TCMT 16T304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9225 for robust wear resistance and the ISO-standard TCMT16T304 geometry for straightforward holder compatibility; these features deliver stable machining and predictable tool life. Order the insert directly via Metav Werkzeuge or consult the team for application advice and availability. TCMT 16T304 T9225 turning insert — CVD-coated carbide, 7° relief (Tungaloy) The TCMT 16T304 T9225 is an ISO-standard triangular turning insert engineered for medium-to-heavy steel turning, offering a 0.4 mm corner radius and a 7° relief angle for secure cutting performance. CVD-coated carbide grade T9225 ISO triangular insert, 16 mm size 0.4 mm corner radius, 7° relief Cylindrical hole with 40°–60° countersink Consistent performance where toughness matters The combination of a CVD-coated surface and a carbide substrate provides an optimised balance between hardness and fracture resistance, making this triangular insert especially suited to interrupted cuts and varying engagement conditions. The T9225 grade is formulated as a robust universal grade for medium-to-heavy steel turning, which means fewer unexpected edge failures and steadier productivity in demanding operations. Because the insert conforms to ISO geometry standards, matching the correct holder becomes a matter of checking form, clearance angle and tolerance class rather than guessing, which reduces setup time and simplifies tool management. Longer edge life and controlled chip formation for higher uptime A reliable grade and an integrated single-sided chipbreaker enable stable chip control and more predictable wear patterns. The CVD coating reduces abrasive wear and helps maintain the cutting edge under heat, while the substrate toughness resists chipping when conditions are variable. This results in less frequent insert changes and fewer interruptions to production. The measurable improvements in tool life translate directly into production benefits: reduced downtime, lower tooling consumption per component and improved process stability when machining steels of varying machinability. Practical mounting and dimensional clarity for easy integration Designed as a triangular insert with a 16 mm size and a plate thickness of 3.97 mm, the geometry includes a 0.4 mm corner radius and a 60° included angle, which together influence both strength and surface finish. The insert features a cylindrical hole with a single-side countersink (40°–60°), permitting secure clamping with standard ISO-compatible screws and shims. The 7° relief angle reduces rubbing on the flank face and supports better surface finish at moderate feed rates. When selecting an external holder or boring bar, compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness—this system approach ensures the insert can be integrated without compromise. Typical applications and material matching Intended primarily for turning operations, the insert performs well on steel and alloyed steels where a tougher grade is required to handle fluctuating cutting conditions or slightly interrupted cuts. The T9225 grade provides a pragmatic middle ground between wear resistance and toughness: suitable for semi-finish and roughing passes where robustness is more important than minimal cutting forces. For customers seeking a balance of performance and versatility, this insert offers a straightforward choice that reduces the need for numerous specialised grades while maintaining consistent outcomes across batches. For technical consultation, stock checks or recommendations for mounting and cutting data, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance and reliable delivery arrangements. Technical Data Article number: 6780996 SKU: 6780996-Tungaloy Manufacturer SKU: TUN6780996 Model series: ISO-Drehwendeschneidplatten Dimensions & Key figures Size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 60° Design & Features ISO designation: TCMT16T304 Material: carbide Coating/grade: T9225 (CVD-coated carbide) Hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: single-sided Plate shape: triangular Application: turning FAQ What materials is this insert best suited for? The TCMT 16T304 T9225 insert (SKU 6780996-Tungaloy) is optimised for medium-to-heavy steel turning; its CVD-coated carbide construction provides the toughness and wear resistance needed for variable engagement and interrupted cuts. What is the corner radius and how does it affect machining? The insert has a 0.4 mm corner radius, which increases edge strength and supports stable roughing and semi-finishing passes; the modest radius balances surface finish and robustness during heavier cuts. How is the insert secured in the holder? The triangular insert uses a cylindrical hole with a single-side countersink (40°–60°) for secure clamping; compatibility with a holder is determined by form, relief angle, tolerance class, fastening method, size and thickness. Can this insert be used for fine finishing operations? While the grade is designed for medium-to-heavy turning, light finishing passes are possible if cutting parameters and feed rates are adapted; for ultra-fine finishes, a smaller radius or a purpose-designed finishing grade may be preferable. Which holders are compatible with this ISO insert? Any ISO-compatible external holder or boring bar that matches the TCMT geometry—size 16, 7° relief, and triangular form—will be compatible; ensure the clamp and shim accommodate the cylindrical hole with countersink. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T9225 Wendeplatten - Tungaloy
Combining a CVD-coated carbide grade T9225 with a 60° triangular geometry and a 0.4 mm corner radius ensures robust, repeatable performance for medium to heavy steel turning; order the TCMT16T304 T9225 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT 16T304 T9225 indexable insert for turning — Tungaloy A TCMT16T304 T9225 indexable insert engineered for ISO-standard external and internal turning, offering a balanced combination of toughness and wear resistance for varying cut conditions. CVD-coated carbide for high wear resistance Universal T9225 grade for medium to heavy steel 60° triangular shape with 0.4 mm corner radius Cylindrical hole with 40°–60° countersink Dependable performance under varying cut conditions The combination of a CVD coating and a robust carbide substrate delivers consistent edge life where interrupted cuts or variable engagement occur. The T9225 grade is formulated for higher toughness than typical finishing grades, which reduces edge chipping during semi-roughing and heavier passes. This results in fewer insert changes and improved machine uptime. For manufacturers requiring steady productivity, the design reduces unexpected tool failures and supports predictable process planning. Secure clamping and geometric advantages for stable turning A 60° triangular geometry provides three cutting corners per insert, increasing economy and flexibility. The insert’s 0.4 mm corner radius smooths cutting forces and enhances component surface integrity during medium to heavy cuts, while the 7° clearance angle helps avoid rubbing on the flank face. The cylindrical hole with a single-side countersink (40°–60°) ensures precise seating in compatible holders, so clamping rigidity is maintained and vibration is reduced — an important factor for repeatable dimensions and tool life. Practical handling, compatibility and selection guidance ISO standardisation of the insert format simplifies tool procurement and holder selection: compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness. The 3.97 mm plate thickness and triangular form suit a wide range of external and internal turning holders. Given the single-sided chipbreaker, choose the chipbreaker and grade aligned with material and operation stability for optimal chip control. For shops new to the grade, trial a single geometry under representative conditions to confirm cutting parameters and tool life expectations. Request specific cutting data or order genuine Tungaloy TCMT16T304 T9225 inserts via Metav Werkzeuge — technical advice and delivery options are available from Metav Werkzeuge; contact info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6781462 SKU: 6781462-Tungaloy Manufacturer SKU: TUN6781462 Material: carbide Grade/coating: T9225, CVD-coated Facts Insert shape: triangular (60°) Size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Special features ISO-standard indexable insert series for turning Single-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) Compatible with ISO turning holders (form, size, thickness, fastening) FAQ What materials is this insert suited for? The TCMT16T304 T9225 insert is designed primarily for steel machining and performs well in medium to heavy steel turning applications thanks to its tougher CVD-coated carbide grade. How many cutting edges are available per insert? The triangular geometry provides three usable cutting corners; rotation between corners extends tool life and reduces cost per part. What is the purpose of the 0.4 mm corner radius? A 0.4 mm corner radius moderates cutting forces and improves surface finish during heavier cuts while helping to avoid premature edge chipping in interrupted cuts. Is the insert compatible with all ISO holders? The insert follows ISO form and dimensions, but compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; check holder specifications before mounting. Does the CVD coating suit high-speed finishing? The CVD-coated T9225 grade prioritises toughness for semi-rough to heavy cuts; for high-speed finishing, consider a finer, smoother grade optimised for finish operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade (T9225), a stable triangle geometry (TCMT) and precise clamping features for reliable medium to heavy steel turning. Order the insert directly via Metav Werkzeuge or consult our specialists for optimal holder matching and chipbreaker selection. TCMT 16T304 T9225 triangular turning insert, CVD-coated carbide — Tungaloy The TCMT 16T304 T9225 is an ISO-standard triangular turning insert engineered for medium to heavy turning on steel where interrupted cuts and variable engagement demand toughness and consistent chip control. Robust CVD-coated carbide grade T9225 ISO triangle form TCMT for versatile turning 0.4 mm corner radius for stable edge Designed for medium to heavy steel turning High-performance grade for demanding steel turning The combination of a CVD-coated surface and the T9225 carbide composition yields a robust, general-purpose grade developed for medium to heavy steel turning. The coating enhances thermal stability and wear resistance while preserving toughness for slightly interrupted cuts; this results in fewer insert changes and a higher productive machining window. For shops focused on throughput, the material pairing supports consistent tool life and stable chip formation, reducing unplanned downtime and improving process economy. Geometry and clamping for repeatable accuracy The triangular ISO geometry with a 60° included angle and a 0.4 mm corner radius provides a balanced compromise between strength and edge definition. The insert thickness of 3.97 mm and the 7° relief angle ensure secure seating in standard TCMT-compatible holders, while the central hole — presented as a cylindrical bore with a single-side countersink (40°–60°) — supports positive clamping and repeatable indexability. These features reduce vibration and improve surface finish during external and internal turning operations, helping to maintain dimensional accuracy across batch runs. Process integration: chip control and system considerations Selection of the appropriate chipbreaker and matching of the insert grade to the workpiece steel are decisive for optimised cycle times. The single-sided chipbreaker design included with this insert offers reliable chip control for typical turning tasks; pairing the insert with the correct external holder, shim or clamp set and replacement screws completes the system. The insert integrates into the ISO turning system architecture and is suitable for use with standard external holders or boring bars, enabling straightforward replacement and minimal setup time while supporting consistent part quality. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts and holder compatibility; email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability Technical Data Article number: 6781096 Manufacturer SKU: TUN6781096 Dealer SKU: 6781096-Tungaloy Name: TCMT16T304 T9225 Tungaloy turning insert Material: carbide Model series: ISO turning inserts Facts Included angle: 60° Corner radius: 0.4 mm Relief angle: 7° Plate size: 16 mm Plate thickness: 3.97 mm Special features CVD-coated cutting grade T9225 Triangular plate, single-sided chipbreaker Central hole: cylindrical with one-sided countersink (40°–60°) Suitable for external and internal turning Compatible with ISO-standard TCMT holders FAQ What materials can this insert machine effectively? The TCMT16T304 T9225 insert is intended primarily for steel machining; the T9225 grade provides robustness for medium to heavy steel turning and performs well under slightly interrupted cuts. How does the T9225 grade differ from other carbide grades? T9225 is a CVD-coated carbide grade optimised for a balance of toughness and wear resistance, offering improved process reliability in changing engagement conditions compared with harder, less tough grades. Which holder features are required for correct clamping? Correct clamping depends on holder form, clearance, tolerance class, fixation and plate size; the triangular TCMT geometry and the central cylindrical hole with countersink ensure positive seating in compatible TCMT holders. Is this insert suitable for interrupted cuts and heavy engagement? Yes, the grade and chipbreaker design of this insert make it suitable for interrupted cuts and heavier engagement typical in medium to heavy steel turning. What is the full product identification for ordering? Order the TCMT16T304 T9225 Tungaloy turning insert, SKU 6781096-Tungaloy, for consistent identification and supply. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T9225 Wendeplatten - Tungaloy
