TCGT 110200 SH725 Wendeplatten - Tungaloy
Reliable performance from a tough, coated SH725 grade and a precise 60° geometry combine to give stable cutting and predictable tool life; compatibility with ISO holders is governed by form, relief angle, tolerance class, clamping and size. Order the insert directly via Metav Werkzeuge or consult our specialists for holder matching and process optimisation. TCGT 110200 SH725 indexable turning insert — triangular 60° for turning — Tungaloy The TCGT110200 SH725 is an ISO triangular indexable turning insert designed for external and internal turning, offering a tough, cutting-edge-stable coated carbide grade for variable engagement conditions. ISO triangular insert TCGT 110200 Coated carbide grade SH725 60° included angle, 7° relief Cylindrical hole with single‑side countersink Increased process stability through material and geometry The combination of a coated carbide substrate and the SH725 grade provides a balance of toughness and edge stability that helps to reduce unexpected tool failures in turning operations. The 60° included angle and 7° relief are designed to suit a wide range of turning tasks while maintaining effective chip formation; when the correct chipbreaker and grade are selected for the workpiece and machine rigidity, the result is improved cycle times and fewer tool changes. Compatibility with the clamping system and tolerance class ensures predictable engagement, which supports consistent surface quality and repeatable production runs. Secure clamping and straightforward indexability for busy shops The insert’s triangular form and the cylindrical hole with a single‑side countersink (40°–60°) enable reliable positioning in a matching holder, reducing the risk of movement under load. The ISO designation and standard dimensions make it possible to fit the insert into a wide range of external holders, boring bars and clamping kits when the holder geometry and fastening hardware match the insert’s size and thickness. This straightforward mechanical interface helps to minimise setup time and simplifies inventory management for workshops that rely on rapid insert changes. Practical selection guidance and operational benefits For economical, productive turning, select the single-sided chipbreaker and the SH725 grade to match the workpiece material and the intended cutting conditions; this grade is especially suitable for smaller tool assemblies or applications with variable engagement. The insert thickness of 2.38 mm and the inscribed size of 11 mm offer a compact profile for tight-tooling layouts while retaining sufficient cutting edge strength. Proper selection of the matching holder, shim/clamp set and replacement screws completes the system and supports longer tool life and better surface finishes, translating into lower overall machining costs and higher throughput. Contact Metav Werkzeuge today to source the Tungaloy TCGT110200 SH725 indexable turning insert and obtain application-specific advice on holder compatibility and chipbreaker selection Technical data Article number: 6737029 Manufacturer SKU: TUN6737029 Brand: Tungaloy Designation: TCGT110200 SH725 Facts Insert shape: triangular Inscribed size: 11 mm Thickness: 2.38 mm Included angle: 60° Relief angle: 7° Hole: with hole; cylindrical hole + single‑side countersink 40°–60° Chipbreaker: single-sided Grade/coating: SH725 (coated carbide) Special features Application: turning (external and internal) Series: ISO indexable turning inserts System components: matching holder, shim/clamp set and replacement screws Optimised for small tools and variable entry conditions FAQ What are the main benefits of the SH725 grade for turning? The SH725 grade used in the TCGT110200 SH725 insert from Tungaloy delivers a tough, cutting‑edge‑stable performance that is particularly effective in small‑tool assemblies and when cutting conditions vary, helping to extend edge life and maintain process reliability. How is compatibility with holders ensured? Compatibility is determined by the insert form, 7° relief, tolerance class, clamping method, the 11 mm inscribed size and 2.38 mm thickness; matching those parameters with a suitable holder and clamp set permits secure use of the TCGT110200 SH725 insert. What advantage does the cylindrical hole with countersink provide? The cylindrical hole combined with a single‑side countersink (40°–60°) ensures positive location and improved clamping security, reducing the likelihood of insert shift during heavy cuts and supporting consistent repeatability. Can this insert be used for internal turning? Yes, the geometry and ISO form of the insert make it suitable for both external and internal turning operations when paired with an appropriate boring bar or holder and correct chipbreaker selection. How many times can the insert be indexed? The triangular geometry provides multiple usable cutting edges for indexing; the actual number of index positions depends on the insert orientation and the machining strategy applied with the TCGT110200 SH725 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110200 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of a tough, edge-stable SH730 grade and ISO conformity to reduce tool changes and maintain consistent cycle times; order directly via Metav Werkzeuge or ask consultants for compatibility advice. TCGT110200 SH730 – ISO triangular turning insert, 7° clearance (Tungaloy) A TCGT110200 SH730 indexable turning insert designed for external and internal turning, compatible with ISO toolholders and suited to variable engagement conditions. Tungaloy SH730 coated carbide grade ISO triangular insert, 11 mm across corners 7° clearance angle for reliable cutting Cylindrical hole with single-side countersink Longer tool life in variable turning applications The SH730 coating is a tough, edge-stable coated carbide grade developed for turning where engagement conditions change or where smaller tools are used. By maintaining a stable cutting edge, the insert reduces the frequency of index changes and supports longer uninterrupted runs, which contributes to improved process efficiency and lower machine downtime. The composition and coating of the grade balance wear resistance with resistance to chipping, offering predictable performance across many conventional turning operations. Secure clamping and straightforward ISO compatibility Designed as an ISO-standard insert, the triangular geometry with an 11 mm corner size and a 2.38 mm thickness ensures conformity with common external holders. The cylindrical hole with a single-side countersink (40°–60°) provides reliable positioning and strong clamp contact, so tool assemblies remain stable under varying cutting forces. Compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness, which simplifies inventory management and reduces the risk of mismatched components in the toolroom. Practical cutting performance and system benefits The single-sided chipbreaker on this insert controls chip formation for many turning tasks and helps maintain surface finish while enabling effective chip evacuation. Used within a system that includes a matching toolholder, shim or clamping set and replacement screws, the insert enables quick index changes and predictable geometry after each regrind or replacement. For shops seeking steady productivity, the combination of the insert’s geometry, the 7° clearance angle and the SH730 grade supports repeatable results and ease of integration into existing ISO tooling systems. Contact Metav Werkzeuge for application matching, compatibility checks and to secure original Tungaloy inserts; eMail: info@metav-werkzeuge.com │ Tel: +49 2822 7131930 Technical Data Article number: 6854029 Manufacturer SKU: TUN6854029 SKU: 6854029-Tungaloy Model series: ISO turning indexable inserts Article name: TCGT110200 SH730 Tungaloy insert Data ISO designation: 110200 Size across corners: 11 mm Thickness: 2.38 mm Clearance angle: 7° Corner (included) angle: 60° Countersink angle range: 40°–60° Special features Material: coated carbide Grade/coating: SH730 Chipbreaker: one-sided Hole style: cylindrical with single-side countersink Shape: triangular Application: turning (external and internal) System components: matching holder, shim/clamping set, replacement screws FAQ What turning tasks suit this insert best? The TCGT110200 SH730 insert is designed for both external and internal turning operations, especially where engagement conditions vary or where small-tool performance and edge stability are important. How does the SH730 grade affect tool life? SH730 is a tough, coated carbide grade that resists edge chipping and supports longer tool life under fluctuating cutting conditions; the TCGT110200 benefits from this stability during interrupted or variable-turning tasks. Which holders are compatible with this ISO insert? Compatibility requires a holder that matches the ISO form, the 7° clearance, tolerance class, fixing method, size (11 mm) and thickness (2.38 mm) of the insert; many standard ISO toolholders will accept the TCGT110200 when these parameters align. What is the purpose of the countersunk hole design? The cylindrical hole with a single-side countersink (40°–60°) ensures accurate seating and secure clamping, reducing micro-movement during cutting and enhancing repeatable positioning for the insert. What are the key dimensions to check before fitting? Check the corner size (11 mm), plate thickness (2.38 mm), clearance angle (7°) and the ISO designation (110200) to confirm correct fit and function for the intended holder and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110200 TH10 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, TH10 uncoated carbide grade and a precise ISO triangular form to achieve low cutting forces and consistently clean surface finishes; order the TCGT110200 TH10 turning insert directly via Metav Werkzeuge or consult the team for application advice. TCGT110200 TH10 Tungaloy turning insert — triangular ISO insert for turning A TCGT110200 TH10 ISO triangular turning insert designed for external and internal turning, offering a sharp uncoated cutting edge for low cutting forces and fine surface results. ISO triangular insert, 11 mm across corners Uncoated carbide grade TH10 for low cutting forces Single-sided chipbreaker with cylindrical hole 7° relief angle for reduced cutting effort Consistent low cutting forces for cleaner finishes The combination of the TH10 uncoated carbide and a 7° relief angle reduces cutting resistance and supports a sharp cutting edge, which directly benefits surface quality in finishing cuts. An uncoated cemented carbide grade is chosen here because it minimises friction and avoids thermal buildup at the edge, resulting in low cutting forces and a clean surface finish on non‑ferrous components. This makes the insert especially suitable when minimal smearing and excellent dimensional control are required during turning operations. Standardised triangular geometry for reliable holder compatibility The insert follows ISO dimensions and the triangular shape with a 60° included angle provides a stable cutting geometry and repeatable positioning. The nominal size 11 mm and a thickness of 2.38 mm align with holder specifications, while compatibility is determined by form, relief angle, tolerance class, fastening style and thickness. The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) to ensure positive location and dependable clamping in a wide range of external holders and boring bars, simplifying tool setup and changeover. Predictable chip control and robust clamping for productive turning A single-sided chipbreaker on the active face helps to control chips for many non‑ferrous operations, improving process stability and reducing downtime for manual chip handling. The insert forms part of a system comprising the insert itself, a matching external holder or boring bar, plus a shim/clamping set and spare screws, which together provide repeatable clamping force and secure seating. The result is increased productivity through fewer interruptions and consistent cutting behaviour when machining batches or longer runs. Optimised for non‑ferrous materials and general turning tasks This uncoated, sharp grade is intended primarily for non‑ferrous materials and applications where a low‑force cutting edge is advantageous. Typical uses include machining aluminium alloys, copper and similar materials in both external and internal turning. Selection of the correct chipbreaker and holder rigidity will determine achievable feeds and surface finishes; the insert’s geometry and grade allow operators to favour fine finishing passes or light roughing with reduced risk of built‑up edge. For multi‑material shops, the ISO form simplifies inventory management and tool interchange. Contact Metav Werkzeuge for application-specific recommendations on the TCGT110200 TH10 turning insert or to request a detailed quote — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6807648 Manufacturer SKU: TUN6807648 SKU: 6807648-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Core specifications Size: 11 mm Thickness: 2.38 mm Relief angle: 7° Included angle: 60° Hole: cylindrical hole + one-sided countersink (40°–60°) Shape: triangular Special features Grade: TH10 (uncoated) Chipbreaker: single-sided Application: turning (external and internal) System composition: ISO insert, matching external holder or boring bar, shim/clamping set and spare screws Typical use: non‑ferrous materials and low cutting force applications FAQ Is the insert suitable for aluminium and other non‑ferrous materials? The TCGT110200 TH10 insert is optimised for non‑ferrous materials such as aluminium and copper; its TH10 uncoated grade and sharp cutting edge promote low cutting forces and fine surface finishes. What holder features are required for secure clamping? A holder that matches the ISO triangular