TBGR 070901 SH725 Wendeplatten - Tungaloy
Benefit from the combination of coated carbide grade SH725, a precise 60° triangular geometry and a 0.1 mm corner radius for consistent turning performance and extended tool life; order the TBGR070901 insert directly via Metav Werkzeuge or consult the technical team for system compatibility. TBGR070901 SH725 Turning Insert (ISO 070901) — triangular 60° by Tungaloy A TBGR070901 SH725 indexable turning insert in triangular form, designed for general turning where edge stability and predictable chip control are required. Coated carbide grade SH725 for edge stability Triangular 60° form with 0.1 mm radius One-sided chipbreaker for predictable chips ISO 070901 size, 9.52 mm plate thickness High cutting reliability through a tough coated grade The SH725 grade is a coated cemented carbide developed for edge stability under variable engagement conditions. Its formulation delivers consistent wear resistance and predictable flank behaviour, which in turn reduces unplanned tool changes and stabilises cycle times. In practical terms, the coating protects the substrate during intermittent cuts and small-tool operations, helping to maintain surface quality while extending tool life—advantages that directly improve process efficiency on production lines. Geometry and standardisation that reduce set-up time The triangular geometry with a 60° included angle and a 0.1 mm corner radius provides a reliable seating and repeatable orientation within ISO-compliant clamping systems. The 9.52 mm plate thickness and the relief angle of 5° contribute to robust clamping and cutting stability. As the insert conforms to the ISO 070901 designation, interchangeability with matching holders is simplified, so machine set-up and index changes require fewer adjustments. This mechanical predictability supports stable cutting parameters and consistent part tolerances. Predictable chips and improved surface quality A one-sided chipbreaker is integrated to promote controlled chip formation in common turning tasks. By selecting the SH725 grade and the chipbreaker combination that suit the workpiece and cutting strategy, process planners can expect steady chip evacuation and reduced risk of chip-related interruptions. The result is a measurable improvement in surface finish and lower scrap rates, particularly in serial production where repeatability is critical. Match the chipbreaker and grade to the application for the best balance of productivity and finish. System-level guidance for economical operation The insert is intended for both external and internal turning applications; compatibility with a toolholder assembly depends on the insert form, relief angle, tolerance class, fastening method, size and thickness. A complete cutting system therefore consists of the ISO indexable insert, a suitable external holder or boring bar, clamping plate/support and fastening screws. Application advice is available from Metav Werkzeuge to ensure optimal holder selection and machining parameters, helping to achieve productive, cost-effective results with minimal trial runs. For tailored advice on the SH725 grade and system compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt technical support Technical information Article number: 6843047 Manufacturer SKU: TUN6843047 SKU: 6843047-Tungaloy Model series: ISO turning indexable inserts Material: cemented carbide Core data ISO code: 070901 Size: 07 Plate thickness: 9.52 mm Corner radius: 0.1 mm Included angle: 60° Relief angle: 5° Plate form: triangular Special features Grade SH725 Coated cemented carbide One-sided chipbreaker No hole Compatibility: holder form, relief angle, tolerance class, fastening, size, thickness FAQ What is the main advantage of the SH725 grade? The SH725 grade provides a tough, edge-stable performance; the TBGR070901 SH725 insert from Tungaloy is configured to cope with variable entry conditions and small-tool applications, extending tool life and stabilising cutting results. Which geometry and dimensions does the insert have? The insert is triangular with a 60° included angle, a 0.1 mm corner radius and a plate thickness of 9.52 mm; it follows the ISO 070901 designation for consistent fitment. How does compatibility with holders get determined? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the TBGR070901 adheres to ISO standards to facilitate matching with appropriately specified holders. What chip control can be expected in turning operations? The one-sided chipbreaker promotes predictable chips; pairing the chipbreaker with the SH725 grade and appropriate cutting parameters supports stable chip evacuation and improved surface finish. Is the insert suitable for both external and internal turning? Yes—this insert is intended for external and internal turning tasks; selecting the correct holder and cutting data is essential for achieving repeatable, economical machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TBGR 070902 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 toughness, ISO‑standard triangular geometry and a fine 0.2 mm corner radius for reliable, repeatable turning operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. TBGR 070902 SH725 Tungaloy indexable insert for turning (triangle, 60°, r0.2) TBGR070902 SH725 is an ISO‑standard triangular indexable insert developed for external and internal turning where tool life and edge stability are priorities. ISO‑standard triangular insert Tough SH725 coated carbide 60° geometry for versatile turning 0.2 mm corner radius for fine finishing Consistent edge performance for demanding turning The TBGR070902 combines a coated carbide substrate with the SH725 grade to deliver dependable edge stability under varying engagement conditions. The coating and substrate pairing reduces flank wear and stabilises cutting forces, which translates into longer service intervals and fewer index changes. For smaller tooling assemblies or operations with fluctuating depths of cut, the insert’s composition helps maintain surface quality while keeping overall cycle times down. Designed for smooth tool changes and secure clamping As an ISO‑standard triangular insert, the geometry and dimensions match common holders and boring bars; compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness. The 60° insert angle is a widespread choice for general turning, offering an effective balance between strength and accessibility in tight profiles. The absence of a centre hole and the single‑sided chipbreaker design simplifies mounting and reduces the number of variables during setup, supporting faster tool changes and reliable repeatability. Precise finish capability and application guidance A 0.2 mm corner radius offers a clear benefit when finishing or producing parts where tight tolerance radii are specified. The small radius minimises corner build‑up while preserving edge integrity for fine surface finishes. Typical applications include external and internal turning across a variety of materials; for optimum results, choose a chipbreaker and grade that match the workpiece material, cutting strategy and machine stability. The insert is particularly suitable where toughness and stable cutting edges are required, for example in mixed‑operation batches or interrupted cuts. Practical integration and productivity gains Using an indexable insert from a recognised series reduces inventory complexity: the model series establishes a system comprising the insert, matching external holder or boring bar, backing/clamp set and replacement screws. This system approach supports predictable tool management, reduces downtime associated with non‑compatible parts and helps maintain cycle consistency. Where process reliability and surface quality are critical, the combination of triangle geometry, SH725 grade and precise relief angles contributes to measurable productivity improvements. Contact Metav Werkzeuge today to discuss the TBGR070902 SH725 insert, request detailed cutting data or check holder compatibility — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6843039 SKU: 6843039-Tungaloy Manufacturer item no.: TUN6843039 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: carbide Facts Corner radius: 0.2 mm Insert angle: 60° Free clearance angle: 5° Plate thickness: 9.52 mm Plate size: 07 Special features Grade: SH725 Coating: coated carbide Plate shape: triangular Chipbreaker: one‑sided Hole: without hole Application: turning (external and internal) System components: insert, holder/boring bar, backing/clamp set, replacement screws FAQ What materials is the TBGR070902 suitable for? The TBGR070902 SH725 insert is intended for a broad range of turning tasks; the SH725 grade provides toughness and edge stability suitable for mixed materials when the chipbreaker and cutting data are selected to match the workpiece. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius supports finer surface finishes by reducing edge chipping and ensuring steadier contact with the workpiece, particularly useful during finishing passes. Is this insert compatible with standard ISO triangular holders? Yes, the TBGR070902 follows ISO dimensions for triangular indexable inserts; compatibility is determined by form, clearance angle, tolerance class, clamping style, size and thickness. What benefit does the SH725 grade deliver compared with general grades? The SH725 coated carbide provides enhanced toughness and stable cutting edges, which is advantageous for smaller tool assemblies or variable engagement conditions where consistent tool life is needed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TBGR 070902 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of stable cutting-edge performance, SH725 coated carbide and ISO compatibility for reliable turning cycles; order directly via Metav Werkzeuge or ask our consultants if needed. TBGR 070902 SH725 triangular ISO turning insert by Tungaloy — 60° geometry, coated carbide TBGR070902 SH725 is a triangular ISO indexable insert designed for general turning applications, offering a resilient cutting edge for small tools and varying engagement conditions Triangular ISO insert, 60° geometry Grade SH725, coated carbide 0.2 mm corner radius for fine turning Single-sided chipbreaker, no hole Consistent edge life from a tough coated carbide grade The TBGR070902 SH725 is built on a coated carbide substrate that emphasises edge stability under fluctuating cut conditions. The SH725 grade provides a balance between toughness and wear resistance, making the insert particularly suitable for situations where tool engagement varies or where smaller tool bodies are used. As an indexable insert, it delivers repeatable performance and predictable wear behaviour, reducing unplanned stoppages. Technical buyers and workshop managers will appreciate that the coated microstructure supports longer tool life without sacrificing surface finish, which helps maintain steady production rates in batch and single-piece turning. ISO form and geometry that simplify holder selection and repeatability Designed to ISO standards, the insert’s 60° triangular geometry and 0.2 mm corner radius deliver a controlled cutting edge for finishing and light-medium turning tasks. Compatibility with a given holder is governed by form, clearance angle, tolerance class, clamping type, size and thickness; matching these parameters ensures correct seating and repeatable tool positioning. The insert’s 9.52 mm plate thickness and triangular form make it straightforward to integrate into common external holders or boring bars, and the absence of a hole simplifies clamping choices for certain tool systems. Clear dimensional data reduces set-up time and aids process planning for precision turning operations. Predictable chip control and system handling for improved productivity The single-sided chipbreaker is engineered for reliable chip formation in a wide range of turning tasks; pairing this chipformer with the SH725 grade facilitates stable chip flow and diminishes the risk of built-up edge. For system assembly, the indexable insert forms part of a package comprising a corresponding external holder or boring bar, a support shim/clamping set and replacement screws — this modularity streamlines maintenance and replacement procedures. Improved chip control and easier spare-part management translate into higher net machining time and lower process variance, particularly when frequent insert changes are required in production environments. Contact Metav Werkzeuge for genuine Tungaloy inserts, technical selection advice and availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number / SKU: 6843048-Tungaloy Manufacturer SKU: TUN6843048 Manufacturer article number: 6843048 Facts Corner radius: 0.2 mm Insert angle: 60° Free clearance angle: 5° Plate thickness: 9.52 mm Size designation: 07 Special features Grade: SH725 Material: coated carbide Plate form: triangular Hole: without hole Chipbreaker: single-sided Model series: ISO turning indexable inserts Intended use: turning (external and internal) System composition: ISO insert, matching holder or boring bar, support shim/clamping set, replacement screws FAQ What is the primary application for this insert? The TBGR070902 SH725 indexable insert by Tungaloy is intended for turning operations, suitable for both external and internal turning tasks where a triangular 60° geometry is required. Which materials is the SH725 grade best suited to machine? The SH725 coated carbide grade is formulated for resilient cutting-edge performance and is recommended where toughness and stable wear are priorities, particularly in variable engagement conditions and when using smaller tool bodies. How can compatibility with an existing holder be confirmed? Compatibility depends on insert form, clearance angle, tolerance class, clamping type, size and thickness; these parameters should be checked against the holder specifications to ensure correct seating and repeatable positioning. What do the dimensions 