76 mm, the indexable plate features a cylindrical hole and a standard fastening arrangement that ensures repeatable clamping in compatible holders. The 2 mm corner radius and the double-sided chipbreaker allow two usable edges per side, and the specified relief angle of 0° governs clearance and contact with the workpiece. Compatibility to a particular holder depends on form, relief angle, tolerance class, fastening method, size and thickness, and the complete system typically comprises the insert, matching external holder or boring bar, shim/underplate and clamping screws. CVD protection for longer tool life and process stability The chemical vapour deposition treatment on the T9215 grade provides thermal and tribological advantages: improved resistance to abrasive wear and elevated temperatures that occur in high-throughput turning. This leads to steadier tool life and more consistent surface finishes when parameters and workpiece stability are appropriate. Selection of the correct chipbreaker, insert grade and holder rigidity remains critical — grades such as T9215 are designed for continuous to lightly interrupted cuts, so match cutting data and clamping stiffness to avoid premature edge failure. For advice on holder compatibility or grade selection, Metav Werkzeuge consultants can provide application-specific recommendations and machining guidelines. For high-productivity medium-steel turning with Tungaloy inserts, contact Metav Werkzeuge for tailored application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6773919 Manufacturer SKU: TUN6773919 SKU: 6773919-Tungaloy Designation: SNMG120420 T9215 Tungaloy insert Model series: ISO turning indexable inserts Core specifications Insert designation: SNMG120420 Size: 12 mm Thickness: 4.76 mm Corner radius: 2 mm Relief angle: 0° Hole style: cylindrical hole Shape: square Grade: T9215 Substrate: carbide Coating: CVD Features & applications Application: turning (external and internal) Chipbreaker: double-sided Suitable for: medium steel machining Cutting conditions: continuous to light interrupted cuts System components: insert, external holder or boring bar, shim/underplate, clamping screws Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert intended for? The SNMG120420 T9215 Tungaloy insert is primarily intended for medium steels; the T9215 grade and CVD-coated carbide substrate deliver wear resistance and toughness suited to typical steel turning tasks. What chipbreaker and edge configuration does it have? This indexable plate features a double-sided chipbreaker and a 2 mm corner radius, providing flexible edge options and two usable cutting edges per side for extended service life. What are the key dimensions and how is it mounted? The insert is a square SNMG form, 12 mm in size with a 4.76 mm thickness and a cylindrical hole for secure mounting; the manufacturer article number is 6773919 for reference. Can this insert handle interrupted cuts? The T9215 grade is suitable for continuous to light interrupted cuts; for heavier interruptions, evaluate holder rigidity and consider alternative grades or geometries designed for interrupted machining. How to ensure compatibility with holders and clamping systems? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; for application-specific matching, refer to Metav Werkzeuge or consult holder documentation when using the SNMG120420 T9215 Tungaloy insert (SKU 6773919-Tungaloy). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120420 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD‑coated carbide in grade T9225, reliable ISO geometry and secure clamping for consistent medium‑to‑heavy turning performance; order the insert directly via Metav Werkzeuge or contact their consultants for application advice. SNMG120420 T9225 — SNMG indexable turning insert for turning, Tungaloy A SNMG120420 T9225 ISO indexable insert engineered for turning operations, offering a square 90° geometry with a cylindrical hole and a double‑sided chipbreaker for predictable metal removal in steel machining. ISO‑standard square insert SNMG form CVD‑coated carbide grade T9225 2.0 mm corner radius, 4.76 mm thickness Double‑sided chipbreaker with cylindrical hole Consistent cutting performance for medium to heavy steel The combination of a CVD‑coated carbide substrate and the T9225 grade delivers a balance of toughness and wear resistance that is tailored to medium‑to‑heavy steel turning. The coating reduces flank wear and extends service life under variable engagement and slightly interrupted cuts, while the underlying carbide maintains edge stability. This results in lower tooling costs per part and fewer unscheduled insert changes, supporting a smoother production flow and predictable process economics. Geometry that simplifies clamping and repeatability Built to ISO dimensions, the square SNMG form with a 90° included angle and 2.0 mm corner radius gives a robust cutting edge suited to general turning. The 4.76 mm plate thickness and the cylindrical centre hole ensure straightforward seating and secure fastening in compatible holders. Compatibility with a particular toolholder depends on form, relief angle, tolerance class, fastening method, size and thickness; correct