TNMA 110412 T515 Wendeplatten - Tungaloy
Take advantage of the combination of economical cast-iron machining, CVD-coated carbide performance and ISO compatibility for stable production results; order the TNMA 110412 T515 inserts through Metav Werkzeuge or consult our team for holder compatibility and machining recommendations. TNMA 110412 T515 ISO turning insert for cast-iron turning — Tungaloy The TNMA 110412 T515 is a triangular ISO turning insert designed for economical external and internal turning of cast iron, featuring a CVD-coated carbide grade and a 60° included angle. CVD-coated carbide grade T515 Economical machining of cast iron ISO TNMA 110412 compatible 60° triangle with 1.2 mm radius Efficient cast-iron turning with predictable tool life The insert is made from CVD-coated carbide in grade T515, a specification engineered for the economical machining of cast iron. The CVD coating provides a hard, wear-resistant layer that reduces flank wear under interrupted cuts and abrasive microstructure in cast materials. As a result, cycle times remain consistent and tool changes are minimised, which supports efficient batch production. The combination of substrate and coating is described in simple terms: the carbide core gives toughness, the CVD-coated surface increases abrasion resistance — together they extend useful edge life and reduce process costs. Exact fit and straightforward holder compatibility Designed to the ISO TNMA 110412 geometrical standard, the insert ensures predictable seating and repeatable positioning in compatible holders. The triangular form with a 60° included angle and a cylindrical centre hole supports secure clamping and simple indexability. Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; therefore matching the insert to the appropriate external holder or boring bar is critical. Metav Werkzeuge can advise on holder choices and clamping options to ensure correct fit and optimal cutting conditions. Process stability and application guidance without a chipbreaker This grade is supplied without a chipbreaker, which allows flexibility: the absence of an integral chipbreaker makes the insert suitable for operations where chip control is achieved by the holder geometry, cutting parameters or a separate chipformer. For cast-iron turning, the 1.2 mm corner radius supports a balance between cutting strength and surface finish; select the appropriate radius and cutting data for roughing or finishing to maintain stable cutting forces and consistent surface quality. Choosing the correct feed and depth of cut is decisive for repeatable performance. Practical benefits in workshop workflows With a plate thickness of 4.76 mm and a plate size of 11, the triangular turning insert offers a robust cutting edge and multiple indexable corners for economical use. The central cylindrical hole simplifies indexing and reduces setup time when inserts are replaced. Typical uses include both external turning and internal boring where ISO triangular inserts are applicable; the combination of T515 specification and ISO standardisation supports straightforward stock management and predictable replenishment in production environments. Contact Metav Werkzeuge for technical advice and to reserve Tungaloy TNMA 110412 T515 inserts for reliable cast-iron turning — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6760165 Manufacturer article number: 6760165 SKU (vendor): 6760165-Tungaloy SKU (manufacturer): TUN6760165 Core data Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 11 Included angle: 60° Hole: cylindrical Plate form: triangular Special features Material: carbide Coating / grade: T515 (CVD-coated) Application: turning Model series: ISO turning inserts Chipbreaker: none Compatibility: ISO TNMA 110412 Typical use: external and internal turning Centre hole: with hole (cylindrical) FAQ What material is the TNMA 110412 T515 insert made from? The TNMA 110412 T515 insert is manufactured from carbide and finished with a CVD-coated T515 grade to improve wear resistance when machining cast iron. Is this insert suitable for both external and internal turning? Yes, the ISO triangular geometry and central cylindrical hole make the insert suitable for both external turning and internal applications where ISO TNMA inserts are accepted. How does the absence of a chipbreaker affect use? Supplied without a chipbreaker, the TNMA 110412 T515 requires chip control to be managed by holder design, cutting parameters or an external chipformer, allowing flexibility depending on the machining strategy. Which corner radius is available and what is it good for? This insert has a 1.2 mm corner radius, which offers a compromise between edge strength and surface finish and is commonly used for mixed roughing and finishing passes in cast-iron work. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160404 T505 Wendeplatten - Tungaloy
Take advantage of the combination of economic performance, precise geometry and simple holder compatibility for consistent turning results; order genuine inserts via Metav Werkzeuge or contact our advisors for machining guidance. TNMA 160404 T505 — Tungaloy turning insert for external and internal turning, CVD-coated carbide, 60° triangle The TNMA160404 T505 is an ISO-standard triangular turning insert designed for efficient machining of cast iron in both external and internal turning applications CVD-coated carbide grade T505 Optimised for cast iron machining ISO TNMA triangular insert, 60° included angle High-efficiency grade for cast iron machining The CVD-coated T505 grade combines the wear resistance of a carbide substrate with a protective hard coating to deliver an economical balance between tool life and cutting performance. This specification is developed for the economical machining of cast iron, providing stable cutting behaviour under typical turning conditions. The result is predictable tool life and fewer index changes, which supports a more continuous production flow. Geometry and mounting explained for reliable fit-up The triangular TNMA form with a 60° included angle and a corner radius of 0.4 mm offers versatile edge options for profile work and finishing passes. Plate thickness is 4.76 mm and the insert is supplied with a cylindrical hole, enabling secure clamping in compatible holders or boring bars. Compatibility is determined by insert form, clearance angle, tolerance class, fastening and size, so selecting a matching ISO-style external holder or clamp set ensures correct seating and repeatable concentricity. Operational benefits and selection guidance for process stability Delivered without a chipbreaker, this insert is suited for customers who choose the chip control that matches their material and process; select an appropriate chipformer and cutting parameters according to workpiece stability and whether cuts are continuous or interrupted. The combination of indexability, straightforward clamping and the T505 coating supports cost-effective turning operations, reduced downtime and consistent surface quality when machining cast iron components. Contact Metav Werkzeuge for application advice on Tungaloy TNMA 160404 T505 inserts and for ordering genuine stock; email info@metav-werkzeuge.com or call +49 2822 7131930 for technical assistance and rapid supply. Technical data Article number: 6831358 Manufacturer SKU: TUN6831358 Manufacturer: Tungaloy Model series: ISO turning inserts ISO designation: TNMA160404 Key measurements Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Features & materials Coating: CVD-coated Substrate: carbide Grade: T505 Shape: triangular Chipbreaker: none Hole style: cylindrical hole Application: turning (external and internal) Compatibility: ISO standard; holder fit depends on form, clearance, tolerance, fastening, size, thickness FAQ What materials is this insert intended for? The TNMA160404 T505 insert is specified for the economical machining of cast iron and will perform best when paired with suitable cutting data for that material. Does the insert include a chipbreaker? This Tungaloy insert is supplied without a chipbreaker; chip control should be selected according to the workpiece and machining conditions. Which holders are compatible with the TNMA160404 form? ISO-standard external holders and boring bars that accept TNMA triangular inserts with a cylindrical-hole clamp are compatible; ensure form, clearance and tolerance class match. What does the T505 designation indicate? T505 denotes a CVD-coated carbide grade developed for balanced tool life and economical machining performance on cast iron. Can the insert be used for interrupted cuts? Yes, the insert can be used for interrupted cutting, but the final choice of grade and chipformer should consider the stability of the setup and the desired cutting speed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160404 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant CVD coating, high-speed suitability for cast iron and secure, triangular clamping for consistent, repeatable turning operations. Order the TNMA160404 T5105 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMA160404 T5105 indexable turning insert — CVD-coated carbide, 0.4 mm corner radius (Tungaloy) TNMA160404 T5105 is an ISO-format, triangular indexable insert designed for turning; optimised for high-speed machining of cast iron under stable setup conditions. CVD-coated carbide for high-speed machining Triangle form with 60° cutting angle 0.4 mm corner radius for profile versatility Cylindrical central hole for secure clamping Optimised for high-speed turning of cast iron The CVD-coated carbide grade T5105 is formulated to deliver wear resistance and stable performance at elevated cutting speeds, making it suitable for demanding cast iron operations. The coating reduces abrasive and adhesive wear on the cutting edge, so tool life is extended and surface finish consistency is improved. In practical terms, this means fewer tool changes and more productive machining cycles when the setup is rigid and cutting parameters are adjusted to the material's requirements. Secure fit and dimensional clarity for predictable results Compatibility with toolholders is determined by the insert's form, clearance angle, tolerance class, fastening method, size and thickness; this indexable insert provides clear, standardised dimensions to ensure correct seating. The plate measures an inscribed circle of 16 mm, a thickness of 4.76 mm, and a 60° included angle, with a 0° clearance angle and a cylindrical central hole for positive clamping. The 0.4 mm corner radius permits light profiling while maintaining edge strength, and the triangular shape facilitates three indexing positions per insert for efficient use of cutting edges. Application flexibility and practical machining guidance Delivered without a chipbreaker, the insert is intended for environments where chip control and cutting strategy are defined by the machining task and the selected holder. Typical applications include both external and internal turning; the insert is best employed where rigidity is high and cutting forces are predictable. For optimal results, a chip control solution and cutting parameters should be matched to the material, process stability and required surface quality. The system concept comprises the ISO insert plus a compatible external holder or boring bar, shims/clamps and replacement screws for a complete tooling setup. Production advantages and handling considerations Adopting this triangular indexable insert supports repeatable performance and reduced downtime through quick indexing and standardised geometry. The carbide substrate with CVD finish offers a balance between edge robustness and run-to-run consistency, which is particularly valuable in batch production and serial machining of cast components. For toolroom planning, note that holder selection must match the insert form, thickness and hole style to guarantee safe clamping and repeatable axial and radial positioning of the cutting edge. Contact Metav Werkzeuge for tailored application advice and to request availability of genuine Tungaloy TNMA160404 T5105 inserts (SKU TUN6850283); email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850283 Manufacturer SKU: TUN6850283 Item SKU: 6850283-Tungaloy Model series: ISO turning inserts Manufacturer: Tungaloy Core dimensions Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Clearance angle: 0° Special features Material/coating: CVD-coated carbide (T5105) Grade use: wear-resistant for high-speed cast iron machining Chipbreaker: without Plate form: triangular Hole style: cylindrical central hole Typical application: turning (external and internal) FAQ What materials is this insert intended for? The Tungaloy TNMA160404 T5105 insert is aimed primarily at cast iron machining under stable conditions; the T5105 grade is formulated for wear resistance at high cutting speeds. Is a chipbreaker included with the insert? The insert is supplied without a chipbreaker; chip control must be provided by the chosen holder or a dedicated chipbreaker version if required for the process. How is the insert secured in the holder? The triangular insert is located and clamped via its cylindrical central hole and must be used with a compatible clamping system and holder matched to the insert's form, thickness and tolerance class. What advantage does the 0.4 mm corner radius offer? A 0.4 mm corner radius provides a compromise between edge strength and the ability to produce small profiles or radiused contours while maintaining reasonable cutting-edge robustness. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning, provided the holder and setup ensure sufficient rigidity and correct chip evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160404 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide reliability, universal cast-iron performance, and precise geometry for consistent turning results; order directly via Metav Werkzeuge or consult our specialists for process-specific advice. TNMA160404 T5115 indexable turning insert — triangular 60° design by Tungaloy TNMA160404 T5115 is an ISO-compliant indexable turning insert for general turning applications, optimised for cast-iron machining with a balanced mix of wear resistance and edge stability. ISO‑compliant TNMA triangular insert CVD‑coated carbide grade T5115 Universal suitability for cast iron 0.4 mm corner radius, 60° cutting angle Engineered for stable, repeatable turning performance The CVD‑coated carbide composition and the T5115 grade deliver a dependable balance between abrasion resistance and edge strength, which is particularly valuable in interrupted cuts and mixed-production runs. As an ISO indexable turning insert in a triangular format, the component provides three usable cutting edges per insert and a consistent reference for repeatable set-up. The 60° geometry and a 0.4 mm corner radius reduce cutting forces while maintaining acceptable strength for external and internal turning, contributing to predictable tool life and fewer tool changes. Geometry and grade choice that simplify process decisions Choosing the correct insert geometry is crucial for machining efficiency. The triangular shape and the specified 60° cutting angle offer good versatility across finishing and semi‑finishing operations, while the 4.76 mm thickness ensures rigidity in standard holders. The zero-degree rake (0°) provides a neutral shear condition suited to many grey and ductile cast-iron grades; the absence of a chipbreaker in this variant reduces clogging risk when paired with appropriate cutting parameters. These attributes translate into fewer interruptions and a more efficient machining cycle. Practical benefits at the machine and shop floor level Using this indexable plate reduces set-up time and streamlines inventory management through ISO compatibility and a familiar insert form. The carbide substrate with CVD coating stands up to the abrasive nature of cast iron, delivering longer edge life and more consistent surface finish between tool changes. The central cylindrical hole secures the insert reliably in standard clamping systems, improving repeatability and helping to maintain tolerance control on turned parts. For mixed-series production, the universal nature of the grade supports flexible scheduling without frequent tool swaps. Contact Metav Werkzeuge to specify the optimal holder and cutting data for Tungaloy TNMA160404 T5115 or request tailored recommendations for specific cast-iron applications. Technical data Article number: 6850284 SKU: 6850284-Tungaloy Manufacturer SKU: TUN6850284 Designation: TNMA160404 Full name: TNMA160404 T5115 Tungaloy insert Core dimensions and measurable data Cutting angle: 60° Corner radius: 0.4 mm Plate thickness: 4.76 mm Size: 16 Rake angle: 0° Designs and special features Material: carbide Coating: CVD Grade: T5115 Shape: triangular Hole: with hole (cylindrical) Application: turning Chipformer: none Model series: ISO indexable turning inserts Typical use: external and internal turning; suited for cast iron FAQ What materials is this insert best suited for? The TNMA160404 T5115 insert is formulated as a universal grade for cast iron machining, offering a balanced combination of wear resistance and edge stability for grey and nodular irons. How does the 0.4 mm corner radius affect cutting performance? A 0.4 mm corner radius provides a compromise between strength and finish: it lowers cutting stress compared with a larger radius while improving edge life over a sharp corner in typical turning operations. Is this insert compatible with standard ISO triangular holders? Yes, the insert follows ISO geometry for triangular indexable inserts; compatibility depends on holder form, size, clamping method and thickness — the central cylindrical hole supports secure clamping in standard systems. Does the insert include a chipbreaker? This variant is supplied without a chipbreaker, so cutting parameters and coolant strategy should be selected to ensure reliable chip evacuation during the intended turning operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160404 T5125 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T5125 and the 60° triangular geometry to achieve stable cutting in interrupted conditions and straightforward integration into ISO tool systems; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNMA 160404 T5125 indexable turning insert (60°) by Tungaloy A TNMA160404 T5125 indexable turning insert designed for general turning, providing a robust solution for cast iron machining under interrupted cuts and less-stable set-ups CVD-coated carbide grade T5125 60° triangular geometry for stable cutting 0.4 mm corner radius for fine profiling ISO TNMA 160404 compatible with standard holders Consistent cutting performance for interrupted cuts The CVD-coated carbide grade T5125 is formulated for cast iron machining where chip control and edge stability are critical, especially during interrupted or unstable cuts. The coating enhances wear resistance and thermal stability, which supports longer edge life and fewer tool changes. The triangular 60° geometry delivers predictable engagement and contributes to steady cutting forces, while the 0.4 mm corner radius produces a refined profile on the workpiece. Compatibility with the toolholder depends on form, clearance angle, tolerance class, mounting, size and thickness, so matching the insert to the correct holder is essential for reliable results. Straightforward system integration and mounting reliability Designed to the ISO TNMA 160404 standard, the insert has a nominal size of 16 mm and a plate thickness of 4.76 mm, together with a cylindrical mounting hole, which eases alignment and repeatable clamping in standard external holders or boring bars. The insert is supplied without a chipbreaker, allowing selection of a dedicated chip-control geometry when required for specific materials or cutting conditions. A complete system typically comprises the insert, a suitable external holder or boring bar, a shim/clamp set and the correct fastening screws to ensure optimum seating and repeatable tool life. Process security, productivity and application guidance When selected and paired correctly, this grade provides improved process security and reduced downtime through fewer insert changes. The combination of CVD coating and a robust carbide substrate promotes stable chip formation in cast iron, translating into consistent surface finish and predictable tool-cost per component. For shops seeking reliable, production-proven performance in turning operations, this insert supports efficient, repeatable machining. For further guidance on selecting the appropriate chipbreaker or holder combination for specific alloys, consult the technical advisers at Metav Werkzeuge. Contact Metav Werkzeuge to confirm compatibility, request availability of the Tungaloy TNMA160404 T5125 insert or to receive application-specific cutting data; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850285 Manufacturer SKU: TUN6850285 SKU: 6850285-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Insert designation: TNMA160404 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 60° Rake/clearance angle: 0° Mounting: with cylindrical hole Grade: T5125 Special features CVD-coated carbide Intended application: Drehen (turning) Triangular plate form Supplied without chipbreaker System components: outer holder, boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The Tungaloy TNMA160404 T5125 insert is optimised for cast iron machining and performs well in interrupted cuts or less-stable set-ups thanks to the CVD-coated carbide grade T5125. Does the insert include a chipbreaker? This ISO TNMA 160404 insert is supplied without a chipbreaker, allowing the choice of a dedicated chip-control geometry to match the specific material and machining conditions. Which holder types are compatible with TNMA160404 inserts? Compatibility is determined by form, clearance angle, tolerance class, mounting, size and thickness; TNMA160404 inserts are compatible with ISO-designated external holders and boring bars sized for 16 mm triangular inserts. What are the key dimensional features to check when replacing an insert? Verify the insert designation (TNMA160404), plate thickness (4.76 mm), corner radius (0.4 mm) and the presence of a cylindrical mounting hole to ensure correct seating and clamp engagement. How does the T5125 grade affect tool life and finish? The T5125 CVD coating on the carbide substrate improves thermal stability and wear resistance, which can extend tool life and produce consistent surface finish in cast iron turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160404 T515 Wendeplatten - Tungaloy
Benefit from economical cast-iron machining with a CVD‑coated carbide grade that delivers stable wear resistance and ISO compatibility for straightforward tool changeovers. Combine dependable performance and clear holder compatibility to keep production steady — order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMA 160404 T515 — Turning insert (ISO‑standard triangular) for turning, Tungaloy The TNMA160404 T515 is an ISO‑standard triangular turning insert designed for economical machining of cast iron in external and internal turning applications. ISO triangular insert design CVD‑coated carbide grade T515 Optimised for economical cast iron machining 0.4 mm corner radius for versatile profiling Compatible with ISO clamping systems Increased efficiency for cast‑iron turning The triangular insert offers a balance of cutting edge strength and versatility, making it well suited to repetitive operations on cast iron. The CVD‑coated substrate of grade T515 provides improved wear resistance and consistent surface quality under steady cutting conditions, supporting longer tool life and fewer interruptions. For operations where cycle time and repeatability matter, the combination of coating and carbide base yields measurable productivity gains and predictable replacement intervals. Secure geometry and easy holder compatibility The triangular form with a 60° included angle and a 0.4 mm corner radius provides robust edge support for standard turning profiles. The insert is supplied without chipbreaker, with a cylindrical locating hole, and a plate thickness of 4.76 mm, so compatibility with the toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness. Where quick tool changes are required, selecting an ISO‑compatible clamping system ensures precise seating and repeatable positioning, reducing setup time and scrap. Predictable productivity and application guidance Because the grade is tailored for cast iron machining, stable chip formation and consistent wear behaviour can be expected under appropriate conditions. The insert’s carbide substrate and CVD finish help maintain cutting edge integrity during continuous cuts; interrupted cuts or unstable set‑ups may require different chip control or grades. For matching holders, recommended feed and speed ranges, or advice on replacing chipbreakers, consult our technical team — this ensures the insert is used where it performs best and contributes to a lower overall cost per component. For tailored application advice or to confirm holder compatibility for the Tungaloy TNMA 160404 T515 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6747817 Manufacturer SKU: TUN6747817 SKU: 6747817-Tungaloy Model series: ISO turning inserts Designation: TNMA160404 T515 Material: Carbide Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features CVD‑coated carbide (grade T515) Triangular insert shape Supplied without chipbreaker Application: external and internal turning Optimised for cast iron machining ISO‑standard system compatibility FAQ What materials is this insert best suited for? The TNMA160404 T515 insert is optimised for machining cast iron; its CVD‑coated carbide composition offers improved wear resistance for this material. Is the insert compatible with standard ISO holders? The insert follows ISO dimensions for triangular turning plates, but compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; verify holder specifications before fitment. Does the insert include a chipbreaker? This variant is supplied without chipbreaker; for controlled chip formation in specific operations, a version with an appropriate chipbreaker is recommended. What are the key geometric data to check for mounting? Check the plate size (16 mm), thickness (4.76 mm), corner radius (0.4 mm) and the cylindrical hole specification to ensure accurate seating and clamping. How does the T515 grade affect tool life? The T515 CVD coating improves wear resistance and edge stability during continuous cutting on cast iron, contributing to more predictable tool life and consistent surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160404 TH03 Wendeplatten - Tungaloy
