SNMG 150612 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO-standard format, a sharp yet durable PVD-coated carbide AH6225 grade, and a secure clamping design for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG150612 AH6225 Tungaloy insert — Turning, PVD-coated carbide The SNMG150612 AH6225 Tungaloy insert is an ISO-standard indexable cutting insert designed for external and internal turning applications, offering a sharp, stable cutting edge for variable stainless steel machining conditions ISO SNMG150612 format, square insert PVD-coated carbide AH6225 grade Optimised for stainless steels Double-sided chipbreaker with cylindrical hole Consistent cutting performance for stainless steels The SNMG150612 AH6225 insert combines a PVD-coated surface with a carbide substrate to deliver a keen edge that maintains stability under changing cutting conditions. The main customer benefit is a predictable tool life and surface quality when machining stainless steels, achieved by the coating’s wear resistance and the substrate’s toughness. The AH6225 grade is formulated for medium cutting operations where a balance between edge sharpness and robustness reduces unplanned tool changes and improves process reliability. Secure clamping and ISO compatibility for flexible tooling systems Produced to the ISO SNMG format, the insert ensures compatibility with a wide range of external holders and boring bars when the form, relief angle (0°), tolerance class, clamping method, size and thickness are matched. The cylindrical hole and the square geometry support positive, repeatable seating in the pocket and enable the use of a secure clamp or screw. As a double-sided component, the indexable design permits economical use of both edges, supporting longer production runs with less inventory turnover and lower per-edge cost. Practical integration that raises productivity on the shop floor System integration is straightforward: the insert works within an assembly comprising a matching external holder or boring bar, a shim/clamping set and replacement screws. The 1.2 mm corner radius and 6.35 mm thickness offer a robust cutting tip for medium-duty turning, while the double-sided chipbreaker promotes consistent chip control and improved finish. Choosing the appropriate chipbreaker and grade for the workpiece stability results in reduced vibration and more consistent cycle times, directly contributing to higher throughput and process stability. For tailored advice on integrating Tungaloy AH6225 inserts into existing tooling systems or to request availability from Metav Werkzeuge, please contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — specialists are available to discuss holder compatibility and application optimisation. Technical Data Article number: 6903198 Manufacturer SKU: TUN6903198 Supplier SKU: 6903198-Tungaloy Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Insert designation: SNMG150612 Corner radius: 1.2 mm Insert size: 15 mm Thickness: 6.35 mm Relief angle: 0° Included hole: cylindrical hole Included angle: 90° Special features Coating: PVD coating Material: carbide Grade: AH6225 Geometry: square, double-sided chipbreaker Typical application: external and internal turning Compatibility: determined by form, relief angle, tolerance, clamping, size, thickness System components: matching holder or boring bar, shim/clamping set, spare screws Optimised for: stainless steels FAQ What materials is this insert best suited for? The SNMG150612 AH6225 Tungaloy insert is optimised for machining stainless steels, offering a balance of edge sharpness and wear resistance for medium turning operations. How does the PVD coating improve performance? The PVD-coated surface on this indexable insert reduces flank wear and helps maintain a sharper edge, which supports consistent surface finish and longer edge life under varying conditions. Is the insert reversible and how does that affect economy? Yes — the insert is double-sided, allowing both edges to be used; the SNMG format increases the cutting volume available per insert and lowers the effective cost per cutting edge. What determines compatibility with a turning holder? Compatibility depends on the insert form, relief angle (0°), tolerance class, clamping method, size (15 mm) and thickness (6.35 mm); matching these parameters ensures correct seating and secure clamping. Does the insert include a central hole and what is its purpose? The insert has a cylindrical hole, which facilitates secure clamping with a screw and ensures reliable repeatability in the pocket during index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150612 AH6235 Wendeplatten - Tungaloy
SNMG150612 AH6235 Wendeplatte für Drehen – Tungaloy Die SNMG150612 AH6235 Wendeplatte ist eine ISO-genormte Schneidplatte zum Außen- und Innendrehen, speziell entwickelt für zähere Anwendungen an rostfreien Stählen und unterbrochenen Schnitten Vielseitig einsetzbar beim Drehen von rostfreien Stählen PVD-beschichtetes Hartmetall für verbesserte Standzeit Doppelseitiger Spanbrecher für wirtschaftliche Nutzung Quadratische Form mit 6,35 mm Dicke für stabile Fixierung Produktives Drehen bei erhöhtem Ausbruchrisiko Die SNMG150612 AH6235 bietet durch ihre PVD-Beschichtung und den zähen Schneidstoff einen deutlichen Vorteil bei der Bearbeitung von rostfreien Stählen. Durch die Kombination aus Hartmetall und Beschichtung wird die Standzeit verbessert und die Gefahr von Ausbrüchen bei unterbrochenem Schnitt reduziert. Anwender profitieren von konstanten Ergebnissen bei anspruchsvollen Serienprozessen sowie von geringeren Ausfallzeiten durch häufigen Plattenwechsel Material und Beschichtung für langlebige Performance Die Platte besteht aus robustem Hartmetall mit PVD-Beschichtung, was eine hohe Verschleißfestigkeit und thermische Belastbarkeit ermöglicht. Diese Materialkombination sorgt für konstante Schneidkantenstabilität und gute Oberflächengüten am Werkstück. Für Betriebe bedeutet das weniger Nachbearbeitung und höhere Produktivität bei der Zerspanung von rostfreien Stählen Konstruktion, Form und Halterkompatibilität Die quadratische Plattenform mit zylindrischem Loch und einer Plattendicke von 6,35 mm gewährleistet eine sichere Klemmbefestigung im Halter. Der Eckenradius 1,2 mm bietet stabile Schnittbedingungen, während der Freiwinkel 0° die Schneidgeometrie für robuste Schnitte optimiert. Achten Sie bei der Auswahl des Halters auf Form, Freiwinkel und Toleranzklasse, um die volle Leistungsfähigkeit der Platte zu nutzen Einsatzbereiche, Zielgruppe und Anwendungshinweis Entwickelt für das Außen- und Innendrehen, eignet sich die Platte besonders für Anwender in der Serienfertigung und Lohnfertigung, die häufig rostfreie Stähle und unterbrochene Schnitte bearbeiten. Für optimale Ergebnisse sollte die Sorte AH6235 mit passenden Spanbrechern und stabiler Aufspannung kombiniert werden. Ein gezielter Vorschub und angepasste Schnittgeschwindigkeit tragen zusätzlich zur Lebensdauer bei Empfehlung: Für produktive Bearbeitungen an rostfreien Stählen die Tungaloy Wendeplatte über Metav Werkzeuge anfragen – eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6903388 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: SNMG150612 AH6235 Hersteller SKU: TUN6903388 Daten Plattendicke: 6,35 mm Plattengröße: 15 mm Eckenradius: 1,2 mm Winkel: 90° Besonderheiten Material: Hartmetall Beschichtung: PVD-Beschichtet Sorte: AH6235 (zähere Sorte für rostfreie Stähle) Spanbrecher: doppelseitig Loch: mit zylindrischem Loch Plattenform: quadratisch Einsatz: Drehen, Außen- und Innendrehen, geeignet für unterbrochene Schnitte FAQ Für welche Werkstoffe eignet sich die Platte am besten? Die SNMG150612 AH6235 von Tungaloy ist speziell für rostfreie Stähle ausgelegt; die Sorte AH6235 wurde für zähe Werkstoffe und unterbrochene Schnitte optimiert Welche Vorteile bringt die PVD-Beschichtung? Die PVD-Beschichtung erhöht die Verschleißfestigkeit und thermische Beständigkeit, sodass die Tungaloy Wendeplatte längere Standzeiten und konstantere Bearbeitungsergebnisse liefert Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die SNMG150612 AH6235 wurde für Außen- und Innendrehen konzipiert und bietet durch die quadratische Form sowie das zylindrische Loch eine sichere Spannlösung Welche Rolle spielt der Eckenradius 1,2 mm? Der Eckenradius 1,2 mm sorgt für eine robuste Schneidkante, reduziert Kerbwirkungen und verbessert die Prozesssicherheit bei wechselnden Schnittbedingungen Wie wähle ich den passenden Halter aus? Achten Sie auf Form, Freiwinkel, Toleranzklasse sowie Befestigungsmodus und Plattendicke, um eine optimale Kompatibilität und sichere Fixierung der SNMG150612 AH6235 zu gewährleisten Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG 150612 AH8005 Wendeplatten - Tungaloy
Combining a PVD-coated AH8005 grade and a 1.2 mm corner radius ensures durable cutting performance and consistent surface finish during stable turning operations. Order the SNMG150612 AH8005 insert directly via Metav Werkzeuge or consult the Metav team for application-specific support. SNMG 150612 AH8005 indexable turning insert for turning — Tungaloy The SNMG150612 AH8005 indexable turning insert is an ISO-standard square insert designed for external and internal turning of heat-resistant alloys and hard materials. PVD-coated carbide grade AH8005 Suited for heat-resistant alloys and hard materials Square 90° geometry with 1.2 mm corner radius Double-sided chipbreaker, with cylindrical hole Durable grade for demanding turning tasks The AH8005 is a PVD-coated carbide formulation developed for wear resistance when machining heat-resistant alloys and other tough materials. The coating enhances thermal stability and reduces adhesions at the cutting edge, which leads to longer edge life under continuous, stable cutting conditions. With a sturdy corner radius of 1.2 mm, the insert offers improved edge strength and predictable tool life, translating into fewer tool changes and steadier production throughput. ISO compatibility and secure clamping for predictable machining This insert conforms to the ISO SNMG150612 geometry, ensuring compatibility with matching external holders and boring bars. The 0° relief angle and standardised dimensions allow for straightforward selection of a suitable holder, while the cylindrical locating hole provides reliable seating and clamping stability. The standardised system approach—insert, holder, clamp set and replacement screws—supports repeatable setup and minimises downtime through fast, secure indexable changes. Efficient chip control and economical edge utilisation Equipped with a double-sided chipbreaker, the insert delivers controlled chip formation in a range of cutting conditions and allows two usable cutting edges per side, offering cost-efficient edge utilisation. The chipbreaker geometry supports consistent surface finish and reduces the risk of built-up edge in interrupted or continuous turning. As a result, the insert helps maintain productivity and part quality while lowering tooling costs over a production run. For high-performance turning with Tungaloy technology, order the SNMG150612 AH8005 through Metav Werkzeuge or contact Metav Werkzeuge for tailored technical advice via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6741681 SKU: 6741681-Tungaloy Manufacturer SKU: TUN6741681 Model series: ISO-Drehwendeschneidplatten Type designation: SNMG150612 AH8005 Numbers / Core technical data Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 15 mm Geometry angle: 90° Relief angle: 0° Number of usable sides: double-sided Designs / Special features Material: cemented carbide Coating: PVD-coated Chipbreaker: double-sided Hole: with cylindrical hole Plate form: square Application: turning of heat-resistant alloys and hard materials System components: compatible with external holder, boring bar, clamp set and replacement screws FAQ What materials is this insert intended for? The SNMG150612 AH8005 insert is intended for machining heat-resistant alloys and other hard workpiece materials where a wear-resistant PVD-coated carbide grade is required. How does the corner radius affect performance? The 1.2 mm corner radius increases edge strength and improves stability, resulting in longer tool life and a more consistent surface finish when machining under stable cutting conditions. Is the SNMG150612 compatible with standard ISO holders? Yes, the SNMG150612 follows ISO dimensions and mounts in matching external holders or boring bars; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. How many effective cutting edges are available on this insert? With a double-sided chipbreaker, the insert provides multiple usable edges, allowing efficient edge indexing to reduce tooling costs and downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150612 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated AH8015 carbide, a 1.2 mm corner radius and a double‑sided chipbreaker for dependable machining of heat‑resistant alloys; order directly via Metav Werkzeuge or consult our advisors for holder compatibility and process optimisation. SNMG150612 AH8015 SNMG Turning Insert – PVD‑coated Carbide by Tungaloy The SNMG150612 AH8015 is an ISO‑standard turning insert designed for external and internal turning of heat‑resistant alloys in general machining applications. PVD-coated carbide grade AH8015 Suitable for heat‑resistant alloys 1.2 