SNMG 150616 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade engineered for toughness and an ISO SNMG geometry that delivers consistent performance in medium-to-heavy steel turning; the 1.6 mm nose radius and robust plate thickness ensure secure seating and durable edge life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. SNMG150616 T9225 ISO turning insert — CVD-coated carbide, 1.6 mm nose radius (Tungaloy) The SNMG150616 T9225 is an ISO-standard indexable turning insert designed for medium-to-heavy steel turning, offering a universal, tough grade and a square, double-sided configuration suitable for external and internal turning. CVD-coated carbide T9225 Universal grade for medium–heavy steel Double-sided with 1.6 mm nose radius Consistent metal removal with a tough universal grade The insert uses a CVD-coated carbide grade T9225, developed for stable chip formation and productive machining across a broad range of steels. This universal grade combines hardness and toughness to resist edge chipping during interrupted cuts and variable engagement, translating into fewer indexings and lower tool-change frequency. For production shops seeking predictable cutting performance, the coating improves wear resistance while the substrate preserves toughness where it matters most. Secure seating and dimensional features for rigid turning setups Mechanical stability is essential for accurate turning. The square geometry with a 6.35 mm thickness and a cylindrical hole provides secure clamping in compatible ISO SNMG holders; the 0° clearance angle supports a consistent cutting edge orientation. These dimensional characteristics reduce vibration and support consistent surface finish quality when the holder, underlay and fastening hardware are matched to ISO-standard specifications. Compatibility is determined by form, clearance angle, tolerance class, fastening type, size and thickness. Practical advice for productive machining The double-sided chipbreaker design increases indexable life by providing two cutting edges per seat and supports good chip control in a variety of turning conditions. The 1.6 mm nose radius favours strength and stability for medium to heavy cuts while still enabling acceptable surface finish in many applications. For best results, select the chipbreaker and grade based on workpiece stability and feed parameters; moderate feeds with stable fixturing exploit the grade’s toughness and minimise flank wear. System considerations and recommended setup An efficient setup comprises the ISO SNMG150616 insert, a matching external or boring holder, appropriate underlay or clamp set and the correct replacement screws. Ensuring holder compatibility—in terms of seat form, tolerance and fastening—keeps the insert seated firmly and maintains cutting geometry, which is especially important for interrupted cuts and variable engagement. The insert is intended for turning operations and is particularly suitable where a balance of wear resistance and toughness is required. For reliable medium-to-heavy steel turning, specify the Tungaloy SNMG150616 T9225 insert via Metav Werkzeuge and request application guidance from our specialists at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6781294 Manufacturer SKU: TUN6781294 Manufacturer: Tungaloy Model series: ISO turning insert series Material: Carbide Application: Turning Facts Nose radius: 1.6 mm Thickness: 6.35 mm Size: 15 mm Insert angle: 90° Clearance angle: 0° Hole: with cylindrical hole Special features CVD-coated carbide grade T9225 Square plate, double-sided chipbreaker ISO SNMG150616 designation Robust universal grade for medium–heavy steel Suitable for interrupted cuts and variable engagement FAQ What materials is this insert intended for? The SNMG150616 T9225 Tungaloy turning insert (SKU 6781294-Tungaloy) is optimised for medium-to-heavy steel machining and performs well under varying engagement and interrupted cuts. Can the insert be used on both external and internal turning operations? Yes. The ISO-design SNMG150616 is suitable for external and internal turning when paired with the correct external holder or boring bar and the appropriate clamping accessories. How does the CVD coating affect performance? The CVD-coated carbide T9225 on this Tungaloy insert improves wear resistance while the substrate maintains toughness, giving a balance between life and edge strength for production turning. What should be checked for holder compatibility? Ensure the holder matches the insert in form, free angle, tolerance class, fastening method, size and thickness to guarantee secure seating and consistent cutting geometry for the SNMG150616 insert. Is the chip control suitable for interrupted cuts? The double-sided chipbreaker of this insert supports good chip control and, together with the T9225 grade’s toughness, performs reliably in interrupted or variable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150616 T9225 Wendeplatten - Tungaloy
Combining the robust CVD-coated carbide of grade T9225, the ISO SNMG150616 format and a 1.6 mm nose radius delivers consistent performance for mid-to-heavy steel turning; order directly via Metav Werkzeuge or consult the specialists for tailored recommendations. SNMG150616 T9225 indexable turning insert for turning (Tungaloy) SNMG150616 T9225 is an ISO-format indexable insert engineered for external and internal turning applications, offering a balance of toughness and wear resistance for variable cutting conditions. CVD-coated carbide for robust steel machining Double-sided chipbreaker for interrupted cuts ISO SNMG format, 1.6 mm nose radius Cylindrical hole for secure clamping Consistent performance under variable cutting conditions The CVD-coated carbide composition of grade T9225 is designed as a robust universal grade for mid-to-heavy steel machining where variable engagement or lightly interrupted cuts demand extra toughness. The CVD coating increases surface hardness and enhances wear resistance while the substrate maintains fracture toughness, which together promote stable chip formation and extended tool life. For production environments seeking reproducible results, this combination supports higher average cutting rates and reduces the frequency of insert changes, improving overall process efficiency. ISO compatibility and secure clamping reduce setup time As an ISO SNMG insert, the geometry follows standardised dimensions so compatibility with matched holders is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The insert’s square form, 6.35 mm thickness and 15 mm size ensure a stable support area, while the cylindrical hole enables secure clamping and repeatable index changes. The listed 0° clearance angle and the 90° approach angle offer predictable cutting behaviour in general turning tasks. These features minimise setup complexity and shorten downtime during tool changes, supporting continuous production workflows. Chip control and grade selection for longer tool life The double-sided chipbreaker provides flexibility: selecting the correct chip geometry and the T9225 grade suits a wide range of steels and interrupted cuts, helping to avoid built-up edge and erratic chip shapes. Proper pairing of chipbreaker and insert grade reduces cutting forces and heat concentration, which in turn extends the life of both insert and holder. For workshops and CNC shops aiming to raise part quality and reduce rework, the result is improved surface finish and more predictable tool consumption. If unsure which chipbreaker profile best matches an application, Metav Werkzeuge’s technical advisors can assist with selection and process parameters. Contact Metav Werkzeuge for tailored grade advice and fast supply of Tungaloy SNMG150616 inserts — technical consultants are available to match the insert, chipbreaker and clamping to the specific turning task. Technical data Article number: 6780881 Manufacturer SKU: TUN6780881 Model series: ISO-Drehwendeschneidplatten Product designation: SNMG150616 T9225 Tungaloy turning insert Material: carbide Coating: CVD Facts Corner radius: 1.6 mm Thickness: 6.35 mm Plate size: 15 mm Clearance angle: 0° Approach angle: 90° Hole: with cylindrical hole Special features Double-sided chipbreaker Square plate form ISO SNMG format Suitable for external and internal turning Robust universal grade for mid-to-heavy steel machining FAQ What materials is this insert suitable for? The SNMG150616 T9225 insert is intended primarily for steel machining; the T9225 CVD-coated carbide grade is specified for robust, mid-to-heavy steel turning with variable engagement. Is the insert compatible with standard SNMG holders? Yes, the SNMG150616 follows ISO dimensions; compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness, and the insert’s cylindrical hole enables secure clamping. How does the T9225 grade perform with interrupted cuts? The T9225 grade provides additional toughness suited to interrupted cuts and varying engagement, helping to prevent chipping and maintain stable chip formation during operation. Can the chipbreaker be used on both sides of the insert? The double-sided chipbreaker on this indexable insert allows use of both cutting edges, offering economical indexing and flexibility for different cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 150616 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated cemented carbide composition and the robust universal T9225 grade for stable performance in medium to heavy steel turning; coupled with ISO conformity and a double‑sided chipbreaker, the insert provides reliable chip control and cost-effective indexability. Order the insert directly via Metav Werkzeuge or consult our technical team for holder matching and application advice. SNMG 150616 T9225 SNMG turning insert by Tungaloy — CVD‑coated carbide, 1.6 mm radius The SNMG150616 T9225 Tungaloy turning insert for ISO‑standard turning, designed for external and internal machining where toughness and process stability are required. ISO‑standard turning insert SNMG150616 CVD‑coated carbide grade T9225 Robust universal grade for medium/heavy steel Double‑sided chipbreaker with central hole Durable cutting performance for variable turning conditions The CVD‑coated cemented carbide composition in this turning insert delivers a balanced combination of wear resistance and toughness, making it suited to medium to heavy steel machining where cutting conditions may vary or feature light interruptions. The CVD process produces a hard, wear‑resistant surface that reduces flank wear and extends tool life under elevated temperatures. For production environments the result is fewer index changes and more consistent cycle times, supporting a controlled and economical machining process. Simplified holder compatibility and practical selection guidance Compatibility with toolholders is determined by the insert’s shape, clearance angle, tolerance class, mounting method, size and thickness, so matching the insert to the correct clamping system avoids setup issues and unexpected runout. The square 15 mm format and the specified 6.35 mm thickness make it straightforward to pair with standard ISO external holders or adaptors. When selecting the chipbreaker and grade, opt for the double‑sided chipbreaker for general turning tasks and choose an insert geometry that supports the required entry angle and feed to maintain surface finish and tool life. Benefits for everyday shop use: productivity, stability and economy The universal T9225 grade is formulated to give stable performance across a wide range of steels; its toughness is especially beneficial for slightly interrupted cuts and mixed batch work. The insert’s corner radius of 1.6 mm helps to increase edge strength and improve tool life at moderate feeds, while the central cylindrical hole simplifies secure clamping and repeatable indexation. Together, these characteristics reduce downtime for index changes and contribute to predictable, repeatable machining results in small and large production runs. For precise holder matching and procurement, contact Metav Werkzeuge for tailored advice and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781348 Manufacturer SKU: TUN6781348 Stock SKU: 6781348-Tungaloy Manufacturer: Tungaloy Facts ISO designation: SNMG150616 Grade: T9225 Corner radius: 1.6 mm Thickness: 6.35 mm Size: 15 mm Clearance angle: 0° Principal angle: 90° Special features CVD‑coated cemented carbide Double‑sided chipbreaker Square insert form Central cylindrical hole Designed for external and internal turning FAQ Is this insert suitable for turning steel? Yes. The SNMG150616 T9225 Tungaloy insert is intended for medium to heavy steel machining; the CVD coating enhances wear resistance under higher temperatures. Can the insert handle interrupted cuts? The T9225 grade is a robust universal grade that offers increased toughness, making the insert suitable for light to moderate interrupted cuts and varying engagement conditions. How is compatibility with a holder determined? Compatibility depends on the insert form, clearance angle, tolerance class, mounting method, size and thickness; verify these dimensions against the toolholder specifications before mounting the SNMG150616 insert. What are the key dimensions to check before installation? Check the corner radius (1.6 mm), thickness (6.35 mm), size (15 mm), clearance angle (0°) and the presence of the central cylindrical hole to ensure the insert seats and clamps correctly. Does the double‑sided chipbreaker offer economic advantages? Yes. The double‑sided chipbreaker allows more indexable edges per insert, improving cost efficiency and reducing the frequency of insert changes during production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190608 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215, ISO conformity and a robust double-sided chipbreaker for efficient medium-steel turning; order directly via Metav Werkzeuge or consult the specialists for matching holders and mounting advice. SNMG190608 T9215 SNMG