TNMG 110304 T9225 Wendeplatten - Tungaloy
Benefit from robust, CVD‑coated carbide performance and a versatile, double‑sided chipbreaker that ensures consistent chip control and long tool life; order directly via Metav Werkzeuge or consult our specialists for cutting data and holder compatibility. TNMG 110304 T9225 TNMG110304 turning insert by Tungaloy — CVD‑coated carbide, 60° TNMG110304 T9225 is an ISO‑standard triangular turning insert designed for medium to heavy steel machining with a double‑sided chipbreaker and cylindrical hole for secure clamping CVD‑coated carbide for durable edges Universal T9225 grade for medium/heavy steel Double‑sided chipbreaker for reliable chips ISO TNMG110304 triangular 60° geometry Consistent cutting performance under variable conditions The CVD‑coated T9225 grade is formulated as a robust, universal option for demanding turning operations on steel. The carbide substrate combined with the coating provides increased wear resistance and edge stability when encountering variable engagement or slightly interrupted cuts. These material and coating choices translate into fewer indexings and steadier tool life, reducing unplanned stoppages and improving process reliability for both external and internal turning applications. Geometry and clamping that ensure repeatable accuracy The triangular ISO form with a nominal 60° included angle and 0° rake delivers predictable cutting directions and consistent surface finishes. The insert’s 3.18 mm thickness and 0.4 mm nose radius support stable contact and dimensional repeatability, while the cylindrical hole and standard tolerance classes ensure compatibility with ISO holders. This combination of geometry and secure fastening supports reproducible set‑ups and simplifies tool change procedures in production environments. Economical operation and simple integration into existing systems As a double‑sided, indexable insert, this design halves the number of inserts required per life cycle compared with single‑edged alternatives, improving cost efficiency. The universal chipbreaker layout aids effective chip control across a broad range of cutting depths and feeds, lowering cycle times and reducing the risk of workpiece damage. Compatibility considerations—form, rake, tolerance, fastening, size and thickness—allow straightforward selection of a matching holder, enabling a fast return to production and minimising secondary operations. For dependable medium to heavy steel turning with Tungaloy’s T9225 grade, contact Metav Werkzeuge for tailored cutting parameters, holder recommendations and delivery options at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780790 SKU: 6780790-Tungaloy Manufacturer SKU: TUN6780790 Product label: TNMG110304 T9225 Tungaloy‑Wendeplatte Application: Turning Facts Inscribed circle: 11 mm Thickness: 3.18 mm Nose radius: 0.4 mm Included angle: 60° Rake angle: 0° Special features Material: carbide Coating: CVD‑coated Grade: T9225 Chipbreaker: double‑sided Plate form: triangular Hole style: cylindrical hole Model series: ISO turning inserts Suitable for: external and internal turning Compatibility determined by form, rake, tolerance, fastening, size and thickness FAQ Which materials is this insert suitable for? The TNMG110304 T9225 turning insert by Tungaloy (SKU 6780790‑Tungaloy) is optimised for steel machining and performs well in medium to heavy turning tasks on a broad range of steel grades. Is this insert indexable and how many cutting edges are available? The design is double‑sided and indexable; the TNMG110304 insert provides multiple usable cutting edges, improving economy compared with single‑edged alternatives. What advantages does the T9225 grade offer in production? Tungaloy’s T9225 grade combines CVD coating and a robust carbide substrate to deliver stable edge life, reliable chip formation and high process security under variable cutting conditions. How does the geometry affect surface finish and stability? The ISO 60° triangular geometry with a 0.4 mm nose radius and 0° rake contributes to repeatable dimensional control and a consistent surface finish when used with suitable holders and cutting parameters. Which holders are compatible with this insert? Compatibility depends on holder form, free angle, tolerance class, fastening method, size and thickness; Metav Werkzeuge can advise on the correct external holder or boring bar for this TNMG110304 insert. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 110304 T9235 Wendeplatten - Tungaloy
Take advantage of the T9235 combination of toughness and consistent chip control together with the ISO-compliant triangular form for dependable performance in interrupted and unstable turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TNMG 110304 T9235 Indexable Turning Insert for Turning by Tungaloy — 60° triangular, 0.4 mm corner radius A TNMG110304 T9235 insert designed for precision external and internal turning, optimised for steel machining under unstable or interrupted cutting conditions. CVD-coated carbide grade T9235 Suited for unstable or interrupted cuts 60° triangular form with 0.4 mm radius Double-sided chipbreaker for extended use Improved reliability when machining steels with interrupted cuts The CVD-coated carbide grade T9235 delivers a balance of toughness and wear resistance that is beneficial when cutting steel at lower cutting speeds or under unstable conditions. The coating enhances surface hardness and heat resistance, while the substrate retains fracture resistance, so the insert copes better with vibrations and interrupted cuts. This results in fewer edge failures and more predictable tool life, supporting stable production cycles and reduced scrap rates. Faster set-up and assured holder compatibility Manufactured to ISO dimensions and tolerances, the triangular insert with a 60° included angle and a 0.4 mm corner radius fits a broad range of ISO holders. The plate thickness of 3.18 mm and the standard cylindrical hole ensure repeatable clamping and alignment. Because compatibility depends on form, clearance angle, tolerance class, fastening and size, the standardised geometry simplifies selection of a matching tool holder and minimises set-up time on the machine. Better surface finish and chip control in mixed conditions The double-sided chipbreaker and grade pairing are selected to control chips and maintain edge stability when switching between roughing and finishing passes. The chipbreaker geometry assists in producing manageable chip shapes, reducing the risk of chip entanglement and improving surface quality on both external and internal features. With the 0.4 mm radius, the insert gives a compromise between strength and finish, making it suitable for applications where a modest edge radius improves part integrity without compromising tool life. Operational advantages for production environments Using an ISO-compliant, indexable triangular insert reduces changeover time and inventory complexity because each plate provides multiple cutting edges. The CVD coating and robust substrate lower overall tooling consumption in interrupted or unstable operations, contributing to better cost-efficiency per component. Maintenance routines are simplified through predictable edge-life behaviour, and the insert’s configuration supports a wide range of holder systems and clamping accessories for immediate integration into existing tool sets. For tailored advice on application and holder selection, contact Metav Werkzeuge — they can confirm compatibility, recommend chipbreaker options and supply original Tungaloy inserts directly. Technical data Article number: 6785993 Manufacturer SKU: TUN6785993 Designation: TNMG110304 T9235 Tungaloy insert Core data Corner radius: 0.4 mm Plate size: 11 mm Plate thickness: 3.18 mm Included angle: 60° Clearance angle: 0° Materials & features Material: carbide Coating: CVD-coated Grade: T9235 Application: Turning (external and internal) Chipbreaker: double-sided Hole: with hole, cylindrical hole Plate form: triangular FAQ What steels is this insert best suited for? The Tungaloy TNMG110304 T9235 insert is intended primarily for steel machining where lower cutting speeds, interrupted cuts or unstable conditions demand a tougher, fracture-resistant grade. Is the insert compatible with standard ISO triangular holders? Yes, the insert follows ISO dimensions and fits standard triangular 60° holders; correct compatibility is ensured by matching form, clearance angle, tolerance class, fastening and plate thickness. How does the chipbreaker affect machining? The double-sided chipbreaker on the TNMG110304 helps form short, controllable chips and stabilises edge behaviour, improving surface finish and reducing chip-related interruptions in mixed cutting conditions. Can the insert be indexed to use multiple edges? The triangular, double-sided design provides multiple usable edges per plate, supporting economical indexing and quicker tool changes during production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110304 TH10 Wendeplatten - Tungaloy
Benefit from the combination of TH10 uncoated carbide and a precise 0.4 mm corner radius for low cutting forces and clean finishes in non‑ferrous turning. The ISO‑format design and cylindrical hole ensure consistent clamping and repeatable results; order directly via Metav Werkzeuge or consult our specialists for application guidance. TNMG 110304 TH10 — Tungaloy TNMG turning insert, uncoated carbide, 0.4 mm radius The TNMG 110304 TH10 is an ISO‑standard triangular turning insert designed for external and internal turning operations where low cutting forces and good surface quality are required ISO‑standard TNMG 110304 insert Uncoated carbide TH10 for low cutting forces Double‑sided chipbreaker, 60° geometry 0.4 mm corner radius, 3.18 mm thickness Maximise productivity with consistent cutting performance The combination of the TH10 grade and uncoated carbide delivers a sharp, low‑friction cutting edge that reduces cutting forces and helps achieve a clean surface finish on non‑ferrous materials. As an ISO‑compatible insert, the geometry and tolerance profile mean that once the correct holder is selected, the cutting behaviour becomes highly predictable. The double‑sided chipbreaker lowers tooling cost per edge and supports stable chip control under a variety of feed and depth‑of‑cut conditions, improving throughput on turning operations without sacrificing surface quality. Secure clamping and straightforward integration into existing tool systems Compatibility is determined by holder form, clearance angle 0°, tolerance class, fastening method, size and thickness; the TNMG format fits common external holders when these parameters match. The insert’s cylindrical hole provides reliable seating and repeatable indexation, while the 3.18 mm thickness contributes to torsional rigidity during heavier cuts. Specifying inserts in the ISO‑series reduces setup time and simplifies inventory management, as replacement parts match defined geometric standards rather than requiring bespoke configurations. Application focus: precise turning of non‑ferrous workpieces Specifically produced for turning, this triangular insert excels in tasks where low cutting forces and minimal built‑up edge are crucial. The 0.4 mm corner radius balances edge strength and finish, making it suitable for finishing passes or light profiling on materials such as aluminium and brass. The TH10 uncoated grade is a universal choice for applications where a clean edge without coating is beneficial—especially when the process favours reduced thermal load and reduced smearing on softer alloys. For tailored advice on using the TNMG 110304 TH10 Tungaloy turning insert, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and optimal cutting parameters Technical data Article number: 6808295 Manufacturer SKU: TUN6808295 ISO designation: TNMG110304 Core data Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 60° Hole style: cylindrical Design & features Material: cemented carbide (uncoated) Grade: TH10 Double‑sided chipbreaker Triangular plate form For turning (external and internal) Compatibility depends on holder form, clearance angle, tolerance class, fastening, size, thickness FAQ Which materials is this insert best suited for? The TNMG 110304 TH10 insert from Tungaloy is optimised for non‑ferrous metals and applications that benefit from low cutting forces and a clean surface finish; the uncoated carbide grade supports these objectives. Is the insert reversible and how does the chipbreaker work? Yes, the insert is double‑sided with a chipbreaker on each usable cutting edge, allowing indexable use and extended edge life on the TNMG 110304 TH10. What must be checked for holder compatibility? Compatibility depends on holder form, clearance angle (the insert is specified with clearance angle 0°), tolerance class, fastening method, plate size and thickness—ensure the holder matches the TNMG 110304 profile. Can this insert be used for internal turning as well as external turning? The insert is suitable for both external and internal turning tasks when the correct holder and mounting are used; choose the TNMG 110304 TH10 for applications requiring a fine finish on lighter cuts Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, low‑force cutting geometry and a fine‑finishing NS9530 cermet grade for reliable turning performance; the double‑sided chipbreaker and ISO form ensure repeatable indexing and efficient production. Order the insert directly via Metav Werkzeuge or consult our specialists for application