TDMN 110304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of efficient cutting performance, reliable geometry and easy integration into Tungaloy milling systems for a smooth production flow. Order the insert directly via Metav Werkzeuge or consult the specialists for application support. TDMN 110304 TH10 Tungaloy triangular indexable insert for milling – 60° form, R0.4 A triangular TDMN110304 TH10 indexable insert engineered for milling operations, optimised for non‑ferrous materials and applications requiring low cutting forces and clean surface finishes. Triangular insert for 60° milling Uncoated cemented carbide TH10 grade Low cutting forces for non‑ferrous materials 0.4 mm corner radius for fine contouring Productivity through low cutting forces and clean finishes The insert's uncoated cemented carbide specification and the TH10 grade are matched to applications where minimal cutting resistance and high surface quality matter. In practical terms, the sharp, uncoated cutting edge reduces burr formation and power demand during machining of aluminium, brass and various plastics, which translates into faster cycle times and reduced secondary finishing. Economical machining is supported by the insert's consistent edge condition, so component tolerances are maintained with fewer tool changes and predictable tool life. Geometry that ensures repeatable accuracy and secure clamping A precise 60° triangular geometry combined with a corner radius 0.4 mm and 3.18 mm thickness delivers stable contact between insert and cutter body. This geometry enables repeatable seat alignment and reduces micro‑vibrations during face, shoulder and contour milling. The requirement that insert seat, geometry and milling body match technically emphasises the system approach: correct combination of milling body, indexable insert, clamping screw and, when required, a backing pad ensures secure fixation and reproducible results across assemblies. Versatility across milling operations and tool families The insert suits a broad range of milling tasks such as face milling, shoulder milling, slotting, high‑feed strategies and contouring, depending on the assigned tool family and holder. The absence of a chipbreaker and the uncoated cutting edge favour operations where chip evacuation is managed by the toolpath and machine setup rather than the insert geometry. As part of a coordinated system, the component contributes to efficient, predictable machining on non‑ferrous components and workpieces that demand a clean surface appearance. Clear technical choices for straightforward application Key measurable attributes — size 11 mm, thickness 3.18 mm, corner radius 0.4 mm, free angle 15° and 60° included angle — make selection for specific applications straightforward. The insert is delivered without hole and without chipbreaker, so holders and clamping screws must be chosen to suit a solid triangular seat. Where uncertainty exists about compatibility or optimal cutting parameters, Metav Werkzeuge can supply detailed recommendations based on machine capabilities and workpiece material to help avoid costly trial-and-error. For tailored application advice or to order the TDMN 110304 TH10 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for specialist guidance and fast availability Technical Data Article number: 6807787 SKU (merchant): 6807787-Tungaloy Manufacturer SKU: TUN6807787 Item designation: TDMN110304 TH10 Tungaloy‑indexable insert Series: Fräswendeschneidplatten Facts ISO designation: 110304 Insert size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Included angle: 60° Free clearance angle: 15° Special features Shape: triangular Grade/coating: TH10, uncoated cemented carbide Hole style: without hole Chipbreaker: without chipbreaker Intended use: milling (face, shoulder, slot, high‑feed, contour) depending on tool family System assembly: milling body, indexable insert, clamping screw, backing pad FAQ Which materials are best machined with this insert? The TDMN110304 TH10 insert, made from uncoated cemented carbide, is optimised for non‑ferrous materials such as aluminium, brass and many plastics, where low cutting forces and a clean surface finish are priorities. For which milling operations is this insert suitable? Typical uses include face milling, shoulder milling, slotting, high‑feed strategies and contour milling; the exact operation depends on the selected milling body and tool family associated with the insert. What are the critical dimensions and geometry to consider? Key data are size 11 mm, thickness 3.18 mm, corner radius 0.4 mm, included angle 60° and free angle 15°; the insert is supplied without hole and without chipbreaker. Can this insert be used in other manufacturers' holders? Insert seat, geometry and milling body must match technically; compatibility requires checking that the host cutter accepts a triangular 60° insert of the specified thickness and seat form. Is the cutting edge coated? This model uses an uncoated TH10 cemented carbide grade to achieve sharp cutting action and reduced cutting forces in suitable materials. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TDMN 110304 UX30 Wendeplatten - Tungaloy
Take advantage of the combination of economical performance, reliable chip formation and simple tool matching for efficient milling operations. Order directly via Metav Werkzeuge or consult the team for application advice. TDMN110304 UX30 indexable milling insert — triangular 11 mm, 0.4 mm radius, Tungaloy A TDMN110304 UX30 indexable insert designed for Tungaloy milling systems, engineered for low cutting forces and consistent chip formation in face, shoulder, slot and contour milling Sharp cutting edge for low cutting forces UX30 uncoated carbide grade for chip control Triangular 11 mm insert with 0.4 mm radius 15° clearance angle for secure cutting geometry Optimised cutting for low-force milling The insert's UX30 uncoated carbide and sharp cutting edge reduce cutting forces, which directly lowers power draw and improves cycle stability during milling. This results in steadier feed rates and fewer heat peaks at the cutting zone, so the process stays productive while maintaining component quality. The combination of grade and geometry prioritises good chip formation, which simplifies chip evacuation and reduces the risk of built-up edge on challenging passes. Secure fit and repeatable clamping in Tungaloy systems The triangular 11 mm format and matching seating geometry ensure secure clamping in compatible milling bodies; the 0.4 mm corner radius and 15° clearance angle provide a predictable contact pattern between insert and cutter body. Because the insert, insert seat and cutter body must be technically matched, this design yields repeatable positioning and vibration resistance. The reliable seating reduces unexpected tool changes and supports consistent workpiece tolerances in series production. Greater process reliability and surface quality A small corner radius delivers a balance between edge strength and surface finish: the 0.4 mm radius offers robustness on entry and exit, while allowing good surface appearance on shoulders and faces. With no integrated chipbreaker specified, stable chip formation from the grade is essential; when combined with appropriate feeds, the result is fewer interruptions and longer productive periods between indexings. The insert's construction supports predictable tool life and helps maintain a constant component finish across batches. Versatile for common milling tasks with clear application limits Intended for a range of milling operations — face, shoulder, slot, high-feed and contouring depending on the associated tool family — the insert performs best where low cutting forces and controlled chips are required. It is an indexable cutter component and must be used in matching Tungaloy milling bodies with the correct clamping screw and shim arrangement. For precise cutting data and process setup, consult technical documentation or speak with application specialists to align speeds, feeds and depth of cut with workpiece material and machine capability. For robust low-force milling with the Tungaloy UX30 grade, contact Metav Werkzeuge for tailored application advice and prompt supply options Technical Data Article number: 6807789 Manufacturer SKU: TUN6807789 Internal SKU: 6807789-Tungaloy Model series: Indexable milling inserts Facts Insert designation: TDMN110304 ISO code: 110304 Grade: UX30 Insert size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 15° Cutting edge angle: 60° Special features Material: uncoated carbide Insert shape: triangular Hole: without hole Chipbreaker: without Typical applications: face, shoulder, slot, high-feed and contour milling Must match Tungaloy milling body and clamping system FAQ What materials is this insert suitable for? The TDMN110304 UX30 insert is an uncoated carbide design optimised for applications where low cutting forces and good chip formation are required; suitability depends on the specific workpiece material and should be checked against the chosen cutting parameters. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius increases edge strength during interrupted cuts and improves surface finish on faces and shoulders; it helps distribute cutting forces and reduces the tendency for edge chipping. Is this insert compatible with all milling bodies? Compatibility requires matching the insert seat, geometry and clamping method; the TDMN110304 must be used in Tungaloy milling bodies designed for this triangular ISO designation for correct fit and secure clamping. Why choose the UX30 grade for milling? The UX30 grade offers a sharp cutting edge in uncoated carbide, prioritising low cutting forces and reliable chip formation, which can be advantageous for thin-walled parts or operations sensitive to heat and force. What must be checked before installation? Confirm the seating geometry, clamping screw and any shim requirements of the milling body; ensure the insert size, thickness and ISO designation correspond to the cutter family to guarantee repeatable positioning and safe use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TDMN 110308 NS740 Wendeplatten - Tungaloy
Benefit from precise finishing, consistent wear resistance and secure system compatibility — ideal for high-quality milling operations. Order directly via Metav Werkzeuge or consult our specialists for application-matched tool selection. TDMN110308 NS740 — Triangular indexable milling insert, 60° geometry, 0.8 mm corner radius (Tungaloy) The TDMN110308 NS740 is a triangular indexable insert designed for milling, optimised for finishing and light cuts in steel within compatible Tungaloy milling systems Triangular 60° geometry for versatile milling NS740 cermet grade for superior surface finish 0.8 mm corner radius for accurate edge definition Compatible with Tungaloy milling systems Optimised finishing performance for consistent surface quality The insert is engineered as a cermet finishing grade to deliver improved surface finish and tight dimensional control in finishing and light machining of steel. The NS740 composition emphasises stable edge behaviour and uniform wear, which reduces variability part-to-part and helps maintain tolerances over longer tool life. As an indexable insert, it offers repeatable edge seating and measurable performance, supporting predictable cycle times and fewer interruptions for rework. Secure seating and straightforward system integration A core advantage is the standardised triangular 60° geometry combined with a defined seat requirement: plate seat, geometry and milling body must match technically for secure clamping and optimal heat transfer. The insert’s 60° shape and a thickness of 3.18 mm ensure mechanical stability in appropriate cutter bodies. The absence of a centre hole and a plain seat design focus the clamping load on the periphery, delivering stable cutting conditions when mounted in compatible Tungaloy systems. Predictable edge life and productivity in finishing cuts The 0.8 mm corner radius supports accurate edge definition and smoother transitions during shoulder and face milling, reducing vibration and improving surface integrity. For finishing passes, the NS740 grade balances sharpness and wear resistance: sharper edges for quality surfaces, yet robust enough to resist premature breakdown. This combination translates into efficient machining cycles, fewer insert changes and a measurable impact on overall process stability and output. Contact Metav Werkzeuge for tailored advice on selecting the correct Tungaloy insert and to ensure ideal seating and geometry compatibility; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6844091 Manufacturer SKU: TUN6844091 SKU: 6844091-Tungaloy Model series: Milling indexable inserts Manufacturer article number: 6844091 Facts ISO designation: TDMN110308 Plate size: 11 Plate thickness: 3.18 mm Included angle: 60° Relief angle: 15° Corner radius: 0.8 mm Special features Grade: NS740 (cermet) Material: Carbide Insert form: Triangular Hole: without hole Chipbreaker: none Typical application: finishing and light machining of steel System: for Tungaloy milling systems (plate seat and body must match) FAQ Is this insert suitable for finishing steel? The TDMN110308 NS740 triangular indexable insert is specified for finishing to light machining of steel, offering high surface quality and consistent wear for dimensional accuracy. Which tool bodies are compatible with this insert? Compatibility requires matching the insert seat, geometry and milling body; the insert is intended for use with Tungaloy milling systems that accept TDMN-format triangular inserts. What benefits does the NS740 cermet grade provide? NS740 delivers a balance of sharpness and wear resistance, improving surface finish and promoting even wear, which supports repeatable finishing results. Can the insert be used for heavy roughing or high-feed milling? This grade is optimised for finishing and light cuts; for heavy roughing or high-feed applications, select a grade and geometry designed specifically for higher metal removal rates. What are the key edge and dimensional specs to consider? Key specifications include a 60° included angle, 0.8 mm corner radius and 3.18 mm plate thickness; confirm these match the cutter body and required machining strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TDMN 110308 UX30 Wendeplatten - Tungaloy
