TCMT 16T304 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough PVD-coated carbide grade, precise 60° triangular geometry and a 7° clearance for steady performance in turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. TCMT16T304 AH6235 triangular turning insert, PVD-coated carbide (Tungaloy) A TCMT16T304 AH6235 ISO triangular turning insert for external and internal turning, offering a 0.4 mm corner radius, a 7° clearance angle and a single‑sided chipbreaker for controlled chip formation Tough PVD-coated carbide grade AH6235 ISO‑standard TCMT 60° triangular shape 0.4 mm corner radius for fine profiling Single‑sided chipbreaker, with centre hole Consistent performance in demanding stainless-steel turning The TCMT16T304 AH6235 insert is engineered for robust performance when machining stainless steel and other challenging alloys. The AH6235 grade is a tougher, PVD-coated carbide designed to resist chipping under interrupted cuts and in unstable cutting conditions. This results in fewer unplanned tool changes and a steadier production flow. By selecting a grade optimised for breakage resistance, process reliability is improved while the risk of workpiece rework is reduced. Geometry that enhances accuracy and surface finish A triangular 60° geometry combined with a 0.4 mm corner radius and a 7° clearance delivers a balance between profile definition and edge strength. The small corner radius supports fine turning and accurate contouring, while the clearance angle reduces rubbing and heat build-up at the flank, contributing to a better surface finish. These geometric choices reduce the likelihood of built-up edge and make the insert suitable for finishing and semi‑finishing passes where dimensional control is essential. Secure clamping and compatibility for shop workflows ISO standardisation of the insert form ensures wide compatibility with common toolholders and boring bars; compatibility must be checked by form, clearance angle, tolerance class, attachment method, size and thickness. The insert’s centre hole and cylindrical hole style with a one-sided countersink (40°–60°) provide reliable mechanical location and clamping stability. The single‑sided chipbreaker is tailored for one-sided cutting directions, helping to guide chips away from the cutting zone and to maintain consistent chip control in serial production. Practical advantage: selection and handling Choosing the correct chipbreaker and grade according to material and process stability reduces downtime and scrap. The insert’s 3.97 mm thickness and triangular form allow cost‑effective indexing of multiple cutting edges, extending usable life per insert. For applications with interrupted surfaces or higher breakout risk, the tougher AH6235 grade mitigates edge chipping and extends edge life, offering a favourable cost‑per‑cut advantage in many turning operations. Request application advice from Metav Werkzeuge for the Tungaloy TCMT16T304 AH6235 to ensure optimal turning performance and reliable tool life Technical data Article number: 6890191-Tungaloy Manufacturer item no.: 6890191 Manufacturer SKU: TUN6890191 Label: TCMT16T304 AH6235 Tungaloy-Wendeplatte Facts Geometry angle: 60° Corner radius: 0.4 mm Thickness: 3.97 mm Inscribed circle / size: 16 mm Clearance angle: 7° Countersink angle: 40°–60° Special features Shape: triangular Coating / grade: PVD-coated carbide AH6235 Chipbreaker: single-sided Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Series: ISO turning inserts Application: Turning Material: carbide FAQ Which materials is this insert suitable for? The AH6235 grade is formulated for stainless steel and similar tough materials; the insert is suitable for external and internal turning where improved breakage resistance is required. Can the insert handle interrupted cuts? Yes, the tougher AH6235 PVD‑coated carbide is intended for applications with interrupted cutting and increased risk of chipping, offering enhanced edge robustness. How is the insert clamped and located? Clamping uses the central hole; the insert features a cylindrical hole with a one‑sided countersink (40°–60°) for secure mechanical location and stable clamping in compatible holders. What does the single‑sided chipbreaker mean in practice? A single‑sided chipbreaker is designed to control chip formation for a specific cutting direction, guiding chips away from the cutting zone and improving chip evacuation during turning. Is the insert compatible with ISO toolholders? The insert follows ISO dimensions for triangular turning inserts, but compatibility depends on form, clearance angle, tolerance class, attachment and thickness; match the insert to the holder specifications for safe use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 AH6235 Wendeplatten - Tungaloy
Combine the PVD-coated AH6235 grade with ISO-compliant TCMT geometry and a precise 0.4 mm corner radius to achieve stable chip formation and extended tool life in turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for selection and compatibility advice. TCMT16T304 AH6235 indexable insert for turning by Tungaloy — PVD-coated, 0.4 mm radius TCMT16T304 AH6235 is a triangular, ISO-format turning indexable insert intended for external and internal turning where interrupted cuts and stainless steel workpieces demand a tougher grade and controlled chip behaviour. PVD-coated grade AH6235 Designed for stainless steel & interrupted cuts Triangular insert, 16 mm size, 0.4 mm radius Cylindrical hole with 40°–60° countersink Increase throughput with a tougher PVD grade The PVD-coated AH6235 grade combines toughness with a protective coating to resist edge chipping during unstable cuts. For machining stainless steel and operations with repeated interruptions, this composition reduces unplanned tool changes and improves process stability. The result is a measurable improvement in uptime and consistent component surfaces under challenging conditions. Secure mounting and ISO compatibility for predictable results Built to ISO geometries, the insert matches standard holders by form, clearance angle and size, ensuring interchangeability within established tool systems. The 7° relief angle and a plate thickness of 3.97 mm contribute to reliable clamping and repeatable cutting conditions. The ISO conformity simplifies inventory management and reduces downtime associated with non‑standard tooling. Chip control and edge life tailored for difficult cuts The triangular form and single-sided chipbreaker are designed to direct chips away from the cut while maintaining a stable cutting edge. The 0.4 mm corner radius provides a compromise between edge strength and surface finish, making the insert suitable for medium-duty finishing and roughing passes where breakout risk is elevated. The central hole with a 40°–60° countersink supports secure fastening and correct seat location in the cutter body. Practical system benefits for the workshop As part of an insert system, the component integrates with matching external holders, shim sets and replacement screws to form a complete, serviceable solution. Standardisation across the model series helps reduce setup time and enables quicker tooling decisions on the shopfloor. Backed by Tungaloy’s manufacturing expertise, the insert offers consistent performance that supports stable process control and cost-effective production. Contact Metav Werkzeuge for availability and tailored recommendations on using the TCMT16T304 AH6235 insert in specific turning processes, or request assistance to select the appropriate holder and cutting parameters. Technical data Article number: 6890188 Manufacturer SKU: TUN6890188 SKU: 6890188-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Type designation: TCMT16T304 Grade / coating: AH6235 (PVD-coated carbide) Application: Turning Core dimensions Size: 16 mm Plate thickness: 3.97 mm Relief angle: 7° Included angle: 60° Corner radius: 0.4 mm Special features Triangular plate form Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker Carbide substrate (Hartmetall) Suited to stainless steel and interrupted cutting ISO-standard design for broad holder compatibility FAQ What materials is this insert suitable for? The TCMT16T304 AH6235 insert is formulated for machining stainless steel and is particularly resilient in interrupted cuts where edge chipping can occur. How does the AH6235 grade affect tool life? The PVD-coated AH6235 grade offers increased toughness and wear resistance, which extends edge life under unstable cutting conditions compared with uncoated grades. Is the insert compatible with standard ISO holders? Yes. The TCMT16T304 follows ISO insert geometry, so compatibility depends on matching the holder form, clearance angle, tolerance class, fastening and thickness. What advantages does the 0.4 mm corner radius provide? The 0.4 mm radius strengthens the cutting edge against breakouts while still allowing acceptable surface finish, making it suitable for mixed finishing and light roughing tasks. Can the insert handle interrupted or unstable cuts? The combination of the AH6235 grade and single-sided chipbreaker is designed to improve resistance to edge chipping, making it appropriate for interrupted and unstable turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, universal AH725 grade versatility and precise geometry for stable, cost-effective turning processes; order or request technical compatibility via Metav Werkzeuge for seamless integration. TCMT 16T304 AH725 Turning insert – PVD-coated carbide, 0.4 mm radius, Tungaloy The TCMT16T304 AH725 is an ISO-standard triangular turning insert designed for general-purpose external and internal turning, providing a balance of toughness and wear resistance for mixed-material production. PVD-coated carbide for wear resistance Universal AH725 grade for steel & stainless 60° triangular form for versatile turning 0.4 mm corner radius for fine finishing Reliable cutting performance across steels and stainless steels The combination of AH725 grade and a PVD-coated carbide substrate delivers consistent cutting behaviour under varied conditions. The coating increases surface hardness and reduces built-up edge, while the carbide core maintains fracture resistance; together these properties enhance process stability during batch runs and intermittent turning operations. The moderate 0.4 mm corner radius supports improved surface finish without sacrificing edge life, making this insert suitable for jobs where repeatable dimensional accuracy and a good finish are required. Secure seating and ISO compatibility for quick tool changes Designed as an ISO-format indexable insert, compatibility with holders depends on form, 7° clearance angle, tolerance class, fastening and the plate thickness of 3.97 mm. The centre cylindrical hole with a one-sided countersink (40°–60°) ensures positive seating and reliable clamp engagement in standard clamping systems. This construct simplifies insert changes and minimises spindle downtime; when paired with a matching external holder, the system provides repeatable positioning and fast indexability for high-mix production. Efficient chip control and predictable process behaviour The single-sided chipbreaker geometry supports controlled chip formation for typical turning operations, improving evacuation in through-turning and boring applications. The triangular 60° form offers flexibility in selecting cutting edges and angles for different cross sections, while the PVD surface treatment helps to extend edge life under moderate to high cutting speeds. For workshops seeking a pragmatic balance between tool life and cutting performance, this insert presents a productive option that reduces frequency of intervention and contributes to consistent cycle times. Contact Metav Werkzeuge for availability and detailed compatibility advice on the Tungaloy TCMT16T304 AH725 turning insert, including holder recommendations and delivery options: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6865481 Manufacturer SKU: TUN6865481 SKU: 6865481-Tungaloy Facts Radius: 0.4 mm Insert size: 16 Plate thickness: 3.97 mm Clearance angle: 7° Included angle: 60° Special features PVD-coated carbide (AH725) Universal grade for steel and stainless steels Triangular insert form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker ISO-standard indexable insert suitable for external and internal turning FAQ Which materials are suitable for this insert? The TCMT16T304 AH725 turning insert from Tungaloy is geared toward machining steel and stainless steels, with the AH725 grade offering balanced toughness and wear resistance for mixed-material production. How does the insert secure to the holder? Secure seating is achieved via the cylindrical hole with a one-sided countersink (40°–60°); clamping into a compatible ISO holder provides repeatable positioning for the Tungaloy insert (SKU: 6865481-Tungaloy). What benefit does the PVD coating provide? The PVD coating increases surface hardness and reduces adhesion of workpiece material, which improves wear resistance and helps maintain edge condition in longer cycles when using the AH725 carbide grade. Is this insert suitable for finishing operations? Yes, the 0.4 mm corner radius supports finer surface finishes while the triangular geometry permits adaptive cutting strategies; the insert is appropriate for finishing within the capabilities of the machine and holder system. How is chip control achieved with this geometry? Chip formation is assisted by the single-sided chipbreaker, which delivers controlled chip flow in typical turning tasks and reduces the risk of entanglement or unstable chip shapes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 AH725 Wendeplatten - Tungaloy
