TCMT 110304 T9215 Wendeplatten - Tungaloy
Benefit from a combination of high wear resistance, consistent chip control and robust mounting for uninterrupted turning operations; order the insert directly via Metav Werkzeuge or consult technical advisers for application-specific setup and toolholder compatibility. TCMT110304 T9215 turning insert (CVD-coated carbide) by Tungaloy TCMT110304 T9215 is an ISO-format indexable insert for turning, engineered for productive medium Stahl machining in continuous to light interrupted cuts. CVD-coated carbide grade T9215 Optimised for medium Stahl machining Triangular insert with 60° cutting angle 0.4 mm corner radius, one-sided chipbreaker Consistent productivity through advanced coating and grade The CVD-coated T9215 grade combines a hard, wear-resistant coating with a tough carbide substrate to extend tool life under production loads. This balance reduces flank wear and maintains edge integrity, translating into longer cycles between indexings and less unscheduled downtime. The result is measurable productivity improvements on medium Stahl components when machining in a stable setup. Geometry engineered for reliable chip formation and surface finish A 60° triangular geometry provides economical cutting edges per insert while supporting good rigidity in the clamp. The 0.4 mm corner radius helps produce a controlled cutting profile that balances strength and finish for common turning tasks. The single-sided chipbreaker offers efficient chip control for the grade and typical cutting conditions, aiding consistent surface quality on shafts and bores. Secure fixing and mechanical stability to reduce failures The insert is supplied with hole featuring a cylindrical bore and a single-side countersink (40°–60°) to ensure secure mounting in compatible holders. A plate thickness of 3.18 mm improves resistance to breakage in interrupted cuts and when higher radial engagement is required. Combined with correct clamping and tolerance-class match, this design minimises vibration and delivers repeatable results. Practical application advice for workshop integration Designed for external and internal turning operations, this insert performs best when the chipbreaker and grade match the workpiece Stahl, machining type and machine stability. Compatibility with the toolholder is determined by insert shape, clearance angle, tolerance class, fastening method, size and thickness, so selection of the appropriate external holder or boring bar is essential for optimal performance. Cost-efficiency through fewer tool changes and predictable tool life By offering a blend of wear resistance and fracture toughness, the insert supports higher material removal rates in suitable conditions and reduces total tooling costs per component. Predictable edge behaviour and stable chip formation lower scrap risk and contribute to a more efficient production flow when used in continuous or lightly interrupted turning cycles. Suitable set-up reminders and safety notes Use ISO-standard toolholders matched to the TCMT geometry and ensure correct clearance and screw torque to prevent slippage. When switching grades or chipbreakers, validate feeds and speeds on a sample piece to confirm chip formation and surface finish before full production. This approach preserves the integrity of the cutting edge and extends insert life. For tailored recommendations on integrating the Tungaloy TCMT110304 T9215 insert into production, contact Metav Werkzeuge for technical consultation or to place an order; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774057 Manufacturer SKU: TUN6774057 SKU: 6774057-Tungaloy Model series: ISO turning indexable inserts Numbers / Core technical data ISO designation: 110304 Insert designation: TCMT110304 Grade: T9215 Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 mm Included cutting angle: 60° Clearance angle: 7° Hole: with cylindrical hole + single-side countersink (40°–60°) Designs / Special features Material: carbide substrate Coating: CVD-coated Chipbreaker: one-sided Shape: triangular Mounting: with hole and countersink for secure clamping Application: turning (external and internal) Typical use: medium Stahl machining; continuous to light interrupted cuts Compatibility: requires holder matching form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The TCMT110304 T9215 insert is optimised for medium Stahl machining; the CVD-coated carbide grade provides a balance of wear resistance and toughness for typical production steels. How is the insert secured to the holder? Mounting uses the cylindrical hole with a single-side countersink (40°–60°); correct screw torque and matching tolerance-class in the compatible holder ensure secure clamping and repeatable positioning for the insert. Can this insert be used for interrupted cuts? Yes, the T9215 grade is intended for continuous to light interrupted cuts; for heavier interruptions, verify stability and consider alternative geometries or grades suited to more severe interruptions. Which chipbreaker should be selected for finishing work? For improved surface finish in medium Stahl turning, choose a chipbreaker designed for fine chip control and lower feed rates; the one-sided chipbreaker on this insert supports good control for standard finishing operations. What should be checked for toolholder compatibility? Ensure the holder matches the insert shape, clearance angle, tolerance class, fastening method, size and plate thickness; these factors determine correct fit and performance in turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, consistent chip control and easy integration into ISO tool systems for uninterrupted production. The CVD-coated carbide grade T9215 ensures productive medium-steel turning with reliable edge life — order through Metav Werkzeuge or consult their application specialists for exact holder compatibility and delivery options. TCMT110304 T9215 Tungaloy indexable turning insert — CVD-coated carbide, 60° triangular, 0.4 mm nose radius The TCMT110304 T9215 Tungaloy is an ISO-conforming triangular indexable insert intended for external and internal turning, optimised for medium steel machining and suitable for continuous to lightly interrupted cuts CVD-coated carbide grade T9215 60° triangular insert geometry 0.4 mm nose radius for finish turning Single-sided chipbreaker, with hole and countersink Increased productivity through material and grade selection The CVD-coated carbide grade T9215 combines wear resistance with fracture toughness to support higher material removal rates in medium-steel turning. As a result, machinists benefit from longer tool life and fewer index changes per shift, which reduces downtime and improves throughput. The specification favours continuous to lightly interrupted cuts and performs well when paired with rigid fixturing and stable turret setups. Choosing this grade and the matching chipbreaker helps maintain uniform chip formation and consistent surface quality across batches, supporting reliable process windows and demonstrable productivity gains. Precise geometry for consistent surface finish and dimensional control A 60° triangular form with a 0.4 mm nose radius and a 7° relief angle delivers a balance between strength and edge definition: the radius reduces vibration and improves finish on turned surfaces, while the included angle provides secure clamping in standard triangular pockets. The insert thickness of 3.18 mm and the central cylindrical hole with single-side countersink (40°–60°) ensure repeatable seating and torque distribution when tightened, lowering the risk of micro-movements during cutting. These geometric details translate directly into shorter setup times and more consistent part tolerances when used with ISO-compatible holders and shims. System compatibility and application guidance for smooth integration ISO-standardisation means compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness. The insert integrates into a system comprising a matching external holder or boring bar, a backing pad or clamp set and replacement screws. For efficient implementation, select the correct holder and the corresponding insert pocket that matches the TCMT form and the 11 mm size parameter. The grade suits a wide range of medium steels; pairing the insert with a stable toolholding assembly and correct feeds/speeds will exploit the T9215 strengths — higher wear resistance with good resistance to chipping — and deliver consistent results in production turning. For robust, productive medium-steel turning trust Tungaloy’s TCMT110304 T9215 insert and contact Metav Werkzeuge for tailored holder recommendations and availability Technical Data Article number: 6772467 SKU: 6772467-Tungaloy Manufacturer SKU: TUN6772467 Manufacturer article number: 6772467 Model series: ISO indexable turning inserts Manufacturer: Tungaloy Numbers / Core technical data Insert designation: TCMT110304 Grade: T9215 Radius: 0.4 mm Included angle: 60° Relief angle: 7° Plate thickness: 3.18 mm Plate size: 11 Special features / Versions Material: carbide Coating: CVD Plate form: triangular Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Typical application: turning (external and internal) Suitable for continuous to lightly interrupted cuts FAQ What workpieces is this insert best suited for? The TCMT110304 T9215 insert by Tungaloy is designed primarily for medium-steel turning, delivering a balance of wear resistance and toughness suitable for continuous to lightly interrupted cuts. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius on this indexable insert improves surface finish and reduces vibration compared with a smaller radius, producing smoother turned surfaces when appropriate feed rates are selected for the TCMT geometry. Which holders are compatible with the TCMT110304 insert? Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; select ISO-compatible triangular holders that accept TCMT inserts and match the insert thickness and hole/counterbore style. Is the T9215 grade suitable for high-speed turning? The T9215 CVD-coated carbide grade provides good wear resistance and fracture toughness for productive medium-steel machining, and it performs well at elevated cutting speeds within recommended cutting parameters. What is the benefit of the cylindrical hole with countersink? The cylindrical hole with single-side countersink (40°–60°) ensures secure seating and repeatable clamping, improving rigidity and reducing the risk of insert movement during heavy or interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 for reliable wear resistance and the 0.4 mm nose radius for consistent surface finish; combine robust breaking behaviour with ISO compatibility for seamless holder interchange. Order the insert directly via Metav Werkzeuge or consult our advisors for specification support. TCMT110304 T9215 – ISO turning insert by Tungaloy for turning applications TCMT110304 T9215 is an ISO-indexable turning insert designed for external and internal turning in medium-steel machining, offering a balance of wear resistance and fracture toughness. CVD-coated carbide T9215 for medium steel ISO triangular insert TCMT 60° geometry 0.4 mm nose radius for precise finishing Cylindrical hole with single-sided countersink Increased tool life through specialised coating and grade The CVD coating combined with the T9215 grade provides elevated wear resistance while maintaining fracture toughness, which translates into longer tool life and reduced tool change frequency. CVD (chemical vapour deposition) produces a hard, adherent top layer that resists abrasive wear at elevated temperatures; this makes the insert particularly suited to productive turning of medium steel where continuous or slightly interrupted cuts are common. The result is improved process stability and fewer unscheduled interruptions. Predictable fit and secure mounting for consistent results The insert follows ISO triangular standards with a 60° included angle and is supplied with a cylindrical hole and a one‑sided countersink (40°–60°), which ensures reliable seating in compatible holders. Compatibility depends on form, clearance angle, tolerance class, fastening type, size and thickness; because these parameters are standardised, changeovers to existing ISO holders are straightforward and repeatable. The 7° clearance reduces rubbing at the flank and helps to maintain a consistent cutting geometry, which benefits dimensional accuracy and tool life. Controlled surface finish and chip control for efficient machining A 0.4 mm nose radius gives a good compromise between strength and surface quality: it supports stable cutting forces while enabling fine finishes on turned parts. The integrated single-sided chipbreaker is designed to promote short, controllable chips under medium steel conditions, reducing the risk of entanglement and improving machine uptime. For operations that demand a balance of productivity and finish, this geometry allows higher feed rates than very small radii while keeping edge strength appropriate for slightly interrupted cuts. Practical recommendations for process reliability This grade is a first choice for general medium-steel turning where productivity and repeatability are priorities. Install the insert in a fully compatible ISO holder and verify clamping torque and seat cleanliness to achieve the advertised performance. For mixed production that includes interrupted sections, the combination of CVD coating and robust substrate supports process security and predictable wear progression. For further material-specific parameter suggestions or toolholder matching, technical advice is available to support integration into the machining process. Contact Metav Werkzeuge for tailored advice on the Tungaloy TCMT110304 T9215 turning insert; technical enquiries and ordering assistance are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data Article number: 6951407 Manufacturer SKU: TUN6951407 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Coating/Grade: T9215 (CVD-coated) Facts Nose radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 mm Included angle: 60° Clearance angle: 7° Manufacturer article number: 6951407 SKU: 6951407-Tungaloy Special features Plate form: triangular Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: Drehen (turning) Schneidstofftyp: CVD-beschichtetes Hartmetall Typical system setup: ISO insert, matching external holder or boring bar, shim/clamping set and spare screws FAQ Is this insert suitable for interrupted cuts? The Tungaloy TCMT110304 T9215 insert is intended for continuous to slightly interrupted cuts; its fracture‑resistant substrate and CVD layer provide enhanced toughness for mild interruptions. Which materials is this grade best for? The T9215 grade is optimised for medium steels and offers a broad capability across standard steel grades while balancing wear resistance and breakage safety. How does the 0.4 mm nose radius affect component finish? A 0.4 mm nose radius supports improved surface quality compared with larger radii while retaining sufficient edge strength for general turning tasks, helping to achieve consistent part finishes. What holder features are required for secure mounting? A matching ISO triangular pocket with correct seat geometry, the specified clearance angle and compatible fastening are necessary; the insert’s cylindrical hole with countersink aligns and secures it in standard ISO holders. Can the insert be used for internal turning? Yes, the indexable cutting geometry and single-sided chipbreaker make the insert suitable for both external and internal turning in medium-steel applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, robust edge strength and ISO compatibility to maintain steady production and fewer tool changes; order genuine Tungaloy inserts via Metav Werkzeuge or consult our team for matching holder and clamping sets. TCMT 110304 T9215 – Tungaloy indexable turning insert for turning A TCMT110304 T9215 indexable insert designed for medium-steel turning, offering a durable CVD-coated carbide grade for continuous to light interrupted cuts. CVD-coated carbide for high wear resistance Optimised for medium steel turning 7° relief angle for stable cutting Triangular 60° form with 0.4 mm radius Consistent performance for medium-steel turning The T9215 grade is a CVD-coated carbide formulated to combine wear resistance with fracture toughness, making it a dependable choice for productive turning of medium-strength steel. The cutting material is tuned to endure the thermal and mechanical loads of continuous machining and to withstand occasional interruptions without premature chipping. By selecting a grade engineered for this material group, machining cycles remain consistent and tool-change frequency is reduced, which supports predictable manufacturing throughput. Geometry and edge form that support stable cuts The triangular plate with a 60° included angle and a 0.4 mm cutting-edge radius delivers a balanced edge for general turning tasks where moderate strength and surface finish are required. The 7° relief angle reduces rubbing on the flank and helps maintain dimensional accuracy during longer cuts. The insert’s central hole — a cylindrical aperture with a one-sided countersink (40°–60°) — provides secure clamping in compatible holders while enabling quick index changes that keep setup times short. Productivity benefits and cost-of-operation impact Using an insert with a CVD-coated surface and robust substrate translates into longer tool life under standard feeds and speeds, which improves the cost-per-component ratio. Fewer interruptions for insert replacement lower machine idle time and labour costs, and reliable edge integrity reduces scrappage. For operations prioritising throughput, the combination of the grade’s wear resistance and its fracture toughness supports higher metal removal rates while maintaining acceptable surface quality. Practical system compatibility and selection guidance This ISO-format insert fits into standard indexable turning systems; correct matching depends on holder form, relief angle, tolerance class, clamping method, size and thickness. The system typically comprises the ISO insert, a corresponding external holder or boring bar, a shim/clamp kit and replacement screws. Choose the single-sided chipbreaker variant that matches the workpiece material and stability of your setup to optimise chip control and tool life. For tailored advice on holder compatibility or to secure original Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange supply through our technical sales team Technical data Article number: 6773971 Manufacturer SKU: TUN6773971 SKU: 6773971-Tungaloy Model series: ISO turning indexable inserts Designation: TCMT110304 Grade: T9215 Substrate/coating: CVD-coated carbide Dimensions & core data Insert size: 11 Thickness: 3.18 mm Included angle: 60° Cutting-edge radius: 0.4 mm Relief angle: 7° Hole: cylindrical hole with one-sided countersink (40°–60°) Features & applications Application: Turning Chipbreaker: single-sided Material group: medium steel Compatibility: ISO holders and boring bars System components: insert + external holder/boring bar + shim/clamp set + replacement screws FAQ What materials is this insert best suited for? The T9215 grade is optimised for medium-steel machining; the TCMT110304 insert provides a balance of wear resistance and toughness suited to continuous and light interrupted turning of steel. How does the chipbreaker affect cutting performance? The single-sided chipbreaker on this insert assists chip control for typical turning feeds in medium-steel applications, improving evacuation and reducing the risk of built-up edge. Can the insert be used in interrupted cuts? Yes, the CVD-coated carbide substrate and the grade’s fracture resistance make the insert suitable for continuous turning and light interrupted cuts; for heavy interruptions, consider a different chamfer or a more robust grade. What does the central hole and countersink mean for clamping? The cylindrical hole with a one-sided countersink (40°–60°) enables secure mechanical clamping in compatible ISO holders, allowing reliable repeatable positioning and fast index changes. Which holder geometry is required for correct fit? Compatibility is determined by holder form, relief angle, tolerance class, clamping method, size and thickness; pairing the insert with the matching ISO external holder or boring bar ensures correct seating and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade that balances toughness and wear resistance for medium to heavy turning operations; the 0.4 mm corner radius and triangular ISO form deliver versatile profile control and secure clamping compatibility. Order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and holder compatibility. TCMT110304 T9225 ISO triangular turning insert — CVD-coated carbide for medium–heavy steel, 60° cutting angle — Tungaloy A robust ISO triangular turning insert, TCMT110304 T9225, engineered for external and internal turning applications where medium to heavy steel removal and occasional interrupted cuts demand increased toughness. CVD-coated carbide for durable cutting Universal grade T9225 for medium–heavy steel 0.4 mm corner radius for versatile profiles Triangular ISO insert with 60° cutting angle Reliable performance under varied turning conditions The T9225 cutting grade combines a CVD coating with a wear-resistant carbide substrate to offer a balance between hardness and toughness. This composition is designed to withstand fluctuating engagement conditions and light interruptions in the cut, giving consistent edge life across batch changes. The result is fewer unplanned tool changes and a more predictable cycle time, which supports higher productivity on mixed-production turning centres. By choosing a universal sort the machining process becomes more forgiving to variations in feed and depth of cut, while still maintaining acceptable surface finish and dimensional control. Compatibility and secure mounting for predictable cycles Compatibility with toolholders is determined by the insert’s shape, clearance angle, tolerance class, fastening, size and thickness, all of which are standardised for ISO turning systems. This triangular insert features a central hole with a dedicated countersink profile to ensure reliable clamping and repeatable seating when mounted in an appropriate ISO external holder or boring bar. Correct matching of the insert form and holder geometry ensures repeatable contact points and reduces vibration, thereby improving both tool life and part quality during external and internal turning operations. Designed for efficiency and straightforward handling A 0.4 mm corner radius offers a compromise between edge strength and profile fidelity: it gives better edge robustness than a smaller radius while still allowing controlled contouring of turned profiles. The single-sided chipbreaker reduces chip entanglement in many common turning scenarios, simplifying chip control without the need for special tooling accessories. With standard ISO dimensions and a plate thickness of 3.18 mm, stock rotation and replacement are straightforward in production environments, supporting rapid changeovers and minimal set-up time. Application focus and material suitability This insert is tailored for steel turning tasks where medium to heavy material removal is required. The grade suits a wide range of steels under variable machining conditions, making it appropriate for roughing cycles and tougher finishing passes where stability is a concern. When selecting cutting parameters, consider the insert’s intended use for interrupted cuts and choose holder rigidity and feeds that complement the grade’s toughness to avoid premature edge failure. For tailored advice on using the Tungaloy TCMT110304 T9225 insert in specific turning setups or to request availability and cutting parameters, contact Metav Werkzeuge — Metav Werkzeuge’s consultants provide practical guidance on holder matching and process optimisation Technical Data Article number: 6781001-Tungaloy Manufacturer article number: 6781001 Manufacturer SKU: TUN6781001 Model series: ISO turning indexable inserts Designation: TCMT110304 Grade: T9225 Material: Carbide Coating: CVD Facts Cutting angle: 60° Clearance angle: 7° Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 mm Special features Triangular plate form With hole; hole style: cylindrical hole + one-sided countersink (40°–60°) One-sided chipbreaker Universal grade for medium to heavy steel Compatible with ISO holders; compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The Tungaloy TCMT110304 T9225 is intended primarily for medium to heavy steel turning where robustness against interrupted cuts is required. Does the insert have a hole for secure clamping? Yes, the insert is supplied with a hole and a cylindrical hole plus one-sided countersink (40°–60°) to ensure reliable seating and clamping in compatible holders. What is the corner radius and why does it matter? The corner radius is 0.4 mm, offering a balance between edge strength and profile control; it improves edge durability while maintaining acceptable surface finish for many turning operations. Which chip control is integrated in the insert? This item features a one-sided chipbreaker, designed to promote effective chip formation and evacuation in typical turning applications. How does the T9225 grade perform under interrupted cuts? The T9225 grade is formulated for increased toughness, making it suitable for slightly interrupted cuts and variable engagement conditions encountered during medium to heavy turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, a 0.4 mm corner radius and secure clamping design for consistent turning performance and predictable tool life; order the TCMT110304 directly via Metav Werkzeuge or ask our consultants for application support. TCMT 110304 T9225 turning insert — CVD-coated carbide by Tungaloy TCMT 110304 T9225 is an ISO‑standard triangular indexable insert designed for external and internal turning in medium to heavy steel applications, offering robust performance when cuts are slightly interrupted. ISO triangular insert TCMT form CVD-coated carbide grade T9225 Suitable for medium to heavy steel turning Cylindrical hole with 40°–60° countersink Consistent performance under varying cutting conditions The insert is a CVD-coated carbide grade T9225, engineered as a robust universal grade for medium to heavy steel machining. This combination of coating and substrate delivers a favourable balance between wear resistance and toughness, which helps maintain cutting-edge integrity when engagement conditions change or when cuts are intermittently broken. As an ISO‑conforming indexable component, the design supports repeatable machining results, reducing setup variability and enabling steady cycle times in production environments. The performance focus here is on predictable tool life and dependable chip control rather than maximising single‑pass metal removal rates. Secure clamping and geometry for dimensional stability The triangular form with an included angle of 60° and a 0.4 mm corner radius provides a stable cutting edge geometry suitable for finishing and light‑to‑medium roughing. A clearance of 7° minimises rubbing and helps protect the flank face, while the cylindrical hole with single‑side countersink (40°–60°) ensures reliable seat and repeatable clamping in compatible toolholders. The 3.18 mm thickness and 11 mm inscribed circle size give structural rigidity, reducing vibration and supporting dimensional control on long‑run turning tasks. These geometric choices translate directly into better surface finishes and fewer in‑process deviations. Practical selection guidance and machining benefits Choose the single‑sided chipbreaker variant to match chip form with feed and material; the grade is suited when cutting forces vary or when a combination of toughness and wear resistance is required. Compatibility with a holder depends on form, clearance, tolerance class, mounting and size—verify that the toolholder accepts triangular ISO inserts with the listed hole and countersink style. For shops aiming to balance tool cost and uptime, this insert delivers stable chip formation and good edge life, reducing tool change frequency and supporting continuous production. For machining novices: an indexable insert allows rapid replacement of the cutting edge without regrinding, which reduces setup time and maintains process reliability. Contact Metav Werkzeuge for tailored technical advice and availability of the TCMT 110304 Tungaloy indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781154 Manufacturer SKU: TUN6781154 SKU: 6781154-Tungaloy Product designation: TCMT110304 Model series: ISO turning indexable inserts Material: carbide Key dimensions Cutting size ISO: 110304 Insert form: triangular, 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 7° Hole: cylindrical + single-sided countersink (40°–60°) Coating / Applications / Features Coating: CVD Grade: T9225 Chipbreaker: single-sided Application: turning (external and internal) Suitable materials: steel (mid to heavy) FAQ What machining tasks is this insert best suited for? The TCMT110304 T9225 insert is intended for turning operations on medium to heavy steel, offering robustness for slightly interrupted cuts and a balance of wear resistance and toughness. Which holders are compatible with this insert? Compatibility depends on holder form, clearance, tolerance class, mounting and insert size; the triangular ISO form with a cylindrical hole and single‑side countersink requires a matching triangular toolholder designed for inserts of 11 mm inscribed circle. How does the T9225 grade influence tool life? The T9225 grade, combined with a CVD coating, provides stable chip formation and good resistance to abrasive wear while keeping enough toughness for variable cutting conditions, which contributes to predictable and extended edge life. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning when mounted in an appropriate holder that supports the triangular ISO insert geometry and the specified hole/countersink configuration. What is the purpose of the 0.4 mm corner radius? A 0.4 mm corner radius offers a compromise between edge strength and surface finish: it improves edge robustness for interrupted cuts while maintaining the ability to achieve fine surface quality when feeds and depths are adjusted. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T9225 Wendeplatten - Tungaloy