Take advantage of a sharp-edge UX30 grade, uncoated carbide insert with a 0.8 mm corner radius and 15° relief to reduce cutting forces and improve chip formation; compatible with Tungaloy milling systems for consistent productivity. Order directly via Metav Werkzeuge or request technical advice from our consultants. TDMN110308 UX30 indexable milling insert for milling by Tungaloy The TDMN110308 UX30 is an uncoated carbide, triangular indexable insert designed for precision milling in Tungaloy milling systems, suitable for face, shoulder, slot, high-feed and contour milling where chip control and low cutting forces are priorities Sharp cutting edge for low cutting forces UX30 uncoated carbide for reliable chip control Triangular 11 mm form with 0.8 mm corner radius Compatible with Tungaloy milling systems Improved machining efficiency through optimised chip formation The uncoated UX30 grade provides a sharp cutting edge and stable chip formation, which leads to reduced cutting forces and smoother material removal during milling. In applications such as face and shoulder milling, the combination of a 0.8 mm corner radius and a 15° relief angle helps to maintain tool engagement while preventing premature part deflection. This results in more consistent surface quality and fewer interruptions in production, particularly when processing ductile or mixed materials where controlled chips are essential. Precision geometry that supports repeatable productivity The triangular 11 mm geometry with an included angle of 60° provides three usable cutting corners per insert, supporting efficient tool utilisation and predictable performance. A thickness of 3.18 mm contributes to secure clamping and rigidity in the milling body, while the ISO designation 110308 ensures compatibility checks with appropriate toolholders. By selecting an insert with these defined dimensions and an uncoated carbide substrate, workshops achieve dependable cycle times and simpler process parameter settings for routine milling tasks. System compatibility and practical workshop management This insert is intended for use in Tungaloy milling systems where the insert seat, geometry and milling body are matched for the intended tool family. The modular system design—milling body, insert, clamp screw and possible backing—allows rapid replacement and straightforward inventory handling. The insert’s configuration, without a central hole and without a chipbreaker, is geared towards applications prioritising low cutting forces and clear, continuous chip evacuation. For production environments requiring predictable tool changes and minimal setup time, this configuration supports efficient workflows and reduced downtime. For ordering or application advice on the TDMN110308 UX30 from Tungaloy, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss tool compatibility and procurement options Technical data Article number: 6807794 SKU: 6807794-Tungaloy Manufacturer SKU: TUN6807794 Manufacturer: Tungaloy Numerical specifications Corner radius: 0.8 mm Thickness: 3.18 mm Size: 11 Included angle: 60° Relief (free) angle: 15° ISO code: 110308 Designs & special features Triangular form Uncoated carbide substrate Grade UX30 No central hole No chipbreaker Intended application: milling (face, shoulder, slot, high-feed, contour) System requirement: matching insert seat, geometry and milling body Model series: milling indexable inserts FAQ What materials is the insert suitable for? The UX30 uncoated carbide insert is designed for general milling tasks and delivers good chip formation; material suitability depends on the specific workpiece and machining parameters for the TDMN110308. How many cutting edges are available per insert? The triangular form provides three cutting corners on the TDMN110308 UX30 insert, enabling economical index changes. What is the corner radius and why is it important? The corner radius is 0.8 mm; this radius balances edge strength and surface finish, helping to reduce cutting forces during milling. Is this insert compatible with all milling bodies? Compatibility requires a matching insert seat and geometry; the TDMN110308 must be used in Tungaloy milling systems or holders specified for ISO 110308 geometry. Does the insert come with a chipbreaker? This specific insert is supplied without a chipbreaker, which suits operations prioritising low cutting forces and uninterrupted chip evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TGTT L2020K AH996 Wendeplatten - Tungaloy
The PVD‑coated AH996 carbide and the ISO triangular 60° geometry with a 30° clearance angle combine to deliver stable chip control and consistent cutting performance; the 2.38 mm plate thickness and cylindrical hole with countersink ensure secure clamping and repeatable seating. Order the TGTTL2020K AH996 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TGTT L2020K AH996 — Tungaloy indexable insert for turning, PVD‑coated carbide, 60° TGTTL2020K AH996 Tungaloy indexable insert — an ISO‑standard triangular insert designed for reliable external and internal turning in production environments PVD-coated AH996 carbide Sharp cutting edge for process security Triangular ISO insert, 60° One-sided chipbreaker, with hole High reproducibility and wear resistance for continuous turning The PVD‑coated AH996 carbide substrate provides a balance of wear resistance and edge toughness that supports long cutting intervals in serial turning. The coating technology increases surface hardness while preserving a sharp cutting edge, which reduces built‑up edge and improves dimensional consistency. This results in more predictable tool life and fewer unscheduled interruptions, making the insert particularly suitable for production runs where process security and uptime are priorities. Reliable geometry and secure clamping for stable machining The insert features an ISO L2020K designation in a triangular form with a 60° cutting angle and a 30° clearance (freespace) angle, optimised for both external and internal turning operations. The plate thickness of 2.38 mm and the cylindrical hole with a single‑side countersink (40°–60°) ensure precise seating in compliant ISO holders and bores. These dimensional characteristics support accurate repeat mounting and minimise play, which directly benefits component tolerances and surface finish quality. Efficient chip control and material versatility in turning tasks Equipped with a one‑sided chipbreaker, the insert directs chip flow for consistent evacuation in a wide range of turning conditions. Select the AH996 chipbreaker and grade to match the workpiece material and machining stability — the combination promotes stable chip formation and reduces machining noise. The system approach (ISO insert plus matching external holder, shim/clamping set and replacement screws) allows quick insert changes and predictable cutting behaviour, enhancing both productivity and process planning. For guaranteed process reliability with Tungaloy AH996 grade inserts, contact Metav Werkzeuge for tailored technical advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6822041 SKU: 6822041-Tungaloy Manufacturer SKU: TUN6822041 Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Core measurements ISO designation: L2020K Plate form: triangular Size: L2 Cutting angle: 60° Clearance angle: 30° Thickness: 2.38 mm Design and applications Grade/coating: AH996, PVD‑coated carbide Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: one‑sided Typical application: external and internal turning System build: ISO insert, matching external holder or boring bar, shim/clamping set, spare screws FAQ What ISO designation does this insert have? The insert carries the ISO designation L2020K, corresponding to the triangular form and dimensional class for the TGTTL2020K AH996 Tungaloy indexable insert. Which materials and operations suit this grade? The AH996 grade with its PVD coating is designed for turning tasks that require a sharp cutting edge and reliable wear resistance; it performs well across typical turning applications when the chipbreaker and grade are matched to the workpiece and stability. How does the hole and countersink affect mounting? The insert’s cylindrical hole with single‑side countersink (40°–60°) ensures stable seating in ISO‑compatible holders and supports repeatable clamping torque and alignment for consistent machining results. What are the main benefits of the triangular 60° geometry? A 60° triangular geometry provides multiple indexing corners and a favourable approach angle for many turning operations, offering versatility and economical use of each insert corner in serial production. Is the TGTTL2020K compatible with standard ISO holders? Yes; the TGTTL2020K is an ISO‑standard turning insert and its compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness — select the corresponding ISO holder and clamping set for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TGTT L2020K AH997 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide AH997, ISO-standard geometry and a precise 30° clearance angle for consistent, wear-resistant turning results; order the insert directly via Metav Werkzeuge or consult the technical team for application matching. TGTT L2020K AH997 TGTTL2020K — Turning insert (ISO) by Tungaloy A TGTTL2020K AH997 ISO triangular turning insert designed for ISO-standard external and internal turning, offering a sharp cutting edge and high process security. PVD-coated carbide grade AH997 Wear- and fracture-resistant cutting grade ISO-standard triangular insert L2 with 30° clearance Cylindrical hole with 40°–60° countersink Consistent cutting performance for efficient turning The combination of a PVD-coated surface and a carbide substrate in grade AH997 delivers a balance of wear resistance and edge stability that reduces unplanned tool changes. The insert’s geometry is configured for predictable cutting forces and a sharp cutting edge, which supports stable chip formation and helps maintain component tolerances over longer production runs. This results in improved process throughput and a lower cost per part when compared with tools that require more frequent regrinding or replacement. Precise ISO compatibility that simplifies setup Designed as part of the ISO turning insert family, the geometry and tolerance class ensure compatibility with standard clamping systems when the holder is selected according to form, free clearance angle, fastening type, size and thickness. The triangular L2 format and a plate thickness of 2.38 mm combine with a 30° clearance to provide secure seating in many common external holder styles. The insert’s cylindrical hole with a one-sided countersink (40°–60°) yields repeatable clamping and simplifies torque setting for the clamping screw, reducing setup time and the incidence of mounting errors. Selectable chip control and process security for diverse turning tasks This cutting grade is specified as wear- and break-resistant, and the insert is supplied with a single-sided chipbreaker, enabling adaptation to varied cutting conditions. For operations that demand a sharp cutting edge alongside dependable process security, the grade performs reliably; the chipbreaker geometry should be matched to the workpiece material and machining stability to achieve optimal chip evacuation and surface finish. The insert’s characteristics support consistent cycle times and help to avoid unexpected interruptions during continuous production. Practical system advantages for the workshop The insert is intended to be used within the standard system build of an ISO turning setup: ISO insert, suitable outer holder or boring bar, shim/locking set and replacement screws. This system approach ensures spare parts and replacements are easy to source and fit, minimising downtime. The triangular shape and ISO coding also make inventory management straightforward, while the robust AH997 coating technology contributes to longer in-service life and more predictable tool change intervals — a clear advantage for high-volume turning operations seeking to increase machine utilisation. For tailored application advice or to reserve TGTTL2020K AH997 inserts, contact Metav Werkzeuge’s technical consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for rapid, application-specific support Technical Data Article number: 6822042 Manufacturer SKU: TUN6822042 Merchant SKU: 6822042-Tungaloy Brand: Tungaloy Model series: ISO turning inserts Facts Geometry designation: L2020K Insert designation: TGTTL2020K Clearance angle: 30° Included angle: 60° Plate thickness: 2.38 mm Plate size: L2 Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Cutting material: PVD-coated carbide (grade AH997) Grade properties: wear- and fracture-resistant for turning Chip control: single-sided chipbreaker Plate form: triangular System requirements: compatible holder, shim/locking set, replacement screws Typical use: external and internal turning; select chipbreaker and grade to suit material and stability FAQ What holders are compatible with this ISO triangular insert? Compatibility depends on the holder’s form, free clearance angle, tolerance class, fastening method, size and thickness; the TGTTL2020K AH997 insert fits holders designed for ISO triangular L2 inserts. Is the TGTTL2020K AH997 suitable for finishing and roughing? The AH997 grade is designed for wear resistance and edge stability; the TGTTL2020K can be used for both finishing and certain roughing tasks, with chipbreaker choice and cutting parameters adjusted to the operation. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) on the TGTTL2020K provides repeatable seating and secure clamping, which improves mounting consistency and reduces the risk of movement under load. What are the main advantages of the PVD coating on this insert? The PVD-coated surface on the AH997 grade increases wear resistance and helps maintain a sharp cutting edge, contributing to predictable tool life and process reliability for turning operations. Which components complete the system with this insert? A compatible outer holder or boring bar, the correct shim/locking set and replacement screws form the recommended system for secure and accurate use of the TGTTL2020K insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TGTT L2020K AH998 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated carbide AH998 grade and ISO conformity for reliable process security and extended tool life; the triangular 60° geometry with a 30° clearance ensures stable seating and consistent cutting performance. Order the TGTTL2020K insert directly via Metav Werkzeuge or ask the consultants for tailored process parameters. TGTT L2020K AH998 – Tungaloy ISO turning insert, 60° triangular The TGTT L2020K AH998 is an ISO turning insert from Tungaloy, designed for external and internal turning where a sharp cutting edge and high process reliability are required. PVD-coated carbide AH998 for process security ISO L2020K triangular 60° insert 30° clearance and 2.38 mm thickness Cylindrical hole with 40°–60° countersink Consistent machining through PVD-coated carbide for longer tool life The PVD‑coated carbide grade AH998 provides a wear‑ and fracture‑resistant cutting edge that supports stable machining over extended cycles. The coating reduces flank wear and helps preserve the edge geometry under intermittent loads; this results in fewer insert changes and less unplanned downtime. For workshop managers and process engineers, the clear outcome is improved uptime and predictable tool consumption, enabling simpler planning of inserts and replacement parts. Straightforward integration with ISO holders and clamping systems The insert conforms to the ISO designation L2020K, so compatibility with holders is determined by the insert’s form, 30° clearance, tolerance class, fastening method, size and thickness. Integration requires a matching external holder or boring bar, plus the appropriate backing plate or clamping set and replacement screw. For production lines the standardised geometry simplifies inventory and reduces the number of specialised holders needed, supporting faster tool changes and consistent set‑up reproducibility. Reliable performance where a sharp edge and process security are essential This grade is intended for turning operations that demand a sharp cutting edge together with process stability. The triangular, 60° geometry concentrates the cutting forces at defined cutting corners, while the single‑sided chipbreaker assists chip control for many turning tasks. Such a configuration is particularly effective when cyclic loads or minor interruptions occur; the combination of geometry and AH998 composition reduces the risk of unexpected edge chipping and helps maintain surface quality with fewer interventions. Stable seating and economical use thanks to precise geometry With a plate thickness of 2.38 mm and a triangular 60° form, the insert offers firm seat contact and reliable clamping in standard ISO seats. The cylindrical hole with a 40°–60° countersink secures repeatable positioning and torque transmission, which is important for maintaining concentricity and avoiding insert movement during heavy cuts. The result is reproducible part quality and a positive effect on overall tool economy through fewer reworks and extended service life of the cutting edge. Contact Metav Werkzeuge for specific cutting data, availability and application advice for the Tungaloy TGTTL2020K L2020K AH998 ISO turning insert; specialists at Metav Werkzeuge can recommend the optimal holder and parameters for the intended turning task. Technical Data Article number: 6822043 SKU: 6822043-Tungaloy Manufacturer SKU: TUN6822043 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Thickness: 2.38 mm Clearance angle: 30° Included angle: 60° Countersink angle: 40°–60° Size: L2 Special features Material: carbide Coating: PVD Grade: AH998 Shape: triangular Hole: with hole; cylindrical hole + single-side countersink Chipbreaker: one-sided Application: turning ISO designation: L2020K FAQ What are the principal benefits of the TGTTL2020K AH998 insert? The TGTTL2020K AH998 insert from Tungaloy is a PVD‑coated carbide grade offering wear‑ and fracture‑resistant performance and a sharp cutting edge, delivering enhanced process reliability in turning operations. Which factors determine whether the insert fits a specific holder? Compatibility is governed by form, clearance angle (30°), tolerance class, fastening method, overall size and plate thickness (2.38 mm); matching the ISO L2020K designation ensures the correct seat and clamping arrangement. For which turning operations is this insert suited? The insert is intended for external and internal turning where a sharp edge and process stability are required; the single‑sided chipbreaker supports controlled chip formation in typical turning cycles. How does the hole and countersink design affect performance? The cylindrical hole with a 40°–60° single‑side countersink provides repeatable positioning and secure clamping, reducing the risk of insert movement and contributing to consistent part geometry. What does the AH998 grade mean in practice? AH998 denotes a PVD‑coated carbide composition designed to resist wear and chipping, helping to maintain edge integrity under varying cutting conditions and extending the usable life of each insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TGTT L2020K AH999 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH999 carbide and ISO-standard triangular form for stable, repeatable turning results; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TGTT L2020K AH999 turning insert by Tungaloy — PVD-coated carbide, 30° relief TGTT L2020K AH999 is an ISO-format triangular turning insert designed for external and internal turning operations, offering high process security and a sharp, durable cutting edge. ISO triangular insert TGTTL2020K L2020K PVD-coated AH999 carbide, high wear resistance 30° relief, 60° cutting angle for versatility Cylindrical hole with single-side countersink 40°–60° Consistent tool life through a wear-resistant coating The combination of a PVD-coated carbide grade and a robust insert geometry delivers reliable tool life and consistent performance in series production. The AH999 coating is engineered for resistance to flank wear and chipping, which reduces unplanned interruptions and keeps machining times predictable. For industrial turning applications this means fewer insert changes and more stable cycle times, supporting higher throughput with lowered process variability. Compatibility and mounting for secure clamping Compatibility with holders depends on insert form, relief angle, tolerance class, fastening method, size and thickness; the insert features a cylindrical hole with a single-side countersink (40°–60°) to match standard clamping systems. A correct pairing of insert and clamping kit ensures the intended cutting geometry is preserved and that the 30° relief angle is maintained under cutting loads. When assembling, check that the shim and screw dimensions correspond to the ISO holder to guarantee repeatable positioning. Application guidance for material choice and chip control The triangular geometry and one-sided chipbreaker suit a wide range of turning tasks; select the chipbreaker and grade according to the workpiece material and machining conditions. The insert is intended for turning operations where a sharp cutting edge and process security are required. In practice, this insert performs well when used with stable setups and appropriate cutting parameters, and it is compatible with standard ISO tool systems when matched correctly. For specification checks, availability and tailored recommendations on the TGTTL2020K AH999 insert, contact Metav Werkzeuge for fast technical support and order assistance. Technical data Manufacturer article number: 6822044 Manufacturer SKU: TUN6822044 SKU: 6822044-Tungaloy Material: carbide Coating: AH999 (PVD) Model series: ISO turning inserts Usage: turning Form: triangular Size: L2 Thickness: 2.38 mm Relief angle: 30° Cutting angle: 60° Hole: with hole Hole style: cylindrical hole + single-side countersink 40°–60° Core data Thickness: 2.38 mm Relief angle: 30° Cutting angle: 60° Countersink range: 40°–60° Format: L2020K (ISO) Special features PVD-coated carbide grade AH999 One-sided chipbreaker ISO-standardised insert compatibility Designed for wear and breakage resistance Suitable for external and internal turning System recommendation: holder, shim, clamping kit, replacement screws FAQ What machining tasks is this insert designed for? The TGTTL2020K AH999 insert (Tungaloy, SKU TUN6822044) is designed for external and internal turning where a sharp cutting edge and reliable process security are required. How is the insert fixed to the holder? The insert mounts using a cylindrical hole with a single-side countersink (40°–60°); compatibility depends on matching form, relief angle, tolerance class, fastening method, size and thickness. Can standard ISO holders be used with this insert? Yes, the insert follows ISO standards (L2020K format) and is compatible with ISO holders provided the holder matches the insert’s form, relief and fastening specifications. Which materials are suitable for machining with this grade? The PVD-coated AH999 carbide is intended for a broad range of turning applications; choose the chipbreaker and cutting parameters according to the workpiece material and required surface finish. Does the insert offer good chip control? The one-sided chipbreaker provides effective chip control in many turning operations; pairing the correct chipformer and cutting data enhances chip evacuation and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TGTT R2020K AH1004 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide and a 30° relief angle for reliable, process-secure turning operations; the ISO‑compliant triangular design and standard hole geometry ensure fast tool changes and predictable clamping. Order supply or request specification advice from Metav Werkzeuge for production-ready integration. TGTT R2020K AH1004 – TGTTR2020K ISO turning insert, PVD‑coated carbide, 30° relief, triangular The TGTTR2020K is an ISO‑standard triangular indexable insert for external and internal turning, offering a sharp cutting edge and a single‑sided chipbreaker for stable material removal. PVD-coated carbide for wear resistance ISO-standard triangular insert 30° relief for secure cutting Cylindrical hole with countersink 40°–60° Consistent cutting performance for production turning The insert’s PVD-coated carbide substrate provides sustained wear resistance and edge integrity, helping to maintain process security in series production. The PVD layer reduces flank wear and supports a stable cutting edge under interrupted or continuous cuts, which translates into longer effective tool life and fewer interruptions on the shopfloor. For operations that demand repeatable surface quality, the combination of a sharp geometry and a coated carbide grade reduces variability between parts and shortens the need for frequent regrinds. Designed for reliable clamping and quick tool changes Built to the ISO-standard form, the indexable plate is compatible where shape, relief angle, tolerance class, clamping method, size and thickness match the holder. The cylindrical hole with a 40°–60° countersink secures consistent seating and torque transfer, while the triangular outline ensures simple orientation in standard external holders and boring bars. Using the correct holder and clamping kit avoids slippage and preserves the insert’s cutting edge, so set‑up time is minimised and runout is reduced. Geometry and chip control that suit process-secure turning The insert features a 30° relief and a 60° included angle that balance cutting-edge strength with accessibility for precision turning. The single-sided chipbreaker promotes predictable chip formation for many turning tasks and reduces the risk of chip accumulation in the cutting zone. With a compact contact area and a 2.38 mm thickness, the plate gives a solid bearing surface and edge support; the R2 designation defines a small nose radius that is suitable for fine finishing passes or controlled light cuts where dimensional accuracy is critical. System approach: how the insert fits into the tooling setup This indexable plate is part of a system that includes the appropriate external holder or boring bar, a backing/locating pad and clamping set plus replacement fasteners. Specifying the correct tolerance class, holder form and screw combination completes a secure mounting solution and protects the insert from chipping caused by unstable support. Planning tool inventory with matching inserts and holders reduces downtime and simplifies reconditioning cycles, supporting higher throughput and consistent part quality. For process‑critical turning tasks, opt for the AH1004 grade from Tungaloy and contact Metav Werkzeuge for tailored application advice, compatibility checks and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6822049 SKU: 6822049-Tungaloy Manufacturer SKU: TUN6822049 Model series: ISO-Drehwendeschneidplatten Designation: TGTTR2020K Facts Relief angle: 30° Included angle: 