Taking advantage of the universal AH725 PVD coating and the precise 0.4 mm corner radius ensures stable chip formation and consistent surface quality in turning operations; combine process security and ISO compatibility for uninterrupted production flow. Order the insert directly via Metav Werkzeuge or consult the technical team for holder matching. TCMT 16T304 AH725 — Turning indexable insert (PVD-coated carbide, 0.4 mm radius) by Tungaloy The TCMT16T304 AH725 is an ISO-standard triangular indexable turning insert designed for external and internal turning, offering a universal, breakout-resistant grade suited to varied materials and demanding process-security requirements. TCMT16T304 ISO insert, 60° triangular geometry PVD-coated AH725 carbide for Stahl and rostfreier Stahl 0.4 mm corner radius with one-sided chipbreaker Central hole with cylindrical bore and 40°–60° countersink Consistent cutting performance for mixed-material turning The PVD-coated AH725 grade delivers a balance of wear resistance and edge stability tailored for frequent material changes and smaller toolholders. The coating reduces diffusion and adhesion at the cutting edge, so the insert maintains its geometry over longer cycles and supports stable chip formation, which in turn reduces cycle interruptions. For practitioners who require a predictable process, this grade provides a reliable compromise between toughness and hardness, improving part-to-part repeatability when machining Stahl and rostfreier Stahl. Predictable fit and geometry for accurate results Made to ISO dimensions, the insert’s 60° triangular geometry and defined form factor ensure compatibility with standard external holders when form, clearance, tolerance class, fastening, size and thickness match. The listed 7° clearance angle and 3.97 mm thickness contribute to predictable cutting engagement and mechanical support; because holder compatibility depends on these parameters, the insert can be integrated into existing tool systems with minimal adjustment. The ISO standardisation reduces setup uncertainty and supports consistent positioning, which is essential for tight-tolerance turning. Secure clamping and controlled chipbreaking for surface quality A central fastening design — a cylindrical hole with a one-sided countersink (40°–60°) — enables secure seating and reliable torque transfer to the holder, lowering the risk of micro-movement under load. Combined with the one-sided chipbreaker and 0.4 mm corner radius, the geometry favours controlled chip flow and improved finish on small radii features. This combination is particularly effective where short overhangs and higher spindle speeds are used, as the insert’s geometry dampens vibration and supports a steady cutting edge life, reducing rework and scrap rates. Practical selection guidance for process security The insert is optimised as a universal option for turning operations where machines face varying materials and stability requirements. As a universal, out-break resistant solution it is well suited for smaller tools and setups demanding high process security. Selection should match the chipbreaker and grade to the intended cut (roughing vs finishing) and the workpiece material; in many mixed-production environments, this insert reduces inventory complexity while maintaining machining reliability. For application advice and holder matching, Metav Werkzeuge’s technical specialists can support the selection of the correct chipbreaker and clamping system. Contact Metav Werkzeuge for tailored holder recommendations and to order genuine Tungaloy TCMT16T304 AH725 inserts; the technical team can advise on the best chipbreaker and mounting to secure optimal process reliability Technical data Manufacturer article number: 6856797 Manufacturer SKU: TUN6856797 Our SKU: 6856797-Tungaloy Model series: ISO turning indexable inserts Designation: TCMT16T304 AH725 Key dimensions Corner radius: 0.4 mm Insert size: 16 Included angle: 60° Clearance angle: 7° Plate thickness: 3.97 mm Features Material: carbide Coating: PVD (AH725) Chipbreaker: one-sided Hole style: central cylindrical hole + one-sided countersink (40°–60°) Plate form: triangular, ISO TCMT format Typical application: turning (external and internal) Suitable for: Stahl and rostfreier Stahl Performance focus: universal, breakout-resistant grade for high process security FAQ What materials is the insert suitable for? The TCMT16T304 AH725 insert is specified for machining Stahl and rostfreier Stahl, offering universal performance across common turning materials. How does the AH725 grade affect tool life? The AH725 PVD-coated carbide balances wear resistance and toughness, extending edge life under mixed-material production and supporting consistent cutting performance for the TCMT16T304. What must be considered for holder compatibility? Compatibility depends on matching form, clearance angle (7°), tolerance class, fastening, size (16) and thickness (3.97 mm); ensure the holder accepts ISO TCMT inserts to guarantee secure seating. What advantage does the central hole design provide? The central cylindrical hole with a one-sided countersink (40°–60°) enables secure clamping and consistent torque transfer, reducing insert movement and improving surface finish under load. Is this insert suitable for small toolholders and high-process-security applications? Yes — the universal, out-break resistant design of the AH725 grade makes this insert particularly useful for smaller tools and setups requiring high process security; TCMT16T304 offers stable chip control in such environments. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 carbide for broad material coverage, a compact 60° triangular geometry for versatile turning and a secure seating system for stable machining; order directly via Metav Werkzeuge or consult the team for application-specific guidance. TCMT 16T304 AH725 turning insert — TCMT ISO 16T304 for Turning (Tungaloy) TCMT 16T304 AH725 is a triangular ISO turning insert designed for reliable external and internal turning in a wide range of steels and stainless steels Triangle 60° geometry, ISO 16T304 PVD-coated AH725 carbide grade 7° clearance angle for secure seating 0.4 mm corner radius for fine finish Consistent performance where process security matters The PVD-coated AH725 grade is a universal, breakout-resistant carbide formulation optimised for machining steel and stainless steel under varying conditions. The coating boosts edge life and wear resistance, while the substrate supports intermittent cuts and small-tool applications. This combination delivers predictable tool life and reduced downtime, translating into measurable productivity gains. For newcomers: PVD refers to a thin, hard surface layer applied by physical vapour deposition to protect the cutting edge and improve abrasion resistance. Built for accurate clamping and geometric stability The triangular geometry with a 60° included angle and 7° clearance ensures positive engagement in standard ISO holders and contributes to stable cutting behaviour. The insert is supplied with a central hole featuring a cylindrical bore plus a single-sided countersink (40°–60°), which facilitates precise alignment and repeatable clamping. Tolerances in form, thickness (3.97 mm) and size (16 mm) are defined to secure correct seating; this reduces vibration and enhances surface finish in both external and internal turning operations. Compatibility with the toolholder is determined by shape, clearance, tolerance class, fastening method, size and thickness. Improved chip control and surface quality with a compact radius The single-sided chipbreaker and a 0.4 mm corner radius balance effective chip formation with good surface finish for finishing and light semi-finishing passes. The compact radius helps limit cutting forces while preserving edge strength, making it suitable for mixed-batch production where material and cut conditions change. The insert integrates into a standard system consisting of an ISO indexable insert, matching external holder or boring bar, shim/seat and clamping set with replacement screws; this system approach simplifies tool management and reduces set-up time on the shop floor. Contact Metav Werkzeuge for tailored tooling recommendations and reliable supply of Tungaloy TCMT 16T304 AH725 turning inserts; technical consultants are available to advise on holder choice and cutting data Technical Data Article number: 6856719 Manufacturer SKU: TUN6856719 Metav SKU: 6856719-Tungaloy Model series: ISO turning inserts Application: Turning Facts Insert designation: TCMT16T304 Size: 16 mm Thickness: 3.97 mm Included angle: 60° Clearance angle: 7° Corner radius: 0.4 mm Special features Grade/coating: AH725, PVD-coated carbide Chipbreaker: one-sided Shape: triangular Hole: with cylindrical bore + single-sided countersink (40°–60°) Typical system: insert, external holder/boring bar, shim, clamping set, replacement screws FAQ What materials is this insert suitable for? The TCMT 16T304 AH725 insert is designed primarily for steel and stainless steels, offering broad material coverage thanks to the AH725 PVD-coated carbide grade. How does the AH725 grade affect tool life? AH725 provides a wear-resistant PVD surface combined with a robust carbide substrate to improve edge stability and extend service life under mixed cutting conditions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening type, size and thickness; the insert’s ISO 16T304 geometry and central hole suit standard triangular indexable holders and boring bars. What cutting tasks suit the 0.4 mm corner radius? A 0.4 mm radius is ideal for fine finishing and light semi-finishing passes where a balance between surface quality and edge strength is required. Is the insert supplied with mounting screws? The recommended system includes the insert, an appropriate holder or boring bar, a shim or seat, a clamping set and replacement screws as standard components for complete tool assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 AH8015 Wendeplatten - Tungaloy
Reliable machining of heat‑resistant alloys is supported by the combination of a PVD‑coated AH8015 grade and a 0.4 mm nose radius, delivering balanced wear resistance and stable cutting edges for uninterrupted turning operations. The ISO triangular form ensures straightforward compatibility with standard holders. Order the insert via Metav Werkzeuge or consult our specialists for precise tool selection. TCMT 16T304 AH8015 indexable turning insert by Tungaloy — 60° triangular, PVD‑coated carbide A TCMT16T304 indexable turning insert designed for general turning of heat‑resistant alloys, compatible with ISO‑standard holders and secure clamping systems PVD‑coated AH8015 grade 60° triangular insert design 0.4 mm nose radius Cylindrical hole with 40°–60° countersink Compatible with ISO turning holders Predictable tool life for machining heat‑resistant alloys The PVD‑coated AH8015 carbide grade is tuned for a balance between wear resistance and edge stability, making it a reliable choice when machining heat‑resistant alloys. The single‑sided chipbreaker is optimised to control chips in common turning operations, reducing downtime from manual chip handling. As a result, tool changes become more predictable and cycle times remain stable, which supports consistent part quality in small and medium batch production. Geometry that reduces setup complexity and ensures repeatability The triangular 60° form with a 0.4 mm nose radius and a 7° clearance angle provides a good compromise between versatility and finish quality. The insert’s 3.97 mm thickness and central cylindrical hole with single‑sided countersink (40°–60°) deliver secure clamping in standard ISO toolholders, limiting micro‑movement during heavy cuts. These measured dimensions make holder matching straightforward and help to maintain reproducible cutting conditions across different machines. Seamless integration into production workflows Designed as an ISO‑standard indexable insert, this component fits into a typical system consisting of an ISO turning insert, a matching external holder or boring bar, shims/clamp sets and spare screws. The combination of grade and geometry supports productive turning while keeping inventory management simple. If clarification is required about holder compatibility or application parameters, Metav Werkzeuge provides selection support and technical advice; contact via info@metav-werkzeuge.com or call +49 2822 7131930 for assistance. Contact Metav Werkzeuge today for tailored advice on selecting the appropriate Tungaloy TCMT16T304 insert for a given holder and application; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6825795 Manufacturer SKU: TUN6825795 Product designation: TCMT16T304 AH8015 Tungaloy indexable insert Material: carbide Grade/coating: AH8015, PVD‑coated Facts Insert size: 16 Included angle: 60° Thickness: 3.97 mm Nose radius: 0.4 mm Clearance angle: 7° Hole style: with hole — cylindrical hole + single‑sided countersink (40°–60°) Special features One‑sided chipbreaker ISO‑standard triangular insert form Secure clamping via central hole and countersink Intended application: turning of heat‑resistant alloys System: use with matching external holder/boring bar, shims and screws FAQ What materials is this insert suitable for? The TCMT16T304 AH8015 insert is intended primarily for the general turning of heat‑resistant alloys; the AH8015 PVD‑coated carbide provides a balance of wear resistance and edge stability for these materials. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius helps to produce a stable surface finish while retaining sufficient edge strength; the geometry is suitable for medium‑ to fine‑finishing passes using an ISO‑compatible holder. Which holders are compatible with this insert form? The triangular 60° ISO form fits standard ISO turning holders and boring bars; the cylindrical central hole with single‑sided countersink ensures secure fastening in typical clamping systems. What is the chip control strategy for this grade and geometry? The insert features a one‑sided chipbreaker designed to produce controlled chip formation during external and internal turning, assisting in uninterrupted material removal and safer machine operation. Is the TCMT16T304 supplied with spare screws or clamping sets? The item is an indexable insert; a complete system typically comprises the ISO insert, a matching external holder or boring bar, shims/clamp sets and spare screws — these are supplied separately according to system requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 AH8015 Wendeplatten - Tungaloy
Take advantage of the proven combination of PVD-coated carbide wear resistance, a 0.4 mm corner radius for accurate profiling and a single-sided chipbreaker for reliable swarf control; order the TCMT16T304 AH8015 Tungaloy insert directly from Metav Werkzeuge or consult the team for application advice. TCMT16T304 AH8015 TCMT turning insert by Tungaloy — PVD-coated carbide, 0.4 mm radius A TCMT16T304 AH8015 Tungaloy turning insert designed for ISO-compliant external and internal turning, optimised for heat-resistant alloys and general turning applications PVD-coated carbide for wear resistance Triangular TCMT form, 60° included angle 0.4 mm corner radius for precise profiling Single-sided chipbreaker, with central hole and countersink Stable cutting performance for demanding turning operations The PVD-coated carbide grade AH8015 combines wear resistance and edge stability, making it a dependable choice for machining heat-resistant alloys and other demanding materials. The insert’s geometry — a 60° triangle with a 0.4 mm corner radius — provides a balance between profile accuracy and cutting strength, so the component surface finish and dimensional control improve while tool life remains consistent. Compatibility with holders is determined by form, relief angle, tolerance class, clamping arrangement, size and thickness, which ensures secure seating and repeatable positioning during production. Practical benefits of the single-sided chipbreaker and ISO form A single-sided chipbreaker simplifies chip control in many turning scenarios and reduces process variability when paired with a suitably rigid toolholder. The ISO TCMT form is widely supported by external holders and boring bars, enabling fast indexable insert changes and minimal setup time. The insert’s central feature — a cylindrical hole with a single-side countersink (40°–60°) — allows standard clamping systems to deliver consistent clamp force, which in turn reduces vibration and contributes to improved surface integrity on turned parts. Material guidance and machining recommendations This indexable insert, produced from cemented carbide, is intended as a first choice for general machining of heat-resistant alloys and comparable materials; the AH8015 grade is balanced for wear resistance and edge stability. For best results, match the chipbreaker and grade to the workpiece alloy and machining stability: more rigid set-ups benefit from sharper edge geometries, while less stable conditions profit from the 0.4 mm radius and robust edge preparation. The relief angle of 7° supports effective chip formation and helps maintain tool life across continuous and interrupted cuts. Contact Metav Werkzeuge for application support, stock information and compatibility checks — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6825771 SKU: 6825771-Tungaloy Manufacturer SKU: TUN6825771 Model series: ISO-Drehwendeschneidplatten Product designation: TCMT16T304 AH8015 Tungaloy-Wendeplatte Facts Insert size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 60° Manufacturer article number: 6825771 Special features Material: cemented carbide Coating/sort: AH8015 (PVD-coated carbide) Plate form: triangular (TCMT) Hole: with central hole; cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Typical application: turning (external and internal) Compatibility: determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What does the designation TCMT16T304 indicate? TCMT denotes the triangular insert form; 16 indicates the size, and 16T304 refers to the ISO-style dimensions and chipbreak geometry used for the TCMT16T304 AH8015 Tungaloy insert. Which workpiece materials are suitable for this insert? The AH8015 grade is optimised for heat-resistant alloys and general-purpose turning; the cemented carbide substrate with PVD coating supports good wear resistance and edge stability on these materials. How is the insert clamped in the holder? The insert features a central cylindrical hole with a single-side countersink (40°–60°), designed for standard clamping systems that ensure repeatable seating and stable fixation of the TCMT16T304 insert. Can the 0.4 mm corner radius be used for profiling? Yes, the 0.4 mm corner radius provides fine profile control and improved edge strength, making it suitable for accurate finishing passes and where a small radius is required for component geometry. Is the chipbreaker suitable for a range of turning operations? The single-sided chipbreaker offers reliable chip control for many turning tasks; selection of the exact breaker and cutting parameters should match the workpiece alloy and machining stability for optimal performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 NS9530 Wendeplatten - Tungaloy
High surface quality and reduced cutting forces result from the NS9530 uncoated cermet grade and its sharp cutting edge; the triangle geometry with a 0.4 mm corner radius supports precise finishing cuts. Order the TCMT16T304 NS9530 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT 16T304 NS9530 — Tungaloy triangle finishing turning insert (60°) A TCMT16T304 NS9530 ISO turning insert designed for finishing steel, offering a sharp edge, low cutting forces and compatibility with ISO toolholders Finishing grade NS9530 for steels Uncoated cermet for low cutting forces Triangle insert with 60° included angle Cylindrical hole with 40°–60° countersink Superior finishing performance for steel turning The NS9530 grade is an uncoated cermet specifically developed as a finishing sort for steel, delivering a high surface finish and low cutting forces in continuous cutting conditions and small depths of cut. Cermet materials combine ceramic hardness with metallic toughness, reducing built-up edge and improving dimensional consistency compared with standard cemented carbide grades. For operations where surface integrity and repeatable finish are priorities, the geometry and material pairing ensure consistent results while keeping cutting forces moderate, which benefits spindle and fixture loads. Geometry and chip control that boost productivity A triangular insert with a 60° included angle and a 0.4 mm corner radius provides a controlled contact area and predictable edge engagement, which is ideal for fine finishing passes. The single-sided chipbreaker design supports efficient chip formation during external and internal turning, reducing the risk of long swarf and improving process security. Together, these features promote longer edge life under steady feed conditions and contribute to smoother cycle times and less rework—advantages that translate directly into higher throughput and lower unit costs. Fast integration into ISO tool systems for simple changeovers Designed within the ISO turning insert system, the TCMT16T304 format matches standard holder forms and fixation parameters: size 16 with a plate thickness of 3.97 mm and a clearance angle of 7°. The insert is supplied with a cylindrical hole and single-sided countersink (40°–60°), ensuring secure clamping in compatible holders and easy positioning during toolset changes. Compatibility depends on form, clearance angle, tolerance class, fastening and thickness; correct matching with an ISO external holder or boring bar guarantees stable clamping, repeatable seating and straightforward inventory management across workshops. Material and application guidance for reliable selection Made from cemented carbide and specified as a finishing cermet, this insert is best applied to steels under continuous cutting regimes and small cross-sections where high surface quality is required. The combination of a sharp edge and the NS9530 microstructure reduces plastic deformation at the cutting edge and limits rubbing, which helps achieve the targeted finish without excessive feed reduction. For selection: pair the insert with a holder that matches the 16T304 ISO code and verify the clamp and seat geometry; for further process optimisation, Metav Werkzeuge can advise on matching chipbreaker and parameter settings for specific steel grades. For specification support or volume enquiries about the Tungaloy TCMT16T304 NS9530 finishing inserts, contact Metav Werkzeuge for technical advice and rapid supply. Technical data Article number: 6998518 SKU: 6998518-Tungaloy Manufacturer SKU: TUN6998518 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Model designation: TCMT16T304 NS9530 Tungaloy turning insert Facts Size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 60° Hole style: cylindrical hole + single-sided countersink (40°–60°) Design & special features Material: cemented carbide Grade: NS9530 (uncoated cermet finishing) Insert shape: triangle Chipbreaker: single-sided Application: turning (external and internal) Compatibility: ISO turning insert system With hole: yes (cylindrical + countersink) FAQ What materials is this insert best suited for? The TCMT16T304 NS9530 Tungaloy turning insert is specified as a finishing cermet for steel, providing excellent surface quality in continuous cutting and small-depth finishing operations. How does the NS9530 grade affect cutting performance? NS9530 is an uncoated cermet grade that reduces built-up edge and cutting forces, which helps achieve a smoother surface finish and more consistent dimensional results compared with conventional grades. Which geometry details ensure stable clamping in holders? The TCMT16T304 features a triangle form with a cylindrical hole and a single-sided countersink (40°–60°); coupled with the 16 mm size and 3.97 mm thickness, this ensures secure seating in compatible ISO holders. Is the insert suitable for both external and internal turning? Yes, the insert’s single-sided chipbreaker and triangle geometry make it suitable for external and internal turning tasks where finishing performance is required. How should the insert be matched to a toolholder? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; match the TCMT16T304 NS9530 to an ISO holder with a 7° clearance and appropriate clamp to ensure repeatable seating and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a precision finishing grade, low cutting forces and ISO compatibility to improve process stability and surface quality in turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for optimal selection. TCMT16T304 NS9530 TCMT 16T304 NS9530 Turning insert by Tungaloy The TCMT16T304 NS9530 is an ISO‑standard triangular finishing insert intended for turning; it delivers low cutting forces and excellent surface quality on steels, especially where continuous cuts and small depths of cut are required. ISO triangular insert for finishing Uncoated cermet grade NS9530 0.4 mm corner radius for fine finishes Efficient finishing for demanding steel turning The finishing grade NS9530, supplied as an uncoated cermet, is engineered for stable cut conditions and superior surface results when turning steel. Its composition supports a sharp cutting edge with reduced cutting forces, which translates into lower spindle load and predictable chip flow during continuous finishing passes. This makes the insert particularly suitable for applications where part tolerances and surface integrity are decisive, such as shaft finishing or precision external diameters. The result is reliable component quality with fewer rework cycles. Geometry that reduces force and improves surface quality The triangular ISO insert geometry combined with a 0.4 mm corner radius and a 7° relief angle creates a cutting geometry that balances edge strength with low intrusion into the workpiece. Lower cutting forces mean less vibration and improved dimensional stability; the geometry therefore supports consistent machining windows and smoother finishes. The insert’s 0.4 mm radius helps achieve a fine surface texture while the overall angle and thickness maintain edge robustness for repeatable performance. Practical compatibility and mounting guidance for production As an ISO‑norm insert, compatibility with holders is governed by the insert form, relief angle, tolerance class, fixing method, size and thickness. The TCMT format and 16 mm size work with standard triangular external holders or boring bars; the plate is supplied with a cylindrical hole and single‑side countersink (40°–60°) to suit common clamping systems. With a 3.97 mm thickness the insert offers a reliable seat and torque resistance in the clamp. Choosing a matching single‑side chipbreaker and the NS9530 grade according to workpiece material and cutting parameters will ensure the best combination of surface finish and tool life. For tailored selection of the TCMT16T304 NS9530 insert or advice on holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specialist guidance and prompt supply Technical Data Article number: 6997723 SKU: 6997723-Tungaloy Manufacturer SKU: TUN6997723 Model series: ISO-Drehwendeschneidplatten Designation: TCMT16T304 NS9530 Tungaloy-Wendeplatte Brand: Tungaloy Application: Turning Facts Insert size: 16 Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 60° Material: carbide Special features Grade: NS9530 (uncoated cermet) Chipbreaker: single-side Shape: triangular Hole: with hole Hole style: cylindrical hole with single-side countersink (40°–60°) Typical use: external and internal turning; finishing FAQ What materials is this insert best suited for? The TCMT16T304 NS9530 is a finishing grade designed primarily for machining steel; the uncoated cermet composition supports continuous cuts and high surface quality on steel workpieces. Can this insert be used for internal turning? Yes, the insert’s triangular form and single‑side chipbreaker make it suitable for both external and internal turning applications when paired with an appropriate boring bar. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius helps to produce a finer surface finish while maintaining sufficient edge strength for finishing passes; the geometry reduces chatter and improves dimensional consistency. Is a special holder required for this ISO insert? No special holder is required, but holder compatibility depends on insert form, relief angle, tolerance class, fixing method, size and thickness; a standard TCMT external holder or a correctly sized boring bar is typically used. What is the purpose of the cylindrical hole and countersink? The cylindrical hole with single‑side countersink (40°–60°) ensures secure clamping and correct seating in standard insert holders, improving repeatability and torque resistance during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 NS9530 Wendeplatten - Tungaloy
Conflicting product data detected: the cutting material is described both as cermet and as cemented carbide, which are not equivalent. Please verify the source data for the insert's material before a complete product description can be generated, as accurate material identification is crucial for determining the appropriate applications, performance characteristics, and compatibility of the cutting tool with specific machining tasks, ensuring that the product meets the required standards and specifications for its intended use while avoiding potential issues that may arise from incorrect or ambiguous material information provided in the initial data.
TCMT 16T304 NS9530 Wendeplatten - Tungaloy
Product data inconsistent: the field "material" is listed as Hartmetall (carbide) while "Schneidstofftyp" specifies an uncoated cermet — please verify the specification to ensure accuracy and consistency in the product description, as discrepancies like this can lead to confusion or errors in identifying the correct material properties, which are critical for determining the appropriate applications, performance characteristics, and suitability of the product for specific tasks or environments, particularly when dealing with precision tools or components where material composition directly impacts durability, efficiency, and overall functionality, making it essential to resolve any conflicting information promptly and accurately.
TCMT 16T304 T505 Wendeplatten - Tungaloy
Take advantage of the combination of economical CVD-coated carbide, precise ISO TCMT16T304 geometry and reliable single-sided chip control for efficient turning of cast iron components; order this insert directly via Metav Werkzeuge or ask the consultants for application advice. TCMT 16T304 T505 triangular indexable insert for turning – Tungaloy The TCMT16T304 T505 is an ISO-format triangular indexable insert designed for efficient external and internal turning of cast iron, offering predictable tool life and stable chip formation. CVD-coated carbide for cast iron Triangular ISO form TCMT16T304 0.4 mm corner radius for precise profiles Single-sided chipbreaker, cylindrical hole Productive cast-iron machining with consistent results The CVD-coated carbide substrate of this insert provides a hard, wear-resistant cutting edge that is optimised for economical machining of cast iron. The T505 grade combines good edge stability with wide material coverage, which results in longer tool life and fewer index changes under stable cutting conditions. For production environments where cycle time and predictability matter, this geometry and grade reduce downtime and support a steady output, while the single-sided chipbreaker improves chip control in continuous turning operations. Secure clamping and repeatable component geometry The triangular ISO TCMT16T304 form, together with the cylindrical hole plus one-sided countersink (40°–60°), ensures reliable seating and clamping in compatible external holders or boring bars. The insert’s 3.97 mm thickness and 7° relief angle contribute to robust mounting and positive load distribution at the tool tip. The 0.4 mm corner radius produces precise profile edges and helps achieve reproducible surface finishes, making the geometry well suited to batch production where tolerance stability is essential. Practical selection and system considerations for workshop use This indexable insert is intended for turning and is supplied as part of an ISO-series system that requires a matching external holder, shim/clamp set and replacement screws. The single-sided chipbreaker should be chosen according to workpiece stability, interrupted cuts and desired cutting speeds to balance productivity and finish. For customers less familiar with technical specifics, the simple rule is: prioritise rigidity and the correct chipbreaker for the material to harness the T505 grade’s economy and the insert’s reliable performance. For application guidance or to secure reliable supply of the Tungaloy TCMT16T304 T505 insert, contact Metav Werkzeuge for tailored advice and prompt delivery Technical data Article number: 6831850 SKU (seller): 6831850-Tungaloy Manufacturer SKU: TUN6831850 Numbers / Core technical data ISO designation: 16T304 Size: 16 Thickness: 3.97 mm Corner radius: 0.4 mm Included hole: with cylindrical hole and one-sided countersink (40°–60°) Relief angle: 7° Included angle: 60° Special features Material: carbide Coating / grade: T505 (CVD-coated carbide) Insert shape: triangular Chipbreaker: single-sided Intended application: turning (external and internal) System components: insert, compatible external holder or boring bar, shim/clamp set and replacement screws Compatibility determined by form, relief angle, tolerance class, attachment, size and thickness FAQ Which materials is this insert best suited for? The TCMT16T304 T505 insert from Tungaloy is optimised for machining cast iron, with the CVD-coated carbide grade offering economical performance and stable chip formation in that material. What determines compatibility with toolholders? Compatibility depends on the insert's ISO shape, relief angle, tolerance class, attachment method, thickness and size; holders designed for the TCMT form and 16 size accept this insert reliably. What are the key cutting geometries of the insert? The insert features a 0.4 mm corner radius, 3.97 mm thickness, 7° relief angle and a cylindrical hole with one-sided countersink (40°–60°), enabling secure clamping and reproducible cutting geometry. How should the chipbreaker be selected for different jobs? Select the chipbreaker based on workpiece stability, presence of interrupted cuts and the intended cutting speed; the single-sided chipbreaker on this insert aids chip control in stable turning operations. How does the T505 grade affect machining performance? The T505 grade provides a wear-resistant CVD coating that supports productive machining of cast iron, balancing abrasive wear resistance with a stable cutting edge for consistent results and reduced frequency of index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T5115 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade and the ISO 60° triangular geometry delivers consistent edge stability and extended tool life while enabling versatile external and internal turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for matching holders and clamping solutions. TCMT 16T304 T5115 indexable insert for turning — Tungaloy, CVD-coated carbide, 60° triangle A TCMT 16T304 T5115 indexable insert engineered for ISO-standard turning, optimised for cast iron with a balanced trade-off between wear resistance and cutting-edge robustness. CVD-coated carbide for wear resistance Triangle 60° form for versatile turning 7° clearance angle for stable cutting Central hole with countersink for secure fastening Consistent machining with a universal CVD grade Made from CVD-coated carbide in the universal T5115 grade, this insert is designed to provide predictable wear behaviour and reliable cutting-edge stability when machining cast iron. The coating improves resistance to abrasive wear and helps maintain a sharper edge over a longer service life, which reduces the frequency of index changes and lowers overall tooling costs. For production runs where consistency and repeatability matter, the coated substrate offers measurable process stability and a steady surface finish. ISO compatibility and simple tool-system integration The insert conforms to ISO specifications for triangular turning plates, so compatibility with holders is determined by form, clearance angle, tolerance class, clamping, size and thickness. The standardised geometry allows straightforward replacement in existing toolholders and reduces set-up time. The design with a central hole and a one-sided countersink (40°–60°) ensures secure fastening, while the 3.97 mm thickness contributes to rigidity under load. When selecting a holder, ensure the clamping and tolerance class match the insert code to guarantee concentricity and repeatable performance. Application-focused geometry and chip control The 60° triangular shape with a 0.4 mm corner radius provides a compromise between edge strength and surface finish; the radius offers robustness for interrupted cuts and acceptable part finish for finishing passes. The 7° clearance angle reduces flank rubbing, which helps maintain edge life and lowers cutting forces in typical turning operations. The single-sided chipbreaker is optimised for controlled chip formation when turning cast iron; pairing the grade with a suitable chipbreaker and stable workholding yields improved surface quality and predictable tool life. If further process parameters or alternative chipbreakers are required, technical guidance is available to match insert characteristics to the machining task. Contact Metav Werkzeuge for tailored application advice, availability and to order original Tungaloy TCMT 16T304 T5115 inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864297 Manufacturer SKU: TUN6864297 SKU: 6864297-Tungaloy Model series: ISO-Drehwendeschneidplatten Article name: TCMT16T304 T5115 Tungaloy indexable insert Facts Insert size: 16 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included hole: with hole Insert form: triangle 60° Angle: 60° Special features Grade/coating: T5115 (CVD-coated carbide) Suitable for: turning Chipbreaker: single-sided Mounting style: cylindrical hole + one-sided countersink (40°–60°) Compatibility criteria: form, clearance angle, tolerance class, clamping, size, thickness FAQ What materials is this insert optimised for? The Tungaloy TCMT 16T304 T5115 insert is a universal grade optimised for machining cast iron, combining CVD-coated carbide properties with edge stability for consistent results. Can this insert be used for both external and internal turning? Yes, the ISO 60° triangular form and the specified geometry make the insert suitable for both external and internal turning operations when mounted in the correct ISO-compatible holder. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius provides improved edge robustness for interrupted cuts while still allowing acceptable surface finish; it balances strength and finish requirements in typical turning tasks. What should be checked to ensure holder compatibility? Verify the holder matches the insert's form, clearance angle (7°), tolerance class, clamping method, size (16) and thickness (3.97 mm) to ensure concentricity and secure fastening. Does the insert come with a specific chipbreaker? This item features a single-sided chipbreaker optimised for controlled chip formation when turning cast iron, helping to maintain process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T515 Wendeplatten - Tungaloy