turning insert by Tungaloy — ISO square, 0° clearance A SNMG190608 T9215 ISO-standard square turning insert for medium steel turning, featuring a CVD-coated carbide substrate and a double-sided chipbreaker for stable, productive cutting. ISO square insert SNMG190608, 19 mm size CVD-coated carbide grade T9215 for steel Double-sided chipbreaker for consistent chips 0° clearance angle with cylindrical hole High-performance carbide grade for sustained productivity The CVD-coated T9215 carbide grade delivers a balance of wear resistance and fracture toughness that suits continuous to lightly interrupted turning of medium steel. The coating reduces abrasive wear at elevated temperatures, extending edge life and enabling longer production runs. This leads to fewer tool changes, more stable cycle times and improved overall machining economy. The formulation is intended for process reliability where consistent performance and reduced downtime are priorities. ISO conformity and system compatibility for straightforward integration Supplied in the ISO SNMG form, the insert conforms to established dimensions and tolerances; compatibility with a toolholder depends on matching the insert form, 0° clearance, tolerance class, fastening method, size (19 mm) and thickness (6.35 mm). The central cylindrical hole and square plate form ensure positive clamping in suitable holders. If holder geometry or clamping method differs, selecting a matching seat or clamp is essential to maintain runout and repeatability during turning operations. Chip control and surface quality that support throughput The double-sided chipbreaker is designed for controlled chip formation and evacuation in typical steel machining conditions. Stable chips reduce re-cutting and help protect the cutting edge, contributing to consistent surface finish and dimensional repeatability. The square geometry with a 0.8 mm corner radius offers a compromise between strength and edge rounding, helping to avoid chatter on medium-duty operations while supporting higher material removal rates where the machine setup and workholding are rigid. Practical handling and recommended application scope With a plate thickness of 6.35 mm and a 19 mm plate size, the insert is dimensioned for robust clamping and repeatable indexing; the 90° plate angle suits general external and internal turning when a square insert form is required. The cylindrical hole simplifies replacement and alignment. Given the T9215 grade’s design for medium steel, it is advisable to pair the insert with a holder rated for the same ISO form and to confirm clearance and tolerance class before mounting. For uncertain compatibility, Metav Werkzeuge can advise on holder options and matching screws to ensure safe, repeatable clamping. Contact Metav Werkzeuge for tailored advice on matching holders, availability and delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the SNMG190608 T9215 solution and application guidance Technical data Article number: 6773844 Manufacturer SKU: TUN6773844 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: T9215 (CVD-coated) Core specifications ISO designation: SNMG190608 Plate size: 19 mm Plate thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Approach angle: 90° Design and features Square plate form Cylindrical hole (with hole) Double-sided chipbreaker Intended application: Drehen (turning) Suitable for medium steel, continuous to light interrupted cuts FAQ What materials is this insert designed for? The SNMG190608 T9215 insert is optimised for medium steel machining; the T9215 CVD-coated carbide provides wear resistance suited to continuous and lightly interrupted cuts. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker on the SNMG190608 promotes controlled chip formation and evacuation, improving surface finish consistency and reducing the risk of edge damage during turning. Is this insert compatible with standard ISO SNMG holders? Yes — the insert follows the ISO SNMG form; compatibility requires matching holder seat form, clearance, tolerance class, fastening method, size and thickness for safe, repeatable clamping. What are the key dimensions to check when replacing an insert? Check the plate size (19 mm), plate thickness (6.35 mm), corner radius (0.8 mm), clearance angle (0°) and the presence of a cylindrical central hole to ensure correct fitment of the SNMG190608 T9215 insert (SKU 6773844-Tungaloy). How does the T9215 grade affect tool life and productivity? T9215 combines high wear resistance with fracture toughness tailored for medium steel, enabling longer edge life and more productive machining cycles with reduced tool changes when used under appropriate cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190608 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 for consistent wear resistance and breakage safety together with a 0.8 mm corner radius and square form for stable, general-purpose turning operations; order the insert directly via Metav Werkzeuge or consult our technical advisors for compatibility and delivery options. SNMG 190608 T9215 – Tungaloy indexable insert for turning The SNMG190608 T9215 is an ISO-standard indexable turning insert engineered for external and internal turning, combining a CVD-coated carbide grade with a double-sided chipbreaker for stable, high-productivity machining. CVD-coated carbide grade T9215 Optimised for medium steel machining Square insert, 0.8 mm corner radius Double-sided chipbreaker, cylindrical hole High productivity and reliable wear resistance for medium steel The CVD-coated carbide grade T9215 provides a balanced combination of wear resistance and fracture toughness, making it especially suitable for medium steel applications where consistent tool life and process reliability are required. The coating reduces flank wear under continuous cutting conditions, while the substrate core gives fracture resistance during slight interruptions. These properties translate into improved cycle times and fewer insert changes, supporting higher throughput on series and batch production tasks. Simple integration into ISO turning systems for fast setup Designed according to ISO specifications, the insert’s square form and standard dimensions ensure fast and predictable integration into compatible holders. Compatibility depends on form, relief angle (0°), tolerance class, fixing method, size and thickness, so selecting a corresponding ISO-compatible external holder or boring bar and the correct clamp/locating set prevents fitting errors. The cylindrical mounting hole facilitates secure fixation and repeatable positioning, reducing downtime during tool changes and setup. Controlled chip formation and edge stability for consistent surface finish The double-sided chipbreaker geometry is tailored for chip control in continuous to slightly interrupted cutting, improving evacuation and reducing re-cutting of chips. The 0.8 mm corner radius supports robust edge strength for general turning tasks while contributing to a predictable surface finish on turned parts. The plate’s 6.35 mm thickness and 19 mm size give mechanical stability in radial and axial loads, enabling steady contact with the workpiece and dependable dimensional results. Practical material and application notes for workshop use Made from solid carbide and finished with a CVD coating, this insert is the recommended first choice for routine machining of medium steels where a balance of life and toughness is required. The ISO plate is suitable for both external and internal turning operations; select the chipbreaker style and grade to match material, cutting mode and machine rigidity. When machining difficult workpiece geometries or heavier interruptions, consider a holder and cutting parameters that prioritise edge protection. For high-productivity turning with Tungaloy’s CVD-coated T9215 grade, contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6773860 SKU: 6773860-Tungaloy Manufacturer SKU: TUN6773860 Manufacturer: Tungaloy Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 0.8 mm Relief angle: 0° Plate angle: 90° Special features CVD-coated carbide Grade T9215 Square plate form Double-sided chipbreaker Cylindrical mounting hole ISO indexable turning plate For external and internal turning Suitable for continuous to slightly interrupted cuts FAQ What materials is this insert best suited for? The SNMG190608 with grade T9215 is optimised for medium steel machining, combining wear resistance and toughness for productive turning. How is the insert mounted in the holder? The plate has a cylindrical hole and standard ISO form; secure mounting relies on matching holder geometry, clamp set and tolerance class to the insert dimensions. Does the chipbreaker suit interrupted cuts? The double-sided chipbreaker is designed for continuous to slightly interrupted cuts; for heavy interruptions a toolpath and holder that protect the edge are recommended. Which dimensions are relevant for holder selection? Key dimensions are the plate size 19 mm, thickness 6.35 mm, corner radius 0.8 mm and relief angle 0°; these determine compatibility with ISO holders. Is this an original Tungaloy product? The SNMG190608 in grade T9215 is an original Tungaloy indexable insert produced to ISO standards and intended for professional turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190608 T9225 Wendeplatten - Tungaloy
High-performance CVD-coated carbide T9225 combined with a square, double-sided geometry and precise 0° clearance provides consistent edge life and stable cutting in medium-to-heavy turning. Order the SNMG190608 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG190608 T9225 square ISO turning insert for turning — Tungaloy SNMG190608 T9225 is a square indexable insert for ISO-standard turning applications, engineered for robust performance in medium-to-heavy steel machining. Square insert, 19 mm inscribed circle CVD-coated carbide grade T9225 Double-sided chipbreaker for stability 0° clearance angle for neutral cutting Dependable performance for demanding turning tasks The SNMG190608 T9225 insert delivers reliable machining performance through a CVD-coated carbide substrate that balances wear resistance and toughness. The T9225 grade is formulated as a robust universal grade for mid-to-heavy steel cutting where variable engagement or lightly interrupted cuts demand additional toughness. The combination of coating and substrate reduces flank wear and extends edge life, which results in fewer tool changes and improved machine uptime. This is particularly useful where process stability and repeatable results are priorities. Geometry and clamping compatibility that reduce set-up time The square ISO format and standardised form ensure compatibility with a broad range of ISO turning holders, provided the holder matches form, clearance angle, tolerance class, attachment and insert thickness. The insert’s square shape and double-sided construction give reversible edges, while the cylindrical hole offers reliable seating and indexing. Specified dimensions—a 19 mm inscribed circle and 6.35 mm thickness—facilitate straightforward tool selection and predictable clamping, simplifying tooling logistics in production environments. Practical material guidance and recommended use This indexable grade is tailored primarily for machining steel in medium-to-heavy operations. The chipbreaker geometry is optimised for efficient chip control under changing cut conditions; select the chipbreaker and grade that match component material and machine rigidity. The neutral 0° clearance helps maintain a controlled cutting direction and reduces radial loads on the holder, which is advantageous when facing mixed batch production or when changing workpiece diameters. Economic and process benefits for workshops Choosing a Tungaloy indexable insert in T9225 supports longer tool life and consistent surface finish, lowering the cost per component in serial production. The reversible, double-sided design increases the number of usable edges per insert, improving inventory efficiency. Where throughput and repeatability matter, the combination of CVD coating, robust substrate and standardised ISO geometry contributes to predictable tool behaviour and reduced process variation. For application-specific advice or to procure Tungaloy inserts such as the SNMG190608 T9225, contact Metav Werkzeuge for a concise tooling recommendation — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780688 SKU: 6780688-Tungaloy Manufacturer SKU: TUN6780688 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: T9225 Facts Radius: 0.8 mm Inscribed circle / size: 19 mm Thickness: 6.35 mm Clearance angle: 0° Cutting angle: 90° Special features CVD-coated carbide grade T9225 Double-sided chipbreaker Square insert with cylindrical hole ISO-standardised turning insert Intended for external and internal turning in steel FAQ What holder compatibility is required for this insert? The insert’s compatibility depends on holder form, free angle, tolerance class, attachment method, size and thickness; the SNMG190608 T9225 fits holders designed for ISO SNMG inserts and requires a matching seat and clamp. For which materials is the T9225 grade recommended? The T9225 grade is a robust universal grade suited to medium-to-heavy steel machining, especially when variable engagement or lightly interrupted cuts demand extra toughness. How does the chipbreaker design influence performance? The double-sided chipbreaker promotes stable chip control and improved surface finish under varying cutting conditions; it supports consistent evacuation in turning operations. What are the key dimensional specifications to check when ordering? Key dimensions are the inscribed circle (19 mm), thickness (6.35 mm), corner radius (0.8 mm) and the 0° clearance angle; confirm these match the intended holder and application. Is this insert reversible and how many cutting edges are available? The square, double-sided design provides multiple indexable edges; the exact count depends on how