mm corner radius for robust edge Double‑sided chipbreaker with cylindrical hole Balanced grade and coating for productive machining The combination of a PVD‑coated surface and the AH8015 carbide substrate provides a measured balance between wear resistance and edge stability, making the insert well suited to continuous production runs on heat‑resistant alloys. The coating reduces adhesive wear at elevated temperatures while the substrate maintains toughness during interrupted cuts. As a result, cycle times are reduced and tool‑change frequency is lower, which supports steady output and predictable process costs. ISO conformity and secure clamping for predictable results As an ISO‑standard insert, the geometry and datum points ensure straightforward integration into existing toolholder systems; compatibility is governed by form, relief angle, tolerance class, fastening, size and thickness. The insert is supplied with a cylindrical hole, enabling secure seating and repeatable clamping in compatible holders, which reduces setup variability and contributes to consistent component tolerances in series production. Geometry that combines strength and surface quality The double‑sided chipbreaker and a 1.2 mm corner radius deliver a robust cutting edge that lowers the risk of chipping while supporting good surface finish on workpieces. The moderate corner radius increases edge strength for heavy or unstable cuts, and the chipbreaker geometry assists in reliable chip control when machining alloys that tend to produce long or stringy swarf, thereby improving machine uptime and operator safety. System perspective for longer tool life and lower tooling costs Consider the insert as part of a system: the ISO insert, matched holder, appropriate shim or clamping set and correct replacement screws. Selecting the right chipbreaker and the AH8015 grade according to workpiece material and machining stability optimises tool life and process stability. With fewer unexpected tool failures and predictable wear behaviour, overall machining costs fall and process planning becomes more reliable. Contact Metav Werkzeuge to discuss how the Tungaloy SNMG150612 AH8015 insert can be integrated into current turning processes; Metav Werkzeuge’s technicians provide application advice and compatibility checks to help select the right holder and clamping solution Technical Data Article number: 6741682 Manufacturer SKU: TUN6741682 SKU: 6741682-Tungaloy Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts ISO designation: 150612 Corner radius: 1.2 mm Thickness: 6.35 mm Size: 15 mm Relief angle: 0° Insert shape: square (quadrangular) Hole: with cylindrical hole Angle: 90° Special features Material: carbide Coating: PVD Grade: AH8015 (for heat‑resistant alloys) Chipbreaker: double‑sided Application: external and internal turning System components: insert, holder, shim/clamping set, replacement screws Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The SNMG150612 AH8015 insert is designed primarily for machining heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for general turning. How does the chipbreaker affect machining? The double‑sided chipbreaker on the SNMG150612 helps control chip formation and evacuation, improving surface quality and reducing the risk of chip entanglement during turning. What does the 1.2 mm corner radius mean in practice? A 1.2 mm corner radius provides a stronger cutting edge that tolerates heavier cuts and occasional instability, at the cost of a slightly larger minimum nose radius on the finished profile. Is the insert compatible with existing ISO holders? Compatibility depends on holder geometry, tolerance class and fastening method; the ISO designation and cylindrical hole allow straightforward matching to holders designed for SNMG‑style inserts. Which coating and grade are used and what is their benefit? The insert uses a PVD coating on an AH8015 carbide substrate, combining temperature resistance with edge integrity for improved tool life when machining demanding alloys. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 150612 T515 Wendeplatten - Tungaloy
Combine economical cast iron machining with proven CVD-coated carbide performance and secure clamping for consistent shop-floor results. Order the SNMG150612 T515 insert directly via Metav Werkzeuge or consult their specialists for technical advice. SNMG150612 T515 indexable insert for turning — CVD-coated carbide, 0° clearance (Tungaloy) The SNMG150612 T515 is an ISO-format indexable turning insert intended for economical machining of cast iron, offering a square 15 mm format with a double-sided chipbreaker and a central cylindrical hole for secure mounting. CVD-coated carbides T515 grade Optimised for cast iron machining Double-sided chipbreaker design Square 15 mm ISO SNMG format Cylindrical central hole for secure clamping Economic machining of cast iron with high tool life The CVD-coated T515 carbide grade combines a wear-resistant surface with a substrate designed for stable cutting in cast iron. This results in extended tool life and lower cost per part when compared with uncoated alternatives. The coating reduces edge wear and supports consistent cutting speeds, so production runs become more predictable. For operations seeking a balance between economy and repeatability, this insert delivers a measurable improvement in machining efficiency without requiring complex parameter changes. Controlled chips and dependable clamping for uninterrupted cycles A double-sided chipbreaker engineered for cast iron improves chip fragmentation and evacuation, reducing the risk of tangling and surface marks. The insert’s cylindrical central hole and ISO square form ensure a reproducible seating and positive clamping force in compatible holders, which is crucial for maintaining repeatable part quality. Compatibility with a given toolholder is governed by form, clearance angle, tolerance class, attachment method, size and thickness; correct matching preserves the insert’s geometry and supports stable cutting conditions. ISO system compatibility and practical shop-floor integration Manufactured to ISO dimensions, the SNMG150612 format fits standard external turning holders that accept SNMG inserts. The combination of a 15 mm square body and 6.35 mm thickness provides mechanical rigidity suitable for many external and internal turning tasks on cast iron. The 0° clearance specification indicates the relief geometry that should be matched by the holder and cutting strategy to avoid rubbing. Using established ISO formats simplifies stocking, reduces setup time and helps standardise tool management across multiple machines. For reliable, economical cast iron turning with the Tungaloy SNMG150612 T515, contact Metav Werkzeuge for tailored technical advice or to arrange supply — Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6744297 SKU: 6744297-Tungaloy Manufacturer article no.: 6744297 Manufacturer SKU: TUN6744297 Model series: ISO-Drehwendeschneidplatten Material: carbide (cemented carbide) Grade/coating: T515 (CVD-coated) Facts Corner radius: 1.2 mm Plate size: 15 mm Plate thickness: 6.35 mm Clearance angle: 0° Angle: 90° Manufacturer SKU: TUN6744297 Special features ISO SNMG150612 geometry Square insert with cylindrical central hole Double-sided chipbreaker Optimised for cast iron machining System: indexable insert for turning Compatibility determined by form, clearance, tolerance class, attachment, size and thickness FAQ Which materials is this insert suitable for? The SNMG150612 T515 insert is formulated primarily for machining cast iron, where the T515 CVD-coated carbide grade provides wear resistance and consistent cutting performance. How does the chipbreaker affect machining performance? The double-sided chipbreaker on the insert improves chip control and fragmentation during turning, which reduces clogging and helps protect part surfaces from chip-induced damage. What determines compatibility with a toolholder? Compatibility is defined by the insert’s form, clearance angle, tolerance class, attachment method, size and thickness; matching these parameters with the toolholder ensures secure clamping and correct cutting geometry. Is the SNMG150612 suitable for internal and external turning? Yes, the ISO SNMG150612 indexable insert is designed for both external and internal turning applications when fitted in the appropriate holder and used with the correct cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150612 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide wear resistance, a 1.2 mm corner radius for robust edge strength and the ISO‑compliant 90° geometry to maintain stable, productive turning operations; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. SNMG150612 T9205 indexable turning insert by Tungaloy — ISO‑compliant, CVD‑coated carbide for productive steel turning SNMG150612 T9205 is an ISO‑standard indexable insert for external and internal turning, designed for stable, high‑speed steel machining CVD‑coated carbide grade T9205 Designed for productive steel turning Double‑sided chipbreaker for reliable chip control Square, 90° geometry for secure clamping Long‑term productivity through wear‑resistant coating and material The CVD‑coated carbide composition of the insert provides a high degree of wear resistance, improving tool life under higher cutting speeds typical of productive turning. The T9205 grade has been selected for stable cutting conditions on steel, offering a balance of toughness and abrasion resistance that reduces tool changes and supports consistent cycle times. For production environments where uptime and repeatability matter, the combination of coating technology and substrate hardness results in measurable gains in process economy. Stable cutting performance from geometry and dimensions The square, 90° geometry and a 1.2 mm corner radius contribute to cutting stability and edge strength, particularly in interrupted cuts or heavier depth‑of‑cut situations. The insert is 6.35 mm thick with a nominal size of 15 mm, features a 0° relief angle and a cylindrical locating hole, all conforming to ISO norms; these attributes ensure reproducible seating in approved holders and predictable contact mechanics at the tool tip. Stable seating and defined geometry improve surface finish and extend the useful tool life by reducing edge chipping. Application guidance and system considerations for reliable results The indexable plate is double‑sided with a dedicated chipbreaker suited to a range of turning operations; selecting the matching chipbreaker and the appropriate holder based on form, tolerance class and fastening ensures optimal performance. Typical system components are an ISO‑compatible external holder or boring bar, a clamping pad or kit, and replacement screws. The product supports both external and internal turning tasks where high process reliability and consistent results are required, particularly on steels processed under stable machine and fixture conditions. For genuine Tungaloy inserts and tailored application advice, contact Metav Werkzeuge — Metav Werkzeuge is available to advise on holder compatibility and batch supply Technical data Article number: 6785744 SKU: 6785744‑Tungaloy Manufacturer SKU: TUN6785744 Core measurements Corner radius: 1.2 mm Thickness: 6.35 mm Size (inscribed circle): 15 mm Geometry angle: 90° Relief angle: 0° Hole: with cylindrical hole Grade: T9205 Material: carbide Special features CVD‑coated carbide composition Double‑sided chipbreaker Square plate form (quadrilateral) ISO‑standard turning insert series Suitable for external and internal turning of steel Compatibility depends on holder form, relief angle, tolerance and fastening FAQ What materials is this insert suitable for? The SNMG150612 T9205 indexable insert is specified for productive turning of steel under stable cutting conditions; the T9205 grade and CVD coating are optimised for wear resistance in steel machining. Is the insert reversible and how is chip control managed? The insert is double‑sided, allowing indexability, and features a dedicated chipbreaker to control chip form and evacuation during continuous turning operations. Which dimensions determine holder compatibility? Holder compatibility is determined by the insert’s form, relief angle (0°), tolerance class, fastening style and 6.35 mm thickness; matching these parameters ensures secure clamping and correct seat geometry. Does the geometry support heavier cuts? The 90° geometry combined with a 1.2 mm corner radius increases edge strength and stability, making the insert suitable for applications involving moderate to heavier depths of cut where robust performance is required. Can this insert be used for internal turning? Yes, the SNMG150612 T9205 plate is suitable for both external and internal turning when paired with the correct external holder or boring bar and appropriate clamping components. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 150612 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, fracture safety and easy integration into ISO holders to maintain a smooth turning process; the insert suits continuous and lightly interrupted cuts while the double-sided geometry reduces downtime. Order directly via Metav Werkzeuge or request application advice from our consultants. SNMG150612 T9215 SNMG turning insert by Tungaloy — ISO turning application, square 90° The SNMG150612 T9215 is an ISO-standard turning insert designed for external and internal turning, offering a square 90° form with a double-sided chipbreaker and a cylindrical hole for secure mounting. CVD-coated carbide grade T9215 Suitable for medium steel machining Square 90° form with cylindrical hole Double-sided chipbreaker for stable chips Productive performance for medium steel turning The CVD-coated carbide composition of the insert delivers elevated wear resistance and improved tool life in demanding production runs. The selected grade is optimised for medium steel machining, combining hardness and toughness so that the cutting edge resists abrasive wear while remaining fracture resistant under varying cutting conditions. CVD coating is a chemical vapour deposition layer that forms a dense, adherent film on the substrate; this reduces adhesive wear and helps maintain consistent cutting geometry over longer cycles. The result is fewer index changes and higher overall output per tool. Secure geometry and straightforward holder compatibility The square SNMG form with a 90° angle ensures predictable cutting forces and straightforward clamping in ISO-compatible toolholders. The insert features a corner radius 1.2 mm and a thickness of 6.35 mm, dimensions that support a robust edge and reliable seat contact. The cylindrical hole accepts standard fastening screws and underlay components, simplifying replacement in the tool turret. Clear dimensional standards mean the component integrates smoothly into existing tool systems with minimal setup time and consistent repeatability. Stable chip control for continuous to light interrupted cuts Equipped with a double-sided chipbreaker, the design regulates chip flow to prevent tangling and reduce heat concentration at the cutting zone. This leads to improved surface quality and less risk of workpiece damage in both external and internal turning operations. The geometry supports continuous and light interrupted cutting, so production lines dealing with mixed part runs can maintain stable cycle times while reducing unplanned interventions for chip clearing. Practical advantages for production environments As an indexable insert within an ISO system, the component simplifies stockkeeping and reduces per-part cutting costs by allowing multiple edge positions per index. The combination of grade, coating and geometry is tuned for productive turning: consistent chip formation, predictable wear patterns and straightforward edge changes. When paired with an appropriate holder and clamping kit, the system helps to achieve repeatable component tolerances and a reliable surface finish, making it a pragmatic choice for batch and continuous manufacturing. Contact Metav Werkzeuge for availability and tailored application advice on the SNMG150612 T9215 turning insert; our team can confirm suitability for specific steels and cutting conditions and assist with fast delivery and technical recommendations. Technical data Article number: 6774105 Facts Corner radius: 1.2 mm Thickness: 6.35 mm Size: 15 mm Angle: 90° Free cutting angle: 0° Manufacturer SKU: TUN6774105 SKU: 6774105-Tungaloy Special features Material: carbide Coating: CVD-coated Grade: T9215 Model series: ISO turning inserts Form: square Hole: with hole (cylindrical) Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert intended for? The SNMG150612 T9215 Tungaloy turning insert is optimised for medium steel machining and performs reliably across a broad range of common steel grades. Is the insert indexable and reversible? Yes, the SNMG150612 is double-sided and indexable; each edge can be rotated to present a fresh cutting face, extending overall tool life. Which holder types are compatible with this ISO insert? ISO-standard turning holders that accept SNMG form inserts with a cylindrical hole and 90° seating are compatible; the geometrical standards of the SNMG150612 ensure straightforward clamping. How does the CVD coating benefit production runs? The CVD-coated carbide substrate on the T9215 grade offers enhanced wear resistance and thermal stability, helping to maintain edge geometry during longer production cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150612 T9215 Wendeplatten - Tungaloy
High wear resistance from the CVD-coated carbide T9215 combined with a 1.2 mm corner radius ensures stable, productive turning for medium steels; order the SNMG 150612 T9215 indexable insert via Metav Werkzeuge or consult our specialists for application recommendations. SNMG 150612 T9215 – ISO turning insert, CVD-coated carbide by Tungaloy A SNMG 150612 T9215 indexable turning insert engineered for medium steel turning, offering a double-sided geometry and a cylindrical hole for secure clamping CVD-coated carbide grade T9215 Double-sided, reversible geometry 1.2 mm corner radius for robust edge Square 15 mm size, 6.35 mm thickness Consistent cutting performance for medium steel production The combination of CVD-coated carbide and the T9215 grade delivers an optimised balance of wear resistance and toughness ideal for mid‑range steel turning. The CVD layer is a thin, hard coating deposited by chemical vapour deposition that improves abrasive wear resistance while maintaining a supported cutting edge, which translates into longer tool life and fewer indexings in serial production. This translates to measurable gains in uptime and machine throughput when compared with uncoated or less robust grades, especially under continuous or lightly interrupted cutting conditions. Secure fit and straightforward system integration As an ISO turning insert, compatibility with the toolholder is determined by the insert form, relief angle, tolerance class, attachment method, size and thickness. The square, 15 mm format with 6.35 mm thickness, 0° relief angle and cylindrical hole provides reliable seating and repeatable clamping forces in standard external holders and boring bars. The double-sided design halves the inventory cost per cutting edge and the 1.2 mm corner radius offers a compromise between edge strength and surface finish, reducing the risk of premature chipping in routine turning operations. Practical guidance for efficient cutting conditions This indexable insert is specified for turning operations on medium steels and performs best in continuous to light interruption scenarios; the T9215 composition is tuned for stable chip control and predictable wear behaviour. Select the appropriate chipbreaker and cutting parameters to match workpiece material and rigidity: a moderate feed combined with the grade’s wear resistance supports higher material removal rates while maintaining surface quality. For interrupted cuts beyond light instabilities, choose heavier geometries or grades designed for severe interruptions to protect the edge integrity. For application advice, stock availability or to request cutting-parameter recommendations for the Tungaloy SNMG 150612 T9215 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774114-Tungaloy Manufacturer item number: 6774114 SKU manufacturer: TUN6774114 Model series: ISO turning inserts Brand: Tungaloy Dimensions & key figures Insert size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Included hole: cylindrical Insert form: square Cutting angle: 90° Features & materials Material: carbide Coating: CVD-coated Grade: T9215 Geometry: double-sided, reversible Typical application: turning (external and internal) System compatibility: ISO FAQ Is this insert suitable for machining steel? Yes. The SNMG 150612 T9215 insert from Tungaloy is the first choice for medium steel turning, combining T9215’s wear resistance with edge stability for continuous and light interrupted cuts. Can this insert be used for interrupted cuts? The Tungaloy SNMG 150612 T9215 is suitable for continuous to light interrupted cuts; for heavy, repeated interruptions a different geometry or a more toughened grade should be selected. What are the key dimensions and geometry of this insert? The SNMG 150612 T9215 insert is square, 15 mm in size, 6.35 mm thick, with a 1.2 mm corner radius, 0° relief angle and a cylindrical centre hole for secure clamping. Is the insert reversible or single‑use per side? This insert is double-sided and reversible, providing two usable cutting edges per side and contributing to cost-effective indexable insert management. Which holders will accept this ISO insert? Holders that conform to ISO standards for SNMG‑type inserts—matching form, relief, tolerance class, attachment and the 15 × 6.35 mm dimensions—are compatible; ensure the holder accepts a square SNMG insert with a cylindrical hole. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150612 T9215 Wendeplatten - Tungaloy
Combining the T9215 CVD coating with a robust carbide substrate and a double-sided chipbreaker, this SNMG150612 insert delivers durable performance and reliable chip control for medium-steel turning. The ISO geometry and 90° square shape ensure straightforward integration with standard holders. Order the SNMG150612 T9215 directly via Metav Werkzeuge or consult our advisors for tailored selection support. SNMG 150612 T9215 SNMG – Tungaloy indexable insert for turning, CVD‑coated carbide SNMG150612 T9215 is an ISO‑standard indexable insert designed for efficient external and internal turning in medium‑steel applications ISO geometry SNMG150612 for secure seating T9215 CVD‑coated carbide for wear resistance Double‑sided chipbreaker for stable chip control 90° square insert with cylindrical hole for reliable clamping Greater productivity in medium‑steel turning The combination of a CVD‑coated carbide substrate and the T9215 grade gives a balance of wear resistance and fracture toughness that suits continuous and lightly interrupted cuts. This results in fewer tool changes and more productive machining cycles. The coating reduces flank and crater wear, which helps to stabilise cutting forces and maintain dimensional accuracy over longer runs. For operations where consistent throughput and predictable tool life matter, this insert supports higher utilisation with minimal compromise on surface quality. Stable chip control and reduced downtime A double‑sided chipbreaker improves chip formation and evacuation, leading to safer, more consistent chip flow and reduced risk of edge damage. The controlled chips help maintain coolant access and lower the likelihood of rework caused by built‑up edge. As a result, process reliability increases and cycle times become more predictable. The insert’s geometry promotes steady cutting conditions, which in turn reduces machine idle time and contributes to overall shop efficiency. Straightforward integration with ISO tooling systems Manufactured to ISO standards, the insert’s square 90° form, 15 mm seat size and 6.35 mm thickness make it compatible with common external holders when matching form, clearance angle, tolerance class, fixing and size. The cylindrical centre hole facilitates positive seating and repeatable clamping. Compatibility depends on holder specification, so matching the insert’s 0° relief, corner radius 1.2 mm and thickness to the toolholder ensures optimal cutting stability and repeatable part quality. This design simplifies tool inventory and reduces setup complexity on the shop floor. Contact Metav Werkzeuge to discuss the Tungaloy T9215 grade and ensure the correct SNMG150612 insert selection for medium‑steel turning Technical data Article number: 6773948 SKU: 6773948-Tungaloy Manufacturer SKU: TUN6773948 Designation: SNMG150612 Series: ISO‑Drehwendeschneidplatten Material: Hartmetall Grade: T9215 Core specifications Corner radius: 1.2 mm Insert size: 15 mm Thickness: 6.35 mm Relief angle: 0° Insert shape: square (90°) Hole: with hole (cylindrical) Chipbreaker: double‑sided Materials & features CVD‑coated carbide Suited for medium steel turning ISO‑standard indexable insert Compatible with ISO holders when matched by form and tolerance Designed for continuous to lightly interrupted cuts FAQ What material applications is this insert intended for? This SNMG150612 T9215 indexable insert (Tungaloy, SKU: 6773948‑Tungaloy) is optimised for medium steel turning and performs well in continuous to slightly interrupted cuts. How does the T9215 grade improve tool life compared with uncoated grades? The T9215 CVD coating on the carbide substrate reduces flank and crater wear, which extends tool life and maintains dimensional accuracy during longer production runs. Can this insert be used in internal turning operations? Yes, the ISO geometry and secure clamping via the cylindrical hole make the insert suitable for both external and internal turning when the toolholder is compatible. What does the double‑sided chipbreaker deliver in production? The double‑sided chipbreaker promotes consistent chip formation and evacuation, improving process reliability and reducing the risk of tool edge damage and machine downtime. Which toolholders are compatible with this insert? Compatibility requires matching the insert’s shape, relief angle, tolerance class, fixing method, size and thickness to the holder; selecting holders designed for SNMG‑style inserts ensures correct seating and stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 150612 T9215 Wendeplatten - Tungaloy