Economical CVD-coated carbide performance, a precise 0.4 mm nose radius and a single-sided chipbreaker combine to deliver stable chip formation and efficient cast iron turning; order the TCMT16T304 T515 insert via Metav Werkzeuge or consult the technical team for holder compatibility and application advice. TCMT 16T304 T515 turning insert by Tungaloy The TCMT16T304 T515 is an ISO-standard triangular indexable insert for external and internal turning, optimised for economical machining of cast iron with reliable chip control. CVD-coated carbide for cast iron machining Triangular 16 mm insert with 60° cutting angle 0.4 mm nose radius for accurate contours Single-sided chipbreaker, with cylindrical hole Consistent performance through CVD-coated carbide and ISO conformity The combination of a CVD-coated surface and a carbide substrate provides wear resistance and a reproducible cutting edge that supports higher process security in series production. As an ISO-standard triangular insert, the component is designed for predictable fitment: compatibility depends on form, clearance angle, tolerance class, fixation method, size and thickness. This standardisation reduces setup complexity and enables straightforward replacement when workshop schedules demand rapid tool changeovers, supporting a smoother production flow and fewer unplanned stoppages. Stable chip control and precise profiling for cast iron turning Engineered with a single-sided chipbreaker and a 0.4 mm nose radius, the insert promotes stable chip formation and consistent surface finish when turning cast iron. The 7° clearance angle and 60° geometry contribute to predictable cutting forces and good edge strength, allowing economic cutting parameters without compromising tool life. For interrupted cuts or varying workpiece stability, the selected grade and chipformer deliver balanced performance and lower total machining costs through extended intervals between indexings and fewer rejects. Robust system integration and easy handling in the workshop The insert’s triangular form with a cylindrical hole and one-sided countersink (40°–60°) suits secure clamping in compatible holders and boring bars; the 3.97 mm thickness increases rigidity in the clamping zone for stable turning operations. As part of an indexable system—insert, suitable external holder or boring bar, clamping set and replacement screws—this component integrates into existing toolrooms with minimal adjustment. Technical consultants are available to advise on holder selection and correct seat tolerance to ensure optimal performance and repeatable results. For economical, high-process-security cast iron turning with the CVD-coated carbide TCMT 16T304 T515, request a quotation or application recommendation from Metav Werkzeuge today Technical data Article number: 6747833-Tungaloy Manufacturer SKU: TUN6747833 Manufacturer article number: 6747833 Material: carbide Coating: CVD Shape: triangular ISO designation: 16T304 Model series: ISO turning indexable inserts Application: turning Facts Size: 16 mm Thickness: 3.97 mm Nose radius: 0.4 mm Clearance angle: 7° Cutting angle: 60° Special features Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Suitable for cast iron machining Designed for external and internal turning Compatible with ISO-standard holders and clamping sets FAQ What materials is this insert best suited for? The TCMT16T304 T515 insert is optimised for economical machining of cast iron and performs well where stable chip formation is required. Which holders are compatible with this triangular ISO insert? Compatibility is determined by the holder’s form, clearance angle, tolerance class, fixation and size; the TCMT16T304 T515 fits ISO-standard triangular seats when these parameters match. How does the chipbreaker influence machining? The single-sided chipbreaker on this carbide insert promotes controlled chip formation and helps achieve consistent surface finish during turning operations with cast iron. What are the key dimensional specifications to check before ordering? Check the insert size (16 mm), nose radius 0.4 mm, thickness 3.97 mm and the ISO designation 16T304 to ensure correct fit and function for the intended holder and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T6215 Wendeplatten - Tungaloy
Robust CVD-coated grade T6215 and a 0.4 mm nose radius ensure reliable wear resistance and consistent surface quality; order the TCMT16T304 T6215 insert via Metav Werkzeuge or consult our specialists for holder compatibility and cutting data. TCMT 16T304 T6215 – TCMT ISO turning insert for Drehen by Tungaloy The TCMT16T304 T6215 is an ISO triangular turning insert designed for stable to lightly interrupted machining of rostfreier Stahl, offering a CVD-coated carbide grade optimised for consistent chip control. TCMT ISO insert for turning operations CVD-coated carbide grade T6215 for rostfreier Stahl Triangle form with 60° geometry and 0.4 mm radius Central hole with cylindrical bore and 40°–60° countersink Process reliability for machining rostfreier Stahl The combination of a CVD-coated surface and the T6215 wear-resistant grade delivers predictable tool life under steady cutting conditions. This cutting insert supports consistent chip formation and a stable cutting edge, reducing flank wear and helping to maintain surface integrity on rostfreier Stahl components. The material choice—a grade of carbide engineered for abrasion resistance—translates into fewer tool changes and more reliable batch production when machining shafts, housings or general turned parts. ISO conformity and secure retention for flexible tool setups Built to ISO dimensions, the insert’s compatibility depends on form, free angle and tolerance class; the 60° triangle geometry and 7° clearance must match the chosen holder. The plate’s 3.97 mm thickness and triangular form with a central hole (cylindrical bore plus one-sided countersink) ensure secure clamping and repeatable positioning in standard TCMT holders. Selecting a matched holder and the correct clamping set keeps mounting precise and reduces the risk of vibration or poor contact, which benefits both surface finish and tool life. Productivity and application-focused advantages for turning (Drehen) As an indexable option, this insert minimises changeover time and simplifies tool management on the shop floor. The 0.4 mm nose radius provides a balance between finish and strength, suitable for fine to medium turning tasks. With a one-sided chipbreaker, the insert helps evacuate chips effectively under the specified cutting conditions, supporting steady metal removal rates and improved process stability. Choosing the correct chipbreaker and grade delivers measurable gains in machining efficiency and component quality. For production environments machining rostfreier Stahl, contact Metav Werkzeuge for supply of the Tungaloy TCMT16T304 T6215 insert or request tailored advice on holder compatibility and recommended cutting data via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 6876568 Manufacturer SKU: TUN6876568 Our SKU: 6876568-Tungaloy Facts Geometry: 60° Nose radius: 0.4 mm Clearance angle: 7° Thickness: 3.97 mm Size: 16 mm Special features Material: carbide Coating/grade: T6215 (CVD-coated) Plate form: triangular Hole style: central hole with cylindrical bore and one-sided countersink (40°–60°) Chipbreaker: one-sided Model series: ISO turning inserts Application: Drehen (turning) FAQ What materials is this insert intended for? This insert is specified for rostfreier Stahl machining; the T6215 CVD-coated grade and carbide substrate are optimised for wear resistance in that material. Which holders are compatible with this insert? Compatibility depends on holder form, free angle, tolerance class, fastening method, size and thickness; the TCMT ISO design requires a matching TCMT-style external holder or toolholder with appropriate clamping and support. How does the 0.4 mm radius affect machining results? A 0.4 mm nose radius balances surface finish and edge strength, offering improved finish for medium to fine turning while maintaining sufficient durability under stable cutting conditions. Is this insert reversible or indexed? The triangular plate offers multiple indexing positions per edge; the insert is indexable, enabling rotation to a fresh cutting edge and reducing tool change frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade (T6215), ISO TCMT geometry and a 7° relief angle for dependable stainless-steel turning and longer tool life; order directly via Metav Werkzeuge or consult our specialists for application advice. TCMT 16T304 T6215 turning insert by Tungaloy — CVD-coated carbide, 7° relief A TCMT16T304 T6215 ISO turning insert designed for external and internal turning of stainless steel under stable to lightly interrupted cutting conditions CVD-coated carbide grade T6215 ISO TCMT form, 60° triangular geometry 7° relief angle for stable cutting 0.4 mm corner radius for controlled finishing Consistent surface quality through wear-resistant grade and chip control The combination of a CVD-coated carbide matrix and the T6215 grade delivers wear resistance tailored for stainless steel machining. In practice this means fewer tool changes and a more consistent surface finish across serial production, reducing downstream rework. The insert's single-sided chipbreaker is engineered for controlled chip formation in turning operations, which improves swarf evacuation and reduces the likelihood of built-up edge. For shops seeking reproducible component quality, the insert's wear behaviour translates directly into higher process capability and reduced cycle-time variability. Secure clamping and accurate geometry for repeatable performance Built to the ISO TCMT standard with a 60° triangular form, the insert features a cylindrical hole with a one-sided countersink (40°–60°) to ensure stable seating in compatible holders. The 3.97 mm thickness and the 7° relief angle increase rigidity at the cutting edge and reduce chatter in medium-duty turning. The specified compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; these parameters determine correct pairing with an external or boring-bar holder. The 0.4 mm corner radius provides a controlled transition between roughing and finishing, allowing fine surface results without sacrificing edge strength. Practical advantages on the shop floor and in production planning Using an ISO-standard insert simplifies inventory and quick changeover: identical geometry and size mean a broad range of holders can be stocked and fitted with minimal adaptation. The TCMT geometry and the T6215 coating are particularly suited to stable to lightly interrupted cuts, making the insert a pragmatic choice where predictable tool life and uncomplicated chip control are priorities. Assembly into a complete system typically requires a matching external holder or boring bar, a support shim or clamping set and replacement screws; verifying holder compatibility before use avoids installation issues and optimises cutting performance. For reliable stainless-steel turning with Tungaloy quality, contact Metav Werkzeuge for supply and selection assistance — our consultants will advise on holder compatibility and batch supply to match production needs. Technical Data Article number: 6876498 SKU: 6876498-Tungaloy Manufacturer SKU: TUN6876498 Model series: ISO-Drehwendeschneidplatten ISO designation: 16T304 Size: 16 Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Insert shape: triangular (60°) Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Grade/coating: T6215 (CVD-coated carbide) Material: carbide Chipbreaker: single-sided Application: turning Facts Geometry angle: 60° Corner radius: 0.4 mm Plate thickness: 3.97 mm Plate size: 16 Relief angle: 7° Manufacturer article number: 6876498 Special features ISO TCMT form for broad holder compatibility CVD-coated carbide for wear resistance on stainless steel Single-sided chipbreaker for controlled swarf Cylindrical hole with countersink for secure clamping Suitable for external and internal turning under stable to lightly interrupted conditions FAQ What materials is this insert suitable for? The TCMT16T304 T6215 insert is designed primarily for stainless-steel machining; the CVD-coated T6215 grade offers wear resistance suited to stable and lightly interrupted turning. How does the 0.4 mm corner radius affect the cut? A 0.4 mm corner radius balances edge strength and surface finish, giving controlled cutting geometry that helps to achieve fine surface quality while maintaining robustness in typical turning operations. What does the hole and countersink specification mean for mounting? The cylindrical hole with a one-sided countersink (40°–60°) ensures a stable mechanical fit in compatible ISO holders; correct matching of form, size and clamping method is essential for secure seating and repeatable results. Can this insert be used for internal as well as external turning? Yes, the ISO TCMT form and the insert dimensions permit both external and internal turning when combined with a suitable boring bar or external holder. Which grade and coating does the insert use? The insert uses a T6215 grade with a CVD coating applied to a carbide substrate, optimised for wear resistance in stainless-steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T9215 Wendeplatten - Tungaloy
