TCGT 110202 NS9530 Wendeplatten - Tungaloy
Take advantage of a precise finishing grade and ISO compatibility for reliable turning results; the uncoated NS9530 cermet delivers a sharp cutting edge, low cutting forces and an excellent surface finish. Order the insert directly via Metav Werkzeuge or request technical advice from the consultants if required. TCGT110202 NS9530 Tungaloy turning insert — uncoated cermet finishing grade, 60° triangle A TCGT110202 NS9530 ISO triangular insert designed for fine finishing in turning applications, featuring a 7° clearance angle and a 0.2 mm corner radius for high-quality surface results. Uncoated cermet finishing grade NS9530 Sharp cutting edge for high surface finish Triangle insert with 60° included angle ISO-standard compatibility for turning holders Improved surface quality with controlled cutting forces The uncoated NS9530 cermet is formulated as a finishing grade for steel, offering a sharp cutting edge and low cutting forces that reduce tendency to burnish and minimise chatter during light cuts. In practice, this leads to consistently high surface finish and reduced secondary operations, which benefits production throughput and part quality. The combination of sharp geometry and cermet chemistry is particularly effective for continuous cutting and small depths of cut, where stable chip formation and minimal deformation of the workpiece surface are essential. ISO compatibility that simplifies tool set-up and clamping This triangular ISO plate follows standard dimensions and mounting features, easing replacement and inventory management. The insert presents a triangle form with a 60° included angle, a 0.2 mm corner radius and a 7° clearance angle; the thickness is 2.38 mm, and the size is 11 mm. The central hole is supplied with hole and a cylindrical bore plus single-sided countersink (40°–60°) for secure fastening. Compatibility to a particular holder depends on form, clearance angle, tolerance class, fastening and plate thickness, so selecting the matching ISO holder ensures repeatable clamping and consistent cutting geometry across batches. Operational advantages and recommended applications As a finishing insert, the plate is suited to external and internal turning where fine surface integrity is required. The single-sided chipbreaker and cermet substrate promote stable chip control in continuous operations on steel, reducing tool marks and improving component appearance. Using this insert in the appropriate feed and depth-of-cut window yields lower cutting forces and extended edge life compared with more aggressive grades, which can translate into fewer tool changes and less rework. For optimal performance, choose holder rigidity and speed parameters compatible with a finishing grade and consider coolant strategy to maintain edge stability. Contact Metav Werkzeuge for a technical selection tailored to specific turning tasks and to confirm holder compatibility; email info@metav-werkzeuge.com or call +49 2822 7131930 for an expert recommendation Technical data Article number: 6998051 Manufacturer SKU: TUN6998051 Our SKU: 6998051-Tungaloy Designation: TCGT110202 NS9530 ISO code: 110202 Core data Insert size: 11 mm Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 60° Hole: with hole; cylindrical + single-sided countersink (40°–60°) Special features Material: cemented carbide Grade/coating: NS9530 uncoated cermet finishing grade Plate form: triangular Chipbreaker: single-sided Typical use: external and internal turning; finishing and continuous cuts System components: ISO insert, matching external holder or boring bar, shim/ clamp set and replacement screws FAQ What is the primary application for this insert? The insert is intended for finishing in turning operations on steel, designed to produce a high surface finish with low cutting forces. Which materials is the NS9530 grade suited for? NS9530 is a finishing cermet optimised for steel; it performs best in continuous cuts and small depths of cut where surface integrity is critical. How does the insert mount to a holder? The triangular plate uses a central hole with a cylindrical bore and a single-sided countersink (40°–60°); compatibility is determined by holder form, clearance angle and thickness. Can this insert be used for internal turning? Yes, the geometry and finishing grade make it suitable for both external and internal turning when the correct holder and cutting parameters are used. What is the manufacturer's article number and SKU? The manufacturer article number is 6998051 and the manufacturer SKU is TUN6998051 for this Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of SH7025 coated carbide for stable cutting edges, ISO compatibility for straightforward holder matching, and a compact 0.2 mm corner radius for fine surface finishes — all contributing to reliable, productive turning operations. Order the TCGT110202 SH7025 indexable insert directly via Metav Werkzeuge or consult our advisors for application support. TCGT 110202 SH7025 – ISO triangular indexable insert for turning, Tungaloy The TCGT110202 SH7025 is an ISO-standard triangular indexable insert designed for external and internal turning, offering a tough, edge-stable grade suitable for variable engagement conditions. SH7025 coated carbide for edge stability ISO triangular insert, 11 mm size 0.2 mm corner radius for fine finishes Cylindrical hole with countersink, secure clamping Consistent cutting performance for varied turning tasks The insert is engineered as a compact ISO triangular plate, delivering stable cutting edges under fluctuating cutting conditions. The SH7025 grade is a coated carbide developed for toughness and edge integrity, which reduces the frequency of index changes and supports longer tool life in intermittent cuts. For shops running mixed batches or smaller holders, this formulation offers a balance between wear resistance and fracture toughness, translating into predictable cycle times and fewer unscheduled tool changes. Precise geometry and what it means for component quality With an 11 mm inscribed circle, a 0.2 mm corner radius and 7° clearance, the insert supports delicate finishing passes as well as light roughing with good surface quality. The small corner radius helps to lower cutting forces at the nose while still allowing for acceptable edge strength; this is particularly useful when tight dimensional tolerances and consistent surface finishes are required. The triangular form provides three effective cutting edges per index, improving cost-efficiency for repetitive turning operations. Mounting and compatibility explained for efficient setup Compatibility with a toolholder is determined by form, clearance angle, tolerance class, fastening, size and thickness; the ISO designation ensures straightforward matching with standard holders. The insert features a cylindrical hole with a single-side countersink (40°–60°) to secure seating and repeatable clamping. The plate thickness of 2.38 mm and the central hole arrangement allow for stable seating in standard external holders or boring bars that accept ISO triangular plates, facilitating quick index changes and accurate repositioning. Chip control and application focus for productivity gains Fitted with a single-sided chipbreaker, this insert manages chips effectively in a range of turning operations. The chipbreaker geometry, combined with the coated SH7025 substrate, helps maintain consistent chip formation and evacuation when machining steels and other common workpiece materials. For shops prioritising process reliability, the combination of chip control and a robust coating supports sustained cutting at practical feed rates while protecting the cutting edge from premature wear. Selecting the right insert for production needs When choosing an insert for a specific turning task, consider the interaction of grade, geometry and fixture rigidity. The ISO triangular indexable insert presented here is particularly suitable for workshops that require a versatile plate for both external and internal turning in variable conditions. Its design supports economical use across small to medium batch sizes and helps to streamline tool inventory by using a common ISO form factor. Contact Metav Werkzeuge for tailored application advice on the TCGT110202 SH7025 turning insert and to obtain matching holder recommendations; eMail: info@metav-werkzeuge.com – Phone: +49 2822 7131930 Technical data Article number: 6967543 Manufacturer SKU: TUN6967543 SKU: 6967543-Tungaloy Model series: ISO turning indexable inserts Material: carbide Numbers / core technical data Insert designation: TCGT110202 Grade: SH7025 Inscribed circle: 11 mm Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Insert angle: 60° Designs / special features Triangular plate form Cylindrical hole with single-side countersink (40°–60°) Single-sided chipbreaker Coated carbide grade SH7025 Suitable for external and internal turning ISO-standard geometry for holder compatibility FAQ What materials can be machined with this insert? The TCGT110202 SH7025 Tungaloy turning insert is formulated as a tough, edge-stable coated carbide and is suitable for a broad range of common turning materials, with particular strength in interrupted cuts and varying engagement conditions. How is the insert fixed in a holder? The insert uses a central cylindrical hole with a single-side countersink (40°–60°) for secure clamping; select an ISO-compatible holder that matches the plate size, thickness and fastening type to ensure repeatable seating. What advantages does the SH7025 grade provide? SH7025 offers a combination of toughness and stable cutting edges, reducing the risk of edge chipping during intermittent cuts and supporting longer effective tool life in diverse turning applications. How many usable edges does the triangular insert provide? A triangular ISO plate provides up to three indexable cutting edges; the TCGT110202 geometry allows economical rotation to fresh edges while maintaining consistent tool geometry. Is this insert suitable for small-tool holders and variable engagements? Yes. The grade and geometry of the insert are specifically indicated for use with smaller tools and where engagement conditions may vary, offering a balance between wear resistance and fracture toughness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a tough SH7025 coating and a compact 60° triangular geometry for reliable turning performance and predictable tool life; order matching inserts and holders via Metav Werkzeuge or ask the technical advisers for setup recommendations. TCGT 110202 SH7025 turning insert — 60° triangular indexable insert by Tungaloy A TCGT110202 SH7025 indexable turning insert designed for versatile external and internal turning tasks, offering a robust coated carbide grade and ISO conformity for straightforward holder compatibility. Triangular 60° geometry for versatile turning Coated carbide grade SH7025 for edge stability 0.2 mm corner radius for fine finishing Cylindrical hole with single-sided countersink Consistent cutting performance through a stable carbide grade The SH7025 grade is a coated carbide formulation optimised for edge stability and toughness, which is especially beneficial when using smaller tools or when engagement conditions vary. This composition reduces the risk of premature edge chipping and supports longer in-process intervals, yielding a more predictable hourly output. The result is enhanced productivity with fewer interruptions for insert changes, and a reduced likelihood of scrap components when turning challenging batches. ISO conformity and practical holder integration As part of the ISO-series of indexable turning inserts, compatibility is determined by form, relief angle, tolerance class, fixation and plate dimensions. The 60° TCGT triangular shape ensures straightforward fitting into a wide range of triangular toolholders. The insert features a cylindrical hole with a single-sided countersink (40°–60°), which secures it reliably in standard clamping systems and simplifies spare-part handling in a busy workshop. This design reduces set-up time and supports reproducible positioning across repeated tool changes. Surface quality and chip control for reliable results The small 0.2 mm corner radius and the single-sided chipbreaker layout combine to deliver fine surface finishes while maintaining consistent chip flow. For finishing passes the modest radius helps achieve acceptable surface integrity without excessive cutting forces; for semi-finish operations, the coated carbide and chipbreaker aid controlled material removal. Selecting the correct chipbreaker and grade in relation to workpiece material and machine stability will improve both surface quality and insert life, translating into lower overall machining cost per component. Workshop-ready system and straightforward selection This indexable insert is supplied in the standard ISO designation and integrates into a system consisting of an ISO turning plate, a matching external holder or boring bar, a shim/clamping set and replacement screws. Key dimensional attributes such as 11 mm plate size and 2.38 mm thickness make it suitable for compact tooling schemes where space and rigidity must be balanced. For teams assessing tool lists, the combination of coated carbide performance and the 60° triangular geometry simplifies stock rationalisation and allows efficient selection for a broad range of turning operations. Contact Metav Werkzeuge for tailored holder recommendations, stock availability and to order Tungaloy indexable inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed technical advice Technical data Article number: 6967546 Manufacturer SKU: TUN6967546 SKU: 6967546-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Numbers / Core technical data Plate size: 11 mm Plate thickness: 2.38 mm Corner radius: 0.2 mm Included angle: 60° ISO code: 110202 Manufacturer article number: 6967546 Designs / Special features ISO designation: TCGT110202 Grade/coating: SH7025 Coated cemented carbide Plate form: triangular Hole: with cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Application: turning Typical system: insert + holder + shim/clamping