geometry, accepts the 11 mm size and provides a positive location for the cylindrical hole with countersink will ensure secure clamping and repeatable positioning. Can the insert be used for roughing operations? While the insert is primarily designed for applications favouring low cutting forces and finish quality, it can be used for light roughing provided appropriate feeds and a sufficiently rigid holder are selected. How does the single‑sided chipbreaker affect chip formation? The single‑sided chipbreaker provides controlled chip segmentation and directional evacuation, which improves process stability and reduces manual chip clearing during turning. Is the insert supplied with screws or clamping components? The insert is part of a system that typically includes the matching clamping shim set and spare screws; confirm specific delivery scope with Metav Werkzeuge when ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110200 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, uncoated carbide TH10 grade and ISO conformity for clean surface finishes and low cutting forces; the compact triangular geometry with a 7° relief angle ensures secure clamping and predictable machining results. Order the insert directly via Metav Werkzeuge or ask their consultants for holder compatibility and application advice. TCGT110200 TH10 ISO 110200 triangular insert for turning — Tungaloy The TCGT110200 TH10 indexable insert is an ISO-standard triangular turning insert designed for external and internal turning where low cutting forces and excellent surface quality are required. ISO 110200 triangular insert for turning Uncoated carbide grade TH10 for low cutting forces 7° relief angle and 60° included angle Cylindrical hole with single-sided countersink Sharper cuts and lower cutting forces with an uncoated TH10 grade The uncoated carbide TH10 grade is formulated as a sharp, universal option for applications on non‑ferrous and easily machined materials. Its geometry and edge preparation reduce cutting forces, which translates into less deflection on slender parts and improved surface finishes. Specifying a sharp, uncoated grade is particularly advantageous when the priority is controlled chip formation and minimal burrs rather than extreme wear resistance. Predictable clamping and ISO compatibility for reliable production Because the insert conforms to the ISO 110200 family, compatibility with holders is governed by measurable factors such as shape, relief angle (7°), tolerance class, clamping method, size and thickness. The compact 2.38 mm thickness and 11 mm size support rigid mounting in matched indexable holders. Choosing the correct clamping set and seating pad reduces vibration, enabling consistent tool life and repeatable component quality. Geometry and chip control that support finishing operations The triangular form with a 60° included angle gives three usable cutting edges per insert, improving economy in batch production. A single-sided chipbreaker helps to break and evacuate chips in light to moderate cutting conditions, aiding surface integrity. The insert’s hole — a cylindrical bore with a single-sided countersink (40°–60°) — ensures secure fastening and correct seat alignment when paired with the recommended clamping hardware. Application focus: turning non‑ferrous and delicate components Intended primarily for turning, this insert performs best in finishing, profiling and light to medium machining of non‑ferrous materials where reduced cutting forces and clean finishes are essential. The combination of uncoated carbide and precise geometry reduces built-up edge and supports consistent results on delicate workpieces; selecting the appropriate chipbreaker and cutting data will maximise process security and surface quality. Contact Metav Werkzeuge for tailored advice on holder selection and cutting parameters for the Tungaloy TH10 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to match the insert to machining conditions. Technical data Article number: 6807645 SKU: 6807645-Tungaloy Manufacturer SKU: TUN6807645 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts ISO code: 110200 Thickness: 2.38 mm Size: 11 mm Relief angle: 7° Included angle: 60° Special features Shape: triangular Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: single-sided Grade: TH10 uncoated carbide Application: turning (external and internal) Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ Which materials is this insert best suited for? The TCGT110200 TH10 insert from Tungaloy is optimised for non‑ferrous and easily machined materials where a sharp, uncoated edge reduces cutting forces and improves surface finish. How is holder compatibility ensured for this insert? Compatibility depends on matching the insert form, 7° relief angle, size 11 mm, thickness 2.38 mm and clamping method to the holder; the ISO 110200 code aids correct selection. Is this insert suitable for heavy roughing? The TH10 uncoated grade is primarily intended for finishing and light to medium machining; for heavy roughing a wear‑resistant, coated grade would be more appropriate. How does the hole and countersink influence clamping? The cylindrical hole with a single‑sided countersink (40°–60°) provides precise seating and reliable clamp engagement when used with the correct screw and pad, improving repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110201 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH725 carbide grade, compact ISO geometry and secure hole clamping for consistent component quality and high process reliability; order original stock via Metav Werkzeuge or consult the technical team for holder compatibility and availability. TCGT 110201 AH725 ISO turning insert — Tungaloy, triangular 60° form A TCGT110201 AH725 indexable turning insert for ISO-conform external and internal turning, engineered for versatile machining of Stahl and rostfreier Stahl with a one-sided chipbreaker and centring hole. TCGT 110201 triangular ISO insert PVD-coated AH725 carbide grade 0.1 mm corner radius, 7° clearance One-sided chipbreaker with centring hole Productivity and consistent cutting performance for mixed materials The PVD-coated AH725 grade is a universal, chip-resistant carbide solution that balances tool life and edge stability when machining different steels. The 60° triangular geometry delivers predictable cutting engagement, while the 0.1 mm corner radius supports profile accuracy on small features. Together, these characteristics reduce unexpected tool changes and increase machine uptime, making the insert a rational choice where consistent cycle times and repeatable surface finish are required. Secure clamping and ISO compatibility for straightforward toolset-up Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the insert’s with hole design and the cylindrical hole plus single-side countersink (40°–60°) permit reliable seating and torque control in standard ISO holders. The 7° clearance reduces rubbing on re-entrant surfaces and the one-sided chipbreaker improves chip control for common turning strategies. This combination simplifies assembly of the ISO insert–holder system and reduces process variation during batch production. Application fit, process reliability and practical advantages The AH725 grade is particularly suitable for applications with varying workpiece materials and for smaller tooling where process security is a priority. The insert supports both external and internal turning operations and integrates into a system comprising a matched holder, support pad/clamp set and replacement screws. For production environments seeking a predictable balance between wear resistance and fracture toughness, this insert provides a pragmatic compromise that helps maintain throughput and surface quality. Contact Metav Werkzeuge for stock queries and tailored toolholder compatibility advice on Tungaloy inserts; technical consultants are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6857022 Manufacturer SKU: TUN6857022 SKU: 6857022-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Brand: Tungaloy Data Corner radius: 0.1 mm Insert angle: 60° Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 11 mm Special features Triangular plate form PVD-coated AH725 carbide grade One-sided chipbreaker With hole: cylindrical hole + single-side countersink (40°–60°) ISO-compliant turning insert for external and internal turning Compatible with matched holder, support pad/clamp set and screws FAQ Is this insert suitable for machining stainless steels? Yes. The AH725 grade is designed as a universal, anti-chipping grade suitable for a range of materials including rostfreier Stahl and Stahl, offering a balance of wear resistance and toughness. How does the centring hole benefit clamping? The cylindrical hole with a single-side countersink ensures repeatable seating and secure clamping in ISO holders; this reduces micro‑movement and contributes to stable cutting conditions for the TCGT110201 AH725 insert. Which operations is the insert intended for? The insert is intended for external and internal turning applications; choose a matching holder and clamp set for the specific cutting strategy and workpiece geometry. What does the 0.1 mm corner radius mean for finishing? A 0.1 mm corner radius supports tight-profile features and improved edge strength; it helps achieve consistent surface finish while limiting the risk of chipping on interrupted cuts. How is holder compatibility determined? Holder compatibility depends on insert form, freedom/clearance angle, tolerance class, fastening method, size and thickness; check those parameters when selecting a mating ISO holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110201 J740 Wendeplatten - Tungaloy
Taking advantage of the J740 cutting-grade together with the 60° triangular ISO form and a 0.1 mm corner radius ensures consistent wear resistance, stable cutting-edge behaviour and reliable component quality; order the inserts directly via Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation TCGT110201 J740 indexable insert for Turning by Tungaloy — triangular ISO insert, 60° TCGT110201 J740 is an ISO-standard triangular insert conceived for external and internal turning in general turning operations, offering a balanced combination of wear resistance and edge stability ISO triangular insert 60° geometry Cemented carbide grade J740 0.1 mm corner radius, 2.38 mm thick Cylindrical hole with single-sided countersink Enhanced productivity through material and geometry The triangular ISO design with a 60° included angle and the J740 cutting material provide a rational path to higher productivity: the cemented carbide composition contributes to extended tool life and consistent metal removal rates, while the small 0.1 mm corner radius supports precise profile control. For operations where chip formation, cutting forces and tool life must be balanced, this geometry reduces flank wear and supports repeatable cycle times. The combination of grade and form is suitable where a compromise between wear resistance and edge toughness is required, thereby lowering the frequency of insert changes and reducing unplanned downtime. Accurate clamping and mounting for repeatable results Designed to the ISO standard, the insert’s 2.38 mm thickness and central cylindrical hole with a single-sided countersink (40°–60°) ensure consistent seating in compatible holders. The specified 7° relief angle helps to avoid rubbing while maintaining a secure fit under cutting loads, which minimises vibration and contributes to improved surface finish. By choosing holders that match the insert form, tolerance class and thickness, the machining system achieves precise repeatability and predictable cutting conditions — a decisive factor for process-stable production runs. Application guidance and material pairing Intended primarily for turning, this insert is used for both external and internal applications; the single-sided chipbreaker requires selection according to workpiece material and machining conditions. The Tungaloy grade complements the geometry by delivering a balance of wear resistance and edge stability, suitable for a broad range of steels and general workshop materials. For best results, match the chipbreaker and insert grade to the workpiece, machining strategy and machine rigidity. If additional technical data or advice on holder compatibility is required, Metav Werkzeuge can provide tailored recommendations and further process parameters to support reliable machining. For detailed holder recommendations or immediate delivery options for Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and fast assistance Technical data Article number: 6807649 SKU: 6807649-Tungaloy Manufacturer SKU: TUN6807649 Numbers / Core data Insert designation: TCGT110201 Size: 11 mm Thickness: 2.38 mm Corner radius: 0.1 mm Relief angle: 7° Included angle: 60° Features / Specialities Material: cemented carbide Cutting-grade: J740 (Tungaloy) Plate shape: triangular Chipbreaker: one-sided Hole: cylindrical hole + single-sided countersink (40°–60°) ISO-standard geometry for turning applications Compatibility with suitable external holders and boring bars FAQ What is the primary application for this insert? The insert is designed for turning operations; the TCGT110201 J740 insert by Tungaloy serves both external and internal turning tasks where balanced wear resistance and edge stability are required. Which materials is the J740 grade best suited to machine? The J740 grade in this insert is formulated to deliver a compromise of wear resistance and toughness, making the insert suitable for a wide range of steels and general turning materials under stable machining conditions. How does the hole and countersink design affect mounting? The cylindrical hole with a single-sided countersink provides secure seating and consistent clamping in compatible holders, improving repeatability and reducing the risk of insert movement during cutting. Can the insert be used with any holder? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; selecting a holder that matches these parameters ensures correct seating and reliable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110201 J740 Wendeplatten - Tungaloy
