TNGG 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing, low cutting forces and multidirectional flexibility to reduce tool changes and secure consistent surface quality; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNGG 160408 NS9530 TNGG insert for turning — triangular cermet, 60° (Tungaloy) TNGG160408 is a triangular indexable insert optimised for finishing in turning applications within a multidirectional system. Uncoated cermet NS9530 for fine finishing Triangular insert, 60° included angle Double-sided chipbreaker for continuous cuts Cylindrical hole and 0.8 mm corner radius High-quality finishing for steel workpieces The uncoated NS9530 grade is a cermet formulated specifically as a finishing grade for steel, delivering a sharp cutting edge and low cutting forces that translate into superior surface finish and reduced tendency for built-up edge. In practice, this means the insert excels during small depths of cut and continuous cutting operations typical in finishing passes, where stability and repeatability are paramount. The result is fewer reworks and a consistently higher-quality component surface. Geometry tuned for multidirectional turning systems Designed for the AddMultiTurn model series, the insert's triangular shape and 60° included angle enable versatile positioning for longitudinal, facing and profiling operations within a multidirectional turning system. The double-sided chipbreaker supports continuous cutting directions, while the cylindrical hole ensures reliable clamping in changers and holders. Together, these geometric features reduce tool change frequency and enable flexible process layouts on modern lathes. Operational benefits: efficiency and process stability With a corner radius of 0.8 mm, the insert balances edge strength and fine surface generation, helping to lower vibration and improve dimensional control during finish passes. The cermet substrate provides a stable edge for repeatable cutting, which can lead to shorter cycle times when combined with optimised feed and speed settings. For production environments that value consistent part quality, this combination supports high process reliability and predictable performance over extended runs. Simple integration and practical handling The insert is supplied in the ISO designation TNGG160408, compatible with standard triangular holders and clamping systems used in multidirectional turning setups. Plate thickness and form deliver straightforward mounting and indexing for efficient use in indexable tooling systems. For further machining guidance, cutting data or compatibility checks, Metav Werkzeuge can provide application advice and technical details to help align the insert to specific machines and workpiece materials; contact details are provided below. Contact Metav Werkzeuge for tailored application advice on this Tungaloy NS9530 finishing insert and to secure authentic stock; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6997849 SKU: 6997849-Tungaloy Manufacturer article number: TUN6997849 Model series: AddMultiTurn Designation: TNGG160408 Core dimensions Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 60° Features & materials Grade: NS9530 (uncoated cermet) Material: carbide Shape: triangular Chipbreaker: double-sided Hole: with cylindrical hole Typical application: Turning — longitudinal, facing, profiling FAQ What workpiece materials is this insert intended for? The NS9530 cermet grade is optimised for machining steel, providing a finishing edge and low cutting forces suitable for high-quality surfaces. Can the insert handle continuous finishing cuts? Yes, the double-sided chipbreaker and the stable cermet edge make the insert well suited to continuous cuts and small depths of cut during finishing operations. Is the insert coated? The TNGG160408 insert is an uncoated cermet grade (NS9530), chosen to maintain a sharp cutting edge for superior surface quality. Which system is this insert designed for? This indexable plate is part of the AddMultiTurn multidirectional turning system and is compatible with triangular holders designed for the TNGG form. What are the key dimensional details to check before ordering? Verify the 16 mm insert size, 4.76 mm plate thickness and 0.8 mm corner radius to ensure correct fit and the desired finishing characteristics. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 NS9530 Wendeplatten - Tungaloy
Benefit from the blend of a sharp cutting edge and low cutting forces from the NS9530 finishing grade, combined with a robust triangular geometry and secure clamping; order the TNGG160408 NS9530 indexable insert via Metav Werkzeuge or consult our advisors for process parameters and application support. TNGG 160408 NS9530 indexable insert for turning by Tungaloy The TNGG160408 NS9530 is a triangular, multiturn indexable insert designed for multidirectional turning applications, delivering a finishing-focused performance in steel machining. TNGG160408 triangular insert, 16 mm size NS9530 cermet for high surface finish 0.8 mm corner radius, sharp cutting edge Double-sided chipbreaker for continuous cuts Increase process efficiency with a finishing-grade cermet The NS9530 grade is an uncoated cermet developed for finishing operations in steel, offering a high surface finish with reduced need for subsequent machining. Its combination of a sharp cutting edge and low cutting resistance leads to a predictable metal removal rate and less mechanical stress on the toolholder, which supports longer uninterrupted cycles and a more stable production flow. This results in fewer rework cycles and a clearer path to consistent part quality. Flexible usage across turning directions reduces tool changeover Built for the AddMultiTurn system, this insert supports multidirectional turning such as longitudinal, facing and profile operations without frequent tool swaps. The triangular form and 60° included angle deliver versatile orientation options while the 16 mm size offers a balance between rigidity and accessibility in confined tool pockets. The result is a reduction in process interruptions and improved machine utilisation for medium to high-volume turning tasks. Predictable geometry and reliable chip control for consistent surfaces The geometry provides a 0.8 mm corner radius that is well suited to small depth-of-cut finishing passes, producing fine surface textures while maintaining edge stability. The double-sided chipbreaker supports efficient chip formation during continuous cuts, and the insert’s secure clamping via a cylindrical hole ensures repeatable seating and minimal vibration. The body is manufactured from carbide, delivering the necessary substrate stiffness to exploit the cermet cutting edge effectively. Contact Metav Werkzeuge for tailored cutting data or to place an order for the TNGG160408 NS9530 insert — call +49 2822 7131930 or email info@metav-werkzeuge.com for application advice and availability Technical data Article number: 6997841 SKU: 6997841-Tungaloy Manufacturer SKU: TUN6997841 Model series: AddMultiTurn Designation: TNGG160408 NS9530 Core specifications Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Hole style: cylindrical hole Materials & special features Grade: NS9530 Cutting material: uncoated cermet Body material: carbide Shape: triangular Chipbreaker: double-sided Application: turning (longitudinal, facing, profiling) FAQ What applications is this insert best suited for? The TNGG160408 NS9530 insert is optimised for finishing in turning applications, including longitudinal turning, facing and light profiling of steel. Which materials can be machined with this grade? The NS9530 uncoated cermet on the TNGG160408 is designed primarily for steel, delivering high surface quality and low cutting forces in continuous cutting conditions. How does the insert’s geometry affect surface finish? The 0.8 mm corner radius and sharp edge of the TNGG160408 NS9530 promote fine surface textures during small-depth finishing passes, reducing the need for additional finishing. Is the insert reversible or indexable on both sides? The TNGG160408 is fitted with a double-sided chipbreaker and a central cylindrical hole that enable reliable seating and indexing for multiple cutting edges. What clamping style is required for this insert? A compatible clamp and pocket designed for triangular inserts with a cylindrical hole are required to secure the TNGG160408 NS9530 and ensure stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet grade (NS9530), a 0.8 mm corner radius for accurate profiles and a design optimised for the AddMultiTurn multidirectional turning system to keep cycle times short and surface quality high; order via Metav Werkzeuge or consult our advisors for application recommendations. TNGG160408 NS9530 triangular turning insert – finishing grade by Tungaloy The TNGG160408 NS9530 is a triangular turning insert designed for multidirectional turning applications, providing a finishing-grade cermet geometry for fine longitudinal, facing and profiling operations. Multidirectional turning compatibility Sharp cermet grade for finishing 0.8 mm corner radius for fine profiles Double-sided chipbreaker, triangular form Consistent fine surface finish for finishing cuts The NS9530 grade is an uncoated cermet developed to deliver a high surface finish and consistently low built-up edge during continuous cutting. Cermet combines ceramic and metallic phases to reduce friction and preserve a sharp cutting edge, which is why this insert is particularly suited to finishing operations on steel where small depths of cut and smooth, repeatable profiles are required. The result is fewer downstream polishing passes and reduced finishing time per component. Reduced tool changes and greater process flexibility Built for the AddMultiTurn multidirectional system, the triangular insert shape with a central cylindrical hole and a double-sided chipbreaker allows reversible indexing and secure clamping in a variety of holder designs. This configuration reduces the need for frequent tool changes in setups that require multiple cutting directions, improving uptime and simplifying tool inventory management. The combination of reversible edges and stable clamping supports reliable repeatability in batch production. Geometry and stability for precise profile control With a 0.8 mm corner radius, a 60° wedge angle and a thickness of 4.76 mm, the insert offers dimensional stability for delicate profile and form turning. The small radius helps maintain edge strength while delivering the contour fidelity needed for finishing passes; the moderate thickness contributes to bending resistance under interrupted cuts. The insert’s 0° relief angle and triangular form provide predictable contact geometry, which aids in consistent chip flow and dimensional control when paired with appropriate feed and speed settings. Contact Metav Werkzeuge for specific application advice on Tungaloy finishing inserts, availability and compatible holders via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Designation: TNGG160408 Manufacturer article number: 6997840 Manufacturer SKU: TUN6997840 SKU: 6997840-Tungaloy Model series: AddMultiTurn Brand: Tungaloy Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Wedge angle: 60° Relief angle: 0° ISO code: 160408 Special features Grade: NS9530 (uncoated cermet) Insert shape: triangular Hole: cylindrical Chipbreaker: double-sided Application: turning (longitudinal, facing, profiling) Typical use: finishing, continuous cuts FAQ Is this insert suitable for roughing operations? The TNGG160408 NS9530 is engineered as a finishing-grade cermet insert and is optimised for fine finishing and continuous cuts; it is not primarily intended for heavy roughing but can be used for light stock removal under controlled conditions. Which base materials is this grade intended for? The NS9530 grade is designed for machining steel, offering low cutting forces and good surface quality in finishing applications on a wide range of steels. Can the insert be used in multidirectional toolholders? Yes. The insert’s geometry and the AddMultiTurn model series compatibility make the TNGG160408 suitable for multidirectional turning systems that accept triangular, hole-mounted inserts. What holder features are required for secure clamping? The centrally located cylindrical hole and triangular form require a matching clamping design with positive seating; the double-sided chipbreaker supports stable chip control when clamped correctly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and compatibility with a multidirectional turning system for smooth production. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. TNGG160408 NS9530 Tungaloy indexable insert — triangular cermet insert, 60° geometry, for finishing steel A TNGG160408 NS9530 indexable insert designed for multidirectional turning and finishing operations on steel, supplied with a cylindrical hole for secure clamping in modular holders. Triangular insert, 60° cutting geometry Uncoated cermet grade NS9530 for fine finishes Double-sided chipbreaker for continuous cuts Compatible with AddMultiTurn multidirectional system Precise finishing with low cutting forces The cermet NS9530 grade is optimised for finishing of steel, delivering a high surface quality with reduced cutting forces. Cermet combines ceramic and metallic phases to keep the cutting edge sharp and thermally stable; this results in consistent part finishing and longer edge life under small depths of cut. The result is a reliable route to improved process stability and fewer rework cycles when demanding surface tolerances are required. Productivity through multidirectional turning Built for the AddMultiTurn system, the insert enables machining in multiple directions with a single tool assembly, reducing tool changes and downtime. The 60° geometry and triangular shape give flexibility in approach angles, while the double-sided chipbreaker supports continuous cutting by controlling chip formation. Together these features provide an efficient solution for long runs where consistent chip control and repeatable quality are essential. Mounting, compatibility and practical data for setup The insert includes a cylindrical hole for positive locating and is available in size 16 mm with a thickness of 4.76 mm and a corner radius of 0.8 mm, which is suitable for fine finishing and profile details. The neutral relief angle of 0° supports stable contact with the workpiece when used in suitable holders. As a finishing grade, it is intended for continuous cuts and small depths of cut; pairing the insert with the correct holder and machine rigidity ensures the best combination of surface finish and tool life. Choose Tungaloy’s NS9530 cermet insert for dependable finishing performance and contact Metav Werkzeuge for tailored process recommendations and immediate availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997824 Manufacturer SKU: TUN6997824 SKU: 6997824-Tungaloy Core data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Cutting angle: 60° Special features Uncoated cermet grade NS9530 Triangular plate form Cylindrical hole for locating Double-sided chipbreaker Designed for multidirectional turning (AddMultiTurn) Intended application: turning (finishing steel) FAQ Is this insert suitable for finishing steel? The TNGG160408 NS9530 insert from Tungaloy is specifically formulated as a finishing grade for steel, offering a sharp cutting edge and low cutting forces for superior surface quality. Can the insert be used in multidirectional setups? Yes, the plate is designed for use in the AddMultiTurn multidirectional turning system and is compatible with holders that accept a triangular, holed insert. What does NS9530 mean for chip control? NS9530 denotes an uncoated cermet grade that provides stable edge condition and, combined with the double-sided chipbreaker, promotes predictable chip formation during continuous cuts. Which dimensions are relevant for holder selection? Key dimensions for the insert are 16 mm size, 4.76 mm thickness and a 0.8 mm corner radius; the plate form is triangular with a cylindrical hole for locating. Is the insert suitable for interrupted cuts or heavy roughing? This grade and geometry are optimised for finishing and continuous cutting with small depths of cut; heavy roughing or highly interrupted cuts are outside the intended application range. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 SH725 Wendeplatten - Tungaloy
Benefit from the combination of a coated carbide SH725 grade, a 60° triangular geometry and a 0.8 mm corner radius for stable cutting under variable engagement; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNGG 160408 SH725 Tungaloy indexable insert for turning (AddMultiTurn, 60°) TNGG160408 SH725 is an indexable insert designed for multidirectional turning operations, offering a compact triangular form for longitudinal, facing and profiling tasks. Multidirectional turning system Coated carbide grade SH725 Triangular 16 mm insert, 60° geometry Cylindrical hole for secure clamping Improved cycle times with multidirectional capability The AddMultiTurn system enables machining in several directions with a single insert, which reduces tool changes and increases machine uptime. The combination of the multidirectional concept and a compact insert design supports more productive setups in turning centres and lathes. For operations that alternate between longitudinal cutting, facing and light profiling, the system architecture—comprising holder, replaceable inserts and a robust clamping mechanism—translates directly into fewer interruptions and more consistent throughput. Consistent edge performance under varying conditions The SH725 coated carbide grade is formulated for toughness and edge stability, especially suited to smaller tools or fluctuating engagement depths. The insert’s double-sided chipbreaker and 0.8 mm corner radius help maintain a steady cutting edge and predictable chip formation, which reduces vibration and improves surface finish. These features make the insert a reliable choice where process stability and repeatability are required under mixed cutting conditions. Geometry and dimensions that support versatility A 60° included angle and a 16 mm inscribed circle size combine to offer strength and accessibility in confined toolpaths. The plate thickness of 4.76 mm and a relief angle of 0° explain the insert’s rigidity and the way it seats in the pocket, while the triangular shape provides three usable cutting edges per side. Such geometry is beneficial for finishing and medium-duty operations where tool life and edge life are priorities. System integration for predictable production As a component of a matched tool system, the insert works with purpose-made holders and clamping parts to ensure repeatable positioning and secure fixation via the cylindrical hole. This mechanical consistency reduces setup variation and inspection cycles. The result is a pragmatic balance between cutting performance and operational economy, delivering measurable advantages for batch production and frequent changeovers. Contact Metav Werkzeuge for availability and tailored advice on using this insert in specific turning processes; reach us at info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation Technical data Article number: 6737219 Manufacturer SKU: TUN6737219 Model series: AddMultiTurn Material: Carbide Facts Corner radius: 0.8 mm Inscribed circle / size: 16 mm Plate thickness: 4.76 mm Included angle: 60° Relief angle: 0° Special features Coated carbide grade SH725 Triangular plate form Double-sided chipbreaker Cylindrical hole (secure clamping) Multidirectional turning compatibility Application: turning — longitudinal, facing, profiling System components: holder, replaceable inserts, clamping system Manufacturer article name: TNGG160408 SH725 Tungaloy indexable insert FAQ What turning operations is this insert best suited for? This insert is designed for longitudinal turning, facing and profiling, benefiting from the AddMultiTurn system for multidirectional use. What material is the insert made from and what is the grade? The insert is made from carbide and supplied in the SH725 coated grade for toughness and stable cutting edges. How many cutting edges are available per insert? The triangular form provides multiple usable edges; the design offers three indexable cutting corners per side, giving efficient edge rotation. What is the corner radius and how does it affect surface finish? The corner radius is 0.8 mm; a moderate radius improves edge strength and contributes to a consistent surface finish while controlling cutting forces. How is the insert secured in the holder? Fixation is via a cylindrical hole and the corresponding clamping system of the AddMultiTurn toolholder to ensure repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 SH725 Wendeplatten - Tungaloy
Benefit from a compact, productivity-focused insert that combines the SH725 coated carbide grade and a 0.8 mm corner radius for robust edge life and reliable chip control in multi-directional turning operations; order directly via Metav Werkzeuge or consult our technical advisors for application support. TNGG 160408 SH725 TNGG turning insert by Tungaloy — triangular, 0.8 mm radius for multidirectional turning A TNGG160408 SH725 indexable insert designed for multidirectional turning in longitudinal, facing and profile operations, compatible with the AddMultiTurn system for flexible tool setups. SH725 coated carbide for stable cutting edges Multidirectional AddMultiTurn system compatible Triangular 16 mm plate with 0.8 mm corner radius Double-sided chipbreaker, cylindrical hole Reduce tool changes and increase throughput with a multidirectional system The AddMultiTurn concept enables a single tool assembly to tackle several machining directions, lowering set-up time and minimising idle machine minutes. Engineered for multiaxis turning, the system supports efficient process flows by allowing controlled indexation and secure clamping of the triangular insert. The combination of the AddMultiTurn compatibility and the SH725 grade delivers a practical balance of toughness and wear resistance, which translates into fewer interventions and improved overall productivity on batching and mixed-operation runs. Stable cutting edges and predictable chip behaviour for mixed conditions The SH725 grade is a coated carbide designed for edge stability under varying entry angles and interrupted cuts; its toughness makes it particularly suited to smaller cutters and changing engagement. The insert’s double-sided chipbreaker improves chip formation and evacuation in turning, reducing the risk of built-up edge and surface marks. With a corner radius of 0.8 mm, the geometry provides a compromise between edge strength and achievable surface finish, delivering consistent results in general turning and profiling tasks while helping to extend tool life. Accuracy and secure clamping for repeatable finishes A triangular plate with a 16 mm size and a 60° geometry gives stable support within standard turning holders and promotes predictable cutting forces. The plate thickness of 4.76 mm and the cylindrical hole allow reliable clamping with common screw or clamp systems, while the 0° clearance angle suits a variety of facing and longitudinal turning profiles. These features combine to produce reproducible part geometry and surface quality, making the insert a practical choice where repeatability and consistent cycle times are required. For reliable turning performance with SH725-coated inserts, contact Metav Werkzeuge for availability and tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737214 SKU: 6737214-Tungaloy Manufacturer SKU: TUN6737214 Model series: AddMultiTurn Product designation: TNGG160408 SH725 Numbers / Core technical data Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Angle: 60° Clearance angle: 0° Designs / Special features Coating: SH725 Material: coated carbide Double-sided chipbreaker Triangular plate with cylindrical hole Compatible with multidirectional AddMultiTurn system Typical applications: longitudinal, facing, profile turning With hole: cylindrical FAQ What applications is this insert best suited for? The insert is intended for turning, covering longitudinal turning, facing and profile turning; the TNGG160408 SH725 plate is optimised for multidirectional tool assemblies. How does the SH725 grade perform with changing cutting conditions? SH725 is a tough, wear-resistant coating grade formulated for stable cutting edges in variable engagement, making it resilient in interrupted cuts and small-tool applications. Can the insert be clamped in common turning holders? Yes; the triangular 16 mm design, cylindrical hole and 4.76 mm plate thickness are compatible with standard clamping systems used with AddMultiTurn-compatible holders. What chip control benefits does this geometry provide? The double-sided chipbreaker promotes consistent chip formation and evacuation, reducing built-up edge and supporting surface quality during continuous and semi-interrupted turning. Is this insert reversible or indexed on both sides? The insert is double-sided, offering multiple usable edges to extend in-process life and lower replacement frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide grade SH725 for stable cutting edges, a triangular 16 mm form with a 0.8 mm corner radius for precise finishing, and the multidirectional AddMultiTurn system for flexible turning operations. Order the TNGG160408 SH725 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TNGG 160408 SH725 Tungaloy indexable insert for turning (AddMultiTurn) A TNGG160408 SH725 indexable insert engineered for multidirectional turning in the AddMultiTurn system, suitable for longitudinal, facing and profile turning. Coated carbide grade SH725 for stable cutting edges Multidirectional AddMultiTurn system compatibility Triangular insert, 16 mm size, 60° cutting geometry 0.8 mm corner radius for precise finishing Cylindrical hole, double-sided chipbreaker Greater process reliability through material and coating selection The combination of cemented carbide substrate and the SH725 coating delivers consistent edge stability under varying engagement conditions, making the insert particularly effective where cut conditions change frequently. The coated carbide composition reduces flank wear and extends usable edge life, which supports predictable cycle times and reduces tool change frequency. For workshops focused