TCGT 080201 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 cutting grade, precise 60° triangular geometry and reliable chip control for stable, economical turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TCGT 080201 SH725 indexable turning insert — Tungaloy, 60° triangular, 0.1 mm radius The TCGT080201 SH725 is an ISO-compatible triangular indexable insert designed for external and internal turning, offering a robust cutting grade and precise geometry for consistent chip control. Triangular ISO insert, 60° geometry Coated cemented carbide, SH725 grade One-sided chipbreaker for versatile turning Cylindrical hole with single-sided countersink Boosted productivity with a resilient cutting grade The coated cemented carbide SH725 is formulated for stable cutting edges and reliable performance under varying engagement conditions, making it particularly effective in small-tool setups and interrupted cuts. This material combination reduces tool changes and supports longer tool life, which improves throughput and lowers machining costs per component. The result is measurable productivity gains and fewer unplanned stoppages. Clear compatibility reduces setup time Being part of the ISO-series means the insert fits standard triangular holders when the form, relief angle, tolerance class, fixation, size and thickness match. The declared 7° relief angle and standard size ensure predictable seating and clamping in compatible external holders or boring bars. When the insert geometry and holder match, set-up is faster, runout is reduced and process repeatability improves — an immediate advantage for batch production and mixed-series machining. Precise geometry for consistent surface quality The 60° cutting geometry combined with a 0.1 mm corner radius delivers a balance between strength and edge definition for turning operations. The single-sided chipbreaker supports controlled chip formation and evacuation, aiding surface finish and tool life. The cylindrical hole with single-sided countersink (40°–60°) provides secure fastening and stable seat orientation, which helps maintain a constant cutting position for repeatable results on external and internal contours. For application-specific advice on the Tungaloy SH725 inserts and current stock, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, technical guidance and availability Technical data Article number: 6737027 Manufacturer SKU: TUN6737027 SKU: 6737027-Tungaloy Designation: TCGT080201 SH725 Facts Size designation: 08 Thickness: 2.38 mm Corner radius: 0.1 mm Insert angle: 60° Relief angle: 7° Hole: with hole; cylindrical + single-sided countersink (40°–60°) Special features Coated cemented carbide (SH725) Triangular insert form Single-sided chipbreaker ISO-standard indexable turning plate Application: turning (external and internal) FAQ What materials is this insert suited for? The TCGT080201 SH725 indexable insert from Tungaloy is optimised for a wide range of turning tasks where the SH725 grade offers stable edge life; selection of the exact workpiece material should match the grade characteristics for best results. How does the chipbreaker influence machining? A single-sided chipbreaker on this triangular insert promotes controlled chip formation and evacuation during turning, which improves surface finish and reduces the risk of built-up edge on the cutting edge. How is compatibility with holders ensured? Compatibility is determined by matching the insert form, relief angle, tolerance class, fixation, size and thickness; the ISO designation simplifies selection for compatible triangular holders and boring bars. Which cutting tasks benefit most from the 0.1 mm corner radius? A 0.1 mm corner radius provides a compromise between edge robustness and detail fidelity, making it suitable for finishing passes and light to medium roughing where a fine profile or close tolerances are required. How can the insert be identified on receipt? The insert is supplied as TCGT080201 SH725 (Tungaloy) and is referenced under SKU 6737027-Tungaloy for clear identification during inventory and tool management. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080201 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 coated carbide, 60° triangular geometry and a 0.1 mm corner radius to achieve stable cutting, reliable chip control and consistent surface finish in turning operations — order the insert directly via Metav Werkzeuge or consult the team for tailored advice. TCGT 080201 SH725 Tungaloy indexable insert for turning (triangular, 60°) The TCGT080201 SH725 Tungaloy indexable insert is an ISO-standard triangular turning insert designed for external and internal turning, offering a robust cutting edge for variable engagement conditions. SH725 coated carbide grade for tough cutting 60° triangular geometry for stable cutting 0.1 mm corner radius for fine turning Cylindrical hole with one-sided countersink High process reliability for mixed turning tasks The SH725 grade is a coated carbide formulation developed to deliver a stable cutting edge and predictable wear behaviour in demanding turning applications. As a coated indexable insert, it offers a balance between toughness and wear resistance that is particularly beneficial for small tools or operations with fluctuating engagement. This combination reduces the risk of chipping under variable loads and preserves cutting-edge integrity, which in turn supports consistent machining quality and longer in‑service life of tooling systems. Precision geometry that improves surface finish and control The triangular 60° geometry together with a 0.1 mm corner radius and a 2.38 mm plate thickness provides a controlled cutting point and even force distribution during machining. The modest corner radius is suitable for producing fine finishes while still allowing for light form work where sharper corners are required. The specified 7° relief angle reduces rubbing on the flank face and helps maintain a clean contact zone; this geometry combination translates directly into fewer rework passes and improved dimensional consistency on turned parts. Secure clamping and optimised chip control Designed with a cylindrical hole and a one‑sided countersink (40°–60°), the insert ensures reliable seating and straightforward clamping using standard screw systems. The one-sided chipbreaker is tailored to the grade and typical turning tasks, promoting consistent chip formation and evacuation, which is crucial when machining components that demand repeatable cycle times. Compatibility with a clamping system is determined by holder form, relief angle, tolerance class, fastening method, size and thickness — matching these parameters ensures safe clamping and optimal cutting dynamics. Application-focused advice for extended tool life Intended for general turning, the insert performs well in both external and internal operations when paired with a suitable holder and cutting parameters. The coating improves wear resistance and helps maintain edge stability across a range of materials and cutting conditions; selecting the appropriate chipbreaker and feed strategy will further enhance stable chip formation and surface quality. For production environments where process reliability and predictable tool changes matter, this insert offers a pragmatic balance of performance and economy. For demanding turning routines, choose the Tungaloy SH725 grade and contact Metav Werkzeuge for stock information or machining recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best holder match and cutting data for specific materials Technical data Article number: 6737023 Manufacturer SKU: TUN6737023 SKU: 6737023-Tungaloy Label: TCGT080201 SH725 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.1 mm Included angle: 60° Relief angle: 7° Thickness: 2.38 mm Size: 08 Special features Coating: SH725 Material: coated carbide Chipbreaker: one-sided Mounting: cylindrical hole with one-sided countersink (40°–60°) Plate shape: triangular Application: turning (external and internal) FAQ What materials can this insert machine effectively? The TCGT080201 SH725 Tungaloy indexable insert is a versatile coated carbide grade suited to a wide range of turning tasks; the SH725 coating enhances wear resistance and stable cutting on commonly machined steels and mixed-material applications. How is the insert clamped in the holder? Clamping is achieved via the central cylindrical hole combined with a single-sided countersink (40°–60°), ensuring secure seating and repeatable positioning when used with matching screws and supports. Which chipbreaker should be chosen for heavy cuts? For heavier or interrupted cuts, pair the insert with the matching robust chipbreaker style and a suitable grade selection; the single-sided chipbreaker on this insert is optimised for controlled chip flow under typical turning loads. Is this insert suitable for internal turning? Yes, the triangular 60° geometry and compact radius make the insert appropriate for both external and internal turning when mounted in a compatible boring bar or internal holder. How to ensure compatibility with an existing toolholder? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; verify these parameters against the insert dimensions (60° triangle, 2.38 mm thickness, size 08) before mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080201 TH10 Wendeplatten - Tungaloy
Efficient turning performance with a sharp, uncoated carbide grade and a precise 0.1 mm corner radius ensures low cutting forces and clean surface finishes; order genuine inserts or consult Metav Werkzeuge for application advice. TCGT 080201 TH10 triangular turning insert — Tungaloy, uncoated carbide, 7° clearance TCGT 080201 TH10 is an ISO-standard indexable insert for external and internal turning, optimised for non-ferrous materials and applications requiring low cutting forces and fine surface quality Sharp uncoated carbide cutting edge Triangular insert with 7° clearance angle Cylindrical hole plus 40°–60° countersink 0.1 mm corner radius for clean surface finish Low cutting forces and improved surface quality for non‑ferrous turning The combination of an uncoated carbide grade and a sharp geometry reduces friction and results in consistently low cutting forces. This leads to smoother feeds and helps to achieve a clean surface finish when machining aluminium, Messing and other non‑ferrous materials. The selected grade TH10 is a universal, sharp grade designed to support applications where a non‑coated cutting edge is advantageous; this choice reduces built‑up edge formation and makes chip evacuation more predictable. For less experienced purchasers: an uncoated tip often requires less cutting power at comparable settings, which can reduce spindle load and improve cycle stability. Compatibility and easy integration with ISO holders The insert follows ISO designation 080201, so compatibility with a suitable external holder is determined by shape, clearance angle, tolerance class, fastening method, size and thickness. The triangular shape with a 60° included angle and a 7° clearance ensures stable seating in standard ISO turning toolholders. The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°), which fits common clamping screws and plates; correct matching of the holder and clamping set ensures repeatable positioning and tool life, particularly important in batch or automated production. Predictable chip control and operational reliability A one‑sided chipbreaker supports consistent chip formation on the intended side, improving chip guidance in many turning cycles. Combined with the TH10 grade, this geometry is suited to operations where controlled chips and clean surfaces are priorities. The uncoated carbide substrate provides mechanical stability at the cutting edge, and when paired with the correct feed and speed, the result is a productive cutting process with reduced risk of edge deformation. Choosing the appropriate chipbreaker and adjusting cutting parameters according to workpiece material optimises productivity and reduces downtime for insert changes. Practical specifications and selection advice for purchasing Key measurable attributes include a corner radius of 0.1 mm, a plate thickness of 2.38 mm and an insert size of 08 with a 60° included angle — details that determine the achievable surface finish and depth‑of‑cut limits. The insert is intended for turning (external and internal) and should be matched to the workpiece material and machining stability: lighter, sharp grades like TH10 suit lower cutting forces and fine finishing, whereas tougher coated grades (not applicable here) would be selected for interrupted cuts or harder materials. When replacing inserts, check the holder geometry, torque settings for the clamping screw and the tolerance class to maintain positioning accuracy and dimensional repeatability. For tailored application advice or to secure genuine Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for rapid supply and technical guidance Technical data Article number: 6807625 SKU: 6807625-Tungaloy Manufacturer SKU: TUN6807625 Designation: TCGT080201 TH10 Facts Clearance angle: 7° Included angle: 60° Thickness: 2.38 mm Corner radius: 0.1 mm Size: 08 Special features Material: Hartmetall (uncoated carbide) Coating: none Hole: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: one‑sided Shape: triangular Application: Turning; external and internal turning; suitable for non‑ferrous materials FAQ Which holder types are compatible with this insert? Compatibility depends on holder form, clamping method and tolerance class; the triangular geometry and cylindrical hole with countersink of the TCGT 080201 TH10 insert fit standard ISO triangular external holders and corresponding drill‑stem toolholders when the holder matches ISO 080201 dimensions. Is this insert suitable for aluminium and Messing? Yes, the TH10 uncoated carbide grade is designed as a sharp universal grade for non‑ferrous materials and supports low cutting forces and clean surface finishes on aluminium and Messing. What is the recommended application for the chipbreaker? The one‑sided chipbreaker is intended to produce controlled chips in continuous turning operations; use it where guided chip flow and improved surface quality are required, adjusting feeds accordingly for the material and depth of cut. Can the insert be used for internal turning? The insert is suitable for both external and internal turning when mounted in an appropriate ISO‑compatible boring bar or holder that accepts triangular inserts with the specified thickness and hole style. What are the product identifiers for ordering? Order as TCGT080201 TH10 (Tungaloy) — Manufacturer article number 6807625, SKU 6807625-Tungaloy, manufacturer SKU TUN6807625. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080201 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated carbide grade combined with ISO compatibility and predictable chip control for efficient turning operations. The combination of a low cutting-force grade, precise 0.1 mm corner radius and secure hole mounting supports consistent surface quality and repeatable indexing; order directly via Metav Werkzeuge or contact their consultants for tailored recommendations. TCGT 080201 TH10 – Tungaloy triangular turning insert for turning applications The TCGT080201 TH10 is an ISO triangular indexable insert designed for external and internal turning, offering a sharp uncoated carbide grade and a 60° cutting geometry for reduced cutting forces and improved surface finish ISO triangular 60° geometry Sharp uncoated carbide grade TH10 0.1 mm corner radius for fine finishes Cylindrical hole with 40°–60° countersink Reduced cutting forces for higher productivity The combination of the TH10 cutting grade and an uncoated carbide substrate delivers notably low cutting forces, which in practice reduces spindle load and vibration during machining. This leads to more consistent cycle times and a higher probability of achieving the intended tolerances on workpieces made from non-ferrous and easy-to-cut materials. The sharp edge geometry supports a clean surface without the need for excessive feed reductions, allowing effective roughing-to-finishing transitions on the lathe. Selecting a matching chipbreaker and holder stability will further enhance process efficiency. Secure fit and repeatable positioning in ISO holders Designed to the ISO series of indexable inserts, the item features a 60° geometry and a standard triangular size that ensures compatibility with a wide range of external holders and boring bars. The 7° clearance and the cylindrical hole with a single-sided countersink (40°–60°) provide reliable clamping and repeatable indexing when changing positions on the toolpost. As a result, the insert enables predictable set-up and swift tool changes, reducing downtime and supporting stable batch production. Predictable chip control and consistent tool life A single-sided chipbreaker is integrated to improve chip control for typical turning operations, guiding swarf away from the cutting zone and reducing the risk of surface damage. The 0.1 mm corner radius combined with a 2.38 mm plate thickness yields a balanced edge strength for small radii finishing and light profiling tasks. With the correct holder geometry and cutting parameters, the combination of chipbreaker design and grade delivers steady wear behaviour, making process planning and tool-change intervals more reliable. Practical applications and handling advice Intended primarily for external and internal turning, the insert performs well where low cutting forces and good surface quality are required, particularly on non-ferrous materials or components that benefit from a sharp, uncoated edge. Installation should follow ISO clamping guidelines: match form, free angle, tolerance class, fastening and thickness to the chosen holder; the system includes the insert, appropriate outer holder or boring bar, and securing hardware. For tailored feed and speed recommendations, consult technical documentation or a machining specialist to align tool life and productivity goals. Contact Metav Werkzeuge for a cutting-optimised recommendation or to request batch availability; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6807622 SKU manufacturer: TUN6807622 SKU: 6807622-Tungaloy Manufacturer article number: 6807622 Model series: ISO-Drehwendeschneidplatten Application: Turning Material: Hartmetall Facts Thickness: 2.38 mm Corner radius: 0.1 mm Clearance angle: 7° Cutting geometry angle: 60° Size: 08 Special features ISO designation: TCGT080201 Grade: TH10 (uncoated) Plate shape: triangular Chipbreaker: single-sided Hole: cylindrical hole with single-sided countersink (40°–60°) Compatibility: ISO indexable insert system FAQ What materials is this insert suitable for? The TH10 grade on the TCGT080201 insert is formulated as a sharp, uncoated carbide suitable for non-ferrous materials and applications where a low cutting force and clean surface are required. How does the 0.1 mm corner radius affect surface finish? A 0.1 mm corner radius produces fine surface results with reduced cutting forces; the small radius is ideal for light profiling and finishing operations using the Tungaloy insert. Which toolholders are compatible with this insert? Compatibility depends on form, free angle, tolerance class, fastening method, size and thickness; the ISO TCGT format fits standard triangular ISO turning holders when those parameters match. How does the single-sided chipbreaker improve machining? The single-sided chipbreaker on this insert guides chips away from the cutting zone, improving chip control and reducing the likelihood of surface interference during turning cycles. Is the insert indexable and easy to replace? Yes, the triangular ISO format allows multiple index positions; secure clamping via the cylindrical hole and countersink ensures repeatable indexing and straightforward replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080202 J740 Wendeplatten - Tungaloy
Take advantage of the combination of durable carbide construction, J740 wear resistance, and precise geometry for consistent turning results. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. TCGT 080202 J740 indexable turning insert for turning – Tungaloy A TCGT 080202 J740 indexable turning insert engineered for ISO-compliant external and internal turning applications with a triangular footprint and secure mounting ISO-compliant triangular insert size 08 J740 grade for wear resistance 7° clearance angle for secure cutting Cylindrical hole with single-side countersink Reliable cutting performance and extended tool life The combination of a carbide substrate and the J740 grade delivers a stable balance of wear resistance and edge toughness. This results in consistent cutting performance across medium-duty turning tasks, reducing unexpected tool changes and supporting predictable cycle times. The material and grade selection is intended to withstand variable contact stresses while retaining edge geometry, which helps to maintain dimensional accuracy over repeated indexings. Secure clamping and machine compatibility for predictable results The insert follows ISO indexing conventions, so compatibility with holders is defined by form, clearance angle, tolerance class, fastening, size and thickness. The 7° clearance angle and the cylindrical hole with a single-sided countersink (40°–60°) allow secure fixation in a matched outer holder or boring bar. With a plate thickness of 2.38 mm and an ISO 08 size, the component integrates into common tool systems to provide repeatable seating and torque transmission during turning operations. Controlled chip formation and surface quality A dedicated one-sided chipbreaker supports efficient chip control and evacuation when paired with appropriate cutting parameters. The small corner radius of 0.2 mm enables fine radiused profiles and contributes to improved surface finish on turned parts. Choosing the matching chipbreaker geometry and the J740 grade helps to balance chip form, reduce built-up edge risk and deliver consistent part quality for both external and internal turning tasks. Practical system setup and intended applications This indexable triangle insert is intended for turning; typical system components include the ISO insert, a matched external holder or boring bar, a support/clamp set and replacement screws. Selection of the exact chipbreaker and grade should match the workpiece material, the intended machining method and the available process stability. The insert suits workshops and CNC departments seeking a robust, ISO-compliant cutting edge for a wide range of routine turning operations. For tailored application advice or availability of Tungaloy J740 inserts, contact Metav Werkzeuge for guidance and local stock information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6807631 Manufacturer SKU: TUN6807631 Label: TCGT080202 J740 Tungaloy insert Facts Corner radius: 0.2 mm Thickness: 2.38 mm Clearance angle: 7° Included angle: 60° Size: 08 Special features Shape: triangular Hole: cylindrical hole with single-sided countersink (40°–60°) Grade: J740 (Tungaloy) Material: carbide Chipbreaker: one-sided Series: ISO indexable turning inserts Application: turning FAQ What materials is this insert intended for? The Tungaloy TCGT 080202 J740 insert is designed for general turning applications; the correct chipbreaker and cutting data should be chosen to match the specific workpiece material and machining conditions. How is the insert secured in the toolholder? The insert uses a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping in compatible ISO holders or boring bars, combined with the 7° clearance for correct seating. What surface finish can be expected with a 0.2 mm corner radius? A 0.2 mm corner radius supports fine profile radiusing and improved surface finish when combined with appropriate feeds and speeds and the matching J740 grade. Can this insert be used for both external and internal turning? Yes, the triangular ISO form and the chipbreaker design make it suitable for both external and internal turning, provided the correct holder and process stability are in place. Which system components are required for a full tooling setup? A complete tooling system typically comprises the indexable insert, a matching outer holder or boring bar, a clamp/support set and replacement screws to ensure repeatable assembly and reliable cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080202 J740 Wendeplatten - Tungaloy
High productivity and dependable edge stability come from the Tungaloy J740 grade combined with a triangular geometry and a 0.2 mm corner radius; the ISO compatibility and 7° clearance angle ensure consistent fit and machining results. Order the TCGT080202 J740 insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT080202 J740 triangular turning insert for ISO turning applications — Tungaloy A robust, ISO-standard triangular indexable insert (TCGT080202 J740) engineered for external and internal turning with optimised wear resistance and stable cutting-edge performance. TCGT080202 J740 ISO triangular insert Tungaloy carbide grade J740 for wear resistance 7° clearance angle and 60° cutting geometry Cylindrical hole with 40°–60° countersink Consistent productivity through optimised grade and geometry The combination of an ISO-standard geometry and the Tungaloy J740 carbide composition provides a clear production advantage: enhanced wear resistance with retained edge toughness. This insert is designed to sustain cutting forces during both roughing and finishing passes, which supports stable cycle times and reduces unplanned tool changes. For workshops seeking predictable performance, the hardened substrate and coating strategy of this grade translate into measurable increases in component throughput and reduced scrap rates. Secure clamping and repeatable precision for every toolholder Compatibility is determined by form, clearance angle, tolerance class, attachment method, size and thickness; with a 7° clearance and a 60° cutting geometry, the insert seats securely in standard holders. The cylindrical hole with a one-sided countersink (40°–60°) allows precise screw clamping and consistent axial location, while the triangle shape affords up to three renewed cutting edges per index. The 0.2 mm corner radius improves surface finish on contours and aids in chip formation control at moderate feeds, helping to achieve repeatable part tolerances. Better chip control and broader application flexibility A single-sided chipbreaker combined with the J740 grade provides controlled chip evacuation for a wide range of turning tasks. This geometry is suitable for external and internal turning of diverse materials when the correct chipbreaker and grade are selected according to workpiece stability and cutting conditions. Integrating the insert into a standard system—indexable insert, suitable holder or boring bar, shim/clamping set and replacement screws—enables quick setup changes and shorter downtime. The result is consistent surface finish and longer tool life, which supports operational efficiency in production shops and jobbing environments alike. Contact Metav Werkzeuge today to confirm holder compatibility and stock availability for the Tungaloy TCGT080202 J740 insert and to receive application-specific recommendations. Technical data Article number: 6807628 Manufacturer SKU: TUN6807628 Stock SKU: 6807628-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TCGT080202 Facts Insert size: 08 Thickness: 2.38 mm Cutting angle: 60° Clearance angle: 7° Corner radius: 0.2 mm Special features Grade: J740 (Tungaloy) Material: Carbide Geometry: triangular insert Chipbreaker: single-sided Hole: cylindrical with one-sided countersink (40°–60°) Application: external and internal turning FAQ What holders are compatible with this insert? The TCGT080202 J740 insert fits ISO-compatible triangular pockets; compatibility depends on form, clearance angle, tolerance class and attachment method—verify the holder accepts a triangle 08 insert with 2.38 mm thickness. Which materials is the grade J740 suited for? Tungaloy’s J740 grade is formulated for general turning applications where wear resistance and edge stability are required; it performs well across a broad material range when paired with the appropriate chipbreaker and cutting data. How many cutting edges are available per insert? The triangular geometry provides three usable cutting edges per indexable insert; rotating to a fresh edge restores original geometry and cutting performance. What benefits does the 0.2 mm corner radius provide? A 0.2 mm corner radius smooths contact with the workpiece, improving surface finish and reducing stress concentrations at the cutting edge during finishing passes. Is the insert supplied with clamping hardware? The insert is an ISO-standard indexable cutting insert; the typical system includes the insert itself plus compatible holder, shim/clamping set and replacement screws, which should be sourced to match the holder specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080202 SH7025 Wendeplatten - Tungaloy