60° Thickness: 2.38 mm Size / radius: R2 Special features Material: carbide Coating: PVD Shape: triangular Chipbreaker: single-sided Hole: with cylindrical hole + one-sided countersink (40°–60°) FAQ What applications suit this insert best? The AH1004‑graded TGTTR2020K insert is intended for general external and internal turning where a sharp cutting edge and high process security are required; it is suitable for finishing and light to medium turning tasks. How does the PVD coating affect performance? The PVD-coated carbide surface on the TGTTR2020K reduces flank wear and enhances edge life, improving consistency in production runs and supporting longer tool intervals. What holder features are necessary for correct use? A compatible ISO external holder or boring bar with the correct form, clamping set and screw size is required to match the TGTTR2020K’s geometry, clearance angle and hole/countersink arrangement for secure seating. Which geometry details are important during setup? Pay attention to the 30° relief, 60° included angle, 2.38 mm thickness and R2 nose radius; these determine accessible cutting conditions, stiffness and the achievable surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TGTT R2020K AH1005 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, PVD-coated carbide AH1005 for wear and chip resistance, and ISO-standard compatibility to maintain stable production cycles; order directly via Metav Werkzeuge or consult our specialists for selection and mounting advice. TGTT R2020K AH1005 Tungaloy indexable insert for turning — triangular, 60° included angle TGTT R2020K AH1005 Tungaloy indexable insert is an ISO-standard triangular turning insert designed for external and internal turning operations in diverse production environments PVD-coated carbide AH1005 grade 30° clearance angle for secure cutting Triangular form with 60° included angle Cylindrical hole with single countersink (40°–60°) Extended edge life through optimised grade and coating The PVD-coated carbide composition AH1005 delivers a balance of wear resistance and fracture toughness suited to continuous turning operations. By using a modern PVD layer on a robust cemented carbide substrate, the insert provides improved tool life and consistent cutting-edge behaviour under medium to demanding process conditions. This results in fewer tool changes and more predictable cycle times, which supports cost-effective production and reduces unplanned downtime. Reliable geometry for stable chip control and secure clamping The triangular geometry with a 60° included angle and 30° clearance angle ensures an accessible cutting edge for a variety of turning tasks while maintaining secure seating in ISO-compatible holders. The cylindrical hole with single countersink (40°–60°) supports standard clamping systems and simplifies indexation. Where insert and holder compatibility is crucial, form, relief angle, tolerance class, fastening method, size and thickness determine the match; the modular system allows fast replacement and repeatable positioning. Suitable for a wide range of turning applications Designed for both external and internal turning, the insert’s one-sided chipbreaker geometry is matched to the AH1005 grade to support reliable chip formation across common steels and alloyed materials. The combination of sharp cutting edge and chip control reduces cutting forces and improves surface finish in many general turning tasks. For operators seeking predictable results, the insert is a practical choice when process security and a sharp edge are required together. Practical integration into production workflows As an ISO-standard turning insert, the plate forms part of a system that includes the matching external holder or boring bar, a support shim or clamp set and replacement screws. Clear labelling and standardised dimensions facilitate inventory management and rapid changeover. For workshops aiming to increase throughput with consistent results, the insert’s PVD coating and grade selection contribute to longer tool intervals and reproducible part quality, reducing overall machining cost per component. For the highest process security with a sharp, wear-resistant edge, contact Metav Werkzeuge to specify the TGTT R2020K AH1005 insert or request tailored advice — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: 6822050 SKU: 6822050-Tungaloy Manufacturer SKU: TUN6822050 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Label: TGTTR2020K AH1005 Tungaloy-Wendeplatte Numbers / Core Technical Data Thickness: 2.38 mm Clearance angle: 30° Included angle: 60° Size: R2 Hole: with hole Hole style: cylindrical hole + single countersink (40°–60°) Designs / Special Features Material: carbide (cemented carbide) Coating: PVD-coated (AH1005 grade) Shape: triangular Chipbreaker: one-sided Application: turning (external and internal) ISO-standardised turning insert; compatibility determined by form, tolerance and fastening FAQ What turning operations suit this insert best? The TGTT R2020K AH1005 insert is intended for general external and internal turning where a sharp cutting edge and good process security are required; it performs well in medium-duty production cycles. Which materials can be machined with this insert? The AH1005 PVD-coated carbide grade is designed for a broad range of steels and alloyed materials; its composition and chipbreaker support stable cutting and surface quality in typical turning applications. How does the hole with countersink affect clamping? A cylindrical hole with single countersink (40°–60°) ensures reliable seating in standard ISO-compatible clamps and supports repeatable indexation and secure clamping during turning. Is the insert compatible with my holder? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the TGTT R2020K is ISO-standardised, which facilitates matching to corresponding holders and boring bars. What advantages does the AH1005 grade provide? AH1005 offers a compromise between wear resistance and edge strength: the PVD coating improves life under abrasive conditions while the carbide core resists chipping, supporting consistent production outcomes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TGTT R2020K AH1006 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability and the standardised ISO form for predictable tool life and stable process control; order genuine Tungaloy inserts directly via Metav Werkzeuge or request bespoke advice from the consultants. TGTT R2020K AH1006 turning insert — PVD-coated carbide, 30° clearance (Tungaloy) TGTT R2020K AH1006 turning insert from Tungaloy for external and internal turning, designed to deliver a sharp cutting edge, controlled chip formation and high process security in demanding production environments PVD-coated carbide for wear resistance Triangular insert R2, 2.38 mm thick 30° clearance angle, one-sided chipbreaker Cylindrical hole with 40°–60° countersink Longer tool life through PVD-coated carbide and a resilient grade The PVD-coated carbide grade AH1006 combines a hard, wear-resistant coating with a tough substrate to reduce flank wear and minimise chipping during interrupted cuts. This composition yields a stable cutting edge that sustains consistent surface finish over longer intervals, lowering the frequency of tool changes and supporting continuous production runs. For environments where a sharp geometry and process security are required, the coated grade is optimised to resist both abrasive and adhesive wear mechanisms common in turning operations. ISO compatibility and secure clamping for repeatable positioning Supplied as an ISO-series triangular insert, the component matches holders according to form, clearance angle, tolerance class, fastening method, size and thickness. The triangular R2 shape and the cylindrical hole with single-sided countersink (40°–60°) ensure positive seating and repeatable location in compatible external holders or boring bars. With a plate thickness of 2.38 mm and an included angle of 60°, the geometry is suitable for both external and internal turning when paired with the correct shim and clamping set, enabling accurate index changes and minimal runout in serial machining. Process stability and controlled chip formation for efficient turning A one-sided chipbreaker and the sharp edge geometry promote predictable chipbreaking and evacuation, reducing the risk of entanglement and improving surface quality. The combination of insert design and the AH1006 grade focuses on cost-effective productivity: fewer interruptions for tooling, improved cycle-time consistency and reduced scrap. In practical terms, this insert functions as part of a system — insert, holder, shim and fastening hardware — where matching the chipbreaker and grade to the workpiece and machining conditions optimises performance and tool life. For tailored selection of genuine Tungaloy turning inserts and expert matching to specific applications, contact Metav Werkzeuge for technical advice and supply of the item with SKU TUN6822051 Technical data Article number: 6822051 Manufacturer SKU: TUN6822051 Our SKU: 6822051-Tungaloy Manufacturer: Tungaloy Facts Thickness: 2.38 mm Included angle: 60° Clearance angle: 30° Size: R2 Special features ISO-series insert TGTTR2020K PVD-coated carbide grade AH1006 Triangular plate form One-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) Application: turning Compatibility: external holders, boring bars, shim and clamping set FAQ What applications suit this insert best? This insert is intended for external and internal turning; the AH1006 grade and chipbreaker are chosen for operations requiring a sharp cutting edge and stable process security. How does the coating improve performance? The PVD-coated layer on the AH1006 grade increases abrasion resistance and helps maintain a sharp cutting edge, extending effective tool life under typical turning conditions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; the triangular ISO geometry requires a matching external holder or boring bar and appropriate shim and clamping set. What is the exact geometry and how does it affect use? The insert has a 60° included angle, R2 size and a 30° clearance; these dimensions favour versatile turning tasks while enabling controlled chip formation with the one-sided chipbreaker. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TGTT R2020K AH1007 Wendeplatten - Tungaloy
High process security and a resistant cutting edge ensure consistent productivity in turning operations; the PVD-coated carbide AH1007 grade delivers wear and chip resistance while the triangular 60° geometry offers stable clamping and reliable cutting performance. Order the TGTT R2020K AH1007 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TGTT R2020K AH1007 Turning indexable insert — PVD-coated carbide, 30° clearance — Tungaloy TGTT R2020K AH1007 is an ISO-standard turning indexable insert designed for external and internal turning, offering a 60° triangle form and a single-sided chipbreaker for controlled chip formation PVD-coated carbide grade AH1007 Triangle insert, 60° included angle 30° clearance angle ensures sharp cutting edge Cylindrical hole with single-sided countersink Precise, ISO-compatible solution for turning workflows The insert is an ISO-standard turning insert, designed to match holders by form, clearance angle, tolerance class, fastening method, size and thickness. This compatibility principle reduces setup time and avoids mismatches that cause vibration or poor surface finish. With a defined 30° clearance angle and the 60° triangle geometry, the component provides a predictable seating and cutting orientation, which leads to reproducible cutting conditions and reduced scrap rates. Where process reliability is paramount, the combination of standardised form and exact tolerances supports faster job changes and consistent part accuracy. Durable cutting edge and improved process security The AH1007 grade is a PVD-coated carbide developed for turning applications that demand a sharp cutting edge plus resistance to both wear and chipping. The PVD coating increases thermal stability at the cutting zone and improves adhesive wear resistance, while the cemented carbide substrate maintains edge strength. This results in longer effective tool life and fewer unplanned interruptions. For shops seeking to balance economy and performance, the wear properties allow higher metal removal rates with maintained surface quality, translating into measurable productivity gains. Geometry and clamping designed for stable machining The triangular form with a 60° included angle and an R2 nose size gives rigidity at the cutting point, reducing deflection on long overhangs or interrupted cuts. The insert thickness of 2.38 mm supports secure clamping forces, and the cylindrical hole with a single-sided countersink (40°–60°) ensures reliable fixation in compatible toolholders. The single-sided chipbreaker is tailored to produce controllable chips for both external and internal turning, lowering the risk of entanglement and aiding automated chip evacuation. Such geometry choices improve surface finish and dimensional consistency under variable cutting conditions. Productivity advantages and application guidance When used for turning tasks, the combination of AH1007 grade and the single-sided chipbreaker offers a dependable mix of wear resistance and fracture toughness, suitable for a broad range of steels and general turning operations. The insert supports stable cutting parameters and can be integrated into production cycles where repeatability is essential. For best results, match the insert to a holder that accommodates the ISO code R2020K and the triangular form, select cutting data aligned with the material being machined, and consider coolant strategy to extend edge life in high-speed or heavy-duty applications. Seek specialist advice from Metav Werkzeuge