TNGG 160404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, uncoated cemented carbide grade and a compact triangular geometry to achieve low cutting forces and clean surface finishes in non‑ferrous turning. Order directly via Metav Werkzeuge or request application advice from our consultants. TNGG 160404 TH10 Tungaloy indexable insert — ISO triangular insert for turning with 0.4 mm corner radius TNGG160404 TH10 is an ISO‑standard triangular indexable insert designed for general‑purpose external and internal turning in non‑ferrous materials, offering a sharp uncoated cutting edge and a double‑sided chipbreaker. ISO triangular insert TNGG 160404 for turning Uncoated cemented carbide TH10 for non‑ferrous materials 0.4 mm corner radius for improved surface finish Double‑sided chipbreaker and cylindrical hole for secure clamping High‑efficiency cutting with a sharp uncoated grade The combination of a sharp uncoated cemented carbide grade and a triangular insert form reduces cutting resistance, which supports shorter cycle times and lower power draw in many turning operations. The TH10 grade is formulated as a universal, sharp grade particularly suited to non‑ferrous materials, where an uncoated cutting edge helps to avoid built‑up edge and to produce clean surfaces. The insert’s geometry—with an included angle of 60° and a 0.4 mm corner radius—is tailored for fine finishing and light to medium machining, allowing stable contact conditions and consistent surface quality during finishing passes. Reduced setup complexity and reliable clamping Being an ISO‑standard indexable insert, this design simplifies holder selection and changeover because compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness. The central cylindrical hole and the double‑sided chipbreaker provide secure mechanical clamping and reversible use of the cutting edges, which improves tool economy. The insert thickness of 4.76 mm and the nominal size 16 ensure robust seating in compatible external holders or boring bars, reducing vibrational risk and maintaining repeatable tool positions across batches. Practical application guidance and material suitability The insert is intended for external and internal turning where low cutting forces and a clean finish are priorities. Its uncoated TH10 composition performs well on aluminium, brass and many non‑ferrous alloys as well as certain plastics, particularly when machining parameters are set to favour lower feed rates and moderate speeds. To achieve optimal results, match the chipbreaker style and the TH10 grade to the workpiece material and the stability of the setup; the double‑sided design enables economical index changes without compromising process reliability. For holders and clamping sets, ensure matching of form, free angle and size to exploit the insert’s performance fully. Contact Metav Werkzeuge for application advice on Tungaloy TH10 inserts or to request cutting data tailored to specific turning operations Technical Data Article number: 6808192 Manufacturer SKU: TUN6808192 SKU: 6808192-Tungaloy Manufacturer: Tungaloy Dimensions & Geometry Insert designation: TNGG160404 Shape: triangular Size: 16 Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Features & Materials Material: cemented carbide Grade/coating: TH10 (uncoated) Chipbreaker: double‑sided Hole: with cylindrical hole Application: external and internal turning ISO series: ISO turning indexable insert Compatibility: determined by holder form, clearance angle, tolerance class, fastening, size and thickness FAQ What workpieces are best suited to this insert? This insert is ideal for non‑ferrous workpieces such as aluminium and brass; the TH10 uncoated grade supports low cutting forces and clean surface finishes in such materials. Can the insert be reversed to use both sides? Yes, the double‑sided chipbreaker design allows reversal of the insert to use the second cutting edge, improving economy in batch production. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius helps to produce finer surface finishes at typical finishing feeds, while providing moderate edge strength for light roughing. Is the insert compatible with standard ISO holders? The ISO designation means the insert conforms to standard forms; compatibility depends on matching holder form, clearance angle, tolerance and size to the insert geometry. Which grade should be chosen for higher cutting speeds? For higher speeds on non‑ferrous materials, TH10 performs well in many cases; consult cutting data for specific speed and feed recommendations for the workpiece and machine rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNGG 160404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of sharp TH10 grade, uncoated carbide performance and ISO compatibility for reliable turning results; suitable for external and internal turning, the insert ensures low cutting forces and clean surface finishes — order directly via Metav Werkzeuge or consult the product specialists if application advice is needed. TNGG 160404 TH10 triangular ISO turning insert by Tungaloy — 0.4 mm nose radius, 60° cutting edge The TNGG160404 TH10 is a triangular, ISO‑standard indexable insert designed for turning applications; optimised for low‑force cutting and clean surfaces when machining non‑ferrous materials and similar workpieces ISO‑standard triangular insert Uncoated carbide TH10 grade 0.4 mm nose radius for fine finishes Cylindrical hole, 4.76 mm thick, double‑sided Consistent cutting geometry for predictable production The triangular indexable insert delivers a stable cutting edge geometry that supports repeatable machining results in both external and internal turning. The combination of a 60° cutting angle and 0° rake produces a favourable force distribution at the tool tip, reducing chatter and enabling steady tool life. For production environments where process reliability matters, this geometry reduces downtime by lowering the frequency of regrinds and adjustments while maintaining dimensional consistency. TH10 uncoated carbide: efficient cutting with clean surfaces The uncoated TH10 grade offers a sharp, universal cutting edge that is particularly effective on non‑ferrous materials and operations requiring minimal cutting forces. Because the grade is uncoated, the edge forms are extremely keen, which helps to produce clean surface finishes and reduces the risk of built‑up edge in sticky materials. The customer benefit is clear: fewer secondary operations to rectify surface defects and improved part quality for subsequent assembly or finishing stages. Practical design for secure mounting and economical indexing The insert’s cylindrical hole and standard ISO form ensure compatibility with a wide range of external holders and toolposts; compatibility is governed by form, clearance angle, tolerance class, fixing method, size and thickness. With a 4.76 mm plate thickness and double‑sided chipbreaker, the insert offers two usable edges per index, improving cost‑efficiency in batch production. The 0.4 mm nose radius balances edge strength with the ability to achieve fine surface detail, making this insert suitable where a narrow corner radius is required without compromising stability. Choosing the right application and extending tool life For best results, match the TH10 grade and chipbreaker style to the workpiece material and the desired surface finish. The sharp nature of the uncoated carbide favours moderate feed rates and controlled cutting speeds to avoid premature edge wear; when machining aluminium, non‑ferrous alloys or soft steels, the insert’s geometry helps to maintain low cutting forces and minimise thermal loading. Selecting a holder and clamping set that conforms to ISO tolerances will ensure correct seat and screw engagement, which in turn supports consistent performance and maximises indexable lives. For application-specific advice or to secure stock of the TNGG160404 TH10 insert, contact Metav Werkzeuge — the team provides ordering and technical guidance to ensure the insert meets the intended turning task Technical data Article number: 6808163 Manufacturer SKU: TUN6808163 ISO designation: 160404 Product name: TNGG160404 TH10 Numbers / Core technical data Nose radius: 0.4 mm Plate thickness: 4.76 mm Inscribed circle / size: 16 mm Cutting angle: 60° Rake angle: 0° Designs / Special features Triangular plate, indexable insert Uncoated carbide material TH10 sharp universal grade Double‑sided chipbreaker Cylindrical central hole FAQ What materials is this insert best suited for? The TNGG160404 TH10 insert is optimised for non‑ferrous materials and applications where a sharp, uncoated carbide edge reduces cutting forces and delivers clean surfaces. How many cutting edges are available per insert? With a double‑sided chipbreaker and triangular geometry, the TNGG160404 provides multiple usable edges per index, improving overall cost efficiency. Is the insert compatible with ISO‑standard holders? Yes — the insert follows ISO‑standard dimensions (160404) and compatibility depends on holder form, clearance angle, tolerance and fixing method. What benefits does the 0.4 mm nose radius provide? A 0.4 mm nose radius offers a balance between edge strength and surface finish capability, enabling finer detail while maintaining stability during turning operations. Does TH10 require a coating for better wear resistance? TH10 is an uncoated, sharp universal grade designed to produce low cutting forces and clean finishes; coatings are typically chosen when increased abrasive wear resistance is required. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNGG 160404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a precise 0.4 mm nose radius and the sharp TH10 uncoated carbide for predictable chip formation and improved surface quality; order the insert directly via Metav Werkzeuge or consult our advisors for application support. TNGG 160404 TH10 Tungaloy turning insert — ISO 160404 triangular, 0.4 mm radius A TNGG160404 TH10 indexable insert for turning, designed for ISO-compliant external and internal machining and optimised for non-ferrous materials. ISO triangular insert TNGG160404 TH10 Uncoated carbide for low cutting forces 0.4 mm nose radius for fine profiles Double-sided chipbreaker with cylindrical hole Reliable finishing for non-ferrous turning Designed for predictable performance in light-alloy and non-ferrous turning, the insert combines a sharp universal grade with a fine geometry to support accurate finishes. The TH10 grade is an uncoated carbide formulated for applications in which a bare cutting edge reduces cutting forces and minimises built-up edge, leading to cleaner surfaces. The small 0.4 mm nose radius enables precise profiling and dimensional repeatability, which is particularly beneficial for fine-detail work and parts where surface integrity is critical. Quick integration and efficient indexing to save set-up time Manufactured to ISO dimensions, the insert is straightforward to integrate into standard toolholder systems; compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness. The geometry — 16 mm inscribed circle, 4.76 mm thickness, 60° included angle and 0° clearance — together with the cylindrical hole ensure secure clamping and quick exchange. The double-sided design allows two usable cutting edges per position, reducing tooling cost per edge and simplifying inventory management. Tailored chip control and consistent part quality Chip management is achieved through the double-sided chipbreaker, which provides versatility across varying material grades and cutting conditions. The uncoated edge of the TH10 grade favours low cutting resistance and supports a smooth finish on softer materials; where higher stability is available, the geometry promotes efficient material removal and repeatable dimensional results. Select the chipbreaker and grade to match workpiece material, cutting forces and machine rigidity for best outcomes. For consistent finishing in non‑ferrous turning, source the TNGG160404 TH10 from Metav Werkzeuge or request tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Manufacturer article number: 6808176 SKU: 6808176-Tungaloy Manufacturer SKU: TUN6808176 Model series: ISO turning indexable inserts Material: Carbide Dimensions & Geometry Inscribed circle (IC): 16 mm Nose radius: 0.4 mm Thickness: 4.76 mm Included angle: 60° Clearance angle: 0° Hole style: cylindrical Features & Applications Grade: TH10 Uncoated carbide Double-sided chipbreaker For external and internal turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The TNGG160404 TH10 Tungaloy indexable insert is optimised for non‑ferrous materials and light alloys; the uncoated TH10 grade supports low cutting forces and clean surface generation. How does the ISO designation affect holder compatibility? ISO conformity means the insert matches holders and boring bars that accept ISO triangular inserts; compatibility is checked by form, clearance angle, tolerance class, fastening, size and thickness. Can the insert be indexed to use multiple cutting edges? Yes — the triangular shape with a double‑sided chipbreaker and the central cylindrical hole allow reliable clamping and rotation to a fresh edge, extending usable life. What finish can be expected with a 0.4 mm nose radius? A 0.4 mm nose radius is suited to fine profiling and finishing operations, offering a balance between edge strength and surface quality for delicate contours. Is the TH10 grade coated or uncoated, and what does that mean for use? The TH10 grade is uncoated carbide, which favours operations where lower cutting forces and reduced adhesion are needed for clean finishes, especially on softer and non‑ferrous materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 TH10 Wendeplatten - Tungaloy
