TNGG 160402 GH110 Wendeplatten - Tungaloy
Combine the GH110 cutting grade with the 60° triangular geometry and a 0.2 mm nose radius for predictable wear behaviour and consistent surface finish; order directly via Metav Werkzeuge or consult our specialists for application advice. TNGG 160402 GH110 Tungaloy turning insert TNGG 160402 GH110 is an ISO‑standard triangular indexable insert designed for general turning operations, offering a balance of wear resistance and edge stability for production environments. GH110 carbide grade for wear resistance 60° triangular shape for secure clamping 0.2 mm nose radius for fine profiling Double-sided chipbreaker for economical use Consistent cutting performance with the GH110 grade The GH110 cutting grade, developed by Tungaloy, combines wear resistance and sufficient toughness to handle a wide range of turning tasks. As a cemented carbide insert, this geometry is particularly effective where stable edge life and repeatable surface quality are required. The 0.2 mm nose radius supports fine profiling and dimensional control, while the double-sided chipbreaker helps to moderate chip flow and reduce built‑up edge, contributing to fewer interruptions in production. For engineers aiming to increase uptime, these properties translate into predictable tool life and reduced downtime. Secure mounting and ISO system compatibility The insert follows the ISO series conventions and is compatible with holders that match its form, clearance angle 0°, tolerance class, clamping method, size and thickness. The triangular shape with a cylindrical hole allows reliable clamping and straightforward indexation; each flank and side is designed to be re‑indexed to extend usability. With a nominal size of 16 mm and a plate thickness of 4.76 mm, the geometry suits standard turning toolholders and boring bars specified for ISO turning plates, making integration into existing tool systems uncomplicated. This compatibility reduces engineering time when selecting or replacing cutting edges. Process reliability and practical benefits on the shop floor Designed for general turning, the insert's triangular geometry and 60° included angle provide multiple indexable corners, allowing economical use of the cutting edges. The double-sided chipbreaker is optimised for controlled chip formation, which assists in maintaining stable cutting forces and consistent surface finish during serial machining. As an indexable solution, it simplifies inventory management compared with brazed or solid tools and supports quick changeover in mixed‑batch production. The combination of grade, geometry and hole style is aimed at delivering steady performance in everyday machining scenarios. For precise turning applications requiring the Tungaloy GH110 grade, contact Metav Werkzeuge for supply and technical matching at info@metav-werkzeuge.com or +49 2822 7131930 — our consultants will assist with holder compatibility and process suggestions Technical data Article number: 6808147 Manufacturer SKU: TUN6808147 SKU: 6808147-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Included angle: 60° Special features Grade: GH110 Chipbreaker: double-sided Shape: triangular Hole: with cylindrical hole Intended use: turning Indexable ISO turning insert Brand: Tungaloy FAQ What applications is this insert suitable for? The insert is intended for turning operations; the GH110 grade and triangular form suit external and internal turning where a balance of wear resistance and edge stability is required. How many usable cutting edges does the triangular insert offer? With its triangular geometry and double‑sided design, the insert provides multiple indexable corners so that the cutting edges can be rotated to renew the cutting edge and extend service life. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; the ISO format and cylindrical hole allow use with standard ISO turning toolholders designed for this plate size. What benefits does the double-sided chipbreaker provide? The double‑sided chipbreaker manages chip flow on both faces, improving chip control and contributing to consistent cutting forces and surface finish during serial production. Is the GH110 grade suitable for mixed production environments? Yes, the GH110 cemented carbide grade is formulated to balance wear resistance and toughness, making it a good choice for varied turning tasks where reliable tool life is important. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 GH110 Wendeplatten - Tungaloy
Benefit from the combination of GH110 wear resistance and a precise 60° triangular geometry for consistent turning performance and predictable tool life; the design and double-sided chipbreaker support economical indexing and reduced downtime. Order the insert directly via Metav Werkzeuge or consult our specialists for application recommendations. TNGG 160402 GH110 Tungaloy indexable insert for turning (triangular, 60°) A TNGG160402 GH110 indexable insert designed for ISO turning tasks, offering a compact triangular form with a 0.2 mm corner radius for fine finishing in external and internal turning operations. ISO triangular turning insert TNGG160402 Tungaloy GH110 wear-resistant carbide grade 60° geometry for standard toolholders 0.2 mm corner radius for fine finishing Double-sided chipbreaker with cylindrical hole Consistent cutting performance and predictable tool life The grade GH110 is a Tungaloy carbide formulation balanced for wear resistance and edge stability, making it suitable for a wide range of turning tasks where repeatable performance is required. Using this indexable insert ensures predictable tool-change intervals and stable cutting forces, which supports higher process reliability on production machines. The calibrated geometry and robust grade reduce flank wear and preserve surface quality over longer series runs. Precision geometry for accurate internal and external turning The triangular plate with a 60° cutting angle and 0.2 mm corner radius gives a precise contact geometry that favours finishing and light-to-medium roughing passes. The ISO-design ensures compatibility with standard holders when the form, relief angle, tolerance class, fastening and thickness match the clamping system. A 0° relief angle is indicated for this insert, meaning the seating and holder combination must control clearance and tool approach for optimal chip flow and surface finish. Integration and productivity in machining processes A double-sided chipbreaker combined with a cylindrical hole allows secure clamping and economical indexing: both faces can be rotated into service, effectively doubling insert life for suitable applications. The plate thickness of 4.76 mm and the 16 mm size provide mechanical stability for consistent cutting, while the carbide construction withstands intermittent loads and maintains edge integrity. Select the chipbreaker and grade to match the workpiece material and machining stability for best results. For tailored recommendations on using Tungaloy GH110 indexable inserts in specific turning setups, contact Metav Werkzeuge for application guidance at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6808156 Manufacturer SKU: TUN6808156 SKU: 6808156-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Cutting angle: 60° Relief angle: 0° Special features Material: Carbide Grade: GH110 Plate form: triangular Chipbreaker: double-sided Hole: cylindrical hole Compatibility: ISO turning insert series Application: Turning FAQ What turning tasks is this insert intended for? The TNGG160402 GH110 indexable insert from Tungaloy is intended for general turning operations, suitable for both external and internal turning when combined with an appropriate holder and stable setup. How is the insert secured in the toolholder? Securing depends on the holder: the insert features a cylindrical hole and requires a matching clamping system; compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. Can both sides of the insert be used? Yes, the double-sided chipbreaker allows indexing of both faces, which effectively extends usable life when the cutting edge remains within wear limits. What impact does the 0.2 mm corner radius have on the finish? A 0.2 mm corner radius provides improved surface finish and reduced cutting-edge stress for light finishing passes, balancing strength and fine surface generation. Which parameters should be checked before machining? Check holder compatibility, clamping torque, approach angle and recommended speeds for the selected GH110 grade to ensure stable cutting and consistent chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 GH330 Wendeplatten - Tungaloy
Benefit from the combination of GH330 wear resistance, precise 0.2 mm nose geometry and ISO compatibility to maintain steady production and predictable tool life. Order the insert directly via Metav Werkzeuge or consult the staff for holder, clamping set and spare-screw matching. TNGG 160402 GH330 indexable turning insert — ISO triangle, 60° included angle, Tungaloy TNGG160402 GH330 is an ISO‑standard triangular indexable insert designed for external and internal turning where a balance of wear resistance and edge stability is required ISO triangle insert TNGG 160402 GH330 grade for wear resistance Double-sided chipbreaker design 0.2 mm nose radius for fine turning Consistent edge life for reliable productivity The TNGG160402 GH330 insert combines a dedicated carbide substrate with the GH330 cutting grade to deliver consistent wear resistance and maintained cutting-edge stability under typical turning conditions. The balanced composition of toughness and hardness reduces unexpected tool changeovers, supporting predictable cycle times and higher overall productivity. This rational advantage translates into fewer stoppages and lower process variability when machining steels and comparable workpiece materials. ISO compatibility that simplifies tool management As an ISO standard triangle insert with a 60° included angle and a nominal size of 16 mm, the component fits common turning holders when form, clearance angle, tolerance class, attachment method, size and thickness match. The 4.76 mm plate thickness and standard mounting bore support fast identification and interchangeability in mixed toolrooms, reducing set‑up time and inventory complexity. Standardisation here improves planning, stocking and the economics of tool usage across batch and single‑piece production. Geometry and clamping for controlled chips and surface finish A double‑sided chipbreaker optimised for turning, paired with a 0.2 mm nose radius, provides improved chip control and a stable contact zone for fine finishes. The insert’s cylindrical hole enables secure clamping in the holder and straightforward replacement of screws and underlay items, forming a complete system with the external holder or boring bar. The result is repeatable surface quality and manageable chip formation under varying feeds and depths of cut. Contact Metav Werkzeuge for application advice on holders and clamping sets, availability of the Tungaloy TNGG160402 GH330 insert, or to request a personalised tooling recommendation. Technical Data Article number: 6808148 Manufacturer SKU: TUN6808148 Manufacturer: Tungaloy Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Clearance angle: 0° Hole: with hole (cylindrical) Special features Carbide material Grade GH330 Triangle plate form Double-sided chipbreaker Cylindrical bore for clamping ISO turning application compatibility Suitable for external and internal turning Indexable, reversible insert FAQ What materials is this insert intended for? The TNGG160402 GH330 insert is formulated as a general turning solution; the GH330 grade provides a balance of wear resistance and toughness suitable for many steels and similar materials in turning operations. How many cutting edges are available per insert? The triangular, double‑sided geometry offers multiple indexing positions; each face provides fresh cutting edges when rotated and re‑indexed. Is the insert compatible with standard ISO holders? Compatibility depends on holder form, clearance angle and tolerance class; the TNGG160402 follows ISO dimensions for triangle inserts and fits holders designed for 16 mm triangular plates with a 4.76 mm thickness. What advantage does the 0.2 mm nose radius provide? The 0.2 mm radius favours fine finishing and reduced cutting forces in light turning passes, improving surface quality and control over small radii features. Does the insert require specific clamping components? Secure clamping with the correct underlay and screw is recommended; the cylindrical hole facilitates standard clamping hardware used in ISO turning tool systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 GH330 Wendeplatten - Tungaloy