Take advantage of the combination of precise TH03 cutting geometry, ISO‑standard compatibility and an easy‑to‑mount cylindrical‑hole clamping for consistent turning results; order directly via Metav Werkzeuge or consult our team for application advice. TNMA 160404 TH03 Tungaloy indexable insert for turning, 60° triangle, 0.4 mm radius TNMA160404 TH03 Tungaloy indexable insert for ISO‑standard turning operations, designed for low cutting forces and improved chip formation ISO TNMA form, 60° triangle geometry Sharp-edge uncoated carbide grade TH03 0.4 mm corner radius for fine profiling Compatible with cylindrical‑hole clamping systems High efficiency for light to medium‑duty turning The uncoated carbide composition combined with the TH03 grade provides a sharp cutting edge that reduces cutting forces and improves chip flow during external and internal turning. This results in more stable machining with lower power draw and less vibration when comparing similar geometries, making the insert well suited to jobs where minimised cutting effort and repeatable surface quality are priorities. The triangular geometry and small corner radius also support precise profile finishing and controlled transitions on small radii. Fast tool changes and predictable mounting Designed to the ISO standard, the triangular indexable design with a cylindrical hole enables straightforward mounting in a wide range of compatible holders and boring bars. The standardised dimensions—16 mm size and 4.76 mm thickness—allow quick replacement without special adapters, reducing downtime in production. The insert’s compatibility is determined by form, relief angle, tolerance class, clamping style, size and thickness, so choosing matched components ensures consistent repeatability and predictable tool life under stable cutting conditions. Application guidance and material suitability This grade is indicated for general turning where low cutting forces and good chip control are required; it is especially useful on applications that favour a sharp, uncoated edge. Given the absence of a chipbreaker, the geometry works best with appropriate feed and depth settings to promote regular chip formation. For less experienced users, selecting a matching holder and adjusting the feed to the intended surface finish will help to exploit the grade’s benefits while maintaining economical tool life. For reliable, low‑force turning with Tungaloy TH03 inserts, contact Metav Werkzeuge for tailored application guidance and to secure the correct TNMA160404 tooling for the production task. Technical data Article number: 6836524 Manufacturer SKU: TUN6836524 Model series: ISO‑Drehwendeschneidplatten ISO designation: TNMA160404 Shape: triangular Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included hole style: cylindrical Primary angle: 60° Material: carbide (uncoated) Grade: TH03 Chipbreaker: none Mounting: cylindrical‑hole clamping Typical application: turning (external and internal) System components: ISO insert, matching external holder or boring bar, shim/clip set, replacement screws FAQ What types of turning are suitable for this insert? The TNMA160404 TH03 Tungaloy indexable insert is intended for both external and internal turning where a sharp edge and low cutting forces are advantageous, providing good chip formation for light to medium cuts. Is the insert compatible with standard ISO toolholders? Yes, the insert follows ISO dimensions for TNMA form and is compatible with holders that accept a 60° triangular, cylindrical‑hole insert of size 16 and thickness 4.76 mm. Does this grade include a chipbreaker for interrupted cuts? No, the TH03 grade supplied in this insert is without a chipbreaker; machining parameters should be selected to produce regular chips and stable cutting behaviour. How does the 0.4 mm corner radius affect edge strength and finish? A 0.4 mm radius gives a balance between edge strength and the ability to produce finer profiles; it supports improved surface finish on contour work while maintaining adequate toughness for typical turning feeds. Can the TH03 uncoated grade be used on hardened materials? The TH03 uncoated carbide is optimised for low cutting forces and general turning; for hardened or exotic materials, refer to application guidelines or consult for an alternative grade optimised for higher hardness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160404 TH10 Wendeplatten - Tungaloy
Efficient machining is ensured by the combination of a sharp uncoated carbide edge (TH10) and a 0° relief angle, delivering low cutting forces and clean surface quality; the triangular form with a cylindrical hole provides secure clamping for consistent tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for compatibility and selection guidance. TNMA 160404 TH10 ISO turning insert for external and internal turning — triangular insert, 0° relief | Tungaloy The TNMA160404 TH10 is an ISO‑standard triangular turning insert designed for external and internal turning operations, offering a sharp uncoated carbide grade for low cutting forces and fine surface finishes. ISO triangular insert, 0° relief angle Uncoated carbide grade TH10 for low cutting forces 0.4 mm corner radius for fine finishing Cylindrical hole for secure clamping High efficiency for production turning The ISO design and the uncoated carbide composition combine to reduce cutting resistance and improve surface results in many routine turning tasks. As a member of the ISO turning insert family, this triangular geometry supports stable seating and repeatable positioning in compatible holders. The TH10 grade is specified for universal, sharp cutting performance, which translates into shorter cycle times where lower cutting forces matter. For light to medium cuts in non‑ferrous materials and similar workpieces, the result is a clean surface with reduced power demand and less heat generation compared with blunter or coated alternatives. Precise geometry that simplifies process selection Key geometric details such as the 0° relief, the 0.4 mm corner radius and the 4.76 mm thickness directly affect contact conditions, tool rigidity and the achievable finish. The triangular shape provides three usable edges per insert, while the cylindrical hole secures the insert reliably under clamping force, reducing micro‑movement and vibration. Compatibility with a lathe holder depends on form, relief angle, tolerance class, fastening method, size and thickness; these parameters should be matched to ensure repeatable performance and to exploit the insert’s low cutting‑force behaviour. Practical benefits and application guidance When paired with an appropriate holder and cutting data, the insert delivers predictable chip formation and efficient material removal for turning operations. The uncoated cutting edge favours applications where minimal built‑up edge and superior finish are priorities, especially on non‑ferrous alloys. Although this item is supplied without a chipbreaker, selecting the correct chip control geometry and cutting parameters according to the workpiece material and machine stability will maximise throughput and extend effective tool life. For mixed‑material shops, the robust carbide substrate provides reliable edge retention across a broad range of routine turning tasks. For technical advice on selecting the correct holder and cutting data for Tungaloy TH10 inserts, or to secure stock of TNMA160404, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will assist with compatibility and process optimisation. Technical data Article number: 6808266 Manufacturer SKU: TUN6808266 SKU: 6808266-Tungaloy Designation: TNMA160404 Series: ISO turning inserts Material: Carbide Grade: TH10 Numbers / Core technical data Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 60° Designs / Special features Triangle insert form With cylindrical hole for clamping Uncoated carbide cutting edge (sharp universal grade) No chipbreaker supplied Intended for external and internal turning Compatibility determined by form, relief, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The TNMA160404 TH10 insert is specified for non‑ferrous materials and applications where an uncoated, sharp edge produces low cutting forces and a clean surface. How many cutting edges does the triangular insert offer? A triangular insert provides three usable cutting edges; the TNMA geometry allows indexation to a fresh edge when one is worn. Does the insert include a chipbreaker? This item is supplied without a chipbreaker; chip control must be achieved via holder selection and cutting parameters suitable for the workpiece. How is the insert secured in the holder? The cylindrical hole permits secure clamping with the appropriate screw and seat design, helping to maintain repeatable positioning and minimise vibration. What determines whether this insert fits a specific holder? Compatibility depends on the insert form, 0° relief angle, tolerance class, fastening method, size (16 mm) and thickness (4.76 mm); matching these parameters ensures correct seating and reliable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160408 FX105 Wendeplatten - Tungaloy
Combining the carbide construction, the FX105 cutting grade and a 0.8 mm corner radius, this insert delivers stable edge life and process security for turning operations; order the TNMA160408 via Metav Werkzeuge or contact our consultants for tailored machining guidance. TNMA160408 FX105 Tungaloy indexable insert for turning TNMA160408 FX105 Tungaloy indexable insert designed for ISO‑standard turning applications, offering a triangular 60° geometry and a cylindrical mounting hole for secure clamping ISO‑standard triangular insert, 60° geometry Tungaloy FX105 cutting grade for robust wear Carbide composition for consistent edge life Cylindrical hole for stable clamping Stable cutting edge for reliable production The TNMA160408 insert combines a carbide substrate with the FX105 grade to produce a balance of wear resistance and toughness that supports continuous machining. The 0.8 mm corner radius reinforces the cutting edge against overloads and micro‑chipping, which reduces unplanned tool changes and improves component repeatability. In practice, this means fewer interruptions and more stable cycle times when performing external or internal turning tasks. Designed for precise clamping and ISO compatibility The triangular shape with a 60° included angle and a cylindrical hole provides predictable seating in ISO turning holders, while the 4.76 mm plate thickness and size 16 classification are consistent with common tool systems. Check holder form, clearance angle (0°), tolerance class, fastening method, size and thickness for compatibility; correct matching minimises vibration and secures repeatable positioning. This mechanical stability translates directly into improved surface finish and extended insert life. Optimised for productive turning without a chipbreaker This insert is supplied without chipbreaker, allowing selection of the most suitable chip control strategy for the workpiece and machining conditions. The FX105 grade complements insert geometry to manage chip formation and edge stability across diverse turning operations. For materials or processes that demand aggressive chip control, pair the insert with an appropriate holder, coolant strategy or tailored feed rate to maintain consistent chip flow and protect the cutting edge. Practical selection and handling advice for workshop use Select the insert grade and geometry according to material, rigidity and desired surface quality rather than relying solely on feed or speed increases. Store inserts in original packaging to protect edges, inspect index positions before installation and ensure clamping screws and seats are clean. For complex parts or unfamiliar materials, request cutting parameter recommendations and toolholder checks to prevent early wear and to achieve optimal component tolerances. For application-specific advice or to order this Tungaloy TNMA160408 FX105 indexable insert, contact Metav Werkzeuge for personalised support — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 6808267 Manufacturer SKU: TUN6808267 Model series: ISO‑Drehwendeschneidplatten Material: carbide Manufacturer: Tungaloy WPL designation: TNMA160408 FX105 Application: turning Facts Insert size: 16 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Geometry angle: 60° Mounting: with cylindrical hole Chipbreaker: without Special features Triangular plate form ISO‑standard indexable insert Tungaloy FX105 cutting grade Carbide substrate for edge stability Compatible with ISO toolholders (check fit) FAQ Is this insert suitable for both external and internal turning? Yes. The TNMA160408 FX105 Tungaloy indexable insert is designed for external and internal turning; compatibility depends on holder form, clearance angle, fastening and size. Which materials can be machined with this grade? The FX105 grade provides a balance of wear resistance and toughness suitable for a broad range of turning applications; match grade and geometry to the specific workpiece material for optimal results. How does the cylindrical hole affect clamping? The cylindrical hole ensures secure seating and consistent clamping repeatability when used with the correct ISO‑compliant holder, improving process stability and surface finish. Is a chipbreaker included with this insert? No, this insert is supplied without a chipbreaker; chip control must be achieved via holder geometry, cutting parameters or coolant selection. How can genuine Tungaloy inserts be identified? Genuine items carry the manufacturer article number 6808267 and SKU TUN6808267 and are supplied in original Tungaloy packaging; verify these identifiers when ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160408 GT720 Wendeplatten - Tungaloy