SNMG150612 T9215 Tungaloy-Wendeplatte — ISO-Drehwendeschneidplatte für Drehen SNMG150612 T9215 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen mittlerer Stahlwerkstoffe Hoher Verschleißwiderstand durch CVD-Beschichtung Doppelseitiger Spanbrecher für stabile Spanbildung Quadratische Platte, Eckenradius 1,2 mm für Vielseitigkeit Passend für standardisierte Außenhalter und Bohrstangen Plattendicke 6,35 mm für robuste Klemmung Maximierte Produktivität bei mittlerer Stahlbearbeitung Die Kombination aus CVD-beschichtetem Hartmetall und der Sorte T9215 sorgt für ausgeprägten Verschleißwiderstand und gleichzeitig gute Bruchsicherheit. Dadurch ermöglicht die Platte hohe Schnittparameter bei kontinuierlichem bis leicht unterbrochenem Schnitt, was die Produktivität in Serien- und Einzelfertigung erhöht. Für Anwender bedeutet das geringere Werkzeugwechselintervalle und stabilere Prozessläufe. Präzise Spanformung und Prozessstabilität Die quadratische Form mit einem Eckenradius von 1,2 mm und der doppelseitige Spanbrecher gewährleisten kontrollierte Spanabfuhr und vermeiden Aufbauschneiden. Aufgrund des 0° Freiwinkels und der ISO-genormten Abmessungen lässt sich die Platte zuverlässig in vorhandene Haltersysteme integrieren; die Kompatibilität wird über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt. Das Ergebnis sind gleichbleibende Oberflächenqualität und reproduzierbare Maßhaltigkeit. Einfache Integration und zielgerichtete Anwendung Die SNMG150612 ist ausgelegt für Anwender, die effiziente, robuste Lösungen für die Bearbeitung mittlerer Stähle suchen. Die Hartmetall-Ausführung bietet lange Standzeiten und die Sorte T9215 ist speziell für produktive Zerspanung optimiert. Anwender profitieren von geringem Aufwand bei Sortenauswahl und hoher Prozesssicherheit, sodass Fertigungsabläufe planbar und wirtschaftlich bleiben. Erwerben Sie die SNMG150612 T9215 Tungaloy-Wendeplatte direkt über Metav Werkzeuge für zuverlässige Produktivität — Fragen und Bestellungen per E‑Mail an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produkteigenschaften Artikelnummer: 6772296 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: SNMG150612 SNMG SKU Hersteller: TUN6772296 Daten Plattendicke: 6,35 mm Plattengröße: 15 mm Eckenradius: 1,2 mm Freiwinkel: 0° Winkel: 90° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte/Beschichtung: T9215 Plattenform: Quadratisch Spanbrecher: Doppelseitig Loch: Mit Loch Lochstil: Zylindrisches Loch Anwendung: Drehen ISO-Code: 150612 FAQ Kann die Platte für Innen- und Außenbearbeitung verwendet werden? Die SNMG150612 T9215 Tungaloy-Wendeplatte ist für Außen- und Innendrehen ausgelegt und bietet durch die quadratische Form und den doppelseitigen Spanbrecher vielseitige Einsatzmöglichkeiten. Für welche Werkstoffe ist die Sorte T9215 geeignet? Die Sorte T9215 ist die erste Wahl für mittlere Stahlqualitäten; die CVD-Beschichtung kombiniert hohen Verschleißwiderstand mit Bruchsicherheit für produktive Zerspanung. Welche Vorteile bietet die Eckenradius-Angabe von 1,2 mm? Der Eckenradius 1,2 mm der SNMG150612 reduziert Kerbwirkung bei hohen Zustellungen und trägt zu stabiler Schnittführung sowie guter Oberflächengüte bei. Ist die Platte mit Standard-Außenhaltern kompatibel? Ja, die SNMG150612 T9215 Tungaloy-Wendeplatte entspricht ISO-Normen; Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Wie wirkt sich die CVD-Beschichtung auf Standzeit und Schnittparameter aus? Die CVD-Beschichtung erhöht den Verschleißwiderstand und erlaubt höhere Schnittgeschwindigkeiten bei konstantem Prozess, was zu längeren Standzeiten und höherer Produktivität führt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG 150612 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, robust edge security and simple holder compatibility for steady productivity in turning operations; order original inserts via Metav Werkzeuge or consult the technical team for application-specific recommendations. SNMG150612 T9215 Tungaloy indexable insert for turning (ISO, 90°) SNMG150612 T9215 – an ISO‑standard indexable turning insert for external and internal turning, designed for medium steel machining with a 90° seating angle. ISO SNMG 150612 geometry CVD‑coated carbide grade T9215 Double‑sided chipbreaker for turning Cylindrical hole; 6.35 mm thickness Increased productivity for medium‑steel turning The CVD‑coated carbide composition and the T9215 grade deliver a balance of wear resistance and fracture toughness, enabling sustained cutting performance in continuous to mildly interrupted cuts. This combination reduces downtime from insert changes and supports higher material removal rates, which improves throughput on series production. The geometry is optimised for stable chip formation and consistent surface quality when machining common structural and engineering steels. Secure clamping and broad holder compatibility Designed to the ISO indexable insert series, compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the 90° seating angle and cylindrical centre hole ensure positive location and repeatable clamping. Where toolholders match the SNMG form, the insert’s double‑sided design provides two cutting edges per index, reducing tooling cost per edge and simplifying inventory management for workshops and toolrooms. Technical advantages explained simply The 1.2 mm corner radius and 6.35 mm plate thickness contribute to edge strength and heat resistance, while the double‑sided chipbreaker aids controllable chip flow during turning. For less experienced users: CVD (chemical vapour deposition) coating applies a thin ceramic layer to the carbide substrate, improving hardness at temperature and delaying abrasive wear. This makes the insert a good first choice for medium steels where a reliable balance between cycle time and insert life is required. For compatibility checks, cutting‑data recommendations or to order original Tungaloy SNMG150612 T9215 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert advice and prompt processing. Technical data Article number: 6772300 Manufacturer SKU: TUN6772300 SKU: 6772300-Tungaloy Model series: ISO‑Drehwendeschneidplatten Application: Turning Measurements Designation: SNMG150612 Plate size: 15 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Seating angle: 90° Relief angle: 0° Hole style: with cylindrical hole Special features Material: carbide Coating/grade: T9215 (CVD‑coated) Chipbreaker: double‑sided Plate shape: square Insert type: ISO indexable turning insert Typical use: external and internal turning; medium steel; continuous to light interrupted cuts FAQ Is this insert suitable for general steel turning? Yes. The SNMG150612 T9215 insert from Tungaloy is optimised for medium steel machining and performs well in continuous to slightly interrupted turning operations. How does the T9215 grade affect tool life? The T9215 CVD coating increases wear resistance and provides stable cutting performance, which extends insert life under typical machining conditions for medium steels. Can the insert be used on both external and internal turning operations? Yes. The ISO SNMG form and the square plate geometry make the insert suitable for both external and internal turning when the appropriate holder is used. How many cutting edges are available per insert? The insert is double‑sided; each side provides usable cutting edges, effectively increasing the number of edges available before disposal. Which holder features are essential for compatibility? Compatibility depends on the holder’s form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters to the SNMG shape and 90° seating is essential. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 150612 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9225 for stable chip control and the 90° square geometry with a 1.2 mm corner radius for robust medium-to-heavy steel turning; order original Tungaloy inserts via Metav Werkzeuge or consult our engineers for compatibility and application advice. SNMG150612 T9225 ISO turning insert — square 90° form by Tungaloy The SNMG150612 T9225 is an ISO-compliant square turning insert intended for external and internal turning, offering durable CVD-coated carbide performance and a double-sided chipbreaker for varied cutting conditions. CVD-coated carbide grade T9225 Robust for medium to heavy steel machining Double-sided chipbreaker for process stability Square 90° insert with cylindrical hole Consistent cutting performance under demanding conditions The CVD-coated carbide grade T9225 combines wear resistance and toughness to deliver predictable tool life in medium to heavy steel turning. The coating reduces flank and crater wear while the substrate offers the required fracture resistance for slightly interrupted cuts. As a result, the insert supports longer productive machining times and fewer tool changes, which translates into improved machine utilisation and reduced non-productive time. The 90° geometry contributes to a solid contact area and stable cutting forces in straight turning operations, helping to maintain dimensional accuracy and surface integrity. System compatibility that simplifies set-up and repeatability Designed to the ISO indexable insert standard, the geometry, relief, tolerance class, fastening and thickness together determine fitment to the appropriate holder. The cylindrical hole and standard form ensure secure clamping in suitable external holders or boring bars, while the double-sided configuration doubles the available cutting edges per insert. Specifying an ISO holder with matching pocket form and clamp avoids misalignment and enables repeatable set-ups, reducing set-up time and scrap. The insert integrates into typical systems comprising an ISO insert, matched outer holder or boring bar, backing pad/clamping set and replacement screws. Clear machining scope and practical dimension data This insert is especially suited to turning steels where a balance of toughness and wear resistance is required. Key dimensions that guide application choices include 15 mm inscribed circle, 6.35 mm thickness, 1.2 mm corner radius and a 0° relief angle, with a 90° lead/approach angle for square form operations. The double-sided chipbreaker offers flexibility: selecting the appropriate breaker and grade for the material and stability of the set-up prevents built-up edge and ensures controlled chips. For finishing passes, the moderate corner radius helps maintain surface quality while providing edge strength for semi‑roughing. Process security, economy and handling benefits Using this CVD-coated indexable insert supports higher process security in everyday production: the engineered coating and substrate combination reduce unexpected wear and maintain a stable cutting edge, which in turn lowers the frequency of tool changes. The two usable sides increase cost-efficiency per insert, and ISO compatibility speeds replacement and inventory management. Given its robust construction, this insert is a sound choice for job shops and production lines seeking dependable, repeatable performance with straightforward handling and predictable maintenance intervals. Contact Metav Werkzeuge for application advice, compatibility checks and to order original Tungaloy SNMG150612 T9225 inserts by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6781340 Manufacturer SKU: TUN6781340 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Lead angle: 90° Special features CVD-coated carbide grade T9225 Double-sided chipbreaker Square insert with cylindrical hole Suitable for medium to heavy steel turning ISO-compliant insert geometry FAQ What materials is this insert suitable for? The SNMG150612 T9225 insert is specified for medium to heavy steel turning; the CVD-coated carbide composition offers balanced toughness and wear resistance for these applications. How many usable cutting edges does the insert provide? Thanks to the double-sided design, the insert provides two indexed cutting edges per side, increasing the number of usable edges before replacement. Which holders are compatible with this ISO insert? Compatibility depends on insert form, relief angle, tolerance and thickness; use an ISO-compatible external holder or boring bar that matches the SNMG150612 geometry and the 6.35 mm thickness for secure clamping. Is the SNMG150612 suitable for interrupted cuts? The carbide substrate combined with the T9225 coating provides increased toughness, making the insert appropriate for slightly interrupted cutting conditions in steel machining. What are the key dimensions to check before ordering spare inserts? Confirm the inscribed circle (15 mm), plate thickness (6.35 mm), corner radius (1.2 mm) and the presence of the cylindrical hole to ensure fitment with the intended holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150612 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of proven material technology, ISO compatibility and robust geometry for reliable medium to heavy-duty turning. Order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. SNMG150612 T9225 turning insert for Drehen – Tungaloy The SNMG150612 T9225 is an ISO‑standard indexable turning insert designed for medium to heavy‑duty turning applications, offering a balance of toughness and wear resistance for variable engagement conditions. CVD-coated carbide for high wear resistance 1.2 mm corner radius for stable cutting ISO SNMG150612 — wide holder compatibility Double-sided geometry with cylindrical hole Consistent