Choose the ISO-standard TNGG160402 GH330 from Tungaloy for reliable, long-running turning performance: the GH330 grade and carbide construction deliver a balanced combination of wear resistance and edge stability, while the 60° geometry and 0.2 mm corner radius enable precise form control; order directly via Metav Werkzeuge or consult the technical team for application support. TNGG160402 GH330 Tungaloy Turning Insert — ISO triangular carbide insert for turning A TNGG160402 GH330 insert designed for ISO‑standard turning operations, suited to external and internal turning with a robust double‑sided chipbreaker and a secure cylindrical through‑hole. ISO triangular insert, 60° cutting geometry Carbide grade GH330 for wear resistance Double-sided chipbreaker, with cylindrical hole 0.2 mm corner radius and 4.76 mm thickness Consistent cutting performance for demanding turning tasks The ISO‑compliant triangular insert offers stable cutting through a combination of carbide substrate and the GH330 grade, which balances wear resistance and toughness. This combination supports repeatable edge life and dimensional control in series production. Selecting the correct chipbreaker and grade ensures the cutting edge remains stable under interrupted cuts and variable feed rates, reducing scrap and increasing process reliability. Better chip control to maintain cycle times A double‑sided chipbreaker improves chip formation and evacuation, which reduces the risk of built‑up edge and tool interference with the workpiece. The integrated cylindrical hole ensures secure clamping in compatible holders and contributes to repeatable seating accuracy. Effective chip control leads directly to fewer machine stops, more consistent surface quality, and lower overall machining time per component. Simple compatibility checks for secure toolholding Compatibility with toolholders is determined by the insert’s form, relief angle, tolerance class, fastening and dimensional data. Key measurable values are the 60° cutting angle, 0° relief angle, 4.76 mm plate thickness and 16 mm nominal size; the cylindrical through‑hole and triangular shape require the corresponding ISO‑type clamp or seat. Confirming these parameters with the holder specification avoids misfits and supports process stability. Grade and material advantages for industrial use Manufactured from carbide and specified in the GH330 Tungaloy range, the insert is engineered to combine abrasion resistance with edge toughness for a broad set of turning applications. The geometry and grade pairing provides predictable wear behaviour and helps maintain surface finish within narrow tolerances. For high‑throughput environments, the insert’s design supports economical indexing and minimal handling between changes. Contact Metav Werkzeuge for tailored advice on using Tungaloy inserts in the production process and for assistance selecting the correct chipbreaker and holder compatibility; eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6808157 SKU: 6808157-Tungaloy Manufacturer SKU: TUN6808157 Model series: ISO turning indexable inserts Data Corner radius: 0.2 mm Cutting angle: 60° Plate thickness: 4.76 mm Plate size: 16 mm Relief angle: 0° Hole style: cylindrical through‑hole Special features Material: carbide Grade: GH330 Chipbreaker: double-sided Shape: triangular Application: turning ISO designation: TNGG160402 FAQ Is this insert suitable for external turning applications? Yes. The TNGG160402 GH330 Tungaloy turning insert is designed for both external and internal turning and is intended for ISO‑standard toolholders. What advantages does the GH330 grade offer for production runs? The GH330 grade provides a balance of wear resistance and toughness; this reduces flank and crater wear while maintaining cutting edge stability across medium to long production cycles. Which holder parameters must be checked for compatibility? Confirm form, relief angle, tolerance class, fastening method, plate size and thickness; matching these ensures the TNGG160402 fits securely in the intended holder. What are the key geometric specifications to verify before mounting? Check the 60° cutting geometry, 0.2 mm corner radius, 4.76 mm plate thickness and the presence of a cylindrical through‑hole for correct clamping. Is the insert indexable and suitable for quick reorientation? Yes. The insert features a double‑sided chipbreaker and a reversible design that permits indexing to present fresh cutting edges, supporting efficient wear management. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNGG 160402 GT9530 Wendeplatten - Tungaloy
Take advantage of the GT9530 coated cermet grade and ISO compatibility to achieve consistent finishing and extended tool life in stable turning setups. The triangular 60° geometry with a 0° relief angle and double-sided chipbreaker provides reliable chip control and repeatable performance; order directly via Metav Werkzeuge or consult our specialists for selection assistance. TNGG160402 GT9530 Tungaloy turning insert – ISO triangular 60° coated cermet A TNGG160402 GT9530 ISO turning insert for finishing to light universal turning, offering a coated cermet grade designed for improved surface finish and longer tool life in stable conditions Coated cermet grade GT9530 for longer life ISO triangle 60° insert, size 16 mm 0° relief angle for stable finishing passes Double-sided chipbreaker with cylindrical hole Consistent finishing and extended tool life The GT9530 is a coated cermet grade developed for wear resistance in finishing and light universal applications. Cermet is a ceramic–metal composite that combines the hardness of ceramics with the toughness of metal, which helps to maintain a sharp cutting edge and deliver a consistent surface finish over longer intervals between indexings. In practice, the result is fewer interruptions for tool changes and steadier part quality when machining steel under stable setups. The modest corner radius 0.2 mm supports fine edge definition, making the insert particularly suitable where a refined finish is required. Precision fit within ISO tooling systems Compatibility with toolholders is governed by geometric and dimensional standards; the ISO designation ensures predictable fitment when form, relief angle, tolerance class, clamping and thickness match the holder. The triangular 60° form with a cylindrical hole accommodates common clamping systems and offers three usable edges per indexable side when double-sided. Clear labelling and ISO conformity simplify inventory management and enable fast replacement without extensive setup verification, reducing downtime and supporting a smooth production flow. Practical application and machining guidance Designed for both external and internal turning operations, this insert performs best in stable machining conditions where the combination of the coated cermet body and the double-sided chipbreaker can control chips effectively. The 0° relief angle aids in finishing passes by reducing cutting forces normal to the workpiece, and the modest thickness 4.76 mm contributes to adequate rigidity in most standard holders. Select the chipbreaker and grade to match the workpiece material and process stability; the result is improved productivity through longer tool life and better repeatability. Why this insert is a productive choice Choosing an ISO-indexable turning insert with a modern coated cermet grade means prioritising process reliability and surface quality. The combination of GT9530 coating, standardised geometry and a proven triangular form translates into predictable performance and efficient tool utilisation. For workshops focused on repeatable part quality and lower tooling consumption per part, this insert offers a balanced solution that aligns with pragmatic production goals. For expert advice on integrating the GT9530 Tungaloy insert into a specific turning application, or to place an order through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6997775 Manufacturer SKU: TUN6997775 Item SKU: 6997775-Tungaloy Model series: ISO turning indexable inserts Core specifications ISO code: 160402 Insert size: 16 mm Thickness: 4.76 mm Insert angle: 60° Corner radius: 0.2 mm Materials & features Material: carbide Coating / grade: GT9530 (coated cermet) Insert form: triangular Relief angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Application: turning Compatibility: ISO holders (form, relief, tolerance, clamping, size, thickness) FAQ What materials is this insert suited for? The GT9530-coated cermet insert is intended primarily for machining steel and is described as a wear-resistant finishing to light universal grade for stable conditions. How does the ISO designation help with tool selection? ISO designation simplifies matching the insert to compatible holders; the ISO code and defined geometry reduce uncertainty when selecting clamping systems and replacement inserts. How many cutting edges are available per insert? Due to the triangular form and double-sided configuration, multiple edges can be indexed; the exact number of usable edges depends on orientation and whether both sides are utilised. What is the benefit of a 0° relief angle for finishing? A 0° relief angle reduces normal forces during finishing passes, helping to maintain surface quality while the coated cermet grade preserves edge integrity. Is the GT9530 suitable for unstable cutting conditions? The GT9530 is optimised for stable conditions; in less stable setups a more robust grade or different chip management strategy may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of the GT9530 coated cermet grade and the triangular 60° geometry for a consistent surface finish and extended tool life; the robust 0.2 mm corner radius and ISO‑compatibility reduce setup uncertainty. Order the insert directly via Metav Werkzeuge or consult the specialists for cutting data and holder compatibility. TNGG 160402 GT9530 indexable turning insert (triangular, 60°) by Tungaloy TNGG160402 GT9530 is an ISO‑standard triangular indexable turning insert designed for external and internal turning where a fine surface finish and longer tool life under stable conditions are required Coated cermet grade GT9530 for extended life Triangular ISO insert with 60° cutting angle Dual‑sided chipbreaker and cylindrical hole Precise finish on steel components Long‑lasting finishing performance with coated cermet technology The GT9530 grade is a coated cermet developed for wear resistance during finishing and light universal turning in steel. Cermet combines ceramic hardness with metallic toughness, which reduces built‑up edge formation and produces a consistently high surface quality even at typical finishing speeds. As a result, cycle times remain predictable and component rework is minimised, making the insert cost‑efficient in production environments where surface finish and tool life are priorities. ISO compatibility and secure clamping for reliable setups Designed as an ISO‑standard turning insert, the triangular geometry and defined dimensions support straightforward integration into established tooling systems. The combination of the 16 mm inscribed circle, thickness 4.76 mm, 0.2 mm corner radius and 0° clearance angle enables predictable cutting engagement. The cylindrical hole and tolerance‑defined form ensure secure clamping in compatible holders; this reduces vibration risk and improves repeatability across batches, simplifying process qualification in series production. Improved productivity through chip control and indexability The double‑sided chipbreaker offers effective chip control during light to medium finishing cuts, helping to avoid entanglement and protecting the component surface. Being indexable and double‑sided increases the number of cutting edges available per insert, which lowers tool change frequency and machine downtime. For external and internal turning operations where stability is present, this insert supports a balance of high quality and low intervention, contributing to steady productivity and fewer interruptions on the shopfloor. Request cutting data, confirm holder compatibility or order the TNGG160402 GT9530 insert from Metav Werkzeuge for fast availability and expert application advice Technical data Article number: 6997776 Manufacturer SKU: TUN6997776 Model series: ISO‑Drehwendeschneidplatten Product designation: TNGG160402 GT9530 Core specifications Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Cutting angle: 60° Clearance angle: 0° Hole: with hole (cylindrical) Design & features Triangular plate Coated cermet (GT9530) Cemented carbide body Double‑sided chipbreaker ISO turning insert Cylindrical hole for secure clamping Suitable for external and internal turning FAQ Is this insert suitable for finishing steel components? The GT9530‑grade coated cermet insert is formulated for finishing and light universal turning in steel and offers improved surface quality and wear resistance in stable machining conditions. How is the TNGG160402 clamped in a holder? The insert uses a cylindrical hole and standard ISO geometry; secure clamping depends on matching holder form, tolerance class and fastening method as specified for the ISO‑turning system. How many usable edges does the triangular, double‑sided insert provide? A triangular, double‑sided design gives multiple indexable positive edges; the exact number of edges available per insert follows the ISO geometry and the orientation of the chipbreaker. What effect does the 0.2 mm corner radius have on the finished part? A 0.2 mm corner radius helps maintain a fine surface finish while reducing stress concentration on the cutting edge, which supports longer tool life in finishing passes. Which components are typically included in a complete tool system for turning with this insert? A functional system comprises the ISO turning insert, the matching external holder or boring bar, the required clamping pad or clamp set and replacement fastening screws as needed for the holder design. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of NS520 cermet performance, ISO compatibility and a compact triangular design for reliable finishing and stable wear; order via Metav Werkzeuge or consult our specialists for application advice. TNGG160402 NS520 – ISO turning insert, triangular 16 mm, Tungaloy TNGG160402 NS520 is an ISO‑standard indexable insert developed for finishing to light turning of steel, offering high surface quality and consistent wear behaviour Cermet grade NS520 for finishing ISO-standard triangular 16 mm size 0.2 mm corner radius for precise edges Double-sided chipbreaker for economy High-precision finishing and consistent surface quality The NS520 grade is a cermet or coated cermet formulation optimised for finishing and light machining of steel, delivering improved surface quality and dimensional stability compared with conventional grades. The cutting edge geometry and substrate chemistry reduce built-up edge and promote even flank wear, which helps to maintain component tolerances over extended runs. This makes the insert particularly suited to applications where consistent cosmetic finish and repeatable form are decisive. ISO compatibility and secure clamping in common tool systems As an ISO‑standard insert, the plate’s compatibility is governed by its form, relief angle, tolerance class, fastening, size and thickness. The triangular 16 mm format with a 4.76 mm thickness and a 0° relief angle fits a wide range of external holders and boring bars designed for ISO turn‑insert systems. Typical system components comprise the insert itself, a matching external holder or boring bar, a shim/clamp set and replacement fixing screws, enabling secure clamping and repeatable seating for machining processes that demand low micro‑vibration and steady cutting conditions. Efficient chip control and economical finishing cycles The double-sided chipbreaker design supports predictable chip formation during finishing passes, aiding coolant access and reducing edge loading. With a 0.2 mm corner radius the insert balances rigidity and edge strength to allow fine finishing without sacrificing edge life. Together these features contribute to lower rework rates and improved process efficiency — an advantage in production environments where throughput and surface integrity both matter. The carbide substrate ensures the mechanical stability required for steady, repeatable cutting. Contact Metav Werkzeuge for application guidance and stock availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6808141 Manufacturer SKU: TUN6808141 Label: TNGG160402 NS520 Tungaloy Manufacturer: Tungaloy Dimensions & core data Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Relief angle: 0° Hole: with cylindrical hole Materials & special features Grade: NS520 (cermet / coated cermet) Substrate: cemented carbide Application: turning — finishing to light machining of steel Chipbreaker: double-sided Plate shape: triangular System components: matching external holder or boring bar; shim/clamp set; replacement screws FAQ Which machining tasks are best for this insert? The TNGG160402 NS520 insert is designed for finishing to light turning of steel where high surface quality and dimensional consistency are required. Can this grade be used for roughing operations? NS520 is a cermet grade optimised for finishing and light machining; for heavy roughing a more robust grade should be selected. How is compatibility with the toolholder ensured? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the ISO format and the insert’s dimensions make it compatible with standard ISO external holders and boring bars when the holder is specified accordingly. How many usable edges does the insert provide? The triangular plate offers multiple indexable edges; the double‑sided chipbreaker further enhances economical edge usage and predictable wear. Is this insert supplied with a coating? The NS520 designation indicates a cermet or coated cermet formulation; the TNGG160402 NS520 plate uses a cermet substrate optimised for finishing steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and straightforward ISO compatibility for efficient turning operations. Order the TNGG160402 NS9530 insert directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. TNGG 160402 NS9530 — Indexable turning insert for turning by Tungaloy, triangular, 60° included angle The TNGG160402 NS9530 is an ISO-standard triangular indexable insert designed for finishing turns on steels; uncoated cermet grade for continuous cuts and small depth of cut. Uncoated cermet NS9530 for fine finishing Sharp cutting edge for low cutting forces ISO triangular insert, 60° included angle Double-sided with cylindrical mounting hole High-precision finishing for steel turning The insert is based on an uncoated cermet NS9530 grade that has been developed for finishing applications on steel. The sharp cutting edge and low built-up edge tendency lead to consistently improved surface finish, particularly in continuous cutting conditions and when using small depth-of-cut strategies. As a finishing-grade solution, the substrate and edge form provide reduced cutting forces and lower vibration sensitivity, which supports repeatable part quality and less rework. Clear ISO compatibility and quick replacement The insert follows ISO geometries and is defined by shape, clearance angle, tolerance class, fastening method, size and thickness; these determine compatibility with standard toolholders. The triangular form with a 16 mm inscribed circle and 60° included angle, combined with a cylindrical centre hole and a 4.76 mm plate thickness, enables simple mounting and secure clamping in appropriately specified holders. The 0.2 mm corner radius supports fine-detail finishes while the double-sided design extends tool life and reduces inventory pressure. Productivity and process reliability in turning Using a finishing cermet insert reduces the need for secondary finishing and helps maintain cycle-time targets. The double-sided geometry and robust edge stability provide cost efficiency through multiple reindexings, while the dedicated chipbreaker supports reliable chip control during stable cutting. For external and internal turning operations where surface integrity matters, the combination of cermet edge quality and ISO-standard dimensions helps minimise tool-change downtime and contributes to predictable process output. Selecting the right grade and handling notes Cermet finishing grades deliver high wear resistance and a fine cutting edge; however, they perform best in continuous cuts and steady feed conditions. The NS9530 grade is optimised for steel finishing — operators should prefer a holder and machining setup that ensure stable cutting conditions. Compatibility checks for holder form, clamping screw and tolerance class are essential before first use. Where interrupted cuts or unstable setups occur, consider alternative grades or toolpaths adapted to the application to protect the edge integrity. Contact Metav Werkzeuge today for a tailored supply of Tungaloy cermet finishing inserts and practical advice on integrating the TNGG160402 NS9530 into existing turning processes Technical Data Article number: 6997851 Manufacturer SKU: TUN6997851 Label: TNGG160402 NS9530 Tungaloy indexable insert Model series: ISO indexable turning inserts Material: carbide Manufacturer: Tungaloy Core dimensions Size (inscribed circle): 16 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Included angle: 60° Centre hole: cylindrical Special features Uncoated cermet grade NS9530 Double-sided chipbreaker Triangular plate form With cylindrical mounting hole Designed for external and internal turning Finish grade optimised for steel ISO-standard geometry for holder compatibility FAQ Which materials is this insert intended for? The TNGG160402 NS9530 insert is formulated as a finishing grade for steel and is optimised for continuous turning operations on steel components. Is the insert reversible or single-sided? The insert is double-sided, allowing reindexing to a fresh edge and extending service life before disposal. What are the key dimensional values to check for holder compatibility? Check the triangular shape (16 mm inscribed circle), plate thickness (4.76 mm), centre-hole style (cylindrical) and the 60° included angle to ensure correct fit in ISO-compatible holders. What cutting conditions suit the NS9530 cermet grade? The NS9530 uncoated cermet is best for finishing passes with continuous cuts and small depths of cut, where low cutting forces and excellent surface finish are priorities. How does the 0.2 mm corner radius affect the finished part? A 0.2 mm corner radius supports finer profile details and smoother surface transitions, improving the final appearance and reducing the need for secondary finishing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, reduced cutting forces and consistent surface quality through the use of a specialised uncoated cermet grade. The combination of a small nose radius, ISO triangular geometry and robust clamping compatibility helps to maintain steady productivity; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific data. TNGG TNGG160402 NS9530 – Indexable turning insert with uncoated cermet and 0.2 mm nose radius, Tungaloy TNGG160402 NS9530 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised as a finishing grade for steels with continuous cuts. Uncoated cermet grade NS9530 for fine finishes 0.2 mm nose radius for precise contouring ISO triangular form TNGG160402 with hole Double-sided chipbreaker, suitable for continuous cuts Consistent finishing with low cutting forces The uncoated NS9530 grade delivers a combination of low cutting forces and high-quality surface finishes, making it suitable for finishing passes on steels where a sharp cutting edge is required. The small 0.2 mm nose radius reduces built-up edge and helps to preserve component tolerances while producing minimal vibration. For machining operations that prioritise surface integrity over heavy material removal, this insert provides a measurable advantage in process stability and repeatability. Secure fit and straightforward holder compatibility Compatibility is determined by the insert’s form, clearance angle, tolerance class, fastening and dimensions; the ISO geometry of this triangular plate ensures reliable seating in standard external holders or boring bars. The plate’s 4.76 mm thickness and 16 mm size meet ISO conventions, while the cylindrical hole and matching clamping sets or screws guarantee correct location and repeatable clamping force. This construction reduces set-up time and avoids misalignment that can compromise finish or insert life. Material scope and machining performance Although manufactured with a carbide backing for mechanical strength, the cutting grade is an uncoated cermet, optimised for steel finishing in continuous cutting conditions. The double-sided chipbreaker supports stable chip control during small depths of cut and continuous feed, helping to lower rework rates and improve throughput. The 60° insert geometry provides predictable corner behaviour and is suitable for both external profiling and internal turning tasks where a fine surface and tight dimensional control are required. Practical advantages for workshop use The indexable design allows economical rotation or replacement of cutting edges without regrinding, supporting consistent production runs and straightforward inventory management. Selecting the correct chipbreaker and grade in alignment with workpiece material and cutting parameters extends tool life and reduces downtime. Where tighter tolerances and fine surface quality are priorities, this finishing insert contributes directly to lower scrap rates and higher first-pass acceptance. Contact Metav Werkzeuge for tailored cutting data, availability of the TNGG160402 NS9530 insert and assistance with holder selection. Technical Data Article number: 6997822 Manufacturer SKU: TUN6997822 Metav SKU: 6997822-Tungaloy Designation: TNGG160402 Brand: Tungaloy Facts Nose radius: 0.2 mm Plate thickness: 4.76 mm Size: 16 mm Included angle: 60° Clearance angle: 0° Manufacturer article number: 6997822 Special features Triangular form (TNGG) Cylindrical hole Double-sided chipbreaker Uncoated cermet cutting grade NS9530 Carbide substrate Intended application: turning (external and internal) FAQ What machining tasks is this insert best suited for? The TNGG160402 NS9530 insert is optimised for finishing operations on steel in continuous cutting, offering low cutting forces and excellent surface quality. How does the NS9530 grade affect tool life and finish? The uncoated NS9530 cermet grade promotes a sharp cutting edge and low cutting forces, which typically results in superior surface finish and stable tool life in finishing applications. Which holders are compatible with this triangular ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; the ISO TNGG form fits standard triangular turning holders and boring bars when matched correctly. Can the insert be used for internal boring as well as external turning? Yes, the triangular geometry and the 60° included angle make the insert suitable for both external profiling and internal turning tasks where a finishing grade is required. What are the distinguishing geometric parameters to check before mounting? Verify the 0.2 mm nose radius, 4.76 mm plate thickness, 16 mm size, 0° clearance angle, and the presence of a cylindrical locating hole to ensure proper fit and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 NS9530 Wendeplatten - Tungaloy