Take advantage of the robust CVD‑coated carbide T9225, the 0.4 mm corner radius and ISO compatibility for reliable medium‑to‑heavy steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TCMT 16T304 T9225 – TCMT16T304 turning insert by Tungaloy, CVD‑coated carbide, 0.4 mm radius A TCMT16T304 T9225 is an ISO‑standard triangular turning insert designed for external and internal turning, offering a robust universal grade for medium to heavy steel machining. ISO triangular insert TCMT 16T304 T9225 CVD‑coated carbide for robust steel machining 0.4 mm corner radius, 7° clearance angle Cylindrical hole with single‑side countersink Consistent metal removal for medium to heavy steel The CVD‑coated carbide grade T9225 delivers a balanced combination of toughness and wear resistance, optimised for medium to heavy steel operations where varying engagement or light interruptions occur. As an ISO triangular insert, the geometry provides a reliable 60° included angle, offering stable cutting forces and predictable tool life. The 0.4 mm corner radius helps maintain edge strength while allowing acceptable surface finish; the CVD coating reduces flank wear and enhances thermal resistance, which translates into longer tool cycles and fewer interruptions in production. This technical stability supports higher productivity with reproducible results. Fast integration and secure clamping for efficient shopfloor workflow Compatibility with toolholders is determined by insert form, clearance, tolerance class, fixing method, size and thickness; this ISO series fits conventional holders and boring bars when those parameters match. The insert’s cylindrical hole with a single‑side countersink (40°–60°) ensures secure seating and straightforward torque control during clamping, while the 3.97 mm plate thickness contributes to rigidity under load. The system approach — insert, matching holder or boring bar, shim/clamp set and spare screws — reduces setup complexity and enables fast, repeatable insert changes, cutting fixture downtime and supporting predictable cycle times. Reliable chip control and application guidance for operators A one‑sided chipbreaker geometry is provided to suit a broad range of steel cutting situations; selecting the correct chipformer and grade helps avoid built‑up edge and improves swarf evacuation, which supports process safety and surface quality. The insert is made from carbide and coated for durability, making it a practical choice when robustness is required rather than delicate finishing. For specific machining parameters or to match the chipbreaker with a particular steel grade and machine stability, Metav Werkzeuge can provide application recommendations and cutting data, enabling efficient setup and reduced trial runs. For application recommendations or to secure a supply of Tungaloy TCMT16T304 T9225 turning inserts, contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6781189 SKU: 6781189-Tungaloy Manufacturer SKU: TUN6781189 Model series: ISO‑turning inserts Facts Size: 16 mm Plate thickness: 3.97 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 7° Special features Shape: triangular Grade: T9225 Cutting material: carbide, CVD‑coated Hole: cylindrical + single‑side countersink (40°–60°) Chipbreaker: one‑sided Application: turning (external and internal) ISO designation: TCMT16T304 FAQ What materials is this insert best suited to machine? The TCMT16T304 T9225 is optimised for medium to heavy steel machining; the T9225 grade provides toughness for variable engagement and lightly interrupted cuts. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius increases edge strength compared with smaller radii, improving resistance to chipping while still enabling acceptable surface finish for many turning tasks. Which holders are compatible with this ISO insert? Compatibility depends on holder form, free angle, tolerance class, fixing method, size and thickness; the insert conforms to ISO dimensions for straightforward matching with compatible external holders or boring bars. What is the purpose of the cylindrical hole with a countersink? The cylindrical hole with a single‑side countersink (40°–60°) secures the insert in the pocket and allows reliable clamping torque distribution, improving seating accuracy and repeatability. Can this insert handle interrupted cuts? Yes; the CVD‑coated carbide T9225 is specified as a robust universal grade that tolerates varying engagement and light interruptions without rapid edge failure. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 16T304 T9225 Wendeplatten - Tungaloy
Combining CVD-coated carbide toughness and a 0.4 mm corner radius, this insert offers robust performance for medium-to-heavy steel turning and interrupted cuts; its ISO conformity and 60° geometry support reproducible set-ups and fast tool changes. Order the insert directly via Metav Werkzeuge or consult the application specialists for material‑matched grade selection and delivery. TCMT16T304 T9225 ISO triangular turning insert by Tungaloy — 60° geometry, CVD-coated grade TCMT16T304 T9225 is an ISO‑standard triangular indexable insert designed for external and internal turning, optimised for medium to heavy steel machining where toughness and stable chip formation are required ISO triangular insert, 60° geometry CVD-coated carbide grade T9225 0.4 mm corner radius for robust profiles Compatible with standard ISO turning holders Proven cutting performance for heavy-duty steel turning The CVD-coated carbide composition and the designated T9225 grade combine hardness and toughness to sustain cutting forces during medium-to-heavy steel machining. The insert’s 0.4 mm corner radius improves edge strength and reduces chipping risk under variable engagement, meaning longer effective tool life and fewer unplanned indexings. The ISO-conformant form ensures reproducible clamping and predictable cutting results; in practice, this leads to stable cycle times and a lower overall cost per part when compared with less specialised grades. For interrupted cuts or changing entry angles the insert provides the resilience required to maintain dimensional accuracy. System compatibility and mounting advantages for workshop planning Compatibility is defined by insert shape, 7° clearance angle, tolerance class, fastening style, size and thickness. The triangular 60° form makes the component suitable for common ISO holders, while the cylindrical hole with single‑side countersink (40°–60°) supports secure fixation with standard screws. The nominal 3.97 mm thickness gives adequate support in heavy engagement, and the triangular shape offers three usable cutting edges, improving cost efficiency per edge. When organising tooling kits, include the correct holder, shim or clamping set and spare screws to ensure immediate replacement and minimal machine downtime. Practical machining benefits and process guidance The single‑sided chipbreaker is designed to assist with chip control when turning steel at medium to high uncut chip thicknesses; smoother evacuation reduces rework and shortens cycle times. The insert’s toughness is an advantage where cuts are slightly interrupted or where part clamping causes variable cutting conditions. Selection of feeds and speeds should reflect the workpiece material and machine rigidity: higher stiffness and correct feed will exploit the grade’s wear resistance, while moderate cutting speeds extend edge life. In short, a robust insert specification simplifies process planning and helps achieve repeatable component quality. For reliable medium-to-heavy steel turning, choose the Tungaloy TCMT16T304 T9225 insert and contact Metav Werkzeuge for availability, application advice and rapid delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781025 Manufacturer SKU: TUN6781025 SKU: 6781025-Tungaloy Manufacturer: Tungaloy Core data Geometry: TCMT16T304 (ISO 16T304) Included angle: 60° Corner radius: 0.4 mm Free/clearance angle: 7° Plate thickness: 3.97 mm Plate size: 16 Design and special features Coating: CVD coating (T9225) Material: carbide Chipbreaker: single-sided Shape: triangular Hole: cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) Typical use: medium to heavy steel machining, interrupted cuts System components: insert, holder, shim/clamping set, spare screws FAQ Is this insert suitable for interrupted cuts? The TCMT16T304 T9225 insert is specified for robustness and toughness; the CVD-coated carbide grade is intended to handle slight interruptions and variable engagement common in steel turning. What holders are compatible with this triangular insert? Compatibility depends on the ISO triangular form and dimensions; the insert fits standard ISO turning holders designed for TCMT 16 sized inserts with a 60° geometry. How many cutting edges are available per insert? The triangular design provides three indexable cutting edges; correct indexing extends tool utilisation and lowers cost per edge. What machining benefits does the T9225 grade provide? T9225 offers a balanced combination of toughness and wear resistance, improving edge stability under medium-to-heavy machining of steel and aiding consistent surface quality. Does the insert have a central mounting hole and countersink? Yes, the insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure screw fixation and repeatable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T304 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade engineered for toughness and the ISO TCMT format that ensures reliable seating in standard holders; ideal for medium-to-heavy steel turning where interrupted cuts occur. Order the insert directly via Metav Werkzeuge or ask the consultants for advice on grade and chipbreaker selection. TCMT 16T304 T9225 turning insert — Tungaloy (ISO 16T304) The TCMT16T304 T9225 is an ISO indexable turning insert designed for medium-to-heavy turning operations, offering a robust CVD-coated carbide grade for variable engagement conditions. CVD-coated carbide grade T9225 Triangle ISO format TCMT 16T304 0.4 mm corner radius for sturdy cutting Cylindrical hole with single-side countersink Longer cutting life through tougher coating and grade The CVD-coated carbide in this grade delivers a balance of hardness and toughness that suits mixed and interrupted turning operations. The chosen grade, T9225, is a universal option for steel machining where changing engagement or light interruptions demand increased fracture resistance. This results in fewer insert changes, more consistent cycle times and reduced tooling costs per part. For production environments, the combination of coating and substrate translates directly into improved process reliability and predictable replacement intervals. Secure seating and repeatable positioning for accurate parts An ISO triangular format with a defined geometry guarantees secure clamping in compatible external holders or boring bars. The insert’s 7° relief angle and a thickness of 3.97 mm provide the necessary stiffness for heavier cuts, while the cylindrical hole with a single-side countersink (40°–60°) ensures correct orientation and simple fastening. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; using the correct holder, shim and clamp set maintains repeatable positioning and dimensional stability across long production runs. Effective chip control and surface quality with optimised geometry The single-sided chipbreaker reduces the risk of long, entangling chips and helps maintain a stable cutting zone, which benefits surface finish and machine uptime. Selecting the appropriate chipformer and grade for the workpiece material and machining parameters improves evacuation and lowers the likelihood of secondary operations. For turning tasks in steel, this geometry supports sustained cutting parameters and contributes to consistent results in batch production, shortening cycle times and lowering scrap rates. Contact Metav Werkzeuge today for tailored advice on selecting the right Tungaloy TCMT16T304 T9225 insert and the optimal chipbreaker for the intended steel application Technical Data Article number: 6781490 SKU: 6781490-Tungaloy Manufacturer SKU: TUN6781490 Model series: ISO-Drehwendeschneidplatten Material: carbide Core technical data Corner radius: 0.4 mm Insert size: 16 mm Relief angle: 7° Included angle: 60° Plate thickness: 3.97 mm Special features ISO triangular insert, TCMT format CVD-coated carbide, grade T9225 Single-sided chipbreaker With cylindrical hole and one-sided countersink (40°–60°) System composition: insert, matching external holder/boring bar, shim/clamp set and spare screws Intended application: turning; suitable for medium-to-heavy steel machining FAQ What materials is this insert suitable for? The TCMT16T304 Tungaloy turning insert with grade T9225 is designed primarily for medium-to-heavy steel machining and performs well under varying engagement conditions. How does the hole and countersink affect clamping? The cylindrical hole with a single-side countersink ensures reliable orientation and secure fastening in compatible holders, improving repeatability for the TCMT16T304 insert. Is this insert suitable for interrupted cuts? Yes, the T9225 grade and the CVD coating deliver added toughness, making the insert suitable for light to moderate interrupted cuts in steel turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide AH6225 grade, a 60° triangular geometry and a 0.8 mm corner radius for reliable stainless steel turning; order the insert directly via Metav Werkzeuge or consult our technical advisors for application support. TCMT 16T308 AH6225 Turning insert (ISO) — Tungaloy The TCMT16T308 AH6225 is an ISO triangular indexable insert designed for external and