Take advantage of GT720 cermet performance and the proven ISO TNMA geometry for consistent surface quality and dimensional stability; order directly via Metav Werkzeuge or consult our specialists for process-matched recommendations. TNMA 160408 GT720 Turning Insert — Tungaloy triangular cermet insert for finishing TNMA160408 GT720 is an ISO-format triangular indexable insert designed for external and internal turning operations where surface finish and dimensional control are prioritised ISO triangular insert TNMA160408 Cermet grade GT720 for fine finishing 60° geometry with R0.8 corner radius Cylindrical hole, thickness 4.76 mm Consistent surface quality and dimensional control for finishing The GT720 grade is a cermet (coated cermet option) developed for finishing to light turning of steel, prioritising surface finish and dimensional accuracy. Its chemistry and coating balance wear resistance with edge integrity to deliver uniform wear over life, reducing the need for frequent index changes. For applications where component tolerance and appearance matter, this grade supports repeatable results and a predictable tool-change interval. Stable geometry and simple holder compatibility The triangular ISO shape with a 60° included angle and a corner radius of R0.8 gives a clear geometric advantage for contour work and shoulder turning, combining strength with the ability to achieve fine radii. The insert features a cylindrical hole and a nominal thickness of 4.76 mm, with a 0° clearance specification for specific holder arrangements. Compatibility with a holder or boring bar is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so matching the insert to the appropriate external holder ensures stable cutting and reduced vibration. Practical material and system guidance for workshop use Made from carbide substrate and available as coated cermet, this insert is optimised for steel machining where a satin surface and accurate dimensions are required. The system build typically comprises the ISO insert, a matching external holder or boring bar, a seating pad or clamp kit and replacement screws. Note that this insert is supplied without a chipbreaker; the choice of chip control should be matched to workpiece material, cutting parameters and machine rigidity. For process planning, select a chipformer and grade aligned with component material and stability to maximise productivity and surface quality. For finishing-critical turning applications, specify Tungaloy’s GT720 grade and get tailored recommendations from Metav Werkzeuge—contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical matching and availability. Technical data Article number: 6851529 Manufacturer SKU: TUN6851529 Label: TNMA160408 GT720 Tungaloy insert Model series: ISO turning inserts Application: Turning Facts ISO code: 160408 Size: 16 Thickness: 4.76 mm Included angle: 60° Corner radius: 0.8 mm Special features Material: carbide substrate Cutting material type: cermet / coated cermet Grade: GT720 Shape: triangular Hole style: cylindrical hole Chipbreaker: none Clearance angle: 0° FAQ What materials is this insert suitable for? The TNMA160408 GT720 insert is designed primarily for steel; the GT720 cermet grade focuses on finishing and light turning to achieve good surface quality and dimensional stability. Does the insert include a chipbreaker? The insert is supplied without a chipbreaker; chip control should be selected according to the workpiece material, machining strategy and machine stability. How is compatibility with a holder determined? Compatibility depends on the insert form, 0° clearance specification, tolerance class, fastening method, size and thickness; matching the ISO TNMA geometry to the correct external holder ensures safe clamping and cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160408 NS520 Wendeplatten - Tungaloy
The TNMA160408 NS520 grade combines ISO‑standard compatibility, a cermet cutting grade tuned for finishing, and a compact triangular 60° form for stable cutting performance; order directly via Metav Werkzeuge or consult the experts for optimal holder pairing. TNMA 160408 NS520 Tungaloy turning insert — cermet grade for finishing, triangular 60° geometry A TNMA160408 NS520 turning insert designed for ISO‑standard turning applications, optimised for finishing and light‑duty machining of steel. ISO‑conforming TNMA form for broad compatibility NS520 cermet for high surface quality Triangular 60° geometry for secure engagement Cylindrical hole for consistent clamping Improved surface finish through a dedicated cermet grade The NS520 cutting grade is a cermet variant developed for finishing to light machining of steel, prioritising surface quality and dimensional stability. The material combination yields a predictable, even wear pattern that helps maintain tolerances over longer tool life. In practice, this means fewer workpiece rejections and a more consistent finish when processing external or internal turning operations. The insert’s polished edges and the absence of an integrated chipbreaker help produce a clean cutting action in light cuts, while the moderate 0.8 mm corner radius supports fine contouring and reduced vibration. Reliable system fit and secure clamping for repeatable results Designed as an ISO‑standard indexable insert, compatibility with holders and boring bars is controlled by form, clearance angle, tolerance class, fastening and thickness. The triangular 60° geometry provides three effective cutting corners per insert, and the cylindrical hole ensures reproducible clamping in standard TNMA seats. The insert features a 0° relief angle which, when paired with an appropriate holder, offers a neutral cutting attitude suited to stable turning setups. Stated dimensions such as the 16 mm nominal size and 4.76 mm thickness support straightforward integration into established tool systems. Practical recommendations to increase process efficiency Best used for turning of steel in finishing passes, the insert performs well when the grade choice matches the workpiece material and the machining strategy: select a suitable chipbreaker if heavy chip control is required, since this variant is supplied without a chipbreaker. The ISO plate is part of an overall system comprising the insert, matching external holder or boring bar, clamping pad and replacement screws; correct matching reduces setup time and increases spindle utilisation. For short‑run production or precision components, the combination of NS520 material behaviour and precise ISO geometry supports high first‑pass quality and predictable tool changes. For precise finishing applications with Tungaloy’s NS520 grade, contact Metav Werkzeuge for tailored advice and fast supply — assistance by phone or email is available to ensure the correct holder and assembly are selected. Technical data Article number: 6808268 Manufacturer SKU: TUN6808268 Label / name: TNMA160408 NS520 Tungaloy‑Wendeplatte Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Insert angle: 60° Relief angle: 0° Hole: with cylindrical hole Special features Model series: ISO‑indexable turning inserts Grade: NS520 (cermet / coated cermet) Application: turning (finishing to light machining of steel) Plate shape: triangular Chipbreaker: none Compatibility: ISO‑standard holders and boring bars FAQ What machining tasks suit this insert best? The TNMA160408 NS520 insert is intended for turning tasks focused on finishing and light machining of steel, delivering improved surface quality and dimensional consistency. Is the insert compatible with standard ISO holders? Yes, the TNMA160408 follows ISO geometry; compatibility depends on holder form, fastening and thickness, and the cylindrical hole supports reliable clamping. Does this insert include a chipbreaker? This variant is supplied without a chipbreaker; for aggressive chip control select a matching chipbreaker style and holder. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMA 160408 T505 Wendeplatten - Tungaloy
Take advantage of reliable, economical turning with the combination of a CVD-coated carbide grade optimised for cast iron and a triangular 60° geometry that gives three indexing edges for extended service life; order directly via Metav Werkzeuge or consult our specialists for application guidance. TNMA 160408 T505 indexable insert — triangular 60° turning insert by Tungaloy, CVD-coated carbide for cast iron machining TNMA 160408 T505 is an ISO-designation triangular indexable turning insert intended for economical machining of cast iron, supplied by Tungaloy CVD-coated carbide for cast iron Triangle form with 60° geometry 0.8 mm corner radius 4.76 mm plate thickness With cylindrical hole for clamping Consistent cutting performance for cast iron with economical life The T505 grade is a CVD-coated carbide developed for the economical machining of cast iron, offering a balance between wear resistance and cost efficiency. The coating enhances heat resistance and reduces flank wear, which in turn supports longer intervals between indexing or replacements. Where interrupted cuts or unstable setups occur, the choice of grade and chip control becomes decisive; this insert’s composition is aimed at stable chip formation and predictable wear behaviour, helping to maintain component quality across production runs. ISO compatibility and secure clamping for straightforward tool assembly Designed to the ISO geometry, the TNMA designation ensures predictable mating with matching holders when form, 0° relief, tolerance class, clamping method, size (16 mm) and thickness (4.76 mm) are observed. The insert is triangular with a 60° included angle and features a cylindrical hole for screw retention, allowing use with a standard external holder or boring bar together with a shim/clamp set and replacement screws. Clear selection and verification of the holder and fastening parts reduce downtime and simplify tool changes, supporting steady throughput in workshop environments. Productivity gains through multiple cutting edges and practical system integration The triangular shape provides three usable cutting edges, which supports efficient indexing and lowers overall tooling consumption per part. When integrated into a matching tool system, the insert contributes to measurable productivity improvements by reducing changeover time and improving process reliability. For optimal results, pair the insert with a holder matched to the component stability and machining parameters; while this grade is optimised for cast iron, selecting an appropriate chipbreaker or another grade will adapt the same ISO geometry for different workpiece materials or cutting conditions. Contact Metav Werkzeuge for tailored application advice and reliable supply of Tungaloy TNMA 160408 T505 indexable inserts. Technical data Manufacturer article number: 6831359 SKU: 6831359-Tungaloy Manufacturer SKU: TUN6831359 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Material: carbide Grade: T505 Designation: TNMA160408 Facts Corner radius: 0.8 mm Included angle: 60° Relief angle: 0° Thickness: 4.76 mm Size: 16 mm Special features CVD-coated carbide grade T505 Triangle insert, with cylindrical hole No chipbreaker fitted ISO standard geometry for turning Intended for economical machining of cast iron FAQ Which materials is this grade intended for? The T505 grade is designed for the economical machining of cast iron; the TNMA 160408 insert performs best on grey and nodular cast irons where the coating and substrate support stable cutting. How does the TNMA160408 designation relate to the insert geometry? TNMA160408 denotes an ISO triangular insert geometry with a 60° included angle; this specific article is size 16 with a thickness of 4.76 mm and a 0.8 mm corner radius, as supplied under the Tungaloy SKU 6831359-Tungaloy. What should be checked for holder compatibility? Compatibility is determined by form, relief angle (0°), tolerance class, clamping method, size and thickness; the TNMA 160408 requires a matching triangular seat and a holder accepting a cylindrical-hole screw clamp. Does this insert include a chipbreaker? This insert is supplied without a chipbreaker; if chip control is required for specific cast-iron grades or unstable conditions, choose an insert grade or geometry with a suitable chipbreaker. How many cutting edges are available per insert? The triangular shape provides three usable cutting edges, allowing efficient indexing and reduced tooling costs per machined part. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160408 T5105 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide grade T5105 and the ISO TNMA 160408 triangular geometry for consistent high‑speed material removal in turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for holder matching and process optimisation. TNMA 160408 T5105 – ISO triangular turning insert for high‑speed cast‑iron machining (Tungaloy) The TNMA160408 T5105 is an ISO‑standard triangular turning insert engineered for high‑speed external and internal turning of cast iron under stable setup conditions. CVD‑coated carbide grade T5105 for wear resistance ISO TNMA 160408 triangular geometry, 60° angle 0.8 mm corner radius for robust edge strength Suitable for high‑speed cast‑iron turning Consistent high‑speed cutting with wear‑resistant grade The insert is made from CVD‑coated carbide designed as a wear‑resistant grade for demanding turning. The T5105 composition provides enhanced resistance to abrasion and thermal softening during elevated cutting speeds, which leads to longer tool life and reduced tool change intervals. In practice, this translates to a more predictable machining process and lower per‑part tooling costs when used in stable, well‑supported setups. The term CVD‑coated denotes a chemical vapour deposition layer that improves surface hardness and adhesion compared with uncoated substrates, enabling reliable performance in continuous production. Predictable geometry for secure clamping and surface quality The triangular TNMA form with a 60° included angle and a 0.8 mm corner radius offers a balance between edge strength and surface finish. The insert is provided with a cylindrical central hole and a plate thickness of 4.76 mm, so compatibility with clamping systems is determined by form, relief angle (0°), tolerance class, fastening method, size and thickness. These parameters ensure the insert seats correctly in standard indexable holders, minimising run‑out and enabling repeatable machining. A modest corner radius such as 0.8 mm reduces the risk of chipping while still allowing good workpiece finish on cast‑iron components. Application guidance for efficient turning operations Specified for turning, the insert is appropriate