set + replacement screws FAQ What materials is this insert best suited to machine? This TCGT110202 SH7025 Tungaloy indexable insert is formulated as a tough, edge-stable grade suitable for a broad range of steels and general turning applications; selection of chipbreaker and cutting data should match the specific workpiece material. How does the 0.2 mm corner radius affect the finish? A 0.2 mm radius provides a balance between fine surface finish and acceptable cutting forces; the radius helps reduce edge chipping while supporting consistent surface quality on finishing and light semi-finishing passes with the SH7025 grade. Is the insert compatible with standard ISO triangular holders? Yes, the insert follows ISO geometry conventions and the 60° triangular shape together with the cylindrical hole and countersink permit use in standard triangular toolholders designed for TCGT inserts. Can this insert be used for internal turning operations? The insert's triangular geometry and compact dimensions make it suitable for both external and internal turning when combined with an appropriately sized boring bar and stable setup. What does the SH7025 coating deliver in practice? SH7025 provides a combination of toughness and edge stability for variable engagement conditions, improving reliability on interrupted cuts and when tool engagement fluctuates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard compatibility, coated carbide SH7025 for edge stability and the compact 0.2 mm corner radius to ensure precise, repeatable turning operations; order the inserts directly via Metav Werkzeuge or consult the team for tailored holder recommendations. TCGT110202 SH7025 Tungaloy turning insert — triangular ISO insert for precision turning, 60° main cutting angle TCGT110202 SH7025 Tungaloy turning insert is an ISO‑standardised triangular indexable insert designed for external and internal turning applications where edge stability and repeatable positioning matter. The insert suits systems that match form, clearance, tolerance class, fastening, size and thickness. ISO triangular turning insert TCGT110202 Coated carbide grade SH7025 for stable edges 0.2 mm corner radius, 7° clearance angle Central hole with countersink for secure clamping Precision and system compatibility for reliable production The ISO‑standard geometry simplifies integration into established tool systems: triangular form with a 60° cutting angle and a central hole with cylindrical bore plus one‑sided countersink (40°–60°) ensures positive seating and reproducible clamping. Compatibility is governed by matching of the insert’s form, clearance angle (7°), tolerance class, fastening method, size (11 mm) and thickness (2.38 mm) to the chosen holder or boring bar. This clarity reduces set‑up time and supports consistent part quality in serial production. Material performance: coated carbide grade SH7025 for stable cutting edges The SH7025 coating and base carbide substrate are formulated for high edge stability under variable engagement conditions. The grade is described as tough and edge‑stable, making it particularly suitable for smaller tools or operations with fluctuating cutting depths. The single‑sided chipbreaker promotes controlled chip formation at typical turning feeds and supports steady cutting forces, which helps maintain surface finish and tool life in mixed‑batch machining or semi‑finishing processes. Small corner radius and secure clamping for fine turning work A 0.2 mm corner radius permits precise contouring and fine finishing where tight radii are required, while the 2.38 mm plate thickness contributes to insert rigidity in light to medium turning passes. The insert’s triangular shape provides three indexable cutting corners per blank, enhancing overall economy in parts production. The central hole with countersink enables axial fixation and reduces the risk of axial displacement during interrupted cuts, so the system remains productive across varying part geometries. For robust, repeatable turning performance with genuine Tungaloy indexable inserts, contact Metav Werkzeuge for availability and holder matching via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6967529 SKU: 6967529-Tungaloy Manufacturer SKU: TUN6967529 Model series: ISO-Drehwendeschneidplatten Core technical data Size: 11 mm Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Insert angle: 60° Design & features Shape: triangular Central hole: cylindrical + one-sided countersink (40°–60°) Coating: SH7025 (coated carbide) Chipbreaker: one-sided Application: turning (external and internal) FAQ What operations is this insert suitable for? The TCGT110202 SH7025 Tungaloy turning insert is designed for external and internal turning; its geometry and chipbreaker suit a range of finishing and semi‑finishing cuts. Which holder features are required for correct compatibility? Compatibility depends on matching the insert form, clearance angle (7°), tolerance class, fastening method, size (11 mm) and thickness (2.38 mm) to the chosen holder or boring bar. What does SH7025 mean in practice? SH7025 denotes a coated carbide grade characterised by toughness and edge stability, making the insert well suited to variable engagement and smaller tool setups. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius provides a fine cutting edge for accurate contouring and improved surface finish on precision turning tasks. How is the insert clamped in the toolholder? The insert uses a central cylindrical hole with a one‑sided countersink (40°–60°) for axial fixation and secure clamping to prevent displacement during interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 SH7025 Wendeplatten - Tungaloy
Combining the SH7025 coated carbide grade with a 60° triangular geometry and a 0.2 mm corner radius delivers stable cutting, reliable edge life and precise chip control for turning tasks; order the TCGT110202 SH7025 insert directly via Metav Werkzeuge or consult our specialists for application support. TCGT110202 SH7025 Tungaloy indexable insert for turning, triangular 60° geometry TCGT110202 SH7025 is an ISO-format triangular indexable insert designed for external and internal turning, offering a tough coated carbide grade for variable engagement conditions. Tough SH7025 coated carbide for stability 60° triangular geometry for versatile turning 0.2 mm corner radius for finer edge control Cylindrical hole with single-side countersink Stable cutting and consistent chip control for turning The SH7025 grade is a coated carbide formulation engineered for toughness and cutting-edge stability, which helps maintain performance when engagement conditions change. As a triangular insert with a 0.2 mm corner radius and a dedicated chipbreaker, the component promotes reliable chip formation and reduces the risk of built-up edge under interrupted or unstable cuts. This results in fewer rework cycles and steadier cycle times, translating into measurable productivity gains for series and batch operations. Designed for quick integration into ISO tool systems Compatibility is governed by shape, clearance and fixation details; the insert's 60° geometry, 7° clearance and standard ISO form ensure straightforward mounting in compatible holders and boring bars. The central cylindrical hole with a single-side countersink (40°–60°) provides secure clamping and repeatable positioning, while the 2.38 mm plate thickness supports rigidity in smaller tool assemblies. The standardised dimensions simplify inventory and reduce setup time during tool changes, supporting uninterrupted production flow. Adaptable application range with predictable tool life Intended for turning operations, the insert performs particularly well in smaller tooling arrangements or where entry conditions vary frequently. The triangular shape offers multiple usable cutting edges, improving cost efficiency per indexable plate. When paired with a suitable holder and the correct feed/speed strategy, the indexable insert delivers consistent surface finish and dimensional control, making it a practical choice for mixed-production environments seeking a balance between durability and versatility. For tailored application advice or to procure Tungaloy TCGT110202 SH7025 indexable inserts for production use, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6967520 Manufacturer SKU: TUN6967520 Model series: ISO-Drehwendeschneidplatten Material: carbides Coating/grade: SH7025 Facts Geometry angle: 60° Clearance angle: 7° Corner radius: 0.2 mm Plate size: 11 mm Plate thickness: 2.38 mm Special features Plate form: triangular Hole: with cylindrical hole and one-side countersink (40°–60°) Chipbreaker: one-sided Intended use: turning Typical system: ISO insert + external holder or boring bar FAQ What turning tasks is this insert best suited for? The TCGT110202 SH7025 insert is designed for external and internal turning, performing especially well in smaller tools or where cutting engagement fluctuates. How is the insert fixed in the holder? Fixing is achieved via the central cylindrical hole with a single-side countersink (40°–60°), offering secure clamping and reproducible seating for ISO-compatible holders. Which features improve the insert’s edge stability? The SH7025 coated carbide grade and the dedicated chipbreaker enhance edge stability, while the 0.2 mm corner radius helps control edge wear and surface finish. How does the triangular geometry benefit cost-efficiency? A triangular shape provides multiple cutting edges per insert, increasing usable life per plate and reducing tooling cost per effective cutting edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH7025 for stable cutting edges and the ISO‑standard triangular form for flexible holder compatibility; this ensures productive turning and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. TCGT110202 SH7025 turning insert (ISO 110202) by Tungaloy — triangular 60° geometry, 0.2 mm corner radius TCGT110202 SH7025 Tungaloy turning insert is designed for ISO‑standard external and internal turning and provides reliable edge stability under variable engagement conditions ISO 110202 triangular geometry Coated carbide grade SH7025 0.2 mm corner radius for fine finishing 7° clearance for adaptable cutting conditions Improved process stability and consistent edge life The triangular indexable insert with SH7025 coating offers a balance between toughness and wear resistance, making it particularly suitable for turning applications where engagement varies. The grade is formulated to maintain a stable cutting edge, reducing the risk of premature chipping during interrupted cuts or variable depths of cut. Thanks to the ISO‑conform geometry and the 0.2 mm corner radius, operators benefit from repeatable component quality and fewer insert changes, which supports higher overall machine uptime and reduced tooling handling. Precise fit in standard toolholders for fast setup Compatibility with holders depends on form, clearance angle, tolerance class, fastening and plate thickness; the triangular ISO 110202 shape and the supplied hole with a cylindrical bore plus single‑side countersink (40°–60°) enable secure seating and straightforward clamping. The 7° clearance reduces rubbing at the flank and helps maintain dimensional accuracy across successive parts. For workshops running mixed operations, the standardised configuration minimises setup time and avoids costly holder adjustments. Clean surfaces and predictable chip control This insert features a single‑sided chipbreaker tuned for turning, which helps form controlled chips and improves evacuation in both external and internal operations. Controlled chip formation contributes directly to surface finish consistency and lowers the chance of rework. When paired with suitable cutting parameters and a robust holder assembly, the chip control characteristics of this grade support efficient machining cycles and better workpiece integrity on medium‑duty turning tasks. Practical choice for small tools and changing conditions The SH7025 variety is optimised for tools that encounter changing entry conditions or smaller insert sizes, delivering robust performance where tougher edge behaviour is required. The coated carbide substrate offers a compromise between hardness for wear resistance and toughness to resist fracture, making this insert a pragmatic option for day‑to‑day production where flexibility and longevity are valued. For reliable edge stability and application advice, contact Metav Werkzeuge to discuss suitability for specific turning tasks and to arrange supply of Tungaloy inserts Technical data Article number: 6967513 Dimensions & numeric data ISO designation: 110202 Diameter/size: 11 mm Plate thickness: 2.38 mm Corner radius: 0.2 mm Included angle: 60° Clearance angle: 7° Designs / Special features Triangular indexable insert Coated carbide (SH7025) Single‑sided chipbreaker With hole: cylindrical bore + one‑side countersink (40°–60°) ISO turning inserts series Suitable for external and internal turning FAQ What materials is this insert suitable for? The SH7025 coated indexable insert is a coated carbide grade designed for a broad range of turning tasks; selection of the actual workpiece material should follow machining strategy and stability requirements for best results. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius helps achieve finer surface finishes while still providing sufficient edge strength for typical turning operations; the lower radius is suited to delicate finishing and when tool runout is controlled. Is this insert compatible with standard ISO toolholders? Yes, the ISO‑conform triangular geometry and the specified hole/countersink allow secure clamping in holders designed for 110202 inserts, provided holder form, tolerance and fastening match the insert specification. Which cutting conditions benefit most from SH7025? The SH7025 grade performs well under variable engagement and where a balance of edge toughness and wear resistance is required; it is especially useful for smaller tools or operations with changing cut interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110202 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a tough, edge‑stable SH725 coated carbide grade, a precise 0.2 mm corner radius and an ISO‑compliant triangular geometry to improve turning stability and surface finish; order the insert directly via Metav Werkzeuge or contact our consultants for matching holders and clamping kits. TCGT 110202 SH725 Tungaloy indexable insert for turning, triangular 60° TCGT 110202 SH725 is an ISO‑standard triangular indexable insert engineered for external and internal turning, offering stable cutting edges and consistent performance in variable engagement conditions. ISO‑standard triangular insert SH725 coated carbide grade 7° relief angle for secure clearance 0.2 mm corner radius for fine finishing Increased productivity through a tough, coated carbide grade The SH725 grade is a coated cemented carbide designed for turning where toughness and edge stability are decisive. Its composition provides reliable wear resistance without sacrificing toughness, which is particularly beneficial for smaller tools or when cutting conditions vary. Selecting this grade reduces unexpected edge chipping, enabling longer uninterrupted cutting cycles and fewer insert changes. The included single‑sided chipbreaker assists controlled chip formation, which contributes to consistent surface quality and improved tool life in a range of turning tasks. Precision geometry for improved surface quality and repeatable setups A triangular 60° geometry combined with a 0.2 mm corner radius balances strength and finish: the small radius supports fine finishing while preserving edge robustness under moderate loads. The 7° relief angle ensures sufficient clearance to avoid rubbing, helping to reduce built‑up edge and heat generation. The insert’s 2.38 mm thickness and 11 mm size provide a compact profile for tight setups, while the cylindrical hole with a single‑side countersink (40°–60°) guarantees secure clamping and repeatable positioning in compatible holders. System compatibility and application guidance for confident selection This ISO indexable insert functions as part of a system consisting of the insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; ensure the holder matches the TCGT 110202 SH725 specification for correct seat and secure fixation. For best results, choose the chipbreaker and grade according to the workpiece material and machining stability—this approach optimises process reliability and surface finish while keeping operating costs under control. Contact Metav Werkzeuge for tailored holder recommendations, availability and to secure matching clamping kits for this Tungaloy insert Technical Data Article number: 6737247 SKU: 6737247-Tungaloy Manufacturer SKU: TUN6737247 Facts Shape: triangular, 60° Corner radius: 0.2 mm Relief angle: 7° Thickness: 2.38 mm Size: 11 mm Hole: with hole; cylindrical hole + single‑side countersink (40°–60°) Special features Coating/grade: SH725 Material: coated cemented carbide Chipbreaker: single‑sided Typical application: external and internal turning System: ISO indexable insert; requires compatible holder, shim and screws FAQ What machining tasks is this insert suitable for? The TCGT 110202 SH725 insert is intended for external and internal turning operations, offering reliable edge stability for a range of turning conditions. How is the insert secured to the holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°); proper seating, the correct clamping set and replacement screws ensure secure fixation and repeatable positioning. Which properties make SH725 a practical choice? SH725 is a tough, coated carbide grade with good edge stability, making it suitable for smaller tools and variable engagement conditions where chip control and resistance to chipping are required. How does the 0.2 mm corner radius affect results? A 0.2 mm corner radius balances surface finish and edge strength: it supports finer surface quality while maintaining sufficient edge robustness for most turning applications. Is the insert compatible with ISO tool holders? Yes, the insert follows ISO indexable insert standards; compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness—verify the holder matches these parameters before use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110202 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH725, a compact 0.2 mm corner radius and ISO compatibility for stable, repeatable turning results; order the insert directly via Metav Werkzeuge or ask the consultants for application support. TCGT 110202 SH725 Tungaloy turning insert — ISO triangular insert for precision turning The TCGT110202 SH725 Tungaloy insert is an ISO‑standard triangular turning insert designed for both external and internal turning, optimised for small tools and variable engagement conditions. Coated carbide grade SH725 ISO triangular insert, 11 mm size 0.2 mm corner radius Cylindrical hole with 40°–60° countersink 7° clearance angle Reliable cutting performance for consistent cycle times The combination of a coated carbide cutting material and the SH725 grade provides a balance of toughness and edge stability, which is particularly useful when using smaller tooling or when engagement conditions vary. The robust coating reduces flank wear and supports longer tool life under interrupted cuts, while the tough substrate helps prevent premature chipping. These characteristics translate into more consistent cycle times, fewer insert changes and improved process stability in routine turning operations. Precision geometry that simplifies tool selection The triangular ISO‑format and the 11 mm nominal size make the insert compatible with a wide range of ISO toolholders; the form, clearance angle and tolerance class determine final fit. The 0.2 mm corner radius delivers a defined cutting edge for repeatable part finish and dimensional control, while the 7° clearance angle ensures reliable rake and relief behaviour. The insert’s cylindrical hole with a single‑side countersink (40°–60°) supports secure clamping with standard screws and shim/clamping sets, reducing setup variance and enabling straightforward replacement in modular tool systems. Application focus and chip control for efficient turning Engineered as a single‑sided chipbreaker variant, the insert promotes predictable chip formation on common turning tasks. The single‑sided chipbreaker design helps to control chip flow for both external and internal turning, which eases swarf handling and can reduce secondary cleaning steps. The grade’s intended use for turning operations—especially where intermittent cutting or changing depths of cut occur—makes it suitable for shops aiming to combine productivity with workpiece quality. System integration and practical workshop handling As part of a typical ISO insert system, the component functions together with an appropriate external holder or boring bar, a shim/clamping set and replacement screws. The plate thickness of 2.38 mm and the triangular plate form permit compact clamping solutions and reduced overhang in small‑tool scenarios. Labelling and SKU data support traceability in inventory: original Tungaloy parts such as this are delivered as brand‑new, factory items suitable for straightforward swap‑outs during planned maintenance intervals. Contact Metav Werkzeuge for tailored advice and to secure genuine Tungaloy inserts for precision turning applications Technical data Article number: 6932705 Manufacturer SKU: TUN6932705 Seller SKU: 6932705-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TCGT110202 SH725 Tungaloy insert Material: Carbide Facts Corner radius: 0.2 mm Included angle: 60° Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 11 mm Hole: with hole Countersink: cylindrical hole + single‑side countersink (40°–60°) Special features Coating / grade: SH725 (coated carbide) Shape: triangular Chipbreaker: single‑sided Application: turning (external and internal) System components: ISO insert, matching toolholder or boring bar, shim/clamping set and replacement screws Intended use: tough, edge‑stable grade for turning, especially with smaller tools or varying engagement FAQ What turning tasks are best suited to this insert? The TCGT110202 SH725 Tungaloy insert is intended for external and internal turning where a tough, edge‑stable grade and compact geometry are advantageous, such as small‑tool operations and applications with intermittent engagement. How is the insert secured in the holder? The insert has a cylindrical hole with a single‑side countersink (40°–60°) and is designed to work with standard shims, clamping sets and replacement screws used in ISO toolholder systems. What advantages does the SH725 grade deliver? SH725 is a coated carbide grade emphasising toughness and stable cutting edges, which supports reliable performance under variable cutting conditions and helps to extend useful tool life on turning tasks. Can this insert be used for fine finishing? With a 0.2 mm corner radius and defined geometry, the insert can contribute to repeatable surface finish and dimensional control when combined with appropriate feeds and speeds in a stable setup. Is this an original Tungaloy part and what is the SKU? Yes — this is an original Tungaloy product, listed under article number 6932705 and seller SKU 6932705-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 SH725 Wendeplatten - Tungaloy
High-edge stability from the coated carbide SH725 grade and a precise 0.2 mm corner radius result in consistent finishes and repeatable performance in small-tool turning; the ISO triangular geometry simplifies holder selection and setup. Order genuine Tungaloy inserts via Metav Werkzeuge or consult the technical advisers for holder compatibility and batch supply. TCGT 110202 SH725 Tungaloy turning insert — ISO triangular 60° insert for turning The TCGT110202 SH725 is an ISO‑standard triangular turning insert designed for external and internal turning, optimised for small-tool applications and variable engagement conditions. ISO triangular 60° geometry for turning Coated carbide SH725 for edge toughness 0.2 mm corner radius for fine surface finish Cylindrical hole with 40°–60° countersink Consistent edge stability under variable engagement The coated carbide SH725 grade brings a balance of toughness and wear resistance that helps maintain the cutting edge during interrupted cuts and fluctuating engagement. In practice, this means longer intervals between edge changes and more predictable tool life for small‑tool operations. The triangular form contributes to multiple indexed corners, improving economy while the 0.2 mm corner radius supports fine surface quality without compromising strength. ISO compatibility reduces setup variation Compatibility with clamping systems is governed by the insert's form, 7° clearance angle, tolerance class, fastening method, size and thickness. The ISO standard designation and the 60° geometry allow straightforward pairing with matching external holders or boring bars. The insert's 2.38 mm thickness and nominal 11 mm size are typical dimensions that help ensure reliable seating and repeatable tool geometry when the correct shim/clamp set and screws are used. Improved finish and controlled chip formation A modest corner radius delivers a measurable benefit to surface finish while limiting cutting forces; the 0.2 mm corner radius is particularly suitable where fine finishes are required without sacrificing tool stability. The single-sided chipbreaker helps direct chips reliably for turning operations, and the cylindrical hole with one-sided countersink (40°–60°) provides accurate axial location and secure fastening, reducing the risk of movement under load and improving concentricity. Application guidance and system composition Designed for general turning tasks, the insert is intended to be used as part of a system: an ISO‑standard insert, matching external holder or boring bar, an appropriate underlay/clamp set and replacement screws. Selection of chipbreaker and grade should be matched to the workpiece material and machining conditions; the SH725 grade is described as a tough, edge‑stable option that performs well in small tools or where cutting conditions may change. For reliable results, choose a holder and clamping arrangement compatible with the insert’s geometry and hole style. Contact Metav Werkzeuge for genuine Tungaloy supply, application advice and to confirm holder compatibility for the TCGT 110202 SH725 turning inserts Technical data Article number: 6737143 SKU: 6737143-Tungaloy Manufacturer SKU: TUN6737143 Manufacturer: Tungaloy Designation: TCGT110202 SH725 Facts Insert angle: 60° Corner radius: 0.2 mm Clearance angle: 7° Thickness: 2.38 mm Size: 11 mm Special features Triangular insert form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Coated carbide grade SH725 ISO‑standard turning insert; compatible with matching holders FAQ What materials is this insert suited for? The TCGT 110202 SH725 Tungaloy turning insert (SKU 6737143-Tungaloy) is a versatile, coated carbide grade intended for a wide range of turning tasks; selection of chipbreaker and cutting data should be adapted to the specific workpiece material and stability of the setup. How does the SH725 grade affect tool life? SH725 is a tough, edge‑stable grade that helps maintain cutting performance under variable engagement, so the TCGT 110202 SH725 insert provides improved resistance to edge chipping and typically more consistent life in small‑tool operations. Which holder details must be checked before installation? Verify holder compatibility with the insert form, 7° clearance angle, tolerance class, fastening method, 2.38 mm thickness and 11 mm size; the correct shim/clamp set and screws are required for secure seating of the insert. Can the insert be used for internal as well as external turning? Yes, the triangular ISO‑standard geometry and the secure cylindrical hole location make the insert suitable for both external and internal turning when paired with an appropriate boring bar or holder. What benefit does the 0.2 mm corner radius provide? The 0.2 mm corner radius offers a balance between surface finish and edge strength, enabling finer finishes without substantially increasing cutting forces, which is advantageous for finishing passes or light roughing in small‑tool setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 SH725 Wendeplatten - Tungaloy