to select the correct TGTT R2020K AH1007 insert, optimise cutting parameters and ensure the best grade and chipbreaker for the intended turning application Technical data Article number: 6822052 Manufacturer SKU: TUN6822052 SKU: 6822052-Tungaloy Model series: ISO turning indexable inserts Material: carbide Grade/coating: AH1007 / PVD-coated ISO designation: TGTTR2020K Insert form: triangle (60°) Size: R2 Thickness: 2.38 mm Clearance angle: 30° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Key specifications Thickness: 2.38 mm Included angle: 60° Clearance angle: 30° Countersink range: 40°–60° Size designation: R2 Special features ISO-standardised turning insert PVD-coated carbide for wear resistance Single-sided chipbreaker for controlled chips Cylindrical hole with one-sided countersink for secure clamping Suitable for external and internal turning applications Triangle geometry for rigidity and repeatable seating FAQ What materials is this insert suitable for? The TGTT R2020K AH1007 insert is a PVD-coated carbide grade designed for general turning; its wear resistance and edge strength make it suitable for a wide range of steels and common turning applications. How does the chipbreaker affect machining? The single-sided chipbreaker on this triangular insert promotes controlled chip formation during turning, reducing the risk of long, stringy chips and improving chip evacuation in both external and internal operations. Which holder geometry is required for this insert? The insert follows ISO conventions for triangular turning inserts; compatibility depends on holder form, clearance angle and the R2020K ISO code. Use holders that accept a triangle 60° insert with a cylindrical locating hole and single-sided countersink. What are the main dimensions to check when selecting this insert? Key dimensions include the thickness (2.38 mm), included angle (60°), clearance angle (30°) and the R2 nose size; verify these against the toolholder specifications. Is the insert suitable for interrupted cuts? The triangular geometry and the robust AH1007 grade offer good stability and edge strength for many interrupted cutting scenarios, though feed and depth of cut should be adjusted to application specifics. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 110304 TH03 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard compatibility, uncoated carbide TH03 and a compact geometry for consistent turning performance and predictable chip control. Order the insert directly via Metav Werkzeuge or consult our technical team for selection assistance. TNGA 110304 TH03 Tungaloy turning insert, ISO-standard TNGA 110304 TH03 Tungaloy turning insert is an ISO‑conforming indexable insert designed for external and internal turning operations in industrial machining. ISO-standard triangular insert TNGA110304 Uncoated carbide grade TH03 for low cutting forces 0° relief angle with 0.4 mm corner radius Predictable compatibility that reduces setup time The ISO-standard geometry ensures the insert fits holders that match the form, relief angle, tolerance class, fastening method, size and thickness. The labelling and system construction mean the indexable insert integrates into a tool assembly comprising the compatible holder or boring bar, a seating pad or clamping kit and replacement screws. This predictable interface reduces setup iterations and supports stable, repeatable seating so that changeovers are faster and maintain machining accuracy. Sharp cutting edge for efficient chip formation The uncoated carbide grade TH03 provides a keen cutting edge that favours operations where low cutting forces and good chip formation are priorities. In practice, this results in smoother feed behaviour and consistent surface finish during light to medium turning tasks. The chemical and mechanical properties of the substrate support reliable shearing rather than ploughing, which helps to conserve spindle power and extend productive cutting windows on a wide range of materials. Compact design improves clamping and process security A triangular plate with an 11 mm size and 3.18 mm thickness combines rigidity with multiple indexed corners for economical use. The 0.4 mm corner radius and 0° relief angle produce a defined cutting geometry for finishing and general turning while the cylindrical hole provides a positive central location for secure clamping. The insert is supplied without a chipbreaker, allowing selection of a matching chip control feature and grade according to workpiece material, cutting strategy and machine stability—an approach that helps maintain throughput and surface quality in production environments. For Tungaloy turning quality and rapid availability, contact Metav Werkzeuge for tailored advice and prompt supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6853554 Manufacturer SKU: TUN6853554 SKU: 6853554-Tungaloy Model series: ISO-Drehwendeschneidplatten Insert designation: TNGA110304 Grade: TH03 Material: uncoated carbide Manufacturer: Tungaloy Core specifications Size: 11 Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 0° Included hole: with cylindrical hole Angle: 60° Features and applications Application: turning (external and internal) Plate form: triangular Chipbreaker: none System components: compatible holder, pad/clamping kit, replacement screws Typical use: choose chipbreaker and grade to match material and stability FAQ What materials is this insert suitable for? The TNGA110304 TH03 Tungaloy turning insert is intended for general turning where low cutting forces and good chip formation are required; material suitability depends on grade selection and cutting conditions. How is the insert fixed in the holder? The triangular insert is located and clamped using a cylindrical hole and matched clamping kit; the ISO geometry ensures positional repeatability when paired with an appropriate holder. Does the insert include a chipbreaker? This insert is supplied without a chipbreaker; a matching chip control geometry should be selected based on workpiece material and machining strategy. What are the key dimensions to check for compatibility? Verify the size (11), thickness (3.18 mm), corner radius (0.4 mm) and the 0° relief angle to ensure compatibility with the intended holder and tool system. Is this an ISO‑standard plate and how many corners are usable? Yes — the plate follows ISO conventions for triangular indexable inserts, providing multiple usable cutting corners for economical operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 110304 TH10 Wendeplatten - Tungaloy
Combining the ISO TNGA form with the TH10 uncoated carbide grade delivers low cutting forces and consistently clean finishes in non‑ferrous turning; benefit from the 0.4 mm corner radius and 3.18 mm plate thickness for predictable performance. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNGA 110304 TH10 indexable insert for Turning — Tungaloy TNGA110304 TH10 is an ISO‑standard triangular indexable insert designed for general turning applications where a sharp, uncoated carbide edge improves surface quality and reduces cutting forces. ISO‑standard triangular insert Uncoated carbide TH10 grade 0.4 mm corner radius Cylindrical central hole Stable throughput with a sharp, universal cutting edge The triangular ISO geometry combined with the TH10 uncoated carbide grade is engineered to provide low cutting forces and a clean surface on non‑ferrous materials. The sharp, universal grade supports efficient material removal with reduced power draw, which contributes to steady cycle times in repetitive turning tasks. This specification is particularly helpful where small cutting forces and minimal build‑up on the edge are required to maintain dimensional consistency. Simple fitment and clear holder compatibility The insert follows ISO standards, so compatibility with a matching holder depends on form, relief angle (0°), tolerance class, fastening and the insert’s size and thickness rather than on brand alone. The triangular TNGA geometry with a 60° included angle and a 3.18 mm plate thickness ensures mechanical stability in the clamped position; the cylindrical central hole supports secure fastening and straightforward replacement. Checking these measurable parameters against the toolholder specification prevents misfits and supports repeatable set‑ups. Material behaviour and practical selection guidance Made from carbide and supplied uncoated, this insert suits turning operations on non‑ferrous materials where a clean edge is preferable to a coated surface. The 0.4 mm corner radius balances edge strength and finish: smaller radii help reduce cutting forces and improve surface quality, while still offering adequate resistance to chipping in stable set‑ups. Note that the insert is supplied without a chipbreaker, so selecting a suitable grade and cutting parameters is essential for reliable chip control and predictable results. Discuss specific applications with Metav Werkzeuge to confirm suitability of the Tungaloy TNGA110304 TH10 insert for your turning tasks; our team can advise on holder compatibility and cutting data — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6808074 Manufacturer: Tungaloy SKU: 6808074-Tungaloy Manufacturer SKU: TUN6808074 ISO designation: TNGA110304 Model series: ISO turning indexable inserts Facts Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 mm Included angle: 60° Relief angle: 0° Special features Uncoated carbide, grade TH10 Triangular insert shape Cylindrical central hole No chipbreaker Application: external and internal turning FAQ What materials is this insert best suited for? The TNGA110304 TH10 insert is intended primarily for non‑ferrous materials; the uncoated TH10 carbide grade supports low cutting forces and clean surfaces in such applications. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius provides a compromise between surface finish and edge strength, reducing cutting forces while maintaining adequate resistance to chipping in stable turning conditions. Is this insert compatible with all ISO holders? Compatibility depends on holder form, fixing method, tolerance class, relief angle and plate thickness; the TNGA110304 follows ISO geometry, so match these parameters to the toolholder specification. Does the insert include a chipbreaker? The supplied insert is without a chipbreaker; chip control must therefore be managed through grade selection, toolholder geometry and cutting parameters. What is the plate thickness and included angle? The plate thickness is 3.18 mm and the included angle of the triangular insert is 60°, which contribute to its rigidity in clamped applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 110308 TH10 Wendeplatten - Tungaloy
Reliable choice for productive turning: the uncoated TH10 carbide grade and the 0.8 mm corner radius deliver low cutting forces and clean surface finishes on non‑ferrous materials. Order the insert through Metav Werkzeuge or consult our technical advisors for optimal holder selection. TNGA110308 TH10 – ISO triangular turning insert (uncoated carbide, 0.8 mm radius) by Tungaloy A TNGA110308 TH10 ISO‑standard indexable turning insert designed for external and internal turning where low cutting forces and good surface quality are required ISO‑standard triangular insert Uncoated carbide for low cutting forces Suitable for non‑ferrous materials 0.8 mm corner radius, 60° geometry Consistent finishes from a sharp, uncoated grade The combination of the TH10 uncoated carbide grade and the insert geometry is aimed at operations where minimal cutting force and a tidy surface matter. An uncoated carbide grade often reduces built‑up edge on softer, non‑ferrous alloys and helps maintain dimensional stability during finishing passes. As an indexable insert, the part provides multiple cutting edges per component, which supports predictable process intervals and reduces tool change frequency compared with solid cutters. Robust geometry and secure clamping for repeatable results The triangular form with a 60° included angle and a 0.8 mm corner radius yields a balance between edge strength and accessibility in confined cuts. With a plate thickness of 3.18 mm and an 11 mm inscribed circle, the insert offers core rigidity for general turning tasks. The insert is supplied with a cylindrical hole, enabling positive mechanical clamping in compatible holders. Compatibility to a chosen toolholder depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; checking these parameters ensures correct seating and repeatable cutting forces. Straightforward selection for typical turning tasks Designed for turning applications, the insert does not incorporate a dedicated chipbreaker, so the choice of cutting parameters and holder stability should reflect the workpiece material and machining strategy. For non‑ferrous materials and applications that call for reduced cutting resistance, the TH10 grade supports clean surface generation and stable chip formation. Using this ISO‑conforming insert in a matched holder and clamping set allows predictable results, cleaner finishes and efficient tool utilisation in batch or single‑piece production. For application advice or to secure the TNGA110308 TH10 insert from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and delivery options Technical data Article number: 6808076 SKU: 6808076-Tungaloy Manufacturer SKU: TUN6808076 Model series: ISO‑Drehwendeschneidplatten Designation: TNGA110308 TH10 Tungaloy turning insert Core dimensions Corner radius: 0.8 mm Included angle: 60° Plate thickness: 3.18 mm Inscribed circle / plate size: 11 mm Clearance / free angle: 0° Design and features Triangular plate form Cylindrical hole Uncoated carbide material Grade: TH10 No chipbreaker Application: turning (external and internal) ISO‑standard indexable insert Compatibility depends on form, clearance angle, tolerance, fastening, size and thickness FAQ What materials is this insert suited for? The TNGA110308 TH10 Tungaloy insert is optimised for non‑ferrous materials and applications where an uncoated carbide edge supports low cutting forces and clean surface finishes. Does the insert include a chipbreaker? This TNGA110308 TH10 insert does not feature an integrated chipbreaker; machining strategy and holder stability should be selected to manage chip formation for the intended workpiece. How many usable cutting edges are available per insert? The triangular geometry of the TNGA110308 TH10 indexable insert provides multiple usable edges; rotating to the next edge restores a fresh cutting surface without the need for regrinding. Which holders are compatible with this insert? Compatibility depends on the holder matching the insert form, clearance angle, tolerance class, fastening method, size and thickness; confirm these parameters when selecting a matching external holder or boring bar for the TNGA110308 TH10. What is the hole style and how does it affect clamping? The TNGA110308 TH10 is supplied with a cylindrical hole, enabling secure, repeatable mechanical clamping in holders designed for inserts with a central cylindrical bore. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160304 TH10 Wendeplatten - Tungaloy