Benefit from a tough SH7025 grade, precise 0.2 mm corner radius and ISO compatibility for consistent turning results; order the TCGT080202 SH7025 directly via Metav Werkzeuge or ask our consultants if needed. TCGT 080202 SH7025 — Tungaloy turning indexable insert, triangular, 60° The TCGT 080202 SH7025 is an ISO‑standard triangular indexable insert engineered for external and internal turning, offering a 7° relief and a single‑sided chipbreaker for stable, repeatable cuts Coated cemented carbide SH7025 for edge stability Triangular 60° geometry, size 08 Single‑sided chipbreaker, with centred hole 0.2 mm corner radius, 2.38 mm thickness Consistent performance where small tools and variable engagements meet The SH7025 grade is a coated cemented carbide designed to combine toughness with reliable edge retention. For turning operations that involve shorter tools or fluctuating depths of cut, this grade reduces the risk of chipping and premature wear while maintaining surface quality. As an ISO‑standard insert, the component fits into conventional clamping systems when the holder matches the insert’s form, 7° relief, tolerance class, fastening and thickness. The result is fewer interruptions for tool changes and a more stable machining process, which translates into increased productivity on the shop floor and less downtime. Geometry and clamping that support fast, secure set‑up The triangular plate with a nominal 60° included angle provides three usable cutting corners per insert, while the corner radius 0.2 mm offers a balance between edge strength and fine surface finish. The insert is supplied with a cylindrical hole plus a one‑sided countersink (40°–60°) to ensure secure axial and radial positioning in compatible holders. The 2.38 mm thickness contributes to rigidity in the cutting zone and helps to maintain consistent chip control under varying cutting forces. These geometry and fixation features lower set‑up time and help to prevent movement under load, supporting repeatable part tolerances. Chip control and application flexibility explained The single‑sided chipbreaker integrated into the geometry helps to control chip formation for a broad range of turning tasks; it promotes short, manageable chip shapes at moderate feeds and assists evacuation when cutting interrupted surfaces. For internal or external turning this chip control lowers the risk of chip entanglement and improves tool life. The insert functions as part of a system—an insert, matched outer holder or boring bar, a shim/clamping set and replacement screws—which together ensure the mechanical stability necessary for consistent results even under variable engagement conditions. Practical compatibility and selection guidance for workshop use Compatibility of the insert within a tooling system is governed by form, 7° relief, tolerance class, fastening type, size and 2.38 mm thickness. When selecting a holder, ensure it accepts triangular indexable inserts size 08 and provides proper seating for the countersunk hole. For customers less familiar with insert geometry: the “size 08” indicates the nominal insert designation within the ISO series, while the relief angle affects how the insert clears the workpiece during turning. The system approach reduces trial‑and‑error and permits predictable tool performance across similar turning tasks. Choose Tungaloy’s SH7025 grade for dependable, low‑risk turning—contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6967537 SKU: 6967537-Tungaloy Manufacturer SKU: TUN6967537 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Facts Geometry/angle: 60° Corner radius: 0.2 mm Relief angle: 7° Thickness: 2.38 mm Size: 08 Special features Coated cemented carbide (SH7025) Single‑sided chipbreaker Cylindrical hole + one‑sided countersink (40°–60°) Triangular plate form System components: insert, outer holder/boring bar, shim/clamping set, replacement screws Compatibility criteria: form, relief angle, tolerance class, fastening, size, thickness Application: Turning (external and internal) FAQ What turning operations is this insert suitable for? The TCGT080202 SH7025 Tungaloy indexable insert is intended for both external and internal turning, offering stable cutting performance particularly with smaller tools or variable engagement conditions. What are the key geometric specifications of the insert? The insert features a 60° triangular geometry, 0.2 mm corner radius, 7° relief angle and a thickness of 2.38 mm; it is size 08 and supplied with a cylindrical hole plus a one‑sided countersink (40°–60°). How does the SH7025 grade influence machining behaviour? The SH7025 coated cemented carbide grade emphasises toughness and cutting‑edge stability, reducing chipping risk and supporting consistent performance in turning operations that encounter varying cutting forces. How should the insert be matched with a holder? Compatibility depends on matching form, relief angle, tolerance class, fastening, size and thickness. Use a holder or boring bar designed for triangular ISO inserts size 08 and that accommodates the countersunk hole for secure clamping. Which system components are required for correct assembly? Proper use of the insert requires a compatible outer holder or boring bar, a matching shim or clamping set and the correct replacement screws; these ensure correct seating and repeatable clamping force. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080202 SH7025 Wendeplatten - Tungaloy
Take advantage of a coated carbide grade that combines edge stability and adaptability for varying engagement conditions, plus ISO conformity for straightforward integration into standard tool systems. Order the insert directly via Metav Werkzeuge or consult the technical team for selection advice. TCGT080202 SH7025 — ISO turning indexable insert for turning, triangular 60° geometry, coated carbide by Tungaloy A TCGT080202 SH7025 triangular ISO turning insert designed for external and internal turning where a tough, edge-stable grade is required, especially in smaller tools or when engagement conditions vary Coated carbide for improved wear resistance Tough SH7025 grade with stable cutting edge 7° clearance for reliable chip control Triangular 60° insert, 0.2 mm corner radius Consistent cutting performance with economic advantage The ISO-design insert delivers a predictable balance between tool life and productivity. As an indexable turning plate, it provides repeatable seating and fast index changes that reduce downtime and maintain process stability. The SH7025 coated carbide composition is formulated for edge stability, which reduces flank wear under fluctuating engagement and helps to maintain dimensional accuracy over multiple indexings. Compatibility with standard holders is defined by shape, clearance, tolerance class, clamping method, size and thickness, enabling straightforward integration into established tool systems and contributing to a lower total cost of machining. Precision geometry for controlled finishing and chip formation Geometry and micro-parameters are central to surface quality and process reliability. The triangular 60° geometry combined with a 0.2 mm corner radius supports fine finishing passes and small-step roughing, while the 7° clearance reduces rubbing and helps preserve the cutting edge. The single-sided chipbreaker promotes controlled chip formation and evacuation in many turning situations, improving surface finish and reducing the risk of entanglement. These design choices translate directly into fewer reworks and more consistent part quality on both external and internal turning operations. Secure clamping and rigid plate design for stable results Integration into the tool system is straightforward: the insert is supplied with hole featuring a cylindrical bore and a one-sided countersink (40°–60°), ensuring positive clamping and repeatable seating in compatible holders or boring bars. The plate thickness of 2.38 mm contributes to rigidity during interrupted cuts and when using short overhangs, while the standardised ISO form allows the use of common underplates, clamp kits and replacement screws. For workshops aiming for predictable machining cycles, this mechanical stability is a decisive factor in maintaining cycle times and part tolerances. Versatile use in variable turning conditions Designed for turning applications where conditions can change—such as batch production with mixed geometries or toolpaths that alternate engagement—the insert’s combination of coated carbide toughness and ISO compatibility makes it suitable for a wide range of turning tasks. Selection of the appropriate chipbreaker and grade should be matched to the workpiece material and the required stability of the setup. The insert’s construction supports both small-tool installations and operations where repeated indexing is needed, offering a reliable compromise between performance and flexibility. Choose the SH7025 grade from Tungaloy for demanding and variable turning tasks — contact Metav Werkzeuge for tailored selection support and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6967536-Tungaloy Manufacturer item no.: 6967536 Manufacturer SKU: TUN6967536 Model series: ISO turning indexable inserts Material: carbide Key figures Insert angle: 60° Clearance angle: 7° Corner radius: 0.2 mm Plate thickness: 2.38 mm Plate size: 08 Manufacturer SKU: TUN6967536 Features Coating/grade: SH7025 Chipbreaker: single-sided Hole style: with hole — cylindrical hole + one-sided countersink (40°–60°) Geometry: triangular (TCGT) Application: turning (external and internal) FAQ What type of turning is this insert designed for? The TCGT080202 SH7025 insert is intended for both external and internal turning operations where a tough, edge-stable coated carbide grade is advantageous. Which materials are appropriate for this grade? The SH7025 grade is a tough, edge-stable coated carbide developed for turning; it is particularly effective where engagement conditions vary or where smaller tools are used, offering good resistance to edge chipping. How does the hole and countersink benefit clamping? The cylindrical hole with a one-sided countersink (40°–60°) provides positive, repeatable clamping in compatible holders, improving seating accuracy and minimising movement during interrupted cuts. How should the chipbreaker be matched to an application? Selection of the single-sided chipbreaker should be based on the workpiece material, the required surface finish and the stability of the machining setup; the chipbreaker promotes consistent chip formation for many turning scenarios. Can the insert be indexed in standard ISO tool holders? Yes, the insert follows ISO geometry conventions; compatibility depends on matching the insert form, clearance, tolerance class, clamping method, size and thickness to the holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080202 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 coated carbide and ISO compatibility to ensure stable cutting edges and predictable tool life; the 0.2 mm corner radius and 7° clearance deliver reliable finishing and repeatable set-up. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TCGT080202 SH725 Tungaloy indexable insert for turning — triangular, 7° clearance TCGT080202 SH725 is an ISO‑standard triangular indexable insert designed for external and internal turning applications, offering a tough, edge‑stable grade for variable engagement conditions ISO triangular insert TCGT 080202 SH725 Coated carbide grade SH725 for stable edges 7° clearance angle with 0.2 mm corner radius Cylindrical hole with countersink 40°–60° Greater edge stability for variable cutting conditions The SH725 grade is a coated carbide developed to deliver tough, edge‑stable performance, which means fewer unexpected edge failures and more consistent component quality. In practice, this translates to longer effective tool life when cutting under varying depths of cut or intermittent engagements, and a more predictable finish on turned parts. The modest 0.2 mm corner radius supports improved surface quality on light to moderate finishing passes while reducing the risk of chipping when tool engagement varies. For shops seeking steady production without constant tool changes, this insert offers a tangible reduction in process interruptions. ISO compatibility and secure clamping reduce set‑up time Designed to the ISO system, the insert’s form and dimensions ensure interchangeability with compatible holders; compatibility depends on form, clearance, tolerance class, fastening method, size and thickness, all of which are standardised. The triangular shape with a central cylindrical hole and a one‑sided countersink (40°–60°) provides secure seating and repeatable positioning in both external holders and boring bars. At 2.38 mm thickness, the insert offers sufficient rigidity to resist vibration in many applications, aiding dimensional stability and making inventory management simpler through standard parts that fit a wide range of toolholders. Practical chip control and application flexibility This insert features a single‑sided chipbreaker suited to general turning; selecting the correct chipbreaker and grade in line with workpiece material and machine stability yields the best results. The combination of coated carbide and the chipbreaker design helps to control swarf and direct chips away from the cutting zone, improving tool life and surface finish. For smaller tools or operations where cutting conditions change frequently, the grade’s toughness reduces the likelihood of edge failure, enabling more productive cycles and less operator intervention. Contact Metav Werkzeuge for availability, application guidance and fast ordering of the Tungaloy TCGT080202 SH725 insert; call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 6737025 SKU: 6737025-Tungaloy Manufacturer SKU: TUN6737025 Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Corner radius: 0.2 mm Clearance angle: 7° Included angle: 60° Thickness: 2.38 mm Plate size: 08 Designs / Special features Triangular plate form Coated carbide grade SH725 Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO‑standard indexable insert for turning FAQ What materials is this insert intended for? The TCGT080202 SH725 indexable insert is optimised as a tough, edge‑stable coated carbide for general turning; selection of the appropriate chipbreaker and cutting data should be matched to the specific workpiece material. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius offers a balance between strength and finish: it improves edge robustness while still enabling fine surface quality on finishing and light profiling passes. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions and will be compatible with holders that match the form, clearance, tolerance class, fastening, size and thickness specified for ISO triangular turning plates. What benefits does the SH725 grade provide in production? The SH725 grade provides stable cutting edges and toughness, which reduces the incidence of chipping under variable engagement and supports consistent component quality across shifts. Does the insert include a hole for secure clamping? Yes, the design includes a cylindrical hole with a one‑sided countersink (40°–60°) to ensure secure and repeatable clamping in the toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080202 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a tough, edge-stable SH725 grade and a 0.2 mm corner radius for reliable finishing and long insert life; the ISO compatibility of the triangular form and a 7° clearance angle ensures straightforward replacement and consistent process behaviour. Order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and cutting-data recommendations. TCGT080202 SH725 Tungaloy indexable turning insert — coated cemented carbide, 0.2 mm corner radius The TCGT080202 SH725 is an ISO-standard triangular indexable insert for turning, engineered for variable engagement conditions and particularly suited to small tools and changing cutting depths. Coated carbide SH725 for stable cutting performance Triangular ISO insert, size 08, 7° clearance angle Corner radius 0.2 mm for fine finishing Cylindrical hole with single-sided countersink 40°–60° High-accuracy edges for consistent surface finish The triangular geometry with a 60° included angle and a 0.2 mm corner radius delivers predictable contact conditions at the tool tip, which helps to maintain a uniform surface quality during light to moderate cuts. A small corner radius reduces radial cutting forces and limits vibration on less rigid setups, yielding better dimensional control. The function of a corner radius is to disperse cutting loads across a defined edge radius rather than a single sharp point, thereby improving edge life and contributing to reliable finishing in serial production. Durable grade for variable engagement and small-tool use The SH725 grade is a coated cemented carbide designed for toughness and cutting-edge stability under fluctuating entry conditions. This composition supports performance where chip load, depth of cut and engagement angle vary from pass to pass, a common situation with small-diameter holders or interrupted cuts. The coating improves wear resistance while the substrate toughness reduces edge chipping, offering a balance between productivity and tool life that is particularly valuable in workshops seeking repeatable results without frequent index changes. ISO compatibility and fast indexability to reduce downtime Being an ISO-standard TCGT insert, the component is compatible with a wide range of external holders provided the holder matches the insert form, clearance, tolerance class, fixation, size and thickness. The 7° clearance angle and the cylindrical hole with single-sided countersink (40°–60°) ensure secure clamping and repeatable seating, which simplifies index changes and reduces setup time. A one-sided chipbreaker assists chip control for turning operations, meaning fewer interruptions for chip clearing and a smoother machining cycle. Practical setup guidance and recommended applications The insert forms part of a system comprising the indexable insert itself, a matched external holder or boring bar, a locating shim/clamp set and replacement screws. Typical uses are external and internal turning, where the choice of chipbreaker and grade should match the workpiece material and stability of the machining arrangement. For interrupted cuts, small-diameter tooling or operations with varying engagement, the combination of SH725 and the triangular form provides robustness; for heavy continuous cuts, consider a more wear-focused grade or a larger radius where appropriate. For tailored cutting-data, holder compatibility checks or to order original Tungaloy TCGT080202 SH725 inserts contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will advise on the optimal chipbreaker and setup for the application Technical data Article number: 6737024-Tungaloy Manufacturer article number: 6737024 Manufacturer SKU: TUN6737024 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Size designation: 08 Plate thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 60° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Plate shape: triangular Materials & features Material: cemented carbide Grade/coating: SH725 Coating type: coated cemented carbide Chipbreaker: one-sided Application: turning Typical setup: outer holder or boring bar, shim/clamp set, replacement screws ISO-standard geometry for broad holder compatibility FAQ What machining tasks is this insert intended for? The TCGT080202 SH725 insert is designed for turning operations, covering both external and internal turning where varying engagement conditions or small-tool setups occur. How does the SH725 grade affect performance? SH725 is a coated cemented carbide grade that prioritises edge stability and toughness, improving resistance to chipping during interrupted cuts and offering longer edge life in variable engagement scenarios. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance, tolerance class, fixation method, size and thickness; the ISO-standard TCGT geometry ensures broad compatibility with appropriately specified external holders and boring bars. What is the advantage of the 0.2 mm corner radius? A 0.2 mm corner radius reduces peak cutting forces and helps achieve finer surface finishes on less rigid setups, while also spreading load to prolong edge life compared with a very sharp corner. Does the insert include a hole and countersink for clamping? Yes — the insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to ensure reliable seating and clamping in compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080202 TH10 Wendeplatten - Tungaloy
Take advantage of the TH10 grade’s low cutting forces and the ISO triangle format for steady turning results; the combination of a sharp, uncoated carbide edge and a secure clamping hole supports clean surfaces and repeatable tool changes. Order the TCGT080202 insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT080202 TH10 Tungaloy turning insert (triangle, 60°) The TCGT080202 TH10 Tungaloy insert is an ISO‑standard triangular indexable insert for external and internal turning, optimised for applications with non‑ferrous materials where a sharp, uncoated cutting edge reduces cutting forces and improves surface finish. Triangle ISO insert for 60° toolholders TH10 uncoated carbide for low cutting forces 0.2 mm corner radius for precise profiles Cylindrical hole with one-sided countersink Predictable cutting with the TH10 uncoated grade The TH10 designation identifies a sharp, uncoated carbide grade developed for universal performance in non‑ferrous materials and situations where reduced cutting forces are desirable. As an indexable turning insert, the geometry and grade together minimise built‑up edge and promote clean surfaces, which reduces rework and improves part tolerances. The TCGT080202 geometry provides a reliable combination of edge sharpness and wear resistance that supports consistent cycle times in mixed‑material production. Secure seating and geometry for reproducible profiles Built to ISO form, the triangular insert uses a 60° seating angle that matches standard toolholders and boring bars; the specified 7° clearance angle and tolerance class determine compatibility with the chosen holder. A cylindrical hole with a one‑sided countersink (40°–60°) ensures secure clamping and correct seating, while the 0.2 mm corner radius preserves profile accuracy on small radii and detailed contours. These design choices together give stable cutting conditions and straightforward indexation when refreshing the cutting edge. System integration and versatile application range The insert is intended for a complete system: an ISO insert, a matching external holder or boring bar, a backing plate/clamp set and replacement screws. The single‑sided chipbreaker suits turning operations where chip control is required according to material and process stability. For external and internal turning tasks, this arrangement enables efficient tool changes, predictable chip flow and improved process uptime, making the component suitable for both small batch work and serial production environments. Contact Metav Werkzeuge for stock status and application advice on the TCGT080202 TH10 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and supply options Technical data Manufacturer article number: 6807633 Manufacturer SKU: TUN6807633 Internal SKU: 6807633-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: TCGT080202 Dimensions & key figures Corner radius: 0.2 mm Insert thickness: 2.38 mm Size: 08 Seating angle: 60° Clearance angle: 7° Design & features Material: carbide (uncoated) Grade: TH10 — universal for non‑ferrous materials Insert form: triangular Hole: with hole — cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: one‑sided Application: turning (external and internal) FAQ What materials is this insert intended for? The TCGT080202 TH10 Tungaloy turning insert is optimised for non‑ferrous materials and similar applications where an uncoated edge supports low cutting forces and clean surfaces; the TH10 grade offers broad material compatibility for these purposes. Which toolholders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; the triangular ISO profile and 60° seating permit use with standard 60° external holders and matching boring bars. How does the 0.2 mm corner radius affect machining results? A 0.2 mm corner radius provides precise profile control on small features and reduces the risk of chipping on sharp edges, contributing to stable cutting and consistent surface quality. Is the insert coated and what are the benefits? This insert is uncoated carbide (TH10). The absence of a coating helps maintain a sharp edge and lower cutting forces, particularly advantageous for non‑ferrous materials and finish‑sensitive operations. What components are needed to form a complete cutting system? A complete system comprises the ISO insert, a compatible external holder or boring bar, a backing plate or clamp set and replacement screws; correct assembly and seating are essential for reliable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080202 TH10 Wendeplatten - Tungaloy
Take advantage of the precise combination of a sharp, uncoated carbide grade and ISO compatibility for consistent turning performance; the triangular geometry with a 0.2 mm corner radius delivers fine surface finishes while the 2.38 mm plate thickness ensures secure clamping and stability. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. TCGT080202 TH10 Tungaloy — ISO triangular turning insert, uncoated carbide, 60° included angle The TCGT080202 TH10 Tungaloy is an ISO-standard triangular indexable insert designed for external and internal turning applications, offering low cutting forces and clean surface generation. ISO triangular turning insert TCGT080202 Uncoated carbide grade TH10 0.2 mm corner radius for fine finishing 2.38 mm plate thickness for stability Cylindrical hole with 40°–60° countersink Consistent cutting performance and lower machining effort The combination of a sharp uncoated carbide grade and a triangular geometry yields low cutting forces, which reduces spindle load and can extend tool life across batches. The TH10 grade is a universal, uncoated carbide chosen specifically for applications where a clean cutting edge and reduced cutting effort are priorities, notably in non-ferrous materials. The 0.2 mm corner radius helps to balance edge strength with the ability to achieve a fine surface finish, while the 60° included angle provides predictable chip formation for general turning tasks. Fast integration into existing tool systems and secure clamping Manufactured to ISO dimensions, the insert integrates into standard holders and boring bars without lengthy adaptations; compatibility is determined by form, relief angle, tolerance class, fastening type, size and thickness. The plate’s 2.38 mm thickness and triangular layout contribute to stable clamping and repeatable positioning, reducing setup time and variation between regrinds. The central cylindrical hole with a single-sided countersink (40°–60°) simplifies locating and fastening in commonly used clamping systems, supporting efficient index changes and inventory handling. Material range and surface quality benefits This insert excels in turning non-ferrous metals where minimal surface smear and low built-up edge are required; the TH10 grade supports machining of aluminium alloys, copper and related materials with improved finish quality. The single-sided chipbreaker promotes controlled chip flow for a narrow range of feed rates, aiding chip evacuation and preventing tangling in automatic production environments. For customers seeking reliable finishing performance with straightforward grade selection, the Tungaloy insert offers a pragmatic balance between edge sharpness and in-process robustness. Contact Metav Werkzeuge for specific application guidance on Tungaloy turning inserts, request stock information at info@metav-werkezeuge.com or call +49 2822 7131930 for prompt, expert advice. Technical data Article number: 6807630 SKU: 6807630-Tungaloy Manufacturer SKU: TUN6807630 Label: TCGT080202 TH10 Tungaloy insert Facts Thickness: 2.38 mm Corner radius: 0.2 mm Included angle: 60° Relief angle: 7° Plate size: 08 Special features Uncoated carbide (TH10) Single-sided chipbreaker Triangular plate form Cylindrical hole + single-sided countersink (40°–60°) ISO designation: TCGT080202 Application: external and internal turning Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert best suited for? The TCGT080202 TH10 Tungaloy insert is primarily recommended for non-ferrous metals such as aluminium and copper alloys, where the uncoated grade supports low cutting forces and clean surfaces. How does the 0.2 mm corner radius affect finishing? A 0.2 mm corner radius provides a compromise between edge strength and the ability to achieve smooth surface finishes; with the TH10 grade this supports consistent finishing without excessive burr formation. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO dimensions, so compatibility with common external holders and boring bars is determined by form, clearance angle, tolerance class, fastening and plate thickness. What is the purpose of the single-sided chipbreaker? The single-sided chipbreaker promotes controlled chip formation and evacuation for selected feeds, improving process stability and reducing the risk of chip interference. Can this insert be used for internal turning as well as external turning? Yes. The geometry and ISO sizing of the TCGT080202 TH10 make it suitable for both external and internal turning operations when matched with the appropriate holder and process parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080204 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of a tough, edge‑stable SH7025 coating and the ISO 60° triangular geometry to secure reliable turning performance and consistent tool life; order directly via Metav Werkzeuge or request application advice from our consultants. TCGT 080204 SH7025 turning insert (triangle, 60°) by Tungaloy A TCGT080204 SH7025 triangle insert designed for external and internal turning, offering stable cutting edges for variable engagement conditions and small‑tool applications. ISO 60° triangular insert Coated carbide grade SH7025 Single-sided chipbreaker Cylindrical hole with 40°–60° countersink Reliable cutting performance under variable conditions The SH7025 coated carbide grade delivers a balance of toughness and edge stability, making the insert particularly suited for challenging turning operations and frequent changes in engagement. The combination of a wear‑resistant coating and a robust substrate reduces the risk of premature chipping and supports steady productivity. For machining tasks where consistent tool life and predictable wear are priorities, this indexable cutting insert contributes to process stability and fewer unplanned tool changes. Precision geometry for accurate contours and fine finishes The triangular 60° geometry, together with a 0.4 mm corner radius and 7° clearance, enables accurate profile turning and controlled cutting forces. A small corner radius helps when producing tight radii and fine features, while the clearance angle prevents rubbing and supports a cleaner surface finish. These geometric choices translate into repeatable dimensional control and improved workpiece appearance without sacrificing cutting edge security. ISO compatibility and secure mounting for straightforward integration Manufactured to ISO norms, the insert fits a wide range of standard external holders and boring bars when form, clearance, tolerance class, fastening and size are matched. The cylindrical hole with a 40°–60° single‑side countersink ensures reliable clamping and correct seating in the cutter body. With a 2.38 mm plate thickness the insert offers stable engagement even under interrupted cuts, simplifying selection for existing ISO systems and reducing setup complexity. Effective chip control and suitability for small tools The one‑sided chipbreaker is designed to assist reliable chip formation and evacuation during turning, reducing manual intervention and improving surface quality. The SH7025 grade is optimised for smaller cutters and variable engagement, providing a practical compromise between toughness and wear resistance. When paired with the correct holder and cutting parameters, this insert supports productive turning across a range of standard operations while maintaining consistent cutting behaviour. For application recommendations or to order Tungaloy turning inserts with the SH7025 grade, contact Metav Werkzeuge for tailored advice and prompt supply. Technical Data Article number: 6967538 SKU: 6967538-Tungaloy Manufacturer SKU: TUN6967538 Manufacturer: Tungaloy Series: ISO turning inserts Designation: TCGT080204 Core specifications Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Insert angle: 60° Size: 08 Special features Grade/coating: SH7025 (coated carbide) Chipbreaker: single-sided Hole: cylindrical hole + single-sided countersink (40°–60°) Plate form: triangular Application: turning System: ISO‑standard indexable insert FAQ What materials is this insert intended for? The SH7025‑grade TCGT080204 turning insert is a tough, edge‑stable coated carbide designed for general turning; selection of the chipbreaker and cutting data should be matched to the specific workpiece material and machining conditions. How does the 0.4 mm corner radius affect machining results? A 0.4 mm corner radius provides improved edge strength for finishing and light profiling while allowing finer radii than larger radii would permit; the insert maintains stability thanks to its 60° triangular geometry. Is the insert compatible with standard ISO holders? Yes, the insert conforms to ISO dimensions; compatibility depends on matching form, clearance, tolerance, fastening and size of the toolholder or boring bar. What is the benefit of the cylindrical hole with countersink? The cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and correct seat orientation, reducing the risk of movement and enabling repeatable assembly in cutter bodies. Which operations suit this insert best? The insert is optimised for external and internal turning where stable cutting edges are required, particularly with smaller tools or variable engagement conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 080204 SH725 Wendeplatten - Tungaloy
Benefit from a combination of stable cutting‑edge performance, ISO compatibility and a coated carbide grade optimised for variable cutting conditions to keep turning processes productive and predictable; order directly via Metav Werkzeuge or request guidance from the technical team. TCGT 080204 SH725 Tungaloy turning insert — triangular ISO insert for external and internal turning TCGT 080204 SH725 Tungaloy is an ISO‑format triangular indexable insert designed for general external and internal turning, offering a robust coated carbide grade for small tools and varying engagement conditions. Coated carbide SH725 for edge stability ISO‑format triangular insert, size 08 0.4 mm corner radius with 60° geometry Cylindrical hole with single‑side countersink Consistent cutting performance under changing conditions The SH725 grade is a coated carbide developed for edge stability and resilience when cutting conditions vary. In practice, this means the insert sustains a consistent cutting edge even in interrupted cuts or fluctuating engagement, which reduces unexpected wear and helps maintain surface quality. The single‑layer and multi‑layer coating system improves thermal resistance and wear behaviour, so tool change intervals are more predictable and process stability is enhanced. Precise fit and predictable assembly with ISO holders Supplied in the ISO standard TCGT 080204 format, the triangular geometry with a 60° included angle and a 7° relief ensures compatibility with the majority of ISO‑conforming external holders. Compatibility is determined by the holder’s form, relief angle, tolerance class, clamping method, insert size and thickness; matching these parameters avoids seating errors and runout. The 2.38 mm thickness and standard locating features guarantee repeatable positioning and stable clamping for accurate turning dimensions. Improved productivity through effective chip management The single‑sided chipbreaker and the geometry of the insert optimise chip formation for many turning tasks, reducing the need for manual chip handling and decreasing cycle interruptions. Controlled chip flow shortens cycle time and lessens operator intervention, which in turn improves overall machine utilisation. The 0.4 mm corner radius helps balance strength at the cutting edge with the capacity to achieve fine surface finishes where required. Material suitability and practical application notes Manufactured from precision carbide and finished with the SH725 coating, the insert is suitable for a wide range of turning applications; selection of the appropriate chipbreaker and grade should be made relative to material, cut depth and machine stability. The cylindrical hole with single‑side countersink (40°–60°) supports positive clamping on compatible toolholders and simplifies fast, secure mounting in indexable systems. For small‑scale tools or variable engagement jobs, this insert offers a reliable compromise between durability and cutting performance. For optimised turning results with Tungaloy SH725, contact Metav Werkzeuge for tailored integration advice and ordering support — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737028 Manufacturer SKU: TUN6737028 SKU: 6737028-Tungaloy Series: ISO‑Drehwendeschneidplatten Material: Hartmetall Coating/Grade: SH725 Core specifications ISO designation: TCGT080204 Insert size: 08 Plate shape: triangular Thickness: 2.38 mm Relief angle: 7° Included angle: 60° Corner radius: 0.4 mm Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Design and special features Single‑sided chipbreaker Coated cemented carbide construction Suitable for external and internal turning Compatibility depends on holder form, relief, tolerance, clamping and size Optimised for variable engagement and small tool applications FAQ What materials are recommended for this insert? The TCGT 080204 SH725 insert is manufactured from coated carbide and is suitable for a broad range of turning tasks; selection of the chipbreaker and cutting parameters should follow the workpiece material and machining stability. How does the SH725 grade affect tool life? The SH725 coating enhances edge stability and wear resistance, so the insert typically provides more predictable tool life under interrupted cuts and variable engagement compared with uncoated alternatives. Which holders fit this ISO insert format? ISO‑conforming triangular holders sized for 08 inserts with a 60° seating angle and matching relief and clamping features are compatible; correct fit requires matching form, relief angle, tolerance class, clamping and thickness. Can the insert achieve fine surface finishes? Yes — the 0.4 mm corner radius and the insert geometry allow fine surface finishes when paired with appropriate feeds and stable machine conditions. What fastening does the insert require? The insert uses a centred cylindrical hole with a single‑side countersink (40°–60°) for positive clamping into the designated ISO toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 090204 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of a finishing-focused cermet grade, precise geometry and ISO compatibility for consistent surface quality and reliable tool life; order via Metav Werkzeuge or consult the technical team for application advice. TCGT 090204 NS520 Tungaloy turning insert — cermet finishing, 60° triangular The TCGT090204-01 NS520 is an ISO‑standard triangular turning insert designed for finishing to light machining of steel, optimised for high surface quality and dimensional control. Cermet grade NS520 for fine finishing ISO‑standard triangular insert, TCGT form 0.4 mm corner radius for accurate contours Centre hole with 40°–60° countersink Reliable finishing and consistent dimensional control The combination of the NS520 material and the triangular TCGT geometry delivers a stable cutting edge for finishing operations. The cermet composition emphasises surface finish and dimensional accuracy, providing even wear and predictable results over repeatable cycles. This makes the insert particularly suited to parts where tolerance and appearance matter, such as turned housings or precision shafts. Flexible holder compatibility and secure clamping As an ISO‑standard insert, the geometry and mounting features ensure straightforward integration into compatible external holders and boring bars. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, which simplifies selection and reduces setup time. The 7° clearance and 2.38 mm thickness help maintain stable clamping and predictable load distribution during turning. Consistent chip control for improved productivity Equipped with chipbreaker 01, the insert promotes short, controllable chips during finishing and light machining. The optimised chip formation reduces built‑up edge and contributes to consistent wear, supporting higher process reliability and steady productivity. Choosing a finishing‑grade insert like this one minimises rework and helps maintain cycle‑time targets in batch production. Application guidance and material suitability The insert is intended for turning operations on steel in finishing to light machining applications. Its triangular shape and 0.4 mm corner radius are ideal for fine contouring and profile work. The centre hole design—cylindrical hole with a one‑sided countersink (40°–60°)—ensures precise seating in a wide range of ISO holders. Available in cermet or coated cermet variants, the grade focuses on improving surface integrity while delivering steady edge life. For proven finishing performance with Tungaloy's NS520 grade, contact Metav Werkzeuge for personalised technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6807640 SKU: 6807640-Tungaloy Manufacturer SKU: TUN6807640 Brand: Tungaloy Model series: ISO turning indexable inserts Designation: TCGT090204-01 Material: Carbide Facts Included angle: 60° Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Countersink: 40°–60° Size: 09 Special features Cermet or coated cermet cutting material Chipbreaker 01 for finishing/light machining Centre hole: cylindrical hole + one‑sided countersink Triangular insert form (TCGT) Optimised for finishing and light machining of steel Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What is the primary application for this insert? The TCGT090204-01 NS520 insert is intended for turning, specifically finishing to light machining of steel, where surface quality and dimensional control are priorities. Which holders will accept this insert form? Compatibility depends on the ISO TCGT form and matching holder geometry; the insert’s form, 7° clearance, thickness and fastening type must match the external holder to ensure secure clamping. What advantages does the NS520 grade provide? NS520 is a cermet grade from Tungaloy that emphasises improved surface finish, steady edge life and uniform wear, making it suitable for precision finishing operations. What are the key geometric data to check before ordering? Check the 60° included angle, 0.4 mm corner radius, 2.38 mm thickness, centre hole with cylindrical hole plus one‑sided countersink (40°–60°), and the TCGT090204-01 designation. How does the chipbreaker influence machining? The chipbreaker 01 on this insert promotes short, controllable chips during finishing and light machining, contributing to consistent tool life and reduced risk of built‑up edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 090204 TH10 Wendeplatten - Tungaloy
Combine precise ISO compatibility, a 0.4 mm corner radius and the uncoated TH10 carbide grade for reliable, low‑force turning; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TCGT090204-01 TH10 Tungaloy turning insert — ISO triangular, 0.4 mm radius, 7° clearance A TCGT090204-01 TH10 ISO triangular carbide insert engineered for external and internal turning, optimised for non‑ferrous materials and operations that require low cutting forces. ISO triangular insert, hole + countersink Uncoated TH10 carbide for clean cutting edges 0.4 mm corner radius for precise finishing 7° clearance angle to minimise cutting forces Consistent ISO fit for quick tool changes and predictable results The ISO series construction ensures repeatable seating and clamping in compatible holders, so tool changes are fast and machine downtime is reduced. The insert’s triangular format and standardised dimensions allow selection of a suitable external holder, boring bar or clamp set based on form, clearance angle, tolerance class and thickness. The presence of a central hole with a countersink (40°–60°) supports secure fixation and straightforward replacement of screws or clamps, while the 60° included angle contributes to robust edge support during moderate interrupted cuts. Low cutting forces and surface quality from an uncoated universal grade The TH10 grade is an uncoated carbide designed as a sharp, universal option for non‑ferrous materials and applications where a pristine cutting edge reduces cutting forces and improves surface finish. With its 0.4 mm corner radius, this insert balances edge strength and fine finishing capability: small radii help achieve tight dimensional tolerances and crisp profiles without excessive tool pressure. The uncoated chemistry lowers friction on soft alloys, reducing built‑up edge and simplifying post‑process cleaning, which supports productive machining with fewer secondary operations. Practical system setup and choice of chipbreaker for stable turning Use the insert as part of a system comprising an ISO insert, matched external holder or boring bar, an underlay/clamping kit and spare screws to maintain production continuity. The specified chipbreaker style (01) should be selected with the workpiece material and machining stability in mind: a suitable chipbreaker promotes controlled chip formation, reduces vibration and extends tool life. For versatile turning tasks, pair the insert with a holder that matches the 7° clearance angle and accommodates the 2.38 mm plate thickness to ensure correct rake and contact conditions. For complex applications, our technical team can advise on holder geometry and cutting data to maximise efficiency. Contact Metav Werkzeuge for tailored recommendations on the TCGT090204-01 TH10 insert and to arrange supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6807642 Manufacturer SKU: TUN6807642 ISO designation: TCGT090204-01 Shape: triangular Facts Plate size: 09 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 60° Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Material: carbide Grade/coating: TH10, uncoated carbide Chipbreaker: 01 Application: turning (external and internal) Series: ISO turning inserts Typical system: insert + external holder/boring bar + underlay/clamp set + spare screws FAQ What materials is this insert suitable for? The TCGT090204-01 TH10 Tungaloy turning insert is optimised for non‑ferrous materials and similar workpieces where an uncoated, sharp carbide edge provides low cutting forces and clean surfaces. How does the central hole and countersink affect clamping? A central hole with a single‑side countersink (40°–60°) allows secure fastening with standard ISO clamps or screws; this improves seat stability and repeatability when the insert is mounted in the chosen holder. Which chipbreaker should be selected for finishing cuts? The supplied chipbreaker style 01 is aimed at general turning; for fine finishing and reliable chip control on softer alloys, maintain low feed and select a chipbreaker/housing combination that complements the 0.4 mm radius. Is the insert compatible with standard ISO holders? Yes, the ISO designation and dimensions of the TCGT090204-01 are intended for holders that match the insert form, clearance angle, tolerance class, fastening method, size and thickness; confirm holder specifications before mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110200 J740 Wendeplatten - Tungaloy
Combine ISO compatibility, long-lasting J740 carbide wear resistance and compact triangular geometry to maintain productive turning cycles. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific selection. TCGT110200 J740 Tungaloy indexable insert — ISO turning insert with 60° geometry and 7° clearance TCGT110200 J740 Tungaloy indexable insert for precision external and internal turning, designed to deliver consistent edge stability in demanding production environments. ISO triangular insert, 60° geometry Tungaloy J740 carbide grade for wear resistance 11 mm inscribed circle, 2.38 mm thickness Cylindrical hole with 40°–60° countersink Consistent turning performance that reduces process variability The ISO-standard indexable insert is engineered to provide dependable results in serial turning operations. The combination of the J740 carbide grade and the insert geometry promotes wear resistance and edge stability, which translates into more predictable tool life and less frequent tool changes. For production contexts where repeatability matters, the triangular design with a 60° geometry supports controlled cutting forces and stable chip formation. The result is improved machine uptime and a reduction in unexpected rework resulting from edge degradation. Clear compatibility and mounting to fit established tool systems Compatibility with toolholders is determined by several measurable attributes: form, clearance angle, tolerance class, method of fixation, size and thickness. This insert features an 11 mm inscribed circle (IC) and a 2.38 mm thickness with a 7° clearance angle, ensuring compatibility with ISO holders designed for small triangular inserts. The cylindrical hole with a single-side countersink (40°–60°) enables secure clamping and repeatable seating; proper matching of holder geometry and tolerance class is essential to achieve the intended clamping force and concentricity. Clear specification of these parameters supports swift tool setup and predictable performance in high-volume turning. Process-focused chip control and productivity gains The insert is supplied with a single-sided chipbreaker, chosen to favour consistent chip formation in typical turning tasks. Selecting the appropriate chipbreaker and grade according to workpiece material and machining stability can significantly improve surface finish and extend effective cutting life. By combining a dedicated chip control design with the J740 grade’s balanced toughness and abrasion resistance, the component supports higher material removal rates under stable conditions, contributing to measurable productivity improvements and reduced cycle-time variation. For application advice, matching holder recommendations or to place an order for Tungaloy turning inserts contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist guidance and fast delivery. Technical data Manufacturer article number: 6807646 Manufacturer SKU: TUN6807646 Our SKU: 6807646-Tungaloy Model series: ISO turning indexable inserts Designation: TCGT110200 J740 Facts Inscribed circle (IC): 11 mm Thickness: 2.38 mm Clearance angle: 7° Included angle: 60° Hole: with hole Countersink angle: 40°–60° Special features Material: carbide Grade: J740 (Tungaloy) Chipbreaker: single-sided Shape: triangular Application: turning System: ISO-standard insert Mounting: cylindrical hole with single-side countersink FAQ What turning operations are best suited to this insert? The TCGT110200 J740 Tungaloy indexable insert is designed for both external and internal turning where a triangular 60° geometry and balanced carbide performance are required. What are the key dimensions and angles to check for holder compatibility? Check the 11 mm inscribed circle, 2.38 mm thickness, 7° clearance angle and the 60° included angle; the insert’s hole and countersink style must match the holder’s clamping design. How does the hole and countersink design affect clamping? The cylindrical hole with a single-side countersink (40°–60°) ensures positive seating and repeatable clamping when paired with holders designed for ISO triangular inserts and the appropriate tolerance class. Which machining benefits does the J740 grade provide? The J740 grade offers a balanced mix of wear resistance and toughness, supporting stable cutting edges and predictable tool life when combined with a suitable chipbreaker and machining setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110200 J740 Wendeplatten - Tungaloy
Benefit from the combination of J740 wear resistance and the triangular 60° geometry for stable turning and extended tool life; the configuration reduces downtime and delivers reproducible results. Order the TCGT 110200 J740 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT 110200 J740 – ISO turning indexable insert, triangular 60° (Tungaloy) A TCGT 110200 J740 indexable insert designed for ISO-standard turning, suitable for both external and internal operations where edge stability and consistent wear behaviour are required Triangular 60° geometry for secure seating J740 grade for improved wear resistance 7° relief angle for reliable edge stability Cylindrical hole with 40°–60° countersink Consistent cutting performance and longer run times Engineered around the J740 cutting grade, this indexable insert combines carbide base material with a balanced mix of wear resistance and toughness. The result is a cutting edge that maintains geometry under load, reducing flank wear and preserving surface quality across extended cycles. The built-in single-sided chipbreaker controls chip formation in typical turning tasks, which decreases the risk of built-up edge and improves evacuation on interrupted cuts. For production environments where tool-change intervals affect throughput, the stable edge life translates into fewer interruptions and a lower cost per part without compromising tolerances or finish. Reliable clamping and ISO compatibility for repeatable set-up Designed to the ISO series for turning inserts, compatibility depends on form, 7° relief, tolerance class, clamping method, size and thickness. The insert’s triangular configuration with a 60° included angle provides a positive seating geometry in matching holders, while the cylindrical hole with single-sided countersink (40°–60°) ensures secure orientation and repeatable clamping torque. These mechanical characteristics reduce micro-movement at the cutting edge, limiting vibration and improving dimensional stability. For workshops standardising tooling across machines, this predictability simplifies toolholder inventory and shortens set-up times. Application flexibility and practical selection guidance Intended for turning operations, the insert’s 11 mm inscribed circle and 2.38 mm thickness offer a compact profile suitable for both external and internal turning in stable set-ups. Selection of the single-sided chipbreaker and the J740 grade should be matched to workpiece material, required surface finish and machining strategy: priority on wear resistance for longer runs, or on edge toughness for interrupted cuts. Tungaloy’s development focus delivers consistent cutting behaviour, enabling machinists and process engineers to concentrate on optimising feeds and speeds rather than compensating for tool variation. The compact dimensions