Taking advantage of ISO‑standard compatibility, the sharp TH10 uncoated carbide grade and a compact 0.4 mm corner radius ensures efficient turning of non‑ferrous components with clean surface finishes; Order the TNGG160404 TH10 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNGG160404 TH10 Tungaloy turning insert — triangular 16 mm, 60° A TNGG160404 TH10 Tungaloy ISO triangular turning insert designed for external and internal turning, optimised for non‑ferrous materials and low‑force machining. ISO‑standard triangular insert Sharp universal uncoated grade TH10 Double‑sided chipbreaker for flexibility 60° geometry, 0.4 mm corner radius Consistent fit and system integration for indexed turning The insert is manufactured to ISO‑compliant dimensions so that compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. This ensures predictable assembly in an indexable tooling system and reliable repeatability during index changes. The cylindrical hole and standardised geometry simplify retrofitting into existing toolholders and minimise setup time, supporting steady production throughput. Clean cutting and surface quality on non‑ferrous alloys The uncoated cemented carbide composition and the TH10 grade deliver a sharp cutting edge that reduces cutting forces and promotes smooth chip flow when machining aluminium, copper alloys and other non‑ferrous materials. The double‑sided chipbreaker aids controlled chip formation and prevents entanglement, which lowers the risk of built‑up edge and contributes directly to improved surface finish and reduced rework. For applications prioritising low cutting forces and fine finishes, this insert is a practical choice. Operational benefits: handling, indexing and tool life A 16 mm inscribed circle and 4.76 mm thickness provide mechanical stability during interrupted cuts, while the 0.4 mm corner radius balances edge strength and micro‑finish capability. The triangular shape with a 60° included angle offers three usable corners per index, increasing economy per insert. The combination of a sharp, uncoated grade with a standardised format makes spare part management straightforward and supports predictable replacement intervals in serial production. Recommended applications and setup guidance Designed primarily for turning, the insert excels in both external and internal operations where low cutting forces and clean surfaces are required. Select an appropriate holder and match the chipbreaker and grade to material, cutting mode and machine stability. When machining softer non‑ferrous alloys, moderate feed rates and appropriate coolant strategy will further extend performance and sustainable productivity. For reliable performance with the TH10 grade, contact Metav Werkzeuge for application advice and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange an order or technical consultation. Technical data Article number: 6808168 Manufacturer SKU: TUN6808168 WPL designation: 160404 Product label: TNGG160404 TH10 Tungaloy‑Wendeplatte Facts Included angle: 60° Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Hole: with cylindrical hole Special features Uncoated cemented carbide, grade TH10 Double‑sided chipbreaker ISO‑standard triangular insert Suitable for external and internal turning Compatibility determined by form, clearance angle, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The TNGG160404 TH10 insert is optimised for non‑ferrous materials such as aluminium and copper alloys; the TH10 grade and sharp uncoated carbide promote low cutting forces and clean surfaces. How many usable corners are available on the insert? The triangular format with a 60° included angle provides three cutting corners per insert, enabling economical use and straightforward index changes. What does the chipbreaker design offer? The double‑sided chipbreaker supports controlled chip formation and reduces the likelihood of built‑up edge, improving surface finish and process reliability when using this Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNGG 160404 TH10 Wendeplatten - Tungaloy
Take advantage of the cost-effective, high-precision combination of an uncoated carbide grade and a double-sided chipbreaker for consistent, low-force turning of non-ferrous materials; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNGG160404 TH10 turning insert, uncoated carbide, 0.4 mm corner radius — Tungaloy The TNGG160404 TH10 is an ISO-series triangular turning insert designed for external and internal turning operations, optimised for low cutting forces and clean surface finishes on non-ferrous materials. ISO triangular insert, 60° geometry Uncoated carbide for low cutting forces Double-sided chipbreaker for clean finishes Consistent surface quality with controlled chip formation The combination of an uncoated carbide grade and a double-sided chipbreaker provides reliable chip control and helps to achieve a superior surface finish on aluminium, brass and similar materials. The insert’s geometry and the chipbreaker design reduce built-up edge tendency and promote short, manageable chips, which supports stable machining and reduces the need for secondary finishing. For operations where low cutting forces and cleanliness of the machined surface are priorities, this insert delivers measurable process advantages. Straightforward selection and tool compatibility for ISO systems Compatibility with toolholders is determined by shape, clearance, tolerance class, fastening, size and thickness; the insert’s ISO turning inserts format simplifies sourcing and changeover. The triangular form with a 60° geometry and a 0.4 mm corner radius offers predictable engagement with the workpiece and defined stress distribution at the cutting edge. The 0° clearance angle and a 4.76 mm thickness ensure secure clamping and repeatable positioning in standard holders. These characteristics allow engineers to select the correct holder and clamping set with confidence, reducing downtime associated with trial-and-error fitting. Economic performance and practical system use in turning Designed as a sharp universal grade, the TH10 composition supports clean cuts at moderate feeds and speeds, particularly when machining non-ferrous alloys where minimal cutting force is advantageous. The double-sided chipbreaker contributes to longer productive time between indexings, while the robust carbide body withstands typical turning loads. Together with a compatible external holder or boring bar, the insert forms a compact system that is easy to maintain and replenishable with standard spare screws and clamping components, supporting efficient shop-floor logistics and predictable process planning. Contact Metav Werkzeuge for tailored advice on using the Tungaloy TH10 insert in specific turning applications or to arrange an inspection of toolholder compatibility via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6808194 Manufacturer SKU: TUN6808194 Manufacturer: Tungaloy Data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 60° Clearance angle: 0° Special features Triangular form Cylindrical hole Double-sided chipbreaker Uncoated carbide material ISO-series turning insert Application: turning FAQ What materials is this insert best suited for? The TNGG160404 TH10 insert is intended primarily for non-ferrous materials such as aluminium and brass, where its uncoated carbide and chipbreaker support low cutting forces and clean surfaces. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius balances edge strength and surface finish: it reduces edge chipping while still enabling fine surface quality in standard turning operations. Is this insert compatible with standard ISO toolholders? Yes, the insert follows ISO-series dimensions; compatibility depends on matching holder form, fastening method, tolerance and thickness. What does double-sided chipbreaker mean for tool life? The double-sided chipbreaker aids consistent chip control and can contribute to longer productive intervals between indexings, improving economical usage of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 TH10 Wendeplatten - Tungaloy
Combine low cutting forces, clean surface finish and ISO compatibility for dependable turning performance; ideal for series production and precision finishing. Order the TNGG160404 TH10 insert directly via Metav Werkzeuge or ask our consultants if technical advice is required. TNGG160404 TH10 Tungaloy turning insert — triangular ISO insert for turning applications, 60° geometry The TNGG160404 TH10 is an ISO-standard triangular indexable insert designed for external and internal turning; it offers a sharp, uncoated cemented carbide edge purpose-built for low cutting-force machining of non-ferrous materials and mixed applications. *ISO-standard triangular geometry *Sharp uncoated cemented carbide grade TH10 *0.4 mm corner radius for fine finishing *Cylindrical through-hole for secure clamping Improved process efficiency through low cutting forces The combination of the TH10 grade and an uncoated cemented carbide cutting edge reduces cutting forces and minimises built-up edge when machining aluminium and other softer alloys. Lower cutting forces translate directly into reduced spindle load and longer tool life in many applications, which helps maintain stable cycle times and consistent surface quality. The result is a predictable machining process suited to both small-batch and higher-volume production where reproducible finishes are required. Consistent fit and secure clamping for repeatable accuracy Manufactured to the ISO-standard designation 160404, the insert’s 60° triangular form and 0.4 mm corner radius ensure predictable engagement with matching toolholders. The through-hole (cylindrical) mounting and standardised thickness allow straightforward replacement and accurate seating in common external holders and boring bars. Compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness; selecting a matching holder and clamp set therefore delivers repeatable alignment and concentricity for precision turning. Indexable design and process reliability for productive machining As a double-edged component with a double-sided chipbreaker, the insert is indexable to present fresh cutting edges with minimal downtime. The geometry supports stable chip formation and controlled evacuation, improving surface finish and reducing secondary operations. That indexability, combined with the economical nature of an uncoated edge for the target materials, offers a strong cost-to-performance ratio for workshops aiming to balance tool consumption and productivity while keeping setups simple and maintenance time low. For application-specific recommendations and to secure original Tungaloy indexable inserts, contact Metav Werkzeuge for matching holders and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6808178 Manufacturer SKU: TUN6808178 SKU: 6808178-Tungaloy Model series: ISO turning indexable inserts Designation: TNGG160404 TH10 Numbers / Core technical data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 60° Clearance angle (relief): 0° Design & features Triangular insert form Cylindrical through-hole Double-sided chipbreaker Uncoated cemented carbide grade TH10 ISO designation TNGG160404 Application: turning (external and internal) FAQ What materials is this insert best suited for? The TNGG160404 TH10 insert is intended primarily for non-ferrous materials and mixed applications; the uncoated cemented carbide edge supports low cutting forces and clean surfaces when turning aluminium and similar alloys. How is the insert mounted in a toolholder? The insert uses a cylindrical through-hole for clamping; fitment depends on holder form, clearance angle, tolerance class, fastening method, size and thickness to ensure proper seating and repeatable alignment. Is the chipbreaker suitable for finishing operations? Yes — the double-sided chipbreaker on the TNGG160404 TH10 promotes controlled chip formation and helps achieve fine surface finishes in suitable materials while allowing indexability for renewed cutting edges. Can the