TNGA 160304 TH10 Wendeplatte zum Drehen – Tungaloy Die TNGA160304 TH10 Wendeplatte wurde für präzises Außen- und Innendrehen entwickelt und bietet mit unbeschichtetem Hartmetall eine scharfe Universalsorte für Nichteisenwerkstoffe und saubere Oberflächen bei niedrigen Schnittkräften TNGA 160304 TH10 Wendeplatte von Tungaloy ISO-genormt für weite Halterkompatibilität Unbeschichtetes Hartmetall für niedrige Schnittkräfte Dreieckige Form 60° für flexible Einsatzmöglichkeiten Zylindrisches Loch und 0,4 mm Eckenradius Effiziente Zerspanung durch scharfe Universalsorte Die Kombination aus unbeschichtetem Hartmetall und der Sorte TH10 sorgt für niedrige Schnittkräfte und eine saubere Oberfläche, besonders bei Nichteisenwerkstoffen. Aufgrund der ISO-Genormung ist die Platte in vielen Haltersystemen einsetzbar, was Rüstzeiten reduziert und die Wirtschaftlichkeit im Fertigungsprozess erhöht. Die scharfe Schneidkante unterstützt Feinarbeiten ohne unnötige Kräfte in die Maschine einzuleiten. Passgenauigkeit und Systemhinweise für sicheren Einsatz Die TNGA160304 Wendeplatte hat eine dreieckige Plattenform mit 60° Einspannwinkel, einen Eckenradius von 0,4 mm und eine Plattendicke von 3,18 mm. Das zylindrische Loch ermöglicht einfache Befestigung mit Standardklemmsätzen. Bei der Auswahl von Halter, Unterlage und Schrauben sind Form, Freiwinkel und Toleranzklasse zu beachten, damit die Kompatibilität und die schnitttechnische Stabilität gewährleistet bleiben. Anwendungsempfehlung für unterschiedliche Bearbeitungsaufgaben Für Außen- und Innendrehen empfiehlt sich die Wahl der TH10 Sorte, wenn geringe Schnittkräfte und gute Oberflächen im Vordergrund stehen. Da kein Spanbrecher vorhanden ist, ist die Platte besonders geeignet für stabile Aufspannung und Anwendungen, in denen ungestörter Spanfluss keine aktive Spanformung benötigt. Für Fragen zur optimalen Schnittdatenwahl und Halterkombination steht technische Beratung bereit. Empfehlung: Für produktive Zerspanung mit geringer Schnittkraft und hoher Oberflächenqualität die TH10-Sorte von Tungaloy wählen und bei Metav Werkzeuge individuelle Beratung anfragen unter info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6808078 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: TNGA160304 TH10 Tungaloy-Wendeplatte Hersteller SKU: TUN6808078 Fakten Eckenradius: 0,4 mm Winkel: 60° Plattendicke: 3,18 mm Plattengröße: 16 mm Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: TH10 (scharfe Universalsorte für Nichteisenwerkstoffe) Anwendung: Drehen Plattenform: dreieckig Loch: mit Loch (zylindrisches Loch) Spanbrecher: ohne Modellserie: ISO-Drehwendeschneidplatten FAQ Für welche Werkstoffe eignet sich die TNGA160304 TH10 Wendeplatte am besten? Die TNGA160304 TH10 Wendeplatte von Tungaloy ist speziell für Nichteisenwerkstoffe konzipiert und liefert hier durch das unbeschichtete Hartmetall besonders saubere Oberflächen bei niedrigen Schnittkräften. Ist die Platte mit Standard-Außenhaltern kompatibel? Ja, die Platte ist ISO-genormt und somit für viele Standard-Außenhalter geeignet; die tatsächliche Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse und Plattendicke ab. Welchen Einfluss hat der Eckenradius von 0,4 mm? Ein Eckenradius von 0,4 mm unterstützt feinere Oberflächen bei Drehoperationen und reduziert lokale Belastungsspitzen, was besonders bei Schlicht- und Feinbearbeitungen von Vorteil ist. Wie wirkt sich das Fehlen eines Spanbrechers aus? Ohne integrierten Spanbrecher ist die Platte für Anwendungen mit stabiler Aufspannung geeignet; bei Bedarf an Spanunterbrechung empfiehlt sich die Auswahl passender Spanformer oder Halterlösungen. Welche Unterstützung bietet Metav Werkzeuge bei der Auswahl? Metav Werkzeuge bietet technische Beratung zu Schnittdaten, Halterkombinationen und Einsatzbedingungen für die TNGA160304 TH10 Wendeplatte; Kontakt per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 für de-DE: Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNGA 160308 TH10 Wendeplatten - Tungaloy
Combining the sharp TH10 uncoated carbide grade with the ISO‑standard TNGA geometry delivers low cutting forces and clean surface finishes for external and internal turning; the 0.8 mm corner radius and 60° triangular form provide consistent edge stability and repeatable clamping. Order the TNGA160308 directly via Metav Werkzeuge or consult the Metav specialists for holder and clamping recommendations. TNGA160308 TH10 Tungaloy indexable insert for Turning – triangular, 60°, 0.8 mm radius The TNGA160308 is an ISO‑standard triangular indexable insert designed for external and internal turning, featuring an uncoated carbide cutting edge optimised for non‑ferrous materials and applications that demand low cutting forces ISO‑standard triangular insert, 60° geometry Uncoated carbide TH10 for low cutting forces 0.8 mm corner radius for reliable edge strength Cylindrical hole and 3.18 mm thickness for secure clamping Consistent cutting performance with a sharp uncoated grade The combination of the TH10 grade and an uncoated carbide substrate reduces friction and helps to maintain a clean surface finish in applications with low to moderate cutting speeds. This grade is selected where a sharp, uncoated edge supports lower cutting forces and superior finish on non‑ferrous materials; the insert geometry with a 60° included angle concentrates cutting loads effectively while the 0.8 mm corner radius balances edge strength with profile fidelity. As a result, machining cycles benefit from predictable cutting behaviour and reduced rework. Reliable clamping and ISO compatibility for predictable repeatability Built to ISO dimensions, the insert’s form, relief angle and tolerance class determine holder compatibility; the TNGA format and the cylindrical hole allow positive location and stable torque transmission when used with the correct seat and clamping set. The 3.18 mm plate thickness and 0° relief (facing angle) contribute to axial stability in the toolholder, reducing micro‑movement that can affect surface quality. Where process consistency matters, standardised interfaces simplify tool change and maintainability, supporting short downtime and consistent component quality. Application focus and practical selection guidance Intended for turning tasks, this insert is most effective in external and internal operations on non‑ferrous workpieces such as aluminium and brass, where the uncoated edge minimises built‑up edge and preserves finish. The insert is supplied without a chipbreaker, so selection of cutting parameters and coolant strategy should account for chip control requirements; pairing the insert with a holder that offers the correct approach angle and rigidity will ensure the best results. For mixed production, matching the insert grade and chip control options to material and stability yields the greatest productivity gains. Contact Metav Werkzeuge for tailored holder recommendations, matching clamping kits and application advice for the TNGA160308 TH10 Tungaloy insert at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6808079 Manufacturer SKU: TUN6808079 SKU: 6808079-Tungaloy Model series: ISO turning indexable inserts Designation: TNGA160308 TH10 Facts Corner radius: 0.8 mm Included angle: 60° Plate thickness: 3.18 mm Plate size: 16 mm Relief (free) angle: 0° Hole style: cylindrical hole Chipbreaker: none Special features Grade: TH10 (uncoated carbide) Shape: triangular Application: turning (external and internal) Compatibility determined by form, relief, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The TNGA160308 TH10 Tungaloy insert is optimised for non‑ferrous materials such as aluminium and brass, where an uncoated carbide edge supports low cutting forces and a high‑quality surface finish. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO TNGA dimensions; compatibility depends on holder form, relief angle, tolerance class, fastening and thickness, so confirm the holder matches the ISO TNGA seat. Does this insert include a chipbreaker? No, this TNGA160308 insert is supplied without a chipbreaker; chip control should be managed via cutting parameters and the chosen holder geometry. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius offers a balance between edge strength and profile accuracy, improving resistance to edge chipping while maintaining good surface integrity in turning operations. Which clamping features ensure repeatable positioning? The cylindrical hole and the 3.18 mm plate thickness contribute to secure clamping and repeatable positioning when used with the correct clamping set and underlay. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNGA 160402 BX360 Wendeplatten - Tungaloy
The combination of a CBN cutting layer and a robust substrate ensures extended tool life and consistent finishing performance in high‑hardness turning. Its ISO‑compliant form and standard dimensions allow fast indexable insert changes and straightforward holder matching. Order the insert directly via Metav Werkzeuge or consult Metav's specialists for holder compatibility and process optimisation. TNGA160402 BX360 indexable turning insert — CBN grade for hardened steels, Tungaloy TNGA160402 BX360 is an ISO‑format triangular indexable insert designed for precision external and internal turning of hardened components, offering a wear‑resistant CBN grade for demanding finishing operations. ISO triangular insert TNGA form CBN grade BX360 for hardened steels 16 mm inscribed circle, 60° included angle 0.2 mm corner radius, 4.76 mm thickness High‑hardness finishing with consistent results Built around a CBN cutting layer, the insert delivers superior wear resistance and repeatable performance when facing hardened steels. The BX360 grade is tailored for finish and near‑finish turning where edge stability and low flank wear matter; the carbide substrate provides shock resistance and heat conduction to preserve edge integrity. For applications that demand tight tolerances and reliable surface quality, the insert reduces rework and supports predictable tool change intervals, contributing directly to process stability and lower overall machining costs. Designed for process compatibility and quick integration The insert follows ISO geometries so compatibility with standard turning holders is defined by form, clearance angle, tolerance class, clamping method, size and thickness. The ISO conformity expedites tool selection and reduces setup time on production lines. Its triangular shape with a 60° included angle and a 0.2 mm corner radius suits fine finishing passes; the 4.76 mm plate thickness and the cylindrical hole ensure secure clamping and repeatable seating in most clamping systems. Clear information on these dimensions supports reliable fixture pairing and minimises time spent verifying fitment. Practical advantages for shopfloor efficiency Using a CBN‑based insert for hard turning often means fewer passes and improved surface integrity compared with conventional grades. The absence of an integrated chipbreaker facilitates controlled chip flow when combined with appropriate cutting parameters and coolant strategy; operators benefit from simplified edge preparation and predictable cutting forces. As the component life of the grade extends, set‑up frequency and tool inventory needs are reduced — a measurable advantage in batch production and tool cost accounting. For hard turning and finishing tasks, consider the Tungaloy TNGA160402 BX360 insert and contact Metav Werkzeuge for tailored holder recommendations and expedited delivery. Technical Data Article number: 6808080 Manufacturer SKU: TUN6808080 Insert designation: TNGA160402 Grade/coating: BX360 Cutting material: CBN Substrate material: carbide Key Dimensions Inscribed circle: 16 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Hole: with cylindrical hole Applications & Features Application: turning (external and internal) Suitable materials: hardened steels; depending on execution, cast iron Insert shape: triangular Chipbreaker: none ISO‑compliant system for easy holder matching FAQ What materials is this insert suited for? The TNGA160402 BX360 insert is engineered primarily for hardened steels and, depending on the specific workpiece and cutting data, can be used on certain cast iron grades. Which tool holders are compatible with this insert? Compatibility follows ISO standards; match holder form, clearance angle, tolerance class, clamping style, size and thickness to the TNGA160402 BX360 dimensions to ensure proper seating and secure clamping. Does the BX360 grade contain CBN? Yes, the BX360 designation denotes a grade based on CBN cutting