0.2 mm and 9.52 mm refer to? The 0.2 mm figure denotes the corner radius, offering a fine cutting edge for finishing and light turning; 9.52 mm is the plate thickness, a key datum for clamping and rigidity considerations. How does the single-sided chipbreaker affect machining? The single-sided chipbreaker promotes consistent chip formation and evacuation in typical turning cuts; pairing the chipbreaker with the SH725 grade helps maintain surface quality and reduces the likelihood of built-up edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TBGR 070902 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH725, precise 0.2 mm corner radius, and ISO compatibility for reliable turning performance; order directly via Metav Werkzeuge or request advice from their consultants. TBGR 070902 SH725 — Turning indexable insert by Tungaloy TBGR070902 SH725 is an ISO‑standard triangular turning indexable insert designed for external and internal turning, offering stable cutting edges for small tools and variable engagement conditions Coated carbide grade SH725 for edge stability Triangular insert, size 07, 5° clearance angle Single-sided chipbreaker for controlled chips Compatible with ISO holders; without centre hole Consistent cutting performance for turning operations The TBGR070902 SH725 is a compact, ISO‑conforming indexable insert engineered to deliver consistent cutting performance in turning tasks. The coated carbide substrate combined with the SH725 grade emphasises edge stability, reducing the risk of premature wear during interrupted cuts or varying engagement. This results in longer tool life and predictable replacement intervals, supporting leaner inventory management and fewer unplanned stops in production. Designed for reliable holder compatibility and simple integration Compatibility with toolholders is determined by the insert’s shape, 5° clearance angle, tolerance class, fastening method, size and thickness. The triangular geometry and standardised ISO designation enable straightforward selection of matching outer holders, shims and clamps. As part of a complete system—insert, holder, shim and replacement screws—the component integrates into existing toolsetups with minimal adjustment, maintaining repeatable positioning and cutting stability. Precise geometry for controlled chips and surface finish The geometry — a 0.2 mm corner radius and 60° included angle — promotes steady engagement and a balanced contact zone, which helps generate a stable cutting force and improved surface quality on turned parts. The single-sided chipbreaker guides chip formation for predictable evacuation, lowering the chance of entanglement on short‑to‑medium turning cycles. These characteristics support efficient machining with clean chip control and reduced rework. Workshop benefits: versatility, productivity and predictable lifecycle As a compact, size 07 insert with a 9.52 mm thickness, the component suits applications where small tool holders are required or where cutting conditions change frequently. The SH725 coating provides a compromise between toughness and wear resistance, making the insert a cost‑effective option for mixed production runs. For procurement and technical queries, Metav Werkzeuge offers product selection support and supply logistics to ensure timely provision of spares and compatible clamping parts. For supply and application advice on the TBGR070902 SH725 turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support and rapid delivery. Technical data Article number: 6843065 Manufacturer SKU: TUN6843065 SKU: 6843065-Tungaloy Product designation: TBGR070902 SH725 Tungaloy insert Dimensions & core data Insert size: 07 Thickness: 9.52 mm Corner radius: 0.2 mm Clearance angle: 5° Included angle: 60° Materials & features Material: coated carbide Coating/grade: SH725 Shape: triangular Chipbreaker: single-sided Hole: without hole Typical application: external and internal turning Model series: ISO turning indexable inserts FAQ Which machining operations is this insert intended for? The TBGR070902 SH725 insert is intended for external and internal turning and is designed to provide stable cutting edges under varying engagement conditions. How is holder compatibility ensured for this insert? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; matching the insert’s triangular form, 5° clearance angle and ISO designation to a suitable outer holder ensures correct clamping and positioning. What advantages does the SH725 grade offer in practice? SH725 is a coated carbide grade formulated for edge stability and toughness, making it suitable for applications with variable engagement or smaller toolholders where reliable edge behaviour is critical. How does the chipbreaker affect machining? The single-sided chipbreaker promotes controlled chip formation and evacuation, improving process reliability and reducing chip‑related interruptions during short to medium turning cycles. What are the key geometry specifications to consider when ordering? Key specs include the 0.2 mm corner radius, 9.52 mm thickness, size 07, 5° clearance angle and 60° included angle; reference the article number 6843065 or the manufacturer SKU TUN6843065 when ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TBPR 040900 SH725 Wendeplatten - Tungaloy
Take advantage of a coated carbide grade SH725 for stable cutting edges and reliable chip control, combined with a 60° triangular geometry and ISO compatibility for straightforward tool integration; order the TBPR040900 SH725 indexable insert through Metav Werkzeuge or consult our specialists for application advice. TBPR 040900 SH725 indexable turning insert – Tungaloy, 60° triangle, coated carbide TBPR040900 SH725 is an ISO‑standard indexable insert designed for general turning applications, offering a 60° triangular geometry and a tough, edge‑stable coated carbide grade for variable engagement conditions. TBPR040900 60° triangular geometry Coated carbide grade SH725 for edge stability Single‑sided chipbreaker for controlled chips ISO‑compatible dimensions, 9.52 mm thickness Reliable edge life and consistent machining performance The coated carbide SH725 grade delivers stable cutting edges under mixed engagement conditions, making it well suited to smaller toolholders and interrupted cuts. The coating enhances wear resistance and reduces flank wear, while the substrate maintains toughness to avoid premature chipping. For machining operations where repeatability and tool life are priorities, this combination reduces unscheduled tool changes and supports a steadier process flow. The coated carbide construction also contributes to improved surface finish and predictable tool behaviour across a broad range of steels and general turning tasks. Simple integration with ISO tool systems and controlled geometry The triangular 60° form provides a compact cutting geometry that is widely compatible with standard external holders and boring bars. Compatibility is determined by insert form, clearance angle (5°), tolerance class, fastening style, size and thickness (9.52 mm) — dimensions that match common ISO tool systems and simplify inventory management. The insert’s single‑sided chipbreaker supports effective chip control in light to medium turning, reducing the risk of tangling and aiding chip evacuation. Where tool changeover speed and parts throughput matter, the clear dimensional standards make setup and replacement straightforward. Productivity through process security and material adaptability Designed for turning, the insert’s SH725 chemistry and geometry prioritise process security and robust chip formation. The grade is particularly effective when cutting under varying conditions or with smaller tooling, offering longer edge life and fewer interruptions. By choosing the appropriate chipbreaker and grade for the workpiece material and cutting strategy, users benefit from improved uptime and predictable performance. For production environments seeking measurable gains in yield and consistency, this insert supports a more economical machining cycle with reliable results. For tailored recommendations on how the TBPR040900 SH725 insert can improve turning operations and to arrange supply through Metav Werkzeuge, please contact our consultants at Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6843006 Manufacturer: Tungaloy Manufacturer SKU: TUN6843006 Model series: ISO‑Drehwendeschneidplatten Brand SKU: 6843006-Tungaloy Facts Insert geometry: 60° triangle Clearance angle: 5° Thickness: 9.52 mm Size: 04 ISO code: 040900 Special features Material: coated carbide (beschichtetes Hartmetall) Grade: SH725 Chipbreaker: single‑sided Mounting: no hole / without hole Application: turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The TBPR040900 SH725 insert is intended primarily for general turning and performs well on a wide range of steels and common turning tasks thanks to the SH725 coated carbide grade. How is holder compatibility determined? Compatibility depends on the insert form, the 5° clearance angle, tolerance class, fastening method, size (04) and thickness (9.52 mm); these parameters ensure correct seating and clamping in ISO‑standard holders. What benefit does the SH725 grade provide? SH725 provides a balance of toughness and wear resistance, promoting stable cutting edges and consistent chip formation under variable engagement conditions, which extends tool life. Can the insert manage interrupted cuts or variable engagement? Yes, the combination of a robust coated carbide substrate and the single‑sided chipbreaker offers improved resilience during interrupted cuts and changing engagement, particularly with smaller tooling. Is this insert suitable for boring bars as well as external holders? The ISO‑standard triangular form and specified dimensions make the insert compatible with appropriately designed external holders and boring bars, provided the holder matches the insert form and dimensional requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TBTR 040400 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide SH725 grade, a compact triangular 60° geometry and a single-sided chipbreaker for predictable chip control and stable cutting-edge life; order the TBTR 040400 SH725 directly via Metav Werkzeuge or consult our advisors for application support. TBTR 040400 SH725 ISO triangular turning insert, 60° — Tungaloy TBTR 040400 SH725 is an ISO‑standard triangular indexable insert designed for external and internal turning, offering a 5° relief and a single‑sided chipbreaker for reliable chip formation. SH725 coated carbide for stable edge life ISO 040400 triangular 60° geometry 5° clearance angle for reliable penetration Single-sided chipbreaker for consistent chips Predictable performance and extended edge life for turning The combination of the SH725 coated carbide grade and the triangular 60° geometry ensures a balance between toughness and wear resistance, which is particularly valuable where engagement conditions vary. The coated carbide substrate provides enhanced surface protection and heat resistance, while the 5° clearance angle minimises flank rubbing and reduces the risk of built-up edge on difficult passes. For manufacturers seeking steady cycle times and fewer insert changes, this configuration supports consistent process outputs and contributes to productive machining across a range of components. ISO compatibility that simplifies tooling management Designed to ISO specifications, the insert fits into a conventional indexable system consisting of a matching outer holder or boring bar, a shim or clamp set and replacement screws. The ISO standardisation of form, tolerance class, mounting and size reduces setup time and inventory complexity, allowing straightforward interchangeability between compatible toolholders. For workshops running mixed batches or rapid changeovers, the standardised geometry and thickness give a quick, verifiable basis for selecting a holder and setup, helping to streamline tool logistics and reduce downtime. Reliable chip control and application versatility The single-sided chipbreaker on this insert promotes predictable chip segmentation during both external and internal turning, improving surface finish and facilitating chip evacuation in automated or confined setups. The stable cutting edge characteristic of the SH725 grade is especially suited to smaller tooling or operations where cut conditions alter frequently; it maintains edge security under intermittent cuts and supports repeatable part quality. For turned components where dimensional consistency and surface integrity matter, the indexable insert’s chip control and edge robustness help deliver measurable productivity gains and lower rework rates. For applications requiring dependable cutting-edge stability choose the Tungaloy TBTR 040400 SH725 and contact Metav Werkzeuge for tailored advice and supply—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and lead times. Technical data Article number: 6842933 Manufacturer SKU: TUN6842933 Our SKU: 6842933-Tungaloy Model series: ISO-Drehwendeschneidplatten Item designation: TBTR040400 SH725 Facts ISO code: 040400 Insert shape: triangular (04) Cutting angle: 60° Relief angle: 5° Thickness: 4.76 mm Special features Material: Cemented carbide (coated) Grade/sort: SH725 Chipbreaker: single-sided Hole style: no hole Typical application: turning (external & internal) System components: compatible with ISO holders, shims, screws FAQ What materials is this insert suitable for? The TBTR 040400 SH725 insert (Tungaloy, SKU 6842933-Tungaloy) is a coated carbide grade intended for a broad range of turning tasks; selection of the chipbreaker and grade should match the specific workpiece material and machining mode. How does the SH725 grade affect performance? SH725 provides a tough, edge‑stable coating designed to maintain cutting-edge integrity under varying engagement conditions, so the TBTR 040400 SH725 supports consistent part quality and longer tool life in interrupted or small-tool operations. Is this insert compatible with standard ISO toolholders? Yes — the insert is ISO‑specified (040400) and compatibility depends on holder form, clearance, tolerance class, mounting style, size and thickness; matching an ISO holder and clamp kit ensures secure seating and repeatable performance. What advantage does the single-sided chipbreaker provide? The single-sided chipbreaker promotes predictable chip formation and evacuation, improving surface finish and reducing the likelihood of chip entanglement in both external and internal turning applications with this insert. Can the insert be used for internal turning? The geometry and chip control features make the insert suitable for internal turning where space and chip evacuation are considerations; use a compatible boring bar and ensure correct clamping to maintain stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TBTR 040450 SH725 Wendeplatten - Tungaloy