for both external and internal operations on cast iron where stable cutting conditions prevail. As supplied, the insert is without a chipbreaker, so chip control must be provided by the chosen holder geometry or by selecting an insert variant with an integrated chipformer when necessary. The ISO format simplifies replacement and inventory management within established tool systems. For process setup, pairing the insert with a rigid holder and optimised cutting parameters will yield improved surface integrity and consistent removal rates, supporting higher productivity and less rework. For reliable high‑speed machining, contact Metav Werkzeuge to confirm holder compatibility and process parameters for the Tungaloy TNMA160408 T5105 insert; Metav Werkzeuge provides technical advice and delivery coordination to integrate the insert into existing tool systems. Technical data Manufacturer item number: 6850294 SKU: 6850294-Tungaloy Article name: TNMA160408 T5105 Tungaloy insert Model series: ISO turning inserts Facts Insert designation: TNMA160408 Size: 16 Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included hole: cylindrical Angle: 60° Grade: T5105 Material: carbide Coating: CVD Special features Intended application: turning (external and internal) No chipbreaker (without chipformer) Optimised for high‑speed machining of cast iron under stable conditions Compatibility determined by form, relief, tolerance class, fastening, size and thickness System components: insert, matched external holder or boring bar, shim/clamp set and spare screws FAQ What materials is this insert primarily designed for? The Tungaloy TNMA160408 T5105 insert is primarily intended for machining cast iron in high‑speed turning operations under stable conditions. Does the insert include a chipbreaker for chip control? This insert is supplied without a chipbreaker; chip control should be provided by the selected holder or by choosing a variant with an integrated chipformer when required. How does the T5105 grade affect tool life? The T5105 CVD‑coated carbide grade offers enhanced wear resistance and thermal stability, which extends tool life during continuous high‑speed turning and reduces downtime for replacements. Which geometric parameters determine holder compatibility? Compatibility is determined by the insert form, relief angle (0°), tolerance class, fastening method, size (16) and thickness (4.76 mm); correct matching ensures secure clamping and repeatable results. Is the insert suitable for internal turning as well as external turning? Yes, the insert is suitable for both external and internal turning when combined with an appropriate boring bar or internal holder that matches the ISO TNMA specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160408 T5115 Wendeplatten - Tungaloy
Take advantage of the proven combination of CVD-coated carbide and a stable 60° triangular geometry for reliable chip control and consistent turning results; the insert’s 0.8 mm nose radius and cylindrical hole ensure secure clamping and repeatable performance. Order directly via Metav Werkzeuge or consult the team for application-specific advice. TNMA 160408 T5115 — ISO triangular indexable insert for turning, Tungaloy TNMA160408 T5115 is an ISO-standard triangular indexable insert engineered for external and internal turning in cast iron applications, featuring a 60° cutting geometry and a secure central hole for reliable clamping. ISO TNMA 160408 triangular geometry CVD-coated carbide grade T5115 0.8 mm nose radius, 60° cutting angle With cylindrical hole for secure clamping High-efficiency cutting with controlled wear and stable edge The triangular indexable insert offers a balance between productivity and tool life thanks to its CVD coating on a tough carbide substrate. This surface treatment enhances wear resistance while preserving the cutting-edge stability required when machining abrasive materials such as cast iron. The geometry reduces the need for aggressive feeds, which supports longer tool life and steadier surface finish on workpieces. Engineers benefit from predictable wear behaviour and fewer unscheduled tool changes, improving overall process efficiency. Integration into existing turning systems with clear compatibility criteria Compatibility with a toolholder is determined by the insert’s form, clearance angle, tolerance class, attachment, size and thickness. The TNMA form and 16 mm inscribed circle fit ISO-standard holders, while the 4.76 mm plate thickness and central cylindrical hole allow secure mounting and precise seating. Specifying the correct tolerance class and holder variant ensures repeatable clamping forces and minimal vibration, which in turn improves dimensional accuracy during both external and internal turning operations. Grade selection and application benefits for cast-iron turning The T5115 grade is a universal choice for cast iron, offering an even balance between abrasion resistance and edge strength. For workshops seeking stable chip formation and consistent surface quality, this grade reduces the risk of premature chipping and helps maintain cycle times across batches. When combined with a 0° clearance angle and 60° cutting geometry, the insert supports versatile machining strategies—from roughing to finishing—without frequent grade changes. Practical notes on geometry and process optimisation A 0.8 mm nose radius provides a compromise between edge strength and surface finish: larger radii increase corner life but demand higher cutting forces, while smaller radii favour fine finishes at the cost of edge robustness. The triangular shape permits multiple indexings, lowering tooling costs per part. Absence of a chipbreaker on this variant means the machining strategy should account for chip evacuation; the choice of feeds and speeds, and the stability of the setup, will determine chip form and process reliability. Contact Metav Werkzeuge for tailored tooling advice and available stock of Tungaloy TNMA160408 T5115 inserts; technical consultation and order processing are handled directly by Metav Werkzeuge, email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850295 SKU: 6850295-Tungaloy Manufacturer's SKU: TUN6850295 Manufacturer article number: 6850295 Facts Inscribed circle: 16 mm Plate thickness: 4.76 mm Nose radius: 0.8 mm Cutting angle: 60° Clearance angle: 0° ISO designation: TNMA160408 Special features Material: carbide Coating: CVD-coated Grade: T5115 Shape: triangular Hole: with cylindrical hole Chipbreaker: none Typical application: turning Compatible with ISO-standard holders FAQ What materials is this insert intended for? The T5115 grade is formulated primarily for cast iron machining; the TNMA160408 insert provides a balanced wear resistance and edge stability suitable for that material. How does the insert mount to a holder? Mounting uses the central cylindrical hole and ISO-standard seating; the triangular TNMA form and 4.76 mm thickness ensure correct positioning in compatible external or internal turning holders. Is there a chipbreaker on this insert? This variant is supplied without a chipbreaker; process parameters and clamping stability should be selected to ensure effective chip evacuation. What advantages does the CVD coating provide? The CVD coating increases abrasion resistance while maintaining a tough cutting edge on the carbide substrate, which promotes longer tool life and consistent surface quality. Can the insert be indexed multiple times? Yes, the triangular geometry allows several indexings to use fresh cutting edges, reducing tooling cost per edge compared with single-edge solutions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160408 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T5125 grade, robust cemented carbide construction, and ISO TNMA geometry for reliable performance in interrupted turning operations; order directly via Metav Werkzeuge or consult the specialists for holder compatibility. TNMA 160408 T5125 triangular turning insert for interrupted cuts — Tungaloy The TNMA160408 T5125 is an ISO‑standard triangular indexable insert designed for external and internal turning, optimised for cast iron machining under interrupted cuts and less stable set‑ups. ISO‑standard TNMA 160408 geometry CVD‑coated grade T5125 Triangular 60° insert with 0.8 mm nose radius Cylindrical hole for secure clamping Improved performance for interrupted turning in cast iron The insert delivers dependable results where interrupted cuts and unstable workholding would otherwise shorten tool life. The CVD‑coated T5125 grade, applied to a cemented carbide substrate, is a tougher composition that resists chipping and fracture during involuntary impact events. This combination promotes stable chip formation and reduces the frequency of index changes, which in turn helps maintain throughput and reduces process downtime. For shops processing cast iron, the result is a more predictable machining cycle and fewer scrapped parts. Precise fit and secure clamping for consistent machining Designed to the ISO TNMA form, the insert’s triangular geometry and 60° included angle provide versatility across external and internal turning operations. The cylindrical hole and standard thickness of 4.76 mm ensure repeatable clamping in compatible holders; fit is governed by form, clearance angle, tolerance class, fastening style, size and thickness. The 0° relief angle and 0.8 mm nose radius allow straightforward cutting edge engagement and predictable tool paths while preserving dimensional stability on interrupted profiles. Durable coating and material for lower overall costs The CVD‑coating enhances edge life by providing thermal and abrasive resistance on the cutting face, while the cemented carbide body maintains mechanical strength. In practical terms, the insert extends usable edge life under demanding conditions and minimises unplanned tool changes. This yields a favourable cost‑per‑component ratio when compared with uncoated grades in similar applications. Where surface finish and repeatability matter, the combination of coating and substrate supports longer steady‑state runs and lower overall process variability. Integration into the tooling system and application guidance Use of the insert requires a compatible ISO external holder or boring bar together with an underlay/clamping set and replacement screws as part of the system. The insert is supplied with a cylindrical hole and no integrated chipbreaker, so selection of a matching chip control geometry and holder stability is essential for optimal chips and surface quality. For general turning tasks and intermittent cuts in cast iron, choose a holder and assembly that provide rigid support and correct rake/clearance orientation; adjusting feeds and speeds conservatively at first will verify stability before ramping up production rates. For guidance on holder compatibility or to acquire the Tungaloy TNMA 160408 T5125 insert for robust interrupted‑cut turning, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast availability. Technical data Article number (manufacturer): 6850296 SKU: 6850296-Tungaloy Manufacturer SKU: TUN6850296 Designation: TNMA160408 T5125 Tungaloy indexable insert Facts Nose radius: 0.8 mm Included angle: 60° Thickness: 4.76 mm Plate size: 16 mm Clearance angle: 0° Special features Coating: CVD‑coated Material: cemented carbide Shape: triangular Hole: with cylindrical hole Chipbreaker: without Series: ISO turning indexable insert series Typical use: turning (external and internal), interrupted cuts FAQ What materials is this insert suited for? The Tungaloy TNMA160408 T5125 insert is formulated for machining cast iron, with the T5125 grade chosen for tougher performance under interrupted cuts. How does the TNMA form affect holder selection? ISO TNMA geometry requires a compatible triangular insert seat and clamping system; ensure the holder matches the insert’s 16 mm size, 4.76 mm thickness and cylindrical hole style for secure retention. Is there a chipbreaker on this insert? This insert is supplied without a chipbreaker, so chip control depends on holder design and cutting parameters; select appropriate chip control solutions for efficient evacuation. What benefits does the CVD coating provide? The CVD‑coating on the T5125 grade improves thermal and abrasive resistance, extending edge life and improving performance in interrupted turning of cast iron. Which spare parts are required for assembly? A matching ISO holder or boring bar, an underlay/clamping set and the correct replacement screws complete the system required to mount this insert securely. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMA 160408 T515 Wendeplatten - Tungaloy
