TNGG 160404 GH110 Wendeplatten - Tungaloy
Take advantage of the ISO-standard geometry and the GH110 Tungaloy grade for a balance of wear resistance and toughness; the triangular form with a 60° included angle and a 0.4 mm corner radius ensures reliable external and internal turning. Order the insert directly via Metav Werkzeuge or request application advice from the consultants at Metav Werkzeuge. TNGG160404 GH110 – triangular turning insert, 60° (Tungaloy) A TNGG160404 GH110 indexable insert designed for ISO-compatible external and internal turning, combining a robust carbide grade with a double-sided chipbreaker for productive machining. ISO 60° triangular insert with centre hole GH110 grade for wear resistance and edge stability 16 mm inscribed circle and 0.4 mm corner radius Compatible with ISO turning holders and boring bars Predictable integration into ISO tool systems for steady output The ISO-standard design allows straightforward integration into common turning holders and boring bars, so tooling setups remain consistent across production lines. Compatibility is defined by form, relief angle (0°), tolerance class, fastening method, size and thickness; this reduces setup variation and supports repeatable machining cycles. The central, cylindrical hole enables secure clamping, while the standardised dimensions simplify tool inventory planning and reduce machine downtime. Material grade engineered for longer tool life and stable cutting edges The Tungaloy GH110 carbide grade emphasises a combination of wear resistance and toughness, giving greater edge stability under typical turning conditions. This balance helps to maintain cutting performance over longer tool life, which in turn contributes to consistent surface finish and reduced index changes. For many turning tasks, the grade’s properties permit productive feeds and speeds without sacrificing reliability, improving overall process economy. Geometry that supports versatile turning and simple tool selection The triangular plate with a 60° included angle and 0.4 mm corner radius is well suited to general turning tasks where a compromise between edge strength and accessibility is required. The 16 mm inscribed circle and 4.76 mm thickness give a compact but rigid profile, and the double-sided chipbreaker provides two usable cutting edges per index, optimising cost per edge. These geometrical choices allow straightforward selection of a chipbreaker and grade to match the workpiece stability and desired surface quality. Practical workshop handling and application advice for process security Designed for both external and internal turning, this indexable plate forms part of a system comprising the insert, a matching external holder or boring bar, a shim/clamp pack and retaining screw. Correct pairing of holder form and tolerance class with the plate’s dimensions is essential for secure seating and vibration control. If assistance is required in matching holders or choosing a chipbreaker for specific machining tasks, Metav Werkzeuge can provide technical guidance and selection support to ensure process security and productivity. Contact Metav Werkzeuge for availability and application guidance on the Tungaloy TNGG160404 GH110 insert — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 6808179 Manufacturer SKU: TUN6808179 SKU: 6808179-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Inscribed circle (IC): 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 60° Special features Material: carbide Grade: GH110 (Tungaloy) Shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Intended use: turning System components: insert, holder or boring bar, shim/clamp, retaining screw FAQ What turning applications suit this insert? The TNGG160404 GH110 insert from Tungaloy is intended for general external and internal turning where a balance of edge strength and accessibility is required; chipbreaker and grade selection should be matched to the specific task. What are the key dimensions to check before selecting a holder? Check the 16 mm inscribed circle, 4.76 mm thickness, 0.4 mm corner radius and the 60° included angle to ensure the holder form, relief angle and fastening arrangement provide secure seating. What does the GH110 grade offer in practice? GH110 delivers a combination of wear resistance and toughness that supports stable cutting-edge performance under a range of turning conditions, helping to extend index life and maintain surface quality. Is the insert indexable on both sides? Yes, the design features a double-sided chipbreaker so the plate can be indexed to use additional cutting edges, improving cost-efficiency per edge. How is the insert secured in the toolholder? The plate is located and clamped via its central cylindrical hole and a suitable clamp or screw; compatibility depends on form, relief angle, tolerance class, fastening type, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 GH110 Wendeplatten - Tungaloy
Benefit from stable cutting performance and long tool life through the combination of the GH110 carbide grade, a precise 0.4 mm corner radius and a 0° clearance angle; order the insert directly via Metav Werkzeuge or request tailored advice from our consultants. TNGG 160404 GH110 Turning Indexable Insert — Tungaloy, triangular ISO 16 mm, 0.4 mm radius A TNGG160404 GH110 indexable insert designed for precision turning, offering a double-sided chipbreaker and a cylindrical hole for secure mounting in compatible holders ISO triangular 16 mm insert Cemented carbide grade GH110 Double-sided chipbreaker for stability 0.4 mm corner radius, 0° clearance Consistent cutting performance for productive turning The combination of cemented carbide construction and the GH110 grade delivers a balance of wear resistance and toughness that reduces unplanned tool changes. For routine external and internal turning, this geometry stabilises the cutting edge and extends service intervals, which directly supports higher machine uptime. The insert’s material composition is optimised for repeatable performance under varying cutting conditions, helping to maintain dimensional accuracy over longer production runs. Precision geometry for repeatable component quality Designed in the ISO 160404 triangular format, the insert’s 16 mm size and 0.4 mm corner radius produce predictable surface finishes while the 0° clearance supports light- to medium-depth turning with minimal risk of rubbing. The 60° included angle gives a reliable cutting profile suited to many common turning tasks. These geometric parameters simplify process planning: knowing the clearance angle and corner radius allows engineers to estimate feed rates and surface roughness with greater confidence. Secure clamping and flexible setup reduce downtime The insert is supplied with a cylindrical hole, facilitating straightforward positioning and secure fastening in appropriately matched holders and clamp kits. Compatibility is determined by form, clearance, tolerance class, fastening method, size and thickness, which enables quick tool changes when the toolholder system is standardised. The double-sided chipbreaker design increases usable indexing options and contributes to stable chip control, particularly in interrupted or varying-turning operations. Match grade and chipbreaker to the workpiece for best results Selecting the correct chipbreaker and carbide grade is essential: the GH110 grade complements the insert geometry by prioritising edge stability and wear life, while the chipbreaker style suits a range of cutting conditions. For softer or gummy materials, a different chip control geometry may improve evacuation; for harder or abrasive stock, GH110 helps maintain a sharp edge. For guidance on the optimal pairing of insert geometry and grade to a specific component, consult the technical notes or request a process recommendation. For a personalised application assessment or to secure supply of the TNGG160404 GH110 turning inserts, contact Metav Werkzeuge for availability checks and tailored machining advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6808173 Manufacturer SKU: TUN6808173 Our SKU: 6808173-Tungaloy Model series: ISO turning indexable inserts Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 60° ISO code: 160404 Special features Material: cemented carbide Carbide grade: GH110 Shape: triangular Hole: cylindrical hole (with hole) Chipbreaker: double-sided Application: turning (external and internal) System components: insert, suitable external holder or boring bar, shim/clamp set, spare screws FAQ Which toolholders are compatible with this insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; use holders specified for ISO 160404 triangular inserts to fit the TNGG160404 GH110 insert. Which machining operations suit this insert best? The insert is intended for turning operations, including both external and internal turning; select the appropriate chipbreaker and holder for the specific turning task. What does the GH110 grade signify? GH110 is a Tungaloy carbide grade formulated to combine wear resistance with sufficient toughness, supporting stable cutting edges and reliable tool life in a range of turning scenarios. How is the insert secured in the holder? The triangular insert is located and clamped using its cylindrical hole and the correct clamp set or screw; the system requires a matching holder and shim to ensure proper clamping and repeatable positioning. Does the double-sided design increase service life? The double-sided chipbreaker design allows the insert to be rotated or reversed to use the opposite side, extending the number of available cutting positions and improving economic use of each insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of stable cutting-edge performance, the GH110 grade's wear resistance and a precise 0.4 mm nose radius to maintain consistent turning quality and productivity. Order the insert directly via Metav Werkzeuge or consult their technical advisors for application-specific recommendations. TNGG160404 GH110 triangular indexable turning insert by Tungaloy — ISO 160404, 60° The TNGG160404 GH110 is an ISO‑standard triangular indexable insert designed for general external and internal turning applications; it delivers a balanced combination of wear resistance, edge stability and repeatable geometry for productive metal‑cutting operations. Triangular form, ISO 160404 compatible GH110 grade for durable edge life Double‑sided chipbreaker for versatile cutting 0.4 mm nose radius for fine finishing Cylindrical hole and 4.76 mm thickness Consistent edge life for productive turning The insert’s GH110 carbide grade combines controlled hardness with sufficient toughness, offering reliable wear resistance and a stable cutting edge under typical turning conditions. This balance reduces unscheduled tool changes and supports steady cycle times, which benefits batch production and continuous machining operations. The ISO geometry ensures interchangeability with holders conforming to the ISO 160404 system, while the triangular form provides three effective cutting edges per index, enhancing cost efficiency per edge. Where surface finish and repeatability are priorities, the fine 0.4 mm nose radius supports accurate profile generation and predictable toolpath results. Flexible performance through geometry and chip control A double‑sided chipbreaker and the insert’s defined relief angle of 0° allow adaptable chip formation across a range of feeds and depths of cut; selecting the appropriate chipbreaker and grade helps match the insert to the workpiece material and machining strategy. The insert is provided with a cylindrical hole, facilitating secure clamping and correct seat location in compatible clamping sets and underplates. Because holder compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness, pairing the insert with the correct external holder or boring bar is essential for optimal cutting force distribution and vibration suppression. Practical assembly, handling and application guidance With a 4.76 mm plate thickness and standard ISO sizing, the insert fits established toolholder systems used in turning centres and lathes. The triangular shape and double‑sided layout increase usable edges, while the centred hole allows straightforward fastening with replacement screws and clamping sets. For efficient implementation in production, assess fixture stability and select a chipbreaker that complements the chosen feed rates and material behaviour; this approach secures the intended balance between surface quality and tool life. The insert’s carbide construction provides dimensional stability during repeated indexing, supporting consistent tolerances over multiple cycles. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy turning inserts into machining centres and to request cutting data matched to specific applications Technical data Article number: 6808160 Manufacturer SKU: TUN6808160 Brand: Tungaloy Core data ISO designation: 160404 Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance (relief) angle: 0° Hole: with cylindrical hole Special features Triangular form (indexable with 3 edges) Grade: GH110 (Tungaloy) Material: carbide Double‑sided chipbreaker ISO‑standard turning insert for external and internal turning Compatibility determined by shape, clearance angle and tolerance class FAQ What machining operations suit this insert best? This triangular indexable insert is intended for external and internal turning; the TNGG160404 GH110 performs well where a combination of edge stability and consistent wear resistance is required. How many cutting edges are available per insert? The triangular form provides three usable edges; when indexed correctly, the TNGG160404 GH110 yields three fresh cutting corners before replacement is necessary. Which holders fit this insert? Holders compatible with the ISO 160404 geometry and the insert’s 16 mm size will accept the part; correct seating depends on form, relief angle and tolerance class, so select an ISO‑compliant external holder or boring bar. What role does the GH110 grade play in performance? The GH110 carbide grade offers a tailored balance of wear resistance and toughness, supporting longer edge life and repeatable performance in turning operations. Is the insert available with a different chipbreaker? This SKU features a double‑sided chipbreaker; alternative chipbreaker styles or grades are available within the ISO series to match material and cutting parameter needs. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNGG 160404 GH330 Wendeplatten - Tungaloy