matching provides repeatable positioning and reduces vibration, improving surface finish and dimensional stability. Improved chip control and in‑process reliability The integrated double‑sided chipbreaker enhances chip formation and evacuation during continuous cutting, which helps to reduce chatter and maintain process security at higher material removal rates. As an indexable insert, the component supports economical reuse by indexing to fresh edges when appropriate. The system approach — insert, matching outer holder or boring bar, support pad/clamp and replacement screws — ensures a complete, serviceable solution for shopfloor deployment without the need for on‑site demonstrations. Designed application and handling guidance Specified for turning, the insert is particularly appropriate where robustness is required under fluctuating cutting conditions. The SNMG120420 ISO code denotes the standard geometry and size, which corresponds to the insert’s edge length and thickness; the presence of a cylindrical hole facilitates secure mounting. For best results, select a holder and clamping set that match the insert’s dimensions and tolerance class, and choose cutting data that reflect the component’s toughness and the workpiece material to balance tool life and productivity. Contact Metav Werkzeuge for tailored cutting data, availability and ordering of the Tungaloy SNMG120420 T9225 insert — advisers are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to support selection and process integration Technical data Article number: 6780747 Manufacturer SKU: TUN6780747 SKU: 6780747-Tungaloy Model series: ISO turning insert series Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 2.0 mm Clearance angle: 0° Included angle: 90° Special features Material: carbide, CVD‑coated Grade: T9225 (universal, robust) Plate shape: square Hole: cylindrical hole (with hole) Chipbreaker: double‑sided Application: turning System components: insert, matching outer holder/boring bar, support pad/clamp, replacement screws FAQ What materials is this insert suitable for? The SNMG120420 T9225 insert is a robust universal grade intended primarily for medium‑to‑heavy steel turning where variable engagement or slightly interrupted cuts demand increased toughness. How does the insert ensure secure mounting and repeatability? Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; the square form, cylindrical hole and 4.76 mm thickness provide reliable seating when paired with a matching holder. What advantages does the T9225 grade offer? The T9225 grade combines toughness and wear resistance for productive machining under fluctuating cutting conditions, extending edge life and improving process stability. What does the ISO designation 120420 mean for dimensions? The ISO code 120420 corresponds to the insert’s geometry and size; in this context it aligns with the 12 mm size and 4.76 mm thickness specified for the SNMG120420 insert. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120420 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9235 carbide for reliable performance in interrupted cuts and unstable conditions, combined with ISO conformity for straightforward holder compatibility; order or request advice directly via Metav Werkzeuge for application support. SNMG120420 T9235 Tungaloy indexable insert for turning — CVD-coated carbide, 12 mm square The SNMG120420 T9235 is an ISO-standard square indexable turning insert designed for external and internal turning, optimised for steel and interrupted cutting conditions. CVD-coated carbide grade T9235 Built for unstable and interrupted cuts ISO SNMG 120420, square 12 mm, 4.76 mm thick Central cylindrical hole for secure mounting Stable chip formation and predictable tool life in interrupted turning The CVD-coated T9235 grade is a tough carbide designed for machining steel at reduced cutting speeds and in less stable setups. The CVD coating enhances wear resistance on the cutting edge while maintaining toughness, which promotes stable chip formation and reduces the risk of premature edge failure during interrupted cuts. For production environments where cut conditions vary, this balance between hardness and toughness leads to fewer tool changes and more consistent cycle times. The insert’s double-sided chipbreaker geometry supports effective chip control in both external and internal turning operations, contributing to surface quality and process reliability. Clear compatibility and mounting for dependable setups Manufactured to ISO dimensions, the insert’s square 12 mm format, 4.76 mm thickness and 2 mm corner radius make it compatible with a wide range of external holders and boring bars when the holder matches form, clearance angle, tolerance and clamping method. The 0° clearance angle and central cylindrical hole ensure predictable seating and repeatable positioning, which is crucial for maintaining concentricity and tool runout in series production. Selecting the correct holder and clamping set according to these parameters simplifies set-up checks and reduces downtime during tool changes, enabling faster tool qualification and steadier part tolerances. Efficient system approach and recommended components for productive turning