material optimised for wear resistance in finishing operations. Is a chipbreaker integrated on this insert? This insert is supplied without a built‑in chipbreaker; chip control is achieved via cutting parameters and the chosen clamping/holder system. What is the manufacturer SKU for ordering? Order using Manufacturer SKU TUN6808080 or article number 6808080 to ensure the correct Tungaloy TNGA160402 BX360 indexable insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNGA 160402 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, the LX10 Tungaloy carbide grade and a precise 0.2 mm corner radius for reliable edge stability and broad material performance in turning operations; order directly via Metav Werkzeuge or consult the team for application-specific advice. TNGA160402 LX10 Tungaloy indexable insert — ISO triangular turning insert, 60° A TNGA160402 LX10 indexable insert designed for external and internal turning in ISO toolholder systems. ISO triangular insert, 60° geometry LX10 Tungaloy carbide grade for wear resistance 0.2 mm corner radius for precise turning Central cylindrical hole for secure clamping Consistent machining from ISO triangular geometry The ISO TNGA form delivers a proven triangular profile that combines rigidity with access to multiple cutting edges. The 60° geometry provides a stable cutting angle that is suitable for a wide range of external and internal turning tasks, while the small 0.2 mm corner radius helps to generate consistent surface finishes on light and medium cuts. In practice, the form is selected to match the workpiece and holder: compatibility with the toolholder is determined by shape, relief angle, tolerance class, fastening method, size and thickness, which ensures predictable performance when fitted to a correctly specified holder. Extended tool life through the LX10 carbide grade The insert is supplied in Tungaloy’s LX10 carbide grade, a material choice optimised for a balance of hardness and toughness. This carbide composition is aimed at improving wear resistance and maintaining edge stability under varied cutting conditions, reducing the frequency of index changes and interruptions in production. For users unfamiliar with grades: LX10 represents a vendor‑defined cutting material selection tuned to general turning applications, offering broad material coverage and reliable performance across steels and common alloys. Secure clamping and straightforward compatibility A central cylindrical hole (with cylindrical fit) simplifies fixture design and ensures reliable seating in compatible clamping systems. Because the insert is ISO‑standardised, holders that accept TNGA‑style plates will accommodate this item provided the holder matches the insert’s dimensions and tolerance class. The insert’s relief angle is 0°, which should be noted when selecting the mating toolholder and approach geometry; correct pairing prevents unintended rubbing and preserves the cutting edge during medium‑duty turning cycles. Production advantages and practical workshop benefits Using a standardised ISO insert such as this reduces tool inventory complexity and facilitates quick changeovers; a triangular insert offers three usable cutting edges, supporting economical use of each plate. The absence of an integrated chipbreaker on this grade allows the choice of chip control to be adapted via machining parameters or by selecting a holder with a matching chip control feature. Overall, the combination of ISO conformity, LX10 material properties and a compact 0.2 mm corner radius supports steady cycle times, repeatable workpiece quality and lower tool management overhead in everyday turning applications. For availability and personalised selection of Tungaloy LX10 carbide inserts, contact Metav Werkzeuge for tailored advice and prompt supply at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6852180 Manufacturer SKU: TUN6852180 Merchant SKU: 6852180-Tungaloy Brand: Tungaloy Model series: ISO indexable turning inserts Core data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Insert angle: 60° Special features Carbide material Carbide grade LX10 Triangular plate shape (TNGA160402) Central cylindrical hole No chipbreaker included Intended use: turning Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The TNGA160402 LX10 insert is supplied in Tungaloy LX10 carbide and is intended for a broad range of turning applications, offering good performance across steels and common alloys. How is the insert clamped in the holder? The plate features a central cylindrical hole for secure clamping; a matching ISO TNGA holder with the correct tolerance class and fastening arrangement is required for proper seating. What does the 0° relief angle mean for setup? A 0° relief angle indicates minimal clearance behind the cutting edge; holders and approach geometry must be selected to avoid rubbing and to maintain the insert’s cutting performance. Is a chipbreaker included on the insert? This TNGA160402 LX10 insert is supplied without an integrated chipbreaker, allowing chip control to be managed by the holder design or by adjusting cutting parameters. Can the insert be used for internal turning as well as external turning? Yes, the ISO triangular geometry and the insert’s dimensions make it suitable for both external and internal turning when paired with an appropriate holder and setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160402 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of standardised compatibility, precise geometry and a robust carbide grade for stable, repeatable turning results; order or enquire via Metav Werkzeuge for application support. TNGA 160402 LX11 TNGA160402 Indexable Turning Insert – Tungaloy, 60° Triangle, 0.2 mm Radius The TNGA160402 LX11 Tungaloy insert is an ISO‑standard triangle indexable insert designed for external and internal turning operations, offering a balanced combination of wear resistance and edge stability. ISO-compliant triangle insert LX11 Carbide grade optimised for turning 0.2 mm nose radius for fine detail Cylindrical hole for secure clamping Precision geometry for consistent finishes and tight tolerances The insert’s 0.2 mm nose radius and 60° included angle provide a geometry that supports fine profiling and finishing tasks. Manufactured from carbide and delivered in the LX11 grade, the component is engineered to maintain a stable cutting edge under typical turning conditions. This combination reduces variation in surface finish and dimensional scatter, contributing to predictable cycle times and higher first‑pass yield. The neutral relief of 0° is compatible with a range of holder designs and can aid in achieving repeatable cutting behaviour when paired with the correct clamping configuration. ISO compatibility and flexible clamping for faster set‑ups Being ISO standard in design and a triangular shape with 16 mm size and 4.76 mm thickness, the insert fits widely used turning holders. The cylindrical hole ensures secure fastening and repeatable position when the correct clamping set is selected. Compatibility to a specific holder depends on form, relief angle, tolerance class, fastening, size and thickness; this standardisation shortens set‑up time and simplifies tool inventory, which supports leaner production flows and quicker changeovers on the shop floor. Grade and application: wear resistance, toughness and edge reliability The LX11 Tungaloy grade complements the insert geometry by balancing wear resistance and toughness, improving edge stability during continuous cutting and moderate interruptions. Supplied without a chipbreaker, this insert is suitable where geometry alone meets the chip control requirements or where the machining strategy uses a separate chip control solution. The material and grade selection support longer effective cutting life and stable performance, which lowers the frequency of insert changes and helps maintain productivity across batch and single‑piece turning tasks. For application guidance or to secure supply of the Tungaloy LX11 TNGA160402 insert, contact Metav Werkzeuge for tailored recommendations and rapid delivery. Technical data Article number: 6814865 Manufacturer SKU: TUN6814865 Model series: ISO turning indexable inserts Material: Carbide Core specifications Insert designation: TNGA160402 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Relief angle: 0° Hole: with cylindrical hole Shape: triangular Special features Grade/coating: LX11 (Tungaloy) Chipbreaker: none Application: turning (external and internal) Compatibility: ISO standard; holder compatibility determined by form, relief angle, tolerance class, fastening, size and thickness System build: ISO insert plus matching outer holder or boring bar, shim/clamp set and replacement screws FAQ What is the primary use of this insert? The TNGA160402 LX11 Tungaloy indexable turning insert is intended for external and internal turning, providing a balance of wear resistance and edge stability for consistent machining results. Which holder features are required for secure mounting? Holder compatibility for the TNGA160402 LX11 insert is defined by form, relief angle, tolerance class, fastening method, size and thickness; the cylindrical hole and triangular form provide secure clamping when matched to an ISO‑compliant holder. What are the key geometry specifications to consider? Key specifications for the TNGA160402 LX11 Tungaloy insert: 0.2 mm corner radius, 16 mm size, 4.76 mm thickness, 60° included angle and 0° relief angle. Does this insert include a chipbreaker? The TNGA160402 LX11 insert is supplied without a chipbreaker; chip control should be selected separately according to workpiece material and cutting strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160404 BX360 Wendeplatten - Tungaloy
Take advantage of the BX360 grade and cubic boron nitride (CBN) substrate for consistent finish and extended wear resistance on hardened components; the combination of a 0.4 mm corner radius and ISO geometry ensures reliable seating and repeatable results—order the TNGA160404 insert directly via Metav Werkzeuge or consult our specialists for application advice. TNGA160404 BX360 indexable insert for Turning — Tungaloy TNGA160404 BX360 offers a CBN-based cutting solution for fine finishing of hardened components in turning operations CBN grade BX360 for hard finishing 60° triangular geometry for versatility 0.4 mm corner radius for fine turning ISO-compatible form and secure clamping High-performance finishing for hardened steels The BX360 grade is a cubic boron nitride (CBN) cutting material engineered for high-hardness applications, providing outstanding abrasion resistance and edge stability in finishing passes. In practice this means consistent surface quality and predictable wear behaviour when machining hardened steels and, depending on variant, certain grades of cast iron. The insert’s wear-resistant composition reduces frequency of index changes and supports tight tolerances during final passes. Precision geometry for reliable seating and stability The triangular plate with a 60° included angle and a 0.4 mm corner radius combines rigidity with controlled engagement for finishing cuts. The 0° clearance geometry suits applications where accurate depth control and stable chip formation are required. Compatibility with holders is determined by form, clearance angle, tolerance class, fixing method, size and thickness; the ISO-standard layout simplifies selection of the appropriate external holder or boring bar for dependable clamping and repeatable tool offsets. Integration into production for efficient, predictable results Manufactured as an ISO-format indexable insert on a carbide substrate, the component is supplied with a cylindrical hole for secure retention and is specified without a chipbreaker to favour smooth finishing operations. This configuration supports long, uninterrupted cycles in serial production while maintaining surface integrity. For operations prioritising end-quality and process stability, the TNGA160404 BX360 insert delivers a balance of tool life and finish consistency that is easy to implement into existing toolholders. For application support or to request stock availability of the TNGA160404 BX360 insert, contact Metav Werkzeuge quoting SKU TUN6808091 via info@metav-werkzeuge.com or call +49 2822 7131930 for immediate technical consultation Technical data Article number: 6808091 Manufacturer SKU: TUN6808091 Model series: ISO turning indexable inserts Material: carbide Brand: Tungaloy Facts Corner radius: 0.4 mm Included angle: 60° Plate thickness: 4.76 mm Plate size: 16 mm Clearance angle: 0° Manufacturer article number: 6808091 Special features Grade: BX360 Cutting material: cubic boron nitride (CBN) Shape: triangular Hole style: cylindrical hole (with hole) Chipbreaker: without Application: Turning ISO designation: TNGA160404 FAQ Is this insert suitable for finishing hardened steels? The TNGA160404 BX360 insert uses a CBN-based grade optimised for hardened steels, making it suitable for wear-intensive finishing operations that require consistent surface quality. Can the insert be used in standard ISO toolholders? Yes, the insert follows ISO geometry; compatibility is confirmed by matching form, clearance angle, tolerance class, fixing method, size and thickness to the chosen holder. Does the insert include a chipbreaker? This variant is supplied without a chipbreaker, which benefits smooth finishing passes where minimal edge disturbance is desired. What clamping method does the plate use? The plate features a cylindrical hole for secure retention and is intended for use with matching insert seats, clamping sets and fastening screws. Which materials beyond hardened steel can be machined with this grade? Depending on the specific tool execution, the BX360 grade can also be applied to certain cast iron types; selection should follow component material and processing stability requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160404 DX140 Wendeplatten - Tungaloy
