TNGA 160404 LX10 Wendeplatten - Tungaloy
Combines LX10 wear resistance, a 60° triangular cutting geometry and a secure cylindrical clamping hole for dependable turning. Order the TNGA 160404 LX10 insert directly via Metav Werkzeuge or consult our advisors for selection support. TNGA 160404 LX10 Tungaloy turning insert – ISO triangular 60° geometry TNGA 160404 LX10 is an ISO‑standard indexable insert intended for turning applications, offering a balance of wear resistance and edge stability for industrial machining. ISO‑standard triangular insert LX10 grade for wear resistance 60° cutting geometry for turning Cylindrical hole for secure clamping Consistent cutting performance through grade and substrate The LX10 grade, combined with a carbide substrate, delivers a targeted balance between wear resistance and toughness, which supports longer tool life under varied cutting conditions. In practical terms, this means fewer insert changes and more predictable production cycles when machining steels and common alloys. The design is particularly suitable for repetitive external and internal turning operations that require a stable cutting edge and resistance to abrasive wear. The choice of this turning grade reduces unexpected downtime by improving edge retention. Secure clamping and ISO compatibility for reliable operation Built to the ISO 160404 form, the triangular insert features a cylindrical hole and is compatible with holders that match form, relief angle, tolerance class, fastening method, size and thickness. The central hole ensures positive positioning and repeatable clamping torque, reducing the risk of movement under load. A 0° relief angle is specified for this geometry; in practice this aids axial stability and is commonly paired with suitable holder clearances. Specifying the correct holder and clamping hardware ensures safe, vibration‑resistant performance during heavy or interrupted cuts. Geometry choices that optimise surface finish and cycle time A 60° cutting geometry with a 0.4 mm corner radius offers a compromise between strength and finish: the acute angle supports fine profile accuracy, while the corner radius increases resistance to chipping. For finishing passes where surface quality matters, this geometry helps achieve consistent results without aggressive cutting parameters. Conversely, slightly heavier stock removal is possible by selecting compatible holders and optimised feeds, improving efficiency. When selecting the insert, match the geometry and grade to the workpiece material and machining stability to achieve the best trade‑off between cycle time and component quality. For reliable high‑volume turning with Tungaloy LX10, contact Metav Werkzeuge for personalised application advice and rapid supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852181 Manufacturer SKU: TUN6852181 Dealer SKU: 6852181-Tungaloy Series: ISO‑Drehwendeschneidplatten Dimensions and numbers ISO designation: 160404 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Relief angle: 0° Hole: with cylindrical hole Features and materials Material: carbide Grade/coating: LX10 (Tungaloy) Insert shape: triangular Intended use: turning (external and internal) Clamping: cylindrical‑hole retention Compatibility factors: form, relief angle, tolerance class, fastening, size, thickness FAQ What applications is this insert best suited for? The TNGA 160404 LX10 indexable insert is designed for general turning, including both external and internal operations where a balance of wear resistance and edge stability is required. How does the LX10 grade affect tool life? The LX10 grade from Tungaloy provides enhanced wear resistance on a carbide substrate, which extends insert life under standard turning conditions and leads to more predictable maintenance intervals. Is the insert compatible with all triangular holders? Compatibility depends on matching the insert form ISO 160404, relief angle, tolerance class, fastening type, size and thickness to the holder; the cylindrical hole supports secure clamping when the holder is specified accordingly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160404 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of balanced wear resistance, stable cutting-edge performance and straightforward holder compatibility to keep turning operations productive and predictable. Order the insert directly via Metav Werkzeuge or consult our specialists for matching holders and clamping sets. TNGA 160404 LX11 Tungaloy turning insert — triangular ISO insert for turning, 60° The TNGA160404 LX11 is an ISO-standard triangular turning insert by Tungaloy, designed for general external and internal turning where a balance of wear resistance and edge stability is required. TNGA160404 ISO triangular insert, 60° LX11 Tungaloy carbide grade for balanced wear resistance 0.4 mm nose radius for consistent edge engagement Cylindrical hole and 4.76 mm thickness for secure clamping Consistent cutting performance for productive turning The triangular geometry and the LX11 carbide grade deliver a controlled compromise between wear resistance and toughness, which helps to maintain cutting-edge integrity under varying cutting conditions. In practice, this means fewer unscheduled index changes and more consistent component tolerances—an outcome particularly valuable for batch production and mixed-series work. The insert’s design supports both external and internal turning tasks and is especially suitable where predictable tool life contributes directly to process stability. Clear compatibility and secure clamping reduce setup risk Compatibility with toolholders is determined by form, relief angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole, a 4.76 mm plate thickness and a 60° vertex angle, all of which aid secure clamping and correct seat alignment in standard ISO holders. A 0.4 mm nose radius provides reliable edge engagement while helping to control cutting forces and surface finish; the absence of an integrated chipbreaker means chip control must be matched to material and cutting parameters at the holder or process level. Practical selection guidance for reliable parts quality Select the LX11 grade where a balanced combination of edge stability and longevity is required; the grade complements insert geometry to suit wear-prone and interrupted cuts alike. For cast components, alloyed steels or general steel workpieces, choose a holder geometry and clamping set that match the insert’s form and tolerance to avoid positional deviation. Where higher toughness or specialised coatings are needed, consider alternative grades or coated variants to extend tool life under high thermal or abrasive loads. Contact Metav Werkzeuge for application-specific recommendations on the LX11 grade and to arrange matching holders or clamping sets; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808083 SKU: 6808083-Tungaloy Manufacturer SKU: TUN6808083 Model series: ISO turning inserts Material: carbide Designation: TNGA160404 LX11 Tungaloy turning insert Numbers / core technical data Insert size: 16 mm Plate thickness: 4.76 mm Nose radius: 0.4 mm Included angle: 60° Hole: cylindrical Designs / special features Grade: LX11 (Tungaloy) Geometry: triangular ISO plate Application: turning (external and internal) Chipbreaker: none Compatibility: ISO-standard holders (form, relief angle, tolerance, fastening, size, thickness) System components: insert, compatible external holder or boring bar, clamping/washer set and replacement screw FAQ What materials can this insert machine? The TNGA160404 LX11 Tungaloy turning insert is intended for general turning and offers a balanced performance on a wide range of steels and common alloyed materials; suitability depends on the selected holder and cutting data. How does the LX11 grade affect tool life? The LX11 grade combines wear resistance and toughness to provide stable cutting edges and predictable tool life under standard turning conditions, reducing the frequency of indexing and regrinding. Is there a chipbreaker on this insert? This insert is supplied without a chipbreaker; chip control should be managed through holder selection, cutting parameters and process setup. Which holder features must be matched to the insert? Holder form, relief (clearance) angle, tolerance class, fastening method, size and thickness determine compatibility and clamping reliability for this ISO triangular insert. Can this insert be used for internal turning? Yes, the geometry supports both external and internal turning operations when paired with a suitable boring bar or holder designed for the insert size and clamping style. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160404 LX21 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, robust Tungaloy LX21 carbide grade and a precise 0.4 mm corner radius to maintain consistent turning performance and predictable tool life; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNGA160404 LX21 indexable turning insert — triangular 60° geometry, carbide grade by Tungaloy TNGA160404 LX21 is a triangular ISO indexable turning insert designed for general external and internal turning applications and compatible with standard ISO‑form holders Triangle 60° geometry for versatile turning LX21 Tungaloy grade: wear-resistant carbide 0.4 mm corner radius for defined edge Cylindrical hole, standard thickness 4.76 mm Consistent cutting geometry for repeatable results The ISO designation and triangular 60° form deliver a reliable cutting interface that supports repeatable set‑ups and predictable part dimensions. As an indexable insert, the component provides three usable edges per insert, reducing tool change frequency and supporting continuous production. The 60° point angle is versatile for both profile and straight turning, while the 0.4 mm corner radius gives a defined edge that balances cutting strength and surface finish. These geometric characteristics simplify tool selection and contribute to process stability on the shop floor. Material technology aimed at extended tool life The LX21 Tungaloy grade combines wear resistance and edge stability, optimised for a broad range of turning tasks. Manufactured in carbide, the grade is selected to maintain cutting edge integrity under moderate to demanding conditions, helping to reduce flank wear and maintain surface quality over longer tool life. This technical combination allows higher cumulative machining time between changes, which supports higher overall productivity and lower tool handling effort in batch and continuous operations. Secure mounting and practical holder compatibility The insert features a cylindrical hole and a standard plate thickness of 4.76 mm, designed for stable clamping in compatible holders. Compatibility with the chosen holder depends on form, clearance angle, tolerance class, fastening method, size and thickness; verifying these parameters ensures correct seating and reliable clamping. The insert’s geometry and hole style support straightforward indexing and replacement, while the 0° clearance angle specification aids in selecting suitable insert seats and negative‑rake holder designs for stable cutting conditions. Clear guidance for application and selection This insert is intended for turning operations where a plain geometry without an integrated chipbreaker is acceptable; select a chip control solution or matching holder if chip formation requires management. For external and internal turning, pair the insert’s LX21 grade with appropriate feeds and speeds to exploit its wear resistance and edge stability. When machining different workpiece materials, choose cutting parameters and coolant strategies that match the carbide grade and the insert’s geometry to achieve the required surface quality and productivity. For tailored advice on integrating the TNGA160404 LX21 Tungaloy indexable insert into production workflows, or to place an order, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application support and supply details. Technical data Article number: 6808084 Manufacturer SKU: TUN6808084 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Insert designation: TNGA160404 LX21 Data Geometry: triangular, 60° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 16 ISO code: 160404 Special features Material: carbide Grade/coating: LX21 (Tungaloy) Hole: with cylindrical hole Chipbreaker: without Intended use: turning Compatible system: ISO indexable insert system FAQ What materials is this insert suitable for? The TNGA160404 LX21 insert in carbide is designed for a broad range of turning tasks; suitability for specific materials should be checked against the LX21 grade recommendations and cutting parameters. Does this insert include a chipbreaker? No, the insert is supplied without an integrated chipbreaker; chip control must be addressed by selecting appropriate cutting conditions or matching holders. How is compatibility with the toolholder ensured? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; confirm holder specifications match the TNGA160404 geometry before use. How many cutting edges are available per insert? The triangular form provides up to three indexable cutting edges, enabling economical edge rotation and straightforward replacement. Which brand and SKU identify this product? This item is a Tungaloy indexable turning insert, SKU 6808084‑Tungaloy, manufacturer SKU TUN6808084, listed as TNGA160404 LX21. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160404 NS520 Wendeplatten - Tungaloy