Order with confidence: combine high productivity, reliable wear resistance and straightforward holder compatibility for efficient turning of medium steels. Request application advice from Metav Werkzeuge or check availability with their consultants. TCMT 16T304 T9215 triangular indexable insert for Turning — CVD-coated carbide, 0.4 mm nose radius (Tungaloy) TCMT16T304 T9215 is an ISO-standard indexable insert for external and internal turning; engineered for productive machining of medium steels with continuous to light interrupted cuts CVD-coated carbide for medium steels Triangle shape, 16 mm size 7° clearance angle for stable cutting Single-sided chipbreaker, with hole High, consistent productivity for medium-steel turning The TCMT16T304 T9215 indexable insert brings a balance of wear resistance and fracture toughness that suits medium-steel applications. The CVD-coated carbide grade T9215 is formulated to sustain higher cutting rates while preserving edge integrity, so each indexable corner delivers predictable performance. For production environments where cycle time and repeatability matter, this insert enables more parts per shift without compromising surface quality. Reduced set-up complexity and ISO compatibility Designed to the ISO plate programme, the triangular insert matches a wide range of ISO holders by form, relief angle, tolerance class, attachment method, size and thickness. The standardised geometry simplifies tool selection and inventory management: one insert shape fits multiple holder types, reducing downtime. The triangular form with a central fastening hole and a cylindrical hole plus single-sided countersink ensures secure clamping and repeatable positioning during index changes. Improved process stability through geometry and coating Key geometry features — a 0.4 mm nose radius and 7° clearance angle — combine to produce stable chip formation and robust edge support. The single-sided chipbreaker is optimised for continuous to lightly interrupted cuts, promoting consistent chip evacuation and lowering built-up edge tendencies. The CVD coating contributes to thermal and abrasive resistance, extending tool life and maintaining dimensional accuracy over longer runs. Practical handling and application guidance With a plate thickness of 3.97 mm and a 16 mm inscribed circle, this indexable insert is compact yet durable for routine turning tasks. The insert is intended for turning operations where medium steels are the primary workpiece material; selecting the appropriate feed and speed according to the grade’s capability helps to exploit its wear resistance and fracture tolerance. When switching from uncoated or different grades, trial passes at conservative parameters are recommended to establish optimal cutting data. Contact Metav Werkzeuge today for tailored application advice and availability for the Tungaloy TCMT16T304 T9215; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6777821 Manufacturer SKU: TUN6777821 Material: Carbide Model series: ISO-Drehwendeschneidplatten Facts Inscribed circle: 16 mm Corner radius: 0.4 mm Plate thickness: 3.97 mm Clearance angle: 7° Main cutting edge angle: 60° Special features Coating: T9215 (CVD-coated) Chipbreaker: single-sided Plate form: triangular Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) FAQ What materials is this insert suitable for? The Tungaloy TCMT16T304 T9215 insert is intended primarily for medium steels, combining wear resistance and toughness to perform well in those applications. Can the insert be used for interrupted cuts? Yes, the CVD-coated grade T9215 and the insert geometry are suitable for continuous to light interrupted cuts, offering improved edge strength for occasional interruptions. Which holder types fit this insert? As an ISO-standard triangular insert, it is compatible with ISO external and internal turning holders that accept 16 mm TCMT inserts and the specified thickness and hole style. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius delivers a compromise between strength and finish: it supports moderate feed rates while producing a stable surface quality for typical turning operations. Is the coating suited to high-speed turning? The T9215 CVD coating increases thermal and abrasive resistance, allowing elevated cutting speeds for many medium-steel jobs, provided coolant and machining parameters are adjusted accordingly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance, a compact 60° triangular geometry and reliable compatibility with ISO clamping systems to sustain productive turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for holder matching and application advice. TCMT 16T304 T9215 Turning Insert by Tungaloy — CVD-coated carbide, 60° triangle A TCMT 16T304 T9215 indexable turning insert designed for external and internal turning in medium steel machining, combining wear resistance with fracture toughness for sustained productivity CVD-coated carbide grade T9215 60° triangular geometry for versatile turning 0.4 mm nose radius for fine profile control With hole and 40°–60° countersink for positive clamping Sustained productivity for medium steel applications The CVD-coated carbide composition of this insert, identified by grade T9215, is formulated to balance wear resistance with fracture toughness, making it a dependable choice for continuous and slightly interrupted cuts. This material pairing reduces flank wear and extends tool life, which in turn lowers tool-change frequency and supports higher part output. The clear benefit is improved process economy: fewer stoppages and more consistent component dimensions during batch and single-piece turning. Precise geometry for consistent clamping and finish Manufactured to the ISO series specification, the triangular insert features a 60° cutting angle, a 0.4 mm nose radius and a plate thickness of 3.97 mm, ensuring geometric repeatability in standard toolholders. The insert is supplied with a hole and a single-sided countersink (40°–60°) to secure a stable clamping interface, while the specified 7° relief angle helps control cutting forces and surface integrity. These attributes translate into reliable seating in matched holders and improved surface finish on turned parts, reducing rework requirements. System compatibility and application guidance The indexable plate integrates into a standard turning system consisting of the insert, a suitable external holder or boring bar, a support shim/clamping set and replacement screws. Selection of the single-sided chipbreaker and the T9215 grade should be matched to workpiece material, machining type and machine stability to exploit the insert’s potential fully. For external and internal turning tasks on medium-steel components, this solution offers a pragmatic balance of productivity and robustness while simplifying tool management across varied turning operations. For a tailored recommendation on holder compatibility and optimal cutting data for Tungaloy turning inserts, contact Metav Werkzeuge for expert support and rapid supply coordination Technical data Article number: 6774017 Manufacturer SKU: TUN6774017 SKU: 6774017-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Angle: 60° Nose radius: 0.4 mm Thickness: 3.97 mm Insert size: 16 mm Relief angle: 7° Special features CVD-coated carbide Grade T9215 Triangular insert, single-sided chipbreaker With hole and single-sided countersink (40°–60°) For external and internal turning ISO-standardised geometry Requires matching holder, shim and screws Optimised for medium-steel machining FAQ Is this insert suitable for internal boring as well as external turning? Yes. The TCMT 16T304 T9215 turning insert is specified for both external and internal turning and can be used in compatible boring bars or external holders, provided holder geometry and clamping meet ISO standards. Which materials are best machined with this grade? Grade T9215 is intended as a first choice for medium steel machining, offering a good balance of wear resistance and fracture toughness for continuous to slightly interrupted cuts. How does the insert secure to the holder? The plate is supplied with a hole and a single-sided countersink (40°–60°) to enable positive clamping; secure seating depends on matching the holder’s form, tolerance class, fastening and plate thickness. What chip control can be expected from this insert? The single-sided chipbreaker has been designed for controlled chip formation in medium-steel turning; matching the chipbreaker to workpiece and machining conditions improves evacuation and surface quality. Are replacement screws and shims required for mounting? Yes. Proper assembly requires the matching shim/clamping set and replacement screws to ensure repeatable clamping and to exploit the insert’s ISO compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, precise geometry and ISO compatibility for consistent turning performance; order the insert via Metav Werkzeuge or consult the team for application-specific advice. TCMT 16T304 T9215 Tungaloy indexable insert — CVD-coated carbide, 60° TCMT16T304 is an indexable turning insert developed for medium steel machining, offering a CVD-coated carbide grade for high productivity in continuous to slightly interrupted cuts. CVD-coated carbide T9215 for medium steel Triangular insert, 60° included angle 0.4 mm corner radius for precision finishes With hole and countersink for secure clamping Optimised cutting performance for medium steel The TCMT16T304 grade combines a CVD-coated surface with a cemented carbide substrate to deliver elevated wear resistance and reliable edge integrity during repetitive turning operations. The T9215 coating is tailored for the machining of medium-strength steel, enabling longer tool life and reduced flank wear under continuous cutting conditions. This technical pairing reduces downtime for insert changes and supports stable cycle times on automated turning centres. Geometry and compatibility that simplify setup A triangular shape with a 60° included angle and a 0.4 mm corner radius ensures a balance between cutting strength and surface finish. The insert is manufactured to ISO dimensions and features a central hole with a cylindrical hole plus one-sided countersink (40°–60°) to match common clamping systems. These characteristics make the component compatible across a wide range of external holders and boring bars, streamlining inventory and reducing holder-specific complexity. Predictable chip control and process stability The insert is supplied with a single-sided chipbreaker designed to suit the grade and the typical chip forms encountered in steel turning. With the right feed and depth settings the chipbreaker promotes controlled chip formation, aiding coolant access and evacuation. This targeted geometry supports productivity by reducing the likelihood of built-up edge and by maintaining consistent surface quality through extended tool life. Practical benefits for production workflows Key operational advantages include easy insert indexing thanks to the triangular form, consistent repeatability from one index to the next, and straightforward spare-part handling due to ISO normalisation. The moderate relief angle (7°) contributes to cutting efficiency while preserving edge robustness during slight interruptions. In practice, these features translate into fewer unscheduled stops and a stable quality level across batches. Selecting the right parameters for your application For continuous to lightly interrupted turning of medium steels, choose feed and speed settings that exploit the T9215 grade’s wear resistance without overloading the edge. Lower feeds with moderate depth of