Take advantage of the proven combination of J740 Tungaloy carbide grade, ISO compatibility and precise geometry for steady chip control and extended tool life; order the insert directly via Metav Werkzeuge or request tailored holder recommendations from our consultants. TCGT 110201 J740 Tungaloy indexable turning insert for turning A TCGT110201 J740 indexable insert engineered for ISO-standard external and internal turning, offering a balanced mix of wear resistance and edge stability for productive machining. ISO-standard triangular insert 11 mm J740 Tungaloy carbide grade for turning 0.1 mm corner radius with single-sided chipbreaker Cylindrical hole with one-sided countersink 40°–60° Engineered for consistent turning performance The triangular ISO insert delivers predictable cutting behaviour thanks to its J740 carbide composition and an optimised chip control geometry. The combination of wear resistance and toughness in this grade supports longer cutting intervals and stable edge condition, which translates into fewer tool changes and improved uptime. With a 60° insert angle and 7° clearance, the geometry is suited to a wide range of external and internal turning tasks, maintaining surface quality while enabling efficient material removal. The balanced design favours consistent chip formation and reduces the risk of unexpected breakouts under moderate to heavy cutting conditions. Secure clamping and precise dimensions for repeatability Repeatable setup is achieved by the insert's hole and seating features: a cylindrical hole with an integrated one-sided countersink (40°–60°) ensures firm clamping and accurate positioning in compatible holders. The 11 mm size, combined with a 2.38 mm thickness, gives sufficient rigidity for stable turning operations when used with an appropriate holder or boring bar. The small 0.1 mm corner radius with a single-sided chipbreaker supports fine edge control and gradual engagement, which helps to protect the cutting edge and improve dimensional accuracy. Compatibility with ISO holders is determined by shape, clearance angle, tolerance class, fastening method, size and thickness, enabling straightforward integration into existing tool systems. Versatile grade selection for mixed material processing The Tungaloy J740 grade is formulated to handle a broad spectrum of materials encountered in machining environments, delivering stable chip formation and good cutting-edge life. For workshops processing steels, alloyed steels and common ferrous materials, this grade offers a practical balance of performance and economy. The single-sided chipbreaker is tuned to the insert geometry to support efficient chip evacuation in turning operations, reducing rework and enhancing cycle consistency. For specific material mixes or cutting parameter optimisation, technical specifications and recommendations can be provided to ensure the insert selection matches production goals and machine capability. For reliable performance with the J740 grade and professional holder compatibility advice, contact Metav Werkzeuge to confirm availability and receive tailored recommendations for your turning setup. Technical data Article number: 6807652 Manufacturer SKU: 6807652-Tungaloy Insert designation: TCGT110201 Size: 11 mm Thickness: 2.38 mm Corner radius: 0.1 mm Clearance angle: 7° Insert angle: 60° Material: carbide Grade: J740 Shape: triangular Hole: cylindrical hole with one-sided countersink (40°–60°) Application: turning Numbers / Core technical data 11 mm insert size 2.38 mm plate thickness 0.1 mm corner radius 7° clearance 60° included angle Special features ISO-standard indexable turning insert series Single-sided chipbreaker Tungaloy carbide grade J740 Compatibility depends on shape, clearance angle, tolerance class, fastening, size and thickness Suitable for external and internal turning with appropriate holders FAQ What materials is this insert suitable for? The TCGT110201 J740 Tungaloy indexable insert is designed for a broad range of materials commonly encountered in turning; the J740 grade provides balanced wear resistance and toughness for steels and similar ferrous materials. How does the chipbreaker affect performance? The single-sided chipbreaker on the insert promotes controlled chip formation and evacuation during turning, which helps maintain surface finish and prolong cutting-edge life for the TCGT110201. Which holders are compatible with this ISO insert? Compatibility is determined by the holder form, clearance angle, tolerance class, fastening method, size and thickness; the TCGT110201 fits ISO-standard triangular holders that accept an 11 mm insert with a 2.38 mm thickness. What is the function of the countersunk hole? The cylindrical hole with one-sided countersink (40°–60°) enables secure clamping and accurate seating in the toolholder, ensuring repeatable positioning and reduced vibration for the TCGT110201 insert. Is the corner radius suitable for finishing operations? The 0.1 mm corner radius provides a fine edge for good surface quality and is appropriate for light to medium finishing cuts when using the J740 grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110201 SH7025 Tungaloy Wendeplatten - Tungaloy
Benefit from a robust combination of coated carbide SH7025 and a compact triangular geometry that delivers consistent edge stability and reliable process security in turning operations. Choose matching holders and clamping hardware to ensure compatibility, then order directly via Metav Werkzeuge or consult our team for selection support. TCGT110201 SH7025 – ISO triangular turning insert (0.1 mm radius, 60°) by Tungaloy TCGT110201 SH7025 is an ISO-standard triangular indexable insert for general turning, engineered for stable cutting performance in varying engagement conditions and for use with compatible ISO toolholders ISO triangular insert TCGT110201 Coated carbide grade SH7025 0.1 mm corner radius, 60° included angle High edge stability for variable turning conditions The combination of coated carbide composition and the SH7025 grade delivers high fracture resistance and stable cutting edges under fluctuating loads. This insert is designed to maintain dimensional consistency where engagement and chip thickness change, reducing the need for frequent index changes. The relatively tough substrate of the grade improves resistance to micro-chipping, which supports longer uninterrupted runs and contributes to predictable tool life and lower process variation. Quick integration with ISO tooling and secure clamping Compliance with ISO form and size standards ensures straightforward interchangeability with matching external holders and boring bars when the correct relief angle and tolerance class are observed. The triangular geometry with a 60° included angle and a 7° relief angle requires a compatible pocket and clamping arrangement; compatibility is determined by form, free angle, tolerance class, fastening method, size and thickness. The insert’s central hole and countersink design aid reliable clamping, reducing risk of movement and enabling faster tool changes to minimise downtime. Controlled chip formation and application guidance for turning tasks A single-sided chipbreaker optimises chip control for typical turning cuts, while the 0.1 mm corner radius supports fine surface finishes and smaller depth-of-cut operations. The plate thickness of 2.38 mm increases bending stiffness compared with thinner grades, so small tools gain better stability. Intended for both external and internal turning, the insert works best when the chipbreaker and grade selection match the workpiece material and machining parameters; select the chip geometry and SH7025 grade for a balance of surface quality and process robustness. For application advice, grade selection or rapid supply of Tungaloy TCGT110201 SH7025 turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data Article number: 6967540 SKU: 6967540-Tungaloy Manufacturer SKU: TUN6967540 Brand: Tungaloy Material: carbide Core data Designation: TCGT110201 Included angle: 60° Relief (free) angle: 7° Corner radius: 0.1 mm Plate thickness: 2.38 mm Size: 11 mm Special features Coated carbide grade SH7025 Triangular plate form With central hole; cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Application: Turning; compatible with ISO toolholders when geometric parameters match FAQ Which turning tasks suit this insert best? TCGT110201 SH7025 is intended for general external and internal turning where a tough, edge-stable coated carbide insert is required; its construction favours small tools and variable engagement conditions. How is holder compatibility ensured? Compatibility depends on the insert form, free angle (7°), tolerance class, fastening method, size and thickness; a correctly matched ISO holder or boring bar secures the insert reliably. What chip control can be expected? The single-sided chipbreaker built into the insert promotes controlled chip formation for typical turning feeds, improving surface finish and evacuation. What are the mounting details of the insert? This insert includes a central cylindrical hole with a one-sided countersink (40°–60°) to allow secure clamping in compatible ISO pockets and secure fastening. What finish and cutting conditions suit a 0.1 mm corner radius? The 0.1 mm radius on TCGT110201 is suitable for finishing passes and fine turning where modest depths of cut and improved surface integrity are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110201 SH7025 Wendeplatten - Tungaloy
Take advantage of a robust combination of consistent cutting performance, versatile compatibility and reliable tool life for smooth turning operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. TCGT110201 SH7025 Tungaloy indexable turning insert (ISO 110201) for turning TCGT110201 SH7025 is an ISO‑standard indexable turning insert engineered for external and internal turning operations where stable edge retention and flexible cutting conditions are required. ISO TCGT 110201 format Coated cemented carbide SH7025 7° clearance angle for stable cutting Triangular 11 mm size with 0.1 mm radius Consistent productivity through a tough coated grade The coated cemented carbide grade SH7025 is formulated for toughness and edge stability, making it particularly suitable for inserts used in smaller tools or where engagement conditions vary. This combination reduces the risk of unexpected edge chipping under fluctuating depths of cut and supports steady metal removal rates. The improved durability of the coating helps to extend tool life, which in turn reduces downtime for insert changes and supports a more predictable production rhythm. Clear chip control and straightforward turning benefits A single-sided chipbreaker on the insert simplifies chip formation and evacuation, which is essential during both external and internal turning tasks. By promoting controlled chip breaking, the insert lowers the chance of long, entangling chips that could impair surface finish or damage fixtures. The 0.1 mm corner radius helps balance strength at the cutting edge with the ability to achieve neat contours; this radius supports robust cutting without compromising dimensional accuracy on turned components. Secure mounting and compatibility for precise set‑ups The insert’s ISO TCGT110201 geometry and the specified 7° clearance angle determine compatibility with the appropriate holder: form, clearance, tolerance class, fastening, size and thickness all matter for a secure fit. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) to suit common clamping systems, and the 2.38 mm plate thickness contributes to stable seating under load. Selecting a matched clamping set and replacement screws as part of the tool system ensures repeatable positioning and consistent machining results. For robust, reliable turning with Tungaloy’s SH7025 grade, contact Metav Werkzeuge for availability and technical consultation: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: 6967518 SKU: 6967518-Tungaloy Manufacturer SKU: TUN6967518 Brand: Tungaloy Facts Size: 11 mm Thickness: 2.38 mm Corner radius: 0.1 mm Clearance angle: 7° Insert angle: 60° ISO code: 110201 Design and features Coating / grade: SH7025 Material: cemented carbide Shape: triangular Chipbreaker: single-sided Hole: with hole; cylindrical hole + single-side countersink (40°–60°) Application: turning (external and internal) Model series: ISO turning inserts Compatibility determined by form, clearance angle, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The insert in TCGT110201 SH7025 is designed for general turning and offers a broad material coverage thanks to its tough SH7025 grade, making it suitable for many steels and mixed cutting conditions. How does the single‑sided chipbreaker affect machining? A single‑sided chipbreaker on the insert promotes predictable chip formation and improved evacuation during turning, which assists in maintaining surface quality and avoiding chip entanglement. Which holders are compatible with this ISO insert? Compatibility is governed by the insert form and dimensions; the ISO TCGT110201 geometry, 7° clearance angle and hole/countersink configuration require a matching ISO TCGT holder and correct clamping set. Can the 0.1 mm corner radius be used for finishing passes? The 0.1 mm radius provides a compromise between edge strength and the ability to achieve fine surface finishes; it is suitable for semi‑finishing and many finishing operations depending on cutting parameters. Is this insert intended for interrupted cuts or varying engagement? The SH7025 grade emphasises edge stability and toughness, which makes the insert appropriate for operations with variable engagement and smaller tooling arrangements that experience changing cutting conditions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110201 SH7025 Wendeplatten - Tungaloy