A finishing insert that combines the NS9530 uncoated cermet grade with a 60° triangular ISO geometry delivers low cutting forces and excellent surface quality in turning operations; compatibility with ISO holders depends on matching shape, clearance, tolerance, clamping and thickness. Order the insert directly via Metav Werkzeuge or consult their technical team for holder compatibility and availability. TNGG 160402 NS9530 Tungaloy turning insert – ISO 60° triangle, uncoated cermet The TNGG 160402 NS9530 is an ISO-standard triangular turning insert designed for finishing steel in external and internal turning operations Finishing cermet grade NS9530 Sharp cutting edge for low cutting forces 60° triangular ISO geometry Double-sided chipbreaker with cylindrical hole High-finish turning with lower machining effort The uncoated cermet grade NS9530 is formulated for finishing operations on steel, offering a sharp cutting edge and reduced cutting forces that help achieve a superior surface finish with minimal secondary processing. In continuous cuts and small depths of cut the material combination gives consistent surface quality and predictable tool behaviour, enabling shorter cycle times and reduced hand-finishing. The result is a measurable improvement in part appearance and process efficiency with fewer downstream operations. ISO compatibility and secure clamping for repeatable results The insert follows ISO designation TNGG160402 and must be mounted in a matching ISO holder; secure fixation is determined by insert form, 0° relief, tolerance class, clamping method and plate thickness (4.76 mm). The triangular 60° geometry and cylindrical hole allow double-sided use for economical indexing. When the holder, shim and clamp set correspond to the insert’s geometry and size (16 mm), repeatable positioning and consistent cutting angles are achieved, which supports predictable cycle times and consistent part quality. Practical selection: chipbreaker and process guidance Select the chipbreaker and grade according to workpiece material, machining type and stability of the setup. The double-sided chipbreaker on this insert is designed to support controlled chip formation during finishing passes, promoting safe evacuation and stable cutting conditions. While the finishing grade performs best in continuous, light passes, stability considerations should guide feed and depth choices; in marginal setups a different chipbreaker or a more robust grade may be preferred. For complex requirements or unusual materials, technical consultation is recommended to optimise tool life and part quality. For tailored advice on holder compatibility or to order Tungaloy turning inserts such as the TNGG 160402 NS9530, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; their specialists provide availability checks and selection support. Technical data Article number: 6997836 Manufacturer SKU: TUN6997836 SKU: 6997836-Tungaloy Manufacturer: Tungaloy Core specifications ISO designation: 160402 Geometry: 60° Corner radius: 0.2 mm Relief angle: 0° Plate thickness: 4.76 mm Plate size: 16 mm Special features Uncoated cermet grade NS9530 Finishing grade for steel Sharp cutting edge, low cutting forces Double-sided chipbreaker Triangular plate with cylindrical hole Compatible with ISO holders (shape, clearance, tolerance, clamping, size) FAQ Which applications suit this insert best? The TNGG 160402 NS9530 insert is designed primarily for finishing steel in external and internal turning, especially for continuous cuts and small depths of cut. How does the NS9530 grade affect surface quality? NS9530 is an uncoated cermet finishing grade that provides a sharp edge and reduced cutting forces, supporting improved surface finish and reduced need for secondary operations on turned steel components. Is the insert indexable and economical to use? Yes, the triangular geometry with a cylindrical hole and double-sided chipbreaker allows indexable use, offering economical rotation of cutting edges and consistent positioning. What should be checked for holder compatibility? Confirm the holder matches the insert’s shape, 0° relief, tolerance class, clamping style, plate size (16 mm) and thickness (4.76 mm) to ensure secure mounting and repeatable cutting geometry. Can this grade handle interrupted cuts? The TNGG 160402 NS9530 is optimised for finishing and continuous cuts; for heavy interrupted cuts a tougher, coated grade may be more appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing, low cutting forces and ISO‑compliant geometry for stable turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for tailored advice. TNGG160402 NS9530 Tungaloy indexable insert — 60° triangle for turning The TNGG160402 NS9530 is an ISO‑compliant triangular indexable insert designed for finishing operations in turning, offering a sharp uncoated cermet grade for high surface quality. Sharp uncoated cermet grade NS9530 Triangle ISO form, 16 mm inscribed circle 60° cutting geometry for accurate turning Double-sided with cylindrical locating hole Precision finishing with a low‑force cutting edge The combination of the NS9530 grade and an uncoated cermet cutting edge delivers consistent fine finishing on steel, particularly in continuous cutting and small depths of cut. This material pairing reduces cutting forces, which in turn lowers vibration and tool deflection; the result is improved part accuracy and a superior surface finish that can reduce or eliminate downstream grinding. The insert’s geometry supports repeatable chip formation and steady tool life, helping to maintain cycle times and avoid unexpected downtime. Stable clamping and ISO compatibility for predictable results Configured in a standard ISO triangle with a 16 mm inscribed circle and 60° cutting angle, the insert mates with compatible holders when matched by form, relief angle, tolerance class, fixing method, size and thickness. The double‑sided design with a cylindrical locating hole enables economical indexing and straightforward seating in many external and internal turning toolholders. Clear geometric standards mean process planners can integrate the plate into existing tool systems with predictable clamping repeatability and minimal setup variation. Process benefits that improve shop efficiency Selecting a finishing‑grade insert such as this supports faster attainment of dimensional tolerances and reduces secondary operations; lower cutting forces translate into reduced spindle load and less thermal growth in thin parts. The sharp edge characteristic of the NS9530 grade helps achieve target surface roughness in fewer passes, producing measurable time and cost savings per component in medium to high‑volume production. These practical efficiency gains make the insert a rational choice where part quality and throughput are priorities. Recommended applications and selection guidance Intended primarily for turning of steel in finishing operations, the plate performs best with continuous feeds and modest depths of cut; choose the double‑sided chipbreaker and grade to match workpiece material, machining method and assembly stability. Compatibility is governed by shape, relief angle (0°), tolerance class, fixing and plate thickness (4.76 mm), so confirm holder match before ordering. For complex parts or mixed batches, consult technical data to select the chipbreaker and grade that balance surface quality and longevity. For precision finishing with Tungaloy’s NS9530 cermet grade, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6997850 Manufacturer SKU: TUN6997850 Our SKU: 6997850-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Facts Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Angle: 60° Clearance angle: 0° Special features Grade: NS9530 (uncoated cermet) Double-sided insert with cylindrical hole Triangle plate form Compatibility depends on form, clearance, tolerance class, fixing, size and thickness FAQ What applications suit this insert best? The TNGG160402 NS9530 insert from Tungaloy is optimised for finishing in turning, particularly continuous cuts on steel where a sharp uncoated cermet edge gives high surface quality; SKU 6997850-Tungaloy identifies this item. Can this insert be indexed to use both sides? Yes, the plate is double‑sided and can be rotated for a second cutting edge; the design includes a cylindrical locating hole for secure seating in suitably rated holders. Which materials is the NS9530 grade intended for? The NS9530 finishing grade is formulated for steel machining, delivering low cutting forces and a sharp cutting edge to achieve fine surface finishes in typical turning operations. How to ensure compatibility with a toolholder? Compatibility is determined by the insert form, relief angle, tolerance class, fixing method, size (16 mm inscribed circle) and thickness (4.76 mm); confirm these dimensions against the toolholder specification before ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, consistently low cutting forces and ISO compatibility for more productive turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. TNGG 160402 NS9530 Turning Insert (TNGG160402) – Tungaloy TNGG160402 NS9530 is a triangular ISO turning insert designed for finishing applications in metal turning, optimised for low cutting forces and high surface quality. ISO triangular insert TNGG160402 for turning NS9530 uncoated cermet finishing grade Sharp edge for low cutting forces and fine finish 0.2 mm corner radius, 60° insert angle Precision finishing for Stahl with a low-force cutting edge The NS9530 grade is an uncoated cermet developed as a finishing grade for Stahl, offering a consistently sharp cutting edge that reduces cutting forces and improves surface quality. In practice, that means smoother part surfaces and less requirement for secondary finishing. The combination of the fine-edge cermet and the 0.2 mm corner radius favours continuous cuts and small depths of cut, making the insert particularly suited to light-finishing passes where dimensional accuracy and surface integrity are critical. Reliable fit and predictable performance with ISO compatibility The insert conforms to the ISO-series geometry so compatibility with ISO holders is straightforward; fit is determined by shape, clearance angle (0°), tolerance class, clamping method, size and thickness. The triangular shape and 60° included angle provide three usable cutting edges per indexable insert, improving economy in batch production. Specifying an ISO-standard insert reduces setup uncertainty and supports repeatable mounting, which in turn shortens machine downtime and standardises tool inventory across different turning centres. Process advantages: surface finish, chip control and economy A finishing-grade cermet like NS9530 delivers low built-up edge tendency and good micro-geometry retention, which contributes directly to high surface finish and improved dimensional stability. The double-sided chipbreaker supports consistent chip formation in finishing cuts, while the presence of a cylindrical hole ensures secure clamping and repeatable seating. Together these attributes improve process reliability and the lifetime economy of the tool, especially in production environments where component consistency and high throughput are priorities. For application advice or to secure the Tungaloy TNGG160402 NS9530 insert for precision finishing on Stahl, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability. Technical data Article number: 6997837 SKU: 6997837-Tungaloy Manufacturer SKU: TUN6997837 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Insert angle: 60° Clearance angle: 0° Special features Material: hardmetal Grade: NS9530 (uncoated cermet) Shape: triangular Hole: with hole, cylindrical hole Chipbreaker: double-sided Typical application: turning, finishing on Stahl FAQ What cutting tasks is this insert best suited for? This triangular insert in grade NS9530 is intended primarily for finishing operations on Stahl where a sharp edge and fine surface quality are required; it excels in continuous cuts and small depths of cut. How many usable edges does the insert provide? The triangular geometry offers three usable cutting edges per indexable insert; the ISO geometry and cylindrical hole ensure repeatable reclamping and stable performance. Is the NS9530 grade coated? No, NS9530 is supplied as an uncoated cermet finishing grade designed for low cutting forces and improved surface finish in Stahl turning. What are the key dimensions to check for holder compatibility? Verify insert size (16 mm), thickness (4.76 mm), shape (triangular), clearance angle (0°) and the presence of the cylindrical hole; compatibility depends on form, tolerance class, clamping and dimensions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 SH725 Wendeplatten - Tungaloy