insert be used for internal turning as well as external turning? The ISO geometry and standardised dimensions make the insert suitable for both external and internal turning, provided a compatible boring bar or holder is used with the correct mounting and clearance. How many edges are available before the insert must be replaced? The indexable design with a double-sided chipbreaker supplies multiple usable cutting edges; the exact number depends on applied cutting data, workpiece material and operating conditions, but indexability reduces overall tooling downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 X407 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard compatibility, robust cemented carbide X407 grade and a double-sided chipbreaker for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and cutting condition advice. TNGG 160404 X407 — Tungaloy turning insert, ISO triangular, 60° TNGG160404 X407 is a Tungaloy indexable insert for turning, engineered as an ISO-standard triangular cutting solution with a 60° geometry for external and internal turning operations ISO-standard triangular insert Cemented carbide grade X407 Double-sided chipbreaker for versatility 60° cutting angle with cylindrical hole Consistent cutting performance for demanding turning operations The triangular indexable insert delivers reproducible results thanks to its cemented carbide substrate and the X407 grade tuning of toughness and wear resistance. The geometry with a 60° included angle and a corner radius 0.4 mm provides a balance between edge strength and surface finish, enabling steady metal removal in interrupted or continuous cuts. Where process stability is essential, the combination of chipbreaker design and grade selection reduces flank wear and contributes to predictable tool life, supporting higher machine utilisation and fewer tool changes. Designed for straightforward integration with ISO toolholders As an ISO-standard component, the insert suits holders that match its triangular form, thickness and mounting style. The cylindrical hole and tolerance class determine clamping behaviour; therefore matching the insert to the correct external holder or screw-clamped boring bar is crucial for secure seating and accurate cutting geometry. The plate thickness 4.76 mm and the triangular insert form mean established clamping systems can be used without special adapters, reducing setup time and simplifying tool inventory management for production shops. Practical application advice and measurable benefits Selecting the right chipbreaker and X407 grade adapts the insert to the workpiece material and machining strategy; this yields improved chip control, reduced built-up edge and enhanced component surface quality. For economical machining, the stable edge provided by the grade improves repeatability and can lower overall tooling cost per component through longer indices per insert. If additional technical data or assistance with holder compatibility is required, technical advisors are available — eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 — to support process matching and cutting-parameter recommendations. For application support and to source genuine Tungaloy X407 inserts, contact Metav Werkzeuge — our specialists will advise on holder compatibility and optimal cutting conditions Technical data Article number: 6808172 Manufacturer SKU: TUN6808172 SKU: 6808172-Tungaloy Model series: ISO turning indexable inserts Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Clearance angle: 0° Plate form: triangular Hole style: cylindrical hole Special features Grade: X407 Material: cemented carbide Chipbreaker: double-sided Application: turning ISO designation: TNGG160404 FAQ What types of turning are suitable for this insert? The TNGG160404 X407 Tungaloy insert is intended for external and internal turning; its triangular geometry and double-sided chipbreaker make it suitable for a range of feed and depth-of-cut combinations. How does the X407 grade affect tool life and toughness? The X407 grade balances wear resistance and edge toughness, giving the insert reliable cutting-edge stability and extended service life under moderate to demanding turning conditions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, free angle, tolerance class, mounting and size; use holders designed for ISO triangular inserts with a cylindrical-hole clamping arrangement to ensure correct seating. Can the insert be used for interrupted cuts? Yes; the combination of cemented carbide substrate and the specified corner radius provides enhanced edge strength suited to interrupted cutting, but final selection of chipbreaker and cutting data should match the workpiece material. What are the key dimensional specifications to check when replacing an insert? Verify the size (16 mm), thickness (4.76 mm), corner radius 0.4 mm, hole style and the ISO designation TNGG160404 to ensure correct fit and clamping stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 X407 Wendeplatten - Tungaloy
Take advantage of the combination of precise geometry, robust X407 carbide grade and a reversible double-sided design for consistent machining results; order directly via Metav Werkzeuge or consult the specialists for application support. TNGG160404 X407 ISO triangular turning insert by Tungaloy — 60° included angle, 0.4 mm corner radius The TNGG160404 X407 is a triangular ISO turning insert designed for general external and internal turning applications, engineered to combine cutting-edge stability with reversible use and standard ISO compatibility. ISO triangle insert TNGG160404 for turning Tungaloy carbide grade X407 for wear resistance 60° included angle with 0.4 mm corner radius Double-sided chipbreaker, cylindrical hole, 4.76 mm Consistent cutting performance for reliable turning The indexable insert delivers a balance of wear resistance and edge stability through the Tungaloy X407 carbide formulation, which is tailored for turning operations. The 60° included angle and defined 0.4 mm corner radius provide predictable engagement and surface finish while the reversible geometry with a double-sided chipbreaker reduces tooling costs by enabling multiple reuses of the cutting edge. This results in higher process stability and fewer interruptions on the shopfloor, supporting efficient cycle times and longer effective tool life. Simple integration with ISO toolholders to minimise set-up time Manufactured to ISO indexable insert standards, the plate’s compatibility depends on shape, clearance angle, tolerance class, fastening method, size and thickness. The triangular form with a cylindrical hole and a plate thickness of 4.76 mm allows secure clamping in compatible external holders or boring bars. Clear dimensional conformity helps to reduce trial-and-error during tool changes and ensures a repeatable clamping position, which supports dimensional consistency in serial production runs and lowers setup time. Practical advantages for varied turning tasks Designed for turning, the insert’s geometry and double-sided chipbreaker concept allow selection of an appropriate chip control and cutting mode depending on workpiece stability and machining strategy. The reversible nature of the plate improves cost-efficiency per cutting edge and the defined clearance/relief geometry promotes consistent chip formation. For materials and cutting conditions where increased edge robustness is required, the carbide grade and geometry prioritise stable cutting and predictable wear behaviour, contributing to overall process reliability and productivity. For high-reliability turning with Tungaloy's X407 grade, contact Metav Werkzeuge for availability and technical advice — Metav Werkzeuge is reachable by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Manufacturer article number: 6808188 SKU: 6808188-Tungaloy Manufacturer SKU: TUN6808188 Model series: ISO indexable turning inserts Material: carbide Facts Included angle: 60° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 16 mm Special features Triangular plate form With cylindrical hole Double-sided chipbreaker Grade: X407 (Tungaloy) Clearance angle: 0° FAQ What machining tasks suit this insert best? The TNGG160404 X407 insert is intended for external and internal turning; the grade and chipbreaker are chosen to match workpiece material, stability and machining method. How does the insert mount to a holder? Compatibility is determined by plate form, clearance angle, tolerance class, fastening type, size and thickness; the triangular plate with a cylindrical hole fits ISO-compatible clamping systems. Is the chipbreaker reversible and what benefit does that bring? The double-sided chipbreaker on the insert allows reversible use of cutting edges, increasing the number of usable edges per plate and improving cost-efficiency. What are the key geometry values to note for setup? The insert has a 60° included angle and a 0.4 mm corner radius, with a plate thickness of 4.76 mm and a plate size of 16 mm. Which grade and manufacturer are specified for this insert? This item is supplied in Tungaloy’s X407 carbide grade; the product is an ISO triangular turning insert manufactured by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 GH110 Wendeplatten - Tungaloy
TNGG160408 GH110 Wendeplatte zum Drehen – Tungaloy Die TNGG160408 GH110 Wendeplatte ist eine Hartmetallplatte für Multidirektionales Drehen und bietet stabile Schneidkanten sowie ausgeglichene Verschleißfestigkeit für produktive Zerspanung. TNGG160408 GH110 für Multidirektionales Drehen Hartmetall-Ausführung für hohe Standzeit Doppelseitiger Spanbrecher für stabile Spanbildung Dreieckige Plattenform mit 0,8 mm Eckenradius Zylindrisches Loch zur sicheren Befestigung Produktives Drehen mit stabiler Schneidkante Die Kombination aus Hartmetall und der Schneidstoffsorte GH110 sorgt für ein ausgewogenes Verhältnis von Verschleißfestigkeit und Zähigkeit. Dadurch ergeben sich gleichbleibende Schnittleistungen bei Längs-, Plan- und Profildrehen, was die Produktivität in Serien- und Einzelfertigung erhöht. Die Beschaffenheit der Kante reduziert Störschnitt und führt zu weniger Stillstand durch Nacharbeit oder Werkzeugwechsel. Präzise Spanführung und vielseitige Anwendung Die Plattendicke von 4,76 mm und der definierte Freiwinkel von 0° tragen zu konstanter Spanbildung und guter Oberflächenqualität bei. Im Multidirektionalen System AddMultiTurn ermöglicht die Geometrie zuverlässige Ergebnisse bei wechselnder Vorschubrichtung. Diese Eigenschaften unterstützen eine effiziente Prozessführung und reduzieren Ausschuss sowie Rüstzeiten. Sichere Aufnahme und wiederholgenaue Positionierung Die dreieckige Plattenform mit zylindrischem Loch und der Eckenradius von 0,8 mm gewährleisten stabile Klemmbedingungen und einfache Indexierung. Der doppelseitige Spanbrecher verbessert die Spanabfuhr und beugt Stauerscheinungen vor. Insgesamt sorgt die Konstruktion für wiederholgenaue Bearbeitung und verlängerte Standzeiten der Wendeschneidplatte. Einsatzgebiet und Anwendernutzen Entwickelt für das Drehen in produktionsnahen Fertigungsumgebungen, eignet sich die Platte besonders für Anwender, die auf konstante Performance und Prozesssicherheit Wert legen. Die AddMultiTurn Modellserie unterstützt mehrere Bearbeitungsrichtungen mit einem Werkzeug, was Rüstaufwand reduziert und die Flexibilität in der Fertigungsplanung erhöht. Bei Fragen zu Schnittdaten oder zur passenden Halterausführung hilft der Kundenservice gern weiter. Empfehlung: Die TNGG160408 GH110 Wendeplatte von Tungaloy für produktive und prozesssichere Drehaufgaben direkt über Metav Werkzeuge anfragen, technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6808211 Marke: Tungaloy Bezeichnung: TNGG160408 GH110 Modellserie: AddMultiTurn Hersteller SKU: TUN6808211 SKU: 6808211-Tungaloy Fakten Eckenradius: 0,8 mm Winkel: 60° Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten Material: Hartmetall Sorte/Beschichtung: GH110 Plattenform: Dreieckig Spanbrecher: doppelseitig Loch: mit Loch (zylindrisches Loch) Freiwinkel: 0° Anwendung: Drehen Systemaufbau: Halter, Wechselplatten und Klemmsystem Einsatz der Modellserie: Multidirektionales Drehsystem für mehrere Bearbeitungsrichtungen mit einem Werkzeug FAQ Welche Hauptvorteile bietet die TNGG160408 GH110 Wendeplatte von Tungaloy? Die TNGG160408 GH110 Wendeplatte kombiniert Hartmetall mit einer ausgewogenen Sorte für hohe Standzeit und stabile Schneidkanten, was zu geringeren Ausfallzeiten und konstanter Bauteilqualität führt. Ist die Wendeplatte für Profildrehen geeignet? Ja, die Geometrie und der doppelseitige Spanbrecher der TNGG160408 GH110 sind für Längs-, Plan- und Profildrehen ausgelegt und unterstützen stabile Spanbildung auch bei wechselnden Vorschubrichtungen. Welche Plattendicke und Eckenradius hat die Wendeplatte? Die Platte verfügt über eine Plattendicke von 4,76 mm und einen Eckenradius von 0,8 mm, was eine robuste Kante