Benefit from the wear-resistant SH7025 grade and compact triangular geometry for consistent material removal and long tool life; the coated carbide construction and 7° relief ensure reliable performance across varied turning tasks. Order the TCGT110201 SH7025 indexable insert directly via Metav Werkzeuge or ask our consultants if technical advice is required. TCGT 110201 SH7025 – Tungaloy indexable insert for Turning (coated carbide, triangle) The TCGT110201 SH7025 is a triangle indexable insert for precision external and internal turning, designed for ISO clamping systems and versatile machining conditions. Coated carbide SH7025 for stable cutting edges ISO triangle insert TCGT 110201 for turning 7° relief angle for controlled chip flow 0.1 mm corner radius for versatile finishing Consistent metal removal and extended tool life The combination of a coated carbide substrate and the SH7025 grade yields improved resistance to edge chipping under varying engagement conditions. The coating reduces built-up edge and supports higher productivity by maintaining a stable cutting edge over extended cycles, which in practice lowers tool change frequency and machine downtime. The modest 0.1 mm corner radius helps achieve good surface finish while allowing for slight tool deflection without immediate loss of dimensional control. Such a balance of wear resistance and edge stability supports cost-effective batch production and short-series turning alike. Seamless integration into ISO clamping systems Designed for the common ISO insert family, this triangular geometry provides three indexed cutting edges, improving economy per insert. Compatibility with a holder depends on form, relief angle, tolerance class, fixing method, size and thickness; the insert's 7° relief and 2.38 mm thickness are matched to standard external holders and boring bars. The central mounting feature is a cylindrical hole with a single-side countersink (40°–60°), enabling reliable clamping and repeatable seating. Specifying the correct toolholder and clamp ensures consistent chip control and repeatable positioning in automated or manual setups. Versatility for changing engagement and finishing requirements The single-sided chipbreaker design supports controlled chip formation in many turning scenarios while reducing the risk of tangling or unstable chips. The single-sided chipbreaker and triangular form make the insert particularly suitable for operations with changing depths of cut or intermittent engagement, where predictable chip behaviour is essential. For finishing passes the small nose radius provides fine surface quality; for roughing, the robust grade tolerates higher mechanical loads when paired with an appropriate holder and cutting parameters. The practical result is fewer interruptions and a steadier production rhythm. Confidence from a proven manufacturer Tungaloy's reputation for robust grades and consistent manufacturing tolerances underpins the insert's reliability during series production. The system approach — indexable insert, matched external holder or boring bar, backing/clamp set and spare screws — reduces setup uncertainty and supports fast replacements on the shop floor. For operations aiming at steady tool performance and repeatable component quality, the triangular ISO insert in SH7025 offers a pragmatic balance of economy and process stability. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts and compatibility with existing holders; call +49 2822 7131930 or email info@metav-werkzeuge.com for application-specific recommendations and prompt supply Technical data Article number: 6967526 SKU: 6967526-Tungaloy Manufacturer SKU: TUN6967526 Model series: ISO-Drehwendeschneidplatten Facts Insert size: 11 mm Thickness: 2.38 mm Corner radius: 0.1 mm Relief angle: 7° Included angle: 60° Design and special features Coating/grade: SH7025 Material: coated carbide Shape: triangle Hole: with hole; cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: Turning FAQ What holders are compatible with this triangular insert? Compatibility is determined by form, relief angle, tolerance class, fixing method, size and thickness; the TCGT110201 SH7025 fits standard ISO triangle holders matched to an 11 mm size and 2.38 mm thickness. How many cutting edges are available per insert? The triangular shape provides three indexed cutting edges, allowing economical rotation of the indexable insert as edges are reconditioned or worn. Which machining tasks is the grade SH7025 best suited to? The SH7025 coated grade is intended for stable cutting-edge performance in turning, especially useful with smaller tools or where engagement conditions change frequently. Does the insert include a countersink or specific hole form for clamping? Yes, the insert features a cylindrical hole with a single-side countersink (40°–60°) to ensure secure and repeatable clamping in compatible holders. Is the chipbreaker suitable for finishing passes? The single-sided chipbreaker combined with a 0.1 mm corner radius supports good surface finish on final passes while still offering controlled chip formation in heavier cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110201 SH725 Wendeplatten - Tungaloy
TCGT 110201 SH725 Tungaloy Wendeplatte – Drehwendeschneidplatte für Drehen TCGT110201 SH725 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen mit zäher, schneidkantenstabiler Sorte Dreiecksplattendesign, 11 mm Seitenlänge Eckenradius 0,1 mm für feine Konturen Beschichtungssorte SH725, zähe Schneidkante Mit Loch und einseitiger Senkung (40°–60°) Plattendicke 2,38 mm, kompatibel zu ISO-Haltern Präzise Leistung für produktive Zerspanung Die Wendeplatte bietet konstante Schnittbedingungen bei wechselnden Eingriffsradien und instabilen Halterbedingungen. Durch die Kombination aus SH725-Sorte und beschichtetem Hartmetall entsteht eine zähe Schneidkante, die Rissbildung reduziert und so die Standzeit erhöht. Anwender profitieren von planbaren Werkzeugwechselintervallen und gleichbleibender Teilequalität, was Rüstzeiten reduziert und die Produktivität in der Fertigung steigert. Materialeigenschaften und Standzeitvorteile Dank des beschichteten Hartmetall-Trägers bleibt die Schneidkante auch bei unterbrochenem Schnitt widerstandsfähig. Die Sorte eignet sich speziell für kleinere Platten und wechselnde Schnittbedingungen, weil sie zähes Verhalten mit hoher Kantenstabilität verbindet. Daraus folgt weniger Werkzeugverschleiß bei Schnittschwankungen und damit geringere Ersatzteilkosten für Werkstatt und Produktion. Einsatzbereiche und Werkstoffkompatibilität Die Platte wurde primär für das Drehen entwickelt und eignet sich für Außen- und Innendreharbeiten mit unterschiedlichen Werkstoffen. Durch die einseitige Spanformer-Geometrie lassen sich Späne kontrolliert abführen, was die Bearbeitung von verformungsempfindlichen Werkstoffen erleichtert. Anwender in Kleinserienfertigung und Instandhaltung finden hier eine robuste Lösung für variable Aufspann- und Schnittbedingungen. Kompatibilität, Montage und Handhabung Die ISO-Norm der Platte sichert die Kompatibilität zu gängigen Außenhaltern und Bohrstangen, wobei Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke zu prüfen sind. Mit Loch und zylindrischem Loch mit einseitiger Senkung (40°–60°) ist die Befestigung einfach und wiederholgenau. Der Freiwinkel von 7° und der Winkel von 60° unterstützen stabile Schneidbedingungen bei vielfältigen Einstellwinkeln. Kontaktieren Sie Metav Werkzeuge für Beratung zur Tungaloy-Wendeplatte und zur technischen Auswahl anhand der Fertigungsbedingung — eMail: info@metav-werkzeuge.com; Telefon: +49 2822 7131930 Technische Daten Artikelnummer: 6838679 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten SKU Hersteller: TUN6838679 Fakten Eckenradius: 0,1 mm Winkel: 60° FreiWinkel: 7° Plattendicke: 2,38 mm Plattengröße: 11 mm Besonderheiten Material: Hartmetall Sorte: SH725 (zäh, schneidkantenstabil) Schneidstofftyp: beschichtetes Hartmetall Plattenform: dreieckig Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Aufgaben erfüllt die TCGT110201 SH725 Tungaloy-Wendeplatte am besten? Die TCGT110201 SH725 Tungaloy-Wendeplatte ist optimiert für Außen- und Innendrehen mit wechselnden Eingriffsbedingungen; die SH725-Sorte sorgt für zähe Schneidkante und stabile Spanbildung, was besonders bei unruhigen Aufspannverhältnissen Vorteile bringt. Ist die Platte mit Standard-ISO-Haltern kompatibel? Ja, die Platte entspricht ISO-Normen und passt zu gängigen Außenhaltern, sofern Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke übereinstimmen; bei Bedarf hilft Tungaloy-Spezifikation oder die Angabe SKU 6838679-Tungaloy zur schnellen Zuordnung. Für welche Werkstoffe eignet sich die Wendeplatte? Die Kombination aus beschichtetem Hartmetall und SH725-Sorte macht die Platte universell einsetzbar; sie bietet gute Performance bei Stahl, legierten Werkstoffen und weniger stabilen Bauteilen, wobei die Spanformerwahl an den Werkstoff anzupassen ist. Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius 0,1 mm ermöglicht feine Konturen und geringere Schnittkräfte bei detailreichen Bearbeitungen; für grobe Abträge wären größere Radien zu wählen, bei denen die SH725-Sorte weiterhin Stabilität bietet. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCGT 110201 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a tough, edge-stable SH725 grade, precise 60° triangular geometry and reliable clamping for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TCGT110201 SH725 — ISO turning insert (triangular, 60°) by Tungaloy A Tungaloy TCGT110201 SH725 ISO turning insert designed for external and internal turning, offering a robust coated cemented carbide grade for stable cutting under variable engagement conditions. Coated cemented carbide SH725 grade Triangular 60° insert, 11 mm size Single-sided chipbreaker for stable cutting Countersunk hole for secure clamping Durable grade for prolonged cutting life and fewer tool changes The coated cemented carbide construction and SH725 specification deliver a blend of toughness and edge stability suitable for dynamic turning tasks. In practice this means fewer unexpected flank failures and reduced tool change frequency, which supports continuous production cycles. The coating enhances wear resistance on the cutting face while the substrate maintains fracture resistance, creating a balance between lifetime and reliability that is especially valuable on smaller holders or when cutting conditions vary. Geometry and clamping that ensure repeatable positioning The triangular form with an included angle of 60°, an inscribed size of 11 mm and a corner radius of 0.1 mm gives defined cutting contact and consistent engagement. At 2.38 mm thickness, the insert offers sufficient rigidity for typical finishing and light to medium turning tasks. The cylindrical hole with a single-side countersink (40°–60°) ensures secure and repeatable clamping when paired with the correct ISO holder, reducing runout and supporting dimensional consistency across batches. Single-sided chipbreaker tailored for stable chip control Equipped with a single-sided chipbreaker, the insert promotes predictable chip formation and evacuation in many turning scenarios. This improves surface finish and minimises the risk of chip entanglement, which is particularly beneficial when machining longer parts or when coolant flow is restricted. Selecting a matching chipbreaker and grade for the workpiece material helps to maintain productivity and protect the cutting edge. System compatibility and straightforward integration in production The insert is built to ISO norms and is intended for use within a system comprising a matching external holder or boring bar, support plate/clamp set and replacement screws. Compatibility depends on shape, clearance angle, tolerance class, fastening method, size and thickness, so correct pairing with the holder is essential for optimal performance. The design is therefore well suited to organised tooling systems where repeatability and quick insert changes are required. For applications demanding edge stability and secure clamping, request the Tungaloy SH725 inserts from Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations. Technical data Article number: 6737142 Manufacturer SKU: TUN6737142 SKU: 6737142-Tungaloy ISO designation: TCGT110201 Facts Size (inscribed): 11 mm Thickness: 2.38 mm Included angle: 60° Clearance angle: 7° Corner radius: 0.1 mm Shape: Triangular Special features Grade/coating: SH725 Material: Cemented carbide Hole type: Cylindrical hole with single-side countersink (40°–60°) Chipbreaker: Single-sided Intended use: External and internal turning System components: Insert, compatible holder, clamp set and screws FAQ What turning operations is this insert suitable for? This insert is intended for external and internal turning operations and performs well in finishing and light to medium cutting tasks when used in the correct holder. How does the SH725 grade affect performance? The SH725 grade provides a tough, edge-stable combination that improves resistance to chipping under variable engagement while the coating enhances wear resistance for longer tool life. Which holders are compatible with this ISO insert? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening style, size and thickness; the TCGT110201 must be matched to an ISO-compatible external holder or boring bar with the correct clamp and screw arrangement. What benefits does the single-sided chipbreaker provide? The single-sided chipbreaker offers predictable chip control and evacuation, which helps to improve surface finish and reduce the risk of chip-related interruptions. What are the key dimensions to check before ordering? Check the inscribed size (11 mm), thickness (2.38 mm), corner radius (0.1 mm), included angle (60°) and the hole/countersink configuration to ensure correct clamping and fit Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110201 SH725 Wendeplatten - Tungaloy