also make the insert a pragmatic choice where tool access is restricted. For tailored recommendations on employing the J740 grade in specific turning tasks, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss availability and suitability for production needs. Technical data Article number: 6807643 Manufacturer SKU: TUN6807643 SKU: 6807643-Tungaloy Model series: ISO-Drehwendeschneidplatten Core data Inscribed circle: 11 mm Thickness: 2.38 mm Included angle: 60° Relief angle: 7° Hole: with hole Special features Material: carbide Grade: J740 (Tungaloy) Chipbreaker: single-sided Hole style: cylindrical hole + single-sided countersink (40°–60°) Application: turning (external and internal) FAQ Which machining tasks is this insert best suited for? The TCGT 110200 J740 insert is intended for ISO-standard turning operations, offering a balance of wear resistance and toughness for both external and internal turning in stable set-ups. Will this insert fit my existing ISO holder? Compatibility is determined by insert form, relief angle, tolerance class, clamping style, size and thickness; matching these parameters ensures correct seating and performance with ISO holders. How does the hole and countersink help in clamping? The cylindrical hole combined with a single-sided countersink (40°–60°) provides positive location and secure clamping, reducing the risk of insert rotation and improving repeatability. What should guide the choice of chipbreaker and grade? Select the chipbreaker and the J740 grade according to workpiece material, cutting conditions and machine stability—prioritise wear resistance for long runs and choose tougher configurations for interrupted or unstable cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110200 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH7025, a compact 11 mm ISO triangular form and a precise 7° clearance for steady machining and longer tool life; order directly via Metav Werkzeuge or consult the technical team for tailored advice. TCGT110200 SH7025 Tungaloy indexable insert — ISO triangular insert for turning The TCGT110200 SH7025 is an ISO-standard triangular indexable insert designed for external and internal turning, offering edge-stable performance in varying engagement conditions. Coated carbide grade SH7025 for edge stability ISO triangular insert, 11 mm cutting size 7° clearance angle for reliable chip control With hole and single-sided chipbreaker Consistent cutting performance that reduces downtime The SH7025 grade is a coated carbide developed for edge stability under fluctuating cutting conditions, which benefits small tools and variable engagements. As a result, tool changes are required less frequently and surface quality is maintained more consistently. The coating and substrate combination provides improved wear resistance so that batch runs remain predictable; this advantage supports higher productivity and lowers overall machining interruptions. Precise fit and clamping for repeatable results Compatibility with holders is governed by form, clearance, tolerance class, fastening, size and thickness; the insert is supplied in an ISO-standard geometry to ensure reliable seating. The insert features a cylindrical hole with a one‑sided countersink (40°–60°), enabling secure clamping and repeatable positioning. Correct clamping reduces vibration and offers a stable cutting edge, which translates into consistent dimensional accuracy across workpieces. Practical application guidance for turning operations Engineered for both external and internal turning, this triangular insert with a single-sided chipbreaker is suitable when a defined chip form and stable cutting action are required. The 11 mm cutting size and 7° clearance minimise rubbing while maintaining effective chip evacuation, particularly in operations where tool rigidity varies. In a typical turning system the insert works together with a matched holder, shim and fastening screws — selecting the appropriate chipbreaker and grade according to material and process stability delivers the clearest productivity gains. Contact Metav Werkzeuge for availability and technical advice on Tungaloy indexable inserts at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6967521 Manufacturer SKU: TUN6967521 SKU: 6967521-Tungaloy Designation: TCGT110200 SH7025 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core data ISO code: 110200 Included angle: 60° Insert size: 11 mm Thickness: 2.38 mm Clearance angle: 7° Hole: mit Loch Special features Shape: triangular Coating/grade: SH7025 (coated carbide) Chipbreaker: one-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning FAQ What materials is this insert suited for? The TCGT110200 SH7025 insert is a coated carbide grade intended for a wide range of turning tasks; selection of the chipbreaker and grade should be matched to the workpiece material and required stability. How is the insert fixed in the holder? Fixing is achieved via the central cylindrical hole and the one-sided countersink; correct clamping according to the holder’s form and tolerance class ensures repeatable positioning for the insert. Can this insert be used for both external and internal turning? Yes, the ISO triangular geometry of the insert allows use in external and internal turning applications when paired with a suitable holder and correct mounting components. Which feature improves chip control with varying entry conditions? The combination of the single-sided chipbreaker and the SH7025 coated carbide substrate promotes stable chip formation and evacuation under changing engagement conditions. What should be checked for holder compatibility? Compatibility depends on insert form, clearance, tolerance class, fastening method, size and thickness; ensure the holder matches the ISO designation and the insert’s 11 mm dimension. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110200 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of durable coated carbide, proven SH7025 edge stability and ISO conformity for dependable turning performance; order genuine parts or consult Metav Werkzeuge for application support. TCGT 110200 SH7025 – Tungaloy turning insert (triangular, ISO 110200, for turning) A TCGT110200 SH7025 ISO triangular indexable insert designed for external and internal turning, optimised for edge stability in small tools and varying engagement conditions Coated carbide SH7025 for edge stability 7° relief angle for versatile engagement Triangular 11 mm form, ISO 110200 Cylindrical hole with 40°–60° countersink Single-sided chipbreaker for controlled chips Productive cutting with a tough, coated grade The combination of a coated carbide substrate and the SH7025 grade provides high resistance to edge chipping and steady performance under fluctuating cutting conditions. This turning insert is particularly effective where tool overhangs and smallholder sizes demand robust cutting edges. The coating reduces wear at the cutting edge, which translates into longer periods between indexings and fewer unplanned interruptions — a direct contribution to improved process efficiency and predictable cycle times. Secure seating and reproducible chip control Designed as an ISO triangular insert, the part features an 11 mm edge size, a thickness of 2.38 mm and a 7° relief angle, together ensuring consistent geometry when clamped. The cylindrical mounting hole with a 40°–60° countersink allows reliable clamping and repeatable positioning in standard holders. The single-sided chipbreaker channels swarf away from the cutting zone for controlled chips and reduced workpiece re-cutting, simplifying chip evacuation and enhancing surface finish. Versatile application and reduced process risk Intended for external and internal turning, the insert suits a broad range of machining tasks when the correct chipbreaker and grade are matched to material and stability. The ISO conformity simplifies tool selection and replacement across systems, while the robust edge behaviour of SH7025 supports productive machining with fewer index changes. For operations where downtime is critical, the combination of consistent tool life and stable cutting behaviour offers clear cost‑efficiency through lower tooling costs per part and more reliable throughput. Contact Metav Werkzeuge for genuine Tungaloy SH7025 inserts and tailored machining recommendations from our specialists Technical Data Article number: 6967539 Manufacturer SKU: TUN6967539 Model series: ISO turning inserts Material: carbide Application: turning Facts ISO designation: 110200 Edge size: 11 mm Thickness: 2.38 mm Relief angle: 7° Included angle: 60° Special features Grade: SH7025 Coated carbide Triangular form Cylindrical hole with 40°–60° countersink Single-sided chipbreaker FAQ What materials is this insert suitable for? The TCGT110200 SH7025 insert is designed for turning a wide range of materials when selected with the appropriate chipbreaker and cutting data; the SH7025 grade is optimised for edge stability across variable conditions. How does the hole and countersink affect clamping? The cylindrical hole combined with a 40°–60° countersink ensures reproducible seating and torque distribution in compatible holders, reducing the risk of slippage during turning operations. Which features reduce the need for frequent index changes? The coated carbide substrate and the SH7025 grade deliver enhanced edge resistance and stable cutting behaviour, which contribute to longer intervals between indexing. Is the insert compatible with ISO standard holders? Yes, the insert follows ISO designation 110200 and is intended for use in holders that match the form, relief angle, tolerance class, fastening and size specifications. What is the benefit of the single-sided chipbreaker? The single-sided chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of chip re-cutting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110200 SH7025 Wendeplatten - Tungaloy
The combination of a coated carbide grade designed for edge stability, a compact triangular form and a precise 7° clearance angle ensures reliable chip control and repeatable turning performance. Order directly via Metav Werkzeuge or consult our specialists for application advice. TCGT 110200 SH7025 Tungaloy indexable insert — triangular coated carbide for turning, 7° clearance TCGT 110200 SH7025 Tungaloy indexable insert is an ISO-standard turning insert intended for external and internal turning applications where stable cutting edges and reliable chip formation are required Coated carbide grade SH7025 for edge stability Triangular 11 mm insert with 7° clearance ISO-standard insert compatible with matching holders Cylindrical hole with single-side countersink (40°–60°) High stability for variable cutting conditions The insert brings consistent edge life through the SH7025 coated carbide grade, developed for applications with changing engagement and smaller tool geometries. The coating and substrate combination provides increased resistance to flank wear and edge chipping, which leads to longer tool intervals and fewer interruptions in production. In practical terms, this means more parts produced per insert and a reduction in unscheduled tool changes, benefiting process efficiency and cost control. Designed for reliable chip control and repeatability Featuring a single-sided chipbreaker and a triangular outline, the component offers predictable chip formation in both roughing and light finishing operations. The 7° clearance reduces rubbing at the flank while maintaining sufficient support behind the cutting edge, helping to preserve surface integrity on the workpiece. For engineers specifying holders and toolpaths, the insert’s ISO geometry simplifies changeovers and aids repeatable set-up when paired with compatible external holders or boring bars. Compact geometry for versatile turning tasks With an 11 mm inscribed circle and a plate thickness of 2.38 mm, the insert suits confined tool pockets and small-diameter holders without sacrificing rigidity. The cylindrical mounting hole with a single-side countersink (40°–60°) enables secure clamping and accurate location, reducing micro-movement under load. This compact format is particularly advantageous in batch production or multi-operation setups where fixture space is limited and tool stability remains essential. Practical guidance for material selection and use The grade is optimised for general turning where toughness and edge stability are priorities; it performs well on mixed materials and varying cut depths. When selecting cutting parameters, favour moderate cutting speeds and steady feed rates for best life under interrupted or variable engagement. The ISO-series construction means that the insert will fit standard ISO turning systems provided form, clearance angle and size match the chosen holder; verify compatibility by comparing shape, thickness and fastening type with the toolholder specifications. Contact Metav Werkzeuge today for tailored advice on toolholder compatibility, cutting parameters and supply of Tungaloy inserts — or ask our consultants to recommend the ideal grade and chipbreaker for the intended turning task Technical Data Manufacturer article number: 6967516 SKU: 6967516-Tungaloy Brand: Tungaloy Series: ISO turning indexable inserts Designation: TCGT110200 SH7025 Numbers / Core technical data Inscribed circle: 11 mm Thickness: 2.38 mm Clearance angle: 7° Included angle: 60° Manufacturer SKU: TUN6967516 Designs / Special features Triangular plate form Coated carbide grade SH7025 With hole: cylindrical hole + single-side countersink (40°–60°) Single-sided chipbreaker ISO-standard for external and internal turning FAQ What materials is this insert best suited for? This insert, with its SH7025 coated carbide, is aimed at a broad range of turning tasks where edge stability is required; it handles mixed material conditions and variable engagements effectively. How is the insert secured in the holder? The indexable insert uses a cylindrical mounting hole with a single-side countersink (40°–60°) to enable positive clamping when matched with an appropriate ISO-compatible holder. Can this insert be used for internal boring as well as external turning? Yes, the ISO-series geometry and compact triangular form make the insert suitable for both external and internal turning, provided the holder accepts the 11 mm inscribed circle and 2.38 mm thickness. What does the SH7025 designation signify? SH7025 denotes a coated carbide grade optimised for toughness and edge stability, designed to minimise chipping under varying cutting conditions. Does the included angle affect cutting performance? The 60° included angle is characteristic of the triangular form and contributes to multiple indexing positions, balancing edge strength and accessible cutting corners. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110200 SH725 Wendeplatten - Tungaloy