Benefit from the combination of durable, coated carbide and ISO‑standard geometry for reliable turning performance. The triangular 60° design with a single‑sided chipbreaker and a 4.76 mm plate thickness delivers stable chip control and predictable tool life. Order directly via Metav Werkzeuge or contact the team for advice on holder compatibility and application setup. TBTR 040450 SH725 triangular indexable turning insert, 60° geometry — Tungaloy The TBTR 040450 SH725 is an ISO‑standard triangular indexable turning insert intended for external and internal turning operations where robust edge stability and versatile chip control are required ISO triangular insert, 60° geometry Coated carbide grade SH725 for toughness Single‑sided chipbreaker for consistent chips 4.76 mm plate thickness for stable clamping Reliable geometry for repeatable turning quality The ISO‑standard triangular shape with a 60° included angle provides a well‑balanced compromise between profile strength and accessibility in both external and internal turning. The established ISO format ensures straightforward holder compatibility when form, relief angle, tolerance class, clamping method, size and thickness are matched. This standardisation simplifies tool selection and reduces setup time, while the triangular form gives multiple usable cutting edges, helping to lower tooling cost per edge and maintain consistent machining results. Tough, coated carbide grade engineered for variable conditions The SH725 grade is a coated carbide designed for edge toughness and resistance to chipping, especially useful on smaller tools or when engagement conditions change. A coated substrate reduces adhesive wear and helps to maintain edge integrity at varying cutting forces; this translates into fewer interruptions for index changes and more predictable component quality. The built‑up‑edge tendency is reduced compared with uncoated substrates, making the insert a solid choice where stability and repeatable performance are priorities. Stable clamping and precise cutting parameters for predictable finishes With a plate thickness of 4.76 mm and a declared corner radius 5, the insert offers mechanical robustness under interrupted cuts. The 5° relief angle supports smooth shear formation while the single‑sided chipbreaker assists in producing manageable chips across a range of feeds. Where holders and clamping sets are correctly chosen for the insert form and size, the result is reduced vibration, improved surface finish and longer effective tool life. The insert’s format and dimensions support straightforward integration into common ISO holders and adaptors. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy turning inserts into production workflows — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6842928 Manufacturer SKU: TUN6842928 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Geometry angle: 60° Plate thickness: 4.76 mm Relief angle: 5° Corner radius: 5 Size designation: 04 Special features Triangular plate shape Single‑sided chipbreaker Coated carbide grade SH725 ISO‑standard insert for turning No hole FAQ What operations is this insert intended for? The TBTR 040450 SH725 insert from Tungaloy is designed for external and internal turning applications where a robust, ISO‑standard triangular geometry is required. How does the SH725 grade affect performance? The SH725 coated carbide grade provides enhanced edge toughness and wear resistance, supporting stable cutting on smaller tools and in varying engagement conditions. Can this insert be used in any ISO turning holder? Compatibility depends on matching the insert form, relief angle, tolerance class, clamping method, size and thickness; the TBTR 040450 is ISO‑standardised to fit appropriately designed holders. What advantages does the single‑sided chipbreaker offer? The single‑sided chipbreaker on this triangular insert helps to produce consistent, controlled chips and supports stable cutting forces, improving surface finish and tool life. What is the correct article number or SKU for ordering? Order using article number 6842928 or manufacturer SKU TUN6842928 for the Tungaloy triangular insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TBTR 040650 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a tough, edge-stable carbide grade (SH725), ISO-compatible triangular geometry and a 5° clearance angle for reliable turning performance; order the TBTR 040650 SH725 inserts via Metav Werkzeuge or consult our specialists for application support. TBTR 040650 SH725 ISO turning insert for Drehen — Tungaloy TBTR040650 SH725 is an ISO triangular turning insert designed for stable cutting under variable engagement conditions and for use in compact tool assemblies Coated carbide grade SH725 Triangular insert, size 04 5° clearance angle for low rubbing Single-sided chipbreaker Increased productivity with an edge-stable grade The SH725 grade is a coated carbide developed for turning where edge stability and toughness are essential. Its formulation reduces the risk of premature edge chipping during interrupted cuts and variable engagement, which translates into longer effective tool life and fewer indexings. For production environments that require predictable cycle times, the SH725 grade contributes directly to process reliability and reduced scrap rates. Consistent cutting geometry for repeatable results The triangular ISO geometry with a 60° included angle and a 5° clearance produces a stable cutting contact and predictable chip flow. A defined corner radius and plate thickness of 6.35 mm ensure mechanical support at the cutting edge, helping to maintain profile accuracy over multiple tool indexings. These geometric properties are especially beneficial in applications with compact holders or when using smaller tools that demand high positional stability. Seamless integration in ISO turning systems Compatibility with holders is determined by form, clearance angle, tolerance class, fastening, size and thickness, allowing straightforward matching to standard ISO toolholders and boring bars. The insert’s single-sided chipbreaker supports controlled chip formation for common turning operations; the triangular form permits three usable cutting edges per index, improving economy per insert. The ISO-standard format simplifies inventory and reduces tooling complexity on the shop floor. Better economy through reduced downtime and easy handling By combining a robust coated carbide substrate with a shape that offers multiple indexable edges, this insert helps reduce changeover frequency and tool-handling time. The system approach — insert, matching external holder or boring bar, and appropriate clamping components — supports fast replacement and secure clamping. In practice, this means less unproductive machine time and a leaner tooling inventory without sacrificing machining quality. Contact Metav Werkzeuge for tailored application advice on the TBTR 040650 SH725 insert and to discuss holder compatibility or batch requirements — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6842929 Manufacturer's SKU: TUN6842929 Label: TBTR040650 SH725 Tungaloy-Wendeplatte Data Thickness: 6.35 mm Insert angle: 60° Clearance angle: 5° Corner radius: 5 Size: 04 Special features Triangular insert, one-sided chipbreaker Coated carbide grade SH725 ISO turning insert series No hole Compatible with ISO holders FAQ What is the primary application of this insert? The TBTR040650 SH725 insert is designed for turning (Drehen) operations, particularly where small tool assemblies or variable engagement conditions occur; the SH725 grade emphasises edge stability. How does the SH725 grade affect machining performance? SH725 is a tough, coated carbide grade that improves resistance to edge chipping under fluctuating loads, which in turn supports longer intervals between indexings and consistent dimensional results. How is compatibility with a holder determined? Compatibility depends on the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; these parameters should be matched to the toolholder or boring bar before assembly. What does a single-sided chipbreaker mean for chip control? A single-sided chipbreaker provides chip control on the active cutting face only, aiding chip formation in standard turning tasks and simplifying orientation when indexing the insert. Does the ISO insert require additional components for mounting? The ISO insert is used as part of a system that typically includes a matching external holder or boring bar, an underlay/clamp set and replacement screws for secure mounting Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TBTR 040900 SH725 Wendeplatten - Tungaloy
The TBTR 040900 SH725 insert combines a wear‑resistant coated carbide grade with a 60° triangular geometry and a substantial 9.52 mm plate thickness to deliver stable cutting and consistent chip control in turning operations. Benefit from improved edge life and reliable performance under varying engagement conditions. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. TBTR 040900 SH725 Tungaloy turning insert — coated carbide, triangular 60° TBTR 040900 SH725 is an ISO‑form turning insert designed for external and internal turning where edge stability and consistent chip control are required. Coated carbide grade SH725 60° triangular geometry 9.52 mm plate thickness Single-sided chipbreaker ISO 040900 compatibility Increased process reliability through a tough cutting grade The SH725 grade is a coated carbide formulation optimised for turning with an emphasis on edge stability and resistance to chipping. In practice, the tougher substrate and coating reduce catastrophic edge failure when using smaller tools or when cutting conditions change rapidly. For production environments this translates into fewer interrupted cycles and better repeatability of dimensions, which supports higher overall equipment effectiveness and lower scrap rates. Clear selection criteria and material adaptability Choosing the right insert involves matching the geometry and chipbreaker to the workpiece and machining conditions. The triangular 60° geometry provides three indexed cutting edges per insert, while the single-sided chipbreaker offers defined chip formation for many common turning tasks. Compatibility with a toolholder depends on form, relief angle, tolerance class, fastening method, size and thickness; these factors ensure proper seating and secure clamping, avoiding unstable setups and poor surface finish. Practical system integration and handling advantages The insert is supplied in the ISO series for use with a corresponding outer holder or boring bar, plus the required clamping or shim set and replacement screws. The 9.52 mm thickness contributes to rigidity in the tool system and helps maintain cutting edge integrity under intermittent cuts. Where high process stability and predictable tool life are priorities, the combination of coated carbide and ISO conformity simplifies tool management and tool‑change planning across multiple machines. For tailored recommendations on using Tungaloy’s SH725 grade in specific turning tasks and for ordering through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6842956-Tungaloy Manufacturer SKU: TUN6842956 Manufacturer article number: 6842956 Model series: ISO-Drehwendeschneidplatten Designation: TBTR040900 SH725 Measurements and core data Geometry angle: 60° Relief (clearance) angle: 5° Thickness: 9.52 mm Size: 04 Hole: without hole Chipbreaker: one-sided Materials and features Material: Coated carbide Grade/coating: SH725 Application: Turning (external & internal) Plate form: triangular ISO designation: 040900 System components: insert, matching holder/boring bar, clamp/shim set, replacement screws Chip control: single-sided chipbreaker Mounting: determined by form, relief angle, tolerance class, fastening, size and thickness FAQ Which turning operations suit this insert best? This insert is intended for general external and internal turning; the TBTR 040900 SH725 indexable insert performs well in interrupted cuts and applications where stable edge behaviour is needed. What does the SH725 grade offer? SH725 denotes a coated carbide grade engineered for toughness and edge stability; it is especially suited to smaller tools or variable engagement where chipping risk is elevated. How is holder compatibility determined? Compatibility depends on insert form, relief angle (here 5°), tolerance class, fastening method, size and thickness (9.52 mm); matching these parameters ensures correct seating and secure clamping. How many effective cutting edges are available per insert? With a triangular 60° geometry the insert provides three indexed edges; the single‑sided chipbreaker defines the usable face for consistent chip control. What are the key dimensions to check before ordering? Check the geometry angle (60°), relief angle (5°), plate thickness (9.52 mm), size (04) and ISO designation (040900); the SKU is TUN6842956 for ordering reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TBTR 