und gute Belastbarkeit sicherstellt. Wie wird die Platte befestigt und indiziert? Die TNGG160408 GH110 nutzt ein zylindrisches Loch zur Befestigung und die dreieckige Form ermöglicht einfache Indexierung und wiederholgenaue Positionierung im Haltersystem. An wen kann man sich bei technischen Fragen zur TNGG160408 GH110 Wendeplatte wenden? Für Schnittdaten, Halterempfehlungen oder Anwendungshinweise steht Metav Werkzeuge zur Verfügung; per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNGG 160408 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of the GH110 wear-resistant grade, the triangular 60° geometry and the AddMultiTurn system to reduce tool changes and maintain stable cutting performance; order the insert via Metav Werkzeuge or consult our application specialists for integration advice. TNGG 160408 GH110 triangular indexable turning insert, 60° cutting angle — Tungaloy The TNGG160408 GH110 is a triangular indexable insert designed for multidirectional turning in longitudinal, facing and profiling operations within the AddMultiTurn system. Triangular insert, 60° cutting angle Grade GH110, wear-resistant carbide 0.8 mm corner radius for profiling Double-sided chipbreaker with cylindrical hole Optimised throughput for multidirectional turning The insert is engineered to deliver measurable productivity gains in workshops that require rapid direction changes. The combination of the GH110 carbide grade and the AddMultiTurn system reduces the frequency of tool changes and supports continuous machining across different cutting directions. This results in fewer interruptions on the machine and a more predictable production rhythm. The robust composition of the cutting grade provides balanced wear resistance and edge stability, which helps maintain cutting performance over longer cycles and lowers the overall tool consumption. Precise profiling and consistent edge life The triangular geometry with a 60° cutting angle and a 0.8 mm radius is particularly suited to profiling and facing tasks where a defined edge form is required. The insert’s double-sided chipbreaker and central cylindrical hole ensure reliable clamping and repeatable indexation, enabling quick repositioning of a fresh cutting edge without complex set-up. These design attributes translate into reproducible surface finishes and consistent component tolerances, which are essential for batch production and parts with tight specifications. Designed for practical workshop integration Made from carbide and supplied as part of the AddMultiTurn model series, this insert is compatible with holders and clamping systems intended for multidirectional turning. The construction allows straightforward replacement and reduces the time spent on secondary adjustments. For users evaluating cutting strategies, the combination of geometry, grade and system compatibility simplifies the selection process and supports a predictable machining outcome. Technical advisors are available to discuss holder selection and process parameters to ensure the insert performs as intended in specific turning applications. Contact Metav Werkzeuge for tailored recommendations on integrating Tungaloy GH110 inserts into existing turning cells and to check current availability and delivery options Technical data Article number: 6808221 SKU: 6808221-Tungaloy Manufacturer item number: TUN6808221 Model series: AddMultiTurn Type designation: TNGG160408 Manufacturer: Tungaloy Core dimensions Angle: 60° Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° ISO code: 160408 Hole: cylindrical Features & grade Carbide material Grade GH110 (Tungaloy) Double-sided chipbreaker Triangular shape Multidirectional turning system compatibility With hole (cylindrical) FAQ What turning operations is this insert best suited for? This insert is designed for longitudinal turning, facing and profiling within multidirectional turning setups; the TNGG160408 GH110 offers a balance of edge stability and wear resistance for these applications. How is the insert secured in the holder? The insert features a central cylindrical hole for positive clamping; the double-sided chipbreaker and triangular form ensure repeatable seating and indexing in compatible holders. What does the GH110 grade deliver in practice? The GH110 grade from Tungaloy is formulated to combine wear resistance and toughness, supporting stable cutting edges and longer tool life under typical turning conditions. Can a fresh cutting edge be indexed on both sides? Yes, the insert is double-sided, allowing the user to index multiple edges and extend the effective tool life before replacement. Is the geometry suitable for fine profiling work? The combination of a 60° cutting angle and a 0.8 mm corner radius is suitable for defined profiles and finishing passes where controlled edge form and surface quality are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of a GH110 cutting grade and a robust triangular geometry for reliable, long-running turning operations; the AddMultiTurn compatibility and cylindrical mounting hole ensure stable clamping and fast insert changes. Order this insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. TNGG160408 GH110 triangle turning insert, 60° cutting angle — Tungaloy A TNGG160408 GH110 insert designed for multidirectional industrial turning, suited to longitudinal, facing and profile turning applications Multidirectional turning system compatible GH110 grade: wear-resistant and tough Triangular insert, 60° cutting angle Double-sided chipbreaker, cylindrical hole Reliable performance for multidirectional turning The AddMultiTurn model series was developed to simplify machining across several directions with a single toolholder; this insert combines that system approach with a carbide substrate optimised in the GH110 grade to balance wear resistance and toughness. The triangular shape with a 60° cutting angle enables versatile use for longitudinal, facing and profile turning while the cylindrical hole provides secure, repeatable clamping in standard indexable-holding systems. As a consequence, set-up times are reduced and process stability is improved through consistent seating and repeatability. Improved chip control and edge stability for higher throughput Equipped with a double-sided chipbreaker, the geometry promotes controlled chip formation across a range of cutting parameters, reducing the risk of built-up edge and limiting tool-related interruptions. The cutting grade emphasises a stable cutting edge and predictable wear behaviour, which supports higher average metal removal rates without sacrificing surface finish. In production terms, this translates into fewer unscheduled tool changes and steadier cycle times, increasing overall workshop productivity while maintaining component quality. Practical dimensions and handling that fit production workflows The insert is a 16 mm triangular form with a 4.76 mm thickness and a 0.8 mm corner radius, providing a compromise between strength and edge definition for medium to heavy turning passes. The cylindrical hole and compatible clamp design of the AddMultiTurn system make the insert easy to index and position; combined with the double-sided chipbreaker layout, multiple cutting edges are available before disposal, improving economy per edge. The substrate material, listed as carbide, ensures mechanical stability under interrupted cuts and varied workpiece materials typical in turning operations. For application-specific advice on using Tungaloy GH110 inserts in AddMultiTurn systems, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808206 Manufacturer SKU: TUN6808206 SKU: 6808206-Tungaloy Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 60° ISO designation: 160408 Relief angle: 0° Hole: with cylindrical hole Special features Material: carbide Grade/coating: GH110 (Tungaloy) Model series: AddMultiTurn Insert form: triangular Chipbreaker: double-sided Intended application: turning Mounting style: indexable insert with cylindrical hole FAQ What machining tasks is this insert best suited for? The TNGG160408 GH110 insert is optimised for turning operations such as longitudinal turning, facing and profile turning within a multidirectional AddMultiTurn system. Which materials can be machined with this grade? The GH110 grade on a carbide substrate provides a balance of wear resistance and toughness suited to a broad range of steels and general turning tasks. How does the cylindrical hole affect clamping? The cylindrical hole ensures secure, repeatable seating in compatible toolholders, improving positional stability and reducing set-up variation for the TNGG160408 GH110 insert. How many usable edges are available before replacement? The triangular form with double-sided chipbreaker allows multiple indexing positions; exact usable edges depend on application and wear but this geometry increases edge economy compared with single-sided designs. Is this insert compatible with standard indexable holders? Yes; the insert’s dimensions, cylindrical hole and profile are intended for use in indexable-holding systems designed for triangular inserts in AddMultiTurn setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of the GH110 carbide grade, multidirectional compatibility and a stable triangular geometry for reliable turning performance — order the insert via Metav Werkzeuge or consult our specialists for application advice. TNGG 160408 GH110 Tungaloy indexable insert — triangular carbide insert for multidirectional turning, 60° A TNGG160408 GH110 triangular indexable insert engineered for multidirectional turning in the AddMultiTurn system, suitable for longitudinal, facing and profile turning. Triangular 60° geometry for versatile turning GH110 grade for wear resistance and edge stability Double-sided chipbreaker with robust 0.8 mm nose Cylindrical hole for secure clamping Consistent wear resistance and dependable cutting performance The combination of GH110 cutting grade and carbide substrate delivers a reliable balance of wear resistance and toughness, extending in-process tool life and reducing unscheduled index changes. Designed for use in the AddMultiTurn multidirectional turning system, this insert supports several machining directions with a single tooling set-up. The result is fewer tool changes and a more continuous production flow; the hardened grade complements the insert geometry to maintain cutting-edge stability under typical turning loads. Precise geometry for predictable surface quality and tool behaviour A triangular plate form with a 60° cutting angle and a 0.8 mm corner radius provides stable contact and controllable engagement depth, which helps to achieve consistent surface finishes in longitudinal and profile operations. The double-sided chipbreaker promotes uniform chip formation on both cutting edges, improving process security and easing chip evacuation. With a 0° clearance and defined cutting edge form, the insert offers predictable cutting forces that support repeatable results and reduced setup variability. System design and handling that speed up shop-floor operations Built to work within a system comprising holder, indexable inserts and clamping mechanism, the insert features a cylindrical hole for positive location and secure clamping. The plate dimensions — 16 mm size with a 4.76 mm thickness — make handling and indexing straightforward while retaining rigidity during cutting. These attributes support shorter changeover times and steady machining cycles in small- to medium-batch production, helping to maintain throughput without sacrificing component quality. For process-critical turning applications, choose the Tungaloy GH110 insert from Metav Werkzeuge — contact our technical advisors at Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) to verify suitability for specific components and cutting parameters Technical Data Article number: 6808198 Manufacturer SKU: TUN6808198 SKU: 6808198-Tungaloy Model series: AddMultiTurn Label: TNGG160408 GH110 Tungaloy-Wendeplatte Material: carbide Facts Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 60° Clearance angle: 0° Hole: with hole (cylindrical hole) Special features Grade: GH110 (Tungaloy cutting grade) Plate form: triangular Chipbreaker: double-sided Intended use: turning (longitudinal, facing and profiling) System compatibility: multidirectional turning (AddMultiTurn) System composition: holder, indexable inserts and clamping system FAQ What materials is this insert suitable for? This TNGG160408 GH110 Tungaloy indexable insert is specified for turning applications; the GH110 grade is formulated to balance wear resistance and toughness for a broad range of turning tasks. Can the insert be used for profiling and facing operations? Yes, the triangular geometry and the 60° cutting angle make the insert appropriate for longitudinal turning, profiling and facing within a multidirectional turning set-up. How does the cylindrical hole benefit clamping? The cylindrical hole ensures positive location and reliable clamping in compatible holders, which improves repeatability and reduces the risk of misalignment during indexing. What are the plate dimensions and how do they affect rigidity? The plate measures 16 mm with a thickness of 4.76 mm; this proportion provides sufficient rigidity for general turning tasks while allowing convenient indexing and handling. Is the GH110 grade suitable for demanding production? GH110 is a Tungaloy grade developed to combine wear resistance, edge stability and adequate toughness, supporting consistent cutting performance in many production environments. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 GH110 Wendeplatten - Tungaloy