Take advantage of a cermet grade engineered for consistent surface finish and dimensional accuracy combined with a compact triangular geometry that simplifies tool inventory. The combination of NS520 performance, a 0.4 mm corner radius and ISO compatibility ensures productive finishing operations; order directly via Metav Werkzeuge or consult our specialists for application support. TNGA 160404 NS520 Tungaloy turning insert — ISO triangular insert, 60° geometry The TNGA160404 NS520 Tungaloy insert is an ISO-standard triangular indexable insert designed for turning, optimised for finishing and light machining of steel with a focus on surface quality and steady wear behaviour ISO-standard triangular insert, 60° geometry Cermet grade NS520 for fine finishing 0.4 mm corner radius for tight tolerances Compatible with external holders and boring bars Predictable finishing with a cermet grade built for surface quality The NS520 grade is a cermet or coated cermet formulation developed for finishing to light machining of steel, emphasising surface finish and dimensional accuracy. Compared with general-purpose carbide grades, a cermet cutting edge produces finer surface structure and promotes even wear, which reduces rework and inspection cycles. The triangular insert’s 60° included angle and 0° relief help maintain a stable cutting geometry during small-depth finishing passes. For shops prioritising reproducible part quality, this insert delivers repeatable results while lowering the frequency of insert changes. System compatibility and straightforward integration on CNC lathes Compatibility with a toolholder depends on several defined parameters: shape, relief angle, tolerance class, fastening method, size and thickness. The ISO designation and the triangular form make the insert compatible with a wide range of external holders and boring bars when the holder matches the 16 mm size and 4.76 mm thickness. The insert is supplied with a cylindrical centre hole, enabling secure clamping in standard pockets; a matching underlay or clamp set and replacement screws complete the system. Integrators benefit from clear interchangeability: select a holder and clamping kit that correspond to the ISO geometry to ensure safe and accurate seating. Practical shop-floor advantages: precision, economy and handling A 0.4 mm corner radius is effective for tight tolerances and fine finishes without compromising edge life, which supports longer uninterrupted production runs and lower tooling spend per part. The absence of an integral chipbreaker means chip control must be matched to the workpiece and cutting conditions — choosing the correct chip-control geometry and process parameters reduces cycle time and scrap. The insert’s carbide substrate provides the mechanical support needed for finishing passes while the NS520 surface characteristics help maintain a stable cutting edge. For small-batch and high-precision turning, this combination offers a balance of productivity and process security. For precision finishing in steel, contact Metav Werkzeuge for availability and application advice on the Tungaloy TNGA160404 NS520 insert (info@metav-werkzeuge.com / +49 2822 7131930) Technical Data Article number: 6808085 Manufacturer SKU: TUN6808085 SKU: 6808085-Tungaloy Designation: TNGA160404 NS520 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Material: carbide Facts ISO code: 160404 Insert size: 16 Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Hole: with hole (cylindrical hole) Grade/coating: NS520 Special features Triangular plate form Cermet or coated cermet cutting material No chipbreaker (ohne) Application: turning (Drehen) Typical system: insert + external holder or boring bar + underlay/clamp set + replacement screws Optimised for finishing to light machining of steel, with focus on surface quality and dimensional stability FAQ What materials is the TNGA160404 NS520 best suited for? The TNGA160404 NS520 insert is optimised for finishing and light machining of steel; the NS520 cermet grade emphasises surface quality and steady wear when turning steel components. How is compatibility with toolholders determined? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; ensure the holder matches the 16 mm size, 4.76 mm thickness and ISO triangular geometry of the insert. Does the insert include a chipbreaker? This variant is supplied without an integrated chipbreaker (ohne); chip control should be achieved through holder geometry, cutting parameters or an alternative chip-control insert design. Can the insert be used for heavy roughing operations? The TNGA160404 NS520 is intended for finishing to light machining rather than heavy roughing; for heavy cuts a grade and geometry designed for higher forces and chip evacuation should be selected. What advantages does the NS520 grade provide on the shop floor? NS520’s cermet characteristics deliver improved surface finish and uniform wear, which supports consistent part accuracy and fewer insert changes during finishing cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160404 TH03 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp-edge TH03 grade, a precise 0.4 mm radius and ISO conformity for reliable turning results; order the TNGA160404 TH03 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNGA160404 TH03 ISO turning insert TNGA for turning, triangular, 0.4 mm radius — Tungaloy A TNGA160404 TH03 indexable insert engineered for ISO-compliant external and internal turning applications, offering a sharp cutting edge and optimised chip formation where low cutting forces are required. ISO triangular insert, 16 mm, 0.4 mm radius Sharp-edge TH03 grade for low cutting forces Cylindrical hole for secure clamping Improved machining efficiency with a sharp-edge grade The triangular indexable insert is designed to combine precision with low cutting forces. The TH03 uncoated carbide grade features a sharp cutting edge that reduces power draw and promotes consistent chip formation, which supports stable machining and fewer interruptions. As an ISO-specification component, the geometry and 0° rake angle target situations where reduced cutting resistance and predictable material removal are priorities, helping to shorten cycle times and improve process reliability. Secure mounting and straightforward holder compatibility Compatibility with clamping systems follows ISO norms and is determined by form, free angle, tolerance class, fastening, size and thickness. The insert’s cylindrical hole and standardised triangular form make it suitable for a wide range of ISO holders and boring bars; precise selection of the matching holder ensures secure clamping, repeatable indexing and straightforward replacement. For workshop planning, note the plate thickness and dimensions when matching toolholders to avoid clearance or stability issues. Durable carbide construction and practical application guidance Made from uncoated carbide, the insert offers consistent cutting-edge performance where sharp contact is needed rather than a coated finish. The moderate 0.4 mm corner radius balances edge strength and profile accuracy, making the geometry useful for finishing or light to medium turning passes where surface quality matters. Select an appropriate chipbreaker and grade according to workpiece stability and intended cut depth; the absence of an integrated chipbreaker here means the choice of cutting parameters and holder rigidity will directly influence chip control and surface finish. For precision turning with the sharp TH03 grade, contact Metav Werkzeuge to purchase genuine Tungaloy TNGA160404 inserts or request tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6808087 SKU: 6808087-Tungaloy Manufacturer SKU: TUN6808087 Name: TNGA160404 TH03 Tungaloy insert Facts Corner radius: 0.4 mm Plate size: 16 mm Plate thickness: 4.76 mm Rake angle: 0° Included angle: 60° Special features ISO designation: TNGA160404 Grade/coating: TH03, uncoated carbide Plate shape: triangular Hole: with cylindrical hole Chipbreaker: none Application: turning System components: ISO insert, matching external holder or drill bar, shim/clamping set and replacement screws FAQ What materials is this insert designed for? The insert in grade TH03 is intended for turning tasks where low cutting forces and good chip formation are required; the TNGA160404 performs well in applications favouring a sharp cutting edge rather than coated wear resistance. How is the insert fixed to the toolholder? The TNGA insert uses a cylindrical hole and ISO-compliant geometry for secure mounting; compatibility is determined by form, free angle, tolerance class, fastening, size and thickness. What cutting edge radius is available and what does it mean for finish? This triangular insert has a 0.4 mm corner radius, which provides a balance between edge strength and surface quality, suitable for finishing and light to medium turning passes. Does the insert include a chipbreaker? The supplied specification indicates no integrated chipbreaker; chip control should therefore be achieved by selecting appropriate cutting parameters, holder rigidity and possibly an external chip control solution. Which item codes identify this product for ordering? Order using Manufacturer article number 6808087, SKU 6808087-Tungaloy or Manufacturer SKU TUN6808087 for the TNGA160404 TH03 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160404 TH10 Wendeplatten - Tungaloy
Benefit from the combination of a TH10 uncoated carbide cutting edge, a 0.4 mm corner radius and ISO-standard geometry for reduced cutting forces and consistently clean surfaces; order the TNGA160404 indexable insert directly via Metav Werkzeuge or consult our advisers for application support. TNGA 160404 TH10 Turning indexable insert by Tungaloy — ISO triangular 60° geometry TNGA160404 TH10 is an ISO‑standard triangular indexable insert for general turning applications, designed for clean finishes on non‑ferrous materials and sensitive operations. ISO TNGA160404 triangular insert, 60° geometry TH10 uncoated carbide grade for clean finishes 0.4 mm corner radius for precision turning Compatible with ISO toolholders, with cylindrical hole Consistent cutting performance for turning operations The triangular ISO geometry with a 60° included angle and a 0° relief produces predictable engagement angles and stable cutting conditions in both external and internal turning. The sharp TH10 uncoated grade is formulated to deliver low cutting forces and a clean machined surface when working with non‑ferrous materials and delicate components. The modest 0.4 mm corner radius balances edge strength with the ability to produce fine profiles and controlled chip formation, resulting in fewer secondary operations and improved cycle times. Material and grade: why uncoated carbide is the right choice here An uncoated carbide substrate provides a keen cutting edge beneficial where surface quality is paramount and where built‑up edge must be avoided. The TH10 grade supports operations that require a fresh, sharp cutting face rather than a coated, wear‑resistant surface — particularly advantageous for aluminium alloys, brass and other non‑ferrous materials. Using this grade reduces the tendency for material smearing and helps achieve consistent surface finishes, which can lead to less rework and higher first‑pass yield. Practical compatibility and toolholder considerations The insert is supplied in the ISO form TNGA160404 and its fit to the holder depends on geometry, relief angle, tolerance class, clamping method, size and thickness. The triangular form, inscribed circle 16 mm, plate thickness 4.76 mm and the cylindrical hole allow secure clamping in standard ISO turning holders. As there is no chipbreaker, the insert is most effective when combined with suitable cutting parameters and coolant strategies for the selected material. Selecting the correct holder and clamping kit ensures repeatable positioning and maximised insert life. Productivity benefits and workshop integration Adopting this insert in production setups emphasises reliable, repeatable machining rather than extreme tool life claims. The ISO form and standard hole style simplify inventory management and changeover, while the grade’s tendency for lower cutting forces can allow higher feed or reduced cutting power in some setups. The net result is a balance between finish quality and operational efficiency that supports stable process planning and predictable cycle times. For reliable turning results with Tungaloy’s TH10 uncoated grade, contact Metav Werkzeuge for ordering and technical advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6808088 Manufacturer SKU: TUN6808088 SKU: 6808088-Tungaloy Name: TNGA160404 TH10 Tungaloy indexable insert Model series: ISO-Drehwendeschneidplatten Core specifications Geometry: 60° Corner radius: 0.4 mm Relief angle: 0° Plate thickness: 4.76 mm Plate size: 16 mm Hole: with hole (cylindrical) Materials & features Material: carbide Grade/coating: TH10 uncoated Plate shape: triangular Chipbreaker: none Application: turning FAQ What materials is the TNGA160404 TH10 best suited for? The TNGA160404 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass; the uncoated TH10 grade promotes low cutting forces and clean surface finishes. Is the insert compatible with standard ISO turning holders? Yes, the TNGA160404 conforms to ISO geometry and fits holders that accept triangular inserts with a 16 mm inscribed circle and a cylindrical locating hole. Does this insert include a chipbreaker? No, the insert is supplied without a chipbreaker; process settings should be adapted to the material and machining strategy to control chips effectively. What are the dimensional key values for setup? Key values: corner radius 0.4 mm, plate thickness 4.76 mm, plate size 16 mm, and a 60° geometry with 0° relief angle. Which SKU identifies this product for ordering? Order using SKU 6808088-Tungaloy or manufacturer SKU TUN6808088 