internal turning, offering a sharp yet stable cutting edge suited to machining stainless steels under medium cutting conditions. PVD-coated carbide AH6225 Optimised for rostfreie Stähle 60° triangular geometry for rigidity Cylindrical hole with 40°–60° countersink Consistent cutting performance for stainless steels The insert combines a PVD-coated carbide substrate with the AH6225 grade to provide a balance between edge sharpness and wear resistance. This composition reduces built-up edge formation common with corrosion-resistant alloys, delivering more consistent surface finish and fewer interruptions for tool changes. The design supports medium machining and variable conditions, which translates into higher net productivity and predictable tool life when matched with a suitable cutting strategy. Precision geometry and secure clamping for repeatable results The 60° triangular geometry and 0.8 mm corner radius create a stable cutting platform that resists vibration and maintains dimensional accuracy. With a plate thickness of 3.97 mm and a 7° relief angle, the insert is engineered for secure seating in ISO-compatible holders; the insert’s cylindrical hole with single-sided countersink (40°–60°) ensures consistent clamping and repeatability across tool changes. These mechanical attributes reduce set-up variability and support tight process tolerances on production lines. Practical application guidance for reliable process integration Equipped with a one-sided chipbreaker and optimised for rostfreie Stähle, the insert performs well in both external and internal turning operations when paired with a suitable holder and stable workholding. Selection of the correct chipbreaker and cutting parameters is important: match the grade and chip control to the component material and the expected stability of the set-up to unlock the insert’s full potential. For mixed-batch production or variable cutting conditions, this insert offers an economical route to consistent component quality and predictable cycle times. For stock availability, tailored cutting recommendations or to reserve TCMT16T308 AH6225 inserts, contact Metav Werkzeuge for technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6829886 Manufacturer SKU: TUN6829886 SKU: 6829886-Tungaloy Model series: ISO turning inserts Name: TCMT16T308 AH6225 Tungaloy insert Core data Geometry: 60° Corner radius: 0.8 mm Thickness: 3.97 mm Size: 16 mm Relief angle: 7° Hole: cylindrical hole with single-sided countersink 40°–60° Special features Material: carbide Coating: PVD Grade: AH6225 Application: turning; external and internal turning Compatibility: ISO triangular insert; holder compatibility determined by form, relief, tolerance class, fixing, size and thickness Chipbreaker: one-sided FAQ What materials is this insert best suited for? The TCMT16T308 AH6225 insert is specified as a universal grade for machining rostfreie Stähle (stainless steels), delivering a good balance of edge sharpness and stability under varying conditions. How does the hole and countersink affect clamping? The cylindrical hole with a single-sided countersink (40°–60°) on the TCMT16T308 promotes secure and repeatable clamping in compatible ISO holders, reducing the risk of rotation or misalignment during turning operations. Is the insert suitable for both external and internal turning? Yes, the insert’s geometry and chipbreaker make it suitable for external and internal turning applications when used with an appropriate holder and stable set-up. What advantages does the AH6225 PVD coating provide? The AH6225 PVD-coated carbide offers improved wear resistance and a sharper cutting edge compared with uncoated grades, helping to control built-up edge and maintain surface finish during stainless steel turning. How should the insert be matched to a holder? Compatibility depends on form, free-cutting angle, tolerance class, fixing method, size and thickness; select an ISO-compatible holder that matches the TCMT16T308 dimensions and clamping style for secure seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge, ISO compatibility and proven PVD-coated AH6225 grade for consistent mid-range machining of stainless steels; order directly via Metav Werkzeuge or ask the consultants for technical guidance. TCMT 16T308 AH6225 Tungaloy – ISO turning insert for external and internal turning, triangular 60° geometry The TCMT 16T308 AH6225 is an ISO-standard indexable insert designed for turning operations, offering a balanced combination of PVD-coated carbide performance and reliable chip control for stainless steel machining. ISO triangular insert, 60° geometry PVD-coated carbide AH6225 grade 0.8 mm nose radius for versatile finishes Cylindrical hole with 40°–60° countersink Precise geometry that delivers stable, repeatable turning results The triangular ISO insert geometry with a 60° included angle and a 0.8 mm nose radius provides a practical balance between profile detail and edge strength. This geometry reduces the tendency for chatter in moderate cutting conditions, which in turn supports a more consistent surface finish and predictable tool life. For shops aiming to maintain steady cycle times and dimensional repeatability, the combination of a small but sturdy nose radius and an acute insert angle enables accurate profiling and plunge cuts without sacrificing edge stability. Robust PVD-coated carbide grade tuned for stainless steel The PVD-coated carbide AH6225 offers a sharp, wear-resistant cutting edge that is optimised for machining stainless steel under varying conditions. The coating enhances thermal stability and reduces built-up edge formation, which is a common issue when turning stainless alloys. As a result, mid-range feeds and speeds can be run with confidence, lowering the frequency of index changes and contributing to overall process efficiency. The grade was selected to balance edge sharpness and toughness, helping to maintain a consistent cut over longer tool life. ISO compatibility and simple mounting for quick tool changes The insert conforms to ISO standards, so compatibility with holders is determined by form, 7° relief, tolerance class, clamping method, size and thickness. The central cylindrical hole with a single-sided countersink (40°–60°) ensures secure location in conventional pockets and stable clamping with screws or clamps. This standardisation shortens set-up times and reduces the need for bespoke tooling, enabling production lines to switch inserts rapidly while maintaining correct datum and runout characteristics. Practical benefits: chip control, stability and surface quality Equipped with a single-sided chipbreaker, the insert helps to control chip flow during both external and internal turning, improving swarf handling and reducing the risk of surface damage. The 3.97 mm thickness adds body rigidity to the insert, which supports consistent cutting conditions and dampens minor vibrations. Together with the 7° clearance and PVD coating, these features translate into improved process stability, fewer unplanned interruptions and a higher probability of achieving the required surface finish in one pass. For machining stainless steel with the reliability of Tungaloy technology, contact Metav Werkzeuge for ordering and technical advice – eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: 6829875 SKU: 6829875-Tungaloy Manufacturer SKU: TUN6829875 Model series: ISO turning inserts Facts Insert size: 16 mm Thickness: 3.97 mm Nose radius: 0.8 mm Relief angle: 7° Included angle: 60° Special features Material: carbide Coating / grade: PVD-coated AH6225 Shape: triangular Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) Typical system: ISO insert, compatible holder, clamping set and screws FAQ What materials is this insert designed for? The AH6225 grade is formulated for stainless steel machining; the TCMT 16T308 insert performs well in mid-range turning operations where a sharp, stable cutting edge is required. How does the chipbreaker affect machining performance? The single-sided chipbreaker on the insert promotes predictable chip formation and evacuation, improving swarf control and reducing the risk of surface blemishes during continuous turning. Which holders are compatible with this insert? Compatibility depends on insert form, relief angle, tolerance class, clamping type, size and thickness; the ISO designation 16T308 ensures fit with standard triangular pockets designed for that geometry. How does the PVD coating benefit tool life? The PVD-coated carbide AH6225 enhances thermal resistance and reduces adhesion of workpiece material to the edge, which helps to extend index life and maintain consistent cutting performance. Is the insert suitable for internal turning? Yes, the triangular shape and 60° geometry, together with the secure hole and countersink locating, make the insert appropriate for both external and internal turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH6235 carbide and a 0.8 mm corner radius for stable machining of stainless steels and interrupted cuts; reliable chip control and ISO compatibility contribute to uninterrupted production. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TCMT16T308 AH6235 TCMT turning insert (PVD-coated carbide, 0.8 mm) — Tungaloy The TCMT16T308 AH6235 Tungaloy turning insert is an ISO triangular insert designed for external and internal turning, optimised for stainless steels and intermittent cutting conditions. PVD-coated carbide grade AH6235 ISO TCMT 16T308 triangular insert 0.8 mm corner radius for finishing Cylindrical hole with single-sided countersink Greater process reliability and extended tool life The PVD-coated AH6235 grade offers a balanced combination of toughness and wear resistance that improves performance when machining stainless steel and mixed-material batches. The PVD-coated carbide surface reduces adhesive wear and helps maintain a stable cutting edge during interrupted cuts, which leads to fewer tool changes and more predictable cycle times. For production environments where material variability and short interruptions are common, this insert supports consistent part quality and reduced rework rates. Precise geometry for chip control and surface finish A 0.8 mm corner radius combined with a 7° relief angle produces a secure cutting geometry that favours good surface finish while limiting cutting forces. The one-sided chipbreaker design promotes controllable chip formation in turning operations, decreasing the risk of built-up edge on stainless grades and simplifying chip evacuation. These features translate into economical machining: longer insert life, lower tooling consumption and a more efficient process flow for batch and continuous operations. Simple integration and practical handling for workshop use The triangular ISO format ensures wide compatibility with standard external holders and boring bars; compatibility depends on form, relief, tolerance class, fastening method, size and thickness, so correct holder selection remains essential. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) for secure clamping and repeatable seating. Given the standardised form factor and reliable material performance, the insert is suitable for both machine-shop production and maintenance tasks where robustness and fast replacement are priorities. Contact Metav Werkzeuge for tailored cutting recommendations on Tungaloy PVD inserts and secure rapid supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6890189 Manufacturer SKU: TUN6890189 SKU: 6890189-Tungaloy Model series: ISO turning inserts Designation: TCMT16T308 Brand: Tungaloy Facts Corner radius: 0.8 mm Plate thickness: 3.97 mm Plate size: 16 mm Included angle: 60° Relief angle: 7° Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features PVD-coated carbide grade AH6235 One-sided chipbreaker Triangular insert shape (TCMT) Intended for external and internal turning Suitable for stainless steel and interrupted cuts ISO-standardised geometry for broad holder compatibility FAQ Is this insert suitable for machining stainless steel? Yes. The TCMT16T308 AH6235 insert is specified for stainless steel applications; the AH6235 grade is formulated to resist chipping and adhesion typical of these materials. Can the insert handle interrupted cuts and unstable conditions? The PVD-coated AH6235 grade and robust chip control make this insert appropriate for interrupted cuts and scenarios with elevated breakout risk. Which holder types are compatible with this insert geometry? Compatibility depends on holder form, clearance angle, tolerance class and fastening. The triangular ISO format fits standard TCMT holders when size and thickness match. What is the purpose of the cylindrical hole and countersink? The cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and repeatable seating, improving stability and repeatability in turning operations. How does the 0.8 mm corner radius influence results? A 0.8 mm radius balances edge strength and surface finish; it reduces edge chipping risk compared with smaller radii while still allowing fine finishing capability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 AH6235 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH6235 grade and the robust triangular geometry for stable, productivity-focused turning of difficult-to-machine materials; the combination of a 0.8 mm nose radius and one-sided chipbreaker reduces the risk of edge breakout and keeps cycle times short. Order the TCMT16T308 AH6235 insert directly via Metav Werkzeuge or ask the consultants for application advice. TCMT16T308 AH6235 Tungaloy indexable insert — PVD-coated carbide, 60° triangle The TCMT16T308 AH6235 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for stainless steels and interrupted cuts. PVD-coated carbide grade AH6235 Optimised for stainless steel and interrupted cuts 60° triangle with 0.8 mm nose radius Consistent chip control for steady productivity The insert’s one-sided chipbreaker