Benefit from the combination of an edge-stable SH725 grade and a compact 60° triangular geometry for reliable turning performance and extended tool life; ideal for small tools or variable engagement conditions. Order the insert directly via Metav Werkzeuge or ask our consultants for application support. TCGT110202 SH725 Tungaloy indexable insert — 60° triangular for turning The TCGT110202 SH725 is a 60° triangular indexable insert designed for ISO-based external and internal turning, offering high edge stability in compact tool setups. Coated carbide grade SH725 Triangular 60° form for strong engagement 0.2 mm corner radius for fine finishes 11 mm size, 2.38 mm plate thickness Cylindrical hole with 40°–60° countersink Stable edge life for short-tool turning and mixed engagement The combination of the SH725 coated carbide grade and compact triangular geometry delivers consistent cutting-edge stability, especially in short overhang tools and applications with varying engagement. The insert’s 0.2 mm corner radius is engineered to produce precise surface finishes while reducing the risk of edge chipping during interrupted cuts. Thanks to the 60° form, the insert provides a robust contact angle that balances cutting forces and toolholder stability, enabling longer tool life and fewer index changes on the shop floor. Secure clamping and efficient chip control for productive machining A single-sided chipbreaker on the insert improves chip formation and evacuation in typical turning operations, reducing the chance of recutting and improving surface integrity. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to ensure defined seating and repeatable clamping forces in compatible holders. Proper clamp and screw engagement limits axial and radial movement, which translates into steadier cutting conditions and reduced vibration — features that support higher process reliability and a lower scrap rate. ISO compatibility and practical shop-floor advantages Designed as part of the ISO turning insert family, the plate integrates into standard toolholder systems where compatibility is governed by form, relief angle, tolerance class, fastening, size and thickness. The 11 mm size with 2.38 mm plate thickness simplifies inventory management for ISO-based machining cells and allows quick replacement of worn inserts to minimise downtime. The system approach — insert, appropriate external holder or boring bar, shim/clamping set and spare screws — facilitates rapid changeovers and predictable cycle times, supporting a cost-effective production flow. For reliable, edge-stable turning with Tungaloy’s SH725 grade contact Metav Werkzeuge for tailored application advice and swift supply: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6737033 Manufacturer SKU: TUN6737033 SKU: 6737033-Tungaloy Model series: ISO turning indexable inserts Designation: TCGT110202 SH725 Tungaloy indexable insert Core data Geometry: 60° Corner radius: 0.2 mm Plate thickness: 2.38 mm Size: 11 mm Relief angle: 7° Special features Material: carbide Grade/coating: SH725 (coated carbide) Shape: triangular Hole type: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Typical application: turning System components: ISO insert, matching external holder or boring bar, shim/clamping set, spare screws SKU (manufacturer article number): 6737033 FAQ What applications suit this insert best? The TCGT110202 SH725 indexable insert is intended for external and internal turning, with particular strength in short-tool setups and operations with variable engagement. How does the SH725 grade benefit production? The SH725 coated carbide grade offers improved edge stability and wear resistance, which helps to extend tool life and maintain consistent part quality in turning tasks. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO specifications and compatibility depends on form, relief angle, tolerance class, fastening, size and thickness of the chosen holder. What chip control features are included? The insert integrates a single-sided chipbreaker and a hole with a one-sided countersink to support consistent chip formation and secure clamping. Which items are needed to assemble a working tool? A complete system comprises the ISO insert, a suitable external holder or boring bar, a shim/clamping set and the appropriate replacement screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 SH725 Wendeplatten - Tungaloy
Benefit from the combination of stable cutting-edge performance, versatile SH725 grade and full ISO compatibility to maintain steady production and predictable tool life. Order the insert directly via Metav Werkzeuge or consult the technical advisors for cutting data and holder compatibility. TCGT 110202 SH725 Tungaloy indexable insert – triangular ISO turning insert, 60° included angle The TCGT110202 SH725 Tungaloy indexable insert is an ISO‑standard triangular carbide insert engineered for general turning operations, offering a compact geometry for small tools and reliable edge stability across variable engagement conditions. ISO triangular insert, 60° included angle SH725 coated carbide for edge stability 0.2 mm corner radius for fine profiles Compatible with ISO turning toolholders Consistent cutting performance for variable conditions The insert is produced in the SH725 coated carbide grade, a formulation designed for stable chip formation and robust cutting edges when facing fluctuating engagement or smaller tool overhangs. The coating and substrate combination improves resistance to flank wear, which translates into more consistent component tolerances and less frequent insert change‑overs. For manufacturers aiming to reduce set‑up interruptions, this grade offers predictable behaviour in mixed batch runs and semi‑automatic machining sequences. Designed for accurate mounting and simple holder selection Compatibility to a holder is determined by form, clearance angle, tolerance class, fastening and thickness; the insert features a 60° included angle and a 7° clearance, with a precise 2.38 mm thickness that fits ISO‑standard triangular pockets. The insert’s cylindrical hole with a single‑sided countersink (40°–60°) enables secure clamping and stable seating in both external holders and boring bars. These mechanical details reduce vibration and improve repeatability, making toolholder selection straightforward in existing turning setups. Precision finishing and small‑profile capability With a 0.2 mm corner radius, the geometry supports fine profile work and effective light‑cut finishing passes while the single‑sided chipbreaker controls chip flow on the primary cutting edge. This makes the insert suitable for finishing and medium‑cutting operations where surface quality and dimensional stability are priorities. The triangular form and 11 mm size provide multiple edges per insert, increasing usable life and reducing tooling costs per part. Practical benefits in production planning and material coverage The insert belongs to an ISO turning insert series that covers a broad range of turning tasks; selection should match workpiece material, machining type and machine stability. The SH725 grade targets applications where edge security and adaptability are required rather than extreme high‑speed removal. The system approach — insert, compatible external holder or boring bar, and appropriate clamping screws — simplifies stock management and ensures that replacement parts are interchangeable across standard tooling families. For applications requiring reliable edge stability, order genuine Tungaloy SH725 inserts via Metav Werkzeuge or contact Metav Werkzeuge for tailored machining data at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6737034 SKU: 6737034-Tungaloy Manufacturer SKU: TUN6737034 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Designation: TCGT110202 SH725 Tungaloy insert Material: carbide Facts Included angle: 60° Corner radius: 0.2 mm Thickness: 2.38 mm Size: 11 mm Clearance angle: 7° Manufacturer article number: 6737034 Special features Coating/grade: SH725 Insert shape: triangular Hole: cylindrical hole with single‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: Turning Compatibility: ISO‑standard holders by form, clearance, tolerance, fastening, size and thickness FAQ What materials can be machined with this insert? The SH725 grade is a versatile coated carbide suitable for a wide range of materials; the TCGT110202 SH725 Tungaloy insert performs well in general steel and alloy turning where edge stability is required. How is the insert secured in the holder? The insert is mounted using its central cylindrical hole with a single‑sided countersink; correct clamping and the ISO pocket ensure stable seating and repeatable positioning for the indexable insert. Which cutting tasks suit a 0.2 mm corner radius? A 0.2 mm corner radius is ideal for fine profiling and finishing passes, offering a compromise between surface finish and edge strength when light to medium cuts are required. Is this insert compatible with standard ISO triangular toolholders? Yes — the insert follows ISO dimensions and the combination of 60° included angle, thickness and form makes it compatible with ISO triangular turning holders, subject to matching tolerance class and fastening. How many cutting edges are available per insert and what is the insert size? The triangular shape with an 11 mm size provides multiple usable cutting edges per insert, improving economy and reducing re‑ordering frequency for production environments. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110202 SH730 Wendeplatten - Tungaloy
Take advantage of the ISO conformity and the SH730 coated-carbide grade for predictable edge life and stable performance in varied turning conditions; order the insert or request application advice through Metav Werkzeuge for a reliable supply and part matching. TCGT 110202 SH730 triangle turning insert — ISO turning insert for general turning (Tungaloy) TCGT 110202 SH730 is a triangular, ISO‑compliant indexable insert designed for general turning tasks where a tough, edge‑stable grade is needed ISO‑compliant triangular insert for turning Tough SH730 coated carbide grade 0.2 mm corner radius for precise profiles Cylindrical hole with single‑side countersink Inscribed circle 11 mm, 2.38 mm thickness Predictable performance through a tough, edge‑stable grade The insert is made from coated carbide in the SH730 grade, chosen for its emphasis on edge stability and resistance to chipping under changing engagement. This makes it particularly suitable for short‑run jobs and tools with intermittent engagement, where consistent cutting behaviour reduces scrap and rework. The coated carbide surface improves wear resistance while maintaining a robust cutting edge, which supports steady surface finish and longer intervals between index changes. Geometry and clamping that support repeatable accuracy A triangular geometry with a 60° included angle and a 0.2 mm corner radius delivers a balance between strength and profile detail. The insert’s cylindrical hole with a single‑sided countersink (40°–60°) ensures secure seating and repeatable clamping in ISO holders. The 11 mm inscribed circle together with a 2.38 mm plate thickness gives a compact yet stiff package for external and internal turning where tool overhang and accessibility are factors. Ease of integration into existing ISO tool systems As an ISO‑standard turning insert, compatibility is determined by form, relief angle, tolerance class, fastening and thickness; this makes selection straightforward when matching to common toolholders and clamping sets. The 7° relief angle and triangular outline simplify orientation and indexing, enabling rapid replacement and minimal downtime. Reference to the ISO marking helps to find matching holders and spare screws in standard tool inventories. Operational benefits that matter on the shop floor Using a robust, edge‑stable insert reduces unexpected edge failures and improves process reliability, which in turn lowers machining interruptions and final inspection rejects. The combination of a purpose‑designed chipbreaker and the SH730 grade helps control chip formation across a range of feeds and depths of cut, contributing to consistent surface quality and predictable tool life. For shops seeking effective tool rotation and reproducible results, this insert supports a productive turning process with less operator intervention. Request application advice or place an order for the Tungaloy TCGT110202 SH730 insert through Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6854030 SKU: 6854030-Tungaloy Manufacturer SKU: TUN6854030 Model series: ISO turning inserts Name: TCGT110202 SH730 Tungaloy insert Facts Inscribed circle (IC): 11 mm Thickness: 2.38 mm Corner radius: 0.2 mm Included angle: 60° Relief angle: 7° Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Material: coated carbide Coating / grade: SH730 Shape: triangular Chipbreaker: single‑sided Application: turning Typical system: ISO insert, compatible holders, clamping set and replacement screws FAQ Is this insert suitable for both external and internal turning? Yes. The TCGT 110202 SH730 triangular insert is specified for external and internal turning when used with compatible ISO holders and appropriate clamping. Which workpiece materials suit the SH730 grade? The SH730 coated‑carbide grade is formulated as a tough, edge‑stable option suitable for a broad range of turning applications; select the chipbreaker and cutting parameters to match the specific workpiece material and machining conditions. How is the insert secured in the toolholder? The insert is located and clamped using the ISO‑compatible seating and the central cylindrical hole with a single‑side countersink, giving secure, repeatable fixation in matching holders. What does the 0.2 mm corner radius mean for machining? A 0.2 mm corner radius provides a compromise between edge strength and the ability to produce relatively fine contours, improving profile accuracy while reducing the risk of corner chipping in interrupted cuts. How can the part be referenced for reorders or tool planning? Use the designation TCGT110202 SH730 alongside the manufacturer SKU TUN6854030 to ensure correct reorders and tool‑room documentation. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110202 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp TH10 uncoated carbide grade, a triangular ISO 110202 geometry and a 60° included angle for efficient external and internal turning; these features support low cutting forces and clean surface finish. Order the TCGT110202 TH10 indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT 110202 TH10 Tungaloy indexable turning insert — triangular insert for turning, 60° included angle TCGT110202 TH10 Tungaloy indexable turning insert provides a versatile solution for external and internal turning where low cutting forces and a clean cutting edge are required ISO 110202 triangular insert for turning Uncoated carbide grade TH10 for low cutting forces 7° clearance angle for reliable chip control Cylindrical hole with one-sided countersink Performance and process reliability for productive turning The triangular indexable insert is engineered for consistent machining of non-ferrous materials and applications that benefit from a sharp, uncoated cutting edge. The TH10 grade is an uncoated carbide formulation optimised to produce low cutting forces and a tidy surface finish, which in turn reduces power draw and tool-induced vibration. The ISO-style geometry ensures predictable seating and repeatable orientation on compatible holders; compatibility is determined by form, clearance angle, tolerance class, clamping method, and plate size and thickness. Selecting a matching chipbreaker and holder stability delivers measurable cycle-time improvements and reduces scrap rates. Practical benefits: ease of selection and machining outcomes With a 60° included angle and a 7° clearance angle, the insert balances strength and accessibility in both external and internal turning. The small 0.2 mm corner radius assists in producing fine surface quality on delicate features while maintaining edge robustness for light to moderate depths of cut. The centre hole with a cylindrical bore and one-sided 40°–60° countersink allows secure fastening and simple orientation during insert changes. For workshops prioritising throughput and surface integrity, this triangular insert offers a straightforward path to improved part consistency without complex parameter changes. Application guidance and compatibility considerations Designed as part of an ISO-compliant insert system, the plate integrates into a complete turning setup comprising a matching external holder or boring bar, a clamping pad or kit, and replacement screws. The plate thickness of 2.38 mm and inscribed size of 11 fit standard toolholder pockets engineered for ISO 110202 profiles. When machining, choose a chipbreaker and grade that match the workpiece material and the rigidity of the setup; the single-sided chipbreaker on this insert supports controlled chip formation in many non-ferrous tasks. Clear labelling of geometry and grade simplifies tool management on the shop floor and reduces setup time between jobs. Durability, economy and manufacturer competence Although uncoated inserts typically rely on edge sharpness rather than surface coatings, the selected carbide substrate delivers a balance of wear resistance and fracture toughness suitable for a wide range of non-ferrous turning operations. This combination often yields lower overall tooling costs through reduced rework and stable edge life under appropriate cutting conditions. As part of Tungaloy’s portfolio, the product benefits from the manufacturer’s focus on productive machining and sensible grade choices for diverse applications. For a precise tool-match recommendation based on material and machining parameters, contact Metav Werkzeuge — technical consultants are available to advise on holder compatibility and chipbreaker selection and can supply the Tungaloy TCGT110202 TH10 insert promptly Technical Data Article number: 6807667-Tungaloy Manufacturer item number: 6807667 SKU: TUN6807667 Model series: ISO-Drehwendeschneidplatten Material: carbide Facts ISO code: 110202 Plate form: triangular Inscribed size: 11 Plate thickness: 2.38 mm Clearance angle: 7° Included angle: 60° Corner radius: 0.2 mm Special features Grade: TH10 Coating: uncoated Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning FAQ What material applications suit this insert best? The TCGT110202 TH10 Tungaloy indexable turning insert is intended primarily for non-ferrous materials and operations where a sharp, uncoated edge supports low cutting forces and a clean finish. How does the 7° clearance angle influence performance? A 7° clearance angle reduces rubbing behind the cutting edge, helping the insert maintain a sharp cutting action and improving chip flow in typical turning setups. Is the insert compatible with ISO-standard holders? Yes, the ISO 110202 designation corresponds to standard triangular insert geometry; compatibility depends on holder form, tolerance class, clamping method, size and thickness. What does the single-sided chipbreaker provide? The single-sided chipbreaker is designed to control chip formation in many turning conditions, supporting stable chip flow and reduced likelihood of entanglement during machining. Can this insert be used for internal as well as external turning? Yes, the combination of a 60° included angle and compact triangular form makes the insert suitable for both external and internal turning where access and rigidity permit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110202 TH10 Wendeplatten - Tungaloy
Take advantage of low cutting forces and a clean surface finish delivered by an uncoated carbide geometry with a 0.2 mm nose radius and 7° relief; this combination reduces machining resistance and improves edge life during turning. Order the TCGT 110202 TH10 insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT 110202 TH10 ISO turning insert (triangular) by Tungaloy The TCGT 110202 TH10 is an ISO-indexable triangular turning insert designed for external and internal turning of non-ferrous materials and other applications requiring a low-force, clean-cutting edge. ISO triangular insert TCGT 110202 TH10 Uncoated carbide for low cutting forces Single-sided chipbreaker, cleaner surface finish 0.2 mm nose radius and 7° relief angle Reliable low-force cutting for non-ferrous materials The combination of uncoated carbide and a precisely honed 0.2 mm nose radius produces low cutting forces, which is especially beneficial for softer metals and alloyed non-ferrous parts. As a result, the cutting process requires less drive power and minimises deflection, improving dimensional stability. The single-sided chipbreaker supports consistent chip formation for a clean surface finish, reducing secondary operations and increasing process efficiency. Clear compatibility and simple mounting for flexible use This ISO-series indexable plate is manufactured to standard dimensions so fitment depends on form, relief angle, tolerance class, mounting method, size and thickness. The triangular 11 mm format with a 2.38 mm plate thickness and a centre hole with cylindrical bore plus single-side countersink (40°–60°) enables secure clamping in many standard holders and boring bars. Clear reference to the ISO designation ensures straightforward replacement and inventory management when pairing with compatible toolholders. Stability and application guidance for predictable results A 7° relief angle and the single-side chip control are optimised to balance edge sharpness and mechanical strength. For external turning and light internal operations, this geometry reduces the risk of built-up edge while maintaining a consistent finish. Choose this grade where low cutting resistance and a smooth surface are priorities; for more demanding interrupted cuts, consider a grade with higher toughness or coating adapted to the workpiece. Practical benefits for workshop throughput and process planning The ISO-indexable design simplifies insert changes and reduces machine downtime, while the uncoated, sharp edge supports operations where minimal burr and low cutting forces matter. The insert’s standardised geometry aids tool management across multiple machines, enhancing reproducibility and allowing engineers to plan feeds and speeds based on known chipformer behaviour. Where surface quality and machining economy are key, this insert offers a focused solution. For application advice and availability of the TCGT 110202 TH10 from Metav Werkzeuge, contact Metav Werkzeuge for tailored support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6807664 SKU: 6807664-Tungaloy Manufacturer article number: TUN6807664 Model series: ISO indexable turning inserts Application: Turning Numbers / Core technical data Insert size: 11 mm Plate thickness: 2.38 mm Nose radius: 0.2 mm Relief angle: 7° Included angle: 60° Material: carbide Designs / Special features Triangular plate form Uncoated carbide grade TH10 Single-sided chipbreaker With hole: cylindrical bore + one-sided countersink (40°–60°) ISO designation: TCGT110202 Typical system: insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ What materials are best suited to this insert? The TCGT 110202 TH10 insert is optimised for non-ferrous materials and applications where an uncoated, sharp cutting edge supports low cutting forces and clean surfaces. How is the TCGT 110202 TH10 attached to a holder? The insert uses an ISO triangular format with a central cylindrical hole and single-sided countersink (40°–60°) for secure clamping in compatible toolholders and boring bars. Can this insert be used for both external and internal turning? Yes, the geometry and dimensions of the TCGT 110202 TH10 make it suitable for external and light internal turning operations when paired with the correct holder. What advantage does the uncoated carbide grade TH10 provide? The TH10 uncoated grade offers a sharp, universal edge that reduces cutting forces and supports a clean finish, particularly on softer and non-ferrous workpiece materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110204 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 carbide and precise 60° triangular geometry for reliable, process-secure turning; order genuine inserts and accessories through Metav Werkzeuge or ask our technical consultants for compatibility guidance. TCGT 110204 AH725 turning insert – PVD-coated carbide, 60° triangle (Tungaloy) The TCGT110204 AH725 Tungaloy insert is an ISO-standard triangular turning insert designed for external and internal turning operations in mixed steel and stainless-steel applications. ISO triangular insert, 60° geometry PVD-coated carbide AH725 grade 0.4 mm nose radius for fine profiles Cylindrical hole with countersink for secure clamping Consistent cutting performance across mixed steels The PVD-coated AH725 grade is formulated for universal performance on steel and stainless steels, delivering stable chip formation and extended life under variable workpiece conditions. The coating enhances wear resistance and supports higher cutting speeds where appropriate, which translates into fewer tool changes and improved machine uptime. For operations requiring a balance between robustness and edge stability, this insert offers a dependable compromise that reduces scrappage and supports repeatable part quality. Secure clamping and straightforward compatibility Designed as an ISO-standard element, compatibility is determined by shape, clearance angle, tolerance class, fastening method, size and thickness. The 60° triangular form and the cylindrical hole with a single-sided countersink (40°–60°) ensure positive seating in matched cutters and secure axial retention. With a plate thickness of 2.38 mm and a diameter/size of 11 mm, the insert integrates with common external holders or boring bars; when selecting a holder, match the geometry and tolerance class to guarantee safe clamping and consistent cutting forces. Fine-profile machining and surface-finish control A 0.4 mm nose radius combined with a single-sided chipbreaker gives a measured approach to surface finish and dimensional control, particularly on smaller tools or where close tolerances are required. The modest radius supports crisp profiles while the chipbreaker manages swarf to avoid edge loading and built-up edge on stainless materials. This geometry is well suited to finishing passes and light turning where the objective is superior surface quality rather than heavy stock removal. Practical applications and productivity benefits Suitable for both external and internal turning, the insert performs well in mixed-production environments where material types change across batches. Its universal character reduces the number of different grades needed in the tool crib, simplifying inventory and lowering tooling costs over time. By combining a resilient carbide substrate with PVD coating and an optimised chipbreaker form, the insert improves process security and contributes to predictable tool life, which supports efficient production planning and reduced machine idle time. Contact Metav Werkzeuge today for expert advice on matching the Tungaloy turning insert to existing holders or for ordering genuine inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com for fast, application-focused support. Technical data Article number: 6857025 Manufacturer SKU: TUN6857025 SKU: 6857025-Tungaloy Designation: TCGT110204 Facts Included angle: 60° Nose radius: 0.4 mm Plate thickness: 2.38 mm Plate size: 11 mm Special features Grade/coating: AH725, PVD-coated carbide Shape: triangular Chipbreaker: single-sided Hole: cylindrical hole + single-sided countersink (40°–60°) Application: turning Material: carbide FAQ What materials is this insert suitable for? The Tungaloy TCGT110204 AH725 insert is intended for steel and stainless steels; the AH725 PVD-coated carbide grade provides universal performance across these materials. Is the insert compatible with standard ISO triangular holders? Yes. The insert follows ISO geometry; compatibility depends on matching the cutter form, clearance angle, tolerance class, fastening and plate thickness. What is the recommended use for the 0.4 mm nose radius? A 0.4 mm nose radius is recommended for fine profiling and finishing passes where surface quality and dimensional control are priorities. How does the chipbreaker affect machining on stainless steel? The single-sided chipbreaker assists in controlled chip formation and helps prevent built-up edge on stainless steels, improving surface finish and process stability. Are replacement screws or clamping components included? The insert is supplied as the cutting plate; clamping sets and screws are considered separate items and should be specified to match the holder and tolerance class. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110204 GT9530 Wendeplatten - Tungaloy