040900 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide SH725 grade, ISO‑standard triangular geometry and a single‑sided chipbreaker to secure stable cutting edges and consistent cycle times in turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TBTR 040900 SH725 — Tungaloy triangular ISO turning insert, coated carbide, single‑sided chipbreaker The TBTR040900 SH725 is an ISO‑standard triangular turning insert designed for external and internal turning, offering a tough, edge‑stable coated carbide grade for variable engagement conditions. ISO‑standard triangular insert 04 Coated carbide SH725 for edge stability Single‑sided chipbreaker for chip control 5° relief angle for secure clearance Boosted productivity through a tougher cutting grade The coated SH725 grade offers a tough, edge‑stable performance that is particularly effective in turning applications where engagement conditions change or where smaller tool holders are used. By selecting a coated carbide grade designed for resilience rather than pure wear resistance, the result is fewer unexpected edge failures and reduced machine downtime. This translates into a more predictable process and improved component throughput, especially valuable in production runs where repeatability and consistent surface quality matter. Geometry that ensures secure clamping and reliable chip control The triangular 04 format with a single‑sided chipbreaker combines a robust geometry with simplified chip management. The insert’s 5° relief angle and 60° included angle provide predictable cutting forces and secure clearance, while the absence of a hole means the insert is used with a compatible clamping system. Compatibility is governed by form, relief angle, tolerance class, fastening method, size and thickness, so selecting the appropriate holder and clamp ensures correct seating, repeatable indexing and safe cutting performance. Practical advantages and application guidance For both external and internal turning, the combination of ISO classification, a clearly defined insert size and the SH725 grade helps reduce set‑up time and simplifies inventory. The coated carbide substrate supports long edge life under moderate feeds and interrupted cuts. When choosing an insert for a specific workpiece material, pair the chipbreaker style and the SH725 grade to the material and stability of the set‑up to achieve the best surface finish and tool life. For machinists transitioning from general‑purpose grades, this insert offers a balance between toughness and wear resistance that reduces the need for frequent index changes. Installation, indexing and maintenance considerations Because the insert is supplied without a hole, secure mounting relies on the correct matching of the insert form and the clamping system on the toolholder; ensure the holder accepts triangular ISO‑type inserts of size 04 and thickness 9.52 mm. When indexing, confirm seating and clamp torque to avoid micro‑movement that could shorten edge life. The coated surface assists in reducing built‑up edge and facilitates easier chip evacuation with the single‑sided breaker, which can help maintain consistent cutting conditions and reduce post‑process inspection. Contact Metav Werkzeuge for tailored machining advice on the Tungaloy TBTR040900 SH725 insert, including compatibility checks, recommended holders and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer item number: 6842936 SKU (manufacturer): TUN6842936 SKU: 6842936-Tungaloy Model series: ISO‑turning inserts Core specifications Insert designation: TBTR040900 Grade: SH725 Size: 04 Thickness: 9.52 mm Relief angle: 5° Included angle: 60° Hole: without hole Special features Material: carbide Shape: triangular Chipbreaker: single‑sided Application: turning (external and internal) ISO‑standardised geometry Suitable for variable engagement and smaller holders FAQ What determines holder compatibility for this insert? Compatibility is determined by insert form, 5° relief angle, tolerance class, fastening method, size and thickness; using a holder that matches the ISO triangular 04 geometry ensures correct seating for the TBTR040900 SH725 insert. Which materials is the SH725 grade suited to? The SH725 coated carbide grade is formulated for tough, edge‑stable performance in turning; selection of the chipbreaker and grade should be matched to the workpiece material and machining stability for optimal results. How does the single‑sided chipbreaker affect chip behaviour? A single‑sided chipbreaker guides chip formation on one face to promote controlled evacuation and consistent cutting forces, which can improve surface finish and reduce the risk of chip entanglement in many turning operations. What does 'without hole' mean for mounting? 'Without hole' indicates the insert is clamped by a top clamp or screw in a compatible toolholder rather than located by a centre hole; proper clamp design and torque are important for repeatable performance. Are these inserts ISO‑standardised for easy replacement? Yes, the insert follows ISO turning insert conventions, which simplifies replacement and inventory management when paired with ISO‑compatible holders designed for triangular size 04 inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TBTR 040900 SH725 Wendeplatten - Tungaloy
TBTR 040900 SH725 combines a tough SH725 coated carbide grade with a 60° triangular geometry and a 5° relief to deliver stable cutting edges and reliable chip control in turning operations. Order the insert directly via Metav Werkzeuge or consult their specialists for selection support and availability. TBTR 040900 SH725 TBTR indexable insert for turning – Tungaloy The TBTR040900 SH725 is an ISO‑standard triangular indexable insert designed for external and internal turning, offering a tough coated‑carbide grade suited to variable engagement conditions. ISO‑standard triangular insert 60° SH725 coated carbide grade Single‑sided chipbreaker for controlled chips Compatible with ISO turning toolholders Consistent cutting performance from a tough, coated carbide grade The SH725 coated carbide grade is formulated for edge stability and toughness, which reduces chipping and extends effective cutting life under fluctuating engagement conditions. A coating over a carbide substrate moderates heat transfer and wear, so the insert maintains a reliable cutting edge during short interrupted cuts and varying depths of cut. This results in fewer unplanned changeovers and more consistent part quality on production lines that require repeatable turning cycles. Versatile geometry and compatibility for straightforward tool selection The triangular 60° form with a 5° relief offers a balance between positive cutting action and robustness; the 04 size and a plate thickness of 9.52 mm make this insert suitable for compact toolholders and smaller‑diameter applications. Compatibility with a holder depends on the insert’s form, relief angle, tolerance class, fastening, size and thickness — factors that ensure correct seating and clamping. Choosing the matching holder and clamp fastener simplifies setup and reduces fixture adjustments, thereby saving machine time. Economical uptime and improved surface results Using a grade optimised for a wide range of turning tasks yields tangible operational benefits: fewer tool changes, stable dimensional accuracy across runs and predictable surface finishes. The single‑sided chipbreaker design supports controlled chip formation, lowering the risk of recutting and improving surface integrity on turned parts. For production environments aiming for high throughput with minimal intervention, the combination of grade and geometry offers strong return on process stability. Practical mounting details and assembly considerations The insert is triangular, no hole design and therefore requires a compatible clamp style and screw for secure mounting. Correct selection of the clamping plate and torque settings is essential to prevent movement and to preserve the cutting edge. The insert belongs to the ISO turning indexable inserts family and is supplied in the TBTR form, so checking holder compatibility against the ISO code 040900 and the designation TBTR040900 avoids dimensional mismatch and facilitates quick replacement during routine maintenance. For application advice or to secure supply of the TBTR 040900 SH725 Tungaloy indexable insert, contact Metav Werkzeuge for tailored recommendations and stock information via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6842943 Manufacturer SKU: TUN6842943 SKU: 6842943-Tungaloy Designation: TBTR040900 ISO code: 040900 Series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Included angle: 60° Relief angle: 5° Plate thickness: 9.52 mm Plate size: 04 Special features Material: coated carbide Grade: SH725 Shape: triangular (TBTR) Chipbreaker: single‑sided Hole: none Typical application: external and internal turning Compatibility: determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What geometry does this insert have? The insert is a triangular indexable insert with a 60° included angle, a 5° relief, plate size 04 and a plate thickness of 9.52 mm; it features a single‑sided chipbreaker and no central hole. Which cutting grade and coating are used? The TBTR 040900 is supplied in the SH725 grade, a coated carbide designed for toughness and cutting‑edge stability in turning applications. Is this insert suitable for internal turning? Yes, the insert is intended for both external and internal turning operations as part of the ISO turning indexable inserts series. How is the insert mounted in the holder? As a no‑hole triangular plate, TBTR040900 requires a compatible clamp and screw type; correct holder selection and clamping torque ensure secure seating and consistent performance. How can compatibility with an existing toolholder be verified? Compatibility is verified by matching the insert form (TBTR), relief angle (5°), tolerance class, fastening method, size (04) and thickness (9.52 mm) with the holder specifications; check the ISO code 040900 for exact fit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TBTR 070900 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of stable cutting-edge performance, ISO compatibility and reliable chip control for consistent turning operations. Order original Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TBTR 070900 SH725 turning insert, triangular 60° – Tungaloy TBTR 070900 SH725 is an ISO-series triangular turning insert for external and internal turning, designed for stable cutting edges and predictable chip formation ISO 070900 triangular insert design Coated carbide grade SH725 for stability 5° relief angle for versatile engagement Single-sided chipbreaker for controlled chips Greater process stability through a resilient grade The coated carbide grade SH725 delivers a balance of toughness and edge stability suited to varied turning tasks, notably where engagement conditions change or smaller tools are used. As a coated carbide insert, it reduces flank wear under intermittent cuts and maintains a consistent cutting edge, which translates into fewer indexings and improved cycle times. For machining teams seeking predictable performance, the choice of a tougher grade supports reduced downtime and steadier component quality. ISO geometry and chip control for reliable mounting Built to ISO specifications, the triangular 60° geometry with a 5° relief angle ensures compatibility with a wide range of external holders and boring bars. The insert is a size 07 triangular plate with a thickness of 9.52 mm and is supplied without a hole, so compatibility depends on holder form, relief geometry, tolerance class, clamping method, size and thickness. The integrated single-sided chipbreaker promotes consistent chip segmentation and evacuation on facing and turning passes, reducing recut risk and easing chip handling in automated cells. Practical system integration and application guidance The ISO turning system is completed by a matching external holder or boring bar, a seating pad or clamp set and replacement screws; selecting the correct chipbreaker and grade should follow the workpiece material and the intended operation. Typical uses include both external and internal turning where stable cutting edges and good chip control are priorities. The TBTR070900 SH725 insert is especially practical where varying depths of cut and entry conditions occur, offering operators a robust solution that supports repeatable surface finish and extended tool life. For tailored advice on applying original Tungaloy TBTR 070900 SH725 inserts in specific turning processes, contact Metav Werkzeuge for direct procurement and consultancy support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6842972 Manufacturer SKU: TUN6842972 Model series: ISO-Drehwendeschneidplatten Material: carbide Grade/coating: SH725 Label: TBTR070900 SH725 Tungaloy-Wendeplatte Facts Geometry: triangular, 60° Relief angle: 5° Thickness: 9.52 mm Size designation: 07 Hole: without hole Chipbreaker: single-sided Special features Application: turning (external and internal) Schneidstofftyp: coated carbide Typical system components: insert, holder/boring bar, seating pad/clamp, screws Compatibility determined by form, relief, tolerance, clamping, size, thickness FAQ What materials is this insert suited for? The TBTR 070900 SH725 turning insert (Tungaloy, SKU TUN6842972) is a coated carbide grade designed for a broad range of turning tasks; select the chipbreaker and machining parameters according to the specific workpiece material. How does the 5° relief angle affect performance? A 5° relief angle provides versatile engagement for general turning operations; it aids stable contact under variable depths of cut while maintaining a reliable cutting edge geometry for the TBTR 070900 SH725 insert. Is this insert compatible with standard ISO triangular holders? Yes — the TBTR 070900 follows ISO plate geometry; compatibility depends on holder form, clamp type, tolerance class, size and plate thickness (9.52 mm). What benefit does the single-sided chipbreaker provide? The single-sided chipbreaker on this insert promotes predictable chip segmentation and evacuation during facing and turning passes, reducing the risk of long, entangling chips and easing handling in automated setups. Can the insert be used for internal turning (boring)? The insert is suitable for internal turning when mounted in a compatible boring bar or holder matched to the ISO triangular geometry and the insert’s thickness and size. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080102 NS9530 Wendeplatten - Tungaloy