Take advantage of the SH725 grade’s edge stability and the ISO‑compliant geometry for consistent productivity; order directly via Metav Werkzeuge or request application advice from the consultants for secure integration into existing tool systems. TCGT110201 SH725 – Indexable turning insert (ISO 110201) for turning by Tungaloy The TCGT110201 SH725 is an ISO‑standard indexable turning insert intended for external and internal turning, offering a robust cutting grade for small tools and variable engagement conditions Coated cemented carbide grade SH725 ISO triangular 60° insert, size 11 0.1 mm corner radius for fine finishing Cylindrical hole with single‑side countersink Productivity through reliable edge stability The SH725 coating and cemented carbide substrate combine to provide a stable cutting edge that reduces unexpected tool changes and improves process uptime. The grade is engineered for consistent chip control and resilient performance under varying engagement, which translates into fewer interruptions and predictable tool life. In practical terms, this means enhanced throughput on short‑run batches and more reliable cycle times in mixed production environments. Simple integration with ISO tool systems As an ISO‑standard insert, compatibility with holder systems is determined by form, clearance angle, tolerance class, fastening, size and thickness. The insert is designed for straightforward assembly with an appropriate external holder or a boring bar; the complete system typically comprises an insert, holder, shim and clamping set plus replacement screws. Clear specification of the ISO code 110201 and geometry ensures predictable fitment and repeatable positioning in modern toolholders. Controlled surface finish and chip behaviour The small 0.1 mm corner radius supports fine finishing passes and reduces cutting forces during light cuts, improving surface quality without sacrificing stability. The single‑side chipbreaker is tuned for effective chip formation and evacuation in turning operations; this reduces the risk of re‑cutting and helps maintain consistent surface appearance. For customers less familiar with insert design, the corner radius determines the blend between strength and finish: smaller radii favour finishing, larger radii favour roughing. Recommended applications and selection guidance Intended for turning, the insert is especially suitable for operations where toolholder stability varies or where small‑tool setups are used. Select the chipbreaker and grade to match the workpiece, machining strategy and clamping rigidity. The system approach — insert, matching holder or boring bar, shim/clamp and screws — allows adaptation to diverse turning tasks while maintaining the advantages of an ISO‑based modular system and the proven behaviour of the SH725 cutting grade. For reliable, process‑stable turning choose Tungaloy SH725 inserts and contact Metav Werkzeuge for application consultation and availability via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Manufacturer article number: 6737031 Manufacturer SKU: TUN6737031 Metav SKU: 6737031-Tungaloy Model series: ISO turning indexable inserts ISO code: 110201 Facts Insert geometry: 60° Clearance angle: 7° Thickness: 2.38 mm Size: 11 Corner radius: 0.1 mm Special features Coated cemented carbide, grade SH725 Triangular plate form Single‑side chipbreaker With hole; cylindrical hole + one‑side countersink (40°–60°) Intended use: external and internal turning System components: insert, external holder/boring bar, shim/clamp set, replacement screws Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What is the main benefit of the SH725 grade for turning? The SH725 grade delivers a stable cutting edge and robust chip control for turning applications; the TCGT110201 SH725 insert is optimised for consistent performance with small tools and variable engagement. Which toolholders fit this insert? Holders and boring bars that accept ISO‑110201 triangular inserts and match the form, clearance angle and thickness accommodate the TCGT110201 SH725 insert. How does the 0.1 mm corner radius affect the surface finish? A 0.1 mm corner radius supports fine finishing operations by lowering cutting forces in light cuts, resulting in improved surface quality compared with larger radii. Is the insert supplied with clamping hardware? The product is part of a system approach; typical delivery includes the insert itself, while appropriate holders, shims, clamping sets and replacement screws are specified separately according to application needs. What does the hole style mean for mounting? The cylindrical hole with one‑side countersink (40°–60°) secures repeatable positioning and stable clamping when used with compatible screws and clamps. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110201 SH725 Wendeplatten - Tungaloy
Reliable machining performance results from the combination of the SH725 coated carbide grade, a 7° clearance geometry and a precise 0.1 mm corner radius. The ISO triangular design with a cylindrical hole and one‑side countersink ensures secure clamping and straightforward integration into ISO holders. Order the insert directly via Metav Werkzeuge or ask the consultants if holder compatibility needs checking. TCGT 110201 SH725 ISO triangular turning insert for turning — Tungaloy The TCGT110201 SH725 is an ISO‑standard triangular turning insert designed for external and internal turning operations where edge stability and repeatable clamping are essential. Coated carbide grade SH725 for edge stability Triangular ISO insert, 11 mm with 60° geometry 7° clearance and 0.1 mm corner radius Cylindrical hole with single-side countersink Productive turning with proven edge stability The coated carbide grade SH725 delivers consistent cutting performance in a range of turning tasks, providing stable chip formation and extended edge life even under varying engagement conditions. As a result, machining cycles run with fewer interruptions and tool changes, which improves overall shop-floor productivity. This insert is particularly suited to smaller toolholders and applications that require predictable tool behaviour under variable loads. Precise geometry for reliable clamping and repeatability The ISO‑standard triangular geometry with an included angle of 60°, a size of 11 mm and a plate thickness of 2.38 mm offers precise seating in compatible holders. The combination of a 7° clearance and a 0.1 mm corner radius helps maintain dimensional accuracy while reducing the risk of edge chipping. Compatibility is determined by form, clearance, tolerance class, fixation, size and thickness, so selecting matching clamping components ensures repeatable part quality and rapid index changes. Practical integration and process security for turning systems Featuring a cylindrical hole with a single‑side countersink (40°–60°) and a single‑sided chipbreaker, the insert is easy to fasten securely and helps control chips during external and internal turning. The system composition—indexable insert, suitable external holder or boring bar, shim/clamp set and spare screws—facilitates quick replacements and lowers machine downtime. For workshops seeking both consistency and flexibility in turning processes, this design supports productive, reliable machining across a wide material range. Contact Metav Werkzeuge for tailored advice on Tungaloy SH725 inserts and to confirm holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737032 Manufacturer SKU: TUN6737032 Model series: ISO turning indexable inserts Material: carbide Coating / grade: SH725 Designation: TCGT110201 Dimensions & angles Insert size: 11 mm Thickness: 2.38 mm Corner radius: 0.1 mm Clearance angle: 7° Included angle: 60° Hole style: cylindrical hole + one‑side countersink (40°–60°) Design & special features Triangular insert form Single‑sided chipbreaker Coated carbide insert suitable for turning With hole for secure clamping Compatible with ISO holders when form, clearance and tolerance match Typical system: insert, holder/boring bar, shim/clamp set, spare screws FAQ What materials can this insert machine effectively? The TCGT110201 SH725 insert (Tungaloy, SKU TUN6737032) is a coated carbide grade designed for a broad range of turning tasks; material suitability depends on the chosen chipbreaker and cutting parameters. How does the chipbreaker influence performance? The single‑sided chipbreaker on this Tungaloy turning insert improves chip control in common turning operations, helping to maintain surface finish and safe chip evacuation. Which holders are compatible with this ISO insert? Compatibility requires matching the insert form, clearance angle, tolerance class, fixation method, size and thickness; the TCGT110201 SH725 fits standard ISO triangular holders meeting those criteria. Can the insert be used for internal turning? Yes, the insert is intended for both external and internal turning; secure clamping via the cylindrical hole with countersink ensures stable performance during internal operations. What does the 0.1 mm corner radius mean for finished parts? A 0.1 mm corner radius helps produce a controlled edge on finished components, balancing tool strength and dimensional precision for many turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110201 SH730 Wendeplatten - Tungaloy
Benefit from precise chip control and the shock‑resistant SH730 grade together with ISO compatibility for predictable turning results; optimised for small‑tool and variable‑engagement operations. Order the TCGT110201 SH730 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT 110201 SH730 Tungaloy indexable turning insert — ISO triangular 60° insert for Turning A TCGT110201 SH730 indexable insert designed for ISO‑compliant external and internal turning, offering stable chip formation and reliable performance in compact tool setups. SH730 coated carbide grade for stable cutting ISO‑standard triangular insert, 60° geometry 0.1 mm corner radius for fine turning One‑sided chipbreaker with through hole Reliable chip control for consistent surface quality The combination of the SH730 coated carbide and a single‑sided chipbreaker gives consistently shaped chips and reduced tendency to build up on the cutting edge. This results in more stable cutting forces, which is particularly advantageous when using smaller toolholders or when engagement conditions change frequently. The coated substrate improves wear resistance while the chipbreaker geometry supports predictable evacuation, helping to maintain a steady surface finish during both external and internal turning operations. ISO compatibility for fast tool changes and predictable geometry As an ISO‑standard triangular insert with a 60° included angle, the part fits a broad range of common turning holders; compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness. The cylindrical hole with a single‑side countersink (40°–60°) ensures secure seating and repeatable indexing, reducing machine downtime. For workshops that need predictable set‑up times, this standardisation simplifies tool inventory and shortens changeover intervals. Precision edge and fine finishing for small turning tasks The small 0.1 mm corner radius delivers a balance between edge strength and the ability to achieve fine surface finishes on turned components. A modest radius minimises cutting forces for thin‑walled or delicate parts while still protecting the edge from chipping under variable engagement. The insert’s compact 11 mm size and 2.38 mm thickness make it suitable for confined or precision‑oriented turning tasks where controlled material removal and a good surface are priorities. Coated carbide grade and application guidance for reliable productivity The coated carbide substrate of the insert offers extended tool life across a wide material spectrum when matched with the appropriate chipbreaker and operating parameters. Intended for turning applications, the insert performs well with varying depths of cut and feed rates when used in conjunction with a correctly rated holder, backing pad and clamping set. For selection advice or specification checks, Metav Werkzeuge’s advisors can provide machining parameters and holder compatibility recommendations to optimise process reliability. For dependable results in compact turning operations choose the Tungaloy SH730 grade insert and contact Metav Werkzeuge for tailored application advice or procurement—email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6854027 Manufacturer SKU: TUN6854027 Vendor SKU: 6854027-Tungaloy Material: Hartmetall Grade: SH730 Model series: ISO‑Drehwendeschneidplatten ISO designation: TCGT110201 Dimensions & numbers Insert size: 11 mm Thickness: 2.38 mm Corner radius: 0.1 mm Relief angle: 7° Included angle: 60° Bezeichnung: TCGT110201 Design & features Triangular insert, 60° geometry Cylindrical hole + one‑side countersink (40°–60°) One‑sided chipbreaker Coated carbide grade SH730 ISO‑compliant for external and internal turning System: ISO insert + matching holder + backing/clamp set + replacement screws FAQ What materials is this insert suitable for? The TCGT110201 SH730 Tungaloy insert is a coated carbide grade intended for general turning tasks; the SH730 grade provides a balance of toughness and wear resistance suitable across a wide range of steels and mixed‑material applications when the correct chipbreaker and parameters are selected. How does the 0.1 mm corner radius influence the machining result? A 0.1 mm corner radius gives a fine edge for improved surface finish