Optimise finishing operations with the wear‑resistant GT9530 coated cermet and a precise 0.4 mm corner radius to achieve consistent surface quality and longer cutting intervals. Order the insert directly via Metav Werkzeuge or consult their specialists for holder compatibility and process integration. TCGT110204 GT9530 Tungaloy indexable insert for turning (triangular, 60°) A TCGT110204 GT9530 ISO triangular indexable insert for external and internal turning, designed for wear‑resistant finishing and predictable tool life Coated Cermet GT9530 for long tool life ISO TCGT110204 triangular geometry 60° 0.4 mm corner radius for fine finishing Compatible with standard ISO clamping systems Superior surface finish with predictable wear behaviour The GT9530 grade is a coated cermet finishing compound formulated to combine hardness at elevated temperatures with controlled wear progression. This results in a fine surface on turned parts and reduces the frequency of tool changes, supporting longer uninterrupted production runs. Cermet materials fuse ceramic and metallic phases to improve dimensional stability compared with conventional carbides; the result is a consistent part finish and fewer rejects when used under stable cutting conditions. Stable clamping and reliable repeatability for production runs Built to ISO form, the triangular 60° geometry and standard hole design enable dependable seating in conventional external holders and boring bars. The 7° relief angle and 0.4 mm corner radius promote predictable chip formation for finishing passes, while the insert’s 2.38 mm thickness and cylindrical hole with single‑side countersink (40°–60°) ensure secure fastening and repeatable torque transfer. These features support tight tolerances and reduce the likelihood of insert displacement during batch production. Economical finishing through grade selection and process fit Selecting a wear‑resistant finishing grade such as GT9530 reduces downstream work by improving first‑pass quality and reducing regrinding. The combination of a coated substrate and a single‑side chipbreaker suits mild to medium alloyed steel in turning operations, offering a balance between surface quality and tool life. For production engineers, the predictable wear curve and straightforward ISO compatibility simplify integration into existing tool systems, lowering the total cost of ownership through fewer unscheduled tool changes. For reliable finishing performance and holder compatibility checks, contact Metav Werkzeuge for tailored advice on the Tungaloy GT9530 insert and precise toolholder recommendations – eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical data Article number: 6997871 SKU: 6997871-Tungaloy Manufacturer SKU: TUN6997871 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Dimensions & core data Insert size: 11 mm Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 60° Hole style: cylindrical hole with single‑side countersink (40°–60°) Materials & special features Material: carbide Grade/coating: GT9530 (coated cermet) Chipbreaker: single‑sided Shape: triangular Application: turning FAQ Which materials is this insert suitable for? The TCGT110204 GT9530 insert is a finishing grade optimised for steel, particularly mild to medium alloyed steel in turning applications, delivering improved surface quality and extended cutting intervals. Will this insert fit standard ISO triangular toolholders? Yes. The insert follows the ISO TCGT form and its cylindrical hole with a single‑side countersink is intended for compatible ISO clamping systems and standard external holders or boring bars. What cutting tasks are recommended for this grade? The GT9530 grade is intended for finishing and light universal turning under stable cutting conditions, where surface quality and predictable wear are priorities. Can this triangular insert be used for internal turning? Yes; the ISO triangular geometry and standard hole design make the insert suitable for both external and internal turning when paired with the appropriate holder or boring bar. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius helps achieve a fine surface finish while providing moderate edge strength; it is well suited to finishing passes where better appearance and tighter tolerance control are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110204 KS05F Wendeplatten - Tungaloy
Take advantage of a balanced combination of precision ISO compatibility, robust KS05F carbide grade and a stable clamping design for consistent turning performance; order directly via Metav Werkzeuge or ask the consultants for application support. TCGT110204 KS05F Tungaloy turning insert (ISO triangular, 11 mm, 7° relief) The TCGT110204 KS05F is an ISO‑standard triangular turning insert designed for efficient external and internal turning in production and job‑shop environments. ISO triangular insert TCGT form Tungaloy KS05F grade for wear resistance 11 mm size with 0.4 mm nose radius Cylindrical hole with 40°–60° countersink Consistent holder compatibility for reliable set‑ups The insert is built to ISO norms so compatibility with standard toolholders is predictable: form, relief angle, tolerance class, size and thickness determine fit and clamping. This predictability reduces set‑up time and minimises rejects in batch production. Where a stable tool geometry is required, choosing an ISO‑compliant insert simplifies tool inventory management and ensures interchangeability across holders and underplates. Balanced carbide grade for longer tool life and edge stability The KS05F grade from Tungaloy combines wear resistance and toughness tailored for turning applications, giving durable cutting edges without excessive chipping. The choice of grade supports a broad range of steels and typical turning operations, enabling longer tool life and fewer interruptions for insert changes. In practice this leads to improved process efficiency and predictable maintenance cycles in mixed‑material series production. Geometry and mounting that enhance cutting stability Triangular geometry with an 11 mm inscribed circle, 2.38 mm thickness and a 0.4 mm nose radius provides a robust contact area and a precise cutting tip for general turning tasks. The 7° relief and 60° included angle help maintain cutting edge strength while allowing effective chip evacuation. The cylindrical hole with one‑sided countersink (40°–60°) secures the insert firmly in the clamp, reducing vibration and improving surface finish consistency. Practical performance in external and internal turning Designed for both external and internal turning, the single‑sided chipbreaker geometry supports controlled chip formation when matched to workpiece material and stability of the setup. The carbide construction and KS05F specification make the insert suitable for a wide spectrum of turning tasks where a balance of productivity and surface quality is required. Selecting the appropriate chipbreaker and cutting parameters will deliver measurable gains in cycle time and repeatability. For reliable, consistent turning in production environments, specify the Tungaloy KS05F insert via Metav Werkzeuge — contact Metav Werkzeuge for availability and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6843413 Manufacturer SKU: TUN6843413 Name: TCGT110204 KS05F Tungaloy turning insert Manufacturer: Tungaloy Material: Carbide ISO designation: 110204 Core data Size (inscribed circle): 11 mm Thickness: 2.38 mm Nose radius: 0.4 mm Relief angle: 7° Included angle: 60° Hole style: Cylindrical hole + one‑sided countersink (40°–60°) Special features Grade: KS05F (Tungaloy) Geometry: Triangular insert (TCGT) Chipbreaker: One‑sided Typical application: External and internal turning System: ISO turning plate with compatible holder, underplate and clamping set FAQ What workpiece materials is this insert suitable for? The TCGT110204 KS05F insert is specified for turning and the KS05F grade is formulated for good wear resistance and edge stability across a wide range of steels and common turning materials. How is the insert clamped in the holder? The insert uses a cylindrical centre hole with a one‑sided countersink (40°–60°) so it can be firmly clamped in standard ISO toolholders, ensuring stable seating and reduced vibration. What benefit does the 0.4 mm nose radius deliver? A 0.4 mm radius provides a compromise between strength of the cutting edge and the ability to achieve fine surface finishes; the radius supports edge robustness without excessive cutting forces in typical turning operations. Can the insert be used for both external and internal turning operations? Yes, the triangular geometry and the KS05F grade make the insert suitable for both external and internal turning when paired with the correct holder and cutting parameters. Is the insert interchangeable with other ISO TCGT inserts? ISO conformity of the TCGT110204 KS05F ensures interchangeability with other inserts of the same ISO designation, provided form, size and tolerance class match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110204 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, consistent wear behaviour and straightforward holder compatibility for more productive turning operations; order genuine Tungaloy inserts via Metav Werkzeuge or consult our advisors for application support. TCGT110204 NS520 Tungaloy — ISO turning indexable insert for finishing, triangular 11 mm TCGT110204 NS520 is an ISO-standard triangular turning insert designed for finishing to light machining of steel, supplied by Tungaloy ISO-standard triangular insert, 11 mm inscribed circle Cermet grade NS520 for superior surface finish 0.4 mm nose radius for accurate profiles With hole and 40°–60° countersink for secure fixing Precision surface quality for finishing and dimensional control The cermet NS520 grade is tailored for finishing and light machining of steel, delivering a stable wear pattern and excellent surface finish. Cermet combines ceramic hard phases with metallic binders to offer a fine cutting edge that resists abrasive wear while promoting consistent dimensional results. This makes the insert particularly suited to applications where tolerance adherence and component appearance are critical, such as shaft turning and final-pass profiling. Built for reliable system compatibility and quick indexability The insert follows ISO geometry and a standard fixing design, so compatibility with matched external holders and boring bars is determined by form, clearance angle, tolerance class, securing method, size and thickness. The triangular shape with a central hole and one-sided countersink (40°–60°) ensures stable clamping and predictable repeatability during index changes. For workshop workflows this reduces downtime and simplifies tool stocking. Enhanced cutting performance via material and chip control The cutting material is cermet (coated cermet available), offering a balance between edge retention and thermal stability for low- to medium-speed finishing. The one-sided chipbreaker geometry supports controlled chip formation for light turning operations, helping to avoid built-up edge and to maintain consistent cutting forces. Together, these attributes increase process reliability and contribute to longer intervals between insert changes. Practical handling and set-up advantages for production environments With an inscribed circle of 11 mm, a 0.4 mm nose radius and a plate thickness of 2.38 mm, the insert provides fine profile control while remaining robust under common finishing feeds. The 7° clearance angle minimises rubbing on the flank face and helps preserve the cutting edge. Marked ISO designation and the Tungaloy article number allow straightforward identification and reordering, facilitating tool management and inventory control in production settings. For tailored advice on deploying NS520 cermet inserts or to obtain genuine Tungaloy cutting tools, contact Metav Werkzeuge for direct ordering and application consultation via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6807673 SKU: 6807673-Tungaloy Manufacturer SKU: TUN6807673 ISO designation: TCGT110204 Brand: Tungaloy Facts Inscribed circle: 11 mm Nose radius: 0.4 mm Plate thickness: 2.38 mm Clearance angle: 7° Included angle: 60° Special features Material: Carbide Cutting material: Cermet (NS520) Chipbreaker: one-sided Plate form: triangular Fixing: with hole; cylindrical hole + single-side countersink (40°–60°) Application: Turning Typical use: finishing to light machining of steel FAQ What materials is this insert suitable for? The TCGT110204 NS520 Tungaloy indexable insert is optimised for steel finishing and light machining; the NS520 cermet grade provides consistent wear and good surface quality on common steel alloys. Which operations suit this insert best? This insert excels in external and internal turning where high surface finish and dimensional accuracy are required, such as final passes, profiling and fine facing. How does the ISO designation TCGT110204 translate into geometry? The ISO code indicates a triangular plate with an 11 mm inscribed circle, a 0.4 mm nose radius and a specific thickness and clearance geometry; the code enables selection of a compatible holder system. Is the insert compatible with standard clamping systems? Yes — the ISO-standard form, the central hole with countersink and the specified thickness ensure compatibility with matching external holders and boring