Take advantage of the ISO-standard geometry, GH330 carbide grade and secure clamping via the cylindrical hole for consistent turning performance; order the TNGG160404 GH330 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for compatibility advice. TNGG160404 GH330 Tungaloy triangular turning insert — ISO turning insert, 60° geometry The TNGG160404 GH330 Tungaloy insert is an ISO‑standard triangular turning insert intended for external and internal turning, compatible with holders that match its form, relief angle, tolerance class, fastening and size. Carbide grade GH330 for balanced performance ISO‑standard triangular 16 mm size 60° geometry for versatile turning Double‑sided with cylindrical hole for secure clamping Reliable geometry for predictable metal removal The triangular insert offers a 60° cutting angle and an inscribed circle of 16 mm, delivering a stable cutting geometry suited to a wide range of turning tasks. The 0.4 mm corner radius evens out cutting forces and reduces edge chipping in interrupted cuts, while the double‑sided design doubles indexability and extends tool life. ISO standardisation means the insert mates with established holder systems; the compatibility depends on the holder’s form, 0° relief angle, tolerance class, fastening method and the insert thickness of 4.76 mm — factors that ensure correct seat and reproducible cutting results. Material grade and edge stability for consistent machining Equipped with Tungaloy’s GH330 cutting material, the insert balances wear resistance and toughness, which supports both steady high‑volume operations and occasional heavier cuts. The grade complements the insert geometry to preserve the cutting edge and control chip formation; the integrated chipbreaker (double‑sided) helps fragment swarf for reliable evacuation. For engineering teams seeking predictable tool life and fewer regrinds, the combination of grade and geometry reduces unscheduled tool changes and contributes to process stability. Seamless integration into existing tool systems The insert is supplied with a cylindrical hole for positive clamping and is ISO‑designated for easy identification in tool lists and inventory. The combination of carbide substrate, standardised dimensions and the pronounced corner radius simplifies holder selection and reduces setup time. When selecting a holder, ensure form, size, thickness and fastening match the insert specification to guarantee correct seating; doing so preserves the insert’s cutting performance and supports repeatable machining outcomes across batches. For dependable turning with the GH330 grade, contact Metav Werkzeuge for tailored advice and prompt supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808165 Manufacturer SKU: TUN6808165 SKU: 6808165-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts ISO designation: 160404 Insert designation: TNGG160404 Cutting angle: 60° Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle: 16 mm Relief angle: 0° Special features Material: carbide Grade: GH330 (Tungaloy) Shape: triangular Chipbreaker: double‑sided Hole: with cylindrical hole Application: turning (external and internal) ISO‑standard insert compatible with matching holders FAQ What machining tasks is this insert suitable for? The TNGG160404 GH330 Tungaloy insert is designed for external and internal turning operations where ISO‑standard triangular inserts are applicable. How does the GH330 grade affect tool life? GH330 provides a balanced combination of wear resistance and toughness, helping the insert maintain edge stability and deliver dependable tool life under a variety of cutting conditions. Which holders fit this insert? Holders that match the insert’s form, 0° relief angle, tolerance class, fastening method, size and thickness will ensure correct seating and clamping of the TNGG160404 insert. Can the insert be indexed to use both sides? Yes — the double‑sided design allows indexing to the second cutting edge, effectively doubling the usable edges and improving cost‑efficiency. What does the cylindrical hole provide? The cylindrical hole ensures secure clamping and positive location in the seat, reducing the risk of movement under cutting forces. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNGG 160404 GH330 Wendeplatten - Tungaloy
Benefit from the GH330 grade and a precise 0.4 mm corner radius for reliable edge stability and repeatable finishes; the ISO 160404 triangular geometry with 60° cutting angle ensures wide compatibility with standard holders. Order the insert directly via Metav Werkzeuge or request technical advice from the consultants if required. TNGG160404 GH330 TNGG indexable turning insert — Tungaloy TNGG160404 GH330 is an ISO triangular insert designed for general turning applications, offering a balanced carbide grade for wear resistance and edge stability. ISO triangular insert TNGG160404 GH330 60° geometry for versatile external turning 0.4 mm corner radius for improved surface finish Double-sided chipbreaker with cylindrical hole Consistent edge life through balanced grade and substrate The GH330 grade, applied to a robust carbide substrate, provides a deliberate compromise between wear resistance and toughness, resulting in predictable tool life and fewer unplanned tool changes. This balance is particularly valuable in batch production where consistent machining performance reduces downtime. The slightly rounded 0.4 mm corner contributes to a controlled engagement with the workpiece, limiting edge chipping during interrupted cuts and smoothing the transition to finishing passes. Straightforward integration into ISO tool systems for efficient setup Built to ISO dimensions, the triangular 16 mm format and 4.76 mm plate thickness support straightforward mounting in compatible holders and boring bars. Compatibility is determined by insert form, relief angle, tolerance class, fixing method, size and thickness, so the insert integrates easily into existing tool inventories when the matching clamping set and screws are used. The central, cylindrical hole and defined seat geometry ensure secure clamping, which shortens setup time and stabilises cutting conditions for repeatable results. Improved chip control and surface consistency for high productivity The double-sided chipbreaker is optimised for turning operations where reliable chip formation aids uninterrupted machining and consistent surface quality. Combined with the 60° insert geometry, the chip control design supports effective evacuation of chips, reducing the risk of re-cutting and enabling steady cutting forces. The overall result is improved process reliability, with fewer manual interventions and better surface finishes on successive parts—attributes that support higher productivity and reduced scrap rates. Contact Metav Werkzeuge for application guidance on the TNGG160404 GH330 indexable insert from Tungaloy; technical consultation and order support are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6808180 SKU: 6808180-Tungaloy Manufacturer SKU: TUN6808180 Core specifications Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Relief angle: 0° Materials & features Material: carbide Grade: GH330 Shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Application: turning Series: ISO indexable turning inserts Designation: TNGG160404 FAQ What types of turning tasks is this insert designed for? The TNGG160404 GH330 Tungaloy indexable insert is intended for general external and internal turning operations where a balanced combination of wear resistance and edge stability is required. How is compatibility with a toolholder determined? Compatibility depends on insert form, relief angle, tolerance class, fixing method, size and thickness; the TNGG160404 must be matched to a holder with the corresponding ISO seat and clamping arrangement. What advantage does the GH330 grade provide? GH330 offers a balanced mix of wear resistance and toughness, helping to extend effective cutting life and maintain edge stability under varying cutting conditions. Is the insert reversible to use multiple edges? Yes, the triangular shape with a double-sided chipbreaker provides multiple usable cutting edges, allowing the TNGG160404 insert to be indexed for extended economy. What are the identifying numbers for ordering or stock management? Refer to article number 6808180 and SKU 6808180-Tungaloy (Manufacturer SKU TUN6808180) when specifying the TNGG160404 GH330 Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 GH330 Wendeplatten - Tungaloy
Benefit from the combination of GH330 wear resistance, precise 60° triangular geometry and a fine 0.4 mm corner radius for consistent turning quality; order directly via Metav Werkzeuge or consult our specialists for application support. TNGG 160404 GH330 Tungaloy ISO turning insert for turning, 60° triangle, 0.4 mm radius TNGG160404 GH330 Tungaloy — an ISO‑compliant triangular indexable insert designed for external and internal turning, optimised for reliable edge stability and broad material coverage ISO‑compliant triangular insert GH330 Tungaloy grade for wear resistance 0.4 mm corner radius for accurate profiling Double‑sided, cylindrical‑hole design Consistent cutting performance and edge stability The TNGG160404 insert combines a carbide substrate with the GH330 grade to balance wear resistance and toughness for a wide range of turning tasks. Its 60° geometry and triangular form deliver predictable cutting forces and straightforward toolpath planning, while the 0.4 mm radius supports accurate profiling without excessive cutting loads. For shops seeking repeatable results, the ISO conformity reduces setup uncertainty: insert seating and orientation follow standardised dimensions, allowing straightforward integration into established toolholders and boring bars. Economical machining and application flexibility With a double‑sided configuration and a cylindrical locating hole, the insert offers two cutting edges per index, extending usable life and reducing tooling consumption. The GH330 composition is selected to extend tool life across varied steels and non-ferrous materials, improving uptime and lowering overall cost per part. Combined with correctly chosen chipbreaker and stable clamping, this grade supports steady material removal rates and predictable tool-change intervals, which contributes to more efficient cycle planning and reduced shop-floor interruptions. Easy integration and selection guidance for the workshop Compatibility with clamping systems depends on insert form, relief angle, tolerance class, fastening and thickness; the ISO designation simplifies matching to holders. The 0° relief and triangular plate size (16 mm) make it suitable for both external turning and certain internal turning operations when mounted in appropriate holders. Choose the double‑sided chipbreaker and GH330 grade according to workpiece material, required surface finish and machine stability. For complex applications, request machining parameters from Metav Werkzeuge to ensure optimised feeds and speeds and to safeguard tool life. For assured process security with Tungaloy grade GH330 and tailored recommendations, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holders, chipbreaker selection and ordering options Technical Data Article number: 6808174 SKU: 6808174-Tungaloy Manufacturer SKU: TUN6808174 Facts ISO designation: 160404 Insert size: 16 Corner radius: 0.4 mm Thickness: 4.76 mm Geometry angle: 60° Relief angle: 0° Application: Turning Special features Material: carbide Grade: GH330 (Tungaloy) Plate shape: triangular Hole: with hole Hole style: cylindrical hole Chipbreaker: double‑sided Model series: ISO turning indexable inserts FAQ What materials is the TNGG160404 GH330 suited for? The TNGG160404 GH330 Tungaloy turning insert (SKU 6808174-Tungaloy) is engineered for a broad material range thanks to the GH330 grade, offering a balanced combination of wear resistance and toughness suitable for many steels and selected non‑ferrous alloys. How does the double‑sided design affect tool life? The double‑sided construction of the TNGG160404 GH330 Tungaloy plate allows two usable edges per index, effectively doubling the number of cutting positions compared with single‑sided inserts and improving cost efficiency per edge change. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening, size and thickness; the ISO‑compliant TNGG160404 GH330 Tungaloy insert fits standard triangular holders and appropriate boring bars built for 16 size, 4.76 mm thickness and 60° geometry. Can the 0.4 mm corner radius achieve fine surface finishes? Yes. The 0.4 mm corner radius on the TNGG160404 GH330 Tungaloy insert supports accurate profiling and improved surface finish in many turning operations while maintaining adequate edge strength for moderate depth cuts. Is the GH330 grade suitable for interrupted cuts? GH330 is formulated to balance toughness and wear resistance; the TNGG160404 GH330 Tungaloy insert provides enhanced edge stability that can perform well under certain interrupted‑cut conditions when combined with appropriate cutting parameters and stable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a wear-balanced GH330 carbide grade and a compact 0.4 mm corner radius for consistent turning results. The triangular, double-sided design ensures economical index changes and steady chip formation; order directly via Metav Werkzeuge or consult our specialists for application support. TNGG160404 GH330 — ISO triangular turning insert for turning, Tungaloy The TNGG160404 GH330 is a triangular ISO indexable insert designed for external and internal turning; compatibility with holders is defined by form, relief angle, tolerance class, clamping and size. ISO triangular insert TNGG160404 GH330 Double-sided chipbreaker for consistent chips 0.4 mm corner radius for versatile turning Cylindrical hole for secure clamping 4.76 mm thickness for enhanced stability High-performance grade for reliable productivity The insert is manufactured in carbide and specified in the GH330 grade, which balances wear resistance and toughness to preserve edge stability during interrupted cuts and continuous production runs. This balance reduces tool changes and contributes to predictable tool life, which in turn increases machine uptime and lowers per-part costs. The double-sided chipbreaker supports repeatable chip formation, improving swarf handling and reducing cycle variability in serial turning operations. Geometry and clamping that stabilise the cut A triangular plate with a 60° included angle and a 0.4 mm corner radius gives a good compromise between strength and surface finish for medium to fine turning tasks. The insert thickness of 4.76 mm and the cylindrical hole provide secure mounting and rigidity when paired with an appropriate external holder or boring bar. The 0° relief angle is typical for this type series and must be matched to the holder geometry to ensure correct rake and clearance; compatibility depends on form, tolerance class, fastening method and plate size. System integration and practical application advice Designed for ISO-compliant tool systems, the insert integrates into a setup consisting of an ISO insert, a suitable external holder or boring bar, a shim or clamping set and replacement screws. The double-sided chipbreaker allows economical index changes without sacrificing chip control, and the GH330 grade complements the geometry with improved edge wear behaviour. For operations requiring consistent dimensional accuracy and simple tool handling, this indexable insert supports straightforward process implementation. If specific material applications or cutting data are required, technical consultation ensures the selection of the optimal chipbreaker and cutting parameters. For tailored advice on using the TNGG160404 GH330 insert and to coordinate order details with Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide application-focused support. Technical data Article number: 6808190 Manufacturer SKU: TUN6808190 SKU: 6808190-Tungaloy Model series: ISO indexable turning inserts Description: TNGG160404 GH330 Tungaloy indexable insert Facts Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Manufacturer article number: 6808190 Special features Carbide grade GH330 Double-sided chipbreaker Triangular plate form Cylindrical hole for mounting ISO designation TNGG160404 For external and internal turning Compatibility determined by form, relief angle, tolerance class, clamping and size FAQ What machining tasks is this insert suitable for? The TNGG160404 GH330 indexable insert is intended for external and internal turning tasks where a balance of wear resistance and toughness is required. How does the 0.4 mm corner radius affect the result? A 0.4 mm corner radius improves edge strength for medium turning while still allowing acceptable surface finish; the TNGG160404 GH330 is suited for applications that require both stability and decent finish. Is the insert reversible to reduce tooling costs? Yes, the double-sided chipbreaker means the insert can be indexed to a fresh cutting edge, extending usable life and improving cost efficiency for the TNGG160404 GH330 insert. What is needed to fit the insert to a machine? Mounting requires a compatible ISO external holder or boring bar, a shim or clamping set and replacement screws; ensure holder geometry matches the insert form and relief angle. What are the advantages of the GH330 grade? The GH330 carbide grade used in this insert delivers a robust balance of wear resistance and toughness, giving stable cutting edges and reliable performance under varied turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of coated cermet GT9530 performance, a 60° triangular geometry and a 0.4 mm corner radius for dependable surface finish and extended tool life; order via Metav Werkzeuge or contact our advisors for application support. TNGG 160404 GT9530 turning insert — Coated cermet, 60° triangular — Tungaloy The TNGG160404 GT9530 is an ISO-standard triangular turning insert designed for finishing and light general turning of steel under stable machining conditions Coated cermet grade GT9530 ISO triangular 16 mm insert Double-sided chipbreaker design Cylindrical-hole fixing, 0° relief angle Improved surface finish with consistent wear resistance The GT9530 grade is a coated cermet developed for wear-resistant finishing and light universal turning. Its chemistry and coating deliver a stable cutting edge that helps to achieve a fine surface quality on steel where vibration is limited and rigidity is high. The 60° triangular geometry, combined with a 0.4 mm corner radius, supports accurate profile definition while the double-sided chipbreaker maintains predictable chip formation. These attributes result in fewer reworks and a more efficient machining cycle that favours throughput and lower overall machining costs. Reliable holder compatibility and simple tooling integration This insert conforms to ISO norms for indexable turning plates, so compatibility with suitable external holders, boring bars and clamping sets is determined by form, relief angle, tolerance class, fixing method, size and thickness. The cylindrical hole mounting ensures a secure clamping interface and straightforward insert changeover. Specifying the correct holder and tightening torque ensures repeatable seat seating and best surface results; pairing the insert with a matched holder reduces micro-movement and secures cutting stability during external and internal turning operations. GT9530 advantages: productivity and predictable tool life The coated cermet composition provides improved wear behaviour compared with conventional finishing grades, extending the effective tool life when cutting under recommended conditions. The grade is optimised for stable cutting and produces consistent results across batches, which supports planning in series production. Because the insert is double-sided, economics are enhanced by the ability to rotate and re-use the second cutting edge, improving cost-efficiency per index. The ISO-standard shape also simplifies inventory management across different machines. Practical guidance for application and handling For optimal results with this triangular insert, select cutting parameters that prioritise rigidity and steady feed rates; sudden load variations can affect edge life on cermet grades. The 4.76 mm plate thickness and 16 mm inscribed circle provide mechanical robustness in moderate-depth cuts, while the 0° relief angle suits many finishing passes. Store inserts in their original packaging to prevent edge damage and inspect clamping seats for cleanliness before use. Trial cuts under representative conditions are recommended to establish the best speed and feed window for the specific steel grade being machined. For enquiries about availability or application of the Tungaloy GT9530 TNGG160404 insert, contact Metav Werkzeuge for tailored advice and ordering — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6997777 Manufacturer SKU: TUN6997777 Model series: ISO turning inserts Facts Geometry / ISO code: 160404 Inscribed circle: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included hole: with hole (cylindrical) Angle: 60° Special features Coated cermet grade GT9530 ISO-standard triangular insert (TNGG) Double-sided chipbreaker Suitable for external and internal turning Fixing by cylindrical-hole clamping Manufacturer: Tungaloy Manufacturer article number: 6997777 Cutting material type: coated cermet FAQ What materials is this insert suited for? The TNGG160404 GT9530 insert is specified for finishing to light universal turning of steel and performs best under stable cutting conditions where a fine surface finish is required. How is the insert clamped in the holder? Clamping is via a cylindrical hole; the TNGG160404 GT9530 uses a central hole for secure seating and straightforward tightening in compatible ISO holders. Can both sides of the insert be used? Yes, the insert features a double-sided chipbreaker, allowing both cutting edges to be indexed for extended service life and improved cost per edge. What are the key dimensions to consider when selecting a holder? Important dimensions are the inscribed circle (16 mm), plate thickness (4.76 mm) and the ISO code 160404, which together determine form fit, tolerance class and compatible clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of coated cermet GT9530 and an ISO triangular geometry for reliable finishing and extended tool life; the 0.4 mm corner radius and double-sided chipbreaker deliver improved surface quality and stable performance. Order the insert directly via Metav Werkzeuge or consult our technical team for holder compatibility and process optimisation. TNGG160404 GT9530 Tungaloy turning insert (ISO triangular, 60°) The TNGG160404 GT9530 is an ISO-standard triangular turning insert intended for finishing to light general turning; designed to provide wear resistance and consistent surface results under stable cutting conditions. Coated cermet grade GT9530 for wear resistance ISO triangular insert, 60° cutting geometry 0.4 mm corner radius for fine surface finish Compatible with ISO external holders, with cylindrical hole Proven finishing and extended tool life The coated cermet grade provides a balance between hardness and toughness that is especially effective for finishing operations. The GT9530 composition is engineered to reduce flank wear under steady cutting conditions, which translates into longer intervals between indexings and lower tool-change overhead. With a 0.4 mm corner radius, the insert supports a fine surface finish without compromising the edge strength required for light to medium feeds. Fewer interruptions in production and more consistent part geometry are practical outcomes of this combination. Seamless integration with ISO holders and secure clamping The triangular ISO geometry and the 60° cutting angle ensure broad compatibility with standard external holders and boring bars. Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters avoids misfits and instability. The insert’s cylindrical hole supports positive locating and repeatable clamping, so set-up time is reduced and process repeatability improves. Where short changeover times matter, the standardised form makes it straightforward to replace worn inserts without modifying the clamping system. Process stability and material suitability for steel turning This grade is aimed principally at turning steel in finishing to light universal operations when a good surface and longer life are required. The combination of a coated cermet cutting surface and a carbide substrate gives a controlled wear pattern and reliable edge retention where cutting conditions are stable. The double-sided chipbreaker contributes to predictable chip formation and evacuation, which supports consistent tool life and part quality. For applications that demand repeatable finishes and predictable tool performance, this insert is a suitable choice. Practical recommendations for selection and use Select the double-sided chipbreaker and the GT9530 grade when process stability and surface quality are priorities; for less stable setups or interrupted cuts consider alternative geometries or mounting strategies. The insert’s 16 mm size and 4.76 mm thickness provide a robust contact area that benefits rigidity in the tool assembly. If there is any uncertainty about holder choice, tolerance class or best feed/speed window, Metav Werkzeuge’s technical consultants are available to advise on matching the insert to the machine and workpiece material; practical guidance helps avoid premature wear and improves overall productivity. Contact Metav Werkzeuge for tailor-made advice on Tungaloy inserts and holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss process optimisation and ordering. Technical data Article number: 6997778 Manufacturer SKU: TUN6997778 SKU: 6997778-Tungaloy Model series: ISO turning indexable inserts ISO designation: TNGG160404 Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 60° Hole: with cylindrical hole Grade: GT9530 Cutting material: coated cermet Application: Turning Special features Double-sided chipbreaker Coated cermet grade GT9530 Carbide substrate ISO-compatible triangular geometry FAQ Which materials can be machined with this insert? The insert is optimised for steel in finishing to light universal turning; the GT9530 grade prioritises wear resistance and surface quality under stable conditions. What benefit does the 0.4 mm corner radius provide? A 0.4 mm corner radius improves edge strength for fine finishes and helps achieve consistent surface quality while maintaining adequate resistance to edge chipping. How is holder compatibility determined for this insert? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and process stability with ISO holders. Is the insert indexable and how many cutting edges are available? The triangular ISO shape is indexable and the insert is double-sided, offering multiple usable edges before replacement is required. What cutting conditions suit the GT9530 grade best? The GT9530 coated cermet is designed for stable cutting conditions where a good surface finish and longer tool life are desired; select feeds and speeds to maintain a steady, uninterrupted cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 NS520 Wendeplatten - Tungaloy
Benefit from the combination of precise surface finish, stable wear resistance and full ISO compatibility for reliable turning operations. Order the TNGG160404 NS520 Tungaloy insert directly via Metav Werkzeuge or ask the consultants if required. TNGG160404 NS520 triangular turning insert with 0° relief, Tungaloy TNGG160404 NS520 is an ISO-format turning insert designed for finishing to light turning of steel components, optimised for surface quality and dimensional accuracy. NS520 cermet for finishing Triangular insert with cylindrical hole 0° relief for stable cutting Double-sided chipbreaker for even wear Improved surface finish and dimensional control for finishing operations The insert is made from cermet (NS520) bonded on a carbide substrate, a combination that prioritises a fine-grain edge and consistent wear behaviour. This results in significantly improved surface finish and tighter dimensional accuracy during finishing to light turning tasks. The small 0.4 mm corner radius helps maintain high-quality part edges while reducing the risk of chatter at modest feeds; for less experienced users, this means fewer scrap parts and more predictable production outcomes. The ISO geometry ensures that form, relief angle and tolerance classes align with standard holders, simplifying machine setup. Reliable chip control and repeatable tool life for productivity Equipped with a double-sided chipbreaker and a cylindrical hole for secure clamping, the insert supports stable chip formation and repeatable seating in the tool holder. The 0° relief specification delivers a consistent cutting engagement that favours low-vibration finishing cuts on steel, while the 4.76 mm plate thickness contributes to edge stability under moderate cutting forces. Together, these features increase process reliability and reduce tool-change frequency, which directly benefits throughput and lowers unit production time. Compatibility and handling that simplify workshop routines The insert follows the ISO turning insert family conventions, so compatibility with outer holders is determined by geometry, clearance, tolerance class, fixing and thickness rather than by special adapters. The triangular plate shape and 60° included angle permit multiple effective cutting edges per insert, aiding cost efficiency in serial operations. For straightforward integration, select the matching holder and clamping set; the insert’s design minimises alignment errors and eases indexable changeover during scheduled maintenance intervals. Contact Metav Werkzeuge for Tungaloy inserts and secure NS520 finishing performance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6808182 Manufacturer SKU: TUN6808182 SKU: 6808182-Tungaloy ISO designation: TNGG160404 Label: TNGG160404 NS520 Tungaloy-Wendeplatte Facts Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief (free) angle: 0° Hole: with hole (cylindrical) Special features Material: carbide Grade/coating: NS520 cermet Plate shape: triangular Chipbreaker: double-sided Intended application: turning (finishing to light machining of steel) Compatibility: ISO-format insert — holder compatibility by form and tolerance FAQ What materials is this insert suitable for? The NS520-grade insert is designed primarily for machining steel and is optimised for finishing to light turning operations where surface quality and dimensional consistency are critical. How does the NS520 grade affect productivity? NS520’s cermet formulation supports stable wear and fine cutting edges, which enhances surface finish and extends effective tool life in finishing applications, reducing rework and increasing productivity. Is the TNGG160404 compatible with standard ISO holders? Yes. The TNGG160404 is an ISO-format indexable insert; holder compatibility depends on matching the insert form, relief angle, tolerance class, fixing and thickness. Can the insert be used on both internal and external turning? The insert is suitable for both internal and external turning operations, provided the correct holder and mounting arrangement are used for the intended machining setup. How is chip control managed with this insert? Chip control is achieved via the double-sided chipbreaker geometry, which promotes consistent chip formation and even wear across the cutting edges. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of precise NS520 cermet grading, ISO‑standard geometry and robust carbide construction for consistent finishing results and reliable tool life; order directly via Metav Werkzeuge or request specialist advice from the consultants. TNGG 160404 NS520 Tungaloy – ISO turning insert for finishing applications, triangular 60° geometry The TNGG160404 NS520 Tungaloy is an ISO‑standard triangular insert designed for external and internal turning, focused on finishing and light machining of steel where surface quality and dimensional accuracy are priorities. ISO triangular insert, 60° geometry Cermet grade NS520 for fine finishing Double-sided chipbreaker, cylindrical hole 0.4 mm corner radius, 4.76 mm plate thickness Consistent finishing with a cermet grade optimised for surface quality The cermet composition used in this grade combines high hardness and thermal stability to deliver a fine surface finish and limited crater wear during finishing passes. Designed as a cermet or coated cermet insert, the grade NS520 emphasises dimensional accuracy and uniform wear, which reduces the need for frequent rework and supports predictable part tolerances. For shops prioritising repeatable finishes on steels, the material choice and cutting edge geometry translate into measurable improvements in process stability. Secure clamping and repeatable geometry for reliable process control The triangular shape with a 60° included angle provides versatile seating in standard holders, while the cylindrical hole and one‑piece indexable design ensure stable clamping and straightforward indexing. With a 0° relief angle, a 0.4 mm corner radius and a plate thickness of 4.76 mm, the insert supports controlled engagement and consistent tool overhang limits. Compatibility with a given holder will depend on form, relief angle, tolerance class, clamping arrangement, size and thickness; attention to these parameters ensures repeatable set‑ups and consistent cycle‑time results. Practical advantages in workshop operation and system integration The double‑sided chipbreaker reduces tool cost per edge by offering two usable cutting faces and promotes predictable chip formation for light to finishing cuts. Typical use is in external and internal turning where high surface quality and steady wear behaviour are required. The complete system comprises the insert together with a matching external holder or boring bar, a seat/clamping set and replacement screws, permitting rapid reconditioning of assemblies. If uncertain whether this insert matches specific tooling or process parameters, Metav Werkzeuge provides technical guidance by email or telephone to align grade and chipbreaker selection with the component material and machining strategy. Contact Metav Werkzeuge for tailored cutting data, holder compatibility checks and supply of TNGG 160404 NS520 inserts; specialist advice and fast, application‑oriented support from Metav Werkzeuge is available. Technical data Article number: 6808161 Manufacturer SKU: TUN6808161 SKU: 6808161-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: TNGG160404 Grade: NS520 Numbers Geometry angle: 60° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 16 mm Relief angle: 0° Edges per insert: double‑sided Special features Material: carbide Grade/coating: NS520 (cermet / coated cermet) Shape: triangular insert Hole style: cylindrical hole Chipbreaker: double‑sided Application: external and internal turning (finishing to light machining) System components: insert, external holder or boring bar, seat/clamping set, spare screws Compatibility factors: form, relief angle, tolerance class, clamping, size, thickness FAQ What materials is this insert suited for? The TNGG160404 NS520 insert is specified for finishing and light machining of steel, with the NS520 cermet grade focusing on surface quality and dimensional stability. How is the insert clamped and indexed? Clamping relies on the cylindrical hole and the seat geometry of the chosen holder; the triangular 60° format and double‑sided chipbreaker permit safe indexing to the second cutting edge when required. Which cutting tasks benefit most from this grade and geometry? The combination of cermet NS520 and a fine corner radius is best for finishing passes where consistent surface finish and tight tolerances are important. What should be checked for holder compatibility? Ensure the holder matches the insert form, relief angle (0°), tolerance class, clamping method, size (16 mm) and thickness (4.76 mm) to guarantee correct seating and repeatable results. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNGG 160404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precision finishing, low cutting forces and ISO compatibility to ensure consistent surface quality in serial and single-part turning operations; order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific recommendations. TNGG160404 NS9530 triangular ISO turning insert for finishing (Tungaloy) The TNGG160404 NS9530 is an ISO-standard triangular turning insert engineered for fine finishing of steel in continuous-cut operations. ISO triangular insert, 60° cutting geometry Uncoated cermet grade NS9530 for high surface finish Low cutting forces for continuous finishing cuts Cylindrical hole and 0.4 mm corner radius Consistent fine finishing with an uncoated cermet grade The insert is specified as an uncoated cermet in grade NS9530, developed for finishing of steel where a sharp cutting edge and low cutting forces are required. Cermet combines ceramic and metallic phases to provide a stable edge that resists built-up edge formation; this results in a high surface finish and predictable performance on continuous cuts and small depths of cut. The use of a finishing-grade substrate reduces friction at the cutting zone and supports repeatable part tolerances on turned components. Designed for reliable holder compatibility and secure clamping As an ISO turning insert, compatibility with the toolholder is governed by the insert form, relief angle 0°, tolerance class, fastening method, size and thickness. The triangular geometry with an included angle of 60°, a cylindrical hole and double-sided chipbreaker ensure the insert seats and clamps securely in standard external holders or boring bars. The system typically comprises the ISO insert, a matching outer holder or boring bar, a locating shim/clamping set and replacement screws; correct matching prevents movement, improves repeatability and simplifies index changes during production. Small corner radius for fine detail and low cutting force demands The corner radius 0.4 mm balances surface finish and edge strength for finishing passes: a smaller radius lowers required feed forces and produces finer surface textures, while still offering adequate edge stability for continuous feeds. The 0° relief angle yields a neutral cutting geometry that is well suited to delicate finishing cuts on steel. For machinists this means more consistent part appearance and fewer secondary processes; for production planners it translates into reduced cycle-time variability and improved first-pass yield when the right grade and chipbreaker are selected. Operational advantages and application focus Specified for turning operations, this ISO insert targets customers requiring excellent surface quality on steel components with small depths of cut and continuous cutting conditions. The double-sided chipbreaker offers two usable cutting edges per seat, extending effective edge life and improving cost-efficiency. Where higher process stability and predictable edge behaviour are priorities, the combination of the NS9530 cermet grade and the triangular ISO format supports smooth chip formation and reduced vibration during finishing, which is particularly beneficial for serial production and precision parts. For precision finishing with Tungaloy’s NS9530 grade, contact Metav Werkzeuge for tailored advice or to place an order; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997846 Manufacturer article number: 6997846 Manufacturer SKU: TUN6997846 Distributor SKU: 6997846-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Dimensions & core data ISO designation: 160404 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Hole: with hole (cylindrical) Design & special features Shape: triangular Grade/coating: NS9530, uncoated cermet Material: carbide Chipbreaker: double-sided Application: turning Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The TNGG160404 NS9530 insert from Tungaloy is intended primarily for finishing of steel; the NS9530 cermet grade is optimised for low cutting forces and high surface finish on continuous cuts. How does the 0° relief angle affect performance? A 0° relief angle gives a neutral cutting geometry that stabilises the edge in finishing passes, reducing cutting forces and supporting fine surface results when using the TNGG160404 insert. Can the insert be used in standard ISO external holders? Yes; the ISO designation and triangular form ensure compatibility with matching external holders and boring bars when the holder matches the insert’s form, size, thickness and clamping method. How many usable edges does the insert offer? The insert features a double-sided chipbreaker, providing multiple indexed cutting edges to extend service life before replacement. What role does the corner radius play for surface finish? The 0.4 mm corner radius balances edge strength and surface quality: it reduces feed forces for finer finishes while maintaining sufficient edge robustness for continuous finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting edge, low cutting forces and ISO compatibility to improve finishing productivity in steel turning; order directly via Metav Werkzeuge or consult our team for application advice. TNGG 160404 NS9530 Tungaloy indexable turning insert for finishing steel (turning) TNGG 160404 NS9530 is an ISO-standard triangular indexable insert designed for finishing operations on steel, offering a sharp cermet edge and low cutting forces for continuous cuts. Finishing cermet grade NS9530 0.4 mm corner radius for fine edges Triangular ISO form, 60° cutting angle Cylindrical hole with double-sided chipbreaker High-quality finishing for steel turning The NS9530 grade is an uncoated cermet developed for fine finishing of steel components. Its formulation provides a sharp cutting edge and reduced built-up edge tendency, which directly contributes to a higher surface finish on turned parts. For continuous cutting and small depths of cut the combination of a sharp cermet substrate and a small corner radius reduces cutting forces and vibration, helping to maintain dimensional accuracy on long runs. The insert’s performance is particularly evident where consistent surface quality and tight tolerances are essential. Design and compatibility that simplify tool selection The insert follows the ISO designation TNGG160404, with a triangular plate form and a 60° included angle. Key design elements — plate size 16 mm, thickness 4.76 mm, 0.4 mm corner radius and a cylindrical hole — determine compatibility with ISO holders; matching is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The double-sided chipbreaker allows economical use of both edges and supports predictable chip control under finishing conditions. These standardised dimensions make the insert straightforward to integrate into established tooling systems on lathes and turning centres. Practical benefits in daily machining and handling Using this grade and geometry yields tangible productivity benefits: lower cutting forces mean less load on the toolholder and machine spindle, and the sharp edge reduces the need for secondary finishing operations. The insert’s 0° clearance angle and cermet substrate suit continuous feeds and precise finishing passes, reducing cycle times while delivering reproducible surface quality. Replacement and indexing are economical thanks to the two usable sides, and the ISO conformity of the plate simplifies inventory management and reordering for production environments. Contact Metav Werkzeuge for technical guidance on Tungaloy NS9530 finishing inserts and availability; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997847-Tungaloy Manufacturer SKU: TUN6997847 Manufacturer item number: 6997847 Designation: TNGG160404 NS9530 Tungaloy insert Facts Corner radius: 0.4 mm Included angle: 60° Plate thickness: 4.76 mm Plate size: 16 mm Clearance angle: 0° Hole: with hole, cylindrical hole Special features ISO turning insert series Uncoated cermet grade NS9530 Triangular plate form Double-sided chipbreaker Designed for finishing steel, continuous cuts and small depths of cut Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? This insert is specified for finishing steel applications; the NS9530 cermet grade is optimised for continuous cuts and small depths of cut on steel. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius provides a fine cutting edge for improved surface finish while keeping cutting forces low during finishing passes. Is the insert compatible with standard ISO holders? Compatibility depends on the holder’s form, clearance, tolerance class, fastening method, size and thickness; the ISO designation TNGG160404 simplifies matching with standard ISO toolholders. Can both sides of the insert be used? Yes, the insert features a double-sided chipbreaker, enabling economical use of both cutting edges before replacement. What is the manufacturer SKU and article number for ordering? The insert is listed under SKU 6997847-Tungaloy and manufacturer SKU TUN6997847 for reference in procurement and ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 NS9530 Wendeplatten - Tungaloy
Take advantage of uncoated cermet NS9530 for superior finishing quality and ISO 160404 compatibility to simplify holder selection; the double-sided triangular design with a 0.4 mm corner radius reduces tooling costs through multiple indexations. Order directly via Metav Werkzeuge or consult their advisors for application-specific recommendations. TNGG 160404 NS9530 Tungaloy indexable insert for turning — uncoated cermet finishing, 60° geometry The TNGG160404 NS9530 is a triangular ISO-format indexable insert designed for turning operations, especially finishing of steel with continuous cuts and fine surface requirements. ISO 160404 triangular insert, 60° geometry Uncoated cermet NS9530 for finishing cuts 0.4 mm corner radius for fine surface finish Double-sided chipbreaker with cylindrical hole for secure clamping Precision finishing for demanding steel turning The uncoated cermet NS9530 is developed as a finishing grade that prioritises a sharp cutting edge and low cutting forces, which together help achieve an improved surface quality on steel components. The combination of the cermet cutting material and a small 0.4 mm corner radius is well suited to continuous cuts and small depths of cut, ensuring consistent results when tight tolerances and surface integrity matter. The composition and geometry reduce built-up edge and support longer intervals between inspections, translating into a more efficient production flow. Secure ISO compatibility and stable clamping Engineered to the ISO 160404 format, the insert‘s 60° geometry and triangular shape provide predictable seating in standard turning holders. The cylindrical hole and double-sided construction enable secure fastening and two usable faces before re-indexing, which lowers per-edge cost. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; this insert’s dimensions and hole style make it straightforward to match with common ISO external holders or boring bars, reducing setup time and ensuring repeatable positioning for each change. Application-focused efficiency and process reliability As a finishing-grade insert intended primarily for steel turning, the design emphasises low cutting forces and high surface quality rather than aggressive material removal. The double-sided chipbreaker improves chip control during continuous cutting conditions, while the uncoated cermet substrate preserves a sharp cutting edge for fine machining. For manufacturers seeking productivity and predictable results in series production, this insert offers a balance of economical indexation and high-quality finish, backed by the reputation of its manufacturer for consistent tool performance. Choose the NS9530 finishing insert from Tungaloy for improved surface quality and predictable tool life—contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997852 SKU: 6997852-Tungaloy Manufacturer SKU: TUN6997852 Model series: ISO indexable turning inserts Type designation: TNGG160404 Core specifications Geometry angle: 60° Corner radius: 0.4 mm Clearance angle: 0° Thickness: 4.76 mm Inscribed circle / size: 16 mm ISO code: 160404 Features and materials Cutting material: uncoated cermet NS9530 Body material: carbide substrate Insert shape: triangular Chipbreaker: double-sided Hole style: cylindrical hole Application: turning; finishing of steel Compatibility: ISO-format holders (by form, clearance, tolerance, fastening, size and thickness) FAQ What kinds of steel are best machined with this insert? The TNGG160404 NS9530 insert is a finishing grade optimised for a wide range of steels; its uncoated cermet composition helps produce high surface quality in continuous cutting conditions. How is the insert secured in the holder? The insert features a cylindrical hole and ISO 160404 seating; the hole style and standardised geometry enable secure clamping in compatible external holders or boring bars. Is this insert suitable for roughing operations? No, the NS9530 grade is a finishing sort designed for low cutting forces and fine surfaces; heavy roughing or interrupted cuts are not its primary application. How many times can the insert be indexed? As a double-sided triangular insert, the component provides multiple index positions before replacement, allowing economical use of the cutting edges and reduced tooling costs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and the sharp uncoated cermet edge to achieve consistently high surface quality and low cutting forces in finish turning operations; the triangular 60° geometry with a 0.4 mm corner radius ensures predictable corner formation. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice and holder compatibility. TNGG 160404 NS9530 Tungaloy indexable insert for turning, triangular 60° A TNGG160404 NS9530 indexable insert engineered for finish turning of steel, offering a sharp cutting edge and a double-sided chipbreaker for continuous-cut applications. Finishing grade NS9530 for superior surface Uncoated cermet with sharp cutting edge 60° triangular shape, 0.4 mm corner radius Double-sided chipbreaker, cylindrical hole Achieve superior surface finish with a finishing-grade insert The combination of the NS9530 finishing grade and an uncoated cermet cutting edge reduces built-up edge and keeps cutting forces low, making this insert particularly well suited to finish turning of steel. The sharp edge geometry promotes a fine chip separation and minimises vibration during light cuts, which directly translates into a high surface finish and reduced rework. For operations that require consistent part appearance and tight dimensional tolerances, this geometry supports stable, reproducible results. Reliable fit and system compatibility for predictable machining Designed to match ISO specifications, the insert’s triangular 60° form and cylindrical hole allow secure mounting in standard turn-holders; compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness. The 0° clearance relief and the standardised TNGG160404 format simplify holder selection and changeover in mixed-machine environments, reducing downtime. Where precision and interchangeability are priorities, the ISO-conforming design ensures the insert integrates smoothly into the tooling system. Productivity and tool-life considerations for finishing applications The double-sided chipbreaker offers two usable edges, improving economy while maintaining the required edge condition for finishing cuts. With a corner radius 0.4 mm and moderate insert thickness 4.76 mm, the geometry supports steady chip flow in continuous cuts and small depths of cut, balancing edge strength and the need for fine surface integrity. The materials and design of this insert favour stable chip formation and repeatable performance, so fewer tool changes are required over a production run, aiding overall process efficiency. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy NS9530 finishing insert into production and for holder recommendations tailored to the machining task at hand Technical data Article number: 6997838 Manufacturer SKU: TUN6997838 Our SKU: 6997838-Tungaloy Model series: ISO indexable turning inserts Facts Insert designation: TNGG160404 NS9530 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Special features Cutting material: uncoated cermet Grade: NS9530 (finish) Chipbreaker: double-sided Hole: with cylindrical hole Relief angle: 0° clearance Shape: triangular Typical application: turning System components: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ Is this insert suitable for finish turning steel components? Yes. The TNGG160404 NS9530 insert is a finishing grade designed specifically for steel, providing a sharp edge and low cutting forces that promote a high surface finish. How many usable cutting edges are available per insert? The insert features a double-sided chipbreaker, giving two usable edges per indexable face and supporting economical tool use in finishing operations. What should be considered when selecting a holder for this insert? Holder compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; choose a holder that accepts triangular 60° ISO inserts with a cylindrical hole and 4.76 mm plate thickness. Can this insert be used for interrupted cuts or only continuous finishing? This grade and geometry are optimised for continuous cuts and small depths of cut; for heavy interruption, consider grades and geometries designed for tougher shock resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 NS9530 Wendeplatten - Tungaloy
Benefit from precision finishing and stable chip control thanks to the uncoated cermet NS9530 and the insert's sharp cutting edge; the combination reduces cutting forces and improves surface quality. Choose this ISO-format triangular insert for consistent finishing in turning operations. Order the TNGG 160404 NS9530 insert directly via (Metav Werkzeuge) or ask our consultants if needed. TNGG 160404 NS9530 Tungaloy indexable insert for Turning — finishing cermet, 60° A TNGG 160404 NS9530 indexable turning insert designed for finishing steel, featuring a sharp cutting edge, double-sided chipbreaker and a 60° triangular geometry. ISO-standard triangular insert design Cermet NS9530 for fine surface finish Low cutting forces with sharp edge Double-sided chipbreaker, cylindrical hole Outstanding finishing on steel components The uncoated cermet grade NS9530 is optimised for finishing applications on steel, delivering a sharp cutting edge and low cutting forces that translate into improved surface quality and reduced rework. Cermet combines ceramic hardness with metallic toughness, which helps maintain edge acuity during continuous cutting and small depth passes. The result is a reliable, repeatable finish with fewer tool changes and more consistent part appearance, particularly where surface integrity is critical. Simple integration into ISO turning systems The triangular ISO geometry with a 60° included angle and a cylindrical hole ensures straightforward indexable insert replacement and secure clamping in compatible holders. Key physical dimensions — 16 mm size, 4.76 mm thickness and a 0.4 mm corner radius — provide predictable seating and repeatability when the toolholder matches the insert form, clearance angle and tolerance class. Clear compatibility criteria reduce setup time and make the insert easy to adopt within existing turning tool systems. Process reliability for continuous, light cutting Designed as a finishing grade for continuous cuts and small depths of cut, this insert features a double-sided chipbreaker that promotes stable chip formation and consistent cutting forces. The combination of cermet cutting material and the insert’s geometry supports high-quality surface results while lowering the likelihood of built-up edge in steady-state turning. For workshops seeking dependable finishing performance on steel, the insert offers a predictable tool life and quality output under the recommended conditions. Contact Metav Werkzeuge today to discuss purchasing the TNGG 160404 NS9530 indexable insert or to request personalised advice on holder compatibility and application parameters; Metav Werkzeuge can advise on tooling selection and supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997839 Manufacturer article number: 6997839 Manufacturer SKU: TUN6997839 SKU: 6997839-Tungaloy Model series: ISO turning indexable inserts Core specifications Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief (clearance) angle: 0° Features & applications Uncoated cermet grade NS9530 Double-sided chipbreaker With cylindrical hole Triangular plate form For turning — finishing on steel ISO-standardised design Compatibility determined by holder form, clearance angle, tolerance class, attachment, size and thickness FAQ Which materials is this insert best suited for? The TNGG 160404 NS9530 insert is specified for finishing on steel; the cermet grade NS9530 is tuned to produce fine surface finishes and low cutting forces in continuous turning operations. Can this insert be used for roughing or heavy cuts? This indexable insert is a finishing grade designed for continuous cuts and small depths of cut; it is not optimised for heavy roughing where different chip formers and grades are required. How is holder compatibility determined for the insert? Compatibility depends on the holder matching the insert’s form, relief angle, tolerance class, attachment method, size and thickness; check that the toolholder accepts triangular ISO inserts with a 60° geometry and a cylindrical hole. Is the insert reversible or single-use per side? The insert features a double-sided chipbreaker, allowing the use of multiple cutting edges by indexing the plate as intended by the ISO triangular format. What are the key dimensional values to check before ordering? Check the 16 mm plate size, 4.76 mm thickness and 0.4 mm corner radius, as well as the 60° included angle to ensure proper seating and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the item is specified as made from carbide while its cutting grade is listed as an uncoated cermet; please verify and correct the conflicting material information to ensure accuracy in the database, as such discrepancies can lead to errors in manufacturing processes, material selection, and quality control, potentially causing delays, increased costs, or compromised product performance, which highlights the importance of resolving this issue promptly by cross-checking the specifications, consulting relevant documentation, and confirming the correct material classification to maintain consistency and reliability in the system while avoiding any potential misunderstandings or operational inefficiencies that may arise from such conflicts.
TNGG 160404 NS9530 Wendeplatten - Tungaloy
Benefit from the NS9530 uncoated cermet grade and a sharp cutting edge for low cutting forces and superior surface finish; the ISO‑standard triangular geometry ensures reliable fitment in compatible holders and steady machining results. Order the TNGG160404 NS9530 Tungaloy insert directly via Metav Werkzeuge or consult our advisors for application support. TNGG160404 NS9530 Tungaloy turning insert – uncoated cermet, 60° triangular geometry The TNGG160404 NS9530 is an ISO‑standard triangular turning insert for finishing operations on steel, engineered to deliver a sharp cutting edge, low cutting forces and consistent surface quality in continuous cuts. Uncoated cermet grade NS9530 Sharp cutting edge for fine finishing 60° triangular form, 0.4 mm corner radius Double‑sided chipbreaker with cylindrical hole Improved surface quality through a finishing‑grade substrate The uncoated cermet NS9530 substrate is optimised for finishing cuts on steel, combining a sharp cutting edge with reduced plastic deformation at the cutting zone. This results in lower cutting forces and improved dimensional stability during continuous turning, which directly benefits surface integrity and reduces the need for secondary finishing. For workshops requiring consistent part quality, the finishing grade supports tight tolerances while keeping tool change frequency low. Reliable fit and straightforward integration with ISO holders The insert’s ISO‑standard geometry and triangular form (60°) provide predictable compatibility with a wide range of external holders and boring bars; dimensions such as 16 mm across and a plate thickness of 4.76 mm are industry standard. Compatibility depends on form, rake, tolerance class, fastening method, size and thickness, so the standardised design simplifies replacement and inventory management. The 0° rake angle and robust substrate make the geometry especially suitable where a stable cutting edge is required for consistent finishing performance. Controlled chips and operational consistency for turning A double‑sided chipbreaker combined with a cylindrical hole for secure clamping promotes reliable chip control and stable cutting conditions during turning. The small 0.4 mm corner radius supports fine surface finishes while providing sufficient edge strength for light to medium finishing passes. Together these features reduce vibration and support repeatable cycle times, aiding efficient production and minimising scrap rates in serial machining of steel components. For precision finishing on steel with the Tungaloy NS9530 grade, contact Metav Werkzeuge for tailored application advice and order handling at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6997823 Manufacturer SKU: TUN6997823 SKU: 6997823-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNGG160404 NS9530 Tungaloy-Wendeplatte Material: cemented carbide Facts Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 60° Rake angle: 0° Special features Grade: NS9530 (uncoated cermet) Chipbreaker: double‑sided Hole: with cylindrical hole Plate form: triangular Intended application: Turning Typical use: external and internal turning; finishing FAQ What materials is this insert suited for? The TNGG160404 NS9530 insert is formulated for finishing operations on steel, with the NS9530 cermet grade offering low cutting forces and high surface quality when turning steel components. How is the insert secured in the holder? The insert features a cylindrical hole for clamping and is compatible with ISO‑type triangular holders that match the TNGG160404 dimensions and tolerance class. How many cutting edges are available per insert? The triangular plate provides multiple usable edges through indexing; the double‑sided chipbreaker layout supports effective reuse of edges while maintaining chip control. What cutting geometry should be expected from this insert? Expect a 60° triangular form with a 0.4 mm corner radius and 0° rake angle, optimised for fine finishing passes and stable edge behaviour. Which SKU identifies this product for ordering? Order reference: SKU 6997823-Tungaloy, Manufacturer SKU TUN6997823, item listed as TNGG160404 NS9530 Tungaloy‑Wendeplatte. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a tough, coated carbide SH725 grade and ISO compatibility for reliable turning performance and predictable tool life; suitable for changing engagement conditions and smaller tooling setups. Order directly via Metav Werkzeuge or consult our specialists for selection and application support. TNGG 160404 SH725 Tungaloy turning insert — ISO triangular 16 mm, coated carbide TNGG160404 SH725 is an ISO-standard triangular indexable insert for external and internal turning, offering a tough, edge-stable coated-carbide grade that performs well in variable engagement and smaller-tool applications. ISO triangular insert, 16 mm size Coated carbide grade SH725 0° relief with 60° geometry Double-sided chipbreaker with cylindrical hole High-performance coated-carbide grade for consistent productivity The coated carbide SH725 composition provides a balance of toughness and edge stability that is especially advantageous when machining with smaller toolholders or under fluctuating cutting conditions. The coating improves wear resistance while the substrate retains fracture toughness, which together reduces tool changes and supports longer tool life. This indexable solution is designed to deliver repeatable cutting behaviour; the coating and substrate combination helps maintain dimensional consistency across serial runs and short production batches. Secure clamping and ISO compatibility for straightforward integration Designed as an ISO-standard indexable plate, compatibility with a suitable holder depends on form, relief angle, tolerance class, fastening method, size and thickness. The triangular geometry with a 0° relief angle and a cylindrical hole ensures positive seating and secure clamping in appropriate external holders or boring bars. The 16 mm size and 4.76 mm thickness provide straightforward integration into established tool systems, while the double-sided chipbreaker enables two cutting positions per insert, improving economy in routine turning tasks. Application-focused design that supports diverse turning tasks Intended for both external and internal turning, the insert’s double-sided chipbreaker and 60° cutting geometry promote controlled chip formation and stable cutting forces when matched to the correct holder and machining parameters. The plate is especially suitable where variable engagement or interrupted cuts occur, since the SH725 grade emphasises stable cutting edges over extreme hardness. For best results, select the chipbreaker and grade to match workpiece material, machining strategy and machine stability, thereby optimising surface finish and tool life. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6737215 SKU: 6737215-Tungaloy Manufacturer SKU: TUN6737215 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 60° Relief angle: 0° Hole: with cylindrical hole Design & special features Coated carbide grade SH725 Triangular plate, ISO designation 160404 Double-sided chipbreaker Suitable for external and internal turning Compatibility determined by form, relief, tolerance, fastening, size and thickness FAQ What cutting operations is this insert intended for? The TNGG160404 SH725 turning insert is designed for external and internal turning, with a double-sided chipbreaker suited to varied engagement conditions. Which grade and coating does the insert feature? This insert uses the coated carbide SH725 grade, which combines toughness and edge stability for reliable performance under changing cutting conditions. How is compatibility with holders ensured? Compatibility is determined by holder form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation and cylindrical hole support secure clamping when matched correctly. How many usable edges does the plate provide? The triangular, double-sided design offers multiple indexed cutting positions, improving economy by permitting the use of more than one cutting edge per plate. Is this insert suitable for interrupted cuts or varying engagements? Yes; the SH725 grade and the insert’s geometry are chosen to provide stable cutting edges and controlled chip formation in variable-engagement scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 SH725 Wendeplatten - Tungaloy
Take advantage of the coated carbide SH725 grade and the 0.4 mm nose radius for accurate profiling and extended edge life; the ISO compatibility and double-sided chipbreaker reduce tooling costs and simplify insert changes. Order the insert via Metav Werkzeuge or request tailored cutting data from our technical advisors. TNGG 160404 SH725 Tungaloy – ISO turning insert, triangular, 0.4 mm nose radius The TNGG 160404 SH725 Tungaloy is an ISO-standard, triangular indexable insert designed for external and internal turning, offering a balance of toughness and stable cutting-edge performance for variable engagement conditions. Coated carbide SH725 grade for toughness and edge stability 0.4 mm nose radius for precise profiling Double-sided chipbreaker for consistent chip control Cylindrical hole for secure mounting Higher productivity through a tough, coated grade The SH725 designation denotes a coated carbide grade engineered for toughness and stable cutting edges, particularly suitable when tool sizes are small or cutting conditions change frequently. The coating reduces flank wear and helps maintain a consistent cutting geometry, which leads to longer edge life and fewer indexings. As a result, cycle times are lowered and overall tool cost per part is reduced without sacrificing surface integrity. Accurate profiles and secure seating for reliable results A 0.4 mm nose radius combined with a triangular geometry and 60° included angle provides controlled contact conditions that improve finish and dimensional accuracy during turning operations. The insert’s cylindrical hole and standardised form ensure repeatable clamping in compatible holders; stiffness is supported by the 4.76 mm plate thickness, which helps resist bending under interrupted cuts. These features together reduce vibration and contribute to predictable tool behaviour. Consistent chip control and economical edge usage The double-sided chipbreaker offers reliable chip formation on both faces, promoting continuous chip evacuation and reducing the likelihood of built-up edge. The reversible design increases the number of usable edges, improving cost efficiency per cutting edge. Compatibility with ISO-standard holders is determined by form, relief angle, tolerance class, fastening method, size and thickness, enabling straightforward replacement within established tool systems. Select the right combination and get application support Choosing the correct chipbreaker and grade for the workpiece and machining strategy is essential: SH725 is aimed at applications requiring toughness and edge stability. For tailored recommendations on holder selection, cutting parameters or replacement strategy, Metav Werkzeuge provides technical support and cutting-data guidance to match the insert to production needs. Detailed machining data and practical advice can be supplied on request via e‑mail or phone. Contact Metav Werkzeuge for specific cutting data, holder compatibility and procurement of the TNGG 160404 SH725 Tungaloy insert — Metav Werkzeuge’s specialists will advise on the best setup for the intended turning application Technical data Article number: 6737221-Tungaloy Manufacturer SKU: TUN6737221 Manufacturer article number: 6737221 Facts Radius: 0.4 mm Included angle: 60° Plate thickness: 4.76 mm Plate size: 16 Special features Coating/grade: SH725 Cutting material: coated carbide Plate form: triangular, double-sided Hole: with cylindrical hole Application: Turning (external and internal) FAQ What turning tasks is this insert intended for? The TNGG 160404 SH725 Tungaloy insert is intended for external and internal turning where a tough, edge‑stable grade is required, especially in smaller tool holders or variable engagement conditions. What benefits does the SH725 grade provide? SH725 is a coated carbide grade that emphasises toughness and a stable cutting edge, helping to extend edge life and maintain surface quality under changing cutting conditions. How is the insert mounted and secured? The insert features a cylindrical hole and follows ISO geometry; compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness for repeatable clamping and secure seating. What does the 0.4 mm nose radius mean for finish and strength? A 0.4 mm nose radius delivers a balance between fine profile accuracy and sufficient edge strength, improving surface finish while resisting premature chipping in typical turning operations. Does the double-sided design affect tooling costs? Yes; the double-sided chipbreaker increases the number of usable edges and reduces the cost per cutting edge, supporting more economical tool consumption and fewer insert changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide grade SH725, precise 60° triangular geometry and a 0.4 mm corner radius for stable cutting-edge life and consistent turning results. Order the insert directly via Metav Werkzeuge or contact our consultants to confirm holder compatibility and optimal chipbreaker selection. TNGG 160404 SH725 triangular turning insert (60°, coated carbide) — Tungaloy TNGG 160404 SH725 is an ISO-standard triangular insert for external and internal turning, designed for variable engagement conditions and small-tool applications. ISO-standard triangular insert, 60° geometry Coated carbide grade SH725 for stable edges 0.4 mm corner radius for fine turning Double-sided, cylindrical hole for secure clamping Consistent performance through geometry and grade The combination of an ISO-standard triangular form and a defined 60° cutting angle gives reliable chip formation and predictable toolpath behaviour. The coated carbide composition, specified as SH725, is formulated for edge stability and toughness, which is particularly valuable in changing engagement conditions or when using smaller toolholders. This results in longer effective cutting intervals and fewer index changes, supporting continuous production and reduced downtime. Improved surface finish with a compact corner radius A 0.4 mm corner radius balances strength and finish: it provides sufficient edge support to resist chipping while enabling close tolerances and fine surface quality in light to moderate turning passes. In combination with the insert’s double-sided design and the integrated chipbreaker, this geometry helps maintain consistent cutting forces, so the workpiece surface texture benefits from reduced vibration and better repeatability. Secure clamping and system compatibility The insert features a cylindrical hole for positive seating and stable fixation; its 4.76 mm plate thickness ensures robust support in standard ISO clamping arrangements. Compatibility with a holder is determined by form, relief angle, tolerance class, clamping method, size and thickness, so matching the insert to an appropriate ISO external holder or boring bar is essential for optimal results. The design supports straightforward indexing and reliable seating under repetitive operations. Application scope and process rationale Intended primarily for turning, this insert is suitable for both external and internal operations when paired with the correct chipbreaker and holder. The SH725 grade and the insert’s geometry promote productive machining with a focus on process security and repeatable surface quality. Selecting the appropriate chipbreaker and grade in line with workpiece material and operational stability will maximise tool life and reduce overall machining costs. Discuss application requirements and obtain tailored cutting data from Metav Werkzeuge for Tungaloy inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Designation: TNGG160404 SH725 Manufacturer article number: 6737218 Manufacturer SKU: TUN6737218 Manufacturer: Tungaloy Specifications Size: 16 mm Plate thickness: 4.76 mm Geometry angle: 60° Corner radius: 0.4 mm Relief angle: 0° Hole style: cylindrical hole Features Coated carbide grade SH725 ISO-standard triangular plate Double-sided with chipbreaker Suitable for external and internal turning Compatibility depends on holder form, relief angle, tolerance class and clamping FAQ What applications is this insert suited for? This TNGG 160404 SH725 insert is designed for external and internal turning; choose the chipbreaker and grade to match the workpiece material and machining conditions. How does the SH725 grade affect performance? The SH725 coated carbide provides improved edge stability and toughness, which helps maintain tool life under variable engagement and with smaller tooling setups. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm radius offers a compromise between edge strength and fine surface quality, supporting close tolerances while reducing the risk of edge chipping. Is the insert compatible with standard ISO holders? The insert is ISO-standard, but compatibility requires matching the holder by form, relief angle, tolerance class, clamping method, size and thickness. What clamping features does the insert have? The insert has a cylindrical hole for positive seating and is double-sided, enabling secure clamping and straightforward indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 SH725 Wendeplatten - Tungaloy