A productive system comprises the insert, a suitable external holder or boring bar, a backing plate or clamping set and replacement screws. The ISO designation and standardised dimensions enable quick matching to existing toolholders, while the carbide substrate and CVD finish extend edge life under interrupted loading. In practice, this leads to higher uptime and lower tooling consumption per part when compared to uncoated or less tough grades in similar conditions. For workshops seeking a robust solution for challenging steel turning tasks, the combination of a square SNMG insert, proven chip control and standardised mounting yields both process security and economic machining. For reliable turning under interrupted conditions, specify the Tungaloy SNMG120420 T9235 via Metav Werkzeuge — contact Metav Werkzeuge for tailored holder recommendations and application guidance by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6785948 SKU (manufacturer): TUN6785948 Material: Carbide Model series: ISO turning indexable inserts Manufacturer article number: 6785948 Dimensions & angles Insert designation: 120420 Size: 12 mm Thickness: 4.76 mm Corner radius: 2 mm Clearance angle: 0° Shape: square Hole: with hole (cylindrical) Features & application Coating: CVD-coated Grade: T9235 Chipbreaker: double-sided Typical application: external and internal turning Suitable for: steel System components: holder, backing plate/clamping set, replacement screws Intended use: unstable conditions and interrupted cuts FAQ Which materials are recommended for this insert? The SNMG120420 T9235 indexable insert by Tungaloy is formulated primarily for machining steel and performs well in interrupted and unstable cutting conditions. How is the insert secured in the toolholder? The insert uses a central cylindrical hole and standard ISO geometry; the SNMG120420 fits holders that match the form, tolerance class, clamping method, size and thickness. What benefits does the CVD coating provide? The CVD-coated carbide substrate on the T9235 grade improves wear resistance while preserving toughness, enhancing stable chip formation and edge life during interrupted cuts. Is the insert suitable for internal as well as external turning? Yes; the square ISO format and double-sided chipbreaker make the insert suitable for both external and internal turning when paired with the correct holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150608 AH8005 Wendeplatten - Tungaloy
A reliable choice for stable turning operations: the combination of PVD-coated carbide in AH8005 grade and the ISO SNMG150608 geometry ensures extended edge life and consistent performance; order directly via Metav Werkzeuge or consult the technical team for application guidance. SNMG150608 AH8005 SNMG turning insert, PVD-coated carbide, R0.8 — Tungaloy A SNMG150608 AH8005 indexable turning insert engineered for stable external and internal turning of heat-resistant alloys and harder materials. PVD-coated carbide for wear resistance Optimised for heat-resistant alloys R0.8 corner radius for edge strength Double-sided chipbreaker, through-hole design Durable coating and grade for longer tool life The combination of a PVD-coated surface and the AH8005 carbide formulation delivers measurable improvement in wear resistance during high-temperature cutting. PVD (physical vapour deposition) forms a thin, adherent layer that reduces abrasive and adhesive wear, which in turn prolongs the usable life of the cutting edge. For production environments where cycle times and tool-change intervals determine throughput, this specification translates into lower tooling costs per part and fewer interruptions for regrinding or replacement. The coating also aids in controlling built-up edge when machining challenging alloys. Geometry that supports precision and edge stability The ISO SNMG150608 geometry incorporates a square plate form with a corner radius of 0.8 mm (R0.8) and a 0° relief angle, providing a robust cutting edge with good resistance to chipping. A larger corner radius increases edge strength and can improve surface finish under steady cutting conditions, while the 0° relief delivers a neutral cutting action suitable for a wide range of feeds. The 90° included angle offers predictable behaviour in both facing and turning operations. These geometric choices make the insert well suited to medium and heavy-duty cuts where repeatability and resistance to mechanical shock are required. Chip control and material focus for consistent results Equipped with a double-sided chipbreaker and a cylindrical through-hole for secure fastening, the insert is tailored for effective chip formation and evacuation when machining heat-resistant alloys and other tough materials. The chipbreaker geometry helps to break and direct chips away from the cutting zone, reducing the risk of entanglement and improving surface integrity. For materials that alloy well at elevated temperatures, selecting this chipbreaker and the AH8005 grade ensures a balance between wear resistance and fracture toughness, delivering consistent part quality across batches. System compatibility and practical integration on the shop floor Designed as an ISO-standard indexable