matching. TNMG 110308 NS9530 Tungaloy turning insert — ISO triangular insert for precision finishing TNMG 110308 NS9530 Tungaloy turning insert is an ISO‑standard indexable cutting insert designed for external and internal turning where low cutting forces and superior surface quality are required TNMG110308 NS9530 cermet insert Sharp cutting edge for fine finishing Double‑sided chipbreaker for repeatability ISO triangular form, 60° geometry High‑quality finishing through a cermet grade optimised for turning The insert is produced in the NS9530 uncoated cermet grade, a finishing‑oriented material that provides a sharp cutting edge and consistently low cutting forces. These properties reduce tool–workpiece interaction during continuous cuts and shallow passes, resulting in a notably high surface finish on a range of steels. The short‑chipping tendency of the chipbreaker further supports uninterrupted cutting and predictable tool life, translating into fewer interruptions on the shop floor and improved component consistency. Stable geometry and ISO compatibility for predictable toolsetting With the ISO designation and a 60° triangular form, the insert delivers standardised geometry for straightforward integration into existing holders. The combination of a 60° point form, a corner radius 0.8 mm, and a plate thickness of 3.18 mm creates a balance between edge strength and the ability to achieve fine surface detail. The insert is supplied with a cylindrical hole and double‑sided chipbreaker, allowing two usable cutting edges per side and reliable clamping repeatability in compatible toolholders. Productivity gains from repeatable indexing and tailored chip control The double‑sided chipbreaker design supports consistent chip formation across multiple indexations, which reduces set‑up variability and downtime. For series production and small‑step finishing, the combination of the cermet grade and chipbreaker enables prolonged periods of stable cutting and fewer interventions for surface corrections. Selecting this insert and matching the chipbreaker to the workpiece material and machining stability contributes directly to process efficiency and predictable output quality. Practical guidance for application and holder matching Compatibility with a chosen toolholder depends on the insert shape, clearance angle, tolerance class, clamping style, size and thickness. The ISO format simplifies selection, but confirmation of holder geometry and clamping screws is advised to ensure correct seating and secure fixation. For applications involving continuous finishing cuts on steel where a fine surface and low cutting forces are priorities, this insert is well suited and provides a cost‑effective finishing alternative to coated grades. For precision turning tasks that prioritise surface quality and low cutting forces, contact Metav Werkzeuge for application advice or request the TNMG110308 NS9530 Tungaloy insert via Metav Werkzeuge — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998218 Manufacturer SKU: TUN6998218 SKU: 6998218-Tungaloy Model series: ISO indexable turning inserts Designation: TNMG110308 Grade: NS9530 Manufacturer: Tungaloy Application: Turning Facts Geometry angle: 60° Corner radius: 0.8 mm Plate thickness: 3.18 mm Inscribed circle / size: 11 mm Special features Uncoated cermet grade NS9530 Double‑sided chipbreaker Triangular insert form (ISO) Cylindrical hole for clamping ISO‑standardised insert Compatibility depends on holder form and clamping FAQ Which materials is this insert best suited for? The TNMG110308 NS9530 Tungaloy insert is a finishing grade developed primarily for steel; the uncoated NS9530 cermet excels at continuous cuts and small depths of cut to produce a fine surface. Can the insert be used for both external and internal turning? Yes. The ISO triangular form and cylindrical hole permit use in compatible external and internal turning holders when the clamping system and seat geometry match the insert. How many cutting edges are available per insert? The double‑sided chipbreaker offers multiple indexable edges; the TNMG form provides two usable edges per side depending on orientation and holder support. What does the 0° clearance specification mean for setup? The insert's neutral clearance geometry requires correct holder seating; appropriate holder relief and tolerance ensure secure clamping and the intended cutting edge engagement. Is this an uncoated or coated grade and what are the benefits? This is an uncoated cermet grade (NS9530), chosen for its sharp edge and excellent finish capability during light finishing cuts on steel. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 110308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing capability, ISO compatibility and a low cutting-force uncoated cermet grade to improve surface quality and process consistency; order directly via Metav Werkzeuge or request application advice from our consultants. TNMG 110308 NS9530 — Tungaloy turning indexable insert, 60° triangular, 0.8 mm radius A TNMG 110308 NS9530 insert engineered for finishing in turning applications, offering a sharp edge geometry and optimised performance for continuous cuts in steel Sharp uncoated cermet NS9530 edge 60° triangular geometry for turning 0.8 mm corner radius for fine finishing Double-sided chipbreaker, cylindrical hole Delivering consistently high surface quality with low cutting forces The uncoated cermet grade NS9530 is formulated for finishing operations on steel, providing a sharp cutting edge that reduces cutting forces and produces a superior surface finish. Reduced forces translate into smaller vibrations and more stable machining, which means fewer rework cycles and a lower risk of scrap. For production environments where continuous cuts and small depths of cut are common, this finishing grade supports predictable results and improved component appearance. Fast set-up and reliable seat with ISO-standard compatibility Built to the ISO series of turning inserts, the triangular TNMG form and 60° geometry ensure compatibility with a wide range of standard toolholders. Correct seating and clamping depend on form, clearance angle, tolerance class, clamping method, size and thickness; the combination of a cylindrical hole and standard dimensions enables secure clamping and repeatable positioning. The result is shorter setup times and consistent tool orientation across fixtures and machines. Practical process gains and recommended applications The insert’s 0.8 mm corner radius and double-sided chipbreaker are tailored for fine finishing, particularly where low feed and continuous cutting prevail. As part of an ISO insert system — comprising an insert, matching external holder or boring bar, shim/clamping set and spare screws — the component integrates easily into existing tooling concepts, maintaining process reliability. The use of a cemented carbide body supports mechanical strength while the NS9530 cermet layer focuses on edge sharpness and surface integrity. Contact Metav Werkzeuge for tailored application advice on the Tungaloy TNMG 110308 NS9530 turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific steel grades and cycle strategies Technical data Article number: 6998206 SKU: 6998206-Tungaloy Manufacturer SKU: TUN6998206 Brand: Tungaloy Model series: ISO turning indexable inserts Material: Cemented carbide Facts Corner radius: 0.8 mm Geometry angle: 60° Plate thickness: 3.18 mm Plate size: 11 Special features ISO designation TNMG110308 Uncoated cermet grade NS9530 Triangular plate shape Double-sided chipbreaker Cylindrical hole for clamping Intended use: finishing in turning System components: insert, holder/boring bar, shim/clamping set, spare screws FAQ What materials is this insert best suited for? The TNMG 110308 NS9530 insert is optimised for finishing steel, offering a sharp edge and low cutting forces tailored to continuous cuts and small depths of cut. What are the key geometric details of the insert? This TNMG insert features a 60° geometry, a 0.8 mm corner radius and a plate thickness of 3.18 mm, with an ISO-standard triangular form and a cylindrical hole for clamping. Is the NS9530 grade coated? No, the NS9530 is an uncoated cermet grade designed to provide a sharp cutting edge and excellent surface quality in finishing operations. How does the insert integrate with existing tooling? Compatibility is ensured with ISO-standard toolholders; correct match depends on form, clearance angle, tolerance class, clamping method, size and thickness as specified for TNMG110308. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110308 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp cermet grade and a precise 0.8 mm corner radius for superior finishing performance and low cutting forces; order directly via Metav Werkzeuge or request application advice from our consultants. TNMG 110308 NS9530 indexable insert for turning — Tungaloy The TNMG110308 NS9530 is an ISO-format triangular indexable insert designed for precision turning and fine finishing of steel components with continuous cuts. Uncoated cermet grade NS9530 for fine finishing 0.8 mm corner radius for superior surface finish 60° triangular form, ISO TNMG110308 standard Cylindrical central hole for secure fastening Designed for continuous cuts and low cutting forces Precision finishing for demanding turning workpieces The combination of an uncoated cermet grade and a fine 0.8 mm corner radius delivers consistently low cutting forces and an excellent surface appearance in finishing operations. This geometry is particularly well suited to continuous feeds and small depths of cut, where tool stability and minimal vibration translate directly into fewer rework cycles and less time spent on post-processing. The engineered edge sharpness of the grade supports fine dimensional control and helps achieve tight tolerances without sacrificing tool life. Engineered grade for stable chip control and productivity The NS9530 grade is an uncoated cermet formulated for low-friction cutting and stable chip formation during uninterrupted turning. Its material properties provide a balance between edge integrity and wear resistance, meaning fewer indexings and longer productive runs in finishing passes. For production environments that prioritise surface quality and process repeatability, the grade’s resistance to edge degradation helps sustain consistent part quality across batches and reduces the need for frequent tool changeovers. Secure clamping and ISO compatibility for flexible tooling Compatibility with toolholders is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness. The triangular 60° geometry with a cylindrical hole enables secure seating in a wide range of ISO TNMG holders and turning bars; the double-sided chipbreaker extends indexable life per insert. Where quick insert indexing and stable clamping are required, this standardised form factor simplifies tool inventory and ensures rapid changeovers, while the ISO TNMG110308 designation supports straightforward holder selection and process setup. Recommended applications and system considerations This insert is optimised as a finishing grade for steel where a sharp cutting edge and low cutting forces are decisive. Typical system setup includes the ISO insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws. Selection of the appropriate chipbreaker and insert grade should follow the workpiece material, nature of the cut (continuous or interrupted) and machine stability. For internal and external turning with emphasis on surface integrity and dimensional accuracy, the insert provides a practical balance of performance and predictable tool life. For high-precision finishing with Tungaloy’s NS9530 cermet grade, contact Metav Werkzeuge for supply and tailored application advice: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998214 Manufacturer SKU: TUN6998214 Model series: ISO turning indexable inserts Type designation: TNMG110308 Grade: NS9530 Manufacturer: Tungaloy Core data Corner radius: 0.8 mm Insert size: 11 mm Thickness: 3.18 mm Geometry angle: 60° Clearance angle: 0° Mounting: with hole (cylindrical) Design & special features Material: cemented carbide Coating / grade: uncoated cermet Double-sided chipbreaker Triangular insert form ISO TNMG standard Application: turning FAQ Which materials is this insert intended for? The NS9530 cermet grade is designed primarily for finishing applications in steel; the TNMG110308 insert from Tungaloy excels where low cutting forces and high surface quality are required. Is the insert reversible and how many cutting edges are available? The triangular form with a double-sided chipbreaker provides multiple indexable edges on the TNMG insert, allowing several repositions before disposal. How is holder compatibility determined for this insert? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; ensure the chosen ISO TNMG holder matches these parameters. What types of turning are recommended for this grade? The uncoated cermet grade is optimised for continuous finishing cuts and small depths of cut, offering stable edge performance and excellent surface finish. What else is required to assemble the cutting system? A complete system typically comprises the ISO insert, a compatible external holder or boring bar, a shim/clamp set and replacement fastening screws for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110308 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of a wear‑resistant CVD‑coated carbide grade, precise 60° triangular geometry and secure clamping to ensure stable, high‑speed turning of cast iron. Order genuine Tungaloy inserts via Metav Werkzeuge or consult our technical team for selection and compatibility advice. TNMG 110308 T5105 triangular turning insert by Tungaloy — CVD‑coated carbide for cast iron turning The TNMG110308 T5105 is an ISO‑standard triangular indexable insert designed for turning applications, optimised for high‑speed machining of cast iron under stable cutting conditions. ISO‑standard TNMG triangular form CVD‑coated carbide for high wear resistance Double‑sided chipbreaker geometry 60° cutting angle, 0° clearance angle Stable high‑speed performance for cast iron The CVD‑coated carbide grade T5105 delivers consistent tool life and abrasion resistance during intensive operations on cast iron, enabling higher cutting speeds without premature wear. The coating reduces flank and crater wear, which translates into fewer indexings and longer productive cycles. As an ISO‑standard triangular insert, it supports predictable performance when paired with matching holders; compatibility depends on insert form, clearance angle, tolerance class, clamping method, size and thickness, ensuring repeatable results in serial production. Precision geometry for secure clamping and repeatability Engineered as a triangular insert with an inscribed circle of 11 mm, a corner radius of 0.8 mm and a plate thickness of 3.18 mm, the geometry provides accurate seat engagement and minimal run‑out when used with approved toolholders. The central cylindrical hole offers positive mechanical location for a secure clamp, reducing vibration and improving surface finish. The 60° cutting angle combined with a 0° clearance angle optimises cutting edge strength for shoulder and general turning operations, while the double‑sided chipbreaker supports controlled chip formation under steady cutting conditions. Process economy and reliable chip control Selecting the right chipbreaker and the T5105 wear‑resistant composition improves material removal rates and reduces downtime for insert changes. The indexable design allows two usable cutting edges per side, which spreads tooling cost across multiple operations; combined with controlled chip shaping, this supports safer machining and predictable tool life. For workshops seeking improved throughput on cast iron, this insert offers a balance of productivity, reliable wear behaviour and straightforward indexing that benefits daily production planning. For tailored recommendations on toolholder compatibility and to order genuine Tungaloy TNMG 110308 T5105 inserts, contact Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and fast delivery. Technical Data Article number: 6853010 SKU (vendor): 6853010-Tungaloy Manufacturer SKU: TUN6853010 Model series: ISO‑Drehwendeschneidplatten Material: carbide Coating / grade: T5105 (CVD‑coated carbide) Application: turning Facts Inscribed circle: 11 mm Thickness: 3.18 mm Corner radius: 0.8 mm Cutting angle: 60° Clearance angle: 0° Hole: with cylindrical hole Shape: triangular Chipbreaker: double‑sided Special features ISO‑standard TNMG form CVD‑coated carbide for high wear resistance Suited for high‑speed machining of cast iron Indexable, double‑sided insert for economical use Central cylindrical hole for secure clamping Compatible with ISO‑normed turning toolholders Manufacturer: Tungaloy FAQ What materials is this insert designed for? The TNMG110308 T5105 is formulated primarily for machining cast iron; the T5105 CVD‑coated carbide offers abrasion resistance suited to stable, high‑speed turning of grey and nodular cast irons. How does the chipbreaker help in production? The double‑sided chipbreaker on this triangular insert promotes controlled chip formation and evacuation during turning, which enhances process stability and reduces the risk of built‑up edge and workpiece damage. What are the key dimensions to check for toolholder compatibility? Check the inscribed circle (11 mm), plate thickness (3.18 mm), corner radius (0.8 mm), and the central cylindrical hole specification to ensure correct seat and clamping on the chosen toolholder. How many cutting edges are available per insert? Due to the double‑sided, triangular design, each insert offers multiple indexing positions, making the TNMG110308 an economical choice with several usable cutting edges per insert. Is this an original Tungaloy product? Yes, the item is an original, brand‑new insert from Tungaloy, supplied under the manufacturer article number 6853010 and vendor SKU 6853010‑Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110308 T5115 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated T5115 grade carbide, a 60° triangular geometry and a 0.8 mm corner radius for stable edge life and consistent cast iron turning; order directly via Metav Werkzeuge or consult our advisors for holder compatibility and delivery. TNMG 110308 T5115 Tungaloy turning insert — CVD-coated carbide, 60° triangle The TNMG110308 T5115 is an ISO-format triangular turning insert designed for cast iron turning, offering a CVD-coated carbide grade that balances wear resistance and edge stability. CVD-coated carbide grade T5115 60° triangular geometry 0.8 mm corner radius for edge stability ISO-format, compatible with standard holders Proven cutting performance for cast iron components The TNMG110308 T5115 combines a CVD-coated surface with a robust carbide body to deliver consistent wear resistance in serial cast iron turning. The coating increases heat and abrasion resistance during interrupted cuts and high-volume production, while the tungsten carbide substrate maintains a stable cutting edge. This results in fewer insert changes, predictable tool life and reduced process interruptions — all contributing to improved machining throughput and lower per-part costs. Seamless integration into ISO tool systems As an ISO-standard indexable insert in a triangular form, the component is straightforward to match with suitable external holders and boring bars. Compatibility is governed by form, clearance angle, tolerance class, clamping method, size and thickness; the insert’s triangular shape, cylindrical hole and standard dimensions allow efficient replacement and consistent seating. Clear specification of holder geometry ensures repeatable positioning, minimises setup time and supports reproducible surface finishes across batches. Controlled chips and reliable surface quality The double-sided chipbreaker supports effective chip control, reducing the risk of tangling and facilitating chip evacuation in medium to heavy cuts. The double-sided configuration also contributes to economical use of the insert by offering multiple usable edges per indexation. With a 0.8 mm corner radius and a 60° included angle, the geometry promotes a balanced mix of edge strength and surface integrity, making the insert suitable for finish to medium turning operations where edge stability and consistent part quality are required. For technical advice on the Tungaloy TNMG110308 T5115, holder compatibility or to request supply from Metav Werkzeuge, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with selection and ordering. Technical Data Article number: 6853011 Manufacturer SKU: TUN6853011 SKU: 6853011-Tungaloy Designation: TNMG110308 T5115 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Data Size: 11 mm Thickness: 3.18 mm Corner radius: 0.8 mm Included angle: 60° Rake angle: 0° Special features Material: Carbide Coating: CVD-coated Grade: T5115 Shape: Triangular Hole: with cylindrical hole Chipbreaker: double-sided ISO-standard insert; compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert intended for? The TNMG110308 T5115 is specified as a universal grade for machining cast iron; the CVD-coated carbide composition supports abrasion resistance and edge stability in such applications. How does the T5115 grade influence tool life? T5115’s CVD coating and carbide substrate provide a balanced combination of wear resistance and edge strength, which contributes to predictable insert life and reduced downtime during serial turning. Is this insert compatible with standard ISO holders? Yes — the insert follows ISO norms for form and dimensions; compatibility with a holder depends on matching the insert’s form, clearance angle, tolerance class, clamping method, size and thickness. What advantages does the double-sided chipbreaker offer? The double-sided chipbreaker improves chip control and enables economical use through multiple indexations, supporting cleaner machining and fewer interruptions for chip handling. Can this insert be used for finish turning? With a 0.8 mm corner radius and a stable geometry, the insert is suitable for finishing to medium turning operations where edge stability and consistent surface quality are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110308 T5125 Wendeplatten - Tungaloy
Combining the CVD-coated carbide grade T5125, a robust 60° TNMG geometry and a 0.8 mm corner radius, this insert provides dependable performance for turning cast iron under interrupted cuts and less stable conditions. Order supply or request specification support directly via Metav Werkzeuge for rapid, application-oriented advice. TNMG 110308 T5125 TNMG turning insert for Turning by Tungaloy TNMG110308 T5125 is a triangular ISO turning insert designed for reliable external and internal machining, especially suited to cast iron in interrupted-cut conditions CVD-coated carbide grade T5125 ISO TNMG110308 triangular 60° form 0.8 mm corner radius for robust edge Double-sided chipbreaker, cylindrical hole Stable performance where interruptions occur The combination of a CVD coating and the T5125 carbide substrate gives this triangular insert high resistance to abrasive wear while retaining toughness, which is essential when machining cast iron with frequent interruptions. The insert’s 60° geometry and 0.8 mm corner radius increase edge strength and reduce the risk of chipping during impacts, translating into fewer tool changes and steadier machining cycles. Compatibility within the ISO insert family ensures predictable behaviour when paired with a correctly specified holder. Easy integration into ISO holders for reduced setup time As a member of the ISO turning inserts series, compatibility with holders depends on form, 0° clearance, tolerance class, fastening and insert size. The TNMG format with a cylindrical hole and a plate thickness of 3.18 mm fits common triangular holders and boring bars; the insert can be mounted with standard clamping sets and replacement screws. Specifying matching components in advance reduces setup time, helps maintain concentricity and supports consistent surface finish and dimensional control in batch production. Practical advantages for process security and economy The double-sided chipbreaker design allows both sides to be indexed, extending productive life per insert and offering economical use. The CVD-coated carbide surface is optimised for chip control and wear resistance when turning cast iron, while the triangular form gives three effective cutting positions per side where applicable. For planners and shopfloor engineers, this means fewer tool changes, predictable tool life and improved throughput in mixed-production environments without sacrificing surface quality. For technical specification, availability and application advice on Tungaloy TNMG110308 T5125 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, practice-oriented support Technical data Article number: 6853012 Manufacturer SKU: TUN6853012 SKU: 6853012-Tungaloy Brand: Tungaloy Model series: ISO turning inserts Name: TNMG110308 T5125 Tungaloy insert Facts Geometry angle: 60° Corner radius: 0.8 mm Plate thickness: 3.18 mm Size: 11 Clearance angle: 0° Materials and special features Material: carbide Coating: CVD Grade: T5125 Shape: triangular Hole style: cylindrical hole Chipbreaker: double-sided Application: external and internal turning, interrupted cuts Compatibility: ISO insert holders, clamping sets and replacement screws FAQ What materials is this insert best suited for? This TNMG110308 T5125 insert is optimised for machining cast iron and performs well under interrupted cutting conditions thanks to the T5125 carbide and CVD coating. Is the insert compatible with standard TNMG holders? Yes. The ISO TNMG form, 3.18 mm plate thickness and cylindrical hole make the insert compatible with common triangular holders and boring bars designed for ISO TNMG inserts. How does the double-sided chipbreaker affect tool life? The double-sided chipbreaker allows indexing of both sides, extending the productive life per insert and offering economical use in production settings. What does the 0.8 mm corner radius mean for machining? A 0.8 mm corner radius increases edge strength and resistance to chipping, improving process security when turning with interruptions or less rigid setups. Can this insert be used for internal turning? Yes, the triangular TNMG form and the chipbreaker geometry support both external and internal turning operations when mounted on a suitable boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110308 T9215 Wendeplatten - Tungaloy