Benefit from stable cutting performance, consistent edge life and ISO compatibility for reliable turning operations; the combination of a coated carbide SH725 grade, a 0.2 mm corner radius and a standard triangular geometry supports productive machining and predictable tool life. Order the insert directly via Metav Werkzeuge or consult their team for application advice. TNGG 160402 SH725 – Tungaloy Turning Insert (ISO triangular, 60°) A TNGG160402 SH725 indexable turning insert engineered for general external and internal turning where stable cutting edges and adaptable chip control are required. ISO-compliant triangular insert SH725 coated carbide grade 0.2 mm corner radius for precision Double-sided chipbreaker, cylindrical hole Proven cutting stability for variable engagements The insert delivers consistent edge life through the SH725 coated carbide grade, which is formulated for toughness and edge stability in turning applications. In practice, this means fewer unexpected tool changes during mixed or interrupted cuts and a more predictable production rhythm. The combination of coating and substrate offers a balance between wear resistance and resistance to chipping, making it suitable for smaller tools and changing entry conditions. Simple mating with ISO-compatible holders Designed as an ISO turning insert, the geometry and hole style ensure compatibility with a broad range of external holders and boring bars. Holder fit is determined by form, relief angle, tolerance class, fastening and thickness; the listed ISO designation 160402 and the 4.76 mm thickness allow straightforward selection of a matching carrier. This compatibility reduces setup time and supports a modular tooling strategy in the workshop. Precision geometry for repeatable finishes The 60° triangular shape with a 0.2 mm corner radius supports accurate profile control on turned parts while allowing multiple indexing positions per insert. The small corner radius is advantageous for fine finishing and close-tolerance work, helping to maintain surface quality without overloading the tool edge. For customers requiring repeatable component quality, this geometry combines flexibility with predictable dimensional results. Effective chip control and secure clamping Equipped with a double-sided chipbreaker and a cylindrical hole, the insert promotes stable chip formation across a range of feed rates and materials. The hole style facilitates positive clamping and quick plate exchanges, while the chipbreaker design reduces the risk of long, stringy chips that can interrupt automated processes. These features together contribute to smoother production flow and reduced machine downtime. Material coverage and recommended uses The substrate and coating are tuned for general turning operations; the grade is particularly suited where toughness and reliable edge retention are priorities. Typical uses include external and internal turning on medium-strength materials where insert robustness is required rather than aggressive high-speed removal. The plate works well where variable engagement or intermittent cuts demand a resilient cutting edge. Practical guidance for selection and setup When integrating this insert into a tooling system, match the insert form, angle and thickness to the chosen holder and select a chipbreaker and grade that correspond to workpiece material and machining stability. For specific workpiece materials or to confirm compatibility with a particular holder, consult the technical advisors or request the relevant holder data sheet for confirmation before production runs. For high-reliability turning with Tungaloy SH725 inserts, contact Metav Werkzeuge to confirm holder compatibility and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6737213 Manufacturer SKU: TUN6737213 Stock SKU: 6737213-Tungaloy Model series: ISO turning indexable inserts Material: Coated carbide (hardmetal) Facts ISO designation: 160402 Insert designation: TNGG160402 Shape: triangular Size: 16 mm Thickness: 4.76 mm Relief angle: 0° Included hole: with hole (cylindrical) Cutting angle: 60° Corner radius: 0.2 mm Coating/grade: SH725 Intended use: turning Special features Double-sided chipbreaker Cylindrical hole for secure clamping Coated carbide substrate for edge stability ISO-compliant geometry for holder compatibility Suitable for varying engagement and small-tool applications FAQ What materials is this insert suitable for? The TNGG160402 SH725 turning insert is designed as a general-purpose solution; the SH725 coated carbide grade provides toughness and edge stability for many common turning applications, particularly where variable engagement occurs. How is the insert mounted and clamped? The insert uses a cylindrical hole and standard ISO triangular form; clamping relies on the matched holder pocket and fastening hardware specified for the ISO 160402 family. Can the insert be indexed for multiple cutting edges? Yes. The triangular geometry permits indexing of multiple edges; the double-sided chipbreaker extends the number of usable cutting edges, improving economy per plate. What does the 0.2 mm radius mean for finish and strength? A 0.2 mm corner radius offers a compromise between fine finishing capability and sufficient edge strength for light to medium turning operations, helping to achieve consistent surface quality without fragile edges. Is this an original Tungaloy product and how to order? This is an original Tungaloy indexable insert (SKU 6737213-Tungaloy). Orders and further compatibility advice can be arranged through Metav Werkzeuge or via the contact details provided in the product listing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 SH725 Wendeplatten - Tungaloy
Benefit from the combination of a stable cutting edge, the SH725 coated carbide grade and precise ISO compatibility for consistent turning performance; order directly via Metav Werkzeuge or request application advice from our consultants. TNGG 160402 SH725 Tungaloy turning insert — triangular ISO insert with double-sided chipbreaker TNGG160402 SH725 Tungaloy indexable insert is an ISO-standard triangular turning insert engineered for external and internal turning in varying engagement conditions. SH725 coated carbide grade ISO 160402 triangular form Double-sided chipbreaker Increased process reliability through material and grade selection The TNGG160402 SH725 is manufactured from coated carbide, delivering a reliable cutting edge and extended tool life under fluctuating cutting conditions. The SH725 grade is designed to combine edge toughness with wear resistance, which reduces unexpected interruptions and regrinds. For operations where tool life and repeatability matter, the coated substrate provides a predictable performance window, enabling fewer tool changes and steadier cycle times. Compatibility that simplifies tooling choices and reduces downtime ISO compliance ensures the triangular insert mates with holders when form, relief angle, tolerance class, clamping and thickness match. The insert is intended for use with a matching external holder or boring bar, plus a support shim, clamping set and spare fixing screws as part of the system. Specifying the correct holder geometry and recognising the 0° relief angle avoids assembly errors; this clarity prevents mismatches that otherwise cause vibration, poor surface finish or premature edge failure. Practical advantages for small tools and variable cutting conditions With a 0.2 mm corner radius and double-sided chipbreaker, the insert supports finishing and light roughing in compact toolholders and situations with changing depths of cut. The triangular form and double-sided design make the insert economical: both cutting edges can be indexed, lowering cost per edge. The moderate included angle and 4.76 mm thickness yield a stable seat in the clamp, while the cylindrical hole provides secure fastening and repeatable positioning. These characteristics suit batch production and mixed-series turning where adaptability and reliable surface quality are required. For dependable turning results choose the SH725 grade from Tungaloy and contact Metav Werkzeuge for tailored application guidance and order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6737217 Manufacturer SKU: TUN6737217 SKU: 6737217-Tungaloy Name: TNGG160402 SH725 Tungaloy indexable insert Facts Inscribed circle (IC): 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Relief angle: 0° Special features Coated carbide grade SH725 Triangular form Double-sided chipbreaker Cylindrical hole ISO turning indexable inserts Application: turning Compatibility defined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The TNGG160402 SH725 insert is a coated carbide grade designed for a broad range of turning tasks; the SH725 grade offers toughness and wear resistance suitable for varied steels and general turning applications. How is the insert secured in the holder? This triangular insert features a cylindrical hole and is clamped into a matching external holder or boring bar; the system typically uses a support shim, clamping set and fixing screws for repeatable positioning. How many cutting edges are available per insert? The double-sided chipbreaker and triangular geometry provide multiple indexable edges on the insert, enabling economical use by rotating to fresh edges when required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 SH725 Wendeplatten - Tungaloy
Take advantage of a robust combination of coated carbide SH725 for edge stability, a 60° triangular geometry with 0.2 mm corner radius for versatile turning, and a double‑sided design that reduces tooling costs; order the insert directly via Metav Werkzeuge or consult our advisers for application support. TNGG 160402 SH725 indexable turning insert by Tungaloy — triangular 60° geometry for turning TNGG160402 SH725 is an ISO‑standard triangular indexable insert designed for general turning applications, offering a tough, edge‑stable grade suited to smaller tools and variable engagement conditions. ISO triangular insert, 16 mm size Coated carbide grade SH725 60° cutting angle, 0° relief Double-sided with cylindrical hole Consistent performance under varying engagement The SH725 grade is a coated carbide formulation developed for edge stability and reliable performance where cutting conditions fluctuate. Its composition provides a balance between toughness and wear resistance, which helps to maintain a predictable tool life even with intermittent engagements. For production environments that switch between short and longer cuts, this grade reduces the frequency of breakages and unscheduled tool changes, supporting more consistent cycle times and lower scrap rates. Geometry that simplifies setup and improves stability A 60° triangular insert offers good versatility for external and internal turning and is compatible with a wide range of ISO toolholders when matched by form, clearance angle and clamping. The insert’s 0° relief and 0.2 mm corner radius contribute to controlled cutting edge contact and reduced vibration in light to moderate cuts. These geometry choices result in improved surface finish and fewer reworks, while the standardised shape accelerates fixture selection and changes on multi‑machine lines. Cost-effective use and straightforward maintenance The double‑sided design doubles the number of usable edges per insert, lowering unit tooling costs and simplifying inventory management. As an ISO indexable system, it integrates with standard holders, shims and clamping sets, allowing quick replacement and minimal downtime. The presence of a cylindrical hole supports precise location on the holder and secure fastening, ensuring repeatable positioning and reliable clamping force during high‑speed rotations. Practical guidance for application and chip control For turning operations, choose the chipbreaker and grade that match the workpiece material and the machining strategy; the present insert is optimised for variable engagement and frequent edge contact changes. The doppelseitig (double‑sided) chipforming design aids chip control in common turning tasks, while the ISO conformity ensures predictable fitting. When in doubt about holder compatibility—consider form, relief angle, tolerance class, fixation, size and thickness to ensure correct seating and safe operation. For tailored advice on the TNGG 160402 SH725 insert or to confirm suitability for a specific turning task, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide prompt, application‑oriented support. Technical data Article number: 6734049 Manufacturer SKU: TUN6734049 SKU: 6734049-Tungaloy Brand: Tungaloy Model series: ISO indexable turning inserts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Cutting angle: 60° Relief angle: 0° Material: carbide Grade/coating: SH725 (coated carbide) Shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Application: turning Compatibility: ISO‑standard insert — holder fit depends on form, relief, tolerance, fixation, size and thickness FAQ What materials is this insert intended for? The TNGG 160402 SH725 insert is specified for turning applications where a tough, edge‑stable coated carbide is required; chipbreaker selection should match the workpiece material and machining method. How many usable edges does the insert provide? Thanks to its double‑sided design, the insert offers multiple usable cutting edges, which effectively reduces cost per edge for the TNGG 160402 SH725. Will this insert fit standard ISO holders? Yes — the insert follows ISO indexable insert conventions; correct fitting of the TNGG 160402 SH725 depends on matching form, relief angle, tolerance class, fixation, size and thickness with the chosen holder. What are the key geometry benefits for surface finish? The 60° triangular geometry, 0.2 mm corner radius and 0° relief provide stable edge contact and reduced vibration in many turning tasks, supporting improved surface quality and dimensional consistency. How should chip control be addressed with this grade? Select a chipbreaker compatible with the intended feed and material; the TNGG 160402 SH725’s double‑sided chipforming geometry assists chip control in typical turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 SH725 Wendeplatten - Tungaloy