while retaining sufficient edge strength; the small radius helps reduce cutting forces on thin sections and is a common choice for finishing passes with the TCGT110201 insert. Is the insert compatible with standard ISO turning holders? Yes — the TCGT110201 follows ISO insert geometry and is compatible with holders that match the form, relief angle, tolerance class, clamping method, size and thickness specified by the ISO standard. What does the hole and countersink style mean for clamping? The cylindrical hole with a single‑side countersink (40°–60°) ensures positive, repeatable seating and stable clamping, which supports consistent indexing and reduces the risk of slippage during turning cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110201 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, low-force cutting edge and ISO‑standard fit for predictable turning operations; the uncoated TH10 grade delivers clean surfaces on non‑ferrous materials while the triangular form and precise 0.1 mm nose radius aid repeatability. Order via Metav Werkzeuge or contact our consultants for application advice and rapid supply. TCGT 110201 TH10 Tungaloy turning insert — triangular ISO turning insert for Drehen TCGT110201 TH10 Tungaloy turning insert is an ISO‑normed triangular insert for general turning, offering a sharp uncoated cutting edge and a single‑sided chipbreaker for clean, low‑force machining of non‑ferrous materials ISO TCGT insert, 11 mm triangular Uncoated cemented carbide, TH10 grade 0.1 mm nose radius for fine finishes Cylindrical hole with 40°–60° countersink High-efficiency cutting with a low‑force, clean edge The combination of a sharp, uncoated cutting edge and the TH10 carbide grade is tailored for operations where low cutting forces and excellent surface quality matter. This insert reduces the tendency for built‑up edge when machining aluminium and other non‑ferrous alloys, so internal and external turning can be completed with fewer secondary passes. The single‑sided chipbreaker controls chip formation while keeping the cutting forces modest, which supports stable feeds and reliable dimensional results. By favouring a clean shear rather than aggressive shearing, this geometry helps to maintain cycle times and decrease rework. Predictable fit and repeatable clamping for consistent production As an ISO‑standard turning insert, compatibility with holders depends on form, relief angle, tolerance class, clamping style, size and thickness — all of which are specified for reliable interchangeability. The triangular plate (inscribed circle 11 mm) with a 7° relief angle and 0.1 mm nose radius simplifies tool selection for common turning assemblies. The cylindrical hole with a one‑sided countersink (40°–60°) ensures stable seating in many clamping systems and aids repeatable orientation of the chipbreaker. These mechanical details translate into fewer indexing errors, less setup time and a steady process capability across batches. Application guidance and material suitability that improve output Designed principally for non‑ferrous work, the insert performs well where an uncoated edge provides superior finish and reduced cutting resistance. The grade is a sharp universal type: ideal for aluminium, brass and similar materials, and for operations where burr‑free, clean surfaces are required straight from the turning pass. Choosing an uncoated cemented carbide in these cases often prolongs tool life by avoiding coating delamination on soft alloys and facilitates a more predictable wear pattern. When stability and surface integrity are priorities, this approach supports higher first‑pass yields and improved overall productivity. Contact Metav Werkzeuge for tailored recommendations on holders and cutting parameters or to request the TCGT110201 TH10 for your turning application — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6807651 SKU: 6807651-Tungaloy Manufacturer SKU: TUN6807651 Model series: ISO turning inserts Material: cemented carbide Coating / grade: uncoated, TH10 Application: Turning Facts Inscribed circle (size): 11 mm Plate thickness: 2.38 mm Nose radius: 0.1 mm Relief angle: 7° Countersink angle: 40°–60° Special features Plate form: triangular Hole: cylindrical hole with one‑sided countersink Chipbreaker: one‑sided Sharp universal grade for non‑ferrous materials ISO‑standardised insert designation: TCGT110201 FAQ What materials is this insert best suited for? The TCGT110201 TH10 Tungaloy insert is designed primarily for non‑ferrous materials such as aluminium and brass, where an uncoated, sharp edge supports low cutting forces and clean surface finishes. How does the cylindrical hole with countersink affect clamping? The cylindrical hole with a one‑sided 40°–60° countersink provides secure seating and orientation in common clamping systems, improving repeatability and reducing indexing deviations during turning. Can this insert be used for internal and external turning? Yes, the triangular form and chipbreaker design make the insert suitable for both external and internal turning operations when the holder geometry and clamping match the ISO specification. What advantage does the TH10 uncoated grade provide over coated inserts? The uncoated TH10 grade offers a sharp, low‑force cutting edge that minimises built‑up edge on soft alloys and produces superior surface quality without the risk of coating delamination on non‑ferrous materials. Is the insert interchangeable with other ISO holders? Interchangeability is achieved when holders match the insert’s form, relief angle, tolerance class, clamping method, size and thickness; users should verify holder compatibility with the ISO designation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110201 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of precise cutting, low cutting forces and straightforward holder compatibility for dependable turning operations; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application support. TCGT110201 TH10 — Indexable Turning Insert for Turning, triangular ISO insert by Tungaloy TCGT110201 TH10 is an ISO-format triangular indexable insert designed for external and internal turning, offering a sharp universal grade for non-ferrous materials and applications requiring low cutting forces and clean surface finishes. ISO triangular insert, 11 mm size Uncoated carbide grade TH10 for low cutting forces 0.1 mm corner radius for fine surface finish Cylindrical hole with 40°–60° countersink High-efficiency turning with low cutting forces The TCGT110201 TH10 insert is an uncoated carbide solution developed for applications where reduced cutting forces and excellent surface quality are priorities. The TH10 grade is a sharp universal grade that supports machining of non-ferrous materials and similar workpieces; its edge geometry lowers power draw and helps to maintain dimensional accuracy on thin-walled components. For workshops seeking predictable results, the uncoated cutting edge delivers consistent engagement without the variable wear patterns introduced by some coatings, making it suitable for processes that demand repeatable, clean cuts. Secure mounting and ISO-based compatibility Compatibility with toolholders follows the ISO standard, but is determined by the insert form, 7° relief angle, tolerance class, fastening type, 11 mm size and 2.38 mm thickness. The triangular form with a cylindrical hole plus a one-sided countersink (40°–60°) ensures a positive location and reliable clamping in standard external holders or boring bars. This dimensional clarity enables straightforward replacement and minimises setup time when changing inserts, supporting efficient changeover in production environments where repeatability matters. Surface finish and process integration for shop floors A 0.1 mm corner radius on the insert yields a balance between edge strength and the ability to produce fine surface finishes on turned parts; combined with the single-sided chipbreaker, chip control can be matched to material, cutting parameters and machine stability. The insert integrates into a system comprising an ISO insert, a matching external holder or boring bar, an underlay/clamping set and replacement screws. For application-specific recommendations such as chipbreaker selection or adapting feeds and speeds to machine rigidity, Metav Werkzeuge supplies matching holders and technical guidance to align insert choice with process requirements. For genuine Tungaloy inserts and tailored holder recommendations, contact Metav Werkzeuge for precise product matching and procurement assistance Technical data Article number: 6807654 SKU: 6807654-Tungaloy Manufacturer article number: TUN6807654 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Angle: 60° Relief angle: 7° Corner radius: 0.1 mm Thickness: 2.38 mm Size: 11 mm ISO designation: 110201 Special features Grade: TH10 (uncoated) Shape: triangular Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: Turning System components: insert, holder/boring bar, underlay/clamp, replacement screws FAQ Is this insert suitable for non‑ferrous materials? The TCGT110201 TH10 insert from Tungaloy is a sharp universal grade designed specifically to perform well on non‑ferrous materials, delivering low cutting forces and clean surfaces in appropriate turning applications. Which factors determine holder compatibility for this insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, 11 mm size and 2.38 mm thickness; selecting a holder that matches the ISO interface and these dimensions ensures correct seating of the insert. Can this insert be used for internal turning operations? Yes, the insert is suitable for both external and internal turning when mounted in a compatible boring bar or internal holder configured for ISO triangular inserts. How does the 0.1 mm corner radius affect the machining result? The 0.1 mm corner radius provides a fine balance between edge strength and surface finish, supporting improved part appearance while maintaining adequate edge robustness under typical cutting conditions. What mounting features improve clamping reliability? The cylindrical hole with a one‑sided countersink (40°–60°) provides positive location and secure clamping when used with the correct underlay/clamp and screw set; this aids repeatability and reduces the risk of insert movement during cutting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110202 AH725 Wendeplatten - Tungaloy
Benefit from a universal, PVD-coated AH725 carbide grade combined with a 60° triangular form and a 0.2 mm corner radius for stable chip formation and reliable machining performance; order directly via Metav Werkzeuge or contact the consultants for tailored advice. TCGT110202 AH725 Tungaloy Turning Insert (TCGT 110202) — PVD-coated carbide, 60° triangular form A TCGT110202 AH725 Tungaloy turning insert engineered for external and internal turning, offering a single-sided chipbreaker and ISO-standard form for predictable cutting in mixed-material production environments PVD-coated AH725 grade for process security Universal use on steel and stainless steel 60° triangular form with 0.2 mm radius Central hole with cylindrical bore and countersink Consistent cutting performance for mixed materials The PVD-coated AH725 grade is a universal, break-resistant cutting material designed to perform across a wide range of steels and stainless steels. A PVD-coated surface increases resistance to abrasion and heat, which reduces flank wear and keeps the cutting edge sharper for longer. For workshops that process varying workpiece materials or work with compact tool assemblies, this grade delivers stable chip formation and fewer interruptions due to edge failure. The result is improved component consistency and lower unscheduled tool changes, supporting a more economical production flow. Geometry tuned for accuracy and repeatability The triangular insert geometry with a 60° included angle and a 0.2 mm corner radius provides a balance between edge strength and profile definition. A slight 7° clearance helps avoid rubbing while maintaining support under load. The insert’s thickness of 2.38 mm and standardised ISO form mean that compatibility with clamping systems depends on matching the insert form, clearance angle, tolerance class, fixing method, size and thickness. The central hole with a cylindrical bore and a one-sided countersink (40°–60°) enables secure seating and repeatable positioning when combined with the corresponding pad or clamp, minimising runout and helping to achieve consistent surface finishes. System approach for efficient handling and uptime As an ISO-standardised component, the indexable turning insert integrates into a system comprising the holder, support pad/clamp and fastening screws. This modular approach streamlines regrinding and replacement workflows and reduces inventory complexity: stock the insert, a matching external holder or boring bar and a set of spare screws to restore a tool assembly quickly. The indexable insert concept increases usable cutting edges per item and shortens changeover time, improving overall machine availability. For operations seeking predictable productivity, the combination of a proven carbide substrate and controlled PVD layering supports longer life and stable process parameters across batch production. For secure production with the AH725 grade and ISO TCGT form, contact Metav Werkzeuge for availability and expert consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 6857023-Tungaloy Manufacturer SKU: TUN6857023 Manufacturer article number: 6857023 Model series: ISO turning indexable inserts Material: Carbide Measurements & angles Insert size: 11 mm Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 60° Design & special features PVD-coated AH725 grade Single-sided chipbreaker Triangular insert with central hole Cylindrical bore + one-sided countersink (40°–60°) ISO form TCGT110202 Application: Turning (external and internal) FAQ What materials is this insert suited for? The TCGT110202 AH725 Tungaloy turning insert is intended primarily for steel and stainless steel; the AH725 grade is chosen for reliable, break-resistant performance across varying steels. How does the PVD coating affect tool life? A PVD-coated surface on the AH725 substrate enhances wear resistance and thermal stability, which typically extends effective cutting life and supports more consistent machining results. Which holder features are required for correct fitment? Compatibility is determined by the insert form, clearance angle, tolerance class, fixing method, size and thickness; the 60° triangular seat and central hole with countersink require a corresponding clamping pad and screw arrangement. How many cutting edges are available per insert index? The triangular geometry provides multiple usable edges per insert; rotating to a fresh edge restores cutting performance without regrinding, improving availability. Is this insert suitable for small-diameter tools or interrupted cuts? Yes; the AH725 grade and single-sided chipbreaker are designed to handle compact tool assemblies and variable cutting conditions, offering stable chip control in interrupted or unstable cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 J740 Wendeplatten - Tungaloy