and PVD-coated AH6235 carbide substrate deliver predictable chip formation under varying cutting conditions. Stable chips reduce the need for frequent machine stops and minimise tool-change frequency, which contributes to higher machine uptime and lower overall cycle costs. The combination of a 0.8 mm nose radius and the triangular geometry provides a balance between sharpness for finishing and edge strength for tougher cuts, meaning fewer rejects and more consistent parts per shift. Tailored for demanding materials and interrupted cutting Specifically developed for turning stainless steels and applications with increased chipping risk, this grade offers a tougher substrate and a coating that resists built-up edge and abrasive wear. The PVD coating enhances surface hardness and temperature resistance while the substrate toughness helps absorb shock during interrupted cuts. For shops processing components with alternating cuts or variable feeds, the insert reduces the likelihood of premature edge failure and supports repeatable surface quality. Quick changeover and reliable holder compatibility As an ISO-standard turning insert, compatibility with holders is determined by form, clearance angle, tolerance class, attachment, size and thickness; the 7° clearance angle and the triangular format simplify selection of appropriate clamping systems. The insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure mounting and rapid indexability. With a nominal size of 16 mm and a plate thickness of 3.97 mm, this insert fits common external holders and boring bars, enabling efficient inventory management and fast swaps during production. Contact Metav Werkzeuge for tailored advice on selecting the right insert geometry and grade — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TCMT16T308 AH6235 and compatible holders Technical data Article number: 6890192 Manufacturer SKU: TUN6890192 Stock SKU: 6890192-Tungaloy Label: TCMT16T308 AH6235 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Material: carbide Dimensions & geometry Insert size: 16 mm Plate thickness: 3.97 mm Nose radius: 0.8 mm Clearance angle: 7° Included angle: 60° Hole style: cylindrical hole + single-sided countersink (40°–60°) Plate shape: triangular Features & applications Coating / grade: AH6235, PVD-coated carbide Chipbreaker: one-sided Typical application: external and internal turning Suited for: stainless steels, interrupted cuts, applications with increased chipping risk System components: matching outer holder or boring bar, shim/clamp set, replacement screws ISO-standard insert — compatibility determined by form, clearance angle, tolerance class, attachment, size and thickness FAQ What materials is this insert best suited for? The TCMT16T308 AH6235 insert is formulated for stainless steels and applications prone to chipping; the AH6235 grade and PVD coating provide the toughness and wear resistance required for such materials. How does the chipbreaker affect machining performance? The one-sided chipbreaker on this insert promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of edge breakout during interrupted cuts. Which holders are compatible with this insert? Compatibility follows ISO norms: holders that match the triangular TCMT16T308 form, 7° clearance angle, 16 mm size and 3.97 mm thickness are suitable; correct clamping and tolerance class ensure secure mounting. What advantages does the PVD coating bring? The PVD coating increases surface hardness and heat resistance, which reduces built-up edge and helps maintain edge geometry under higher temperatures, extending tool life for tougher turning operations. Is the insert easy to index and replace during production? Yes — the ISO designation, central hole with countersink and standard triangular form enable quick indexing and replacement, supporting short downtime during batch changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 AH725 Wendeplatten - Tungaloy
High process reliability and broad material coverage make the TCMT16T308 AH725 a dependable choice for both external and internal turning; its PVD-coated carbide grade delivers robust edge stability and consistent chip control. Benefit from the 0.8 mm corner radius and ISO compatibility for productive, repeatable machining — order the insert directly via Metav Werkzeuge or consult our specialists for machining recommendations. TCMT16T308 AH725 indexable turning insert (ISO 16T308) by Tungaloy — PVD-coated carbide, 0.8 mm radius, for turning TCMT16T308 AH725 is an ISO-standard triangular indexable insert engineered for reliable external and internal turning across a wide range of steels and rostfreier Stahl. PVD-coated carbide AH725 for steel and rostfreier Stahl Triangle 16 mm plate with 0.8 mm corner radius 7° clearance angle for stable cutting Cylindrical hole with countersink for secure clamping Consistent performance through advanced grade and coating The AH725 grade is a PVD-coated carbide designed for universal, chip-resistant performance when machining steel and rostfreier Stahl. Because the coating improves edge stability and wear resistance, the insert maintains cutting geometry longer under mixed-material conditions, which translates into fewer interruptions for tool changes and a more predictable production flow. The single-sided chipbreaker supports consistent chip formation in typical turning tasks, reducing the risk of built-up edge and improving surface finish. These technical characteristics create a tangible efficiency advantage on batch runs and mixed-series production. Precise geometry and ISO compatibility for repeatable set-ups The insert is an ISO-design triangular plate with a nominal size of 16 mm and a 0.8 mm corner radius, a 7° clearance angle and a plate thickness of 3.97 mm. The cylindrical hole with one-sided countersink (40°–60°) affords secure clamping and repeatable seating in ISO holders. Compatibility with a given toolholder is determined by form, freiwinkel, tolerance class, clamping method, size and thickness; these parameters ensure a correct fit and stable cutting conditions. When fitted in a suitable external holder or boring bar, the geometry supports stable cutting forces and predictable tool life, contributing to consistent part quality and reduced set-up variance. Application guidance and selection for reliable machining Intended primarily for turning, the insert is suitable for both external and internal operations where a universal, robust grade is required. Select the chipbreaker and cutting grade according to workpiece material, machining strategy and machine-tool stability; the AH725 grade is particularly useful for smaller tools and operations demanding high process security. For precise tool selection, compatibility checks and optimisation of cutting data, technical data sheets and machining trials are recommended. Technical queries and requests for supplementary data can be addressed by Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for rapid assistance. Contact Metav Werkzeuge today for tailored advice on using the Tungaloy TCMT16T308 AH725 insert in your turning applications and to confirm availability Technical Data Article number: 6856720 Manufacturer item number: 6856720 Manufacturer SKU: TUN6856720 SKU: 6856720-Tungaloy Manufacturer: Tungaloy Material: carbide Model series: ISO turning indexable inserts Core technical data Corner radius: 0.8 mm Included angle: 60° Clearance (free) angle: 7° Plate thickness: 3.97 mm Plate size: 16 mm Special features Coating/grade: AH725 (PVD-coated carbide) Plate form: triangular Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) ISO designation: TCMT16T308 Application: turning (external and internal) Compatibility note: fit determined by form, freiwinkel, tolerance class, clamping, size and thickness FAQ What materials is the insert suitable for? The TCMT16T308 AH725 insert is engineered for machining various steels and rostfreier Stahl, offering good chip control and reliable edge stability in common turning applications. What are the key geometric features and how do they affect use? The insert features a 0.8 mm corner radius, 60° included angle and a 7° clearance angle; this combination supports a balance between strength and finish, favouring stable cutting and repeatable part geometry. How is the insert clamped and which holders are compatible? Clamping uses a cylindrical hole with a one-sided countersink (40°–60°); compatibility with a holder follows ISO standards and is determined by form, freiwinkel, tolerance class, clamping method, size and thickness. Is the insert coated and what benefits does the coating provide? Yes — the AH725 grade is a PVD-coated carbide; the coating improves wear resistance and edge stability, helping to extend tool life and maintain surface quality under mixed or demanding conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 AH725 Wendeplatten - Tungaloy
TCMT16T308 AH725 Wendeplatte zum Drehen – Tungaloy Die TCMT16T308 AH725 ist eine ISO-genormte, PVD-beschichtete Hartmetall-Wendeplatte für universelles Drehen von Stahl und rostfreien Stählen. Universelle AH725-Sorte, ausbruchfest PVD-beschichtetes Hartmetall für hohe Standzeit Dreieckige Form 16 mm, Eckradius 0,8 mm Zylindrisches Loch mit einseitiger Senkung 40°–60° Höhere Prozesssicherheit durch beschichteten Hartstoff Die Kombination aus PVD-beschichtetem Hartmetall und der AH725-Sorte sorgt für stabile Spanbildung und hohe Prozesssicherheit bei wechselnden Werkstoffen. Die Platte wurde für Anwendungen mit hoher Anforderung an Zuverlässigkeit entwickelt und bietet speziell bei kleineren Werkzeugen eine ausbruchfeste Schneidkante. Als Folge lassen sich Standzeiten verlängern und Rüstzyklen reduzieren, was die Effizienz in der Werkstatt steigert. ISO-Genormte Bauweise für einfache Kompatibilität und schnelle Montage Die TCMT16T308 entspricht ISO-Normen, wodurch die Kompatibilität zum Halter über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke gewährleistet wird. Mit einem Sitzwinkel von 60° und einem Freiwinkel von 7° passt die Platte in gängige Außenhalter und Bohrstangen. Der Systemaufbau umfasst ISO-Drehplatte, passenden Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben, sodass der Wechsel und die Ersatzteilbevorratung planbar und wartungsfreundlich bleiben. Präzision und Oberflächenqualität durch optimierten Spanformer Der Eckenradius 0,8 mm und der einseitige Spanbrecher ermöglichen ein ruhiges Zerspanungsverhalten und gute Oberflächengüten beim Außen- und Innendrehen. Die Plattendicke von 3,97 mm trägt zur Stabilität bei und reduziert Vibrationen in instabilen Aufspannungen. Dadurch lassen sich reproduzierbare Ergebnisse erreichen, die besonders bei Serienfertigung und variierenden Schneidbedingungen von Vorteil sind. Für welche Anwender sich die Platte eignet Diese Wendeplatte richtet sich an Fertigungsbetriebe und Lohnbearbeiter, die Stahl und rostfreie Stähle bearbeiten und dabei Wert auf Prozesssicherheit sowie lange Standzeiten legen. Durch die universelle Einsetzbarkeit der AH725-Sorte eignet sich die Platte besonders für Betriebe mit wechselnden Werkstoffen oder kompakter Werkzeugbestückung, die eine zuverlässige Performance ohne aufwändige Sortenverwaltung wünschen. Empfehlung: Für prozesssichere Drehbearbeitung die TCMT16T308 AH725 von Tungaloy über Metav Werkzeuge beziehen; bei Fragen technische Details per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 erfragen Produktmerkmale Artikelnummer: 6861003 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: TCMT16T308 AH725 Tungaloy-Wendeplatte Hersteller SKU: TUN6861003 Daten Eckenradius: 0,8 mm Plattendicke: 3,97 mm Plattengröße: 16 Winkel: 60° Freiwinkel: 7° Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall Sorte: AH725 (universelle, ausbruchfeste Sorte für Stahl und rostfreie Stähle) Plattenform: dreieckig Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig Anwendung: Drehen; Außen- und Innendrehen FAQ Für welche Werkstoffe ist die TCMT16T308 AH725 geeignet? Die TCMT16T308 AH725 Tungaloy-Wendeplatte eignet sich primär für Stahl und rostfreie Stähle; die AH725-Sorte wurde als universelle, ausbruchfeste Lösung konzipiert und deckt wechselnde Werkstoffe zuverlässig ab. Ist die Platte mit Standardhaltern kompatibel? Ja, die TCMT16T308 ist ISO-genormt; die Kompatibilität zu Außenhaltern richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke, sodass gängige Halter systemen funktionieren. Welche Eigenschaften beeinflussen die Oberflächenqualität? Der Eckenradius von 0,8 mm und der einseitige Spanbrecher tragen zu ruhigem Spanfluss und verbesserter Oberflächengüte bei, während die Plattendicke 3,97 mm Stabilität gegen Vibrationen bietet. Welche Vorteile bietet die PVD-Beschichtung? Die PVD-Beschichtung des Hartmetalls erhöht die Verschleißfestigkeit und Standzeit, verbessert die Wärmebeständigkeit und unterstützt gleichmäßige Spanbildung bei variierenden Schnittbedingungen. Welche Artikelnummer bzw. SKU hat diese Wendeplatte? Die Artikelnummer lautet 6861003, erhältlich unter der Hersteller-SKU TUN6861003 als TCMT16T308 AH725 Tungaloy-Wendeplatte. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT 16T308 AH725 Wendeplatten - Tungaloy