cutting performance for variable conditions The CVD‑coated carbide grade T9225 delivers a combination of toughness and wear resistance that suits medium to heavy Stahl machining where interrupted cuts or changing engagement depths occur. The robust substrate and coating system maintain edge integrity under fluctuating loads, which results in more consistent cycle times and reduced rework. By selecting a universal grade that emphasises toughness, the tool life becomes less sensitive to moderate variations in feed and depth, so production remains stable even when conditions are not ideal. Practical compatibility that speeds set‑up Conformity with the ISO SNMG150612 format ensures straightforward compatibility with a wide range of external holders and boring bars. The square form and the central, cylindrical hole support secure clamping and simple orientation on the toolholder, reducing set‑up time and ensuring repeatable positioning. Because the insert is double-sided, each indexable component provides two usable edges, improving material utilisation and lowering tooling change frequency — a clear advantage in busy turning shops where uptime matters. Geometry and dimensions that improve process stability A 1.2 mm corner radius provides a balance between chip control and edge strength: smaller radii favour finer finishes, while larger radii enhance strength for heavier cuts. The 0° clearance angle and the 6.35 mm thickness contribute to the insert's rigidity, minimising vibration and deflection during external and internal turning operations. Together with the CVD-coated carbide construction, these design choices lead to predictable tool behaviour and a reduction in forced stops for insert replacements. Contact Metav Werkzeuge today to discuss the SNMG150612 T9225 from Tungaloy and obtain tailored advice for turning applications — info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: 6780977 Manufacturer SKU: TUN6780977 SKU: 6780977-Tungaloy Facts Corner radius: 1.2 mm Thickness: 6.35 mm Inscribed circle / size: 15 mm Clearance angle: 0° Included hole: with cylindrical hole Special features ISO designation: SNMG150612 Grade: T9225 Carbide type: CVD‑coated carbide Geometry: square, double‑sided Typical use: Drehen (turning) FAQ What materials is this insert intended for? The SNMG150612 T9225 insert is specified for medium to heavy Stahl machining where a tougher grade is required for interrupted or variable cuts. How many cutting edges are available per insert? The indexable component features a double‑sided design, providing two usable edges to extend service life before indexing or replacement. Is the insert compatible with standard SNMG holders? Yes, the insert follows the ISO SNMG150612 format and is compatible with holders matched to that ISO designation, taking into account form, thickness and clamping style. What is the benefit of the T9225 grade? The T9225 grade combines a robust carbide substrate with a CVD coating, offering enhanced toughness and wear resistance that supports productive turning under fluctuating engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150612 T9225 Wendeplatten - Tungaloy
The combination of a robust T9225 CVD-coated carbide grade and the ISO-compliant SNMG geometry ensures reliable performance in medium-to-heavy steel turning; the reversible, double-sided design extends tool life and reduces tool change frequency. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. SNMG150612 T9225 turning insert — ISO SNMG, CVD-coated carbide for turning The SNMG150612 T9225 is an ISO-standard indexable insert for external and internal turning, designed to deliver toughness and consistent cutting performance in medium-to-heavy steel applications. SNMG150612 geometry, ISO-compliant CVD-coated carbide grade T9225 for steel Double-sided chipbreaker for varied cuts Cylindrical hole and 90° orientation Dependable cutting performance for medium-to-heavy steel The combination of the T9225 grade and a CVD coating provides a balance of toughness and wear resistance that suits interrupted cuts and variable engagement. The insert’s configuration yields stable cutting behaviour under changing conditions, which translates into predictable tool life and fewer unplanned stops. For workshops seeking a mix of durability and consistent surface finish, this plate supports productive machining cycles while helping to maintain dimensional control. Seamless integration into ISO tool systems Manufactured to ISO specifications, the plate’s SNMG geometry, 15 mm size and 6.35 mm thickness fit common ISO holders when matched by form, clearance, tolerance class and fixing style. The cylindrical hole and 90° orientation ensure secure clamping and straightforward indexing, simplifying tool change procedures and minimising set-up time. Clear dimensional data (including a 1.2 mm corner radius) allows engineers to select compatible holders and clamping kits with confidence. Reliable chip control and operational economy Equipped with a double-sided chipbreaker, the insert gives controlled chip formation across a range of feeds and depths, reducing rework and improving surface quality. Its reversible nature effectively doubles the usable edges per insert, supporting cost-efficient production runs. Combined with a suitable holder and the correct clamping shim and screws, the system offers stable cutting conditions and repeatable results for both external and internal turning. Contact Metav Werkzeuge for tailored cutting solutions and advice on integrating Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6780760 Manufacturer SKU: TUN6780760 SKU: 6780760-Tungaloy Material: cemented carbide Facts Geometry: SNMG150612 Grade/coating: T9225, CVD-coated Corner radius: 1.2 mm Plate size: 15 mm Plate thickness: 6.35 mm Clearance/rake: 0° Orientation: 90° Hole style: cylindrical hole Mounting: with hole Special features ISO-series indexable turning insert Double-sided chipbreaker Reversible insert for two usable edges Suitable for external and internal turning Optimised for medium-to-heavy steel machining Compatibility requires matching holder form and tolerance Part of a system with holder, shim and clamping screw FAQ What materials is this insert intended for? The insert is specified for medium-to-heavy steel machining and uses the T9225 CVD-coated cemented carbide grade to provide the required toughness and wear resistance. How does the SNMG150612 shape affect mounting and cutting? The SNMG shape is ISO-compliant; its 15 mm size, 6.35 mm thickness and cylindrical hole permit secure clamping in compatible holders and support stable 90° orientation for turning operations. Can the insert be used for interrupted cuts? Yes, the T9225 grade offers enhanced toughness suitable for interrupted cuts and varying engagement, and the double-sided chipbreaker helps manage chip formation under such conditions. How many cutting edges are available per insert? The plate is reversible and double-sided, providing two usable edges per index, which increases operational economy and reduces replacement frequency. Which holders or accessories are required to complete the system? A matching ISO holder, appropriate clamping shim or pad, and replacement screws are part of the required system to ensure correct fit and secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150612 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9225 grade combined with an ISO SNMG geometry and a double-sided, square form for robust medium-to-heavy steel turning; the result is improved process stability and predictable tool life. Order the insert directly via Metav Werkzeuge or consult the technical team for compatibility and cutting recommendations. SNMG 150612 T9225 Turning Insert by Tungaloy — ISO SNMG, 90° square insert The SNMG150612 T9225 is an ISO-standard indexable insert engineered for external and internal turning, offering a robust CVD-coated carbide grade suited to interrupted and heavy engagement conditions. CVD-coated carbide grade T9225 Robust for medium to heavy steel machining Double-sided square insert, 90° cutting geometry 6.35 mm plate thickness, cylindrical hole Reliable performance for medium-to-heavy steel turning The combination of a CVD-coated surface and a tough carbide substrate provides a balance between wear resistance and fracture toughness that benefits roughing and semi-finishing operations. The T9225 grade is developed for situations with variable cutting conditions or lightly interrupted cuts, offering enhanced resistance to chipping while maintaining an economical grinding and reindexing cycle. This makes the insert an efficient choice when aiming to reduce tool change frequency and maintain consistent component tolerances during sustained production runs. Simple integration into ISO-based tool systems Compatibility is determined by insert shape, relief angle, tolerance class, fastening method, size and thickness; the SNMG format conforms to these ISO parameters, easing selection for standard turning toolholders. The insert features a 90° square form with a 1.2 mm corner radius and a 0° relief angle, plus a cylindrical hole for reliable clamping and indexing. A complete system typically comprises the ISO insert, a matching external holder or boring bar, a shim/locating pad and replacement clamping screw. Specifying these geometric and tolerance details at ordering prevents mounting errors and ensures repeatable performance. Productivity gains and process stability through informed selection A double-sided chipbreaker and the universal character of the grade support higher material removal rates with predictable chip control when matched to workpiece rigidity and cutting data. Selecting the correct chipbreaker and grade for the workpiece and machining setup yields measurable benefits such as longer in-service life, fewer interruptions for insert changes and improved surface finish. For facilities seeking to optimise cycle time and reduce overall machining cost per part, the insert’s indexable nature and robust carbide construction contribute to a steady production flow and reduced tool inventory complexity. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts, compatibility checks and cutting-parameter recommendations; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the SNMG150612 T9225 and system options Technical Data Article number: 6781271 Manufacturer SKU: TUN6781271 SKU: 6781271-Tungaloy Model series: ISO turning indexable inserts Material: carbide Grade/coating: T9225 (CVD-coated) Facts Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 15 Geometry angle: 90° Rake/free angle: 0° Hole: cylindrical Special features Double-sided chipbreaker Square plate form Compatible with external and internal turning Suitable for medium to heavy steel machining ISO-standard insert SNMG150612 FAQ What materials is this insert designed for? The Tungaloy SNMG150612 T9225 insert is designed primarily for medium to heavy steel machining and performs well under variable engagement or lightly interrupted cutting conditions. How does the T9225 grade differ from standard grades? T9225 is a CVD-coated carbide grade formulated for increased toughness compared with purely wear-focused grades, offering stable chip formation and reduced chipping risk in tougher turning operations. Can the SNMG150612 be used on internal turning operations? Yes, the SNMG-format insert is suitable for both external and internal turning when paired with a compatible boring bar or internal holder designed for SNMG inserts. What does the 1.2 mm radius mean for component finish? A 1.2 mm corner radius balances edge strength and surface quality: it supports higher cutting forces while still enabling acceptable surface finishes in roughing and semi-finishing passes. Is a specific clamping system required for this insert? The insert uses a cylindrical hole and standard ISO clamping principles; compatibility depends on holder form, relief angle and tolerance class — selecting matching components ensures repeatable seating and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150612 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of high process reliability, a tough CVD-coated carbide grade and ISO compatibility for consistent turning performance; order or request application support via Metav Werkzeuge for fast integration into production. SNMG150612 T9235 Tungaloy turning insert — ISO SNMG, CVD‑coated carbide The SNMG150612 T9235 is an ISO‑sized turning insert for external and internal turning, offering a tough CVD‑coated carbide grade suited to steel workpieces and interrupted cuts. ISO‑standard SNMG geometry CVD‑coated carbide, tough grade T9235 Optimised for steel and interrupted cuts Double‑sided chipbreaker, 1.2 mm corner radius High reliability and predictable machining results The CVD‑coated carbide grade T9235 is developed for stable performance under less-than-ideal conditions, delivering a balance of toughness and wear resistance. Used in ISO‑standard SNMG geometry, this insert provides a predictable cutting edge life even in interrupted or unstable cuts, reducing unscheduled tool changes and downtime. The coating improves oxidation resistance at the tool edge while the substrate core maintains fracture toughness, which together contribute to lower part cost per component and a more economical machining process. Easy integration