plate, the insert integrates into typical turning systems comprising a compatible external holder or boring bar, a locating pad or clamping kit, and replacement screws. Compatibility is governed by form, relief angle, tolerance class, fastening arrangement, size and thickness; matching these parameters with the chosen holder guarantees correct seat and repeatable clamping force. Using ISO-compliant components simplifies stockkeeping and makes it easier to specify replacements across different machines, supporting efficient changeovers and predictable machining performance. Contact Metav Werkzeuge for tailored advice on holders, clamping kits and optimal cutting parameters for this Tungaloy grade; technical specialists are available by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6741679 Manufacturer SKU: TUN6741679 SKU: 6741679-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: SNMG150608 Grade/coating: AH8005 (PVD-coated carbide) Data Corner radius: 0.8 mm Plate thickness: 6.35 mm Plate size: 15 mm Relief angle: 0° Included hole: Yes Hole style: Cylindrical Geometry angle: 90° Special features Double-sided chipbreaker Square plate form PVD-coated carbide substrate Suited for heat-resistant alloys and hard materials ISO-compliant indexable insert Application: Turning (external and internal) FAQ What materials is this insert suited for? The SNMG150608 AH8005 Tungaloy insert is formulated for heat-resistant alloys and other harder workpiece materials where wear resistance and edge stability are required. How does the AH8005 grade affect performance? The AH8005 PVD-coated carbide grade offers enhanced wear resistance at elevated cutting temperatures, providing longer tool life compared with uncoated grades in similar applications. Is the SNMG150608 compatible with standard holders? Yes—being an ISO-compliant indexable plate, the SNMG150608 is compatible with matching ISO holders when form, relief, tolerance class, fastening and thickness are correctly matched. How many cutting edges are available per plate? The double-sided design provides multiple usable edges; correct indexing sequence and secure fastening via the cylindrical through-hole ensure safe and repeatable edge changes on the SNMG150608 insert. What benefit does the R0.8 corner radius provide? The R0.8 radius increases edge strength, helps to improve finish in stable machining conditions and reduces the likelihood of edge chipping during medium to heavy cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150608 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated AH8015 grade and ISO SNMG geometry for stable cutting in heat‑resistant alloys, plus a 0° relief and 90° lead angle for predictable tool behaviour; order the SNMG150608 insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG150608 AH8015 – ISO turning insert, PVD‑coated carbide (Tungaloy) The SNMG150608 AH8015 is an ISO‑standard turning insert designed for external and internal turning of heat‑resistant alloys, providing a balanced combination of wear resistance and edge stability. ISO SNMG150608 geometry for holder compatibility PVD‑coated AH8015 grade for heat‑resistant alloys 0° relief angle for neutral cutting behaviour Double‑sided chipbreaker, cylindrical hole for secure clamping Consistent performance through material and coating The insert uses a PVD‑coated carbide grade (AH8015) selected for the general machining of heat‑resistant alloys. This coating improves wear resistance while maintaining edge stability, which reduces flank wear and helps keep cutting forces consistent over multiple edges. In production terms, that means longer effective tool life per index and fewer unscheduled tool changes, supporting a steady machining rhythm and predictable cycle times. ISO geometry and system compatibility for seamless tool changes Manufactured to ISO dimensions, the plate follows the SNMG form so compatibility with standard external holders and boring bars is straightforward. Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness, so matching the insert to the correct clamping set and screw is essential for repeatable results. The square form and cylindrical hole enable easy seating and secure fixation in conventional top‑clamp systems. Practical advantages that boost productivity The plate’s double‑sided chipbreaker provides two usable cutting edges per side, improving economical use of the insert and reducing tooling costs per component. The combination of a controlled chipformer and a neutral relief angle supports predictable chip flow when turning challenging alloys, which in turn contributes to stable surface finish and reduced risk of tool failure. The 6.35 mm thickness and 15 mm inscribed circle give the insert the rigidity required for many medium‑to‑heavy turning operations. Application guidance and integration into production Designed for both external and internal turning, the insert performs best when the chipbreaker and grade are matched to the workpiece material and machining stability. Selection of a suitable holder and clamping kit is recommended; a matched set with correct tolerance class and fastening method ensures indexing without loss of accuracy. For customers seeking further specification