Benefit from economical cast‑iron machining and consistent edge life thanks to the CVD‑coated carbide T515 and ISO compatibility; order the insert directly via Metav Werkzeuge or consult our specialists for matching holder selection. TNMA160408 T515 turning insert — triangular ISO turning insert by Tungaloy A TNMA160408 T515 insert designed for ISO‑standard external and internal turning, optimised for efficient machining of cast iron components. CVD‑coated carbide grade T515 Economical for cast iron machining Triangular 60° insert, 0.8 mm radius 16 mm ISO size, 4.76 mm thickness Proven economy and consistent tool life for cast iron turning The CVD‑coated carbide composition and T515 grade provide a robust cutting edge that balances wear resistance with cost‑effectiveness. For production environments where cycle time and tool longevity matter, this insert delivers a stable performance profile across interrupted and continuous cuts. The coating reduces adhesive wear and improves resistance to thermal and mechanical stress, which helps maintain component tolerances and reduces the frequency of index changes. Compatibility with ISO holders is defined by form, clearance angle, tolerance class, mounting method, size and thickness, so the insert integrates into established tool systems without redesign. Exact geometry for repeatable results and simple holder matching The triangular 60° geometry and 0.8 mm corner radius give a reliable cutting corner for shoulder work and general turning, while the 4.76 mm thickness and 16 mm ISO size ensure mechanical stability under moderate cutting forces. The insert’s central cylindrical hole supports positive clamping and accurate seating in standard clamping sets. Because the holder fit depends on multiple dimensions, the system approach—insert, matching outer holder or boring bar, backing plate/clamp set and replacement screws—ensures a repeatable set‑up and minimises setup time. This configuration simplifies production planning and reduces scrap caused by misalignment. Application guidance and practical benefits for workshop use Intended primarily for turning and optimised for cast iron machining, the grade selection supports variable cutting speeds and interrupted cuts typical in serial production or repair work. The absence of an integrated chipbreaker makes the insert suitable where chip control is managed by cutting parameters, coolant strategy or external chip guiding, offering flexibility for differing process demands. For teams less familiar with insert selection: the ISO‑standard designation and the clear specification of geometry and coating help in choosing the correct counterpart holder and cutting data, enabling faster commissioning and fewer trial cuts. For professional turning applications, choose the Tungaloy TNMA160408 T515 insert and contact Metav Werkzeuge for availability and tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6743367 Manufacturer SKU: TUN6743367 SKU: 6743367-Tungaloy Designation: TNMA160408 Material: Carbide Facts Corner radius: 0.8 mm Insert angle: 60° Clearance angle: 0° Plate size: 16 mm Thickness: 4.76 mm Special features Grade/coating: T515 (CVD‑coated) Shape: triangular, with cylindrical hole Chipbreaker: none Application: turning, cast iron machining ISO series: ISO turning inserts FAQ What materials is this insert suitable for? The TNMA160408 T515 insert is specified for the economical machining of cast iron; the T515 grade and CVD coating provide wear resistance adapted to grey and nodular cast irons. How is holder compatibility ensured? Compatibility depends on the insert form, clearance angle, tolerance class, mounting method, size and thickness; the ISO‑standard TNMA geometry ensures fit with appropriately specified ISO holders and clamping sets. Does the insert include a chipbreaker? This variant has no integrated chipbreaker, allowing process engineers to control chip formation through cutting data, coolant and external chip guiding. What does the T515 designation mean for performance? T515 denotes a CVD‑coated carbide grade tuned for a wide range of cast‑iron applications, offering a compromise between edge stability and economical tool life. What is the correct way to reference this product for ordering? Order using the designation TNMA160408 T515, manufacturer SKU TUN6743367 or article number 6743367‑Tungaloy to ensure the correct insert and specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMA 160408 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a sharp TH10 uncoated carbide grade and compact triangular geometry for stable turning and clean surface finishes. Order the TNMA160408 TH10 inserts directly via Metav Werkzeuge or consult the sales team for application-specific advice. TNMA160408 TH10 Tungaloy indexable turning insert — 60° triangular for turning A TNMA160408 TH10 indexable insert engineered for general turning, optimised for non‑ferrous materials and light finishing operations. TNMA 160408 triangular 60° geometry Uncoated carbide TH10 for low cutting forces 0° clearance for stable external turning Cylindrical hole for standard holder compatibility Consistent cutting performance with a sharp universal grade The combination of the TH10 grade and uncoated carbide substrate is aimed at applications where low cutting forces and a clean surface are priorities. The uncoated cutting edge remains sharp and reduces cutting resistance on non‑ferrous materials, supporting more consistent chip flow and fewer burrs. This results in reliable outcomes when machining aluminium alloys, copper alloys or softer metals where a precise edge and modest thermal load are important. The design contributes to shorter cycle times and reduced rework, enhancing process efficiency across batch production. Geometry that controls surface finish and tool life The triangular, 60° geometry with a 0.8 mm corner radius balances form stability and finishing capability: the corner radius reduces edge stress while providing a fine surface at typical finishing feeds. The 0° clearance specification is suited to many external turning and light profiling tasks, where the relief angle supports predictable contact conditions between insert and workpiece. As an ISO‑compliant insert, the geometry and dimensions enable straightforward replacement in standard ISO turning holders, helping to maintain repeatable machining parameters and predictable wear characteristics. Practical guidance for mounting and application choices This ISO insert is supplied with a cylindrical centre hole and requires a compatible clamping system: the suitability of any holder is determined by insert form, relief angle, tolerance class, fastening method, size and thickness. As the insert is supplied without a chipbreaker, selection of a matching chip control solution should be based on material, rigidity of the setup and desired chip form. For operations that demand higher control at heavier cuts, pairing with an appropriate top clamp or selecting a holder with positive rake options will support process stability. If application limits are uncertain, a brief cut test under production‑representative conditions will validate performance. Productivity benefits and inventory simplicity Using a universal, uncoated grade minimises the need for multiple coated variants in stock when primarily machining non‑ferrous components. The standardised ISO format simplifies tool changes and toolholding logistics, helping to reduce setup time and spare part complexity. The insert’s construction and Tungaloy manufacturing standards promote consistent edge quality from index to index, supporting predictable cycle outcomes and easier process planning. For small‑batch or mixed‑series production, this leads to improved throughput and a lower incidence of scrap. For application advice or to request TNMA160408 TH10 inserts from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808272 Manufacturer SKU: TUN6808272 SKU: 6808272-Tungaloy Designation: TNMA160408 TH10 Tungaloy insert Core data Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 60° Special features Shape: triangular Hole: cylindrical, with hole Grade: TH10 Cutting material: uncoated carbide Chipbreaker: none Application: turning Model series: ISO indexable turning inserts Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials are best suited to this insert? The TNMA160408 TH10 is optimised for non‑ferrous materials and softer alloys; the TH10 uncoated carbide grade supports low cutting forces and a clean surface finish on aluminium and similar metals. Is the insert compatible with standard ISO turning holders? Yes — the insert follows ISO dimensions for TNMA 160408 geometry; compatibility is defined by holder form, relief angle, tolerance class, fastening and thickness. Does this insert include a chipbreaker for automatic chip control? This variant is supplied without a chipbreaker; chip control should be achieved via holder selection or an alternative insert geometry if required. What is the hole style and how does it affect clamping? The insert features a cylindrical centre hole, which is suitable for conventional clamping systems and standard screws used in ISO indexable holders. Can the TNMA160408 TH10 be used for finishing passes? Yes — the 0.8 mm corner radius and 60° geometry make the insert appropriate for light finishing operations where a fine surface and low cutting forces are desired. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160412 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of FX105 wear resistance, a 1.2 mm nose radius and ISO-compliant triangular geometry for consistent turning results; order the insert directly via Metav Werkzeuge or consult the team for holder compatibility and application advice. TNMA160412 FX105 Tungaloy turning insert — triangular 60° ISO indexable insert with cylindrical hole TNMA160412 FX105 is an ISO‑compliant triangular insert designed for external and internal turning operations, offering a balance of wear resistance and edge stability in a cemented carbide grade. ISO‑compliant triangular form FX105 cemented carbide grade 1.2 mm nose radius for robust edges Cylindrical hole for secure clamping Consistent chip control and predictable tool life for production turning The FX105 grade is formulated to deliver a combination of wear resistance and toughness, which reduces the frequency of index changes and supports stable tool life in serial production. As an indexable insert, the component simplifies change‑over and inventory management: keeping a stock of standard ISO sizes lowers downtime and enables predictable process planning. The grade’s balanced properties make it suitable where both flank wear and chipping are concerns, helping to maintain dimensional accuracy across runs. Secure mounting and geometric reliability for accurate machining The triangular shape with a 60° included angle and a cylindrical hole ensures positive location and reliable clamping in compatible holders. The 0° relief angle and 4.76 mm plate thickness contribute to rigidity at the cutting edge; this rigidity translates into improved surface finish and reduced vibration in many turning set‑ups. Compatibility with external holders is determined by form, relief angle, tolerance class, clamp type, size and thickness — correct matching avoids slippage and secures repeatable results. Practical versatility: matched chipbreaker and grade selection This insert is intended for turning; selecting a matching chipbreaker and ensuring the FX105 grade suits the workpiece material are essential steps for optimised performance. For heavy cuts, a chipbreaker that favours large chip control together with the grade’s edge stability is recommended, whereas fine finishing benefits from the grade’s wear resistance to preserve surface quality. The system approach — insert, clamping set and suitable screw — provides predictable handling and quick replacement during tool changes. What the geometry means for shopfloor productivity A 1.2 mm nose radius offers a practical compromise between strength and fine detail: it resists corner chipping under interrupted cuts while still enabling acceptable surface finish on bore and external passes. The ISO designation simplifies selection and inventorying across machines, and the cemented carbide substrate sustains cutting temperatures common in turning operations. Using standardised inserts like this one supports lean tooling strategies and reduces set‑up variability between operators. Contact Metav Werkzeuge today for tailored advice on Tungaloy FX105 inserts and to secure compatible TNMA160412 stock for immediate integration into production Technical Data Article number: 6808273 Manufacturer SKU: TUN6808273 Vendor SKU: 6808273-Tungaloy Model series: ISO‑indexable turning inserts Designation: TNMA160412 Grade: FX105 Material: cemented carbide Application: Turning Size: 16 mm Thickness: 4.76 mm Nose radius: 1.2 mm Form: triangular Hole: with hole Hole style: cylindrical hole Relief angle: 0° Included angle: 60° Facts Inscribed circle / size: 16 mm Plate thickness: 4.76 mm Nose radius: 1.2 mm Relief angle: 0° Included angle: 60° Special features ISO‑compliant triangular geometry FX105 Tungaloy carbide grade Cemented carbide substrate Cylindrical hole for clamp fixation Suitable for external and internal turning Compatibility depends on form, relief angle, tolerance class and clamp FAQ What holder types are compatible with this triangular insert? Compatibility is determined by the holder’s form, relief angle, tolerance class, clamp design, size and thickness; match these parameters to the TNMA160412 insert for secure clamping. Is this insert suitable for finishing passes? The FX105 grade provides good wear resistance that supports finishing operations when paired with an appropriate chipbreaker and cutting parameters. How many cutting edges does the insert provide? The triangular geometry offers three main usable cutting edges per indexable position; exact edge count depends on orientation and indexing procedure. Can the insert be used for internal turning? Yes, the geometry and 1.2 mm nose radius allow use in both external and internal turning applications when the correct holder and reach are selected. What does the FX105 designation indicate? FX105 denotes a Tungaloy carbide grade engineered to balance wear resistance, toughness and cutting‑edge stability for general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160412 T505 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide durability and a 1.2 mm corner radius for efficient, repeatable cast‑iron turning; the triangular geometry and 60° cutting angle ensure stable chip formation and predictable tool life. Order the insert directly via Metav Werkzeuge or request application advice from the consultants. TNMA 160412 T505 — Indexable turning insert for turning, CVD‑coated carbide (Tungaloy) A TNMA160412 T505 indexable insert for economical external and internal turning, designed for cast‑iron applications where stable cutting and reliable