on productivity, this translates into fewer interruptions and a more reliable production flow. Versatile use across turning operations Designed for the AddMultiTurn multidirectional system, the insert enables several machining directions with a single toolholder, allowing efficient switching between longitudinal, facing and profile turning. The triangular geometry with a 60° cutting angle and 16 mm size offers a balance between strength and accessibility in confined toolpaths. This versatility reduces tooling complexity on the shop floor and supports compact tooling assemblies where multiple orientations are required. Precision finishing and chip control for consistent surfaces The 0.8 mm corner radius contributes to controlled cutting forces and a consistent surface finish on workpieces. The insert’s double-sided chipbreaker improves chip formation for typical turning tasks, helping to avoid long, stringy chips and to protect the workpiece surface. The presence of a cylindrical hole ensures secure clamping and reproducible seating in the holder, which is essential for repeatable accuracy in series production. System integration and handling benefits Supplied for the AddMultiTurn model series, the indexable insert is part of a system comprising holders, inserts and clamping components intended for fast, secure assembly. The triangular insert form allows multiple indexing positions, increasing tool utilisation before regrind or disposal is needed. Clear specification of insert thickness 4.76 mm, form and hole style supports straightforward selection of compatible holders and reduces setup uncertainty in workshop practice. For application advice or to secure TNGG160408 SH725 inserts from Tungaloy, contact Metav Werkzeuge for tailored recommendations and rapid delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6737216 Manufacturer SKU: TUN6737216 Model series: AddMultiTurn Material: cemented carbide Coating / grade: SH725 Core dimensions Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Cutting angle: 60° Features Triangular insert form Cylindrical hole Double-sided chipbreaker Multidirectional turning system compatibility Typical application: turning (longitudinal, facing, profiling) FAQ What materials is this insert suitable for? The TNGG160408 SH725 insert from Tungaloy is optimised for a broad range of turning applications; the SH725 coating and carbide substrate provide stable cutting edges across many common steels and mixed conditions. How does the AddMultiTurn system benefit production? Using the AddMultiTurn-compatible insert reduces tooling complexity by enabling multiple machining directions with a single holder and insert, improving setup flexibility and throughput. What is the corner radius and why does it matter? The corner radius is 0.8 mm, which helps balance cutting forces and surface finish; a defined radius supports consistent results during finishing passes. Is the insert reversible or indexable? The triangular form and double-sided chipbreaker enable multiple usable cutting edges, allowing several indexing positions before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 SH725 Wendeplatten - Tungaloy
Take advantage of a multidirectional system that reduces tool changes and delivers consistent edge life thanks to a tough, coated carbide grade and a robust corner radius; order the insert directly via Metav Werkzeuge or consult our specialists for cutting-data recommendations. TNGG 160408 SH725 – Turning insert, coated carbide, r0.8, 60° by Tungaloy The TNGG160408 SH725 is a triangular, coated cemented-carbide indexable insert designed for multidirectional turning applications, combining a stable cutting edge with a geometry suited to longitudinal, facing and profiling operations. Coated cemented-carbide SH725 grade Triangular 16 mm insert form TNGG 60° included angle for versatile turning Double-sided chipbreaker with cylindrical hole Increase throughput with multidirectional turning The AddMultiTurn concept allows one insert to be used across multiple machining directions, cutting down tool inventories and machine downtime. By integrating a multidirectional turning system, setup changes are minimised and process flow becomes more predictable. The insert’s compatibility with standard clamping systems within the model series ensures quick indexability and steady repeatability, supporting a reliable production rhythm and reduced non-productive time. This design is particularly effective where frequent direction changes or compact tool geometries would otherwise cause excessive tool swaps. Stable cutting edges for variable entry conditions The SH725 coating on a cemented-carbide substrate provides a balance of toughness and edge stability, tailored for operations with fluctuating engagement or smaller-diameter tooling. The r0.8 corner radius increases edge strength and reduces the risk of premature chipping under interrupted cuts, while the double-sided chipbreaker helps control chip flow and surface quality. Together, these features extend productive tool life and contribute to consistent workpiece finish, which in turn lowers rework rates and supports tighter process windows. Compact design that fits modular tool systems With a 16 mm triangular form and a thickness of 4.76 mm, the insert integrates seamlessly into modular holders and clamping units intended for the series. The cylindrical hole offers secure seating and straightforward clamping, while the 60° included angle provides a versatile geometry for turning, profiling and facing tasks. The compact footprint permits use in restricted setups and reduces interference in multi-tasking applications, enabling efficient use of spindle clearance and allowing higher tool-packet density on the turret. Practical application guidance for stable performance This indexable plate is optimised for turning scenarios where entry conditions change or where compact tooling is required. The combination of a tough coated grade and a controlled chipbreather fosters predictable wear behaviour and reproducible cutting results. For shop-floor planning, consider the insert’s benefits for small-diameter operations and mixed-direction cycles: fewer tool variants, lower stocking complexity and a streamlined tool-change routine contribute directly to improved shop productivity and process reliability. Contact Metav Werkzeuge for tailored cutting-data sheets, application advice and availability for the Tungaloy TNGG160408 SH725 insert Technical data Article number: 6737225 Manufacturer SKU: TUN6737225 Manufacturer: Tungaloy Model series: AddMultiTurn Application: turning Facts Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 16 mm Included angle: 60° Free angle: 0° Special features Coating: SH725 Material: coated cemented carbide Insert form: triangular Chipbreaker: double-sided Hole: with cylindrical hole System: multidirectional turning insert (AddMultiTurn) FAQ What machining tasks is this insert designed for? The TNGG160408 SH725 insert from Tungaloy is designed for longitudinal turning, facing and profiling in multidirectional tool applications where stable edge behaviour is required. How does the SH725 coating affect performance? The SH725 coating on the carbide substrate improves edge stability and wear resistance under changing engagement conditions, giving the TNGG160408 SH725 predictable tool life and consistent surface finish. Is the insert reversible or single-use per side? The insert features a double-sided design and a chipbreaker that permit indexing to a fresh cutting edge, enabling economical use of both faces where the holder and clamping allow. Which holder types are compatible with this geometry? The insert fits holders and clamping systems built for the TNGG geometry and for the AddMultiTurn multidirectional system; compatibility depends on the holder design and clamping method. What are the key dimensional values to check when specifying an insert? Important values for the TNGG160408 SH725 include the 16 mm insert size, 4.76 mm thickness, 0.8 mm corner radius and the 60° included angle to ensure correct seating and toolpath planning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 SH725 Wendeplatten - Tungaloy
Benefit from the combination of SH725 coated carbide toughness, a 60° cutting geometry and a 0.8 mm nose radius to reduce tool changes and maintain process stability. Order the TNGG160408 SH725 insert directly via Metav Werkzeuge or ask our consultants if needed. TNGG 160408 SH725 Tungaloy triangular insert for turning A TNGG160408 SH725 triangular indexable insert designed for multi-directional turning, suitable for longitudinal, facing and profile operations with dedicated multi-directional holders. Triangular 16 mm insert, 60° cutting angle Coated carbide grade SH725 for stable edges 0.8 mm nose radius for versatile profiles Double-sided chipbreaker, cylindrical hole Multi-directional turning made more efficient The AddMultiTurn system enables multi-directional turning with a single cutting geometry, so fewer toolsetups are required and machining cycles become more predictable. This triangular indexable insert is intended for turning operations — longitudinal, facing and profiling — and is optimised for holders that support multiple approach directions. The design reduces cycle interruptions and supports higher machine utilisation by simplifying tool inventory and changeovers, which is particularly beneficial in mixed-batch and flexible production environments. Coating and substrate that ensure edge stability The SH725 coating on a carbide substrate has been formulated for edge stability and toughness, making it suitable for inserts used in smaller toolholders or where engagement conditions vary. The grade offers resistance to chipping under intermittent cuts while still providing acceptable wear life in continuous cuts. For engineers and buyers who prioritise consistent performance under fluctuating loads, the coated substrate gives a reliable balance between durability and cutting-edge integrity. Geometry that balances precision and robustness With a 60° cutting angle and a 0.8 mm nose radius, the geometry supports accurate profile reproduction while tolerating minor deflection and tool runout. The 16 mm size and 4.76 mm thickness deliver the rigidity needed for stable cutting, and the double-sided chipbreaker helps control chip flow and surface finish. Explaining the terms: a larger nose radius improves surface quality and strength at the cutting point, while the chipbreaker shape governs chip formation to prevent entanglement and protect the workpiece surface. Practical handling and system compatibility The insert is supplied with a cylindrical hole, facilitating secure clamping and straightforward seating in compatible holders. The triangular form provides three indexing positions per side where applicable, extending usable life between index operations. As part of a system composed of holder, replaceable inserts and a clamping mechanism, the component integrates into conventional turning toolholders designed for multi-directional machining, which helps to streamline tool management and reduce downtime. Contact Metav Werkzeuge for tailored advice on fixture compatibility and to secure original Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6737222 Manufacturer SKU: TUN6737222 Label: TNGG160408 SH725 Tungaloy-Wendeplatte Facts Size: 16 mm Thickness: 4.76 mm Nose radius: 0.8 mm Cutting angle: 60° Special features Coating: SH725 Material: carbide Shape: triangular Chipbreaker: double-sided Hole: cylindrical Series: AddMultiTurn Application: turning FAQ Which operations is this insert suitable for? The TNGG160408 SH725 insert is designed for turning operations including longitudinal turning, facing and profiling when used in multi-directional holders. What are the key geometry features to consider? This triangular insert has a 60° cutting angle and a 0.8 mm nose radius; these values help balance surface finish quality and cutting robustness during profiling and general turning. How does the SH725 grade perform under variable engagement? The SH725 coated carbide provides enhanced edge stability and toughness, making the insert resilient to intermittent cuts and changing engagement conditions common in flexible production. Is the insert reversible or indexable? The triangular form and double-sided chipbreaker permit indexing; the design allows multiple cutting positions to extend effective life before replacement. What clamping arrangement is required? The insert is supplied with a cylindrical hole for secure clamping in compatible multi-directional holders; ensure holder compatibility with the AddMultiTurn system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of universal TH10 grade, a multidirectional turning system and a sharp uncoated carbide cutting edge for reliable, low-force machining and consistent surface quality. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TNGG 160408 TH10 Tungaloy turning insert — triangular insert for turning, 60° the TNGG 160408 TH10 turning insert is a triangular indexable insert designed for multidirectional turning in the AddMultiTurn system Multidirectional AddMultiTurn system Uncoated carbide for low cutting forces Triangular insert with cylindrical hole Double-sided chipbreaker for clean finish Multidirectional productivity with fewer tool changes The AddMultiTurn system enables machining in several directions with a single toolholder, reducing set-up time and increasing throughput. The combination of a triangular geometry and a 60° cutting angle delivers stable cutting engagement across longitudinal, facing and profile turning operations. As a result, process flow is simplified and cycle times are shortened while retaining repeatable positioning and consistent chip control. This design supports flexible shop workflows and fewer insert changes during complex part programmes, which benefits batch and mixed-production environments. Sharp uncoated grade for low cutting forces and tidy surfaces The TH10 grade is an uncoated carbide formulation optimised as a sharp, universal grade for non-ferrous materials and applications where a clean cutting edge reduces cutting forces. A sharp edge lowers power draw and can improve surface finish when machining softer alloys and non-iron materials. The uncoated nature of the grade reduces adhesion risks on certain workpiece materials, helping to avoid built-up edge and maintain dimensional stability during extended cuts. This supports reliable part quality with straightforward cutting-parameter tuning. Practical handling and secure clamping for stable results The insert is double-sided with a 0.8 mm corner radius and a cylindrical hole for positive locating and secure clamping in standard holders. A double-sided chipbreaker aids consistent chip formation and evacuation to reduce the risk of entanglement and promote a controlled finish. Plate thickness of 4.76 mm and a nominal size of 16 mm ensure sufficient strength for interrupted cuts while remaining compatible with common insert pockets. These characteristics combine to deliver predictable performance in routine turning tasks. Clear application guidance and compatibility Intended primarily for turning, the indexable insert suits longitudinal, facing and profile operations; feed direction and holder style should be matched to the task for optimum results. The triangular format provides three cutting edges per side where applicable, improving economy per insert. When integrated in the AddMultiTurn system, the insert supports multidirectional toolpaths with straightforward tool-change logic, making it a practical choice for workshops aiming to streamline tooling inventory and improve machine availability. Contact Metav Werkzeuge today for availability, technical matching and application advice for Tungaloy inserts — Metav Werkzeuge can advise on holders and parameter settings and is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6808202 Manufacturer SKU: TUN6808202 SKU: 6808202-Tungaloy Designation: TNGG160408 Model series: AddMultiTurn Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 16 mm Cutting angle: 60° Rake/free angle: 0° ISO designation: 160408 Special features Material: carbide Grade: TH10 (uncoated) Plate form: triangular Hole: with cylindrical hole Chipbreaker: double-sided Typical use: turning (longitudinal, facing, profiling) System build: holder, indexable inserts and clamping system FAQ What materials is this insert best suited for? The TH10 grade on the TNGG 160408 insert is optimised for non-ferrous materials and applications where a sharp, uncoated edge gives low cutting forces and improved surface quality. Can the insert be used for profile turning and facing on the same toolholder? Yes. The triangular geometry and the AddMultiTurn system enable multidirectional turning, allowing profile, facing and longitudinal operations with the same holder arrangement. How many cutting edges are available per insert? The triangular, double-sided design provides multiple active edges; the exact number depends on turning strategy and whether both sides are indexed during reconditioning. What edge preparation is available for this insert? This item is supplied in the sharp, uncoated TH10 specification as an uncoated carbide edge designed to reduce cutting forces and avoid material adhesion on non-ferrous alloys. Which clamping and hole style does the insert use? The insert features a cylindrical hole for positive locating and is intended for secure clamping in compatible holders within the AddMultiTurn system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of sharp TH10 uncoated carbide, multidirectional AddMultiTurn compatibility and a compact triangular geometry for reliable, low-force turning of non-ferrous components; order the insert directly via Metav Werkzeuge or ask our consultants for cutting-data recommendations. TNGG160408 TH10 turning insert – AddMultiTurn multidirectional turning system, Tungaloy The TNGG160408 TH10 is a triangular, indexable turning insert designed for multidirectional turning applications such as longitudinal turning, facing and profiling in non-ferrous materials and similar low-force tasks Multidirectional turning compatibility Sharp TH10 uncoated carbide grade Double-sided chipbreaker design Triangular 16 mm indexable insert Consistent production through multidirectional turning The AddMultiTurn series is engineered for multidirectional turning, allowing several machining directions to be served with a single tool body and one insert geometry. This approach reduces tool changes and set-up time, promoting a smoother production flow and higher machine uptime. The combination of the TH10 uncoated carbide grade and a double-sided chipbreaker supports low cutting forces and clean surface finish, which is advantageous when machining aluminium and other non-ferrous alloys. The result is a measurable increase in process efficiency and predictable part quality. Geometry and grade that balance strength and finish Geometry determines both durability and the quality of the machined surface: the triangular 16 mm format with a 0.8 mm corner radius and a 60° cutting angle offers a robust edge for profile and facing operations while maintaining accessibility in confined toolpaths. The insert is uncoated carbide, designed as a sharp universal grade for non-ferrous work where a clean edge produces minimal burr and reduced built-up edge. The presence of a cylindrical hole and a 4.76 mm plate thickness ensures secure clamping in compatible holders and consistent repeatability during indexation. Practical applications and workshop benefits This indexable insert suits CNC turning shops and production environments where flexibility and repeatability are required. Typical uses include longitudinal turning, facing and profiling of aluminium, brass and other non-ferrous materials; the grade and chipbreaker minimise cutting forces and extend cycle stability. As an indexable component, the insert enables rapid edge changes and minimal downtime; combined with the AddMultiTurn system it supports compact tool assemblies and reduced inventory complexity. For customers seeking process reliability, the insert provides a predictable machining result and simplified tool management. Contact Metav Werkzeuge for tailored cutting data and to request the TUN6808216 SKU for compatible holders and clamping systems Technical data Article number: 6808216 Manufacturer SKU: TUN6808216 Product SKU: 6808216-Tungaloy Designation: TNGG160408 TH10 Tungaloy insert Model series: AddMultiTurn Manufacturer: Tungaloy Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 60° Relief angle: 0° Hole: cylindrical Double-sided: yes Plate form: triangular Special features Grade: TH10 (uncoated carbide) Application: Turning (longitudinal, facing, profiling) Chipbreaker: double-sided System compatibility: AddMultiTurn multidirectional turning With hole: cylindrical for secure clamping Sharp universal grade for non-ferrous materials FAQ What materials is this insert best suited for? The TNGG160408 TH10 insert is optimised for non-ferrous materials such as aluminium and brass; the TH10 uncoated carbide grade supports low cutting forces and clean finishes when machining these alloys. Which operations can be performed with this insert? Typical operations include longitudinal turning, facing and profiling; the AddMultiTurn concept allows the insert to be used effectively in multiple machining directions. What are the key geometric values to consider? The insert has a 16 mm size, 0.8 mm corner radius and 60° cutting angle, with a plate thickness of 4.76 mm, which together determine edge strength and surface finish potential. How is the insert secured in the holder? The triangular insert features a cylindrical hole for positive location and clamping; it is intended for use with holders and clamps compatible with the AddMultiTurn system. Is the grade coated or uncoated and why does that matter? The TH10 grade is an uncoated carbide chosen for applications where a sharp cutting edge and low cutting forces deliver superior surface quality on non-ferrous materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 TH10 Wendeplatten - Tungaloy
Benefit from the combination of a multidirectional turning system, a sharp TH10 uncoated carbide grade for low cutting forces, and a precise 0.8 mm corner radius that supports clean surface finishes; order the insert directly via Metav Werkzeuge or consult our specialists for tailored application advice. TNGG 160408 TH10 indexable insert for Turning — Tungaloy The TNGG 160408 TH10 is a triangular indexable insert developed for multidirectional turning in longitudinal, facing and profiling operations within the AddMultiTurn system. Multidirectional turning capability Sharp TH10 uncoated carbide grade Double-sided chipbreaker for clean swarf Triangular 16 mm insert with cylindrical hole Maximise productivity with a single multidirectional solution The AddMultiTurn series integrates holder, inserts and clamping into a single concept that enables several cutting directions with one tool, reducing changeover time and simplifying tool inventories. The AddMultiTurn design helps maintain stable chip control across longitudinal, facing and profiling passes, so machining cycles become more predictable and downtime is minimised. As an indexable insert, this component supports quick seat replacement and repeatable positioning, promoting consistent part quality across batches. Low cutting forces and improved surface quality for non-ferrous work The uncoated TH10 grade is formulated as a sharp universal carbide suitable for non-ferrous materials and situations where a clean finish and reduced cutting force are priorities. The sharp edge geometry, together with the double-sided chipbreaker, reduces built-up edge and helps evacuate swarf reliably, which contributes to improved surface integrity and fewer rework operations. This combination is particularly effective where fine finishes are required without resorting to aggressive coatings that might alter edge behaviour. Precision geometry for secure clamping and repeatable results A triangular 16 mm format with a 60° included angle and a 0.8 mm corner radius provides an effective balance between edge strength and detail in the turned profile. The insert thickness and the cylindrical centre hole allow secure clamping in compatible holders, ensuring accurate seat repeatability in the AddMultiTurn system. Manufactured from cemented carbide, the insert is designed to deliver steady performance under typical turning feeds and speeds for its intended applications, supporting reliable process outcomes and predictable tool life. Contact Metav Werkzeuge today to discuss Tungaloy TH10 inserts for optimised multidirectional turning and to confirm the best holder and cutting data for the production task; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6808209 SKU: 6808209-Tungaloy Manufacturer SKU: TUN6808209 Manufacturer: Tungaloy Model series: AddMultiTurn Category: Indexable inserts Core dimensions Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Angle: 60° Clearance angle: 0° Hole: cylindrical hole Special features Triangular insert Double-sided chipbreaker Uncoated carbide grade TH10 Multidirectional turning system compatibility Intended use: Turning FAQ What applications suit this triangular insert best? The TNGG 160408 TH10 insert is intended for multidirectional turning including longitudinal, facing and profiling within the AddMultiTurn system. Is the cutting grade suitable for aluminium and other non-ferrous materials? Yes, the TH10 uncoated carbide is a sharp universal grade optimised for non-ferrous materials and applications that benefit from lower cutting forces and cleaner surfaces. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker on this triangular insert promotes consistent chip formation and evacuation, reducing the risk of snarled swarf and supporting improved surface finish on turned parts. What guarantees secure clamping and repeatability? The combination of a cylindrical centre hole, defined insert thickness and the triangular geometry ensures secure clamping and repeatable seating in compatible holders within the AddMultiTurn system. Which item numbers identify this product? This product is available as TNGG 160408 TH10 with article number 6808209 and manufacturer SKU TUN6808209. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of the TH10 uncoated carbide grade and the multidirectional AddMultiTurn system for fewer tool changes and more consistent cycle times; order directly via Metav Werkzeuge or contact our consultants for application support. TNGG 160408 TH10 indexable turning insert for turning — Tungaloy TNGG160408 TH10 is a triangular, double-sided indexable insert designed for multidirectional turning in longitudinal, facing and profiling operations. Multidirectional turning system Uncoated carbide TH10 grade Triangular insert, 60° cutting angle Double-sided chipbreaker, low cutting forces Reduce tool changes with a multidirectional system The AddMultiTurn concept enables a single tool to cover several cutting directions, which reduces the number of tool assemblies required on the turret and shortens idle time between operations. The insert’s triangular geometry and 60° included angle are integrated to support longitudinal, facing and profiling tasks, while the system structure—comprising holder, indexable inserts and a clamping system—is designed to provide stable support during direction changes. This arrangement helps to improve throughput without sacrificing process reliability. Cleaner surfaces and lower cutting forces for non‑ferrous components The TH10 grade is an uncoated carbide formulated as a sharp, universal grade for non‑ferrous materials, where a finely honed cutting edge reduces built‑up edge and cutting resistance. The combination of a sharp edge and the double‑sided chipbreaker leads to low cutting forces and a clean surface finish, making the insert well suited for applications that require tight surface quality and minimal secondary finishing. Cutting behaviour is predictable thanks to the grade’s focus on stable chip formation. Precise geometry and secure clamping for repeatable results Key geometry features such as the 0.8 mm corner radius and a 4.76 mm plate thickness contribute to predictable tool life and dimensional consistency. The insert is supplied with a cylindrical hole for positive location and robust clamping; this design supports repeatable positioning in the toolholder and reduces the risk of micro‑movement under load. A 0° relief angle is matched to the insert form to provide the desired cutting engagement for the intended turning tasks. Cost‑effective performance and straightforward integration The double‑sided design and triangular shape translate into multiple usable cutting edges per insert, improving cost efficiency per edge compared with single‑edged options. The AddMultiTurn series is configured to integrate easily into existing turning programmes, and the combination of TH10 carbide and the double‑sided chipbreaker reduces the need for extensive process tuning. For workshops seeking a balance of productivity and surface quality in non‑ferrous turning, this insert delivers a practical compromise between sharpness and mechanical robustness. Speak with Metav Werkzeuge for tailored advice on using Tungaloy TH10 inserts in multidirectional turning; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for technical guidance and availability Technical data Article number: 6808224 SKU: 6808224-Tungaloy Manufacturer SKU: TUN6808224 Label: TNGG160408 TH10 Tungaloy-Wendeplatte Model series: AddMultiTurn Facts Corner radius: 0.8 mm Cutting angle: 60° Plate size: 16 mm Plate thickness: 4.76 mm Relief angle: 0° Design & special features Shape: triangular Hole: with cylindrical hole Material: carbide (uncoated) Grade: TH10 Chipbreaker: double-sided System build: holder, indexable inserts and clamping system Typical applications: longitudinal, facing and profiling FAQ What materials is this insert intended for? The insert is designed for non‑ferrous materials; the TH10 uncoated carbide grade supports low cutting forces and reliable chip formation in such applications. How does the AddMultiTurn system reduce setup time? The AddMultiTurn concept allows one tooling assembly to perform multiple cutting directions, so fewer holders are required and changeovers are reduced. How is the insert clamped and located? The TNGG160408 TH10 insert is supplied with a cylindrical hole for positive location and secure clamping in compatible toolholders. What advantages does the triangular, double‑sided design offer? A triangular, double‑sided insert provides multiple usable cutting edges, improving cost per edge and enabling economical index changes without full insert replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160408 X407 Wendeplatten - Tungaloy
TNGG160408 X407 Tungaloy-Wendeplatte zum Drehen Die TNGG160408 X407 Tungaloy-Wendeplatte für Multidirektionales Drehsystem bietet robuste Schnittstabilität und effiziente Spanbildung für Längs-, Plan- und Profildrehen Dreieckige Plattenform 16 mm für vielseitige Einsetzbarkeit Hohe Schneidkantenstabilität durch Sorte X407 Doppelseitiger Spanbrecher für sichere Spanführung Mit zylindrischem Loch zur einfachen Spannermontage Eckenradius 0,8 mm und 60° Schneidwinkel für präzise Konturen Präzision und Werkstoffkompetenz für produktive Zerspanung Die Wendeplatte verbindet Hartmetall-Tragfähigkeit mit der Tungaloy-Schneidstoffsorte X407, was zu einer ausgewogenen Mischung aus Verschleißfestigkeit und Zähigkeit führt. Diese Materialkombination reduziert Werkzeugwechsel und verbessert die Standzeit, wodurch Produktionsabläufe stabiler werden. Die Integration in das AddMultiTurn-System ermöglicht eine einfache Indexierung und minimiert Rüstzeiten bei Multidirektionalem Drehen. Geometrie und Prozessvorteile für anspruchsvolle Bearbeitungen Die dreieckige Plattenform mit Plattengröße 16 mm, Eckenradius 0,8 mm und Schneidwinkel 60° sorgt für reproduzierbare Konturen und hohe Formstabilität. Der doppelseitige Spanbrecher optimiert die Span partikel und verhindert Stauungen, während das zylindrische Loch eine sichere Befestigung im Halter gewährleistet. Ergebnis sind gleichmäßige Oberflächen und reduzierte Nacharbeit bei Serienfertigung. Wirtschaftlichkeit, Flexibilität und Einsatzbereich Die Kombination aus stabiler Schneidkante, verschleißfestem Hartmetall und der Sorteneigenschaft X407 macht die Platte zu einer wirtschaftlichen Wahl für Mehrschichtigen Einsatz in der Drehfertigung. Fertigungen profitieren von konstanter Leistung, planbaren Wechselintervallen und geringer Stillstandszeit. Bei Unklarheiten zur Anwendung oder Schnittdaten bietet Metav Werkzeuge technische Beratung an. Bestellen Sie die TNGG160408 X407 Tungaloy-Wendeplatte direkt bei Metav Werkzeuge oder kontaktieren Sie uns für anwendungsspezifische Empfehlungen unter info@metav-werkzeuge.com / +49 2822 7131930 Produktmerkmale Artikelnummer: 6808220 Marke: Tungaloy Modellserie: AddMultiTurn SKU: TUN6808220 Daten Eckenradius: 0,8 mm Schneidwinkel: 60° Plattendicke: 4,76 mm Plattengröße: 16 mm Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: X407 (Schneidstoffsorte, verschleißfest / zäh) Schneidstofftyp: Tungaloy-Schneidstoffsorte Plattenform: dreieckig Spanbrecher: doppelseitig Loch: mit Loch Lochstil: zylindrisches Loch Anwendung: Drehen Systemaufbau: Halter, Wechselplatten und Klemmsystem Modellserie-Einsatz: Multidirektionales Drehsystem für mehrere Bearbeitungsrichtungen mit einem Werkzeug FAQ Für welche Dreharbeiten eignet sich die Platte besonders? Die TNGG160408 X407 Tungaloy-Wendeplatte ist speziell für Längs-, Plan- und Profildrehen ausgelegt und passt in das AddMultiTurn-System für Multidirektionales Drehen. Wie wird die Platte im Halter befestigt? Die Platte verfügt über ein zylindrisches Loch zur Befestigung, was einfache Montage und sichere Spannkraft im passenden Halter gewährleistet. Welche Vorteile bietet die Sorte X407? Die Sorte X407 kombiniert Verschleißfestigkeit mit Zähigkeit, was zu stabiler Schneidkante und guter Standzeit bei wechselnden Schnittbedingungen führt. Ist die Platte für Serienfertigung geeignet? Ja, die Kombination aus geometrischer Stabilität und verschleißfestem Hartmetall macht die Platte wirtschaftlich geeignet für Serienfertigung mit wiederholgenauer Performance. Welche Besonderheiten bietet das AddMultiTurn-System? Das AddMultiTurn-System ermöglicht Multidirektionales Drehen mit einem Werkzeug, reduziert Rüstzeiten und erlaubt vielseitige Bearbeitungsrichtungen ohne häufige Werkzeugwechsel. für de-DE: Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNGG 160408 X407 Wendeplatten - Tungaloy
Benefit from the combination of wear-resistant carbide, proven chip control and a multidirectional design that reduces index changes and keeps production running smoothly. The triangular Tungaloy insert delivers stable cutting edges and secure clamping for a dependable turning process. Order directly via Metav Werkzeuge or request expert advice from our consultants for an optimised tool set-up. TNGG160408 X407 Tungaloy indexable insert — triangular 60° for multidirectional turning The TNGG160408 X407 indexable insert is a triangular, double-sided carbide insert designed for multidirectional turning applications, suitable for longitudinal, facing and profiling operations within an AddMultiTurn system. Triangular insert, 60° cutting geometry Tungaloy grade X407 for wear resistance Double-sided chipbreaker for reliable chips Central cylindrical hole for secure clamping Higher productivity through multidirectional turning and fewer tool changes The AddMultiTurn concept combines holder, inserts and clamping to enable a multidirectional turning approach that reduces the need to change tools when workpiece geometry varies. Manufactured from carbide and specified with the X407 grade, the insert offers a balanced mix of wear resistance and toughness, which translates into longer intervals between index changes and fewer interruptions to production. The triangular 60° geometry provides positive engagement for many turning profiles, helping to maintain stable cutting forces and consistent results. Predictable chip formation and improved surface quality A double-sided chipbreaker on this insert is engineered to deliver controllable chips across a range of feeds and depths of cut; this lowers the risk of entanglement and aids swarf evacuation in multifaceted turning operations. With a 0.8 mm corner radius and a 60° cutting angle, the insert supports steady cutting-edge behaviour that contributes to repeatable surface finish and reduced rework. These properties are especially valuable in serial machining where reproducibility and throughput are priorities. Robust clamping and system-level advantages for workshop workflows The insert’s central cylindrical hole and 4.76 mm thickness ensure secure clamping in compatible holders, providing mechanical stability during aggressive cuts or direction changes. As part of the AddMultiTurn system series, the solution is intended to work as a system — holder, indexable inserts and clamping — which simplifies tool inventory and shortens set-up time. For shops seeking practical, application-oriented tooling, this combination supports efficient machining sequences for a range of turning tasks. For application advice, cutting-data recommendations and ordering of Tungaloy turning inserts, contact Metav Werkzeuge — Metav Werkzeuge offers technical consultation and supply support to integrate Tungaloy inserts into existing turning systems (info@metav-werkzeuge.com, +49 2822 7131930) Technical Data Manufacturer article number: 6808205 SKU: 6808205-Tungaloy SKU manufacturer: TUN6808205 Brand: Tungaloy Model series: AddMultiTurn Material: Carbide Designation: TNGG160408 X407 Facts Cutting angle: 60° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 16 mm Free angle: 0° Special features Triangular plate form Double-sided chipbreaker Central cylindrical hole With hole for clamping Tungaloy cutting grade X407 Multidirectional turning system Typical applications: longitudinal turning, facing, profiling System components: holder, indexable inserts, clamping system FAQ What is the primary application of the TNGG160408 X407 insert? The TNGG160408 X407 indexable insert is designed for multidirectional turning within an AddMultiTurn system, covering longitudinal, facing and profiling operations. How does the double-sided chipbreaker benefit machining? The double-sided chipbreaker on the TNGG160408 X407 promotes consistent chip formation and safer swarf control, which supports stable cutting and easier machine-side handling. What are the critical dimensions to check for holder compatibility? Check the 16 mm plate size, 4.76 mm plate thickness and the central cylindrical hole dimensions; these determine mechanical fit and clamping stability for the TNGG160408 X407 insert. What does the X407 grade signify for tool life? The X407 grade for this Tungaloy insert is specified to provide a balance of wear resistance and toughness, contributing to longer service life and reliable edge stability under varied turning conditions. Which article number or SKU should be used when ordering? Order using the manufacturer article number 6808205 or SKU 6808205-Tungaloy for the TNGG160408 X407 insert to ensure the correct item is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160412 GT720 Wendeplatten - Tungaloy