for the TNGA160404 TH10 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160408 BX360 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, multidirectional compatibility and precise geometry to keep finishing processes consistent and reduce tool changeovers; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNGA 160408 BX360 Tungaloy turning insert – CBN grade for hardened steels, triangular 60° geometry The TNGA160408 BX360 is a triangular indexable insert designed for turning operations in a multidirectional system, optimised for finishing and high-hardness applications. CBN grade BX360 for hardened steels Triangular insert, 60° geometry, 0.8 mm radius AddMultiTurn system compatibility Suitable for longitudinal, facing and profile turning Reliable finish on hardened components with CBN performance The combination of cubic boron nitride (CBN) in grade BX360 and a carbide substrate delivers a consistent finish and extended wear life when machining hardened steels. As a superabrasive solution, CBN maintains cutting-edge stability at elevated hardness levels where conventional carbides blunt quickly; this reduces downtime for regrinding and preserves dimensional accuracy in serial production. The insert’s design supports fine depth-of-cut strategies typical of final-pass turning, offering predictable surface integrity with minimal need for corrective machining. Fewer tool changes through multidirectional turning capability Integrated into the AddMultiTurn model series, this insert is intended for a multidirectional turning system that accommodates several cutting directions with a single tool assembly. That system-oriented approach lowers the frequency of tool swaps and shortens setup times, which improves process throughput and machine utilisation. The triangular shape combined with a robust clamping interface allows reliable indexing for multiple cutting edges, enhancing overall productivity without compromising edge stability. Precision geometry for stable profiles and reliable edge life The triangular insert geometry with a 60° cutting angle and a 0.8 mm corner radius provides controlled engagement in profile and longitudinal turning, enabling repeatable contouring and shoulder work. With a plate thickness of 4.76 mm and a cylindrical hole, the insert fits standard triangular clamping systems and offers mechanical rigidity during finishing passes. Note that this grade is supplied without a chipbreaker, making it particularly suited to finishing and fine-profile cutting where chip form and evacuation are managed by the toolholder and process parameters rather than built-in breakers. For applications requiring dependable finishing on hardened steels, contact Metav Werkzeuge to discuss Tungaloy CBN solutions and obtain tailored technical advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6808102 SKU: 6808102-Tungaloy Manufacturer SKU: TUN6808102 Material: Carbide Grade: BX360 (CBN) Series: AddMultiTurn Facts Insert designation: TNGA160408 Shape: Triangular Inscribed circle/size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Cutting angle: 60° Hole: with cylindrical hole Special features Multidirectional turning system compatibility (AddMultiTurn) No chipbreaker (finish-oriented) Intended application: Turning – longitudinal, facing, profile turning Suitable for: Hardened steels and, depending on execution, cast iron FAQ What materials is this insert designed for? The TNGA160408 BX360 insert is formulated with CBN to machine hardened steels and, in certain executions, cast iron; the grade is optimised for high-hardness, wear-intensive finishing. How does the BX360 grade improve durability? Grade BX360 combines the hardness of cubic boron nitride with a carbide backing to maintain cutting-edge integrity during high-wear operations, extending tool life and stabilising part surface quality. Which toolholder systems accept this insert? The insert conforms to standard triangular clamping interfaces used in multidirectional turning systems and is supplied for integration with the AddMultiTurn holder family. Is this insert suitable for roughing operations? The TNGA160408 is supplied without a chipbreaker and is therefore primarily intended for finishing and profile turning; roughing strategies typically require dedicated geometries or chip control features. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160408 DX140 Wendeplatten - Tungaloy
Take advantage of the DX140 PCD grade and the triangular 60° geometry to achieve high-speed turning of aluminium with extended tool life and consistent surface finish; the AddMultiTurn system compatibility reduces changeovers and supports productive machining. Order the TNGA160408 directly via Metav Werkzeuge or consult our specialists for holder and process recommendations. TNGA 160408 DX140 Turning Insert (PCD) by Tungaloy — AddMultiTurn compatible The TNGA160408 DX140 is a triangular indexable insert engineered for multidirectional turning, optimised for aluminium, non-ferrous metals and abrasive non-metals in single-tool multi-directional operations. PCD DX140 for aluminium and non-ferrous Triangular 60° geometry, 0.8 mm corner radius Compatible with AddMultiTurn multidirectional system Cylindrical-hole design for secure clamping High-speed turning performance for demanding non-ferrous work The polykristalline diamant cutting layer PCD in grade DX140 enables significantly extended tool life and makes the insert particularly suited to aluminium and other non-ferrous or abrasive non-metal applications. By using a diamond cutting surface rather than standard carbide at the cutting edge, the insert sustains high speeds and long abrasion resistance, which translates into fewer tool changes and higher net productivity for repetitive turning tasks. This performance advantage helps to lower per-part machining cost while maintaining process stability. Precise geometry for consistent surface quality and stability The triangular layout with a 60° cutting angle and 0.8 mm corner radius provides a balance between edge strength and fine finish capability. The combination of a 4.76 mm plate thickness and the cylindrical hole supports reliable clamping and reduces micro-movement under load, delivering repeatable part quality in longitudinal, facing and profiling operations. The insert’s geometry reduces vibration risk and helps achieve stable surface roughness without needing complex toolpaths. Seamless integration into multidirectional tool systems Designed for the AddMultiTurn model series, this indexable insert fits systems that permit multiple cutting directions with a single tool family, simplifying tooling logistics and cut planning. The AddMultiTurn concept—comprising holder, indexable plates and a secure clamping mechanism—allows efficient changing of cutting directions and reduces setup time. For straightforward matching of holders and clamping torque, technical advice from Metav Werkzeuge is available to ensure the chosen setup exploits the insert’s multidirectional capabilities and the AddMultiTurn benefits. For optimal results with Tungaloy PCD inserts such as the TNGA160408 DX140, contact Metav Werkzeuge for holder recommendations, stock information and practical application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808100 SKU: 6808100-Tungaloy Manufacturer SKU: TUN6808100 Manufacturer: Tungaloy Model series: AddMultiTurn Core specifications ISO designation: 160408 Designation: TNGA160408 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Cutting edge angle: 60° Features & materials Grade/coating: DX140 (PCD) Cutting material: polycrystalline diamond (PCD) Substrate: carbide Shape: triangular Hole: cylindrical hole Chipbreaker: none Application: turning (longitudinal, facing, profiling) FAQ Which materials is this insert suitable for? The TNGA160408 DX140 insert from Tungaloy is specified for aluminium, non-ferrous metals and abrasive non-metals thanks to its DX140 PCD grade and is not intended as a universal solution for hardened steels. Is the insert compatible with AddMultiTurn holders? Yes, the plate is part of the AddMultiTurn model series and is designed to work within that multidirectional turning system; its cylindrical hole supports secure clamping in the recommended holders. Does this insert include a chipbreaker? The TNGA160408 DX140 is supplied without a chipbreaker; chip control relies on the PCD geometry and appropriate process parameters for non-ferrous applications. What are the size and ISO designation of the insert? The insert carries the ISO designation 160408, has a 16 mm size, 4.76 mm thickness and a 0.8 mm corner radius; reference SKU 6808100-Tungaloy for ordering. Can this insert be used for profiling and facing operations? Yes, the geometry and robust clamping arrangement make the TNGA160408 DX140 suitable for longitudinal turning, facing and profiling within its intended material range. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160408 DX160 Wendeplatten - Tungaloy
Take advantage of the combination of high cutting speeds, exceptional abrasion resistance and the modular AddMultiTurn system for efficient multidirectional turning operations; order direct via Metav Werkzeuge or consult the technical team for integration support. TNGA160408 DX160 triangular indexable insert for turning (PCD) — Tungaloy The TNGA160408 DX160 is a triangular indexable insert designed for multidirectional turning, optimised for aluminium and other non-ferrous or abrasive non-metallic materials in high-speed production environments TNGA160408 DX160 triangular insert for turning PCD grade for high cutting speeds Corner radius 0.8 mm for fine profiling Cylindrical hole for secure clamping High cutting performance with polycrystalline diamond The insert combines a polycrystalline diamond (PCD) cutting layer with a robust carbide substrate to deliver high cutting speeds and markedly extended tool life when machining aluminium and similar non-ferrous materials. The PCD grade DX160 is engineered to resist abrasive wear common in fibrous or filled non-metals, which translates directly into fewer tool changes and reduced cycle interruptions. For production-focused workshops, this results in measurable productivity gains: more parts completed per shift and lower tooling consumption over time. The wear behaviour is predictable, enabling stable process windows and consistent surface quality even under elevated cutting speeds. Geometry and clamping that support precision turning The triangular plate form with a 60° cutting angle and a 0.8 mm corner radius offers a balance between strength and profile definition, suitable for longitudinal turning, facing and profile work. The insert’s cylindrical hole and matching clamp interface within the AddMultiTurn system ensure positive location and repeatable seating, reducing runout and improving dimensional accuracy. The nominal plate thickness (4.76 mm) and 16 mm inscribed circle dimension provide a rigid cutting edge that resists deflection in interrupted or stepped cuts. The absence of a chipbreaker means chip control must be managed through cutting parameters and holder geometry, but it also preserves the integrity of the PCD cutting edge for high-quality finishes. System compatibility and recommended applications Built for the AddMultiTurn multidirectional turning system, the insert functions as part of a holder–insert–clamp assembly that enables multiple cutting directions with a single tool body. Typical use cases include precision turning of aluminium profiles, non-ferrous components and abrasive non-metallic materials where PCD outperforms conventional carbide in wear resistance and surface finish. The tool is particularly suited to applications where cycle time reduction and long uninterrupted runs are priorities. Selection of appropriate holders, feeds and speeds is essential to exploit the grade’s strengths; process parameters should account for the absence of an integrated chipbreaker and the insert’s PCD wear characteristics. Contact Metav Werkzeuge to discuss implementation of the TNGA160408 DX160 insert in production, request cutting data or schedule a technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808101 SKU: 6808101-Tungaloy Manufacturer SKU: TUN6808101 Model series: AddMultiTurn Designation: TNGA160408 Grade: DX160 Substrate material: Hartmetall Cutting material: PCD (polycrystalline diamond) Core technical data Corner radius: 0.8 mm Cutting angle: 60° Plate thickness: 4.76 mm Inscribed circle (size): 16 mm ISO designation: 160408 Special features Triangular plate form Cylindrical hole for secure clamping No chipbreaker Suited for aluminium and non-ferrous materials Suitable for abrasive non-metallic materials Intended use: turning (longitudinal, facing, profiling) System composition: holder, indexable inserts, clamping system Multidirectional turning capability with one tool FAQ What materials is this insert intended for? The TNGA160408 DX160 insert is intended primarily for aluminium, other non-ferrous metals and abrasive non-metallic materials where PCD provides superior wear resistance. Can this insert be used for hardened steel or high-alloy steels? No, the PCD grade DX160 is not designed for hardened or high-alloy steels; the insert is optimised for non-ferrous and abrasive non-metallic applications. How is the insert clamped in the holder? Clamping is achieved via a cylindrical hole combined with a matching clamp in the AddMultiTurn system, providing secure location and repeatable seating for precise turning. Does the insert include a chipbreaker? The TNGA160408 DX160 is supplied without a chipbreaker; chip control should be achieved through appropriate holder geometry and cutting parameters. Which turning operations