the insert is indexed and used in the holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190608 T9235 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade optimised for steel machining and interrupted cuts, combined with a robust square geometry and a 0.8 mm corner radius for reliable edge life; order the insert directly via Metav Werkzeuge or request application advice from our consultants. SNMG190608 T9235 turning insert (ISO) by Tungaloy A SNMG190608 T9235 indexable insert designed for external and internal turning, offering a CVD-coated carbide grade for stable performance under interrupted cuts and less stable conditions. CVD-coated carbide grade T9235 Designed for steel and interrupted cuts Double-sided with cylindrical hole Square 19 mm, 6.35 mm thickness Reliable cutting under unstable conditions The SNMG-style indexable geometry provides a predictable cutting interface that supports consistent machining in varying setups. The T9235 grade is a CVD-coated carbide developed for toughness at moderate cutting speeds, which helps to resist chipping during interrupted operations. By choosing a grade optimised for lower speeds rather than maximum hardness, shops gain improved process stability and fewer unplanned tool exchanges, delivering tangible gains in machining uptime and reproducibility. Clear compatibility and practical handling Manufactured to the ISO insert family, the component features a square 19 mm form, 6.35 mm thickness and a 0° relief angle, making compatibility determination straightforward: match holder form, relief geometry, tolerance class and clamping method. The insert’s cylindrical hole and double-sided design permit secure fastening and economical indexing. These mechanical details simplify inventory planning and reduce the need for custom fixtures, which supports efficient tool management in the workshop. Benefits for steel applications and interrupted cuts For steel machining and intermittent chip engagement, the insert’s 0.8 mm corner radius and the double-sided chipbreaker arrangement combine to produce a stable cutting edge with controlled chip formation. Controlled chip flow reduces vibration and improves surface quality, so finishing operations require less rework. The practical outcome is fewer rejected parts and higher first-pass yield, contributing to lower production costs per component while maintaining process reliability. Practical considerations and machinability guidance The CVD coating enhances resistance to flank wear while the carbide substrate supplies the toughness necessary for erratic cut conditions. When integrating this ISO-format insert, select a matching external holder or boring bar with the correct seat geometry and clamping kit; this ensures optimal contact and torque transmission. For less experienced planners, specifying the ISO standard geometry and the T9235 grade simplifies procurement and ensures interchangeable performance across compatible toolholders. Contact Metav Werkzeuge for tailored application advice on the Tungaloy SNMG190608 T9235 insert — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and delivery options Technical Data Article number: 6786043 Manufacturer SKU: TUN6786043 Model series: ISO-Drehwendeschneidplatten System designation: SNMG190608 Facts Shape: square 19 mm Thickness: 6.35 mm Corner radius: 0.8 mm Relief angle: 0° Special features Material: carbide Coating/grade: T9235 (CVD-coated) Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert suited for? The SNMG190608 T9235 insert is optimised for machining steel; the T9235 CVD-coated carbide grade offers toughness and wear resistance suited to interrupted cuts in steel workpieces. How does the insert secure to the holder? The insert uses a cylindrical hole and is designed for ISO-compatible clamping systems; correct holder selection by form and tolerance class ensures safe fastening and repeatable positioning. Is this insert economical for intermittent cutting operations? Yes; the T9235 grade and robust geometry are selected to improve edge life under interrupted cuts, reducing unplanned tool changes and supporting consistent throughput. Which dimensions are critical when selecting a matching holder? Key dimensions are the 19 mm square size, 6.35 mm thickness, 0.8 mm corner radius and the 0° relief angle; matching these parameters to the holder seat and clamp is essential for secure operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide, a sharp cutting edge and proven ISO compatibility for steady turning performance and reduced tool changes; order the insert directly via Metav Werkzeuge or request guidance from our consultants. SNMG190612 AH120 SNMG 190612 AH120 turning insert for turning (PVD-coated carbide, 90° square) – Tungaloy The SNMG190612 AH120 is an ISO-standard turning insert intended for reliable external and internal turning, combining a hard-wearing PVD-coated carbide grade with a double-sided chipbreaker for consistent cutting and process security. PVD-coated carbide for high wear resistance Double-sided chipbreaker for flexible machining 90° square geometry for secure clamping Cylindrical hole for standard screw fixation Maximise uptime with a wear-resistant PVD grade The AH120 grade is a PVD-coated carbide selected for high resistance to wear and chipping under demanding turning conditions. The coating reduces flank wear and preserves a sharp cutting edge, which translates into longer intervals between indexings and fewer unplanned stops. For manufacturers requiring reproducible results, this combination supports a stable cycle time and predictable tool life, so process planners can rely on consistent component quality and lower overall machining cost per part. Quick selection and secure clamping for efficient changeovers Designed to the ISO SNMG format, the insert features a 90° geometry, a cylindrical hole for screw fixation and a plate thickness of 6.35 mm, enabling straightforward compatibility checks with standard holders. The stamped nominal size of 19 mm and a corner radius of 1.2 mm provide a balance between edge strength and achievable surface finish. The specified 0° relief angle supports finishing cuts where dimensional accuracy and a fine external surface are priorities. Clear dimensional data simplifies holder selection and reduces set-up time on production lines. Versatile chip control and application-focused performance The double-sided chipbreaker offers effective chip segmentation for general turning operations, supporting both external and internal machining tasks. In practice, this reduces the risk of long, stringy chips and helps maintain a consistent cutting environment, improving surface finish and tool life. The insert forms part of a system—insert, suitable external holder or boring bar, shim/clamp set and fastening screw—and is best applied where a sharp edge and process security are required. For technical clarification on selecting the correct chipbreaker or matching holder, Metav Werkzeuge provides application-focused advice and compatibility checks. Contact Metav Werkzeuge for application guidance, holder recommendations and to order Tungaloy SNMG190612 AH120 inserts quoting SKU TUN6811984 Technical data Article number: 6811984 Manufacturer SKU: TUN6811984 Model series: ISO turning indexable inserts Label: SNMG190612 AH120 Tungaloy turning insert Manufacturer: Tungaloy Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Geometry angle: 90° Special features Grade: AH120 (PVD-coated carbide) Chipbreaker: double-sided Plate form: square Hole: cylindrical hole for screw fixation Typical application: external and internal turning Compatibility determined by form, relief angle, tolerance, attachment, size and thickness FAQ What materials is this insert best suited for? The SNMG190612 AH120 insert from Tungaloy is a PVD-coated carbide designed for general turning applications where a sharp cutting edge and process security are required; final selection should consider workpiece material and cutting parameters. How does the double-sided chipbreaker affect machining? The double-sided chipbreaker on the SNMG190612 AH120 promotes controlled chip formation, improving surface finish and reducing chip-related interruptions during turning operations. Can the insert be used in standard ISO SNMG holders? Yes, the SNMG190612 designation corresponds to ISO geometry; compatibility with a holder depends on form, relief angle, tolerance class, attachment style, size and thickness—check these dimensions against the chosen holder. What does the corner radius of 1.2 mm influence? A corner radius of 1.2 mm increases edge strength and helps achieve a robust cutting profile, which is beneficial for improving tool life and reducing chipping on interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide for extended tool life, a 1.2 mm corner radius for a precise cutting line and ISO compatibility for straightforward holder integration; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SNMG190612 AH120 indexable turning insert by Tungaloy — PVD-coated carbide, square 19 mm The SNMG190612 AH120 is an ISO-standard square indexable insert for external and internal turning, designed to deliver a sharp cutting edge and stable chip control in a wide range of industrial turning operations. PVD-coated carbide for wear resistance Sharp cutting edge with 1.2 mm corner radius Double-sided chipbreaker for stable chip control ISO-standard square insert, 19 mm inscribed circle Consistent cutting performance through advanced coating and substrate The insert combines a PVD coating with a robust carbide substrate to provide reliable wear resistance and preserve a keen cutting edge under continuous use. This surface treatment reduces abrasive wear and helps to maintain dimensional accuracy for longer tool life, which in turn minimises downtime. Designed as an ISO-standard insert, the component supports predictable replacement cycles and simplifies inventory management in production environments. The result is a measurable improvement in process stability and reproducible part quality. Geometry engineered for secure clamping and chip control A 1.2 mm corner radius and a dedicated double-sided chipbreaker deliver controlled chip formation and improved surface finish during both light and interrupted cuts. The square format with a cylindrical hole ensures secure seating and straightforward orientation in compatible tool holders, while the 0° clearance angle supports applications where reduced radial relief benefits workpiece integrity. These geometric details translate into fewer edge failures and a reliable cutting action that protects the workpiece and holder interface. ISO compatibility for easy workshop integration Built to the ISO designation SNMG190612, the insert fits established clamping systems where form, clearance angle, tolerance class, fixing and thickness determine compatibility. With an inscribed circle of 19 mm and a plate thickness of 6.35 mm, the component integrates into standard turning tool assemblies and tooling stocks without complex adjustments. The insert's PVD-coated carbide composition and stable cutting-edge design make it suitable for a broad range of turning tasks where process security and repeatability are priorities. For application-specific advice or to request order information for this Tungaloy insert, contact Metav Werkzeuge and our technical advisers at info@metav-werkzeuge.com or call +49 2822 7131930 — assistance is available to ensure the correct insert selection for the machining task. Technical data Article number: 6806893 Manufacturer SKU: TUN6806893 Model series: ISO turning indexable inserts Material: Carbide Core dimensions Inscribed circle: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Angle: 90° Manufacturer article number: 6806893 Features & applications ISO designation: SNMG190612 Grade/coating: AH120 (PVD-coated) Insert shape: Square Hole: With cylindrical hole Chipbreaker: Double-sided Typical use: External and internal turning FAQ What material is the SNMG190612 AH120 intended for? The SNMG190612 AH120 insert is a PVD-coated carbide grade developed for general turning tasks where a sharp cutting edge and process security are required; specific workpiece materials should be matched with the AH120 grade based on machining conditions. How is the insert clamped in the holder? Clamping depends on holder form and tolerance; the SNMG190612 features a cylindrical hole and standard ISO geometry to allow secure seating in compatible square-indexable turning holders. Can the insert be indexed to present a new cutting edge? Yes, the SNMG190612 is double-sided and indexable, enabling rotation to a fresh edge to extend usable life and reduce tooling costs. Which dimensions define compatibility with tool holders? Compatibility is determined by the ISO designation SNMG190612, the 19 mm inscribed circle, 6.35 mm thickness and the 0° clearance angle; these values should be confirmed against the holder specification. Is the AH120 coating suitable for interrupted cuts? The AH120 PVD-coated grade is designed for wear and breakage resistance, making it appropriate for applications where a robust cutting edge and process reliability are required, including many interrupted cutting scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 AH120 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH120 carbide for reliable wear resistance and a consistently sharp cutting edge, combined with the ISO SNMG190612 format for straightforward integration into ISO-compatible turning systems; order via Metav Werkzeuge or consult the technical advisors for suitability and availability. SNMG 190612 AH120 Tungaloy — Turning insert, PVD-coated carbide The SNMG190612 is an ISO-standard turning insert for external and internal turning, engineered to deliver process security and a durable, sharp cutting edge in general turning applications. PVD-coated AH120 carbide grade ISO SNMG190612 square format Double-sided insert with cylindrical hole 1.2 mm corner radius and 