Combine the robustness of the SH725 coated carbide grade with the 60° triangular geometry and a 0.4 mm corner radius to achieve stable cutting edges and flexible turning performance. Order the insert directly via Metav Werkzeuge or contact our consultants for selection support. TNGG160404 SH725 ISO triangular indexable insert (60°) — Turning, Tungaloy A TNGG160404 SH725 indexable insert designed for external and internal turning, compatible with ISO toolholders and optimised for variable engagement conditions. ISO triangular insert TNGG, 60° geometry Coated carbide grade SH725 for tough conditions 0.4 mm corner radius for versatile finishing Dual-sided chipbreaker with cylindrical hole Consistent edge life for continuous machining The SH725 grade is a coated carbide formulation developed to maintain a resilient cutting edge under fluctuating cutting forces. This indexable solution reduces downtime through prolonged edge life, which leads to more predictable tool-change intervals and fewer interrupted production runs. The coating improves wear resistance and heat management, so the insert remains dimensionally stable during extended cycles, supporting reliable component tolerances. Geometry that simplifies set-up and process choice The 60° geometry of the triangular insert provides favourable cutting directions for both facing and profiling, while the 0.4 mm corner radius allows a balance between strength and surface finish. The three-sided shape gives multiple index positions and, together with the dual-sided chipbreaker, enables straightforward switching between roughing and finishing tasks. These design choices translate into fewer tool variants needed on the shop floor and reduced set-up complexity for mixed-production environments. Secure mounting and straightforward tool compatibility Compatibility with the clamping system is determined by form, relief angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole for positive location and stable clamping on standard ISO holders. The nominal plate thickness and format match ISO indexing systems, which permits rapid retrofitting into existing toolholders without bespoke adaptors. Clear specification of geometric and tolerance data ensures reproducible seating and concentricity in serial production. Suited to small tools and changing engagement conditions This grade and chipbreaker combination is particularly useful for smaller tool assemblies or operations with variable engagement, where intermittent cuts and changing chip loads occur. The double-sided chipbreaker helps control chips in interrupted cutting and mixed-material batches, while the coated substrate supports steady wear behaviour across different turning tasks. Select the appropriate chipbreaker and holder rigidity to align the insert’s strengths with the workpiece material and machine stability. Contact Metav Werkzeuge for tailored application advice and fast availability of Tungaloy SH725 inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6734047 Manufacturer SKU: TUN6734047 Seller SKU: 6734047-Tungaloy Name: TNGG160404 SH725 Tungaloy indexable insert Model series: ISO-Drehwendeschneidplatten Core specifications Insert geometry: triangular, 60° Size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Hole: cylindrical (with hole) Chipbreaker: double-sided Materials & features Material: coated cemented carbide Grade: SH725 Typical application: external and internal turning Compatibility: ISO toolholders (form, relief, tolerance class, clamping) System: indexable insert, holder, clamp and screw FAQ What operations is this insert intended for? This TNGG160404 SH725 insert is designed primarily for external and internal turning applications where a resilient cutting edge and flexible geometry are required. Which workpiece conditions suit the SH725 grade? The SH725 grade performs well under variable engagement and in smaller-tool applications; it is formulated to provide stable wear characteristics and reliable edge life during mixed or interrupted cutting. How is the insert fixed in the holder? The insert locates and clamps via a cylindrical hole and is secured by a clamp and screw; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. How many indexable edges are available on this triangular, double-sided insert? The triangular, double-sided design provides up to six indexable cutting edges, enabling multiple re-uses before disposal. Can the same insert be used for roughing and finishing? Yes — by selecting the appropriate chipbreaker and matching holder rigidity, the insert’s geometry and grade allow transitions between roughing and finishing with minimal tool changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 SH725 Wendeplatten - Tungaloy
Benefit from a productive combination of coated carbide SH725, a 60° triangular geometry and a 0.4 mm corner radius for consistent turning results and reliable edge stability. Order the insert directly via Metav Werkzeuge or consult the team for selection advice. TNGG160404 SH725 ISO turning insert — TNGG 160404, triangular 60°, by Tungaloy TNGG160404 SH725 is an ISO‑standard indexable insert for turning, engineered for external and internal operations where small tools or variable engagement demand a tough, edge‑stable grade. Triangular ISO insert, 60° geometry Coated carbide grade SH725 for edge stability 0.4 mm corner radius for versatile turning Cylindrical hole with double-sided chipbreaker Consistent cutting performance for everyday turning The insert combines a coated carbide substrate with the SH725 grade to deliver a stable cutting edge under fluctuating engagement conditions. The material selection and coating process provide toughness that helps resist chipping during interrupted cuts and when using smaller toolholders. Because the plate follows the ISO geometry, mechanical compatibility with matching holders is straightforward: fit depends on form, relief angle, tolerance class, fastening method, size and thickness. This standardisation allows efficient tool changeover and predictable process control, supporting a reduction in setup times and scrap rates for medium‑volume production. Geometry and edge preparation that broaden application range A 60° triangular shape with a 0.4 mm corner radius and 0° relief angle gives a balance between versatility and strength. The small corner radius supports general turning tasks where a fine radius is needed for finish or when avoiding excessive tool overhang; it also aids in approaching tighter workpiece profiles. The insert’s double-sided chipbreaker provides two usable cutting edges per index, increasing tool life and lowering tooling costs per component. The presence of a cylindrical hole ensures secure clamping in many standard clamp systems, and the 4.76 mm plate thickness contributes to stiffness and resistance to vibration in lighter setups. Compatibility, handling and process advantages This indexable plate is part of an ISO insert series that requires selection of a suitable external holder or boring bar, a supporting shim or clamp kit and the correct screw for secure fixation. The coated carbide SH725 grade is optimised for toughness and edge stability, making it particularly appropriate when machining with smaller tools or when cutting conditions change during the cycle. Selecting the correct chipbreaker and type for the workpiece material and machining strategy is essential: when chosen accordingly, the system reduces cycle variability and improves repeatability, which is especially valuable on automated lathes or mixed batch operations. Practical benefits in the workshop and planning guidance Using these triangular ISO inserts supports economical stock management: each plate gives multiple indexing opportunities and simplified reordering through a clear article number and SKU. The robust grade and geometry reduce downtime caused by frequent insert failures, while the ISO standard form aids compatibility across suppliers of holders. For process planners, the combination of a coated carbide body, double-sided chipbreaker and standardised mounting means easier simulation and more reliable feeds and speeds estimation. When optimised for a specific material and machine rigidity, this insert contributes to stable chip formation and productive metal removal rates. For reliable turning performance with Tungaloy’s SH725 grade, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737224 Manufacturer SKU: TUN6737224 SKU: 6737224-Tungaloy Label: TNGG160404 SH725 Tungaloy-Wendeplatte Numbers / Core technical data Corner radius: 0.4 mm Included angle: 60° Plate thickness: 4.76 mm Plate size: 16 mm Designs / Special features Plate form: triangular Relief angle: 0° Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Material: coated carbide (SH725) Application: Turning Model series: ISO indexable turning inserts FAQ What operations is this insert suitable for? The plate is designed for external and internal turning; the grade and chipbreaker make it suitable for variable engagement and smaller toolholders when configured correctly. How does the SH725 grade influence performance? SH725 is a coated carbide grade that prioritises toughness and edge stability, which helps maintain cutting performance during interrupted cuts and under changing engagement conditions. Which holders and components are required for mounting? A compatible external holder or boring bar, a matching shim or clamping kit and the correct fastening screw are required; compatibility depends on plate form, relief angle, tolerance class, fastening method, size and thickness. How many usable edges does the insert offer? With its triangular shape and double-sided chipbreaker, multiple usable cutting edges are provided by indexing the plate according to ISO standards. What is the exact product reference for reordering? The product is listed as TNGG160404 SH725 with article number 6737224 and manufacturer SKU TUN6737224. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160404 TH10 Wendeplatten - Tungaloy
Benefit from precise ISO geometry, the TH10 uncoated carbide grade and a compact triangular design that together ensure low cutting forces and a clean surface finish in turning operations. Order the insert directly via Metav Werkzeuge or consult the Metav advisors for compatibility and application advice. TNGG 160404 TH10 — Turning insert (triangular, 60°) by Tungaloy A TNGG160404 TH10 turning insert designed for ISO‑standard external and internal turning; best suited to non‑ferrous materials and applications requiring low cutting forces and fine surface quality ISO‑standard triangular form for holder compatibility Uncoated carbide grade TH10 for low cutting forces 0.4 mm corner radius for fine finishing Double‑sided with cylindrical hole for secure fastening Precise geometry for consistent turning results The insert’s ISO‑standard geometry and the TH10 uncoated carbide grade deliver reliable, repeatable performance in production turning. The combination of an accurately defined 60° insert angle and a 0.4 mm corner radius reduces vibration and helps maintain a steady cutting force, which supports a clean surface finish on non‑ferrous components. For machining operations where low cutting force and minimal thermal sensitivity matter, the uncoated substrate provides sharp cutting edges that promote predictable chip formation and efficient material removal. Robust clamping and compatibility with standard toolholders Compatibility with the toolholder is driven by form, clearance angle, tolerance class, attachment method, size and thickness. The triangular plate with a cylindrical hole and double‑sided cutting faces enables secure clamping and economical indexability — turning performance continues after flipping the insert to a fresh edge. The 4.76 mm plate thickness and standard 16 mm size fit common external holders and boring bars; the system typically comprises an ISO insert, a suitable external holder or boring bar, a backing plate/clamp set and replacement screws. This design reduces downtime and simplifies stock management in mixed‑material shops. Application advantages and economical shop use Designed primarily for turning, the insert is suited to both external and internal operations where low cutting forces and good surface quality are priorities. The uncoated carbide grade supports sharp cutting edges that excel on aluminium, brass and other non‑ferrous materials, delivering efficient cutting and reduced burr formation. The double‑sided configuration extends service life per insert and lowers tooling costs per component. For production environments needing consistent results and straightforward insert replacement, this indexable solution offers a pragmatic balance of performance and economy. Contact Metav Werkzeuge today for selection support or to arrange a supply of TNGG160404 TH10 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6808184 Manufacturer SKU: TUN6808184 SKU: 6808184-Tungaloy Material: cemented carbide Model series: ISO turning inserts Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Hole: cylindrical Insert angle: 60° Special features Shape: triangular, double‑sided Grade: TH10 (uncoated carbide) Chipbreaker: double‑sided Application: turning (external and internal) Compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness FAQ Which materials are best machined with this insert? The TNGG160404 TH10 insert is specified for non‑ferrous materials and situations where an uncoated carbide with low cutting forces gives cleaner surfaces and controlled chip formation. Is the insert single‑ or double‑sided? This triangular insert is double‑sided, allowing indexable use on both faces; it includes a cylindrical hole for secure fastening. How is holder compatibility ensured? Compatibility is determined by the holder’s form, relief angle, tolerance class, fastening method, size and thickness; the ISO‑standard plate dimensions support common external holders and boring bars. What surface finish can be expected with this grade? The TH10 uncoated grade supports sharp cutting edges and reduced cutting forces, typically producing a fine surface finish on aluminium and other non‑ferrous parts. Can the insert be used for internal turning? Yes — the insert’s geometry and size enable both external and internal turning applications when mounted in an appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com