suit this insert best? The insert is suitable for longitudinal turning, facing and profile turning where a fine corner radius and high-speed performance are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160408 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of durable carbide construction, the wear-resistant FX105 grade and a stable 60° geometry for reliable, repeatable turning results; order directly via Metav Werkzeuge or consult our specialists for application support. TNGA160408 FX105 triangular indexable insert for turning — Tungaloy (AddMultiTurn, 60°) A TNGA160408 FX105 turning insert designed for multidirectional turning, facing and profile work within the AddMultiTurn system for efficient single-tool multi-direction machining. Multidirectional AddMultiTurn system compatible FX105 Tungaloy grade for wear resistance Triangular insert, 60° cutting angle Corner radius 0.8 mm for profile work Cylindrical centre hole for secure clamping Reduce set-ups and raise productivity with multidirectional turning The AddMultiTurn concept permits several cutting directions using a single tool assembly, which reduces tool changes and machine idle time. The triangular indexable insert is engineered for multidirectional turning, allowing longitudinal, facing and profile operations without frequent holder swaps. The insert’s integration into the AddMultiTurn system translates directly into improved throughput and simpler tool logistics on the shop floor. By relying on a single, robust insert geometry, production planners can expect fewer interventions, faster cycle times and a more consistent process flow. Stable edge life and predictable surface quality from FX105 The cutting grade FX105, developed by Tungaloy, balances wear resistance and toughness to provide sustained cutting-edge stability under typical turning conditions. In practice, this means a longer interval between indexings and fewer scrap parts due to edge deterioration. For users less familiar with grade terminology: the grade optimises the microstructure and coating to resist abrasion while maintaining enough fracture resistance for interrupted cuts. The result is repeatable surface finishes and predictable tool life, which support tighter production planning and lower overall machining costs. Robust geometry and clamping for repeatable accuracy The insert’s triangular form and 60° included angle combine with a cylindrical centre hole to deliver secure clamping and consistent seat position within the holder. The corner radius 0.8 mm is suitable for medium profiling and finishing passes, offering a compromise between strength and fine edge definition. A plate thickness of 4.76 mm ensures sufficient body stiffness while keeping the cutting edge accessible for accurate cutting. The insert is supplied without a chipbreaker, which is suited to operators who prefer to control chip formation via cutting parameters or specialised holders. Together, these design choices support repeatable tolerances and simplified set-up procedures. Discuss your application with Metav Werkzeuge for tailored recommendations on Tungaloy FX105 inserts and to ensure the TNGA160408 fits the chosen holder and cycle — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical Data Article number: 6808093 Manufacturer item number: 6808093 Our SKU: 6808093-Tungaloy Manufacturer SKU: TUN6808093 Model series: AddMultiTurn Item designation: TNGA160408 FX105 Tungaloy indexable insert Core specifications Material: cemented carbide Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 60° Design & special features Triangular insert form Cylindrical centre hole Grade: FX105 (Tungaloy) No chipbreaker Application: Turning System compatibility: AddMultiTurn FAQ What machining tasks is this insert suited for? The TNGA160408 FX105 Tungaloy indexable insert is intended for turning operations, covering longitudinal turning, facing and profiling within a multidirectional AddMultiTurn setup. Which materials can be machined with this grade? The FX105 grade on the TNGA160408 insert is formulated for general turning tasks and offers a balance of wear resistance and toughness suitable for a wide range of steel and alloy turning applications. Does the insert include a chipbreaker? This insert is supplied without a chipbreaker; chip control must therefore be achieved by cutting parameters or holder design when using the TNGA160408. How does the cylindrical hole affect clamping security? The cylindrical centre hole provides a positive location and repeatable seating in compatible holders, increasing clamping stability for the TNGA160408 and supporting consistent cutting geometry. What benefits does the 0.8 mm corner radius provide? A corner radius of 0.8 mm on the TNGA160408 balances edge strength and finish capability, making it suitable for medium-profile turning and finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160408 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of high productivity, stable cutting-edge life and flexible holder compatibility for efficient turning operations; order directly via Metav Werkzeuge or consult our technical team for application-specific advice. TNGA160408 GH110 indexable insert for Turning (triangle, 60°) — Tungaloy The TNGA160408 GH110 is a triangular indexable insert designed for multidirectional turning within the AddMultiTurn system, suitable for longitudinal, facing and profile turning operations. GH110 grade for balanced performance Triangular plate, 16 mm across corners 0.8 mm corner radius for profile accuracy Cylindrical-hole design for secure clamping Increased throughput with multidirectional turning The AddMultiTurn series enables a single-tool solution for several cutting directions; this reduces tool changes and machine downtime and therefore raises throughput. The AddMultiTurn concept paired with the indexable insert geometry delivers a clear productivity advantage in batch and mixed-production setups. The combination of compact design and standard mounting means fewer set-ups and faster changeovers, while the triangle form supports multiple cutting edges per insert, increasing usable lifetime and reducing tooling costs. Reliable edge life through optimised grade technology The Tungaloy GH110 carbide grade combines wear resistance with toughness and edge stability, making it suitable for demanding turning tasks where a compromise between long life and consistent performance is required. The grade supports steady chip formation and a stable cutting edge, which translates into fewer interruptions for insert indexing and less variability in surface finish. These properties provide a measurable cost-benefit in longer production runs and when consistent part quality is essential. Secure clamping and predictable geometry for precision work The triangular insert features a cylindrical hole for secure fixation and a plate thickness of 4.76 mm to ensure rigidity under load. With a 60° included angle and a 0.8 mm corner radius, the geometry offers a balance between profile detail and edge strength. Note that the insert is supplied without a chipbreaker, so holder selection and feed strategy must match the intended turning operation; pay attention to feed direction and holder design to achieve optimal chip control and surface integrity. Versatile application focus for turning tasks This insert is developed for turning and excels in longitudinal, facing and profile turning in the AddMultiTurn system, enabling flexible toolpaths with one tooling set-up. The triangular form provides several indexing positions, while the grade and geometry support repeatable performance across batches. For workshops looking to streamline tooling inventories, the insert’s multi-edge design and robust grade reduce the number of distinct inserts required to cover common turning tasks. For tailored advice on the Tungaloy TNGA160408 GH110 indexable insert and its integration in AddMultiTurn systems, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808094 SKU: 6808094-Tungaloy Manufacturer SKU: TUN6808094 Model series: AddMultiTurn Core dimensions Plate size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Hole: with cylindrical hole Design and features Material: carbide Grade: GH110 (Tungaloy) Chipbreaker: none Plate shape: triangular Application: turning System compatibility: AddMultiTurn FAQ Which turning operations are suitable for this insert? The TNGA160408 GH110 insert is intended for longitudinal turning, facing and profile turning within multidirectional turning systems such as AddMultiTurn. What material and grade is used for the insert? The insert is manufactured from carbide and supplied in Tungaloy’s GH110 grade, designed to balance wear resistance, toughness and edge stability. Is there a chipbreaker on the insert? No, the TNGA160408 GH110 insert is supplied without a chipbreaker, so chip control depends on holder selection and cutting parameters. What are the critical geometric values to consider when setting up a toolholder? Key values are a 60° included angle, 0.8 mm corner radius, 16 mm plate size and 4.76 mm thickness; the cylindrical hole provides the primary clamping interface. How is the insert secured in the holder and which SKU identifies it? Clamping is performed via the cylindrical hole and compatible AddMultiTurn holders; the item is listed under SKU 6808094-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160408 LX10 Wendeplatten - Tungaloy
Benefit from the combination of the LX10 cutting grade, a triangular 16 mm geometry and the AddMultiTurn multidirectional system for efficient, stable turning with longer tool life. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TNGA 160408 LX10 Tungaloy indexable insert — Turning TNGA160408 LX10 Tungaloy indexable insert designed for multidirectional turning in the AddMultiTurn system, suitable for longitudinal, facing and profiling operations Triangular insert, 16 mm size, 60° included angle LX10 Tungaloy grade for wear resistance and toughness Multi-directional AddMultiTurn system compatibility Cylindrical-hole design for secure clamping Consistent productivity through a balanced grade and system The AddMultiTurn-compatible insert is engineered for a balance of wear resistance and toughness. The LX10 Tungaloy grade, applied to a carbide substrate, improves edge stability under mixed cutting conditions and helps maintain consistent cutting forces over extended tool life. Compatibility with a multidirectional turning system reduces tool changes and optimises cycle times, delivering measurable improvements in process efficiency and lower cumulative downtime. Stable cutting geometry that improves surface quality A triangular plate form with a 60° included angle and a 0.8 mm corner radius provides a robust cutting edge for general turning and profiling. The 0.8 mm corner radius distributes cutting loads, reducing the risk of edge chipping when engaging interrupted cuts and helping to produce a more consistent surface finish. The central cylindrical hole enables secure clamping in the holder, limiting vibration and ensuring repeatable positioning for serial production. Faster set-up and versatile application range With a plate size of 16 mm and a plate thickness of 4.76 mm, the insert suits many standard holders within the AddMultiTurn family and similar systems, enabling quick changeover and simplified tooling logistics. The absence of a chipbreaker makes the geometry versatile for different feed rates and material types commonly encountered in turning tasks, while the triangular form allows for multiple indexing positions, extending usable life and reducing tooling costs per finished component. Predictable performance and reduced process risk The carbide substrate combined with the LX10 formulation aims to deliver predictable wear patterns and steady cutting performance across longitudinal, facing and profiling operations. The design supports stable chip formation and repeatable edge life, which contributes to fewer unplanned interventions at the machine. For manufacturers prioritising throughput and reproducibility, this insert helps maintain part tolerances and reduces scrap rates, supporting higher overall equipment effectiveness. For reliable, multilateral turning performance with Tungaloy’s LX10 inserts, contact Metav Werkzeuge for tailored application support — eMail: info@metav-werkzeuge.com or Telefon: +49 2822 7131930 Technical data Article number: 6852197 SKU: 6852197-Tungaloy Manufacturer SKU: TUN6852197 Brand: Tungaloy Model series: AddMultiTurn Facts Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Plate form: triangular Special features Material: carbide Grade/coating: LX10 Intended application: turning (longitudinal, facing, profiling) Clamping: cylindrical hole Chipbreaker: without FAQ What operations is this insert suited for? The TNGA160408 LX10 Tungaloy indexable insert is intended for turning operations including longitudinal turning, facing and profiling in multidirectional setups. Which holder systems is the insert compatible with? Compatibility is optimised for the AddMultiTurn multidirectional turning system; the insert’s cylindrical hole and triangular form allow secure clamping and multi-directional use. What material and grade does the insert use? The insert is manufactured from a carbide substrate with the LX10 Tungaloy grade, designed to balance wear resistance and toughness for stable cutting. How large is the insert and what is its corner radius? The insert has a plate size of 16 mm and a corner radius of 0.8 mm, with a plate thickness of 4.76 mm and a 60° included angle. Does the insert include a chipbreaker? This insert is supplied without a chipbreaker, offering flexibility for varying feeds and materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160408 LX11 Wendeplatten - Tungaloy