The combination of a PVD-coated cemented carbide grade and ISO triangular geometry ensures consistent cutting performance and reduced tool changes for mixed turning tasks. Choose this insert for reliable chip control, extended edge life and straightforward holder compatibility — order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TCMT 16T308 AH725 — ISO triangular turning insert, PVD-coated carbide — Tungaloy The TCMT16T308 AH725 is an ISO-format triangular turning insert designed for external and internal turning, optimised for applications requiring high process security and reliable edge stability. ISO triangular insert TCMT 16T308, 60° PVD-coated carbide AH725 for universal use Suitable for steel and rostfreier Stahl 0.8 mm corner radius, with hole and countersink Improved process security for mixed-material turning The AH725 grade combines a wear-resistant substrate with a uniform PVD coating, delivering stable chip formation across varying steels and rostfreier Stahl. This universality reduces the need for frequent grade changes when batches include different workpiece materials, which increases uptime and simplifies tooling logistics. The result is a measurable improvement in process reliability and a lower probability of unexpected tool failures during small-tool or high-precision operations. Geometry engineered for repeatable chip control and clamping The triangular ISO profile with a 60° included angle and a 0.8 mm corner radius offers a balance between edge strength and surface finish. The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) for secure, repeatable clamping in standard holders. A relief angle of 7° and a plate thickness of 3.97 mm contribute to consistent seat engagement and clearance, helping to avoid chatter and to maintain dimensional stability over longer runs. Compatibility checks should include form, clearance angle, tolerance class, fastening and plate thickness to guarantee correct seating. Coating and substrate that extend service intervals The combination of a hardened substrate and a PVD-coated cemented carbide surface provides a hard, chemically stable cutting edge that resists built-up edge and abrasive wear. This leads to longer edge life under interrupted cuts and variable feed conditions common in turning. For productivity-focused shops, this translates into fewer insert changes and more parts per setup, improving labour utilisation and reducing indirect production costs without compromising part quality. System-level benefits and practical handling Supplied as part of the ISO turning insert system, the item integrates with standard external holders, boring bars and the usual shim/clamp sets and replacement screws. The ISO designation simplifies procurement and storage, while the single-side chipbreaker supports predictable chip flow in both external and internal turning. Where higher process security is required, this insert supports smaller tooling setups and quick indexability, aiding both repeatable finishes and simplified tool management across batch and one-off production. Contact Metav Werkzeuge for an application review or to request tailored recommendations for the Tungaloy AH725 grade and compatible holders — Metav Werkzeuge provides technical advice and rapid delivery options. Technical data Manufacturer article number: 6856671 SKU: 6856671-Tungaloy Manufacturer SKU: TUN6856671 Manufacturer: Tungaloy Numbers / Core technical data ISO designation: 16T308 Insert size: 16 mm Plate thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 60° Designs / Special features Shape: triangular Substrate/coating: PVD-coated cemented carbide Grade: AH725 Chipbreaker: single-sided Hole: with cylindrical hole and single-side countersink (40°–60°) Application: turning (external and internal) Model series: ISO turning inserts Material: carbide FAQ What materials is the TCMT16T308 AH725 best suited for? The TCMT16T308 AH725 is formulated for machining various steels and rostfreier Stahl, offering stable chip formation and reliable edge life across mixed batches. How does the PVD coating benefit cutting performance? The PVD-coated cemented carbide on the TCMT16T308 reduces abrasive wear and helps prevent built-up edge, extending service life and maintaining surface finish under typical turning conditions. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness; the TCMT16T308 fits standard ISO triangular holders designed for 16T308 inserts. Can the insert be used for internal turning operations? Yes, the insert is suitable for both external and internal turning when installed in an appropriate boring bar or holder designed for ISO triangular inserts. What is the correct way to identify the insert when ordering replacements? Use the ISO designation TCMT16T308, the grade AH725, and the manufacturer article number 6856671 or SKU 6856671-Tungaloy to ensure an exact match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 AH725 Wendeplatten - Tungaloy
Take advantage of a proven combination of PVD‑coated AH725 carbide for fracture resistance and the ISO‑standard triangular geometry for straightforward holder compatibility to keep turning operations stable and productive. Order via Metav Werkzeuge or consult their specialists for recommended holder and clamp combinations. TCMT 16T308 AH725 Turning indexable insert – Tungaloy The TCMT16T308 AH725 is an ISO‑standard triangular turning insert designed for reliable external and internal turning in mixed‑material production environments. ISO‑standard triangular geometry PVD‑coated AH725 universal grade Suitable for steel and stainless steels Cylindrical hole with 40°–60° countersink Consistent cutting performance for mixed‑material production The combination of a PVD‑coated surface and the AH725 universal grade carbide delivers consistent tool life across varied workpiece materials. The grade is formulated for fracture resistance, which reduces unexpected insert loss on interrupted cuts or unstable setups and thereby improves overall equipment effectiveness. Using a universal cutting grade minimises tool inventory while maintaining process security for continuous production. Easy integration into existing ISO tooling systems As an ISO‑standard indexable insert, compatibility with toolholders depends on geometry, 7° relief (frewinkel), tolerance class, fastening method, size and thickness. The 60° approach angle and standard TCMT form make the insert suitable for many commercially available external holders and boring bars. The modular system—insert, matching holder, shim/clamp set and replacement screws—ensures quick reassembly and short setup times, supporting higher uptime and consistent component quality. Robust geometry and secure clamping for better part finish The triangular plate shape with 0.8 mm corner radius and 3.97 mm thickness provides a balance between edge strength and surface finish capability. The central cylindrical hole with one‑sided countersink (40°–60°) ensures precise and repeatable clamping, reducing vibration and improving dimensional stability. The integrated one‑sided chipbreaker helps control chips in turning operations, enhancing surface integrity and evacuation when machining interrupted or variable feeds. Practical recommendations for turning applications Designed primarily for external and internal turning, the insert suits both conventional and semi‑finish cuts where process reliability is essential. Select the appropriate chipbreaker and match the grade to the workpiece and clamping stiffness: the AH725 grade is particularly effective when machining a mix of steel and stainless steels or when smaller tool sizes are required. For critical parts, pair the insert with a rigid holder and appropriate feed to exploit the grade’s fracture resistance and maintain consistent component quality. For guidance on suitability, holder selection and compatible clamping parts for the Tungaloy AH725 insert, contact Metav Werkzeuge for a tailored recommendation and swift supply. Technical data Article number: 6865200 Manufacturer SKU: TUN6865200 SKU: 6865200-Tungaloy Model series: ISO turning indexable inserts Designation: TCMT16T308 Core dimensions Size: 16 mm Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Approach angle: 60° Plate form: triangular Materials & special features Material: carbide Grade/coating: AH725, PVD‑coated Hole: with hole Hole style: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: one‑sided Application: Turning Compatible components: holders, shims, clamp sets and replacement screws FAQ What materials is the TCMT16T308 AH725 suitable for? The TCMT16T308 AH725 indexable insert is specified for machining steel and stainless steels; the AH725 PVD‑coated carbide provides stable chip formation and resistance to chipping on mixed‑material production. How does the insert secure to the holder? The insert uses a central cylindrical hole with a one‑sided countersink (40°–60°) for positive clamping; this ensures repeatable seating when combined with the correct shim and clamp set for the TCMT form. Which operations are recommended for this insert? The insert is intended for both external and internal turning, where a balance of edge strength and surface finish is required; it performs well in finish and semi‑finish passes under appropriate cutting conditions. What does the 0.8 mm corner radius affect in practice? A 0.8 mm corner radius increases edge strength and improves surface finish consistency; it helps absorb cutting shocks and is suitable for moderate‑feed finishing and semi‑roughing, depending on part tolerance and rigidity. Is the AH725 grade suitable for unstable clamping setups? Yes, the AH725 grade is engineered for fracture resistance and is especially useful when tool size is small or when setup rigidity is limited, as it reduces the risk of unexpected edge failures. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 AH8015 Wendeplatten - Tungaloy
The combination of a PVD-coated AH8015 grade and a 60° triangular geometry provides a balanced mix of wear resistance and edge stability, ensuring consistent results when turning heat‑resistant alloys. The insert’s 0.8 mm corner radius and one‑sided chipbreaker support reliable chip control and surface quality; order the TCMT16T308 AH8015 Tungaloy insert directly via Metav Werkzeuge or ask the consultants for application advice. TCMT 16T308 AH8015 – ISO triangular turning insert (60°) by Tungaloy A TCMT16T308 AH8015 triangular ISO insert for turning, optimised for general machining of heat‑resistant alloys and designed for secure clamping in standard ISO holders PVD-coated AH8015 carbide for heat-resistant alloys ISO triangular 60° form, 16 mm size 0.8 mm corner radius for robust edge security One-sided chipbreaker, cylindrical hole with countersink Consistent performance for machining heat‑resistant alloys The PVD-coated carbide grade AH8015 is formulated as a first choice for general machining of heat‑resistant alloys, offering a balanced combination of wear resistance and edge strength. This balance reduces unexpected tool change frequency and supports predictable performance across production batches. For shops seeking steady output, the insert’s composition contributes to extended tool life under moderate cutting speeds while maintaining surface finish and dimensional stability. Geometry that improves process reliability and surface finish The 60° triangular shape and 0.8 mm corner radius provide a compromise between strength and accessibility for external and internal turning tasks. The 3.97 mm plate thickness increases rigidity at the cutting edge, decreasing vibration and improving form accuracy. Together, these geometric choices deliver improved chip formation and a more consistent cutting edge life, which contributes to fewer part reworks and higher first‑pass yields. ISO compatibility and secure mounting for efficient setup Manufactured to ISO dimensions, the insert is compatible with standard triangular holders when form, relief angle, tolerance class, mounting and thickness match. The insert features a cylindrical hole with single‑side countersink (40°–60°) and a relief angle of 7°, allowing simple, repeatable clamping with shims and clamping sets. The standardised format simplifies inventory management and shortens setup times across different lathes and turning stations. Coating and chip control that cut downtime The PVD layer on the carbide substrate enhances thermal stability at the cutting edge and aids in abrasion resistance during extended operations. The one‑sided chipbreaker is tailored to support controlled chip curling for many alloy grades, reducing the risk of entanglement and machine stoppages. For production environments where uptime and consistent surface quality matter, this insert provides a pragmatic balance of longevity and process security. For reliable turning of heat‑resistant alloys, choose the Tungaloy TCMT16T308 AH8015 insert — contact Metav Werkzeuge for stock information and application consultancy at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6825796 SKU: 6825796-Tungaloy Manufacturer SKU: TUN6825796 Brand: Tungaloy Designation: TCMT16T308 AH8015 Tungaloy insert Facts Plate size: 16 mm Plate thickness: 3.97 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 7° Special features Material: carbide Coating: PVD-coated AH8015 Plate form: triangular Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Typical application: turning Model series: ISO turning inserts FAQ What materials is this insert suitable for? The TCMT16T308 AH8015 insert is primarily intended for heat‑resistant alloys and general machining tasks where a balanced wear resistance and edge stability are required. Which holders are compatible with this insert? Compatibility is achieved with standard ISO triangular holders that match the insert form, thickness (3.97 mm), relief angle (7°) and clamping method; the TCMT16T308 design supports secure mounting via a cylindrical hole with countersink. What corner radius does the insert have and why does it matter? This insert has a 0.8 mm corner radius, which provides enhanced edge strength for tougher cuts while still allowing a good surface finish on external and internal profiles. How does the chipbreaker affect machining? The one-sided chipbreaker on this insert promotes controlled chip formation for many alloy types, helping to avoid chip entanglement and reducing interruptions in continuous turning operations. Is the TCMT16T308 AH8015 suitable for finishing and roughing? The combination of PVD-coated AH8015 and the insert’s geometry offers a versatile solution that can be applied to both general finishing and medium roughing, depending on cutting parameters and material stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 AH8015 Wendeplatten - Tungaloy