0° relief angle Industrial wear resistance with AH120 PVD coating The AH120 grade combines a PVD surface layer with a carbide substrate to provide enhanced wear resistance and improved resistance to chipping under intermittent cutting conditions. The coating reduces flank wear and helps maintain a sharp cutting edge over longer cycles, which translates into more consistent part dimensions and surface quality. For production environments where repeatability and reduced tool changes are priorities, this type of coating supports longer uninterrupted runs and predictable tool-life behaviour. ISO compatibility for quick, reliable tool changes Manufactured to the ISO SNMG190612 specification, the insert is designed for compatibility with ISO holders when form, relief angle, tolerance class, fastening, size and thickness match. The standardised footprint and the 6.35 mm plate thickness simplify insert replacement and inventory management across machine tools. A complete working system typically comprises the ISO insert, a matching external holder or boring bar, a shim or clamp set and replacement screws—this modular approach reduces setup time and lowers the risk of assembly errors that can compromise process security. Geometry tuned for stable cutting performance A 1.2 mm corner radius reinforces the cutting edge to withstand higher radial loads while still permitting good surface finish on interrupted and continuous cuts. The square plate with a 90° included angle and double-sided configuration provides two usable edges per side and a cost-efficient edge economy. The cylindrical hole enables secure clamping and precise seating in the pocket. The specified 0° relief angle aids in predictable contact geometry between insert and workpiece for many turning strategies, balancing edge strength and accessibility for internal and external operations. Selecting the right chipbreaker and application fit Chipbreaker choice and the matching grade should be selected according to workpiece material, machining type and setup stability; the AH120 grade is particularly suitable where a sharp edge and process security are both required. Typical system assembly and considerations include ensuring correct holder geometry and clamping torque, matching the chipbreaker to feed and depth of cut, and monitoring wear across repeated cycles. For workshop planners seeking a versatile turning solution, the insert offers a robust baseline that can be adapted through holder selection and cutting parameters. For reliable, PVD-coated turning performance from Tungaloy’s AH120 grade, contact Metav Werkzeuge for technical advice and current availability — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6806891 Manufacturer article number: 6806891 SKU: 6806891-Tungaloy Manufacturer SKU: TUN6806891 Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Corner radius: 1.2 mm Plate thickness: 6.35 mm Inscribed circle / size: 19 mm Relief angle: 0° Included angle: 90° Special features Material: carbide Coating: PVD Grade: AH120 (wear- and chipping-resistant) Double-sided chipbreaker Cylindrical hole for secure clamping Square plate form With hole Compatible with ISO holders; compatibility determined by form, relief angle, tolerance class, fastening, size and thickness Suitable for external and internal turning Typical system: ISO insert, holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert intended for? The AH120 grade PVD-coated carbide insert is intended for general turning where a sharp cutting edge and process security are required; selection of chipbreaker and parameters should follow the workpiece material and machining strategy. How does the 1.2 mm corner radius affect cutting? A 1.2 mm corner radius increases edge strength and improves resistance to chipping while still allowing a good surface finish; it is a compromise between robustness and finishing capability for many turning tasks. Is the SNMG190612 compatible with standard ISO tool holders? Yes, the SNMG190612 follows the ISO format, but compatibility depends on matching form, relief angle, tolerance class, fastening method, size and thickness to the holder pocket. What is the purpose of the cylindrical hole in the insert? The cylindrical hole provides precise seating and reliable clamping in the pocket, ensuring repeatable positioning and stable cutting conditions during turning operations. How many cutting edges are usable on this insert? The square, double-sided design provides multiple usable edges; the double-sided chipbreaker allows rotation to fresh edges, improving edge economy and reducing tooling costs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH120 for extended edge life, the double-sided chipbreaker for consistent chip control and the ISO‑standard form for simple holder interchangeability; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SNMG 190612 AH120 indexable turning insert — Tungaloy, PVD‑coated carbide, 1.2 mm nose radius The SNMG190612 AH120 is an ISO‑standard indexable turning insert designed for external and internal turning, providing a wear‑resistant PVD‑coated carbide grade that balances a sharp cutting edge with high process reliability. PVD-coated carbide AH120 for wear resistance Double-sided chipbreaker for versatile turning 1.2 mm corner radius for smooth profiles 0° clearance for stable cutting action ISO SNMG190612 with central cylindrical hole Improved cutting performance through PVD-coated carbide The PVD‑coated AH120 carbide grade delivers a measurable improvement in edge life and wear resistance under interrupted and continuous turning conditions. By combining a hard, thin coating with a robust substrate, the insert reduces flank wear and helps maintain a sharp cutting edge for longer runs. This translates directly into fewer indexings and longer tool cycles, supporting higher uptime and a more predictable production rhythm. The coating also improves resistance to built‑up edge and adhesive wear, contributing to consistent component quality when machining a variety of steels and common workpiece materials. Reliable chip control and application flexibility A double-sided chipbreaker provides effective chip control for both finishing and semi‑finishing passes, helping to direct and break chips reliably across different depths of cut. The chipformer geometry is suitable for a range of turning tasks, allowing stable chip evacuation and reduced risk of entanglement. As a result, productivity is increased through fewer interruptions and safer swarf management, while surface integrity is preserved. This geometry suits conventional and light interrupted turning in workshops where process stability and reproducible results are required. Precision geometry for accurate, repeatable results Built to ISO dimensions, the insert features the SNMG form with a 19 mm inscribed circle and a plate thickness of 6.35 mm, giving a solid clamping interface and good stiffness in the toolholder. The 1.2 mm corner radius supports smooth profiles and helps avoid premature edge chipping on small radii, while the 0° clearance angle contributes to positive cutting forces and stable contact with the workpiece. The central cylindrical hole assures secure fastening and repeatable seating in compatible holders. These geometric details reduce vibration sensitivity and simplify process parameter setting for reproducible machining. Practical system benefits and selection guidance As part of an ISO indexable insert system, the plate works together with the appropriate holder, base, clamping set and replacement screws; compatibility depends on shape, clearance angle, tolerance class, fastening method, size and thickness. Choosing the right chipbreaker and grade for the workpiece material ensures the best compromise between surface finish and tool life. The indexable design supports fast plate changes and economical use of the cutting edges, which lowers tooling cost per component and shortens setup time. For uncertain applications, specify the intended workpiece material and operation type to receive a matched recommendation. For secure, high‑performance turning with Tungaloy PVD carbide technology, contact Metav Werkzeuge for ordering or consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6811985 Manufacturer SKU: TUN6811985 Dealer SKU: 6811985-Tungaloy Model series: ISO indexable turning inserts Material: carbide Core specifications ISO designation: SNMG190612 Size (inscribed circle): 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Plate form angle: 90° Special features Grade/coating: AH120, PVD‑coated carbide Chipbreaker: double‑sided Shape: square (quadrilateral) Hole: central cylindrical hole (with hole) Typical application: external and internal turning Compatibility: determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The SNMG190612 AH120 insert is a PVD‑coated carbide grade designed for general turning tasks; the AH120 grade emphasises wear and fracture resistance for common steels and mixed applications. Can the insert be used for internal turning? Yes, the ISO SNMG190612 form and double‑sided chipbreaker make the insert suitable for both external and internal turning when paired with an appropriate holder. How does the 1.2 mm radius affect finishing? A 1.2 mm corner radius provides a balance between edge strength and finish quality, producing smoother profiles while reducing the risk of edge chipping on small radii. Is the insert compatible with standard SNMG holders? The insert follows ISO SNMG dimensions; compatibility with a holder is defined by shape, clearance angle, tolerance class, fastening and thickness, so standard SNMG holders are generally compatible. How many indexable edges are available on this plate? Being double‑sided, the plate offers multiple usable edges before replacement, extending usable life and reducing tooling cost per part. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 AH6225 Wendeplatten - Tungaloy
Benefit from a PVD-coated carbide AH6225 grade and a 1.2 mm corner radius for reliable mid-range turning of stainless steels; the ISO form and 6.35 mm thickness ensure secure clamping and consistent performance. Order via Metav Werkzeuge or consult our specialists for application advice. SNMG190612 AH6225 Tungaloy turning insert (ISO 190612) for turning, 90° The SNMG190612 AH6225 Tungaloy is an ISO-standard indexable turning insert engineered for external and internal turning operations, offering a sharp yet stable cutting edge for variable conditions. ISO 190612 form, 90° seating PVD-coated carbide AH6225 Double-sided chipbreaker Cylindrical hole for secure clamping Consistent mid-range cutting performance with PVD-coated carbide The insert delivers a balanced combination of sharpness and edge stability thanks to the AH6225 grade and its PVD coating, designed specifically for mid-range turning of stainless steels. This composition reduces flank wear and maintains a reliable cutting edge under variable cutting parameters, allowing longer uninterrupted runs. The result is predictable tool life and improved part quality, especially when machining materials that tend to work-harden or produce challenging chips. The focus on material science ensures efficient metal removal without sacrificing surface finish. Secure fit and ISO compatibility for flexible tool setups Compatibility with toolholders depends on form, clearance angle and dimensions; the ISO designation and square geometry make this insert readily combinable with standard holders. Key design characteristics include a 6.35 mm plate thickness, 19 mm size and a cylindrical hole that supports positive clamping forces and repeatable locating. The 0° clearance angle and 90° insert angle yield predictable tool positioning, while the square shape enables indexing for multiple edges. These mechanical attributes simplify setup and reduce the risk of clamping-related vibration or misalignment. Operational advantages that support productivity and process reliability A double-sided chipbreaker helps control chip shape and evacuation, contributing to stable cutting conditions and fewer interruptions for chip management. The combination of the carbide substrate and PVD layer promotes consistent cutting-edge integrity across varied workpiece stability and cutting depths. For production environments, this translates to reduced machine downtime and a favourable cost-to-performance ratio in medium-duty turning tasks. Selecting the appropriate chipbreaker and insert grade for the specific material and workholding setup optimises cycle times and surface quality. Practical guidance for selection and application Choose the appropriate chipbreaker and insert geometry according to workpiece material, rigidity of the setup and the intended feed range; the insert is well suited for external and internal turning where a balance between edge sharpness and robustness is required. When machining stainless steels, favour climbing cuts and controlled feeds to avoid work hardening; adjust cutting speeds to the grade’s recommendations and monitor tool wear to maximise component consistency. If additional technical parameters or process recommendations are needed, Metav Werkzeuge provides expert support and can supply the matching holders, clamping kits and replacement screws for a complete system. Contact Metav Werkzeuge for tailored application advice or to order referencing SKU 6903197-Tungaloy — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 6903197 Manufacturer SKU: TUN6903197 Manufacturer: Tungaloy ISO designation: SNMG190612 AH6225 Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Insert angle: 90° Double-sided chipbreaker Special features PVD-coated carbide grade AH6225 Suitable for stainless steels Square insert form Cylindrical hole for clamping ISO indexable turning insert series Application: Turning (external and internal) FAQ Is this insert suitable for stainless steels? Yes. The SNMG190612 AH6225 Tungaloy insert uses a PVD-coated carbide grade designed for stainless steels, optimised for a sharp but stable cutting edge in medium-duty turning. Which toolholders are compatible with this insert? Compatibility is determined by ISO form, clearance angle, tolerance class, clamping method, size and thickness; the ISO 190612 designation ensures compatibility with standard holders matching that form. What are the key dimensions to check when mounting the insert? Important dimensions include the 19 mm insert size, 6.35 mm thickness, 1.2 mm corner radius and the 90° insert angle; the cylindrical hole must match the holder’s clamping system. Does the insert have a chipbreaker and what benefit does it provide? Yes. The double-sided chipbreaker controls chip form and evacuation, improving process stability and reducing interruptions for chip handling during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 AH6225 Wendeplatten - Tungaloy