Benefit from a combination of high wear resistance, fracture toughness and ISO compatibility for consistent, productive turning operations; order original Tungaloy inserts directly via (Metav Werkzeuge) or consult our specialists for holder matching. TNMG110308 T9215 TNMG turning insert — CVD-coated carbide, 0.8 mm corner radius (Tungaloy) The TNMG110308 T9215 is an ISO-standard triangular turning insert for external and internal turning, engineered for medium steel machining and designed for continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 0.8 mm corner radius for balanced strength ISO TNMG form, 11 mm inscribed circle Double-sided chipbreaker with cylindrical hole High wear resistance for steady production The CVD-coated carbide grade T9215 offers a deliberate balance between wear resistance and edge toughness, making it particularly effective in medium steel machining. The coating delivers thermal and abrasive protection that reduces flank wear under continuous operation, extending in-service life and stabilising machining cycles. For production environments seeking predictable tool life and fewer insert changes, this grade supports higher throughput without sacrificing component quality. Geometry tailored for repeatable surface quality With a 60° triangular form and a 0.8 mm corner radius, the insert achieves a compromise between robustness and achievable surface finish. The 0.8 mm corner radius provides core strength at the cutting edge while still permitting acceptable finishes on turned parts; smaller radii would improve finish but reduce edge strength, larger radii would demand more power. The zero-degree relief angle and 3.18 mm thickness contribute to a stable seating in the pocket, while the cylindrical hole and double-sided design allow reversal for economical use of both cutting edges. Practical advantages on the shop floor A double-sided chipbreaker reduces tooling costs by offering two usable edges per insert and supports efficient stockkeeping. The integrated chip control aids continuous swarf evacuation and promotes consistent surface results, especially when combined with a suitably rigid holder and correct cutting data. The combination of CVD-coated surface and optimised chip control makes this insert a sound choice where productivity and component consistency are primary concerns. System compatibility and selection guidance As an ISO-standard turning insert, compatibility with a holder depends on form, relief angle, tolerance class, fastening method, inscribed circle and thickness; ensure the chosen toolholder matches the TNMG geometry and the mounting screws and clamping plate specified by the holder manufacturer. Select the chipbreaker and grade according to workpiece stability and machining type: the listed grade is ideal for medium steel in continuous to light interrupted cuts. For less stable setups or heavily interrupted cuts, consider a more robust geometry or adapt cutting parameters to maintain edge life. Contact Metav Werkzeuge today to confirm holder compatibility, request original Tungaloy inserts (SKU TUN6772324) or to discuss the best chipbreaker choice for your application — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6772324 Manufacturer SKU: TUN6772324 SKU: 6772324-Tungaloy Material: carbide Grade/coating: T9215, CVD-coated Form: triangular (TNMG) Thickness: 3.18 mm Inscribed circle: 11 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 60° Hole: with cylindrical hole Dimensions & Numbers Radius: 0.8 mm Thickness: 3.18 mm Inscribed circle: 11 mm Included angle: 60° Relief angle: 0° Manufacturer article number: 6772324 Features & Compatibility Double-sided chipbreaker ISO turning insert series For external and internal turning Compatible with matching TNMG holders and boring bars Suitable for medium steel machining Reversible insert for economical use Cylindrical hole for secure clamping FAQ Which materials is this insert intended for? The Tungaloy TNMG110308 T9215 insert is designed primarily for medium steel machining; the CVD-coated carbide grade T9215 combines wear resistance and toughness suited to continuous and slightly interrupted cuts in steel. How does the chipbreaker affect performance? The double-sided chipbreaker on this TNMG geometry promotes stable chip formation and evacuation, improving surface finish consistency and reducing the risk of chip re-cutting during medium steel turning operations. Is the insert reversible and how does that improve cost-efficiency? Yes, the insert is double-sided and reversible; the TNMG110308 design provides two usable cutting edges, effectively halving the cost per edge compared with single-sided inserts under comparable conditions. What should be checked for holder compatibility? Compatibility depends on the TNMG form, relief angle (0°), tolerance class, fastening type, inscribed circle (11 mm) and thickness (3.18 mm); confirm that the selected holder matches these parameters for correct seating and clamping. Can this grade handle lightly interrupted cuts? The T9215 grade is suitable for continuous to lightly interrupted cuts in medium steel, offering a good compromise between edge strength and wear resistance for productive operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, fracture toughness and ISO compatibility to maintain a smooth, productive turning process; order directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. TNMG110308 T9215 — TNMG indexable turning insert, CVD-coated carbide, 60° (Tungaloy) TNMG110308 T9215 is an ISO-standard indexable turning insert designed for external and internal turning, optimised for medium-steel machining. CVD-coated carbide grade T9215 Double-sided chipbreaker 60° triangular geometry 0° clearance angle, cylindrical hole High productivity through wear-resistant grade and geometry The combination of a CVD-coated carbide substrate and the T9215 grade delivers a balance of wear resistance and fracture toughness, making the insert well suited for continuous to slightly interrupted cuts. The triangular geometry with a 60° included angle and a 0° clearance provides predictable cutting behaviour and repeatable edge contact, which reduces machine downtime and increases overall productivity. For practical machining, this means longer intervals between changes and more stable surface finish in serial production. Simple integration with ISO tooling systems reduces setup time Produced to ISO specification, the insert fits standard indexable turning holders when the form, relief angle, tolerance class, clamping method, size and thickness match. The insert’s cylindrical hole enables secure clamping and fast indexing on compatible holders. Specifying ISO-compliant tooling minimises tooling variants in the cabinet and cuts setup time on the shop floor, supporting consistent processes across multiple machines and operators. Targeted application advice for reliable edge life With a corner radius of 0.8 mm and a plate thickness of 3.18 mm, the insert is optimised for turning of medium steel where balanced chip control and edge stability are required. The double-sided chipbreaker supports effective chip control and repeatable performance; selecting the appropriate cutting parameters and holder rigidity will preserve the edge and prevent chipping under light interruptions. For tougher intermittent conditions, choose a more robust geometry or lower cutting depth to maintain tool life and part quality. For reliable medium-steel turning choose the Tungaloy T9215 grade and contact Metav Werkzeuge for tailored advice or to order the TNMG110308 (SKU TUN6773934) by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6773934 SKU manufacturer: TUN6773934 SKU: 6773934-Tungaloy Model series: ISO indexable turning inserts Designation: TNMG110308 T9215 Tungaloy insert Core Dimensions Inscribed circle: 11 mm Corner radius: 0.8 mm Thickness: 3.18 mm Included angle: 60° Clearance angle: 0° Hole: with cylindrical hole Features and Applications Material: Carbide, CVD-coated Grade: T9215 Chipbreaker: double-sided Plate shape: triangular Application: Turning (external and internal) Typical use: Medium steel; continuous to slightly interrupted cuts Compatibility determined by form, relief angle, tolerance, size and thickness FAQ Which materials is this insert best suited for? The TNMG110308 T9215 insert is formulated for medium steel machining, offering a good balance of wear resistance and toughness for general turning operations. Can this insert be used for internal and external turning? Yes; the ISO-spec insert is suitable for both external and internal turning when installed in the correct holder and used with appropriate cutting parameters. How is the insert secured in the holder? The insert features a cylindrical hole for clamping; compatibility depends on matching holder form, relief angle, tolerance class, clamping method, size and thickness. What dimensions are critical when selecting a replacement? Important dimensions include the corner radius (0.8 mm), thickness (3.18 mm), inscribed circle (11 mm) and the 60° included angle. Is the insert indexable and double-sided? The TNMG110308 is indexable and has a double-sided chipbreaker, allowing both faces to be used for economical tool life extension. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110308 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, reliable fracture toughness and simple ISO compatibility to maintain smooth, productive turning operations; order the insert directly via Metav Werkzeuge or consult the specialists for selection and availability. TNMG 110308 T9215 TNMG turning insert for Drehen (Tungaloy) A TNMG 110308 T9215 turning insert designed for external and internal turning applications, optimised for medium steel machining and compatible with ISO tooling systems CVD-coated carbide grade T9215 Optimised for medium steel machining Double-sided chipbreaker for stable cutting 0.8 mm nose radius for versatile finishes ISO-compatible triangular insert, with hole High-productivity performance for steel turning The CVD-coated carbide of grade T9215 combines elevated wear resistance with dependable fracture toughness, enabling sustained production in continuous and lightly interrupted cuts. This composition reduces flank and crater wear, which supports longer in-process lifetime and fewer tool changes — a direct contribution to higher throughput and lower cycle costs. The geometry of the triangular insert supports stable cutting forces and predictable tool behaviour when paired with a suitably rated holder. Consistent surface quality and process stability A double-sided chipbreaker and a 0° clearance angle provide repeatable chip control and cutting conditions, which lead to improved surface finish and dimensional consistency on turned parts. The modest 0.8 mm nose radius balances strength and finish quality: it allows secure engagement on general turning tasks while still enabling acceptable surface roughness for many medium-duty applications. These design choices reduce scrap risk and enhance reproducibility across batches. Clear compatibility and mounting guidance The insert follows ISO designation TNMG110308 and fits when form, clearance, tolerance class, fastening and thickness match the holder specification. The part is triangular with a cylindrical hole and a plate thickness of 3.18 mm, which must be confirmed against the seat and clamp type of the external holder or boring bar. Selecting the correct chipbreaker and grade for the workpiece material and stability of the set-up ensures the full benefit of the insert’s wear properties and cutting-edge durability For high-productivity turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for technical advice and stock information: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 6773924 SKU: 6773924-Tungaloy Manufacturer SKU: TUN6773924 Facts Grade: T9215 Substrate: CVD-coated carbide Application: Turning (Drehen) Designation: TNMG110308 Corner angle: 60° Special features Nose radius: 0.8 mm Clearance angle: 0° Thickness: 3.18 mm Shape: triangular (11) Hole: with cylindrical hole Chipbreaker: double-sided FAQ What materials is this insert suited for? The Tungaloy TNMG110308 T9215 insert is engineered primarily for medium steel machining and offers a balance of wear resistance and toughness suitable for continuous to lightly interrupted cuts. How does the T9215 grade improve production? The T9215 CVD-coated carbide grade extends tool life under typical steel turning conditions, reducing downtime for tool changes and enhancing overall productivity with consistent cutting performance. Is the insert compatible with standard ISO holders? Compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness; the TNMG110308 designation indicates an ISO-form insert that fits matching ISO seats and clamps. What edge preparation and finish can be expected with a 0.8 mm radius? A 0.8 mm nose radius delivers a compromise between strength and surface finish, producing acceptable roughness levels for general turning while providing margin against edge chipping. Can the insert be used for internal turning (boring)? Yes, the TNMG110308 geometry and double-sided chipbreaker allow use in both external and internal turning when correct holder stability and overhang are observed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110308 T9225 Wendeplatten - Tungaloy