Take advantage of the combination of balanced wear resistance, stable chip control, and ISO compatibility for reliable turning operations; order genuine Tungaloy inserts through Metav Werkzeuge or consult our team for matching holder and application advice. TCGT 110202 J740 Tungaloy turning insert for ISO triangular turning applications TCGT 110202 J740 is an ISO‑standard triangular turning insert designed for external and internal turning, offering a balanced carbide grade for dependable edge stability and controlled chip formation. ISO triangular insert TCGT 110202 J740 11 mm inscribed circle, 0.2 mm corner radius Carbide grade J740 for balanced wear and toughness Cylindrical hole with 40°–60° countersink Superior chip control and sustained cutting performance The combination of the J740 carbide grade and the single-sided chipbreaker is engineered to deliver consistent chip formation and extended edge life. This balance of wear resistance and toughness reduces unexpected tool changes and supports uninterrupted production runs, improving overall process efficiency. The insert’s geometry provides a repeatable cutting behaviour which helps maintain surface finish and dimensional accuracy across batch production. Secure clamping and ISO compatibility for versatile use Built to ISO specifications, the insert’s compatibility with a holder is determined by its form, clearance angle and thickness, ensuring proper seating and rigidity in most standard toolholders. The cylindrical hole with a one-sided countersink (40°–60°) enables secure fastening and reliable torque transfer during heavier cuts. The 7° clearance angle and 60° included angle contribute to stable engagement with the workpiece, reducing chatter and improving process stability. Geometry tuned for finishing and roughing in turning The triangular shape with an 11 mm inscribed circle and a 0.2 mm corner radius offers a compromise between edge strength and the ability to achieve fine surface finishes. A larger corner radius typically increases edge robustness for roughing, whereas a smaller radius favours fine finishing; the chosen radius here supports a range of operations when combined with the appropriate feed and depth of cut. The 2.38 mm thickness adds stiffness to the insert body, helping maintain positional accuracy under radial and axial loads. Practical benefits for workshop productivity Manufactured in cemented carbide, the insert is part of the ISO turning insert series and is suitable for standard turning tasks when matched with the correct chipbreaker and holder. The ISO designation and clear specification of the hole and countersink style simplify procurement and inventory management. Genuine Tungaloy carbide grades are developed to deliver predictable wear behaviour, which supports planning of tool change intervals and reduces downtime in the workshop. For genuine Tungaloy TCGT 110202 J740 inserts and expert application advice, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm stock and suitability for specific turning operations Technical data Article number: 6807665 Manufacturer SKU: TUN6807665 SKU: 6807665-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Drehen Facts Inscribed circle (IC): 11 mm Corner radius: 0.2 mm Thickness: 2.38 mm Clearance angle: 7° Included angle: 60° Special features Material: cemented carbide Grade: J740 Shape: triangular Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided ISO designation: 110202 Item name: TCGT110202 J740 Tungaloy‑wendeplatte FAQ What materials is this insert suited for? The TCGT 110202 J740 insert in cemented carbide is designed for general turning applications; selection of the J740 grade supports a wide material coverage when paired with the correct chipbreaker and cutting parameters. How does the corner radius affect performance? A 0.2 mm corner radius on the TCGT 110202 provides a balance between edge strength and surface finish, making it suitable for medium finishing passes while still offering some robustness for light roughing. Which toolholders are compatible with this ISO insert? Compatibility depends on the holder’s form, clearance, tolerance class, fastening method, size and thickness; the ISO designation and hole/countersink style of this insert facilitate matching with standard external holders and boring bars. Is the insert reversible and how many usable edges does it have? The triangular geometry typically provides three usable cutting edges; orientation and chipbreaker design determine the number of effective edges for a given operation. What is the benefit of the cylindrical hole with countersink? The cylindrical hole combined with a one‑sided countersink (40°–60°) ensures secure clamping and consistent seating, improving stability under load and reducing the risk of insert movement during interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 J740 Wendeplatten - Tungaloy
Benefit from wear resistance, stable cutting-edge performance and precise compatibility with ISO toolholders for reliable turning operations; order the Tungaloy TCGT110202 J740 insert directly via Metav Werkzeuge or consult our specialists for application advice. TCGT110202 J740 Turning Insert – ISO triangular, 60° by Tungaloy The TCGT110202 J740 is an ISO-standard triangular turning insert designed for external and internal turning, combining a robust carbide substrate with a one-sided chipbreaker for controlled swarf formation. ISO triangular format, 60° included angle Tungaloy J740 grade for wear resistance 0.2 mm corner radius for fine profiling Cylindrical hole with 40°–60° countersink Stable cutting performance for productive turning The indexable insert delivers consistent tool life through a balanced mix of hardness and toughness in the carbide substrate. The chosen grade provides improved edge stability under typical turning conditions, reducing unexpected tool changes and improving process reliability. With a 0.2 mm corner radius, the geometry supports fine profiling and repeatable dimensional results while the one-sided chipbreaker helps manage chip flow for uninterrupted production. ISO compatibility and secure clamping for quick tool changes Manufactured to ISO dimensions, the triangular geometry ensures compatibility with a wide range of external holders and boring bars; compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The insert’s cylindrical hole with single-sided countersink (40°–60°) simplifies clamping and repeatable positioning in the pocket. This system approach—insert, suitable holder, shim/clamp set and replacement screws—reduces setup time and supports a stable machining environment. Material grade explained: reliable carbide with J740 performance The carbide composition and the Tungaloy J740 designation combine wear resistance and sufficient toughness for general turning duties. This balance is especially relevant when machining a variety of steels and common ferrous alloys, where predictable flank wear and secure cutting edges translate into fewer interruptions and more consistent surface finishes. The substrate and grade selection aim to offer long tool life without sacrificing dimensional accuracy. Practical applications and handling recommendations Ideal for both external and internal turning, the insert works well where a controlled chip shape and stable edge are required. The 7° relief angle complements the triangular form for efficient cutting action, while the 11 mm size and 2.38 mm thickness suit standard ISO pockets for medium- to fine-pass operations. For best results, select a chipbreaker and grade matched to the workpiece material and machining stability; this keeps cutting forces consistent and optimises productivity. Contact Metav Werkzeuge today for technical guidance on integrating the Tungaloy TCGT110202 J740 insert into production or to check current availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6807662 SKU: 6807662-Tungaloy Manufacturer SKU: TUN6807662 Model series: ISO turning inserts Designation: TCGT110202 J740 Material: carbide Intended use: Turning Core data Insert size: 11 mm Thickness: 2.38 mm Corner radius: 0.2 mm Included angle: 60° Relief (free) angle: 7° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Special features Tungaloy grade J740 ISO triangular form Carbide substrate for wear resistance Compatibility determined by holder form and tolerances Suitable for external and internal turning System components: matching holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The Tungaloy TCGT110202 J740 insert is intended for general turning duties and performs well on common steels and typical ferrous alloys, benefiting from its balanced carbide grade for wear resistance and edge stability. How is the insert clamped in the toolholder? Clamping uses the insert’s cylindrical hole with a single-sided countersink (40°–60°); combined with an appropriately matched holder and clamp set, this ensures secure, repeatable seating. What does the J740 grade mean in practice? J740 denotes a Tungaloy carbide grade engineered to balance wear resistance and toughness, delivering stable cutting edges and predictable tool life in routine turning operations. Can this insert be used for both external and internal turning? Yes, the triangular ISO form and chipbreaker design make the insert suitable for both external and internal turning, provided the holder and process parameters are matched to the workpiece and stability conditions. Which dimensions determine compatibility with a specific holder? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size (11 mm) and thickness (2.38 mm); ensure the holder pocket matches ISO specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 J740 Wendeplatten - Tungaloy
Reliable performance stems from ISO compatibility combined with the J740 wear-resistant grade and a precise 0.2 mm corner radius, delivering consistent turning results and predictable tool life; order via Metav Werkzeuge or consult our specialists for application guidance. TCGT 110202 J740 indexable turning insert — triangular, 0.2 mm radius | Tungaloy The TCGT110202 J740 is an ISO-standard triangular indexable insert designed for external and internal turning tasks, offering stable clamping and repeatable geometry for workshop production. ISO-standard triangular insert J740 grade for wear resistance 0.2 mm corner radius for precise edges Single-sided chipbreaker with central hole Predictable results through ISO conformity and secure mounting As an ISO standard insert, this triangular geometry ensures straightforward interchangeability across compatible holders and toolposts. The design focuses on repeatable positioning: form, 7° clearance, tolerance class, mounting style, size and thickness determine compatibility with the clamping system. This predictability reduces setup time and minimises process variation, so machining cycles run with stable cut conditions and reproducible surface finish, supporting efficient batch production. Robust grade and geometry for longer productive life The combination of a Tungaloy J740 carbide grade and the insert’s geometry provides a balance of wear resistance and edge toughness suitable for general turning. The single-sided chipbreaker aids reliable chip control on a range of steels and common workshop materials, while the 0.2 mm corner radius helps preserve cutting-edge integrity on detail features. As a consequence, tool change frequency is reduced and component tolerances remain consistent under moderate to heavy feed rates. System compatibility and handling that save time on the shop floor With an 11 mm size, 2.38 mm thickness and a triangular form, the insert delivers rigidity for typical external and internal turning tasks. The configuration with hole and a cylindrical hole plus one-sided countersink (40°–60°) ensures secure, repeatable clamping and straightforward orientation in the holder. Selecting the matching chipbreaker and J740 grade for the workpiece material achieves optimal chip formation and surface quality, improving throughput and process reliability. Contact Metav Werkzeuge for tailored application advice and stock information on Tungaloy J740 inserts — our consultants will recommend the optimal grade and chipbreaker for the intended material and machining conditions. Technical data Article number: 6807659 Manufacturer SKU: TUN6807659 Seller SKU: 6807659-Tungaloy Model series: ISO turning indexable inserts Material: carbide Grade: J740 Core data ISO designation: 110202 Insert designation: TCGT Shape: triangular Size: 11 mm Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Lead angle: 60° Mounting: with hole Special features Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Designed for turning applications ISO-compliant geometry for holder compatibility Tungaloy J740 grade for wear resistance FAQ What materials is this insert suitable for? The TCGT110202 J740 insert is intended for general turning and the J740 grade delivers good wear resistance on common steels and mixed workshop materials; select the chipbreaker to match the specific workpiece material. How is the insert secured in the holder? This insert is supplied with a central hole and a cylindrical hole plus one-sided countersink (40°–60°), which enables secure, repeatable clamping in compatible ISO holders. What influence does the 0.2 mm corner radius have on machining? A 0.2 mm corner radius provides a fine cutting edge suitable for accurate profiles and small-radius features while contributing to edge stability during normal turning operations. Which designation and codes identify this product? The part is listed under designation TCGT110202 with grade J740 and article number 6807659 (manufacturer SKU TUN6807659), enabling straightforward reordering and traceability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 KS05F Wendeplatten - Tungaloy