Achieve consistent results in medium- to heavy-duty turning by combining the CVD-coated carbide grade T9225 with a 60° triangular geometry and a 0.4 mm corner radius; order the TCMT110304 directly via Metav Werkzeuge or consult our specialists for holder compatibility and application setup. TCMT 110304 T9225 indexable insert for turning — Tungaloy, CVD-coated carbide, 60° triangle TCMT 110304 T9225 Tungaloy indexable insert for turning TCMT110304 T9225 indexable insert by Tungaloy CVD-coated carbide for medium to heavy steel 60° triangular form with 0.4 mm corner radius Single-sided chipbreaker and central hole for clamping Precision grade for demanding steel turning The CVD-coated carbide composition of the insert delivers a balance of hardness and toughness suitable for medium to heavy steel machining. The T9225 grade is formulated as a robust universal choice, offering improved resistance to flank wear while maintaining enough fracture resistance for light interruptions in the cut. This combination reduces downtimes by extending edge life and supports consistent dimensional results when used with appropriate cutting parameters and stable workholding. Secure clamping and ISO-compatible geometry A 60° triangular plate geometry provides three usable cutting edges per index, optimising tool utilisation and cost-efficiency. The insert’s central hole with a cylindrical bore and one-sided countersink (40°–60°) ensures reliable seating and repeatable clamping forces in ISO-standard holders. With a 3.18 mm thickness and a 7° relief angle, the component sustains rigidity under heavier engagement, while the 11-size designation and overall form match common ISO turning toolholders for straightforward integration into established tool systems. Controlled chips and reliable performance under varied conditions The integrated single-sided chipbreaker promotes consistent chip formation across a range of feeds and depths of cut, helping to avoid tangling and easing chip evacuation in turning operations. A 0.4 mm radius supports transitions between finishing and roughing passes, enabling small-step roughing and improved surface integrity on interrupted cuts. The insert’s combination of chip control and ISO-standard dimensions simplifies process planning and reduces the need for frequent trial adjustments on the machine. For reliable medium-to-heavy steel turning select the Tungaloy TCMT110304 T9225 and contact Metav Werkzeuge for tailored advice or holder-matching assistance at info@metav-werkzeuge.com or on +49 2822 7131930 Technical data Article number: 6951411 Manufacturer SKU: TUN6951411 SKU: 6951411-Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts Size: 11 Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 7° Geometry angle: 60° Central hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Grade: T9225 (robust universal grade) Coating: CVD coating on carbide substrate Chipbreaker: single-sided Shape: triangular insert Typical application: external and internal turning Suitable for interrupted cuts and variable engagement FAQ What materials is this insert intended for? The TCMT110304 T9225 insert is designed primarily for medium to heavy steel machining and performs well where a tougher grade is required for intermittent cuts. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; the TCMT110304 conforms to ISO turning insert standards and fits matching ISO triangular toolholders. How does the chipbreaker influence machining? The single-sided chipbreaker on the TCMT110304 promotes predictable chip formation, which supports reliable surface finish and helps prevent chip disturbance in turned components. Is the insert suitable for interrupted cuts? Yes, the T9225 grade offers enhanced toughness compared with purely wear-focused grades, making it appropriate for light-to-moderate interrupted cutting conditions. How many cutting edges are available per indexable plate? The triangular 60° geometry provides three usable edges per insert, allowing cost-effective indexing for sequential edge use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T9225 Wendeplatten - Tungaloy
Benefit from a robust combination of CVD-coated cemented carbide and a versatile 0.4 mm corner radius for reliable medium to heavy steel turning; compatibility with ISO toolholders ensures straightforward integration into existing tool systems. Order the insert directly via Metav Werkzeuge or consult the technical team for application support. TCMT 110304 T9225 Turning insert — CVD-coated cemented carbide, 0.4 mm radius — Tungaloy The TCMT110304 T9225 is an ISO-standard triangular indexable insert for turning, engineered for medium to heavy steel machining with a single-sided chipbreaker for controlled chip flow Triangular ISO insert TCMT110304 CVD-coated carbide grade T9225 0.4 mm corner radius for versatility Designed for medium to heavy steel turning Reliable cutting performance for variable turning tasks The insert is manufactured from CVD-coated cemented carbide, grade T9225, which is formulated for toughness under changing engagement conditions and light interruptions. This material choice provides a balanced combination of wear resistance and chip resistance, so material removal remains consistent even when cutting parameters vary. As an ISO-type indexable insert, the component is designed for simple indexing and replacement; matching the insert to a suitable holder is determined by form, relief angle and tolerance class, ensuring repeatable seating and predictable tool life. The robust construction supports productivity in demanding shop-floor environments while simplifying inventory management. Designed geometry for dimensional accuracy and chip control With a nominal corner radius of 0.4 mm, an included angle of 60°, and a 7° relief angle, the insert enables a stable cutting edge geometry that helps maintain dimensional accuracy on external and internal turning operations. The 3.18 mm plate thickness and central hole with a cylindrical bore plus one-sided countersink (40°–60°) permit secure clamping and accurate centring in the holder, reducing vibration and promoting surface finish quality. The single-sided chipbreaker is optimised for moderate to heavy cuts in steel, guiding chips away from the workpiece and tool flank; this results in fewer interruptions, less rework and improved cycle-time consistency. Practical selection and application guidance Selection of the correct chipbreaker and the T9225 grade should be matched to component material, clamping rigidity and the desired cutting parameters; for typical applications choose a holder compatible with the TCMT geometry and the insert thickness to ensure correct clamping. The insert’s triangular shape allows three usable edges per index, supporting cost-efficient use in batch production. Where interrupted cuts or variable engagement occur, the toughness of this grade reduces the risk of chipping and extends service intervals. Stocks of standard ISO inserts such as this simplify procurement and enable rapid replacement during tool changes, supporting continuous workshop operation. Contact Metav Werkzeuge for application advice on the TCMT110304 insert and to confirm holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781325 Manufacturer SKU: TUN6781325 SKU: 6781325-Tungaloy Label: TCMT110304 T9225 Tungaloy-Wendeplatte Core technical data Corner radius: 0.4 mm Relief angle: 7° Included angle: 60° Plate thickness: 3.18 mm Plate size: 11 mm Materials & features CVD-coated cemented carbide (T9225) Triangular plate form With hole; cylindrical bore + one-sided countersink (40°–60°) Single-sided chipbreaker Application: turning (external and internal), medium to heavy steel FAQ What materials is this insert suitable for? The TCMT110304 T9225 insert is specified for medium to heavy steel machining; the T9225 grade provides toughness for interrupted cuts and variable engagement. How is holder compatibility determined? Compatibility depends on the insert form, relief angle, tolerance class, fixing method, size and plate thickness; confirm the holder matches the TCMT geometry before fitting. How many cutting edges are available per insert? The triangular geometry provides three indexable edges; each edge can be rotated into position for continued use until the corner radius or flank wear necessitates replacement. What are the key dimensional values to check when fitting? Important values are the 0.4 mm corner radius, 3.18 mm thickness, included angle (60°) and the central hole/countersink configuration to ensure correct clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated T9225 grade and ISO compatibility for dependable medium-to-heavy steel turning; the triangular format and 0.4 mm corner radius support consistent surface finish and stable cutting under variable engagement. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application guidance. TCMT 110304 TCMT T9225 Turning Insert (ISO 110304) by Tungaloy — CVD-coated carbide, 7° relief The TCMT110304 T9225 is a triangular ISO-standard turning insert designed for medium-to-heavy steel turning, offering robust chip control and versatile performance in interrupted or variable cutting conditions. CVD-coated carbide T9225 for robust performance ISO triangular insert, 11 mm size, 3.18 mm thick 7° relief angle with 60° insert geometry Cylindrical hole with one‑side 40°–60° countersink Improved productivity through a tough universal grade The combination of a CVD-coated surface and a wear-resistant carbide substrate provides a reliable balance between hardness and toughness, which is essential for longer tool life in demanding turning tasks. The T9225 grade is conceived as a robust universal grade for medium-to-heavy steel machining where changing engagement or light interruptions demand extra toughness rather than extreme hardness. This means more consistent cycle times and fewer indexings compared with grades that fail prematurely in unstable cuts. The triangular geometry contributes three usable edges per insert, while the 7° relief angle stabilises the cutting edge, supporting efficient material removal with fewer tool changes. Consistent surface quality and secure clamping for repeatable results A precise 0.4 mm corner radius and a dedicated single‑sided chipbreaker control the chip form and contribute directly to achievable surface finish and dimensional stability. The insert’s cylindrical hole with a one‑side 40°–60° countersink enables secure clamping and reproducible seating in compatible holders; compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness. For operators less familiar with insert‑to‑holder matching, this underlines the importance of pairing the insert with an appropriate ISO holder and clamping kit to avoid runout and ensure steady cutting forces. The result is fewer rejects and a more predictable finishing process. Practical system integration and handling benefits for the workshop The insert’s triangular format and a thickness of 3.18 mm give mechanical stability and simple indexability: three cutting edges per insert reduce downtime and improve cost efficiency per cutting edge. The ISO designation and standard dimensions support straightforward stocking and integration into existing tool sets; replacement and inventory management become simpler when ISO standards are followed. The insert is supplied with an ISO designation that matches established holders, and the overall system builds from insert to holder to clamping set and spare screws ensure quick changeover. For planners, this means less machine idle time and easier planning of consumables. For application-specific advice on Tungaloy T9225 inserts and to check current stock, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our technical team can recommend matching holders and clamping solutions Technical data Article number: 6951447 Manufacturer SKU: TUN6951447 SKU: 6951447-Tungaloy Model series: ISO turning inserts Material: carbide Name: TCMT110304 T9225 Tungaloy insert Facts ISO designation: TCMT110304 Insert size: 11 mm Thickness: 3.18 mm Relief angle: 7° Wedge angle: 60° Corner radius: 0.4 mm Special features CVD-coated carbide grade T9225 Triangular