Take advantage of the robust T9225 CVD-coated carbide grade and the ISO-standard TNMG110308 geometry for consistent performance in medium to heavy steel turning; the triangular, double-sided design and 0.8 mm corner radius ensure economical indexability and reliable chip control. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG 110308 T9225 turning insert by Tungaloy The TNMG110308 T9225 is an ISO-format triangular indexable insert engineered for external and internal turning in steel applications, combining a tough universal grade with a double-sided chipbreaker for variable cutting conditions CVD-coated carbide T9225 grade ISO triangular TNMG 110308 geometry Double-sided chipbreaker for steel turning 0.8 mm corner radius, 60° included angle Consistent cutting performance with a universal CVD grade The T9225 grade is a CVD-coated carbide developed for robust, universal performance in medium to heavy steel turning. Its composition favours a balance of toughness and wear resistance, which reduces unexpected tool failure when cutting conditions change or when intermittent cuts occur. In practical terms, this means longer effective tool life and fewer insert changes during batch runs. The coating improves heat resistance and adhesion, so the insert maintains cutting-edge integrity under elevated temperatures typical for production turning. Geometry and mounting that support repeatable accuracy The TNMG form follows ISO dimensions and a 60° included angle, with a 0° clearance angle and a 0.8 mm corner radius, enabling secure clamping in standard external holders. The triangular, double-sided format doubles the usable edges per insert, improving cost efficiency. The central cylindrical bore and standard tolerances ensure compatible fitment with ISO holders; correct holder selection—matching form, size and tolerance class—guarantees repeatable cutting geometry and predictable surface finish on the workpiece. Practical benefits: productivity, chip control and selection advice A clear advantage of this indexable design is the integrated chipbreaker, optimised for steel, which stabilises chip formation and evacuation to reduce vibration and tool wear. For machinists, this translates into higher material removal rates and better surface quality with less manual intervention. When selecting the insert, match the T9225 grade and chipbreaker to the workpiece material and machining stability: choose heavier grades for interrupted cuts or unstable setups, and finer parameters for finishing passes to improve surface integrity. For demanding steel turning tasks, choose the Tungaloy TNMG110308 in T9225 grade — contact Metav Werkzeuge for availability and tailored recommendations via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781295 Manufacturer SKU: TUN6781295 Our SKU: 6781295-Tungaloy Designation: TNMG110308 Grade: T9225 Core specifications Substrate/coating: CVD-coated carbide Shape: triangular Size: 11 Thickness: 3.18 Corner radius: 0.8 Compatibility & features Series: ISO turning inserts Included angle: 60° Clearance angle: 0° Bore: with cylindrical hole Chipbreaker: double-sided Typical application: external and internal turning FAQ What materials is this insert suitable for? The TNMG110308 in T9225 is designed primarily for steel turning and performs reliably in medium to heavy machining tasks. How many cutting edges are available per insert? The triangular TNMG geometry provides multiple usable edges; the insert is double-sided, effectively increasing the number of indexable cutting edges. Which holder compatibility must be checked before use? Compatibility depends on form, clearance angle, tolerance class, mounting style, size and thickness; ensure an ISO-compatible external holder is used with the TNMG110308 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110308 T9225 Wendeplatten - Tungaloy
Combining CVD-coated carbide durability with a 0.8 mm nose radius and strict ISO conformity delivers consistent, repeatable performance for medium‑to‑heavy steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. TNMG 110308 T9225 turning insert (TNMG110308) — CVD-coated carbide, 0.8 mm nose radius (Tungaloy) The TNMG110308 T9225 is a triangular ISO turning insert designed for external and internal turning, offering a robust universal grade for varying cutting conditions in steel machining. CVD-coated carbide for robust cutting 0.8 mm nose radius for reliable finishes ISO‑standard TNMG110308 form with 0° relief Double-sided chipbreaker and cylindrical hole Consistent productivity for medium‑to‑heavy steel turning The insert is based on a robust universal grade (T9225) and a CVD-coated carbide substrate engineered for stability under varying engagement conditions. That combination increases process reliability and extends tool life during interrupted cuts or mixed finishing and semi‑roughing passes. By selecting a grade intended for medium‑to‑heavy steel work, manufacturers benefit from fewer tool changes and more predictable cycle times, enhancing throughput on turning operations. Precision profile and surface quality from the 0.8 mm nose A 0.8 mm nose radius balances cutting strength with achievable surface finish: the slightly rounded tip reduces chipping risk while still enabling good surface results on external and internal contours. The insert’s 0° relief and 60° cutting angle provide a clear geometry description for toolpath programming and holder selection, and explain why the component is suitable for many common turning programmes. For less experienced operators, the geometry reduces sensitivity to minor setup variances, improving first‑pass quality. Compatibility and secure clamping for ISO tool systems The part is an ISO‑standard TNMG110308 insert with a triangular form and a cylindrical hole, which ensures compatibility with a wide range of external holders and boring bars that accept TNMG inserts. Compatibility depends on form, relief angle, tolerance class, attachment method, size and thickness: using the correct holder and clamp set secures repeatable positioning and safe indexable performance. The double‑sided configuration offers economical indexing, halving tooling cost per usable edge. Practical machining guidance and material performance The T9225 grade is intended as a general‑purpose solution where slightly increased toughness is needed for variable cut conditions; it performs well where intermittent cutting or modest interruptions occur. For steel applications, select cutting data that favour the grade’s balance of hardness and toughness: moderate cutting speeds with appropriate feed and depth of cut will exploit the CVD coating for improved wear resistance while preserving the cutting edge. When in doubt about recommended parameters or holder matching, technical advice is available to align the insert with specific machine and workpiece setups. For robust, repeatable medium‑to‑heavy steel turning with Tungaloy’s T9225 grade, contact Metav Werkzeuge for stock status and tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer's article number: 6780703 Merchant SKU: 6780703-Tungaloy Manufacturer SKU: TUN6780703 Designation: TNMG110308 Model series: ISO turning inserts Material: carbide Facts Nose radius: 0.8 mm Inscribed circle (size): 11 mm Thickness: 3.18 mm Relief angle: 0° Cutting angle: 60° Special features Grade/coating: T9225, CVD‑coated carbide Double‑sided chipbreaker Triangular form Cylindrical hole Application: turning ISO designation: TNMG110308 Compatible with ISO toolholders for external and internal turning FAQ What materials is this insert suitable for? The TNMG110308 T9225 insert is specified for medium‑to‑heavy steel turning; the T9225 grade and CVD‑coating provide wear resistance and toughness suited to variable cutting conditions in steel. Can this insert be used for internal turning or only external work? The triangular ISO TNMG110308 geometry with a cylindrical hole allows use in both external holders and appropriate boring bars, so it is suitable for internal as well as external turning operations when mounted in a compatible holder. How many cutting edges are available per insert? This indexable insert is double‑sided with a triangular form, providing multiple usable cutting edges before regrinding or replacement is required; the exact number of edges depends on indexing and wear. What does the 0.8 mm nose radius mean for surface finish? A 0.8 mm nose radius offers a compromise between edge strength and surface quality: it reduces edge chipping risk while delivering good surface finishes on profiles and external contours during standard finishing passes. Which holders are compatible with the TNMG110308 form? Compatibility is determined by form, relief angle, tolerance class, attachment method, size and thickness; holders designed for TNMG110308 inserts and matching the 3.18 mm thickness and 11 mm inscribed circle will provide secure clamping and accurate positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110308 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated cemented carbide grade that delivers stable chip formation and reliable performance in interrupted or unstable turning conditions; order original Tungaloy inserts via Metav Werkzeuge or contact our consultants for cutting-data support and rapid supply. TNMG110308 T9235 Turning Insert — CVD-coated cemented carbide, 60°, Tungaloy TNMG110308 T9235 is an ISO-standard triangular turning insert for external and internal turning, optimised for steel machining under interrupted cuts and unstable conditions ISO triangle insert TNMG110308 for turning CVD-coated cemented carbide grade T9235 60° geometry with 0.8 mm corner radius Cylindrical hole and double-sided chipbreaker Reliable performance for unstable cutting conditions The combination of a CVD-coated surface and a cemented carbide substrate provides a balanced wear resistance and toughness that favours productivity when machining steel at conservative speeds. In practice, the durable coating reduces flank wear and adhesion while the grade is formulated for lower cutting speeds and interrupted cuts; this results in more consistent tool life and fewer unplanned changeovers. The triangular geometry with a 60° included angle offers a robust cutting edge that tolerates variations in rigidity between holder and workpiece. Better chip control and clearer process results A double-sided chipbreaker on a reversible insert improves chip shaping across a range of feeds, reducing the risk of long, entangling swarf and easing evacuation from the cutting zone. The 0.8 mm corner radius balances strength and surface finish: larger radii protect the edge under load, while this specific radius still enables acceptable surface quality for many turned components. Explaining the term: a chipbreaker is a machined groove on the rake or face that actively controls chip curl and breakage, which helps stabilise cutting forces and supports predictable cycle times. Clear compatibility and mounting information Compatibility with toolholders is governed by form, relief angle (0°), tolerance class, fastening style, size and plate thickness; the insert thickness is 3.18 mm and the plate size is 11 mm, so matching holders and clamp kits is essential for safe, repeatable clamping. The insert is supplied with a cylindrical hole, enabling secure fixation and simple indexing; being double-sided, the insert can be rotated to present a fresh cutting edge, improving economy per insert and simplifying inventory management. Practical choice for shop-floor reliability Engineered for turning, this insert version performs where interrupted cuts, variable clamping and mixed-batch production demand resilience rather than maximum speed. The grade designation T9235 identifies a tougher, more ductile coating/substrate combination suited to steel workpieces and less stable set-ups; this translates to fewer broken tools and a smoother production flow. For workshops aiming to reduce downtime and increase first-pass yield, the focus on stable chip formation and consistent edge behaviour brings measurable benefits. For tailored cutting-data, holder compatibility checks or to secure genuine Tungaloy TNMG110308 T9235 inserts for steel turning, contact Metav Werkzeuge for expert assistance and prompt delivery via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 6785994 Manufacturer SKU: TUN6785994 Model series: ISO turning inserts Item designation: TNMG110308 T9235 Tungaloy turning insert Data Geometry: 60° triangle Corner radius: 0.8 mm Plate size: 11 mm Plate thickness: 3.18 mm Relief angle: 0° Hole: cylindrical Special features Material: cemented carbide Coating: CVD-coated Grade: T9235 (tough grade for steel) Chipbreaker: double-sided Mounting: reversible, with hole Application: external and internal turning FAQ What holders are compatible with this insert? Holders that accept the TNMG form with matching size, thickness and 60° geometry are compatible; the TNMG110308 T9235 insert requires a holder that secures the plate via a cylindrical hole and supports the specified plate thickness. Is this grade suitable for stainless steel? The T9235 grade is optimised for steel and particularly for unstable or interrupted cuts; for stainless steel a different grade selection may be preferable depending on work-hardening behaviour. How many cutting edges does the insert provide? The reversible triangular format and double-sided chipbreaker give multiple usable edges per insert, improving economics versus single-edge tools when using the TNMG110308 geometry. Does the coating help with adhesion at lower speeds? Yes, the CVD-coated layer on the cemented carbide substrate reduces adhesion and flank wear during lower-speed machining and during interrupted cutting typical for the T9235 application. What is the purpose of the 0.8 mm corner radius? A 0.8 mm corner radius enhances edge strength for interrupted cuts while still permitting acceptable surface finishes on turned parts; it is a compromise between robustness and finish quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110308 TH10 Wendeplatten - Tungaloy