Take advantage of the KS05F grade's balance of wear resistance and edge stability together with precise geometry and ISO compatibility for consistent turning performance. Order the insert directly via Metav Werkzeuge or consult our technical advisors for grade and holder selection. TCGT 110202 KS05F Tungaloy indexable insert for turning TCGT110202 KS05F is an ISO-standard triangular indexable insert engineered for external and internal turning in a wide range of applications. ISO-certified triangular insert size 11 Tungaloy KS05F grade for wear resistance 0.2 mm corner radius for precise finishes Cylindrical hole with 40°–60° countersink Reliable cutting performance with optimised grade The combination of an ISO-standard geometry and the Tungaloy KS05F carbide grade delivers a dependable compromise between wear resistance and toughness. This balance reduces unplanned tool changes and contributes to steady production cycles, particularly in mixed or variable batch work. The hardened carbide substrate ensures consistent edge retention, while the specified grade enhances reliability in interrupted and continuous cuts. Operators benefit from fewer tool interventions and more predictable cycle times. Geometry tuned for surface quality and stability A 0.2 mm corner radius and a 7° relief angle provide a fine surface finish while maintaining chip control and edge strength. The 60° included angle and the triangular plate form contribute to multiple indexing positions and good stability under radial loads. The 2.38 mm plate thickness increases resistance to bending and vibration in demanding turning tasks. For less experienced users: a smaller corner radius improves finish but reduces mechanical strength at the tip, which is why the KS05F grade complements the geometry with added toughness. System compatibility and process integration Compatibility with the toolholder depends on form, relief angle, tolerance class, clamping method, size and thickness — factors that determine repeatability and clamping reliability. The insert features a cylindrical hole with a single-sided countersink (40°–60°) to secure the seat and ensure stable torque transfer. The single-sided chipbreaker is suitable for many turning scenarios; selection of chipbreaker and grade should match workpiece material, process stability and feed/speed strategy. For system setup, pair the insert with a matching external holder or boring bar, an appropriate shim/clamping set and correct screws to achieve consistent, repeatable results. For dependable machining with Tungaloy quality, contact Metav Werkzeuge for tailored advice on holder compatibility and grade selection — Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6843412 SKU: 6843412-Tungaloy Manufacturer SKU: TUN6843412 Model series: ISO-Drehwendeschneidplatten Designation: TCGT110202 Core specifications Insert size: 11 Plate thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 60° Materials & features Material: carbide Grade: KS05F (Tungaloy) Plate form: triangular Chipbreaker: one-sided Hole style: cylindrical hole + single-sided countersink (40°–60°) Application: turning Compatibility: ISO insert; compatibility by form, relief angle, tolerance class, clamping, size, thickness FAQ What turning operations is this insert designed for? The TCGT110202 KS05F Tungaloy indexable insert is intended for external and internal turning operations, compatible with ISO-standard holders designed for triangular inserts. How does the KS05F grade affect tool life and performance? The KS05F grade from Tungaloy provides a balanced performance combining wear resistance and edge stability, which supports longer tool life and stable cutting edges under mixed machining conditions. Which geometric features influence surface finish and strength? The 0.2 mm corner radius, 7° relief angle and 60° included angle govern surface finish and tip strength; the 2.38 mm thickness enhances rigidity for more stable cuts with fewer vibrations. How is the insert secured in the holder? The insert uses a cylindrical hole with a single-sided countersink (40°–60°); secure clamping and matching holder geometry are essential for repeatable, stable performance with the TCGT110202 KS05F. What should be considered when selecting the holder and clamping system? Holder compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; these determine seat fit, repeatability and process reliability for the Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and straightforward holder compatibility for stable production results; order the insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT 110202 NS9530 Tungaloy turning insert — triangular, 60° included angle TCGT110202 NS9530 is an ISO-conforming turning insert designed for finish turning of steel where low cutting forces and excellent surface quality are required. ISO triangular insert, 60° included angle Uncoated cermet grade NS9530 for finishing 0.2 mm corner radius for high surface finish Cylindrical hole with 40°–60° countersink Precision finishing for steel components The ISO turning insert in grade NS9530 is an uncoated cermet designed primarily as a finishing grade for steel. With a 0.2 mm corner radius and a sharp cutting edge geometry, the insert reduces cutting forces and supports continuous cuts with small depths of cut, producing a measurable improvement in surface quality. The cermet substrate offers a stable edge and good wear resistance under finishing conditions; this results in consistent component tolerances and less rework in downstream processes. Compatibility and secure clamping for reliable operation Compatibility with toolholders is determined by shape, 7° clearance angle, tolerance class, clamping method, size and thickness. The triangular form and 60° included angle mean the insert mates with standard triangular 60° holders; the cylindrical hole with a one-sided countersink (40°–60°) ensures positive seating and repeatable orientation. For workshop planners, matching the insert's 11 mm inscribed circle and 2.38 mm thickness to the holder specifications prevents chatter and maintains cutting stability, supporting predictable process planning and tool-change procedures. Process efficiency and recommended application Used as a finishing insert for external and internal turning, the design focuses on low cutting forces and excellent surface finish rather than heavy roughing cuts. In practice, this means shorter cycle times for final passes and reduced need for subsequent polishing. The single-sided chipbreaker geometry suits continuous cutting on steels with stable feed and speed settings. For best results, pair the insert with a rigid toolpost and appropriate coolant or lubrication strategy to extend edge life and preserve dimensional accuracy. Contact Metav Werkzeuge for application advice and to secure Tungaloy inserts for finish turning; Metav Werkzeuge can advise on holder compatibility and delivery options Technical Data Article number: 6998052 Manufacturer SKU: TUN6998052 SKU: 6998052-Tungaloy Model series: ISO turning inserts Grade: NS9530 Facts Thickness: 2.38 mm Inscribed circle: 11 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 60° Special features Material: carbide Cutting material: uncoated cermet Hole: cylindrical with one-sided countersink 40°–60° Insert shape: triangular Application: turning (finish) Chipbreaker: single-sided FAQ Which materials is this insert suited for? The TCGT 110202 NS9530 Tungaloy turning insert is optimised for finishing operations in steel and is intended for continuous cuts with small depths of cut to achieve high surface quality. What are the key dimensions to check for holder compatibility? Check the 2.38 mm thickness, 11 mm inscribed circle, 0.2 mm corner radius, 7° clearance angle and 60° included angle to ensure the insert fits the intended triangular 60° holder. Is the cutting material coated? The insert uses an uncoated cermet grade (NS9530), chosen for a sharp edge and excellent surface finish in final turning operations. How does the hole and countersink affect mounting? The cylindrical hole with a one-sided countersink (40°–60°) provides secure seating and repeatable orientation, which aids clamping stability and consistent cutting geometry. What cutting tasks is the insert not recommended for? The geometry and grade are focused on finishing; the insert is not intended for heavy roughing or high material removal rates where coated carbide grades or larger radii would be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and ISO compatibility for consistent productivity in turning operations. Order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. TCGT 110202 NS9530 Tungaloy turning insert — triangular, 60° geometry, 0.2 mm nose radius The TCGT 110202 NS9530 is an ISO triangular turning insert for finishing in turning operations, offering a sharp cermet cutting edge and optimised one-sided chip control for continuous cuts and small depths of cut ISO triangular insert, 60° geometry Sharp cermet grade NS9530 for fine finishing 0.2 mm nose radius for precise profiling Compatible with standard ISO clamping systems High-precision finishing for steel components The uncoated cermet grade NS9530 is developed as a finishing grade for steel, delivering a sharp cutting edge, reduced cutting forces and an excellent surface finish in continuous machining. For applications requiring high dimensional accuracy and visible surface quality, this insert offers a consistent cutting behaviour that reduces the need for follow-up operations. The finishing performance is particularly beneficial when working with small depths of cut and steady feed, where chip formation and edge stability determine the final result. Reliable geometry that supports secure clamping and repeatability The triangular plate with a nominal size of 11 mm and a 60° included angle provides predictable engagement and stable cutting dynamics. The insert thickness of 2.38 mm and the central hole with a cylindrical bore plus a single-side countersink (40°–60°) enable secure seating in common ISO toolholders and boring bars. Compatibility is defined by form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures correct clamping, repeatable indexability and safe cutting forces during production runs. Operational advantages and sensible application recommendations The small 0.2 mm nose radius supports fine profiling and tight corner transitions while keeping cutting forces low, which minimises vibration in less rigid set-ups. The one-sided chipbreaker steers chips reliably in continuous cutting, helping to maintain tool life and surface integrity. As a finishing-grade insert, it is intended for steel finishing operations; choosing a chipbreaker and grade adapted to the workpiece material, machining type and machine stability will enhance productivity and process security. For mixed-production environments, the ISO conformity simplifies tool changeover and inventory management. For availability, technical advice and to source original Tungaloy inserts through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt application support Technical Data Article number: 6997951-Tungaloy Manufacturer SKU: TUN6997951 Manufacturer article number: 6997951 Model series: ISO turning inserts Facts Size: 11 mm Thickness: 2.38 mm Geometry angle: 60° Nose radius: 0.2 mm Clearance angle: 7° Special features Grade: NS9530 (uncoated cermet) One-sided chipbreaker Hole: cylindrical with single-side countersink (40°–60°) Triangular plate form Application: Turning — finishing in steel; continuous cut and small depths of cut FAQ Which materials is this insert suitable for? The TCGT 110202 NS9530 insert is specified as a finishing grade for steel and is optimised for continuous cuts and small depths of cut. Can the insert be used in standard ISO toolholders? Yes, the plate conforms to ISO dimensions; compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness. What is the advantage of the NS9530 cermet grade? NS9530 provides a sharp cutting edge with low cutting forces and improved surface finish, making it suitable for high-precision finishing tasks on steel. How does the 0.2 mm nose radius affect machining results? A 0.2 mm nose radius enables precise profiling and tight corner radii while keeping cutting forces moderate, which aids dimensional control and surface quality. Is the chip control suitable for automated turning centres? The one-sided chipbreaker on the TCGT 110202 supports predictable chip evacuation in continuous turning processes, which benefits automated production lines. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com