cut favour improved surface finish, while higher feeds leverage the grade for faster material removal. When machining more abrasive or heavier-interrupted conditions, consider a different geometry or grade designed for increased toughness. For application advice, availability and tailored recommendations for Tungaloy turning grades, contact Metav Werkzeuge for expert guidance and prompt supply. Technical data Article number: 6772464 Facts Manufacturer SKU: TUN6772464 SKU: 6772464-Tungaloy Model series: ISO-Drehwendeschneidplatten Type designation: TCMT16T304 (ISO 16T304) Shape: triangular (60°) Size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Grade/coating: T9215, CVD-coated cemented carbide Material: cemented carbide Application: Turning (external and internal) Special features Single-sided chipbreaker ISO-compliant insert dimensions Compatible with standard outer holders and boring bars Suited to continuous to lightly interrupted cuts in medium steel Balanced wear resistance and fracture toughness FAQ What materials is this insert designed for? The TCMT16T304 T9215 indexable insert is optimised for medium-strength steel applications, where the T9215 CVD-coated carbide provides a good balance of wear resistance and toughness. Is the insert compatible with standard ISO turning holders? Yes, the insert follows ISO dimensions (16T304) and the hole plus countersink design ensures compatibility with common clamping systems for triangular turning inserts. What is the corner radius and how does it affect finish? The insert has a 0.4 mm corner radius; this radius supports improved surface finish while maintaining sufficient edge strength for general turning operations. Can the insert handle interrupted cuts? The grade and geometry are aimed at continuous to lightly interrupted cuts; for heavy interruptions a tougher geometry or different grade may be advisable. How many cutting edges are available per insert? The triangular form offers multiple indexed edges; exact usable edges depend on the chosen orientation and wear limits, providing economical indexable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide T9215 for reliable wear resistance and fracture toughness together with the ISO‑compatible TCMT triangular geometry for stable, high‑productivity turning; order the TCMT16T304 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT16T304 T9215 Tungaloy turning insert — triangular 60° geometry, 0.4 mm radius TCMT16T304 T9215 is an ISO‑standard triangular indexable insert designed for productive turning in medium steel applications CVD‑coated carbide grade T9215 Triangle 60° geometry, 0.4 mm radius Designed for medium steel machining Cylindrical hole with single‑side countersink (40°–60°) High productivity for medium‑steel turning The CVD‑coated carbide grade T9215 is engineered to combine enhanced wear resistance with reliable fracture toughness, making it a pragmatic choice for continuous and lightly interrupted cuts in medium steel. This balance reduces the frequency of tool changes and supports stable chip formation, which directly improves process efficiency and component consistency. For contract machine shops and production lines aiming for high throughput, this grade delivers repeatable performance and a measurable effect on machining uptime. Geometry that secures consistent surface quality The triangular 60° geometry with a 0.4 mm corner radius gives a strong cutting edge and predictable engagement with the workpiece. The one‑side chipbreaker is tailored to evacuate swarf effectively in standard turning conditions, lowering the risk of workpiece damage and reducing secondary operations. As the insert is ISO‑compliant, selection of a matching external holder or boring bar is straightforward when the form, clearance angle, tolerance class, fastening and thickness are checked, ensuring interchangeability across established tool systems. Practical dimensions and simple integration With a nominal size of 16 and a plate thickness of 3.97 mm, the insert fits common ISO toolholders specified for TCMT‑style plates. The presence of a cylindrical hole with a single‑side countersink (40°–60°) facilitates secure mounting and repeatable seat positioning, which shortens set‑up times and reduces variability between insert changes. The mechanical data support fast replacement cycles and predictable clamping torque requirements, helping keep changeover intervals short and process flow steady. Why this grade pays off in production Choosing a purpose‑matched cutting grade reduces overall machining cost by extending tool life and keeping component tolerances within target across production runs. The combination of T9215 performance characteristics and the robust triangular form provides a cost‑effective route to higher machine utilisation. For operations focused on reproducibility and stable surface finish, the insert’s construction and geometry represent a reliable investment that supports sustained productivity and fewer unscheduled stops. For tailored application advice or to specify TCMT16T304 T9215 inserts from Tungaloy for a current project, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — for fast and competent assistance Technical data Article number: 6774074 Manufacturer SKU: TUN6774074 SKU: 6774074-Tungaloy Model series: ISO indexable turning inserts Facts Size: 16 Thickness: 3.97 mm Clearance angle: 7° Cutting angle: 60° Corner radius: 0.4 mm Countersink: 40°–60° Materials & features Material: carbide Coating: CVD (grade T9215) Shape: triangular Hole: cylindrical with single‑side countersink Chipbreaker: single‑sided Application: turning Compatibility: ISO‑compliant FAQ Which materials is this insert best suited for? The TCMT16T304 T9215 insert is primarily specified for medium steel machining, where its CVD‑coated carbide composition offers an appropriate balance between wear resistance and toughness. What is the corner radius and why does it matter? The insert features a 0.4 mm corner radius, which helps to produce a durable cutting edge and supports consistent surface finish while limiting cutting forces for many turning operations. How is compatibility with toolholders ensured? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; the TCMT16T304 is ISO‑compliant, so matching ISO TCMT external holders or boring bars is customary. What does the T9215 grade indicate? T9215 denotes a CVD‑coated carbide grade optimised for medium‑steel applications, offering a compromise between wear resistance and fracture toughness that favours productivity in continuous to lightly interrupted cuts. Does the insert require a specific mounting screw or clamping set? The insert uses a central hole with a cylindrical recess and a single‑side countersink; secure clamping requires the appropriate seat and screw as specified by the holder manufacturer and the ISO style of the insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 16T304 T9215 Wendeplatten - Tungaloy
Combine the T9215 grade's wear resistance with the CVD-coated carbide substrate and 60° triangular geometry to secure consistent productivity and longer tool life; order the insert via Metav Werkzeuge or consult our application specialists for selection advice. TCMT 16T304 T9215 Indexable Turning Insert for Turning — Tungaloy The TCMT16T304 T9215 is an ISO-standard triangular insert engineered for efficient external and internal turning of medium steels. CVD-coated carbide T9215 grade Optimised for medium steel machining 60° triangular insert with 0.4 mm radius Suitable for continuous to light interrupted cuts Proven wear resistance for productive turning The CVD-coated carbide substrate in grade T9215 combines high wear resistance with reliable fracture toughness, making it a rational choice for productive turning operations on medium steel. This composition reduces flank wear under sustained cutting and supports higher cutting speeds, which in turn lowers cycle times and increases throughput. Selection of this grade is particularly beneficial where consistent tool life is required across series production or extended batch runs, helping to reduce tool-change frequency and non-productive downtime. Improved chip control and surface integrity A single-sided chipbreaker paired with the 60° triangular geometry and a 0.4 mm corner radius offers controlled chip formation and favourable cutting forces for typical finishing and semi-finishing passes. Controlled chips prevent tangling and evacuation issues at the tool tip, resulting in steadier machining and improved surface quality. The result is fewer rework cycles, less operator intervention and a more predictable machining process for both external and internal turning tasks. ISO compatibility for straightforward integration As an ISO-standard insert, compatibility with holders is determined by form, clearance angle, tolerance class, fastening and size. The insert features a cylindrical hole with a one-sided countersink (40°–60°) to suit a wide range of clamping systems designed for TCMT-style inserts. This standardisation simplifies spare-part management on the shop floor and enables rapid integration into existing tool holders without requiring bespoke fixtures or adapters. Cost-efficiency through optimised application Using a grade developed for medium steel enables efficient material removal while maintaining tool life, which improves the cost-per-part calculation in high-volume or repeat production. The combination of continuous to light interrupted cut capability and robust coating technology supports higher metal-removal rates where machine stability permits. Over time, this translates into measurable savings in tooling expenditure and greater overall process reliability. Secure clamping and practical dimensions The insert's 3.97 mm thickness, triangular form and central hole design ensure secure clamping in compatible toolholders, reducing the risk of micro-movements that can degrade tolerances or surface finish. The specified 7° clearance angle contributes to lower friction and helps to avoid rubbing in applications with limited radial engagement, while the 16 mm inscribed circle provides a familiar size for common turning setups. Application guidance and process selection For best results, match the chipbreaker and grade to workpiece material, machining type and machine stability. The insert is optimised for medium steels and works well in continuous to slightly interrupted conditions; for more severe interruptions or highly alloyed materials, consider alternative geometries or tougher grades. Metav Werkzeuge offers practical advice on selecting the correct chipbreaker style and cutting data to support stable, economical machining. For tailored recommendations on using the Tungaloy T9215 insert and for fast availability, contact Metav Werkzeuge for application support and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6772468 Manufacturer SKU: TUN6772468 Manufacturer article number: 6772468 Brand: Tungaloy Material: Carbide Grade: T9215 Model series: ISO-Drehwendeschneidplatten Facts Inscribed circle: 16 mm Thickness: 3.97 mm Clearance angle: 7° Corner radius: 0.4 mm Geometry angle: 60° Hole: with hole Countersink angle: 40°–60° Special features CVD-coated carbide Single-sided chipbreaker Triangular insert form ISO-standard turning insert Application: Turning (external and internal) Suitable for medium steel machining Designed for continuous to light interrupted cuts FAQ Which materials is this insert best suited for? The TCMT16T304 T9215 insert is designed primarily for medium steel machining; the T9215 grade balances wear resistance and toughness for this material group. What are the key dimensions and geometry of the insert? The insert has a 16 mm inscribed circle, 3.97 mm thickness, 60° triangle geometry, 0.4 mm corner radius and a 7° clearance angle; it also features a cylindrical hole with a one-sided countersink (40°–60°). How is holder compatibility determined? Compatibility with holders requires matching the insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation and central hole style support common TCMT-compatible clamping systems. For which machining conditions is the T9215 grade recommended? Grade T9215 performs well in productive turning of medium steels, particularly under continuous to light interrupted cutting conditions where a balance of wear resistance and fracture resistance is needed. What benefits does the chipbreaker provide? The single-sided chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip interference during both external and internal turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 for extended tool life and the 0.4 mm corner radius for versatile turning operations; this combination delivers robust wear and fracture resistance for efficient medium-steel production. Order the insert directly via Metav Werkzeuge or consult the team for cutting-data recommendations. TCMT 16T304 T9215 – Turning insert by Tungaloy, CVD-coated carbide The TCMT 16T304 T9215 is an ISO-standard triangular turning insert designed for medium-steel machining, offering stable chip formation and suitability