insert, single-sided chipbreaker With hole; cylindrical hole + one-side countersink (40°–60°) Designed for turning Compatibility dependent on form, relief, tolerance, fastening, size and thickness FAQ What materials is this insert suited for? The TCMT110304 T9225 insert is formulated as a robust universal grade for the medium-to-heavy machining of steel, offering good edge stability under variable engagement. How does the chipbreaker affect machining? The single‑sided chipbreaker on the TCMT110304 helps produce manageable chip forms and supports consistent surface finish during turning operations. Is the insert compatible with standard ISO holders? Compatibility is achieved when the holder matches the insert’s form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation simplifies selection. How many cutting edges are available per insert? The triangular format provides three indexable edges per insert, allowing quick rotation and economical use of each cutting edge. What clamping features should be checked before mounting? Ensure the holder accepts an insert with a cylindrical hole and one‑side countersink (40°–60°) and that the clamping hardware secures the seat to avoid runout and ensure repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of the AH6225 PVD-coated carbide grade and a 60° triangular geometry for reliable medium-duty turning of stainless steels; the secure mounting with a cylindrical hole and one-sided countersink ensures consistent clamping and repeatable results. Order the insert directly via Metav Werkzeuge or consult the sales team for application-specific advice. TCMT110308 AH6225 turning insert — PVD-coated carbide, 60° triangle by Tungaloy TCMT110308 AH6225 is an ISO-format triangular turning insert designed for external and internal turning of stainless steels, offering a sharp yet stable cutting edge for variable machining conditions PVD-coated carbide AH6225 for stainless steels Sharp yet robust cutting edge design Triangular 60° geometry for versatile turning ISO-compatible with cylindrical hole + countersink Optimised grade for dependable stainless-steel machining The AH6225 grade is a PVD-coated carbide developed for universal performance when machining stainless steels. Its coating improves wear resistance under the typical temperatures and adhesion tendencies of stainless materials, while the substrate preserves a sharp cutting edge that resists chipping in medium-duty operations. As a result, operators benefit from more consistent part quality and reduced tool changes, which supports higher productivity on mixed-batch and changing-condition production runs. Geometry and chip control that reduce process variations The insert’s triangular 60° geometry combined with a one-sided chipbreaker yields predictable chip formation and stable cutting forces during both external and internal turning. A 0.8 mm corner radius smooths engagement at the cut edge, helping to avoid burrs on stainless workpieces and prolonging tool life. The insert features a cylindrical hole with single-side countersink (40°–60°) and a 7° clearance, which together ensure secure clamping and repeatable seat location in ISO-compatible holders. These design choices support cleaner surface finishes and more reliable cycle times on the shop floor. System compatibility and practical application guidance Delivered as an ISO-format insert, the TCMT110308 AH6225 forms part of a system that requires matching holder geometry, tolerance class, fastening method and thickness for optimal performance. The 3.18 mm plate thickness and 11 mm inscribed circle suit a broad range of external and internal turning tasks where medium removal rates and stable cutting conditions are expected. For best results, select a holder and clamping set that correspond to the insert’s form and tolerance requirements, and choose cutting parameters that account for the material’s work-hardening tendency and thermal behaviour. The combination of the AH6225 grade and Tungaloy’s manufacturing reliability supports predictable results across typical turning operations. Contact Metav Werkzeuge for tailored recommendations on integrating the AH6225 grade into existing tool systems, or request assistance by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6951425 SKU: 6951425-Tungaloy Manufacturer item number: TUN6951425 Model series: ISO turning inserts Insert designation: TCMT110308 Core technical data Shape: triangular Inscribed circle / size: 11 mm Thickness: 3.18 mm Corner radius: 0.8 mm Free clearance angle: 7° Included angle: 60° Special features Grade/coating: AH6225, PVD-coated carbide Chipbreaker: one-sided Hole style: cylindrical hole + single-side countersink (40°–60°) Application: external and internal turning Compatibility: ISO-format, holder compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness Suited material group: stainless steels FAQ What materials is this insert suitable for? The TCMT110308 AH6225 turning insert is specified for machining stainless steels; the AH6225 grade and PVD coating are tuned to resist adhesion and wear typical for these alloys. Which chip control can be expected from this insert? The insert’s one-sided chipbreaker and triangular 60° geometry produce manageable chips under medium-duty turning conditions, supporting consistent surface finish and fewer interruptions. What clamping and holder features are required? Secure clamping uses the cylindrical hole with single-side countersink (40°–60°); compatibility depends on matching insert form, 7° clearance, tolerance class, fastening and thickness with the chosen ISO holder. Is the TCMT110308 AH6225 suitable for both external and internal turning? Yes — the TCMT110308 AH6225 Tungaloy turning insert (SKU 6951425-Tungaloy) is intended for both external and internal turning operations when paired with the appropriate holder and cutting data. How does the AH6225 grade affect tool life and finish? AH6225’s combination of a wear-resistant PVD coating and a substrate optimised for a sharp cutting edge helps maintain finish quality and extend useful tool life in variable machining environments. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110308 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide grade tuned for stainless steels, a precise 60° triangular geometry and a compact 0.8 mm nose radius for reliable medium-duty turning; order the insert directly via Metav Werkzeuge or ask our consultants for application support. TCMT 110308 AH6225 indexable turning insert by Tungaloy — 60° triangle, 0.8 mm radius A TCMT 110308 AH6225 indexable insert engineered for external and internal turning, optimised for rostfreiem Stahl with a PVD-coated carbide grade that balances a sharp cutting edge and process stability PVD-coated carbide AH6225 for rostfreiem Stahl 60° triangular form for versatile turning Single-sided chipbreaker for controlled chips Central hole with countersink for secure clamping Consistent cutting performance with a PVD-coated carbide grade The AH6225 grade combines a PVD-coated carbide substrate with a microstructure designed to maintain a sharp, yet resilient cutting edge under changing conditions. This results in longer tool life and fewer indexings during medium machining operations on rostfreiem Stahl, translating into higher productivity. The coating reduces flank wear and lowers the tendency for built-up edge formation, which improves dimensional repeatability and helps achieve a reliable surface finish even when cutting parameters vary. Secure clamping and ISO compatibility to reduce downtime The insert’s ISO-conforming TCMT geometry and central hole with a cylindrical bore plus single-sided countersink (40°–60°) enable straightforward mounting in standard external holders or boring bars. Compatibility is governed by form, relief angle and tolerance class, so selecting a matching holder and clamp set ensures firm retention and quick indexability. The combination of a standardised shape and robust fixing reduces set-up time and supports fast tool changes, which keeps production flow steady. Predictable chip control and steadier turning operations A single-sided chipbreaker and a 7° relief angle guide chip formation away from the cutting edge, producing manageable swarf and enhancing thermal stability at the cutting zone. The 0.8 mm corner radius helps resist edge chipping while delivering consistent cutting forces for medium-depth cuts. These design choices lower vibration risk and contribute to reproducible part quality, making the insert suitable for shops that prioritise stable processes over aggressive metal removal. Practical integration into the workshop toolkit The TCMT geometry, combined with a plate thickness of 3.18 mm and an 11 mm inscribed circle, fits standard ISO toolholder systems and is compatible with the usual set of shims, clamps and replacement screws. When integrating into a tooling system, pair the insert with an appropriately rated external holder or boring bar and a matching clamping kit to exploit the grade’s balance of sharpness and stability. For varied production runs, the insert’s universal AH6225 composition simplifies tool inventory by covering a wide range of rostfreiem Stahl applications. Contact Metav Werkzeuge for original Tungaloy TCMT 110308 AH6225 inserts and expert advice on holder compatibility and optimal chipbreaker selection — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical data Article number: 6903326 Manufacturer SKU: TUN6903326 SKU: 6903326-Tungaloy Model series: ISO indexable turning inserts Material: carbide Facts Size (inscribed circle): 11 mm Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 7° Geometry angle: 60° Special features Grade: AH6225 (PVD-coated carbide) Chipbreaker: single-sided Hole: central with cylindrical bore + one-sided countersink (40°–60°) Plate form: triangular Application: turning of rostfreiem Stahl Compatibility: ISO-conforming; holder determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The TCMT 110308 AH6225 insert is formulated for rostfreiem Stahl (stainless steels); the PVD-coated carbide composition helps maintain edge life and control built-up edge when machining such materials. How does the chipbreaker influence performance? The single-sided chipbreaker on the TCMT 110308 promotes predictable swarf formation and reduces built-up edge, improving stability and surface finish during medium cutting conditions. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO geometry conventions; compatibility depends on matching the holder by form, relief angle, tolerance class, fastening, size and thickness. Can the TCMT 110308 be indexed for multiple cutting edges? The triangular form and central fixing allow indexing to fresh cutting edges; secure clamping using the specified screw and clamp arrangement is required for safe rotation and repeatable positioning. What are the key dimensional specifications to check when ordering? Verify inscribed circle (11 mm), thickness (3.18 mm), corner radius (0.8 mm) and relief angle (7°) to ensure fit and desired cutting characteristics; the article number 6903326 and SKU TUN6903326 identify the exact item. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110308 AH6225 Wendeplatten - Tungaloy
Benefit from a robust combination of a PVD-coated carbide grade designed for stainless steels and a sharp, stable cutting edge that supports efficient medium-duty turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TCMT110308 AH6225 turning insert — Tungaloy A TCMT110308 AH6225 indexable turning insert for external and internal turning, engineered for reliable performance on stainless steels. PVD-coated carbide grade AH6225 Designed for stainless steel machining 60° triangular form for versatile turning 0.8 mm corner radius for robust edges Consistent cutting performance for stainless steels The combination of a PVD-coated surface and a modern cemented carbide substrate offers a balance between a sharp cutting edge and sufficient toughness for mixed cutting conditions. This results in consistent chip formation and reduces the risk of built-up edge when machining stainless steels, which improves component quality and reduces rework. The insert’s geometry supports repeatable results in medium-duty turning, making it suited to batch production and varied stainless grades. Secure clamping and ISO compatibility for flexible use As an ISO triangular insert with a 60° included angle, compatibility with a wide range of toolholders is ensured when the holder matches form, clearance, tolerance class, clamping and thickness. The presence of a hole with a cylindrical bore and single-side countersink enhances secure locating and repeatable seating, which translates into stable cutting conditions and predictable tool life under correct clamping. This helps maintain process reliability across different setups. Optimised chip control for stable surface finish The one-sided chipbreaker is designed to control chip flow for common turning tasks, promoting continuous chips and preventing entanglement in many stainless steel applications. Improved chip control reduces manual intervention and contributes to a more consistent surface finish on the workpiece. Where a different chip form is required, selecting an alternative chipbreaker geometry tailored to feed and depth of cut will provide further gains in productivity. Durable edge life through modern coating technology The AH6225 grade combines a wear-resistant PVD layer with a substrate formulated for medium cutting forces, extending edge life compared with uncoated grades in similar conditions. The coating reduces flank wear and helps preserve the cutting geometry over longer cycles, lowering tooling consumption and downtime for indexable insert changes. This makes the insert an economical choice when balanced against machining throughput and maintenance intervals. Practical selection guidance for process optimisation When specifying an insert, match the 0.8 mm corner radius to radial engagement and surface finish requirements: larger radii give greater robustness, smaller radii improve finish but require more rigid setups. For best results in difficult-to-cut stainless grades, combine the insert’s PVD-coated AH6225 chemistry with stable fixturing and appropriate cutting parameters. If assistance is needed to select the correct chipbreaker or holder combination, Metav Werkzeuge can provide tailored recommendations for the machining task. For application advice or to confirm the optimal insert and holder setup for a specific stainless steel grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will recommend the correct Tungaloy turning insert for the process. Technical data Article number: 6951459 Manufacturer SKU: TUN6951459 Our SKU: 6951459-Tungaloy Model series: ISO indexable turning inserts Material: cemented carbide Core specifications ISO designation: 110308 Insert type: TCMT110308 Angle: 60° Corner radius: 0.8 mm Clearance (relief) angle: 7° Plate thickness: 3.18 mm Plate size: 11 Features & applications Coating/grade: AH6225 (PVD-coated) Chipbreaker: one-sided Hole style: cylindrical hole + single-side countersink (40°–60°) Plate shape: triangular Application: turning (external and internal) Compatibility: ISO‑standard holder parameters determine fit FAQ Which materials is this insert primarily intended for? The TCMT110308 AH6225 insert is formulated as a universal grade for stainless steels, offering a balance of edge sharpness and toughness for medium turning operations. How does the hole and countersink affect mounting stability? The cylindrical hole with a single-side countersink (40°–60°) improves locating and clamping repeatability, so the insert seats securely in ISO-compatible holders and supports stable machining. What does the AH6225 designation indicate? AH6225 identifies the PVD-coated carbide grade and its suitability for turning stainless steels, combining wear resistance with a stable cutting edge for variable conditions. When should a different chipbreaker be chosen? If the process requires shorter chips, higher feeds or special surface requirements, selecting an alternative chipbreaker matched to feed and depth of cut will improve chip control and finish Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110308 AH6225 Wendeplatten - Tungaloy