The combination of a compact triangular design, a NS9530 cermet grade for fine finishing and a 0.2 mm radius delivers precise parting and grooving results in confined setups; order directly from Metav Werkzeuge or request advice from our consultants for application support. TCGT080102 NS9530 Tungaloy indexable insert – compact parting and grooving for turning, 60° main angle The TCGT080102 NS9530 Tungaloy indexable insert is a compact triangular plate engineered for precise parting-off and grooving in turning operations where installation space is limited. Compact triangular insert for tight spaces NS9530 uncoated cermet for fine finish Low cutting forces and sharp cutting edge Precision finishing in restricted work envelopes The TetraForce-Cut series insert offers a compact geometry that converts limited clamping room into reliable finishing capability. The NS9530 cermet grade is formulated for steel finishing, delivering a consistently sharp cutting edge and low cutting forces; this reduces vibration and helps achieve a high surface quality on continuous cuts and small depths of cut. The triangular format maximises usable edges while keeping the insert footprint small, so multiple index positions extend tool life without requiring larger toolholders. Consistent performance and easier process planning Low cutting forces and the one-sided chipbreaker design provide predictable chip control and stable cutting conditions during repetitive turning operations. The 0.2 mm radius and the controlled geometry with a 7° clearance minimise edge chipping in finishing passes and improve batch-to-batch repeatability. These technical attributes translate directly into less rework and more reliable cycle times, helping to streamline production planning in component machining. Application guidance for dependable results Intended primarily for parting-off and grooving in turning, the insert performs best under continuous cuts and small feedrates typical of finishing operations in steel. The uncoated cermet grade excels where a fine surface and minimal cutting forces are priorities. For operators less familiar with cermet behaviour: cermet offers superior wear resistance and a fine-grained edge, so moderate cutting temperatures and steady feed help exploit the grade’s strengths without compromising edge integrity. System compatibility and handling benefits The insert is supplied for use within a compact system comprising holder, inserts and fastening screws, and its triangular form with a central hole and a cylindrical hole plus one-sided countersink (40°–60°) ensures secure clamping and straightforward mounting. The moderate plate thickness supports rigidity while the small size reduces interference in narrow grooves. Together, these design choices make the insert an efficient option when tool access and space limit the choice of tooling. Contact Metav Werkzeuge to discuss the Tungaloy NS9530 finishing insert and receive tailored advice on holder selection and process parameters; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997955 Manufacturer SKU: TUN6997955 Label: TCGT080102 NS9530 Tungaloy-Wendeplatte Facts Main angle: 60° Corner radius: 0.2 mm Clearance angle: 7° Plate thickness: 1.59 mm Plate size: 08 Special features Uncoated NS9530 cermet grade Triangular plate form With hole; cylindrical hole + one-sided countersink (40°–60°) One-sided chipbreaker System: holder, inserts and screws Model series: TetraForce-Cut Intended use: parting-off and grooving for finishing in steel FAQ What materials is this insert best suited for? The TCGT080102 NS9530 Tungaloy indexable insert is optimised for finishing in steel, where the NS9530 cermet provides a sharp edge and low cutting forces. Does the insert include a chipbreaker and what is its function? Yes, the plate features a one-sided chipbreaker; it improves chip control during continuous cuts and helps maintain stable cutting conditions for consistent surface quality. How is the insert secured to the holder? The TetraForce-Cut insert is designed with a central hole and a cylindrical hole plus one-sided countersink (40°–60°) for positive clamping in compatible holders, providing reliable fixation for parting and grooving tasks. What advantage does the 0.2 mm radius offer in finishing? A 0.2 mm radius combines edge strength with the ability to produce a fine surface in finishing passes, reducing the risk of edge chipping while maintaining good surface integrity. Is this insert suitable for small workpieces and tight setups? Yes, the compact triangular geometry of the TCGT080102 NS9530 insert is intended for limited installation spaces and small components where accessibility is restricted. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080102 TH10 Wendeplatten - Tungaloy
Take advantage of the compact design and the TH10 uncoated carbide grade for consistently low cutting forces and clean parting in confined spaces. Combine precise geometry and a 0.2 mm corner radius for reliable, repeatable separation of small components. Order directly via Metav Werkzeuge or ask the consultants for application-specific advice. TCGT 080102 TH10 Tungaloy — Compact parting insert for turning (Drehen) A TCGT080102 TH10 indexable insert, designed for compact parting and grooving operations in turning where space is limited. Compact parting system for small components Uncoated carbide TH10 for low cutting forces 60° geometry with 0.2 mm corner radius Triangular plate, 1.59 mm thickness, with hole Maximise throughput in constrained turning setups The insert is part of a compact parting and grooving system engineered for small components, allowing shops to maintain cycle times where larger tooling cannot fit. The triangular plate and reduced thickness support tight overhangs and minimise vibration, which in turn stabilises cutting conditions and reduces the risk of chatter. With the TetraForce-Cut series construction and a 60° leading angle, the design prioritises secure seating in indexable holders and consistent engagement during the separation cut. Achieve cleaner surfaces with lower cutting forces Thanks to the TH10 uncoated carbide grade, the cutting edge delivers low friction and a sharp profile that supports clean separation of non-ferrous materials and similar workpieces. The modest 0.2 mm corner radius balances edge strength with fine finish capability, so the insert produces a smooth parting surface without excessive burr formation. For users less familiar with insert metallurgy, uncoated grades often reduce built-up edge tendencies and can be preferable when heat-sensitive or softer alloys are machined. Easy integration and predictable set-up for workshop use The plate’s cylindrical hole with a single-sided countersink (40°–60°) enables straightforward clamping and reproducible positioning in compatible holders, helping to cut set-up time. The 1.59 mm plate thickness and standard plate size facilitate replacement within compact tool systems without modifying toolposts. Where process stability matters, the single-sided chipformer contributes to controlled chip flow during brief, high-precision parting cycles, supporting repeatable results across small batch runs. For precision parting recommendations or to specify inserts for a particular holder, contact Metav Werkzeuge for tailored advice — info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6807613 SKU: 6807613-Tungaloy Manufacturer SKU: TUN6807613 Model series: TetraForce-Cut Plate designation: TCGT080102 Facts Nose angle: 60° Corner radius: 0.2 mm Relief angle: 7° Plate thickness: 1.59 mm Plate size: 08 Special features Material: carbide Grade/coating: TH10, uncoated Plate shape: triangular Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipformer: single-sided Application: parting and grooving (turning) Typical use: non-ferrous materials and low-force cutting applications FAQ Is this insert suitable for aluminium and other non-ferrous materials? Yes. The TH10 uncoated carbide grade is intended for non-ferrous materials and applications where a sharp, uncoated cutting edge helps to keep cutting forces low and surfaces clean. Which holder types are compatible with the plate geometry? The triangular plate and the cylindrical hole with a single-sided countersink are designed for compact parting holders that accept TCGT-style inserts; the geometry ensures stable clamping and repeatable positioning. What does the 0.2 mm corner radius mean for finish and edge strength? A 0.2 mm corner radius offers a compromise between a fine surface finish and edge robustness; it helps to reduce burrs while maintaining sufficient strength for parting small components. Can this insert be used for finishing grooves as well as parting? Yes. The combination of the 60° geometry and the TH10 grade allows for precise cutting in narrow grooves and controlled parting operations, producing consistent results in constrained spaces. What is the manufacturer part number and how is the item referenced? The insert is listed under manufacturer article number 6807613 and is referenced as TCGT080102 TH10, SKU 6807613-Tungaloy for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080200 J740 Wendeplatten - Tungaloy
Take advantage of the ISO format, robust J740 carbide grade and a precise 7° clearance to maintain steady production and predictable edge life; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and chipbreaker selection. TCGT080200 J740 — ISO triangular indexable insert for turning (Tungaloy) TCGT080200 J740 is an ISO-format triangular indexable insert designed for turning applications, combining a wear-resistant carbide grade with a secure clamping geometry for consistent machining performance ISO triangular insert, 60° included angle Tungaloy J740 carbide grade, wear-resistant 7° clearance angle for stable cutting Cylindrical hole with 40°–60° countersink Engineered for consistent turning performance The TCGT080200 J740 insert pairs an ISO-standard triangle geometry with a 60° included angle to deliver predictable cutting engagement on both external and internal turning tasks. The J740 grade from Tungaloy is a carbide formulation optimised for a balance of wear resistance and edge toughness, which reduces flank wear and extends in-process tool life. As a result, the insert supports longer uninterrupted cycles and fewer index changes, helping to maintain throughput in batch and series production environments. Secure clamping and precise fit reduce vibration Compatibility with the chosen toolholder depends on form, clearance angle, tolerance class, mounting method, size and thickness; the 7° clearance and the triangular form ensure correct seating and repeatable positioning. The insert is supplied with a cylindrical hole plus a one-sided countersink (40°–60°), enabling reliable clamp engagement and torque control. These features reduce micro-movements at the cutting edge, lowering vibration and improving surface finish while simplifying setup checks in the workshop. Controlled chip formation and adaptable application Equipped with a single-sided chipbreaker, this insert facilitates controlled chip flow for many turning operations when combined with the right holder and cutting parameters. The chipbreaker design supports consistent chip segmentation and evacuation, which mitigates the risk of built-up edge and enhances surface integrity on the workpiece. Selection of the chipbreaker and the J740 grade should match the workpiece material and machining stability to achieve the best balance between productivity and tool life. Practical integration into ISO tooling systems As an ISO-format indexable insert, this item fits into standard systems comprising holder, shim and clamp set and replacement screws, enabling straightforward replacement and inventory management. The 2.38 mm plate thickness and size 08 designation offer a compact solution for medium-duty turning tasks while maintaining sufficient rigidity for repeatable results. The manufacturer article and SKU simplify ordering and spare-part matching for procurement and maintenance teams. Contact Metav Werkzeuge for advice on holder compatibility, the Tungaloy TCGT080200 J740 insert and recommended chipbreaker selection Technical data Article number: 6807617 Manufacturer SKU: TUN6807617 Model series: ISO turning indexable inserts Product name: TCGT080200 J740 Core data Included angle: 60° Clearance angle: 7° Plate thickness: 2.38 mm Size: 08 Special features Triangular insert, ISO format Carbide material (Tungaloy grade J740) With cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Intended for turning applications Compatibility depends on form, clearance, tolerance class, clamping, size and thickness FAQ What turning tasks is the insert suited for? The TCGT080200 J740 indexable insert is designed for general external and internal turning operations where a balance of wear resistance and edge stability is required. How does the J740 grade affect performance? The Tungaloy J740 carbide grade provides a compromise of wear resistance and toughness, improving tool life and edge stability under varied cutting conditions. What clamping features should be checked for compatibility? Ensure the holder matches the ISO form, the plate thickness (2.38 mm), the 7° clearance and the triangular seating; the cylindrical hole with one-sided countersink must align with the clamp system. Can the same insert be used for finishing and roughing? The insert can perform both roles when paired with an appropriate chipbreaker, cutting parameters and sufficient stability; selection should consider workpiece material and desired surface finish. What information is helpful when ordering replacements? Provide the product designation TCGT080200 J740, article number 6807617 or manufacturer SKU TUN6807617 to ensure correct supply and spare-part matching. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080200 J740 Wendeplatten - Tungaloy