Combining a PVD-coated AH8015 carbide grade with a 60° triangular geometry and a 0.8 mm corner radius, this insert delivers balanced wear resistance and edge stability for productive turning of heat‑resistant alloys. Order the inserts directly via Metav Werkzeuge or consult our specialists for application‑specific recommendations. TCMT 16T308 AH8015 — Turning insert, PVD‑coated carbide by Tungaloy A TCMT 16T308 AH8015 ISO triangular turning insert designed for external and internal turning of heat‑resistant alloys in ISO‑standard tool systems PVD-coated carbide AH8015 for heat resistance ISO triangular shape with 60° included angle Cylindrical hole with 40°–60° countersink Balanced wear resistance and edge stability High‑temperature performance and coating benefits for reliable cutting The PVD‑coated AH8015 grade combines wear resistance with edge stability to suit general machining of heat‑resistant alloys. The PVD coating reduces chemical wear at elevated temperatures and helps maintain sharpness over longer tool life, which increases process stability in demanding turning operations. For shops prioritising consistent component tolerances, this balanced grade offers a pragmatic trade‑off between toughness and hardness that supports repeatable surface finish and dimensional control. Geometry and chip control that simplify setup and increase uptime The triangular ISO 60° geometry with a 0.8 mm corner radius and 7° relief provides a predictable cutting edge for external and internal turning cycles. The one‑sided chipbreaker promotes controlled chip formation when machining alloys with variable machinability, while the cylindrical hole with single‑side countersink (40°–60°) enables rigid, repeatable clamping in compatible ISO holders. Clearances and tolerances are determined by insert form, attachment method and thickness; the 3.97 mm thickness contributes to stiffness, reducing vibration in medium‑duty turning tasks. System integration and application guidance for efficient production As part of the ISO indexable insert family, the insert integrates with standard external holders, boring bars and clamping sets to form a complete turning system. Selection of the chipbreaker and the AH8015 grade should be matched to workpiece material and cutting parameters: choose the noted grade for heat‑resistant alloys where a combination of flank wear resistance and edge stability is required. Indexable inserts such as this support fast re‑indexing, minimise tool change time and help maintain throughput in batch production. For applications with different material demands, consider alternative chipformers or grades within the ISO series to optimise life and surface finish. Contact Metav Werkzeuge today for personalised machining advice on Tungaloy turning inserts and to request application recommendations — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 6825772 Manufacturer SKU: TUN6825772 Our SKU: 6825772-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 16 mm Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 60° Hole: cylindrical with single-sided countersink 40°–60° Special features PVD-coated carbide AH8015 Triangular ISO insert, one-sided chipbreaker Designed for turning of heat‑resistant alloys Compatible with ISO holders and clamping sets System components: insert, holder/boring bar, clamping set, fixing screws FAQ What materials is this insert suited for? The TCMT 16T308 AH8015 insert is primarily specified for machining heat‑resistant alloys, where the AH8015 grade balances wear resistance and edge stability for reliable performance. Can the insert be used for internal and external turning? Yes; the triangular ISO geometry and the available holders make the insert suitable for both external and internal turning operations when mounted in compatible toolholders. How does the PVD coating influence tool life? The PVD coating on the AH8015 grade reduces chemical wear at elevated temperatures and helps maintain edge integrity, often extending effective tool life under high‑temperature cutting conditions. What does the hole and countersink specification mean for clamping? The cylindrical hole with a 40°–60° single‑side countersink provides positive seating and repeatable clamping in standard ISO indexable insert holders, ensuring rigidity and consistent positioning. Is the 0.8 mm corner radius suitable for finishing operations? A 0.8 mm corner radius offers a compromise between strength and the ability to achieve good surface finish; for fine finishing you may consider a smaller radius if available and compatible with the holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, uncoated NS9530 cermet and ISO conformity for consistent finishing results and stable production. Order genuine Tungaloy inserts directly via Metav Werkzeuge or contact our consultants for tailored cutting data. TCMT TCMT16T308 16T308 NS9530 Tungaloy turning insert — uncoated cermet for finishing A TCMT16T308 NS9530 ISO turning insert engineered for precision external and internal turning, offering a sharp edge and low cutting forces for superior surface quality ISO triangular insert geometry Uncoated cermet NS9530 for fine finishing Sharp cutting edge with low cutting forces Compatible with standard ISO turning holders High-precision finishing with reduced cutting forces The indexable insert is developed as a finishing grade: the NS9530 uncoated cermet provides a sharp cutting edge that reduces friction and delivers a fine surface finish on steels during continuous cuts and small depth-of-cut operations. Lower cutting forces translate into reduced tool deflection and more predictable part tolerances, which in turn cuts rework and improves overall process efficiency. This makes the insert particularly suitable where consistent surface quality and dimensional control are critical. Clear geometry for predictable holder compatibility Designed to ISO dimensions, the triangular shape with a 60° included angle ensures compatibility with many standard holders; a correct match depends on form, clearance angle, tolerance class, clamp type, size and thickness. Key geometry details include a 0.8 mm corner radius, 7° rake angle and a plate thickness of 3.97 mm, together with a cylindrical centre hole and a single-sided countersink (40°–60°). These exact values support predictable seating and clamping in properly specified toolholders, reducing set-up time and promoting repeatable tool life. Application guidance and stable cutting performance Intended primarily for turning, the insert performs well in both external and internal operations when paired with a suitable chipbreaker and cutting data adapted to material and machine rigidity. The single-sided chipbreaker and uncoated cermet grade favour finishing passes on steel where low cutting forces and excellent surface integrity are priorities. For mixed production runs, selecting a chipbreaker and feed suited to the component stability will maintain process security and extend productive periods between insert changes. As an ISO-standard indexable cutting insert from Tungaloy, the component supports efficient workflow and consistent part quality. For tailored cutting parameters, availability or to secure original Tungaloy inserts for your production, contact Metav Werkzeuge for expert consultation by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — rapid, application-specific support is available. Technical data Article number: 6998519 Manufacturer SKU: TUN6998519 Label: TCMT16T308 NS9530 Tungaloy insert Brand: Tungaloy Series: ISO turning indexable inserts Core specifications Plate size: 16 mm Thickness: 3.97 mm Corner radius: 0.8 mm Rake angle: 7° Included angle: 60° Materials & features Cutting material: uncoated cermet NS9530 Substrate material: carbide Plate form: triangular Chipbreaker: single-sided Hole: cylindrical hole + single-sided countersink (40°–60°) Application: turning (external and internal) Compatibility: ISO turning holders (form, clearance, tolerance, clamp, size and thickness must match) FAQ What materials is this insert best suited for? The TCMT16T308 NS9530 insert is specified as a finishing grade for steel; the uncoated NS9530 cermet delivers low cutting forces and excellent surface quality when machining steels. Can this insert be used for both external and internal turning? Yes, the insert is suitable for external and internal turning operations when paired with the appropriate holder and chipbreaker for the given stability and cutting conditions. What does the 0.8 mm corner radius mean for part quality? A 0.8 mm corner radius balances a fine surface finish with reasonable edge strength; it helps reduce marks on the workpiece while maintaining adequate resistance to edge chipping in finishing passes. How does the insert’s 7° rake angle affect cutting? The 7° rake provides a favourable shear geometry for low cutting forces and smooth chip formation, which supports consistent surface integrity during continuous cuts. Is the TCMT16T308 compatible with standard ISO holders? The insert conforms to ISO turning insert dimensions, but compatibility depends on matching the holder’s form, clearance angle, tolerance class, clamp and size to the insert’s specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 T505 Wendeplatten - Tungaloy
Benefit from CVD-coated carbide in grade T505 and a 0.8 mm corner radius for reliable chip formation and efficient machining of cast iron; order the insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT 16T308 T505 turning insert — triangular ISO insert for turning by Tungaloy TCMT 16T308 T505 is an ISO‑standard triangular turning insert intended for efficient external and internal turning, optimised for machining cast iron in industrial production settings. ISO‑standard triangular insert (TCMT 16T308) CVD-coated carbide grade T505 for cast iron 0.8 mm corner radius for stable chip formation Single-sided chipbreaker with centring hole Consistent chip control and economical machining The CVD-coated T505 grade provides a balance between wear resistance and cost-efficiency, making it well suited to economical machining of cast iron. The combination of the coated carbide substrate and the single-sided chipbreaker results in predictable chip control, reducing interruption from irregular chips and helping to maintain steady cycle times. This effect translates into fewer tool changes and more productive machining periods, particularly in series production where process stability is essential. Reliable fit, easy interchange and holder compatibility Designed to ISO conventions, the triangular insert ensures straightforward interchangeability with compatible holders. The ISO standard geometry, the 7° relief angle, and the specified thickness of 3.97 mm permit secure clamping and repeatable positioning, which reduces setup time and the risk of runout. The insert’s cylindrical hole with one‑sided countersink (40°–60°) supports positive centring and safe fixation in a wide range of external holders or boring bars, streamlining inventory by allowing use of standardised tool bodies. Application guidance to maintain productivity and surface quality The 0.8 mm corner radius and the triangular shape are chosen to combine edge strength with the ability to generate the desired surface finish in turning operations. For interrupted cuts or unstable setups, select the appropriate chipbreaker and consider reduced depths of cut to preserve edge life and stability; for continuous, stable conditions, the T505 grade offers consistent wear behaviour. If material or process parameters require finer tuning, technical consultation is recommended to align chipbreaker geometry and cutting speeds with the workpiece characteristics. Discuss the T505 grade and application requirements with Metav Werkzeuge to optimise turning performance and tool life; contact via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6793675 Manufacturer SKU: TUN6793675 Seller SKU: 6793675-Tungaloy Brand: Tungaloy Model series: ISO turning inserts Numbers / Core technical data Corner radius: 0.8 mm Relief angle: 7° Thickness: 3.97 mm Insert size: 16 Included angle: 60° Designs / Special features Material: carbide Coating: CVD Grade: T505 Shape: triangular Chipbreaker: single-sided Hole style: cylindrical hole with one-sided countersink (40°–60°) Application: turning; optimised for cast iron FAQ What materials is this insert best suited for? The insert is optimised for machining cast iron; the T505 CVD-coated carbide offers a combination of wear resistance and economical performance for grey and nodular cast irons. Which dimensions and angles define the insert? The insert is the TCMT16T308 form with a 0.8 mm corner radius, 7° relief angle, 3.97 mm thickness and a 60° included angle, matching ISO turning insert specifications. How does the chipbreaker affect performance? The single-sided chipbreaker supports controllable chip flow when turning cast iron, improving chip evacuation and cutting stability under typical turning conditions. Can this insert be used for internal turning? Yes — the triangular ISO form and centring hole permit use in suitable boring bars as well as external holders, provided the holder matches the ISO geometry and clamping requirements. What should be considered for interrupted cuts or unstable setups? For interrupted cuts and less rigid setups, choose a chipbreaker and cutting parameters that favour edge strength and reduced impact; the 0.8 mm corner radius helps balance strength and finish. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 16T308 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, a 0.8 mm corner radius and ISO compatibility for reliable turning of cast iron components; order the TCMT16T308 T5115 insert directly via Metav Werkzeuge or consult our specialists for application support. TCMT 16T308 T5115 turning insert — Tungaloy, CVD-coated carbide, 60° triangular form TCMT16T308 T5115 is an ISO-standard indexable insert for general turning, optimised for cast iron machining and compatible with matching ISO holders. CVD-coated carbide universal grade Triangular 60° geometry for versatile turning 0.8 mm corner radius for robust edges Cylindrical hole with single-sided countersink Longer tool life and consistent edge performance for cast iron turning The TCMT16T308 T5115 indexable insert combines a CVD-coated carbide substrate with a universal grade tuned for cast iron, delivering an advantageous balance between wear resistance and edge strength. The T5115 coating acts as a thermal and chemical barrier, reducing abrasive and notch wear during interrupted cuts. As a result, cycle times are maintained and insert changes become less frequent, which supports higher machine utilisation and lower per-part tooling costs. The trihedral geometry contributes to predictable wear progression and consistent component quality. Precise clamping and chip control reduce setup variability Designed to ISO dimensions, the triangular insert features a cylindrical locating hole with single-sided countersink (40°–60°) that ensures secure seat and repeatable clamping in standard holders. The one-sided chipbreaker promotes stable chip formation when turning cast iron, aiding evacuation and minimising re-cutting of chips. Together, these features support repeatable setups and steady cutting forces, which benefits surface finish consistency and reduces the need for frequent adjustments during production runs. Optimised geometry for demanding external and internal turning The combination of a 60° triangular form and 0.8 mm corner radius gives the insert versatility across finishing and medium-cutting operations. A moderate corner radius improves edge robustness without compromising accessibility in tight profiles, while the standard relief angle ensures reliable rake and clearance characteristics in most ISO-compatible holders. For applications requiring rapid material removal or improved edge durability, this insert grade offers an efficient compromise between performance and tool life. Practical selection and system compatibility for workshop use The insert is supplied to ISO norms and therefore requires selection of a matching external holder or boring bar, plus the correct clamping and screw set. Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness, so choosing the corresponding holder geometry is essential for achieving the expected performance. Where process stability is critical, pairing the insert with a holder that provides rigid support and correct seat contact will maximise service life and maintain dimensional accuracy on the machined part. For application advice, sample availability or to request cutting data for Tungaloy’s T5115 grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 and quote SKU 6864787-Tungaloy Technical data Article number: 6864787 Manufacturer SKU: TUN6864787 Item SKU: 6864787-Tungaloy Model series: ISO turning indexable inserts Material: Carbide (Hartmetall) Grade/coating: T5115 (CVD-coated carbide) Core specifications Geometry: TCMT16T308 Shape: triangular, 60° Size: 16 Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Application: Turning Special features Coating: T5115 (CVD) Carbide grade: CVD-coated carbide Intended material: cast iron machining ISO compatibility: ISO-standard insert system Manufacturer item number: 6864787 Brand: Tungaloy FAQ What materials is this insert optimised for? The insert is optimised for cast iron; the T5115 CVD coating provides a balance of wear resistance and edge stability for typical grey and nodular cast irons. Which holder type is required for correct fitment? An ISO-compatible triangular insert holder with the correct seat geometry, clamping arrangement and tolerance class is required for reliable use of the TCMT16T308 insert. How does the T5115 coating benefit production runs? The T5115 coating reduces abrasive wear and helps maintain edge integrity under thermal load, extending tool life and supporting consistent cycle times in series production. Is this insert suitable for both external and internal turning? Yes — the 60° triangular geometry and 0.8 mm corner radius make the insert suitable for a range of external and internal turning tasks where clearance and edge strength are needed. What is the manufacturer SKU for ordering and reference? Reference SKU 6864787-Tungaloy or manufacturer SKU TUN6864787 when specifying the insert for procurement or tool preparation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 T515 Wendeplatten - Tungaloy
Robust CVD-coated carbide and a 0.8 mm corner radius combine to deliver economical, high-process reliability for cast-iron turning; the 60° triangular geometry and ISO compatibility simplify holder selection and spare-part management. Order the TCMT 16T308 T515 insert directly via Metav Werkzeuge or request application advice from the consultancy team. TCMT 16T308 T515 — Tungaloy indexable turning insert for turning, CVD-coated carbide The TCMT 16T308 T515 is an ISO-standard triangular indexable insert, designed for productive external and internal turning of cast iron where reliable chip control and cost-effective tool life are required. ISO-standard triangular insert, 60° geometry CVD-coated carbide grade T515 for cast iron 0.8 mm corner radius for improved surface finish Cylindrical hole with single-side countersink (40°–60°) Productive cast-iron turning with controlled chips and stable life The TCMT16T308 insert is a CVD-coated carbide solution optimised for machining cast iron: the T515 grade balances wear resistance and economy to extend tool life in continuous and interrupted cuts. The combination of a single-sided chipbreaker and a stable rake geometry promotes consistent chip control, reducing secondary operations and improving cycle time. The CVD-coated carbide layer increases thermal and abrasive resistance, which translates into fewer tool changes and a steadier process window for series production. Reduced setup complexity through ISO compatibility and secure clamping The ISO designation and standardised triangular form enable straightforward integration into existing tool inventories. Compatibility with holders depends on form, relief angle (7°), tolerance class, clamping method, size and thickness; specifying the ISO code 16T308 and the 60° included angle ensures correct mating with standard toolholders. The insert's cylindrical hole with single-side countersink (40°–60°) provides reliable clamping and repeatable seating, which helps to maintain tool alignment and repeatability across set-ups. Select the right grade and handling for dependable results Choosing the T515 grade and the appropriate chipbreaker should follow the workpiece stability and the nature of the cut: stable fixtures and continuous cuts favour higher feed and cutting speed, while interrupted cuts require conservative parameters and attention to clamping. The 0.8 mm corner radius helps to achieve improved surface finish without sacrificing edge strength, and the 3.97 mm thickness contributes to insert rigidity. For practical use, pair the insert with a matching underlay, clamp set and replacement screws as part of the tool system to preserve process reliability and reduce unplanned downtime. For application-specific recommendations or immediate availability of the Tungaloy TCMT 16T308 T515 indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6741316 Manufacturer SKU: TUN6741316 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: T515 (CVD-coated carbide) ISO designation: TCMT16T308 Facts Corner radius: 0.8 mm Included angle: 60° Relief angle: 7° Thickness: 3.97 mm Size: 16 mm Special features Single-sided chipbreaker With hole Hole style: cylindrical hole + single-side countersink (40°–60°) Typical application: Drehen (external and internal turning) Compatibility: ISO holders (form, free angle, tolerance, fastening, size and thickness determine fit) FAQ Which materials is this insert suitable for? This insert is intended primarily for machining cast iron; the T515 CVD-coated carbide grade provides wear resistance suitable for a wide range of cast-iron applications. What are the key dimensions and geometry to note? Key specifications are the 60° triangular geometry, 0.8 mm corner radius and 3.97 mm thickness; these determine the cutting profile and holder compatibility for the TCMT 16T308 T515 insert. How does the chipbreaker influence performance? The single-sided chipbreaker promotes controlled chips and consistent evacuation during turning, improving surface quality and reducing risk of built-up edge in cast-iron operations. What clamping and accessories are required? Secure clamping via the cylindrical hole and single-side countersink (40°–60°) is recommended; pairing the insert with the correct underlay, clamp set and replacement screws ensures repeatable seating and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 T6215 Wendeplatten - Tungaloy
High wear resistance, reliable chip control and ISO compatibility combine to deliver consistent performance in stainless steel turning and a predictable tool life. Choose the CVD-coated carbide grade T6215 for stable to lightly interrupted operations and ensure holder compatibility by checking form, clearance and thickness. Order the TCMT16T308 T6215 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT 16T308 T6215 ISO turning insert for rostfreier Stahl — Tungaloy The TCMT16T308 T6215 is an ISO indexable insert designed for turning applications on rostfreier Stahl, offering a CVD-coated carbide grade for enhanced wear resistance under stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Optimised for rostfreier Stahl turning Triangular 60° form with 0.8 mm radius Greater productivity through reduced wear and longer tool life The combination of a CVD-coated surface and a wear-resistant carbide substrate in grade T6215 is aimed at extending running intervals and reducing index changes. In practice, this means fewer interruptions for insert changes and a more predictable production schedule; the protective coating reduces flank wear during sustained cutting, while the substrate maintains edge integrity under intermittent loads. The result is improved process economy without compromising surface quality. Precision geometry for secure clamping and consistent finishes A triangular 60° geometry with a 0.8 mm nose radius and 7° clearance delivers both rigidity and the possibility of achieving fine surface finishes in light to medium cuts. The ISO conformity ensures straightforward interchangeability with appropriate holders; compatibility depends on form, clearance angle, tolerance class, fastening and thickness. The insert’s 3.97 mm thickness and 16 mm size provide a stable contact area with the toolholder, while the cylindrical hole with one-sided countersink (40°–60°) secures reliable clamping and repeatable positioning. Clear selection and system-level integration for smoother setup Typical operations include external and internal turning; matching the single-sided chipbreaker and grade to the workpiece and machining stability is essential for optimised chip control. The insert forms part of a system comprising the indexable plate, a suitable external holder or boring bar, a backing/clamping set and replacement screws; proper selection minimises vibration and supports consistent cutting parameters. For complex parts or tight tolerances, this approach facilitates process stability and repeatable results while keeping setup and changeover straightforward. For reliable rostfrei machining with Tungaloy’s T6215 grade, contact Metav Werkzeuge for tailored application advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6876500 SKU: 6876500-Tungaloy Manufacturer SKU: TUN6876500 Manufacturer: Tungaloy Facts Size: 16 mm Thickness: 3.97 mm Nose radius: 0.8 mm Insert angle: 60° Clearance angle: 7° Special features Material: Hartmetall Coating/type: CVD-coated carbide Grade: T6215 Plate form: triangular Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Series: ISO-Drehwendeschneidplatten Application: Turning Suitable for: rostfreier Stahl FAQ What materials is this insert intended for? The TCMT16T308 T6215 insert is specified for machining rostfreier Stahl and is engineered to balance wear resistance and edge stability in such applications. Which geometries and holder features must be matched? Compatibility requires matching form, free clearance angle (7°), tolerance class, fastening, size (16 mm) and thickness (3.97 mm) to the chosen holder for secure clamping of the indexable insert. What advantages does the T6215 grade offer? Grade T6215 combines a CVD-coated surface with a wear-resistant carbide core to extend tool life and maintain cutting-edge stability in stable to lightly interrupted turning. Can this insert be used for internal turning as well as external turning? Yes, the insert is suitable for both external and internal turning operations when paired with the correct boring bar or holder and appropriate clamping components. How does the hole and countersink design benefit clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures repeatable seating and firm clamping, which contributes to stable cutting and consistent surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 T6215 Wendeplatten - Tungaloy