edge life are required. CVD‑coated carbide grade T505 Economical machining of cast iron Triangle shape with 60° cutting angle 1.2 mm corner radius, cylindrical hole Maximise productivity in cast‑iron turning with a CVD coating that endures The CVD‑coated carbide composition of this insert provides a balance between wear resistance and toughness, making it particularly suited to cast iron. The T505 grade is selected for its economic performance: it extends tool life under steady cutting conditions while keeping machining costs down. Thanks to the CVD‑coated surface, heat and abrasive wear are better resisted compared with uncoated grades, which supports consistent surface quality and reduced rework. These properties translate into measurable gains in productivity for serial turning tasks and medium‑batch production. Clear guidance on compatibility and clamping for secure, repeatable results Compatibility with the toolholder is governed by form, clearance angle, tolerance class, fastening method, size and thickness; the insert conforms to ISO dimensions for easy replacement within standard systems. The triangular plate, with a nominal size of 16 mm and a thickness of 4.76 mm, is supplied with a cylindrical hole and a 0° clearance geometry, which favours stable seating and repeatable location when mounted with the appropriate clamping set. The absence of a dedicated chipbreaker means the part is best applied where cutting is continuous and stable; for interrupted cuts or heavy chip control requirements, inserts with dedicated chipbreaking geometries are recommended. Robust edge geometry and simple selection for predictable tool life A corner radius of 1.2 mm and the 60° wedge angle deliver a compromise between edge strength and the ability to take moderate depths of cut, reducing the risk of edge chipping under common turning conditions. The combination of the triangular form and the T505 grade affords multiple indexing positions before tool change, supporting uptime and lowering tool‑handling frequency. Technical characteristics such as the CVD‑coated surface and carbide substrate mean wear progresses in a gradual, measurable manner, allowing process parameters to be optimised for cost efficiency and consistent part quality. For reliable cast‑iron turning choose the Tungaloy TNMA160412 T505 — contact Metav Werkzeuge for application advice and delivery information at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6831360 Manufacturer article number / SKU: TUN6831360 / 6831360-Tungaloy Model series: ISO indexable turning inserts Numbers / Core Technical Data Plate designation: TNMA160412 Grade: T505 Corner radius: 1.2 mm Plate size: 16 mm Plate thickness: 4.76 mm Cutting angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features / Applications Material: carbide Coating: CVD‑coated Plate shape: triangular Chipbreaker: without chipbreaker Typical application: external and internal turning of cast iron FAQ What materials is this insert intended for? The TNMA160412 T505 insert from Tungaloy is intended primarily for machining cast iron, with the T505 grade designed for economical cutting performance on such materials. Does the insert come with a chipbreaker? This indexable plate is supplied without a chipbreaker, so it is recommended for steady, continuous turning operations; inserts with chipbreaking geometries should be selected for interrupted cuts. How is the insert mounted in the holder? The insert is ISO‑dimensioned and located via its cylindrical hole and triangular form; compatibility depends on the holder's form, tolerance class and clamping arrangement. What benefits does the CVD coating provide? The CVD‑coated layer on the carbide substrate improves resistance to abrasive wear and high cutting temperatures, contributing to consistent surface finish and predictable tool life. Can this insert be indexed multiple times? Yes, the triangular geometry provides multiple usable cutting edges for indexing, supporting longer intervals between tool changes. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMA 160412 T5105 Wendeplatten - Tungaloy
Combining the CVD-coated carbide T5105 grade with ISO compatibility and a robust 1.2 mm corner radius provides a reliable solution for high-speed cast iron turning, delivering stable cutting edges and consistent process results. Order the insert directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. TNMA 160412 T5105 — ISO turning insert (triangle, 60°) by Tungaloy The TNMA160412 T5105 is an ISO triangular turning insert designed for high-speed external and internal turning applications, optimised for cast iron machining. CVD-coated carbide grade T5105 Triangular ISO insert, 60° cutting angle Corner radius 1.2 mm for robust edges Suitable for high-speed cast iron turning Maximise throughput with a wear-resistant cutting grade The combination of CVD-coated carbide and the T5105 grade targets continuous high-speed machining, offering a balance between wear resistance and edge stability. The coating reduces abrasive wear during long cuts on cast iron, while the substrate maintains toughness under steady cutting conditions. This results in fewer tool changes and more predictable tool life, which supports higher machine uptime and better throughput in serial production. The insert’s design aims to maintain form accuracy and surface finish even when machining at elevated cutting speeds. Seamless integration into ISO tooling systems As an ISO-standard triangular insert, the part integrates with common external holders and boring bars when the holder’s form, clearance angle and tolerance class match the insert dimensions. The 0° clearance angle and the cylindrical hole require matching clamping systems and torque settings to ensure repeatable seating. The insert’s triangular geometry with a 60° cutting angle provides three indexed edges, increasing economy per insert and simplifying inventory management. System components typically include a suitable outer holder or boring bar, a shim/clamp set and replacement screws. Process stability and edge strength for consistent results A 1.2 mm corner radius delivers a robust cutting edge that tolerates interruptions and slight variations in feed without premature chipping, which is beneficial for medium to heavy finishing passes. The absence of a dedicated chipbreaker in this specification means the focus is on uninterrupted chip flow under stable conditions; pairing the insert with appropriate feeds and coolant strategies reduces built-up edge and improves workpiece quality. For shops seeking repeatability and low-variation surface finishes, this insert supports consistent cycle times and predictable regrinding or replacement intervals. For application advice or availability of the Tungaloy TNMA160412 T5105 insert, contact Metav Werkzeuge for specific recommendations and compatibility checks — info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6850303 SKU: 6850303-Tungaloy Manufacturer SKU: TUN6850303 Model series: ISO turning inserts Designation: TNMA160412 Facts Cutting angle: 60° Corner radius: 1.2 mm Plate size: 16 mm Plate thickness: 4.76 mm Clearance angle: 0° Hole style: cylindrical Special features Coating: CVD, grade T5105 Material: carbide Application: high-speed turning of cast iron Plate form: triangular Chipbreaker: none Compatibility: ISO standard; check holder form, clearance angle, tolerance class, fastening, size and thickness System components: outer holder or boring bar; shim/clamp set; replacement screws FAQ What materials is this insert designed for? The insert is specified for high-speed machining of cast iron, using the CVD-coated T5105 grade to resist abrasive wear under stable cutting conditions. How many cutting edges are available per insert? The triangular plate form provides three indexed edges; the TNMA160412 geometry allows rotation to fresh edges to extend tool life. Is a chipbreaker included with this insert? This specification lists no chipbreaker; the insert is intended for applications where uninterrupted chip flow and stable machining are present. What holder characteristics are required for correct seating? Correct compatibility depends on matching holder form, clearance angle, tolerance class, fastening method, size and thickness; ensure the clamping system suits a 0° clearance-angle, triangular ISO insert. Can the insert be used for internal turning? Yes, the insert is suitable for both external and internal turning operations, provided that the toolholder and setup maintain required rigidity and clearance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160412 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, CVD‑coated carbide T5115 and a 1.2 mm corner radius for dependable cast‑iron turning; order the insert directly via Metav Werkzeuge or contact the consultants for specification advice. TNMA 160412 T5115 Turning Insert – Tungaloy ISO triangular turning insert for external and internal turning The TNMA160412 T5115 Tungaloy turning insert is an ISO‑standard triangular indexable insert designed for general turning applications, especially suited to cast iron where a balance of wear resistance and edge stability is required. CVD-coated carbide T5115 Universal grade for cast iron ISO TNMA 160412 format Triangular insert with central hole Consistent performance for cast‑iron turning The insert’s CVD‑coated carbide grade T5115 combines wear resistance with edge stability to extend tool life in serial and batch turning operations. This universal grade is tailored for a broad range of grey and nodular cast irons, reducing the need for frequent insert changes and improving uptime. The triangular geometry and the 1.2 mm corner radius produce a robust cutting edge that tolerates variable feed and depth conditions while maintaining dimensional repeatability; for users unfamiliar with coatings, CVD (Chemical Vapour Deposition) applies hard, wear‑resistant layers that protect the carbide substrate during abrasive and high‑temperature cutting. Easy integration with ISO toolholders and secure clamping Compatibility is determined by form, clearance angle, tolerance class, attachment method, size and thickness; the ISO TNMA 160412 format ensures interchangeability with standard holders and boring bars. The insert features a cylindrical central hole for positive seating and secure clamping, supporting stable tool engagement and reduced vibration. The specified 0° clearance angle suits many external turning set‑ups where a neutral relief improves contact geometry, and the 4.76 mm thickness gives adequate support in heavier cuts, translating into reliable surface finish and predictable tool life. Practical benefits and machining economy Using a grade optimised for cast iron and a standardised TNMA form simplifies inventory management and tool changeover procedures. The insert’s balanced performance often leads to longer intervals between indexings and fewer unexpected tool interventions, which improves productivity and lowers per‑part tooling costs. For process planning, note that this variant has no dedicated chipbreaker, so cutting parameters should be chosen to ensure effective chip evacuation in the chosen workholding and coolant arrangement. The combination of ISO conformity, Tungaloy material science and the insert’s geometry supports stable, repeatable turning results across series production. For proven cast‑iron performance with Tungaloy technology, contact Metav Werkzeuge for ordering and technical guidance via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6850304 SKU: 6850304-Tungaloy Manufacturer SKU: TUN6850304 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Format: TNMA 160412 Size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Included hole: with cylindrical hole Insert angle: 60° Special features Material: carbide Coating: CVD Shape: triangular Grade: T5115 (universal for cast iron) Chipbreaker: none Typical application: external and internal turning System components: ISO insert, matching external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The TNMA160412 T5115 Tungaloy turning insert is optimised for cast iron machining thanks to the T5115 grade, while also delivering stable performance in a range of related materials. Does the insert include a chipbreaker for improved chip control? This variant is supplied without a chipbreaker; chip evacuation relies on appropriate cutting parameters and the machine’s coolant and clamping configuration. Which holder types are compatible with this TNMA format? ISO‑compliant external holders and boring bars that accept TNMA 160412 inserts with a cylindrical central hole are compatible; compatibility depends on form, tolerance class and attachment method. How does the CVD coating benefit cutting performance? The CVD coating on the T5115 grade increases wear resistance and protects the carbide substrate at elevated temperatures, resulting in extended tool life and consistent edge stability during turning. Can this insert be used for internal turning as well as external turning? Yes, the insert’s geometry and standard ISO format make it suitable for both external and internal turning applications when paired with the correct holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160412 T515 Wendeplatten - Tungaloy