Take advantage of the GT720 cermet grade together with the 1.2 mm corner radius and 60° triangular geometry for consistent surface quality and predictable wear behaviour; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. TNGG160412 GT720 Tungaloy — ISO indexable turning insert, 60° triangle TNGG160412 is an ISO-standard triangular insert for turning, engineered for finishing to light machining of steel and optimised for high surface quality using the GT720 cermet grade. ISO triangular 60° insert GT720 cermet for fine finishing 1.2 mm corner radius for precision Double-sided insert with cylindrical hole Consistent finishing and long-lasting edge quality The combination of the GT720 cermet grade and the triangular 60° geometry delivers a reliable balance between surface finish and dimensional accuracy. Cermet, a ceramic‑metal composite, provides a fine, wear‑resistant cutting edge that is particularly suitable for finishing operations on steel, where consistent flank wear and repeatable tolerances matter. The result is a predictable machining outcome with reduced need for repeated finishing passes, supporting stable process windows and predictable tool-change planning. Secure seating and straightforward indexing for efficient set-up Designed as an ISO indexable plate with a cylindrical hole and standard retention features, this triangular insert ensures secure clamping in compatible holders. The double-sided design doubles the number of usable edges per insert, while the 4.76 mm thickness and 1.2 mm corner radius provide mechanical strength under light to moderate cutting loads. Compatibility with ISO holders is determined by form, clearance angle, tolerance class and size; matching these parameters enables quick tool changes and reproducible tool offsets, reducing set-up time on the shop floor. Process robustness across common turning tasks Intended for external and internal turning, the insert performs best in finishing to light machining of steel when paired with the appropriate chipbreaker and cutting conditions. The double-sided chipbreaker and the GT720 composition promote stable chip formation and even wear, which supports higher component quality and fewer interruptions. When combined with a properly matched holder and cutting data, the insert contributes to productive machining cycles and consistent part quality, aligning with modern requirements for process security and throughput. For application advice, holder compatibility checks or to place an order for the Tungaloy GT720 insert, contact Metav Werkzeuge—Metav Werkzeuge can assist with selection and delivery to minimise machining risk Technical Data Article number: 6849249 Manufacturer SKU: TUN6849249 SKU: 6849249-Tungaloy Model series: ISO indexable turning inserts WPL designation: TNGG160412 Facts Corner radius: 1.2 mm Thickness: 4.76 mm Insert size: 16 mm Angle: 60° Clearance (free) angle: 0° Special features Grade / coating: GT720 Cutting material: cermet (coated cermet variant indicated) Material base: cemented carbide substrate Shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What machining tasks is this insert best suited for? The TNGG160412 GT720 Tungaloy insert is optimised for finishing to light machining of steel, prioritising surface quality and dimensional stability. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the plate conforms to ISO indexable turning insert dimensions for standard triangular holders. How does the GT720 cermet grade affect performance? GT720 cermet offers a fine, wear‑resistant edge that improves surface finish and promotes uniform flank wear during finishing operations on steel. Can the insert be indexed to use multiple edges? Yes, the triangular shape and double‑sided design allow indexing to additional cutting edges, extending usable life per insert. What features support secure clamping and repeatability? The cylindrical hole and standard ISO geometry, together with the 4.76 mm thickness and tolerance compatibility, provide mechanical stability and reproducible positioning in suitable holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 160412 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp uncoated cermet cutting edge and low cutting forces for consistently high surface quality; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific selection. TNGG 160412 NS9530 — TNGG160412 NS9530 ISO turning insert for turning, uncoated cermet finishing (Tungaloy) A TNGG160412 NS9530 ISO turning insert intended for finishing operations on steel, offering a sharp cutting edge, a 1.2 mm nose radius and a 60° triangular form for reliable external and internal turning. Uncoated cermet NS9530 for superior finish 60° triangular form, 1.2 mm nose radius Double-sided chipbreaker, cylindrical hole Compatible with ISO turning holders Achieve consistent finishing with a cermet cutting edge The uncoated cermet grade NS9530 is designed specifically for finishing steel where a sharp cutting edge and low cutting forces are required. Cermet combines ceramic and metallic properties to deliver a hard cutting surface that resists abrasion while still providing toughness; this results in improved surface finish and reduced tendency for built-up edge during continuous cutting. The 1.2 mm nose radius supports thin depth-of-cut applications and helps maintain dimensional accuracy on turned components. Reliable fit and interchangeability within ISO systems As an ISO‑standardised insert, the geometry and tolerances determine compatibility with clamping systems. The triangular 60° form paired with a cylindrical hole and a specified clearance angle ensures stable seating in the corresponding holder and repeatable positioning. The double-sided chipbreaker allows indexing of the insert to a fresh cutting edge, extending effective tool life and simplifying inventory management when a precise, standardised interface is required. Optimised for continuous cuts and small feed finishing This finishing grade is intended for continuous cuts and small depths of cut, where cutting forces must remain low to protect part integrity and tool life. The combination of a cermet edge and a finely honed geometry reduces vibration and produces predictable chip formation with the specified double-sided chipbreaker. The result is fewer rework cycles and more efficient throughput for components requiring tight surface tolerance and high-quality finishes. Practical handling and process guidance for shop floors Indexable application is straightforward: the triangular insert provides three usable cutting edges per side and simple rotation once an edge is worn. The mounting relies on standard clamping with a central hole and appropriate screws; selection of the matching clamp and shank is essential for process stability. For material selection and process parameters, the technical team at Metav Werkzeuge can advise on matching grade NS9530 and chipbreaker choice to the specific steel grade and machining conditions. Contact Metav Werkzeuge for technical advice on Tungaloy finishing inserts and availability — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6997825 Manufacturer item name: TNGG160412 NS9530 Tungaloy-Wendeplatte SKU: 6997825-Tungaloy Manufacturer SKU: TUN6997825 Core technical data Insert size: 16 mm Thickness: 4.76 mm Nose radius: 1.2 mm Included angle: 60° Clearance angle: 0° Special features Uncoated cermet grade NS9530 Double-sided chipbreaker Triangular 3-edge insert Cylindrical hole for clamping Application: turning ISO-compatible insert series FAQ What materials is this insert suitable for? The TNGG160412 NS9530 is specified as a finishing grade for steel; the uncoated cermet composition is optimised for continuous cuts on steel where a high surface finish is required. How does the chipbreaker affect performance? The double-sided chipbreaker on the TNGG160412 encourages predictable chip formation during finishing operations, helping to maintain low cutting forces and consistent surface quality. How many edges are available per insert? With a triangular 60° form, the insert offers three indexed cutting edges per side; combined with double-sided geometry this maximises usable edges before replacement. Is this insert compatible with standard ISO holders? Yes — the insert conforms to ISO dimensions; compatibility is determined by form, clearance angle, tolerance class, clamping style, size and thickness and should be matched to the corresponding holder. What are the practical benefits of using grade NS9530? Grade NS9530 provides a sharp edge geometry and improved surface finish in finishing applications, reducing rework and enabling stable performance in continuous small‑cut operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 220404 NS9530 Wendeplatten - Tungaloy
High-precision finishing of steel parts benefits from the NS9530 uncoated cermet grade and a fine 0.4 mm corner radius, which together deliver low cutting forces and consistently superior surface quality; order the insert directly via Metav Werkzeuge or consult our advisors for suitability and delivery. TNGG220404 NS9530 Tungaloy turning insert — ISO triangular, 60° geometry The TNGG220404 NS9530 is an ISO triangular turning insert designed for finishing operations in external and internal turning, providing a fine cutting edge and predictable results. ISO triangular insert, 60° cutting geometry NS9530 uncoated cermet finishing grade 0.4 mm corner radius for fine surface finish Double-sided chipbreaker with cylindrical hole Precise finishing for steel with predictable results The insert is furnished in the NS9530 uncoated cermet grade, a finishing specification engineered for low-friction cutting and low cutting forces, which reduces tool-induced vibration and helps achieve a superior surface finish on steel components. The 0.4 mm corner radius supports stable, small-depth cuts and is particularly effective in continuous cutting conditions, where the sharp edge and cermet wear characteristics preserve dimensional accuracy. This combination translates into fewer rework cycles and more predictable part quality in batch production. ISO compatibility for reliable tool set-up Built to the ISO plate family and supplied as a triangular insert with a 60° main cutting geometry, the design ensures repeatable clamping and simple matching to corresponding holders. The plate has a nominal size of 22 mm and a plate thickness of 4.76 mm, and it is supplied with a cylindrical hole for secure fixing. Compatibility with a toolholder is governed by form, relief angle, tolerance class, fastening method, size and thickness; adherence to ISO norms simplifies tool inventory management and reduces set-up time on the shop floor. Productivity and handling advantages in finishing operations The double-sided chipbreaker offers reliable chip control across the profile while maximising the number of usable edges through indexing; this indexable insert format lowers per-edge cost and minimises downtime for changes. Suited to both external and internal turning, the grade performs best in finishing passes with small feed and depth parameters, where the sharp cutting edge and cermet microstructure produce consistently fine results. In short runs or high-mix environments, the insert’s predictable wear behaviour supports stable cycle times and repeatable surface quality. For precision finishing applications, specify the Tungaloy NS9530 finishing insert via Metav Werkzeuge and request technical advice or stock information from info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6997843 Manufacturer SKU: TUN6997843 SKU: 6997843-Tungaloy Facts ISO designation: 220404 Geometry: 60° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 22 mm Special features Grade: NS9530 Cutting material type: uncoated cermet Plate form: triangular Chipbreaker: double-sided Hole: with cylindrical hole Typical application: turning Model series: ISO turning indexable inserts FAQ What materials is this insert best suited for? The TNGG220404 NS9530 insert is a finishing grade optimised for steel; the uncoated cermet composition is selected to produce low cutting forces and fine surface finishes on continuous turning passes. Is this insert compatible with standard ISO triangular holders? Yes, the plate follows ISO geometry (220404) and its compatibility depends on matching form, relief angle, tolerance class, fastening method, size and thickness to the holder. How many usable edges are available before regrinding or replacement? The triangular, double-sided format allows multiple indexings; actual edge count per insert depends on the holder set-up and whether both sides are utilised. Does the insert have a chipbreaker and how does it affect performance? The insert features a double-sided chipbreaker designed to improve chip control during finishing, supporting stable cutting and consistent surface quality. Can this insert be used for internal turning as well as external turning? Yes, the design and grade are suitable for both external and internal turning operations, particularly in finishing passes with small depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 220404 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and efficient chip control provided by the NS9530 uncoated cermet grade; order the insert directly via Metav Werkzeuge or consult the technical advisors for process-matched recommendations. TNGG 220404 NS9530 – Triangular turning insert (ISO 220404) by Tungaloy A TNGG 220404 NS9530 triangular ISO indexable insert