Benefit from consistent turning performance through the combination of a CVD-coated carbide grade, ISO compatibility and a controlled 0.8 mm corner radius for predictable tool life and finish; these attributes support efficient machining of stainless steels under stable to lightly interrupted conditions. Order the TCMT16T308 T6215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT 16T308 T6215 Turning Insert by Tungaloy — CVD-coated carbide, R0.8 The TCMT 16T308 T6215 is an ISO-standard triangular turning insert engineered for external and internal turning, optimised for machining stainless steels with stable to slightly interrupted cuts. ISO triangular insert TCMT 16T308 CVD-coated carbide for wear resistance Designed for turning stainless steels 0.8 mm corner radius for controlled cutting Consistent compatibility for reliable tool changeovers The ISO-standard geometry ensures straightforward integration into common insert holders; ISO-standard form, relief and size mean that the insert fits accepted toolholder interfaces when form, clearance angle and tolerance class align. The insert is supplied as part of a complete system consisting of an indexable insert, suitable external holder or boring bar, and the necessary clamping pack. This system focus reduces setup time and facilitates predictable repeatability in serial production, supporting steady process throughput. Wear-resistant coating engineered for stainless machining The CVD-coated carbide grade offers high wear resistance and thermal stability, characteristics that help maintain edge integrity when machining stainless steels, which tend to work‑harden and generate heat. Chemical vapour deposition (CVD) produces a hard, adherent coating layer that resists abrasive wear; when combined with the underlying carbide substrate, it extends tool life and supports longer uninterrupted cycles, lowering tooling change frequency and contributing to improved productivity. Geometry tailored for surface finish and chip control A 0.8 mm (R0.8) corner radius balances strength at the cutting edge with the ability to achieve a fine surface finish on the workpiece; a larger radius increases edge robustness, while the chosen size keeps cutting forces manageable for common turning operations. The insert features a 7° relief angle and a thickness of 3.97 mm, together stabilising mounting and reducing vibration. The central cylindrical hole with a single-sided countersink (40°–60°) secures positive clamping and repeatable seating, while the triangular shape with a 60° included angle provides three usable cutting edges per index, improving cost efficiency per edge. Productivity advantages and application guidance With a one‑sided chipbreaker and a grade intended for stable to lightly interrupted cuts, the insert supports productive turning where consistent dimensional control and surface quality are priorities. Selection of feed, depth of cut and coolant strategy should match the grade’s strengths: moderate depths and steady feeds exploit the CVD-coated carbide’s wear resistance without provoking excessive heat. For components in stainless steel, this grade helps avoid premature edge failure and reduces rework, contributing to lower overall process cost and higher throughput. For application-specific advice or compatibility checks with a particular holder, technical consultation is available. Contact Metav Werkzeuge today for a compatibility check, technical guidance on the TCMT16T308 T6215 insert and to discuss suitable holders and clamping packs; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6876659 Manufacturer SKU: TUN6876659 SKU: 6876659-Tungaloy Name: TCMT16T308 T6215 Tungaloy insert Facts Corner radius: 0.8 mm Included angle: 60° Relief angle: 7° Thickness: 3.97 mm Size: 16 Special features Material: carbide Coating: CVD-coated carbide (T6215) Shape: triangular Hole style: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning (external and internal) Model series: ISO turning indexable inserts Suitable for: stainless steels FAQ Can this insert be used for internal boring as well as external turning? The TCMT16T308 T6215 insert is suitable for both external and internal turning operations when used with an appropriate external holder or boring bar and correct clamping pack. What advantages does the T6215 grade offer for stainless steels? The T6215 CVD-coated carbide grade provides improved wear resistance and thermal stability, reducing edge degradation when machining stainless steels under stable to lightly interrupted cutting conditions. How many cutting edges are available per insert and how is it secured? The triangular geometry provides three usable cutting edges; the insert is secured via a cylindrical hole with a single-sided countersink (40°–60°) for repeatable seating and positive clamping. Is the corner radius suitable for precision finishes? The 0.8 mm corner radius balances edge strength with surface finish capability, making it appropriate for many precision turning tasks while maintaining robust performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215 and a precise 0.8 mm corner radius for stable, productive turning of medium steels; order directly via Metav Werkzeuge or request application advice from the consultants. TCMT 16T308 T9215 TCMT turning insert for turning by Tungaloy, CVD-coated carbide A TCMT 16T308 T9215 triangular ISO indexable insert designed for external and internal turning, optimised for medium-steel machining and continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 0.8 mm corner radius for consistent profiles Triangular form with 60° included angle Cylindrical hole with 40°–60° countersink High productivity through wear-resistant grade and coating The CVD-coated carbide grade T9215 combines high wear resistance with good fracture toughness to maintain cutting performance over longer runs. This composition makes the insert especially suited to medium steels, where a balance between edge stability and tool life is decisive. The protective CVD coating reduces flank wear and supports higher metal removal rates, which helps to increase throughput without frequent index changes. The overall effect is a measurable improvement in process reliability and cost-efficiency for series production. Predictable chip behaviour and geometry for accurate turning A 0.8 mm radius at the cutting edge and a dedicated single-sided chipbreaker promote dependable chip control and surface finish during external and internal turning operations. The triangular geometry with a 60° included angle allows three usable cutting edges per insert, improving economy per indexable seat. The central fixing is a cylindrical hole with a one-sided countersink (40°–60°), ensuring secure clamping and repeatable seating in ISO-compatible holders; this combination supports dimensional accuracy and reduces the risk of unexpected edge failures. Stable system build and compatibility with ISO holders With a plate thickness of 3.97 mm and a 7° clearance angle, the insert offers mechanical stiffness that supports stable cutting, particularly in continuous to lightly interrupted cuts. Compatibility with a given holder is determined by form, clearance angle, tolerance class, clamping method, size and thickness, so the insert integrates into standard ISO turning systems when matched correctly. The component’s robust design supports consistent results across batches and reduces downtime related to insert failure. Selection guidance and recommended application scope The CVD-coated grade is the first choice for medium-steel machining where a compromise between wear resistance and edge integrity is required. Select a chipbreaker and grade that correspond to workpiece material, machining operation and setup rigidity; system compatibility and holder choice are decisive. Should application advice or clarification of holder matching be required, Metav Werkzeuge can provide technical support and help specify the appropriate insert geometry and seating to meet production targets. For tailored application advice and to procure original Tungaloy turning inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 — for prompt consultation and availability information. Technical data Article number: 6772465 Manufacturer SKU: TUN6772465 Designation: TCMT16T308 T9215 Material: Carbide (CVD-coated) Model series: ISO indexable turning inserts Core data Size: 16 Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 60° Special features Triangular plate form Single-sided chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) Grade T9215: suited to medium steels, high wear resistance and fracture resistance Suitable for continuous to slightly interrupted cuts FAQ What materials is this insert best suited for? The TCMT16T308 T9215 turning insert is optimised for medium steels; the CVD-coated T9215 grade balances wear resistance and toughness for productive steel turning. How is the insert fixed in the holder? The insert uses a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping in compatible ISO holders; correct seating depends on form, clearance angle and tolerance class. Which cutting applications benefit most from this insert? The insert is geared towards external and internal turning in continuous to slightly interrupted cuts, offering stable edge life and consistent surface finish in series production. How many cutting edges are available per insert? The triangular geometry with a 60° included angle provides three usable cutting edges per insert, improving tool economy per indexable seat. Is this an original factory item and what is the SKU? Yes — this is an original Tungaloy turning insert, listed as TCMT16T308 T9215 with SKU 6772465-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 16T308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, robust CVD-coated carbide, and ISO compatibility for stable, productive turning operations; order the insert directly via Metav Werkzeuge or consult their application specialists for setup guidance. TCMT 16T308 T9215 Tungaloy turning insert — CVD-coated carbide, triangular ISO insert for turning TCMT 16T308 T9215 is an ISO-standard triangular indexable turning insert designed for medium steel machining, optimised for continuous to mildly interrupted cuts and high productivity. ISO triangular insert TCMT 16T308 CVD-coated carbide T9215 for medium steel Single-side chipbreaker, 0.8 mm corner radius 7° relief, cylindrical hole with 40°–60° countersink Enhanced productivity through CVD-coated carbide The combination of CVD-coated carbide and the T9215 grade provides a balance of wear resistance and fracture toughness, making this insert well suited to medium steel turning where consistent performance is required. The coating reduces flank and crater wear during longer cutting cycles, which translates into fewer indexings and higher machine availability. Technical terms: CVD (chemical vapour deposition) applies a hard coating layer that improves surface durability without significantly reducing substrate toughness, allowing for reliable performance under steady cutting speeds. Secure seating and ISO compatibility for reliable clamping Designed to the ISO geometry 16T308, the insert guarantees predictable fitment and repeatable clamping when combined with a matching external holder or boring bar. The cylindrical hole with single-sided countersink (40°–60°) ensures secure screw engagement and stable seating, reducing micro-movements that can cause chatter or premature edge damage. Clear dimensional conformity (size 16, thickness 3.97 mm) simplifies tool management and minimises set-up time on production lines, supporting continuous, high-throughput machining. Controlled chip formation and surface quality The single-side chipbreaker geometry, paired with a 0.8 mm corner radius and a 7° relief angle, delivers controlled chip flow and consistent surface finish on turned parts. A smaller corner radius helps maintain dimensional accuracy on lighter cuts, while the chipformer redirects swarf for efficient evacuation in typical turning setups. For operations encountering occasional interruptions, the grade’s toughness reduces the risk of edge chipping, offering a secure compromise between tool life and component quality. Practical selection and machining guidance Selection advice: choose the T9215-coated insert for medium steels where a balance of productivity and edge stability is critical. For heavier interrupted cuts or particularly abrasive materials, consider higher-toughness grades; for higher-speed, light-cut finishing, a finer radius and optimised speeds improve surface integrity. Assembly considerations include matching holder geometry, correct clamp torque, and ensuring the seating surface is clean and free of burrs to achieve the insert’s designed performance. Contact Metav Werkzeuge for tailored application advice and to secure the Tungaloy TCMT 16T308 T9215 insert for enhanced turning productivity Technical data Article number: 6777822 Manufacturer SKU: TUN6777822 Model series: ISO turning inserts Material: carbide Application: Turning Facts Size designation: 16 Insert thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 60° Special features Coating: T9215 CVD-coated carbide Shape: triangular Hole: with cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Compatibility: ISO-standard insert — fit determined by form, relief, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The T9215 CVD-coated grade is primarily intended for medium steel machining; the insert provides a compromise of wear resistance and toughness that supports productive turning operations. How does the 0.8 mm corner radius affect machining? A 0.8 mm radius offers improved edge strength over smaller radii while maintaining dimensional control, making it suitable for general finishing and light to moderate turning cuts. Is the insert compatible with ISO-standard holders? Yes — the insert follows ISO geometry 16T308, so compatibility depends on matching holder form, relief angle, tolerance class, fastening and thickness. Can this insert handle interrupted cuts? The CVD-coated carbide and T9215 grade tolerate light to moderate interrupted cuts; for severe interruptions, a higher-toughness grade may be preferable to reduce chipping risk. What does the cylindrical hole with countersink provide? The cylindrical hole with a 40°–60° single-sided countersink ensures secure screw clamping and stable seating, which supports vibration resistance and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com