Take advantage of the combination of robust J740 carbide performance, ISO-standard compatibility and a secure mounting design for consistent turning productivity; order directly via Metav Werkzeuge or consult our specialists for application advice. TCGT 080200 J740 — Turning insert (triangular, 7° clearance) by Tungaloy The TCGT080200 J740 insert is an ISO‑standard triangular turning insert intended for external and internal turning, offering a balanced combination of wear resistance and edge stability for a wide range of workpiece materials. ISO triangle insert TCGT080200 J740 Tungaloy carbide with balanced wear resistance 7° clearance for secure cutting geometry Cylindrical hole with 40°–60° countersink Maximise machining reliability with a proven carbide grade The triangular indexable tip delivers a compact, stable contact area that supports repeatable cutting performance in turning operations. Manufactured in a carbide grade optimised as J740, the insert combines wear resistance with sufficient toughness to withstand interrupted cuts and variable material conditions. The ISO‑conforming designation guarantees interchangeability with standard holders, reducing setup time and enabling predictable tool life. This results in improved process security and fewer unscheduled tool changes, which directly benefits production throughput. Secure clamping and predictable chip control for efficient setup The insert's cylindrical hole with a single‑sided countersink (40°–60°) provides reproducible seating and a firm clamping interface in compatible toolholders. The 7° clearance and the triangular form create a defined cutting geometry that stabilises the cutting edge and facilitates chip flow when using the single‑sided chipbreaker. As a result, the system reduces vibration and improves surface finish while easing tool changeovers. Compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness, so selecting a matching holder and clamping kit is essential for optimal results. Practical benefits: geometry, dimensions and application scope With a nominal size designation of 08, a plate thickness of 2.38 mm and an included 60° point angle, the insert is tailored for general turning tasks where compact edge geometry and reliable edge life are priorities. The single‑sided chipbreaker supports effective chip control for a broad range of feeds and depths of cut, helping to maintain tool life and consistent part quality. The insert’s ISO series construction means spare parts and replacements are straightforward to source and install, supporting shorter machine downtime and steady production rhythms. For tailored advice on using Tungaloy J740 inserts in specific turning applications, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our team will recommend the ideal holder and cutting parameters. Technical data Article number: 6807614 Manufacturer SKU: TUN6807614 SKU: 6807614-Tungaloy Model series: ISO turning inserts Designation: TCGT080200 J740 Core specifications Size: 08 Thickness: 2.38 mm Relief / clearance: 7° Point angle: 60° Hole and countersink: cylindrical hole with single‑sided countersink (40°–60°) Materials & special features Material: carbide Chipbreaker: single‑sided Plate form: triangular Application: turning Mounting: ISO‑standard insert for compatible holders FAQ What materials can this insert machine effectively? The TCGT080200 J740 insert is a versatile carbide grade designed for general turning and offers balanced wear resistance and edge stability suitable for a wide range of steels and alloyed materials when appropriate cutting data are applied. Is the insert compatible with standard ISO holders? Yes, the ISO designation and the cylindrical hole with countersink ensure compatibility with holders that accept TCGT‑style triangular inserts; correct matching by form, clearance and size is required. What does the J740 grade mean for tool life? J740 denotes Tungaloy’s carbide grade formulated to balance wear resistance and toughness, which in practice supports longer edge life and consistent performance under typical turning conditions. How does the single‑sided chipbreaker affect machining? The single‑sided chipbreaker promotes predictable chip formation and evacuation for many turning tasks, improving surface finish and reducing the risk of chip entanglement during production. Which product codes identify this item for ordering? Order references include article number 6807614 and manufacturer SKU TUN6807614 for the TCGT080200 J740 turning insert from Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080200 SH7025 Wendeplatten - Tungaloy
Take advantage of a combination of coated carbide SH7025 for durable edge life, a triangular ISO TCGT 080200 form for broad holder compatibility, and a secure cylindrical hole with countersink for stable clamping; order the TCGT080200 SH7025 insert directly via Metav Werkzeuge or ask our consultants for selection support. TCGT 080200 SH7025 — ISO triangular turning insert for turning by Tungaloy The TCGT080200 SH7025 is an ISO‑normed triangular indexable insert engineered for general turning tasks, offering stable cutting performance in variable engagement conditions. Coated carbide grade SH7025 Triangular ISO TCGT 080200 form 7° relief angle for stable cutting Cylindrical hole with countersink Consistent cutting performance under changing conditions The insert’s SH7025 coated carbide composition is formulated for toughness and edge‑stability, making it particularly suitable where tool engagement varies or inserts are small. The coating enhances wear resistance while maintaining reliable cutting edges, which reduces downtime from frequent index changes. Selecting a matching chipbreaker and grade according to the workpiece and operation enables consistent chip control and improved surface finish; the provided single‑sided chipbreaker supports defined chip formation for many turning tasks. Secure clamping and ISO compatibility for reliable set‑ups Designed to the ISO TCGT 080200 specification, the insert’s triangular geometry and dimensional tolerances ensure compatibility with a wide range of external holders and boring bars. The cylindrical hole with one‑sided countersink (40°–60°) secures the insert reliably in its seat, while the 7° relief angle and 60° included angle contribute to cutting stability and predictable tool behaviour. These features make setup verification straightforward: form, relief, tolerance class, fixation method, size and thickness determine compatibility with the chosen toolholder. Practical handling, selection and application notes With a thickness of 2.38 mm and an ISO‑08 size, the insert suits many standard turning operations, including both external and internal turning when a compatible holder is used. The single‑sided chipbreaker directs chips effectively for typical turning feeds and depths, and the coated carbide substrate balances wear resistance with toughness for variable engagement. Assemble the tool system with the suggested support: appropriate external holder or boring bar, shim/underlay, clamp set and replacement screws to maintain clamping integrity and repeatable results. For tailored advice on selecting the right Tungaloy grade and chipbreaker for specific turning tasks, contact Metav Werkzeuge for technical guidance and product availability. Technical Data Article number: 6967532 Manufacturer SKU: TUN6967532 SKU: 6967532-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: TCGT080200 SH7025 Tungaloy‑Wendeplatte Core specifications ISO code: 080200 Size: 08 Thickness: 2.38 mm Included angle: 60° Relief angle: 7° Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Versions / Special features Material: carbide (Hartmetall) Coating / grade: SH7025 (coated carbide) Plate shape: triangular Chipbreaker: single‑sided Application: Turning (external and internal) FAQ What is the primary advantage of the SH7025 grade? The SH7025 grade provides a coated carbide combination that emphasises toughness and edge stability, which is beneficial for inserts used in smaller tooling or operations with varying engagement. Is the insert compatible with standard ISO toolholders? Compatibility depends on form, relief angle, tolerance class, fixation method, size and thickness; the ISO TCGT 080200 geometry is designed to fit common holders specified for TCGT inserts. How does the insert’s hole design influence clamping? The cylindrical hole with a one‑sided countersink ensures secure clamping and correct seating of the insert, helping to maintain repeatable positioning and stable cutting forces. Which operations suit this triangular insert? The insert is intended for general turning operations, both external and internal, where a triangular insert of size 08 and 2.38 mm thickness meets the toolholder requirements. What should be considered when choosing the chipbreaker? Select a chipbreaker that matches the workpiece material, feed and depth of cut; the supplied single‑sided chipbreaker offers predictable chip formation for many turning scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080200 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide grade (SH725), a 60° triangular geometry and a precise 7° clearance angle for reliable chip control and long edge life in diverse turning tasks; order or request guidance via Metav Werkzeuge for compatible holders and mounting advice. TCGT 080200 SH725 Tungaloy turning insert — 60° triangle, 7° clearance TCGT 080200 SH725 is an ISO-standardised indexable turning insert designed for general external and internal turning where stable cutting edges and predictable chip formation are required. 60° triangular insert for external and internal turning SH725 coated carbide for edge stability 7° clearance angle; cylindrical hole & countersink ISO TCGT080200 size 08, thickness 2.38 mm Consistent edge stability for variable turning conditions The SH725 grade is a coated carbide developed for edge stability under changing engagement conditions and on smaller tool assemblies. Its composition provides a balance between toughness and wear resistance, which reduces the risk of chipping when cuts vary or interruptions occur. Using an insert with this grade typically results in fewer unscheduled tool changes and a more consistent surface finish, contributing to a smoother production flow. The indexable insert format furthermore allows fast replacement, limiting machine downtime and keeping process costs predictable. ISO compatibility and secure clamping reduce set-up time Being an ISO-standardised insert, the TCGT080200 geometry ensures straightforward matching with ISO holders when the form, relief angle, tolerance class, clamping method, size and thickness are aligned. The 60° triangle form gives three usable cutting edges per insert, while the 2.38 mm thickness and 7° clearance angle provide a stable mounting envelope for a wide range of turning operations. The central cylindrical hole with a single-sided 40°–60° countersink secures repeatable seating and prevents rotation under load, which supports dependable cutting performance and reduces assembly errors during tool changeovers. Predictable chip control and recommended uses A single-sided chipbreaker on this insert is optimised for controlled chip flow in many turning scenarios; selecting the correct chipbreaker geometry and the SH725 grade tailored to the workpiece and process stability is essential. Typical applications include external and internal turning where moderate to variable cutting conditions occur. The coated substrate supports reduced built-up edge and improves tool life in interrupted cuts. For best results, pair the insert with a suitable external holder or boring bar that matches the insert seat and clamping specifications to maintain the designed cutting angles and ensure consistent productivity. Contact Metav Werkzeuge for compatibility checks and to order matching holders for the TCGT 080200 SH725 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6737022 SKU: 6737022-Tungaloy Manufacturer SKU: TUN6737022 Model series: ISO-Drehwendeschneidplatten Type designation: TCGT080200 SH725 Facts Geometry: triangular, 60° Size: 08 Thickness: 2.38 mm Clearance angle: 7° Hole: with hole Special features Grade/coating: SH725 (coated carbide) Material: carbide Chipbreaker: one-sided Hole style: cylindrical hole with single-sided countersink (40°–60°) Intended application: turning (external and internal) ISO-standard insert, compatible with matching ISO holders FAQ What turning tasks is this insert best suited for? The TCGT 080200 SH725 insert is intended for general external and internal turning where edge stability and controlled chip formation are required, particularly in operations with variable engagement. How does the SH725 grade affect tool life? The SH725 coated carbide delivers a combination of toughness and wear resistance that improves edge stability and reduces chipping, supporting longer effective tool life under fluctuating cutting conditions. Which holder features are essential for correct use? Compatibility depends on holder form, relief angle, tolerance class, clamping and size/thickness—matching these parameters to the TCGT080200 specification ensures secure seating and reproducible performance. Can the insert be used for interrupted cuts? Yes; the coated carbide substrate and edge-stable SH725 formulation make this insert suitable for interrupted cuts, especially when mounted in a properly rated holder. How is chip control achieved with this geometry? Chip control is provided by the one-sided chipbreaker pattern combined with the insert’s cutting geometry; choosing the correct chipbreaker style and the SH725 grade helps maintain stable chip flow. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080200 SH725 Wendeplatten - Tungaloy