bars when the holder matches form, size and tolerance class. What advantages does the NS520 cermet grade offer over conventional grades? NS520 cermet focuses on surface finish, dimensional stability and uniform wear; it maintains a sharp edge and reduces the risk of built-up edge during finishing passes, supporting repeatable part quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110204 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and secure clamping for consistent turning results; the uncoated NS9530 grade offers a sharp edge and excellent surface quality. Order directly via Metav Werkzeuge or consult the team for application advice. TCGT110204 NS9530 triangular indexable insert for turning by Tungaloy — uncoated cermet, fine finishing TCGT110204 NS9530 triangular indexable insert designed for finishing operations in turning, delivering low cutting forces and high surface quality for continuous cuts Cermet grade NS9530 for fine finishing Low cutting forces with sharp cutting edge ISO TCGT 110204 triangular geometry Cylindrical hole with single-side countersink 40°–60° High-quality finishing that reduces rework The insert addresses high-surface-quality requirements in precision turning by combining an uncoated cermet substrate with a finely sharpened edge geometry. As a finishing grade the NS9530 is optimised for continuous cutting, producing a high surface finish while keeping cutting forces low. This reduces the need for secondary operations and helps maintain dimensional tolerances without additional finishing passes, which is especially beneficial for serial production of turned parts. Secure clamping and ISO-compatible geometry for reliable indexing Designed to the ISO specification, the insert follows the TCGT 110204 form and requires a matching holder, shim and clamping set. The cylindrical hole with a single-side countersink (40°–60°) ensures a positive, repeatable seating and torque transmission, while the 7° clearance angle supports unobstructed chip flow. These features combine to provide consistent seating and straightforward indexability, reducing downtime during insert changes. Process stability and efficiency in routine turning The combination of a sharp cutting edge and the 0.4 mm corner radius enables precise control over small depths of cut typical for finishing passes. The one-sided chipbreaker is suited for stable chip formation on steels and contributes to predictable tool life and cycle times. Using this insert in a properly set-up turning centre promotes process stability and helps achieve economical production rates with minimal scrap. Practical application notes for best results Intended for external and internal turning, the triangular insert is particularly effective on steel in finishing operations; select a chipbreaker and mount that match workpiece rigidity and machining conditions. Key dimensions include a thickness of 2.38 mm, an inscribed size of 11 mm, and an included angle of 60°, which together determine cutting edge engagement and strength. For small step-over finishing or light interrupted cuts, this insert provides the required edge integrity and surface quality. For reliable finishing with Tungaloy’s NS9530 grade and secure ISO compatibility, contact Metav Werkzeuge for tailored application advice and ordering — Metav Werkzeuge is ready to support selection and delivery. Technical data Article number: 6997948 SKU: 6997948-Tungaloy Manufacturer SKU: TUN6997948 Model series: ISO turning indexable inserts ISO designation: TCGT110204 Facts Corner radius: 0.4 mm Thickness: 2.38 mm Inscribed size: 11 mm Clearance angle: 7° Included angle: 60° Design / Special features Uncoated cermet cutting material, grade NS9530 Triangular insert form With hole: cylindrical hole + single-side countersink (40°–60°) One-sided chipbreaker For external and internal turning Requires a compatible holder, shim/clamping set and replacement screws FAQ What materials is this insert best suited for? The TCGT110204 NS9530 insert is a finishing grade optimised for steel; the uncoated NS9530 cermet composition delivers a sharp edge and low cutting forces suited to continuous finishing cuts. How does the insert mount to a holder? Mounting relies on the cylindrical hole with a single-side countersink (40°–60°) to ensure secure seating; use the correct ISO-compatible holder and clamping set to match the TCGT 110204 geometry. What cutting applications does this grade target? The NS9530 grade is intended for finishing operations with small depths of cut and continuous cuts, where surface quality and low cutting forces are priorities. Which chipbreaker should be selected? Choose the chipbreaker in line with the workpiece material and the stability of the setup; the one-sided chipbreaker supplied with this insert is tailored to produce stable chips on steels in finishing conditions. What are the key dimensions to check when selecting a holder? Verify the inscribed size (11 mm), thickness (2.38 mm), corner radius (0.4 mm) and ISO designation TCGT110204 to ensure holder compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110204 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp cermet grade and precise ISO geometry for superior finishing performance and stable chip control; order the TCGT110204 NS9530 indexable turning insert directly via Metav Werkzeuge or consult the specialists for matching holders and clamping sets. TCGT 110204 NS9530 indexable turning insert for Turning — Tungaloy TCGT 110204 NS9530 is an ISO-specification triangular indexable turning insert designed for finishing operations on steel; features include a sharp uncoated cermet grade and an ISO-compatible geometry for reliable toolholding. Uncoated cermet for superior surface finish Sharp cutting edge for finishing steel 0.4 mm corner radius, 7° clearance ISO triangular insert, size 11, 2.38 mm thick High-quality finishing with uncoated NS9530 cermet The uncoated cermet grade NS9530 is engineered for finishing operations on steel, offering a sharp cutting edge and reduced cutting forces that together deliver an improved surface finish. As a finishing grade, the material is optimised for continuous cutting and smaller depths of cut, which reduces vibration and supports consistent part geometry. The insert's edge preparation and substrate characteristics mean better stability at low feed rates and a longer usable edge life in steady, low-interruption turning. Reliable ISO fit and precise geometry for consistent results Compatibility with standard toolholders is defined by form, clearance, tolerance class, fixing method, size and thickness; the ISO designation ensures straightforward selection of a matching holder. The triangular shape with an included angle of 60°, 0.4 mm corner radius and 7° clearance provides predictable contact conditions and repeatable seat location. The insert is supplied with hole and a cylindrical hole plus a one-sided countersink (40°–60°), which simplifies clamping and alignment in many common external and internal turning fixtures. Practical machining advice to increase productivity The insert is intended primarily for external and internal finishing turns on steel where low cutting forces and high surface quality are priorities. Choose a holder that provides sufficient rigidity and select the one-sided chipbreaker geometry that matches continuous machining. The ISO system concept—insert, suitable holder or boring bar, backing/clamping set and replacement screws—permits fast index changes and predictable setup times. If additional process data or holder recommendations are needed, Metav Werkzeuge can provide detailed assistance by email or phone at info@metav-werkzeuge.com and +49 2822 7131930. Choose the Tungaloy NS9530 finishing insert for superior surface finish and stable cutting performance — contact Metav Werkzeuge for ordering and expert advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6997952 SKU: 6997952-Tungaloy Manufacturer article number: TUN6997952 Model series: ISO indexable turning inserts Grade: NS9530 (uncoated cermet) Material: cemented carbide / cermet ISO designation: TCGT110204 Core data Size: 11 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle (relief): 7° Included angle: 60° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Uncoated cermet grade NS9530 for finishing steel Sharp cutting edge and low cutting forces One-sided chipbreaker suitable for continuous cuts Triangular insert, ISO standard geometry Compatible with matching external holder or boring bar, backing/clamp and screws Intended for external and internal turning; small depths of cut and finishing feeds FAQ Which materials is this insert suitable for? The TCGT110204 NS9530 insert is a finishing grade optimised for steel; the uncoated cermet substrate delivers low cutting forces and high surface quality for continuous turning on steel. What machining operations are recommended? Designed for external and internal finishing, the insert performs best with continuous cuts and small depths of cut where high surface finish and low forces are required. How is compatibility with holders determined? Compatibility depends on insert form, relief/clearance angle, tolerance class, fixing method, size and thickness; the ISO designation facilitates selection of a matching holder and clamping set. What are the key geometry specifications to consider? Key specs include a 0.4 mm corner radius, 7° clearance, 60° included angle, size 11 and 2.38 mm thickness; the insert includes a cylindrical hole with a one-sided countersink for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110204 SH7025 Tungaloy Wendeplatten - Tungaloy
Take advantage of the SH7025 grade and coated carbide construction for stable cutting and long edge life; the 60° triangular geometry and 0.4 mm corner radius support fine finishing in varied turning operations. Order the TCGT110204 SH7025 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT 110204 SH7025 – indexable turning insert, coated carbide, 60° triangle – Tungaloy TCGT110204 SH7025 is an ISO-indexable triangular insert designed for general turning where small tools or variable engagement conditions demand a tough, edge-stable grade. ISO triangle insert TCGT 60° geometry SH7025 coated carbide for tough edges 0.4 mm corner radius for fine turning Cylindrical hole with 40°–60° countersink High process stability and consistent chip control The coated carbide composition and SH7025 grade prioritise edge toughness and resistance to chipping, making the insert particularly suitable where interruptions in engagement or smaller toolholders occur. The single-sided chipbreaker supports predictable chip formation and evacuation, reducing the risk of irregular chip loads that can shorten cutting-edge life. This results in measurable gains in process stability and repeatable surface quality, especially during short overhang operations or interrupted cuts. Secure seating and precise geometry reduce vibration and improve finish As an ISO-indexable triangle, the insert’s compatibility depends on form, clearance angle and fixing arrangement; the plate’s 7° relief angle, 60° apex and 0.4 mm corner radius combine to provide a balance between strength and finishing capability. The central cylindrical hole with a single-sided countersink (40°–60°) ensures reliable clamping on compatible toolholders and minimises micro-movements at the cutting edge. In practice, this geometry delivers a consistent contact surface and helps to lower vibration, improving dimensional accuracy and surface integrity in both external and internal turning applications. System integration and practical benefits for workshop efficiency The insert is supplied as part of the ISO turning system concept and works together with a suitable external holder or boring bar, plus the required backing/clamping set and replacement screws. This modular approach simplifies logistics and reduces downtime when a plate change is needed. The 11 mm inscribed circle and 2.38 mm plate thickness are standard dimensions that ease toolholder selection; the insert is indexable and quick to replace, which supports sustained productivity and straightforward tool management on the shop floor. For specification advice or to secure genuine Tungaloy turning inserts such as the TCGT110204 SH7025, contact Metav Werkzeuge for technical consultation or to place an order via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6967515 SKU: 6967515-Tungaloy Manufacturer SKU: TUN6967515 Designation: TCGT110204 SH7025 Facts Inscribed circle: 11 mm Plate thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Apex angle: 60° Special features Coated carbide material Grade SH7025, edge-stable and tough Triangle plate form, single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO-indexable turning insert, suitable for external and internal turning System components: matching holder/boring bar, backing/clamping set, spare screws FAQ What applications suit this insert best? The triangular TCGT110204 SH7025 insert is designed for general turning tasks, including both external and internal operations where a tough, edge-stable grade is required. How does the SH7025 grade affect performance? SH7025 provides a tough, chip-resistant cutting edge that copes well with variable engagement and smaller tooling, promoting consistent performance and longer edge life. Which toolholders are compatible with this insert? Compatibility depends on insert form, relief angle, tolerance class, fixing type, size and thickness; the TCGT110204 fits holders designed for ISO triangle inserts with an 11 mm inscribed circle and central clamping via a cylindrical hole with countersink. Is the chipbreaker suitable for heavy cuts? The insert features a single-sided chipbreaker; selection of an appropriate chipbreaker and grade should be matched to the workpiece material, cutting parameters and machine/tool rigidity to achieve optimal chip control. What dimensions are critical for selecting a matching holder? Key dimensions include the inscribed circle (11 mm), plate thickness (2.38 mm), relief angle (7°) and the 60° apex geometry; these determine seating and clamping compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110204 SH7025 Wendeplatten - Tungaloy