Combining the ISO geometry with a PVD-coated carbide grade designed for stainless steels delivers consistent medium-duty turning performance and stable chip control; compatibility with standard holders and a 7° clearance angle ensures straightforward integration into existing tool systems. Order directly via Metav Werkzeuge or consult the specialists for application advice. TCMT 110308 AH6225 Turning insert (ISO) by Tungaloy — PVD-coated carbide, 60° triangle A TCMT110308 AH6225 indexable turning insert intended for external and internal turning, optimised for stainless steels and medium machining conditions ISO TCMT 110308 geometry PVD-coated carbide substrate Suited for stainless steels machining Triangular insert with 60° included angle Reliable performance for stainless-steel turning The PVD-coated carbide grade AH6225 combines a sharp yet durable cutting edge with resistance to work-hardening typical of stainless steels. This results in a steadier cutting action and reduced tendency to built-up edge, which supports higher process stability in interrupted or variable cutting conditions. The insert’s configuration contributes to predictable tool life and a reproducible surface finish, helping to lower unplanned downtime and improve batch repeatability. ISO conformity and simple integration into existing tool systems As an ISO indexable insert in the TCMT110308 format, the part is compatible with holders and boring bars that match its form, 7° clearance and tolerance class. The system build — an ISO insert combined with a suitable external holder or boring bar, plus a matching shim/clamp set and spare screws — simplifies inventory management and shortens changeover times. Clear identification by ISO designation enables rapid selection for both external and internal turning tasks. Coating, edge geometry and what they mean in practice The PVD coating enhances wear resistance while maintaining a sharp cutting edge suitable for medium-depth cuts; this supports consistent chip formation even under fluctuating cutting parameters. The 0.8 mm corner radius balances edge strength and surface integrity, making the insert versatile between light finishing and more robust turning passes. The single-sided chipbreaker controls chips effectively in many stainless-steel grades, reducing the need for special chip-handling measures. Practical benefits for workshop productivity Using a standardised triangular insert with a 60° included angle and 3.18 mm thickness reduces the number of special tools required on the shop floor and supports quicker set-up routines. The design choices — from the central hole with cylindrical bore and single-sided countersink to the PVD-treated substrate — aim to deliver reproducible clamping and consistent performance across batches. Overall, the combination of geometry and grade supports efficient, repeatable production flows and easier stock-keeping for maintenance teams. For reliable medium-duty stainless-steel turning choose Tungaloy AH6225 inserts — contact Metav Werkzeuge for availability and expert application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903332 SKU: 6903332-Tungaloy Manufacturer SKU: TUN6903332 Brand: Tungaloy Series: ISO turning indexable inserts Material: carbide Facts Corner radius: 0.8 mm Plate thickness: 3.18 mm Size designation: 11 Included angle: 60° Clearance angle: 7° Hole/countersink: cylindrical hole + single-sided countersink (40°–60°) Special features ISO designation: TCMT110308 Grade / coating: AH6225, PVD-coated carbide Plate form: triangular Chipbreaker: single-sided Mounting: with hole for secure clamping Typical application: external and internal turning, especially stainless steels FAQ What materials is this insert suitable for? The TCMT110308 AH6225 turning insert from Tungaloy (SKU 6903332-Tungaloy) is optimised for stainless steels, offering good chip control and wear resistance in medium machining. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the TCMT110308 format follows ISO standards to ensure broad compatibility with matching external holders and boring bars. How does the PVD coating affect tool life and finish? The PVD-coated carbide substrate on the Tungaloy AH6225 grade improves wear resistance while maintaining a sharp cutting edge, which supports consistent surface finish and longer life in variable stainless-steel turning. What is the purpose of the central hole and countersink? The cylindrical hole with a single-sided countersink (40°–60°) provides secure and repeatable clamping, increasing stability under load and simplifying indexable insert replacement in standard clamping systems. Which operations is the insert designed for? This triangular, 60° indexable insert is intended for both external and internal turning operations in medium machining regimes, especially where stable chip formation and reproducible results are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110308 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH6235 toughness, precise ISO compatibility and a stable chipbreaker for reliable turning of stainless steel and mixed-production environments. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific selection. TCMT 110308 AH6235 — ISO turning indexable insert, PVD-coated carbide, Tungaloy The TCMT110308 AH6235 is an ISO triangular turning insert engineered for external and internal turning, optimised for interrupted cuts and applications with a high risk of edge breakout. PVD-coated carbide grade AH6235 for stainless steel ISO triangular geometry, 60° cutting angle, 0.8 mm radius Cylindrical hole with 40°–60° countersink for secure clamping 3.18 mm thickness with one-sided chipbreaker design Consistent performance where stainless steel is involved This PVD-coated, cemented carbide grade AH6235 combines toughness with wear resistance to address the specific demands of machining stainless steel and other tough alloys. The composition of the grade reduces the risk of edge chipping during interrupted cuts and when encountering built-up edge, delivering more consistent tool life and fewer unplanned tool changes. By selecting a 0.8 mm corner radius and a 60° geometry, the insert balances strength at the cutting edge with the ability to produce the required profile accuracy, making it suitable for medium to heavy turning tasks where process reliability is critical. Secure clamping and ISO compatibility for predictable results Produced to ISO dimensions and tolerances, the insert’s fit depends on form, clearance angle, tolerance class, fastening method, size and thickness. The combination of ISO conformity, a cylindrical hole (40°–60° countersink) and a 7° clearance angle ensures stable seating in matched holders and bar tooling, reducing micro-movement under load. The 3.18 mm thickness contributes to rigidity and vibration resistance; together these attributes deliver repeatable cutting conditions, improved surface finish and reduced scrap rates in serial production. Productivity and cost-efficiency in everyday turning The one-sided chipbreaker and grade characteristics promote controlled chip formation and evacuation, which lowers cycle interruptions and decreases machine downtime. For operations where changeover time and tool consumption determine output cost, the AH6235 grade offers an economical solution by extending effective edge life while maintaining surface quality. The insert is particularly suitable for shops that require dependable performance across stainless steel workpieces and mixed-material batches, supporting faster throughput and steadier process windows. For application advice, holder compatibility checks or to purchase the TCMT 110308 AH6235 from Tungaloy, contact Metav Werkzeuge for tailored support and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903500 Manufacturer SKU: TUN6903500 SKU: 6903500-Tungaloy Model series: ISO turning indexable inserts Application: Turning Core specifications Designation: TCMT110308 Corner radius: 0.8 mm Inscribed circle/size: 11 mm Thickness: 3.18 mm Clearance angle: 7° Cutting angle: 60° Hole style: cylindrical hole + single-sided countersink (40°–60°) Materials & features Material: carbide Coating: PVD Grade/sort: AH6235 Chipbreaker: one-sided Shape: triangular Hole: with hole FAQ What materials is this insert suitable for? The TCMT110308 AH6235 insert is designed primarily for stainless steel and other tough alloys; the AH6235 grade provides increased toughness for interrupted cuts and higher breakout risk. Is the insert compatible with standard ISO holders? Yes — the TCMT110308 follows ISO dimensions; compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness to ensure secure clamping. How does the AH6235 grade improve machining stability? AH6235 is a PVD-coated cemented carbide grade that emphasises toughness and controlled wear, reducing edge chipping and enabling steadier cutting conditions for stainless steel. Which features support chip control during turning? The one-sided chipbreaker and the insert geometry (60° cutting angle and 0.8 mm corner radius) promote predictable chip formation and evacuation under typical turning conditions. What is the manufacturer SKU and article number for ordering? The article number is 6903500 and the manufacturer SKU is TUN6903500 for the TCMT110308 AH6235 Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110308 AH6235 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH6235 grade for robust performance in interrupted cuts and applications with elevated chipping risk, combined with the 60° triangular geometry and a 0.8 mm corner radius for predictable turning results; order via Metav Werkzeuge or contact the consultants for tailored recommendations. TCMT110308 AH6235 Tungaloy indexable insert — ISO turning insert for external and internal turning, 60° triangle, 0.8 mm radius A TCMT110308 AH6235 indexable turning insert optimised for general turning tasks, particularly for rostfreier Stahl and interrupted cutting where a tougher grade and a single-sided chipbreaker improve process reliability. PVD-coated carbide grade AH6235 Optimised for rostfreier Stahl and interrupted cuts 60° triangular geometry for positive cutting 0.8 mm corner radius for consistent edge strength Robust grade for challenging materials and interrupted cuts The PVD-coated AH6235 grade is formulated as a tougher carbide variant to resist chipping and maintain edge integrity under unstable cut conditions. In practical terms, this means longer usable life when working with rostfreier Stahl or in operations with frequent engagement and disengagement of the cutting edge. The coating reduces wear rates at elevated temperatures, so the insert sustains cutting performance and supports stable cycle times in production environments. Selecting the correct chipbreaker and matching the insert to a suitable toolholder will further improve chip control and surface quality. Geometry and clamping deliver repeatable accuracy The triangular 60° geometry with a 0.8 mm corner radius and a plate thickness of 3.18 mm provides a balance between edge strength and versatility for finishing and semi-finishing passes. The insert’s cylindrical hole with one-sided countersink (40°–60°) ensures secure seating in compatible clamping systems; compatibility depends on form, free angle, tolerance class, fastening method, size and thickness. Clear understanding of these parameters reduces setup variability and helps achieve consistent part tolerances with minimal rework. Productivity gains through predictable tool life and easy indexing Using a PVD-coated carbide insert in a production cell reduces unplanned downtime because the tougher substrate tolerates slight instability without catastrophic edge failure. The single-sided chipbreaker supports controlled chip formation for common turning operations, lowering the risk of built-up edge and improving surface finish. Where indexable inserts are used, rapid replacement and indexing keep machine utilisation high; integrating the insert into a correct system (holder, shim/clamping set and spare screws) streamlines maintenance routines and inventory planning. Practical selection advice for workshop application For external and internal turning, choose the chipbreaker and insert grade to match workpiece material, machining mode and machine-tool rigidity. In unstable or interrupted cuts prefer the AH6235 variant for its resistance to edge breakage; in stable finishing passes a finer radius might be considered. If unsure about holder compatibility, consult the technical data for form, free angle (7°) and size, or contact technical support for guidance. Routine checks of clamp torque and seat condition will maintain repeatable clamping and extend insert life. For dependable performance in rostfreier Stahl machining choose the Tungaloy AH6235 insert and contact Metav Werkzeuge for stock information and application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903490 Manufacturer SKU: TUN6903490 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Coating / grade: AH6235 (PVD-coated) Facts Geometry: 60° Corner radius: 0.8 mm Thickness: 3.18 mm Size: 11 Special features Triangular plate form (TCMT) Cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Designed for interrupted cuts and rostfreier Stahl FAQ What materials is this insert best suited for? The AH6235 grade is a tougher PVD-coated carbide designed for rostfreier Stahl and applications where interrupted cuts or increased breakout risk occur; the insert is therefore a strong choice for such materials. How does the insert’s geometry affect application? The 60° triangular geometry and 0.8 mm corner radius provide a compromise between strength and versatility, suitable for external and internal turning with predictable chip flow when paired with the correct chipbreaker. What determines holder compatibility for this ISO insert? Compatibility depends on form, free angle (7°), tolerance class, fastening method, size and thickness; the TCMT110308 form and the specified hole/countersink must match the chosen holder. Can this insert be indexed, and how does that benefit production? Yes, the indexable format permits rapid edge changes; indexing minimises downtime, simplifies inventory management and supports steady production throughput. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110308 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 performance, a 60° triangular geometry and a secure clamping hole design for reliable turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TCMT 110308 AH725 Tungaloy turning insert — PVD-coated carbide, 60° triangular The TCMT110308 AH725 Tungaloy insert is an ISO-standard triangular turning insert designed for external and internal turning, offering a universal, crack-resistant grade for mixed steel and stainless steels applications. PVD-coated carbide grade AH725 Universal, crack-resistant for steel and stainless steels 60° triangular insert with 0.8 mm corner radius Cylindrical hole with single-side countersink Stable performance across mixed materials The combination of the AH725 grade and a PVD surface layer provides a balance between toughness and wear resistance that supports processing of both steel and stainless steels. As a universal, outburst-resistant grade, AH725 reduces the need for frequent insert changes when batches vary, which improves machine uptime. The PVD coating (Physical Vapour Deposition) enhances resistance to adhesion and thermal wear; this results in more predictable tool life and steadier cutting forces during interrupted cuts or variable feeds. Geometry engineered for consistent surface quality A 60° triangular cutting shape paired with a 0.8 mm corner radius produces a controlled cutting edge that maintains stability under radial and axial loads. The modest corner radius offers a compromise between edge strength and the ability to achieve a fine surface finish; larger radii increase edge support, while smaller radii favour sharpness. The 7° clearance angle and a plate thickness of 3.18 mm contribute to reduced rubbing and improved heat evacuation, translating into repeatable part tolerances and a reliable finish in serial production. ISO compatibility and secure mounting for fast changeover As an ISO-standard turning insert, compatibility with holders is determined by form, clearance angle, tolerance class, fastening type, size and thickness. The cylindrical hole with a single-sided countersink (40°–60°) ensures positive seating and straightforward indexing when used with the matching clamp set and screws. The system build—insert, matched external holder or boring bar, support shim and clamp—minimises set-up time and supports faster, safer tool changes on the shop floor. Process security and predictable tool life The integrated single-sided chipbreaker and the AH725 substrate are optimised for stable chip control and consistent edge behaviour, particularly useful for smaller tools or setups with high demands on process security. Selecting the correct chipbreaker and insert grade according to workpiece material and machining strategy will reduce scrap and enhance productivity. The robust carbide substrate and PVD finish combine to produce a dependable performance profile that supports controlled wear progression rather than sudden failure. For reliable AH725 PVD performance and tailored holder compatibility, order TCMT 110308 inserts from Metav Werkzeuge or request specialist guidance from our consultants at Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Manufacturer article number: 6865486 SKU: 6865486-Tungaloy Manufacturer SKU: TUN6865486 Series: ISO turning inserts Material: carbide Grade: AH725 Coating: PVD Core specifications Insert geometry: triangular Insert angle: 60° Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: 3.18 mm Inscribed circle / size: 11 mm Design & features Cylindrical hole with single-side countersink (40°–60°) Single-sided chipbreaker ISO-compatible form and tolerance class Intended application: turning (external and internal) Suitable for steel and stainless steels FAQ What materials can this insert machine effectively? The TCMT110308 AH725 Tungaloy insert is intended for machining steel and stainless steels; the universal AH725 grade provides crack resistance across varying components. How does the PVD coating benefit performance? The PVD coating on the AH725 substrate reduces adhesion and thermal wear, improving edge stability and producing more predictable tool life for the TCMT110308 insert. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; use holders designed for ISO triangular inserts to secure the TCMT110308 correctly. What is the effect of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge strength and supports consistent surface finish while balancing cutting forces and allowing controlled material removal in turning operations. Is the insert suitable for interrupted cuts or small tools? Yes; the AH725 grade is described as crack-resistant and suitable for smaller tools and applications with high demands on process security, making it well suited to interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110308 AH8015 Wendeplatten - Tungaloy
Take advantage of PVD-coated AH8015 for balanced wear resistance and edge stability, combined with a robust 0.8 mm corner radius and ISO conformity for reliable turning performance; order directly via Metav Werkzeuge or consult our technical team for fitment and application advice. TCMT 110308 AH8015 ISO turning insert — PVD-coated carbide for Turning (Tungaloy) The TCMT110308 AH8015 is an ISO‑standard triangular indexable insert designed for external and internal turning operations, offering a balanced combination of wear resistance and cutting-edge stability for heat‑resistant alloys. PVD-coated grade AH8015 Triangular ISO form, 60° included angle 0.8 mm corner radius for edge strength Cylindrical hole with 40°–60° countersink High-performance grade for heat-resistant alloys The PVD‑coated AH8015 grade provides a calculated mix of wear resistance and edge stability, making it a first choice for machining heat‑resistant alloys. The PVD coating enhances thermal resistance and reduces flank wear, which extends tool life under elevated cutting temperatures. For production environments seeking consistent tool change intervals and stable process windows, this coated carbide offers improved productivity without compromising component quality. Accurate fit and dimensional reliability for stable turning Designed to ISO dimensions, the insert’s triangular form and 60° included angle ensure predictable cutting geometry and compatibility with a broad range of holders. Key datum values such as 3.18 mm thickness and 11 mm size support repeatable clamping and positioning. The 7° clearance angle and the central cylindrical hole with single‑sided countersink (40°–60°) are optimised for secure fixation and straightforward replacement; compatibility depends on holder form, tolerance class, fastening type, size and thickness. Practical system benefits and machining outcomes The single‑sided chipbreaker and a 0.8 mm corner radius deliver a compromise between edge robustness and surface finish, suitable for both roughing and medium finishing passes in turning. Integrating the insert into a system—comprising an appropriate external holder or boring bar, shim/clamp set and replacement screws—simplifies procurement and reduces setup time. The result is a measurable increase in process stability, consistent workpiece quality and lower downtime for insert changes. For reliable productivity with Tungaloy’s PVD‑coated AH8015 grade, contact Metav Werkzeuge for application support and efficient supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951426 Manufacturer SKU: TUN6951426 SKU: 6951426-Tungaloy Model series: ISO turning inserts Grade: AH8015 Material: PVD-coated carbide Core specifications ISO designation: 110308 Size: 11 mm Thickness: 3.18 mm Included angle: 60° Clearance angle: 7° Corner radius: 0.8 mm Special features Triangular insert form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) With hole (for screw mounting) Intended application: turning (external and internal) PVD-coated carbide for heat-resistant alloys FAQ What materials is this insert suitable for? The TCMT110308 AH8015 insert is formulated for machining heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for those materials. Can this insert be used for both external and internal turning? Yes, the insert is suitable for external and internal turning when paired with a compatible external holder or boring bar and the correct clamp/fastening components. How does the corner radius affect machining results? The 0.8 mm corner radius increases edge strength and helps achieve stable cutting in roughing and medium finishing, reducing chipping risk under interrupted cuts. What determines compatibility with a toolholder? Compatibility is determined by insert form, clearance angle (7°), tolerance class, mounting method, size and thickness; ensure the holder matches these ISO parameters. Is the insert coated and what benefits does the coating provide? The insert is PVD‑coated, which improves thermal resistance and reduces wear, extending tool life under higher cutting temperatures. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110308 AH8015 Wendeplatten - Tungaloy
Benefit from the PVD-coated AH8015 grade and the 60° triangular geometry for consistent, economical turning of heat‑resistant alloys; the combination of a 0.8 mm corner radius and a sturdy hole/countersink secures repeatable clamping and secure cutting performance. Order the insert directly via Metav Werkzeuge or request compatibility advice from our consultants. TCMT110308 AH8015 turning insert — PVD-coated carbide, 60° triangle (Tungaloy) The TCMT110308 AH8015 Tungaloy insert is an ISO-standard triangular turning insert designed for external and internal turning, offering balanced wear resistance and cutting-edge stability for heat‑resistant alloys. PVD-coated AH8015 grade 60° triangular geometry 0.8 mm corner radius Cylindrical hole with countersink Consistent chip control for reliable productivity The triangular insert provides a stable cutting edge and predictable chip formation under a range of cutting conditions. Thanks to the PVD-coated carbide grade AH8015, the insert balances wear resistance and edge strength, reducing the risk of premature flank wear while maintaining cutting performance in elevated temperatures. The one-sided chipbreaker aids in forming controllable chips, which in turn reduces toolholder vibration and supports consistent surface finish on turned components. Designed for straightforward mounting and repeatable accuracy Compatibility with the toolholder is ensured by the ISO geometry and the insert’s mechanical dimensions. The insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure fastening and precise seating in the pocket. With a thickness of 3.18 mm and a size of 11 mm, the insert aligns with common ISO holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. This standardisation simplifies inventory management and shortens changeover times on the shop floor. Balanced grade for machining heat‑resistant alloys The AH8015 grade is a PVD-coated hardmetal formulation chosen as a first choice for general machining of heat‑resistant alloys. It offers an even compromise between edge stability and abrasion resistance, making it suitable for medium to demanding operations where thermal loads are elevated. The 0.8 mm corner radius provides controlled strength at the cutting edge while supporting good surface quality; selecting this radius helps to avoid edge chipping during interrupted cuts. Practical selection and operational support When selecting an insert for a turning task, consider holder rigidity, cutting parameters and the expected chip flow. The insert’s 60° geometry provides a versatile compromise between strength and accessibility for turning. For confirmation of holder fit or to discuss cutting data, contact Metav Werkzeuge for guidance — specification checks and practical recommendations help ensure the chosen grade and chipbreaker match the component material and machine dynamics. If additional technical data is required, technical drawings or cutting trials can be arranged on request; e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 for consultation. Contact Metav Werkzeuge to specify the TCMT110308 AH8015 insert, confirm holder compatibility and arrange prompt delivery or technical consultation. Technical data Article number: 6947709 Manufacturer SKU: TUN6947709 Label / product name: TCMT110308 AH8015 Tungaloy‑insert Model series: ISO turning indexable inserts Material: carbide Core specifications Corner radius: 0.8 mm Thickness: 3.18 mm Size: 11 mm Insert geometry: 60° triangle Clearance (relief) angle: 7° Hole: with cylindrical hole and one‑sided countersink (40°–60°) Features & applications PVD coating, grade AH8015 One‑sided chipbreaker Triangular insert shape Intended for external and internal turning Suited for heat‑resistant alloys Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The TCMT110308 AH8015 insert is optimised for machining heat‑resistant alloys; the PVD coating and the AH8015 grade combine wear resistance with edge stability for elevated temperatures. How is the insert secured in the holder? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) for reliable clamping; ensure the holder matches the ISO geometry, size and thickness for correct seating. What are the key geometric specifications to check for compatibility? Check the 60° triangular geometry, 3.18 mm thickness, 11 mm size, 0.8 mm corner radius and the 7° clearance angle to confirm fit and performance in the selected toolholder. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 110308 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD‑coated cemented carbide and a 0.8 mm corner radius for stable cutting of heat‑resistant alloys; the geometry and ISO compatibility support consistent process reliability. Order or request application advice via Metav Werkzeuge for swift integration into existing tool systems. TCMT110308 AH8015 Tungaloy – ISO triangular turning insert for external and internal turning, PVD‑coated carbide The TCMT110308 AH8015 is an ISO‑standard triangular turning insert intended for general turning of heat‑resistant alloys, offering a balance of wear resistance and edge stability suited to variable machining conditions. TCMT110308 triangular insert, 60° geometry PVD-coated carbide grade AH8015 0.8 mm corner radius for stable cutting Consistent cutting performance for heat‑resistant alloys The PVD‑coated cemented carbide grade AH8015 provides a tuned balance between wear resistance and edge stability, making it a strong choice for machining heat‑resistant alloys where both life and predictable tool behaviour matter. With a 0.8 mm corner radius and a 60° triangular form, the insert supports controlled engagement and improved chip flow under common turning forces, which reduces unexpected stops and contributes to steady cycle times. The coating promotes thermal resistance and helps maintain cutting edge integrity, translating into longer usable lives and fewer index changes. Easy integration into ISO tool systems and reduced setup time Designed as part of an ISO‑standard insert system, compatibility is defined by insert form, clearance angle, tolerance class, fastening and thickness. The triangular plate, 3.18 mm thickness and 11 mm size fit established holders, while the 7° clearance ensures appropriate relief for a wide range of turning operations. The insert’s hole configuration — a cylindrical hole with a single‑sided countersink (40°–60°) — simplifies fastening and repeatable clamping. These details reduce setup effort and help to maintain consistent datum and repeatability across tool changes, improving throughput in batch production. Practical selection and productivity benefits on the shop floor For everyday turning tasks — both external and internal — select the single‑sided chipbreaker and the AH8015 grade to match workpiece material and machine stability; this deliberate pairing enhances process security and surface finish. The insert’s design supports predictable chip control and reliable edge retention, which lessens downtime for regrinding or replacement and aids in meeting tolerance and finish targets. Backed by Tungaloy’s manufacturing standards, this insert is aimed at machinists and production engineers seeking a robust, adaptable solution that balances life, cost‑effectiveness and consistent results. Contact Metav Werkzeuge for application advice and current availability of the Tungaloy TCMT110308 AH8015 insert at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951461 Manufacturer SKU: TUN6951461 Metav SKU: 6951461-Tungaloy ISO designation: TCMT110308 Facts Size: 11 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 60° Grade: AH8015 Special features PVD‑coated cemented carbide AH8015 Triangular 60° plate form With hole: cylindrical hole + single‑sided countersink (40°–60°) One‑sided chipbreaker For turning (external and internal) Compatible with ISO holders by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The TCMT110308 AH8015 insert is specified as a first choice for general machining of heat‑resistant alloys, offering a balance of wear resistance and edge stability for these materials. Can the plate be used for both external and internal turning? Yes, the triangular TCMT110308 is suitable for both external and internal turning applications when mounted in an appropriate ISO‑compliant holder. How does the AH8015 grade affect performance? The AH8015 PVD‑coated carbide grade provides improved thermal resistance and balanced cutting edge stability, extending usable life while maintaining reliable cutting behaviour in demanding alloys. What is the significance of the 0.8 mm corner radius? A 0.8 mm corner radius offers a compromise between strength and detail: it reinforces the cutting edge for longer life while still enabling acceptable surface finish and dimensional control in typical turning operations. How is the insert clamped and secured? The insert features a cylindrical hole with a single‑sided countersink (40°–60°) for standard fastening; this configuration supports repeatable clamping and straightforward replacement in ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110308 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp cutting edge, uncoated cermet grade NS9530 and ISO compatibility for reliable finishing in turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. TCMT 110308 NS9530 Tungaloy indexable turning insert — for turning, 60° triangular TCMT 110308 NS9530 is an ISO‑standard triangular indexable insert designed for finishing operations in turning, offering a low cutting force geometry and a fine surface‑quality focus. ISO‑standard triangular insert TCMT 110308 Uncoated cermet grade NS9530 for fine finishing 0.8 mm corner radius for precise profiles Cylindrical hole with one‑side 40°–60° countersink Consistent finishing with a specialist cermet grade The insert is manufactured with an uncoated cermet cutting grade (NS9530) that delivers a sharp cutting edge and low cutting forces, making it particularly suited to continuous cuts and small depths of cut. This geometry reduces chatter and supports a consistently high surface finish on steel workpieces. For shops prioritising productivity in finishing passes, the combination of the cermet grade and the insert geometry provides an efficient, repeatable cutting action that shortens rework and improves process stability. ISO compatibility and secure clamping for dependable results As an ISO‑standard indexable insert, compatibility with the toolholder is determined by shape, relief (7°), tolerance class, fastening method, size and thickness. Correct seating on a matched external holder or boring bar, combined with the appropriate shim and clamping set plus replacement screws, ensures repeatable positioning and tool life. The standardised form simplifies tool inventory management and allows rapid changeover between inserts and holders, supporting stable production workflows. Geometry optimised for precision turning The triangular plate with a 60° included angle and a 0.8 mm corner radius is designed for precise profile work and fine detail on turned components. With a plate size of 11 mm and a plate thickness of 3.18 mm, the insert offers mechanical stability while remaining suitable for finishing passes. The cylindrical hole with one‑side countersink (40°–60°) ensures secure mounting and correct clamping alignment, reducing the risk of movement during high‑precision operations. Practical use cases and selection guidance Ideal for external and internal turning where surface quality is a priority, this insert is best paired with a single‑sided chipbreaker selected to match the workpiece material and cut conditions. For steel finishing operations with continuous chip formation, the NS9530 grade reduces cutting forces and delivers a smoother finish. When choosing feed and speed, favour conservative parameters for the initial setup and adjust to the machine, workholding and stability; the insert’s design supports fine tuning for best results. Contact Metav Werkzeuge for tailored application advice and supply of genuine Tungaloy indexable inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6951427 Manufacturer SKU: TUN6951427 Internal SKU: 6951427-Tungaloy Model series: ISO‑turning indexable insert series Article designation: TCMT110308 NS9530 Tungaloy indexable insert Brand: Tungaloy Numbers / Core technical data Corner radius: 0.8 mm Included angle: 60° Plate thickness: 3.18 mm Plate size: 11 mm Relief angle: 7° Designs / Special features Triangular plate shape (TCMT) Uncoated cermet grade NS9530 Single‑sided chipbreaker Cylindrical hole with one‑side countersink (40°–60°) ISO‑standardised insert for turning System: insert + external holder or boring bar + shim/clamp and screws Application: turning (external and internal); choose chipbreaker and grade per material FAQ What materials is this insert suitable for? The TCMT 110308 NS9530 insert is formulated as a finishing grade for steel; the uncoated cermet NS9530 performs particularly well in continuous cuts on steel workpieces. How is the insert secured in the holder? Mounting relies on the cylindrical hole with a one‑side countersink (40°–60°); correct clamping with the matching shim and screws ensures stable, repeatable seating of the TCMT 110308 NS9530 insert. Can this insert be used for roughing operations? This grade and geometry are optimised for finishing; for heavy roughing, a different insert geometry and chipbreaker suited to higher depths of cut is recommended rather than the NS9530 finishing grade. What advantages does the 0.8 mm corner radius offer? The 0.8 mm corner radius helps achieve precise profiles and improved surface finish while maintaining adequate edge strength for small feed finishing passes with minimal burr formation. Which holders are compatible with this ISO insert? Any toolholder or boring bar designed for ISO TCMT 110308 inserts and matching the form, relief angle (7°), size and thickness will be compatible; confirm tolerance class and fastening style before mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a cermet finishing grade, precise geometry and ISO compatibility for reliable steel turning results; order the insert directly via Metav Werkzeuge or consult our specialists for toolholder matching. TCMT 110308 NS9530 indexable turning insert for finishing — Tungaloy The TCMT110308 NS9530 Tungaloy insert is a triangle ISO turning insert designed for precision finishing of steel with a sharp edge and low cutting forces. Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces Triangle 60° form, 0.8 mm corner radius Cylindrical hole with single-side countersink High-precision finishing for demanding steel applications The insert offers a cermet composition with the NS9530 grade tailored for finishing operations, delivering a high surface finish and reduced built-up edge during continuous cutting. The combination of a sharp edge geometry and material properties produces low cutting forces, which helps to preserve part geometry and reduce spindle load. For manufacturers seeking reliable surface quality on turned components, this insert supports consistent finishes on steels at small depths of cut, improving yield and reducing rework. Geometry and fit that ensure process stability With a triangle form and a 60° included angle, the insert provides stable seating in compatible holders while the 0.8 mm corner radius balances edge strength with fine detail capability. The 7° relief angle and a plate thickness of 3.18 mm are ISO-typical dimensions that determine compatibility with standard external holders and boring bars. The insert’s cylindrical hole with one-sided countersink (40°–60°) secures clamping accuracy, which in turn reduces vibration and contributes to repeatable machining results across batches. Practical benefits for production and tool management Choosing this finishing grade reduces cycle interruptions through improved edge life in continuous cuts and lowers the need for secondary finishing. The ISO conformity simplifies tool management: matching is determined by insert form, relief angle, tolerance class, clamping and size. The insert’s material and geometry make it suitable for small step-downs and fine feeds, enabling predictable process windows and helping to shorten setup times when switching inserts or holders. Contact Metav Werkzeuge for tailored advice on Tungaloy finishing inserts and to check holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951463 Manufacturer SKU: TUN6951463 SKU: 6951463-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall ISO designation: TCMT110308 Facts Included angle: 60° Corner radius: 0.8 mm Relief angle: 7° Plate thickness: 3.18 mm Plate size: 11 mm Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Uncoated cermet, grade NS9530 Finishing grade for steel with sharp cutting edge Single-side chipbreaker Triangle insert form Compatibility determined by form, relief, tolerance, clamping, size and thickness FAQ What materials is this insert intended for? The TCMT110308 NS9530 insert is a cermet finishing grade specifically intended for machining steel, optimised for continuous cuts and small depths of cut. How does the insert’s geometry affect performance? The triangle 60° form and 0.8 mm radius give a balance of edge strength and fine finishing capability; the 7° relief angle and precise hole/counterbore ensure stable clamping and reduced vibration. Is this insert compatible with standard ISO