Take advantage of the GH110 wear-resistant grade combined with a double-sided chipbreaker and a compact triangular form for secure, productive turning operations; order the insert directly via Metav Werkzeuge or request application advice from our consultants. TNGG160408 GH110 Tungaloy indexable insert for turning — triangular, 60° The TNGG160408 GH110 Tungaloy indexable insert is a triangular, double-sided turning insert with a cylindrical hole, engineered for multidirectional turning within the AddMultiTurn system and suitable for longitudinal, facing and profile turning operations. Triangular insert, 60° cutting geometry GH110 grade for wear resistance and toughness Double-sided chipbreaker for stable chip flow Built for productive multi-directional turning The AddMultiTurn model series places this indexable insert at the heart of a multidirectional turning solution. The GH110 Tungaloy grade balances wear resistance and toughness, delivering consistent performance across varied turning tasks. Manufactured in cemented carbide, the plate provides repeatable cutting-edge behaviour and supports stable machining cycles. The triangular design with a 60° included angle offers positive seating in holders designed for this geometry, enabling efficient material removal while helping to reduce tool-change frequency and setup time. Consistent edge stability and precise chip control With a 0.8 mm radius and a purpose-built double-sided chipbreaker, the insert promotes controlled chip formation and reliable surface results in turning applications. The cylindrical hole and standard clamping interface ensure secure seating and simple indexing of unused edges, while the 4.76 mm plate thickness contributes to stiffness under load. These features together reduce vibration and assist in maintaining edge integrity, which in turn extends usable life and lowers overall process cost per component by reducing scrap and rework. Easy integration into production workflows The insert’s 16 mm size and triangular form suit compact and modular holders within the AddMultiTurn system, providing a predictable replacement cadence for production planning. A free angle of 0° is matched to holders that manage clearance and contact mechanics for turning operations; ensure holder selection aligns with the intended feed direction. For shops seeking higher process reliability and repeatable surface finish, this plate simplifies spare-part management because of its familiar geometry and the proven Tungaloy grade chemistry. For reliable, high-productivity turning with Tungaloy’s GH110 grade, contact Metav Werkzeuge for tailored recommendations or to confirm availability of the TNGG160408 insert Technical data Article number: 6808195 Manufacturer SKU: TUN6808195 Label: TNGG160408 GH110 Tungaloy-Wendeplatte Model series: AddMultiTurn Intended use: Turning Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 60° Free angle: 0° Special features Grade: GH110 (Tungaloy) Material: Cemented carbide Chipbreaker: Double-sided Hole: Cylindrical hole Plate form: Triangular Insert designation: TNGG160408 FAQ What materials is this insert suited for? The TNGG160408 GH110 Tungaloy indexable insert is designed as a versatile turning plate; the GH110 grade provides balanced wear resistance and toughness for a broad range of steel and alloy turning tasks. How many usable cutting edges does the triangular plate provide? The triangular form of the TNGG160408 provides multiple indexable edges; the double-sided geometry allows reorientation to fresh edges, improving economy per insert. What clamping interface is required for this insert? A holder compatible with triangular TNGG-type inserts and a central cylindrical hole is required to secure the TNGG160408 in the AddMultiTurn system. How does the chipbreaker influence machining? The double-sided chipbreaker on the TNGG160408 enhances chip control and promotes stable chip flow, which aids surface quality and reduces the risk of entangling chips in turning operations. Is the insert suitable for profile and facing operations? Yes; the TNGG160408 GH110 insert is intended for longitudinal, plan and profile turning when the feed direction and holder type are matched to the plate geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 GH330 Wendeplatten - Tungaloy
Benefit from the GH330 grade, triangular 16 mm geometry and double-sided chipbreaker for efficient, reliable turning; these attributes combine to deliver consistent surface finish and extended tool life. Order the TNGG160408 insert directly via Metav Werkzeuge or ask our consultants if needed. TNGG 160408 GH330 Tungaloy indexable insert for turning TNGG160408 GH330 is a triangular indexable insert designed for multidirectional turning in the AddMultiTurn system, suitable for longitudinal, facing and profile turning operations. Triangular 16 mm insert format GH330 cutting grade for balanced wear resistance Double-sided chipbreaker for stable chip control Cylindrical hole for secure clamping High-performance cutting for consistent productivity The triangular indexable insert is engineered to provide a reliable combination of wear resistance and edge stability thanks to the GH330 cutting grade from Tungaloy. The triangular form with a 16 mm inscribed circle and a 0.8 mm corner radius offers robust cutting edges for longitudinal and profiling tasks, while the double-sided chipbreaker helps maintain stable chip formation under varying feed conditions. These measurable attributes reduce tool-change frequency and support uninterrupted production runs, helping to increase overall throughput. One insert for multiple directions — fewer tool changes Integrated within the AddMultiTurn multidirectional turning system, this insert supports several machining directions with a single tool family. The combination of a cylindrical hole and the specified 60° geometry ensures secure clamping and repeatable positioning, which simplifies changeovers and shortens setup time. For shops seeking to streamline tooling inventories, the capability to perform facing, longitudinal and profile turning with the same insert geometry translates into lower tool-stock complexity and faster job sequencing. Durable grade and manageable maintenance The Tungaloy GH330 grade balances toughness and hardness to cope with mixed cutting conditions common in workshop practice. As a carbide insert with a thickness of 4.76 mm, it affords mechanical stability during interrupted cuts; being double-sided effectively doubles the available cutting edges per insert, improving cost-efficiency. The 0° relief angle and triangular geometry deliver predictable wear patterns, which simplifies regrinding decisions and disposal planning. Clear, consistent chip control also contributes to safer, cleaner machining and reduced downtime for chip-related issues. Discuss application suitability for the TNGG160408 GH330 insert with Metav Werkzeuge's technical team or request ordering details from Metav Werkzeuge for prompt fulfilment Technical data Article number: 6808222 Manufacturer SKU: TUN6808222 Product label: TNGG160408 GH330 Tungaloy indexable insert System: AddMultiTurn Application: Turning Material: Carbide Numbers Inscribed circle / size: 16 mm Corner radius: 0.8 mm Thickness: 4.76 mm Included angle: 60° Relief angle: 0° Special features Cutting grade: GH330 Shape: triangular Chipbreaker: double-sided Hole: with cylindrical hole Multidirectional turning system compatibility (AddMultiTurn) Manufacturer: Tungaloy FAQ What cutting operations is this insert suited for? The TNGG160408 GH330 insert is intended for turning operations including longitudinal turning, facing and profile turning within multidirectional setups. Which material is the GH330 grade optimised for? The GH330 grade from Tungaloy provides a balance of wear resistance and toughness, making the insert suitable for a broad range of turning tasks where consistent edge performance is required. How does the double-sided chipbreaker benefit shop productivity? A double-sided chipbreaker allows the insert to be indexed to a fresh cutting edge and then reused on its reverse side, effectively increasing the number of available edges and improving cost-efficiency for repetitive production. Can this insert be used in standard toolholders? The TNGG160408 insert uses a cylindrical hole and standard triangular geometry, offering compatibility with holders designed for triangular indexable inserts and the AddMultiTurn multidirectional system. What identifying codes should be referenced when ordering? Use the article number 6808222 or the manufacturer SKU TUN6808222 to ensure the correct Tungaloy TNGG160408 GH330 insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, multidirectional turning capability, and reliable clamping for uninterrupted production. Order or specify the insert directly via Metav Werkzeuge or consult our experts for application support. TNGG160408 GH330 indexable insert for Turning — Tungaloy (60° triangle, 0.8 mm radius) The TNGG160408 GH330 is a triangle-shaped indexable insert designed for multidirectional turning within the AddMultiTurn system, suitable for longitudinal, facing and profile turning. Triangle 60° geometry for versatile turning GH330 grade for wear resistance and toughness Double-sided chipbreaker for stable chip control Cylindrical hole for secure clamping Consistent edge life through engineered carbide grade The combination of cemented carbide construction and the GH330 grade delivers measurable wear resistance while retaining sufficient toughness for varied turning tasks. This balance reduces the frequency of insert changes and supports stable cutting conditions, which in turn helps to maintain part tolerances and minimise unplanned downtime. The engineered grade complements the insert geometry to preserve the cutting edge under continuous production demands. One tool, multiple directions — fewer interruptions Integrated into the AddMultiTurn system, the insert enables multidirectional operations without frequent tool swaps. The 60° triangle geometry and 0.8 mm corner radius allow efficient longitudinal, facing and profiling passes, reducing setup time and boosting throughput. Using a single, versatile insert for several directions supports a leaner tooling inventory and simplifies process planning, making routines on the lathe more efficient and predictable. Secure clamping and reliable chip control for better surfaces A cylindrical hole and the insert’s geometry ensure positive seating and repeatable clamping within the holder and clamping system, improving stability during cuts. The double-sided chipbreaker promotes controlled chip formation across varying cut depths, which contributes to consistent surface finish and process reliability. Stable chip evacuation and secure clamping reduce the risk of workpiece rework and support higher first-pass yield. Speak to Metav Werkzeuge to specify the Tungaloy GH330 grade for this application or to request technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808207 SKU: 6808207-Tungaloy Manufacturer SKU: TUN6808207 Model series: AddMultiTurn Material: Cemented carbide Application: Turning Facts Geometry angle: 60° Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Hole: with cylindrical hole Special features Grade: GH330 Double-sided chipbreaker Triangle plate form Multidirectional turning system compatibility Intended use: Longitudinal, facing and profile turning FAQ What clamping system is required for this insert? The TNGG160408 GH330 indexable insert is supplied with a cylindrical hole for secure seating; it is intended for holders compatible with the AddMultiTurn multidirectional clamping arrangement and the insert geometry. Can the GH330 grade be used for continuous production runs? Yes, the GH330 grade of the TNGG160408 has been selected to balance wear resistance and toughness, making it suitable for sustained turning operations with consistent edge life. Is the insert reversible or single-sided? The triangular TNGG160408 insert is double-sided with a chipbreaker on each cutting edge, allowing multiple indexing positions for extended service life (SKU 6808207-Tungaloy). Which operations are best for this insert geometry? The 60° triangle shape and 0.8 mm corner radius are well suited to longitudinal turning, facing and light profiling within a multidirectional setup; the design reduces tool changes in mixed-operation production. Does the insert require a specific holder orientation? The insert is designed for the AddMultiTurn multidirectional turning system; correct holder and clamping orientation should be observed to secure seating via the cylindrical hole and achieve optimal cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 GH330 Wendeplatten - Tungaloy