Die Kombination aus zäher Schneidstoffsorte SH7025, ISO‑Normkompatibilität und einfacher Montage sorgt für zuverlässige Zerspanungsergebnisse und geringere Stillstandszeiten. Bestellungen oder fachliche Rückfragen direkt über Metav Werkzeuge möglich. TCGT110204 SH7025 Tungaloy turning insert — triangular ISO insert for turning, 7° clearance The TCGT110204 SH7025 is a coated carbide, ISO‑standard turning insert intended for external and internal turning operations where edge stability and toughness are required. ISO‑standard triangular insert Coated carbide grade SH7025 Single‑sided chipbreaker design Cylindrical hole with countersink Tough grade for changing engagement and small‑tool performance The SH7025 grade is a coated carbide developed for edge stability under variable cutting conditions and in smaller toolholders. Its composition prioritises toughness over extreme hardness, which reduces chipping during interrupted cuts and variable depths of cut. For production environments this translates into fewer premature indexings and a more predictable tool life; the coating supports wear resistance without sacrificing the substrate's ability to absorb shock. In plain terms, the insert provides a robust compromise between durability and reliability, helping to maintain cycle times in mixed‑batch turning work. ISO compatibility and straightforward mounting to reduce set‑up time The insert follows ISO geometry standards so compatibility with holders is determined by form, clearance angle, tolerance class, clamping and thickness. The triangular 60° geometry, combined with a 7° clearance and an inscribed size of 11, enables four usable cutting edges when indexed, while the central cylindrical hole with a one‑sided countersink (40°–60°) ensures secure clamping in most standard external holders and boring bars. This system approach simplifies tool inventory planning and shortens changeover times because holders and clamping kits can be selected to match the insert's defined dimensions. Controlled chip formation and consistent surface quality for productive turning A single‑sided chipbreaker on the insert supports chip control in common turning operations, providing a balance between chip curl and evacuation for semi‑finishing and finishing passes. Combined with the coated carbide substrate, the geometry aims to produce a consistent surface finish while limiting edge deterioration. When paired with an appropriate external holder, clamping set and replacement screws, the insert assists in achieving repeatable part tolerances and lowers scrap risk, which is particularly beneficial in high‑mix production or short batch runs. For application advice on Tungaloy SH7025 inserts or to secure genuine TCGT110204 carbide turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and rapid supply. Technical data Article number: 6967547 Manufacturer SKU: TUN6967547 SKU: 6967547-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.4 mm Included angle: 60° Clearance (relief) angle: 7° Thickness: 2.38 mm Inscribed circle / size: 11 Special features Shape: triangular Grade: SH7025 Material: coated carbide Chipbreaker: single‑sided Central hole: with cylindrical hole + one‑sided countersink (40°–60°) Typical application: external and internal turning System components: insert, matching external holder or boring bar, seating/clamp set and replacement screws FAQ What work does this insert suit best? The TCGT110204 SH7025 insert is intended for external and internal turning where a tough, edge‑stable coated carbide grade is required, especially in smaller tools or variable engagement conditions. How many cutting edges are available per insert? With its triangular 60° geometry the insert provides up to three usable cutting edges per index; practical edge life will depend on cutting parameters and workpiece material. Is the insert compatible with standard ISO holders? Compatibility is ensured by the ISO geometry of the insert; the form, 7° clearance, thickness and central hole specification determine fit in ISO‑compliant holders and boring bars. What advantages does the SH7025 grade deliver? The SH7025 grade combines a wear‑resistant coating with a tougher substrate to improve resistance to chipping and maintain edge integrity under interrupted cuts or variable depths of cut. Are there recommended system components for reliable clamping? A matching external holder or boring bar, the correct seating/clamp set and replacement screws are recommended to exploit the insert’s geometry and obtain consistent clamping and repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110204 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH7025, a compact 0.4 mm nose radius and ISO conformity for reliable, productive turning operations; order directly via Metav Werkzeuge or contact our consultants for application advice. TCGT110204 SH7025 indexable insert for turning, triangular ISO turning insert by Tungaloy TCGT110204 SH7025 is a triangular ISO indexable insert developed for general turning where stable cutting edges and consistent performance are required. Coated carbide grade SH7025 for edge stability Triangular 11 mm insert with 60° included angle 0.4 mm nose radius for finishing and profiling 7° relief angle for secure cutting clearance Cylindrical hole with 40°–60° countersink for clamping Consistent cutting performance from a tough coated grade The SH7025 grade is a coated carbide designed for high edge stability and dependable performance in turning. Its formulation favours toughness, which reduces chipping under variable cutting conditions and during interrupted cuts. For production environments where tool changes are frequent or cutting depths vary, this translates into fewer scrap parts and longer intervals between indexings. Coated carbide means a thin protective layer is applied to the substrate to improve wear resistance and reduce adhesion; this helps maintain a predictable cutting edge across batches and supports stable cycle times on the shop floor. ISO conformity and simple toolholder compatibility Delivered as an ISO triangular insert, the geometry conforms to ISO standards for shape, size and mounting. Compatibility with a toolholder is determined by the insert form, relief angle, tolerance class, clamping method, size and thickness. The 11 mm inscribed circle and 2.38 mm plate thickness are standardised dimensions that make selection and replacement straightforward. A central hole with a cylindrical bore and a one-sided countersink (40°–60°) ensures secure clamping and repeatable seating, which reduces set-up time and improves process reliability in multi-shift operations. Geometry tailored to surface finish and chip control A 0.4 mm nose radius together with a single-sided chipbreaker provides a balance between surface finish and tool strength: the small radius supports fine profiles and close tolerances, while the chipbreaker helps form manageable chips for evacuation. The 7° relief helps avoid rubbing and reduces cutting forces at shallow engagement, and the triangular form delivers three usable cutting edges per insert, improving cost efficiency. For operators aiming for consistent surface quality, this geometry is particularly suited to finishing passes and light profiling where dimensional accuracy is important. Application guidance for productive turning This insert is intended for general turning operations, especially where engagement conditions change or where smaller tooling is preferred. The combination of a tough coated grade and compact geometry leads to productive machining with good resistance to edge breakage. When selecting an insert grade and chipbreaker, match the SH7025 characteristics to the workpiece material and machining strategy: choose more stable clamping and conservative feeds when machining interrupted surfaces, and exploit the grade’s toughness when occasional shocks or variable depths of cut occur. For further technical data or advice on integration into existing tooling systems, contact Metav Werkzeuge or request tailored recommendations by e‑mail or telephone. For productive, reliable turning with Tungaloy’s SH7025 grade, contact Metav Werkzeuge for expert application advice and fast supply. Technical data Article number: 6967530 Manufacturer SKU: TUN6967530 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Dimensions & angles Inscribed circle / size: 11 mm Plate thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 60° Materials & special features Material: coated carbide (beschichtetes Hartmetall) Grade: SH7025 Plate form: triangular Hole: with cylindrical hole and one-sided countersink (40°–60°) Chipbreaker: one-sided FAQ What turning applications suit this triangular insert? This triangular ISO insert is designed for general turning tasks where stable cutting edges and good chip control are required; the SH7025 grade performs well where engagements vary or on smaller toolholders. How does the SH7025 grade benefit tool life? The SH7025 coated carbide provides enhanced edge stability and toughness, reducing the risk of chipping and extending usable life between indexings under variable cutting conditions. Is the insert compatible with standard ISO toolholders? Yes — the insert follows ISO form and dimensional standards; compatibility depends on matching the insert form, relief angle, size and thickness with the holder specification. What clamping features does the insert use? The insert has a cylindrical central hole with a one-sided countersink (40°–60°) to enable secure and repeatable clamping in compatible holders. Can this insert be used for finishing passes? Yes — the 0.4 mm nose radius and chipbreaker make it suitable for finishing and profiling where a fine surface finish and dimensional accuracy are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110204 SH725 Wendeplatten - Tungaloy
Benefit from an ISO‑compatible triangular insert that combines the SH725 tough coated carbide with a compact 11 mm size and a 60° geometry for steady turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TCGT 110204 SH725 — Turning insert Tungaloy The TCGT 110204 SH725 is an ISO triangular turning insert designed for external and internal turning, offering a 60° geometry for versatile engagement. ISO triangular insert 60° SH725 coated carbide for edge stability Triangular 11 mm size for small tooling Cylindrical hole with one‑side countersink Consistent cutting with a tough coated grade The SH725 coating is a tough, edge‑stable coated carbide grade developed for turning under variable engagement conditions. As a consequence, the insert offers improved resistance to chipping and stable tool life when used in smaller holders or where cutting conditions change frequently. The coating assists in heat management at the cutting edge, which helps maintain consistent dimensional results and reduces the need for frequent index changes. This makes the insert suitable where steady productivity and reduced tool downtime are priorities. Simple compatibility and secure mounting for quick tool changes Designed to the ISO series, the triangular format and the specified geometry ensure straightforward selection of a compatible holder. The 60° included angle combined with a 0.4 mm corner radius and a 7° clearance angle balances strength and finish capability, while the with hole / cylindrical hole + one‑side countersink (40°–60°) ensures reliable clamping and repeatable seating. The physical dimensions — 11 mm across and 2.38 mm thickness — permit compact tool assemblies and are useful where limited overhang and rigid setups improve process stability. Application focus: turning with controlled chip formation The insert is optimised for both external and internal turning; the provided single‑sided chipbreaker promotes predictable chip flow and reduced vibration in many steel and general engineering applications. In a typical system build — insert, matching external holder or boring bar, and the correct clamp set with replacement screws — the result is a productive turning solution that supports repeatable part conformity. For changing workpiece materials or interrupted cuts, selecting this grade and its chipbreaker helps maintain edge integrity and surface quality over longer runs. Contact Metav Werkzeuge for precise application advice and to secure original Tungaloy turning inserts for reliable production performance. Technical data Article number: 6784494 SKU: 6784494-Tungaloy Manufacturer SKU: TUN6784494 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TCGT110204 SH725 Tungaloy insert Facts Geometry size: 11 mm Thickness: 2.38 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 7° Special features Coating / grade: SH725 Material: coated carbide Plate form: triangular Hole: with hole — cylindrical + one‑side countersink (40°–60°) Chipbreaker: single‑sided Intended use: turning, external and internal turning Compatibility determined by shape, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The TCGT 110204 SH725 Tungaloy insert is a coated carbide grade optimised for general turning applications; it performs well where a tough, edge‑stable grade is required, especially in variable engagement conditions. How does the SH725 grade affect tool life? SH725 provides enhanced edge stability and resistance to chipping, which can extend usable tool life for the TCGT 110204 SH725 insert under fluctuating cutting conditions and smaller toolholders. Which toolholders are compatible with this insert? Compatibility follows ISO standards; holders chosen should match the triangular 11 mm size, 60° geometry, plate thickness and the specified hole and clamping style to ensure correct seating and clamping. Can this insert be used for internal boring? Yes, the insert is suitable for internal turning as well as external operations, provided the holder offers the required rigidity and correct geometry alignment. What is the benefit of the one‑side chipbreaker? The single‑sided chipbreaker promotes consistent chip control and reduced tendency to vibrate, supporting improved surface finish and process stability when using the TCGT 110204 SH725 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com