Combining the SH725 coated carbide grade with a 7° clearance and a triangular 08 form gives consistent edge stability and reliable chip control for a wide range of turning tasks; order the insert directly via Metav Werkzeuge or consult the team for material-specific recommendations. TCGT 080200 SH725 turning indexable insert by Tungaloy — triangular 08, 7° clearance A TCGT 080200 SH725 ISO triangular indexable insert designed for external and internal turning where edge stability and repeatable chip formation are required. ISO triangular 08 form for secure seating SH725 coated carbide for durable edges 7° clearance for versatile turning use Single-sided chipbreaker for consistent chips Higher productivity through stable cutting edges The combination of the SH725 coating and the underlying coated carbide substrate is focused on preserving cutting-edge integrity under variable engagement conditions. This results in longer intervals between index changes and fewer unplanned stoppages, improving overall machining throughput. The wear-resistant grade is particularly effective on smaller tooling set-ups and where cuts vary in depth, helping to maintain component tolerances and reduce rework. Geometry tuned for repeatable chip control and surface quality The triangular 08 plate form with a 60° included angle and a 7° clearance provides a balance of strength and accessibility for a range of turning operations. A single-sided chipbreaker guides chips away from the cutting zone, lowering the risk of built-up edge and promoting a stable surface finish. The plate’s 2.38 mm thickness contributes to rigidity, and the central hole with a cylindrical body plus a one-sided countersink (40°–60°) ensures positive clamping in standard ISO holders. Practical system compatibility and selection guidance Compatibility with toolholders depends on form, clearance angle, tolerance class, fastening method, size and thickness; this insert follows ISO conventions for secure interchangeability within modular turning systems. For reliable results, choose the chipbreaker and grade to match workpiece stability and machining strategy. The insert integrates into common holder/boring-bar setups and is intended as part of a system that includes an appropriate clamp and replacement screws. Clear advantages for workshop planning and flexibility Specifying an ISO indexable insert of this type simplifies stockkeeping and process planning: the standardised geometry allows fast changeovers and predictable repeatability. The wear characteristics of the SH725 grade reduce the frequency of tool inspections while the coated surface assists in thermal and chemical resistance during continuous operations. Together, these properties support efficient batch runs and stable small-batch production alike. Contact Metav Werkzeuge for tailored advice on Tungaloy indexable inserts and application-specific recommendations — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6737026 Manufacturer SKU: TUN6737026 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Numbers Inclination angle: 60° Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 08 ISO code: 080200 Special features Triangular plate form With hole: cylindrical + one-sided countersink (40°–60°) Single-sided chipbreaker Coating/grade: SH725 Material: carbide Intended application: turning FAQ What operations is this insert intended for? The TCGT 080200 SH725 indexable insert is intended for external and internal turning operations, designed to deliver stable cutting performance in variable engagement conditions. Which material grade and coating does the insert have? This insert uses the SH725 coated carbide grade, selected for edge stability and consistent wear behaviour during turning. How is holder compatibility ensured? Compatibility is determined by form, clearance, tolerance class, fastening, size and thickness; the ISO designation 080200 supports interchangeability with matching ISO holders. What benefit does the single-sided chipbreaker provide? The single-sided chipbreaker promotes controlled chip flow and reduces built-up edge, contributing to a steadier surface finish and safer chip evacuation compared with uncontrolled chips. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080200 TH10 Wendeplatten - Tungaloy
Take advantage of the proven combination of ISO‑standard geometry and a sharp, uncoated carbide TH10 grade for efficient turning operations; the triangular 08 form with a 7° clearance angle and a 60° cutting angle supports low cutting forces and consistent surface quality. Order this insert or request technical advice directly via Metav Werkzeuge or consult the team for application guidance. TCGT 080200 TH10 triangular indexable turning insert by Tungaloy — triangular 08, 7° clearance, with hole The TCGT080200 TH10 is a triangular ISO indexable insert for external and internal turning, optimised for non‑ferrous materials and applications that benefit from a sharp, uncoated cutting edge. ISO‑standard triangular insert 08 Uncoated TH10 carbide grade Single‑sided chipbreaker, with hole 7° clearance angle for low cutting forces Suitable for turning of non‑ferrous materials Increased productivity through standardised geometry and low cutting forces The triangular indexable insert follows ISO‑standard dimensions, which simplifies toolholder compatibility and reduces machine downtime caused by fitting errors. With a 7° clearance angle and a 60° main cutting angle, the geometry lowers cutting forces and helps maintain stable chip flow when machining softer or non‑ferrous materials. The uncoated carbide TH10 grade provides a reliably sharp cutting edge that promotes a clean surface finish and reduces the need for secondary finishing in many applications. For production environments where repeatability and predictability matter, these properties translate into measurable cycle‑time savings and consistent part quality. Practical selection and secure clamping for reliable turning Compatibility with the clamping system is determined by form, relief angle, tolerance class, fastener type, size and thickness; the insert’s triangular 08 form and cylindrical hole with a single‑side countersink (40°–60°) ensure secure mounting and correct seating in ISO‑compliant holders. The single‑sided chipbreaker design assists chip control on the intended cutting edge, while the 2.38 mm plate thickness provides stable support under cutting loads. Selecting the matching holder and screw from the same ISO family reduces set‑up time and increases process reliability on both external and internal turning tasks. Application advantages and material suitability Designed for turning, the insert is particularly suited to non‑ferrous workpieces where a sharp, uncoated edge helps reduce built‑up edge and maintain low cutting forces. The combination of uncoated carbide and the TH10 grade supports neat chip formation and good surface integrity when machining aluminium, brass, and similar materials. When the machining task demands a balance between edge sharpness and tool life, the TH10 grade provides a practical compromise: effective for high‑quality finishes while remaining straightforward to recondition or replace within standard tool management processes. For supply, technical matching or further advice on Tungaloy TH10 grade turning inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for prompt consultation and availability. Technical Data Article number: 6807616 Manufacturer SKU: TUN6807616 Supplier SKU: 6807616-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: carbide Facts Insert designation: 080200 (ISO code) Plate size: 08 Plate thickness: 2.38 mm Relief/clearance angle: 7° Main cutting angle: 60° Hole: with cylindrical hole + one‑side countersink (40°–60°) Special features Grade: TH10 Uncoated carbide cutting edge Single‑sided chipbreaker Triangular plate form Application: turning (external and internal) FAQ What materials is this insert intended for? The TCGT080200 TH10 insert is designed primarily for non‑ferrous materials and similar applications where an uncoated carbide edge yields low cutting forces and good surface finish. How is the insert secured in the toolholder? This triangular insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping in ISO‑compliant holders, ensuring correct seating and repeatable positioning. What advantages does the TH10 grade offer compared with coated grades? The TH10 uncoated carbide grade provides a sharper cutting edge that can reduce built‑up edge and improve surface quality on softer materials, making it suitable when low cutting forces and neat chip formation are priorities. Is the insert compatible with standard ISO turning holders? Yes. The insert’s ISO designation (080200) and triangular 08 form are intended for use with compatible ISO indexable turning holders that accept the specified size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080200 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp uncoated carbide grade for low cutting forces, and a compact triangular geometry for productive external and internal turning; order directly via Metav Werkzeuge or consult the team for holder matching and process advice. TCGT080200 TH10 Tungaloy turning insert — ISO triangular insert for turning, 60° pitch TCGT080200 TH10 is an ISO‑standard triangular indexable turning insert for external and internal turning applications, designed for efficient machining of non‑ferrous materials and processes that benefit from a sharp, uncoated cutting edge. ISO‑standard triangular insert Sharp uncoated carbide TH10 7° clearance for low cutting forces Cylindrical hole with 40°–60° countersink Stable machining with ISO compatibility and clear setup advantages The insert belongs to an ISO series of indexable turning plates and is specified for turning operations where repeatable seating and secure clamping are essential. Compatibility with a toolholder or boring bar is determined by form, 7° relief angle, tolerance class, fastening method, size 08 and a thickness of 2.38 mm; matching these parameters ensures correct chip flow and tool life. The triangular geometry with a 60° point angle provides three usable cutting edges per insert, supporting efficient tool utilisation and predictable replacement intervals. For process planning, the insert’s ISO designation speeds up holder selection and stock management. Lower cutting forces and improved surface finish for non‑ferrous workpieces The uncoated carbide composition and the TH10 sharp universal grade are optimised for materials where low cutting forces and clean surfaces matter. An uncoated cutting edge reduces build‑up edge formation on aluminium and similar alloys and often achieves a finer finish at moderate cutting speeds than coated alternatives; this is beneficial in applications such as light alloy turning or when minimal workpiece distortion is required. The single‑sided chipbreaker promotes controlled chip formation, reducing recutting and helping to maintain consistent surface quality over the component length. Practical set‑up, clamping reliability and suggested applications Assembly is simple when the holder geometry and insert dimensions correspond: a suitable external holder or boring bar, the correct clamp or pad, and replacement screws make up the system. The insert is supplied with a cylindrical centre hole and a single‑side countersink (40°–60°) that secures the plate and enables precise seating under axial and radial loads. Recommended uses include both external and internal turning operations on non‑ferrous metals and soft alloys; the combination of one‑sided chipbreaker, compact thickness and triangular form supports productive machining in workshops where process stability and repeatable seating are priorities. For precision turning with Tungaloy quality, contact Metav Werkzeuge for tailored holder recommendations and order support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6807619 Manufacturer SKU: TUN6807619 SKU: 6807619-Tungaloy Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten WPL designation: TCGT080200 TH10 Tungaloy‑Wendeplatte Core dimensions Insert geometry: triangular, 60° Relief / clearance angle: 7° Thickness: 2.38 mm Size: 08 ISO code: 080200 Centre hole: with hole Countersink angle: 40°–60° Special features Material: uncoated carbide Grade: TH10 (sharp universal for non‑ferrous) Chipbreaker: one‑sided Shape: triangular, three cutting edges Suitable for: external and internal turning System: ISO insert, compatible with matching holders and pads FAQ What materials is this insert best suited for? The TCGT080200 TH10 insert is specified for non‑ferrous materials and applications where an uncoated, sharp carbide edge reduces cutting forces and improves surface finish. How is the insert secured in the holder? The insert features a cylindrical centre hole with a single‑side countersink (40°–60°) to ensure reliable clamping and repeatable seating in ISO‑compatible holders and boring bars. What does the TH10 grade mean for machining performance? TH10 denotes a sharp universal carbide grade optimised for low cutting forces and clean surfaces, particularly effective on aluminium and similar alloys. How many cutting edges are available per insert? The triangular geometry with a 60° pitch provides three usable cutting edges per insert, supporting economical edge rotation. Is a coated version available for harder materials? This listing refers to an uncoated carbide insert; for higher‑temperature or abrasive applications a coated grade may be more appropriate and can be recommended by Metav Werkzeuge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 080201 J740 Wendeplatten - Tungaloy