Combine the LX11 grade's balanced wear resistance with the AddMultiTurn multidirectional system to secure consistent, repeatable turning cycles. The triangular insert with a 0.8 mm corner radius and cylindrical hole gives stable clamping and reliable edge life for longitudinal, facing and profiling operations. Order directly via Metav Werkzeuge or consult the technical advisers for application-specific recommendations. TNGA 160408 LX11 Turning insert — AddMultiTurn multidirectional system (Tungaloy) The TNGA160408 LX11 is a triangular indexable insert designed for multidirectional turning in the AddMultiTurn system, offering robust edge stability for longitudinal, facing and profiling operations. Multidirectional turning compatibility Triangular geometry for flexible indexing 0.8 mm corner radius for robust edges LX11 grade for balanced wear resistance Predictable productivity for multidirectional turning The combination of the AddMultiTurn system and the LX11 grade delivers a rational, performance-led solution for shops seeking predictable cycle times. The alloy and microstructure of the grade are tuned to balance wear resistance and toughness, reducing unexpected tool changes and improving process uptime. As the insert is intended for turning, its geometry supports consistent chip control in longitudinal, facing and profiling passes, which translates into fewer interruptions and a clearer cost-per-part calculation. Secure clamping and edge stability for repeatable results A triangular plate form with a cylindrical hole and a 60° tool angle provides stable seating and repeatable indexing. The 0.8 mm corner radius ensures a robust cutting edge that tolerates moderate interruptions and variable feed conditions while maintaining dimensional stability. Manufactured from cemented carbide, the insert’s material resists abrasive wear and retains edge geometry under mixed cutting loads. These technical choices reduce the frequency of regrinding and lower the likelihood of scrap parts, supporting steady throughput in production environments. Practical application range and handling benefits Intended for conventional turning tasks, the insert is suitable for longitudinal turning, facing and light profiling where a balance between surface finish and tool life is required. The absence of a chipbreaker simplifies selection for diverse machines and workpiece materials; process engineers can tune feeds and speeds without being constrained by specialised chip formers. The indexable design allows quick corner changes, minimising downtime and enabling efficient inventory management for high-mix, low-volume or just-in-time production scenarios. Contact Metav Werkzeuge for specification checks, advice on machining parameters and ordering of Tungaloy TNGA160408 inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808095 Manufacturer SKU: TUN6808095 Metav SKU: 6808095-Tungaloy Facts Corner radius: 0.8 mm Plate size: 16 mm Plate thickness: 4.76 mm Tool angle: 60° Clearance angle: 0° ISO designation: 160408 Special features Triangular plate form With cylindrical hole Chipbreaker: none Grade: LX11 (Tungaloy) Material: cemented carbide Intended use: turning Model series: AddMultiTurn FAQ What applications suit this insert best? The TNGA160408 LX11 insert is optimised for longitudinal turning, facing and profiling within multidirectional setups, offering a balance of edge life and surface quality. Which material classes can be machined with this grade? The LX11 grade and cemented carbide substrate provide a broad capability across common steels and alloyed steels for standard turning tasks. How does the triangular form affect tooling strategy? A triangular geometry increases indexable positions per insert and supports flexible toolholder arrangements, meaning fewer insert changes and better stock utilisation with this insert. Is a chipbreaker included, and what does that imply? This insert is supplied without a chipbreaker; the open geometry allows process engineers to select feeds and speeds tailored to the workpiece and machine setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160408 LX21 Wendeplatten - Tungaloy
Take advantage of the combination of a multidirectional turning system, the LX21 carbide grade and a compact triangular geometry for flexible, productive machining — order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNGA 160408 LX21 turning insert — Tungaloy, triangle indexable insert for turning TNGA 160408 LX21 is a triangular indexable insert designed for multidirectional turning in the AddMultiTurn system, suited to longitudinal, facing and profile turning operations. Multidirectional turning insert Tungaloy LX21 grade for wear resistance Triangle form, 16 mm size, 60° angle 0.8 mm corner radius, cylindrical hole Greater production flexibility with a multidirectional insert The AddMultiTurn series provides a compact solution for operations that require changing cutting directions without tool exchange. The triangular indexable insert offers three usable edges in a small footprint, enabling faster cycle times and reduced tool inventory. The multidirectional layout of the system reduces non-cutting time and supports efficient set-ups for combined longitudinal, facing and profile turning. As a result, the machining cell benefits from improved throughput while maintaining process stability and repeatable part quality. Robust cutting performance from the LX21 grade The Tungaloy LX21 carbide grade combines wear resistance, toughness and cutting-edge stability to meet the demands of diverse turning tasks. The material composition is optimised to resist flank wear and edge chipping under interrupted cuts, which extends effective tool life and keeps surface finish consistent. When tool life is extended, the total machining cost per component decreases; the insert’s carbide construction and geometry balance hardness and toughness for reliable performance across a broad range of steels and common alloys. Geometry that supports precision and secure clamping The triangular insert with a 16 mm inscribed circle and a 60° included angle delivers stable cutting engagement and a predictable cutting force vector. The 0.8 mm corner radius improves edge strength for finishing and light-medium roughing, while the cylindrical hole enables positive, repeatable clamping in holders designed for the AddMultiTurn series. The system comprises the holder, indexable inserts and a clamping solution, ensuring secure seating and simple indexing without compromising concentricity or run-out during high-speed rotations. Clear application scope and handling notes Designed for turning, the insert is supplied without a dedicated chipbreaker, which makes it particularly suitable for operations where chip form is managed by tool path, feeds and coolant strategy. The insert’s triangular form and hole detail suit modular holders that accept inserts with a central fixing, and the plate thickness of 4.76 mm offers a solid contact area for clamping forces. Handling and storage of indexable inserts should follow standard precautions for carbide tools: avoid impact, store in original packaging and inspect seating surfaces before assembly to ensure consistent clamping and repeatable cutting results. Contact Metav Werkzeuge for tailored holder recommendations, order placement of the Tungaloy TNGA 160408 LX21 insert (SKU 6808096-Tungaloy) or a machining assessment tailored to the intended turning application. Technical data Article number: 6808096 SKU: 6808096-Tungaloy Manufacturer SKU: TUN6808096 Model series: AddMultiTurn Grade: LX21 Material: cemented carbide Facts Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Hole: cylindrical Special features Multidirectional turning system compatibility Triangle-shaped indexable insert With central cylindrical hole No chipbreaker Intended application: turning System components: holder, indexable inserts, clamping system Manufacturer: Tungaloy FAQ What turning tasks is this insert designed for? The TNGA 160408 LX21 Tungaloy indexable insert is designed for longitudinal, facing and profile turning within a multidirectional AddMultiTurn set-up, providing flexibility across common turning operations. Which materials can be machined with this grade? The LX21 grade of the Tungaloy insert offers a balance of wear resistance and toughness that suits a wide range of steels and general turning applications; selection should follow the workpiece material and machining parameters. Does the insert include a chipbreaker? This insert is supplied without a dedicated chipbreaker; chip control is achieved through feed, speed and holder/coolant strategy when using the TNGA 160408 LX21 insert. What holder requirements are there for clamping? The insert features a cylindrical central hole for positive clamping; compatible holders in the AddMultiTurn family ensure secure seating and repeatable indexing for the TNGA 160408 geometry. How many cutting edges are available per insert? The triangular form provides three cutting edges per insert; the geometry and LX21 grade together support reliable edge performance across those indexed positions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160408 NS520 Wendeplatten - Tungaloy
Achieve consistent fine finishes and stable wear by combining the NS520 cermet grade with the triangular 60° geometry and a 0.8 mm radius. The AddMultiTurn multidirectional concept enables efficient longitudinal, facing and profile turning in one system. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored application advice. TNGA 160408 NS520 — Turning insert (triangular, 60°) by Tungaloy A TNGA 160408 NS520 insert designed for finishing and light turning of steel in multidirectional turning systems Cermet grade NS520 for fine surface finish Triangular insert with 60° cutting angle 0.8 mm corner radius for profile stability Compatible with AddMultiTurn multidirectional systems Consistent finishing and dimensional control The NS520 cermet grade is engineered for finishing to light machining of steel, prioritising surface finish and dimensional accuracy. Due to the fine microstructure of the cutting material, the insert produces a uniform wear pattern that helps maintain tolerances across long runs. This results in fewer rework cycles and more predictable component quality when high geometrical precision is required. Multidirectional productivity for fewer setup changes Built for the AddMultiTurn model series, the triangular form and 60° cutting geometry allow the insert to perform longitudinal turning, facing and profile operations without frequent tool changes. The multidirectional turning concept reduces idle time and increases machine utilisation, enabling a more streamlined production flow. Integration into a compatible holder and clamping system ensures secure positioning and repeatable cutting performance. Geometry and clamping that support stable machining A 0.8 mm radius at the cutting edge balances profile definition with edge strength, making the insert well suited to finishing contours and light profiling. The 4.76 mm thickness contributes to insert rigidity, while the cylindrical hole enables reliable clamping in common holder designs. The listed 0° clearance angle and triangular shape provide predictable contact conditions, helping to reduce vibration and maintain surface quality under standard finishing feeds. Material design and practical application notes The insert is manufactured from cemented carbide with a cermet / coated cermet specification in grade NS520, which combines wear resistance and improved surface results compared with conventional grades. The design intentionally includes no chipbreaker, aligning it with finishing tasks where chip control is less aggressive and surface integrity is paramount. When applied in finishing and light turning of steel, the insert delivers even wear, consistent part finish and reproducible dimensional results. Request cutting data or discuss holder compatibility with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6808097 Manufacturer SKU: TUN6808097 SKU: 6808097-Tungaloy Designation: TNGA160408 Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Angle: 60° Clearance angle: 0° Hole: cylindrical Special features Material: cemented carbide Grade: NS520 (cermet / coated cermet) Series: AddMultiTurn Application: turning — longitudinal, facing and profile Insert form: triangular, with hole Chipbreaker: none Clamping: compatible with holder and clamping system FAQ What operations is this insert intended for? The insert is designed for turning operations: longitudinal turning, facing and profile turning within the AddMultiTurn multidirectional system. Which materials is the insert best suited to machine? Grade NS520 is optimised for finishing and light machining of steel, offering improved surface quality and consistent wear for high-precision components. What is the effect of the 0.8 mm corner radius? A 0.8 mm radius increases edge strength while preserving profile detail, supporting stable finishing passes and reducing the risk of edge chipping. Does the insert include a chipbreaker? There is no chipbreaker on this triangular insert, which aligns it with finishing tasks where smooth chip flow and surface integrity are the priority. Which clamping arrangement is required for secure use? The insert has a cylindrical hole for positive clamping and is intended for use with compatible holders and clamping systems within the AddMultiTurn family. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160408 TH03 Wendeplatten - Tungaloy