Benefit from efficient, economical machining and stable chip formation thanks to the CVD-coated T515 carbide grade paired with a 1.2 mm corner radius and ISO-compliant geometry; order the insert directly via Metav Werkzeuge or consult the technical team for application support. TNMA160412 T515 TNMA turning insert (ISO 160412) – CVD-coated carbide, 1.2 mm radius — Tungaloy A TNMA160412 T515 indexable turning insert designed for ISO-standard external and internal turning, optimised for cast-iron machining. ISO triangular insert TNMA 60° geometry CVD-coated carbide grade T515 for cast iron 1.2 mm corner radius for stable cutting 4.76 mm thickness, cylindrical hole fastening Higher throughput for cast-iron turning with economic tool life The CVD-coated carbide grade T515 is formulated for productive machining of cast iron, combining wear resistance with stable chip formation to extend effective tool life. This results in reduced tool change frequency and lower process costs while maintaining surface quality. The neutral topography (no chipbreaker) allows pairing with the appropriate chipformer in the holder, enabling flexibility across roughing and finishing tasks and supporting consistent cycle times in series production. Consistent clamping and repeatable geometry for reliable results The insert follows ISO norms for indexable turning plates, ensuring compatibility with standard holders and boring bars. The triangular shape and cylindrical hole fastening, together with the 60° included angle and 0° clearance geometry, deliver repeatable seating and quick, secure clamping. The 1.2 mm corner radius reduces edge chipping risk under moderate loads, while the 4.76 mm thickness contributes to rigidity and vibration damping, improving dimensional stability on long bores or overhung setups. Practical guidance for efficient use in external and internal turning Suitable for external and internal turning, the insert functions well where stable cutting forces and good surface consistency are required. As an indexable insert without an integral chipbreaker, selection of the correct holder and chip control accessory is crucial: choose a toolholder and shim configuration that match component rigidity and interruption pattern. For interrupted cuts or unstable setups, a holder with positive support and a matching chipformer will preserve edge life and help avoid built-up edge. System approach for quick replacement and production continuity The ISO plate forms part of a complete system comprising the insert, compatible holder, shim and clamping set plus replacement screws. This modular approach simplifies inventory management and minimises machine downtime during tool changes. Identification for ordering is straightforward via SKU TUN6747818; matching the insert to the correct holder geometry and tolerance class ensures optimal seating and performance across repeated indexings. For reliable cast-iron turning with Tungaloy's CVD-coated T515 grade, contact Metav Werkzeuge for tailored application advice and to request SKU TUN6747818 by email (info@metav-werkzeuge.com) or phone (+49 2822 7131930). Technical data Article number: 6747818 Manufacturer SKU: TUN6747818 SKU: 6747818-Tungaloy Facts Corner radius: 1.2 mm Thickness: 4.76 mm Size (inscribed circle): 16 Included angle: 60° Clearance angle: 0° Special features Material: carbide Coating / grade: T515 (CVD-coated) Shape: triangular Hole: with cylindrical hole Chipbreaker: without Typical application: external and internal turning Model series: ISO turning indexable inserts FAQ What materials is this insert suited for? The Tungaloy TNMA160412 T515 insert is optimised for cast iron machining; the CVD-coated T515 grade balances wear resistance and chip formation for economical turning. Is the insert compatible with standard ISO holders? Yes — the plate adheres to ISO dimensions and is intended for use with compatible external holders or boring bars that match the form, clearance angle and thickness. Does the insert include a chipbreaker? This indexable plate is supplied without a chipbreaker; chip control should be managed via the selected holder and chipformer appropriate to the workpiece and process. What identifies the correct item for reordering? Use SKU TUN6747818 or the article number 6747818 when reordering the Tungaloy TNMA160412 T515 turning insert. Which system components are needed to mount the insert? A matching ISO holder or boring bar, a suitable shim/clamping set and the correct replacement screws are required for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160416 T5105 Wendeplatten - Tungaloy
Taking advantage of the CVD‑coated carbide T5105 and the ISO TNMA 160416 geometry ensures high‑speed, wear‑resistant performance when turning cast iron; combine this with the correct holder and clamping set from Metav Werkzeuge for reliable, repeatable results — order direct via Metav Werkzeuge or consult the technical team for matching holders and setups. TNMA 160416 T5105 ISO triangular turning insert for turning – Tungaloy TNMA160416 T5105 is an ISO triangular indexable insert designed for high‑speed turning, primarily intended for stable machining of cast iron. ISO TNMA 160416 triangular insert, 60° geometry CVD‑coated carbide grade T5105 for high‑speed cast iron 1.6 mm corner radius for robust edge life High‑speed performance optimised for cast iron The insert features a CVD‑coated carbide core in grade T5105, engineered for high‑speed machining of cast iron under stable cutting conditions. The coating provides a hard, wear‑resistant surface that reduces flank wear and extends edge life, which translates directly into improved productivity and fewer index changes during serial production. This characteristic benefits jobs where cycle time and tool life are decisive for process economics. Precise geometry for repeatable positioning and clamping This ISO triangular design with a 60° included angle and 1.6 mm corner radius gives a balance between strength and cutting edge accessibility for turning operations. The insert thickness of 4.76 mm and the cylindrical hole enable secure clamping in compatible holders; the specified clearance angle (0°) and dimensional tolerances determine compatibility with the corresponding cutting tool body. Correct selection of holder form, fastening and tolerance class ensures repeatable seating and consistent cutting performance. Practical machining guidance for optimal results Typical uses include external and internal turning where the absence of an integrated chipbreaker (no chipbreaker) requires selection of a suitable holder or external chip control to maintain effective chip control. For semi‑finishing and finishing passes on cast iron, the combination of the T5105 grade and stable set‑up helps achieve consistent surface finish and tool life. Where material, feed or rigidity varies, matching the chip‑forming geometry and clamping stability to the application is recommended. Economic advantages and reliable manufacturer backing Using a dedicated, indexable insert such as this reduces downtime associated with full tool changes; individual edges are rotated or replaced, supporting a productive machining flow with lower tooling overhead. The combination of Tungaloy engineering and the insert’s wear‑resistant coating delivers stable cutting edges and predictable performance, contributing to lower total cost per component and higher process reliability in demanding turning operations. For tailored advice on holder compatibility, clamping sets and the best machining parameters for the T5105 grade, contact Metav Werkzeuge — the team can advise on matching toolholders and supply the correct screws and underlay plates. Technical Data Article number: 6853034 Manufacturer SKU: TUN6853034 Internal SKU: 6853034-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Insert designation: TNMA160416 Size: 16 mm Thickness: 4.76 mm Corner radius: 1.6 mm Included angle: 60° Relief/clearance angle: 0° Hole: with cylindrical hole Special features Material: Hartmetall Grade / coating: T5105 (CVD‑coated carbide) Shape: triangular Chipbreaker: without Typical application: Drehen (turning) System: ISO turning insert, requires matching external holder, underlay/clamping set and replacement screws FAQ What materials is this insert suitable for? The TNMA160416 T5105 insert is formulated for machining cast iron; the T5105 CVD‑coated carbide provides wear resistance suited to high‑speed turning of grey and nodular cast irons. Is a chipbreaker integrated in this insert? This variant is supplied without a chipbreaker; for effective chip control the TNMA160416 insert should be used with an appropriate holder geometry or external chip control measures. Which holder features ensure correct compatibility? Compatibility depends on holder form, clamping method, tolerance class, size and thickness; the insert’s 4.76 mm thickness, cylindrical hole and ISO form must match the intended toolholder. Can this insert be used for internal turning? Yes — the insert is suitable for external and internal turning, provided that rigidity, tool overhang and chip evacuation are addressed for the internal operation. How does the T5105 grade affect tool life? The T5105 CVD coating enhances wear resistance at high cutting speeds, improving flank wear behaviour and extending edge life under stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMA 160416 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide performance, ISO‑standard compatibility and a compact 60° triangular geometry for reliable cast‑iron turning. Order directly via Metav Werkzeuge or ask the consultants for matching holders and fastenings to ensure smooth integration into existing tool systems. TNMA160416 T5115 Tungaloy turning insert — ISO triangular insert for turning The TNMA160416 T5115 is an ISO‑standard triangular turning insert designed for external and internal turning applications, offering a universal CVD‑coated carbide grade optimised for cast‑iron machining. CVD‑coated carbide grade T5115 Optimised for cast‑iron machining TNMA 60° triangular geometry Cylindrical hole, corner radius 1.6 mm Greater process reliability through proven carbide performance The CVD‑coated carbide composition of this triangular indexable insert delivers a balanced combination of wear resistance and edge stability, which is especially valuable when machining cast iron. The coating supports consistent cutting action across a range of cutting conditions, reducing unexpected tool changes and contributing to predictable cycle times. Built to ISO standards, the insert integrates with common external holders and boring bars, simplifying procurement and replacement planning while maintaining part quality. Achieve stable cutting and consistent surface finish The 60° triangular geometry and a corner radius of 1.6 mm provide a robust cutting edge that resists chipping under moderate interruptions and variable feeds. The blunt relief angle of 0° and the standard triangular form help maintain cutting force distribution, which in turn supports a reliable surface finish on turned components. Selecting the appropriate grade and edge radius enables a targeted balance between tool life and dimensional accuracy for high‑volume or batch turning tasks. Designed for straightforward integration and predictable inventory ISO‑specified dimensions and the cylindrical hole fastening make the insert straightforward to locate and secure in compatible tool holders; compatibility is governed by insert form, relief angle, tolerance class, fastening method, size and thickness. This clarity reduces setup time during tool changes and simplifies stock management: holders and clamping sets can be standardised around ISO‑type inserts, lowering procurement complexity and enabling faster changeovers at the machine. Practical choice for cast‑iron turning with flexible application As a universal grade for cast iron, the T5115 sort combines economical cutting performance with reliable chip behaviour in many turning scenarios. The triangular indexable design without an integrated chipbreaker offers flexibility to match chip control to the machining strategy—choose a suitable chipformer or adjust process parameters according to material, depth of cut and rigidity. The insert’s ISO designation ensures that replacement is predictable and that repeat orders match existing tooling systems. For reliable cast‑iron turning with Tungaloy’s T5115 grade, contact Metav Werkzeuge for availability and tailored holder recommendations: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Manufacturer article number: 6853035 Manufacturer SKU: TUN6853035 SKU: 6853035-Tungaloy Designation: TNMA160416 Grade: T5115 Material: Carbide Model series: ISO turning inserts Manufacturer: Tungaloy Facts Corner radius: 1.6 mm Thickness: 4.76 mm Inscribed circle / size: 16 mm Geometry angle: 60° Relief angle: 0° Hole style: cylindrical Special features CVD‑coated carbide substrate Universal grade optimised for cast iron ISO‑standard triangular shape Cylindrical central hole for positive clamping No integrated chipbreaker (choose external chip control) Suitable for external and internal turning FAQ What materials is this insert suitable for? The TNMA160416 T5115 turning insert from Tungaloy (SKU 6853035-Tungaloy) is primarily optimised for cast iron machining but may perform in related materials depending on cutting data and holder rigidity. How does the T5115 grade affect tool life? The T5115 CVD‑coated grade balances wear resistance and edge strength; when used correctly in cast‑iron turning, the TNMA160416 T5115 delivers predictable tool life and consistent surface quality. Which tool holders are compatible with this ISO insert? Compatibility depends on insert form, relief angle, tolerance class, fastening, size and thickness; the TNMA160416 is ISO‑standard and fits holders designed for triangular TNMA inserts with a cylindrical hole. Can this insert be used for finishing operations? Yes — with a suitable feed and depth of cut, the TNMA160416 T5115 can achieve good surface finishes; select the appropriate corner radius and cutting parameters for the required roughness. Is there a chipbreaker on this insert? This triangular insert is supplied without an integrated chipbreaker, allowing chip control to be implemented via process settings or specific chipformers suited to the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com