Take advantage of the J740 grade and ISO compatibility to combine dependable wear resistance, cutting-edge stability and straightforward holder compatibility for reliable turning cycles; order the TCGT080201 J740 insert directly via Metav Werkzeuge or ask the consultants for tailored support. TCGT 080201 J740 indexable insert for turning — Tungaloy, triangular 60° TCGT 080201 J740 is an ISO‑standard triangular indexable insert designed for external and internal turning applications, offering a balance of wear resistance and cutting edge stability in a compact 60° geometry. ISO‑standard triangular insert 60° J740 Tungaloy cemented carbide grade 0.1 mm corner radius for precise profiling Cylindrical hole with 40°–60° countersink Consistent geometry for predictable cutting performance The triangular 60° geometry and ISO conformity ensure predictable repositioning and repeatable cutting angles when inserts are indexed or replaced. Compatibility with a chosen toolholder depends on form, relief angle, tolerance class, fixation method, size and thickness; this makes the insert suitable for standardised tool systems and facilitates fast changeovers. The combination of a defined corner radius and proven insert form reduces process variation and supports steady production cycles. Durable grade engineered for stable tool life The J740 cemented carbide grade is formulated to balance wear resistance and toughness, delivering a stable cutting edge under typical turning loads. By pairing this grade with the appropriate one‑sided chipbreaker, the system offers improved chip control and reduced edge chipping, which translates into longer intervals between indexings and less unscheduled downtime. The result is a measureable increase in machining reliability and consistent surface quality. Practical dimensions and secure clamping for repeatability With a thickness of 2.38 mm, an insert size 08 and a small 0.1 mm radius, the component enables fine profiling and controlled material removal in finishing and medium cutting operations. The 7° relief angle supports a low cutting force entry while the cylindrical hole with single‑side countersink (40°–60°) ensures secure clamping and correct seating in compatible clamping sets. Made from cemented carbide, the insert integrates into the ISO turning insert system alongside holders, clamps and replacement screws, promoting quick, repeatable tool setups. For selection advice regarding holder compatibility or chipbreaker choice, Metav Werkzeuge can provide application‑specific recommendations. Contact Metav Werkzeuge for original Tungaloy J740 inserts and expert setup advice to secure productive turning results Technical Data Article number: 6807620 Manufacturer SKU: TUN6807620 SKU: 6807620-Tungaloy Model series: ISO turning indexable inserts Name: TCGT080201 J740 Tungaloy indexable insert Facts Thickness: 2.38 mm Corner radius: 0.1 mm Relief angle: 7° Insert size: 08 Cutting angle: 60° Special features Triangular insert form Cylindrical hole with single‑side countersink (40°–60°) One‑sided chipbreaker Cemented carbide material Grade: J740 (Tungaloy) Application: Turning Compatibility determined by form, relief angle, tolerance class, fixation, size and thickness FAQ What holders are compatible with this insert? The TCGT 080201 J740 insert is compatible with holders designed for ISO triangular inserts size 08 where form, relief angle, tolerance class, fixation, size and thickness match the toolholder specification. Which materials can this insert machine effectively? The J740 cemented carbide grade on the TCGT 080201 is intended for a broad range of turning tasks; select the one‑sided chipbreaker and machining parameters according to the workpiece material and stability requirements. What benefits does the J740 grade provide for turning? The J740 grade delivers a balance of wear resistance and toughness for stable cutting edge behaviour, helping to extend effective tool life and maintain consistent surface finish in turning operations. How does the cylindrical hole with countersink affect clamping? The cylindrical hole combined with a single‑side countersink (40°–60°) on the TCGT 080201 enables reliable seating and axial location in standard clamping sets, improving repeatability and reducing the risk of insert displacement. Is the small corner radius suitable for profiling operations? Yes, the 0.1 mm corner radius is designed for fine profiling and finishing passes where a precise edge form and reduced cutting forces are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080201 J740 Wendeplatten - Tungaloy
Take advantage of a precise, ISO‑standard triangular indexable insert that combines the J740 carbide grade with a 0.1 mm corner radius for stable cutting and fine surface finish; order directly via Metav Werkzeuge or consult our advisers for application-specific selection. TCGT 080201 J740 triangular indexable turning insert, 7° relief by Tungaloy The TCGT080201 J740 is an ISO‑standard triangular indexable insert designed for external and internal turning operations, offering a balance of wear resistance and edge stability for a wide range of turning tasks. ISO‑standard triangular insert J740 carbide grade, wear‑resistant 0.1 mm corner radius for fine finishing 7° relief angle, cylindrical hole with countersink Consistent turning quality through defined geometry and grade The triangular indexable insert features an ISO designation that ensures repeatable seating and secure clamping in compatible holders, reducing setup variation and downtime. Combined with the J740 carbide grade, the geometry provides a controlled balance of wear resistance and toughness, which helps maintain a stable cutting edge over longer tool life. This results in predictable component tolerances and fewer interruptions for insert changes. Secure mounting and dimensional clarity for reliable clamping Designed with a cylindrical hole and one‑sided countersink (40°–60°) and a 2.38 mm plate thickness, the insert offers clear mechanical engagement with standard ISO holders and clamping sets. The defined 7° relief angle reduces rubbing at the flank while the precise dimensions of the ISO form support consistent seating; both factors improve vibration resistance and toolholder security during medium‑ to high‑stability turning operations. Application advantages from chip control and corner radius Equipped with a one‑sided chipbreaker and a 0.1 mm corner radius, this insert supports fine finishing passes and controlled chip formation during finishing and light semi‑finishing cuts. The single‑side chipbreaker directs swarf away from the workpiece, aiding process stability and surface quality. The modest corner radius minimises edge strength compromise while enabling tight radii on workpiece features where required. Material compatibility and selection guidance for productive turning Intended for general turning tasks, the insert’s carbide composition and the J740 performance characteristics make it suitable for a broad range of materials when matched with the correct chipbreaker and machining parameters. Select feed rates and cutting speeds appropriate to the workpiece material and toolholder rigidity; the insert’s balanced properties favour applications where consistent cutting edge behaviour and predictable tool life are priorities. For application advice or to discuss how the Tungaloy J740 inserts can improve production reliability, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 — our technical advisers are available to recommend the optimal insert and holder combination for specific turning tasks. Technical data Article number: 6807623 Manufacturer SKU: TUN6807623 Model series: ISO‑turning indexable inserts Material: carbide ISO designation: TCGT080201 Facts Size: 08 Shape: triangular Thickness: 2.38 mm Relief angle: 7° Corner radius: 0.1 mm Special features Coating / grade: J740 (Tungaloy carbide grade) Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: one‑sided Application: turning FAQ What operations is this insert suitable for? The TCGT080201 J740 insert is suitable for external and internal turning operations, offering good edge stability for finishing and light semi‑finishing passes. How does the J740 grade affect tool life? The J740 carbide grade used in this insert balances wear resistance and toughness, which helps maintain a consistent cutting edge and can extend operational life under appropriate cutting conditions. Can this insert be used in standard ISO holders? Yes, the ISO designation and defined thickness ensure compatibility with ISO‑standard turning holders and clamping systems when matched for form, size and tolerance. What does the 0.1 mm corner radius mean for surface finish? A 0.1 mm corner radius provides a finer cutting edge profile, supporting improved surface finish on finishing passes while maintaining sufficient edge strength for general turning. Is the insert suitable for heavy roughing cuts? The design and modest corner radius of this insert are optimised for finishing and light semi‑finishing; for heavy roughing, a different geometry or a grade designed for high toughness is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 080201 SH7025 Wendeplatten - Tungaloy
Take advantage of the SH7025 coated carbide grade for a stable cutting edge, the 60° triangular geometry for versatile turning, and a 0.1 mm corner radius for precise finishing; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility. TCGT 080201 SH7025 Tungaloy indexable turning insert for turning The TCGT080201 SH7025 is an ISO-standard triangular indexable insert designed for external and internal turning, offering a robust cutting-edge grade for variable engagement conditions. ISO triangular insert, size 08 Coated carbide grade SH7025 0.1 mm corner radius for fine turning Cylindrical hole with countersink 40°–60° Consistent cutting performance through a tough, coated grade The SH7025 grade is a coated carbide designed for turning where edge stability under changing engagement is required. Its formulation emphasises a durable cutting edge that resists microchipping, which translates directly into longer tool life and fewer indexings during production runs. With a 0.1 mm corner radius the insert provides a compromise between edge strength and the ability to produce fine surface finishes; this small radius is particularly effective when machining components with tight tolerances or when using smaller toolholders. The result is reliable dimensional control and reduced secondary operations. Engineered geometry and standardised fit for easy toolholder integration Compatibility with toolholders follows ISO conventions and depends on geometry, clearance angle and size. The insert features a 60° triangle geometry and a clearance angle of 7°, which suit a broad range of ISO toolholders and turning applications. Plate thickness of 2.38 mm and the size designation 08 allow straightforward selection of matching external holders or boring bars. The central cylindrical hole with one-side countersink (40°–60°) ensures secure clamping and repeatable seating, simplifying index changes and maintaining concentricity. These standardised dimensions reduce set-up time and support consistent process repeatability. Practical advantages: chip control, versatility and application guidance This insert is manufactured with a single-sided chipbreaker and a coated substrate to promote predictable chip formation and evacuation during continuous turning. The combination of a robust grade and a dedicated chipbreaker makes it suitable for varying cutting conditions and for operations where intermittent cut depths or small overhangs occur. For best results, match the chipbreaker and SH7025 grade to the workpiece material and the stability of the machining set-up; this approach optimises tool life and surface quality while balancing cutting parameters and productivity. The insert is a practical choice for shops aiming for efficient, repeatable turning processes. Contact Metav Werkzeuge for a tailored recommendation on holder selection and cutting data for the TCGT080201 SH7025 insert; reach us at info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and fast supply from Metav Werkzeuge Technical data Article number: 6967533 Manufacturer SKU: TUN6967533 Vendor SKU: 6967533-Tungaloy Model series: ISO indexable turning inserts Facts Geometry: 60° Corner radius: 0.1 mm Thickness: 2.38 mm Size: 08 Clearance angle: 7° ISO code: 080201 Special features Coated carbide cutting material Grade SH7025 Triangular insert, three cutting edges Single-sided chipbreaker Cylindrical hole with one-side countersink (40°–60°) Suitable for external and internal turning Compatibility determined by form, clearance angle, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The TCGT080201 SH7025 insert is a coated carbide grade engineered for general turning duties; its formulation provides edge stability across a range of workpiece materials when the chipbreaker and cutting data are matched to the specific application. How is holder compatibility ensured? Compatibility depends on standard ISO features: the insert’s 60° geometry, 7° clearance, size 08 and 2.38 mm thickness determine which toolholders fit; using these dimensions ensures correct seating and clamping of the TCGT080201 SH7025 insert. Which advantages does the SH7025 grade offer? The SH7025 grade delivers improved cutting-edge stability and wear resistance due to its coating and carbide substrate, reducing the frequency of indexing and supporting consistent surface quality in turning operations. Is this insert suitable for internal turning and small-tool applications? Yes. The triangular geometry with a 0.1 mm corner radius and the grade characteristics make the insert well suited to both external and internal turning and particularly effective when smaller tools or variable engagement conditions are present. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com