data or help with holder selection, Metav Werkzeuge can advise on the correct clamping set and replacement screws to complete the system. For ordering, compatibility checks or technical discussion about the Tungaloy SNMG150608 AH8015 turning insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a specialist. Technical Data Article number: 6741680 Manufacturer SKU: TUN6741680 Type designation: SNMG150608 Grade/coating: AH8015 (PVD) Material: carbide Plate form: square Hole: with cylindrical hole Facts Corner radius: 0.8 mm Plate size (IC): 15 mm Plate thickness: 6.35 mm Relief/clearance angle: 0° Lead/approach angle: 90° SKU: 6741680-Tungaloy Special features ISO‑standard SNMG insert series Double‑sided chipbreaker PVD‑coated AH8015 for heat‑resistant alloys Compatible with standard external holders and boring bars Typical system: insert, compatible holder or boring bar, underlay/clamping set and replacement screws FAQ What materials is this insert suitable for? The Tungaloy SNMG150608 AH8015 insert is intended primarily for machining heat‑resistant alloys; the AH8015 grade offers a balance of wear resistance and edge stability for such materials. How does the 0° relief affect cutting behaviour? A 0° relief (neutral) on this indexable insert promotes predictable cutting forces and helps maintain a controlled chip flow when combined with the plate’s chipbreaker geometry. Is the insert compatible with standard ISO holders? Yes, the SNMG150608 follows ISO dimensions; compatibility with a given holder depends on matching form, relief angle, tolerance class, fastening method, size and thickness. How many cutting edges are available per insert? The plate is double‑sided with a chipbreaker on each side, providing multiple usable cutting edges and economical tool usage. What advantages does the PVD coating provide? The PVD treatment on the AH8015 grade increases surface hardness and wear resistance, improving tool life and surface quality in demanding turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 150608 T9215 Wendeplatten - Tungaloy
Take advantage of the T9215 grade’s combination of high wear resistance and reliable fracture strength for consistent productivity in medium steel turning; order the original insert directly via Metav Werkzeuge or consult their specialists for cutting data and compatibility advice. SNMG 150608 T9215 indexable turning insert — Tungaloy The SNMG150608 T9215 is an ISO-standard, square indexable insert designed for external and internal turning in medium steel applications, offering a robust CVD-coated carbide grade for productive, continuous to slightly interrupted cuts. ISO-standard SNMG150608 geometry CVD-coated carbide T9215 for medium steel Double-sided chipbreaker, cylindrical hole 0.8 mm corner radius, 6.35 mm thick square insert Consistent performance for medium-steel turning The CVD-coated carbide T9215 grade combines wear resistance with breakage resistance, delivering steady cutting behaviour under continuous and lightly interrupted conditions. This grade is engineered to maintain edge stability at elevated material removal rates, which supports predictable tool life and more uniform component quality. The coating enhances resistance to abrasive wear, so the cutting edge retains form longer, reducing unscheduled tool changes and contributing to lower process costs. Reliable compatibility within ISO tooling systems As an ISO-standard square insert, the component fits holders according to form, free-angle, tolerance class, fastening and thickness. The insert features a 0° relief angle and a cylindrical hole for secure clamping, while the square insert format and 0.8 mm corner radius balance strength and versatility for outer and inner turning. Specifying matching holders, underlay/clamping sets and replacement screws ensures system reliability and repeatable setup, minimising downtime and simplifying inventory management. Practical handling that improves productivity The double-sided chipbreaker layout extends service life by allowing the insert to be indexed, while the solid carbide substrate provides mechanical stability in demanding cuts. With a 6.35 mm thickness, the plate resists bending under load and promotes stable chip formation, which in turn supports a better surface finish and consistent dimensional accuracy. Selecting the chipbreaker style and the grade according to workpiece material and machining stability yields measurable gains in throughput and predictability on production lines. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on Tungaloy indexable inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6772295 Manufacturer SKU: TUN6772295 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: SNMG150608 Facts Corner radius: 0.8 mm Plate thickness: 6.35 mm Plate size: 15 mm Included angle: 90° Relief angle: 0° Manufacturer article number: 6772295 Special features Grade/coating: T9215 (CVD-coated carbide) Material: carbide Plate form: square Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Application: turning Compatible system: ISO turning insert holders, clamping sets and replacement screws FAQ What materials is this insert best suited for? The SNMG150608 T9215 insert is optimised for medium steel machining; the T9215 grade offers a balance of wear resistance and toughness for productive turning. How does the double-sided chipbreaker affect service life? A double-sided chipbreaker allows the insert to be indexed to a fresh cutting edge, extending the usable life of each insert and improving overall cost efficiency for the tooling system. Which holders are compatible with this insert? Compatibility depends on holder form, free angle, tolerance class, fastening and thickness; the SNMG150608 conforms to ISO specifications and fits compatible square-indexable turning holders designed for SNMG plates. What does the cylindrical hole provide? The cylindrical hole ensures positive, repeatable clamping in the seat and supports accurate positioning and secure fixation during both external and internal turning operations. Can this insert handle interrupted cuts? The T9215 grade is suitable for continuous and light interrupted cuts; for heavy interruptions, select a geometry and grade adapted to the specific stability and material conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150612 AH120 Wendeplatten - Tungaloy
PVD-coated carbide AH120 provides wear- and fracture-resistant cutting performance together with ISO SNMG 150612 compatibility for reliable mounting and straightforward tool change; order the SNMG150612 AH120 insert directly via Metav Werkzeuge or ask the consultants for individual application advice. SNMG150612 AH120 — Tungaloy indexable insert for turning, PVD‑coated carbide, 1.2 mm radius SNMG150612 AH120 is an ISO‑format indexable insert engineered for external and internal turning, combining a sharp cutting edge with high process security for consistent production results. PVD-coated carbide AH120 Wear- and fracture-resistant grade ISO‑standard SNMG 150612 format Double-sided chipbreaker, 90° square Reliable performance for precision turning The PVD‑coated carbide grade AH120 is specified for turning operations where a sharp cutting edge and stable machining are required. The combination of a thin, hard coating and a robust substrate reduces abrasive wear and helps maintain edge geometry under load; this translates into longer tool life and fewer index changes, which supports uninterrupted production. For customers seeking consistent part quality, the coated carbide delivers improved surface finish and predictable dimensional stability while remaining compatible with standard turning regimes. Designed for secure clamping and straightforward compatibility The insert follows the ISO SNMG 150612 format and therefore mates with common SNMG holders; mechanical compatibility is governed by form, clearance angle, tolerance class, fixation, size and thickness. Key geometric data — 15 mm inscribed circle, 6.35 mm thickness, 1.2 mm corner radius, 0° clearance angle and 90° included angle — define how the insert seats, the effective cutting radius and the contact stresses at the clamp. The insert is supplied "with hole" and a cylindrical hole accommodates standard screws and clamping systems; a full system typically comprises the ISO insert, a matched external holder or boring bar, a shim/clamp set and replacement screws to ensure repeatable seating and rigidity. Application scope and machining guidance Intended for both external and internal turning, the double‑sided chipbreaker geometry gives two usable cutting edges per side and a stable chip control suited to a range of workpiece materials. Select the chipbreaker type and the AH120 grade in line with the workpiece material, machining method and machine stability to balance productivity and edge life. Because the grade is described as wear‑ and fracture‑resistant, it is particularly suitable where intermittent cuts or variable engagement occur and a reliable cutting edge is essential to avoid edge chipping. For less experienced operators, the standard ISO format simplifies spare part management and reduces set‑up time in mixed fleets. Contact Metav Werkzeuge today for tailored advice on Tungaloy turning inserts — request application support or order SNMG150612 AH120 via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6811975 SKU: 6811975-Tungaloy Manufacturer SKU: TUN6811975 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core Data Corner radius: 1.2 mm Clearance angle: 0° Insert size: 15 mm Thickness: 6.35 mm Included angle: 90° Materials & Features Material: carbide Grade/coating: AH120, PVD-coated Chipbreaker: double-sided Plate shape: square Hole: with cylindrical hole Typical use: external and internal turning System components: insert, matched holder or boring bar, shim/clamp and replacement screws Performance notes: wear- and fracture-resistant; sharp cutting edge; process security FAQ What materials is this insert suitable for? The SNMG150612 AH120 turning insert (Tungaloy, SKU 6811975-Tungaloy) is specified for general turning applications; the AH120 grade is wear‑ and fracture‑resistant and should be selected according to workpiece material and machining conditions. How many usable edges does the insert provide? The SNMG150612 is a double‑sided indexable insert, offering multiple cutting edges per index to increase usable life before replacement. Which