Benefit from the combination of high cutting speed, extended tool life and ISO compatibility offered by the DX140 PCD grade; order directly via Metav Werkzeuge or consult technical advisors for process integration. TNGA 160404 DX140 TNGA160404 turning insert by Tungaloy — PCD grade for turning A TNGA160404 DX140 indexable turning insert designed for high-speed external and internal turning of aluminium, non-ferrous metals and abrasive non-metallic materials. TNGA geometry ISO 160404 compatible PCD grade DX140 for high-speed machining Long tool life and abrasion resistance Triangle insert, 60° with cylindrical hole High cutting performance and predictable economy The diamond cutting layer of PCD in the DX140 grade delivers significantly improved wear resistance and consistent edge integrity in the machining of aluminium and other non-ferrous materials. This enables substantially higher cutting speeds compared with conventional coatings, which shortens cycle times and reduces per-part tooling costs. For operations involving abrasive non-metals, the PCD edge maintains form and surface finish far longer than uncoated alternatives, supporting predictable machining windows and fewer tool changes. Geometry and compatibility that simplify setup The insert follows the ISO 160404 format and a TNGA geometry, with a 60° triangle form and a corner radius of 0.4 mm. The relief angle is 0°, and the plate thickness is 4.76 mm, with a central cylindrical hole for secure clamping. These attributes make the insert compatible with standard ISO holders when matched by form, tolerance class, screw size and seating. Because the grade is supplied without a dedicated chipbreaker, pairing with the correct holder and external chip control measures is advised to achieve consistent chip formation and stable cutting. Substrate, surface quality and process benefits A robust cemented carbide substrate supports the PCD cutting layer, combining toughness with the abrasion resistance of diamond for extended tool life. The result is improved surface finishes and reduced burr formation on machined non-ferrous parts, which lowers downstream rework. Stable chip formation and reduced vibration contribute to repeatable dimensional results and less machine downtime. Selecting DX140 for medium to high stability setups yields especially good productivity gains; in less rigid conditions, slower feeds or adapted clamping are recommended to preserve edge life. Contact Metav Werkzeuge for application advice and availability of the Tungaloy TNGA160404 DX140 indexable insert — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6808089 Manufacturer SKU: TUN6808089 Our SKU: 6808089-Tungaloy Brand: Tungaloy Product name: TNGA160404 DX140 Tungaloy indexable insert Facts ISO designation: 160404 Shape: triangle, 60° Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Hole: cylindrical (with hole) Special features Cutting material: polykristalliner Diamant (PCD) Grade: DX140 Substrate: cemented carbide Model series: ISO turning indexable inserts Application: turning (external and internal) Chipbreaker: none FAQ What materials is this insert optimised for? The TNGA160404 DX140 indexable insert is optimised for aluminium, other non-ferrous metals and abrasive non-metallic materials thanks to its PCD cutting layer. How does the DX140 grade affect productivity? The DX140 grade provides high wear resistance and enables higher cutting speeds, which improves cycle times and reduces tooling changes for many non-ferrous turning tasks. Is a specific holder required for this insert? Compatibility depends on holder form, relief angle, tolerance class and fastening; the TNGA160404 format fits ISO holders that match the TNGA geometry and central clamping arrangement. Does the insert include a chipbreaker? This grade is supplied without a chipbreaker; chip control should be achieved via holder design or external measures to ensure stable chip evacuation. What is the Manufacturer article number and SKU? Manufacturer article number 6808089 and manufacturer SKU TUN6808089 identify the Tungaloy TNGA160404 DX140 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160404 DX160 Wendeplatten - Tungaloy
Take advantage of the combination of polycrystalline diamond (PCD) cutting performance and a compact ISO triangular geometry for fast, repeatable aluminium turning; the DX160 grade delivers high cutting speeds and extended tool life. Order directly via Metav Werkzeuge or ask the consultants for application support. TNGA 160404 DX160 turning insert by Tungaloy — PCD grade, 60° triangular geometry A robust indexable turning insert, TNGA160404 DX160, designed for external and internal turning of aluminium, non-ferrous alloys and abrasive non-metals. PCD grade DX160 for high cutting speeds Triangular 60° geometry for stable turning 0.4 mm corner radius for fine finishes Cylindrical hole for secure clamping Faster production with PCD: productivity where it matters The DX160 polycrystalline diamond grade is engineered for high cutting speeds and long service intervals when machining aluminium and other non-ferrous materials. PCD provides an exceptionally hard cutting edge that resists abrasive wear, meaning longer tool life and fewer insert changes. For shops aiming to shorten cycle times and increase output, the combination of a diamond cutting layer on a carbide backing reduces downtime and keeps spindle utilisation high while maintaining consistent surface quality. Geometry for process stability and surface quality The triangular 60° configuration and 0.4 mm corner radius give a predictable engagement for turning operations, promoting steady cutting forces and improved surface finish. The insert’s 60° included angle is well suited to general-purpose external and internal turning, and the cylindrical hole enables secure, repeatable clamping in standard ISO holders—compatibility is defined by form, relief angle, tolerance class, fastening method, size and thickness. This predictable geometry aids in achieving consistent results across batches, especially when tool change repeatability matters. System-level benefits and easy integration As part of an ISO insert system, the TNGA family integrates with matching external holders or boring bars, plus supporting clamping elements and replacement screws. The plate thickness of 4.76 mm and 16 mm size give robust support under cutting loads, while the carbide backing ensures reliable resistance to mechanical stresses. Selecting the DX160 grade for abrasive or high-speed applications reduces rework and supports steady production—one practical way to raise throughput without changing machine configuration. Contact Metav Werkzeuge for application recommendations or to specify TNGA160404 in DX160 PCD for high-speed aluminium turning — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and order support Technical data Article number: 6808090-Tungaloy Manufacturer SKU: TUN6808090 Manufacturer item no.: 6808090 Designation: TNGA160404 DX160 Core specifications Cutting angle: 60° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 16 mm Relief angle: 0° Special features Grade/coating: DX160 Cutting material: polycrystalline diamond (PCD) Substrate material: cemented carbide Plate shape: triangular Hole style: cylindrical hole Chipbreaker: without Typical application: turning (external and internal) Model series: ISO turning indexable inserts FAQ What materials is this insert best suited for? The TNGA160404 DX160 insert is optimised for aluminium, non-ferrous alloys and abrasive non-metals; the DX160 PCD grade provides wear resistance and high cutting-speed capability. Is the insert compatible with standard ISO turning holders? Compatibility is assured by matching the insert form, relief angle (0°), tolerance class, fastening method, size (16 mm) and thickness (4.76 mm) to the holder; the cylindrical hole supports secure clamping in ISO systems. Does this insert have a chipbreaker? This triangular TNGA insert is supplied without a chipbreaker; chip control must be managed by selecting appropriate grade, geometry and cutting parameters for the material in use. What benefits does the PCD cutting layer offer compared with carbide grades? The PCD layer in the DX160 grade offers superior resistance to abrasive wear and enables higher cutting speeds on non-ferrous materials, resulting in longer tool life and fewer insert changes during production. Which SKU should be quoted when ordering? Quote the manufacturer SKU TUN6808090 or the supplier article number 6808090-Tungaloy when specifying the TNGA160404 DX160 insert to ensure correct delivery. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160404 GH110 Wendeplatten - Tungaloy
Take advantage of a balanced combination of GH110 wear resistance, a precise 0.4 mm nose radius and ISO conformity to maintain stable turning processes; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNGA160404 GH110 Tungaloy — ISO turning indexable insert, triangular, 0.4 mm radius The TNGA160404 GH110 is an ISO‑standard triangular indexable insert designed for general external and internal turning applications where a combination of edge stability and wear resistance is required. TNGA160404 triangular ISO turning insert GH110 Tungaloy carbide grade 0.4 mm nose radius for fine profiling Cylindrical hole for secure clamping Balanced carbide grade for predictable tool life The GH110 Tungaloy grade combines wear resistance, toughness and edge stability, making it suitable for a broad range of turning tasks. In production environments where repeatability and reduced downtime matter, this grade supports longer tool life and consistent component quality. The insert’s composition is optimised so that abrasive wear is limited while the cutting edge remains robust under interrupted cuts. As a result, machining cycles can be planned with greater confidence and tool change intervals can be extended, reducing overall tooling costs. Geometry and clamping tailored for stable machining The triangular ISO 160404 geometry with a 0.4 mm nose radius and a plate thickness of 4.76 mm provides a rigid cutting edge and stable seating in standard triangular holders. The insert is supplied with a cylindrical hole to allow secure clamping using conventional top clamps or screw systems; compatibility with a specific holder is therefore determined by form, clearance angle, tolerance class, fastening method, size and thickness. The 0° clearance angle and the 60° corner geometry produce reproducible cutting conditions, which is particularly important when replacing inserts during series production. Application flexibility and selection advice for turning Designed primarily for turning, the insert is delivered without a chipbreaker, so the chip control strategy should be selected according to workpiece material and cutting parameters. For conventional external and internal turning tasks, pairing the insert’s carbide grade with an appropriate chipformer will improve surface finish and swarf control. The ISO‑standard designation ensures straightforward substitution in existing tool programmes; when choosing cutting data, the grade’s balance of toughness and wear resistance allows conservative starting parameters to be increased as process stability is verified. Practical integration into workshop workflows The insert is part of an ISO‑based system consisting of the indexable insert, a matching external holder or boring bar, underplate/clamping set and spare screws. This modular approach simplifies inventory management and reduces machine downtime during replacements. The TNGA160404 designation and the manufacturer SKU facilitate rapid ordering and stock control. In addition, the Tungaloy grade’s characteristics support predictable tool performance, which contributes to improved first‑pass yield and less rework in daily production. For reliable turning performance with Tungaloy’s GH110 grade and the TNGA160404 geometry, contact Metav Werkzeuge for availability and tailored application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6808082 Manufacturer SKU: TUN6808082 Model series: ISO turning indexable inserts Insert designation: TNGA160404 GH110 Tungaloy Facts Nose radius: 0.4 mm Thickness: 4.76 mm Inscribed circle / size: 16 mm Clearance angle: 0° Corner angle: 60° Hole: cylindrical hole (with hole) Special features Material: carbide Grade: GH110 (Tungaloy) ISO designation: 160404 Plate form: triangular Supplied without chipbreaker Intended use: turning (external and internal) FAQ What materials is this insert intended for? The TNGA160404 GH110 Tungaloy insert is intended for general turning applications; the GH110 grade offers a balance of wear resistance and toughness suited to a wide range of workpiece materials when paired with an appropriate chipformer. How is holder compatibility determined? Compatibility is determined by the insert’s form, clearance angle (0°), tolerance class, fastening method, size (16 mm) and thickness (4.76 mm); matching the holder to these dimensions ensures secure clamping and repeatable cutting. Does the insert include a chipbreaker? This indexable insert is supplied without a chipbreaker, so a suitable chip control geometry should be selected according to the machining task and workpiece material. Which identifiers should be used to reorder the same item? Order using article number 6808082 or the manufacturer SKU TUN6808082 to ensure the correct TNGA160404 GH110 indexable insert is supplied. What are the key geometry specifications for programming and setup? Key values: nose radius 0.4 mm, thickness 4.76 mm, ISO code 160404, triangular shape and a cylindrical hole for clamping; use these when verifying tool offsets and setup data. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com