with existing holders and clear selection criteria Compatibility is determined by the insert form, clearance angle, tolerance class, fixing method, size and thickness; the SNMG150612 series conforms to ISO dimensions for straightforward retrofitting. With a 15 mm inscribed circle and 6.35 mm thickness, the insert fits common SNMG external holders and boring bars. The double‑sided chipbreaker design means two usable cutting edges per side, improving uptime and reducing inventory complexity. For reliable holder selection, consult the system specification or Metav Werkzeuge’s application guides to match the correct seat and clamping set. Practical benefits for turning steel under interrupted conditions A 1.2 mm corner radius provides robustness at the nose for interrupted cuts while maintaining acceptable surface finish on roughed profiles. The zero-degree clearance (0°) and the square plate form yield effective support in the pocket and predictable chip flow when paired with the double‑sided chipbreaker. The combination of CVD coating and a tough carbide substrate makes this insert particularly suitable for steel machining where occasional knocks or variable cutting forces occur. The Tungaloy insert thus supports cost‑effective, repetitive production with consistent part quality. Contact Metav Werkzeuge for targeted application advice on the SNMG150612 T9235 Tungaloy turning insert (SKU: 6786022-Tungaloy), or request detailed cutting data and availability by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6786022 Manufacturer SKU: TUN6786022 SKU: 6786022-Tungaloy ISO designation: SNMG150612 Grade: T9235 Application: Turning Facts Inscribed circle: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Insert angle: 90° Special features CVD‑coated carbide, tough grade T9235 Double‑sided chipbreaker Square plate form With cylindrical hole ISO turning insert series Suitable for external and internal turning Compatible with matching external holders and clamping sets FAQ What materials is this insert intended for? The SNMG150612 T9235 insert is specified for steel machining; the T9235 grade is a tough CVD‑coated carbide optimised for steel and interrupted cuts. How many edges are usable on the insert? As a double‑sided SNMG plate, the SNMG150612 T9235 turning insert offers multiple usable cutting edges due to its reversible geometry, which increases utilisation per insert. Which holders are compatible with SNMG150612 inserts? Compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness; SNMG150612 fits standard SNMG external holders and appropriate boring bars when the pocket matches ISO dimensions. Is the insert suitable for roughing interrupted cuts? Yes, the tough grade T9235 and 1.2 mm corner radius make the SNMG150612 well suited to roughing and interrupted cutting conditions where edge robustness is required. Can the SNMG150612 T9235 be used for finishing passes? While designed mainly for robustness in unstable conditions, the insert can achieve acceptable surface finish in finishing operations if cutting parameters are optimised for the CVD‑coated carbide grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150616 AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide and a double-sided chipbreaker for consistent chip control and extended tool life; reliable 90° geometry ensures predictable results in turning operations. Order the insert directly via Metav Werkzeuge or ask our consultants for application-specific guidance. SNMG150616 AH120 — ISO turning insert, PVD-coated carbide, 90° square by Tungaloy The SNMG150616 AH120 turning insert is designed for external and internal turning, offering a sharp cutting edge and process-secure performance for ISO-compatible holders. ISO 90° square geometry PVD-coated carbide grade AH120 Double-sided chipbreaker Cylindrical hole for secure clamping Stable cutting and consistent process security The insert delivers stable cutting through a combination of a sharp edge and a PVD coating, which reduces flank wear and protects the substrate. The carbide substrate provides rigidity and heat resistance, so the component stays dimensionally accurate during longer cycles. By choosing a grade engineered for wear and fracture resistance, manufacturers gain improved first-pass quality and fewer interrupted cycles, which directly supports productivity targets and reduces scrap rates. Clear compatibility and secure clamping for easy integration ISO standardisation simplifies tool selection: the square 90° geometry and the cylindrical hole match typical ISO holders when form, clearance angle, tolerance class, fixation method, size and thickness align. The insert’s 6.35 mm thickness and 15 mm size provide predictable seating height and stable clamping; the cylindrical hole ensures repeatable locating and torque transmission. This clarity in mounting reduces set-up time and contributes to reproducible processing conditions on production lathes. Coating and grade explained for reliable tool life The AH120 designation identifies a PVD-coated carbide designed to resist wear and chipping under turning loads. PVD (physical vapour deposition) produces a thin, adherent layer that lowers friction and delays adhesion of built-up edge, especially in interrupted cuts. With a 1.6 mm corner radius, the insert balances edge strength and surface finish capability, enabling economical machining of a wide range of steels and alloyed materials while maintaining good surface integrity. Operational benefits for workshop productivity A double-sided chipbreaker provides two usable cutting edges per indexation, cutting tooling costs and downtime. The 90° square form is versatile for both facing and profile turning tasks, improving tool change flexibility. Overall, this insert supports shorter cycle times and predictable tool-change intervals, which helps planning and reduces unscheduled stoppages. For practical workflows, compatibility with common ISO holders and the robust grade selection promote stable, repeatable performance in series production. Contact Metav Werkzeuge to discuss application fit and secure the Tungaloy SNMG150616 AH120 insert for enhanced process reliability Technical Data Manufacturer article number: 6811981 SKU: 6811981-Tungaloy Manufacturer SKU: TUN6811981 Model series: ISO turning indexable inserts Core Specifications Insert designation: SNMG150616 Insert size: 15 mm Thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Insert angle: 90° Features & Materials Material: carbide Coating: PVD Coating grade: AH120 Chipformer: double-sided Plate form: square Hole: with cylindrical hole Application: turning FAQ What applications suit this insert best? This SNMG150616 AH120 insert from Tungaloy is intended for external and internal turning and performs well where a sharp cutting edge and process security are required. Which materials can be machined with this grade? The AH120 PVD-coated carbide insert is optimised for a broad range of steels and alloyed materials; choose the chipbreaker and cutting parameters to match specific workpiece properties when using the SNMG150616 AH120. How is the insert clamped in the holder? The square insert uses a cylindrical hole and common ISO seating; the cylindrical hole design ensures repeatable locating and secure clamping for the SNMG150616 AH120 (SKU 6811981-Tungaloy). How many usable edges does the insert offer? With its double-sided chipbreaker, the indexable insert provides two usable edges per face and supports economical edge changes for continuous production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150616 AH6225 Wendeplatten - Tungaloy
Reliable machining performance is achieved through the combination of a PVD-coated carbide grade engineered for stainless steels and a 1.6 mm corner radius that balances edge strength with cutting precision; the ISO compatibility ensures straightforward holder interchange. Order the SNMG 150616 AH6225 turning insert directly via Metav Werkzeuge or consult our specialists for application support. SNMG 150616 AH6225 — ISO turning insert by Tungaloy, PVD-coated carbide SNMG 150616 AH6225 is an ISO-format, square turning insert designed for external and internal turning in demanding, variable conditions PVD-coated carbide AH6225 for rostfrei applications Universal grade optimised for stainless steels Double-sided chipbreaker for reliable chip control Square 90° geometry, 1.6 mm corner radius Precision and productivity for stainless-steel turning The SNMG 150616 AH6225 insert combines a PVD-coated surface treatment with a wear-resistant carbide body to deliver steady performance in medium cutting operations on stainless steels. The PVD layer reduces flank wear and improves thermal stability, which directly increases tool life and process reliability. The square geometry with a 90° approach angle provides a robust cutting edge for shoulders and facing, while the 1.6 mm corner radius balances strength and surface finish. This technical setup translates into consistent part quality and reduced downtime during batch production. Reliable chip control and holder compatibility for stable production Equipped with a double-sided chipbreaker and a cylindrical locating hole, the insert offers predictable chip formation across varying feeds and depths of cut. The cylindrical hole and ISO form ensure secure seating in standard insert holders, reducing setup time and minimising clamping-related vibration. For operations that alternate between roughing and finishing, selecting the AH6225 grade means a sharp, stable cutting edge that tolerates variable conditions without excessive regrinding, helping to maintain throughput and lower overall tooling costs. Application guidance and technical clarity for process planning The PVD-coated grade AH6225 is intended as a universal solution for turning tasks where stainless steels are predominant; it is suitable for both external and internal turning applications. The insert thickness of 6.35 mm and square plate size make it compatible with common ISO insert seats, while the 0° clearance angle offers a neutral cutting geometry for general-purpose turning. For process engineers unfamiliar with indexable tooling, PVD coating refers to a thin, hard layer deposited by physical vapour deposition, which enhances wear resistance without compromising toughness — a practical compromise between coating durability and edge integrity. For expert advice on integrating the SNMG 150616 AH6225 insert into existing toolsets, contact Metav Werkzeuge — our consultants can recommend holders, cutting data and process parameters to match specific production needs. Technical data Article number: 6903199 SKU: 6903199-Tungaloy Manufacturer SKU: TUN6903199 Manufacturer article number: 6903199 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 1.6 mm Clearance angle: 0° Insert thickness: 6.35 mm Insert size: 15 Angle: 90° Special features Grade/coating: AH6225, PVD-coated carbide Geometry: SNMG (square, 90°) Chipbreaker: double-sided Hole: with hole Hole style: cylindrical hole Application: turning FAQ What materials is this insert best suited for? The SNMG 150616 AH6225 insert is optimised for machining stainless steels; the AH6225 PVD-coated carbide grade provides a balanced edge for medium machining and variable conditions. Is the insert reversible or single-use? This SNMG-format indexable plate is double-sided, allowing rotation to a fresh cutting edge and extending usable life before replacement. Which holder types are compatible with this ISO insert? Compatibility is determined by ISO form, size, thickness and hole style; the SNMG 150616 fits standard square ISO holders with a cylindrical locating pin and matching seat dimensions. How does the PVD coating affect performance? The PVD coating on the AH6225 grade increases wear resistance and thermal stability, resulting in longer edge life and improved consistency when turning rostfrei materials. What cutting edge radius and geometry should be selected for finishing passes? The 1.6 mm corner radius provides a compromise between strength and surface finish; for finer finishing, consider smaller radii where the holder and grade allow. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150616 AH6235 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH6235 grade and a 90° SNMG geometry with a 1.6 mm corner radius for reliable machining of stainless steel and interrupted cuts. Order genuine Tungaloy indexable inserts via Metav Werkzeuge or consult our specialists for process-matched recommendations. SNMG150616 AH6235 indexable insert — Turning, PVD-coated carbide by Tungaloy The SNMG150616 AH6235 is an ISO-standard square indexable insert for turning, designed for enhanced edge security in stainless steel and applications with interrupted cuts. PVD-coated carbide grade AH6235 Optimised for stainless steel machining Square 90° geometry with central hole Double-sided chipbreaker, reversible use Consistent cutting performance where it matters The combination of a PVD-coated surface and the AH6235 tougher grade delivers greater resistance to edge fracture and predictable wear behaviour in demanding turning operations. The coating reduces adhesion and built-up edge formation while the substrate maintains edge strength, resulting in steady cutting forces and longer in-process intervals. For production environments this means fewer interruptions, improved component consistency and a measurable productivity benefit. Straightforward integration into ISO turning systems Designed as an ISO-standard plate, the insert matches common holder geometries and mounting principles; compatibility is determined by form, clearance angle, tolerance class, attachment, size and thickness. The plate's central cylindrical hole and 6.35 mm thickness ensure secure clamping and interchangeability with many ISO external holders or boring bars. Clear specification of dimensions simplifies tool selection and reduces set-up time, supporting faster machine availability in mixed-production runs. Practical workshop advantages and process reliability The 90° square geometry with a corner radius 1.6 mm provides a balance between edge strength and finish quality for external and internal turning. The double-sided chipbreaker extends the number of usable cutting edges, lowering tooling costs per part and enabling predictable chip control in interrupted cuts. The insert's design also aids stable chip formation on stainless steel, reducing the risk of snarled or jagged chips that can compromise cycle time and component surface quality. For tailored technical advice or to secure original Tungaloy SNMG150616 AH6235 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert support and prompt delivery Technical Data Manufacturer article number: 6903392 SKU: 6903392-Tungaloy Manufacturer SKU: TUN6903392 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: SNMG150616 AH6235 Facts Corner radius: 1.6 mm Geometry angle: 90° Plate thickness: 6.35 mm Plate size: 15 mm Hole style: cylindrical Clearance/freely angle: 0° ISO code: 150616 Special features PVD-coated carbide substrate Grade: AH6235 Double-sided chipbreaker Square plate form, reversible use Central cylindrical hole for secure clamping Application: Turning, suited to stainless steel and interrupted cuts FAQ What materials is this insert best suited for? The SNMG150616 AH6235 Tungaloy indexable insert is engineered for machining stainless steel and performs especially well in interrupted cutting where edge robustness is required. How does the corner radius affect machining results? A corner radius of 1.6 mm increases edge strength and distributes cutting forces, improving resistance to chipping and contributing to consistent surface finish when turning. Will this insert fit common ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, attachment and size; the SNMG150616 fits ISO-standard holders designed for 15 mm square plates with 6.35 mm thickness and a central cylindrical hole. Can the insert be indexed to present fresh edges? Yes — the double-sided chipbreaker indicates reversible use, allowing indexing to fresh cutting edges to extend service life and reduce tooling costs per part. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150616 T515 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide and a 1.6 mm corner radius for stable, economical turning of cast iron; the ISO format ensures straightforward holder compatibility. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNMG 150616 T515 ISO turning insert for turning — Tungaloy, 1.6 mm radius SNMG 150616 T515 is an ISO-format indexable insert designed for economical turning operations, particularly suited to cast iron machining when paired with an appropriate holder and clamping set ISO 150616 format for standard holders CVD-coated carbide grade T515 Double-sided chipbreaker for consistent chips Square form, 15 mm size, 6.35 mm thickness High-efficiency turning for cast iron with CVD-coated carbide The insert combines a CVD-coated carbide substrate with the T515 grade to deliver reliable performance in the economic machining of cast iron. The CVD layer increases wear resistance and thermal stability, which translates into longer tool life under regular turning conditions and less frequent index changes. As a consequence, process costs are reduced and cycle times become more predictable. Where vibration and interrupted cuts are encountered, selecting the matching chipbreaker and grade helps maintain surface quality while protecting the cutting edge. ISO compatibility and secure clamping for dependable set-up Engineered to the ISO 150616 format and supplied with a cylindrical hole, the insert fits common square-seat holders and boring bars when form, clearance angle, tolerance class, fastening and thickness are matched. The square form with a 1.6 mm corner radius provides a robust cutting edge suitable for a range of turning tasks; the double-sided arrangement increases usable indexed edges, helping to extend service intervals. The 0° relief angle and 90° included angle mean predictable seating geometry; ensure the selected holder matches these parameters for correct positioning and repeatable results. Practical selection guidance and system composition for workshops For external and internal turning, choose the chipbreaker style and the T515 grade according to material stability, interrupted cuts and the desired cutting speed. The system comprises the ISO insert, a matching external holder or boring bar, a shim or clamp set and replacement screws — a complete assembly that supports quick replacement and minimised downtime. The 1.6 mm corner radius balances edge strength and achievable surface finish, making this insert suitable for general-purpose roughing and semi-finishing in cast iron applications while keeping machining stable and productive. Contact Metav Werkzeuge today for tailored application advice on the Tungaloy SNMG 150616 T515 indexable insert or to request a quote; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6744298-Tungaloy Manufacturer SKU: TUN6744298 Manufacturer article number: 6744298 Brand: Tungaloy Material: Carbide Grade/coating: T515 (CVD-coated) Facts Corner radius: 1.6 mm Plate thickness: 6.35 mm Plate size: 15 mm Included angle: 90° Relief/freely angle: 0° Hole: cylindrical hole Special features Square form Double-sided chipbreaker Suitable for turning (external and internal) Economic choice for cast iron machining System: ISO insert + holder + shim/clamp + replacement screws FAQ What materials is this insert best suited for? The SNMG 150616 T515 indexable insert is optimised for economic machining of cast iron, with the T515 grade and CVD coating providing wear resistance and stable cutting behaviour. How does the T515 grade influence cutting performance? T515 is a CVD-coated carbide grade engineered to improve wear resistance and thermal stability; in practice, the Tungaloy T515 grade reduces flank wear and extends tool life under standard turning conditions. Is the insert reversible and how does the double-sided chipbreaker help? The square form with a double-sided chipbreaker allows additional indexed edges, enabling multiple repositions before replacement and supporting consistent chip formation for more predictable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150616 T9205 Wendeplatten - Tungaloy
Take advantage of a CVD-coated T9205 carbide grade for productive steel turning, combined with ISO interchangeability and a robust 1.6 mm corner radius for reliable edge life; order the SNMG150616 T9205 Tungaloy insert directly via Metav Werkzeuge or consult the technical team for tailored cutting data. SNMG 150616 T9205 Tungaloy indexable insert for turning — CVD-coated carbide, 1.6 mm radius The SNMG150616 T9205 is a square ISO indexable insert engineered for productive external and internal turning of steel under stable machining conditions, offering consistent edge retention and straightforward integration into standard holders. ISO-standard square insert with cylindrical hole CVD-coated carbide T9205 for steel 1.6 mm corner radius for increased strength Double-sided chipbreaker for consistent chips Maximise machining productivity with a wear-resistant CVD grade The CVD-coated T9205 carbide is formulated for productive turning of steel, permitting elevated cutting speeds where machine and setup stability allow. The CVD (chemical vapour deposition) coating forms a thin, hard layer that reduces flank wear and improves thermal resistance; this translates into longer tool life and fewer insert changes during a production shift. For operations focused on throughput, the coated grade supports steady machining performance and predictable tool-change intervals, helping to reduce unplanned downtime. Fast integration thanks to ISO geometry and standard fit Conformity with the ISO insert system ensures straightforward interchangeability: the square ISO form, cylindrical hole, specified tolerance class, relief geometry and the 6.35 mm thickness match common external holders and boring bars. This modular approach simplifies spare-part management and shortens set-up times, as holders do not need modification to accept the insert. The 90° included angle and 0° clearance angle make the geometry well suited to a broad range of external turning tasks while preserving cutting-edge stability. Reliable chip control and stable cutting for predictable results The double-sided chipbreaker is designed to manage chip form when machining steel, promoting controlled breaking and evacuation under the intended cutting conditions. Stable chip formation lowers the risk of surface damage and tool edge failure, which in turn supports consistent component quality and repeatable cycle times. Selecting the correct chipbreaker and insert grade according to workpiece material, cutting parameters and machine rigidity delivers measurable productivity benefits and improved surface finish. Practical handling, identification and application notes The insert is supplied in the SNMG150616 format with a 1.6 mm corner radius and a square plate size of 15 mm, making it suitable for a wide range of medium-duty turning operations. The component material is carbide, matched to the T9205 coating for wear resistance during steel turning. Identification is simplified by the manufacturer SKU and article numbers, which aid inventory control and reordering in production environments. For machining data, choose feeds and speeds that reflect the machine rigidity and fixture stability; modestly conservative parameter adjustments will extend insert life without sacrificing productivity. For assured process stability with Tungaloy’s SNMG150616 T9205 inserts, contact Metav Werkzeuge to request tailored cutting recommendations or to place an order through the specialised team Technical data Article number: 6785745 Manufacturer item no.: TUN6785745 SKU: 6785745-Tungaloy Core specifications Thickness: 6.35 mm Plate size: 15 mm Corner radius: 1.6 mm Included angle: 90° Clearance (relief) angle: 0° Special features CVD-coated carbide (T9205) Double-sided chipbreaker Square plate form Cylindrical hole ISO indexable turning inserts series Application: turning of steel FAQ What steels is this insert best suited for? The SNMG150616 T9205 insert is optimised for machining a wide range of steel grades under stable cutting conditions; the T9205 coating improves wear resistance at higher cutting speeds. Is the insert compatible with standard ISO external holders? Yes, the SNMG150616 follows ISO geometry and fits holders that accept square inserts with a cylindrical locating hole and the corresponding tolerance class. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker on this insert supports reproducible chip formation and easier evacuation, which helps maintain surface quality and tool life during continuous turning. What are the key dimensional references for setup and holder selection? Relevant dimensions include the 15 mm plate size, 6.35 mm thickness and 1.6 mm corner radius; the 90° included angle and cylindrical hole must match the chosen holder. Can the insert be used for internal turning as well as external turning? Yes, the SNMG150616 design is suitable for both external and internal turning applications when the correct holder and cutting parameters are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150616 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T9215 for high wear resistance and robust 1.6 mm corner radius for edge security to maintain steady productivity in medium steel turning; order the SNMG150616 T9215 Tungaloy insert directly via Metav Werkzeuge or ask the consultants for application advice. SNMG 150616 T9215 Tungaloy indexable insert for turning, CVD‑coated carbide SNMG 150616 T9215 is an ISO‑format, square indexable insert designed for external and internal turning applications where productivity and tool life are priorities. *SNMG 150616 format, square 90° insert *CVD‑coated carbide grade T9215 for steel machining *1.6 mm corner radius for robust edge strength *Double‑sided geometry with central mounting hole *6.35 mm plate thickness for stable cutting Consistent cutting performance for medium steel machining The CVD‑coated T9215 grade combines high wear resistance with reliable fracture toughness, making it particularly effective in medium steel operations. The coating enhances thermal stability and adhesion, which supports longer tool life during extended production runs. For continuous to slightly interrupted cuts the grade sustains consistent performance while reducing flank wear, so fewer tool changes are required and overall process efficiency improves. Selecting a matching chipbreaker and appropriate cutting parameters ensures the