Benefit from the combination of a tough, edge‑stable SH725 grade and ISO‑compliant TNGG geometry for consistent turning performance; order directly via Metav Werkzeuge or consult our specialists for application advice. TNGG 160402 SH725 ISO turning insert (triangular, 60°) by Tungaloy TNGG 160402 SH725 is an ISO‑standard triangular insert engineered for external and internal turning where steady edge life and reliable chip control under varying engagement conditions are required. Coated carbide SH725 for robust edge life Triangular 60° geometry, 0.2 mm radius Double‑sided chipbreaker for flexible use ISO‑compliant geometry for common holders Longer, more reliable edge life under variable engagement The SH725 grade is a coated carbide formulation designed to maintain cutting‑edge integrity when cutting conditions change, such as varying depth of cut or interrupted cuts. That toughness translates to fewer insert changes and steadier component quality in small‑tool setups; the result is reduced downtime and predictable tool performance. The coating improves wear resistance while the substrate resists chipping, so the user benefits from a balance of durability and economy. Predictable geometry for consistent surface finish A triangular insert with a 60° included angle and a 0.2 mm nose radius provides a good compromise between versatility and precision. The defined geometry supports repeatable cutting paths and predictable forces, which helps to achieve consistent surface quality on turned parts. The 4.76 mm thickness and standardised ISO form also contribute to dimensional stability in the holder, making depth‑of‑cut and feed calculations straightforward for process planning. Practical handling and system compatibility for workshop use The insert is double‑sided and comes with a cylindrical hole, enabling stable clamping and economical indexability. Compatibility with a wide range of ISO holders is determined by insert shape, clearance angle, tolerance class, attachment method, size and thickness; this indexable plate fits common turning systems when those parameters match. Choosing the correct chipbreaker and grade for the workpiece material and machining strategy will ensure efficient chip control and consistent machining results. Contact Metav Werkzeuge for application recommendations and to order Tungaloy’s TNGG 160402 SH725 turning insert; our experts will advise on holder compatibility and the optimal chipbreaker for the intended operation. Technical data Article number: 6737223 SKU: 6737223-Tungaloy Manufacturer SKU: TUN6737223 Name: TNGG160402 SH725 Tungaloy insert Description: ISO‑standard triangular turning insert Core data Insert size: 16 mm Thickness: 4.76 mm Nose radius: 0.2 mm Included angle: 60° Special features Coating / grade: SH725 Material: coated carbide Chipbreaker: double‑sided Shape: triangular Hole style: cylindrical hole Clearance angle: 0° Application: turning (external and internal) ISO‑standard geometry for compatible holders FAQ What applications suit this insert best? The TNGG 160402 SH725 insert is designed for general external and internal turning where a tough, edge‑stable grade and reliable chip control are required. Is the insert indexable and economical to use? Yes, the TNGG160402 is double‑sided and indexable; flipping to the second cutting edge extends service life and improves cost efficiency. What are the key dimensions to consider for holder selection? Key dimensions are 16 mm size, 4.76 mm thickness, 0.2 mm nose radius and 60° included angle; these determine correct seating and compatibility with ISO holders. Does the SH725 grade suit interrupted cuts or variable engagement? The SH725 coated carbide grade is formulated for tough, edge‑stable performance and is particularly suited to smaller tools or conditions with changing engagement. How is holder compatibility established for this insert? Compatibility is determined by insert shape, clearance angle, tolerance class, attachment, size and thickness; matching these parameters ensures secure clamping and correct tool geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 SH725 Wendeplatten - Tungaloy
Take advantage of a robust combination of productivity and edge stability: the SH725 grade provides a tough, edge‑stable performance while the triangular 60° geometry and 0.2 mm corner radius ensure accurate, repeatable indexing for efficient turning cycles; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNGG 160402 SH725 Tungaloy indexable turning insert — triangular 60° geometry A TNGG160402 SH725 indexable turning insert for ISO‑standard turning, designed for external and internal turning where reliable edge life and quick indexing are required TNGG ISO triangular insert, 60° geometry SH725 coated carbide for edge stability Double-sided chipbreaker for versatility Central cylindrical hole for secure clamping Delivering consistent productivity for turning operations The 60° triangular geometry combined with a corner radius 0.2 mm provides a balance between cutting strength and fine surface finish, making the insert suitable for both finishing and light to medium roughing tasks. As an indexable insert, the component offers four cutting edges per insert in a compact footprint, which reduces tool changes and keeps cycle times low. The design of the geometry and the standard ISO dimensions also support predictable rigidity and straightforward toolpath programming, resulting in measurable throughput gains on production lathes and CNC turning centres. Stable cutting edge and reliable chip control for varied conditions The SH725 grade denotes a coated carbide composition engineered for toughness and stable cutting edges under fluctuating engagement conditions. The double-sided chipbreaker improves chip formation and evacuation, which lowers the risk of built-up edge and helps maintain consistent surface quality. In practice this means longer intervals between indexing, fewer interruptions for clearance, and a steadier process window when machining short runs or mixed batches. The coating enhances wear resistance and contributes to repeatable tool life on small‑scale holders and in operations with variable cut depths. Secure mounting and compatibility guidance for holder selection A central cylindrical hole enables positive clamping and simple orientation in compatible ISO turn holders or boring bars. Compatibility with a given toolholder is determined by insert shape, relief angle, tolerance class, fastening method, size and thickness — the insert ships in the ISO series intended for matched holders, underplates and clamping sets. The insert thickness of 4.76 mm and the 16 mm inscribed circle are standard dimensions that ease holder selection. For system integrity, use the specified underlay/klemmsatz and replacement screws that correspond to the holder manufacturer’s clamping specification. For dependable turning performance from Tungaloy’s SH725 grade and to ensure the right holder and clamping are selected, contact Metav Werkzeuge for product advice or to request a tailored order: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6737220 Manufacturer SKU: TUN6737220 Metav SKU: 6737220-Tungaloy Model series: ISO turning indexable inserts Name: TNGG160402 SH725 Facts Inscribed circle (size): 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Geometry angle: 60° Relief angle: 0° Central hole: cylindrical Chipbreaker: double-sided Special features Grade/coating: SH725 (coated carbide) Material: carbide Shape: triangular Application: external and internal turning Compatibility determined by shape, relief angle, tolerance class, fastening, size and thickness System components: ISO insert, matching external holder or boring bar, underlay/clamping set and replacement screws Intended for applications with changing engagement conditions and for use with smaller tool assemblies FAQ What turning operations is this insert intended for? The insert is designed for external and internal turning; the TNGG160402 SH725 insert from Tungaloy suits finishing and light to medium roughing tasks on ISO‑configured toolholders. What does the SH725 designation mean for cutting performance? SH725 denotes a coated carbide grade that emphasises toughness and cutting‑edge stability, providing consistent performance under varying engagement conditions for the TNGG160402. How is the insert fixed in the holder? Fixing is via a central cylindrical hole with standard clamping hardware; compatibility is defined by insert form, relief angle, tolerance class, fastening method, size and thickness, so matching holder and clamping parts are essential. What are the key dimensions to check before ordering? Key dimensions are: inscribed circle 16 mm, thickness 4.76 mm, corner radius 0.2 mm, 60° triangular geometry and 0° relief angle; reference the manufacturer SKU TUN6737220 when specifying. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of an uncoated carbide cutting edge, compact triangular form and stable clamping to achieve reliable finishing on non‑ferrous components; the double‑sided chipbreaker and indexable design reduce tooling costs and extend productive uptime. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored holder recommendations. TNGG 160402 TH10 ISO turning insert for turning applications — Tungaloy TNGG160402 TH10 is a triangular ISO turning insert designed for external and internal turning, offering a 60° geometry for versatile contouring and finishing. Triangular ISO insert, 60° included angle Uncoated carbide grade TH10 for clean surfaces 0.2 mm nose radius for precise contours Double-sided chipbreaker with centred hole Consistent performance for ISO turning systems The TNGG160402 TH10 insert is manufactured to ISO form and tolerance standards, ensuring predictable interchangeability within an indexable turning system. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness; this standardisation simplifies tool management in serial production and reduces setup time. The triangular format with a 60° included angle supports both external profiles and internal work when combined with the correct holder, yielding repeatable results across batches. Low cutting force and improved surface quality for non‑ferrous work The uncoated carbide grade TH10 is developed for operations where a sharp, uncoated cutting edge lowers cutting forces and promotes clean surfaces. This makes the insert particularly suitable for aluminium alloys, brass and other non‑ferrous materials where adhesion or built‑up edge can impair finish. Reduced cutting resistance often translates into shorter cycle times and less spindle load, delivering a clear rational benefit for production environments focused on throughput and consistent part quality. Rigidity, chip control and secure clamping for predictable results Key geometry and mechanical features—0.2 mm nose radius, 4.76 mm thickness and a double‑sided chipbreaker—support dimensional stability and controlled chip formation. The insert’s centred cylindrical hole provides secure clamping in compatible ISO holders and helps maintain repeatable position and cutting edge alignment. Together, these attributes reduce vibration and tool deflection, improving surface finish and extending usable edge life; the double‑sided design furthermore offers multiple indexed edges for economical use. For precision turning of non‑ferrous components, choose the TH10 grade from Tungaloy and contact Metav Werkzeuge for matching holders and clamping sets to ensure optimal system performance Technical data Article number: 6808159 Manufacturer SKU: TUN6808159 SKU: 6808159-Tungaloy Brand: Tungaloy Model series: ISO turning inserts Core data Insert size: 16 mm Thickness: 4.76 mm Nose radius: 0.2 mm Included angle: 60° Relief angle: 0° Hole: cylindrical Features / Applications Material: carbide (uncoated) Grade: TH10 Shape: triangular Chipbreaker: double-sided Application: external and internal turning System components: indexable insert, holder, underlay/clamping set, replacement screws Suitable for: non‑ferrous