holders fit this insert? Holders compatible with the ISO SNMG 150612 format and matching clearance, size and tolerance class are suitable; mounting requires a matched clamp or shim and the standard screw for the cylindrical hole. What is the corner radius and how does it affect the cut? The insert has a 1.2 mm corner radius, which influences the cutting profile and edge strength — a larger radius typically improves edge robustness and surface finish at the cost of higher cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150612 AH120 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH120 grade and the ISO SNMG 150612 geometry for reliable, sharp-edge turning and controlled chip formation; the 1.2 mm corner radius and double-sided chipbreaker support repeatable performance and economical index changes. Order directly via Metav Werkzeuge or consult our advisors for suitability and hold-down recommendations. SNMG150612 AH120 indexable insert for Turning by Tungaloy the SNMG150612 AH120 is an ISO-compliant indexable insert developed for external and internal turning where a sharp cutting edge and process security are required PVD-coated carbide AH120 1.2 mm corner radius Double-sided chipbreaker ISO SNMG 150612 geometry Predictable cutting performance from grade and coating The combination of the AH120 cutting grade and a PVD-coated carbide substrate delivers a balance of wear resistance and edge strength that supports stable turning cycles. The applied coating reduces adhesion and thermal wear at the cutting edge, which in turn prolongs tool life when machining a wide range of materials. Specified as an ISO insert with proven geometry, the component gives machine shops a measurable improvement in process reliability and consistent cycle times, reducing quality variation in serial production. Compatibility and secure clamping for straightforward integration Designed to the SNMG 150612 ISO standard, this square insert with a 15 mm edge length and 6.35 mm thickness fits holders that match form, relief angle and tolerance class; the cylindrical hole and 90° included angle ensure accurate seating and repeatable clamping. The 0° relief specification and clear dimensional data make it easier to confirm holder compatibility and avoid downtime during tool changes. Clear, standardised geometry simplifies tool management across multiple machines and supports predictable set-up times on the shop floor. Consistent surface finish and reduced downtime through chip control The double-sided chipbreaker arrangement offers two usable cutting edges per side, enabling economical indexing while maintaining effective chip control for both external and internal turning. The 1.2 mm corner radius contributes to stronger cutting edges and improved surface integrity, reducing the risk of edge chipping when interrupted cuts or unstable conditions occur. Together, these features help maintain dimensional accuracy and surface quality between edge changes, lowering scrap rates and easing process qualification in batch production. Practical benefits for workshop productivity Because the insert is double-sided and PVD-treated, tool change intervals become more predictable and inventory requirements can be optimised. The standardised SNMG format favours modular toolholding systems, so spare inserts and replacement screws can be stocked centrally and deployed rapidly. For operations that prioritise throughput and repeatability, the combination of AH120 grade and ISO geometry supports efficient tool rotation strategies and helps to secure consistent part output over extended production runs. For process-critical turning tasks, choose the Tungaloy AH120 SNMG 150612 insert for proven edge stability and chip control — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for ordering and application advice. Technical data Article number: 6811976 SKU: 6811976-Tungaloy Manufacturer SKU: TUN6811976 Model series: ISO turning indexable inserts Facts Insert designation: SNMG150612 Corner radius: 1.2 mm Thickness: 6.35 mm Insert size: 15 mm Relief angle: 0° Included angle: 90° Special features Coating: AH120 (PVD) Material: carbide Chipbreaker: double-sided Hole style: cylindrical hole Shape: square Typical application: turning (external and internal) FAQ What materials is this insert suitable for? The SNMG150612 AH120 insert is a PVD-coated carbide grade intended for a broad material range in turning; the AH120 formulation emphasises wear resistance and edge strength for stable cutting performance. How does the 1.2 mm corner radius affect machining results? A 1.2 mm corner radius increases edge robustness and improves surface finish under variable cutting conditions; when using the SNMG150612 geometry, the radius helps reduce edge chipping and supports consistent part tolerances. Is the insert reversible and how many cutting edges are available? Yes, the insert is double-sided with a chipbreaker on each side, providing multiple usable edges that reduce downtime through economical indexing. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; the SNMG150612 conforms to ISO standards so it fits holders designed for SNMG inserts with a cylindrical hole seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150612 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade, a 1.2 mm corner radius and an ISO-compliant geometry for consistent turning of stainless steel; order directly via Metav Werkzeuge or request technical advice if further data is required. SNMG150612 AH6225 indexable insert for turning — PVD-coated carbide, 1.2 mm radius (Tungaloy) SNMG150612 AH6225 is an ISO-format indexable insert for general turning applications, optimised for stainless steel and medium-duty machining. PVD-coated carbide for durable performance Universal grade optimised for stainless steel Double-sided chipbreaker for flexible use 1.2 mm corner radius, square 15 mm format Engineered for reliable cutting performance and predictable tool life The PVD-coated carbide grade AH6225 combines a sharp yet stable cutting edge with wear-resistant surface treatment to balance edge life and form stability when machining stainless steel. The coating improves thermal stability and reduces built-up edge, which translates into more consistent component tolerances and fewer interrupted cycles. With a geometry intended for medium cutting conditions, the insert supports repeatable results across batch production and mixed runs, reducing the need for frequent index changes and supporting a smoother process flow. ISO compatibility that simplifies integration and reduces setup time As part of the ISO turning insert family, the plate is specified to fit holders that match on form, relief angle, tolerance class, mounting and thickness. The square 15 mm format and 6.35 mm plate thickness enable secure clamping in standard external holders and boring bars; the design also anticipates use with shims, clamping sets and replacement screws as part of a complete tooling system. The 0° relief angle and standard hole (cylindrical) ensure repeatable seating and simple inventory management when pairing inserts with certified toolholders. Geometry tuned for stability, chip control and surface quality A 1.2 mm corner radius and a 90° approach geometry support improved part surfaces and dimensional control on shoulder and external turning operations. The double-sided chipbreaker provides two indexed cutting edges, extending usable life per insert and offering flexibility with different feed and depth settings. The central cylindrical hole contributes to secure attachment and repeatable positioning, enhancing process stability during interrupted cuts and promoting consistent chip formation. Practical advantages for shop-floor productivity and tooling economy Grade AH6225 is designed as a universal option for stainless steel that lowers the number of specialised grades required in stock. The combination of PVD treatment and a balanced edge makes the insert a pragmatic choice for mixed-series production where both surface finish and tool life matter. Less frequent replacements and straightforward indexing reduce downtime, while the standardised ISO form supports quick replacement and consistent setup across machines. For operations pursuing steady throughput with minimal complexity, the insert offers an effective compromise between performance and inventory efficiency. For ordering, sample requests or detailed machining recommendations for the Tungaloy AH6225 grade, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge’s specialists can advise on holder compatibility and cutting data. Technical data Manufacturer item no.: 6903196 SKU: 6903196-Tungaloy Manufacturer SKU: TUN6903196 Model series: ISO-Drehwendeschneidplatten Label: SNMG150612 AH6225 Tungaloy-Wendeplatte Core data Plate designation: SNMG150612 Corner radius: 1.2 mm Plate size: 15 mm Plate thickness: 6.35 mm Relief angle: 0° Approach angle: 90° Features Coating / grade: AH6225 (PVD) Material: carbide Chipbreaker: double-sided Hole: with cylindrical hole Plate form: square Typical application: turning System components: ISO insert, compatible external holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The SNMG150612 AH6225 insert is intended primarily for stainless steel and performs well in medium-duty turning where a balance of surface finish and edge life is required. How many cutting edges are available per index? The square design with a double-sided chipbreaker provides multiple usable edges; the insert can be indexed to present a fresh edge when required, extending overall tool life. Which holder types are compatible with this indexable insert? Compatibility depends on holder form, relief angle, tolerance class, mounting and thickness; the ISO format is compatible with standard external holders and boring bars designed for 15 mm square plates and 6.35 mm thickness. Can this insert be used for interrupted cuts or grooving operations? The central cylindrical hole and the robust edge geometry enhance stability in interrupted cuts; however, suitability for specific grooving tasks should be verified against the intended holder and cutting parameters. Is the AH6225 grade suitable for mixed-production environments? Yes, the AH6225 grade is a universal option optimised for stainless steel, reducing the number of specialised grades required and simplifying tooling inventories. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com