for continuous to slightly interrupted cuts. ISO-standard triangular insert CVD-coated carbide grade T9215 0.4 mm corner radius for versatile turning For medium steel; continuous to light interrupted Greater productivity through wear-resistant grade and coating The combination of CVD-coated carbide and the T9215 grade provides clearly improved abrasion resistance and elevated fracture toughness compared with uncoated grades, which supports longer tool life and fewer index changes. For production environments where cycle time and repeatability matter, this specification reduces unplanned tool changes and maintains consistent part quality; the coating functions as a wear barrier, while the substrate ensures edge stability under steady cutting conditions. These attributes translate into measurable process efficiency for medium-steel turning. Precise geometry for stable clamping and repeatable accuracy A triangular insert with a 60° included angle, 3.97 mm plate thickness and 0.4 mm corner radius offers a well-balanced compromise between strength and finishing capability. The insert’s compatibility with holders depends on form, relief angle, tolerance class, clamping method, size and thickness, so the correct combination of insert, appropriate external holder or boring bar, and shim/clamp set is essential for vibration-free turning. The cylindrical hole with single-sided countersink (40°–60°) ensures secure seating and repeatable positioning for high-accuracy turning operations. Application-focused choice for consistent results in turning The cutting geometry and single-sided chipbreaker make this grade an excellent first choice for standard to moderately demanding turning of medium steel, delivering a balance of high wear resistance and fracture resistance in continuous to slightly interrupted conditions. Selecting the matching chipbreaker and grade according to workpiece material and machining stability helps to avoid edge chipping and to maintain surface quality. The complete system approach — indexable insert, compatible holder or boring bar, underlay/clamp set and spare screws — simplifies tool management and supports steady production output. Contact Metav Werkzeuge to specify the TCMT 16T304 T9215 for your application and request tailored cutting data at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6773974 Manufacturer SKU: TUN6773974 SKU: 6773974-Tungaloy Label: TCMT16T304 T9215 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Product designation: TCMT16T304 Core specifications Included angle: 60° Plate size: 16 mm Plate thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Design & applications Shape: triangular Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Grade/coating: T9215 (CVD-coated carbide) Chipbreaker: single-sided Typical application: turning System components: ISO insert, holder or boring bar, underlay/clamp set, spare screws Recommended material: medium steel FAQ Which materials is this insert suitable for? The TCMT 16T304 T9215 insert is specified as a first choice for medium steel machining, combining wear resistance and fracture toughness for continuous to slightly interrupted cutting. What is the corner radius and how does it affect the cut? The insert has a 0.4 mm corner radius, which offers a balance between edge strength and surface finish, suitable for general-purpose turning where moderate robustness and finish are required. Which holder characteristics determine compatibility? Compatibility is governed by form, relief angle, tolerance class, clamping method, size and thickness; matching the TCMT 16T304 to the correct external holder or boring bar and clamp set is essential for stable performance. What are the key geometric specifications of the insert? The indexable insert is triangular with a 60° included angle, 16 mm size, 3.97 mm thickness and a cylindrical hole with a single-sided countersink (40°–60°) for secure seating. For which cutting conditions is the T9215 grade intended? The T9215 CVD-coated carbide grade is optimised for medium-steel turning, offering high wear resistance and reliable edge stability under continuous to slightly interrupted machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T9215 Wendeplatten - Tungaloy
Engineered for reliable mid‑steel turning, the CVD‑coated carbide T9215 grade and a 0.4 mm corner radius provide a balance of wear resistance and fracture toughness for stable, high‑productivity cutting; order directly via Metav Werkzeuge or consult our specialists for application advice. TCMT 16T304 T9215 turning insert for turning — Tungaloy A TCMT16T304 T9215 triangular ISO insert designed for external and internal turning of medium steels, combining a CVD‑coated carbide grade with a secure hole and countersink for reproducible clamping CVD-coated carbide grade T9215 Optimised for medium steel machining ISO triangular insert TCMT 16T304 0.4 mm corner radius, 7° clearance angle Consistent tool life for continuous production The CVD‑coated carbide composition of this grade T9215 offers a combination of wear resistance and fracture toughness, which is particularly valuable when aiming for uninterrupted production runs. For turning tasks on medium steels, the coating increases resistance to abrasive wear while the substrate maintains edge integrity under load. In practice, this means longer intervals between index changes and fewer unplanned tool exchanges, supporting a measurable increase in line utilisation and reduced process variability. Geometry engineered for repeatable accuracy The triangular geometry and ISO designation ensure straightforward integration into standard toolholder systems. The 0.4 mm corner radius together with a 7° clearance angle and a 60° wedge angle contribute to a controlled cutting action that balances surface finish and tool strength. The insert is supplied with a cylindrical hole and single‑sided countersink, enabling secure clamping that reduces vibration and improves repeatability. Such mechanical stability translates into more consistent part quality and predictable tool performance. Practical application and system compatibility Designed for both external and internal turning, the insert performs best in continuous to slightly interrupted cuts, where the combination of chip control and edge robustness yields high productivity and improved surface finish. Selection of the correct chipbreaker and grade pairing remains critical: match the chipformer to the workpiece material and the machine–workpiece setup for optimal results. Remember that the complete system comprises the insert, a compatible holder, a shim or clamping set and the correct fastening screws — together these elements determine the achievable feed rates, cutting depths and process stability. Discuss application requirements with Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability for a specific turning task or to request an offer for this Tungaloy insert Technical data Article number: 6777780-Tungaloy Manufacturer article number: 6777780 SKU manufacturer: TUN6777780 Brand: Tungaloy Label: TCMT16T304 T9215 Tungaloy insert Model series: ISO turning indexable inserts Key figures Size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Insert angle: 60° Hole style: cylindrical hole + single-sided countersink (40°–60°) Materials & features Material: carbide Coating/grade: T9215 (CVD-coated) Shape: triangular Chipbreaker: single-sided Typical application: external and internal turning Suitable cuts: continuous to slightly interrupted Compatibility: depends on holder form, relief, tolerance class, fastening, size and thickness FAQ Which materials is this insert best suited for? The TCMT16T304 T9215 insert from Tungaloy is optimised for medium steel machining and delivers reliable wear resistance and edge strength for these materials. Can this insert handle interrupted cuts? The insert is recommended for continuous to slightly interrupted cuts; for heavily interrupted conditions a more robust grade or a different chipbreaker may be preferable. What determines compatibility with toolholders? Compatibility depends on the insert form, clearance (relief) angle, tolerance class, fastening method, size and thickness — ensure the holder accepts TCMT 16T304 geometry. How should the chipbreaker be chosen? Select a chipbreaker matched to workpiece material, machining strategy and machine‑part rigidity; the single‑sided chipbreaker is suitable for the applications described in the product data. What are the key dimensions to check before ordering? Verify the 16 mm size, 3.97 mm thickness, 0.4 mm corner radius and the 7° clearance angle against the intended holder and application; SKU 6777780‑Tungaloy identifies this specific item. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated cemented carbide toughness, ISO-compatible 60° triangular geometry and a 0.4 mm corner radius for stable turning results; these characteristics support reliable chip control and reduced tool-change frequency. Order the TCMT16T304 Tungaloy insert directly via Metav Werkzeuge or consult the specialists for application guidance. TCMT 16T304 T9225 Tungaloy turning insert — ISO triangular insert for medium-to-heavy steel turning (60°) The TCMT16T304 T9225 is an ISO-standard triangular turning insert designed for robust external and internal turning, offering a balance of wear resistance and toughness for variably interrupted cuts. CVD-coated cemented carbide grade T9225 ISO 60° triangular format TCMT 16T304 Single-sided chipbreaker for controlled chips 0.4 mm corner radius for repeatable profiles Consistent performance where interruptions occur The CVD-coated, cemented carbide composition of this grade (T9225) delivers a compromise between wear resistance and toughness that is particularly valuable in medium-to-heavy steel turning where cutting conditions can vary or cuts may be slightly interrupted. Chemical vapour deposition (CVD) applies a hard, wear-resistant layer to the carbide substrate; this improves flank and crater wear behaviour while preserving the substrate’s ability to absorb shock. The result is fewer unexpected tool failures and a more predictable component finish, which contributes to steadier production flows and reduced rework. Predictable fit and accurate geometry for repeatable set-ups Built to ISO shape and size, the triangular 60° geometry (TCMT) and dimensional tolerances ensure consistent seating in compatible holders. The insert’s 7° clearance angle and 0.4 mm corner radius produce predictable contact conditions at the cutting edge, aiding surface quality and dimensional control on turned parts. The 3.97 mm plate thickness and the specified hole style (cylindrical hole with one-sided countersink 40°–60°) support secure clamping and ease of replacement in the usual external holders or boring bars. Such standardisation reduces set-up time and minimises variability between tool changes. Effective chip control and operational economy Equipped with a single-sided chipbreaker, this triangular insert promotes reliable chip formation and evacuation during turning, which lowers the risk of chip entanglement and heat concentration at the cutting edge. Stable chip control extends insert life and reduces machine downtime, increasing overall process efficiency. The insert’s robust universal grade is suitable when changing engagement or slight interruptions demand additional toughness; combined with proper holder selection and cutting parameters, it supports longer tool life and more consistent component quality. A typical system comprises the ISO insert, a matching external holder or boring bar, a backing plate or clamp set and replacement screws for quick field exchange. Discuss the TCMT16T304 Tungaloy insert with Metav Werkzeuge for specification support and secure a tailored recommendation for production needs. Technical data Article number: 6781184 Manufacturer SKU: TUN6781184 Metav SKU: 6781184-Tungaloy Model series: ISO turning inserts Material: cemented carbide Numbers / Core technical data Size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Insert angle: 60° Special features / Versions ISO triangular plate TCMT16T304 Grade/coating: T9225 (CVD-coated) Single-sided chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) Compatible with ISO holders and boring bars Intended application: turning FAQ What machining tasks is this insert best suited for? This insert is intended for turning operations, especially medium-to-heavy steel machining where toughness and wear resistance are required; the T9225 grade balances both properties. How does the T9225 grade affect tool life? The CVD-coated T9225 grade increases resistance to abrasive wear while its carbide core provides toughness for interrupted cuts, which together contribute to longer, more predictable insert life. What are the key geometry parameters to consider when selecting a holder? Consider the ISO triangular shape, 60° angle, 0.4 mm corner radius, 7° clearance angle and the plate thickness; matching these ensures secure clamping and repeatable positioning of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com