Take advantage of the triangular geometry and sharp cutting edge to improve process efficiency and reduce cutting forces; the secure cylindrical hole and standard thickness ensure repeatable clamping and simple tool changes — order via Metav Werkzeuge or consult our specialists for tailored recommendations. TNGA 160408 TH03 triangular indexable insert for turning — Tungaloy TNGA 160408 TH03 is an indexable turning insert designed for multidirectional machining in conventional turning applications, providing a compact solution for longitudinal, facing and profiling operations. Triangle insert with three cutting edges Sharp edge for low cutting forces Cylindrical hole for secure clamping Suitable for multidirectional turning Increased productivity through low cutting forces and sharp geometry The triangular indexable insert is optimised for efficient metalcutting within the AddMultiTurn system. With a sharp cutting edge and the TH03 uncoated carbide grade, the insert reduces cutting forces and promotes stable chip formation, which translates into longer cycle times between indexings and improved process throughput. The combination of a 60° approach angle and a 0.8 mm corner radius supports controlled engagement in contour and finishing passes, reducing the risk of built-up edge and vibration. Where low cutting resistance is required, the uncoated carbide grade performs reliably while preserving surface integrity on the workpiece. Repeatable set-up and process security with secure clamping Designed as part of a system comprising holder, replaceable inserts and a clamping mechanism, the insert features a cylindrical hole for positive location and secure fastening. The standard plate thickness of 4.76 mm and insert size 16 ensure compatibility with many triangular insert holders, enabling quick changeovers and consistent tool position after each indexing. This repeatability supports tighter tolerances and fewer reworks on serial turning operations. The triangular shape provides three usable cutting edges per insert, offering economical use of each insert blank and predictable replacement intervals. Practical application advice for turning, facing and profiling This indexable insert is intended for general turning tasks where stable chip control and moderate finishing are priorities. Typical applications include longitudinal turning, facing and profiling on standard turning centres; the insert performs best when the feed and depth of cut are selected to match the sharp edge geometry and the grade’s characteristics. As the insert is supplied without a chipbreaker, process parameters and coolant strategy should be adjusted to support reliable chip evacuation in interrupted cuts or profiling work. The triangular insert is suited to production environments seeking a balance of productivity and straightforward handling within the AddMultiTurn multidirectional turning concept. For reliable, production-ready turning choose the TNGA 160408 TH03 insert from Tungaloy — contact Metav Werkzeuge for availability and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6808098 Manufacturer SKU: TUN6808098 SKU: 6808098-Tungaloy Model series: AddMultiTurn Name: TNGA160408 TH03 Tungaloy indexable insert Dimensions & numbers Insert size: 16 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Approach angle: 60° Design & features Shape: triangular insert Hole: cylindrical hole (with hole) Grade: TH03 (uncoated carbide) Chipbreaker: without Typical use: turning — longitudinal, facing, profiling FAQ Which turning operations is the insert designed for? The TNGA 160408 TH03 insert is intended for longitudinal turning, facing and profiling within multidirectional turning systems. How many usable cutting edges does the triangular insert provide? The triangular geometry provides three usable cutting edges, allowing economical indexing until all edges are utilised. Is there a chipbreaker on the insert? No, the insert is supplied without a chipbreaker and relies on process parameter selection for chip control. What clamping arrangement does the insert require? The insert uses a cylindrical hole for positive location and is designed for holders that secure triangular inserts with a central clamping method. Which grade and coating does the insert use? The insert is supplied in grade TH03 and is an uncoated carbide design, optimised for low cutting forces and good chip formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160408 TH10 Wendeplatten - Tungaloy
Benefit from a sharp TH10 uncoated carbide grade combined with a multidirectional turning system for efficient longitudinal, facing and profile operations; place orders via Metav Werkzeuge or consult Metav Werkzeuge’s advisors for application guidance. TNGA 160408 TH10 turning insert for multidirectional turning by Tungaloy A TNGA160408 TH10 triangular indexable insert engineered for multidirectional turning, suitable for longitudinal turning, facing and profiling in non-ferrous applications. *Multidirectional turning capability with single toolholder *Uncoated TH10 carbide for low cutting forces *Triangular plate with 0.8 mm nose radius *60° geometry; cylindrical hole for secure clamping Higher productivity through multidirectional capability The AddMultiTurn system delivers a productive solution for operations requiring multiple cutting directions without frequent tool changes. The combination of a triangular plate and 60° geometry permits stable cutting in longitudinal, facing and profile passes while minimising repositioning time. Integrating such an insert into a turning cell reduces non-cutting time and supports more consistent cycle times. The design of the system — holder, indexable plates and clamping mechanism — is focused on maintaining accuracy across repeated tool indexing, which translates into measurable throughput gains on batch production runs. Reduced cutting forces and improved surface quality with TH10 The uncoated TH10 grade is a sharp universal carbide intended for non-ferrous materials and applications where a clean cutting edge lowers cutting forces and enhances finish. An uncoated carbide face gives a highly defined cutting edge that reduces built-up edge on softer alloys and plastics, delivering better surface integrity. The 0.8 mm nose radius balances edge strength and fine profile definition: larger radii raise cutting forces, while smaller radii risk premature wear; this radius is therefore a compromise that supports both dimensional control and consistent surface finish in profile turning. Robust clamping and quick indexability for shop-floor efficiency Secure locating is provided by the cylindrical hole and the plate geometry, enabling consistent seat seating and repeatable tool positioning during index changes. The AddMultiTurn system's modular approach means that holders and clamps are matched to the plate form to preserve cutting geometry after each index. As an indexable solution, the insert reduces setup complexity and tool-change downtime compared with brazed or solid cutters, contributing to lower tool inventory costs and faster turnaround. For workshops seeking reliable performance with straightforward tool management, this insert supports predictable part quality and easier spindle planning. For reliable multidirectional turning with a sharp TH10 grade, order the Tungaloy TNGA160408 insert through Metav Werkzeuge or contact Metav Werkzeuge’s technical advisors at info@metav-werkzeuge.com or +49 2822 7131930 to discuss application specifics Technical data Article number: 6808099-Tungaloy Manufacturer article number: 6808099 SKU manufacturer: TUN6808099 Model series: AddMultiTurn Brand: Tungaloy Facts Plate size: 16 mm Thickness: 4.76 mm Nose radius: 0.8 mm Included angle: 60° Clearance angle: 0° ISO designation: 160408 Hole: with cylindrical hole Special features Material: uncoated carbide Grade: TH10 (sharp universal) Plate form: triangular Chipbreaker: none Application: Turning (longitudinal, facing, profile) System configuration: holder, indexable plates, clamping system (AddMultiTurn) FAQ What materials is this insert suitable for? The TNGA160408 TH10 insert is specified for non‑ferrous materials and applications where an uncoated, sharp carbide edge supports low cutting forces and clean surfaces; its TH10 grade is optimised for such use. Which turning operations are recommended with this plate? Longitudinal turning, facing and profile turning are the typical applications for this triangular indexable plate within the AddMultiTurn system. How does the 0.8 mm nose radius affect component finish? A 0.8 mm nose radius offers a balance between edge robustness and surface integrity, enabling fine profile control without excessive cutting force that could degrade finish. Is a special holder required for mounting the plate? The plate is intended for the AddMultiTurn system; matching holders and a secure clamping mechanism with a cylindrical locating hole ensure repeatable seating and safe index changes for the TNGA160408 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160412 BX360 Wendeplatten - Tungaloy
Benefit from the combination of long tool life from the CBN grade BX360, precise 60° triangular geometry and a 1.2 mm corner radius for superior finishing; suitable for hardened steels and, in specific versions, cast iron. Order the TNGA160412 BX360 directly via Metav Werkzeuge or ask our consultants for application guidance. TNGA 160412 BX360 indexable turning insert for turning — Tungaloy, CBN grade The TNGA160412 BX360 is an ISO triangular indexable insert designed for external and internal turning of hardened steels and, depending on specification, cast iron; it offers a robust clamping interface and is compatible with standard ISO holders. CBN grade BX360 for hardened steels ISO triangle 60° geometry 1.2 mm corner radius for fine finishing Cylindrical-hole design with secure clamping High performance on hardened workpieces with consistent wear life The TNGA160412 BX360 is engineered around the CBN cutting material and the BX360 grade to deliver sustained performance when machining high-hardness materials. The use of CBN ensures excellent wear resistance under the high thermal and mechanical loads of finishing hardened steels; this delivers longer intervals between index changes and reduces tooling costs per component. When compared to conventional carbide inserts for finishing, the CBN option maintains edge integrity for tougher materials, enabling a reliable, predictable process. Geometry that stabilises cuts and improves surface quality A 60° included angle and triangular plate form provide multiple usable cutting edges and favourable engagement for a variety of turning tasks. The 1.2 mm corner radius is optimised for finishing cuts, supporting improved surface integrity with minimal vibration. The insert’s 4.76 mm plate thickness and cylindrical hole support secure clamping, which reduces the risk of movement under load and contributes to repeatable part geometry and consistent surface finish during series production. System compatibility and safe clamping for practical workshop use Compatibility with toolholders depends on shape, clearance angle, tolerance class, clamping and thickness; this conforms to the ISO indexable insert system. The insert is supplied in the ISO size designation TNGA160412 and works with corresponding external holders, boring bars and shims that match the geometry and hole style. The cemented carbide substrate beneath the CBN layer ensures base stability and resistance to breakage during process disturbances, while the absence of a chipbreaker in this variant should be considered when matching insert selection to cutting conditions. Practical advantages and recommended applications This insert is particularly suited to final finishing and high-precision turning of hardened steels where edge life and surface quality are critical. Its CBN composition supports sustained cutting at moderate to high cutting speeds appropriate for abrasive, hardened materials, while the robust design reduces downtime for insert changes. For cast iron applications, confirm the specific version and chip control requirements before selection; matching the insert grade and holder rigidity to the machining setup secures the best outcome in cycle time and part quality. For application-specific recommendations, availability and ordering of the TNGA160412 BX360, please contact Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) to discuss suitability for a given turning task. Technical Data Article number: 6808109 SKU: 6808109-Tungaloy Manufacturer SKU: TUN6808109 Model series: ISO indexable turning inserts Designation: TNGA160412 BX360 Core data Insert designation: TNGA160412 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 60° Free rake angle: 0° Hole style: cylindrical Special features Cutting material: CBN (BX360) Substrate: cemented carbide Shape: triangular Application: turning ISO compatibility with matching holders No chipbreaker included FAQ What materials is this insert suitable for? The TNGA160412 BX360 insert is specified for machining hardened steels and, depending on the version, can also be used on cast iron; the CBN cutting phase provides high wear resistance for such applications. How many cutting edges are available per insert? As a triangular indexable plate, the TNGA160412 provides multiple cutting edges that can be indexed in sequence to extend tool life and reduce downtime. Which holders are compatible with this insert? Compatibility is determined by ISO geometry: holders and boring bars that accept the TNGA160412 form, thickness and cylindrical hole clamping will be compatible; check holder clearance and tolerance class before fitting. Is a chipbreaker included with this grade? This variant is supplied without a chipbreaker; chip control should therefore be managed via cutting parameters and holder stability or by selecting an alternative grade with an integrated chipbreaker if required. What is the recommended use for the BX360 grade? The BX360 CBN grade is intended for wear-intensive finishing of hardened workpieces, offering consistent edge life and quality in demanding turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160412 FX105 Wendeplatten - Tungaloy