for turning, designed for fine finishing of steel with a sharp cutting edge and continuous-cut applications ISO triangular insert TNGG 220404 NS9530 Uncoated cermet for fine finishing Sharp edge for low cutting forces Compatible with standard 22 mm holders High-quality finish and reduced cutting forces for turning The selection of the NS9530 uncoated cermet grade prioritises surface quality and low cutting resistance. As a finishing grade, it delivers a sharp cutting edge that lowers cutting forces and reduces built-up edge formation during continuous cuts, which results in consistently improved surface integrity. This makes the insert particularly suitable for operations where minimal tool-induced distortion and superior part appearance are required. The combination of the grade and geometry supports predictable tool behaviour under light feeds and shallow depths. Geometry and system compatibility for reliable tool clamping The insert is a triangular ISO 220404 type with a 60° included angle and a 0.4 mm corner radius, produced with a cylindrical hole for positive clamping. The plate thickness is 4.76 mm and the nominal size is 22 mm, with a 0° rake angle specified for stable cutting in finishing passes. Compatibility with a toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness; the complete system comprises the ISO insert, a matching external holder or boring bar, a supporting shim/clamping set and replacement screws. These defined interfaces enable secure seating and repeatable indexation, reducing setup time and variation between edges. Application guidance and process benefits Intended for external and internal turning, the insert features a double-sided chipbreaker that helps to control chip flow during steady-state finishes and light cross feeds. In practice, this results in fewer interruptions from long chips and more consistent cycle times in production runs. When paired with a properly selected holder and cutting parameters, the insert contributes to improved tool life and steady part quality. For batch manufacturing or precision components, the predictable performance of this geometry-grade combination supports process stability and a reduced need for in-process adjustments. For dependable finishing performance in turning operations, contact Metav Werkzeuge for tailored advice on integrating TNGG 220404 NS9530 inserts into the toolholding system and process chain; Metav Werkzeuge is ready to assist with specifications and supply. Technical data Article number: 6997842 SKU: 6997842-Tungaloy Manufacturer SKU: TUN6997842 ISO designation: TNGG220404 Model series: ISO-Drehwendeschneidplatten Description: TNGG220404 NS9530 Tungaloy insert Facts Size: 22 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Rake angle: 0° Hole: with cylindrical hole Special features Uncoated cermet cutting material, grade NS9530 Triangular plate, double-sided chipbreaker ISO-standard indexable insert Suitable for external and internal turning System: insert + holder/boring bar + shim/clamping set + screws FAQ What materials is this insert optimised for? The NS9530 uncoated cermet grade is optimised for finishing operations in steel, offering a sharp edge and low cutting forces suitable for continuous cuts. Is the insert compatible with standard ISO holders? Compatibility is based on the insert form, size (22 mm), thickness (4.76 mm), hole style and tolerance; the TNGG220404 designation follows ISO standards for use with matching external holders and boring bars. How many effective cutting edges are available per indexation? As a double-sided triangular insert, the TNGG 220404 design provides multiple usable edges per indexation cycle before replacement is necessary. Which applications benefit most from this grade and geometry? Precision finishing tasks with light depths of cut and continuous feeds benefit most, where surface quality and low cutting resistance are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 220404 X407 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a wear‑resistant grade and a compact 4.76 mm plate thickness for consistent, productive turning. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TNGG220404 X407 Tungaloy turning insert — triangular, 60° cutting geometry The TNGG220404 X407 is a triangular ISO turning insert designed for external and internal turning, combining a robust Tungaloy grade with a double‑sided chipbreaker for stable chip control. ISO‑form insert for standard holders Triangular shape, 60° cutting geometry X407 Tungaloy grade for wear resistance Double‑sided chipbreaker, cylindrical hole Reliable process security through ISO conformity and material choice The insert follows the ISO geometry series for indexable turning plates, which simplifies holder selection and ensures predictable performance in series production. Manufactured from cemented carbide, the grade X407 is balanced to deliver a combination of wear resistance and toughness, so tool life remains stable under varied cutting conditions. The standardised form, paired with clearly defined size and thickness, reduces setup uncertainty and supports reproducible machining results in batch and single‑part production. Improved cutting performance and controlled chip formation A double‑sided chipbreaker is integrated into the geometry to promote reliable chip control during both light and medium‑duty turning. The triangular 60° geometry reduces cutting forces in many turning cycles while the 0.4 mm radius helps maintain edge strength where small nose radii are required. Together these features enhance surface integrity and help maintain consistent cycle times, thereby contributing to overall process efficiency and predictable part quality. Practical handling and secure clamping for fast indexation The plate is supplied with a cylindrical hole, permitting secure clamping and quick indexation in compatible holders. At a plate thickness of 4.76 mm and a nominal size of 22, the indexable insert offers sufficient rigidity for stable cutting while remaining easy to replace during tool changes. Compatibility to a specific holder is determined by form, clearance angle, tolerance class, fastening and thickness, so the ISO format supports straightforward integration into established turning tool systems. Choose the right grade and geometry for the application The Tungaloy X407 grade complements the plate geometry by providing the necessary balance between edge stability and wear resistance for general turning tasks. For demanding applications, matching the chipbreaker type and grade to the workpiece material and machining strategy will reduce downtime and improve cost per part. The combination of standard ISO geometry and a modern carbide grade makes this insert suitable for production shops aiming for repeatable, efficient machining with low process variability. For reliable, high‑productivity turning with Tungaloy grade X407, contact Metav Werkzeuge for tailored advice and rapid supply: info@metav-werkzeuge.com • +49 2822 7131930. Technical data Article number: 6808233 Manufacturer SKU: TUN6808233 Material: Cemented carbide Model series: ISO turning indexable inserts Application: Turning Core specifications Size: 22 Plate thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Clearance angle: 0° ISO designation: 220404 Special features Triangular plate form With cylindrical hole Double‑sided chipbreaker Grade: X407 (Tungaloy) Intended for external and internal turning Compatible with ISO‑standard holders FAQ What determines compatibility with a toolholder? Compatibility is defined by the insert form, clearance angle, tolerance class, fastening type, size and thickness; the ISO format used here helps ensure the TNGG220404 X407 fits standard holders designed for this geometry. Which materials is this insert intended for? The X407 grade is developed for general turning applications, offering a balance of wear resistance and toughness suitable for a broad range of steels and common workpiece materials. Is the chipbreaker suitable for continuous turning? The integrated double‑sided chipbreaker is designed to promote controlled chip formation in continuous and interrupted turning; selecting the correct feed and depth of cut tailors performance to the specific operation. How is the insert clamped in the holder? The plate is supplied with a cylindrical hole to enable secure clamping and repeatable positioning in compatible holders that accept the ISO 220404 form. Can the insert be indexed to present a fresh cutting edge? Yes, the geometry and double‑sided design allow for indexing to fresh edges; refer to the holder’s mounting and clamping instructions to ensure correct torque and seating. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNGG 220408 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade uncoated cermet NS9530 that delivers a sharp cutting edge and low cutting forces for consistent high-quality surfaces; combine that with a 60° triangular, double-sided design and a secure cylindrical-clamp hole for reliable indexing and reduced tooling costs. Order the TNGG 220408 NS9530 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNGG 220408 NS9530 Turning Insert – Uncoated Cermet, 60° Triangle (Tungaloy) The TNGG 220408 NS9530 is an ISO-format triangular turning insert engineered for finishing operations in steel, offering a sharp edge and low cutting forces suited to continuous cuts and small depths of cut ISO triangle insert TNGG 220408 Uncoated cermet grade NS9530 Sharp cutting edge for fine finishing Double-sided chipbreaker with centre hole High-quality finishing with reduced cutting forces The combination of an uncoated cermet substrate and the NS9530 grade prioritises edge sharpness and surface integrity, making this insert ideal for finishing passes on steel. Cermet combines ceramic hardness with metallic toughness; in practice, this means a sharp cutting edge that sustains low cutting forces and produces a smoother surface finish, particularly in continuous turning where chatter and edge wear are critical. The result is less rework and a reliable dimension and appearance on each component. Secure indexing and compatibility for stable machining Designed as a 60° triangle with a cylindrical hole and double-sided geometry, the insert offers economical indexing: each side provides multiple usable edges, reducing downtime for tool changes. The ISO-standard format simplifies replacement and toolholder matching, with compatibility determined by shape, clearance angle (0°), tolerance class, mounting method, size and thickness. Features such as the corner radius 0.8 mm and plate thickness 4.76 mm help to balance edge strength and finish when paired with a suitable holder and clamping system. Practical integration into turning workflows Use this insert for external and internal turning where a finishing grade is required; select the double-sided chipbreaker to suit the rigidity of the setup and the intended cut depth. The insert is intended to be combined with a matching ISO external holder or boring bar, plus the appropriate shim/clamp set and replacement screws for secure seating. Specifying NS9530 for finishing operations typically improves process stability and repeatability, supporting higher productivity and consistent part quality across batches. For advice on application parameters and holder selection, technical guidance is available. Contact Metav Werkzeuge for tailored advice on selecting the TNGG 220408 NS9530 turning insert and to discuss holder compatibility or batch supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997845 Manufacturer SKU: TUN6997845 SKU: 6997845-Tungaloy Insert designation: TNGG220408 Model series: ISO-Drehwendeschneidplatten Facts Thickness: 4.76 mm Size: 22 Corner radius: 0.8 mm Angle: 60° Clearance angle: 0° Special features Grade: NS9530 (uncoated cermet) Material: cemented carbide Plate form: triangular Chipbreaker: double-sided Hole: with cylindrical hole Application: Turning FAQ What materials is this insert suited for? The NS9530 finishing grade is formulated for machining steel; the TNGG 220408 insert performs best in continuous finishing cuts and small depths of cut on steel workpieces. How many cutting edges are available per insert? The triangular, double-sided design provides multiple usable cutting edges per insert; the cylindrical hole secures the insert for reliable indexing and repeatable re-clamping. What does the 0° clearance angle mean for machining? A 0° clearance angle indicates the insert geometry is neutral in relief; selection of holder geometry and cutting parameters will determine contact conditions and should be matched to machining rigidity. How should the insert be clamped in a holder? Compatibility is ensured by matching form, clearance angle, tolerance class, mounting style, size and thickness; use an ISO-compatible external holder or boring bar with the correct shim/clamp set and screws. Which chipbreaker should be chosen for a given application? Select the chipbreaker and grade according to the workpiece material, the machining strategy and the rigidity of the setup; NS9530 is a finishing grade and pairs with chipbreakers for small cuts and fine surface requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 220408 