Benefit from a sharp yet stable cutting edge and a PVD‑coated carbide grade tailored for stainless steel turning; the double‑sided chipbreaker and robust 6.35 mm plate thickness support consistent chip control and secure clamping in medium machining. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. SNMG 190612 AH6225 Tungaloy indexable turning insert — PVD‑coated carbide, 90° The SNMG190612 AH6225 Tungaloy insert is an ISO‑standard indexable insert designed for general turning, optimised for rostfreier Stahl and mixed‑condition machining. SNMG190612 geometry for general turning PVD‑coated AH6225 carbide for stainless steel Double‑sided chipbreaker for stable chip control Square 19 mm, 6.35 mm thick, 1.2 mm radius Consistent performance for rostfreier Stahl turning The AH6225 grade is a PVD‑coated carbide engineered as a universal solution for stainless steel machining. Its formulation balances a sharp cutting edge with edge stability under fluctuating cut conditions, reducing built‑up edge and promoting a consistent surface finish. For medium cutting depths and variable feeds, this combination lowers the risk of premature flank wear and supports longer intervals between indexings, which in turn reduces downtime and tool handling. Secure clamping and geometry that reduces vibration The insert’s square form and 6.35 mm plate thickness provide the rigidity required for stable turning operations; the cylindrical hole ensures positive seating and repeatable clamping when paired with the correct holder and clamping set. The specified 0° clearance and 90° included angle give predictable engagement geometry that helps maintain dimensional accuracy and reduce chatter in many lathe setups. The double‑sided chipbreaker supplies dependable chip control across a range of feeds, improving cycle reliability. Economical indexing and system compatibility As an ISO‑standard indexable plate, the SNMG190612 fits into common clamping systems provided the holder matches in form, tolerance class, fastening style, size and thickness. The 1.2 mm corner radius delivers a robust edge suited to moderate turning, offering a good compromise between edge strength and achievable surface quality. Selecting the correct chipbreaker and following the grade’s intended use for rostfreier Stahl will maximise tool life and reduce total machining cost per part; consult the insert’s system requirements when planning holder and screw choices. For stock availability and tailored technical advice on the Tungaloy SNMG190612 AH6225 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application‑specific guidance. Technical Data Article number: 6903200 SKU: 6903200-Tungaloy Manufacturer SKU: TUN6903200 Model series: ISO‑Drehwendeschneidplatten Material: carbide Grade/coating: AH6225 (PVD) Application: turning Facts Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 19 mm Included angle: 90° Clearance angle: 0° Hole: with hole Hole style: cylindrical Special features Square plate form Double‑sided chipbreaker ISO‑standard geometry Designed for rostfreier Stahl (stainless steel) PVD‑coated carbide for medium machining Compatible with matching external holders and clamping sets FAQ Which materials is this insert optimised for? The AH6225 grade of the SNMG190612 insert is optimised for rostfreier Stahl (stainless steel); selection of chipbreaker and machining parameters determines suitability for other alloys. How is compatibility with a holder determined? Compatibility depends on the insert’s shape, clearance angle, tolerance class, fastening type, size and thickness; the SNMG190612 must be matched to a holder designed for ISO‑standard square inserts. How is the insert mounted and clamped? The plate uses a cylindrical centre hole and is secured with the appropriate clamping set and screw in a matching external holder or toolpost system. Does the grade provide reliable edge life under varying conditions? The PVD‑coated AH6225 grade is formulated to provide a sharp yet stable edge in medium machining and changing conditions, offering dependable performance and reduced risk of edge chipping. Can the insert be indexed for multiple cutting positions? The square, double‑sided design allows economical indexing within compatible holders; the exact number of usable positions depends on the holder and mounting method. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 190612 AH6235 Wendeplatten - Tungaloy
Take advantage of a tough, PVD-coated carbide grade and a robust 90° square geometry to maintain process stability and reduce tool change frequency; order directly via Metav Werkzeuge or contact our consultants for application support. SNMG 190612 AH6235 indexable turning insert by Tungaloy — PVD-coated carbide, 90° square geometry SNMG 190612 AH6235 is an ISO-standard indexable turning insert designed for external and internal turning, optimised for rostfreier Stahl and interrupted cutting conditions. PVD-coated AH6235 grade Designed for rostfreier Stahl and interrupted cuts Square SNMG form with 90° approach angle Double-sided chipbreaker, cylindrical hole Engineered for secure cutting in demanding turning operations The PVD-coated AH6235 carbide composition provides a tougher substrate tailored for machining rostfreier Stahl and for operations with elevated risk of insert breakout. This formulation produces more stable cutting edges under shock loading and interrupted cuts, which translates to fewer edge failures and longer cumulative cutting time. Compatibility with a compatible holder depends on insert form, 0° relief angle, tolerance class, clamping method, size and thickness, so selecting the correct clamping kit and shim is essential for achieving the promised stability. Predictable productivity through robust geometry and coating A square insert with a 90° approach angle and a 1.2 mm corner radius offers a balance between strength and versatility, suitable for shoulder turning and general profiling where a sturdy edge is required. The double-sided chipbreaker design and the insert’s cylindrical hole enable secure clamping and multiple index positions, extending practical service life and lowering per-edge cost. The PVD coating reduces flank wear and helps maintain consistent surface finish, supporting higher uptime and improved batch-to-batch repeatability. Practical selection and workshop integration guidance Choose chipbreaker style and grade based on workpiece material, machining type and machine/tooling rigidity; the tougher AH6235 grade is recommended for rostfreier Stahl and unstable cutting conditions. The full system comprises an ISO insert, a matching external holder or boring bar, a support shim/clamping set and replacement screws — keeping spare fastening hardware in stock simplifies maintenance. For quieter, more efficient runs, pair the insert with a holder that matches the SNMG form, 19 mm nominal plate size and 6.35 mm thickness to ensure correct clamping and repeatable process security. For procurement or technical advice on the Tungaloy SNMG 190612 AH6235 indexable turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application-focused support. Technical Data Article number: 6903394 SKU: 6903394-Tungaloy Manufacturer SKU: TUN6903394 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Coating / grade: PVD, AH6235 Facts Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 19 mm Approach angle: 90° Relief angle: 0° Application: Drehen Special features Insert form: square (SNMG) Hole: with hole, cylindrical hole Chipbreaker: double-sided Schneidstofftyp: PVD-beschichtetes Hartmetall Typical system components: insert, external holder/boring bar, shim/clamping set, replacement screws FAQ What materials is this insert best suited for? The AH6235 grade is formulated for cutting rostfreier Stahl and performs well in conditions with interrupted cuts; the SNMG 190612 geometry supports robust engagement. What is the corner radius and why does it matter? The insert has a 1.2 mm corner radius, which provides enhanced edge strength for shoulder turns and heavier feeds while maintaining acceptable surface finish levels for many turning tasks. Is this an indexable, double-sided insert? Yes — the SNMG 190612 insert features a double-sided chipbreaker and a cylindrical hole for secure clamping and multiple index positions to extend usable life. How does the PVD coating affect tool life? The PVD coating on the AH6235 carbide improves wear resistance and reduces flank wear, helping to preserve cutting-edge geometry and deliver consistent results across production batches. What factors determine holder compatibility? Compatibility is governed by insert form, relief angle, tolerance class, clamping method, size and thickness; ensure the external holder or boring bar matches the SNMG form and the 6.35 mm thickness for correct fitment. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8005 carbide, ISO-compliant geometry and a 1.2 mm corner radius for stable, repeatable turning of heat-resistant and hard materials; order directly via Metav Werkzeuge or consult our team for selection and compatibility advice. SNMG 190612 AH8005 — Tungaloy indexable turning insert for heavy-duty turning SNMG190612 AH8005 is an ISO-format, square indexable insert designed for turning applications on demanding alloys and hard materials, offering a wear-resistant PVD coating and a double-sided chipbreaker for stable machining. PVD-coated carbide AH8005 ISO 190612 square format 1.2 mm corner radius for strength Double-sided chipbreaker for versatility Longer edge life for demanding materials The PVD-coated grade AH8005 is formulated to resist abrasive wear and reduce adhesion when machining heat-resistant alloys and other hard materials. This coating method deposits a thin, hard layer that improves surface endurance without compromising toughness. As a result, the cutting edge sustains service for longer periods under elevated temperatures, which translates into fewer index changes, reduced downtime and a more predictable tool life in production environments. Compatibility that reduces setup uncertainty Thanks to the ISO SNMG190612 geometry, the insert fits a wide range of standard holders and boring bars; compatibility is determined by shape, clearance angle, tolerance class, fastening method, size and thickness. The presence of a cylindrical centre hole supports secure clamping and repeatable seating in the toolholder. Specifying the correct holder and clamp set ensures consistent chip control and repeatable part quality, simplifying setup and lowering the risk of incorrect assembly. Robust geometry for reproducible results The insert’s 1.2 mm corner radius and 90° cutting face provide a combination of strength and form accuracy. A larger corner radius increases resistance to chipping in interrupted cuts and when cutting harder alloys, while the square form allows four cutting edges per index when used double-sided. This geometry supports stable cutting forces and predictable tool behaviour, which benefits surface finish and dimensional repeatability on turned components. Practical productivity through chip control and grade choice The double-sided chipbreaker design supports flexible feed ranges and helps control chip form across a variety of operating conditions, lowering the chance of entanglement and machine stoppages. When paired with the AH8005 grade, the insert is suited to stable setups and medium-to-high cutting speeds, balancing wear resistance with edge strength to maintain productivity in serial production or demanding single-part runs. Contact Metav Werkzeuge for tailored toolholder matching, ordering and application support for this Tungaloy AH8005 indexable insert; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical details Article number: 6741683 SKU: 6741683-Tungaloy Manufacturer SKU: TUN6741683 Data Model series: ISO turning indexable inserts Designation: SNMG190612 Size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Included hole: with hole Special features Material: carbide Coating: PVD Grade/sort: AH8005 Plate shape: square Hole style: cylindrical hole Chipbreaker: double-sided Application: turning FAQ What materials is this insert suited for? The SNMG190612 AH8005 insert is intended for heat-resistant alloys and hard materials; the PVD-coated carbide grade AH8005 improves wear resistance and performance in stable machining conditions. How many edges are available per insert? With a square, double-sided design the insert provides multiple usable cutting edges; indexing extends usable life before replacement is required. Which holder features are required for compatibility? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; ensure the holder matches the SNMG190612 ISO geometry and uses the appropriate clamp set and screw. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated AH8015 grade and a 1.2 mm corner radius for balanced wear resistance and edge stability in demanding turning operations; the ISO SNMG form and double‑sided chipbreaker reduce inventory and increase productivity. Order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility. SNMG190612 AH8015 Tungaloy indexable insert for turning (ISO SNMG 190612) The SNMG190612 AH8015 is an ISO‑standard square indexable insert designed for general turning, offering a PVD‑coated carbide grade optimised for heat‑resistant alloys. ISO‑standard SNMG form for holder compatibility PVD‑coated carbide grade AH8015 for heat alloys Double‑sided chipbreaker for stable chip control 1.2 mm corner radius for flexible finishing and roughing Consistent cutting performance with PVD‑coated AH8015 The SNMG series plate combines a PVD‑coated surface with a carbide substrate to deliver a stable cutting edge and extended tool life when machining heat‑resistant alloys. The AH8015 grade offers a deliberately balanced compromise between wear resistance and edge stability, which supports steady cycle times and predictable tool changes. The double‑sided chipbreaker promotes reliable chip formation across a range of feeds, reducing the risk of rework and facilitating automated operations. In practical terms, this means fewer interruptions for tool changes and a more consistent surface finish on turned components. ISO compatibility and straightforward mounting for efficient setups As an ISO‑design insert, the SNMG190612 ensures broad compatibility with standard external and internal turning holders: form, clearance angle, tolerance class, fastening type, size and thickness determine fit. The plate is square, 19 mm across, with a 6.35 mm thickness and a cylindrical mounting hole, enabling straightforward clamping in most ISO‑compatible holders. The specified 0° clearance angle and 90° geometry make the insert well suited to shoulder turning and general profiling tasks. These standardised dimensions simplify toolroom logistics and reduce the variety of holders and spares required on the shop floor. Productivity and economy from design choices and geometry The 1.2 mm corner radius provides a versatile compromise between strength for light roughing and the ability to achieve good finish quality, while the insert’s double‑sided design permits economical use of each cutting edge. The combination of a robust carbide substrate and a thin, durable PVD layer maintains edge integrity under interrupted cuts and variable cutting conditions. For manufacturers working with demanding alloys, the geometry and coating choice of this SNMG plate support higher productive feed rates and longer intervals between indexing, contributing directly to lower cycle costs and improved process reliability. For machining heat‑resistant alloys, select the AH8015 PVD‑coated SNMG190612 from Tungaloy — order via Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com / +49 2822 7131930 for holder compatibility guidance Technical data Article number: 6741684 Manufacturer SKU: TUN6741684 SKU: 6741684-Tungaloy Model series: ISO‑Drehwendeschneidplatten Article name: SNMG190612 AH8015 Tungaloy‑Wendeplatte Facts Corner radius: 1.2 mm Plate size: 19 mm Plate thickness: 6.35 mm Geometry angle: 90° Clearance angle: 0° Mounting hole: with hole (cylindrical) Special features Material: Carbide Coating / grade: AH8015 (PVD‑coated) Chipbreaker: Double‑sided Plate form: Square Application: Turning (outer and inner turning) ISO designation: SNMG190612 FAQ What materials is this insert suitable for? The SNMG190612 AH8015 insert is designed primarily for the general machining of heat‑resistant alloys, with the AH8015 grade offering a balance of wear resistance and edge stability for this material group. Can the insert be used on both external and internal turning operations? Yes, the ISO SNMG form and the square geometry make the insert suitable for both external and internal turning tasks when paired with the appropriate holder. How does the double‑sided chipbreaker benefit production? The double‑sided chipbreaker provides consistent chip control, extends edge life through balanced cutting conditions and halves per‑edge consumable cost by offering two usable cutting sides. What are the key dimensions to check for holder compatibility? Verify the ISO form (SNMG), 19 mm plate size, 6.35 mm thickness, cylindrical mounting hole and the tolerance class of the intended holder to ensure correct fit and secure clamping. Is the AH8015 grade PVD coating suitable for interrupted cutting? The PVD‑coated AH8015 grade is formulated to maintain edge stability under varying conditions, making it suitable for many interrupted‑cut applications typical in turning heat‑resistant alloys. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 190612 KS20 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, stable cutting-edge performance and ISO compatibility for reliable turning operations; order the SNMG190612 KS20 indexable insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG 190612 KS20 Tungaloy indexable turning insert – ISO SNMG190612, 90° square, 1.2 mm radius SNMG 190612 KS20 Tungaloy indexable turning insert designed for ISO-compliant external and internal turning applications with a focus on edge stability and consistent chip control ISO‑compliant SNMG geometry for universal holders KS20 grade for wear resistance and edge stability Double‑sided chipbreaker for controlled chips Square insert, 19 mm size and 6.35 mm thickness Consistent cutting performance that extends tool life The KS20 grade, provided by Tungaloy, is a carbide composition optimised to balance wear resistance and toughness, which translates into longer intervals between indexings and fewer unplanned tool changes. Thanks to the carbide substrate and the geometrical design, the ISO SNMG190612 form maintains cutting‑edge integrity under intermittent loads and variable cutting conditions, delivering predictable surface quality and reduced scrap rates. The result is improved throughput and lower process variability in turning cycles. Geometry engineered for reliable chip control and stable feeds The combination of a double-sided chipbreaker and a 0° relief angle promotes consistent chip control, particularly in routine external and internal turning tasks. Controlled chip formation reduces the risk of built-up edge and finished-surface defects while supporting steady feed rates. The central cylindrical hole and standard mounting features ensure secure clamping in compatible holders, which helps maintain axial and radial stability during machining and reduces the likelihood of chatter-related rejects. Standardised dimensions for quick changeovers and inventory simplicity Designed as a square insert with a nominal 19 mm side and a plate thickness of 6.35 mm, the geometry allows straightforward replacement in ISO‑compatible toolholders. The 1.2 mm nose radius and the 90° form provide a predictable contact geometry that supports consistent part tolerances and simplifies toolpath planning. Using standardised inserts minimises setup time, simplifies stock management and enables rapid recovery after tool changes, contributing to more efficient shop‑floor logistics. Practical guidance for selection and typical use cases Intended primarily for turning, the insert suits a broad spectrum of conventional turning tasks; the cutting performance depends on the matched chipbreaker and the chosen grade relative to workpiece conditions. For best results, pair the insert with a holder that matches form, clearance, tolerance and fastening requirements and select cutting data that reflect the material and stability of the setup. For any uncertainty regarding the correct chipbreaker or machining parameters, technical consultation is available to align grade and geometry with the production goal. For reliable turning performance with Tungaloy's KS20 grade, contact Metav Werkzeuge for tailored advice and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6806892 Manufacturer SKU: TUN6806892 SKU: 6806892-Tungaloy Designation: SNMG190612 KS20 Tungaloy-Wendeplatte Dimensions & numbers Insert size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Insert angle: 90° Special features Grade: KS20 Material: Hartmetall Form: square insert Chipbreaker: double-sided Hole: with cylindrical hole Series: ISO‑Drehwendeschneidplatten Intended application: Drehen FAQ What is the corner radius of the insert? The SNMG190612 KS20 insert is specified with a 1.2 mm corner radius for consistent profile control. Which grade and material are used for this insert? This indexable insert uses the KS20 Tungaloy grade on a carbide substrate to combine wear resistance and edge stability. Is the insert compatible with standard ISO holders? Yes, the SNMG190612 geometry is ISO‑compliant; compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness. What chip control can be expected from this geometry? The double‑sided chipbreaker provides reliable chip control in both external and internal turning, supporting stable feeds and reduced built‑up edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 T5115 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T5115 grade and the robust carbide substrate to secure longer tool life and consistent chip control during cast-iron turning; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and optimisation. SNMG 190612 T5115 — Turning insert by Tungaloy, CVD-coated carbide SNMG 190612 T5115 is an ISO-conforming indexable turning insert for external and internal turning applications, optimised for machining cast iron with balanced wear resistance and edge stability Universal grade T5115 for cast iron applications ISO indexable geometry for standard holders Square 19 mm form with 1.2 mm corner radius Double-sided chipbreaker for economical use Consistent wear resistance for productive cast-iron turning The CVD-coated T5115 grade combines a wear-resistant coating with a tough carbide substrate to maintain cutting-edge stability under intermittent and continuous cuts. This balance reduces flank wear and helps preserve surface finish over longer tool life, which in turn lowers tool-change frequency and supports uninterrupted production cycles. With a focus on measurable performance, the result is a predictable process window and improved component repeatability. Easy specification and secure clamping in ISO systems Designed as part of the ISO indexable turning insert family, compatibility is defined by geometry, relief angle, tolerance class, fastening method, overall size and thickness. The insert features a square 19 mm form, 6.35 mm thickness and a 1.2 mm corner radius, together delivering stiffness for heavier cuts and stable support in the pocket. The cylindrical hole provides positive seating and reliable clamping when used with an appropriately matched holder and clamping set. Chip control and operational economy The double-sided chipbreaker profile enables reuse of both cutting edges, lowering per-edge cost and reducing inventory needs. The neutral relief (0°) and the 90° included angle make the insert versatile for both external and internal turning where a balanced cut is required. The CVD coating enhances resistance to built-up edge and abrasion; because it is a chemical vapour deposition layer, it adheres strongly to the carbide and is particularly effective when machining grey and ductile cast irons, providing a stable cutting action and consistent surface quality. Practical integration in production workflows When planning tool assemblies, choose a matching ISO holder that corresponds to the insert's form and dimensions to ensure correct seat and rake relationship. The insert’s geometry permits straightforward indexing and replacement, supporting faster set-ups and reduced downtime. For process engineers seeking predictable results, the combination of CVD-coated carbide and a defined chipbreaker design delivers a measurable improvement in tool life and machining consistency. Contact Metav Werkzeuge for tailored holder recommendations and to secure the SNMG 190612 T5115 turning insert from Tungaloy; reach Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and ordering assistance Technical data Article number: 6852999 Manufacturer SKU: TUN6852999 SKU: 6852999-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Application: Turning Material: Hartmetall Grade: T5115 ISO designation: SNMG190612 Numbers / Core specifications Plate size: 19 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Included angle: 90° Designs / Special features Plate shape: square Hole style: with hole, cylindrical hole Chipbreaker: double-sided Coating and substrate: CVD-coated carbide (T5115) Typical usage: external and internal turning Compatibility notes: determined by form, relief angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert intended for? The Tungaloy SNMG 190612 T5115 insert is developed as a universal grade for cast iron machining, offering a balance between wear resistance and edge stability for reliable finishing and roughing operations. Can the SNMG 190612 be used for both external and internal turning? Yes, the insert’s geometry and neutral relief make the SNMG 190612 suitable for both external and internal turning tasks when combined with the correct ISO holder and stable setup. How does the T5115 grade improve process reliability? T5115’s CVD-coated carbide construction enhances abrasion resistance while preserving a stable cutting edge, which reduces unexpected wear and helps maintain consistent surface quality across batches. What dimensions and features are critical when selecting a matching holder? Key parameters are the insert form (square), plate size (19 mm), thickness (6.35 mm), corner radius (1.2 mm), relief angle (0°) and the cylindrical hole; these ensure correct seating and clamping in the holder Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 T5125 Wendeplatten - Tungaloy