Take advantage of the sharp TH10 uncoated carbide grade and the precise r0.8 corner radius for low cutting forces and clean surface finishes in turning operations; order directly via Metav Werkzeuge or request application advice from our consultants for seamless tool integration. TNMG 110308 TH10 triangular indexable insert for turning, 60° — Tungaloy TNMG 110308 TH10 Tungaloy turning insert is an ISO‑standard triangular insert designed for versatile external and internal turning applications, engineered to deliver low cutting forces and improved surface quality on non‑ferrous materials. ISO triangular insert TNMG110308 Uncoated carbide grade TH10 r0.8 corner radius for fine finishing Double-sided insert with cylindrical hole Reliable performance for non‑ferrous and low‑force turning The combination of an uncoated carbide substrate and the TH10 grade provides a sharp, universal cutting edge that supports reduced cutting forces and cleaner surface outcomes when machining non‑ferrous alloys. The 60° triangular geometry, paired with a corner radius of 0.8 mm, balances edge strength and finishing capability, making the insert suitable for both profiling and light roughing. This results in steady tool engagement and predictable chip formation, which contributes to consistent component quality and reduced rework. Compatibility and straightforward changeover for efficient production Delivered as an ISO‑normed insert, the unit interfaces with standard triangular holders and matching underlays. Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness, so selecting the correct clamping system is essential for repeatable results. The double‑sided design doubles the usable life per index, while the cylindrical centre hole assures stable seat location and secure fixation. These attributes simplify inventory management and support fast, reproducible insert indexing during shift changes. Process benefits and economic reasoning Using a sharp, uncoated grade such as TH10 reduces cutting energy in applications where low forces are paramount; this can extend tool life and lower cycle‑time variability. The insert’s geometry and edge preparation are optimised for stable chip control and surface integrity, helping to reduce downstream finishing operations. From a cost‑effectiveness perspective, the double‑edged configuration increases the number of usable cutting edges per insert, contributing to a higher yield per item and a reduced per‑component tooling cost. Practical guidance and recommended use cases Intended primarily for turning, the insert is especially effective on aluminium, brass and other non‑ferrous materials where a sharp edge fosters good surface finish. For mixed workshops, a matching chipbreaker and grade selection should be chosen according to material, machining strategy and machine stability. For questions about holder compatibility or process setup, Metav Werkzeuge provides technical advice and can support selection of the correct clamping and underlay components to ensure safe and repeatable use. For reliable turning performance with the TH10 uncoated carbide grade, contact Metav Werkzeuge for ordering, compatibility checks and technical guidance. Technical data Article number: 6808308 Manufacturer SKU: TUN6808308 Stock SKU: 6808308-Tungaloy ISO designation: TNMG110308 Grade: TH10 Material: cemented carbide Facts Corner radius: 0.8 mm Insert size: 11 mm Thickness: 3.18 mm Cutting angle: 60° Clearance angle: 0° Special features Double-sided chipbreaker Cylindrical centre hole Triangular insert geometry ISO‑standard turning insert Sharp universal grade for non‑ferrous materials FAQ What materials is this insert best suited for? The TNMG110308 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass, offering low cutting forces and clean finishes. Is the insert reversible and how many cutting edges are available? Yes, the triangular TNMG110308 is double‑sided, providing multiple usable cutting edges per index to extend operational life. What determines compatibility with a tool holder? Compatibility is governed by the holder’s form, clearance angle, tolerance class, fastening method, insert size and thickness; the TNMG110308 is manufactured to ISO standards to support common holders. Does the uncoated TH10 grade require special speeds or feeds? The uncoated TH10 grade is intended for sharp cutting with reduced forces; recommended speeds and feeds depend on the workpiece material and machine rigidity and should be set to favour stable chip formation. Can this insert improve surface finish compared with coated grades? In many non‑ferrous applications the sharp uncoated edge of the TH10 grade yields superior surface integrity due to lower friction and reduced built‑up edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, yet stable PVD-coated carbide grade, a compact 60° triangular geometry and a 0.2 mm corner radius for reliable stainless steel turning; order directly via Metav Werkzeuge or consult the technical team for application support. TNMG110402 AH6225 Turning Insert by Tungaloy — PVD-coated carbide, 60° geometry TNMG110402 AH6225 is a triangular ISO indexable insert for turning, designed for universal use in stainless steel with a sharp and stable cutting edge for medium cutting conditions PVD-coated carbide grade AH6225 Triangular ISO geometry, 60° included angle 0° clearance angle for robust edge support Double-sided chipbreaker for versatile cuts Consistent machining for stainless steel with a universal grade The PVD-coated carbide composition of this insert, combined with the AH6225 grade, provides a reliable compromise between edge sharpness and wear resistance. This results in stable cutting performance during medium turning operations in stainless steel, even under varying conditions. The universal character of the grade reduces tool inventory complexity while maintaining repeatable surface quality, and the coating supports elevated tool life by improving abrasive and adhesive wear resistance. Secure seating and rigidity for repeatable results The triangular insert form with a 60° included angle and a 0° clearance provides strong support at the cutting edge, reducing deflection during interrupted or unstable cuts. The insert features a cylindrical hole for screw clamping and a plate thickness of 4.76 mm, ensuring secure fixation in compatible holders. As compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness, matching the insert geometry to the correct external holder guarantees process stability and repeatable mounting accuracy. Efficient edge economy and chip control for production demands This double-sided insert offers two usable edges per side and benefits from a 0.2 mm corner radius, which is suitable for finishing or light to medium roughing passes where a fine surface is required. The integrated double-sided chipbreaker supports controlled chip formation across a range of feeds and depths, helping to maintain consistent cutting forces and extend the effective life of the tool. For operations requiring quick indexation, the insert’s ISO format simplifies replacement and reduces downtime, contributing to higher overall productivity. For a reliable supply of Tungaloy TNMG110402 AH6225 inserts and application advice for stainless steel turning, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to place an order or request technical consultation Technical Data Article number: 6947341 SKU: 6947341-Tungaloy Manufacturer SKU: TUN6947341 Model series: ISO-Drehwendeschneidplatten Material: carbide Coating: PVD Core technical data Geometry designation: TNMG 110402 Inscribed circle / size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Clearance angle: 0° Hole: with hole (cylindrical) Chipbreaker: double-sided Design & special features Triangular plate form PVD-coated carbide, grade AH6225 Universal grade for stainless steel Designed for external and internal turning Compatibility depends on holder form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert intended for? This TNMG110402 AH6225 insert is developed as a universal grade primarily for stainless steel; it performs well in medium cutting conditions and variable environments. How many cutting edges are available per insert? The indexable TNMG insert is double-sided and triangular, providing multiple usable edges depending on the orientation and indexing strategy. What are the key geometric values to check when selecting a holder? Check the insert size (11 mm), thickness (4.76 mm), hole style (cylindrical) and the 60° geometry to ensure holder compatibility with TNMG110402. Does the AH6225 grade include a coating and what is its benefit? Yes, the AH6225 grade is PVD-coated, which enhances wear resistance and helps maintain a stable cutting edge over longer tool life. Is this insert suitable for finishing passes? With a 0.2 mm corner radius and a sharp, stable edge, this insert is suitable for light finishing and medium-turning operations where a good surface finish is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 AH6225 Wendeplatten - Tungaloy
Combine the PVD-coated AH6225 grade with a 0.2 mm corner radius and 0° clearance to achieve stable cutting performance in medium turning operations; order the insert directly via Metav Werkzeuge or consult our application specialists for tailored machining advice. TNMG 110402 AH6225 indexable turning insert for turning — Tungaloy A TNMG110402 AH6225 indexable turning insert engineered for reliable medium-duty external and internal turning of rostfreien Stahl under changing conditions. PVD-coated carbide grade AH6225 Universal for rostfreien Stahl Triangular insert with 0.2 mm radius Double-sided design with central cylindrical hole Consistent edge stability for productive turning The PVD-coated carbide composition of this insert delivers a balance between sharpness and robustness, making it suitable for medium machining where tool life and surface finish matter. The AH6225 grade is formulated to maintain a stable cutting edge when turning rostfreien Stahl, reducing the frequency of index changes and supporting continuous production runs. By combining a controlled chipbreaker geometry with a resilient coating, the insert promotes predictable wear behaviour, which simplifies process planning and helps maintain consistent component tolerances. Secure seating and ISO compatibility reduce setup risk As an ISO-standard indexable insert, compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The triangular plate shape and the central cylindrical hole ensure accurate seating and repeatable clamping when used with the correct clamping kit or backing pad. The specified 0° clearance and 60° geometry contribute to stable cutting forces and straightforward insert orientation, which helps prevent slippage during interrupted cuts and supports reliable repeatability across batches. Versatile chip control and application flexibility Equipped with a double-sided chipbreaker, this insert provides bidirectional use and cost-effective indexing. The 0.2 mm corner radius reduces risk of chipping while improving corner strength, which is particularly useful in variable feeds and moderate depths of cut. The insert’s universal character makes selection straightforward for shops that machine a range of components from rostfreien Stahl with differing setups, helping to streamline inventory while maintaining good surface quality and tool life. For precision turning with proven edge stability, contact Metav Werkzeuge for application recommendations or to order the Tungaloy TNMG110402 AH6225 insert through our sales team today Technical data Article number: 6947357 Manufacturer SKU: TUN6947357 Stock SKU: 6947357-Tungaloy Core specifications Series: ISO turning indexable inserts Grade: AH6225 (PVD-coated carbide) Shape/size: Triangular, size 11 Corner radius: 0.2 mm Thickness: 4.76 mm Clearance angle: 0° Rake/wedge angle: 60° Special features Double-sided with chipbreaker Central cylindrical hole for clamping Application: Turning (external and internal) Material base: Cemented carbide FAQ What materials is this insert suitable for? The TNMG110402 AH6225 insert is a universal grade intended primarily for rostfreien Stahl; the AH6225 chemistry and PVD coating are tuned for good edge stability and broad material coverage in medium cutting conditions. How does the insert mount to the holder? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; the TNMG110402 geometry with a central cylindrical hole is designed for ISO-compatible holders and clamping sets. Can the insert be used on internal and external features? Yes, the ISO-format indexable design of the TNMG110402 AH6225 supports both external and internal turning when paired with the appropriate holder or boring bar. What benefit does the 0.2 mm corner radius provide? The 0.2 mm radius improves corner strength and reduces chipping risk during interrupted cuts, extending usable edge life for the TNMG110402 AH6225 in medium-duty operations. Is this insert reversible or single-use per side? The double-sided design allows two usable edges per index, offering efficient use of the cutting material for the TNMG110402 AH6225. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 grade and a sharp yet stable cutting edge to keep medium turning operations on rostfreier Stahl running reliably; order the insert via Metav Werkzeuge or contact the consultants for application advice. TNMG 110402 AH6225 indexable turning insert — PVD-coated carbide for turning (Tungaloy) The TNMG110402 AH6225 is an ISO-standard indexable turning insert designed for external and internal turning where consistent edge performance on rostfreier Stahl is required. PVD-coated carbide AH6225 for rostfreier Stahl Sharp, stable cutting edge for medium machining ISO TNMG triangular 11 mm with 0.2 mm radius Double-sided chipbreaker with cylindrical hole Consistent performance from a PVD-coated grade The combination of a PVD-coated surface and the AH6225 grade delivers a balance between wear resistance and edge sharpness that suits variable machining conditions. For operations on rostfreier Stahl, this insert maintains a predictable tool life and stable cutting behaviour under medium cutting parameters. The coating assists in reducing built-up edge and improves thermal resistance, which results in fewer interruptions for index changes and more stable part quality during serial production. ISO geometry that simplifies holder selection and repeatability The insert's standardised ISO form and defined geometry ensure straightforward integration into existing tool systems. Critical dimensions — an 11 mm inscribed circle, 4.76 mm plate thickness, a 60° included angle and a 0.2 mm corner radius — are decisive for matching the correct external holder or boring bar. The 0° clearance angle and the cylindrical central hole support secure clamping and repeatable positioning, which reduces setup time and improves process reliability on the shop floor. Effective chip control and modular system benefits Equipped with a double-sided chipbreaker, the insert offers two usable edges, contributing to economical tooling and reduced downtime. The chipbreaker geometry supports controlled chip formation during both external and internal turning; choosing the chipbreaker style and grade according to workpiece stability enhances surface finish and reduces the risk of edge damage. The insert forms part of a practical system: ISO insert, compatible holder or boring bar, supporting shim/clamp set and spare screws — a modular approach that eases maintenance and spare-part management. For medium turning on rostfreier Stahl with a reliable PVD-coated solution from Tungaloy, contact Metav Werkzeuge for availability and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6966206 Manufacturer SKU: TUN6966206 SKU: 6966206-Tungaloy Item name: TNMG110402 AH6225 Tungaloy-Wendeplatte Facts Insert designation: TNMG110402 Included angle: 60° Corner radius: 0.2 mm Inscribed circle / size: 11 mm Plate thickness: 4.76 mm Clearance angle: 0° Hole: with hole Hole style: cylindrical hole Special features Grade/coating: AH6225 (PVD-coated carbide) Material: carbide Plate shape: triangular Chipbreaker: double-sided Typical application: external and internal turning System components: ISO insert, matching holder or boring bar, shim/clamp set, spare screws FAQ What materials is this insert suited for? The TNMG110402 AH6225 insert is specified as a universal grade for machining rostfreier Stahl, offering a balance of sharpness and edge stability for medium turning tasks. Which geometry and dimensions define compatibility with holders? Compatibility is determined by the ISO form and dimensions: 60° included angle, 11 mm inscribed circle, 4.76 mm thickness, 0.2 mm corner radius and a cylindrical central hole — these parameters guide the choice of the correct external holder or boring bar. Is the insert coated and what benefit does the coating provide? Yes — the AH6225 grade is PVD-coated, which improves wear resistance and thermal stability, helping to reduce built-up edge when machining rostfreier Stahl and extending effective edge life. How many cutting edges are available per insert and what does that mean for cost-efficiency? The insert features a double-sided chipbreaker, providing two usable edges; this doubles the number of cutting positions per insert compared with a single-sided design, improving cost-efficiency and reducing tooling change frequency. What system parts are recommended for a complete setup? A complete system typically comprises the ISO insert itself, a matching external holder or boring bar, a supporting shim/clamp set and spare screws to ensure secure clamping and quick replacement when required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated cemented carbide and a double‑sided, ISO‑normed geometry for stable, economical turning of heat‑resistant alloys; order the insert directly via Metav Werkzeuge or contact the consultants for tailored advice. TNMG 110402 AH8015 indexable insert for turning — Tungaloy A TNMG110402 AH8015 indexable turning insert engineered for ISO‑normed external and internal turning, optimised for heat‑resistant alloys and general turning operations ISO TNMG 110402 form for standard holders PVD‑coated cemented carbide AH8015 for heat‑resistant alloys Double‑sided insert with 60° wedge angle 0.2 mm corner radius for controlled chips Consistent tool life and predictable productivity for turning operations The PVD‑coated, cemented carbide grade AH8015 offers a balanced combination of wear resistance and cutting edge stability, making it a reliable choice for demanding turning tasks on heat‑resistant alloys. The coating reduces flank wear and extends service intervals, while the substrate delivers toughness under interrupted cuts. This balance results in predictable tool life and improved process economy, reducing downtime for insert changes and enabling stable machining parameters over longer production runs. Improved chip control and machining stability from geometry and chipbreaker The insert’s 0.2 mm corner radius and 60° included angle produce a compact cutting edge that lowers cutting forces and enhances surface quality when compared with larger radii. The double‑sided chipbreaker enables two usable edges per index, optimising material utilisation and cost per cutting edge. A cylindrical locating hole secures repeatable clamping position and helps achieve consistent radial and axial runout, which is crucial for fine surface finish and dimensional accuracy in external and internal turning. ISO compatibility and system‑level advantages for quick integration As part of an ISO‑normed series, compatibility with toolholders depends on form, clearance angle, tolerance class, fastening, size and thickness; this means the insert integrates readily into existing TNMG holders when those parameters match. The complete system typically comprises the ISO insert, a suitable external holder or boring bar, a sub‑base/clamping kit and replacement screws, simplifying logistics and assembly. For mixed‑material production, select the chipbreaker and grade that match part material and machine stability to extract the best balance of productivity and surface finish. Contact Metav Werkzeuge for stock availability and personalised tooling recommendations for the Tungaloy TNMG 110402 AH8015 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947360 Manufacturer SKU: TUN6947360 Seller SKU: 6947360-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: TNMG110402 AH8015 Tungaloy‑Wendeplatte Data Corner radius: 0.2 mm Included angle: 60° Plate thickness: 4.76 mm Inscribed circle / size: 11 mm Clearance angle: 0° Double‑sided: yes Special features Material: cemented carbide Coating: PVD Shape: triangular Hole: cylindrical Chipbreaker: double‑sided Application: turning FAQ What materials is this insert designed for? The AH8015 grade is a PVD‑coated cemented carbide designed primarily for heat‑resistant alloys and general turning applications, offering a balance between wear resistance and edge stability. Is the insert reversible and how many cutting edges are available? The insert is double‑sided, providing two indexed cutting edges per side as appropriate for the TNMG geometry, which improves economy and reduces tooling costs. Which holders are compatible with this ISO designation? Holders compatible with the TNMG 110402 form, matching the clearance angle, tolerance class, fastening method, size and thickness, will accept this insert for secure and repeatable clamping. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius lowers cutting forces and tends to deliver improved surface finish on turned parts while helping control burr formation on delicate edges. What benefits does the PVD coating provide? The PVD coating on AH8015 reduces flank wear and improves resistance to thermal softening, extending effective tool life and enabling higher cutting speeds in many applications. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 110402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 carbide, a 0.2 mm corner radius and ISO compatibility for consistent turning of heat‑resistant alloys — reliable edge stability and broad material coverage reduce downtime and tool changes. Order the TNMG110402 AH8015 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG110402 AH8015 ISO turning insert for Drehen — Tungaloy TNMG110402 AH8015 is a triangular ISO turning insert engineered for general external and internal turning of heat‑resistant alloys and similar materials ISO-standard triangular insert PVD-coated carbide AH8015 Corner radius 0.2 mm for fine finishing Double-sided chipbreaker, cylindrical hole Consistent performance with PVD-coated AH8015 for heat‑resistant alloys The PVD-coated grade AH8015 is designed as a balanced solution between wear resistance and edge stability, making it suitable for the general machining of heat‑resistant alloys and demanding steels. As a consequence, cycle times remain stable and tool changes are less frequent, which supports predictable production planning. The insert’s geometry delivers repeatable cutting conditions and improved surface quality on both external and internal turning operations. System compatibility and straightforward integration into ISO holder systems These ISO inserts conform to the common form and tolerance classes used in turning tool systems; compatibility to a specific holder is determined by shape, clearance angle, tolerance class, fastening method, size and thickness. The ISO-standard format simplifies spare‑part logistics and ensures the insert integrates with established holders and boring bars. Selecting the correct chipbreaker and grade for the machining task guarantees stable chip formation and reduces set‑up complexity. Cutting geometry explained: small radius, secure clamping and robust body The triangular insert features a corner radius of 0.2 mm, an included angle of 60° and a plate thickness of 4.76 mm, providing a compact edge for fine finishing and tolerance control. A cylindrical hole ensures reliable clamping and repeatable seating during tool changes. The combination of a thin land and the double‑sided chipbreaker supports controlled chip evacuation while preserving the edge, particularly useful in interrupted cuts and mixed operation sequences. Operational benefits: productivity, repeatability and reduced tool logistics Using this ISO turning insert leads to measurable productivity gains: longer effective tool life from the AH8015 coating, fewer unplanned tool exchanges, and consistent workpiece quality. The double‑sided design doubles the usable edge life per insert, improving cost‑efficiency in serial production. Clear labelling and ISO conformity also streamline inventory management and procurement. For customers seeking a balance of economy and dependable machining performance, this insert offers a pragmatic choice. For precision turning of heat‑resistant alloys, choose the Tungaloy AH8015 grade and order through Metav Werkzeuge — the team at Metav Werkzeuge can advise on holder compatibility and application parameters; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947342 Manufacturer SKU: TUN6947342 SKU: 6947342-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 60° Rake angle (free angle): 0° Hole: with cylindrical hole Special features PVD-coated grade AH8015 Material: carbide Triangular plate form Double-sided chipbreaker ISO turning insert Suitable for external and internal turning Compatible with ISO holders (form, clearance, tolerance, fastening) FAQ What materials is this insert best suited for? The TNMG110402 AH8015 insert is tailored for machining heat‑resistant alloys and similar demanding materials; the AH8015 PVD coating balances wear resistance and edge stability for general turning tasks. How does the corner radius affect finish and tolerance? A corner radius of 0.2 mm provides a fine cutting edge that improves surface finish and supports tighter dimensional control when using the TNMG110402 insert. Is the insert compatible with my existing ISO turning holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; the TNMG110402 is ISO‑standard, which simplifies matching to common holders but verification against the holder’s specifications is recommended. Can the insert be used on both internal and external turning operations? Yes, the triangular ISO design and double‑sided chipbreaker make the insert suitable for both external and internal turning operations when the correct chipbreaker and cutting parameters are selected. How many usable edges does this insert provide? The double‑sided plate offers multiple cutting edges per insert, effectively extending service life and reducing replacement frequency for serial production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, a 60° triangular geometry and a compact 0.2 mm corner radius to maintain consistent productivity when machining heat-resistant alloys; order directly via Metav Werkzeuge or ask for technical advice if needed. TNMG 110402 AH8015 — Tungaloy triangular turning insert, PVD-coated carbide TNMG110402 AH8015 is an ISO-standard indexable insert designed for turning applications where a balance of wear resistance