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a dedicated cermet finishing grade and precise 60° geometry to achieve consistently high surface quality and reduced cutting forces; order the TNGG220408 NS9530 insert directly via Metav Werkzeuge or request application guidance from our consultants. TNGG220408 NS9530 ISO turning insert for turning (Tungaloy) The TNGG220408 NS9530 is an ISO-standard triangular indexable insert designed for precision turning and finishing of steel components, with a sharp cutting edge and a low-relief geometry for continuous cuts. ISO triangular insert TNGG form Uncoated cermet finishing grade NS9530 0.8 mm corner radius for fine finishes Cylindrical hole, double-sided for cost efficiency Consistent finishing performance through a dedicated cermet grade This finishing insert uses an uncoated cermet grade engineered as NS9530, offering a sharp cutting edge and low cutting forces that favour continuous turning operations. The microstructure of cermet provides a stable edge and reduced built-up edge formation when machining steels, which directly translates to improved surface quality and fewer rework cycles. For customers requiring a predictable finish on small depths of cut, this grade ensures reliable results while maintaining tool life and process stability. Geometry and build that support repeatable production The triangular 60° geometry combined with a 0.8 mm corner radius delivers a balance between strength and fine finishing capability. The insert is double-sided, extending service life by enabling indexing, and is supplied with a cylindrical hole for secure clamping in compatible holders. As an ISO-standard insert, compatibility with matched holders is governed by form, relief angle, tolerance class, fastening method, size and thickness, so integration into existing tool systems is straightforward and predictable. Clear geometry also aids in consistent chip flow and vibration control. Shop-floor benefits: efficiency, predictability and lower process risk Adopting this indexable insert reduces machine downtime and simplifies tool management thanks to its indexable nature and robust grade. The combination of reduced cutting forces and a sharp edge lowers power draw and thermal loading at the cutting zone, which helps to maintain dimensional accuracy over longer runs. The insert is particularly suited to finishing passes on steel where high surface integrity and tight tolerances are required, supporting leaner workflows and more predictable part quality with fewer interventions. Contact Metav Werkzeuge today for application advice and to arrange supply of the TNGG220408 NS9530 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for fast, professional assistance Technical data Manufacturer article number: 6997844 SKU (vendor): 6997844-Tungaloy Manufacturer SKU: TUN6997844 Designation: TNGG220408 NS9530 Tungaloy insert Manufacturer: Tungaloy Core dimensions Corner radius: 0.8 mm Included angle: 60° Plate thickness: 4.76 mm Size: 22 mm Relief angle: 0° Special features Grade: NS9530 (uncoated cermet, finishing for steel) Chipbreaker: double-sided Plate form: triangular Hole: with cylindrical hole Model series: ISO turning indexable inserts FAQ What materials is this insert intended for? The NS9530 grade is formulated as a finishing grade for steel; the insert is optimised for continuous turning of steel components. How does the 0.8 mm corner radius affect surface quality? A 0.8 mm corner radius offers a compromise between edge strength and fine surface finish, enabling improved surface integrity on finishing passes with the TNGG220408 NS9530 insert. Is the insert reversible or single-use? The triangular design is double-sided, allowing indexing to a fresh cutting edge and extending the service life per insert. Which holders are compatible with this ISO insert? Compatibility is determined by ISO form, relief angle, tolerance class, fastening method, size and thickness; the TNGG220408 insert fits ISO-standard triangular turning holders that match these parameters. Can this insert be used for interrupted cuts? The NS9530 finishing grade is optimised for continuous cuts and small depths of cut; for heavy or highly interrupted machining, a more robust grade may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGG 220408 X407 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant Tungaloy X407 grade, stable chip control and simple integration with ISO turning holders for a reliable turning process. Order directly via Metav Werkzeuge or consult our team for application-specific advice. TNGG220408 X407 – Tungaloy indexable turning insert, triangular 22 mm, 60° The TNGG220408 X407 is an ISO-standard triangular indexable insert designed for general external and internal turning, offering a balance of wear resistance and edge stability for productive metalcutting. Tungaloy X407 carbide grade, wear-resistant Triangular 22 mm plate, 60° cutting geometry Double-sided chipbreaker for stable chip control ISO-compatible with cylindrical hole for secure clamping Increased productivity through durable carbide grade and edge stability The Tungaloy X407 grade combines a carbide substrate with an application-oriented selection of toughness and hardness to extend tool life under mixed cutting conditions. The result is reduced tool change frequency and predictable performance in series production. With a 0.8 mm corner radius and a 60° cutting angle, the geometry supports consistent cutting forces and surface finish. The plate’s double-sided chipbreaker contributes to controlled chip formation, which lowers the risk of unexpected downtime and supports higher feed rates where process stability is required. Seamless integration with ISO holders and versatile application range As an ISO-standard insert, the triangular plate fits established indexable turning systems when the holder matches the specified form, size and tolerance. The 22 mm size and 4.76 mm thickness make integration straightforward in common external and internal turning setups. The cylindrical hole and standard clamping interfaces ensure reliable seating and repeatable positioning; this simplifies tool management and reduces set-up time on the shopfloor. Compatibility with a wide range of holders enables flexible deployment across short runs and batch production. Better chip control and consistent surface results Process reliability is enhanced by the insert’s geometry and chip management features. The double-sided chipbreaker is engineered to promote consistent chip segmentation, which reduces re-cutting and helps maintain tool edge condition. Stable chip evacuation improves surface quality on the workpiece and decreases secondary operations. The insert’s specifications support machining of a variety of steels and common engineering materials, delivering predictable tool life and repeatable part quality when paired with suitable cutting parameters. For application-specific recommendations and fast delivery of Tungaloy X407 inserts, contact Metav Werkzeuge for expert advice and ordering assistance. Technical data Article number: 6808240 Manufacturer SKU: TUN6808240 Article name: TNGG220408 X407 Tungaloy insert Manufacturer: Tungaloy Facts Shape: triangular Size: 22 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features Material: carbide Grade: X407 (Tungaloy) Chipbreaker: double-sided Application: turning (external and internal) System: ISO turning indexable insert Compatibility: ISO holders (form, tolerance, size and thickness dependent) FAQ What workpiece materials are suitable for this insert? The TNGG220408 X407 insert is designed as a general-purpose turning grade; the X407 carbide formulation is suitable for machining a wide range of steels and typical engineering materials when appropriate cutting data are used. How is the insert mounted in the holder? Mounting requires an ISO-compatible turning holder with matching form, free angle, tolerance class, clamping method, size and thickness; the insert features a cylindrical hole for secure clamping and repeatable positioning. Can the insert be indexed to use multiple cutting edges? Yes, the triangular TNGG220408 design provides multiple usable cutting edges per indexable plate, enabling cost-effective reindexing and maximised tool life. What benefits does the double-sided chipbreaker provide? The double-sided chipbreaker delivers consistent chip control and reduced risk of chip entanglement, which supports better surface finish and more stable cutting conditions during turning operations. Is this insert suitable for internal turning and boring operations? The geometry and dimensions permit use in both external and internal turning applications, provided the chosen holder and tool overhang are appropriate for the machining task. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNGN 110308 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated cemented carbide grade and a precise 0.8 mm corner radius for reliable turning results; the ISO triangular format ensures broad holder compatibility. Order this insert directly via Metav Werkzeuge or consult our specialists for application advice. TNGN 110308 TH10 indexable turning insert by Tungaloy — ISO triangular 60° geometry, uncoated cemented carbide The TNGN110308 TH10 is a triangular ISO indexable insert designed for external and internal turning applications where low cutting forces and clean surface finish are required. ISO triangular insert TNGN110308 TH10 Uncoated cemented carbide grade TH10 Corner radius 0.8 mm for fine finish 60° insert angle, 3.18 mm plate thickness Predictable performance with an uncoated carbide grade The selected TH10 grade is an uncoated cemented carbide developed for versatile performance in non-ferrous materials and similar turning tasks. As an uncoated edge, it produces lower cutting forces and supports clean surface finish, which reduces secondary machining and shortens cycle times. For manufacturers seeking repeatable component quality, this cutting material balances edge sharpness and wear resistance to maintain process stability over sustained production runs. Geometry engineered for consistent dimensional control The insert’s 60° triangle geometry and 0.8 mm corner radius deliver controlled engagement, particularly suited to finishing passes and light to medium interrupted cuts. The 3.18 mm plate thickness provides sufficient rigidity in typical lathe setups, while the absence of a hole simplifies clamping on many standard holders. Note that holder compatibility depends on insert shape, clearance angle, tolerance class, mounting method, size and thickness; ensuring these match the tooling system is critical to achieve repeatable results and protect the cutting edge. System integration and selection guidance for efficient machining A productive tool system comprises the insert, a correctly matched external holder or boring bar, a suitable clamp/insert seat and replacement screws. This indexable insert works well in such a system when chipbreaker and grade are selected to match material, operation and component stability. For example, selecting a chip control variant and a more wear‑resistant grade is appropriate for longer, continuous cuts, while the supplied TH10 grade prioritises sharpness and surface quality for non‑ferrous turning. Compatibility checks and test cuts help validate feed and speed settings before full production. For sharp, economical turning performance select the Tungaloy TNGN110308 TH10 via Metav Werkzeuge — contact Metav Werkzeuge for compatibility advice and order details at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6729065 Manufacturer SKU: TUN6729065 SKU: 6729065-Tungaloy Designation: TNGN110308 TH10 Series: ISO turning indexable inserts Material: cemented carbide (uncoated) Grade: TH10 Facts Corner radius: 0.8 mm Insert angle: 60° Plate thickness: 3.18 mm Plate size: 11 mm Clearance angle: 0° Hole: without hole Special features Triangular plate form (three cutting edges) No chipbreaker supplied Typical application: external and internal turning Compatibility determined by form, clearance angle, tolerance class, mounting, size and thickness ISO‑standardised insert series FAQ What materials is this insert best suited for? The TNGN110308 TH10 insert is intended primarily for non‑ferrous materials and applications where an uncoated cemented carbide edge benefits cutting performance and surface quality. How does the 0.8 mm corner radius affect the finish? A corner radius of 0.8 mm helps produce finer surface finish and improves dimensional consistency on finishing passes compared with larger radii, while still offering modest robustness for light to medium cuts. Is the insert compatible with standard ISO tool holders? Compatibility depends on matching geometry and the insert seat; the ISO triangular form and dimensions allow use in many standard holders, but confirmation of form, clearance angle, tolerance class, mounting and thickness against the holder specification is recommended. Does this insert include a chipbreaker? This specific item is supplied without a chipbreaker, giving flexibility to choose a dedicated chip control variant or different grades when chip formation needs specific management. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com