materials and operations requiring low cutting forces FAQ What materials is this insert designed for? The TNGG160402 TH10 insert and its TH10 carbide grade are optimised for non‑ferrous materials such as aluminium and brass, and for applications where a sharp, uncoated edge improves surface finish. Can the insert be used for finishing passes? Yes. The 0.2 mm nose radius and the insert’s stable geometry make it suitable for finishing and light profiling operations when combined with the appropriate holder and cutting parameters. How is the insert clamped in the holder? The insert features a centred cylindrical hole for mechanical fastening; compatibility is ensured by matching the insert form, clearance angle, tolerance class, fastening method, size and thickness to the chosen ISO holder. Does the design improve tooling economy? The double‑sided chipbreaker and indexable triangular format provide multiple usable edges, allowing economical edge changes and lower per‑part tooling costs when used as part of a complete insert and holder system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp uncoated TH10 grade for low cutting forces, and a double-sided design that reduces tooling costs; order directly via Metav Werkzeuge or consult the Metav team for application advice. TNGG 160402 TH10 Tungaloy turning insert (ISO turning insert) The TNGG160402 TH10 is an ISO-standard triangular indexable insert intended for external and internal turning, offering a sharp, uncoated cemented carbide grade that supports clean surface finishes on non-ferrous materials. TNGG160402 triangular insert, 16 mm Uncoated carbide grade TH10 for low cutting forces Double-sided chipbreaker with 0° relief Cylindrical hole for secure clamping Predictable seating and trouble-free holder compatibility The ISO-standard geometry of this triangular insert ensures repeatable seating and interchangeability in compatible holders. With a defined form and tolerance class, the design reduces setup time and supports consistent part quality during batch production. The cylindrical hole and standard clamping parameters permit secure fixation, while the 0° relief and established flank angle contribute to stable contact and predictable wear behaviour across repeated re-indexing. Low cutting forces and clean finish for non-ferrous turning Made from cemented carbide and supplied in the TH10 uncoated grade, the insert is optimised for applications where low cutting forces and bright surfaces are required. An uncoated cutting edge minimises built-up edge formation on soft or ductile materials, enabling smoother chip formation and reduced secondary operations. The combination of double-sided chipbreaker geometry and a 0.2 mm corner radius supports consistent chip control and a controlled metal flow, which helps achieve the intended surface integrity with fewer passes. Economical indexability and process reliability The triangular format with two usable cutting edges per side offers economical tool usage and straightforward edge changes, lowering tooling costs per component. Key dimensions such as 16 mm size and 4.76 mm thickness provide sufficient edge support for a range of turning tasks while keeping rigidity high. For best results, match the chipbreaker and grade to the workpiece material and machining stability; the insert’s universal character makes it suitable for a broad set of turning operations when paired with an appropriate external holder or boring bar. Contact Metav Werkzeuge for tailored recommendations on holders and cutting data, or request application support to ensure the TNGG 160402 TH10 insert meets specific process requirements. Technical data Article number: 6808143 Manufacturer SKU: TUN6808143 Supplier SKU: 6808143-Tungaloy Material: cemented carbide Grade: TH10 ISO designation: TNGG160402 Key measurements Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Relief angle: 0° Features & compatibility Triangular insert, double-sided chipbreaker Cylindrical hole for clamping ISO-standard turning insert series Suitable for external and internal turning Optimised for non-ferrous and low-force applications Compatibility determined by holder form, free angle and tolerance class FAQ What materials is this insert best suited for? The TNGG160402 TH10 insert is tailored to non-ferrous materials and applications requiring low cutting forces; the uncoated TH10 grade helps deliver clean surfaces on ductile materials. How many usable cutting edges does the insert provide? With a triangular shape and double-sided chipbreaker, the insert offers multiple indexable edges, enabling economical re-use of cutting corners before disposal. Is the insert compatible with standard ISO turning holders? Yes; the insert follows ISO geometry standards, but compatibility depends on holder form, free angle, tolerance class and clamping size—select a holder matching those parameters. What benefit does the uncoated grade offer compared with coated grades? The uncoated TH10 grade reduces the tendency for built-up edge on soft materials and lowers cutting forces, which can improve surface finish and reduce secondary finishing. Does the insert include a central hole and what type is it? The insert has a central cylindrical hole to permit secure clamping in appropriately designed holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a sharp uncoated carbide grade and a secure central clamping for consistent turning results; order directly via Metav Werkzeuge or contact the consultants for application advice. TNGG160402 TH10 Tungaloy turning insert — triangular 60° indexable insert by Tungaloy TNGG160402 TH10 Tungaloy is an ISO‑standard triangular indexable insert for precision turning, designed for external and internal operations where low cutting forces and clean surface finish are required. ISO‑standard triangular turning insert, 60° Uncoated carbide grade TH10 for non‑ferrous Dual‑sided chipbreaker for stable cutting Central cylindrical hole for secure clamping Consistent machining with a sharp, uncoated grade The TNGG160402 TH10 Tungaloy insert is manufactured from cemented carbide and supplied in an uncoated form to deliver low cutting forces and a clean surface finish when machining non‑ferrous materials. An uncoated specification reduces built‑up edge on soft alloys and promotes predictable flank wear, which translates to fewer interruptions for tool changes and improved process stability. The graded composition of TH10 is optimised for versatile use in general turning where sharp cutting edges and smooth chip flow are priorities. Secure seat and predictable edge behaviour for reliable cuts The triangular geometry with a nominal 60° included angle, a 0.2 mm corner radius and a cylindrical central hole ensures stable positioning and repeatable indexing in compatible holders. The plate thickness of 4.76 mm contributes to rigidity under cutting loads and helps maintain cutting edge integrity. Compatibility with a holder is determined by form, rake angle, tolerance class, fastening method, size and thickness; when these parameters match, secure clamping and consistent orientation are achieved, reducing vibration and improving dimensional accuracy. Practical system integration and application guidance This ISO‑norm insert is intended for turning tasks, both external and internal, and is typically used with a matching external holder or boring bar together with a shim/clamping set and replacement screws. The double‑sided chipbreaker provides controlled chip formation on both usable sides, aiding chip evacuation and preventing entanglement in long turning operations. Selection of the appropriate chipbreaker and grade should be guided by the workpiece material, machining strategy and machine stability to maximise tool life and surface quality. For technical specification confirmation or to place an order for Tungaloy TH10 inserts, contact Metav Werkzeuge for tailored advice and availability — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6808150 Manufacturer SKU: TUN6808150 Brand: Tungaloy Specifications Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Rake angle: 0° Features Material: cemented carbide Grade: TH10, uncoated Shape: triangular Hole: cylindrical central hole Chipbreaker: double‑sided Application: turning (external and internal) FAQ What materials is this insert suitable for? The TNGG160402 TH10 insert is intended primarily for non‑ferrous materials; the TH10 grade supports low cutting forces and a clean finish when machining aluminium alloys and similar workpiece materials. How is the insert secured in the holder? The triangular plate uses a cylindrical central hole for clamping; when mounted in a compatible holder with matching form and tolerance, the insert is held securely for stable turning operations. How many cutting edges are available per insert? The triangular geometry provides multiple usable sides; the double‑sided chipbreaker enables indexing of the cutting edges to extend tool life under proper clamping and handling. Which system components are required to use the insert? A complete setup includes an ISO‑compatible insert, a matching external holder or boring bar, a shim/clamping set and replacement screws to ensure correct seating and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160402 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of TH10 uncoated carbide and a triangular ISO geometry with a 0.2 mm nose radius for efficient, low-force turning of non-ferrous materials; order directly via Metav Werkzeuge or consult our technical team for application guidance. TNGG 160402 TH10 Tungaloy indexable insert for turning The TNGG160402 TH10 is an ISO‑standard triangular indexable insert designed for turning applications, offering a sharp uncoated cutting edge suited to non‑ferrous materials and operations requiring low cutting forces and clean surface finishes. ISO triangular insert, 16 mm size Uncoated carbide grade TH10 Double-sided chipbreaker for versatility Cylindrical hole with 0° clearance Consistent cutting performance for low‑force turning The triangular ISO geometry combined with uncoated carbide in grade TH10 provides a balance between chip control and low cutting forces, making it appropriate for delicate turning tasks. The 0.2 mm nose radius supports fine surface quality while the double-sided chipbreaker allows economical indexability. This configuration reduces cutting resistance and contributes to stable metal removal in applications where a clean finish is essential. The paragraph explains how the material and geometry translate into predictable machining outcomes for production environments. Predictable fit and secure clamping for ISO holders Compatibility with toolholders is governed by insert form, relief angle, tolerance class, fastening, size and thickness. The triangular shape and cylindrical hole ensure repeatable seating in standard ISO turning holders and boring bars, while the 4.76 mm thickness and 0° clearance angle support robust clamping and radial stability. For workshop planning, the system comprises the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws, ensuring a complete, serviceable tooling solution that integrates with common turning systems. Application range and economical advantages of the TH10 grade The TH10 grade was developed as a sharp universal option for non‑ferrous materials and for operations where an uncoated cutting edge reduces cutting forces and improves surface integrity. With double‑sided indexing, each triangular insert maximises usable edges, contributing to lower tooling cost per component. When tighter tolerances or different material families are required, selecting a chipbreaker and grade matched to the workpiece and machining stability will ensure the best balance between tool life and part quality. The description highlights how the insert fits into practical workflows while maintaining efficient production. For reliable supply and application advice on Tungaloy TH10 inserts, contact Metav Werkzeuge for technical consultation and current availability: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6808153 Manufacturer SKU: TUN6808153 Stock SKU: 6808153-Tungaloy Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: cemented carbide Core data ISO designation: 160402 Size: 16 mm Thickness: 4.76 mm Nose radius: 0.2 mm Relief angle: 0° Included angle: 60° Special features Geometry: triangular Grade: uncoated carbide TH10 Chipbreaker: double‑sided Hole style: cylindrical hole Application: turning System assembly: insert + external holder/boring bar + shim/clamp + replacement screws Compatibility note: fit determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The TNGG160402 TH10 insert is designed primarily for non‑ferrous materials and for operations where an uncoated edge supports low cutting forces and a clean surface finish. What does the designation TNGG160402 indicate? TNGG denotes the triangular insert form; the ISO designation 160402 refers to size and geometry parameters, and the suffix reflects the specific dimensions and corner radius. Is the insert reversible and how many edges are available? The insert features a double‑sided chipbreaker and triangular geometry, allowing multiple indexable cutting edges to be used before replacement. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the insert is intended for standard ISO turning holders and boring bars that match these parameters. What are the key dimensional values to check before ordering? Check the ISO designation 160402, the 16 mm size, 4.76 mm thickness, 0.2 mm nose radius and the 0° relief angle to ensure correct fit and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNGG 160402 X407 Wendeplatten - Tungaloy