Optimise turning operations with a combination of the FX105 wear-resistant grade, the TNGA 60° triangle geometry and a 1.2 mm corner radius for stable cutting performance and predictable tool life; order the TNGA160412 FX105 insert via Metav Werkzeuge or consult their specialists for application advice. TNGA 160412 FX105 ISO turning insert, triangle 60° — Tungaloy A TNGA160412 FX105 turning insert designed for ISO-compatible external and internal turning applications, offering a balanced mix of wear resistance and edge stability. ISO 160412 triangle insert with 60° geometry FX105 Tungaloy grade for wear resistance 1.2 mm corner radius for robust edge strength Cylindrical hole for secure clamping Consistent ISO geometry for predictable results The ISO 160412 designation denotes a standardised triangular insert form that simplifies holder selection and process planning. The 60° cutting angle provides stable engagement in both external and internal turning routines, while the triangular shape allows three indexed cutting edges, reducing changeover time. Compatibility with a holder is determined by shape, clearance angle, tolerance class, fastening, size and thickness, so the part secures reliably in compatible clamping systems. This design focus translates into predictable chip loads and repeatable cycle times. FX105 grade: balanced wear resistance and edge stability The FX105 cutting grade from Tungaloy combines wear resistance with sufficient toughness to maintain a stable cutting edge under variable conditions. That balance reduces flank wear and helps preserve dimensional accuracy over multiple parts, extending effective tool life without compromising cutting performance. For production environments prioritising consistent surface quality and fewer insert changes, the grade supports higher productivity while keeping process windows manageable. The carbide base material sustains the mechanical and thermal loads typical of turning operations. Practical dimensions and secure handling reduce downtime Key dimensions — 16 mm plate size, 4.76 mm thickness and a 1.2 mm corner radius — provide a robust cutting edge suited to medium-duty turning tasks where edge integrity matters. The insert features a cylindrical hole for positive mechanical location and secure clamping, and a 0° clearance angle where specified by the geometry, simplifying seat design for compatible holders. The system concept comprises the insert plus a matching external holder or boring bar, shim/clamp set and replacement screws; this modularity enables fast index changes and limits fixture-related errors. For further technical data or guidance on selecting an appropriate chipbreaker and grade for specific workpieces, Metav Werkzeuge can provide detailed advice. For reliable, high-performance turning with the FX105 grade, contact Metav Werkzeuge for availability and application advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808104 Manufacturer SKU: TUN6808104 Supplier SKU: 6808104-Tungaloy Designation: TNGA160412 FX105 Model series: ISO turning inserts Core dimensions Plate size: 16 Thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 60° Clearance angle: 0° Hole: with hole Hole style: cylindrical Materials & features Material: carbide Grade: FX105 (Tungaloy) Plate form: triangle Chipbreaker: without Application: turning System requirements: ISO-compatible holders, shim/clamp sets, replacement screws Compatibility determinants: shape, clearance, tolerance class, fastening, size, thickness FAQ What determines whether this insert fits a specific holder? Compatibility depends on the insert form and dimensions; the TNGA160412 insert fits holders designed for ISO 160412 geometry and is located and clamped via the cylindrical hole and matching clamping set. Which cutting conditions suit the FX105 grade? The FX105 grade from Tungaloy is formulated to balance wear resistance and toughness, making it suitable for general turning tasks where edge stability and extended life are required; selection of chipbreaker and cutting data should match the workpiece and process stability. How is the insert secured in the holder? This triangular insert uses a cylindrical hole and standard clamping hardware (shim and clamping screw) for positive location and secure fastening in compatible ISO holders. Does the insert include a chipbreaker? The supplied TNGA160412 FX105 variant is specified without a chipbreaker; chip control is achieved via suitable holder geometry or alternative insert grades with integrated breakers. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and helps maintain dimensional stability under intermittent cuts, offering a compromise between edge robustness and achievable surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160412 LX10 Wendeplatten - Tungaloy
TNGA160412 LX10 Tungaloy-Wendeplatte — ISO-Drehwendeschneidplatte zum Drehen Die TNGA160412 LX10 Tungaloy-Wendeplatte bietet eine ausgewogene Kombination aus Verschleißfestigkeit und Zähigkeit und ist für präzises Außen- und Innendrehen konzipiert. TNGA160412 LX10 von Tungaloy Hartmetall-Sorte LX10 für hohe Standzeit Dreieckige Platte mit zylindrischem Loch 1,2 mm Eckradius für maßgenaue Kontur ISO-genormt, kompatibel mit gängigen Haltern Effizienzsteigerung durch optimierte Schneidstoffkombination Die Verwendung der Hartmetall-Sorte LX10 sorgt für eine stabile Spanbildung und lange Standzeit, was die Stillstandszeiten in der Fertigung reduziert. Durch die ausgeglichene Balance von Verschleißfestigkeit und Zähigkeit lässt sich die Schnittparameterbreite erweitern, sodass in vielen Anwendungsszenarien höhere Vorschübe oder längere Werkzeuglaufzeiten möglich sind. Das Ergebnis ist höhere Produktivität bei gleichbleibender Bauteilqualität. Präzise Konturen und Oberflächen bei Außen- und Innendrehen Die dreieckige Plattenform mit 1,2 mm Eckradius und 0° Freiwinkel ermöglicht wiederholgenaue Konturen und eine saubere Schnittkante. Ein kleiner Eckradius unterstützt das Einhalten enger Toleranzen, während die ISO-Normierung die Auswahl eines passenden Halters erleichtert. Anwender profitieren von konstanter Oberflächengüte und reproduzierbaren Ergebnissen auch bei anspruchsvollen Bearbeitungsaufgaben. Systemkompatibilität reduziert Rüstzeiten Dank ISO-Genormtheit sind Passung und Befestigung zuverlässig bestimmbar; Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke entscheiden über die Kompatibilität mit Halter und Bohrstange. Die Platte ist mit zylindrischem Loch ausgestattet, wodurch Montage und Schraubenwechsel schnell ausgeführt werden können. Für Anwender mit wenig Erfahrung: Der Freiwinkel verringert das Reiben am Werkstück, der Eckradius beeinflusst die Kantenausbildung und damit die Maßhaltigkeit. Empfehlung: Die TNGA160412 LX10 von Tungaloy ist ideal für produktive Zerspanung; Beratung und Bestellung über Metav Werkzeuge unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Leistungsmerkmale Artikelnummer: 6852199 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: TNGA160412 LX10 Tungaloy-Wendeplatte Hersteller SKU: TUN6852199 Daten Radius: 1,2 mm Plattendicke: 4,76 mm Plattengröße: 16 mm Winkel: 60° Besonderheiten Material: Hartmetall Sorte: LX10 (Tungaloy-Schneidstoffsorte) Schneidstofftyp: Tungaloy-Schneidstoffsorte Loch: mit Loch (zylindrisches Loch) Plattenform: dreieckig Freiwinkel: 0° Spanbrecher: ohne Einsatz: Drehen Modellserie: ISO-Drehwendeschneidplatten Hinweis ISO: ISO = internationale Norm zur Kompatibilität von Platten und Haltern FAQ Welche Werkstoffe lassen sich mit der TNGA160412 LX10 bearbeiten? Die TNGA160412 LX10 von Tungaloy ist für vielfältige Drehanwendungen ausgelegt; die LX10-Sorte bietet eine gute Kombination aus Verschleißfestigkeit und Zähigkeit, wodurch typische Stahl- und Gussbearbeitungen sowie allgemein anspruchsvolle Zerspanungsaufgaben effizient ausgeführt werden können. Wie beeinflusst der Eckradius von 1,2 mm das Bearbeitungsergebnis? Der Eckradius von 1,2 mm sorgt für robustere Schneidkanten und bessere Kantenausbildung; das reduziert Kantenbruch und trägt zu konstanter Oberflächengüte bei, insbesondere bei Konturwechseln und gedämpften Schnitten. Ist die TNGA160412 LX10 mit Standard-Außenhaltern kompatibel? Ja, die TNGA160412 LX10 ist ISO-genormt; die Kompatibilität zu Haltern ergibt sich aus Form, Freiwinkel, Toleranzklasse und Plattendicke. Bei Bedarf kann die Auswahl des passenden Halters über Metav Werkzeuge abgestimmt werden. Welche Vorteile bietet die LX10-Sorte gegenüber konventionellen Sorten? Die LX10-Sorte von Tungaloy kombiniert moderne Schneidstoffentwicklung mit praxisorientierter Standzeitstabilität; Anwender profitieren von planbaren Werkzeugwechselintervallen und stabiler Spanbildung auch unter wechselnden Schnittbedingungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNGA 160412 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant tungsten carbide, the LX11 grade balance of toughness and edge stability, and the 60° triangle geometry for reliable turning performance; order the TNGA 160412 LX11 directly via Metav Werkzeuge or consult our specialists for cutting-edge integration advice. TNGA 160412 LX11 — Tungaloy indexable insert for turning, triangle 60°, R1.2 mm The TNGA 160412 LX11 is an ISO-conforming triangle indexable insert designed for external and internal turning. Its combination of a tungsten carbide substrate and the LX11 cutting grade provides a compromise between wear resistance and edge stability, while the 60° geometry and 1.2 mm corner radius support stable engagement and multiple indexing positions in serial production. ISO triangle insert TNGA 160412 LX11 Robust tungsten carbide body 60° cutting angle, R1.2 mm corner radius Cylindrical hole, 4.76 mm thickness Consistent cutting performance through material and geometry The insert’s tungsten carbide construction and the LX11 grade deliver predictable tool life by balancing abrasion resistance with sufficient toughness to resist chipping. The triangle form gives three usable cutting corners, ensuring rapid re-indexing and reduced downtime. The 1.2 mm corner radius helps spread cutting forces for smoother finishes on typical turning tasks while the 60° cutting angle is suited to standard external and internal turning profiles, translating directly into steady component tolerance control. Simple integration with ISO-holder systems for fast tool changes Produced to ISO dimensions, the insert fits compatible holders where form, clearance angle, tolerance class, attachment style, size and thickness match. The insert features a cylindrical hole for secure clamping and a plate thickness of 4.76 mm, enabling solid contact with the seat and reliable repeatability. As part of a turning system—insert, suitable external holder or boring bar, shim and clamp assembly—this component supports quick replacement and predictable set-up times in batch and continuous machining. Productivity advantages for everyday workshop use Selecting the right grade and geometry reduces scrap and machine idle time. With the LX11 grade focusing on edge stability and wear performance, batch runs become more economical through extended edge life and fewer interruptions for tool changes. The design is intended for a wide range of turning tasks; matching the insert to a compatible chip control geometry and clamping arrangement helps achieve consistent surface quality and process reliability, which supports higher overall throughput in production environments. For integration assistance and to secure TNGA 160412 LX11 inserts from Tungaloy for your turning applications, contact Metav Werkzeuge for tailored advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6808105 Manufacturer SKU: TUN6808105 SKU: 6808105-Tungaloy Model series: ISO turning indexable inserts ISO designation: 160412 Application: Turning Material: Tungsten carbide Facts Corner radius: 1.2 mm Cutting angle: 60° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 16 mm Special features Grade: LX11 Manufacturer: Tungaloy Plate form: Triangle With hole: yes Hole style: Cylindrical hole Without chipbreaker FAQ What materials can this insert machine effectively? The TNGA 160412 LX11 Tungaloy indexable insert is formulated for turning applications; the LX11 grade offers a balance of wear resistance and toughness suitable for a broad range of steels and general turning tasks when matched with the correct holder and cutting parameters. Is the insert compatible with ISO holders? Yes, the insert follows ISO dimensions (160412) so compatibility depends on matching holder form, free angle, tolerance class, attachment method, size and thickness typical for ISO turning inserts. How many cutting edges are available per insert? The triangle plate form provides three usable edges; re-indexing restores a fresh cutting corner to maintain consistent performance during production. Does this insert include a chipbreaker? This specific designation is supplied without a chipbreaker; chip control should be achieved by selecting an appropriate geometry and machining parameters in combination with the chosen holder. What does the 1.2 mm corner radius influence on turning results? A 1.2 mm corner radius improves surface finish and distributes cutting forces across a larger edge, which can reduce chatter and extend edge life in standard turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160412 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of NS520 cermet for superior surface quality, ISO compatibility for quick integration, and a 1.2 mm corner radius for controlled profile finishing; order the TNGA160412 NS520 insert directly via Metav Werkzeuge or ask our consultants if needed. TNGA160412 NS520 – ISO triangular turning insert, cermet grade for finishing (Tungaloy) TNGA160412 NS520 is an ISO-format, triangular turning insert designed for finishing and light machining of steel, offering consistent wear behaviour and high surface quality. Cermet grade NS520 for fine finishing ISO TNGA triangular 16 mm size 1.2 mm corner radius for smooth profiles Cylindrical-hole secure fastening Precise finishing performance with cermet NS520 The insert is produced in the NS520 cermet grade, optimised for surface finish and dimensional accuracy in finishing and light-turning operations. The cermet cutting material combines hardness and thermal stability to reduce built-up edge and promote steady flank wear; this results in fewer reworks and a predictable component finish. The controlled geometry supports repeatable results on steel components where tight tolerances and good surface integrity are required. System compatibility and secure mounting for efficient changeovers Designed as an ISO-format triangular plate, the insert features ISO compatibility and a cylindrical hole for positive clamping in matching holders. The triangular geometry with a 1.2 mm corner radius and a plate thickness of 4.76 mm enables secure seating and predictable cutting engagement. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening, size and thickness; this modular approach reduces setup time and simplifies stocking across multiple turning stations. Application advice for reliable light machining and finishing Intended primarily for turning, the insert performs best in finishing to light material removal on steel when paired with a suitable holder and stable machine setup. The insert has a 0° clearance specification and is supplied without a chipbreaker, so selection of an appropriate chip control feature or cutting parameter is advised depending on material and stability. For optimal results, match machining parameters and holder rigidity to the insert’s geometry and material characteristics; for further machining recommendations, technical data and availability can be provided on request. Contact details are available below for specific queries. For application advice, availability and fast delivery of Tungaloy NS520 inserts contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 and request the TNGA160412 NS520 SKU TUN6808107 Technical Data Article number: 6808107 SKU: 6808107-Tungaloy Manufacturer SKU: TUN6808107 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.2 mm Size: 16 mm Thickness: 4.76 mm Clearance angle: 0° Insert angle: 60° Hole style: cylindrical Special features Material: carbide Cutting material: cermet (NS520) Application: turning (finishing to light machining of steel) Chipbreaker: none ISO designation: TNGA160412 Mounting: with hole (cylindrical) Suitable for ISO holders when matched by form and tolerance FAQ What materials is this insert suitable for? This insert in NS520 cermet is specified for finishing and light machining of steel and is optimised for surface quality and dimensional stability. Does the TNGA160412 NS520 have a chipbreaker? The insert is supplied without a chipbreaker; chip control should be managed via cutting parameters or by selecting a suitable holder or alternative insert variant. Which holders are compatible with this ISO insert? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the TNGA160412 matches standard ISO triangular turning holders when those parameters align. What are the key dimensional specifications to check before ordering? Check the corner radius (1.2 mm), plate size (16 mm), thickness (4.76 mm), clearance angle (0°) and the cylindrical hole for correct mounting. How should the TNGA160412 NS520 be used for best surface finish? Use the insert for finishing cuts with stable clamping and appropriate cutting data; the NS520 cermet supports low flank wear and consistent surface quality under suitable machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160412 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of durable uncoated cemented carbide, ISO-standard geometry and low cutting forces for predictable turning results; order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and holder compatibility. TNGA 160412 TH10 triangular ISO turning insert – 60° geometry, 1.2 mm corner radius (Tungaloy) The TNGA160412 TH10 is a triangular ISO turning insert designed for external and internal turning applications, delivering a sharp uncoated cutting edge for low cutting forces and clean surface finishes. Triangular ISO insert, 60° geometry Uncoated cemented carbide TH10 grade 1.2 mm corner radius for robust edge Compatible with ISO turning holders Lower cutting force for economical production The triangular insert's uncoated carbide edge and TH10 grade combine to reduce cutting forces compared with more abrasive grades, which supports lower power draw and less tool-induced vibration. This translates into measurable productivity benefits: steadier feeds, extended tool life in many non-ferrous and mixed-material jobs, and improved consistency across batches. Explaining briefly, an uncoated cemented carbide edge removes the variability introduced by brittle coatings in light-cut operations, so machinists can expect reliable, low-friction machining when handling softer alloys or aluminium alloys. Predictable edge strength and surface quality A 1.2 mm corner radius with a 60° insert geometry provides a compromise between edge strength and achievable surface finish. The larger corner radius increases resistance to edge chipping during interrupted cuts, while the triangular shape gives three indexed cutting corners for cost-effective use. For applications where a clean finish is required, the sharpness inherent in an uncoated grade supports finer feeds without excessive rubbing, producing consistent surfaces on components where appearance and dimensional repeatability matter. Simple integration with standard turning systems ISO-standard plates simplify the selection of a compatible holder: form, rake angle, tolerance class, clamping method, size and thickness determine fit. The insert's cylindrical hole and standard thickness of 4.76 mm ensure secure clamping in common external holders and boring bars, making retrofit straightforward. Specifying ISO-conformant geometry reduces setup time and the risk of incompatibility in mixed fleets, so production planners can standardise stock and reduce spindle downtime. Application guidance and material suitability Designed primarily for turning, the insert performs best in operations on non-ferrous materials and situations where an uncoated cutting edge supports low cutting forces and clean chip formation. The universal sharp grade is particularly appropriate for aluminium alloys, copper alloys and softer steels, as well as general-purpose machining where coating adhesion or thermal sensitivity might be a concern. For steel and hardened applications, select a grade and chipbreaker specifically designed for those materials to ensure optimal wear resistance and process security. For reliable uncoated carbide performance from Tungaloy, contact Metav Werkzeuge to request cutting parameters, confirm holder compatibility or place an order; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 6808108 Manufacturer SKU: TUN6808108 SKU: 6808108-Tungaloy Facts ISO designation: 160412 Corner radius: 1.2 mm Insert size: 16 mm Thickness: 4.76 mm Included hole: with cylindrical hole Geometry angle: 60° Special features Material: cemented carbide (uncoated) Grade: TH10 Plate form: triangular Typical application: turning (external and internal) Chipbreaker: none Series: ISO turning inserts FAQ What materials is this insert best suited for? The TNGA160412 TH10 insert is optimised for non-ferrous materials and general-purpose turning where an uncoated cemented carbide edge benefits low cutting forces and clean chip formation. How many cutting edges are available per insert? The triangular shape provides three indexed cutting corners, enabling economical reindexing and multiple uses from a single insert. Is the insert compatible with standard ISO holders? Yes, the TNGA160412 follows ISO-standard dimensions and features a cylindrical hole, which ensures compatibility with matching ISO turning holders when form, tolerance and clamping method are observed. Does the insert include a chipbreaker? This grade is supplied without a chipbreaker; it is intended for applications where an uncoated sharp edge yields controlled chips in softer materials. What advantages does the TH10 grade deliver? TH10 is an uncoated universal grade that supports low cutting forces and good surface finishes in non-ferrous machining, offering a balanced option for versatile production tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGA 160416 FX105 Wendeplatten - Tungaloy
Take advantage of an ISO‑standard triangular insert that pairs Tungaloy FX105 wear resistance with a robust carbide body, providing consistent edge life for external and internal turning. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNGA 160416 FX105 Tungaloy indexable turning insert — ISO triangular 60° 1.6 mm radius The TNGA160416 FX105 is an ISO‑normed triangular indexable turning insert intended for general external and internal turning, combining a sturdy carbide substrate with a wear‑resistant FX105 grade for industrial machining. ISO triangular insert for turning, 60° angle FX105 Tungaloy grade for wear resistance 1.6 mm corner radius for robust edge Carbide body with cylindrical centre hole Consistent cutting performance through grade and substrate The combination of the FX105 grade and a carbide substrate delivers a balanced mix of wear resistance and toughness that reduces unplanned tool changes and maintains part quality over longer runs. The FX105 composition is designed to support stable cutting edges, which translates into fewer interruptions for regrinding or replacement and a more predictable production rhythm. For routine turning tasks, this balance helps to lower unit costs by extending insert life while preserving surface finish standards. Clear compatibility and simple system integration Being an ISO series insert, compatibility is determined by insert form, 0° clearance, tolerance class, fastening method, nominal size and thickness. The TNGA form with a 60° included angle and a cylindrical hole ensures secure clamping in appropriately sized external holders or boring bars. The insert integrates into the typical system build of insert — matching holder or boring bar — together with a shim or clamp set and replacement fastening screws, allowing rapid exchange and straightforward inventory management. This modular approach reduces machine downtime and streamlines tool supply chains. Application suitability and handling recommendations With a 1.6 mm radius and a plate thickness of 4.76 mm, the insert is suitable for a wide range of turning operations where an economical, durable edge is required. The insert is supplied without a chipbreaker, making it appropriate where chip control is managed by workpiece geometry, process parameters or specialised holders; selecting the correct chip control strategy and machining parameters will optimise surface finish and tool life. The geometry and grade make the insert a solid choice for routine finishing and semi‑finishing in production environments that prioritise repeatability and process stability. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts and to arrange supply; eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific turning tasks Technical data Manufacturer article number: 6808111 Manufacturer SKU: TUN6808111 Label: TNGA160416 FX105 Tungaloy indexable insert Model series: ISO turning indexable inserts Facts Corner radius: 1.6 mm Insert angle: 60° Thickness: 4.76 mm Size: 16 mm Hole: with cylindrical hole Clearance angle: 0° Special features Material: carbide Grade: FX105 (Tungaloy) Shape: triangular Chipbreaker: without Application: turning (external and internal) System components: compatible holders, shims/clamp sets and replacement screws FAQ What holder types are compatible with this ISO insert? Compatibility depends on insert form, fastening method and tolerance class; the TNGA form fits holders and boring bars designed for 60° triangular ISO inserts and uses a cylindrical centre hole for secure clamping. Is the FX105 grade suitable for heavy interrupted cuts? The FX105 Tungaloy grade is formulated for balanced wear resistance and edge stability; it performs well under varying load conditions, though heavy interruptions may call for a specialised geometry or grade optimised for toughness. Does this insert include a chipbreaker? This insert is supplied without a chipbreaker; chip control should be achieved via holder choice, cutting parameters or a compatible chipbreaking insert geometry where required. What machining tasks is the insert intended for? Designed for external and internal turning, the insert is suitable for semi‑finish and finish passes where a consistent edge and predictable tool life are priorities. How does the 1.6 mm corner radius affect performance? A 1.6 mm radius provides a robust cutting edge that improves edge stability and resistance to chipping, which is beneficial for maintaining surface finish and extending insert life in routine turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com