Combine the proven coated carbide SH725 grade with ISO conformity and a 7° relief to achieve reliable, chip‑stable results in both external and internal turning; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TCGT110200 SH725 Tungaloy indexable insert for turning, 60° corner TCGT110200 SH725 is an ISO‑standard triangular turning insert designed for external and internal turning applications where variable engagement and tool stability require a chip‑stable, coated carbide grade. ISO‑standard triangular insert Coated carbide grade SH725 7° relief; 60° corner angle Cylindrical hole with 40°–60° countersink Consistent chip control and process reliability The combination of a coated carbide substrate and a dedicated chipbreaker profile provides dependable chip formation even under changing engagement conditions. The insert’s geometry supports predictable chip flow, reducing the risk of entanglement and facilitating stable cutting forces. For turning operations, this leads to more consistent surface finishes and fewer interruptions in production. Optimised for ISO tooling systems and easy integration Manufactured to ISO dimensions, the triangular plate fits widely available holders and tooling systems; compatibility depends on form, clearance angle, tolerance class, fastening and thickness. The ISO standard designation simplifies tool selection and inventory management across mixed‑machine environments, enabling rapid integration into established tool packs without the need for custom adapters. Durable performance with SH725 for small tools and variable cuts The SH725 grade is a tough, edge‑stable coating ideally suited to smaller inserts and fluctuating cutting conditions. Its formulation balances wear resistance with fracture toughness, extending tool life where interrupted cuts or variable engagement depths are common. The result is fewer index changes and improved overall tool economy for batch and job‑shop production. Practical mounting and geometry details for reliable clamping The insert is triangular with an included 60° corner and a 7° relief to suit standard turning profiles. A central cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and repeatable seating on the holder. With a plate thickness of 2.38 mm and nominal size 11 mm, the component offers a compact solution for precision turning while maintaining sufficient rigidity for effective metal removal. For robust, chip‑stable turning with Tungaloy’s SH725 grade, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737141 Manufacturer article number: 6737141 Manufacturer SKU: TUN6737141 SKU: 6737141-Tungaloy Manufacturer: Tungaloy Facts ISO code: 110200 Size: 11 mm Thickness: 2.38 mm Relief angle: 7° Corner angle: 60° Countersink angle: 40°–60° Features Coated carbide grade SH725 Triangular plate form Single‑side chipbreaker Cylindrical hole with single‑side countersink ISO‑standard indexable turning insert Application: turning FAQ What applications is this insert suited for? The TCGT110200 SH725 Tungaloy indexable insert is intended for external and internal turning operations, offering good chip control and edge stability for variable engagement conditions. How does the SH725 grade affect tool life? SH725 provides a balance of toughness and wear resistance, so the TCGT110200 achieves prolonged life under interrupted cuts and fluctuating engagement, reducing index changes and downtime. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness; the TCGT110200 conforms to ISO dimensions to ease selection for standard turning holders. What clamping and seating features does the insert have? The insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping and repeatable seating, supporting stable cutting conditions and reliable repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110200 SH725 Wendeplatten - Tungaloy
With a coated carbide SH725 grade and a triangular 60° geometry combined with a 7° relief, this insert delivers stable cutting and long edge life in variable turning engagements. Order through Metav Werkzeuge for reliable supply or consult the team for application-specific advice. TCGT 110200 SH725 Tungaloy indexable insert for turning (triangular, 7° relief) TCGT 110200 SH725 is a coated carbide indexable insert for turning, engineered for consistent edge stability and reliable chip control in changing engagement conditions. Coated carbide grade SH725 Triangular 11 mm insert 7° relief angle for sharp engagement Cylindrical hole with 40°–60° countersink Optimised wear resistance and consistent cutting performance The TCGT110200 SH725 is built on a coated carbide substrate that prioritises edge stability under varying cutting depths and intermittent engagement. The SH725 grade is formulated for toughness and predictable wear behaviour, which helps maintain cutting geometry longer and reduces unexpected tool changes. For production runs where small tools or fluctuating chiploads occur, the combination of coating and substrate hardness supports repeatable cycle times and a steady surface finish. This results in improved process reliability and lower overall machining costs per part. Clear compatibility and simple mounting logic Compatibility with toolholders is defined by a set of measurable parameters: shape, relief angle, tolerance, fastening, size and thickness. The triangular geometry and the 7° relief of this insert require a matching seat and clamping arrangement, while the cylindrical hole with single-side countersink (40°–60°) ensures secure axial positioning and straightforward screw fixing. The insert’s 2.38 mm thickness and 11 mm cutting-edge length are standard values that make selection predictable; when replacing inserts, verify these dimensions against the holder specification to guarantee correct siting and chip flow. Practical benefits for production: chip control and process stability A single-sided chipbreaker integrated into the cutting face gives focused chip control for typical turning tasks, decreasing the risk of long tangling chips and improving surface outcomes. The ISO standard form factor simplifies procurement and tool planning across mixed fleets. With a triangular geometry that provides three usable cutting corners per insert, the indexable solution supports economical part processing and predictable tool-change intervals. The one-sided chipbreaker is particularly useful when pairing the insert with suitable holders for finishing or medium-duty roughing, providing a balance between chip control and edge strength that benefits small-batch and high-mix production alike. For application-specific recommendations on Tungaloy SH725 inserts and to check stock or delivery options, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance. Technical Data Manufacturer article number: 6838674 Manufacturer SKU: TUN6838674 Metav SKU: 6838674-Tungaloy Designation: TCGT110200 SH725 Tungaloy insert Model series: ISO turning indexable inserts Facts Insert size: 11 mm Thickness: 2.38 mm Included angle: 60° Relief angle: 7° Countersink angle: 40°–60° Special features Material: carbide Coating/grade: SH725 Shape: triangular Chipbreaker: one-sided Hole: cylindrical with single-side countersink Application: turning FAQ What operations is this insert intended for? This indexable insert is designed primarily for turning operations; the TCGT 110200 SH725 offers versatility for external and internal turning where stable cutting and chip control are required. Which cutting conditions suit the SH725 grade? The SH725 grade is a tough, edge-stable coated carbide suitable for variable engagement and smaller tool applications; select the chipbreaker and holder according to the specific workpiece and machining strategy. What are the key dimensions and mounting details of the insert? The insert measures 11 mm in size with a thickness of 2.38 mm, a 60° included angle and a 7° relief; it features a cylindrical hole with a single-side countersink (40°–60°) and is supplied as an ISO-standard turning insert (TCGT110200, SKU TUN6838674). How does the chipbreaker affect machining? The one-sided chipbreaker improves chip control during turning, promoting short, manageable chips and enhancing surface finish while maintaining edge strength under common cutting conditions. How to ensure correct holder compatibility for a new insert? Holder compatibility depends on the insert’s shape, relief angle, tolerance, fastening method, size and thickness; verify these parameters against the holder specification to ensure secure seating and ideal cutting geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110200 SH725 Wendeplatten - Tungaloy
High edge stability, a compact triangular form and a controlled chipbreaker enable consistent turning results with minimal tool changes; the coated carbide SH725 grade and the 7° rake angle support stable performance under varying engagement. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. TCGT110200 SH725 indexable insert for turning — Tungaloy (coated carbide, 7° rake) TCGT110200 SH725 is an ISO‑standard indexable insert designed for general turning operations, providing a tough, edge‑stable grade for smaller tools and variable engagement conditions. ISO‑standard triangular insert 11 mm Coated carbide grade SH725, edge stability 7° rake angle with 60° included angle Cylindrical hole + single‑side countersink (40°–60°) Engineered for consistent, productive turning The SH725 coated carbide formulation delivers a balance of toughness and wear resistance that favours reliable edge life in variable cutting conditions. The insert's triangular form and 60° included angle provide versatile geometry for both external and internal turning, while the compact 11 mm size and 2.38 mm thickness suit operations with limited toolholder space. The one‑sided chipbreaker offers controlled chip formation and evacuation, reducing the need for frequent chip management and contributing to a steadier surface finish. These technical characteristics translate directly into measurable production benefits: longer intervals between indexings and fewer unplanned stops for regrind or replacement. Simple integration into ISO‑based tool systems As an ISO‑designated part (TCGT110200), compatibility with the toolholder is determined by form, rake angle, tolerance class, fastening method, size and thickness. The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°), enabling secure mounting with common clamping kits and screws. For a complete system, combine the indexable plate with a suitable external holder or boring bar, a matching shim/clamp set and replacement screws — this ensures correct seating, repeatable clamping torque and consistent tool position across serial production. Clear knowledge of these interface parameters simplifies tooling selection and minimises downtime when switching inserts. Practical guidance on selection and machining gains Select the chipbreaker and the SH725 grade to match workpiece engagement and stability; the tougher grade is especially appropriate for smaller cutters and interrupted cuts where edge robustness matters. Using this insert in a well‑matched holder improves process security and often yields better surface quality with fewer passes, which is especially valuable in jobbing and small batch production. The combination of a reliable chipformer and the coated carbide substrate also supports higher average metal removal rates over unoptimised tooling, delivering a favourable cost‑to‑performance ratio in repetitive turning tasks. For complex material mixes or atypical feeds, technical guidance ensures the chosen configuration meets both productivity and surface requirements. For orders or machining advice on the TCGT110200 SH725 Tungaloy indexable insert, contact Metav Werkzeuge for tailored recommendations and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737030 SKU: 6737030-Tungaloy Manufacturer SKU: TUN6737030 Manufacturer: Tungaloy Facts ISO code: 110200 Size: 11 mm Thickness: 2.38 mm Rake angle: 7° Included angle: 60° Countersink angle: 40°–60° Special features Coated carbide grade SH725 One‑sided chipbreaker Triangular shape Cylindrical hole with single‑side countersink Compatible with holder, shim and clamp set ISO‑standard indexable insert for turning FAQ What applications is this insert designed for? This indexable insert is intended for turning operations; the TCGT110200 SH725 is especially suited to external and internal turning where stable cutting edges and compact geometry are required. How is compatibility with a toolholder determined? Compatibility depends on form, rake angle, tolerance class, fastening, size and thickness; the TCGT110200 designation and the 7° rake angle must match the holder seating and clamping system. What chip control can be expected from this insert? The one‑sided chipbreaker on the SH725 insert promotes predictable chip formation and evacuation, improving surface finish and reducing interruptions from problematic chips. Which dimensions and mounting details are critical for selection? Key dimensions are the 11 mm inscribed circle, 2.38 mm thickness, 60° included angle and the cylindrical hole with a 40°–60° countersink for secure fastening. When is SH725 the preferred grade? SH725 is a tough, edge‑stable coated grade, recommended for applications with variable engagement or where smaller tool sizes are used and robust edge life is needed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com