cutting edge is used efficiently and material removal rates remain high. Stable geometry and secure clamping reduce downtime The ISO designation and square form factor ensure predictable seating and orientation in standard external holders and boring bars. The SNMG 150616 format features a central mounting hole (cylindrical) and a 6.35 mm thickness, providing a solid clamping interface and improved resistance to torsion under load. The 1.6 mm corner radius increases edge robustness for an extended life in semi‑finishing and finishing cuts, while the 90° included corner angle offers versatility across turning profiles. Compatibility is determined by insert form, clearance angle, tolerance class, fastening style, size and thickness; matching these parameters reduces setup time and improves repeatability. Process reliability and economical operation A double‑sided insert with a well‑engineered chipbreaker delivers two usable cutting edges per side, improving cost per edge and reducing inventory turnover. The double‑sided geometry together with the Tungaloy material engineering supports high productivity through consistent edge condition and stable chip control. For production environments where changeover speed and predictable tool life are priorities, the combination of T9215 grade and the SNMG geometry yields a favourable balance between wear resistance and toughness, translating to lower tooling costs over time and fewer unscheduled stops. For high‑productivity turning tasks, contact Metav Werkzeuge for supply and application support on the SNMG 150616 T9215 Tungaloy insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and quick delivery. Technical data Article number: 6773867 Manufacturer SKU: TUN6773867 SKU: 6773867-Tungaloy Model series: ISO turning indexable inserts Material: carbide Numbers / Core technical data Size: 15 mm Plate thickness: 6.35 mm Corner radius: 1.6 mm Clearance angle: 0° Included angle: 90° Special features / Designs CVD‑coated grade T9215 Double‑sided chipbreaker Square plate form Cylindrical central mounting hole Compatible with ISO external holders and boring bars Suitable for medium steel machining Intended for continuous to slightly interrupted cuts FAQ What materials is this insert suitable for? The SNMG150616 T9215 insert is optimised for medium steel machining; the CVD‑coated T9215 grade provides wear resistance and toughness for productive steel turning. Can the grade handle interrupted cuts? Yes, the T9215 formulation and the insert geometry are designed for continuous to slightly interrupted cuts, offering improved resistance to chipping under light interruptions. How is the insert secured in the holder? The insert has a cylindrical central mounting hole intended for a screw and backing plate system; secure clamping is achieved when the holder matches the ISO form, clearance and tolerance class. Which chipbreaker does the insert use and what is the benefit? The insert features a double‑sided chipbreaker enabling reliable chip control and economical use of both faces, supporting longer effective edge life in production workflows. What are the manufacturer references for ordering? Manufacturer article number 6773867 and manufacturer SKU TUN6773867 identify the SNMG150616 T9215 Tungaloy indexable insert for procurement and stock keeping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 150616 T9215 Wendeplatten - Tungaloy
High wear resistance from the CVD-coated T9215 grade combined with a 1.6 mm corner radius and a robust square 90° geometry ensures productive, repeatable turning in medium-steel applications. The insert is compatible with ISO holders that match form, relief, tolerance, fastening, size and thickness; this supports fast tool changes and predictable cycle times. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific selection and stock information. SNMG 150616 T9215 — Tungaloy turning insert (CVD-coated carbide, 1.6 mm radius) The SNMG 150616 T9215 is an ISO-standard square, double-sided indexable insert for turning, engineered for productive machining of medium steel in continuous to slightly interrupted cuts CVD-coated carbide grade T9215 Optimised for medium steel turning 1.6 mm corner radius for robustness Square, double-sided with cylindrical hole Consistent cutting performance for medium-steel production The combination of a CVD-coated surface and a carbide substrate in grade T9215 provides high wear resistance while maintaining fracture toughness under typical shop-floor conditions. This balance reduces flank and crater wear, which in turn supports longer edge life and more consistent component tolerances. Specified for medium steel, the geometry and coating enable stable cutting at production feeds and speeds, helping to maintain cycle-time targets and lower overall process cost through fewer indexings and predictable regrinds. Geometry engineered for secure clamping and stable cutting The square plate with a 90° included angle and a 1.6 mm corner radius delivers reliable edge strength and adaptable surface finish characteristics. A 0° relief angle and the cylindrical hole ensure correct seat and clamping in compatible ISO holders, while the double-sided design offers economical use of cutting edges. For operations requiring a balance between edge strength and finish, the larger corner radius reduces the risk of edge chipping on interrupted cuts and improves robustness where light roughing meets semi-finishing. ISO compatibility and straightforward tool management As an ISO-standard indexable insert, the part integrates into standard toolholder systems when form, relief angle, tolerance class, fastening, size and thickness match. With a plate thickness of 6.35 mm and a nominal plate size of 15 mm, the geometry supports rigid setups and repeatable tool offsets. The insert’s design contributes to reduced downtime: easier inventory management, simplified reindexing and fewer special holders required, which benefits operations aiming for efficient tool changeover and high utilisation of turning centres. Selective application and chip control for higher throughput The double-sided chipbreaker and the T9215 substrate make this insert a first-choice solution for many medium-steel turning tasks, particularly where continuous to slightly interrupted cuts are common. Selecting the appropriate chipbreaker and matching cutting data to the workpiece stability will further improve chip control and surface quality. In practice, the insert’s predictable performance supports process engineering aims: higher throughput, consistent surface finish and diminished scrap rates, all of which strengthen production reliability. Contact Metav Werkzeuge for application guidance and availability of the Tungaloy SNMG 150616 T9215 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise tooling advice and rapid stock information Technical data Article number: 6772301 Manufacturer SKU: TUN6772301 Model series: ISO-Drehwendeschneidplatten Material: carbide Grade: T9215 (CVD-coated) Application: turning Plate designation: SNMG150616 Facts Corner radius: 1.6 mm Relief angle: 0° Plate thickness: 6.35 mm Plate size: 15 mm Included angle: 90° Manufacturer article number: 6772301 Special features Square plate, double-sided indexable insert Cylindrical hole for secure clamping Double-sided chipbreaker Compatible with ISO holders when form, relief, tolerance, fastening, size and thickness match Optimised for medium-steel machining Suitable for continuous to slightly interrupted cuts FAQ What materials is this insert suitable for? The SNMG 150616 T9215 insert is optimised for medium steel machining; the T9215 CVD-coated carbide combines wear resistance and toughness suitable for high-productivity turning. How does the 1.6 mm corner radius affect cutting? A 1.6 mm radius increases edge strength and reduces chipping risk in interrupted cuts while offering a compromise between durability and surface finish for turning operations. Is the insert indexable on both sides? Yes — the SNMG150616 is double-sided, allowing multiple indexings and economical use of cutting edges before replacement or regrinding. What should be considered when selecting a holder? Compatibility is determined by plate form, relief angle, tolerance class, fastening method, plate size and thickness; ensure the toolholder matches these parameters for secure clamping. Which cutting conditions suit the T9215 grade? The T9215 grade is recommended as a first choice for medium-steel turning under continuous to slightly interrupted cuts, balancing wear resistance with fracture toughness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150616 T9215 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide (T9215) for high wear resistance and 1.6 mm corner radius for robust edge strength; optimise productivity in medium-steel turning and order directly via Metav Werkzeuge or consult our technical advisors for application support. SNMG 150616 T9215 Turning Insert (ISO) — CVD-coated carbide, 1.6 mm radius (Tungaloy) SNMG150616 T9215 is a square ISO turning insert designed for medium-steel machining, combining wear resistance and fracture safety in continuous and light interrupted cuts CVD-coated carbide for high wear resistance Designed for medium-steel turning operations Double-sided square insert with cylindrical central hole 1.6 mm corner radius and 90° cutting geometry Stable performance for productive medium-steel turning The SNMG insert is built on a CVD-coated carbide substrate (grade T9215) that balances wear resistance with fracture toughness, making it suitable for sustained production runs. The coating reduces abrasive wear at elevated cutting speeds while the carbide core maintains edge stability under load. This combination leads to longer tool life and fewer index changes, which in turn reduces downtime and increases machine utilisation. Compatibility with ISO turning systems ensures predictable behaviour when paired with the correct holder geometry. Secure clamping and reliable chip control for consistent finishes A cylindrical central hole and standard mounting style allow the insert to be clamped securely in a matching holder or boring bar; seating is determined by form, clearance angle, tolerance class, fastening and thickness. The double-sided chipbreaker design improves chip control and contributes to a consistent surface finish with less tendency for built-up edge in medium-steel applications. The 1.6 mm corner radius supports stronger cutting edges and helps achieve a balance between edge strength and achievable surface quality. The square plate and 90° cutting angle are particularly effective for shoulder cuts and general external turning. System compatibility and practical selection guidance for turning operations When assembling a machining system, the indexable insert works as part of a set: the ISO insert, a suitable external holder or boring bar, a shim or clamp set, and the correct fastening screws. Select the chipbreaker and grade according to the workpiece material and the nature of the cut; the T9215 grade is positioned as a first choice for medium steel machining, offering productive cycle times for both continuous and lightly interrupted cuts. Insert thickness of 6.35 mm and the plate size of 15 mm provide rigidity in the clamped state, which supports stable cutting and repeatable results across workpieces. For reliable productivity in medium-steel turning, specify the Tungaloy SNMG150616 T9215 through Metav Werkzeuge and request tailored advice from our consultants at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 6774118 Manufacturer SKU: TUN6774118 Manufacturer article number: 6774118 Model series: ISO turning indexable inserts Designation: SNMG150616 T9215 Tungaloy insert Core data Corner radius: 1.6 mm Thickness: 6.35 mm Inscribed circle / size: 15 mm Cutting geometry: 90° Clearance angle: 0° Special features CVD-coated carbide (T9215) Double-sided chipbreaker Square plate form (SNMG) Cylindrical central hole for secure mounting Suited for medium-steel turning; continuous to light interrupted cuts Compatible with ISO holders; requires matching form, clearance, tolerance, fastening, size and thickness FAQ Which materials is this insert suitable for? This insert grade T9215 is primarily intended for medium-steel machining; the SNMG150616 T9215 provides a balance of wear resistance and fracture toughness for continuous and light interrupted turning of steel. How is the insert secured in the toolholder? The insert is located by a cylindrical central hole and clamped with the appropriate shim or clamp set and screw; holder compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. What effect does the 1.6 mm corner radius have on performance? A 1.6 mm radius increases edge strength and resistance to chipping, improving durability under load while supporting an acceptable surface finish for general turning tasks. Is chip formation controlled with this insert? Yes, the double-sided chipbreaker geometry is designed to manage chip flow and reduce the risk of long, entangling swarf in typical medium-steel operations. Can this insert be used for interrupted cuts? The T9215 grade is suitable for continuous to light interrupted cuts; for heavy interruption, a more robust application-specific grade or alternative chipbreaker should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com