holders? Yes — the insert follows ISO geometry conventions; compatibility with external holders depends on matching insert form, relief angle, tolerance class, clamping method, size and thickness. What cutting conditions suit this grade best? The NS9530 cermet grade performs best in finishing passes on steel with lower feed and shallow depth of cut, where low cutting forces and high surface finish are required. Can the insert be used for interrupted cuts? This finishing grade is optimised for continuous cutting; for heavily interrupted cuts a different grade or a more robust edge form is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110308 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of precise finishing, low cutting forces and consistent tool life provided by the TCMT110308 NS9530 cermet insert; order the insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT 110308 NS9530 Tungaloy turning insert — uncoated cermet, 0.8 mm corner radius The TCMT110308 NS9530 is an ISO-standard triangular turning insert designed for finishing steel components with continuous cuts. ISO TCMT 110308 triangular format Uncoated cermet grade NS9530 for fine finishing Sharp cutting edge for low cutting forces 0.8 mm corner radius and 7° clearance angle High-quality finishing with measurable productivity gains The insert delivers a sharp cutting edge and a substrate optimised for low cutting forces, making it particularly suitable for finishing operations on steel. Because the grade is an uncoated cermet, the cutting edge maintains stability during continuous cuts, which reduces vibration and improves the achievable surface quality. The ISO-standard geometry ensures repeatable seating and clamping, so process control is simplified and changeovers are faster. Performance benefits are therefore not only technical but also operational, with potential reductions in machining time per part where fine feeds and small depths of cut are applied. Compatibility, mounting and handling explained for workshop use Designed to the ISO TCMT form, the insert is compatible with holders that match the form, clearance angle, tolerance class, fastening method, size and thickness. The insert is supplied with a cylindrical centre hole and one-sided countersink (40°–60°) to suit standard clamping screws and locating pins; correct matching of the holder avoids runout and secures consistent results. For clamping, a suitable triangular external holder or boring bar with the correct seat is required. The indexable design enables quick rotation to a fresh cutting edge, keeping downtime to a minimum and supporting lean production workflows. Materials, recommended use and technical advantages The cutting material is an uncoated cermet in grade NS9530, optimised for low cutting forces and excellent surface finish on steel; continuous cutting and small depths of cut are the typical application scenario. The insert is also produced on a cemented carbide substrate, combining toughness with wear resistance. For users requiring high surface integrity and low post-processing, this configuration reduces the need for secondary finishing. The geometry and sharp edge are best applied where feed rates and chip load are controlled to avoid edge chipping. Economy, process reliability and selection guidance Choosing the right chipbreaker and grade according to workpiece material and machining stability is decisive for cost-efficiency. The single-sided chipbreaker and the NS9530 variety excel in stable finishing cuts; this leads to more consistent dimensional results and longer effective tool life under the intended operating conditions. For uncertain machine or process stability, consult the compatibility checklist for holder seating and recommended feed/speed ranges to obtain the intended balance between surface quality and productivity. Contact Metav Werkzeuge today for tailored advice on toolholder compatibility and application-specific recommendations for the TCMT110308 NS9530 insert Technical data Article number: 6945273 Manufacturer SKU: TUN6945273 SKU: 6945273-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Thickness: 3.18 mm Size (inscribed circle): 11 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 60° Special features Shape: triangular Hole style: cylindrical hole with one-sided countersink (40°–60°) Grade: NS9530 uncoated cermet Substrate: cemented carbide Chipbreaker: single-sided Application: turning ISO designation: TCMT110308 With hole FAQ What materials is this insert best suited for? The TCMT110308 NS9530 insert is optimised for steel finishing; the uncoated cermet grade NS9530 gives low cutting forces and high surface quality when used in continuous cutting. Which holder features must be matched to ensure compatibility? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these to the external holder or boring bar ensures correct seating and repeatable results. Can the insert be indexed to use multiple edges? Yes, the triangular ISO TCMT geometry allows indexing to multiple cutting edges; the centre hole and countersink are intended for secure clamping and fast edge changes. Is this insert suitable for roughing operations? The NS9530 grade and sharp edge are primarily designed for finishing and small depths of cut; for heavy roughing, a tougher, coated grade or different geometry is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110308 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade optimised for cast iron, ISO conformity and a compact triangular geometry for economic turning cycles — order the TCMT110308 T5115 Tungaloy indexable insert directly via Metav Werkzeuge or ask the consultants for compatibility guidance. TCMT110308 T5115 — TCMT indexable turning insert for turning, Tungaloy A TCMT110308 T5115 indexable turning insert designed for ISO‑standard turning operations, offering a universal grade optimised for cast iron machining and robust edge stability. ISO‑standard indexable insert CVD‑coated carbide for wear resistance Single‑sided chipbreaker for controlled chips Cylindrical hole with one‑sided countersink Consistent performance for cast iron turning The combination of a CVD‑coated carbide substrate and the T5115 grade delivers a balanced mix of wear resistance and edge robustness specifically for cast iron applications. This specification reduces flank wear and helps maintain dimensional accuracy over longer tool life, which is particularly valuable in batch or continuous turning. The geometry and coating work together to lower the cost per cutting edge while maintaining reliable surface quality on machined components. Clear compatibility for easy tool integration The insert is produced to ISO‑standard dimensions, which simplifies holder selection; compatibility is determined by form, 7° relief, tolerance class, fastening, size and thickness. The cylindrical hole with a single‑side countersink (40°–60°) ensures correct seating in most clamping systems designed for ISO triangular inserts, and the 60° included angle provides predictable orientation in the pocket. This clarity in interfaces reduces setup time and helps maintain process stability on production machines. Improved chip control and edge security A single‑sided chipbreaker tailored to the grade encourages consistent chip formation during turning, cutting down the risk of entanglement and improving swarf evacuation. The corner radius 0.8 mm supports a balance between edge strength and surface finish, making the insert suitable for a range of operational feed rates while preserving tool life. Controlled chip flow also contributes to safer machining and fewer interruptions for machine cleaning. Design and dimensions that support production efficiency The triangular geometry combined with a 3.18 mm thickness and size 11 profile provide mechanical stability in heavy or interrupted cuts, while keeping the insert economical to index and replace. The universal nature of the T5115 grade makes the insert a practical choice for workshops seeking consistent results without frequent tool changes. Overall, the specification supports productive machining cycles and predictable maintenance intervals. For reliable cast iron turning with proven edge stability, request the Tungaloy TCMT110308 T5115 through Metav Werkzeuge or consult our specialists at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6864281 Manufacturer SKU: TUN6864281 Our SKU: 6864281-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: TCMT110308 Material: carbide Grade/coating: T5115 Application: turning Facts Corner radius: 0.8 mm Relief angle: 7° Included angle: 60° Thickness: 3.18 mm Size: 11 mm Hole style: cylindrical hole + one‑sided countersink (40°–60°) Special features ISO‑standard triangular insert Single‑sided chipbreaker CVD‑coated carbide substrate Universal grade for cast iron machining Compatibility determined by form, relief, tolerance class, fastening, size and thickness With hole (cylindrical) and one‑side countersink for secure clamping FAQ Which materials is this insert intended for? The T5115 grade is a universal carbide coating optimised for machining cast iron; the insert is intended primarily for turning operations in cast iron workpieces. How is compatibility with a holder ensured? Compatibility is governed by ISO dimensions and by form, 7° relief, tolerance class, fastening, size and thickness; the TCMT110308 designation identifies the standard geometry for matching holders. What does the hole style mean for clamping? The insert features a cylindrical hole with a one‑sided countersink (40°–60°) to ensure stable seating and correct orientation in compatible clamping systems. How does the corner radius affect machining? A corner radius of 0.8 mm provides a compromise between edge strength and surface finish, suitable for moderate feeds with an emphasis on durability and consistent results. What are the advantages of the CVD coating? The CVD‑coated carbide offers enhanced wear resistance and edge stability, contributing to longer tool life and improved process reliability with this Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 110308 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade T6215 and a 0.8 mm corner radius to ensure reliable, repeatable performance when turning stainless steels; order the insert directly via Metav Werkzeuge or consult our specialists for process-specific recommendations. TCMT110308 T6215 TCMT indexable turning insert for turning by Tungaloy TCMT110308 T6215 – an ISO-format indexable insert engineered for efficient turning, particularly for rostfreier Stähle under stable to lightly interrupted cutting conditions CVD-coated carbide grade T6215 Triangular form, 3.18 mm thickness 0.8 mm corner radius for fine profiling Cylindrical hole with one-sided countersink Wear resistance that keeps production moving The combination of a CVD-coated surface and a robust carbide substrate delivers sustained tool life in serial turning applications. The T6215 grade is formulated specifically for rostfreier Stähle and provides good wear control during continuous cuts; this translates directly into fewer tool changes and higher uptime on the shop floor. The CVD-coated layer reduces built-up edge formation and improves surface finish, while the substrate maintains edge integrity under thermal and mechanical load. Geometry and clamping for dependable results A triangular plate geometry with a 0.8 mm corner radius and a 7° clearance angle provides a reliable balance between strength and profile precision. The plate’s 3.18 mm thickness and the central cylindrical hole with a one-sided countersink (40°–60°) ensure secure location and repeatable clamping in compatible holders. This construction reduces vibration sensitivity and helps maintain dimensional accuracy, which is beneficial when producing parts to tight tolerances or where surface quality is critical. Practical selection and process advantages Choosing the correct chipbreaker and grade is essential: the single-sided chipbreaker supplied with this insert is suitable for typical external and internal turning tasks on rostfreier Stähle where chip control and stable cutting are priorities. The ISO format simplifies inventory and holder compatibility — match the insert form, clearance angle, tolerance class, fixing method, size and thickness to the chosen holder to ensure correct seating and safe operation. The net result is a cost-effective cutting solution that supports consistent cycle times and predictable tool life. Contact Metav Werkzeuge for tailored machining advice on Tungaloy inserts, quote requests or to confirm holder compatibility — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903119 Manufacturer SKU: TUN6903119 SKU: 6903119-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TCMT110308 Facts Size: 11 Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 7° Included countersink: 40°–60° Included insert angle: 60° Special features Material: Hartmetall (carbide) Coating / grade: T6215, CVD-coated carbide Shape: triangular Hole: cylindrical hole with one-sided countersink Application: Turning; suitable for rostfreier Stähle under stable to lightly interrupted conditions FAQ Which materials is this insert suitable for? The TCMT110308 T6215 insert is intended for machining rostfreier Stähle; the T6215 grade provides wear resistance and edge stability for such materials. How does the 0.8 mm corner radius affect the cut? A 0.8 mm corner radius balances edge strength and profile definition, reducing the risk of fracture while allowing controlled finishing cuts. What does the insert’s hole style mean for clamping? The cylindrical hole with a one-sided countersink (40°–60°) enables reliable seating in compatible holders and ensures repeatable clamping accuracy for consistent results. Is this insert suitable for interrupted cuts? The insert is designed for stable to lightly interrupted conditions; heavy interruptions may require a different geometry or a more robust grade. How should the chipbreaker be chosen for specific turning tasks? Select a chipbreaker that matches the workpiece material and the depth of cut; the supplied single-sided chipbreaker is effective for typical tasks on rostfreier Stähle. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com