Take advantage of the GH330 grade and the multidirectional AddMultiTurn concept to combine wear resistance, edge stability and simplified tool handling for uninterrupted turning operations. Order the insert directly via Metav Werkzeuge or consult the technical advisers for application-specific recommendations. TNGG160408 GH330 Tungaloy indexable insert — Triangular turning insert for multidirectional turning The TNGG160408 GH330 is a triangular indexable turning insert designed for multidirectional turning applications within the AddMultiTurn system. Tungaloy GH330 grade for balanced wear and toughness Triangular 16 mm insert, 60° cutting angle Double-sided chipbreaker for flexible cutting Cylindrical hole with 4.76 mm thickness for secure clamping Increased productivity through multidirectional turning The AddMultiTurn series is engineered as a multidirectional turning system, enabling several cutting directions with a single tool assembly. This approach reduces tool changes and downtime while maintaining process stability. The combination of a robust carbide substrate and the GH330 cutting grade supports consistent performance under varied turning conditions, delivering measurable gains in machining throughput and lower overall tool costs. The multidirectional setup leads to improved cycle times without sacrificing repeatability. Stable cutting edge and consistent surface quality The triangular geometry with a 60° cutting angle and a 0.8 mm corner radius produces a predictable cutting action that favours steady chip formation. The double-sided chipbreaker controls chip flow on both sides of the insert, which reduces the risk of chip re-cutting and helps achieve a reliable surface finish. The GH330 grade is formulated to balance wear resistance and toughness, extending edge life where intermittent cuts or variable cutting directions are required. For those less familiar with chipbreakers: they are engineered grooves that fragment long chips into manageable lengths, improving safety and surface consistency. Secure clamping and simple system integration The insert is supplied with a cylindrical hole and a plate thickness of 4.76 mm, enabling positive clamping in AddMultiTurn holders and ensuring reproducible seating under cutting loads. The system comprises the holder, indexable plates and a clamping mechanism; integration is straightforward where holders are specified for the AddMultiTurn series. The double-sided nature of the plate allows rotation to a fresh cutting edge, supporting economical use of each insert in production and maintenance contexts. Technical documentation and application guidance are available for process parameter selection and holder compatibility. Contact Metav Werkzeuge for original Tungaloy GH330 inserts for dependable multidirectional turning; technical advice and ordering assistance are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6808199 Manufacturer SKU: TUN6808199 Manufacturer article number: 6808199 Model series: AddMultiTurn Material: Carbide Core specifications Insert designation: TNGG160408 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 60° Relief angle: 0° Special features Grade/coating: GH330 Insert shape: Triangular Chipbreaker: Double-sided Hole style: Cylindrical hole Intended application: Turning (multidirectional) FAQ What applications is this insert suited for? The TNGG160408 GH330 indexable insert is intended for turning tasks within a multidirectional AddMultiTurn setup, covering longitudinal, facing and profile turning operations. How does the GH330 grade affect performance? GH330 provides a balanced combination of wear resistance and toughness; the grade enhances edge stability and supports longer tool life under varying cutting conditions. Can the plate be rotated to use multiple cutting edges? Yes, the triangular geometry together with the double-sided chipbreaker permits rotation to alternative cutting edges, enabling economical utilisation of each plate. What clamping interface is required for proper seating? A holder compatible with the AddMultiTurn system and the insert’s cylindrical hole is required to ensure secure clamping and reproducible seating under load. Is the insert suitable for precision surface finishes? The combination of the 60° geometry, 0.8 mm corner radius and the double-sided chipbreaker supports consistent chip control and contributes to improved surface quality in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of the AddMultiTurn multidirectional system, the GH330 carbide grade and precise 60° geometry for stable, productive turning. Benefit from secure clamping and predictable chip control to keep cycle times low and component quality high. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific guidance. TNGG160408 GH330 Tungaloy indexable insert for turning (60°) The TNGG160408 GH330 is a triangular indexable insert engineered for multidirectional turning within the AddMultiTurn system, optimised for longitudinal, facing and profile operations. Triangular 60° geometry GH330 grade for wear resistance Double-sided chipbreaker Cylindrical hole for secure clamping Reduce setup time and increase throughput with multidirectional turning The AddMultiTurn concept enables multiple cutting directions with a single tool body, minimising tool changes and reducing machine idle time. This triangular indexable insert with a 60° included angle offers consistent engagement for longitudinal, facing and profile turning, so the process becomes more predictable. The design supports stable cutting forces, which helps to reduce vibration and extend the usable life of both tool and holder. For shops aiming to raise productivity without complex retooling, this approach delivers measurable time savings and smoother production flows. GH330 carbide grade: balanced wear resistance and toughness Tungaloy’s GH330 carbide grade combines abrasion resistance and edge stability, which is especially useful where mixed operations demand both durability and fracture resistance. In practice, this means longer intervals between indexings and a more even deterioration of the cutting edge, resulting in a reliable surface finish over serial production. For components where repeatability and tool life are critical, the grade reduces unexpected downtime and contributes to lower overall production costs through fewer interruptions. Secure clamping and chip control for reliable part quality The insert’s cylindrical hole and compatible clamping geometry ensure reproducible seating and secure retention in the holder, which reduces micro‑movement during cuts. The integrated double-sided chipbreaker promotes manageable chip formation across a range of feeds and depths, supporting safer chip evacuation and more consistent surface integrity. With a corner radius of 0.8 mm and a relief angle of 0°, operators can expect controlled engagement that helps maintain dimensional accuracy while avoiding excessive edge wear. Application guidance and system compatibility for dependable results Designed for turning within the AddMultiTurn system, the insert is intended for longitudinal, facing and profile tasks where a triangular form and multiple usable cutting edges are advantageous. The system comprises holder, indexable inserts and a clamping mechanism; selecting a matching holder and correct clamping torque is essential for optimal performance. When process parameters or workpiece materials vary, consult technical documentation or our specialists to align feeds and speeds with component tolerances. If uncertainty exists about suitability for a specific material or cycle, technical advice is available to clarify expected outcomes. For product suitability and ordering of the TNGG160408 GH330 insert, contact Metav Werkzeuge for an application assessment or to request detailed machining data via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808212 Manufacturer SKU: TUN6808212 SKU: 6808212-Tungaloy Model series: AddMultiTurn Material: carbide Grade: GH330 Intended application: turning Insert designation: TNGG160408 Dimensions & core data Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Special features Triangular plate form Double-sided chipbreaker Cylindrical hole Multidirectional AddMultiTurn system Suitable for longitudinal, facing and profile turning Tungaloy GH330 carbide grade Indexable insert FAQ What applications is this insert intended for? The TNGG160408 GH330 insert is intended for turning, including longitudinal, facing and profile operations within the AddMultiTurn multidirectional system. Which material does the GH330 grade suit best? GH330 is a Tungaloy carbide grade chosen for a balance of wear resistance and toughness, making it suitable for mixed cutting conditions where edge stability and longevity are required. How does the triangular 60° geometry affect cutting? The 60° triangular geometry provides defined engagement angles for profile and longitudinal cuts, offering multiple usable edges and predictable cutting forces that support dimensional stability. Is the insert compatible with standard clamping systems? The insert has a cylindrical hole and is designed for secure seating in compatible holders; correct clamping torque and the appropriate holder type are necessary for reliable performance. What corner radius and thickness should be considered for finishing? This insert features a corner radius of 0.8 mm and a plate thickness of 4.76 mm, which aids in maintaining surface finish while providing sufficient strength for semi‑finishing and general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 GT9530 Wendeplatten - Tungaloy
Take advantage of a coated cermet grade and a 0.8 mm corner radius to achieve reliable finishing performance and extended tool life in stable turning setups; order directly via Metav Werkzeuge or contact our consultants for application advice. TNGG160408 GT9530 — Tungaloy triangular indexable insert for turning, coated cermet, R 0.8 mm A TNGG160408 GT9530 triangular insert designed for multidirectional turning in the AddMultiTurn system, optimised for finishing to light and general-purpose steel. Coated cermet grade GT9530 for durable finishing Triangular 16 mm insert with 60° cutting geometry 0.8 mm corner radius for fine surface quality Double-sided chipbreaker, cylindrical hole design Predictable finishing and extended tool life The GT9530 is a coated cermet grade developed for wear-resistant finishing to light and general-purpose steel. Its chemistry and coating combination provide a stable cutting edge that favours consistent surface finish and longer tool life under steady cutting conditions. Cermet grades excel where fine finishes are required because they retain edge sharpness at moderate cutting speeds; this reduces downstream grinding and saves time on finishing operations. Reduced setup time through multidirectional capability Integrated into the AddMultiTurn model series, this insert supports multidirectional turning, allowing a single geometry to be used for longitudinal, facing and light profiling passes without frequent tool changes. The system concept—holder, changeable inserts and clamping mechanism—reduces machine downtime and simplifies tool management. For production environments seeking higher throughput, that means fewer interruptions and better utilisation of turning centres. Geometry engineered for consistent accuracy and chip control The insert’s 60° geometry and 0.8 mm corner radius balance cut strength and surface integrity: a larger corner radius improves edge robustness, while the modest 0.8 mm radius still produces a high-quality finish. The double-sided chipbreaker gives reliable chip formation and evacuation, essential for stable cutting and predictable tool behaviour. A cylindrical hole and a thickness of 4.76 mm ensure secure clamping and repeatable positioning in compatible holders, supporting dimensional consistency across batches. Practical guidance for integration and performance Designed for turning applications, including longitudinal, facing and profiling operations, the insert fits into multi-directional holders intended for the AddMultiTurn system and works best under stable cutting conditions—steady feeds, consistent depths of cut and appropriate coolant or misting where required. The tungsten carbide substrate provides the base strength needed for normal shop use; when paired with correct holder selection and machine rigidity, the result is improved process stability and dependable component quality. The TNGG160408 GT9530 insert is especially suitable where surface finish and repeatability are priorities. For precision finishing with extended tool life choose the GT9530 grade from Tungaloy — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6997780 Manufacturer SKU: TUN6997780 Category: Indexable insert Model series: AddMultiTurn Material: Carbide Facts Radius: 0.8 mm Inscribed circle: 16 mm Thickness: 4.76 mm Cutting angle: 60° Clearance angle: 0° Special features Coated cermet grade GT9530 Double-sided chipbreaker Triangular insert with cylindrical hole Multidirectional turning application Suitable for finishing to light and general-purpose steel FAQ What materials is this insert suitable for? The TNGG160408 GT9530 insert is tailored for finishing and light general-purpose turning of steel; its coated cermet composition favours excellent surface quality on such materials. Is the insert reversible and how many indexable edges are available? The triangular shape with a double-sided chipbreaker provides multiple usable edges; the design allows turning over to use alternate cutting corners, enhancing tool economy. Which holder system is required for correct use? The insert is intended for use in holders compatible with the AddMultiTurn multidirectional turning system; holders must secure the cylindrical hole and support the 4.76 mm plate thickness. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius offers a compromise between edge strength and surface finish: it reduces edge chipping risk while maintaining the ability to produce a fine surface without excessive cutting forces. Can this insert be used for profiling passes as well as facing and turning? Yes, the geometry and chip control are suitable for light profiling as well as longitudinal and facing operations, provided cutting parameters remain within stable ranges for the grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 GT9530 Wendeplatten - Tungaloy
Benefit from a wear-resistant GT9530 coated cermet grade, a compact triangular form with a 0.8 mm corner radius and compatibility with the AddMultiTurn multidirectional turning system — combine precise finishing, longer tool life and simplified tool management; order via Metav Werkzeuge or consult our advisors for application support. TNGG160408 GT9530 triangular indexable insert for turning (Tungaloy) A TNGG160408 GT9530 triangular indexable insert engineered for multidirectional turning, offering stable finishing performance and straightforward integration into AddMultiTurn tool systems. Coated cermet grade GT9530 Triangle form with 60° cutting angle Double-sided chipbreaker, cylindrical hole 0.8 mm corner radius for fine finish Stable finishing through wear‑resistant material and geometry The combination of a coated cermet grade and a triangular geometry delivers consistent surface quality in finishing and light universal turning. The GT9530 grade is formulated for wear resistance, which extends tool life under steady cutting conditions and reduces the frequency of insert changes. A 0.8 mm corner radius moderates cutting forces for improved surface integrity while the 60° angle supports fine profile definition. This technical balance is aimed at shops that prioritise predictable tool performance and reduced process interruptions. Multidirectional capability for versatile turning operations Designed for the AddMultiTurn multidirectional system, the insert supports longitudinal, facing and profile turning with a single tool set-up. The triangular form enables multiple indexable edges, and the double-sided chipbreaker provides reliable chip control across different feed directions. Use in a compatible holder and clamping system allows quick direction changes without compromising clamping stability, which simplifies tool inventory and shortens machine downtime for setup changes. Robust design for secure clamping and practical handling A plate thickness of 4.76 mm and the presence of a cylindrical hole ensure secure clamping in the holder and contribute to repeatable positioning during index changes. The insert’s 0° clearance angle denotes a neutral relief geometry suited to finishing cuts under stable support; the reversible, double-sided design helps to multiply usable cutting edges per insert. Integration into existing tool systems is straightforward thanks to standard ISO sizing and a compact triangular profile that balances rigidity with accessibility for accurate depth-of-cut control. For application advice, availability and to specify the GT9530 grade for your process, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best toolholder combinations and delivery options. Technical data Article number: 6997779 Manufacturer SKU: TUN6997779 SKU: 6997779-Tungaloy Model series: AddMultiTurn Core data ISO designation: 160408 Size: 16 Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Cutting angle: 60° Hole style: cylindrical Features Material: cemented carbide Grade: GT9530 (coated cermet) Shape: triangular Chipbreaker: double-sided With hole: yes Intended application: Turning FAQ What materials is this insert suited to machine? The TNGG160408 GT9530 insert from Tungaloy is a coated cermet grade designed primarily for machining steel in finishing and light universal applications where good surface finish and extended tool life are required. Is the insert reversible and how does that affect cost efficiency? Yes, the triangular, double-sided design provides multiple indexable edges; the reversible nature increases usable cutting edges per insert, improving overall cost efficiency for batch and serial production. Can this insert be used in multidirectional tool systems? The insert is intended for the AddMultiTurn multidirectional turning system and is compatible with holders that accept the TNGG160408 form, enabling longitudinal, facing and profiling with a single tool set-up. What significance does the 0.8 mm corner radius have for surface finish? A 0.8 mm corner radius helps to moderate cutting forces and supports improved surface quality during finishing passes, reducing the likelihood of edge chipping under stable cutting conditions. Which identifier should be referenced when ordering the insert? Reference the article number 6997779 or the manufacturer SKU TUN6997779 when specifying the TNGG160408 GT9530 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of high-precision finishing, stable wear behaviour and compatibility with multidirectional turning systems for efficient serial production; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNGG 160408 NS520 triangular insert for turning — Tungaloy, 60° geometry, 0.8 mm radius TNGG160408 NS520 is a triangular indexable insert designed for finishing and light machining in turning applications, offering a cermet grade optimised for surface quality and dimensional stability. Cermet grade NS520 for finishing Triangular insert, 16 mm size Double-sided chipbreaker for consistent chips Compatible with multidirectional turning systems Precision finishing and consistent surface quality The cermet NS520 is tailored for finishing and light machining of steel, delivering a balance between wear resistance and surface integrity. The insert’s geometry — a triangular insert with a 0.8 mm radius and a 60° approach angle — supports stable cutting forces that contribute to repeatable dimensional accuracy and fine surface results. For production environments where component tolerance and finish matter, this combination reduces rework and inspection effort. Reliable chip control and flexible mounting for multi-directional turning Designed for the AddMultiTurn multidirectional turning system, the insert’s double-sided chipbreaker and cylindrical hole enable secure clamping and predictable chip formation across multiple cutting directions. The 0° relief angle and defined plate thickness provide consistent engagement with the workpiece, simplifying process setup and lowering the risk of unexpected tool behaviour when changing feed direction or toolholder orientation. Durable cermet substrate for uniform wear and accuracy The cutting material—a cermet or coated cermet—is selected to maintain a sharp edge with slow, even wear. This results in stable tool life and consistent component quality over longer batch runs. Where surface finish and dimensional repeatability are priorities, the material properties of NS520 support fewer interruptions for insert changes and contribute to predictable maintenance intervals, improving overall process uptime. System compatibility and straightforward integration As part of a modular system comprising holder, indexable inserts and a clamping mechanism, this insert integrates into conventional tool setups without additional complexity. The geometry and hole design facilitate quick indexing and secure clamping in compatible toolholders, enabling efficient changeovers and minimal setup time. For workshops adopting multidirectional turning strategies, the insert provides a practical route to higher productivity with lower operator intervention. Contact Metav Werkzeuge for application advice and to confirm suitability for specific turning tasks; reach the team at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations. Technical Data Article number: 6808214 Manufacturer SKU: TUN6808214 Model series: AddMultiTurn Brand: Tungaloy SKU: 6808214-Tungaloy Specifications Radius: 0.8 mm Approach angle: 60° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 16 mm Shape: triangular Hole style: cylindrical hole Features & Materials Material: cemented carbide substrate Cutting material: cermet or coated cermet Grade: NS520 Chipformer: double-sided chipbreaker Application: turning (finishing to light machining) System use: multidirectional turning system (AddMultiTurn) FAQ What machining tasks is this insert intended for? The TNGG160408 NS520 insert is intended for turning, specifically finishing and light machining of steel where surface quality and dimensional accuracy are required. Can the insert be indexed to use multiple cutting edges? Yes, the triangular shape and double-sided design allow multiple indexings, providing several cutting edges before replacement. How does the NS520 grade benefit production runs? NS520 combines the cutting-edge stability of a cermet grade with controlled wear, which promotes consistent surface finish and extends the interval between insert changes. Is the insert compatible with multidirectional turning toolholders? The insert is designed for integration into the AddMultiTurn multidirectional turning system and similar holders that accept a 16 mm triangular insert with a cylindrical hole. What material forms are suitable for this insert? This insert is optimised for steel finishing; the cermet grade is chosen to balance surface quality and wear resistance when turning steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 NS520 Wendeplatten - Tungaloy