Reliable combination of CVD-coated carbide grade T5125 and an ISO-compatible square form yields stable chip control and extended life in interrupted cutting conditions; the double-sided chipbreaker and 1.2 mm corner radius support productive turning under variable stability. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. SNMG 190612 T5125 indexable insert for turning — Tungaloy A SNMG 190612 T5125 indexable turning insert designed for ISO-standard holders, optimised for machining cast iron and for interrupted cuts where toughness and chip control are required. CVD-coated carbide grade T5125 For cast iron and interrupted cuts ISO 190612 square, 6.35 mm thick Double-sided chipbreaker, 1.2 mm radius Productivity where interrupted cuts occur The insert delivers a clear advantage in applications with irregular chip formation thanks to the T5125 grade, a CVD-coated carbide blend that balances toughness and wear resistance. This composition reduces edge chipping during interrupted cuts and supports stable cutting under less rigid setups, which translates to fewer insert changes and higher net machining time. The double-sided chipbreaker simplifies inventory and allows two cutting edges per index, promoting economical use and consistent surface finish. For operations on cast components, the tougher substrate mitigates microfracture risks while maintaining acceptable edge life. Compatibility and secure clamping for predictable results Designed as an ISO-standard item, the insert matches holders by form, relief angle, tolerance class, clamping method, size and thickness to ensure secure seating and repeatable geometry. The combination of ISO 190612, a square outline and a 6.35 mm thickness gives robust support in the pocket, reducing vibration and enabling easier set-up. The central cylindrical hole ensures reliable clamping with standard screws or clamping kits. Clear specifications on form and angles minimise trial-and-error during tool selection and accelerate first-cut success in batch or single-piece production. Coating and substrate explained for practical decision-making The CVD-coated surface provides a dense, firmly adhered coating that enhances resistance to abrasive wear and thermal loading. Backed by a tough carbide substrate, the coating-grade pairing is intentionally selected for materials that generate discontinuous chips or where cutting forces spike intermittently. Compared with some very hard coatings that favour continuous finishing cuts, this configuration gives a compromise between wear resistance and edge strength, making it suitable for turning operations on cast iron and mixed-material batches where machining conditions can vary. Operational benefits on the shop floor Using an insert with a 1.2 mm corner radius and a dedicated chipbreaker simplifies process planning: larger radii improve tool life and support higher feed rates where component tolerances permit, while the chipbreaker shapes swarf for safer evacuation and consistent surface quality. The insert’s square geometry provides multiple indexable edges, aiding cost efficiency. Selection of the correct chipbreaker and grade for the workpiece material and machine stability remains essential; matching these parameters reduces rework and supports predictable production cycles. For set-up questions or material-specific recommendations, technical consultation is available. Contact Metav Werkzeuge for tailored machining advice and to source the Tungaloy SNMG 190612 T5125 indexable insert for reliable, efficient turning operations Technical data Article number: 6853000 SKU: 6853000-Tungaloy Manufacturer SKU: TUN6853000 Model series: ISO turning indexable inserts Facts Corner radius: 1.2 mm Thickness: 6.35 mm Plate size: 19 mm Relief angle: 0° Cutting angle: 90° Special features Material: carbide Coating / grade: T5125 (CVD-coated) Shape: square Double-sided chipbreaker Included hole: cylindrical Application: external and internal turning Suited to cast iron and interrupted cuts FAQ What materials is this insert best suited for? The SNMG 190612 T5125 insert from Tungaloy is intended primarily for cast iron and similar materials; the T5125 grade and CVD-coated carbide substrate are chosen to resist chipping in interrupted cuts. Can this insert be used in standard ISO holders? Yes. The insert follows the ISO 190612 form and is compatible with holders that match the shape, relief angle, thickness and clamping style; secure seating is achieved via the cylindrical hole and standard clamping hardware. How many cutting edges are available per insert? This square, double-sided insert provides multiple indexable edges; each side can be rotated to present a fresh edge, improving economy and reducing downtime for replacements. What advantages does the T5125 coating provide? The T5125 coating is a CVD finish applied to a tough carbide substrate; it offers a balance of wear resistance and edge strength that is beneficial when machining cast iron and when facing interrupted or unstable cutting conditions. Is the SNMG 190612 suitable for internal turning as well as external turning? Yes, the geometry and thickness make the insert appropriate for both external and internal turning operations, provided the correct holder and machining parameters are selected to ensure rigidity and chip evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 T515 Wendeplatten - Tungaloy
Take advantage of the combination of economical cutting performance, reliable chip control and ISO compatibility for a consistent turning process; order the SNMG190612 T515 indexable inserts via Metav Werkzeuge or consult the team for application-specific advice. SNMG 190612 T515 Turning Insert (CVD-coated carbide, 90°) — Tungaloy The SNMG190612 T515 is an ISO-standard indexable turning insert designed for efficient external and internal turning of cast iron components. CVD-coated cemented carbide grade T515 Economical solution for cast iron machining Double-sided chipbreaker for versatile use 1.2 mm nose radius for reliable edge strength ISO SNMG190612 with 90° geometry and hole High-performance grade for economic cast iron machining The combination of a CVD-coated surface and a cemented carbide substrate, specified as the T515 grade, provides a balance of wear resistance and toughness that supports high material removal rates in cast iron applications. This configuration is optimised for stable chip formation and predictable tool life, which translates into lower tooling costs per part and fewer interruptions during production. The coating reduces flank wear and helps maintain a consistent cutting edge, so cycle times remain stable across batch runs. Simple integration into existing ISO tool systems The insert follows the ISO SNMG190612 format, ensuring straightforward compatibility with common external holders and boring bars. Compatibility is determined by geometry, relief angle, tolerance class, fastening and plate thickness, and this insert meets the ISO criteria for those parameters. Using standardised inserts reduces inventory complexity and simplifies holder selection, allowing machines to be retooled quickly and with minimal setup time. The standardised form factor supports predictable process implementation in mixed-production environments. Enhanced edge strength and chip control for robust cutting With a 1.2 mm nose radius and a double-sided chipbreaker, the insert delivers durable edge strength and effective chip control across a range of feeds and depths. The modest nose radius helps resist chipping during interrupted cuts while still permitting acceptable surface finish when light finishing passes are required. The 90° included angle concentrates cutting forces into stable contact, further supporting dimensional accuracy on external turning operations. The double-sided design provides multiple cutting edges per indexable unit, extending the usable life before disposal. Practical system benefits and process reliability The insert is supplied as part of a system that includes the insert itself, a compatible outer holder or boring bar, and the necessary clamping pads and screws for secure fixation. This systemic approach reduces installation errors and supports repeatable setups. For operations where intermittent cutting or varying workpiece stability occurs, choose the grade and chipbreaker suited to the specific cutting condition to maintain consistent performance. The overall result is improved uptime and predictable component quality, helping to meet production deadlines with confidence. Contact Metav Werkzeuge for application advice and to secure SNMG 190612 T515 inserts from stock — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6747815 SKU: 6747815-Tungaloy Manufacturer SKU: TUN6747815 Model series: ISO indexable turning inserts Facts Shape: square Size: 19 mm Thickness: 6.35 mm Nose radius: 1.2 mm Included angle: 90° Relief angle: 0° Hole: with hole (cylindrical) Special features Grade/coating: T515 (CVD-coated) Substrate: cemented carbide Chipbreaker: double-sided Typical application: turning Recommended for: cast iron machining System components: insert, outer holder/boring bar, clamping pad and screws FAQ Which materials is this insert suited for? The SNMG190612 T515 insert is optimised for cast iron; the T515 CVD-coated grade offers the chip control and wear resistance required for economical machining of grey and nodular cast irons. What are the key geometry details of the insert? This SNMG190612 insert features a 90° included angle, a 1.2 mm nose radius, a square form with 19 mm size and a plate thickness of 6.35 mm, compatible with ISO SNMG holders. Is the insert appropriate for interrupted cuts and unstable setups? Yes — the combination of a robust 1.2 mm nose radius and a double-sided chipbreaker supports interrupted cuts; choose the insert grade and holder rigidity according to the extent of interruption and workpiece stability. How many cutting edges are available per insert? The double-sided design provides multiple indexable edges; rotating to a fresh edge restores cutting performance without changing the insert body. What determines whether the insert fits a particular holder? Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and plate thickness; these ISO-aligned parameters ensure proper seating and secure clamping in matching holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of robust edge life, high-speed capability and secure clamping for consistently productive turning operations — order directly via Metav Werkzeuge or consult the technical team for compatibility advice. SNMG190612 T9205 Tungaloy indexable carbide insert for turning, CVD-coated, 90° square The SNMG190612 T9205 is an ISO-standard indexable insert engineered for productive external and internal turning of steel under stable machining conditions. CVD-coated carbide grade T9205 Designed for productive steel turning Square 90° geometry, 1.2 mm corner radius Double-sided insert with cylindrical hole Consistent productivity through high‑speed wear resistance The CVD‑coating on this carbide grade delivers improved wear resistance at elevated cutting speeds, enabling a reliable balance between productivity and tool life. As a wear‑resistant grade, T9205 supports longer tool life in stable cutting conditions, which reduces changeover frequency and contributes to a lower cost per component. The coating also enhances heat resistance, stabilising the cutting edge during extended cycles and helping to maintain consistent surface finish. Simple integration into ISO turning systems As an ISO‑norm insert, compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The system consists of the insert, a matching external holder or boring bar, an underlay/clamp set and replacement screws. Selecting the correct chipbreaker and grade according to the workpiece material and machining stability ensures efficient chip control and repeatable results, while the cylindrical centre hole gives secure clamping and accurate seating in standard toolheads. Geometry engineered for edge strength and stability The square plate with a 90° geometry and a 1.2 mm corner radius provides robust edge strength for medium to heavy turning passes. The 6.35 mm plate thickness and 19 mm size contribute to rigidity, reducing vibration and enabling stable cutting conditions. The double‑sided, reversible design effectively doubles the number of available cutting edges per insert, improving economy of use and reducing tool change intervals without compromising clamping security. Practical selection advice for machining steel For productive turning of steel under consistent, well‑supported cutting conditions this CVD‑coated grade offers a strong combination of process reliability and surface quality. The reversible chipbreaker improves span control when matched to the cut depth and feed; the insert is most effective when paired with a suitably rigid holder and correct fixture tolerance. Technical enquiries or requests for additional machining data can be directed to Metav Werkzeuge for tailored recommendations. For ordering guidance or detailed application support for Tungaloy carbide inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application‑oriented advice Technical data Article number: 6785746 Manufacturer SKU: TUN6785746 SKU: 6785746-Tungaloy Model series: ISO turning indexable inserts Material: carbide Name: SNMG190612 T9205 Tungaloy insert Core data Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 19 mm Geometry angle: 90° Clearance angle: 0° Features Grade: T9205 (CVD‑coated carbide) Chipbreaker: double‑sided Plate form: square Centre hole: cylindrical hole Typical application: external and internal turning of steel FAQ Which materials is this insert suitable for? The SNMG190612 T9205 insert is optimised for machining steel; the CVD coating and carbide substrate provide wear resistance suited to productive turning under stable conditions. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength, making the insert more tolerant of heavier cuts and reducing the risk of edge chipping during interrupted cuts. Is the insert reversible and how many cutting edges are available? The square, double‑sided design offers reversible usage, effectively providing multiple cutting edges per insert and improving economy of use. What role does the cylindrical hole play? The cylindrical centre hole ensures reliable clamping and accurate seating in ISO‑compatible holders, enhancing repeatability and reducing indexation error. Which chipbreaker should be chosen for general steel turning? Select a chipbreaker that matches the material, feed and depth of cut; the double‑sided chipbreaker on this grade supports good chip control when paired with stable cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 190612 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a 1.2 mm corner radius and ISO conformity for stable, productive turning operations; order the SNMG190612 T9215 insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG 190612 T9215 – SNMG indexable turning insert for turning (Tungaloy) The SNMG 190612 T9215 is an ISO-standard indexable insert designed for external and internal turning, offering high wear resistance and secure clamping for medium-steel machining. CVD-coated carbide for high wear resistance Optimised T9215 grade for medium steel productivity 90° square insert with 1.2 mm corner radius Double-sided chipbreaker, ISO SNMG190612 Increase throughput with CVD-coated carbide and the T9215 grade The combination of CVD-coated surface and T9215 carbide delivers a noticeable rise in tool life and consistent cutting-edge stability when machining medium-strength steel. The chemical vapour deposition layer reduces abrasive wear and enhances edge micro‑geometry, which translates into longer uninterrupted runs and fewer indexings. For production-oriented environments where continuous or slightly interrupted cuts are common, this geometry and grade pairing supports higher cutting parameters while maintaining dimensional reliability and repeatable component quality. Secure clamping and repeatable accuracy thanks to ISO conformity Compatibility with holders is governed by form, relief angle, tolerance class, fastening, size and thickness; the ISO SNMG190612 format ensures interchangeability across standard indexable-holding systems. The 90° square configuration and the cylindrical hole enable positive seating and uniform load distribution in the pocket, while the 6.35 mm plate thickness contributes rigidity under radial cutting forces. These attributes reduce chatter and improve repeatability, which benefits batch production and setups requiring consistent datum features and tolerances. Improved surface finish and fewer interventions with the chipbreaker and radius The double-sided chipbreaker combined with a 1.2 mm corner radius balances chip control and edge strength, producing a better surface finish on turned components without sacrificing robustness. The modest radius supports heavy cuts without brittle edge failure and helps dampen vibration, decreasing the need for rework and lowering machine idle time for insert changes. For operations aiming to reduce secondary finishing, this insert geometry offers an effective compromise between productivity and part quality. Practical selection and integration for workshop use The insert is intended for turning applications and is best paired with a suitable external holder or boring bar, a correctly rated clamping set and matching replacement screws. When selecting a chipbreaker and cutting data, align the choice to the specific steel grade, machining stability and desired surface requirement; the T9215 sort is recommended as a first choice for medium-steel machining where a balance of wear resistance and breakage safety is required. Technical enquiries regarding holder compatibility or process parameters are welcome to ensure optimal integration into existing tool systems. For process reliability and high productivity with Tungaloy's T9215-grade inserts, contact Metav Werkzeuge to place an order or receive tailored cutting recommendations Technical Data Article number: 6773861 Manufacturer SKU: TUN6773861 SKU: 6773861-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Facts Geometry designation: SNMG190612 Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 19 mm Relief angle: 0° Insert angle: 90° Special features Coating: CVD-coated Grade: T9215 Chipbreaker: Double-sided Hole: With cylindrical hole Plate form: Square Typical application: External and internal turning, medium steel FAQ What materials is this insert intended for? The SNMG 190612 T9215 insert is optimised for medium steel; the T9215 grade offers a balance of wear resistance and fracture safety suited to continuous and slightly interrupted turning. Is the insert compatible with standard holders? Yes, the SNMG190612 geometry follows ISO standards; compatibility depends on holder form, relief angle, tolerance class, fastening method, size and plate thickness. How does the 1.2 mm corner radius affect performance? A 1.2 mm radius improves edge strength and reduces vibration, supporting heavier cuts and producing a superior surface finish compared with finer radii. Can the insert be indexed to use both sides? The insert is double-sided and the chipbreaker is designed for use on both cutting edges, effectively doubling the usable life before disposal or regrinding. Which feature most influences tool life in this insert? The CVD-coated layer combined with the T9215 carbide grade primarily determines wear resistance and edge stability, leading to extended tool life under recommended cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 1.2 mm corner radius for consistent edge strength and the ISO-compatible SNMG form for a dependable turning process; order the insert or consult Metav Werkzeuge for application advice. SNMG 190612 T9215 turning insert by Tungaloy — ISO indexable insert for turning SNMG190612 T9215 is an ISO-indexable turning insert designed for medium-steel machining, offering robust wear resistance and good fracture toughness in continuous to slightly interrupted cuts CVD-coated carbide grade T9215 Optimised for medium steel machining Square ISO SNMG form, 90° lead Double-sided insert with cylindrical hole Increase throughput with a high-performance grade The CVD-coated carbide grade T9215 delivers a balance of wear resistance and fracture toughness, which translates into longer tool life and fewer indexings during production. For shops machining medium-strength steel, this geometry and coating combination reduces unplanned stoppages and supports higher cutting parameters without sacrificing surface quality. The square SNMG form provides four usable edges on a double-sided design, improving cost efficiency per cutting edge while maintaining stable cutting behaviour. Secure seating and dependable geometry for repeatable results A stable clamping interface ensures consistent results across batches. The insert features a cylindrical hole and standard ISO form that match common holders, with compatibility determined by insert form, relief angle, tolerance class, fixation and thickness. The 0° relief angle and 90° lead give predictable engagement for external and internal turning, while the corner radius of 1.2 mm supports robust edge strength for slightly interrupted cuts. These geometric attributes make the insert suitable for automated production where reproducibility is essential. Improved chip control and reduced process variation The double-sided chipbreaker design optimises chip formation for medium-steel applications, helping to evacuate swarf reliably and reducing the risk of recutting. Favourable chip control contributes directly to improved surface finish and lower secondary operations. Combined with the 6.35 mm plate thickness and 19 mm inscribed circle, the insert gives mechanical rigidity in less stable setups and accommodates a range of cutting depths and feeds with minimal vibration. Contact Metav Werkzeuge today for tailored application support on the Tungaloy SNMG190612 T9215 turning insert, or request further technical data by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6773878 Manufacturer SKU: TUN6773878 SKU: 6773878-Tungaloy Designation: SNMG190612 Model series: ISO indexable turning inserts Dimensions & Geometry Corner radius: 1.2 mm Thickness: 6.35 mm Inscribed circle / size: 19 mm Lead angle: 90° Relief angle: 0° Features & Applications Material: CVD-coated carbide (grade T9215) Shape: square, double-sided Hole: with cylindrical hole Suitable for: turning, medium steel, continuous to slight interruption Chipbreaker: double-sided FAQ What materials is this insert best suited for? The SNMG190612 T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade T9215 offers wear resistance and fracture toughness suited to this material class. How many cutting edges are available per insert? As a square, double-sided SNMG insert, SNMG190612 offers four usable cutting edges to extend life per insert and improve cost efficiency. Which holder types are compatible with this insert? Compatibility depends on insert form, relief angle, tolerance class, fixation, size and thickness; the SNMG190612 matches standard ISO SNMG holders with a cylindrical hole seating. Is the insert suitable for interrupted cuts? The T9215 grade and 1.2 mm corner radius provide good resistance to breakage, making the insert suitable for continuous to slightly interrupted cutting conditions. What benefits does the CVD coating provide? The CVD-coated carbide improves surface hardness and wear resistance during turning operations, leading to longer tool life and stable process windows for medium-steel applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide grade T9215 and a 1.2 mm corner radius for robust, high‑productivity medium‑steel turning; order the SNMG190612 insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG190612 T9215 Tungaloy turning insert – CVD-coated carbide, 1.2 mm radius A SNMG190612 indexable insert designed for ISO‑standard external and internal turning in medium‑steel applications, offering high wear resistance and reliable edge stability. CVD-coated carbide grade T9215 Optimised for medium steel machining 1.2 mm corner radius for durable cutting edge Double-sided chipbreaker, ISO geometry Consistent productivity from a wear‑resistant coating The combination of a CVD‑coated surface and a CVD‑based carbide matrix in grade T9215 provides a measurable increase in tool life under continuous and slightly interrupted cuts. The coating acts as a barrier against adhesive and abrasive wear, which translates into fewer tool changes and more predictable cycle times. For production environments aiming to balance throughput and component quality, this insert supports higher metal removal rates while maintaining edge integrity and repeatable performance. Geometry engineered to protect the cutting edge and improve stability A 1.2 mm corner radius and a square plate form create a stronger cutting edge that tolerates feed variations and intermittent engagement better than finer radii. The insert's ISO geometry and a 0° clearance angle contribute to stable seating in compatible holders, reducing chatter and promoting consistent surface finish. These geometric choices reduce the risk of edge chipping and mean the turning tool can be deployed in tougher workpiece setups without compromising uptime. Reliable chip control and process security for cleaner operations The double-sided chipbreaker is optimised for typical turning feeds in medium steels, offering reliable chip formation and evacuation that eases downstream handling and improves surface quality. In practice, controlled chip flow reduces load peaks on the tool and machine, supporting longer uninterrupted runs and lowering scrap risk. The insert is suitable for both external and internal turning tasks when paired with the appropriate external holder or boring bar. Simple integration into existing ISO turning systems As an ISO‑standard indexable insert, the component fits into standard system configurations: matching holder form, free angle, tolerance class, fastening method, size and thickness determines compatibility. The insert features a cylindrical hole for secure mounting and a plate thickness of 6.35 mm for robust clamping. This makes it straightforward to spec into production lines where interchangeability and predictable performance are priorities. If uncertainty remains about holder compatibility or cutting data, technical advice is available to ensure correct selection. For application‑matched selection of Tungaloy grade T9215 inserts and ordering through Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations and immediate supply. Technical data Article number: 6773872 Manufacturer SKU: TUN6773872 SKU: 6773872-Tungaloy Material: carbide Facts Designation: SNMG190612 Grade: T9215 Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 19 mm Clearance angle: 0° Included hole: cylindrical Plate form: square Included chipbreaker: double-sided Included angle: 90° Special features CVD‑coated carbide for wear resistance Intended application: turning (external and internal) ISO‑standard indexable insert series Suitable for continuous to slightly interrupted cuts Compatibility determined by holder form and tolerance FAQ What materials is this insert designed for? The Tungaloy SNMG190612 insert with T9215 grade is optimised for medium‑strength steels and offers a balance of wear resistance and fracture toughness suitable for productive turning operations. How does the corner radius affect performance? A 1.2 mm corner radius provides a tougher cutting edge that resists chipping under variable loads, improving tool life and allowing more robust feeds during turning. Is the insert reversible or single‑use? The insert is double‑sided with a chipbreaker on each cutting edge, enabling rotation to a fresh edge when required and extending usable life per insert. Which holder characteristics ensure compatibility? Compatibility requires a matching ISO form, correct free angle, tolerance class, fastening method and the appropriate seat for a 6.35 mm thick, square SNMG plate with a cylindrical hole. Can this insert handle interrupted cuts? Yes, the grade and geometry are suited to continuous and slightly interrupted cuts; for heavily interrupted operations, application‑specific verification is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com