Benefit from the combination of a triangular ISO geometry, the X407 Tungaloy carbide grade and a 0.2 mm corner radius to achieve reliable edge stability and consistent turning results; order directly via Metav Werkzeuge or consult our application specialists for matching holders and process settings. TNGG 160402 X407 Tungaloy indexable insert — triangular ISO turning insert, 60° The TNGG160402 X407 is a triangular ISO indexable turning insert designed for both external and internal turning, offering a balanced mix of wear resistance and toughness for general turning operations. Triangular insert, 60° included angle Carbide grade X407 for balanced wear 0.2 mm corner radius for fine profiling Double-sided chipbreaker, with cylindrical hole Precision and consistent cutting performance for productive turning The ISO-designated triangular insert is engineered to deliver repeatable results in standard turning tasks. The combination of a 60° included angle and a 0.2 mm corner radius provides a stable cutting edge for fine profiling and contour work, while the X407 carbide grade balances hardness and toughness to extend edge life under varying cutting conditions. Using an indexable insert with these properties reduces interruptions for tool changes and supports continuous production, translating into measurable productivity gains and predictable cycle times. Secure seating and compatibility reduce set-up time Compatibility with holders is determined by form, clearance angle, tolerance class, fastening, size and thickness; the insert’s cylindrical hole and 4.76 mm thickness ensure reliable clamping and mechanical stability in the seat. The specified free clearance angle (0°) refers to the relief behind the cutting edge and affects contact with the workpiece; correct matching avoids rubbing and minimises vibration. This mechanical clarity makes it easier to select a suitable external holder or boring bar and helps achieve improved surface finish and reduced tool chatter during turning. Chip control and material versatility for safer production A double-sided chipbreaker gives flexibility: the insert can be indexed to present a fresh edge and allows chip formation suited to a range of cutting depths and feeds. The X407 grade complements the geometry by prioritising a balance of wear resistance and edge stability, making the insert suitable for a wide variety of steels and common shop materials encountered in turning. Selecting the appropriate chipbreaker and cutting parameters helps maintain process security and repeatability, delivering consistent component tolerances and fewer rejects. For application-specific advice and to secure the Tungaloy TNGG160402 X407 indexable insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast guidance and ordering Technical data Manufacturer article number: 6808155 SKU: 6808155-Tungaloy Manufacturer SKU: TUN6808155 Model series: ISO-Drehwendeschneidplatten Article name: TNGG160402 X407 Tungaloy-Wendeplatte Core data Insert designation: TNGG160402 Size: 16 Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Free clearance angle: 0° Special features Material: carbide Grade: X407 (Tungaloy) Shape: triangular Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal) Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The TNGG160402 X407 insert is specified for general turning and, with its X407 carbide grade, offers a balanced performance for a broad range of steels and common workshop materials. Can the insert be used on both external and internal operations? Yes, the TNGG160402 X407 indexable insert is designed for both external and internal turning when paired with the appropriate holder or boring bar. How does the double-sided chipbreaker affect machining? The double-sided chipbreaker on this insert supports reliable chip control over repeated indexings, enabling consistent chips and safer evacuation in many turning scenarios. What does the 0.2 mm corner radius mean for part finish? A 0.2 mm corner radius provides a compromise between edge strength and fine contouring, helping to achieve smoother surface finishes without excessively increasing cutting forces. How is the insert clamped in the holder? Clamping relies on the insert’s form, the cylindrical hole and adherence to ISO seat geometry; correct matching of holder dimensions and tolerance class ensures stable fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 GH110 Wendeplatten - Tungaloy
Take advantage of wear-resistant carbide and precise chip control for consistent turning performance; the insert’s ISO compatibility and compact geometry ensure simple holder matching and economical indexable use. Order directly via Metav Werkzeuge or consult the team for application support. TNGG 160404 GH110 Turning Insert (triangular, 0.4 mm radius) – Tungaloy A TNGG160404 GH110 ISO‑standard indexable insert designed for external and internal turning, offering robust edge stability and controlled chip formation in a variety of machining situations. ISO‑standard triangular insert Carbide grade GH110 for wear resistance 0.4 mm nose radius for fine profiles Cylindrical hole, double-sided chipbreaker Efficient compatibility for standard turning systems The insert is an ISO 160404 format; compatibility with a toolholder depends on form, clearance angle, tolerance class, fastening type, size and thickness. The carbide substrate paired with grade GH110 provides a balanced combination of wear resistance and edge toughness, which supports repeatable component quality and extended tool life. Using standardised geometry simplifies inventory and reduces setup time across multiple machines. Geometry that improves surface finish and productivity A triangular plate with a 60° included angle and a 0.4 mm corner radius delivers predictable cutting behaviour on detail work and light profiling. The double-sided chipbreaker and cylindrical hole enable two cutting edges per insert, lowering cost per cutting edge and easing replacement. The insert’s 0° clearance suits certain holder designs and requires careful selection of toolholder geometry for optimal rake and engagement, resulting in improved surface finish and machining stability. Practical guidance for selection and application Select the chipbreaker and GH110 grade to match workpiece material, cutting strategy and machine stability; the right combination reduces tool change frequency and scrap. The insert’s carbide base tolerates standard turning feeds and speeds when paired with appropriate coolant and clamping torque. For shorter cycle times and consistent parts, verify holder fit and torque on the clamping screw, and prefer rigid setups to exploit the insert’s edge stability and chip control. Contact Metav Werkzeuge for tailored advice on applying Tungaloy TNGG160404 GH110 inserts and for fast supply – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6808189 Manufacturer SKU: TUN6808189 Metav SKU: 6808189-Tungaloy Designation: TNGG160404 GH110 Tungaloy insert Model series: ISO turning indexable inserts Material: Carbide Dimensions & Angles Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 60° Materials & Features Carbide substrate Grade: GH110 Triangular plate form Double-sided chipbreaker Cylindrical hole ISO format for turning FAQ What mounting considerations are important for this insert? Ensure the holder matches the ISO 160404 geometry, clearance angle and thickness; correct clamping torque and a matching seat reduce vibration and secure the insert for repeatable turning with the TNGG160404 GH110 insert. Can the insert be used for both external and internal turning? Yes, the triangular design and double-sided configuration permit economical use for external and appropriate internal turning when the holder and machine geometry allow. How does the GH110 grade affect tool life? GH110 provides a combination of wear resistance and edge stability; this supports longer tool life under standard turning conditions while maintaining consistent surface quality. Is the insert suitable for fine profiling and detail work? The 0.4 mm nose radius and 60° plate angle favour fine profiling and detail machining where controlled chip formation and small radii are required. How many edges are available per insert and what is the benefit? The double-sided design offers two usable cutting edges per insert, improving cost efficiency and simplifying replacements in production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 GH110 Wendeplatten - Tungaloy
Combining GH110 wear resistance, a 0.4 mm corner radius and ISO compatibility, this insert supports stable, economical turning with consistent chip formation. Order the TNGG160404 directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNGG 160404 GH110 Tungaloy turning insert – ISO triangular insert for turning, 60° The TNGG160404 GH110 is an ISO‑standard triangular insert designed for precision external and internal turning, optimised for reliable edge stability and predictable chip control. ISO‑standard triangular insert GH110 grade for wear resistance 0.4 mm corner radius for fine profiling Double‑sided chipbreaker for economy Cylindrical hole for secure clamping High process reliability through grade and substrate The GH110 designation identifies a Tungaloy carbide grade developed to balance wear resistance and toughness for turning tasks. The cemented carbide substrate provides a stable cutting edge that sustains performance during interrupted cuts and varying feed conditions. Good chip control from the insert geometry reduces rework and tool changes, supporting predictable cycle times on production runs. The overall result is repeatable component quality with fewer tool interventions. ISO compatibility reduces setup complexity Being part of an ISO series, the insert matches a wide range of tooling systems when the holder’s form, clearance angle, tolerance class, fastening and size correspond to the plate. Essential dimensions such as 16 mm inscribed circle, plate thickness 4.76 mm and included 60° angle make selection straightforward for standard triangular holders. The cylindrical hole style ensures secure clamping and correct positional repeatability, simplifying changeovers and reducing set‑up time on the lathe. Fine finishing and efficient economy in turning A 0.4 mm corner radius produces controlled profile definition and helps achieve the required surface finish on narrow radii and small features. The double‑sided design with a dedicated chipbreaker offers two indexed cutting edges per insert, halving the cost per edge compared with single‑edged alternatives. This combination of geometry and grade delivers both precision in finishing passes and cost‑effective performance across medium‑duty turning operations. Practical handling, assembly and grade selection The insert forms part of a system consisting of insert, holder, shim and clamp (plus replacement screws). Compatibility is determined by plate form, 0° clearance angle, tolerance class, fastening method, size and thickness; matching these parameters avoids misfits and ensures secure seating. Select the chipbreaker and GH110 grade according to workpiece material, machining stability and desired tool life. For specific machining data or to verify fitment, technical guidance is available from Metav Werkzeuge. For Tungaloy quality and precise grade selection, contact Metav Werkzeuge for supply and application guidance; our consultants will confirm compatibility and help with ordering. Technical data Article number: 6808164 Manufacturer SKU: TUN6808164 SKU: 6808164-Tungaloy Model series: ISO‑turning indexable inserts Material: cemented carbide Core dimensions Inscribed circle / size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Hole style: cylindrical hole Special features Triangular plate shape Double‑sided chipbreaker GH110 Tungaloy grade ISO‑standard insert Application: turning With hole for secure clamping FAQ What materials is this insert intended for? The TNGG160404 GH110 insert is intended for general turning; the GH110 grade provides a balance of wear resistance and toughness suitable for a range of workpiece materials when the correct chipbreaker is chosen. How is the insert mounted in a toolholder? Mounting requires a compatible ISO triangular holder with matching form, fastening and tolerance; the insert’s cylindrical hole enables secure clamping in the holder assembly. How many cutting edges are available per insert? The double‑sided chipbreaker design gives two indexable edges per insert, permitting economical edge utilisation before replacement is required. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius allows finer profile control and contributes to improved surface finish on small radii and detailed turning features. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com