Efficient finishing and consistent dimensional control result from the combination of the NS520 cermet grade and the AddMultiTurn multidirectional turning concept; this improves surface quality while maintaining even tool wear. Order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNGG 160408 NS520 triangular indexable insert for turning — Tungaloy The TNGG160408 NS520 is a triangular indexable insert designed for multidirectional turning in the AddMultiTurn system, optimised for finishing to light machining of steel. Multidirectional turning capability Cermet grade NS520 for fine finishes Triangular geometry with 60° cutting angle Double-sided chipbreaker for even wear Delivering consistent surface quality with fewer setups The AddMultiTurn concept pairs a versatile holder design with interchangeable inserts to enable machining in multiple directions using a single tool system. The combination of this multidirectional setup with a cermet cutting grade reduces the need for frequent tool changes and complex fixturing, which improves process efficiency on batch and single-piece production runs. By integrating the insert into a stable clamping arrangement, the system supports predictable tool life and repeatable component geometry. Material grade engineered for finishing and dimensional stability The NS520 grade, a cermet or coated cermet option, is crafted for finishing to light machining of steel and focuses on surface finish and dimensional accuracy. Cermet substrates combine ceramic hardness with metallic toughness, which helps maintain a sharp edge during fine cuts and promotes uniform wear across edges. This results in reliable workpiece tolerances and reduced rework, particularly where an excellent surface texture is essential for subsequent processes. Geometry that balances edge strength and cutting precision The triangular insert features a nominal 60° cutting angle and a 0.8 mm radius, giving a compromise between edge robustness and fine-profile capability. The plate is double-sided and includes a double-sided chipbreaker, allowing two indexed edges per face and helping to distribute wear symmetrically. A cylindrical centre hole supports secure clamping in compatible holders, ensuring repeatable seating and stable cutting conditions even under intermittent engagement or profiling passes. Practical applications and process benefits Intended primarily for turning operations — including longitudinal, facing and profiling cuts — this insert is suited to shops seeking improved surface integrity with controlled material removal. The design benefits shops that prioritise consistent finishing results, reduced machine downtime, and predictable changeover behaviour. When paired with the AddMultiTurn holder family and a matching clamping system, the insert contributes to fewer tool assemblies, simplified inventory and a smoother production flow. For application-specific selection or integration advice on the TNGG160408 NS520 triangular indexable insert from Tungaloy, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6808196 Manufacturer SKU: TUN6808196 SKU: 6808196-Tungaloy Designation: TNGG160408 Model series: AddMultiTurn Manufacturer: Tungaloy Core specifications Insert size: 16 Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Cutting angle: 60° Hole: with cylindrical hole Features & materials Material: carbide Grade: NS520 (cermet / coated cermet option) Plate form: triangular Chipbreaker: double-sided Application: turning (longitudinal, facing, profiling) System compatibility: AddMultiTurn multidirectional turning system FAQ What materials is this insert suitable for? The TNGG160408 NS520 triangular indexable insert from Tungaloy is designed primarily for finishing to light machining of steel, delivering improved surface finish and dimensional stability. What are the key geometric specifications of the insert? The plate presents a 60° cutting angle, a 0.8 mm corner radius and a plate thickness of 4.76 mm; the design includes a cylindrical centre hole to ensure secure clamping with compatible holders. Is the insert reversible or single-use per side? This triangular insert is double-sided with a double-sided chipbreaker, offering multiple indexed edges for cost-effective use and even wear distribution in serial production. Which operations benefit most from this insert? Longitudinal turning, facing and profiling operations benefit from the NS520 grade and triangular geometry, particularly where fine surface quality and tight dimensional control are required. Can this insert be used in existing clamping systems? The TNGG160408 is intended for use in the AddMultiTurn multidirectional system and compatible holders that accept triangular inserts with a cylindrical centre hole; correct holder and clamping selection ensures optimal performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp uncoated cermet grade for superior surface finish, a 60° triangular geometry for multidirectional turning, and robust chip control for stable, repeatable results; order directly via Metav Werkzeuge or consult the technical team for application support. TNGG160408 NS9530 Tungaloy indexable insert for turning — triangular 60°, 0.8 mm radius The TNGG160408 NS9530 is a triangular indexable insert designed for multidirectional turning in the AddMultiTurn system, optimised as a finishing grade for steel with a sharp cutting edge and consistent surface quality. Uncoated cermet NS9530 for fine finishing Sharp cutting edge with low cutting forces Triangular 60° insert, 16 mm size Double-sided chipbreaker with cylindrical hole Precise finishing performance with low cutting forces The insert’s core advantage is its uncoated cermet composition, grade NS9530, engineered specifically for finishing operations in steel. Cermet combines ceramic and metallic binders to deliver a fine-grain cutting edge that sustains a sharp profile through continuous cuts, resulting in low cutting forces and a noticeably high surface finish. For applications where small depths of cut and consistent part quality matter, this material reduces the need for secondary grinding and supports predictable process capability. Multidirectional turning capability for flexible tool setups Built for the AddMultiTurn model series, the geometry enables a true multidirectional turning system: one tool assembly handles longitudinal, facing and profiling directions without compromising edge stability. The triangular 60° geometry offers multiple indexed corners, making the insert an efficient choice where frequent indexing and quick position changes are required. The indexable design supports process flexibility while keeping machine downtime and tool-change complexity to a minimum. Reliable chip control and secure clamping for steady cuts Practical details influence real-world machining. The insert features a double-sided chipbreaker and a cylindrical hole for positive clamping and consistent chip formation, even under finishing feeds. The geometry includes a 0.8 mm corner radius and a 0° clearance angle, paired with a plate thickness of 4.76 mm and a 16 mm seat size, which together improve contact stability and reduce vibration. Stable chip evacuation and firm clamping translate into repeatable surface quality and safer, more efficient production runs. Economic advantages and recommended applications As a finishing grade for steel, this insert reduces cycle time per part by enabling higher feed stability and fewer rework steps; the combination of the sharp cutting edge and controlled chipbreaking decreases tool-related variability. The TNGG160408 NS9530 insert is particularly suited to continuous cutting and small material removals where surface specification and dimensional consistency are priority outcomes. The design supports longer intervals between indexings and contributes to lower overall machining costs through reduced secondary operations. For precision finishing in steel, request the Tungaloy TNGG160408 NS9530 insert from Metav Werkzeuge or contact Metav Werkzeuge’s technical advisors at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application guidance Technical data Article number: 6997855 Manufacturer SKU: TUN6997855 SKU: 6997855-Tungaloy Model series: AddMultiTurn Material: carbide Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 16 mm Geometry angle: 60° Relief/clearance angle: 0° ISO designation: 160408 Special features Grade: NS9530 (uncoated cermet) Insert form: triangular Chipbreaker: double-sided Hole style: cylindrical hole Application: turning Typical use: finishing in steel System components: holder, indexable inserts and clamping system FAQ What materials is this insert best suited for? The TNGG160408 NS9530 is specified as a finishing grade for steel and performs best in continuous cutting applications where a sharp edge and high surface quality are required. How does the NS9530 cermet differ from coated carbide grades? NS9530 is an uncoated cermet focusing on edge retention and surface finish; compared with coated carbides it typically delivers better finish at finishing feeds while requiring appropriate cutting parameters for optimum life. Is the insert indexable on multiple corners? Yes. The triangular 60° shape provides multiple indexable corners, enabling quick corner changes within the AddMultiTurn system to reduce downtime. What chip control features are included? A double-sided chipbreaker and cylindrical hole support consistent chip formation and secure clamping, improving evacuation and reducing the risk of built-up edge during finishing. Which series and system is this insert part of? This insert belongs to the AddMultiTurn model series and is intended for multidirectional turning systems that use a holder, indexable plates and a clamping mechanism. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the product information lists both "carbide" and "uncoated cermet" as the cutting material, which is contradictory and could lead to confusion or misinterpretation when assessing the product's properties or intended applications. Please verify the source data thoroughly to ensure accuracy and eliminate any discrepancies, as providing clear and precise material specifications is essential for creating a complete, accurate, and reliable product description that meets the expectations of potential users or customers. Ensuring consistency in the data will also help maintain the credibility and professionalism of the product documentation and prevent any misunderstandings during its use or evaluation.
TNGG 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a dedicated finishing grade, low cutting forces and compatibility with multidirectional holders for a stable production flow; order the insert directly via Metav Werkzeuge or consult their advisors for application-specific guidance. TNGG160408 NS9530 indexable turning insert, triangular 60° – Tungaloy A TNGG160408 NS9530 triangular indexable insert developed for finishing operations in multidirectional turning systems, suitable for longitudinal, face and profile turning applications. Cermet finishing grade NS9530 Sharp cutting edge for low cutting forces Triangular 60° geometry with 0.8 mm radius Double-sided chipbreaker, with cylindrical hole Superior finishing performance for demanding steel turning The uncoated cermet grade NS9530 is designed as a finishing sort with a particularly sharp cutting edge, producing low cutting forces and an improved surface condition on steel. In practical terms this means fewer vibrations at small depths of cut, consistent surface roughness after each pass and reduced need for secondary finishing. The insert’s composition promotes a stable metal‑cutting interface during continuous cutting operations, delivering predictable outcomes in serial production. Flexible integration into multidirectional turning cells Part of the AddMultiTurn model series, the insert is optimised for multidirectional turning set-ups where a single tool must cover several machining directions. Its triangular insert form with a 60° included angle and a 0.8 mm corner radius allows straightforward indexing for multiple cutting edges. The plate is supplied with a cylindrical hole to fit standard clamping systems; this enables quick mounting in the holder and repeatable positioning when reindexing, supporting efficient changeovers in mixed‑operation cells. Reliable chip control and stable process behaviour Equipped with a double-sided chipbreaker, the insert provides controlled chip formation during finishing cuts and small feed rates, which reduces the risk of built‑up edge and improves tool life consistency. The 0° relief angle and precise plate thickness ensure secure seating in compatible holders, while the stable edge geometry supports reliable performance across repeated cycles. Together, these attributes contribute to higher first‑pass yield and lower rework rates in production environments. For specialised advice on integrating the TNGG160408 NS9530 insert into an existing turning cell or for assistance selecting the appropriate holder, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930; Metav Werkzeuge can provide application guidance and order support. Technical Data Article number: 6997854 Manufacturer SKU: TUN6997854 Brand SKU: 6997854-Tungaloy Model series: AddMultiTurn Material: Cemented carbide Core data Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Hole: with cylindrical hole Special features Uncoated cermet NS9530 Finishing grade for steel Sharp cutting edge, low cutting forces Double-sided chipbreaker Triangular geometry (TNGG) Compatible with multidirectional turning systems FAQ What materials is this insert intended for? The TNGG160408 NS9530 insert is a finishing grade designed primarily for use on steel and achieves high surface quality under continuous cutting and small depths of cut. Can the insert be used in multidirectional turning systems? Yes, the insert is part of the AddMultiTurn series and is specifically intended for multidirectional turning applications where one tool covers several machining directions. How is chip control achieved with this geometry? Chip control is provided by the double‑sided chipbreaker and the sharp cutting edge of the NS9530 cermet, which together promote short, manageable chips during finishing passes. What are the key dimensional data needed for holder selection? Relevant dimensions include the 16 mm size, 4.76 mm plate thickness, 0.8 mm corner radius and the 60° included angle; these values determine compatibility with an appropriate TNGG holder. Is the insert supplied with a hole for clamping? Yes, the plate is supplied with a cylindrical hole for secure clamping and repeatable indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com