and edge stability is required TNMG triangular 60° geometry PVD-coated carbide AH8015 grade 0.2 mm corner radius for versatile cuts Double-sided insert with cylindrical hole High-performance coating for longer tool life The PVD-coated carbide substrate in this insert delivers a clear benefit: extended service intervals through improved wear resistance without sacrificing cutting-edge integrity. The AH8015 grade is formulated as a general-purpose choice for machining heat-resistant alloys, offering a practical compromise between abrasion resistance and edge stability. PVD (physical vapour deposition) is a thin, hard film applied to the carbide to reduce adhesion and abrasion at elevated temperatures, which helps to preserve component tolerances and reduce the need for frequent index changes. Geometry and handling that save set-up time A triangular profile with a nominal 60° included angle and a modest 0.2 mm corner radius supports a wide range of turning tasks while simplifying tool selection. The double-sided design with a cylindrical hole allows two indexed cutting edges per side and secure clamping in compatible holders, making the insert both economical and straightforward to rotate when reconditioning is necessary. Because compatibility is determined by form, clearance angle, tolerance class, clamping and size, matching the insert to the correct external holder or boring bar ensures repeatable positioning and shorter machine set-up times. Material compatibility and application guidance Designed primarily for turning, the insert performs well in external and internal operations on temperature-resistant alloys where a robust edge is required. The combination of the PVD-coated surface and the carbide core helps control built-up edge and improves surface finish under moderate to demanding cutting conditions. For best results, pair the insert with a chipbreaker and grade that suit the workpiece material and the rigidity of the machine set-up; choosing the appropriate chip control reduces vibration and extends the life of both the insert and the toolholder. The insert is delivered as an ISO-format indexable part and integrates into standard ISO turning systems. Choose Tungaloy quality—contact Metav Werkzeuge for availability and application advice for this Tungaloy indexable turning insert via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6966207 Manufacturer SKU: TUN6966207 Model series: ISO turning indexable inserts Numbers / core technical data Thickness: 4.76 mm Inscribed circle / size: 11 mm Corner radius: 0.2 mm Included angle: 60° Clearance angle: 0° Special features Material: carbide Coating: PVD Grade: AH8015 Shape: triangular Hole: cylindrical Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert suitable for? The TNMG110402 AH8015 insert from Tungaloy is intended primarily for heat-resistant alloys and other demanding materials where AH8015 grade offers a balance between wear resistance and edge stability. How many cutting edges are available per insert? As a double-sided, triangular insert with a cylindrical hole, the TNMG110402 offers multiple usable cutting edges that can be indexed to extend service life. Which holders are compatible with this ISO insert? Compatibility depends on the holder form, clearance angle, tolerance class, clamping and size; the TNMG110402 fits standard ISO-format turning holders designed for TNMG-style inserts. What does the PVD coating do for performance? The PVD coating on the carbide insert reduces abrasion and adhesive wear at elevated temperatures, helping to maintain dimensional accuracy and prolong the cutting edge life of the TNMG110402 AH8015. Is the corner radius suitable for finishing passes? With a 0.2 mm corner radius, the insert is suitable for versatile cutting tasks and can be used for light finishing when the machine and set-up provide adequate rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of reliable surface finish, extended tool life and ISO compatibility for consistent turning performance; order the insert directly via Metav Werkzeuge or contact their technical consultants for compatibility checks and application advice. TNMG 110402 GT9530 turning insert — Tungaloy, coated cermet, 60° triangle A TNMG110402 GT9530 insert designed for precision external and internal turning, offering a wear-resistant coated cermet grade for productive finishing under stable conditions ISO TNMG110402 format, triangle insert GT9530 coated cermet for extended life Double-sided chipbreaker for stable cutting 0.2 mm corner radius for fine finishes Consistent finishing and long tool life for steel turning The GT9530 grade is a coated cermet solution developed for finishing to light general-purpose turning where surface quality and durability matter. The combination of cermet substrate and coating provides a hard contact surface that resists abrasive wear while maintaining a fine edge for improved finish. As an ISO-standard TNMG insert, the geometry and tolerances support predictable chip formation and repeatable results, which in turn reduces process variation on batch production runs and helps maintain consistent component tolerances. Stable cuts and surface integrity with a small corner radius Equipped with a 0.2 mm corner radius and a 60° triangular form, the insert promotes low cutting forces in finishing passes and contributes to a superior surface texture on steel workpieces. The double-sided chipbreaker geometry is tuned for stable chip control in typical turning parameters, reducing the risk of built-up edge and minimising rework. Choosing this geometry and radius yields tangible benefits in reduced vibration and improved part-to-part surface consistency during medium- to high-volume machining. System compatibility and secure clamping for reliable operation Compatibility with toolholders is defined by form, clearance, tolerance class, fastening, size and thickness; this insert is supplied with a cylindrical hole to suit common clamping systems and a plate thickness of 4.76 mm for secure seating. Integration into a turning system is straightforward: a suitable external holder or boring bar, a locating shim or clamping set and the correct replacement screw complete the assembly. The ISO designation simplifies selection and stocking, enabling faster setup and predictable repeatability across shifts. Productivity advantages and typical applications in machining Designed primarily for turning, the insert excels in external and internal turning operations on steel where a high-quality finish and longer indexable life are required under stable cutting conditions. The GT9530 grade balances wear resistance with edge stability, resulting in longer tool life compared with standard finishing grades and fewer index changes. In practice, this translates to less downtime, lower tooling consumption per part and improved throughput for batch production or precision components. For ordering, application advice or to confirm holder compatibility with this Tungaloy TNMG110402 GT9530 insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical consultation and supply arrangements Technical data Article number: 6797232 Manufacturer SKU: TUN6797232 SKU: 6797232-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TNMG110402 GT9530 Tungaloy insert Facts Size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Main angle: 60° Clearance angle: 0° ISO designation: 110402 Special features Coating/grade: GT9530 Substrate type: coated cermet Chipbreaker: double-sided Plate form: triangular Hole: with cylindrical hole Typical application: turning (external and internal) FAQ What materials is this insert best suited for? The TNMG110402 GT9530 insert is optimised for steel machining, offering a coated cermet grade that provides wear resistance and surface quality for finishing and light universals on steel. Can the insert be used for internal as well as external turning? Yes. The geometry and chipbreaker of the TNMG110402 GT9530 support both external and internal turning applications when mounted in a compatible holder. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius on this insert helps produce finer surface finishes and reduces cutting forces during finishing passes, making the GT9530 grade suitable for precision components. Is the insert compatible with standard TNMG holders? The ISO designation and the cylindrical hole mean the insert is compatible with holders that accept TNMG110402 inserts; confirm holder form, fastening and tolerance class when selecting assemblies. What advantages does the GT9530 coating provide over uncoated grades? The GT9530 coating enhances wear resistance and edge life in finishing operations, improving tool life and maintaining surface integrity over longer production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 110402 NS9530 Wendeplatten - Tungaloy
Benefit from a finishing-grade, uncoated cermet insert that delivers a sharp cutting edge, low cutting forces and consistently high surface quality; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. TNMG 110402 NS9530 Tungaloy indexable insert – turning, uncoated cermet finishing grade The TNMG110402 NS9530 is an ISO-format triangular indexable insert engineered for precision finishing during turning operations, especially when fine surface quality and stable cutting are required. NS9530 cermet for fine finishing Sharp edge for low cutting forces 11 mm triangular plate with 0.2 mm radius Double-sided chipbreaker with cylindrical hole Faster, cleaner finishing on steel with reduced cutting forces The NS9530 cutting grade is an uncoated cermet developed for finishing work on steel. Its combination of a sharp cutting edge and a low-friction substrate reduces cutting forces, which in turn lowers vibration and improves surface integrity. For production environments where continuous cuts and small depths of cut are common, this insert supports consistent part quality and fewer rework cycles. Cermet is a ceramic–metal composite that offers superior wear resistance and edge retention compared with standard carbides, while still allowing a clean shearing action for fine finishes. ISO compatibility streamlines setup and reduces downtime As an ISO-format indexable plate, the insert matches standard holders when form, relief angle, tolerance class, fastening and thickness correspond. The triangular 11 mm plate with a 0.2 mm corner radius and 4.76 mm thickness fits a wide range of external and internal turning holders. The defined 0° clearance and the 60° included angle are critical for seating and cutting geometry; these standardised dimensions make replacement straightforward, reduce setup time and support predictable tool-change cycles in high-mix production. Optimised chip control and repeatable performance Equipped with a double-sided chipbreaker, the indexable plate manages chip formation for continuous cutting conditions, promoting safer chip evacuation and consistent cutting forces. The uncoated cermet edge is particularly effective for achieving low cutting forces and high surface quality in finishing passes; the sharp edge reduces smearing and minimises machining marks. For those less familiar with chipformers, the chipbreaker is a machined feature that guides and breaks chips into short, controllable segments to protect the tool and workpiece. Practical integration into machining workflows The insert is supplied in an ISO indexable format and is intended to be used with a suitable external holder or boring bar, plus the appropriate clamp set and replacement screws as part of a complete system. This modular approach means a worn edge can be rotated or replaced quickly, restoring cutting performance without removing the holder from the machine. For production planners, the predictable life and consistent finish achievable with this grade translate into stable cycle times and fewer quality-related interruptions. For supply of the Tungaloy NS9530 finishing insert or bespoke recommendations for turning applications, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6797241 SKU: 6797241-Tungaloy Manufacturer SKU: TUN6797241 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Facts Plate size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Included angle: 60° Hole: with cylindrical hole Special features Material: carbide Cutting grade: NS9530 (uncoated cermet) Chipbreaker: double-sided Shape: triangular Application: turning (external and internal) ISO-format indexable insert compatibility FAQ Which materials is this insert recommended for? The TNMG110402 NS9530 is optimised for finishing on steel; the uncoated cermet grade delivers low cutting forces and a fine surface on continuous cuts in steel. Is the insert coated or uncoated? This indexable plate is an uncoated cermet grade (NS9530), chosen for its sharp cutting edge and edge retention in finishing operations. How does the chipbreaker affect machining? The double-sided chipbreaker on the insert controls chip shape and evacuation, reducing the risk of long, entangling chips and promoting stable cutting forces for a consistent surface finish. What holder and clamping features are required? Compatibility depends on ISO form, clearance angle, tolerance class, fastening method, plate size and thickness; use a matching ISO holder or boring bar and the correct clamp set for secure seating. Can edges be rotated to extend life? Yes, the triangular, double-sided design allows multiple indexing positions so the cutting edge can be rotated or replaced quickly to reduce downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com